diff options
Diffstat (limited to 'drivers/hwmon/aquacomputer_d5next.c')
| -rw-r--r-- | drivers/hwmon/aquacomputer_d5next.c | 97 |
1 files changed, 63 insertions, 34 deletions
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index 608f57f59cf9..49d3f9876fe8 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -59,7 +59,7 @@ static u8 secondary_ctrl_report[] = { 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6 }; -/* Register offsets for all Aquacomputer devices */ +/* Sensor sizes and offsets for all Aquacomputer devices */ #define AQC_TEMP_SENSOR_SIZE 0x02 #define AQC_TEMP_SENSOR_DISCONNECTED 0x7FFF #define AQC_FAN_PERCENT_OFFSET 0x00 @@ -68,67 +68,80 @@ static u8 secondary_ctrl_report[] = { #define AQC_FAN_POWER_OFFSET 0x06 #define AQC_FAN_SPEED_OFFSET 0x08 -/* Register offsets for the D5 Next pump */ -#define D5NEXT_POWER_CYCLES 0x18 -#define D5NEXT_COOLANT_TEMP 0x57 +/* Specs of the D5 Next pump */ #define D5NEXT_NUM_FANS 2 #define D5NEXT_NUM_SENSORS 1 #define D5NEXT_NUM_VIRTUAL_SENSORS 8 -#define D5NEXT_VIRTUAL_SENSORS_START 0x3f +#define D5NEXT_CTRL_REPORT_SIZE 0x329 + +/* Sensor report offsets for the D5 Next pump */ +#define D5NEXT_POWER_CYCLES 0x18 +#define D5NEXT_COOLANT_TEMP 0x57 #define D5NEXT_PUMP_OFFSET 0x6c #define D5NEXT_FAN_OFFSET 0x5f #define D5NEXT_5V_VOLTAGE 0x39 #define D5NEXT_12V_VOLTAGE 0x37 -#define D5NEXT_CTRL_REPORT_SIZE 0x329 -#define D5NEXT_TEMP_CTRL_OFFSET 0x2D +#define D5NEXT_VIRTUAL_SENSORS_START 0x3f static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET }; -/* Pump and fan speed registers in D5 Next control report (from 0-100%) */ -static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 }; +/* Control report offsets for the D5 Next pump */ +#define D5NEXT_TEMP_CTRL_OFFSET 0x2D /* Temperature sensor offsets location */ +static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 }; /* Pump and fan speed (from 0-100%) */ -/* Register offsets for the Farbwerk RGB controller */ +/* Spec and sensor report offset for the Farbwerk RGB controller */ #define FARBWERK_NUM_SENSORS 4 #define FARBWERK_SENSOR_START 0x2f -/* Register offsets for the Farbwerk 360 RGB controller */ +/* Specs of the Farbwerk 360 RGB controller */ #define FARBWERK360_NUM_SENSORS 4 -#define FARBWERK360_SENSOR_START 0x32 #define FARBWERK360_NUM_VIRTUAL_SENSORS 16 -#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a #define FARBWERK360_CTRL_REPORT_SIZE 0x682 + +/* Sensor report offsets for the Farbwerk 360 */ +#define FARBWERK360_SENSOR_START 0x32 +#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a + +/* Control report offsets for the Farbwerk 360 */ #define FARBWERK360_TEMP_CTRL_OFFSET 0x8 -/* Register offsets for the Octo fan controller */ -#define OCTO_POWER_CYCLES 0x18 +/* Specs of the Octo fan controller */ #define OCTO_NUM_FANS 8 #define OCTO_NUM_SENSORS 4 -#define OCTO_SENSOR_START 0x3D #define OCTO_NUM_VIRTUAL_SENSORS 16 -#define OCTO_VIRTUAL_SENSORS_START 0x45 #define OCTO_CTRL_REPORT_SIZE 0x65F -#define OCTO_TEMP_CTRL_OFFSET 0xA + +/* Sensor report offsets for the Octo */ +#define OCTO_POWER_CYCLES 0x18 +#define OCTO_SENSOR_START 0x3D +#define OCTO_VIRTUAL_SENSORS_START 0x45 static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 }; -/* Fan speed registers in Octo control report (from 0-100%) */ +/* Control report offsets for the Octo */ +#define OCTO_TEMP_CTRL_OFFSET 0xA +/* Fan speed offsets (0-100%) */ static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE }; -/* Register offsets for the Quadro fan controller */ -#define QUADRO_POWER_CYCLES 0x18 +/* Specs of Quadro fan controller */ #define QUADRO_NUM_FANS 4 #define QUADRO_NUM_SENSORS 4 -#define QUADRO_SENSOR_START 0x34 #define QUADRO_NUM_VIRTUAL_SENSORS 16 -#define QUADRO_VIRTUAL_SENSORS_START 0x3c #define QUADRO_CTRL_REPORT_SIZE 0x3c1 + +/* Sensor report offsets for the Quadro */ +#define QUADRO_POWER_CYCLES 0x18 +#define QUADRO_SENSOR_START 0x34 +#define QUADRO_VIRTUAL_SENSORS_START 0x3c #define QUADRO_FLOW_SENSOR_OFFSET 0x6e -#define QUADRO_TEMP_CTRL_OFFSET 0xA static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 }; -/* Fan speed registers in Quadro control report (from 0-100%) */ -static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; +/* Control report offsets for the Quadro */ +#define QUADRO_TEMP_CTRL_OFFSET 0xA +static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed offsets (0-100%) */ -/* Register offsets for the High Flow Next */ +/* Specs of High Flow Next flow sensor */ #define HIGHFLOWNEXT_NUM_SENSORS 2 + +/* Sensor report offsets for the High Flow Next */ #define HIGHFLOWNEXT_SENSOR_START 85 #define HIGHFLOWNEXT_FLOW 81 #define HIGHFLOWNEXT_WATER_QUALITY 89 @@ -903,14 +916,17 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->num_fans = D5NEXT_NUM_FANS; priv->fan_sensor_offsets = d5next_sensor_fan_offsets; priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets; + priv->num_temp_sensors = D5NEXT_NUM_SENSORS; priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP; priv->num_virtual_temp_sensors = D5NEXT_NUM_VIRTUAL_SENSORS; priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START; - priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES; - priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE; priv->temp_ctrl_offset = D5NEXT_TEMP_CTRL_OFFSET; + priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE; + + priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES; + priv->temp_label = label_d5next_temp; priv->virtual_temp_label = label_virtual_temp_sensors; priv->speed_label = label_d5next_speeds; @@ -922,20 +938,25 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->kind = farbwerk; priv->num_fans = 0; + priv->num_temp_sensors = FARBWERK_NUM_SENSORS; priv->temp_sensor_start_offset = FARBWERK_SENSOR_START; + priv->temp_label = label_temp_sensors; break; case USB_PRODUCT_ID_FARBWERK360: priv->kind = farbwerk360; priv->num_fans = 0; + priv->num_temp_sensors = FARBWERK360_NUM_SENSORS; priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START; priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS; priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START; - priv->buffer_size = FARBWERK360_CTRL_REPORT_SIZE; priv->temp_ctrl_offset = FARBWERK360_TEMP_CTRL_OFFSET; + + priv->buffer_size = FARBWERK360_CTRL_REPORT_SIZE; + priv->temp_label = label_temp_sensors; priv->virtual_temp_label = label_virtual_temp_sensors; break; @@ -945,14 +966,17 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->num_fans = OCTO_NUM_FANS; priv->fan_sensor_offsets = octo_sensor_fan_offsets; priv->fan_ctrl_offsets = octo_ctrl_fan_offsets; + priv->num_temp_sensors = OCTO_NUM_SENSORS; priv->temp_sensor_start_offset = OCTO_SENSOR_START; priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS; priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START; - priv->power_cycle_count_offset = OCTO_POWER_CYCLES; - priv->buffer_size = OCTO_CTRL_REPORT_SIZE; priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET; + priv->buffer_size = OCTO_CTRL_REPORT_SIZE; + + priv->power_cycle_count_offset = OCTO_POWER_CYCLES; + priv->temp_label = label_temp_sensors; priv->virtual_temp_label = label_virtual_temp_sensors; priv->speed_label = label_fan_speed; @@ -966,14 +990,17 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->num_fans = QUADRO_NUM_FANS; priv->fan_sensor_offsets = quadro_sensor_fan_offsets; priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets; + priv->num_temp_sensors = QUADRO_NUM_SENSORS; priv->temp_sensor_start_offset = QUADRO_SENSOR_START; priv->num_virtual_temp_sensors = QUADRO_NUM_VIRTUAL_SENSORS; priv->virtual_temp_sensor_start_offset = QUADRO_VIRTUAL_SENSORS_START; - priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; + priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET; + priv->buffer_size = QUADRO_CTRL_REPORT_SIZE; + priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET; - priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET; + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; priv->temp_label = label_temp_sensors; priv->virtual_temp_label = label_virtual_temp_sensors; @@ -986,8 +1013,10 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->kind = highflownext; priv->num_fans = 0; + priv->num_temp_sensors = HIGHFLOWNEXT_NUM_SENSORS; priv->temp_sensor_start_offset = HIGHFLOWNEXT_SENSOR_START; + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; priv->temp_label = label_highflownext_temp_sensors; |