diff options
Diffstat (limited to 'drivers/clk/bcm/clk-bcm2835.c')
| -rw-r--r-- | drivers/clk/bcm/clk-bcm2835.c | 34 |
1 files changed, 29 insertions, 5 deletions
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 6bb7efa12037..027eba31f793 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -421,6 +421,7 @@ struct bcm2835_pll_data { u32 reference_enable_mask; /* Bit in CM_LOCK to indicate when the PLL has locked. */ u32 lock_mask; + u32 flags; const struct bcm2835_pll_ana_bits *ana; @@ -1310,7 +1311,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, init.num_parents = 1; init.name = pll_data->name; init.ops = &bcm2835_pll_clk_ops; - init.flags = CLK_IGNORE_UNUSED; + init.flags = pll_data->flags | CLK_IGNORE_UNUSED; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) @@ -1684,10 +1685,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* - * PLLB is used for the ARM's clock. Controlled by firmware, see - * clk-raspberrypi.c. - */ + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock. |