summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_dp_cec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/drm_dp_cec.c')
-rw-r--r--drivers/gpu/drm/drm_dp_cec.c18
1 files changed, 17 insertions, 1 deletions
diff --git a/drivers/gpu/drm/drm_dp_cec.c b/drivers/gpu/drm/drm_dp_cec.c
index 988513346e9c..8a718f85079a 100644
--- a/drivers/gpu/drm/drm_dp_cec.c
+++ b/drivers/gpu/drm/drm_dp_cec.c
@@ -16,7 +16,9 @@
* here. Quite a few active (mini-)DP-to-HDMI or USB-C-to-HDMI adapters
* have a converter chip that supports CEC-Tunneling-over-AUX (usually the
* Parade PS176), but they do not wire up the CEC pin, thus making CEC
- * useless.
+ * useless. Note that MegaChips 2900-based adapters appear to have good
+ * support for CEC tunneling. Those adapters that I have tested using
+ * this chipset all have the CEC line connected.
*
* Sadly there is no way for this driver to know this. What happens is
* that a /dev/cecX device is created that is isolated and unable to see
@@ -238,6 +240,10 @@ void drm_dp_cec_irq(struct drm_dp_aux *aux)
u8 cec_irq;
int ret;
+ /* No transfer function was set, so not a DP connector */
+ if (!aux->transfer)
+ return;
+
mutex_lock(&aux->cec.lock);
if (!aux->cec.adap)
goto unlock;
@@ -293,6 +299,10 @@ void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
unsigned int num_las = 1;
u8 cap;
+ /* No transfer function was set, so not a DP connector */
+ if (!aux->transfer)
+ return;
+
#ifndef CONFIG_MEDIA_CEC_RC
/*
* CEC_CAP_RC is part of CEC_CAP_DEFAULTS, but it is stripped by
@@ -361,6 +371,10 @@ EXPORT_SYMBOL(drm_dp_cec_set_edid);
*/
void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
{
+ /* No transfer function was set, so not a DP connector */
+ if (!aux->transfer)
+ return;
+
cancel_delayed_work_sync(&aux->cec.unregister_work);
mutex_lock(&aux->cec.lock);
@@ -404,6 +418,8 @@ void drm_dp_cec_register_connector(struct drm_dp_aux *aux, const char *name,
struct device *parent)
{
WARN_ON(aux->cec.adap);
+ if (WARN_ON(!aux->transfer))
+ return;
aux->cec.name = name;
aux->cec.parent = parent;
INIT_DELAYED_WORK(&aux->cec.unregister_work,