diff options
Diffstat (limited to 'drivers/gpu/drm/via')
| -rw-r--r-- | drivers/gpu/drm/via/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/via/via_dmablit.c | 807 | ||||
| -rw-r--r-- | drivers/gpu/drm/via/via_dmablit.h | 140 | ||||
| -rw-r--r-- | drivers/gpu/drm/via/via_dri1.c | 786 | ||||
| -rw-r--r-- | drivers/gpu/drm/via/via_drv.h | 56 |
5 files changed, 835 insertions, 956 deletions
diff --git a/drivers/gpu/drm/via/Makefile b/drivers/gpu/drm/via/Makefile index dd75ea8a1423..66125b150478 100644 --- a/drivers/gpu/drm/via/Makefile +++ b/drivers/gpu/drm/via/Makefile @@ -3,6 +3,6 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -via-y := via_dri1.o via_verifier.o via_dmablit.o +via-y := via_dri1.o via_verifier.o obj-$(CONFIG_DRM_VIA) +=via.o diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c deleted file mode 100644 index e016a4d62090..000000000000 --- a/drivers/gpu/drm/via/via_dmablit.c +++ /dev/null @@ -1,807 +0,0 @@ -/* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * - * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Hellstrom. - * Partially based on code obtained from Digeo Inc. - */ - - -/* - * Unmaps the DMA mappings. - * FIXME: Is this a NoOp on x86? Also - * FIXME: What happens if this one is called and a pending blit has previously done - * the same DMA mappings? - */ - -#include <linux/pagemap.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <drm/drm_device.h> -#include <drm/via_drm.h> - -#include "via_dmablit.h" -#include "via_drv.h" - -#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK) -#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK) -#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT) - -typedef struct _drm_via_descriptor { - uint32_t mem_addr; - uint32_t dev_addr; - uint32_t size; - uint32_t next; -} drm_via_descriptor_t; - - -/* - * Unmap a DMA mapping. - */ - - - -static void -via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - int num_desc = vsg->num_desc; - unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; - unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; - drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - dma_addr_t next = vsg->chain_start; - - while (num_desc--) { - if (descriptor_this_page-- == 0) { - cur_descriptor_page--; - descriptor_this_page = vsg->descriptors_per_page - 1; - desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - } - dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); - dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction); - next = (dma_addr_t) desc_ptr->next; - desc_ptr--; - } -} - -/* - * If mode = 0, count how many descriptors are needed. - * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors. - * Descriptors are run in reverse order by the hardware because we are not allowed to update the - * 'next' field without syncing calls when the descriptor is already mapped. - */ - -static void -via_map_blit_for_device(struct pci_dev *pdev, - const drm_via_dmablit_t *xfer, - drm_via_sg_info_t *vsg, - int mode) -{ - unsigned cur_descriptor_page = 0; - unsigned num_descriptors_this_page = 0; - unsigned char *mem_addr = xfer->mem_addr; - unsigned char *cur_mem; - unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr); - uint32_t fb_addr = xfer->fb_addr; - uint32_t cur_fb; - unsigned long line_len; - unsigned remaining_len; - int num_desc = 0; - int cur_line; - dma_addr_t next = 0 | VIA_DMA_DPR_EC; - drm_via_descriptor_t *desc_ptr = NULL; - - if (mode == 1) - desc_ptr = vsg->desc_pages[cur_descriptor_page]; - - for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { - - line_len = xfer->line_length; - cur_fb = fb_addr; - cur_mem = mem_addr; - - while (line_len > 0) { - - remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); - line_len -= remaining_len; - - if (mode == 1) { - desc_ptr->mem_addr = - dma_map_page(&pdev->dev, - vsg->pages[VIA_PFN(cur_mem) - - VIA_PFN(first_addr)], - VIA_PGOFF(cur_mem), remaining_len, - vsg->direction); - desc_ptr->dev_addr = cur_fb; - - desc_ptr->size = remaining_len; - desc_ptr->next = (uint32_t) next; - next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), - DMA_TO_DEVICE); - desc_ptr++; - if (++num_descriptors_this_page >= vsg->descriptors_per_page) { - num_descriptors_this_page = 0; - desc_ptr = vsg->desc_pages[++cur_descriptor_page]; - } - } - - num_desc++; - cur_mem += remaining_len; - cur_fb += remaining_len; - } - - mem_addr += xfer->mem_stride; - fb_addr += xfer->fb_stride; - } - - if (mode == 1) { - vsg->chain_start = next; - vsg->state = dr_via_device_mapped; - } - vsg->num_desc = num_desc; -} - -/* - * Function that frees up all resources for a blit. It is usable even if the - * blit info has only been partially built as long as the status enum is consistent - * with the actual status of the used resources. - */ - - -static void -via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - int i; - - switch (vsg->state) { - case dr_via_device_mapped: - via_unmap_blit_from_device(pdev, vsg); - fallthrough; - case dr_via_desc_pages_alloc: - for (i = 0; i < vsg->num_desc_pages; ++i) { - if (vsg->desc_pages[i] != NULL) - free_page((unsigned long)vsg->desc_pages[i]); - } - kfree(vsg->desc_pages); - fallthrough; - case dr_via_pages_locked: - unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages, - (vsg->direction == DMA_FROM_DEVICE)); - fallthrough; - case dr_via_pages_alloc: - vfree(vsg->pages); - fallthrough; - default: - vsg->state = dr_via_sg_init; - } - vfree(vsg->bounce_buffer); - vsg->bounce_buffer = NULL; - vsg->free_on_sequence = 0; -} - -/* - * Fire a blit engine. - */ - -static void -via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | - VIA_DMA_CSR_DE); - via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); - via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start); - wmb(); - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS); - via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04); -} - -/* - * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will - * occur here if the calling user does not have access to the submitted address. - */ - -static int -via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - int ret; - unsigned long first_pfn = VIA_PFN(xfer->mem_addr); - vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) - - first_pfn + 1; - - vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages)); - if (NULL == vsg->pages) - return -ENOMEM; - ret = pin_user_pages_fast((unsigned long)xfer->mem_addr, - vsg->num_pages, - vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0, - vsg->pages); - if (ret != vsg->num_pages) { - if (ret < 0) - return ret; - vsg->state = dr_via_pages_locked; - return -EINVAL; - } - vsg->state = dr_via_pages_locked; - DRM_DEBUG("DMA pages locked\n"); - return 0; -} - -/* - * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the - * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be - * quite large for some blits, and pages don't need to be contiguous. - */ - -static int -via_alloc_desc_pages(drm_via_sg_info_t *vsg) -{ - int i; - - vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t); - vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / - vsg->descriptors_per_page; - - if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL))) - return -ENOMEM; - - vsg->state = dr_via_desc_pages_alloc; - for (i = 0; i < vsg->num_desc_pages; ++i) { - if (NULL == (vsg->desc_pages[i] = - (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) - return -ENOMEM; - } - DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages, - vsg->num_desc); - return 0; -} - -static void -via_abort_dmablit(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA); -} - -static void -via_dmablit_engine_off(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); -} - - - -/* - * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here. - * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue - * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while - * the workqueue task takes care of processing associated with the old blit. - */ - -void -via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - int cur; - int done_transfer; - unsigned long irqsave = 0; - uint32_t status = 0; - - DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n", - engine, from_irq, (unsigned long) blitq); - - if (from_irq) - spin_lock(&blitq->blit_lock); - else - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - done_transfer = blitq->is_active && - ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); - done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE)); - - cur = blitq->cur; - if (done_transfer) { - - blitq->blits[cur]->aborted = blitq->aborting; - blitq->done_blit_handle++; - wake_up(blitq->blit_queue + cur); - - cur++; - if (cur >= VIA_NUM_BLIT_SLOTS) - cur = 0; - blitq->cur = cur; - - /* - * Clear transfer done flag. - */ - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD); - - blitq->is_active = 0; - blitq->aborting = 0; - schedule_work(&blitq->wq); - - } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { - - /* - * Abort transfer after one second. - */ - - via_abort_dmablit(dev, engine); - blitq->aborting = 1; - blitq->end = jiffies + HZ; - } - - if (!blitq->is_active) { - if (blitq->num_outstanding) { - via_fire_dmablit(dev, blitq->blits[cur], engine); - blitq->is_active = 1; - blitq->cur = cur; - blitq->num_outstanding--; - blitq->end = jiffies + HZ; - if (!timer_pending(&blitq->poll_timer)) - mod_timer(&blitq->poll_timer, jiffies + 1); - } else { - if (timer_pending(&blitq->poll_timer)) - del_timer(&blitq->poll_timer); - via_dmablit_engine_off(dev, engine); - } - } - - if (from_irq) - spin_unlock(&blitq->blit_lock); - else - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); -} - - - -/* - * Check whether this blit is still active, performing necessary locking. - */ - -static int -via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue) -{ - unsigned long irqsave; - uint32_t slot; - int active; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - /* - * Allow for handle wraparounds. - */ - - active = ((blitq->done_blit_handle - handle) > (1 << 23)) && - ((blitq->cur_blit_handle - handle) <= (1 << 23)); - - if (queue && active) { - slot = handle - blitq->done_blit_handle + blitq->cur - 1; - if (slot >= VIA_NUM_BLIT_SLOTS) - slot -= VIA_NUM_BLIT_SLOTS; - *queue = blitq->blit_queue + slot; - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return active; -} - -/* - * Sync. Wait for at least three seconds for the blit to be performed. - */ - -static int -via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) -{ - - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - wait_queue_head_t *queue; - int ret = 0; - - if (via_dmablit_active(blitq, engine, handle, &queue)) { - VIA_WAIT_ON(ret, *queue, 3 * HZ, - !via_dmablit_active(blitq, engine, handle, NULL)); - } - DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", - handle, engine, ret); - - return ret; -} - - -/* - * A timer that regularly polls the blit engine in cases where we don't have interrupts: - * a) Broken hardware (typically those that don't have any video capture facility). - * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted. - * The timer and hardware IRQ's can and do work in parallel. If the hardware has - * irqs, it will shorten the latency somewhat. - */ - - - -static void -via_dmablit_timer(struct timer_list *t) -{ - drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer); - struct drm_device *dev = blitq->dev; - int engine = (int) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); - - DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, - (unsigned long) jiffies); - - via_dmablit_handler(dev, engine, 0); - - if (!timer_pending(&blitq->poll_timer)) { - mod_timer(&blitq->poll_timer, jiffies + 1); - - /* - * Rerun handler to delete timer if engines are off, and - * to shorten abort latency. This is a little nasty. - */ - - via_dmablit_handler(dev, engine, 0); - - } -} - - - - -/* - * Workqueue task that frees data and mappings associated with a blit. - * Also wakes up waiting processes. Each of these tasks handles one - * blit engine only and may not be called on each interrupt. - */ - - -static void -via_dmablit_workqueue(struct work_struct *work) -{ - drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); - struct drm_device *dev = blitq->dev; - struct pci_dev *pdev = to_pci_dev(dev->dev); - unsigned long irqsave; - drm_via_sg_info_t *cur_sg; - int cur_released; - - - DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - while (blitq->serviced != blitq->cur) { - - cur_released = blitq->serviced++; - - DRM_DEBUG("Releasing blit slot %d\n", cur_released); - - if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) - blitq->serviced = 0; - - cur_sg = blitq->blits[cur_released]; - blitq->num_free++; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - wake_up(&blitq->busy_queue); - - via_free_sg_info(pdev, cur_sg); - kfree(cur_sg); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); -} - - -/* - * Init all blit engines. Currently we use two, but some hardware have 4. - */ - - -void -via_init_dmablit(struct drm_device *dev) -{ - int i, j; - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - struct pci_dev *pdev = to_pci_dev(dev->dev); - drm_via_blitq_t *blitq; - - pci_set_master(pdev); - - for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) { - blitq = dev_priv->blit_queues + i; - blitq->dev = dev; - blitq->cur_blit_handle = 0; - blitq->done_blit_handle = 0; - blitq->head = 0; - blitq->cur = 0; - blitq->serviced = 0; - blitq->num_free = VIA_NUM_BLIT_SLOTS - 1; - blitq->num_outstanding = 0; - blitq->is_active = 0; - blitq->aborting = 0; - spin_lock_init(&blitq->blit_lock); - for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j) - init_waitqueue_head(blitq->blit_queue + j); - init_waitqueue_head(&blitq->busy_queue); - INIT_WORK(&blitq->wq, via_dmablit_workqueue); - timer_setup(&blitq->poll_timer, via_dmablit_timer, 0); - } -} - -/* - * Build all info and do all mappings required for a blit. - */ - - -static int -via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - struct pci_dev *pdev = to_pci_dev(dev->dev); - int draw = xfer->to_fb; - int ret = 0; - - vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; - vsg->bounce_buffer = NULL; - - vsg->state = dr_via_sg_init; - - if (xfer->num_lines <= 0 || xfer->line_length <= 0) { - DRM_ERROR("Zero size bitblt.\n"); - return -EINVAL; - } - - /* - * Below check is a driver limitation, not a hardware one. We - * don't want to lock unused pages, and don't want to incoporate the - * extra logic of avoiding them. Make sure there are no. - * (Not a big limitation anyway.) - */ - - if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { - DRM_ERROR("Too large system memory stride. Stride: %d, " - "Length: %d\n", xfer->mem_stride, xfer->line_length); - return -EINVAL; - } - - if ((xfer->mem_stride == xfer->line_length) && - (xfer->fb_stride == xfer->line_length)) { - xfer->mem_stride *= xfer->num_lines; - xfer->line_length = xfer->mem_stride; - xfer->fb_stride = xfer->mem_stride; - xfer->num_lines = 1; - } - - /* - * Don't lock an arbitrary large number of pages, since that causes a - * DOS security hole. - */ - - if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { - DRM_ERROR("Too large PCI DMA bitblt.\n"); - return -EINVAL; - } - - /* - * we allow a negative fb stride to allow flipping of images in - * transfer. - */ - - if (xfer->mem_stride < xfer->line_length || - abs(xfer->fb_stride) < xfer->line_length) { - DRM_ERROR("Invalid frame-buffer / memory stride.\n"); - return -EINVAL; - } - - /* - * A hardware bug seems to be worked around if system memory addresses start on - * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted - * about this. Meanwhile, impose the following restrictions: - */ - -#ifdef VIA_BUGFREE - if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#else - if ((((unsigned long)xfer->mem_addr & 15) || - ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && - ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#endif - - if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { - DRM_ERROR("Could not lock DMA pages.\n"); - via_free_sg_info(pdev, vsg); - return ret; - } - - via_map_blit_for_device(pdev, xfer, vsg, 0); - if (0 != (ret = via_alloc_desc_pages(vsg))) { - DRM_ERROR("Could not allocate DMA descriptor pages.\n"); - via_free_sg_info(pdev, vsg); - return ret; - } - via_map_blit_for_device(pdev, xfer, vsg, 1); - - return 0; -} - - -/* - * Reserve one free slot in the blit queue. Will wait for one second for one - * to become available. Otherwise -EBUSY is returned. - */ - -static int -via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) -{ - int ret = 0; - unsigned long irqsave; - - DRM_DEBUG("Num free is %d\n", blitq->num_free); - spin_lock_irqsave(&blitq->blit_lock, irqsave); - while (blitq->num_free == 0) { - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0); - if (ret) - return (-EINTR == ret) ? -EAGAIN : ret; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - blitq->num_free--; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return 0; -} - -/* - * Hand back a free slot if we changed our mind. - */ - -static void -via_dmablit_release_slot(drm_via_blitq_t *blitq) -{ - unsigned long irqsave; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - blitq->num_free++; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - wake_up(&blitq->busy_queue); -} - -/* - * Grab a free slot. Build blit info and queue a blit. - */ - - -static int -via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_sg_info_t *vsg; - drm_via_blitq_t *blitq; - int ret; - int engine; - unsigned long irqsave; - - if (dev_priv == NULL) { - DRM_ERROR("Called without initialization.\n"); - return -EINVAL; - } - - engine = (xfer->to_fb) ? 0 : 1; - blitq = dev_priv->blit_queues + engine; - if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) - return ret; - if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) { - via_dmablit_release_slot(blitq); - return -ENOMEM; - } - if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) { - via_dmablit_release_slot(blitq); - kfree(vsg); - return ret; - } - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - blitq->blits[blitq->head++] = vsg; - if (blitq->head >= VIA_NUM_BLIT_SLOTS) - blitq->head = 0; - blitq->num_outstanding++; - xfer->sync.sync_handle = ++blitq->cur_blit_handle; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - xfer->sync.engine = engine; - - via_dmablit_handler(dev, engine, 0); - - return 0; -} - -/* - * Sync on a previously submitted blit. Note that the X server use signals extensively, and - * that there is a very big probability that this IOCTL will be interrupted by a signal. In that - * case it returns with -EAGAIN for the signal to be delivered. - * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). - */ - -int -via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_blitsync_t *sync = data; - int err; - - if (sync->engine >= VIA_NUM_BLIT_ENGINES) - return -EINVAL; - - err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); - - if (-EINTR == err) - err = -EAGAIN; - - return err; -} - - -/* - * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal - * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should - * be reissued. See the above IOCTL code. - */ - -int -via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_dmablit_t *xfer = data; - int err; - - err = via_dmablit(dev, xfer); - - return err; -} diff --git a/drivers/gpu/drm/via/via_dmablit.h b/drivers/gpu/drm/via/via_dmablit.h deleted file mode 100644 index 9b662a327cef..000000000000 --- a/drivers/gpu/drm/via/via_dmablit.h +++ /dev/null @@ -1,140 +0,0 @@ -/* via_dmablit.h -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * - * Copyright 2005 Thomas Hellstrom. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Hellstrom. - * Register info from Digeo Inc. - */ - -#ifndef _VIA_DMABLIT_H -#define _VIA_DMABLIT_H - -#include <linux/dma-mapping.h> - -#define VIA_NUM_BLIT_ENGINES 2 -#define VIA_NUM_BLIT_SLOTS 8 - -struct _drm_via_descriptor; - -typedef struct _drm_via_sg_info { - struct page **pages; - unsigned long num_pages; - struct _drm_via_descriptor **desc_pages; - int num_desc_pages; - int num_desc; - enum dma_data_direction direction; - unsigned char *bounce_buffer; - dma_addr_t chain_start; - uint32_t free_on_sequence; - unsigned int descriptors_per_page; - int aborted; - enum { - dr_via_device_mapped, - dr_via_desc_pages_alloc, - dr_via_pages_locked, - dr_via_pages_alloc, - dr_via_sg_init - } state; -} drm_via_sg_info_t; - -typedef struct _drm_via_blitq { - struct drm_device *dev; - uint32_t cur_blit_handle; - uint32_t done_blit_handle; - unsigned serviced; - unsigned head; - unsigned cur; - unsigned num_free; - unsigned num_outstanding; - unsigned long end; - int aborting; - int is_active; - drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS]; - spinlock_t blit_lock; - wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS]; - wait_queue_head_t busy_queue; - struct work_struct wq; - struct timer_list poll_timer; -} drm_via_blitq_t; - - -/* - * PCI DMA Registers - * Channels 2 & 3 don't seem to be implemented in hardware. - */ - -#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ -#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ -#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ -#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ - -#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ -#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ -#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ -#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ - -#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ -#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ -#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ -#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ - -#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ -#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ -#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ -#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ - -#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ -#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ -#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ -#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ - -#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ -#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ -#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ -#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ - -#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ - -/* Define for DMA engine */ -/* DPR */ -#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ -#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */ -#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */ - -/* MR */ -#define VIA_DMA_MR_CM (1<<0) /* chaining mode */ -#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */ -#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */ - -/* CSR */ -#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */ -#define VIA_DMA_CSR_TS (1<<1) /* transfer start */ -#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */ -#define VIA_DMA_CSR_TD (1<<3) /* transfer done */ -#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */ -#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ - - - -#endif diff --git a/drivers/gpu/drm/via/via_dri1.c b/drivers/gpu/drm/via/via_dri1.c index 32aae172c6f3..f8b1f837feb1 100644 --- a/drivers/gpu/drm/via/via_dri1.c +++ b/drivers/gpu/drm/via/via_dri1.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/vmalloc.h> #include <drm/drm_drv.h> #include <drm/drm_file.h> @@ -99,6 +100,62 @@ struct via_memblock { #define VIA_IRQ_DMA1_TD_PENDING (1 << 7) /* + * PCI DMA Registers + * Channels 2 & 3 don't seem to be implemented in hardware. + */ + +#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ +#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ +#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ +#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ + +#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ +#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ +#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ +#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ + +#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ +#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ +#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ +#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ + +#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ +#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ +#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ +#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ + +#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ +#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ +#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ +#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ + +#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ +#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ +#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ +#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ + +#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ + +/* Define for DMA engine */ +/* DPR */ +#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ +#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */ +#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */ + +/* MR */ +#define VIA_DMA_MR_CM (1<<0) /* chaining mode */ +#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */ +#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */ + +/* CSR */ +#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */ +#define VIA_DMA_CSR_TS (1<<1) /* transfer start */ +#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */ +#define VIA_DMA_CSR_TD (1<<3) /* transfer done */ +#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */ +#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ + +/* * Device-specific IRQs go here. This type might need to be extended with * the register if there are multiple IRQ control registers. * Currently we activate the HQV interrupts of Unichrome Pro group A. @@ -127,6 +184,735 @@ static int via_num_unichrome = ARRAY_SIZE(via_unichrome_irqs); static int via_irqmap_unichrome[] = {-1, -1, -1, 0, -1, 1}; +/* + * Unmaps the DMA mappings. + * FIXME: Is this a NoOp on x86? Also + * FIXME: What happens if this one is called and a pending blit has previously done + * the same DMA mappings? + */ +#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK) +#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK) +#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT) + +typedef struct _drm_via_descriptor { + uint32_t mem_addr; + uint32_t dev_addr; + uint32_t size; + uint32_t next; +} drm_via_descriptor_t; + + +/* + * Unmap a DMA mapping. + */ +static void +via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) +{ + int num_desc = vsg->num_desc; + unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; + unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; + drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + + descriptor_this_page; + dma_addr_t next = vsg->chain_start; + + while (num_desc--) { + if (descriptor_this_page-- == 0) { + cur_descriptor_page--; + descriptor_this_page = vsg->descriptors_per_page - 1; + desc_ptr = vsg->desc_pages[cur_descriptor_page] + + descriptor_this_page; + } + dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); + dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction); + next = (dma_addr_t) desc_ptr->next; + desc_ptr--; + } +} + +/* + * If mode = 0, count how many descriptors are needed. + * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors. + * Descriptors are run in reverse order by the hardware because we are not allowed to update the + * 'next' field without syncing calls when the descriptor is already mapped. + */ +static void +via_map_blit_for_device(struct pci_dev *pdev, + const drm_via_dmablit_t *xfer, + drm_via_sg_info_t *vsg, + int mode) +{ + unsigned cur_descriptor_page = 0; + unsigned num_descriptors_this_page = 0; + unsigned char *mem_addr = xfer->mem_addr; + unsigned char *cur_mem; + unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr); + uint32_t fb_addr = xfer->fb_addr; + uint32_t cur_fb; + unsigned long line_len; + unsigned remaining_len; + int num_desc = 0; + int cur_line; + dma_addr_t next = 0 | VIA_DMA_DPR_EC; + drm_via_descriptor_t *desc_ptr = NULL; + + if (mode == 1) + desc_ptr = vsg->desc_pages[cur_descriptor_page]; + + for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { + + line_len = xfer->line_length; + cur_fb = fb_addr; + cur_mem = mem_addr; + + while (line_len > 0) { + + remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); + line_len -= remaining_len; + + if (mode == 1) { + desc_ptr->mem_addr = + dma_map_page(&pdev->dev, + vsg->pages[VIA_PFN(cur_mem) - + VIA_PFN(first_addr)], + VIA_PGOFF(cur_mem), remaining_len, + vsg->direction); + desc_ptr->dev_addr = cur_fb; + + desc_ptr->size = remaining_len; + desc_ptr->next = (uint32_t) next; + next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), + DMA_TO_DEVICE); + desc_ptr++; + if (++num_descriptors_this_page >= vsg->descriptors_per_page) { + num_descriptors_this_page = 0; + desc_ptr = vsg->desc_pages[++cur_descriptor_page]; + } + } + + num_desc++; + cur_mem += remaining_len; + cur_fb += remaining_len; + } + + mem_addr += xfer->mem_stride; + fb_addr += xfer->fb_stride; + } + + if (mode == 1) { + vsg->chain_start = next; + vsg->state = dr_via_device_mapped; + } + vsg->num_desc = num_desc; +} + +/* + * Function that frees up all resources for a blit. It is usable even if the + * blit info has only been partially built as long as the status enum is consistent + * with the actual status of the used resources. + */ +static void +via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) +{ + int i; + + switch (vsg->state) { + case dr_via_device_mapped: + via_unmap_blit_from_device(pdev, vsg); + fallthrough; + case dr_via_desc_pages_alloc: + for (i = 0; i < vsg->num_desc_pages; ++i) { + if (vsg->desc_pages[i] != NULL) + free_page((unsigned long)vsg->desc_pages[i]); + } + kfree(vsg->desc_pages); + fallthrough; + case dr_via_pages_locked: + unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages, + (vsg->direction == DMA_FROM_DEVICE)); + fallthrough; + case dr_via_pages_alloc: + vfree(vsg->pages); + fallthrough; + default: + vsg->state = dr_via_sg_init; + } + vfree(vsg->bounce_buffer); + vsg->bounce_buffer = NULL; + vsg->free_on_sequence = 0; +} + +/* + * Fire a blit engine. + */ +static void +via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | + VIA_DMA_CSR_DE); + via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); + via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start); + wmb(); + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS); + via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04); +} + +/* + * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will + * occur here if the calling user does not have access to the submitted address. + */ +static int +via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) +{ + int ret; + unsigned long first_pfn = VIA_PFN(xfer->mem_addr); + vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) - + first_pfn + 1; + + vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages)); + if (NULL == vsg->pages) + return -ENOMEM; + ret = pin_user_pages_fast((unsigned long)xfer->mem_addr, + vsg->num_pages, + vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0, + vsg->pages); + if (ret != vsg->num_pages) { + if (ret < 0) + return ret; + vsg->state = dr_via_pages_locked; + return -EINVAL; + } + vsg->state = dr_via_pages_locked; + DRM_DEBUG("DMA pages locked\n"); + return 0; +} + +/* + * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the + * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be + * quite large for some blits, and pages don't need to be contiguous. + */ +static int +via_alloc_desc_pages(drm_via_sg_info_t *vsg) +{ + int i; + + vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t); + vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / + vsg->descriptors_per_page; + + if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL))) + return -ENOMEM; + + vsg->state = dr_via_desc_pages_alloc; + for (i = 0; i < vsg->num_desc_pages; ++i) { + if (NULL == (vsg->desc_pages[i] = + (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) + return -ENOMEM; + } + DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages, + vsg->num_desc); + return 0; +} + +static void +via_abort_dmablit(struct drm_device *dev, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA); +} + +static void +via_dmablit_engine_off(struct drm_device *dev, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); +} + +/* + * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here. + * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue + * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while + * the workqueue task takes care of processing associated with the old blit. + */ +static void +via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; + int cur; + int done_transfer; + unsigned long irqsave = 0; + uint32_t status = 0; + + DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n", + engine, from_irq, (unsigned long) blitq); + + if (from_irq) + spin_lock(&blitq->blit_lock); + else + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + done_transfer = blitq->is_active && + ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); + done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE)); + + cur = blitq->cur; + if (done_transfer) { + + blitq->blits[cur]->aborted = blitq->aborting; + blitq->done_blit_handle++; + wake_up(blitq->blit_queue + cur); + + cur++; + if (cur >= VIA_NUM_BLIT_SLOTS) + cur = 0; + blitq->cur = cur; + + /* + * Clear transfer done flag. + */ + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD); + + blitq->is_active = 0; + blitq->aborting = 0; + schedule_work(&blitq->wq); + + } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { + + /* + * Abort transfer after one second. + */ + + via_abort_dmablit(dev, engine); + blitq->aborting = 1; + blitq->end = jiffies + HZ; + } + + if (!blitq->is_active) { + if (blitq->num_outstanding) { + via_fire_dmablit(dev, blitq->blits[cur], engine); + blitq->is_active = 1; + blitq->cur = cur; + blitq->num_outstanding--; + blitq->end = jiffies + HZ; + if (!timer_pending(&blitq->poll_timer)) + mod_timer(&blitq->poll_timer, jiffies + 1); + } else { + if (timer_pending(&blitq->poll_timer)) + del_timer(&blitq->poll_timer); + via_dmablit_engine_off(dev, engine); + } + } + + if (from_irq) + spin_unlock(&blitq->blit_lock); + else + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); +} + +/* + * Check whether this blit is still active, performing necessary locking. + */ +static int +via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue) +{ + unsigned long irqsave; + uint32_t slot; + int active; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + /* + * Allow for handle wraparounds. + */ + + active = ((blitq->done_blit_handle - handle) > (1 << 23)) && + ((blitq->cur_blit_handle - handle) <= (1 << 23)); + + if (queue && active) { + slot = handle - blitq->done_blit_handle + blitq->cur - 1; + if (slot >= VIA_NUM_BLIT_SLOTS) + slot -= VIA_NUM_BLIT_SLOTS; + *queue = blitq->blit_queue + slot; + } + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + return active; +} + +/* + * Sync. Wait for at least three seconds for the blit to be performed. + */ +static int +via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) +{ + + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; + wait_queue_head_t *queue; + int ret = 0; + + if (via_dmablit_active(blitq, engine, handle, &queue)) { + VIA_WAIT_ON(ret, *queue, 3 * HZ, + !via_dmablit_active(blitq, engine, handle, NULL)); + } + DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", + handle, engine, ret); + + return ret; +} + +/* + * A timer that regularly polls the blit engine in cases where we don't have interrupts: + * a) Broken hardware (typically those that don't have any video capture facility). + * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted. + * The timer and hardware IRQ's can and do work in parallel. If the hardware has + * irqs, it will shorten the latency somewhat. + */ +static void +via_dmablit_timer(struct timer_list *t) +{ + drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer); + struct drm_device *dev = blitq->dev; + int engine = (int) + (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); + + DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, + (unsigned long) jiffies); + + via_dmablit_handler(dev, engine, 0); + + if (!timer_pending(&blitq->poll_timer)) { + mod_timer(&blitq->poll_timer, jiffies + 1); + + /* + * Rerun handler to delete timer if engines are off, and + * to shorten abort latency. This is a little nasty. + */ + + via_dmablit_handler(dev, engine, 0); + + } +} + +/* + * Workqueue task that frees data and mappings associated with a blit. + * Also wakes up waiting processes. Each of these tasks handles one + * blit engine only and may not be called on each interrupt. + */ +static void +via_dmablit_workqueue(struct work_struct *work) +{ + drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); + struct drm_device *dev = blitq->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned long irqsave; + drm_via_sg_info_t *cur_sg; + int cur_released; + + + DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long) + (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + while (blitq->serviced != blitq->cur) { + + cur_released = blitq->serviced++; + + DRM_DEBUG("Releasing blit slot %d\n", cur_released); + + if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) + blitq->serviced = 0; + + cur_sg = blitq->blits[cur_released]; + blitq->num_free++; + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + wake_up(&blitq->busy_queue); + + via_free_sg_info(pdev, cur_sg); + kfree(cur_sg); + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + } + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); +} + +/* + * Init all blit engines. Currently we use two, but some hardware have 4. + */ +static void +via_init_dmablit(struct drm_device *dev) +{ + int i, j; + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + struct pci_dev *pdev = to_pci_dev(dev->dev); + drm_via_blitq_t *blitq; + + pci_set_master(pdev); + + for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) { + blitq = dev_priv->blit_queues + i; + blitq->dev = dev; + blitq->cur_blit_handle = 0; + blitq->done_blit_handle = 0; + blitq->head = 0; + blitq->cur = 0; + blitq->serviced = 0; + blitq->num_free = VIA_NUM_BLIT_SLOTS - 1; + blitq->num_outstanding = 0; + blitq->is_active = 0; + blitq->aborting = 0; + spin_lock_init(&blitq->blit_lock); + for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j) + init_waitqueue_head(blitq->blit_queue + j); + init_waitqueue_head(&blitq->busy_queue); + INIT_WORK(&blitq->wq, via_dmablit_workqueue); + timer_setup(&blitq->poll_timer, via_dmablit_timer, 0); + } +} + +/* + * Build all info and do all mappings required for a blit. + */ +static int +via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + int draw = xfer->to_fb; + int ret = 0; + + vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + vsg->bounce_buffer = NULL; + + vsg->state = dr_via_sg_init; + + if (xfer->num_lines <= 0 || xfer->line_length <= 0) { + DRM_ERROR("Zero size bitblt.\n"); + return -EINVAL; + } + + /* + * Below check is a driver limitation, not a hardware one. We + * don't want to lock unused pages, and don't want to incoporate the + * extra logic of avoiding them. Make sure there are no. + * (Not a big limitation anyway.) + */ + + if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { + DRM_ERROR("Too large system memory stride. Stride: %d, " + "Length: %d\n", xfer->mem_stride, xfer->line_length); + return -EINVAL; + } + + if ((xfer->mem_stride == xfer->line_length) && + (xfer->fb_stride == xfer->line_length)) { + xfer->mem_stride *= xfer->num_lines; + xfer->line_length = xfer->mem_stride; + xfer->fb_stride = xfer->mem_stride; + xfer->num_lines = 1; + } + + /* + * Don't lock an arbitrary large number of pages, since that causes a + * DOS security hole. + */ + + if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { + DRM_ERROR("Too large PCI DMA bitblt.\n"); + return -EINVAL; + } + + /* + * we allow a negative fb stride to allow flipping of images in + * transfer. + */ + + if (xfer->mem_stride < xfer->line_length || + abs(xfer->fb_stride) < xfer->line_length) { + DRM_ERROR("Invalid frame-buffer / memory stride.\n"); + return -EINVAL; + } + + /* + * A hardware bug seems to be worked around if system memory addresses start on + * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted + * about this. Meanwhile, impose the following restrictions: + */ + +#ifdef VIA_BUGFREE + if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) || + ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) { + DRM_ERROR("Invalid DRM bitblt alignment.\n"); + return -EINVAL; + } +#else + if ((((unsigned long)xfer->mem_addr & 15) || + ((unsigned long)xfer->fb_addr & 3)) || + ((xfer->num_lines > 1) && + ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { + DRM_ERROR("Invalid DRM bitblt alignment.\n"); + return -EINVAL; + } +#endif + + if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { + DRM_ERROR("Could not lock DMA pages.\n"); + via_free_sg_info(pdev, vsg); + return ret; + } + + via_map_blit_for_device(pdev, xfer, vsg, 0); + if (0 != (ret = via_alloc_desc_pages(vsg))) { + DRM_ERROR("Could not allocate DMA descriptor pages.\n"); + via_free_sg_info(pdev, vsg); + return ret; + } + via_map_blit_for_device(pdev, xfer, vsg, 1); + + return 0; +} + +/* + * Reserve one free slot in the blit queue. Will wait for one second for one + * to become available. Otherwise -EBUSY is returned. + */ +static int +via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) +{ + int ret = 0; + unsigned long irqsave; + + DRM_DEBUG("Num free is %d\n", blitq->num_free); + spin_lock_irqsave(&blitq->blit_lock, irqsave); + while (blitq->num_free == 0) { + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0); + if (ret) + return (-EINTR == ret) ? -EAGAIN : ret; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + } + + blitq->num_free--; + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + return 0; +} + +/* + * Hand back a free slot if we changed our mind. + */ +static void +via_dmablit_release_slot(drm_via_blitq_t *blitq) +{ + unsigned long irqsave; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + blitq->num_free++; + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + wake_up(&blitq->busy_queue); +} + +/* + * Grab a free slot. Build blit info and queue a blit. + */ +static int +via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_sg_info_t *vsg; + drm_via_blitq_t *blitq; + int ret; + int engine; + unsigned long irqsave; + + if (dev_priv == NULL) { + DRM_ERROR("Called without initialization.\n"); + return -EINVAL; + } + + engine = (xfer->to_fb) ? 0 : 1; + blitq = dev_priv->blit_queues + engine; + if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) + return ret; + if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) { + via_dmablit_release_slot(blitq); + return -ENOMEM; + } + if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) { + via_dmablit_release_slot(blitq); + kfree(vsg); + return ret; + } + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + blitq->blits[blitq->head++] = vsg; + if (blitq->head >= VIA_NUM_BLIT_SLOTS) + blitq->head = 0; + blitq->num_outstanding++; + xfer->sync.sync_handle = ++blitq->cur_blit_handle; + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + xfer->sync.engine = engine; + + via_dmablit_handler(dev, engine, 0); + + return 0; +} + +/* + * Sync on a previously submitted blit. Note that the X server use signals extensively, and + * that there is a very big probability that this IOCTL will be interrupted by a signal. In that + * case it returns with -EAGAIN for the signal to be delivered. + * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). + */ +static int +via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_blitsync_t *sync = data; + int err; + + if (sync->engine >= VIA_NUM_BLIT_ENGINES) + return -EINVAL; + + err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); + + if (-EINTR == err) + err = -EAGAIN; + + return err; +} + +/* + * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal + * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should + * be reissued. See the above IOCTL code. + */ +static int +via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_dmablit_t *xfer = data; + int err; + + err = via_dmablit(dev, xfer); + + return err; +} + static u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe) { drm_via_private_t *dev_priv = dev->dev_private; diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h index a1bbe3d5247e..6b26decfadb8 100644 --- a/drivers/gpu/drm/via/via_drv.h +++ b/drivers/gpu/drm/via/via_drv.h @@ -24,6 +24,7 @@ #ifndef _VIA_DRV_H_ #define _VIA_DRV_H_ +#include <linux/dma-mapping.h> #include <linux/irqreturn.h> #include <linux/jiffies.h> #include <linux/sched.h> @@ -47,12 +48,57 @@ #include "via_verifier.h" -#include "via_dmablit.h" - #define VIA_PCI_BUF_SIZE 60000 #define VIA_FIRE_BUF_SIZE 1024 #define VIA_NUM_IRQS 4 + +#define VIA_NUM_BLIT_ENGINES 2 +#define VIA_NUM_BLIT_SLOTS 8 + +struct _drm_via_descriptor; + +typedef struct _drm_via_sg_info { + struct page **pages; + unsigned long num_pages; + struct _drm_via_descriptor **desc_pages; + int num_desc_pages; + int num_desc; + enum dma_data_direction direction; + unsigned char *bounce_buffer; + dma_addr_t chain_start; + uint32_t free_on_sequence; + unsigned int descriptors_per_page; + int aborted; + enum { + dr_via_device_mapped, + dr_via_desc_pages_alloc, + dr_via_pages_locked, + dr_via_pages_alloc, + dr_via_sg_init + } state; +} drm_via_sg_info_t; + +typedef struct _drm_via_blitq { + struct drm_device *dev; + uint32_t cur_blit_handle; + uint32_t done_blit_handle; + unsigned serviced; + unsigned head; + unsigned cur; + unsigned num_free; + unsigned num_outstanding; + unsigned long end; + int aborting; + int is_active; + drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS]; + spinlock_t blit_lock; + wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS]; + wait_queue_head_t busy_queue; + struct work_struct wq; + struct timer_list poll_timer; +} drm_via_blitq_t; + typedef struct drm_via_ring_buffer { drm_local_map_t map; char *virtual_start; @@ -183,9 +229,6 @@ do { \ remove_wait_queue(&(queue), &entry); \ } while (0) -extern int via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv); - extern int via_init_context(struct drm_device *dev, int context); extern int via_do_cleanup_map(struct drm_device *dev); @@ -194,7 +237,4 @@ extern int via_dma_cleanup(struct drm_device *dev); extern void via_init_command_verifier(void); extern int via_driver_dma_quiescent(struct drm_device *dev); -extern void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq); -extern void via_init_dmablit(struct drm_device *dev); - #endif |