diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 13 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/virtex_ml510.c | 29 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/xilinx_intc.c | 5 |
4 files changed, 47 insertions, 1 deletions
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0d83a6a0397d..90e3192611a4 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -156,7 +156,7 @@ config YOSEMITE # This option enables support for the IBM PPC440GX evaluation board. config XILINX_VIRTEX440_GENERIC_BOARD - bool "Generic Xilinx Virtex 440 board" + bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x default n select XILINX_VIRTEX_5_FXT @@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD Most Virtex 5 designs should use this unless it needs to do some special configuration at board probe time. +config XILINX_ML510 + bool "Xilinx ML510 extra support" + depends on XILINX_VIRTEX440_GENERIC_BOARD + select PPC_PCI_CHOICE + select XILINX_PCI if PCI + select PPC_INDIRECT_PCI if PCI + select PPC_I8259 if PCI + help + This option enables extra support for features on the Xilinx ML510 + board. The ML510 has a PCI bus with ALI south bridge. + config PPC44x_SIMPLE bool "Simple PowerPC 44x board support" depends on 44x diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 01f51daace13..ee6185aeaa3b 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o +obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c new file mode 100644 index 000000000000..ba4a6e388a46 --- /dev/null +++ b/arch/powerpc/platforms/44x/virtex_ml510.c @@ -0,0 +1,29 @@ +#include <asm/i8259.h> +#include <linux/pci.h> +#include "44x.h" + +/** + * ml510_ail_quirk + */ +static void __devinit ml510_ali_quirk(struct pci_dev *dev) +{ + /* Enable the IDE controller */ + pci_write_config_byte(dev, 0x58, 0x4c); + /* Assign irq 14 to the primary ide channel */ + pci_write_config_byte(dev, 0x44, 0x0d); + /* Assign irq 15 to the secondary ide channel */ + pci_write_config_byte(dev, 0x75, 0x0f); + /* Set the ide controller in native mode */ + pci_write_config_byte(dev, 0x09, 0xff); + + /* INTB = disabled, INTA = disabled */ + pci_write_config_byte(dev, 0x48, 0x00); + /* INTD = disabled, INTC = disabled */ + pci_write_config_byte(dev, 0x4a, 0x00); + /* Audio = INT7, Modem = disabled. */ + pci_write_config_byte(dev, 0x4b, 0x60); + /* USB = INT7 */ + pci_write_config_byte(dev, 0x74, 0x06); +} +DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk); + diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index 90b57724a5e4..3ee1fd37bbfc 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -257,6 +257,11 @@ static void __init xilinx_i8259_setup_cascade(void) i8259_init(cascade_node, 0); set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade); + /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */ + /* This looks like a dirty hack to me --gcl */ + outb(0xc0, 0x4d0); + outb(0xc0, 0x4d1); + out: of_node_put(cascade_node); } |