diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 784 |
1 files changed, 593 insertions, 191 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b35fd1db8c..37514a52b05c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -24,6 +24,7 @@ * Eric Anholt <eric@anholt.net> */ +#include <linux/dmi.h> #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/input.h> @@ -360,6 +361,110 @@ static const intel_limit_t intel_limits_ironlake_display_port = { .find_pll = intel_find_pll_ironlake_dp, }; +u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg) +{ + unsigned long flags; + u32 val = 0; + + spin_lock_irqsave(&dev_priv->dpio_lock, flags); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO idle wait timed out\n"); + goto out_unlock; + } + + I915_WRITE(DPIO_REG, reg); + I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID | + DPIO_BYTE); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO read wait timed out\n"); + goto out_unlock; + } + val = I915_READ(DPIO_DATA); + +out_unlock: + spin_unlock_irqrestore(&dev_priv->dpio_lock, flags); + return val; +} + +static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, + u32 val) +{ + unsigned long flags; + + spin_lock_irqsave(&dev_priv->dpio_lock, flags); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO idle wait timed out\n"); + goto out_unlock; + } + + I915_WRITE(DPIO_DATA, val); + I915_WRITE(DPIO_REG, reg); + I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID | + DPIO_BYTE); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) + DRM_ERROR("DPIO write wait timed out\n"); + +out_unlock: + spin_unlock_irqrestore(&dev_priv->dpio_lock, flags); +} + +static void vlv_init_dpio(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Reset the DPIO config */ + I915_WRITE(DPIO_CTL, 0); + POSTING_READ(DPIO_CTL); + I915_WRITE(DPIO_CTL, 1); + POSTING_READ(DPIO_CTL); +} + +static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) +{ + DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_dual_link_lvds[] = { + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro (Core i5/i7 Series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), + }, + }, + { } /* terminating entry */ +}; + +static bool is_dual_link_lvds(struct drm_i915_private *dev_priv, + unsigned int reg) +{ + unsigned int val; + + /* use the module option value if specified */ + if (i915_lvds_channel_mode > 0) + return i915_lvds_channel_mode == 2; + + if (dmi_check_system(intel_dual_link_lvds)) + return true; + + if (dev_priv->lvds_val) + val = dev_priv->lvds_val; + else { + /* BIOS should set the proper LVDS register value at boot, but + * in reality, it doesn't set the value when the lid is closed; + * we need to check "the value to be set" in VBT when LVDS + * register is uninitialized. + */ + val = I915_READ(reg); + if (!(val & ~LVDS_DETECTED)) + val = dev_priv->bios_lvds_val; + dev_priv->lvds_val = val; + } + return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP; +} + static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, int refclk) { @@ -368,8 +473,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) { + if (is_dual_link_lvds(dev_priv, PCH_LVDS)) { /* LVDS dual channel */ if (refclk == 100000) limit = &intel_limits_ironlake_dual_lvds_100m; @@ -397,8 +501,7 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) + if (is_dual_link_lvds(dev_priv, LVDS)) /* LVDS with dual channel */ limit = &intel_limits_g4x_dual_channel_lvds; else @@ -536,8 +639,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, * reliably set up different single/dual channel state, if we * even can. */ - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) + if (is_dual_link_lvds(dev_priv, LVDS)) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; @@ -2537,7 +2639,7 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - u32 reg, temp, i; + u32 reg, temp, i, retry; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ @@ -2589,15 +2691,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) POSTING_READ(reg); udelay(500); - reg = FDI_RX_IIR(pipe); - temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - - if (temp & FDI_RX_BIT_LOCK) { - I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); - DRM_DEBUG_KMS("FDI train 1 done.\n"); - break; + for (retry = 0; retry < 5; retry++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_BIT_LOCK) { + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); + DRM_DEBUG_KMS("FDI train 1 done.\n"); + break; + } + udelay(50); } + if (retry < 5) + break; } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); @@ -2638,15 +2744,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) POSTING_READ(reg); udelay(500); - reg = FDI_RX_IIR(pipe); - temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - - if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); - DRM_DEBUG_KMS("FDI train 2 done.\n"); - break; + for (retry = 0; retry < 5; retry++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_SYMBOL_LOCK) { + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG_KMS("FDI train 2 done.\n"); + break; + } + udelay(50); } + if (retry < 5) + break; } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); @@ -3457,6 +3567,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, return true; } +static int valleyview_get_display_clock_speed(struct drm_device *dev) +{ + return 400000; /* FIXME */ +} + static int i945_get_display_clock_speed(struct drm_device *dev) { return 400000; @@ -3606,6 +3721,20 @@ static const struct intel_watermark_params g4x_cursor_wm_info = { 2, G4X_FIFO_LINE_SIZE, }; +static const struct intel_watermark_params valleyview_wm_info = { + VALLEYVIEW_FIFO_SIZE, + VALLEYVIEW_MAX_WM, + VALLEYVIEW_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params valleyview_cursor_wm_info = { + I965_CURSOR_FIFO, + VALLEYVIEW_CURSOR_MAX_WM, + I965_CURSOR_DFT_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static const struct intel_watermark_params i965_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, @@ -4128,8 +4257,134 @@ static bool g4x_compute_srwm(struct drm_device *dev, display, cursor); } +static bool vlv_compute_drain_latency(struct drm_device *dev, + int plane, + int *plane_prec_mult, + int *plane_dl, + int *cursor_prec_mult, + int *cursor_dl) +{ + struct drm_crtc *crtc; + int clock, pixel_size; + int entries; + + crtc = intel_get_crtc_for_plane(dev, plane); + if (crtc->fb == NULL || !crtc->enabled) + return false; + + clock = crtc->mode.clock; /* VESA DOT Clock */ + pixel_size = crtc->fb->bits_per_pixel / 8; /* BPP */ + + entries = (clock / 1000) * pixel_size; + *plane_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) * + pixel_size); + + entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */ + *cursor_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4); + + return true; +} + +/* + * Update drain latency registers of memory arbiter + * + * Valleyview SoC has a new memory arbiter and needs drain latency registers + * to be programmed. Each plane has a drain latency multiplier and a drain + * latency value. + */ + +static void vlv_update_drain_latency(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_prec, planea_dl, planeb_prec, planeb_dl; + int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl; + int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is + either 16 or 32 */ + + /* For plane A, Cursor A */ + if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl, + &cursor_prec_mult, &cursora_dl)) { + cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16; + planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16; + + I915_WRITE(VLV_DDL1, cursora_prec | + (cursora_dl << DDL_CURSORA_SHIFT) | + planea_prec | planea_dl); + } + + /* For plane B, Cursor B */ + if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl, + &cursor_prec_mult, &cursorb_dl)) { + cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16; + planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16; + + I915_WRITE(VLV_DDL2, cursorb_prec | + (cursorb_dl << DDL_CURSORB_SHIFT) | + planeb_prec | planeb_dl); + } +} + #define single_plane_enabled(mask) is_power_of_2(mask) +static void valleyview_update_wm(struct drm_device *dev) +{ + static const int sr_latency_ns = 12000; + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm; + int plane_sr, cursor_sr; + unsigned int enabled = 0; + + vlv_update_drain_latency(dev); + + if (g4x_compute_wm0(dev, 0, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planea_wm, &cursora_wm)) + enabled |= 1; + + if (g4x_compute_wm0(dev, 1, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planeb_wm, &cursorb_wm)) + enabled |= 2; + + plane_sr = cursor_sr = 0; + if (single_plane_enabled(enabled) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + sr_latency_ns, + &valleyview_wm_info, + &valleyview_cursor_wm_info, + &plane_sr, &cursor_sr)) + I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN); + else + I915_WRITE(FW_BLC_SELF_VLV, + I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN); + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", + planea_wm, cursora_wm, + planeb_wm, cursorb_wm, + plane_sr, cursor_sr); + + I915_WRITE(DSPFW1, + (plane_sr << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | + planea_wm); + I915_WRITE(DSPFW2, + (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + I915_WRITE(DSPFW3, + (I915_READ(DSPFW3) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT))); +} + static void g4x_update_wm(struct drm_device *dev) { static const int sr_latency_ns = 12000; @@ -5113,6 +5368,233 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc, } } +static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 temp, lvds_sync = 0; + + temp = I915_READ(LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock->p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + /* set the dithering flag on LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } + I915_WRITE(LVDS, temp); +} + +static void i9xx_update_pll(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + intel_clock_t *clock, intel_clock_t *reduced_clock, + int num_connectors) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll; + bool is_sdvo; + + is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI); + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + if (pixel_multiplier > 1) { + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + dpll |= DPLL_DVO_HIGH_SPEED; + } + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) + dpll |= DPLL_DVO_HIGH_SPEED; + + /* compute bitmask from p1 value */ + if (IS_PINEVIEW(dev)) + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; + else { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (IS_G4X(dev) && reduced_clock) + dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + } + switch (clock->p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (INTEL_INFO(dev)->gen >= 4) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + + if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + /* XXX: just matching BIOS for now */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv) && num_connectors < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); + POSTING_READ(DPLL(pipe)); + udelay(150); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + intel_update_lvds(crtc, clock, adjusted_mode); + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) + intel_dp_set_m_n(crtc, mode, adjusted_mode); + + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + + if (INTEL_INFO(dev)->gen >= 4) { + u32 temp = 0; + if (is_sdvo) { + temp = intel_mode_get_pixel_multiplier(adjusted_mode); + if (temp > 1) + temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + else + temp = 0; + } + I915_WRITE(DPLL_MD(pipe), temp); + } else { + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(DPLL(pipe), dpll); + } +} + +static void i8xx_update_pll(struct drm_crtc *crtc, + struct drm_display_mode *adjusted_mode, + intel_clock_t *clock, + int num_connectors) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll; + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock->p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock->p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + /* XXX: just matching BIOS for now */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv) && num_connectors < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); + POSTING_READ(DPLL(pipe)); + udelay(150); + + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + intel_update_lvds(crtc, clock, adjusted_mode); + + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(DPLL(pipe), dpll); +} + static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -5126,15 +5608,13 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, dspcntr, pipeconf, vsyncshift; - bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; + u32 dspcntr, pipeconf, vsyncshift; + bool ok, has_reduced_clock = false, is_sdvo = false; + bool is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; - u32 temp; - u32 lvds_sync = 0; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -5150,15 +5630,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, if (encoder->needs_tv_clock) is_tv = true; break; - case INTEL_OUTPUT_DVO: - is_dvo = true; - break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; @@ -5205,71 +5679,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ? &reduced_clock : NULL); - dpll = DPLL_VGA_MODE_DIS; - - if (!IS_GEN2(dev)) { - if (is_lvds) - dpll |= DPLLB_MODE_LVDS; - else - dpll |= DPLLB_MODE_DAC_SERIAL; - if (is_sdvo) { - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - if (pixel_multiplier > 1) { - if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) - dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - } - dpll |= DPLL_DVO_HIGH_SPEED; - } - if (is_dp) - dpll |= DPLL_DVO_HIGH_SPEED; - - /* compute bitmask from p1 value */ - if (IS_PINEVIEW(dev)) - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; - else { - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; - if (IS_G4X(dev) && has_reduced_clock) - dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; - } - switch (clock.p2) { - case 5: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; - break; - case 7: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; - break; - case 10: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; - break; - case 14: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; - break; - } - if (INTEL_INFO(dev)->gen >= 4) - dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); - } else { - if (is_lvds) { - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; - } else { - if (clock.p1 == 2) - dpll |= PLL_P1_DIVIDE_BY_TWO; - else - dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; - if (clock.p2 == 4) - dpll |= PLL_P2_DIVIDE_BY_4; - } - } - - if (is_sdvo && is_tv) - dpll |= PLL_REF_INPUT_TVCLKINBC; - else if (is_tv) - /* XXX: just matching BIOS for now */ - /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; - else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) - dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + if (IS_GEN2(dev)) + i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors); else - dpll |= PLL_REF_INPUT_DREFCLK; + i9xx_update_pll(crtc, mode, adjusted_mode, &clock, + has_reduced_clock ? &reduced_clock : NULL, + num_connectors); /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); @@ -5306,97 +5721,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, } } - dpll |= DPLL_VCO_ENABLE; - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); - I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); - - POSTING_READ(DPLL(pipe)); - udelay(150); - - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - temp = I915_READ(LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (pipe == 1) { - temp |= LVDS_PIPEB_SELECT; - } else { - temp &= ~LVDS_PIPEB_SELECT; - } - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - /* set the dithering flag on LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - lvds_sync |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - lvds_sync |= LVDS_VSYNC_POLARITY; - if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) - != lvds_sync) { - char flags[2] = "-+"; - DRM_INFO("Changing LVDS panel from " - "(%chsync, %cvsync) to (%chsync, %cvsync)\n", - flags[!(temp & LVDS_HSYNC_POLARITY)], - flags[!(temp & LVDS_VSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - temp |= lvds_sync; - } - I915_WRITE(LVDS, temp); - } - - if (is_dp) { - intel_dp_set_m_n(crtc, mode, adjusted_mode); - } - - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - - if (INTEL_INFO(dev)->gen >= 4) { - temp = 0; - if (is_sdvo) { - temp = intel_mode_get_pixel_multiplier(adjusted_mode); - if (temp > 1) - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; - else - temp = 0; - } - I915_WRITE(DPLL_MD(pipe), temp); - } else { - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(DPLL(pipe), dpll); - } - if (HAS_PIPE_CXSR(dev)) { if (intel_crtc->lowfreq_avail) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); @@ -7796,7 +8123,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(HDMIB) & PORT_DETECTED) { /* PCH SDVOB multiplex with HDMIB */ - found = intel_sdvo_init(dev, PCH_SDVOB); + found = intel_sdvo_init(dev, PCH_SDVOB, true); if (!found) intel_hdmi_init(dev, HDMIB); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) @@ -7820,7 +8147,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); - found = intel_sdvo_init(dev, SDVOB); + found = intel_sdvo_init(dev, SDVOB, true); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); @@ -7836,7 +8163,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOC\n"); - found = intel_sdvo_init(dev, SDVOC); + found = intel_sdvo_init(dev, SDVOC, false); } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { @@ -8617,6 +8944,54 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) } } +static void valleyview_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); + + /* According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating workaround. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + + I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); + + I915_WRITE(IVB_CHICKEN3, + CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | + CHICKEN3_DGMG_DONE_FIX_DISABLE); + + /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */ + I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, + GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); + + /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ + I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); + I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + + /* This is required by WaCatErrorRejectionIssue */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + + for_each_pipe(pipe) { + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); + intel_flush_display_plane(dev_priv, pipe); + } + + I915_WRITE(CACHE_MODE_1, I915_READ(CACHE_MODE_1) | + (PIXEL_SUBSPAN_COLLECT_OPT_DISABLE << 16) | + PIXEL_SUBSPAN_COLLECT_OPT_DISABLE); +} + static void g4x_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -8871,7 +9246,10 @@ static void intel_init_display(struct drm_device *dev) } /* Returns the core display clock speed */ - if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) + if (IS_VALLEYVIEW(dev)) + dev_priv->display.get_display_clock_speed = + valleyview_get_display_clock_speed; + else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; else if (IS_I915G(dev)) @@ -8966,6 +9344,12 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.write_eld = ironlake_write_eld; } else dev_priv->display.update_wm = NULL; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.update_wm = valleyview_update_wm; + dev_priv->display.init_clock_gating = + valleyview_init_clock_gating; + dev_priv->display.force_wake_get = vlv_force_wake_get; + dev_priv->display.force_wake_put = vlv_force_wake_put; } else if (IS_PINEVIEW(dev)) { if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, @@ -9049,7 +9433,7 @@ static void quirk_pipea_force(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_PIPEA_FORCE; - DRM_DEBUG_DRIVER("applying pipe a force quirk\n"); + DRM_INFO("applying pipe a force quirk\n"); } /* @@ -9059,6 +9443,18 @@ static void quirk_ssc_force_disable(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; + DRM_INFO("applying lvds SSC disable quirk\n"); +} + +/* + * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight + * brightness value + */ +static void quirk_invert_brightness(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS; + DRM_INFO("applying inverted panel brightness quirk\n"); } struct intel_quirk { @@ -9093,6 +9489,9 @@ struct intel_quirk intel_quirks[] = { /* Sony Vaio Y cannot use SSC on LVDS */ { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable }, + + /* Acer Aspire 5734Z must invert backlight brightness */ + { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness }, }; static void intel_init_quirks(struct drm_device *dev) @@ -9236,6 +9635,9 @@ void intel_modeset_cleanup(struct drm_device *dev) if (IS_IRONLAKE_M(dev)) ironlake_disable_rc6(dev); + if (IS_VALLEYVIEW(dev)) + vlv_init_dpio(dev); + mutex_unlock(&dev->struct_mutex); /* Disable the irq before mode object teardown, for the irq might |