summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
-rw-r--r--drivers/i2c/busses/Kconfig42
1 files changed, 35 insertions, 7 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4f8df2ec87b1..451d4ae50e66 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -116,24 +116,21 @@ config I2C_I801
DH89xxCC (PCH)
Panther Point (PCH)
Lynx Point (PCH)
- Lynx Point-LP (PCH)
Avoton (SOC)
Wellsburg (PCH)
Coleto Creek (PCH)
Wildcat Point (PCH)
- Wildcat Point-LP (PCH)
BayTrail (SOC)
Braswell (SOC)
- Sunrise Point-H (PCH)
- Sunrise Point-LP (PCH)
- Kaby Lake-H (PCH)
+ Sunrise Point (PCH)
+ Kaby Lake (PCH)
DNV (SOC)
Broxton (SOC)
Lewisburg (PCH)
Gemini Lake (SOC)
- Cannon Lake-H (PCH)
- Cannon Lake-LP (PCH)
+ Cannon Lake (PCH)
Cedar Fork (PCH)
+ Ice Lake (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -762,6 +759,13 @@ config I2C_OMAP
Like OMAP1510/1610/1710/5912 and OMAP242x.
For details see http://www.ti.com/omap.
+config I2C_OWL
+ tristate "Actions Semiconductor Owl I2C Controller"
+ depends on ARCH_ACTIONS || COMPILE_TEST
+ help
+ Say Y here if you want to use the I2C bus controller on
+ the Actions Semiconductor Owl SoC's.
+
config I2C_PASEMI
tristate "PA Semi SMBus interface"
depends on PPC_PASEMI && PCI
@@ -828,6 +832,19 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
+config I2C_QCOM_GENI
+ tristate "Qualcomm Technologies Inc.'s GENI based I2C controller"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on QCOM_GENI_SE
+ help
+ This driver supports GENI serial engine based I2C controller in
+ master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
+ yes to this option, support will be included for the built-in I2C
+ interface on the Qualcomm Technologies Inc.'s SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-qcom-geni.
+
config I2C_QUP
tristate "Qualcomm QUP based I2C controller"
depends on ARCH_QCOM
@@ -1330,4 +1347,15 @@ config I2C_ZX2967
This driver can also be built as a module. If so, the module will be
called i2c-zx2967.
+config I2C_FSI
+ tristate "FSI I2C driver"
+ depends on FSI
+ help
+ Driver for FSI bus attached I2C masters. These are I2C masters that
+ are connected to the system over an FSI bus, instead of the more
+ common PCI or MMIO interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called as i2c-fsi.
+
endmenu