diff options
Diffstat (limited to 'drivers/iio/common/st_sensors/st_sensors_trigger.c')
| -rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_trigger.c | 31 |
1 files changed, 17 insertions, 14 deletions
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 0507283bd4c1..2dbd2646e44e 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -23,35 +23,31 @@ * @sdata: Sensor data. * * returns: - * 0 - no new samples available - * 1 - new samples available - * negative - error or unknown + * false - no new samples available or read error + * true - new samples available */ -static int st_sensors_new_samples_available(struct iio_dev *indio_dev, - struct st_sensor_data *sdata) +static bool st_sensors_new_samples_available(struct iio_dev *indio_dev, + struct st_sensor_data *sdata) { int ret, status; /* How would I know if I can't check it? */ if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) - return -EINVAL; + return true; /* No scan mask, no interrupt */ if (!indio_dev->active_scan_mask) - return 0; + return false; ret = regmap_read(sdata->regmap, sdata->sensor_settings->drdy_irq.stat_drdy.addr, &status); if (ret < 0) { dev_err(sdata->dev, "error checking samples available\n"); - return ret; + return false; } - if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask) - return 1; - - return 0; + return !!(status & sdata->sensor_settings->drdy_irq.stat_drdy.mask); } /** @@ -180,9 +176,15 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, /* Tell the interrupt handler that we're dealing with edges */ if (irq_trig == IRQF_TRIGGER_FALLING || - irq_trig == IRQF_TRIGGER_RISING) + irq_trig == IRQF_TRIGGER_RISING) { + if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) { + dev_err(&indio_dev->dev, + "edge IRQ not supported w/o stat register.\n"); + err = -EOPNOTSUPP; + goto iio_trigger_free; + } sdata->edge_irq = true; - else + } else { /* * If we're not using edges (i.e. level interrupts) we * just mask off the IRQ, handle one interrupt, then @@ -190,6 +192,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, * interrupt handler top half again and start over. */ irq_trig |= IRQF_ONESHOT; + } /* * If the interrupt pin is Open Drain, by definition this |