diff options
Diffstat (limited to 'drivers/hwmon/ntc_thermistor.c')
-rw-r--r-- | drivers/hwmon/ntc_thermistor.c | 41 |
1 files changed, 36 insertions, 5 deletions
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index cf26c44f2b88..034ef55d0706 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -14,12 +14,45 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/fixp-arith.h> +#include <linux/iio/consumer.h> +#include <linux/hwmon.h> -#include <linux/platform_data/ntc_thermistor.h> +enum ntc_thermistor_type { + TYPE_B57330V2103, + TYPE_B57891S0103, + TYPE_NCPXXWB473, + TYPE_NCPXXWF104, + TYPE_NCPXXWL333, + TYPE_NCPXXXH103, +}; -#include <linux/iio/consumer.h> +struct ntc_thermistor_platform_data { + /* + * One (not both) of read_uV and read_ohm should be provided and only + * one of the two should be provided. + * Both functions should return negative value for an error case. + * + * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use + * read_uV() + * + * How to setup pullup_ohm, pulldown_ohm, and connect is + * described at Documentation/hwmon/ntc_thermistor.rst + * + * pullup/down_ohm: 0 for infinite / not-connected + * + * chan: iio_channel pointer to communicate with the ADC which the + * thermistor is using for conversion of the analog values. + */ + int (*read_uv)(struct ntc_thermistor_platform_data *); + unsigned int pullup_uv; -#include <linux/hwmon.h> + unsigned int pullup_ohm; + unsigned int pulldown_ohm; + enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; + struct iio_channel *chan; + + int (*read_ohm)(void); +}; struct ntc_compensation { int temp_c; @@ -651,8 +684,6 @@ static int ntc_thermistor_probe(struct platform_device *pdev) pdata = ntc_thermistor_parse_dt(dev); if (IS_ERR(pdata)) return PTR_ERR(pdata); - else if (pdata == NULL) - pdata = dev_get_platdata(dev); if (!pdata) { dev_err(dev, "No platform init data supplied.\n"); |