summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/kernel/pci_iommu.c20
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig4
-rw-r--r--arch/arm/nwfpe/fpmodule.c2
-rw-r--r--arch/blackfin/Kconfig2
-rw-r--r--arch/m68k/Kconfig.cpu2
-rw-r--r--arch/m68k/platform/coldfire/m532x.c2
-rw-r--r--arch/mips/Kconfig4
-rw-r--r--arch/mips/Kconfig.debug2
-rw-r--r--arch/mips/kernel/mips-mt.c2
-rw-r--r--arch/mips/lantiq/xway/gpio.c2
-rw-r--r--arch/mips/lantiq/xway/gpio_ebu.c2
-rw-r--r--arch/mips/lantiq/xway/gpio_stp.c2
-rw-r--r--arch/mips/sni/pcimt.c2
-rw-r--r--arch/openrisc/Kconfig2
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype4
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig2
-rw-r--r--arch/sh/Kconfig.cpu2
-rw-r--r--arch/x86/include/asm/atomic64_32.h10
-rw-r--r--arch/x86/kernel/cpu/match.c2
-rw-r--r--arch/xtensa/variants/s6000/dmac.c2
-rw-r--r--arch/xtensa/variants/s6000/gpio.c4
-rw-r--r--arch/xtensa/variants/s6000/include/variant/dmac.h2
-rw-r--r--arch/xtensa/variants/s6000/irq.c4
24 files changed, 43 insertions, 43 deletions
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index cd634795aa9c..3f844d26d2c7 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -236,7 +236,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
ok = 0;
/* If both conditions above are met, we are fine. */
- DBGA("pci_dac_dma_supported %s from %p\n",
+ DBGA("pci_dac_dma_supported %s from %pf\n",
ok ? "yes" : "no", __builtin_return_address(0));
return ok;
@@ -268,7 +268,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
&& paddr + size <= __direct_map_size) {
ret = paddr + __direct_map_base;
- DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %pf\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@@ -279,7 +279,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
if (dac_allowed) {
ret = paddr + alpha_mv.pci_dac_offset;
- DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %pf\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@@ -316,7 +316,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
ret = arena->dma_base + dma_ofs * PAGE_SIZE;
ret += (unsigned long)cpu_addr & ~PAGE_MASK;
- DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %pf\n",
cpu_addr, size, npages, ret, __builtin_return_address(0));
return ret;
@@ -385,14 +385,14 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
&& dma_addr < __direct_map_base + __direct_map_size) {
/* Nothing to do. */
- DBGA2("pci_unmap_single: direct [%llx,%zx] from %p\n",
+ DBGA2("pci_unmap_single: direct [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
return;
}
if (dma_addr > 0xffffffff) {
- DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %p\n",
+ DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
return;
}
@@ -424,7 +424,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
spin_unlock_irqrestore(&arena->lock, flags);
- DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
+ DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %pf\n",
dma_addr, size, npages, __builtin_return_address(0));
}
@@ -447,7 +447,7 @@ try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
if (! cpu_addr) {
printk(KERN_INFO "pci_alloc_consistent: "
- "get_free_pages failed from %p\n",
+ "get_free_pages failed from %pf\n",
__builtin_return_address(0));
/* ??? Really atomic allocation? Otherwise we could play
with vmalloc and sg if we can't find contiguous memory. */
@@ -466,7 +466,7 @@ try_again:
goto try_again;
}
- DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
+ DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %pf\n",
size, cpu_addr, *dma_addrp, __builtin_return_address(0));
return cpu_addr;
@@ -486,7 +486,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size,
pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
free_pages((unsigned long)cpu_addr, get_order(size));
- DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
+ DBGA2("pci_free_consistent: [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0a2fc01891a9..76edcfe8b56f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1914,10 +1914,10 @@ choice
default ZBOOT_ROM_NONE
help
Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the the ROM-able zImage
+ With this enabled it is possible to write the ROM-able zImage
kernel image to an MMC or SD card and boot the kernel straight
from the reset vector. At reset the processor Mask ROM will load
- the first part of the the ROM-able zImage which in turn loads the
+ the first part of the ROM-able zImage which in turn loads the
rest the kernel image to RAM.
config ZBOOT_ROM_NONE
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 82c0915729ee..06ca1cd4cae2 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1190-EV1 fitted.
config SMDK6410_WM1192_EV1
@@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1
daughtercard for the Samsung SMDK6410 reference platform.
Enabling this option will build support for this module into
the kernel. The presence of the daughtercard will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1192-EV1 fitted.
config MACH_NCP
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index cb7658e8acc5..4e729f055a81 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -147,7 +147,7 @@ void float_raise(signed char flags)
#ifdef CONFIG_DEBUG_USER
if (flags & debug)
printk(KERN_DEBUG
- "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
+ "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n",
current->comm, current->pid, flags,
__builtin_return_address(0), GET_USERREG()->ARM_pc);
#endif
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7f3c589cc024..79cfe2614bcc 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1309,7 +1309,7 @@ config PM_BFIN_WAKE_GP
(all processors, except ADSP-BF549). This option sets
the general-purpose wake-up enable (GPWE) control bit to enable
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
- On ADSP-BF549 this option enables the the same functionality on the
+ On ADSP-BF549 this option enables the same functionality on the
/MRXON pin also PH7.
config PM_BFIN_WAKE_PA15
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 8a9c767125a4..51b3274cbe71 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -7,7 +7,7 @@ choice
help
The Freescale (was Motorola) M68K family of processors implements
the full 68000 processor instruction set.
- The Freescale ColdFire family of processors is a modern derivitive
+ The Freescale ColdFire family of processors is a modern derivative
of the 68000 processor family. They are mainly targeted at embedded
applications, and are all System-On-Chip (SOC) devices, as opposed
to stand alone CPUs. They implement a subset of the original 68000
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
index 8e9476d59a65..5394223639f8 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -7,7 +7,7 @@
* Copyright (C) 2000, Lineo (www.lineo.com)
* Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
* Copyright Freescale Semiconductor, Inc 2006
- * Copyright (c) 2006, emlix, Sebastian Hess <sh@emlix.com>
+ * Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 186fc8cf9ee0..f5e121213c22 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1002,12 +1002,12 @@ config HOLES_IN_ZONE
bool
#
-# Endianess selection. Sufficiently obscure so many users don't know what to
+# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 83ed00a5644a..5a43aa0798ca 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -57,7 +57,7 @@ config CMDLINE
options.
config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firware arguments"
+ bool "Built-in command line overrides firmware arguments"
default n
depends on CMDLINE_BOOL
help
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 7f3376b1c219..6ded9bd1489c 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -209,7 +209,7 @@ void mips_mt_set_cpuoptions(void)
unsigned int nconfig7 = oconfig7;
if (mt_opt_norps) {
- printk("\"norps\" option deprectated: use \"rpsctl=\"\n");
+ printk("\"norps\" option deprecated: use \"rpsctl=\"\n");
}
if (mt_opt_rpsctl >= 0) {
printk("34K return prediction stack override set to %d.\n",
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index d2fa98f3c78d..c429a5bc080f 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -188,7 +188,7 @@ int __init ltq_gpio_init(void)
int ret = platform_driver_register(&ltq_gpio_driver);
if (ret)
- pr_info("ltq_gpio : Error registering platfom driver!");
+ pr_info("ltq_gpio : Error registering platform driver!");
return ret;
}
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
index b91c7f17f10f..aae17170472f 100644
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -119,7 +119,7 @@ static int __init ltq_ebu_init(void)
int ret = platform_driver_register(&ltq_ebu_driver);
if (ret)
- pr_info("ltq_ebu : Error registering platfom driver!");
+ pr_info("ltq_ebu : Error registering platform driver!");
return ret;
}
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index ff9991cddeaa..fd07d87adaa9 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -150,7 +150,7 @@ int __init ltq_stp_init(void)
int ret = platform_driver_register(&ltq_stp_driver);
if (ret)
- pr_info("ltq_stp: error registering platfom driver");
+ pr_info("ltq_stp: error registering platform driver");
return ret;
}
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index ed3b3d317358..cdb1417fba59 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -29,7 +29,7 @@ static void __init sni_pcimt_sc_init(void)
scsiz = cacheconf & 7;
if (scsiz == 0) {
- printk("Second level cache is deactived.\n");
+ printk("Second level cache is deactivated.\n");
return;
}
if (scsiz >= 6) {
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 7589051e79e0..297bd38f7c5d 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -142,7 +142,7 @@ config DEBUG_STACKOVERFLOW
bool "Check for kernel stack overflow"
default y
help
- Make extra checks for space avaliable on stack in some
+ Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 425db18580a2..9c80fc07384a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -258,7 +258,7 @@ config PPC_ICSWX_PID
default y
---help---
The PID register in server is used explicitly for ICSWX. In
- embedded systems PID managment is done by the system.
+ embedded systems PID management is done by the system.
config PPC_ICSWX_USE_SIGILL
bool "Should a bad CT cause a SIGILL?"
@@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL
default n
---help---
Should a bad CT used for "non-record form ICSWX" cause an
- illegal intruction signal or should it be silent as
+ illegal instruction signal or should it be silent as
architected.
If in doubt, say N here.
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 178a5f300bc9..837cf49357ed 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -67,7 +67,7 @@ config IO_EVENT_IRQ
This option will only enable the IO event platform code. You
will still need to enable or compile the actual drivers
- that use this infrastruture to handle IO event interrupts.
+ that use this infrastructure to handle IO event interrupts.
Say Y if you are unsure.
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index ddf096c7d8bf..770ff2d5b94d 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -1,7 +1,7 @@
menu "Processor features"
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big
diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h
index 198119910da5..b154de75c90c 100644
--- a/arch/x86/include/asm/atomic64_32.h
+++ b/arch/x86/include/asm/atomic64_32.h
@@ -63,7 +63,7 @@ ATOMIC64_DECL(add_unless);
/**
* atomic64_cmpxchg - cmpxchg atomic64 variable
- * @p: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
* @o: expected value
* @n: new value
*
@@ -98,7 +98,7 @@ static inline long long atomic64_xchg(atomic64_t *v, long long n)
/**
* atomic64_set - set atomic64 variable
* @v: pointer to type atomic64_t
- * @n: value to assign
+ * @i: value to assign
*
* Atomically sets the value of @v to @n.
*/
@@ -200,7 +200,7 @@ static inline long long atomic64_sub(long long i, atomic64_t *v)
* atomic64_sub_and_test - subtract value from variable and test result
* @i: integer value to subtract
* @v: pointer to type atomic64_t
- *
+ *
* Atomically subtracts @i from @v and returns
* true if the result is zero, or false for all
* other cases.
@@ -224,9 +224,9 @@ static inline void atomic64_inc(atomic64_t *v)
/**
* atomic64_dec - decrement atomic64 variable
- * @ptr: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
*
- * Atomically decrements @ptr by 1.
+ * Atomically decrements @v by 1.
*/
static inline void atomic64_dec(atomic64_t *v)
{
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
index 5502b289341b..36565373af87 100644
--- a/arch/x86/kernel/cpu/match.c
+++ b/arch/x86/kernel/cpu/match.c
@@ -23,7 +23,7 @@
* %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
*
* Arrays used to match for this should also be declared using
- * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ * MODULE_DEVICE_TABLE(x86cpu, ...)
*
* This always matches against the boot cpu, assuming models and features are
* consistent over all CPUs.
diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c
index dc7f7c573518..340f5bb0b5ef 100644
--- a/arch/xtensa/variants/s6000/dmac.c
+++ b/arch/xtensa/variants/s6000/dmac.c
@@ -1,5 +1,5 @@
/*
- * Authors: Oskar Schirmer <os@emlix.com>
+ * Authors: Oskar Schirmer <oskar@scara.com>
* Daniel Gloeckner <dg@emlix.com>
* (c) 2008 emlix GmbH http://www.emlix.com
*
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 7af0757e001b..b89541ba39ab 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -2,8 +2,8 @@
* s6000 gpio driver
*
* Copyright (c) 2009 emlix GmbH
- * Authors: Oskar Schirmer <os@emlix.com>
- * Johannes Weiner <jw@emlix.com>
+ * Authors: Oskar Schirmer <oskar@scara.com>
+ * Johannes Weiner <hannes@cmpxchg.org>
* Daniel Gloeckner <dg@emlix.com>
*/
#include <linux/bitops.h>
diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h
index e81735b2a206..3f88d9fc6897 100644
--- a/arch/xtensa/variants/s6000/include/variant/dmac.h
+++ b/arch/xtensa/variants/s6000/include/variant/dmac.h
@@ -8,7 +8,7 @@
* Copyright (C) 2006 Tensilica Inc.
* Copyright (C) 2008 Emlix GmbH <info@emlix.com>
* Authors: Fabian Godehardt <fg@emlix.com>
- * Oskar Schirmer <os@emlix.com>
+ * Oskar Schirmer <oskar@scara.com>
* Daniel Gloeckner <dg@emlix.com>
*/
diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c
index 6651e3285fcf..81a241e79075 100644
--- a/arch/xtensa/variants/s6000/irq.c
+++ b/arch/xtensa/variants/s6000/irq.c
@@ -2,8 +2,8 @@
* s6000 irq crossbar
*
* Copyright (c) 2009 emlix GmbH
- * Authors: Johannes Weiner <jw@emlix.com>
- * Oskar Schirmer <os@emlix.com>
+ * Authors: Johannes Weiner <hannes@cmpxchg.org>
+ * Oskar Schirmer <oskar@scara.com>
*/
#include <linux/io.h>
#include <asm/irq.h>