diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/ti-sn65dsi86.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/ti-sn65dsi86.c | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 09d3c65fa2ba..6e053e2af229 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -92,6 +92,8 @@ #define SN_DATARATE_CONFIG_REG 0x94 #define DP_DATARATE_MASK GENMASK(7, 5) #define DP_DATARATE(x) ((x) << 5) +#define SN_TRAINING_SETTING_REG 0x95 +#define SCRAMBLE_DISABLE BIT(4) #define SN_ML_TX_MODE_REG 0x96 #define ML_TX_MAIN_LINK_OFF 0 #define ML_TX_NORMAL_MODE BIT(0) @@ -1070,12 +1072,23 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, /* * The SN65DSI86 only supports ASSR Display Authentication method and - * this method is enabled by default. An eDP panel must support this + * this method is enabled for eDP panels. An eDP panel must support this * authentication method. We need to enable this method in the eDP panel * at DisplayPort address 0x0010A prior to link training. + * + * As only ASSR is supported by SN65DSI86, for full DisplayPort displays + * we need to disable the scrambler. */ - drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, - DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + if (pdata->bridge.type == DRM_MODE_CONNECTOR_eDP) { + drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, + DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, 0); + } else { + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, SCRAMBLE_DISABLE); + } bpp = ti_sn_bridge_get_bpp(connector); /* Set the DP output format (18 bpp or 24 bpp) */ @@ -1241,6 +1254,8 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev, pdata->bridge.funcs = &ti_sn_bridge_funcs; pdata->bridge.of_node = np; + pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort + ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP; drm_bridge_add(&pdata->bridge); |