1 files changed, 171 insertions, 77 deletions

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 46ad8470c438..b4da31c5a5eb 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -93,6 +93,8 @@ struct opp_table *_find_opp_table(struct device *dev)
  * Return: voltage in micro volt corresponding to the opp, else
  * return 0
  *
+ * This is useful only for devices with single power supply.
+ *
  * Locking: This function must be called under rcu_read_lock(). opp is a rcu
  * protected pointer. This means that opp which could have been fetched by
  * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
@@ -112,7 +114,7 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 	if (IS_ERR_OR_NULL(tmp_opp))
 		pr_err("%s: Invalid parameters\n", __func__);
 	else
-		v = tmp_opp->supply.u_volt;
+		v = tmp_opp->supplies[0].u_volt;
 
 	return v;
 }
@@ -210,6 +212,24 @@ unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
 
+static int _get_regulator_count(struct device *dev)
+{
+	struct opp_table *opp_table;
+	int count;
+
+	rcu_read_lock();
+
+	opp_table = _find_opp_table(dev);
+	if (!IS_ERR(opp_table))
+		count = opp_table->regulator_count;
+	else
+		count = 0;
+
+	rcu_read_unlock();
+
+	return count;
+}
+
 /**
  * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds
  * @dev: device for which we do this operation
@@ -222,34 +242,51 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *opp;
-	struct regulator *reg;
+	struct regulator *reg, **regulators;
 	unsigned long latency_ns = 0;
-	unsigned long min_uV = ~0, max_uV = 0;
-	int ret;
+	int ret, i, count;
+	struct {
+		unsigned long min;
+		unsigned long max;
+	} *uV;
+
+	count = _get_regulator_count(dev);
+
+	/* Regulator may not be required for the device */
+	if (!count)
+		return 0;
+
+	regulators = kmalloc_array(count, sizeof(*regulators), GFP_KERNEL);
+	if (!regulators)
+		return 0;
+
+	uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL);
+	if (!uV)
+		goto free_regulators;
 
 	rcu_read_lock();
 
 	opp_table = _find_opp_table(dev);
 	if (IS_ERR(opp_table)) {
 		rcu_read_unlock();
-		return 0;
+		goto free_uV;
 	}
 
-	reg = opp_table->regulator;
-	if (IS_ERR(reg)) {
-		/* Regulator may not be required for device */
-		rcu_read_unlock();
-		return 0;
-	}
+	memcpy(regulators, opp_table->regulators, count * sizeof(*regulators));
 
-	list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
-		if (!opp->available)
-			continue;
+	for (i = 0; i < count; i++) {
+		uV[i].min = ~0;
+		uV[i].max = 0;
 
-		if (opp->supply.u_volt_min < min_uV)
-			min_uV = opp->supply.u_volt_min;
-		if (opp->supply.u_volt_max > max_uV)
-			max_uV = opp->supply.u_volt_max;
+		list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
+			if (!opp->available)
+				continue;
+
+			if (opp->supplies[i].u_volt_min < uV[i].min)
+				uV[i].min = opp->supplies[i].u_volt_min;
+			if (opp->supplies[i].u_volt_max > uV[i].max)
+				uV[i].max = opp->supplies[i].u_volt_max;
+		}
 	}
 
 	rcu_read_unlock();
@@ -258,9 +295,16 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	 * The caller needs to ensure that opp_table (and hence the regulator)
 	 * isn't freed, while we are executing this routine.
 	 */
-	ret = regulator_set_voltage_time(reg, min_uV, max_uV);
-	if (ret > 0)
-		latency_ns = ret * 1000;
+	for (i = 0; reg = regulators[i], i < count; i++) {
+		ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max);
+		if (ret > 0)
+			latency_ns += ret * 1000;
+	}
+
+free_uV:
+	kfree(uV);
+free_regulators:
+	kfree(regulators);
 
 	return latency_ns;
 }
@@ -580,7 +624,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *old_opp, *opp;
-	struct regulator *reg;
+	struct regulator *reg = ERR_PTR(-ENXIO);
 	struct clk *clk;
 	unsigned long freq, old_freq;
 	struct dev_pm_opp_supply old_supply, new_supply;
@@ -633,14 +677,23 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		return ret;
 	}
 
+	if (opp_table->regulators) {
+		/* This function only supports single regulator per device */
+		if (WARN_ON(opp_table->regulator_count > 1)) {
+			dev_err(dev, "multiple regulators not supported\n");
+			rcu_read_unlock();
+			return -EINVAL;
+		}
+
+		reg = opp_table->regulators[0];
+	}
+
 	if (IS_ERR(old_opp))
 		old_supply.u_volt = 0;
 	else
-		memcpy(&old_supply, &old_opp->supply, sizeof(old_supply));
-
-	memcpy(&new_supply, &opp->supply, sizeof(new_supply));
+		memcpy(&old_supply, old_opp->supplies, sizeof(old_supply));
 
-	reg = opp_table->regulator;
+	memcpy(&new_supply, opp->supplies, sizeof(new_supply));
 
 	rcu_read_unlock();
 
@@ -764,9 +817,6 @@ static struct opp_table *_add_opp_table(struct device *dev)
 
 	_of_init_opp_table(opp_table, dev);
 
-	/* Set regulator to a non-NULL error value */
-	opp_table->regulator = ERR_PTR(-ENXIO);
-
 	/* Find clk for the device */
 	opp_table->clk = clk_get(dev, NULL);
 	if (IS_ERR(opp_table->clk)) {
@@ -815,7 +865,7 @@ static void _remove_opp_table(struct opp_table *opp_table)
 	if (opp_table->prop_name)
 		return;
 
-	if (!IS_ERR(opp_table->regulator))
+	if (opp_table->regulators)
 		return;
 
 	/* Release clk */
@@ -924,35 +974,50 @@ struct dev_pm_opp *_allocate_opp(struct device *dev,
 				 struct opp_table **opp_table)
 {
 	struct dev_pm_opp *opp;
+	int count, supply_size;
+	struct opp_table *table;
 
-	/* allocate new OPP node */
-	opp = kzalloc(sizeof(*opp), GFP_KERNEL);
-	if (!opp)
+	table = _add_opp_table(dev);
+	if (!table)
 		return NULL;
 
-	INIT_LIST_HEAD(&opp->node);
+	/* Allocate space for at least one supply */
+	count = table->regulator_count ? table->regulator_count : 1;
+	supply_size = sizeof(*opp->supplies) * count;
 
-	*opp_table = _add_opp_table(dev);
-	if (!*opp_table) {
-		kfree(opp);
+	/* allocate new OPP node and supplies structures */
+	opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);
+	if (!opp) {
+		kfree(table);
 		return NULL;
 	}
 
+	/* Put the supplies at the end of the OPP structure as an empty array */
+	opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+	INIT_LIST_HEAD(&opp->node);
+
+	*opp_table = table;
+
 	return opp;
 }
 
 static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
 					 struct opp_table *opp_table)
 {
-	struct regulator *reg = opp_table->regulator;
-
-	if (!IS_ERR(reg) &&
-	    !regulator_is_supported_voltage(reg, opp->supply.u_volt_min,
-					    opp->supply.u_volt_max)) {
-		pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
-			__func__, opp->supply.u_volt_min,
-			opp->supply.u_volt_max);
-		return false;
+	struct regulator *reg;
+	int i;
+
+	for (i = 0; i < opp_table->regulator_count; i++) {
+		reg = opp_table->regulators[i];
+
+		if (!regulator_is_supported_voltage(reg,
+					opp->supplies[i].u_volt_min,
+					opp->supplies[i].u_volt_max)) {
+			pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+				__func__, opp->supplies[i].u_volt_min,
+				opp->supplies[i].u_volt_max);
+			return false;
+		}
 	}
 
 	return true;
@@ -984,12 +1049,13 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 
 		/* Duplicate OPPs */
 		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
-			 __func__, opp->rate, opp->supply.u_volt,
-			 opp->available, new_opp->rate, new_opp->supply.u_volt,
-			 new_opp->available);
+			 __func__, opp->rate, opp->supplies[0].u_volt,
+			 opp->available, new_opp->rate,
+			 new_opp->supplies[0].u_volt, new_opp->available);
 
+		/* Should we compare voltages for all regulators here ? */
 		return opp->available &&
-		       new_opp->supply.u_volt == opp->supply.u_volt ? 0 : -EEXIST;
+		       new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? 0 : -EEXIST;
 	}
 
 	new_opp->opp_table = opp_table;
@@ -1056,9 +1122,9 @@ int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 	/* populate the opp table */
 	new_opp->rate = freq;
 	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
-	new_opp->supply.u_volt = u_volt;
-	new_opp->supply.u_volt_min = u_volt - tol;
-	new_opp->supply.u_volt_max = u_volt + tol;
+	new_opp->supplies[0].u_volt = u_volt;
+	new_opp->supplies[0].u_volt_min = u_volt - tol;
+	new_opp->supplies[0].u_volt_max = u_volt + tol;
 	new_opp->available = true;
 	new_opp->dynamic = dynamic;
 
@@ -1303,12 +1369,14 @@ unlock:
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
 
 /**
- * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * dev_pm_opp_set_regulators() - Set regulator names for the device
  * @dev: Device for which regulator name is being set.
- * @name: Name of the regulator.
+ * @names: Array of pointers to the names of the regulator.
+ * @count: Number of regulators.
  *
  * In order to support OPP switching, OPP layer needs to know the name of the
- * device's regulator, as the core would be required to switch voltages as well.
+ * device's regulators, as the core would be required to switch voltages as
+ * well.
  *
  * This must be called before any OPPs are initialized for the device.
  *
@@ -1318,11 +1386,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-struct opp_table *dev_pm_opp_set_regulator(struct device *dev, const char *name)
+struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
+					    const char * const names[],
+					    unsigned int count)
 {
 	struct opp_table *opp_table;
 	struct regulator *reg;
-	int ret;
+	int ret, i;
 
 	mutex_lock(&opp_table_lock);
 
@@ -1338,26 +1408,44 @@ struct opp_table *dev_pm_opp_set_regulator(struct device *dev, const char *name)
 		goto err;
 	}
 
-	/* Already have a regulator set */
-	if (WARN_ON(!IS_ERR(opp_table->regulator))) {
+	/* Already have regulators set */
+	if (WARN_ON(opp_table->regulators)) {
 		ret = -EBUSY;
 		goto err;
 	}
-	/* Allocate the regulator */
-	reg = regulator_get_optional(dev, name);
-	if (IS_ERR(reg)) {
-		ret = PTR_ERR(reg);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "%s: no regulator (%s) found: %d\n",
-				__func__, name, ret);
+
+	opp_table->regulators = kmalloc_array(count,
+					      sizeof(*opp_table->regulators),
+					      GFP_KERNEL);
+	if (!opp_table->regulators) {
+		ret = -ENOMEM;
 		goto err;
 	}
 
-	opp_table->regulator = reg;
+	for (i = 0; i < count; i++) {
+		reg = regulator_get_optional(dev, names[i]);
+		if (IS_ERR(reg)) {
+			ret = PTR_ERR(reg);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "%s: no regulator (%s) found: %d\n",
+					__func__, names[i], ret);
+			goto free_regulators;
+		}
+
+		opp_table->regulators[i] = reg;
+	}
+
+	opp_table->regulator_count = count;
 
 	mutex_unlock(&opp_table_lock);
 	return opp_table;
 
+free_regulators:
+	while (i != 0)
+		regulator_put(opp_table->regulators[--i]);
+
+	kfree(opp_table->regulators);
+	opp_table->regulators = NULL;
 err:
 	_remove_opp_table(opp_table);
 unlock:
@@ -1365,11 +1453,11 @@ unlock:
 
 	return ERR_PTR(ret);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators);
 
 /**
- * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
- * @opp_table: OPP table returned from dev_pm_opp_set_regulator().
+ * dev_pm_opp_put_regulators() - Releases resources blocked for regulator
+ * @opp_table: OPP table returned from dev_pm_opp_set_regulators().
  *
  * Locking: The internal opp_table and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1377,20 +1465,26 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void dev_pm_opp_put_regulator(struct opp_table *opp_table)
+void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 {
+	int i;
+
 	mutex_lock(&opp_table_lock);
 
-	if (IS_ERR(opp_table->regulator)) {
-		pr_err("%s: Doesn't have regulator set\n", __func__);
+	if (!opp_table->regulators) {
+		pr_err("%s: Doesn't have regulators set\n", __func__);
 		goto unlock;
 	}
 
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	regulator_put(opp_table->regulator);
-	opp_table->regulator = ERR_PTR(-ENXIO);
+	for (i = opp_table->regulator_count - 1; i >= 0; i--)
+		regulator_put(opp_table->regulators[i]);
+
+	kfree(opp_table->regulators);
+	opp_table->regulators = NULL;
+	opp_table->regulator_count = 0;
 
 	/* Try freeing opp_table if this was the last blocking resource */
 	_remove_opp_table(opp_table);
@@ -1398,7 +1492,7 @@ void dev_pm_opp_put_regulator(struct opp_table *opp_table)
 unlock:
 	mutex_unlock(&opp_table_lock);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
 
 /**
  * dev_pm_opp_add()  - Add an OPP table from a table definitions