diff options
Diffstat (limited to 'drivers/i2c')
37 files changed, 1040 insertions, 483 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 7bb65a4369e1..72c94c60fdd1 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for the i2c core. # diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 45a3f3ca29b3..009345d8f49d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -198,6 +198,11 @@ config I2C_CHT_WC SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC found on some Intel Cherry Trail systems. + Note this controller is hooked up to a TI bq24292i charger-IC, + combined with a FUSB302 Type-C port-controller as such it is advised + to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m + (the fusb302 driver currently is in drivers/staging). + config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 47f3ac9a695a..2ce8576540a2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for the i2c bus drivers. # diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 284f8670dbeb..7d4aeb4465b3 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -27,6 +27,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/slab.h> /* I2C Register */ @@ -132,6 +133,7 @@ struct aspeed_i2c_bus { struct i2c_adapter adap; struct device *dev; void __iomem *base; + struct reset_control *rst; /* Synchronizes I/O mem access to base. */ spinlock_t lock; struct completion cmd_complete; @@ -847,6 +849,14 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) /* We just need the clock rate, we don't actually use the clk object. */ devm_clk_put(&pdev->dev, parent_clk); + bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL); + if (IS_ERR(bus->rst)) { + dev_err(&pdev->dev, + "missing or invalid reset controller device tree entry"); + return PTR_ERR(bus->rst); + } + reset_control_deassert(bus->rst); + ret = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &bus->bus_frequency); if (ret < 0) { @@ -917,6 +927,8 @@ static int aspeed_i2c_remove_bus(struct platform_device *pdev) spin_unlock_irqrestore(&bus->lock, flags); + reset_control_assert(bus->rst); + i2c_del_adapter(&bus->adap); return 0; diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 190bbbc7bfee..44cffad43701 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -16,6 +16,7 @@ * GNU General Public License for more details. */ +#include <linux/acpi.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/i2c.h> @@ -25,6 +26,7 @@ #include <linux/mfd/intel_soc_pmic.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/power/bq24190_charger.h> #include <linux/slab.h> #define CHT_WC_I2C_CTRL 0x5e24 @@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; +static const char * const bq24190_suppliers[] = { "fusb302-typec-source" }; + static const struct property_entry bq24190_props[] = { - PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; +static struct regulator_consumer_supply fusb302_consumer = { + .supply = "vbus", + /* Must match fusb302 dev_name in intel_cht_int33fe.c */ + .dev_name = "i2c-fusb302", +}; + +static const struct regulator_init_data bq24190_vbus_init_data = { + .constraints = { + /* The name is used in intel_cht_int33fe.c do not change. */ + .name = "cht_wc_usb_typec_vbus", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &fusb302_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq24190_platform_data bq24190_pdata = { + .regulator_init_data = &bq24190_vbus_init_data, +}; + static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); @@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) struct i2c_board_info board_info = { .type = "bq24190", .addr = 0x6b, + .dev_name = "bq24190", .properties = bq24190_props, + .platform_data = &bq24190_pdata, }; int ret, reg, irq; @@ -314,11 +340,21 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) if (ret) goto remove_irq_domain; - board_info.irq = adap->client_irq; - adap->client = i2c_new_device(&adap->adapter, &board_info); - if (!adap->client) { - ret = -ENOMEM; - goto del_adapter; + /* + * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, + * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 + * USB Type-C controller connected to another i2c bus. In this setup + * the max17047 and fusb302 devices are enumerated through an INT33FE + * ACPI device. If this device is present register an i2c-client for + * the TI bq24292i charger. + */ + if (acpi_dev_present("INT33FE", NULL, -1)) { + board_info.irq = adap->client_irq; + adap->client = i2c_new_device(&adap->adapter, &board_info); + if (!adap->client) { + ret = -ENOMEM; + goto del_adapter; + } } platform_set_drvdata(pdev, adap); @@ -335,14 +371,15 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) { struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); - i2c_unregister_device(adap->client); + if (adap->client) + i2c_unregister_device(adap->client); i2c_del_adapter(&adap->adapter); irq_domain_remove(adap->irq_domain); return 0; } -static struct platform_device_id cht_wc_i2c_adap_id_table[] = { +static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { { .name = "cht_wcove_ext_chgr" }, {}, }; diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index b8c43535f16c..2ead9b9eebb7 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/of_device.h> #include <linux/platform_data/i2c-davinci.h> +#include <linux/pm_runtime.h> /* ----- global defines ----------------------------------------------- */ @@ -122,6 +123,9 @@ /* set the SDA GPIO low */ #define DAVINCI_I2C_DCLR_PDCLR1 BIT(1) +/* timeout for pm runtime autosuspend */ +#define DAVINCI_I2C_PM_TIMEOUT 1000 /* ms */ + struct davinci_i2c_dev { struct device *dev; void __iomem *base; @@ -500,7 +504,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) /* This should be 0 if all bytes were transferred * or dev->cmd_err denotes an error. */ - dev_err(dev->dev, "abnormal termination buf_len=%i\n", + dev_err(dev->dev, "abnormal termination buf_len=%zu\n", dev->buf_len); dev->terminate = 1; wmb(); @@ -541,10 +545,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); + ret = pm_runtime_get_sync(dev->dev); + if (ret < 0) { + dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret); + pm_runtime_put_noidle(dev->dev); + return ret; + } + ret = i2c_davinci_wait_bus_not_busy(dev); if (ret < 0) { dev_warn(dev->dev, "timeout waiting for bus ready\n"); - return ret; + goto out; } for (i = 0; i < num; i++) { @@ -552,14 +563,19 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, ret); if (ret < 0) - return ret; + goto out; } + ret = num; #ifdef CONFIG_CPU_FREQ complete(&dev->xfr_complete); #endif - return num; +out: + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + return ret; } static u32 i2c_davinci_func(struct i2c_adapter *adap) @@ -599,6 +615,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) int count = 0; u16 w; + if (pm_runtime_suspended(dev->dev)) + return IRQ_NONE; + while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); if (count++ == 100) { @@ -802,13 +821,24 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) return PTR_ERR(dev->clk); - clk_prepare_enable(dev->clk); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(dev->base)) { - r = PTR_ERR(dev->base); - goto err_unuse_clocks; + return PTR_ERR(dev->base); + } + + pm_runtime_set_autosuspend_delay(dev->dev, + DAVINCI_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(dev->dev); + + pm_runtime_enable(dev->dev); + + r = pm_runtime_get_sync(dev->dev); + if (r < 0) { + dev_err(dev->dev, "failed to runtime_get device: %d\n", r); + pm_runtime_put_noidle(dev->dev); + return r; } i2c_davinci_init(dev); @@ -849,27 +879,40 @@ static int davinci_i2c_probe(struct platform_device *pdev) if (r) goto err_unuse_clocks; + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + return 0; err_unuse_clocks: - clk_disable_unprepare(dev->clk); - dev->clk = NULL; + pm_runtime_dont_use_autosuspend(dev->dev); + pm_runtime_put_sync(dev->dev); + pm_runtime_disable(dev->dev); + return r; } static int davinci_i2c_remove(struct platform_device *pdev) { struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); + int ret; i2c_davinci_cpufreq_deregister(dev); i2c_del_adapter(&dev->adapter); - clk_disable_unprepare(dev->clk); - dev->clk = NULL; + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); + return ret; + } davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); + pm_runtime_dont_use_autosuspend(dev->dev); + pm_runtime_put_sync(dev->dev); + pm_runtime_disable(dev->dev); + return 0; } @@ -880,7 +923,6 @@ static int davinci_i2c_suspend(struct device *dev) /* put I2C into reset */ davinci_i2c_reset_ctrl(i2c_dev, 0); - clk_disable_unprepare(i2c_dev->clk); return 0; } @@ -889,7 +931,6 @@ static int davinci_i2c_resume(struct device *dev) { struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev); - clk_prepare_enable(i2c_dev->clk); /* take I2C out of reset */ davinci_i2c_reset_ctrl(i2c_dev, 1); @@ -899,6 +940,8 @@ static int davinci_i2c_resume(struct device *dev) static const struct dev_pm_ops davinci_i2c_pm = { .suspend = davinci_i2c_suspend, .resume = davinci_i2c_resume, + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; #define davinci_i2c_pm_ops (&davinci_i2c_pm) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9fee4c054d3d..21bf619a86c5 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -280,6 +280,8 @@ struct dw_i2c_dev { int (*acquire_lock)(struct dw_i2c_dev *dev); void (*release_lock)(struct dw_i2c_dev *dev); bool pm_disabled; + bool suspended; + bool skip_resume; void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0e65b97842b4..58add69a441c 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -249,6 +249,14 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id) } } +static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev) +{ + pm_runtime_disable(dev->dev); + + if (dev->pm_disabled) + pm_runtime_put_noidle(dev->dev); +} + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -257,7 +265,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) u32 acpi_speed, ht = 0; struct resource *mem; int i, irq, ret; - const int supported_speeds[] = { 0, 100000, 400000, 1000000, 3400000 }; + static const int supported_speeds[] = { + 0, 100000, 400000, 1000000, 3400000 + }; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -362,14 +372,17 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->dev.of_node = pdev->dev.of_node; - if (dev->pm_disabled) { - pm_runtime_forbid(&pdev->dev); - } else { - pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - } + /* The code below assumes runtime PM to be disabled. */ + WARN_ON(pm_runtime_enabled(&pdev->dev)); + + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + + if (dev->pm_disabled) + pm_runtime_get_noresume(&pdev->dev); + + pm_runtime_enable(&pdev->dev); if (dev->mode == DW_IC_SLAVE) ret = i2c_dw_probe_slave(dev); @@ -382,8 +395,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) return ret; exit_probe: - if (!dev->pm_disabled) - pm_runtime_disable(&pdev->dev); + dw_i2c_plat_pm_cleanup(dev); exit_reset: if (!IS_ERR_OR_NULL(dev->rst)) reset_control_assert(dev->rst); @@ -402,8 +414,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); - if (!dev->pm_disabled) - pm_runtime_disable(&pdev->dev); + dw_i2c_plat_pm_cleanup(dev); + if (!IS_ERR_OR_NULL(dev->rst)) reset_control_assert(dev->rst); @@ -437,13 +449,20 @@ static void dw_i2c_plat_complete(struct device *dev) #endif #ifdef CONFIG_PM -static int dw_i2c_plat_runtime_suspend(struct device *dev) +static int dw_i2c_plat_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + if (i_dev->suspended) { + i_dev->skip_resume = true; + return 0; + } + i_dev->disable(i_dev); i2c_dw_plat_prepare_clk(i_dev, false); + i_dev->suspended = true; + return 0; } @@ -451,27 +470,27 @@ static int dw_i2c_plat_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + if (!i_dev->suspended) + return 0; + + if (i_dev->skip_resume) { + i_dev->skip_resume = false; + return 0; + } + i2c_dw_plat_prepare_clk(i_dev, true); i_dev->init(i_dev); - return 0; -} + i_dev->suspended = false; -#ifdef CONFIG_PM_SLEEP -static int dw_i2c_plat_suspend(struct device *dev) -{ - pm_runtime_resume(dev); - return dw_i2c_plat_runtime_suspend(dev); + return 0; } -#endif static const struct dev_pm_ops dw_i2c_dev_pm_ops = { .prepare = dw_i2c_plat_prepare, .complete = dw_i2c_plat_complete, - SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) - SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, - dw_i2c_plat_resume, - NULL) + SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) + SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL) }; #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 0ef8fcc6ac3a..d80ea6ce91bb 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -14,27 +14,17 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> struct i2c_gpio_private_data { + struct gpio_desc *sda; + struct gpio_desc *scl; struct i2c_adapter adap; struct i2c_algo_bit_data bit_data; struct i2c_gpio_platform_data pdata; }; -/* Toggle SDA by changing the direction of the pin */ -static void i2c_gpio_setsda_dir(void *data, int state) -{ - struct i2c_gpio_platform_data *pdata = data; - - if (state) - gpio_direction_input(pdata->sda_pin); - else - gpio_direction_output(pdata->sda_pin, 0); -} - /* * Toggle SDA by changing the output value of the pin. This is only * valid for pins configured as open drain (i.e. setting the value @@ -42,20 +32,9 @@ static void i2c_gpio_setsda_dir(void *data, int state) */ static void i2c_gpio_setsda_val(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; - - gpio_set_value(pdata->sda_pin, state); -} - -/* Toggle SCL by changing the direction of the pin. */ -static void i2c_gpio_setscl_dir(void *data, int state) -{ - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - if (state) - gpio_direction_input(pdata->scl_pin); - else - gpio_direction_output(pdata->scl_pin, 0); + gpiod_set_value(priv->sda, state); } /* @@ -66,44 +45,23 @@ static void i2c_gpio_setscl_dir(void *data, int state) */ static void i2c_gpio_setscl_val(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - gpio_set_value(pdata->scl_pin, state); + gpiod_set_value(priv->scl, state); } static int i2c_gpio_getsda(void *data) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - return gpio_get_value(pdata->sda_pin); + return gpiod_get_value(priv->sda); } static int i2c_gpio_getscl(void *data) { - struct i2c_gpio_platform_data *pdata = data; - - return gpio_get_value(pdata->scl_pin); -} - -static int of_i2c_gpio_get_pins(struct device_node *np, - unsigned int *sda_pin, unsigned int *scl_pin) -{ - if (of_gpio_count(np) < 2) - return -ENODEV; - - *sda_pin = of_get_gpio(np, 0); - *scl_pin = of_get_gpio(np, 1); - - if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) { - pr_err("%pOF: invalid GPIO pins, sda=%d/scl=%d\n", - np, *sda_pin, *scl_pin); - return -ENODEV; - } + struct i2c_gpio_private_data *priv = data; - return 0; + return gpiod_get_value(priv->scl); } static void of_i2c_gpio_get_props(struct device_node *np, @@ -124,72 +82,105 @@ static void of_i2c_gpio_get_props(struct device_node *np, of_property_read_bool(np, "i2c-gpio,scl-output-only"); } +static struct gpio_desc *i2c_gpio_get_desc(struct device *dev, + const char *con_id, + unsigned int index, + enum gpiod_flags gflags) +{ + struct gpio_desc *retdesc; + int ret; + + retdesc = devm_gpiod_get(dev, con_id, gflags); + if (!IS_ERR(retdesc)) { + dev_dbg(dev, "got GPIO from name %s\n", con_id); + return retdesc; + } + + retdesc = devm_gpiod_get_index(dev, NULL, index, gflags); + if (!IS_ERR(retdesc)) { + dev_dbg(dev, "got GPIO from index %u\n", index); + return retdesc; + } + + ret = PTR_ERR(retdesc); + + /* FIXME: hack in the old code, is this really necessary? */ + if (ret == -EINVAL) + retdesc = ERR_PTR(-EPROBE_DEFER); + + /* This happens if the GPIO driver is not yet probed, let's defer */ + if (ret == -ENOENT) + retdesc = ERR_PTR(-EPROBE_DEFER); + + if (ret != -EPROBE_DEFER) + dev_err(dev, "error trying to get descriptor: %d\n", ret); + + return retdesc; +} + static int i2c_gpio_probe(struct platform_device *pdev) { struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; - unsigned int sda_pin, scl_pin; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + enum gpiod_flags gflags; int ret; - /* First get the GPIO pins; if it fails, we'll defer the probe. */ - if (pdev->dev.of_node) { - ret = of_i2c_gpio_get_pins(pdev->dev.of_node, - &sda_pin, &scl_pin); - if (ret) - return ret; - } else { - if (!dev_get_platdata(&pdev->dev)) - return -ENXIO; - pdata = dev_get_platdata(&pdev->dev); - sda_pin = pdata->sda_pin; - scl_pin = pdata->scl_pin; - } - - ret = devm_gpio_request(&pdev->dev, sda_pin, "sda"); - if (ret) { - if (ret == -EINVAL) - ret = -EPROBE_DEFER; /* Try again later */ - return ret; - } - ret = devm_gpio_request(&pdev->dev, scl_pin, "scl"); - if (ret) { - if (ret == -EINVAL) - ret = -EPROBE_DEFER; /* Try again later */ - return ret; - } - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; + adap = &priv->adap; bit_data = &priv->bit_data; pdata = &priv->pdata; - if (pdev->dev.of_node) { - pdata->sda_pin = sda_pin; - pdata->scl_pin = scl_pin; - of_i2c_gpio_get_props(pdev->dev.of_node, pdata); + if (np) { + of_i2c_gpio_get_props(np, pdata); } else { - memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata)); + /* + * If all platform data settings are zero it is OK + * to not provide any platform data from the board. + */ + if (dev_get_platdata(dev)) + memcpy(pdata, dev_get_platdata(dev), sizeof(*pdata)); } - if (pdata->sda_is_open_drain) { - gpio_direction_output(pdata->sda_pin, 1); - bit_data->setsda = i2c_gpio_setsda_val; - } else { - gpio_direction_input(pdata->sda_pin); - bit_data->setsda = i2c_gpio_setsda_dir; - } + /* + * First get the GPIO pins; if it fails, we'll defer the probe. + * If the SDA line is marked from platform data or device tree as + * "open drain" it means something outside of our control is making + * this line being handled as open drain, and we should just handle + * it as any other output. Else we enforce open drain as this is + * required for an I2C bus. + */ + if (pdata->sda_is_open_drain) + gflags = GPIOD_OUT_HIGH; + else + gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; + priv->sda = i2c_gpio_get_desc(dev, "sda", 0, gflags); + if (IS_ERR(priv->sda)) + return PTR_ERR(priv->sda); + + /* + * If the SCL line is marked from platform data or device tree as + * "open drain" it means something outside of our control is making + * this line being handled as open drain, and we should just handle + * it as any other output. Else we enforce open drain as this is + * required for an I2C bus. + */ + if (pdata->scl_is_open_drain) + gflags = GPIOD_OUT_LOW; + else + gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags); + if (IS_ERR(priv->scl)) + return PTR_ERR(priv->scl); - if (pdata->scl_is_open_drain || pdata->scl_is_output_only) { - gpio_direction_output(pdata->scl_pin, 1); - bit_data->setscl = i2c_gpio_setscl_val; - } else { - gpio_direction_input(pdata->scl_pin); - bit_data->setscl = i2c_gpio_setscl_dir; - } + bit_data->setsda = i2c_gpio_setsda_val; + bit_data->setscl = i2c_gpio_setscl_val; if (!pdata->scl_is_output_only) bit_data->getscl = i2c_gpio_getscl; @@ -207,18 +198,18 @@ static int i2c_gpio_probe(struct platform_device *pdev) else bit_data->timeout = HZ / 10; /* 100 ms */ - bit_data->data = pdata; + bit_data->data = priv; adap->owner = THIS_MODULE; - if (pdev->dev.of_node) - strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); + if (np) + strlcpy(adap->name, dev_name(dev), sizeof(adap->name)); else snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); adap->algo_data = bit_data; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - adap->dev.parent = &pdev->dev; - adap->dev.of_node = pdev->dev.of_node; + adap->dev.parent = dev; + adap->dev.of_node = np; adap->nr = pdev->id; ret = i2c_bit_add_numbered_bus(adap); @@ -227,8 +218,13 @@ static int i2c_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", - pdata->sda_pin, pdata->scl_pin, + /* + * FIXME: using global GPIO numbers is not helpful. If/when we + * get accessors to get the actual name of the GPIO line, + * from the descriptor, then provide that instead. + */ + dev_info(dev, "using lines %u (SDA) and %u (SCL%s)\n", + desc_to_gpio(priv->sda), desc_to_gpio(priv->scl), pdata->scl_is_output_only ? ", no clock stretching" : ""); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 9e12a53ef7b8..8eac00efadc1 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1617,6 +1617,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Default timeout in interrupt mode: 200 ms */ priv->adapter.timeout = HZ / 5; + if (dev->irq == IRQ_NOTCONNECTED) + priv->features &= ~FEATURE_IRQ; + if (priv->features & FEATURE_IRQ) { u16 pcictl, pcists; diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index eb1d91b986fd..f038858b6c54 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -82,6 +82,7 @@ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/timer.h> @@ -280,6 +281,8 @@ #define ISR_COMPLETE(err) (ISR_COMPLETE_M | (ISR_STATUS_M & (err))) #define ISR_FATAL(err) (ISR_COMPLETE(err) | ISR_FATAL_M) +#define IMG_I2C_PM_TIMEOUT 1000 /* ms */ + enum img_i2c_mode { MODE_INACTIVE, MODE_RAW, @@ -408,6 +411,9 @@ struct img_i2c { unsigned int raw_timeout; }; +static int img_i2c_runtime_suspend(struct device *dev); +static int img_i2c_runtime_resume(struct device *dev); + static void img_i2c_writel(struct img_i2c *i2c, u32 offset, u32 value) { writel(value, i2c->base + offset); @@ -826,9 +832,9 @@ next_atomic_cmd: * Timer function to check if something has gone wrong in automatic mode (so we * don't have to handle so many interrupts just to catch an exception). */ -static void img_i2c_check_timer(unsigned long arg) +static void img_i2c_check_timer(struct timer_list *t) { - struct img_i2c *i2c = (struct img_i2c *)arg; + struct img_i2c *i2c = from_timer(i2c, t, check_timer); unsigned long flags; unsigned int line_status; @@ -1054,8 +1060,8 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, atomic = true; } - ret = clk_prepare_enable(i2c->scb_clk); - if (ret) + ret = pm_runtime_get_sync(adap->dev.parent); + if (ret < 0) return ret; for (i = 0; i < num; i++) { @@ -1131,7 +1137,8 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, break; } - clk_disable_unprepare(i2c->scb_clk); + pm_runtime_mark_last_busy(adap->dev.parent); + pm_runtime_put_autosuspend(adap->dev.parent); return i2c->msg_status ? i2c->msg_status : num; } @@ -1149,12 +1156,13 @@ static const struct i2c_algorithm img_i2c_algo = { static int img_i2c_init(struct img_i2c *i2c) { unsigned int clk_khz, bitrate_khz, clk_period, tckh, tckl, tsdh; - unsigned int i, ret, data, prescale, inc, int_bitrate, filt; + unsigned int i, data, prescale, inc, int_bitrate, filt; struct img_i2c_timings timing; u32 rev; + int ret; - ret = clk_prepare_enable(i2c->scb_clk); - if (ret) + ret = pm_runtime_get_sync(i2c->adap.dev.parent); + if (ret < 0) return ret; rev = img_i2c_readl(i2c, SCB_CORE_REV_REG); @@ -1163,7 +1171,8 @@ static int img_i2c_init(struct img_i2c *i2c) "Unknown hardware revision (%d.%d.%d.%d)\n", (rev >> 24) & 0xff, (rev >> 16) & 0xff, (rev >> 8) & 0xff, rev & 0xff); - clk_disable_unprepare(i2c->scb_clk); + pm_runtime_mark_last_busy(i2c->adap.dev.parent); + pm_runtime_put_autosuspend(i2c->adap.dev.parent); return -EINVAL; } @@ -1314,7 +1323,8 @@ static int img_i2c_init(struct img_i2c *i2c) /* Perform a synchronous sequence to reset the bus */ ret = img_i2c_reset_bus(i2c); - clk_disable_unprepare(i2c->scb_clk); + pm_runtime_mark_last_busy(i2c->adap.dev.parent); + pm_runtime_put_autosuspend(i2c->adap.dev.parent); return ret; } @@ -1362,8 +1372,7 @@ static int img_i2c_probe(struct platform_device *pdev) } /* Set up the exception check timer */ - setup_timer(&i2c->check_timer, img_i2c_check_timer, - (unsigned long)i2c); + timer_setup(&i2c->check_timer, img_i2c_check_timer, 0); i2c->bitrate = timings[0].max_bitrate; if (!of_property_read_u32(node, "clock-frequency", &val)) @@ -1384,22 +1393,30 @@ static int img_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); - ret = clk_prepare_enable(i2c->sys_clk); - if (ret) - return ret; + pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + ret = img_i2c_runtime_resume(&pdev->dev); + if (ret) + return ret; + } ret = img_i2c_init(i2c); if (ret) - goto disable_clk; + goto rpm_disable; ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) - goto disable_clk; + goto rpm_disable; return 0; -disable_clk: - clk_disable_unprepare(i2c->sys_clk); +rpm_disable: + if (!pm_runtime_enabled(&pdev->dev)) + img_i2c_runtime_suspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); return ret; } @@ -1408,19 +1425,55 @@ static int img_i2c_remove(struct platform_device *dev) struct img_i2c *i2c = platform_get_drvdata(dev); i2c_del_adapter(&i2c->adap); + pm_runtime_disable(&dev->dev); + if (!pm_runtime_status_suspended(&dev->dev)) + img_i2c_runtime_suspend(&dev->dev); + + return 0; +} + +static int img_i2c_runtime_suspend(struct device *dev) +{ + struct img_i2c *i2c = dev_get_drvdata(dev); + + clk_disable_unprepare(i2c->scb_clk); clk_disable_unprepare(i2c->sys_clk); return 0; } +static int img_i2c_runtime_resume(struct device *dev) +{ + struct img_i2c *i2c = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(i2c->sys_clk); + if (ret) { + dev_err(dev, "Unable to enable sys clock\n"); + return ret; + } + + ret = clk_prepare_enable(i2c->scb_clk); + if (ret) { + dev_err(dev, "Unable to enable scb clock\n"); + clk_disable_unprepare(i2c->sys_clk); + return ret; + } + + return 0; +} + #ifdef CONFIG_PM_SLEEP static int img_i2c_suspend(struct device *dev) { struct img_i2c *i2c = dev_get_drvdata(dev); + int ret; - img_i2c_switch_mode(i2c, MODE_SUSPEND); + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; - clk_disable_unprepare(i2c->sys_clk); + img_i2c_switch_mode(i2c, MODE_SUSPEND); return 0; } @@ -1430,7 +1483,7 @@ static int img_i2c_resume(struct device *dev) struct img_i2c *i2c = dev_get_drvdata(dev); int ret; - ret = clk_prepare_enable(i2c->sys_clk); + ret = pm_runtime_force_resume(dev); if (ret) return ret; @@ -1440,7 +1493,12 @@ static int img_i2c_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(img_i2c_pm, img_i2c_suspend, img_i2c_resume); +static const struct dev_pm_ops img_i2c_pm = { + SET_RUNTIME_PM_OPS(img_i2c_runtime_suspend, + img_i2c_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(img_i2c_suspend, img_i2c_resume) +}; static const struct of_device_id img_scb_i2c_match[] = { { .compatible = "img,scb-i2c" }, diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 54a47b40546f..f96830ffd9f1 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1021,7 +1021,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, } dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", - rinfo->sda_gpio, rinfo->scl_gpio); + rinfo->scl_gpio, rinfo->sda_gpio); rinfo->prepare_recovery = i2c_imx_prepare_recovery; rinfo->unprepare_recovery = i2c_imx_unprepare_recovery; @@ -1100,7 +1100,7 @@ static int i2c_imx_probe(struct platform_device *pdev) } /* Request IRQ */ - ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0, + ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED, pdev->name, i2c_imx); if (ret) { dev_err(&pdev->dev, "can't claim irq %d\n", irq); diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 22ffcb73c185..b51adffa4841 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -340,12 +340,15 @@ static int ismt_process_desc(const struct ismt_desc *desc, data->word = dma_buffer[0] | (dma_buffer[1] << 8); break; case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_I2C_BLOCK_DATA: if (desc->rxbytes != dma_buffer[0] + 1) return -EMSGSIZE; memcpy(data->block, dma_buffer, desc->rxbytes); break; + case I2C_SMBUS_I2C_BLOCK_DATA: + memcpy(&data->block[1], dma_buffer, desc->rxbytes); + data->block[0] = desc->rxbytes; + break; } return 0; } diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 96caf378b1dc..950a9d74f54d 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -322,7 +322,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { static u32 mpc_i2c_get_sec_cfg_8xxx(void) { - struct device_node *node = NULL; + struct device_node *node; u32 __iomem *reg; u32 val = 0; @@ -700,7 +700,7 @@ static int fsl_i2c_probe(struct platform_device *op) } } - if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) { + if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { clock = MPC_I2C_CLOCK_PRESERVE; } else { prop = of_get_property(op->dev.of_node, "clock-frequency", diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h index aa3c8f4771c1..a7ef19855bb8 100644 --- a/drivers/i2c/busses/i2c-octeon-core.h +++ b/drivers/i2c/busses/i2c-octeon-core.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #include <linux/atomic.h> #include <linux/clk.h> #include <linux/delay.h> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 1ebb5e947e0b..b9172f08fd05 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -360,6 +360,7 @@ static int omap_i2c_init(struct omap_i2c_dev *omap) unsigned long fclk_rate = 12000000; unsigned long internal_clk = 0; struct clk *fclk; + int error; if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) { /* @@ -378,6 +379,13 @@ static int omap_i2c_init(struct omap_i2c_dev *omap) * do this bit unconditionally. */ fclk = clk_get(omap->dev, "fck"); + if (IS_ERR(fclk)) { + error = PTR_ERR(fclk); + dev_err(omap->dev, "could not get fck: %i\n", error); + + return error; + } + fclk_rate = clk_get_rate(fclk); clk_put(fclk); @@ -410,6 +418,12 @@ static int omap_i2c_init(struct omap_i2c_dev *omap) else internal_clk = 4000; fclk = clk_get(omap->dev, "fck"); + if (IS_ERR(fclk)) { + error = PTR_ERR(fclk); + dev_err(omap->dev, "could not get fck: %i\n", error); + + return error; + } fclk_rate = clk_get_rate(fclk) / 1000; clk_put(fclk); @@ -473,6 +487,22 @@ static int omap_i2c_init(struct omap_i2c_dev *omap) } /* + * Try bus recovery, but only if SDA is actually low. + */ +static int omap_i2c_recover_bus(struct omap_i2c_dev *omap) +{ + u16 systest; + + systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG); + if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) && + (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) + return 0; /* bus seems to already be fine */ + if (!(systest & OMAP_I2C_SYSTEST_SCL_I_FUNC)) + return -EBUSY; /* recovery would not fix SCL */ + return i2c_recover_bus(&omap->adapter); +} + +/* * Waiting on Bus Busy */ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap) @@ -482,7 +512,7 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap) timeout = jiffies + OMAP_I2C_TIMEOUT; while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) { if (time_after(jiffies, timeout)) - return i2c_recover_bus(&omap->adapter); + return omap_i2c_recover_bus(omap); msleep(1); } @@ -563,8 +593,13 @@ static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap) } if (time_after(jiffies, timeout)) { + /* + * SDA or SCL were low for the entire timeout without + * any activity detected. Most likely, a slave is + * locking up the bus with no master driving the clock. + */ dev_warn(omap->dev, "timeout waiting for bus ready\n"); - return -ETIMEDOUT; + return omap_i2c_recover_bus(omap); } msleep(1); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index faa8fb8f2b8f..fa41ff799533 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -123,7 +123,6 @@ static struct i2c_adapter parport_adapter = { /* SMBus alert support */ static struct i2c_smbus_alert_setup alert_data = { - .alert_edge_triggered = 1, }; static struct i2c_client *ara; static struct lineop parport_ctrl_irq = { diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a8e54df4aed6..319209a07353 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -237,7 +237,6 @@ static void i2c_parport_attach(struct parport *port) /* Setup SMBus alert if supported */ if (adapter_parm[type].smbus_alert) { - adapter->alert_data.alert_edge_triggered = 1; adapter->ara = i2c_setup_smbus_alert(&adapter->adapter, &adapter->alert_data); if (adapter->ara) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 0ecdb47a23ab..462948e2c535 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -85,6 +85,9 @@ /* SB800 constants */ #define SB800_PIIX4_SMB_IDX 0xcd6 +#define KERNCZ_IMC_IDX 0x3e +#define KERNCZ_IMC_DATA 0x3f + /* * SB800 port is selected by bits 2:1 of the smb_en register (0x2c) * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f. @@ -94,6 +97,12 @@ #define SB800_PIIX4_PORT_IDX_ALT 0x2e #define SB800_PIIX4_PORT_IDX_SEL 0x2f #define SB800_PIIX4_PORT_IDX_MASK 0x06 +#define SB800_PIIX4_PORT_IDX_SHIFT 1 + +/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ +#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 +#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 +#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 /* insmod parameters */ @@ -149,6 +158,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { */ static DEFINE_MUTEX(piix4_mutex_sb800); static u8 piix4_port_sel_sb800; +static u8 piix4_port_mask_sb800; +static u8 piix4_port_shift_sb800; static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { " port 0", " port 2", " port 3", " port 4" }; @@ -159,6 +170,7 @@ struct i2c_piix4_adapdata { /* SB800 */ bool sb800_main; + bool notify_imc; u8 port; /* Port number, shifted */ }; @@ -347,7 +359,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) { - piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; + switch (PIIX4_dev->device) { + case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS: + piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; + break; + case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS: + default: + piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; + break; + } } else { mutex_lock(&piix4_mutex_sb800); outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX); @@ -355,6 +379,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, piix4_port_sel_sb800 = (port_sel & 0x01) ? SB800_PIIX4_PORT_IDX_ALT : SB800_PIIX4_PORT_IDX; + piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; + piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; mutex_unlock(&piix4_mutex_sb800); } @@ -572,6 +598,67 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, return 0; } +static uint8_t piix4_imc_read(uint8_t idx) +{ + outb_p(idx, KERNCZ_IMC_IDX); + return inb_p(KERNCZ_IMC_DATA); +} + +static void piix4_imc_write(uint8_t idx, uint8_t value) +{ + outb_p(idx, KERNCZ_IMC_IDX); + outb_p(value, KERNCZ_IMC_DATA); +} + +static int piix4_imc_sleep(void) +{ + int timeout = MAX_TIMEOUT; + + if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc")) + return -EBUSY; + + /* clear response register */ + piix4_imc_write(0x82, 0x00); + /* request ownership flag */ + piix4_imc_write(0x83, 0xB4); + /* kick off IMC Mailbox command 96 */ + piix4_imc_write(0x80, 0x96); + + while (timeout--) { + if (piix4_imc_read(0x82) == 0xfa) { + release_region(KERNCZ_IMC_IDX, 2); + return 0; + } + usleep_range(1000, 2000); + } + + release_region(KERNCZ_IMC_IDX, 2); + return -ETIMEDOUT; +} + +static void piix4_imc_wakeup(void) +{ + int timeout = MAX_TIMEOUT; + + if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc")) + return; + + /* clear response register */ + piix4_imc_write(0x82, 0x00); + /* release ownership flag */ + piix4_imc_write(0x83, 0xB5); + /* kick off IMC Mailbox command 96 */ + piix4_imc_write(0x80, 0x96); + + while (timeout--) { + if (piix4_imc_read(0x82) == 0xfa) + break; + usleep_range(1000, 2000); + } + + release_region(KERNCZ_IMC_IDX, 2); +} + /* * Handles access to multiple SMBus ports on the SB800. * The port is selected by bits 2:1 of the smb_en register (0x2c). @@ -612,12 +699,47 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, return -EBUSY; } + /* + * Notify the IMC (Integrated Micro Controller) if required. + * Among other responsibilities, the IMC is in charge of monitoring + * the System fans and temperature sensors, and act accordingly. + * All this is done through SMBus and can/will collide + * with our transactions if they are long (BLOCK_DATA). + * Therefore we need to request the ownership flag during those + * transactions. + */ + if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) { + int ret; + + ret = piix4_imc_sleep(); + switch (ret) { + case -EBUSY: + dev_warn(&adap->dev, + "IMC base address index region 0x%x already in use.\n", + KERNCZ_IMC_IDX); + break; + case -ETIMEDOUT: + dev_warn(&adap->dev, + "Failed to communicate with the IMC.\n"); + break; + default: + break; + } + + /* If IMC communication fails do not retry */ + if (ret) { + dev_warn(&adap->dev, + "Continuing without IMC notification.\n"); + adapdata->notify_imc = false; + } + } + outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); port = adapdata->port; - if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port) - outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port, + if ((smba_en_lo & piix4_port_mask_sb800) != port) + outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port, SB800_PIIX4_SMB_IDX + 1); retval = piix4_access(adap, addr, flags, read_write, @@ -628,6 +750,9 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, /* Release the semaphore */ outb_p(smbslvcnt | 0x20, SMBSLVCNT); + if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) + piix4_imc_wakeup(); + mutex_unlock(&piix4_mutex_sb800); return retval; @@ -679,7 +804,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, - bool sb800_main, u8 port, + bool sb800_main, u8 port, bool notify_imc, const char *name, struct i2c_adapter **padap) { struct i2c_adapter *adap; @@ -706,7 +831,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adapdata->smba = smba; adapdata->sb800_main = sb800_main; - adapdata->port = port << 1; + adapdata->port = port << piix4_port_shift_sb800; + adapdata->notify_imc = notify_imc; /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; @@ -728,14 +854,15 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, return 0; } -static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba) +static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba, + bool notify_imc) { struct i2c_piix4_adapdata *adapdata; int port; int retval; for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) { - retval = piix4_add_adapter(dev, smba, true, port, + retval = piix4_add_adapter(dev, smba, true, port, notify_imc, piix4_main_port_names_sb800[port], &piix4_main_adapters[port]); if (retval < 0) @@ -769,6 +896,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && dev->revision >= 0x40) || dev->vendor == PCI_VENDOR_ID_AMD) { + bool notify_imc = false; is_sb800 = true; if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) { @@ -778,6 +906,20 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return -EBUSY; } + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) { + u8 imc; + + /* + * Detect if IMC is active or not, this method is + * described on coreboot's AMD IMC notes + */ + pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3), + 0x40, &imc); + if (imc & 0x80) + notify_imc = true; + } + /* base address location etc changed in SB800 */ retval = piix4_setup_sb800(dev, id, 0); if (retval < 0) { @@ -789,7 +931,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) * Try to register multiplexed main SMBus adapter, * give up if we can't */ - retval = piix4_add_adapters_sb800(dev, retval); + retval = piix4_add_adapters_sb800(dev, retval, notify_imc); if (retval < 0) { release_region(SB800_PIIX4_SMB_IDX, 2); return retval; @@ -800,7 +942,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Try to register main SMBus adapter, give up if we can't */ - retval = piix4_add_adapter(dev, retval, false, 0, "", + retval = piix4_add_adapter(dev, retval, false, 0, false, "", &piix4_main_adapters[0]); if (retval < 0) return retval; @@ -827,7 +969,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval > 0) { /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, false, 0, + piix4_add_adapter(dev, retval, false, 0, false, is_sb800 ? piix4_aux_port_name_sb800 : "", &piix4_aux_adapter); } @@ -841,7 +983,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap) if (adapdata->smba) { i2c_del_adapter(adap); - if (adapdata->port == (0 << 1)) { + if (adapdata->port == (0 << piix4_port_shift_sb800)) { release_region(adapdata->smba, SMBIOSIZE); if (adapdata->sb800_main) release_region(SB800_PIIX4_SMB_IDX, 2); diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 42d6b3a226f8..a542041df0cd 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -112,7 +112,6 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) jiffies, expires); timer->expires = jiffies + expires; - timer->data = (unsigned long)alg_data; add_timer(timer); } @@ -435,9 +434,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static void i2c_pnx_timeout(unsigned long data) +static void i2c_pnx_timeout(struct timer_list *t) { - struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data; + struct i2c_pnx_algo_data *alg_data = from_timer(alg_data, t, mif.timer); u32 ctl; dev_err(&alg_data->adapter.dev, @@ -659,8 +658,7 @@ static int i2c_pnx_probe(struct platform_device *pdev) if (IS_ERR(alg_data->clk)) return PTR_ERR(alg_data->clk); - setup_timer(&alg_data->mif.timer, i2c_pnx_timeout, - (unsigned long)alg_data); + timer_setup(&alg_data->mif.timer, i2c_pnx_timeout, 0); snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name), "%s", pdev->name); diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index c811af4c8d81..95c2f1ce3cad 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -84,12 +84,7 @@ #define ICSR2_NACKF 0x10 -/* ICBRx (@ PCLK 33MHz) */ #define ICBR_RESERVED 0xe0 /* Should be 1 on writes */ -#define ICBRL_SP100K (19 | ICBR_RESERVED) -#define ICBRH_SP100K (16 | ICBR_RESERVED) -#define ICBRL_SP400K (21 | ICBR_RESERVED) -#define ICBRH_SP400K (9 | ICBR_RESERVED) #define RIIC_INIT_MSG -1 @@ -288,48 +283,99 @@ static const struct i2c_algorithm riic_algo = { .functionality = riic_func, }; -static int riic_init_hw(struct riic_dev *riic, u32 spd) +static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) { int ret; unsigned long rate; + int total_ticks, cks, brl, brh; ret = clk_prepare_enable(riic->clk); if (ret) return ret; + if (t->bus_freq_hz > 400000) { + dev_err(&riic->adapter.dev, + "unsupported bus speed (%dHz). 400000 max\n", + t->bus_freq_hz); + clk_disable_unprepare(riic->clk); + return -EINVAL; + } + + rate = clk_get_rate(riic->clk); + /* - * TODO: Implement formula to calculate the timing values depending on - * variable parent clock rate and arbitrary bus speed + * Assume the default register settings: + * FER.SCLE = 1 (SCL sync circuit enabled, adds 2 or 3 cycles) + * FER.NFE = 1 (noise circuit enabled) + * MR3.NF = 0 (1 cycle of noise filtered out) + * + * Freq (CKS=000) = (I2CCLK + tr + tf)/ (BRH + 3 + 1) + (BRL + 3 + 1) + * Freq (CKS!=000) = (I2CCLK + tr + tf)/ (BRH + 2 + 1) + (BRL + 2 + 1) */ - rate = clk_get_rate(riic->clk); - if (rate != 33325000) { - dev_err(&riic->adapter.dev, - "invalid parent clk (%lu). Must be 33325000Hz\n", rate); + + /* + * Determine reference clock rate. We must be able to get the desired + * frequency with only 62 clock ticks max (31 high, 31 low). + * Aim for a duty of 60% LOW, 40% HIGH. + */ + total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz); + + for (cks = 0; cks < 7; cks++) { + /* + * 60% low time must be less than BRL + 2 + 1 + * BRL max register value is 0x1F. + */ + brl = ((total_ticks * 6) / 10); + if (brl <= (0x1F + 3)) + break; + + total_ticks /= 2; + rate /= 2; + } + + if (brl > (0x1F + 3)) { + dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n", + (unsigned long)t->bus_freq_hz); clk_disable_unprepare(riic->clk); return -EINVAL; } + brh = total_ticks - brl; + + /* Remove automatic clock ticks for sync circuit and NF */ + if (cks == 0) { + brl -= 4; + brh -= 4; + } else { + brl -= 3; + brh -= 3; + } + + /* + * Remove clock ticks for rise and fall times. Convert ns to clock + * ticks. + */ + brl -= t->scl_fall_ns / (1000000000 / rate); + brh -= t->scl_rise_ns / (1000000000 / rate); + + /* Adjust for min register values for when SCLE=1 and NFE=1 */ + if (brl < 1) + brl = 1; + if (brh < 1) + brh = 1; + + pr_debug("i2c-riic: freq=%lu, duty=%d, fall=%lu, rise=%lu, cks=%d, brl=%d, brh=%d\n", + rate / total_ticks, ((brl + 3) * 100) / (brl + brh + 6), + t->scl_fall_ns / (1000000000 / rate), + t->scl_rise_ns / (1000000000 / rate), cks, brl, brh); + /* Changing the order of accessing IICRST and ICE may break things! */ writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1); riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1); - switch (spd) { - case 100000: - writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1); - writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH); - writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL); - break; - case 400000: - writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1); - writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH); - writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL); - break; - default: - dev_err(&riic->adapter.dev, - "unsupported bus speed (%dHz). Use 100000 or 400000\n", spd); - clk_disable_unprepare(riic->clk); - return -EINVAL; - } + writeb(ICMR1_CKS(cks), riic->base + RIIC_ICMR1); + writeb(brh | ICBR_RESERVED, riic->base + RIIC_ICBRH); + writeb(brl | ICBR_RESERVED, riic->base + RIIC_ICBRL); writeb(0, riic->base + RIIC_ICSER); writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3); @@ -351,11 +397,10 @@ static struct riic_irq_desc riic_irqs[] = { static int riic_i2c_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct riic_dev *riic; struct i2c_adapter *adap; struct resource *res; - u32 bus_rate = 0; + struct i2c_timings i2c_t; int i, ret; riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL); @@ -396,8 +441,9 @@ static int riic_i2c_probe(struct platform_device *pdev) init_completion(&riic->msg_done); - of_property_read_u32(np, "clock-frequency", &bus_rate); - ret = riic_init_hw(riic, bus_rate); + i2c_parse_fw_timings(&pdev->dev, &i2c_t, true); + + ret = riic_init_hw(riic, &i2c_t); if (ret) return ret; @@ -408,7 +454,8 @@ static int riic_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, riic); - dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate); + dev_info(&pdev->dev, "registered with %dHz bus speed\n", + i2c_t.bus_freq_hz); return 0; } diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 6f2aaeb7c4fa..c03acdf71397 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -881,7 +881,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; - const struct of_device_id *match; + const struct sh_mobile_dt_config *config; int ret; u32 bus_speed; @@ -913,10 +913,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) pd->bus_speed = ret ? STANDARD_MODE : bus_speed; pd->clks_per_count = 1; - match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev); - if (match) { - const struct sh_mobile_dt_config *config = match->data; - + config = of_device_get_match_data(&dev->dev); + if (config) { pd->clks_per_count = config->clks_per_count; if (config->setup) diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h index dab51761f8c5..d4f9cef251ac 100644 --- a/drivers/i2c/busses/i2c-stm32.h +++ b/drivers/i2c/busses/i2c-stm32.h @@ -1,10 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* * i2c-stm32.h * * Copyright (C) M'boumba Cedric Madianga 2017 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> * - * License terms: GNU General Public License (GPL), version 2 */ #ifndef _I2C_STM32_H diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index 4ec108496f15..47c8d00de53f 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for STMicroelectronics STM32 I2C controller * @@ -6,11 +7,11 @@ * http://www.st.com/resource/en/reference_manual/DM00031020.pdf * * Copyright (C) M'boumba Cedric Madianga 2016 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> * * This driver is based on i2c-st.c * - * License terms: GNU General Public License (GPL), version 2 */ #include <linux/clk.h> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index d4a6e9c2e9aa..b445b3bb0bb1 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for STMicroelectronics STM32F7 I2C controller * @@ -7,11 +8,11 @@ * http://www.st.com/resource/en/reference_manual/dm00124865.pdf * * Copyright (C) M'boumba Cedric Madianga 2017 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> * * This driver is based on i2c-stm32f4.c * - * License terms: GNU General Public License (GPL), version 2 */ #include <linux/clk.h> #include <linux/delay.h> diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index addd90a8cb59..7c7fc01116a1 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -282,8 +282,7 @@ static void taos_disconnect(struct serio *serio) { struct taos_data *taos = serio_get_drvdata(serio); - if (taos->client) - i2c_unregister_device(taos->client); + i2c_unregister_device(taos->client); i2c_del_adapter(&taos->adapter); serio_close(serio); kfree(taos); diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index df0976f4432a..19f8eec38717 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -118,8 +118,6 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk) static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, struct device_node *node) { - u32 type; - if (!node) return -EINVAL; @@ -127,10 +125,6 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, if (!i2c->alert_data.irq) return -EINVAL; - type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq)); - i2c->alert_data.alert_edge_triggered = - (type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0; - i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data); if (!i2c->ara) return -ENODEV; @@ -149,8 +143,7 @@ static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c, static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c) { - if (i2c->ara) - i2c_unregister_device(i2c->ara); + i2c_unregister_device(i2c->ara); } static int thunder_i2c_probe_pci(struct pci_dev *pdev, diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index 7e89ba6fcf6f..a7ac746018ad 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -129,6 +129,11 @@ struct slimpro_i2c_dev { #define to_slimpro_i2c_dev(cl) \ container_of(cl, struct slimpro_i2c_dev, mbox_client) +enum slimpro_i2c_version { + XGENE_SLIMPRO_I2C_V1 = 0, + XGENE_SLIMPRO_I2C_V2 = 1, +}; + /* * This function tests and clears a bitmask then returns its old value */ @@ -476,6 +481,15 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev) } } else { struct acpi_pcct_hw_reduced *cppc_ss; + const struct acpi_device_id *acpi_id; + int version = XGENE_SLIMPRO_I2C_V1; + + acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, + &pdev->dev); + if (!acpi_id) + return -EINVAL; + + version = (int)acpi_id->driver_data; if (device_property_read_u32(&pdev->dev, "pcc-channel", &ctx->mbox_idx)) @@ -514,9 +528,16 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev) */ ctx->comm_base_addr = cppc_ss->base_address; if (ctx->comm_base_addr) { - ctx->pcc_comm_addr = memremap(ctx->comm_base_addr, - cppc_ss->length, - MEMREMAP_WB); + if (version == XGENE_SLIMPRO_I2C_V2) + ctx->pcc_comm_addr = memremap( + ctx->comm_base_addr, + cppc_ss->length, + MEMREMAP_WT); + else + ctx->pcc_comm_addr = memremap( + ctx->comm_base_addr, + cppc_ss->length, + MEMREMAP_WB); } else { dev_err(&pdev->dev, "Failed to get PCC comm region\n"); rc = -ENOENT; @@ -581,7 +602,8 @@ MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); #ifdef CONFIG_ACPI static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = { - {"APMC0D40", 0}, + {"APMC0D40", XGENE_SLIMPRO_I2C_V1}, + {"APMC0D8B", XGENE_SLIMPRO_I2C_V2}, {} }; MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids); diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c index 6b106e94bc09..b970bf8f38e5 100644 --- a/drivers/i2c/busses/i2c-xlp9xx.c +++ b/drivers/i2c/busses/i2c-xlp9xx.c @@ -7,6 +7,7 @@ */ #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/completion.h> #include <linux/i2c.h> #include <linux/init.h> @@ -81,9 +82,12 @@ struct xlp9xx_i2c_dev { struct completion msg_complete; int irq; bool msg_read; + bool len_recv; + bool client_pec; u32 __iomem *base; u32 msg_buf_remaining; u32 msg_len; + u32 ip_clk_hz; u32 clk_hz; u32 msg_err; u8 *msg_buf; @@ -141,10 +145,25 @@ static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv) static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv) { u32 len, i; - u8 *buf = priv->msg_buf; + u8 rlen, *buf = priv->msg_buf; len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) & XLP9XX_I2C_FIFO_WCNT_MASK; + if (!len) + return; + if (priv->len_recv) { + /* read length byte */ + rlen = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO); + *buf++ = rlen; + len--; + if (priv->client_pec) + ++rlen; + /* update remaining bytes and message length */ + priv->msg_buf_remaining = rlen; + priv->msg_len = rlen + 1; + priv->len_recv = false; + } + len = min(priv->msg_buf_remaining, len); for (i = 0; i < len; i++, buf++) *buf = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO); @@ -213,7 +232,7 @@ static int xlp9xx_i2c_init(struct xlp9xx_i2c_dev *priv) * The controller uses 5 * SCL clock internally. * So prescale value should be divided by 5. */ - prescale = DIV_ROUND_UP(XLP9XX_I2C_IP_CLK_FREQ, priv->clk_hz); + prescale = DIV_ROUND_UP(priv->ip_clk_hz, priv->clk_hz); prescale = ((prescale - 8) / 5) - 1; xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_RST); xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_EN | @@ -228,7 +247,7 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg, int last_msg) { unsigned long timeleft; - u32 intr_mask, cmd, val; + u32 intr_mask, cmd, val, len; priv->msg_buf = msg->buf; priv->msg_buf_remaining = priv->msg_len = msg->len; @@ -261,9 +280,13 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg, else val &= ~XLP9XX_I2C_CTRL_ADDMODE; + priv->len_recv = msg->flags & I2C_M_RECV_LEN; + len = priv->len_recv ? XLP9XX_I2C_FIFO_SIZE : msg->len; + priv->client_pec = msg->flags & I2C_CLIENT_PEC; + /* set data length to be transferred */ val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) | - (msg->len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT); + (len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT); xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val); /* fill fifo during tx */ @@ -310,6 +333,9 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg, return -ETIMEDOUT; } + /* update msg->len with actual received length */ + if (msg->flags & I2C_M_RECV_LEN) + msg->len = priv->msg_len; return 0; } @@ -342,9 +368,19 @@ static const struct i2c_algorithm xlp9xx_i2c_algo = { static int xlp9xx_i2c_get_frequency(struct platform_device *pdev, struct xlp9xx_i2c_dev *priv) { + struct clk *clk; u32 freq; int err; + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + priv->ip_clk_hz = XLP9XX_I2C_IP_CLK_FREQ; + dev_dbg(&pdev->dev, "using default input frequency %u\n", + priv->ip_clk_hz); + } else { + priv->ip_clk_hz = clk_get_rate(clk); + } + err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq); if (err) { freq = XLP9XX_I2C_DEFAULT_FREQ; diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 31186ead5a40..509a6007cdf6 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -86,6 +86,7 @@ int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsig property_entries_dup(info->properties); if (IS_ERR(devinfo->board_info.properties)) { status = PTR_ERR(devinfo->board_info.properties); + kfree(devinfo); break; } } @@ -98,6 +99,7 @@ int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsig GFP_KERNEL); if (!devinfo->board_info.resources) { status = -ENOMEM; + kfree(devinfo); break; } } diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 56e46581b84b..706164b4c5be 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -29,6 +29,7 @@ #include <linux/errno.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/i2c-smbus.h> #include <linux/idr.h> #include <linux/init.h> #include <linux/irqflags.h> @@ -205,9 +206,6 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) */ while (i++ < RECOVERY_CLK_CNT * 2) { if (val) { - /* Break if SDA is high */ - if (bri->get_sda && bri->get_sda(adap)) - break; /* SCL shouldn't be low here */ if (!bri->get_scl(adap)) { dev_err(&adap->dev, @@ -215,6 +213,9 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) ret = -EBUSY; break; } + /* Break if SDA is high */ + if (bri->get_sda && bri->get_sda(adap)) + break; } val = !val; @@ -222,6 +223,10 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) ndelay(RECOVERY_NDELAY); } + /* check if recovery actually succeeded */ + if (bri->get_sda && !bri->get_sda(adap)) + ret = -EBUSY; + if (bri->unprepare_recovery) bri->unprepare_recovery(adap); @@ -666,10 +671,16 @@ static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter, } static void i2c_dev_set_name(struct i2c_adapter *adap, - struct i2c_client *client) + struct i2c_client *client, + struct i2c_board_info const *info) { struct acpi_device *adev = ACPI_COMPANION(&client->dev); + if (info && info->dev_name) { + dev_set_name(&client->dev, "i2c-%s", info->dev_name); + return; + } + if (adev) { dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev)); return; @@ -766,7 +777,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.of_node = info->of_node; client->dev.fwnode = info->fwnode; - i2c_dev_set_name(adap, client); + i2c_dev_set_name(adap, client, info); if (info->properties) { status = device_add_properties(&client->dev, info->properties); @@ -808,6 +819,8 @@ EXPORT_SYMBOL_GPL(i2c_new_device); */ void i2c_unregister_device(struct i2c_client *client) { + if (!client) + return; if (client->dev.of_node) of_node_clear_flag(client->dev.of_node, OF_POPULATED); if (ACPI_COMPANION(&client->dev)) @@ -1259,6 +1272,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap) goto out_list; } + res = of_i2c_setup_smbus_alert(adap); + if (res) + goto out_reg; + dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); pm_runtime_no_callbacks(&adap->dev); @@ -1290,6 +1307,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap) return 0; +out_reg: + init_completion(&adap->dev_released); + device_unregister(&adap->dev); + wait_for_completion(&adap->dev_released); out_list: mutex_lock(&core_lock); idr_remove(&i2c_adapter_idr, adap->nr); @@ -1417,8 +1438,7 @@ static int __unregister_client(struct device *dev, void *dummy) static int __unregister_dummy(struct device *dev, void *dummy) { struct i2c_client *client = i2c_verify_client(dev); - if (client) - i2c_unregister_device(client); + i2c_unregister_device(client); return 0; } diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 10f00a82ec9d..4bb9927afd01 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -17,6 +17,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/i2c.h> +#include <linux/i2c-smbus.h> #define CREATE_TRACE_POINTS #include <trace/events/smbus.h> @@ -592,3 +593,57 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, return i; } EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); + +/** + * i2c_setup_smbus_alert - Setup SMBus alert support + * @adapter: the target adapter + * @setup: setup data for the SMBus alert handler + * Context: can sleep + * + * Setup handling of the SMBus alert protocol on a given I2C bus segment. + * + * Handling can be done either through our IRQ handler, or by the + * adapter (from its handler, periodic polling, or whatever). + * + * NOTE that if we manage the IRQ, we *MUST* know if it's level or + * edge triggered in order to hand it to the workqueue correctly. + * If triggering the alert seems to wedge the system, you probably + * should have said it's level triggered. + * + * This returns the ara client, which should be saved for later use with + * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL + * to indicate an error. + */ +struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter, + struct i2c_smbus_alert_setup *setup) +{ + struct i2c_board_info ara_board_info = { + I2C_BOARD_INFO("smbus_alert", 0x0c), + .platform_data = setup, + }; + + return i2c_new_device(adapter, &ara_board_info); +} +EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert); + +#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF) +int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter) +{ + struct i2c_client *client; + int irq; + + irq = of_property_match_string(adapter->dev.of_node, "interrupt-names", + "smbus_alert"); + if (irq == -EINVAL || irq == -ENODATA) + return 0; + else if (irq < 0) + return irq; + + client = i2c_setup_smbus_alert(adapter, NULL); + if (!client) + return -ENODEV; + + return 0; +} +EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert); +#endif diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 6f638bbc922d..2cab27a68479 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -35,6 +35,7 @@ #include <linux/notifier.h> #include <linux/slab.h> #include <linux/uaccess.h> +#include <linux/compat.h> /* * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a @@ -238,46 +239,29 @@ static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr) } static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client, - unsigned long arg) + unsigned nmsgs, struct i2c_msg *msgs) { - struct i2c_rdwr_ioctl_data rdwr_arg; - struct i2c_msg *rdwr_pa; u8 __user **data_ptrs; int i, res; - if (copy_from_user(&rdwr_arg, - (struct i2c_rdwr_ioctl_data __user *)arg, - sizeof(rdwr_arg))) - return -EFAULT; - - /* Put an arbitrary limit on the number of messages that can - * be sent at once */ - if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS) - return -EINVAL; - - rdwr_pa = memdup_user(rdwr_arg.msgs, - rdwr_arg.nmsgs * sizeof(struct i2c_msg)); - if (IS_ERR(rdwr_pa)) - return PTR_ERR(rdwr_pa); - - data_ptrs = kmalloc(rdwr_arg.nmsgs * sizeof(u8 __user *), GFP_KERNEL); + data_ptrs = kmalloc(nmsgs * sizeof(u8 __user *), GFP_KERNEL); if (data_ptrs == NULL) { - kfree(rdwr_pa); + kfree(msgs); return -ENOMEM; } res = 0; - for (i = 0; i < rdwr_arg.nmsgs; i++) { + for (i = 0; i < nmsgs; i++) { /* Limit the size of the message to a sane amount */ - if (rdwr_pa[i].len > 8192) { + if (msgs[i].len > 8192) { res = -EINVAL; break; } - data_ptrs[i] = (u8 __user *)rdwr_pa[i].buf; - rdwr_pa[i].buf = memdup_user(data_ptrs[i], rdwr_pa[i].len); - if (IS_ERR(rdwr_pa[i].buf)) { - res = PTR_ERR(rdwr_pa[i].buf); + data_ptrs[i] = (u8 __user *)msgs[i].buf; + msgs[i].buf = memdup_user(data_ptrs[i], msgs[i].len); + if (IS_ERR(msgs[i].buf)) { + res = PTR_ERR(msgs[i].buf); break; } @@ -292,121 +276,117 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client, * greater (for example to account for a checksum byte at * the end of the message.) */ - if (rdwr_pa[i].flags & I2C_M_RECV_LEN) { - if (!(rdwr_pa[i].flags & I2C_M_RD) || - rdwr_pa[i].buf[0] < 1 || - rdwr_pa[i].len < rdwr_pa[i].buf[0] + + if (msgs[i].flags & I2C_M_RECV_LEN) { + if (!(msgs[i].flags & I2C_M_RD) || + msgs[i].buf[0] < 1 || + msgs[i].len < msgs[i].buf[0] + I2C_SMBUS_BLOCK_MAX) { res = -EINVAL; break; } - rdwr_pa[i].len = rdwr_pa[i].buf[0]; + msgs[i].len = msgs[i].buf[0]; } } if (res < 0) { int j; for (j = 0; j < i; ++j) - kfree(rdwr_pa[j].buf); + kfree(msgs[j].buf); kfree(data_ptrs); - kfree(rdwr_pa); + kfree(msgs); return res; } - res = i2c_transfer(client->adapter, rdwr_pa, rdwr_arg.nmsgs); + res = i2c_transfer(client->adapter, msgs, nmsgs); while (i-- > 0) { - if (res >= 0 && (rdwr_pa[i].flags & I2C_M_RD)) { - if (copy_to_user(data_ptrs[i], rdwr_pa[i].buf, - rdwr_pa[i].len)) + if (res >= 0 && (msgs[i].flags & I2C_M_RD)) { + if (copy_to_user(data_ptrs[i], msgs[i].buf, + msgs[i].len)) res = -EFAULT; } - kfree(rdwr_pa[i].buf); + kfree(msgs[i].buf); } kfree(data_ptrs); - kfree(rdwr_pa); + kfree(msgs); return res; } static noinline int i2cdev_ioctl_smbus(struct i2c_client *client, - unsigned long arg) + u8 read_write, u8 command, u32 size, + union i2c_smbus_data __user *data) { - struct i2c_smbus_ioctl_data data_arg; union i2c_smbus_data temp = {}; int datasize, res; - if (copy_from_user(&data_arg, - (struct i2c_smbus_ioctl_data __user *) arg, - sizeof(struct i2c_smbus_ioctl_data))) - return -EFAULT; - if ((data_arg.size != I2C_SMBUS_BYTE) && - (data_arg.size != I2C_SMBUS_QUICK) && - (data_arg.size != I2C_SMBUS_BYTE_DATA) && - (data_arg.size != I2C_SMBUS_WORD_DATA) && - (data_arg.size != I2C_SMBUS_PROC_CALL) && - (data_arg.size != I2C_SMBUS_BLOCK_DATA) && - (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) && - (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) && - (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) { + if ((size != I2C_SMBUS_BYTE) && + (size != I2C_SMBUS_QUICK) && + (size != I2C_SMBUS_BYTE_DATA) && + (size != I2C_SMBUS_WORD_DATA) && + (size != I2C_SMBUS_PROC_CALL) && + (size != I2C_SMBUS_BLOCK_DATA) && + (size != I2C_SMBUS_I2C_BLOCK_BROKEN) && + (size != I2C_SMBUS_I2C_BLOCK_DATA) && + (size != I2C_SMBUS_BLOCK_PROC_CALL)) { dev_dbg(&client->adapter->dev, "size out of range (%x) in ioctl I2C_SMBUS.\n", - data_arg.size); + size); return -EINVAL; } /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, so the check is valid if size==I2C_SMBUS_QUICK too. */ - if ((data_arg.read_write != I2C_SMBUS_READ) && - (data_arg.read_write != I2C_SMBUS_WRITE)) { + if ((read_write != I2C_SMBUS_READ) && + (read_write != I2C_SMBUS_WRITE)) { dev_dbg(&client->adapter->dev, "read_write out of range (%x) in ioctl I2C_SMBUS.\n", - data_arg.read_write); + read_write); return -EINVAL; } /* Note that command values are always valid! */ - if ((data_arg.size == I2C_SMBUS_QUICK) || - ((data_arg.size == I2C_SMBUS_BYTE) && - (data_arg.read_write == I2C_SMBUS_WRITE))) + if ((size == I2C_SMBUS_QUICK) || + ((size == I2C_SMBUS_BYTE) && + (read_write == I2C_SMBUS_WRITE))) /* These are special: we do not use data */ return i2c_smbus_xfer(client->adapter, client->addr, - client->flags, data_arg.read_write, - data_arg.command, data_arg.size, NULL); + client->flags, read_write, + command, size, NULL); - if (data_arg.data == NULL) { + if (data == NULL) { dev_dbg(&client->adapter->dev, "data is NULL pointer in ioctl I2C_SMBUS.\n"); return -EINVAL; } - if ((data_arg.size == I2C_SMBUS_BYTE_DATA) || - (data_arg.size == I2C_SMBUS_BYTE)) - datasize = sizeof(data_arg.data->byte); - else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || - (data_arg.size == I2C_SMBUS_PROC_CALL)) - datasize = sizeof(data_arg.data->word); + if ((size == I2C_SMBUS_BYTE_DATA) || + (size == I2C_SMBUS_BYTE)) + datasize = sizeof(data->byte); + else if ((size == I2C_SMBUS_WORD_DATA) || + (size == I2C_SMBUS_PROC_CALL)) + datasize = sizeof(data->word); else /* size == smbus block, i2c block, or block proc. call */ - datasize = sizeof(data_arg.data->block); + datasize = sizeof(data->block); - if ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || - (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) || - (data_arg.read_write == I2C_SMBUS_WRITE)) { - if (copy_from_user(&temp, data_arg.data, datasize)) + if ((size == I2C_SMBUS_PROC_CALL) || + (size == I2C_SMBUS_BLOCK_PROC_CALL) || + (size == I2C_SMBUS_I2C_BLOCK_DATA) || + (read_write == I2C_SMBUS_WRITE)) { + if (copy_from_user(&temp, data, datasize)) return -EFAULT; } - if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) { + if (size == I2C_SMBUS_I2C_BLOCK_BROKEN) { /* Convert old I2C block commands to the new convention. This preserves binary compatibility. */ - data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA; - if (data_arg.read_write == I2C_SMBUS_READ) + size = I2C_SMBUS_I2C_BLOCK_DATA; + if (read_write == I2C_SMBUS_READ) temp.block[0] = I2C_SMBUS_BLOCK_MAX; } res = i2c_smbus_xfer(client->adapter, client->addr, client->flags, - data_arg.read_write, data_arg.command, data_arg.size, &temp); - if (!res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || - (data_arg.read_write == I2C_SMBUS_READ))) { - if (copy_to_user(data_arg.data, &temp, datasize)) + read_write, command, size, &temp); + if (!res && ((size == I2C_SMBUS_PROC_CALL) || + (size == I2C_SMBUS_BLOCK_PROC_CALL) || + (read_write == I2C_SMBUS_READ))) { + if (copy_to_user(data, &temp, datasize)) return -EFAULT; } return res; @@ -454,12 +434,39 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) funcs = i2c_get_functionality(client->adapter); return put_user(funcs, (unsigned long __user *)arg); - case I2C_RDWR: - return i2cdev_ioctl_rdwr(client, arg); + case I2C_RDWR: { + struct i2c_rdwr_ioctl_data rdwr_arg; + struct i2c_msg *rdwr_pa; + + if (copy_from_user(&rdwr_arg, + (struct i2c_rdwr_ioctl_data __user *)arg, + sizeof(rdwr_arg))) + return -EFAULT; + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS) + return -EINVAL; - case I2C_SMBUS: - return i2cdev_ioctl_smbus(client, arg); + rdwr_pa = memdup_user(rdwr_arg.msgs, + rdwr_arg.nmsgs * sizeof(struct i2c_msg)); + if (IS_ERR(rdwr_pa)) + return PTR_ERR(rdwr_pa); + + return i2cdev_ioctl_rdwr(client, rdwr_arg.nmsgs, rdwr_pa); + } + case I2C_SMBUS: { + struct i2c_smbus_ioctl_data data_arg; + if (copy_from_user(&data_arg, + (struct i2c_smbus_ioctl_data __user *) arg, + sizeof(struct i2c_smbus_ioctl_data))) + return -EFAULT; + return i2cdev_ioctl_smbus(client, data_arg.read_write, + data_arg.command, + data_arg.size, + data_arg.data); + } case I2C_RETRIES: client->adapter->retries = arg; break; @@ -480,6 +487,90 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return 0; } +#ifdef CONFIG_COMPAT + +struct i2c_smbus_ioctl_data32 { + u8 read_write; + u8 command; + u32 size; + compat_caddr_t data; /* union i2c_smbus_data *data */ +}; + +struct i2c_msg32 { + u16 addr; + u16 flags; + u16 len; + compat_caddr_t buf; +}; + +struct i2c_rdwr_ioctl_data32 { + compat_caddr_t msgs; /* struct i2c_msg __user *msgs */ + u32 nmsgs; +}; + +static long compat_i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct i2c_client *client = file->private_data; + unsigned long funcs; + switch (cmd) { + case I2C_FUNCS: + funcs = i2c_get_functionality(client->adapter); + return put_user(funcs, (compat_ulong_t __user *)arg); + case I2C_RDWR: { + struct i2c_rdwr_ioctl_data32 rdwr_arg; + struct i2c_msg32 *p; + struct i2c_msg *rdwr_pa; + int i; + + if (copy_from_user(&rdwr_arg, + (struct i2c_rdwr_ioctl_data32 __user *)arg, + sizeof(rdwr_arg))) + return -EFAULT; + + if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS) + return -EINVAL; + + rdwr_pa = kmalloc_array(rdwr_arg.nmsgs, sizeof(struct i2c_msg), + GFP_KERNEL); + if (!rdwr_pa) + return -ENOMEM; + + p = compat_ptr(rdwr_arg.msgs); + for (i = 0; i < rdwr_arg.nmsgs; i++) { + struct i2c_msg32 umsg; + if (copy_from_user(&umsg, p + i, sizeof(umsg))) { + kfree(rdwr_pa); + return -EFAULT; + } + rdwr_pa[i] = (struct i2c_msg) { + .addr = umsg.addr, + .flags = umsg.flags, + .len = umsg.len, + .buf = compat_ptr(umsg.buf) + }; + } + + return i2cdev_ioctl_rdwr(client, rdwr_arg.nmsgs, rdwr_pa); + } + case I2C_SMBUS: { + struct i2c_smbus_ioctl_data32 data32; + if (copy_from_user(&data32, + (void __user *) arg, + sizeof(data32))) + return -EFAULT; + return i2cdev_ioctl_smbus(client, data32.read_write, + data32.command, + data32.size, + compat_ptr(data32.data)); + } + default: + return i2cdev_ioctl(file, cmd, arg); + } +} +#else +#define compat_i2cdev_ioctl NULL +#endif + static int i2cdev_open(struct inode *inode, struct file *file) { unsigned int minor = iminor(inode); @@ -527,6 +618,7 @@ static const struct file_operations i2cdev_fops = { .read = i2cdev_read, .write = i2cdev_write, .unlocked_ioctl = i2cdev_ioctl, + .compat_ioctl = compat_i2cdev_ioctl, .open = i2cdev_open, .release = i2cdev_release, }; diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index f9271c713d20..5a1dd7f13bac 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -21,12 +21,11 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_irq.h> #include <linux/slab.h> #include <linux/workqueue.h> struct i2c_smbus_alert { - unsigned int alert_edge_triggered:1; - int irq; struct work_struct alert; struct i2c_client *ara; /* Alert response address */ }; @@ -72,13 +71,12 @@ static int smbus_do_alert(struct device *dev, void *addrp) * The alert IRQ handler needs to hand work off to a task which can issue * SMBus calls, because those sleeping calls can't be made in IRQ context. */ -static void smbus_alert(struct work_struct *work) +static irqreturn_t smbus_alert(int irq, void *d) { - struct i2c_smbus_alert *alert; + struct i2c_smbus_alert *alert = d; struct i2c_client *ara; unsigned short prev_addr = 0; /* Not a valid address */ - alert = container_of(work, struct i2c_smbus_alert, alert); ara = alert->ara; for (;;) { @@ -115,21 +113,17 @@ static void smbus_alert(struct work_struct *work) prev_addr = data.addr; } - /* We handled all alerts; re-enable level-triggered IRQs */ - if (!alert->alert_edge_triggered) - enable_irq(alert->irq); + return IRQ_HANDLED; } -static irqreturn_t smbalert_irq(int irq, void *d) +static void smbalert_work(struct work_struct *work) { - struct i2c_smbus_alert *alert = d; + struct i2c_smbus_alert *alert; - /* Disable level-triggered IRQs until we handle them */ - if (!alert->alert_edge_triggered) - disable_irq_nosync(irq); + alert = container_of(work, struct i2c_smbus_alert, alert); + + smbus_alert(0, alert); - schedule_work(&alert->alert); - return IRQ_HANDLED; } /* Setup SMBALERT# infrastructure */ @@ -139,28 +133,35 @@ static int smbalert_probe(struct i2c_client *ara, struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev); struct i2c_smbus_alert *alert; struct i2c_adapter *adapter = ara->adapter; - int res; + int res, irq; alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert), GFP_KERNEL); if (!alert) return -ENOMEM; - alert->alert_edge_triggered = setup->alert_edge_triggered; - alert->irq = setup->irq; - INIT_WORK(&alert->alert, smbus_alert); + if (setup) { + irq = setup->irq; + } else { + irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert"); + if (irq <= 0) + return irq; + } + + INIT_WORK(&alert->alert, smbalert_work); alert->ara = ara; - if (setup->irq > 0) { - res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq, - 0, "smbus_alert", alert); + if (irq > 0) { + res = devm_request_threaded_irq(&ara->dev, irq, + NULL, smbus_alert, + IRQF_SHARED | IRQF_ONESHOT, + "smbus_alert", alert); if (res) return res; } i2c_set_clientdata(ara, alert); - dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n", - setup->alert_edge_triggered ? "edge" : "level"); + dev_info(&adapter->dev, "supports SMBALERT#\n"); return 0; } @@ -190,38 +191,6 @@ static struct i2c_driver smbalert_driver = { }; /** - * i2c_setup_smbus_alert - Setup SMBus alert support - * @adapter: the target adapter - * @setup: setup data for the SMBus alert handler - * Context: can sleep - * - * Setup handling of the SMBus alert protocol on a given I2C bus segment. - * - * Handling can be done either through our IRQ handler, or by the - * adapter (from its handler, periodic polling, or whatever). - * - * NOTE that if we manage the IRQ, we *MUST* know if it's level or - * edge triggered in order to hand it to the workqueue correctly. - * If triggering the alert seems to wedge the system, you probably - * should have said it's level triggered. - * - * This returns the ara client, which should be saved for later use with - * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL - * to indicate an error. - */ -struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter, - struct i2c_smbus_alert_setup *setup) -{ - struct i2c_board_info ara_board_info = { - I2C_BOARD_INFO("smbus_alert", 0x0c), - .platform_data = setup, - }; - - return i2c_new_device(adapter, &ara_board_info); -} -EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert); - -/** * i2c_handle_smbus_alert - Handle an SMBus alert * @ara: the ARA client on the relevant adapter * Context: can't sleep diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index 4a67d3199877..6d9d865e8518 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for multiplexer I2C chip drivers. diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 7b992db38021..2ca068d8b92d 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -246,36 +246,6 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id) return handled ? IRQ_HANDLED : IRQ_NONE; } -static void pca954x_irq_mask(struct irq_data *idata) -{ - struct pca954x *data = irq_data_get_irq_chip_data(idata); - unsigned int pos = idata->hwirq; - unsigned long flags; - - raw_spin_lock_irqsave(&data->lock, flags); - - data->irq_mask &= ~BIT(pos); - if (!data->irq_mask) - disable_irq(data->client->irq); - - raw_spin_unlock_irqrestore(&data->lock, flags); -} - -static void pca954x_irq_unmask(struct irq_data *idata) -{ - struct pca954x *data = irq_data_get_irq_chip_data(idata); - unsigned int pos = idata->hwirq; - unsigned long flags; - - raw_spin_lock_irqsave(&data->lock, flags); - - if (!data->irq_mask) - enable_irq(data->client->irq); - data->irq_mask |= BIT(pos); - - raw_spin_unlock_irqrestore(&data->lock, flags); -} - static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type) { if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW) @@ -285,8 +255,6 @@ static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type) static struct irq_chip pca954x_irq_chip = { .name = "i2c-mux-pca954x", - .irq_mask = pca954x_irq_mask, - .irq_unmask = pca954x_irq_unmask, .irq_set_type = pca954x_irq_set_type, }; @@ -294,7 +262,7 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc) { struct pca954x *data = i2c_mux_priv(muxc); struct i2c_client *client = data->client; - int c, err, irq; + int c, irq; if (!data->chip->has_irq || client->irq <= 0) return 0; @@ -309,29 +277,31 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc) for (c = 0; c < data->chip->nchans; c++) { irq = irq_create_mapping(data->irq, c); + if (!irq) { + dev_err(&client->dev, "failed irq create map\n"); + return -EINVAL; + } irq_set_chip_data(irq, data); irq_set_chip_and_handler(irq, &pca954x_irq_chip, handle_simple_irq); } - err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL, - pca954x_irq_handler, - IRQF_ONESHOT | IRQF_SHARED, - "pca954x", data); - if (err) - goto err_req_irq; + return 0; +} - disable_irq(data->client->irq); +static void pca954x_cleanup(struct i2c_mux_core *muxc) +{ + struct pca954x *data = i2c_mux_priv(muxc); + int c, irq; - return 0; -err_req_irq: - for (c = 0; c < data->chip->nchans; c++) { - irq = irq_find_mapping(data->irq, c); - irq_dispose_mapping(irq); + if (data->irq) { + for (c = 0; c < data->chip->nchans; c++) { + irq = irq_find_mapping(data->irq, c); + irq_dispose_mapping(irq); + } + irq_domain_remove(data->irq); } - irq_domain_remove(data->irq); - - return err; + i2c_mux_del_adapters(muxc); } /* @@ -391,7 +361,7 @@ static int pca954x_probe(struct i2c_client *client, ret = pca954x_irq_setup(muxc); if (ret) - goto fail_del_adapters; + goto fail_cleanup; /* Now create an adapter for each channel */ for (num = 0; num < data->chip->nchans; num++) { @@ -414,7 +384,16 @@ static int pca954x_probe(struct i2c_client *client, ret = i2c_mux_add_adapter(muxc, force, num, class); if (ret) - goto fail_del_adapters; + goto fail_cleanup; + } + + if (data->irq) { + ret = devm_request_threaded_irq(&client->dev, data->client->irq, + NULL, pca954x_irq_handler, + IRQF_ONESHOT | IRQF_SHARED, + "pca954x", data); + if (ret) + goto fail_cleanup; } dev_info(&client->dev, @@ -424,26 +403,16 @@ static int pca954x_probe(struct i2c_client *client, return 0; -fail_del_adapters: - i2c_mux_del_adapters(muxc); +fail_cleanup: + pca954x_cleanup(muxc); return ret; } static int pca954x_remove(struct i2c_client *client) { struct i2c_mux_core *muxc = i2c_get_clientdata(client); - struct pca954x *data = i2c_mux_priv(muxc); - int c, irq; - if (data->irq) { - for (c = 0; c < data->chip->nchans; c++) { - irq = irq_find_mapping(data->irq, c); - irq_dispose_mapping(irq); - } - irq_domain_remove(data->irq); - } - - i2c_mux_del_adapters(muxc); + pca954x_cleanup(muxc); return 0; } diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index d97031804de8..f6c9c3dc6cad 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -107,9 +107,9 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, put_device(&adapter->dev); mux->data.n_values = of_get_child_count(np); - if (of_find_property(np, "little-endian", NULL)) { + if (of_property_read_bool(np, "little-endian")) { mux->data.little_endian = true; - } else if (of_find_property(np, "big-endian", NULL)) { + } else if (of_property_read_bool(np, "big-endian")) { mux->data.little_endian = false; } else { #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \ @@ -122,10 +122,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, #error Endianness not defined? #endif } - if (of_find_property(np, "write-only", NULL)) - mux->data.write_only = true; - else - mux->data.write_only = false; + mux->data.write_only = of_property_read_bool(np, "write-only"); values = devm_kzalloc(&pdev->dev, sizeof(*mux->data.values) * mux->data.n_values, |