summaryrefslogtreecommitdiffstats
path: root/drivers/dma/edma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/edma.c')
-rw-r--r--drivers/dma/edma.c63
1 files changed, 25 insertions, 38 deletions
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index ee3463e774f8..04070baab78a 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1238,6 +1238,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
struct edma_desc *edesc;
dma_addr_t src_addr, dst_addr;
enum dma_slave_buswidth dev_width;
+ bool use_intermediate = false;
u32 burst;
int i, ret, nslots;
@@ -1279,8 +1280,21 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
* but the synchronization is difficult to achieve with Cyclic and
* cannot be guaranteed, so we error out early.
*/
- if (nslots > MAX_NR_SG)
- return NULL;
+ if (nslots > MAX_NR_SG) {
+ /*
+ * If the burst and period sizes are the same, we can put
+ * the full buffer into a single period and activate
+ * intermediate interrupts. This will produce interrupts
+ * after each burst, which is also after each desired period.
+ */
+ if (burst == period_len) {
+ period_len = buf_len;
+ nslots = 2;
+ use_intermediate = true;
+ } else {
+ return NULL;
+ }
+ }
edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
GFP_ATOMIC);
@@ -1358,8 +1372,13 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
/*
* Enable period interrupt only if it is requested
*/
- if (tx_flags & DMA_PREP_INTERRUPT)
+ if (tx_flags & DMA_PREP_INTERRUPT) {
edesc->pset[i].param.opt |= TCINTEN;
+
+ /* Also enable intermediate interrupts if necessary */
+ if (use_intermediate)
+ edesc->pset[i].param.opt |= ITCINTEN;
+ }
}
/* Place the cyclic channel to highest priority queue */
@@ -1570,32 +1589,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static void edma_tc_set_pm_state(struct edma_tc *tc, bool enable)
-{
- struct platform_device *tc_pdev;
- int ret;
-
- if (!IS_ENABLED(CONFIG_OF) || !tc)
- return;
-
- tc_pdev = of_find_device_by_node(tc->node);
- if (!tc_pdev) {
- pr_err("%s: TPTC device is not found\n", __func__);
- return;
- }
- if (!pm_runtime_enabled(&tc_pdev->dev))
- pm_runtime_enable(&tc_pdev->dev);
-
- if (enable)
- ret = pm_runtime_get_sync(&tc_pdev->dev);
- else
- ret = pm_runtime_put_sync(&tc_pdev->dev);
-
- if (ret < 0)
- pr_err("%s: pm_runtime_%s_sync() failed for %s\n", __func__,
- enable ? "get" : "put", dev_name(&tc_pdev->dev));
-}
-
/* Alloc channel resources */
static int edma_alloc_chan_resources(struct dma_chan *chan)
{
@@ -1632,8 +1625,6 @@ static int edma_alloc_chan_resources(struct dma_chan *chan)
EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
echan->hw_triggered ? "HW" : "SW");
- edma_tc_set_pm_state(echan->tc, true);
-
return 0;
err_slot:
@@ -1670,7 +1661,6 @@ static void edma_free_chan_resources(struct dma_chan *chan)
echan->alloced = false;
}
- edma_tc_set_pm_state(echan->tc, false);
echan->tc = NULL;
echan->hw_triggered = false;
@@ -2417,10 +2407,8 @@ static int edma_pm_suspend(struct device *dev)
int i;
for (i = 0; i < ecc->num_channels; i++) {
- if (echan[i].alloced) {
+ if (echan[i].alloced)
edma_setup_interrupt(&echan[i], false);
- edma_tc_set_pm_state(echan[i].tc, false);
- }
}
return 0;
@@ -2450,8 +2438,6 @@ static int edma_pm_resume(struct device *dev)
/* Set up channel -> slot mapping for the entry slot */
edma_set_chmap(&echan[i], echan[i].slot[0]);
-
- edma_tc_set_pm_state(echan[i].tc, true);
}
}
@@ -2475,7 +2461,8 @@ static struct platform_driver edma_driver = {
static int edma_tptc_probe(struct platform_device *pdev)
{
- return 0;
+ pm_runtime_enable(&pdev->dev);
+ return pm_runtime_get_sync(&pdev->dev);
}
static struct platform_driver edma_tptc_driver = {