summaryrefslogtreecommitdiffstats
path: root/drivers/hid/intel-ish-hid
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hid/intel-ish-hid')
-rw-r--r--drivers/hid/intel-ish-hid/ipc/ipc.c102
-rw-r--r--drivers/hid/intel-ish-hid/ipc/pci-ish.c6
2 files changed, 76 insertions, 32 deletions
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index e2517c11e0ee..0c9ac4d5d850 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -638,6 +638,58 @@ eoi:
}
/**
+ * ish_disable_dma() - disable dma communication between host and ISHFW
+ * @dev: ishtp device pointer
+ *
+ * Clear the dma enable bit and wait for dma inactive.
+ *
+ * Return: 0 for success else error code.
+ */
+static int ish_disable_dma(struct ishtp_device *dev)
+{
+ unsigned int dma_delay;
+
+ /* Clear the dma enable bit */
+ ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
+
+ /* wait for dma inactive */
+ for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
+ _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
+ dma_delay += 5)
+ mdelay(5);
+
+ if (dma_delay >= MAX_DMA_DELAY) {
+ dev_err(dev->devc,
+ "Wait for DMA inactive timeout\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
+ * ish_wakeup() - wakeup ishfw from waiting-for-host state
+ * @dev: ishtp device pointer
+ *
+ * Set the dma enable bit and send a void message to FW,
+ * it wil wakeup FW from waiting-for-host state.
+ */
+static void ish_wakeup(struct ishtp_device *dev)
+{
+ /* Set dma enable bit */
+ ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
+
+ /*
+ * Send 0 IPC message so that ISH FW wakes up if it was already
+ * asleep.
+ */
+ ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
+
+ /* Flush writes to doorbell and REMAP2 */
+ ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+}
+
+/**
* _ish_hw_reset() - HW reset
* @dev: ishtp device pointer
*
@@ -649,7 +701,6 @@ static int _ish_hw_reset(struct ishtp_device *dev)
{
struct pci_dev *pdev = dev->pdev;
int rv;
- unsigned int dma_delay;
uint16_t csr;
if (!pdev)
@@ -664,15 +715,8 @@ static int _ish_hw_reset(struct ishtp_device *dev)
return -EINVAL;
}
- /* Now trigger reset to FW */
- ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
-
- for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
- _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
- dma_delay += 5)
- mdelay(5);
-
- if (dma_delay >= MAX_DMA_DELAY) {
+ /* Disable dma communication between FW and host */
+ if (ish_disable_dma(dev)) {
dev_err(&pdev->dev,
"Can't reset - stuck with DMA in-progress\n");
return -EBUSY;
@@ -690,16 +734,8 @@ static int _ish_hw_reset(struct ishtp_device *dev)
csr |= PCI_D0;
pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
- ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
-
- /*
- * Send 0 IPC message so that ISH FW wakes up if it was already
- * asleep
- */
- ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
-
- /* Flush writes to doorbell and REMAP2 */
- ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+ /* Now we can enable ISH DMA operation and wakeup ISHFW */
+ ish_wakeup(dev);
return 0;
}
@@ -758,16 +794,9 @@ static int _ish_ipc_reset(struct ishtp_device *dev)
int ish_hw_start(struct ishtp_device *dev)
{
ish_set_host_rdy(dev);
- /* After that we can enable ISH DMA operation */
- ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
- /*
- * Send 0 IPC message so that ISH FW wakes up if it was already
- * asleep
- */
- ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
- /* Flush write to doorbell */
- ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+ /* After that we can enable ISH DMA operation and wakeup ISHFW */
+ ish_wakeup(dev);
set_host_ready(dev);
@@ -876,6 +905,21 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
*/
void ish_device_disable(struct ishtp_device *dev)
{
+ struct pci_dev *pdev = dev->pdev;
+
+ if (!pdev)
+ return;
+
+ /* Disable dma communication between FW and host */
+ if (ish_disable_dma(dev)) {
+ dev_err(&pdev->dev,
+ "Can't reset - stuck with DMA in-progress\n");
+ return;
+ }
+
+ /* Put ISH to D3hot state for power saving */
+ pci_set_power_state(pdev, PCI_D3hot);
+
dev->dev_state = ISHTP_DEV_DISABLED;
ish_clr_host_rdy(dev);
}
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index 42f0beeb09fd..20d647d2dd2c 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -146,7 +146,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
/* request and enable interrupt */
- ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND,
+ ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED,
KBUILD_MODNAME, dev);
if (ret) {
dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n",
@@ -202,6 +202,7 @@ static void ish_remove(struct pci_dev *pdev)
kfree(ishtp_dev);
}
+#ifdef CONFIG_PM
static struct device *ish_resume_device;
/**
@@ -293,7 +294,6 @@ static int ish_resume(struct device *device)
return 0;
}
-#ifdef CONFIG_PM
static const struct dev_pm_ops ish_pm_ops = {
.suspend = ish_suspend,
.resume = ish_resume,
@@ -301,7 +301,7 @@ static const struct dev_pm_ops ish_pm_ops = {
#define ISHTP_ISH_PM_OPS (&ish_pm_ops)
#else
#define ISHTP_ISH_PM_OPS NULL
-#endif
+#endif /* CONFIG_PM */
static struct pci_driver ish_driver = {
.name = KBUILD_MODNAME,