diff options
Diffstat (limited to 'drivers/gpu/drm/mxsfb')
| -rw-r--r-- | drivers/gpu/drm/mxsfb/mxsfb_kms.c | 36 |
1 files changed, 20 insertions, 16 deletions
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c b/drivers/gpu/drm/mxsfb/mxsfb_kms.c index 4cfb6c001679..45cabe096076 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c @@ -191,6 +191,12 @@ static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb) { int ret; + /* + * It seems, you can't re-program the controller if it is still + * running. This may lead to shifted pictures (FIFO issue?), so + * first stop the controller and drain its FIFOs. + */ + ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_SFTRST); if (ret) return ret; @@ -201,7 +207,20 @@ static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb) if (ret) return ret; - return clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE); + ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE); + if (ret) + return ret; + + /* Clear the FIFOs */ + writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET); + readl(mxsfb->base + LCDC_CTRL1); + writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_CLR); + readl(mxsfb->base + LCDC_CTRL1); + + if (mxsfb->devdata->has_overlay) + writel(0, mxsfb->base + LCDC_AS_CTRL); + + return 0; } static dma_addr_t mxsfb_get_fb_paddr(struct drm_plane *plane) @@ -228,26 +247,11 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb, u32 vdctrl0, vsync_pulse_len, hsync_pulse_len; int err; - /* - * It seems, you can't re-program the controller if it is still - * running. This may lead to shifted pictures (FIFO issue?), so - * first stop the controller and drain its FIFOs. - */ - /* Mandatory eLCDIF reset as per the Reference Manual */ err = mxsfb_reset_block(mxsfb); if (err) return; - /* Clear the FIFOs */ - writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET); - readl(mxsfb->base + LCDC_CTRL1); - writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_CLR); - readl(mxsfb->base + LCDC_CTRL1); - - if (mxsfb->devdata->has_overlay) - writel(0, mxsfb->base + LCDC_AS_CTRL); - mxsfb_set_formats(mxsfb, bus_format); clk_set_rate(mxsfb->clk, m->crtc_clock * 1000); |