diff options
Diffstat (limited to 'drivers/iio/adc/stx104.c')
-rw-r--r-- | drivers/iio/adc/stx104.c | 86 |
1 files changed, 57 insertions, 29 deletions
diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c index 55bd2dc514e9..48a91a95e597 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/adc/stx104.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> +#include <linux/types.h> #define STX104_OUT_CHAN(chan) { \ .type = IIO_VOLTAGE, \ @@ -45,13 +46,35 @@ module_param_hw_array(base, uint, ioport, &num_stx104, 0); MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); /** + * struct stx104_reg - device register structure + * @ssr_ad: Software Strobe Register and ADC Data + * @achan: ADC Channel + * @dio: Digital I/O + * @dac: DAC Channels + * @cir_asr: Clear Interrupts and ADC Status + * @acr: ADC Control + * @pccr_fsh: Pacer Clock Control and FIFO Status MSB + * @acfg: ADC Configuration + */ +struct stx104_reg { + u16 ssr_ad; + u8 achan; + u8 dio; + u16 dac[2]; + u8 cir_asr; + u8 acr; + u8 pccr_fsh; + u8 acfg; +}; + +/** * struct stx104_iio - IIO device private data structure * @chan_out_states: channels' output states - * @base: base port address of the IIO device + * @reg: I/O address offset for the device registers */ struct stx104_iio { unsigned int chan_out_states[STX104_NUM_OUT_CHAN]; - unsigned int base; + struct stx104_reg __iomem *reg; }; /** @@ -64,7 +87,7 @@ struct stx104_iio { struct stx104_gpio { struct gpio_chip chip; spinlock_t lock; - unsigned int base; + u8 __iomem *base; unsigned int out_state; }; @@ -72,6 +95,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct stx104_iio *const priv = iio_priv(indio_dev); + struct stx104_reg __iomem *const reg = priv->reg; unsigned int adc_config; int adbu; int gain; @@ -79,7 +103,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: /* get gain configuration */ - adc_config = inb(priv->base + 11); + adc_config = ioread8(®->acfg); gain = adc_config & 0x3; *val = 1 << gain; @@ -91,24 +115,26 @@ static int stx104_read_raw(struct iio_dev *indio_dev, } /* select ADC channel */ - outb(chan->channel | (chan->channel << 4), priv->base + 2); + iowrite8(chan->channel | (chan->channel << 4), ®->achan); - /* trigger ADC sample capture and wait for completion */ - outb(0, priv->base); - while (inb(priv->base + 8) & BIT(7)); + /* trigger ADC sample capture by writing to the 8-bit + * Software Strobe Register and wait for completion + */ + iowrite8(0, ®->ssr_ad); + while (ioread8(®->cir_asr) & BIT(7)); - *val = inw(priv->base); + *val = ioread16(®->ssr_ad); return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: /* get ADC bipolar/unipolar configuration */ - adc_config = inb(priv->base + 11); + adc_config = ioread8(®->acfg); adbu = !(adc_config & BIT(2)); *val = -32768 * adbu; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: /* get ADC bipolar/unipolar and gain configuration */ - adc_config = inb(priv->base + 11); + adc_config = ioread8(®->acfg); adbu = !(adc_config & BIT(2)); gain = adc_config & 0x3; @@ -130,16 +156,16 @@ static int stx104_write_raw(struct iio_dev *indio_dev, /* Only four gain states (x1, x2, x4, x8) */ switch (val) { case 1: - outb(0, priv->base + 11); + iowrite8(0, &priv->reg->acfg); break; case 2: - outb(1, priv->base + 11); + iowrite8(1, &priv->reg->acfg); break; case 4: - outb(2, priv->base + 11); + iowrite8(2, &priv->reg->acfg); break; case 8: - outb(3, priv->base + 11); + iowrite8(3, &priv->reg->acfg); break; default: return -EINVAL; @@ -153,7 +179,7 @@ static int stx104_write_raw(struct iio_dev *indio_dev, return -EINVAL; priv->chan_out_states[chan->channel] = val; - outw(val, priv->base + 4 + 2 * chan->channel); + iowrite16(val, &priv->reg->dac[chan->channel]); return 0; } @@ -222,7 +248,7 @@ static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) if (offset >= 4) return -EINVAL; - return !!(inb(stx104gpio->base) & BIT(offset)); + return !!(ioread8(stx104gpio->base) & BIT(offset)); } static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, @@ -230,7 +256,7 @@ static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, { struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); - *bits = inb(stx104gpio->base); + *bits = ioread8(stx104gpio->base); return 0; } @@ -252,7 +278,7 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, else stx104gpio->out_state &= ~mask; - outb(stx104gpio->out_state, stx104gpio->base); + iowrite8(stx104gpio->out_state, stx104gpio->base); spin_unlock_irqrestore(&stx104gpio->lock, flags); } @@ -279,7 +305,7 @@ static void stx104_gpio_set_multiple(struct gpio_chip *chip, stx104gpio->out_state &= ~*mask; stx104gpio->out_state |= *mask & *bits; - outb(stx104gpio->out_state, stx104gpio->base); + iowrite8(stx104gpio->out_state, stx104gpio->base); spin_unlock_irqrestore(&stx104gpio->lock, flags); } @@ -306,11 +332,16 @@ static int stx104_probe(struct device *dev, unsigned int id) return -EBUSY; } + priv = iio_priv(indio_dev); + priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT); + if (!priv->reg) + return -ENOMEM; + indio_dev->info = &stx104_info; indio_dev->modes = INDIO_DIRECT_MODE; /* determine if differential inputs */ - if (inb(base[id] + 8) & BIT(5)) { + if (ioread8(&priv->reg->cir_asr) & BIT(5)) { indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff); indio_dev->channels = stx104_channels_diff; } else { @@ -320,18 +351,15 @@ static int stx104_probe(struct device *dev, unsigned int id) indio_dev->name = dev_name(dev); - priv = iio_priv(indio_dev); - priv->base = base[id]; - /* configure device for software trigger operation */ - outb(0, base[id] + 9); + iowrite8(0, &priv->reg->acr); /* initialize gain setting to x1 */ - outb(0, base[id] + 11); + iowrite8(0, &priv->reg->acfg); /* initialize DAC output to 0V */ - outw(0, base[id] + 4); - outw(0, base[id] + 6); + iowrite16(0, &priv->reg->dac[0]); + iowrite16(0, &priv->reg->dac[1]); stx104gpio->chip.label = dev_name(dev); stx104gpio->chip.parent = dev; @@ -346,7 +374,7 @@ static int stx104_probe(struct device *dev, unsigned int id) stx104gpio->chip.get_multiple = stx104_gpio_get_multiple; stx104gpio->chip.set = stx104_gpio_set; stx104gpio->chip.set_multiple = stx104_gpio_set_multiple; - stx104gpio->base = base[id] + 3; + stx104gpio->base = &priv->reg->dio; stx104gpio->out_state = 0x0; spin_lock_init(&stx104gpio->lock); |