diff options
Diffstat (limited to 'drivers/input/touchscreen/ili210x.c')
-rw-r--r-- | drivers/input/touchscreen/ili210x.c | 559 |
1 files changed, 548 insertions, 11 deletions
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c index 30576a5f2f04..2bd407d86bae 100644 --- a/drivers/input/touchscreen/ili210x.c +++ b/drivers/input/touchscreen/ili210x.c @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only +#include <linux/crc-ccitt.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> +#include <linux/ihex.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> @@ -12,7 +14,7 @@ #include <linux/slab.h> #include <asm/unaligned.h> -#define ILI2XXX_POLL_PERIOD 20 +#define ILI2XXX_POLL_PERIOD 15 #define ILI210X_DATA_SIZE 64 #define ILI211X_DATA_SIZE 43 @@ -22,8 +24,23 @@ /* Touchscreen commands */ #define REG_TOUCHDATA 0x10 #define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_PROTOCOL_VERSION 0x42 +#define REG_KERNEL_VERSION 0x61 +#define REG_IC_BUSY 0x80 +#define REG_IC_BUSY_NOT_BUSY 0x50 +#define REG_GET_MODE 0xc0 +#define REG_GET_MODE_AP 0x5a +#define REG_GET_MODE_BL 0x55 +#define REG_SET_MODE_AP 0xc1 +#define REG_SET_MODE_BL 0xc2 +#define REG_WRITE_DATA 0xc3 +#define REG_WRITE_ENABLE 0xc4 +#define REG_READ_DATA_CRC 0xc7 #define REG_CALIBRATE 0xcc +#define ILI251X_FW_FILENAME "ilitek/ili251x.bin" + struct ili2xxx_chip { int (*read_reg)(struct i2c_client *client, u8 reg, void *buf, size_t len); @@ -35,6 +52,7 @@ struct ili2xxx_chip { unsigned int max_touches; unsigned int resolution; bool has_calibrate_reg; + bool has_firmware_proto; bool has_pressure_reg; }; @@ -44,6 +62,10 @@ struct ili210x { struct gpio_desc *reset_gpio; struct touchscreen_properties prop; const struct ili2xxx_chip *chip; + u8 version_firmware[8]; + u8 version_kernel[5]; + u8 version_proto[2]; + u8 ic_mode[2]; bool stop; }; @@ -202,15 +224,17 @@ static const struct ili2xxx_chip ili212x_chip = { .has_calibrate_reg = true, }; -static int ili251x_read_reg(struct i2c_client *client, - u8 reg, void *buf, size_t len) +static int ili251x_read_reg_common(struct i2c_client *client, + u8 reg, void *buf, size_t len, + unsigned int delay) { int error; int ret; ret = i2c_master_send(client, ®, 1); if (ret == 1) { - usleep_range(5000, 5500); + if (delay) + usleep_range(delay, delay + 500); ret = i2c_master_recv(client, buf, len); if (ret == len) @@ -222,12 +246,18 @@ static int ili251x_read_reg(struct i2c_client *client, return ret; } +static int ili251x_read_reg(struct i2c_client *client, + u8 reg, void *buf, size_t len) +{ + return ili251x_read_reg_common(client, reg, buf, len, 5000); +} + static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) { int error; - error = ili251x_read_reg(client, REG_TOUCHDATA, - data, ILI251X_DATA_SIZE1); + error = ili251x_read_reg_common(client, REG_TOUCHDATA, + data, ILI251X_DATA_SIZE1, 0); if (!error && data[0] == 2) { error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, ILI251X_DATA_SIZE2); @@ -268,6 +298,7 @@ static const struct ili2xxx_chip ili251x_chip = { .continue_polling = ili251x_check_continue_polling, .max_touches = 10, .has_calibrate_reg = true, + .has_firmware_proto = true, .has_pressure_reg = true, }; @@ -303,10 +334,13 @@ static irqreturn_t ili210x_irq(int irq, void *irq_data) const struct ili2xxx_chip *chip = priv->chip; u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; bool keep_polling; + ktime_t time_next; + s64 time_delta; bool touch; int error; do { + time_next = ktime_add_ms(ktime_get(), ILI2XXX_POLL_PERIOD); error = chip->get_touch_data(client, touchdata); if (error) { dev_err(&client->dev, @@ -316,13 +350,201 @@ static irqreturn_t ili210x_irq(int irq, void *irq_data) touch = ili210x_report_events(priv, touchdata); keep_polling = chip->continue_polling(touchdata, touch); - if (keep_polling) - msleep(ILI2XXX_POLL_PERIOD); + if (keep_polling) { + time_delta = ktime_us_delta(time_next, ktime_get()); + if (time_delta > 0) + usleep_range(time_delta, time_delta + 1000); + } } while (!priv->stop && keep_polling); return IRQ_HANDLED; } +static int ili251x_firmware_update_resolution(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u16 resx, resy; + u8 rs[10]; + int error; + + /* The firmware update blob might have changed the resolution. */ + error = priv->chip->read_reg(client, REG_PANEL_INFO, &rs, sizeof(rs)); + if (error) + return error; + + resx = le16_to_cpup((__le16 *)rs); + resy = le16_to_cpup((__le16 *)(rs + 2)); + + /* The value reported by the firmware is invalid. */ + if (!resx || resx == 0xffff || !resy || resy == 0xffff) + return -EINVAL; + + input_abs_set_max(priv->input, ABS_X, resx - 1); + input_abs_set_max(priv->input, ABS_Y, resy - 1); + input_abs_set_max(priv->input, ABS_MT_POSITION_X, resx - 1); + input_abs_set_max(priv->input, ABS_MT_POSITION_Y, resy - 1); + + return 0; +} + +static ssize_t ili251x_firmware_update_firmware_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 fw[8]; + + /* Get firmware version */ + error = priv->chip->read_reg(client, REG_FIRMWARE_VERSION, + &fw, sizeof(fw)); + if (!error) + memcpy(priv->version_firmware, fw, sizeof(fw)); + + return error; +} + +static ssize_t ili251x_firmware_update_kernel_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 kv[5]; + + /* Get kernel version */ + error = priv->chip->read_reg(client, REG_KERNEL_VERSION, + &kv, sizeof(kv)); + if (!error) + memcpy(priv->version_kernel, kv, sizeof(kv)); + + return error; +} + +static ssize_t ili251x_firmware_update_protocol_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 pv[2]; + + /* Get protocol version */ + error = priv->chip->read_reg(client, REG_PROTOCOL_VERSION, + &pv, sizeof(pv)); + if (!error) + memcpy(priv->version_proto, pv, sizeof(pv)); + + return error; +} + +static ssize_t ili251x_firmware_update_ic_mode(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 md[2]; + + /* Get chip boot mode */ + error = priv->chip->read_reg(client, REG_GET_MODE, &md, sizeof(md)); + if (!error) + memcpy(priv->ic_mode, md, sizeof(md)); + + return error; +} + +static int ili251x_firmware_update_cached_state(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + + if (!priv->chip->has_firmware_proto) + return 0; + + /* Wait for firmware to boot and stabilize itself. */ + msleep(200); + + /* Firmware does report valid information. */ + error = ili251x_firmware_update_resolution(dev); + if (error) + return error; + + error = ili251x_firmware_update_firmware_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_kernel_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_protocol_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_ic_mode(dev); + if (error) + return error; + + return 0; +} + +static ssize_t ili251x_firmware_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *fw = priv->version_firmware; + + return sysfs_emit(buf, "%02x%02x.%02x%02x.%02x%02x.%02x%02x\n", + fw[0], fw[1], fw[2], fw[3], + fw[4], fw[5], fw[6], fw[7]); +} +static DEVICE_ATTR(firmware_version, 0444, ili251x_firmware_version_show, NULL); + +static ssize_t ili251x_kernel_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *kv = priv->version_kernel; + + return sysfs_emit(buf, "%02x.%02x.%02x.%02x.%02x\n", + kv[0], kv[1], kv[2], kv[3], kv[4]); +} +static DEVICE_ATTR(kernel_version, 0444, ili251x_kernel_version_show, NULL); + +static ssize_t ili251x_protocol_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *pv = priv->version_proto; + + return sysfs_emit(buf, "%02x.%02x\n", pv[0], pv[1]); +} +static DEVICE_ATTR(protocol_version, 0444, ili251x_protocol_version_show, NULL); + +static ssize_t ili251x_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *md = priv->ic_mode; + char *mode = "AP"; + + if (md[0] == REG_GET_MODE_AP) /* Application Mode */ + mode = "AP"; + else if (md[0] == REG_GET_MODE_BL) /* BootLoader Mode */ + mode = "BL"; + else /* Unknown Mode */ + mode = "??"; + + return sysfs_emit(buf, "%02x.%02x:%s\n", md[0], md[1], mode); +} +static DEVICE_ATTR(mode, 0444, ili251x_mode_show, NULL); + static ssize_t ili210x_calibrate(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -349,24 +571,333 @@ static ssize_t ili210x_calibrate(struct device *dev, } static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); +static int ili251x_firmware_to_buffer(const struct firmware *fw, + u8 **buf, u16 *ac_end, u16 *df_end) +{ + const struct ihex_binrec *rec; + u32 fw_addr, fw_last_addr = 0; + u16 fw_len; + u8 *fw_buf; + int error; + + /* + * The firmware ihex blob can never be bigger than 64 kiB, so make this + * simple -- allocate a 64 kiB buffer, iterate over the ihex blob records + * once, copy them all into this buffer at the right locations, and then + * do all operations on this linear buffer. + */ + fw_buf = kzalloc(SZ_64K, GFP_KERNEL); + if (!fw_buf) + return -ENOMEM; + + rec = (const struct ihex_binrec *)fw->data; + while (rec) { + fw_addr = be32_to_cpu(rec->addr); + fw_len = be16_to_cpu(rec->len); + + /* The last 32 Byte firmware block can be 0xffe0 */ + if (fw_addr + fw_len > SZ_64K || fw_addr > SZ_64K - 32) { + error = -EFBIG; + goto err_big; + } + + /* Find the last address before DF start address, that is AC end */ + if (fw_addr == 0xf000) + *ac_end = fw_last_addr; + fw_last_addr = fw_addr + fw_len; + + memcpy(fw_buf + fw_addr, rec->data, fw_len); + rec = ihex_next_binrec(rec); + } + + /* DF end address is the last address in the firmware blob */ + *df_end = fw_addr + fw_len; + *buf = fw_buf; + return 0; + +err_big: + kfree(fw_buf); + return error; +} + +/* Switch mode between Application and BootLoader */ +static int ili251x_switch_ic_mode(struct i2c_client *client, u8 cmd_mode) +{ + struct ili210x *priv = i2c_get_clientdata(client); + u8 cmd_wren[3] = { REG_WRITE_ENABLE, 0x5a, 0xa5 }; + u8 md[2]; + int error; + + error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); + if (error) + return error; + /* Mode already set */ + if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || + (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) + return 0; + + /* Unlock writes */ + error = i2c_master_send(client, cmd_wren, sizeof(cmd_wren)); + if (error != sizeof(cmd_wren)) + return -EINVAL; + + mdelay(20); + + /* Select mode (BootLoader or Application) */ + error = i2c_master_send(client, &cmd_mode, 1); + if (error != 1) + return -EINVAL; + + mdelay(200); /* Reboot into bootloader takes a lot of time ... */ + + /* Read back mode */ + error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); + if (error) + return error; + /* Check if mode is correct now. */ + if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || + (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) + return 0; + + return -EINVAL; +} + +static int ili251x_firmware_busy(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + int error, i = 0; + u8 data; + + do { + /* The read_reg already contains suitable delay */ + error = priv->chip->read_reg(client, REG_IC_BUSY, &data, 1); + if (error) + return error; + if (i++ == 100000) + return -ETIMEDOUT; + } while (data != REG_IC_BUSY_NOT_BUSY); + + return 0; +} + +static int ili251x_firmware_write_to_ic(struct device *dev, u8 *fwbuf, + u16 start, u16 end, u8 dataflash) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 cmd_crc = REG_READ_DATA_CRC; + u8 crcrb[4] = { 0 }; + u8 fw_data[33]; + u16 fw_addr; + int error; + + /* + * The DF (dataflash) needs 2 bytes offset for unknown reasons, + * the AC (application) has 2 bytes CRC16-CCITT at the end. + */ + u16 crc = crc_ccitt(0, fwbuf + start + (dataflash ? 2 : 0), + end - start - 2); + + /* Unlock write to either AC (application) or DF (dataflash) area */ + u8 cmd_wr[10] = { + REG_WRITE_ENABLE, 0x5a, 0xa5, dataflash, + (end >> 16) & 0xff, (end >> 8) & 0xff, end & 0xff, + (crc >> 16) & 0xff, (crc >> 8) & 0xff, crc & 0xff + }; + + error = i2c_master_send(client, cmd_wr, sizeof(cmd_wr)); + if (error != sizeof(cmd_wr)) + return -EINVAL; + + error = ili251x_firmware_busy(client); + if (error) + return error; + + for (fw_addr = start; fw_addr < end; fw_addr += 32) { + fw_data[0] = REG_WRITE_DATA; + memcpy(&(fw_data[1]), fwbuf + fw_addr, 32); + error = i2c_master_send(client, fw_data, 33); + if (error != sizeof(fw_data)) + return error; + error = ili251x_firmware_busy(client); + if (error) + return error; + } + + error = i2c_master_send(client, &cmd_crc, 1); + if (error != 1) + return -EINVAL; + + error = ili251x_firmware_busy(client); + if (error) + return error; + + error = priv->chip->read_reg(client, REG_READ_DATA_CRC, + &crcrb, sizeof(crcrb)); + if (error) + return error; + + /* Check CRC readback */ + if ((crcrb[0] != (crc & 0xff)) || crcrb[1] != ((crc >> 8) & 0xff)) + return -EINVAL; + + return 0; +} + +static int ili251x_firmware_reset(struct i2c_client *client) +{ + u8 cmd_reset[2] = { 0xf2, 0x01 }; + int error; + + error = i2c_master_send(client, cmd_reset, sizeof(cmd_reset)); + if (error != sizeof(cmd_reset)) + return -EINVAL; + + return ili251x_firmware_busy(client); +} + +static void ili251x_hardware_reset(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + + /* Reset the controller */ + gpiod_set_value_cansleep(priv->reset_gpio, 1); + usleep_range(10000, 15000); + gpiod_set_value_cansleep(priv->reset_gpio, 0); + msleep(300); +} + +static ssize_t ili210x_firmware_update_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + const char *fwname = ILI251X_FW_FILENAME; + const struct firmware *fw; + u16 ac_end, df_end; + u8 *fwbuf; + int error; + int i; + + error = request_ihex_firmware(&fw, fwname, dev); + if (error) { + dev_err(dev, "Failed to request firmware %s, error=%d\n", + fwname, error); + return error; + } + + error = ili251x_firmware_to_buffer(fw, &fwbuf, &ac_end, &df_end); + release_firmware(fw); + if (error) + return error; + + /* + * Disable touchscreen IRQ, so that we would not get spurious touch + * interrupt during firmware update, and so that the IRQ handler won't + * trigger and interfere with the firmware update. There is no bit in + * the touch controller to disable the IRQs during update, so we have + * to do it this way here. + */ + disable_irq(client->irq); + + dev_dbg(dev, "Firmware update started, firmware=%s\n", fwname); + + ili251x_hardware_reset(dev); + + error = ili251x_firmware_reset(client); + if (error) + goto exit; + + /* This may not succeed on first try, so re-try a few times. */ + for (i = 0; i < 5; i++) { + error = ili251x_switch_ic_mode(client, REG_SET_MODE_BL); + if (!error) + break; + } + + if (error) + goto exit; + + dev_dbg(dev, "IC is now in BootLoader mode\n"); + + msleep(200); /* The bootloader seems to need some time too. */ + + error = ili251x_firmware_write_to_ic(dev, fwbuf, 0xf000, df_end, 1); + if (error) { + dev_err(dev, "DF firmware update failed, error=%d\n", error); + goto exit; + } + + dev_dbg(dev, "DataFlash firmware written\n"); + + error = ili251x_firmware_write_to_ic(dev, fwbuf, 0x2000, ac_end, 0); + if (error) { + dev_err(dev, "AC firmware update failed, error=%d\n", error); + goto exit; + } + + dev_dbg(dev, "Application firmware written\n"); + + /* This may not succeed on first try, so re-try a few times. */ + for (i = 0; i < 5; i++) { + error = ili251x_switch_ic_mode(client, REG_SET_MODE_AP); + if (!error) + break; + } + + if (error) + goto exit; + + dev_dbg(dev, "IC is now in Application mode\n"); + + error = ili251x_firmware_update_cached_state(dev); + if (error) + goto exit; + + error = count; + +exit: + ili251x_hardware_reset(dev); + dev_dbg(dev, "Firmware update ended, error=%i\n", error); + enable_irq(client->irq); + kfree(fwbuf); + return error; +} + +static DEVICE_ATTR(firmware_update, 0200, NULL, ili210x_firmware_update_store); + static struct attribute *ili210x_attributes[] = { &dev_attr_calibrate.attr, + &dev_attr_firmware_update.attr, + &dev_attr_firmware_version.attr, + &dev_attr_kernel_version.attr, + &dev_attr_protocol_version.attr, + &dev_attr_mode.attr, NULL, }; -static umode_t ili210x_calibrate_visible(struct kobject *kobj, +static umode_t ili210x_attributes_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct i2c_client *client = to_i2c_client(dev); struct ili210x *priv = i2c_get_clientdata(client); - return priv->chip->has_calibrate_reg ? attr->mode : 0; + /* Calibrate is present on all ILI2xxx which have calibrate register */ + if (attr == &dev_attr_calibrate.attr) + return priv->chip->has_calibrate_reg ? attr->mode : 0; + + /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */ + if (!priv->chip->has_firmware_proto) + return 0; + + return attr->mode; } static const struct attribute_group ili210x_attr_group = { .attrs = ili210x_attributes, - .is_visible = ili210x_calibrate_visible, + .is_visible = ili210x_attributes_visible, }; static void ili210x_power_down(void *data) @@ -449,6 +980,12 @@ static int ili210x_i2c_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); if (priv->chip->has_pressure_reg) input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0); + error = ili251x_firmware_update_cached_state(dev); + if (error) { + dev_err(dev, "Unable to cache firmware information, err: %d\n", + error); + return error; + } touchscreen_parse_properties(input, true, &priv->prop); error = input_mt_init_slots(input, priv->chip->max_touches, |