diff options
Diffstat (limited to 'drivers/iio/accel')
| -rw-r--r-- | drivers/iio/accel/Kconfig | 24 | ||||
| -rw-r--r-- | drivers/iio/accel/Makefile | 2 | ||||
| -rw-r--r-- | drivers/iio/accel/adis16201.c | 321 | ||||
| -rw-r--r-- | drivers/iio/accel/adis16209.c | 330 | ||||
| -rw-r--r-- | drivers/iio/accel/bmc150-accel-core.c | 23 | ||||
| -rw-r--r-- | drivers/iio/accel/sca3000.c | 13 | ||||
| -rw-r--r-- | drivers/iio/accel/st_accel_i2c.c | 1 |
7 files changed, 685 insertions, 29 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index c6d9517d7611..62ae7e5abcfa 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -5,6 +5,30 @@ menu "Accelerometers" +config ADIS16201 + tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16201 dual-axis + digital inclinometer and accelerometer. + + To compile this driver as a module, say M here: the module will + be called adis16201. + +config ADIS16209 + tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer + and accelerometer. + + To compile this driver as a module, say M here: the module will be + called adis16209. + config ADXL345 tristate diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 368aedb6377a..636d4d1b2990 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,8 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ADIS16201) += adis16201.o +obj-$(CONFIG_ADIS16209) += adis16209.o obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c new file mode 100644 index 000000000000..4c1d482ea73a --- /dev/null +++ b/drivers/iio/accel/adis16201.c @@ -0,0 +1,321 @@ +/* + * ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> + +#include <linux/iio/iio.h> +#include <linux/iio/imu/adis.h> + +#define ADIS16201_STARTUP_DELAY_MS 220 +#define ADIS16201_FLASH_CNT 0x00 + +/* Data Output Register Information */ +#define ADIS16201_SUPPLY_OUT_REG 0x02 +#define ADIS16201_XACCL_OUT_REG 0x04 +#define ADIS16201_YACCL_OUT_REG 0x06 +#define ADIS16201_AUX_ADC_REG 0x08 +#define ADIS16201_TEMP_OUT_REG 0x0A +#define ADIS16201_XINCL_OUT_REG 0x0C +#define ADIS16201_YINCL_OUT_REG 0x0E + +/* Calibration Register Definition */ +#define ADIS16201_XACCL_OFFS_REG 0x10 +#define ADIS16201_YACCL_OFFS_REG 0x12 +#define ADIS16201_XACCL_SCALE_REG 0x14 +#define ADIS16201_YACCL_SCALE_REG 0x16 +#define ADIS16201_XINCL_OFFS_REG 0x18 +#define ADIS16201_YINCL_OFFS_REG 0x1A +#define ADIS16201_XINCL_SCALE_REG 0x1C +#define ADIS16201_YINCL_SCALE_REG 0x1E + +/* Alarm Register Definition */ +#define ADIS16201_ALM_MAG1_REG 0x20 +#define ADIS16201_ALM_MAG2_REG 0x22 +#define ADIS16201_ALM_SMPL1_REG 0x24 +#define ADIS16201_ALM_SMPL2_REG 0x26 +#define ADIS16201_ALM_CTRL_REG 0x28 + +#define ADIS16201_AUX_DAC_REG 0x30 +#define ADIS16201_GPIO_CTRL_REG 0x32 +#define ADIS16201_SMPL_PRD_REG 0x36 +/* Operation, filter configuration */ +#define ADIS16201_AVG_CNT_REG 0x38 +#define ADIS16201_SLP_CNT_REG 0x3A + +/* Miscellaneous Control Register Definition */ +#define ADIS16201_MSC_CTRL_REG 0x34 +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8) +/* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2) +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH BIT(1) +/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0) + +/* Diagnostics System Status Register Definition */ +#define ADIS16201_DIAG_STAT_REG 0x3C +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9) +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8) +#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3 +#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2 +/* Power supply above 3.625 V */ +#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1 +/* Power supply below 3.15 V */ +#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0 + +/* System Command Register Definition */ +#define ADIS16201_GLOB_CMD_REG 0x3E +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1) + +#define ADIS16201_ERROR_ACTIVE BIT(14) + +enum adis16201_scan { + ADIS16201_SCAN_ACC_X, + ADIS16201_SCAN_ACC_Y, + ADIS16201_SCAN_INCLI_X, + ADIS16201_SCAN_INCLI_Y, + ADIS16201_SCAN_SUPPLY, + ADIS16201_SCAN_AUX_ADC, + ADIS16201_SCAN_TEMP, +}; + +static const u8 adis16201_addresses[] = { + [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS_REG, + [ADIS16201_SCAN_ACC_Y] = ADIS16201_YACCL_OFFS_REG, + [ADIS16201_SCAN_INCLI_X] = ADIS16201_XINCL_OFFS_REG, + [ADIS16201_SCAN_INCLI_Y] = ADIS16201_YINCL_OFFS_REG, +}; + +static int adis16201_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int ret; + int bits; + u8 addr; + s16 val16; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, + ADIS16201_ERROR_ACTIVE, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->channel == 0) { + /* Voltage base units are mV hence 1.22 mV */ + *val = 1; + *val2 = 220000; + } else { + /* Voltage base units are mV hence 0.61 mV */ + *val = 0; + *val2 = 610000; + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = -470; + *val2 = 0; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + /* + * IIO base unit for sensitivity of accelerometer + * is milli g. + * 1 LSB represents 0.244 mg. + */ + *val = 0; + *val2 = IIO_G_TO_M_S_2(462400); + return IIO_VAL_INT_PLUS_NANO; + case IIO_INCLI: + *val = 0; + *val2 = 100000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* + * The raw ADC value is 1278 when the temperature + * is 25 degrees and the scale factor per milli + * degree celcius is -470. + */ + *val = 25000 / -470 - 1278; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ACCEL: + bits = 12; + break; + case IIO_INCLI: + bits = 9; + break; + default: + return -EINVAL; + } + addr = adis16201_addresses[chan->scan_index]; + ret = adis_read_reg_16(st, addr, &val16); + if (ret) + return ret; + + *val = sign_extend32(val16, bits - 1); + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int adis16201_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int m; + + if (mask != IIO_CHAN_INFO_CALIBBIAS) + return -EINVAL; + + switch (chan->type) { + case IIO_ACCEL: + m = GENMASK(11, 0); + break; + case IIO_INCLI: + m = GENMASK(8, 0); + break; + default: + return -EINVAL; + } + + return adis_write_reg_16(st, adis16201_addresses[chan->scan_index], + val & m); +} + +static const struct iio_chan_spec adis16201_channels[] = { + ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT_REG, ADIS16201_SCAN_SUPPLY, 0, + 12), + ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT_REG, ADIS16201_SCAN_TEMP, 0, 12), + ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT_REG, ADIS16201_SCAN_ACC_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT_REG, ADIS16201_SCAN_ACC_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12), + ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + IIO_CHAN_SOFT_TIMESTAMP(7) +}; + +static const struct iio_info adis16201_info = { + .read_raw = adis16201_read_raw, + .write_raw = adis16201_write_raw, + .update_scan_mode = adis_update_scan_mode, +}; + +static const char * const adis16201_status_error_msgs[] = { + [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", + [ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed", + [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V", + [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V", +}; + +static const struct adis_data adis16201_data = { + .read_delay = 20, + .msc_ctrl_reg = ADIS16201_MSC_CTRL_REG, + .glob_cmd_reg = ADIS16201_GLOB_CMD_REG, + .diag_stat_reg = ADIS16201_DIAG_STAT_REG, + + .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, + .startup_delay = ADIS16201_STARTUP_DELAY_MS, + + .status_error_msgs = adis16201_status_error_msgs, + .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) | + BIT(ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT) | + BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) | + BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT), +}; + +static int adis16201_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + indio_dev->name = spi->dev.driver->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adis16201_info; + + indio_dev->channels = adis16201_channels; + indio_dev->num_channels = ARRAY_SIZE(adis16201_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis_init(st, indio_dev, spi, &adis16201_data); + if (ret) + return ret; + + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL); + if (ret) + return ret; + + ret = adis_initial_startup(st); + if (ret) + goto error_cleanup_buffer_trigger; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto error_cleanup_buffer_trigger; + + return 0; + +error_cleanup_buffer_trigger: + adis_cleanup_buffer_and_trigger(st, indio_dev); + return ret; +} + +static int adis16201_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adis *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + adis_cleanup_buffer_and_trigger(st, indio_dev); + + return 0; +} + +static struct spi_driver adis16201_driver = { + .driver = { + .name = "adis16201", + }, + .probe = adis16201_probe, + .remove = adis16201_remove, +}; +module_spi_driver(adis16201_driver); + +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:adis16201"); diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c new file mode 100644 index 000000000000..f2dc3a5f0463 --- /dev/null +++ b/drivers/iio/accel/adis16209.c @@ -0,0 +1,330 @@ +/* + * ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include <linux/iio/iio.h> +#include <linux/iio/imu/adis.h> + +#define ADIS16209_STARTUP_DELAY_MS 220 +#define ADIS16209_FLASH_CNT_REG 0x00 + +/* Data Output Register Definitions */ +#define ADIS16209_SUPPLY_OUT_REG 0x02 +#define ADIS16209_XACCL_OUT_REG 0x04 +#define ADIS16209_YACCL_OUT_REG 0x06 +/* Output, auxiliary ADC input */ +#define ADIS16209_AUX_ADC_REG 0x08 +/* Output, temperature */ +#define ADIS16209_TEMP_OUT_REG 0x0A +/* Output, +/- 90 degrees X-axis inclination */ +#define ADIS16209_XINCL_OUT_REG 0x0C +#define ADIS16209_YINCL_OUT_REG 0x0E +/* Output, +/-180 vertical rotational position */ +#define ADIS16209_ROT_OUT_REG 0x10 + +/* + * Calibration Register Definitions. + * Acceleration, inclination or rotation offset null. + */ +#define ADIS16209_XACCL_NULL_REG 0x12 +#define ADIS16209_YACCL_NULL_REG 0x14 +#define ADIS16209_XINCL_NULL_REG 0x16 +#define ADIS16209_YINCL_NULL_REG 0x18 +#define ADIS16209_ROT_NULL_REG 0x1A + +/* Alarm Register Definitions */ +#define ADIS16209_ALM_MAG1_REG 0x20 +#define ADIS16209_ALM_MAG2_REG 0x22 +#define ADIS16209_ALM_SMPL1_REG 0x24 +#define ADIS16209_ALM_SMPL2_REG 0x26 +#define ADIS16209_ALM_CTRL_REG 0x28 + +#define ADIS16209_AUX_DAC_REG 0x30 +#define ADIS16209_GPIO_CTRL_REG 0x32 +#define ADIS16209_SMPL_PRD_REG 0x36 +#define ADIS16209_AVG_CNT_REG 0x38 +#define ADIS16209_SLP_CNT_REG 0x3A + +#define ADIS16209_MSC_CTRL_REG 0x34 +#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) +#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) +#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) +#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) + +#define ADIS16209_STAT_REG 0x3C +#define ADIS16209_STAT_ALARM2 BIT(9) +#define ADIS16209_STAT_ALARM1 BIT(8) +#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5 +#define ADIS16209_STAT_SPI_FAIL_BIT 3 +#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2 +/* Power supply above 3.625 V */ +#define ADIS16209_STAT_POWER_HIGH_BIT 1 +/* Power supply below 3.15 V */ +#define ADIS16209_STAT_POWER_LOW_BIT 0 + +#define ADIS16209_CMD_REG 0x3E +#define ADIS16209_CMD_SW_RESET BIT(7) +#define ADIS16209_CMD_CLEAR_STAT BIT(4) +#define ADIS16209_CMD_FACTORY_CAL BIT(1) + +#define ADIS16209_ERROR_ACTIVE BIT(14) + +enum adis16209_scan { + ADIS16209_SCAN_SUPPLY, + ADIS16209_SCAN_ACC_X, + ADIS16209_SCAN_ACC_Y, + ADIS16209_SCAN_AUX_ADC, + ADIS16209_SCAN_TEMP, + ADIS16209_SCAN_INCLI_X, + ADIS16209_SCAN_INCLI_Y, + ADIS16209_SCAN_ROT, +}; + +static const u8 adis16209_addresses[8][1] = { + [ADIS16209_SCAN_SUPPLY] = { }, + [ADIS16209_SCAN_AUX_ADC] = { }, + [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG }, + [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG }, + [ADIS16209_SCAN_ROT] = { }, + [ADIS16209_SCAN_TEMP] = { }, +}; + +static int adis16209_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int m; + + if (mask != IIO_CHAN_INFO_CALIBBIAS) + return -EINVAL; + + switch (chan->type) { + case IIO_ACCEL: + case IIO_INCLI: + m = GENMASK(13, 0); + break; + default: + return -EINVAL; + } + + return adis_write_reg_16(st, adis16209_addresses[chan->scan_index][0], + val & m); +} + +static int adis16209_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int ret; + int bits; + u8 addr; + s16 val16; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, + ADIS16209_ERROR_ACTIVE, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + *val = 0; + switch (chan->channel) { + case 0: + *val2 = 305180; /* 0.30518 mV */ + break; + case 1: + *val2 = 610500; /* 0.6105 mV */ + break; + default: + return -EINVAL; + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = -470; + *val2 = 0; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + /* + * IIO base unit for sensitivity of accelerometer + * is milli g. + * 1 LSB represents 0.244 mg. + */ + *val = 0; + *val2 = IIO_G_TO_M_S_2(244140); + return IIO_VAL_INT_PLUS_NANO; + case IIO_INCLI: + case IIO_ROT: + /* + * IIO base units for rotation are degrees. + * 1 LSB represents 0.025 milli degrees. + */ + *val = 0; + *val2 = 25000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* + * The raw ADC value is 0x4FE when the temperature + * is 45 degrees and the scale factor per milli + * degree celcius is -470. + */ + *val = 25000 / -470 - 0x4FE; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ACCEL: + bits = 14; + break; + default: + return -EINVAL; + } + addr = adis16209_addresses[chan->scan_index][0]; + ret = adis_read_reg_16(st, addr, &val16); + if (ret) + return ret; + + *val = sign_extend32(val16, bits - 1); + return IIO_VAL_INT; + } + return -EINVAL; +} + +static const struct iio_chan_spec adis16209_channels[] = { + ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY, + 0, 14), + ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12), + ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12), + ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X, + 0, 0, 14), + ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y, + 0, 0, 14), + ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14), + IIO_CHAN_SOFT_TIMESTAMP(8) +}; + +static const struct iio_info adis16209_info = { + .read_raw = adis16209_read_raw, + .write_raw = adis16209_write_raw, + .update_scan_mode = adis_update_scan_mode, +}; + +static const char * const adis16209_status_error_msgs[] = { + [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure", + [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure", + [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed", + [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V", + [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V", +}; + +static const struct adis_data adis16209_data = { + .read_delay = 30, + .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG, + .glob_cmd_reg = ADIS16209_CMD_REG, + .diag_stat_reg = ADIS16209_STAT_REG, + + .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, + .startup_delay = ADIS16209_STARTUP_DELAY_MS, + + .status_error_msgs = adis16209_status_error_msgs, + .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) | + BIT(ADIS16209_STAT_SPI_FAIL_BIT) | + BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) | + BIT(ADIS16209_STAT_POWER_HIGH_BIT) | + BIT(ADIS16209_STAT_POWER_LOW_BIT), +}; + +static int adis16209_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + indio_dev->name = spi->dev.driver->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adis16209_info; + indio_dev->channels = adis16209_channels; + indio_dev->num_channels = ARRAY_SIZE(adis16209_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis_init(st, indio_dev, spi, &adis16209_data); + if (ret) + return ret; + + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL); + if (ret) + return ret; + + ret = adis_initial_startup(st); + if (ret) + goto error_cleanup_buffer_trigger; + ret = iio_device_register(indio_dev); + if (ret) + goto error_cleanup_buffer_trigger; + + return 0; + +error_cleanup_buffer_trigger: + adis_cleanup_buffer_and_trigger(st, indio_dev); + return ret; +} + +static int adis16209_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adis *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + adis_cleanup_buffer_and_trigger(st, indio_dev); + + return 0; +} + +static struct spi_driver adis16209_driver = { + .driver = { + .name = "adis16209", + }, + .probe = adis16209_probe, + .remove = adis16209_remove, +}; +module_spi_driver(adis16209_driver); + +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:adis16209"); diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 208f2d9f0e8a..383c802eb5b8 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -837,29 +837,12 @@ static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, int sample_length = 3 * 2; int ret; int total_length = samples * sample_length; - int i; - size_t step = regmap_get_raw_read_max(data->regmap); - - if (!step || step > total_length) - step = total_length; - else if (step < total_length) - step = sample_length; - - /* - * Seems we have a bus with size limitation so we have to execute - * multiple reads - */ - for (i = 0; i < total_length; i += step) { - ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, - &buffer[i], step); - if (ret) - break; - } + ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, + buffer, total_length); if (ret) dev_err(dev, - "Error transferring data from fifo in single steps of %zu\n", - step); + "Error transferring data from fifo: %d\n", ret); return ret; } diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c index f33dadf7b262..4dceb75e3586 100644 --- a/drivers/iio/accel/sca3000.c +++ b/drivers/iio/accel/sca3000.c @@ -1277,7 +1277,7 @@ static int sca3000_configure_ring(struct iio_dev *indio_dev) { struct iio_buffer *buffer; - buffer = iio_kfifo_allocate(); + buffer = devm_iio_kfifo_allocate(&indio_dev->dev); if (!buffer) return -ENOMEM; @@ -1287,11 +1287,6 @@ static int sca3000_configure_ring(struct iio_dev *indio_dev) return 0; } -static void sca3000_unconfigure_ring(struct iio_dev *indio_dev) -{ - iio_kfifo_free(indio_dev->buffer); -} - static inline int __sca3000_hw_ring_state_set(struct iio_dev *indio_dev, bool state) { @@ -1486,7 +1481,9 @@ static int sca3000_probe(struct spi_device *spi) } indio_dev->modes = INDIO_DIRECT_MODE; - sca3000_configure_ring(indio_dev); + ret = sca3000_configure_ring(indio_dev); + if (ret) + return ret; if (spi->irq) { ret = request_threaded_irq(spi->irq, @@ -1546,8 +1543,6 @@ static int sca3000_remove(struct spi_device *spi) if (spi->irq) free_irq(spi->irq, indio_dev); - sca3000_unconfigure_ring(indio_dev); - return 0; } diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 6bdec8c451e0..056dddb27236 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -107,6 +107,7 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id st_accel_acpi_match[] = { + {"SMO8840", LNG2DM}, {"SMO8A90", LNG2DM}, { }, }; |