diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86/entry/calling.h | 72 | ||||
| -rw-r--r-- | arch/x86/entry/entry_64.S | 9 | ||||
| -rw-r--r-- | arch/x86/entry/entry_64_compat.S | 4 | ||||
| -rw-r--r-- | arch/x86/include/asm/processor-flags.h | 5 | ||||
| -rw-r--r-- | arch/x86/include/asm/tlbflush.h | 91 | ||||
| -rw-r--r-- | arch/x86/include/uapi/asm/processor-flags.h | 7 | ||||
| -rw-r--r-- | arch/x86/kernel/asm-offsets.c | 4 | ||||
| -rw-r--r-- | arch/x86/mm/init.c | 2 | ||||
| -rw-r--r-- | arch/x86/mm/tlb.c | 1 |
9 files changed, 162 insertions, 33 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 3d3389a92c33..7894e5c0eef7 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -3,6 +3,9 @@ #include <asm/unwind_hints.h> #include <asm/cpufeatures.h> #include <asm/page_types.h> +#include <asm/percpu.h> +#include <asm/asm-offsets.h> +#include <asm/processor-flags.h> /* @@ -191,17 +194,21 @@ For 32-bit we have the following conventions - kernel is built with #ifdef CONFIG_PAGE_TABLE_ISOLATION -/* PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two halves: */ -#define PTI_SWITCH_MASK (1<<PAGE_SHIFT) +/* + * PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two + * halves: + */ +#define PTI_SWITCH_PGTABLES_MASK (1<<PAGE_SHIFT) +#define PTI_SWITCH_MASK (PTI_SWITCH_PGTABLES_MASK|(1<<X86_CR3_PTI_SWITCH_BIT)) -.macro ADJUST_KERNEL_CR3 reg:req - /* Clear "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */ - andq $(~PTI_SWITCH_MASK), \reg +.macro SET_NOFLUSH_BIT reg:req + bts $X86_CR3_PCID_NOFLUSH_BIT, \reg .endm -.macro ADJUST_USER_CR3 reg:req - /* Move CR3 up a page to the user page tables: */ - orq $(PTI_SWITCH_MASK), \reg +.macro ADJUST_KERNEL_CR3 reg:req + ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID + /* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */ + andq $(~PTI_SWITCH_MASK), \reg .endm .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req @@ -212,21 +219,58 @@ For 32-bit we have the following conventions - kernel is built with .Lend_\@: .endm -.macro SWITCH_TO_USER_CR3 scratch_reg:req +#define THIS_CPU_user_pcid_flush_mask \ + PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask + +.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI mov %cr3, \scratch_reg - ADJUST_USER_CR3 \scratch_reg + + ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID + + /* + * Test if the ASID needs a flush. + */ + movq \scratch_reg, \scratch_reg2 + andq $(0x7FF), \scratch_reg /* mask ASID */ + bt \scratch_reg, THIS_CPU_user_pcid_flush_mask + jnc .Lnoflush_\@ + + /* Flush needed, clear the bit */ + btr \scratch_reg, THIS_CPU_user_pcid_flush_mask + movq \scratch_reg2, \scratch_reg + jmp .Lwrcr3_\@ + +.Lnoflush_\@: + movq \scratch_reg2, \scratch_reg + SET_NOFLUSH_BIT \scratch_reg + +.Lwrcr3_\@: + /* Flip the PGD and ASID to the user version */ + orq $(PTI_SWITCH_MASK), \scratch_reg mov \scratch_reg, %cr3 .Lend_\@: .endm +.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req + pushq %rax + SWITCH_TO_USER_CR3_NOSTACK scratch_reg=\scratch_reg scratch_reg2=%rax + popq %rax +.endm + .macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI movq %cr3, \scratch_reg movq \scratch_reg, \save_reg /* - * Is the switch bit zero? This means the address is - * up in real PAGE_TABLE_ISOLATION patches in a moment. + * Is the "switch mask" all zero? That means that both of + * these are zero: + * + * 1. The user/kernel PCID bit, and + * 2. The user/kernel "bit" that points CR3 to the + * bottom half of the 8k PGD + * + * That indicates a kernel CR3 value, not a user CR3. */ testq $(PTI_SWITCH_MASK), \scratch_reg jz .Ldone_\@ @@ -251,7 +295,9 @@ For 32-bit we have the following conventions - kernel is built with .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req .endm -.macro SWITCH_TO_USER_CR3 scratch_reg:req +.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req +.endm +.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req .endm .macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req .endm diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 2ad7ad4d3dd6..fd501844af1f 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -23,7 +23,6 @@ #include <asm/segment.h> #include <asm/cache.h> #include <asm/errno.h> -#include "calling.h" #include <asm/asm-offsets.h> #include <asm/msr.h> #include <asm/unistd.h> @@ -40,6 +39,8 @@ #include <asm/frame.h> #include <linux/err.h> +#include "calling.h" + .code64 .section .entry.text, "ax" @@ -406,7 +407,7 @@ syscall_return_via_sysret: * We are on the trampoline stack. All regs except RDI are live. * We can do future final exit work right here. */ - SWITCH_TO_USER_CR3 scratch_reg=%rdi + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi popq %rdi popq %rsp @@ -744,7 +745,7 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode) * We can do future final exit work right here. */ - SWITCH_TO_USER_CR3 scratch_reg=%rdi + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi /* Restore RDI. */ popq %rdi @@ -857,7 +858,7 @@ native_irq_return_ldt: */ orq PER_CPU_VAR(espfix_stack), %rax - SWITCH_TO_USER_CR3 scratch_reg=%rdi /* to user CR3 */ + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi SWAPGS /* to user GS */ popq %rdi /* Restore user RDI */ diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 05238b29895e..40f17009ec20 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -275,9 +275,9 @@ sysret32_from_system_call: * switch until after after the last reference to the process * stack. * - * %r8 is zeroed before the sysret, thus safe to clobber. + * %r8/%r9 are zeroed before the sysret, thus safe to clobber. */ - SWITCH_TO_USER_CR3 scratch_reg=%r8 + SWITCH_TO_USER_CR3_NOSTACK scratch_reg=%r8 scratch_reg2=%r9 xorq %r8, %r8 xorq %r9, %r9 diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h index 43212a43ee69..6a60fea90b9d 100644 --- a/arch/x86/include/asm/processor-flags.h +++ b/arch/x86/include/asm/processor-flags.h @@ -38,6 +38,11 @@ #define CR3_ADDR_MASK __sme_clr(0x7FFFFFFFFFFFF000ull) #define CR3_PCID_MASK 0xFFFull #define CR3_NOFLUSH BIT_ULL(63) + +#ifdef CONFIG_PAGE_TABLE_ISOLATION +# define X86_CR3_PTI_SWITCH_BIT 11 +#endif + #else /* * CR3_ADDR_MASK needs at least bits 31:5 set on PAE systems, and we save diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 490a706fdba8..5dcc38b16604 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -10,6 +10,8 @@ #include <asm/special_insns.h> #include <asm/smp.h> #include <asm/invpcid.h> +#include <asm/pti.h> +#include <asm/processor-flags.h> static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) { @@ -24,24 +26,54 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) /* There are 12 bits of space for ASIDS in CR3 */ #define CR3_HW_ASID_BITS 12 + /* * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for * user/kernel switches */ -#define PTI_CONSUMED_ASID_BITS 0 +#ifdef CONFIG_PAGE_TABLE_ISOLATION +# define PTI_CONSUMED_PCID_BITS 1 +#else +# define PTI_CONSUMED_PCID_BITS 0 +#endif + +#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS) -#define CR3_AVAIL_ASID_BITS (CR3_HW_ASID_BITS - PTI_CONSUMED_ASID_BITS) /* * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account * for them being zero-based. Another -1 is because ASID 0 is reserved for * use by non-PCID-aware users. */ -#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_ASID_BITS) - 2) +#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2) + +/* + * 6 because 6 should be plenty and struct tlb_state will fit in two cache + * lines. + */ +#define TLB_NR_DYN_ASIDS 6 static inline u16 kern_pcid(u16 asid) { VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); + +#ifdef CONFIG_PAGE_TABLE_ISOLATION + /* + * Make sure that the dynamic ASID space does not confict with the + * bit we are using to switch between user and kernel ASIDs. + */ + BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_SWITCH_BIT)); + /* + * The ASID being passed in here should have respected the + * MAX_ASID_AVAILABLE and thus never have the switch bit set. + */ + VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_SWITCH_BIT)); +#endif + /* + * The dynamically-assigned ASIDs that get passed in are small + * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set, + * so do not bother to clear it. + * * If PCID is on, ASID-aware code paths put the ASID+1 into the * PCID bits. This serves two purposes. It prevents a nasty * situation in which PCID-unaware code saves CR3, loads some other @@ -95,12 +127,6 @@ static inline bool tlb_defer_switch_to_init_mm(void) return !static_cpu_has(X86_FEATURE_PCID); } -/* - * 6 because 6 should be plenty and struct tlb_state will fit in - * two cache lines. - */ -#define TLB_NR_DYN_ASIDS 6 - struct tlb_context { u64 ctx_id; u64 tlb_gen; @@ -146,6 +172,13 @@ struct tlb_state { bool invalidate_other; /* + * Mask that contains TLB_NR_DYN_ASIDS+1 bits to indicate + * the corresponding user PCID needs a flush next time we + * switch to it; see SWITCH_TO_USER_CR3. + */ + unsigned short user_pcid_flush_mask; + + /* * Access to this CR4 shadow and to H/W CR4 is protected by * disabling interrupts when modifying either one. */ @@ -250,14 +283,41 @@ static inline void cr4_set_bits_and_update_boot(unsigned long mask) extern void initialize_tlbstate_and_flush(void); /* + * Given an ASID, flush the corresponding user ASID. We can delay this + * until the next time we switch to it. + * + * See SWITCH_TO_USER_CR3. + */ +static inline void invalidate_user_asid(u16 asid) +{ + /* There is no user ASID if address space separation is off */ + if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION)) + return; + + /* + * We only have a single ASID if PCID is off and the CR3 + * write will have flushed it. + */ + if (!cpu_feature_enabled(X86_FEATURE_PCID)) + return; + + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + __set_bit(kern_pcid(asid), + (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask)); +} + +/* * flush the entire current user mapping */ static inline void __native_flush_tlb(void) { + invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); /* - * If current->mm == NULL then we borrow a mm which may change during a - * task switch and therefore we must not be preempted while we write CR3 - * back: + * If current->mm == NULL then we borrow a mm which may change + * during a task switch and therefore we must not be preempted + * while we write CR3 back: */ preempt_disable(); native_write_cr3(__native_read_cr3()); @@ -301,7 +361,14 @@ static inline void __native_flush_tlb_global(void) */ static inline void __native_flush_tlb_single(unsigned long addr) { + u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); + asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); + + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + invalidate_user_asid(loaded_mm_asid); } /* diff --git a/arch/x86/include/uapi/asm/processor-flags.h b/arch/x86/include/uapi/asm/processor-flags.h index 53b4ca55ebb6..97abdaab9535 100644 --- a/arch/x86/include/uapi/asm/processor-flags.h +++ b/arch/x86/include/uapi/asm/processor-flags.h @@ -78,7 +78,12 @@ #define X86_CR3_PWT _BITUL(X86_CR3_PWT_BIT) #define X86_CR3_PCD_BIT 4 /* Page Cache Disable */ #define X86_CR3_PCD _BITUL(X86_CR3_PCD_BIT) -#define X86_CR3_PCID_MASK _AC(0x00000fff,UL) /* PCID Mask */ + +#define X86_CR3_PCID_BITS 12 +#define X86_CR3_PCID_MASK (_AC((1UL << X86_CR3_PCID_BITS) - 1, UL)) + +#define X86_CR3_PCID_NOFLUSH_BIT 63 /* Preserve old PCID */ +#define X86_CR3_PCID_NOFLUSH _BITULL(X86_CR3_PCID_NOFLUSH_BIT) /* * Intel CPU features in CR4 diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c index 676b7cf4b62b..76417a9aab73 100644 --- a/arch/x86/kernel/asm-offsets.c +++ b/arch/x86/kernel/asm-offsets.c @@ -17,6 +17,7 @@ #include <asm/sigframe.h> #include <asm/bootparam.h> #include <asm/suspend.h> +#include <asm/tlbflush.h> #ifdef CONFIG_XEN #include <xen/interface/xen.h> @@ -94,6 +95,9 @@ void common(void) { BLANK(); DEFINE(PTREGS_SIZE, sizeof(struct pt_regs)); + /* TLB state for the entry code */ + OFFSET(TLB_STATE_user_pcid_flush_mask, tlb_state, user_pcid_flush_mask); + /* Layout info for cpu_entry_area */ OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss); OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline); diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index af75069fb116..caeb8a7bf0a4 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -855,7 +855,7 @@ void __init zone_sizes_init(void) free_area_init_nodes(max_zone_pfns); } -DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { +__visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { .loaded_mm = &init_mm, .next_asid = 1, .cr4 = ~0UL, /* fail hard if we screw up cr4 shadow initialization */ diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 42a8875f73fe..a1561957dccb 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -105,6 +105,7 @@ static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) unsigned long new_mm_cr3; if (need_flush) { + invalidate_user_asid(new_asid); new_mm_cr3 = build_cr3(pgdir, new_asid); } else { new_mm_cr3 = build_cr3_noflush(pgdir, new_asid); |