summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/s5p-sss.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/s5p-sss.c')
-rw-r--r--drivers/crypto/s5p-sss.c132
1 files changed, 85 insertions, 47 deletions
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index dce1af0ce85c..1b9da3dc799b 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -270,7 +270,7 @@ static void s5p_sg_copy_buf(void *buf, struct scatterlist *sg,
scatterwalk_done(&walk, out, 0);
}
-static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+static void s5p_sg_done(struct s5p_aes_dev *dev)
{
if (dev->sg_dst_cpy) {
dev_dbg(dev->dev,
@@ -281,8 +281,11 @@ static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
}
s5p_free_sg_cpy(dev, &dev->sg_src_cpy);
s5p_free_sg_cpy(dev, &dev->sg_dst_cpy);
+}
- /* holding a lock outside */
+/* Calls the completion. Cannot be called with dev->lock hold. */
+static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+{
dev->req->base.complete(&dev->req->base, err);
dev->busy = false;
}
@@ -368,51 +371,44 @@ exit:
}
/*
- * Returns true if new transmitting (output) data is ready and its
- * address+length have to be written to device (by calling
- * s5p_set_dma_outdata()). False otherwise.
+ * Returns -ERRNO on error (mapping of new data failed).
+ * On success returns:
+ * - 0 if there is no more data,
+ * - 1 if new transmitting (output) data is ready and its address+length
+ * have to be written to device (by calling s5p_set_dma_outdata()).
*/
-static bool s5p_aes_tx(struct s5p_aes_dev *dev)
+static int s5p_aes_tx(struct s5p_aes_dev *dev)
{
- int err = 0;
- bool ret = false;
+ int ret = 0;
s5p_unset_outdata(dev);
if (!sg_is_last(dev->sg_dst)) {
- err = s5p_set_outdata(dev, sg_next(dev->sg_dst));
- if (err)
- s5p_aes_complete(dev, err);
- else
- ret = true;
- } else {
- s5p_aes_complete(dev, err);
-
- dev->busy = true;
- tasklet_schedule(&dev->tasklet);
+ ret = s5p_set_outdata(dev, sg_next(dev->sg_dst));
+ if (!ret)
+ ret = 1;
}
return ret;
}
/*
- * Returns true if new receiving (input) data is ready and its
- * address+length have to be written to device (by calling
- * s5p_set_dma_indata()). False otherwise.
+ * Returns -ERRNO on error (mapping of new data failed).
+ * On success returns:
+ * - 0 if there is no more data,
+ * - 1 if new receiving (input) data is ready and its address+length
+ * have to be written to device (by calling s5p_set_dma_indata()).
*/
-static bool s5p_aes_rx(struct s5p_aes_dev *dev)
+static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/)
{
- int err;
- bool ret = false;
+ int ret = 0;
s5p_unset_indata(dev);
if (!sg_is_last(dev->sg_src)) {
- err = s5p_set_indata(dev, sg_next(dev->sg_src));
- if (err)
- s5p_aes_complete(dev, err);
- else
- ret = true;
+ ret = s5p_set_indata(dev, sg_next(dev->sg_src));
+ if (!ret)
+ ret = 1;
}
return ret;
@@ -422,33 +418,73 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
- bool set_dma_tx = false;
- bool set_dma_rx = false;
+ int err_dma_tx = 0;
+ int err_dma_rx = 0;
+ bool tx_end = false;
unsigned long flags;
uint32_t status;
+ int err;
spin_lock_irqsave(&dev->lock, flags);
+ /*
+ * Handle rx or tx interrupt. If there is still data (scatterlist did not
+ * reach end), then map next scatterlist entry.
+ * In case of such mapping error, s5p_aes_complete() should be called.
+ *
+ * If there is no more data in tx scatter list, call s5p_aes_complete()
+ * and schedule new tasklet.
+ */
status = SSS_READ(dev, FCINTSTAT);
if (status & SSS_FCINTSTAT_BRDMAINT)
- set_dma_rx = s5p_aes_rx(dev);
- if (status & SSS_FCINTSTAT_BTDMAINT)
- set_dma_tx = s5p_aes_tx(dev);
+ err_dma_rx = s5p_aes_rx(dev);
+
+ if (status & SSS_FCINTSTAT_BTDMAINT) {
+ if (sg_is_last(dev->sg_dst))
+ tx_end = true;
+ err_dma_tx = s5p_aes_tx(dev);
+ }
SSS_WRITE(dev, FCINTPEND, status);
- /*
- * Writing length of DMA block (either receiving or transmitting)
- * will start the operation immediately, so this should be done
- * at the end (even after clearing pending interrupts to not miss the
- * interrupt).
- */
- if (set_dma_tx)
- s5p_set_dma_outdata(dev, dev->sg_dst);
- if (set_dma_rx)
- s5p_set_dma_indata(dev, dev->sg_src);
+ if (err_dma_rx < 0) {
+ err = err_dma_rx;
+ goto error;
+ }
+ if (err_dma_tx < 0) {
+ err = err_dma_tx;
+ goto error;
+ }
+
+ if (tx_end) {
+ s5p_sg_done(dev);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ s5p_aes_complete(dev, 0);
+ dev->busy = true;
+ tasklet_schedule(&dev->tasklet);
+ } else {
+ /*
+ * Writing length of DMA block (either receiving or
+ * transmitting) will start the operation immediately, so this
+ * should be done at the end (even after clearing pending
+ * interrupts to not miss the interrupt).
+ */
+ if (err_dma_tx == 1)
+ s5p_set_dma_outdata(dev, dev->sg_dst);
+ if (err_dma_rx == 1)
+ s5p_set_dma_indata(dev, dev->sg_src);
+ spin_unlock_irqrestore(&dev->lock, flags);
+ }
+
+ return IRQ_HANDLED;
+
+error:
+ s5p_sg_done(dev);
spin_unlock_irqrestore(&dev->lock, flags);
+ s5p_aes_complete(dev, err);
return IRQ_HANDLED;
}
@@ -597,8 +633,9 @@ outdata_error:
s5p_unset_indata(dev);
indata_error:
- s5p_aes_complete(dev, err);
+ s5p_sg_done(dev);
spin_unlock_irqrestore(&dev->lock, flags);
+ s5p_aes_complete(dev, err);
}
static void s5p_tasklet_cb(unsigned long data)
@@ -805,8 +842,9 @@ static int s5p_aes_probe(struct platform_device *pdev)
dev_warn(dev, "feed control interrupt is not available.\n");
goto err_irq;
}
- err = devm_request_irq(dev, pdata->irq_fc, s5p_aes_interrupt,
- IRQF_SHARED, pdev->name, pdev);
+ err = devm_request_threaded_irq(dev, pdata->irq_fc, NULL,
+ s5p_aes_interrupt, IRQF_ONESHOT,
+ pdev->name, pdev);
if (err < 0) {
dev_warn(dev, "feed control interrupt is not available.\n");
goto err_irq;