diff options
Diffstat (limited to 'arch')
191 files changed, 12158 insertions, 2868 deletions
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ecf0bfbab107..b2a781d9ce05 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig deleted file mode 100644 index bcd95b8dd2df..000000000000 --- a/arch/arm/configs/imx27ads_defconfig +++ /dev/null @@ -1,826 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:29:34 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -CONFIG_MACH_MX27ADS=y -# CONFIG_MACH_PCM038 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_FEC_OLD is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_IMX is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig index e05271753e15..0200d67e30ba 100644 --- a/arch/arm/configs/mx31ads_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:21:11 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:11:33 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_MX1ADS=y # # Freescale MXC Implementations # +CONFIG_ARCH_MX1=y # CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MX3 is not set # -# MX3 Options +# MX1 platforms: # -CONFIG_MACH_MX31ADS=y -# CONFIG_MACH_PCM037 is not set +CONFIG_MACH_MXLADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MXC_IRQ_PRIOR=y +# CONFIG_MXC_PWM is not set # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_OUTER_CACHE is not set # @@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,30 +263,41 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # -CONFIG_VFP=y +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -283,11 +306,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -446,17 +455,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -502,7 +537,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# # # SPI GPIO expanders: # -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# Sound +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_IMX=y +CONFIG_USB_IMX=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + # -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -643,6 +854,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_HW is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig index 41429a00f58c..083516cd0d7f 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:38:36 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 10:18:06 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -88,11 +99,10 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set CONFIG_ARCH_MX2=y # CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# +# CONFIG_MACH_MX21 is not set CONFIG_MACH_MX27=y # -# MX2 Platforms +# MX2 platforms: # -# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type @@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -255,30 +268,44 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -452,6 +478,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_FEC_OLD=y +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y @@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_SOC_CAMERA is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -732,8 +829,12 @@ CONFIG_FB=y # # Frame buffer hardware drivers # +CONFIG_FB_IMX=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -844,6 +974,11 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig index 4f41c4135685..72a8201a5370 100644 --- a/arch/arm/configs/mx31litekit_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,17 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 14:23:39 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:06:37 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -142,46 +150,54 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y +CONFIG_ARCH_MX31=y # -# MX3 Options +# MX3 platforms: # -# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_PCM037=y CONFIG_MACH_MX31LITE=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y @@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_COMMON_CLKDEV=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA is not set - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,33 +272,42 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -286,11 +316,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -451,18 +465,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -541,16 +547,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # -# USB Network Adapters +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -562,43 +562,7 @@ CONFIG_MII=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Watchdog Device Drivers +# Memory mapped GPIO expanders: # -# CONFIG_SOFT_WATCHDOG is not set # -# USB-based Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_USBPCWATCHDOG is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Sonics Silicon Backplane +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_CONFIG_MODE_0=y +CONFIG_MFD_WM8352_CONFIG_MODE_0=y +CONFIG_MFD_WM8350_I2C=y +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=y @@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9M001=y +CONFIG_SOC_CAMERA_MT9M111=y +CONFIG_SOC_CAMERA_MT9T031=y +CONFIG_SOC_CAMERA_MT9V022=y +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_MX3=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support @@ -719,9 +771,10 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -739,131 +792,79 @@ CONFIG_FB=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Miscellaneous USB options +# MMC/SD/SDIO Card Drivers # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# USB port drivers +# DMA Devices # -# CONFIG_USB_SERIAL is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_DMA_ENGINE=y # -# USB Miscellaneous drivers +# DMA Clients # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_WM8350=y # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -873,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig deleted file mode 100644 index 6e37c77c4760..000000000000 --- a/arch/arm/configs/pcm037_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 25 11:52:42 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_PCM037=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_SMSC911X=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 65a583ee5df8..2d58b8fe59be 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,9 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 16:59:23 2008 +# Linux kernel version: 2.6.30-rc2 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set @@ -12,6 +12,7 @@ CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C24XX_DCLK=y CONFIG_CPU_S3C244X=y -# CONFIG_S3C24XX_PWM is not set +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=128 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C24XX_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -174,7 +197,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # Boot options # # CONFIG_S3C_BOOT_WATCHDOG is not set -# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management @@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_DEV_HSMMC=y # # S3C2400 Machines @@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y CONFIG_CPU_S3C2410_DMA=y CONFIG_S3C2410_PM=y CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y CONFIG_SIMTEC_NOR=y CONFIG_MACH_BAST_IDE=y @@ -205,7 +230,7 @@ CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y CONFIG_BAST_PC104_IRQ=y -# CONFIG_MACH_TCT_HAMMER is not set +CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y CONFIG_MACH_QT2410=y CONFIG_CPU_S3C2412=y @@ -215,10 +240,11 @@ CONFIG_S3C2412_PM=y # # S3C2412 Machines # -# CONFIG_MACH_JIVE is not set +CONFIG_MACH_JIVE=y +# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y -# CONFIG_MACH_SMDK2412 is not set +CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y CONFIG_S3C2440_DMA=y @@ -232,7 +258,7 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y -# CONFIG_MACH_AT2440EVB is not set +CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y # @@ -286,25 +312,31 @@ CONFIG_ISA=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=200 # CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -317,6 +349,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -332,6 +369,8 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -346,10 +385,6 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=m CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -359,11 +394,13 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -372,15 +409,16 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y @@ -388,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m @@ -413,12 +468,181 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +# CONFIG_IP_VS_RR is not set +# CONFIG_IP_VS_WRR is not set +# CONFIG_IP_VS_LC is not set +# CONFIG_IP_VS_WLC is not set +# CONFIG_IP_VS_LBLC is not set +# CONFIG_IP_VS_LBLCR is not set +# CONFIG_IP_VS_DH is not set +# CONFIG_IP_VS_SH is not set +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -428,8 +652,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_SCH_FIFO=y +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -451,8 +677,8 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -462,35 +688,26 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set -# CONFIG_IEEE80211 is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -504,7 +721,9 @@ CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -513,6 +732,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -545,7 +765,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -CONFIG_MTD_MAP_BANK_WIDTH_16=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y @@ -566,8 +786,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_BAST=y -CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_PLATRAM is not set # @@ -590,6 +808,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_DEBUG is not set @@ -602,6 +821,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -620,7 +844,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -628,32 +852,40 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_93CX6=m CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_PLATFORM=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -699,6 +931,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -711,11 +945,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -731,9 +967,14 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y -# CONFIG_ENC28J60 is not set CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -742,11 +983,14 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -755,7 +999,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -778,7 +1025,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -789,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -808,20 +1055,88 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +# CONFIG_JOYSTICK_IFORCE_USB is not set +# CONFIG_JOYSTICK_IFORCE_232 is not set +# CONFIG_JOYSTICK_WARRIOR is not set +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -831,12 +1146,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -877,14 +1195,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2412=y CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y @@ -892,7 +1213,7 @@ CONFIG_PRINTER=y CONFIG_PPDEV=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -901,33 +1222,44 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ELEKTOR is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -943,6 +1275,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_GPIO=m # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m CONFIG_SPI_S3C24XX_GPIO=m @@ -950,44 +1283,56 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPI_TLE62X0=m +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # -# CONFIG_DEBUG_GPIO is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1003,10 +1348,16 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -1022,7 +1373,10 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1043,20 +1397,33 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1065,14 +1432,189 @@ CONFIG_MFD_SM501=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_PMS=m +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_AU0828=m +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_CADET=m +CONFIG_RADIO_RTRACK=m +CONFIG_RADIO_RTRACK2=m +CONFIG_RADIO_AZTECH=m +CONFIG_RADIO_GEMTEK=m +CONFIG_RADIO_SF16FMI=m +CONFIG_RADIO_SF16FMR2=m +CONFIG_RADIO_TERRATEC=m +CONFIG_RADIO_TRUST=m +CONFIG_RADIO_TYPHOON=m +CONFIG_RADIO_TYPHOON_PROC_FS=y +CONFIG_RADIO_ZOLTRIX=m +CONFIG_USB_DSBR=m +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +# CONFIG_DVB_USB_GL861 is not set +# CONFIG_DVB_USB_AU6610 is not set +# CONFIG_DVB_USB_DIGITV is not set +# CONFIG_DVB_USB_VP7045 is not set +# CONFIG_DVB_USB_VP702X is not set +# CONFIG_DVB_USB_GP8PSK is not set +# CONFIG_DVB_USB_NOVA_T_USB2 is not set +# CONFIG_DVB_USB_TTUSB2 is not set +# CONFIG_DVB_USB_DTT200U is not set +# CONFIG_DVB_USB_OPERA1 is not set +CONFIG_DVB_USB_AF9005=m +# CONFIG_DVB_USB_AF9005_REMOTE is not set +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DVB_CX22702=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DAB=y +CONFIG_USB_DABUSB=m # # Graphics support @@ -1082,6 +1624,7 @@ CONFIG_MFD_SM501=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1105,7 +1648,19 @@ CONFIG_FB_S3C2410=y # CONFIG_FB_S3C2410_DEBUG is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m # # Display device support @@ -1125,11 +1680,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set - -# -# Sound -# -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C_I2SV2_SOC=m +CONFIG_SND_S3C2412_SOC_I2S=m +CONFIG_SND_S3C2443_SOC_AC97=m +CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m +CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m +CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +CONFIG_SND_SOC_L3=m +CONFIG_SND_SOC_UDA134X=m +CONFIG_SND_SOC_WM8750=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1139,12 +1737,12 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # -# USB HID Boot Protocol drivers +# Special HID drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_HID_APPLE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1161,19 +1759,26 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1181,53 +1786,51 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # # USB port drivers # -# CONFIG_USB_USS720 is not set +CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1251,42 +1854,71 @@ CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_LD=m -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SPI=m +CONFIG_MMC_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1295,7 +1927,14 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_S3C24XX=m CONFIG_LEDS_H1940=m -# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_BD2802=m # # LED Triggers @@ -1304,7 +1943,13 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1335,31 +1980,43 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1370,27 +2027,40 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1416,15 +2086,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1444,27 +2112,49 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1546,6 +2236,11 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1565,14 +2260,39 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1586,19 +2306,29 @@ CONFIG_DEBUG_S3C_UART=0 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1630,10 +2360,14 @@ CONFIG_CRYPTO_HMAC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1663,23 +2397,37 @@ CONFIG_CRYPTO_DES=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 857f1dfac794..321c83e43a1e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -36,6 +36,8 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + unsigned long range_start; + unsigned long range_end; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) put_cpu_var(mmu_gathers); } -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +/* + * Memorize the range for the TLB flush. + */ +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} /* * In the case of tlb vma handling, we can optimise these away in the @@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) + if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } } static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); + if (!tlb->fullmm && tlb->range_end > 0) + flush_tlb_range(vma, tlb->range_start, tlb->range_end); } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 42623db7f870..e04173c7e621 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -83,6 +83,7 @@ #include <linux/net.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> struct oldabi_stat64 { unsigned long long st_dev; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6d9152de6074..ae24486f858a 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -100,7 +100,7 @@ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -static int ep93xx_timer_interrupt(int irq, void *dev_id) +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 7ae229bc1b79..e54057fb855b 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -28,9 +28,7 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/irqs.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif #include <mach/iomux.h> #include "devices.h" @@ -114,7 +112,6 @@ static struct platform_device flash_device = { * I2C */ -#ifdef CONFIG_I2C_IMX static int i2c_pins[] = { PA15_PF_I2C_SDA, PA16_PF_I2C_SCL, @@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { .platform_data = &pcf857x_data[1], }, }; -#endif /* * Board init @@ -172,12 +168,10 @@ static void __init mx1ads_init(void) mxc_register_device(&flash_device, &mx1ads_flash_data); /* I2C */ -#ifdef CONFIG_I2C_IMX i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); -#endif } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 2dee5c87614c..999d013e06e3 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) - _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) - _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) - _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) _REGISTER_CLOCK(NULL, "owire", owire_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index d6235583e979..194b8428bba4 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -19,6 +19,8 @@ config MACH_MX31ADS config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 83e5e8e1276f..a6d6efefa6aa 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { +static unsigned int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, @@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) wm8350->codec.platform_data = &imx32ads_wm8350_setup; + regulator_has_full_constraints(); + return 0; } diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c3648eff5137..b5227d837b2f 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -226,10 +226,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); - /* SMSC9215 IRQ pin */ + /* LAN9217 IRQ pin */ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), "pcm037-eth")) - gpio_direction_input(MX31_PIN_GPIO3_1); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 6c4283cec6f4..5a01e48fd8f1 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -251,32 +251,6 @@ static void __init qong_init_fpga(void) } /* - * This structure defines the MX31 memory map. - */ -static struct map_desc qong_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init qong_map_io(void) -{ - mxc_map_io(); - iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); -} - -/* * Board specific initialization. */ static void __init mxc_board_init(void) @@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = qong_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 67611dadb44e..bc0f73fbd4ca 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,7 +28,6 @@ #include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> -#include <linux/delay.h> #include <media/soc_camera.h> @@ -644,8 +643,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = { }; static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, + .rx_threshold = 1, + .tx_threshold = 1, + .gpio_cs = -1, }; static struct tdo24m_platform_data em_x270_tdo24m_pdata = { diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3465268ca716..485fede83d97 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq(int irq_nr, int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 90230c6f9925..a88d7caff0d1 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -10,13 +10,13 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); #else -static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) extern void colibri_pxa3xx_init_lcd(int bl_pin); #else -static inline void colibri_pxa3xx_init_lcd(int) {} +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} #endif #if defined(CONFIG_AX88796) diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 052bfe788ada..d15662aba008 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -37,7 +37,6 @@ /* USB */ #define GPIO_NR_PALMT5_USB_DETECT_N 15 -#define GPIO_NR_PALMT5_USB_POWER 95 #define GPIO_NR_PALMT5_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 9f7d62fb4cbb..e74082c872e1 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 0680f1a575a3..d7f81068c613 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* MATRIX KEYPAD */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, @@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = { /* setup udc GPIOs initial state */ static void __init palmt5_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); - gpio_free(GPIO_NR_PALMT5_USB_POWER); + if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMT5_USB_PULLUP); } } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 59d0c1cba556..14393d0ad8b8 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /* USB */ GPIO13_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -514,9 +515,9 @@ static void __init palmtx_map_io(void) /* setup udc GPIOs initial state */ static void __init palmtx_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); - gpio_free(GPIO_NR_PALMTX_USB_POWER); + if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTX_USB_PULLUP); } } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 332bd3263eaf..8f0d37d43b43 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -52,7 +52,6 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/udc.h> -#include <plat/iic.h> static struct map_desc jive_iodesc[] __initdata = { }; @@ -278,7 +277,7 @@ __setup("mtdset=", jive_mtdset); #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) -struct s3c2410fb_display jive_vgg2432a4_display[] = { +static struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, @@ -311,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info jive_lcd_config = { +static struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b05d56e230a1..9c6abf9fb540 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = { /* IDE channels */ -struct pata_platform_info anubis_ide_platdata = { +static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 41a00f57e5da..c8a46685ce38 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, - .init_machine = osiris_init, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 25f7935576f8..7f473e47e4f1 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + gpio_request(S3C64XX_GPN(5), "LCD power"); + gpio_request(S3C64XX_GPF(13), "LCD power"); + gpio_request(S3C64XX_GPF(15), "LCD power"); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 83fb72c4048a..599217b2e13f 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -27,6 +27,4 @@ struct imxuart_platform_data { unsigned int flags; }; -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index ab838cfe94f9..57e927a1fd3a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -518,6 +518,8 @@ enum iomux_pins { */ #define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) @@ -558,6 +560,16 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) #define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) @@ -585,6 +597,42 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index c02b8fc2d821..518a36504b88 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -45,7 +45,7 @@ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index e8c4cf56c24e..8b070a041a99 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -54,9 +54,6 @@ #define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (6*32 + 16) - /* fixed interrupt numbers */ #define MXC_INT_USBCTRL 58 #define MXC_INT_USBCTRL 58 diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 6e7578a3514b..0fb68a531f55 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -50,23 +50,27 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) +int imx_irq_set_priority(unsigned char irq, unsigned char prio) { +#ifdef CONFIG_MXC_IRQ_PRIOR unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq > 63) - return; + if (irq >= MXC_INTERNAL_IRQS) + return -EINVAL;; temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + + return 0; +#else + return -ENOSYS; +#endif } EXPORT_SYMBOL(imx_irq_set_priority); -#endif #ifdef CONFIG_FIQ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 7642b975a998..08044dec9731 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gpio.h> #include <linux/io.h> @@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) return ret; } +EXPORT_SYMBOL(s3c_gpio_cfgpin); int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { @@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) return ret; } +EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 6b1b5231511c..26f0cec3ac04 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 9a5c767e0a42..91adfa71c172 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc) readl(adc->regs + S3C2410_ADCDLY)); } -void s3c_adc_try(struct adc_device *adc) +static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; @@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 94a341aaa4e4..5c0491bf738b 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h new file mode 100644 index 000000000000..def80464d38f --- /dev/null +++ b/arch/h8300/include/asm/timer.h @@ -0,0 +1,25 @@ +#ifndef __H8300_TIMER_H +#define __H8300_TIMER_H + +void h8300_timer_tick(void); +void h8300_timer_setup(void); +void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, + unsigned int *hour, unsigned int *min, unsigned int *sec); + +#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */ + +#define calc_param(cnt, div, rate, limit) \ +do { \ + cnt = TIMER_FREQ / HZ; \ + for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \ + if (rate[div] == 0) \ + continue; \ + if ((cnt / rate[div]) > limit) \ + break; \ + } \ + if (div == ARRAY_SIZE(divide_rate)) \ + panic("Timer counter overflow"); \ + cnt /= divide_rate[div]; \ +} while(0) + +#endif diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild new file mode 100644 index 000000000000..c68e1680da01 --- /dev/null +++ b/arch/m32r/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/m32r/include/asm/addrspace.h b/arch/m32r/include/asm/addrspace.h new file mode 100644 index 000000000000..81782c122da4 --- /dev/null +++ b/arch/m32r/include/asm/addrspace.h @@ -0,0 +1,57 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 by Hiroyuki Kondo + * + * Defitions for the address spaces of the M32R CPUs. + */ +#ifndef __ASM_M32R_ADDRSPACE_H +#define __ASM_M32R_ADDRSPACE_H + +/* + * Memory segments (32bit kernel mode addresses) + */ +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +#define K0BASE KSEG0 + +/* + * Returns the kernel segment base of a given address + */ +#ifndef __ASSEMBLY__ +#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) +#else +#define KSEGX(a) ((a) & 0xe0000000) +#endif + +/* + * Returns the physical address of a KSEG0/KSEG1 address + */ +#ifndef __ASSEMBLY__ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) +#else +#define PHYSADDR(a) ((a) & 0x1fffffff) +#endif + +/* + * Map an address to a certain kernel segment + */ +#ifndef __ASSEMBLY__ +#define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0)) +#define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1)) +#define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2)) +#define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3)) +#else +#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) +#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) +#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) +#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) +#endif + +#endif /* __ASM_M32R_ADDRSPACE_H */ diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h new file mode 100644 index 000000000000..26351539b5ff --- /dev/null +++ b/arch/m32r/include/asm/assembler.h @@ -0,0 +1,229 @@ +#ifndef _ASM_M32R_ASSEMBLER_H +#define _ASM_M32R_ASSEMBLER_H + +/* + * linux/asm-m32r/assembler.h + * + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + * + * This file contains M32R architecture specific macro definitions. + */ + + +#ifndef __STR +#ifdef __ASSEMBLY__ +#define __STR(x) x +#else +#define __STR(x) #x +#endif +#endif /* __STR */ + +#ifdef CONFIG_SMP +#define M32R_LOCK __STR(lock) +#define M32R_UNLOCK __STR(unlock) +#else +#define M32R_LOCK __STR(ld) +#define M32R_UNLOCK __STR(st) +#endif + +#ifdef __ASSEMBLY__ +#undef ENTRY +#define ENTRY(name) ENTRY_M name + .macro ENTRY_M name + .global \name + ALIGN +\name: + .endm +#endif + + +/** + * LDIMM - load immediate value + * STI - enable interruption + * CLI - disable interruption + */ + +#ifdef __ASSEMBLY__ + +#define LDIMM(reg,x) LDIMM reg x + .macro LDIMM reg x + seth \reg, #high(\x) + or3 \reg, \reg, #low(\x) + .endm + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg + setpsw #0x40 -> nop + ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). + .endm + +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg + clrpsw #0x40 -> nop + ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). + .endm +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg + mvfc \reg, psw + or3 \reg, \reg, #0x0040 + mvtc \reg, psw + .endm + +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg + mvfc \reg, psw + and3 \reg, \reg, #0xffbf + mvtc \reg, psw + .endm +#endif /* CONFIG_CHIP_M32102 */ + + .macro SAVE_ALL + push r0 ; orig_r0 + push sp ; spi (r15) + push lr ; r14 + push r13 + mvfc r13, cr3 ; spu + push r13 + mvfc r13, bbpc + push r13 + mvfc r13, bbpsw + push r13 + mvfc r13, bpc + push r13 + mvfc r13, psw + push r13 +#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) + mvfaclo r13, a1 + push r13 + mvfachi r13, a1 + push r13 + mvfaclo r13, a0 + push r13 + mvfachi r13, a0 + push r13 +#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) + mvfaclo r13 + push r13 + mvfachi r13 + push r13 + ldi r13, #0 + push r13 ; dummy push acc1h + push r13 ; dummy push acc1l +#else +#error unknown isa configuration +#endif + ldi r13, #-1 + push r13 ; syscall_nr (default: -1) + push r12 + push r11 + push r10 + push r9 + push r8 + push r7 + push r3 + push r2 + push r1 + push r0 + addi sp, #-4 ; room for implicit pt_regs parameter + push r6 + push r5 + push r4 + .endm + + .macro RESTORE_ALL + pop r4 + pop r5 + pop r6 + addi sp, #4 + pop r0 + pop r1 + pop r2 + pop r3 + pop r7 + pop r8 + pop r9 + pop r10 + pop r11 + pop r12 + addi r15, #4 ; Skip syscall number +#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) + pop r13 + mvtachi r13, a0 + pop r13 + mvtaclo r13, a0 + pop r13 + mvtachi r13, a1 + pop r13 + mvtaclo r13, a1 +#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) + pop r13 ; dummy pop acc1h + pop r13 ; dummy pop acc1l + pop r13 + mvtachi r13 + pop r13 + mvtaclo r13 +#else +#error unknown isa configuration +#endif + pop r14 + mvtc r14, psw + pop r14 + mvtc r14, bpc + addi sp, #8 ; Skip bbpsw, bbpc + pop r14 + mvtc r14, cr3 ; spu + pop r13 + pop lr ; r14 + pop sp ; spi (r15) + addi sp, #4 ; Skip orig_r0 + .fillinsn +1: rte + .section .fixup,"ax" +2: bl do_exit + .previous + .section __ex_table,"a" + ALIGN + .long 1b, 2b + .previous + .endm + +#define GET_CURRENT(reg) get_current reg + .macro get_current reg + ldi \reg, #-8192 + and \reg, sp + .endm + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) + .macro SWITCH_TO_KERNEL_STACK + ; switch to kernel stack (spi) + clrpsw #0x80 -> nop + .endm +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + .macro SWITCH_TO_KERNEL_STACK + push r0 ; save r0 for working + mvfc r0, psw + and3 r0, r0, #0x00ff7f + mvtc r0, psw + slli r0, #16 + bltz r0, 1f ; check BSM-bit +; + ;; called from kernel context: previous stack = spi + pop r0 ; retrieve r0 + bra 2f + .fillinsn +1: + ;; called from user context: previous stack = spu + mvfc r0, cr3 ; spu + addi r0, #4 + mvtc r0, cr3 ; spu + ld r0, @(-4,r0) ; retrieve r0 + .fillinsn +2: + .endm +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_M32R_ASSEMBLER_H */ diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h new file mode 100644 index 000000000000..2eed30f84080 --- /dev/null +++ b/arch/m32r/include/asm/atomic.h @@ -0,0 +1,318 @@ +#ifndef _ASM_M32R_ATOMIC_H +#define _ASM_M32R_ATOMIC_H + +/* + * linux/include/asm-m32r/atomic.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/types.h> +#include <asm/assembler.h> +#include <asm/system.h> + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v,i) (((v)->counter) = (i)) + +/** + * atomic_add_return - add integer to atomic variable and return it + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and return (@i + @v). + */ +static __inline__ int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_add_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "add %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_sub_return - subtract integer from atomic variable and return it + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and return (@v - @i). + */ +static __inline__ int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_sub_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "sub %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +#define atomic_add(i,v) ((void) atomic_add_return((i), (v))) + +/** + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v))) + +/** + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) + +/** + * atomic_inc_return - increment atomic variable and return it + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 and returns the result. + */ +static __inline__ int atomic_inc_return(atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_inc_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "addi %0, #1; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_dec_return - decrement atomic variable and return it + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and returns the result. + */ +static __inline__ int atomic_dec_return(atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_dec_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "addi %0, #-1; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc(v) ((void)atomic_inc_return(v)) + +/** + * atomic_dec - decrement atomic variable + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec(v) ((void)atomic_dec_return(v)) + +/** + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +/** + * atomic_dec_and_test - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all + * other cases. + */ +#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) + +/** + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0) + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_clear_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + M32R_LOCK" %0, @%1; \n\t" + "and %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_set_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + M32R_LOCK" %0, @%1; \n\t" + "or %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/* Atomic operations are already serializing on m32r */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include <asm-generic/atomic.h> +#endif /* _ASM_M32R_ATOMIC_H */ diff --git a/arch/m32r/include/asm/auxvec.h b/arch/m32r/include/asm/auxvec.h new file mode 100644 index 000000000000..f76dcc860fae --- /dev/null +++ b/arch/m32r/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_M32R__AUXVEC_H +#define _ASM_M32R__AUXVEC_H + +#endif /* _ASM_M32R__AUXVEC_H */ diff --git a/arch/m32r/include/asm/bitops.h b/arch/m32r/include/asm/bitops.h new file mode 100644 index 000000000000..aaddf0d57603 --- /dev/null +++ b/arch/m32r/include/asm/bitops.h @@ -0,0 +1,275 @@ +#ifndef _ASM_M32R_BITOPS_H +#define _ASM_M32R_BITOPS_H + +/* + * linux/include/asm-m32r/bitops.h + * + * Copyright 1992, Linus Torvalds. + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <linux/compiler.h> +#include <asm/assembler.h> +#include <asm/system.h> +#include <asm/byteorder.h> +#include <asm/types.h> + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void set_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "or %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void clear_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "and %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void change_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "xor %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_set_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%2") + M32R_LOCK" %0, @%2; \n\t" + "mv %1, %0; \n\t" + "and %0, %3; \n\t" + "or %1, %3; \n\t" + M32R_UNLOCK" %1, @%2; \n\t" + : "=&r" (oldbit), "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%3") + M32R_LOCK" %0, @%3; \n\t" + "mv %1, %0; \n\t" + "and %0, %2; \n\t" + "not %2, %2; \n\t" + "and %1, %2; \n\t" + M32R_UNLOCK" %1, @%3; \n\t" + : "=&r" (oldbit), "=&r" (tmp), "+r" (mask) + : "r" (a) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_change_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%2") + M32R_LOCK" %0, @%2; \n\t" + "mv %1, %0; \n\t" + "and %0, %3; \n\t" + "xor %1, %3; \n\t" + M32R_UNLOCK" %1, @%2; \n\t" + : "=&r" (oldbit), "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +#include <asm-generic/bitops/non-atomic.h> +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> + +#ifdef __KERNEL__ + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> + +#endif /* __KERNEL__ */ + +#ifdef __KERNEL__ + +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_BITOPS_H */ diff --git a/arch/m32r/include/asm/bug.h b/arch/m32r/include/asm/bug.h new file mode 100644 index 000000000000..4cc0462c15b8 --- /dev/null +++ b/arch/m32r/include/asm/bug.h @@ -0,0 +1,4 @@ +#ifndef _M32R_BUG_H +#define _M32R_BUG_H +#include <asm-generic/bug.h> +#endif diff --git a/arch/m32r/include/asm/bugs.h b/arch/m32r/include/asm/bugs.h new file mode 100644 index 000000000000..f77214eff136 --- /dev/null +++ b/arch/m32r/include/asm/bugs.h @@ -0,0 +1,19 @@ +#ifndef _ASM_M32R_BUGS_H +#define _ASM_M32R_BUGS_H + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ +#include <asm/processor.h> + +static void __init check_bugs(void) +{ + extern unsigned long loops_per_jiffy; + + current_cpu_data.loops_per_jiffy = loops_per_jiffy; +} + +#endif /* _ASM_M32R_BUGS_H */ diff --git a/arch/m32r/include/asm/byteorder.h b/arch/m32r/include/asm/byteorder.h new file mode 100644 index 000000000000..21855d8b028b --- /dev/null +++ b/arch/m32r/include/asm/byteorder.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_BYTEORDER_H +#define _ASM_M32R_BYTEORDER_H + +#if defined(__LITTLE_ENDIAN__) +# include <linux/byteorder/little_endian.h> +#else +# include <linux/byteorder/big_endian.h> +#endif + +#endif /* _ASM_M32R_BYTEORDER_H */ diff --git a/arch/m32r/include/asm/cache.h b/arch/m32r/include/asm/cache.h new file mode 100644 index 000000000000..40b3ee98193d --- /dev/null +++ b/arch/m32r/include/asm/cache.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_CACHE_H +#define _ASM_M32R_CACHE_H + +/* L1 cache line size */ +#define L1_CACHE_SHIFT 4 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#endif /* _ASM_M32R_CACHE_H */ diff --git a/arch/m32r/include/asm/cachectl.h b/arch/m32r/include/asm/cachectl.h new file mode 100644 index 000000000000..2aab8f6fff41 --- /dev/null +++ b/arch/m32r/include/asm/cachectl.h @@ -0,0 +1,26 @@ +/* + * cachectl.h -- defines for M32R cache control system calls + * + * Copyright (C) 2003 by Kazuhiro Inaoka + */ +#ifndef __ASM_M32R_CACHECTL +#define __ASM_M32R_CACHECTL + +/* + * Options for cacheflush system call + * + * cacheflush() is currently fluch_cache_all(). + */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +/* + * Caching modes for the cachectl(2) call + * + * cachectl(2) is currently not supported and returns ENOSYS. + */ +#define CACHEABLE 0 /* make pages cacheable */ +#define UNCACHEABLE 1 /* make pages uncacheable */ + +#endif /* __ASM_M32R_CACHECTL */ diff --git a/arch/m32r/include/asm/cacheflush.h b/arch/m32r/include/asm/cacheflush.h new file mode 100644 index 000000000000..78587c958146 --- /dev/null +++ b/arch/m32r/include/asm/cacheflush.h @@ -0,0 +1,69 @@ +#ifndef _ASM_M32R_CACHEFLUSH_H +#define _ASM_M32R_CACHEFLUSH_H + +#include <linux/mm.h> + +extern void _flush_cache_all(void); +extern void _flush_cache_copyback_all(void); + +#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#ifndef CONFIG_SMP +#define flush_icache_range(start, end) _flush_cache_copyback_all() +#define flush_icache_page(vma,pg) _flush_cache_copyback_all() +#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_copyback_all() +#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() +#else /* CONFIG_SMP */ +extern void smp_flush_cache_all(void); +#define flush_icache_range(start, end) smp_flush_cache_all() +#define flush_icache_page(vma,pg) smp_flush_cache_all() +#define flush_icache_user_range(vma,pg,adr,len) smp_flush_cache_all() +#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() +#endif /* CONFIG_SMP */ +#elif defined(CONFIG_CHIP_M32102) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) _flush_cache_all() +#define flush_icache_page(vma,pg) _flush_cache_all() +#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_all() +#define flush_cache_sigtramp(addr) _flush_cache_all() +#else +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(addr) do { } while (0) +#endif /* CONFIG_CHIP_* */ + +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ASM_M32R_CACHEFLUSH_H */ diff --git a/arch/m32r/include/asm/checksum.h b/arch/m32r/include/asm/checksum.h new file mode 100644 index 000000000000..a7a7c4f44abe --- /dev/null +++ b/arch/m32r/include/asm/checksum.h @@ -0,0 +1,204 @@ +#ifdef __KERNEL__ +#ifndef _ASM_M32R_CHECKSUM_H +#define _ASM_M32R_CHECKSUM_H + +/* + * include/asm-m32r/checksum.h + * + * IP/TCP/UDP checksum routines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Some code taken from mips and parisc architecture. + * + * Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * The same as csum_partial, but copies from src while it checksums. + * + * Here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * This is a new version of the above that records errors it finds in *errp, + * but continues and zeros thre rest of the buffer. + */ +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, + int *err_ptr); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned long tmpreg; + __asm__( + " sll3 %1, %0, #16 \n" + " cmp %0, %0 \n" + " addx %0, %1 \n" + " ldi %1, #0 \n" + " srli %0, #16 \n" + " addx %0, %1 \n" + " xor3 %0, %0, #0x0000ffff \n" + : "=r" (sum), "=&r" (tmpreg) + : "0" (sum) + : "cbit" + ); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned long tmpreg0, tmpreg1; + __wsum sum; + + __asm__ __volatile__( + " ld %0, @%1+ \n" + " addi %2, #-4 \n" + "# bgez %2, 2f \n" + " cmp %0, %0 \n" + " ld %3, @%1+ \n" + " ld %4, @%1+ \n" + " addx %0, %3 \n" + " ld %3, @%1+ \n" + " addx %0, %4 \n" + " addx %0, %3 \n" + " .fillinsn\n" + "1: \n" + " ld %4, @%1+ \n" + " addi %2, #-1 \n" + " addx %0, %4 \n" + " bgtz %2, 1b \n" + "\n" + " ldi %3, #0 \n" + " addx %0, %3 \n" + " .fillinsn\n" + "2: \n" + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1) + : "1" (iph), "2" (ihl) + : "cbit", "memory"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#if defined(__LITTLE_ENDIAN) + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + unsigned long tmpreg; + + __asm__( + " cmp %0, %0 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " ldi %1, #0 \n" + " addx %0, %1 \n" + : "=r" (sum), "=&r" (tmpreg) + : "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum) + : "cbit" + ); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3; + __asm__( + " ld %1, @(%5) \n" + " ld %2, @(4,%5) \n" + " ld %3, @(8,%5) \n" + " ld %4, @(12,%5) \n" + " add %0, %1 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " ld %1, @(%6) \n" + " ld %2, @(4,%6) \n" + " ld %3, @(8,%6) \n" + " ld %4, @(12,%6) \n" + " addx %0, %1 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " addx %0, %7 \n" + " addx %0, %8 \n" + " ldi %1, #0 \n" + " addx %0, %1 \n" + : "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1), + "=&r" (tmpreg2), "=&r" (tmpreg3) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "cbit" + ); + + return csum_fold(sum); +} + +#endif /* _ASM_M32R_CHECKSUM_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/cputime.h b/arch/m32r/include/asm/cputime.h new file mode 100644 index 000000000000..0a47550df2b7 --- /dev/null +++ b/arch/m32r/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __M32R_CPUTIME_H +#define __M32R_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __M32R_CPUTIME_H */ diff --git a/arch/m32r/include/asm/current.h b/arch/m32r/include/asm/current.h new file mode 100644 index 000000000000..7859d864f2c2 --- /dev/null +++ b/arch/m32r/include/asm/current.h @@ -0,0 +1,15 @@ +#ifndef _ASM_M32R_CURRENT_H +#define _ASM_M32R_CURRENT_H + +#include <linux/thread_info.h> + +struct task_struct; + +static __inline__ struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current (get_current()) + +#endif /* _ASM_M32R_CURRENT_H */ diff --git a/arch/m32r/include/asm/delay.h b/arch/m32r/include/asm/delay.h new file mode 100644 index 000000000000..9dd9e999ea69 --- /dev/null +++ b/arch/m32r/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef _ASM_M32R_DELAY_H +#define _ASM_M32R_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/m32r/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* _ASM_M32R_DELAY_H */ diff --git a/arch/m32r/include/asm/device.h b/arch/m32r/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/m32r/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/m32r/include/asm/div64.h b/arch/m32r/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/m32r/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/m32r/include/asm/dma.h b/arch/m32r/include/asm/dma.h new file mode 100644 index 000000000000..52f6a22dd232 --- /dev/null +++ b/arch/m32r/include/asm/dma.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M32R_DMA_H +#define _ASM_M32R_DMA_H + +#include <asm/io.h> + +/* + * The maximum address that we can perform a DMA transfer + * to on this platform + */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x20000000) + +#endif /* _ASM_M32R_DMA_H */ diff --git a/arch/m32r/include/asm/elf.h b/arch/m32r/include/asm/elf.h new file mode 100644 index 000000000000..0cc34c94bf2b --- /dev/null +++ b/arch/m32r/include/asm/elf.h @@ -0,0 +1,134 @@ +#ifndef _ASM_M32R__ELF_H +#define _ASM_M32R__ELF_H + +/* + * ELF-specific definitions. + * + * Copyright (C) 1999-2004, Renesas Technology Corp. + * Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <asm/ptrace.h> +#include <asm/user.h> +#include <asm/page.h> + +/* M32R relocation types */ +#define R_M32R_NONE 0 +#define R_M32R_16 1 +#define R_M32R_32 2 +#define R_M32R_24 3 +#define R_M32R_10_PCREL 4 +#define R_M32R_18_PCREL 5 +#define R_M32R_26_PCREL 6 +#define R_M32R_HI16_ULO 7 +#define R_M32R_HI16_SLO 8 +#define R_M32R_LO16 9 +#define R_M32R_SDA16 10 +#define R_M32R_GNU_VTINHERIT 11 +#define R_M32R_GNU_VTENTRY 12 + +#define R_M32R_16_RELA 33 +#define R_M32R_32_RELA 34 +#define R_M32R_24_RELA 35 +#define R_M32R_10_PCREL_RELA 36 +#define R_M32R_18_PCREL_RELA 37 +#define R_M32R_26_PCREL_RELA 38 +#define R_M32R_HI16_ULO_RELA 39 +#define R_M32R_HI16_SLO_RELA 40 +#define R_M32R_LO16_RELA 41 +#define R_M32R_SDA16_RELA 42 +#define R_M32R_RELA_GNU_VTINHERIT 43 +#define R_M32R_RELA_GNU_VTENTRY 44 + +#define R_M32R_GOT24 48 +#define R_M32R_26_PLTREL 49 +#define R_M32R_COPY 50 +#define R_M32R_GLOB_DAT 51 +#define R_M32R_JMP_SLOT 52 +#define R_M32R_RELATIVE 53 +#define R_M32R_GOTOFF 54 +#define R_M32R_GOTPC24 55 +#define R_M32R_GOT16_HI_ULO 56 +#define R_M32R_GOT16_HI_SLO 57 +#define R_M32R_GOT16_LO 58 +#define R_M32R_GOTPC_HI_ULO 59 +#define R_M32R_GOTPC_HI_SLO 60 +#define R_M32R_GOTPC_LO 61 +#define R_M32R_GOTOFF_HI_ULO 62 +#define R_M32R_GOTOFF_HI_SLO 63 +#define R_M32R_GOTOFF_LO 64 + +#define R_M32R_NUM 256 + +/* + * ELF register definitions.. + */ +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +/* We have no FP mumumu. */ +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R)) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#if defined(__LITTLE_ENDIAN) +#define ELF_DATA ELFDATA2LSB +#elif defined(__BIG_ENDIAN) +#define ELF_DATA ELFDATA2MSB +#else +#error no endian defined +#endif +#define ELF_ARCH EM_M32R + +/* r0 is set by ld.so to a pointer to a function which might be + * registered using 'atexit'. This provides a mean for the dynamic + * linker to call DT_FINI functions for shared libraries that have + * been loaded before the code runs. + * + * So that we can use the same startup file with static executables, + * we start programs with a value of 0 to indicate that there is no + * such function. + */ +#define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. + * Typical use of this is to invoke "./ld.so someprog" to test out a + * new version of the loader. We need to make sure that it is out of + * the way of the program that it will "exec", and that there is + * sufficient room for the brk. + */ +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) + +/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is + now struct_user_regs, they are different) */ + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. */ +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif /* _ASM_M32R__ELF_H */ diff --git a/arch/m32r/include/asm/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/m32r/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m32r/include/asm/errno.h b/arch/m32r/include/asm/errno.h new file mode 100644 index 000000000000..777149262aad --- /dev/null +++ b/arch/m32r/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_ERRNO_H +#define _ASM_M32R_ERRNO_H + +#include <asm-generic/errno.h> + +#endif /* _ASM_M32R_ERRNO_H */ diff --git a/arch/m32r/include/asm/fb.h b/arch/m32r/include/asm/fb.h new file mode 100644 index 000000000000..d92e99cd8c8a --- /dev/null +++ b/arch/m32r/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/m32r/include/asm/fcntl.h b/arch/m32r/include/asm/fcntl.h new file mode 100644 index 000000000000..46ab12db5739 --- /dev/null +++ b/arch/m32r/include/asm/fcntl.h @@ -0,0 +1 @@ +#include <asm-generic/fcntl.h> diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h new file mode 100644 index 000000000000..d851cf0c4aa5 --- /dev/null +++ b/arch/m32r/include/asm/flat.h @@ -0,0 +1,146 @@ +/* + * include/asm-m32r/flat.h + * + * uClinux flat-format executables + * + * Copyright (C) 2004 Kazuhiro Inaoka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __ASM_M32R_FLAT_H +#define __ASM_M32R_FLAT_H + +#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_set_persistent(relval, p) 0 +#define flat_reloc_valid(reloc, size) \ + (((reloc) - textlen_for_m32r_lo16_data) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + m32r_flat_get_addr_from_rp(rp, relval, (text_len) ) + +#define flat_put_addr_at_rp(rp, addr, relval) \ + m32r_flat_put_addr_at_rp(rp, addr, relval) + +/* Convert a relocation entry into an address. */ +static inline unsigned long +flat_get_relocate_addr (unsigned long relval) +{ + return relval & 0x00ffffff; /* Mask out top 8-bits */ +} + +#define flat_m32r_get_reloc_type(relval) ((relval) >> 24) + +#define M32R_SETH_OPCODE 0xd0c00000 /* SETH instruction code */ + +#define FLAT_M32R_32 0x00 /* 32bits reloc */ +#define FLAT_M32R_24 0x01 /* unsigned 24bits reloc */ +#define FLAT_M32R_16 0x02 /* 16bits reloc */ +#define FLAT_M32R_LO16 0x03 /* signed low 16bits reloc (low()) */ +#define FLAT_M32R_LO16_DATA 0x04 /* signed low 16bits reloc (low()) + for a symbol in .data section */ + /* High 16bits of an address used + when the lower 16bbits are treated + as unsigned. + To create SETH instruction only. + 0x1X: X means a number of register. + 0x10 - 0x3F are reserved. */ +#define FLAT_M32R_HI16_ULO 0x10 /* reloc for SETH Rn,#high(imm16) */ + /* High 16bits of an address used + when the lower 16bbits are treated + as signed. + To create SETH instruction only. + 0x2X: X means a number of register. + 0x20 - 0x4F are reserved. */ +#define FLAT_M32R_HI16_SLO 0x20 /* reloc for SETH Rn,#shigh(imm16) */ + +static unsigned long textlen_for_m32r_lo16_data = 0; + +static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp, + unsigned long relval, + unsigned long textlen) +{ + unsigned int reloc = flat_m32r_get_reloc_type (relval); + textlen_for_m32r_lo16_data = 0; + if (reloc & 0xf0) { + unsigned long addr = htonl(*rp); + switch (reloc & 0xf0) + { + case FLAT_M32R_HI16_ULO: + case FLAT_M32R_HI16_SLO: + if (addr == 0) { + /* put "seth Rn,#0x0" instead of 0 (addr). */ + *rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24)); + } + return addr; + default: + break; + } + } else { + switch (reloc) + { + case FLAT_M32R_LO16: + return htonl(*rp) & 0xFFFF; + case FLAT_M32R_LO16_DATA: + /* FIXME: The return value will decrease by textlen + at m32r_flat_put_addr_at_rp () */ + textlen_for_m32r_lo16_data = textlen; + return (htonl(*rp) & 0xFFFF) + textlen; + case FLAT_M32R_16: + return htons(*(unsigned short *)rp) & 0xFFFF; + case FLAT_M32R_24: + return htonl(*rp) & 0xFFFFFF; + case FLAT_M32R_32: + return htonl(*rp); + default: + break; + } + } + return ~0; /* bogus value */ +} + +static inline void m32r_flat_put_addr_at_rp (unsigned long *rp, + unsigned long addr, + unsigned long relval) +{ + unsigned int reloc = flat_m32r_get_reloc_type (relval); + if (reloc & 0xf0) { + unsigned long Rn = reloc & 0x0f; /* get a number of register */ + Rn <<= 24; /* 0x0R000000 */ + reloc &= 0xf0; + switch (reloc) + { + case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */ + *rp = (M32R_SETH_OPCODE | Rn + | ((addr >> 16) & 0xFFFF)); + break; + case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */ + *rp = (M32R_SETH_OPCODE | Rn + | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0)) + & 0xFFFF)); + break; + } + } else { + switch (reloc) { + case FLAT_M32R_LO16_DATA: + addr -= textlen_for_m32r_lo16_data; + textlen_for_m32r_lo16_data = 0; + case FLAT_M32R_LO16: + *rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF); + break; + case FLAT_M32R_16: + *(unsigned short *)rp = addr & 0xFFFF; + break; + case FLAT_M32R_24: + *rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF); + break; + case FLAT_M32R_32: + *rp = addr; + break; + } + } +} + +#endif /* __ASM_M32R_FLAT_H */ diff --git a/arch/m32r/include/asm/ftrace.h b/arch/m32r/include/asm/ftrace.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/m32r/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/m32r/include/asm/futex.h b/arch/m32r/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/m32r/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <asm-generic/futex.h> + +#endif diff --git a/arch/m32r/include/asm/hardirq.h b/arch/m32r/include/asm/hardirq.h new file mode 100644 index 000000000000..cb8aa762f235 --- /dev/null +++ b/arch/m32r/include/asm/hardirq.h @@ -0,0 +1,36 @@ +#ifdef __KERNEL__ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +#if NR_IRQS > 256 +#define HARDIRQ_BITS 9 +#else +#define HARDIRQ_BITS 8 +#endif + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +static inline void ack_bad_irq(int irq) +{ + printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); + BUG(); +} + +#endif /* __ASM_HARDIRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/hw_irq.h b/arch/m32r/include/asm/hw_irq.h new file mode 100644 index 000000000000..7138537cda03 --- /dev/null +++ b/arch/m32r/include/asm/hw_irq.h @@ -0,0 +1,4 @@ +#ifndef _ASM_M32R_HW_IRQ_H +#define _ASM_M32R_HW_IRQ_H + +#endif /* _ASM_M32R_HW_IRQ_H */ diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h new file mode 100644 index 000000000000..d06933bd6318 --- /dev/null +++ b/arch/m32r/include/asm/io.h @@ -0,0 +1,200 @@ +#ifndef _ASM_M32R_IO_H +#define _ASM_M32R_IO_H + +#include <linux/string.h> +#include <linux/compiler.h> +#include <asm/page.h> /* __va */ + +#ifdef __KERNEL__ + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +extern void __iomem * +__ioremap(unsigned long offset, unsigned long size, unsigned long flags); + +/** + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ + +static inline void __iomem *ioremap(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, 0); +} + +extern void iounmap(volatile void __iomem *addr); +#define ioremap_nocache(off,size) ioremap(off,size) + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) +#define page_to_bus page_to_phys +#define virt_to_bus virt_to_phys + +extern unsigned char _inb(unsigned long); +extern unsigned short _inw(unsigned long); +extern unsigned long _inl(unsigned long); +extern unsigned char _inb_p(unsigned long); +extern unsigned short _inw_p(unsigned long); +extern unsigned long _inl_p(unsigned long); +extern void _outb(unsigned char, unsigned long); +extern void _outw(unsigned short, unsigned long); +extern void _outl(unsigned long, unsigned long); +extern void _outb_p(unsigned char, unsigned long); +extern void _outw_p(unsigned short, unsigned long); +extern void _outl_p(unsigned long, unsigned long); +extern void _insb(unsigned int, void *, unsigned long); +extern void _insw(unsigned int, void *, unsigned long); +extern void _insl(unsigned int, void *, unsigned long); +extern void _outsb(unsigned int, const void *, unsigned long); +extern void _outsw(unsigned int, const void *, unsigned long); +extern void _outsl(unsigned int, const void *, unsigned long); + +static inline unsigned char _readb(unsigned long addr) +{ + return *(volatile unsigned char __force *)addr; +} + +static inline unsigned short _readw(unsigned long addr) +{ + return *(volatile unsigned short __force *)addr; +} + +static inline unsigned long _readl(unsigned long addr) +{ + return *(volatile unsigned long __force *)addr; +} + +static inline void _writeb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char __force *)addr = b; +} + +static inline void _writew(unsigned short w, unsigned long addr) +{ + *(volatile unsigned short __force *)addr = w; +} + +static inline void _writel(unsigned long l, unsigned long addr) +{ + *(volatile unsigned long __force *)addr = l; +} + +#define inb _inb +#define inw _inw +#define inl _inl +#define outb _outb +#define outw _outw +#define outl _outl + +#define inb_p _inb_p +#define inw_p _inw_p +#define inl_p _inl_p +#define outb_p _outb_p +#define outw_p _outw_p +#define outl_p _outl_p + +#define insb _insb +#define insw _insw +#define insl _insl +#define outsb _outsb +#define outsw _outsw +#define outsl _outsl + +#define readb(addr) _readb((unsigned long)(addr)) +#define readw(addr) _readw((unsigned long)(addr)) +#define readl(addr) _readl((unsigned long)(addr)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +#define writeb(val, addr) _writeb((val), (unsigned long)(addr)) +#define writew(val, addr) _writew((val), (unsigned long)(addr)) +#define writel(val, addr) _writel((val), (unsigned long)(addr)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define mmiowb() + +#define flush_write_buffers() do { } while (0) /* M32R_FIXME */ + +static inline void +memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} + +static inline void +memcpy_fromio(void *dst, volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} + +static inline void +memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_IO_H */ diff --git a/arch/m32r/include/asm/ioctl.h b/arch/m32r/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/m32r/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h new file mode 100644 index 000000000000..b9f54bb5d7cf --- /dev/null +++ b/arch/m32r/include/asm/ioctls.h @@ -0,0 +1,87 @@ +#ifndef __ARCH_M32R_IOCTLS_H__ +#define __ARCH_M32R_IOCTLS_H__ + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_M32R_IOCTLS_H__ */ diff --git a/arch/m32r/include/asm/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h new file mode 100644 index 000000000000..8d2d7c8ffdb0 --- /dev/null +++ b/arch/m32r/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef _ASM_M32R_IPCBUF_H +#define _ASM_M32R_IPCBUF_H + +/* + * The ipc64_perm structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_M32R_IPCBUF_H */ diff --git a/arch/m32r/include/asm/irq.h b/arch/m32r/include/asm/irq.h new file mode 100644 index 000000000000..242028b4d86a --- /dev/null +++ b/arch/m32r/include/asm/irq.h @@ -0,0 +1,90 @@ +#ifdef __KERNEL__ +#ifndef _ASM_M32R_IRQ_H +#define _ASM_M32R_IRQ_H + + +#if defined(CONFIG_PLAT_USRV) +/* + * IRQ definitions for M32700UT + * M32700 Chip: 64 interrupts + * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + */ +#define M32700UT_NUM_CPU_IRQ (64) +#define M32700UT_NUM_PLD_IRQ (32) +#define M32700UT_IRQ_BASE 0 +#define M32700UT_CPU_IRQ_BASE M32700UT_IRQ_BASE +#define M32700UT_PLD_IRQ_BASE (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) + +#define NR_IRQS (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ) +#elif defined(CONFIG_PLAT_M32700UT) +/* + * IRQ definitions for M32700UT(Rev.C) + M32R-LAN + * M32700 Chip: 64 interrupts + * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin + * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin + */ +#define M32700UT_NUM_CPU_IRQ (64) +#define M32700UT_NUM_PLD_IRQ (32) +#define M32700UT_NUM_LCD_PLD_IRQ (32) +#define M32700UT_NUM_LAN_PLD_IRQ (32) +#define M32700UT_IRQ_BASE 0 +#define M32700UT_CPU_IRQ_BASE (M32700UT_IRQ_BASE) +#define M32700UT_PLD_IRQ_BASE \ + (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) +#define M32700UT_LCD_PLD_IRQ_BASE \ + (M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ) +#define M32700UT_LAN_PLD_IRQ_BASE \ + (M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ) + +#define NR_IRQS \ + (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \ + + M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ) +#elif defined(CONFIG_PLAT_OPSPUT) +/* + * IRQ definitions for OPSPUT + M32R-LAN + * OPSP Chip: 64 interrupts + * ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin + * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin + */ +#define OPSPUT_NUM_CPU_IRQ (64) +#define OPSPUT_NUM_PLD_IRQ (32) +#define OPSPUT_NUM_LCD_PLD_IRQ (32) +#define OPSPUT_NUM_LAN_PLD_IRQ (32) +#define OPSPUT_IRQ_BASE 0 +#define OPSPUT_CPU_IRQ_BASE (OPSPUT_IRQ_BASE) +#define OPSPUT_PLD_IRQ_BASE \ + (OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ) +#define OPSPUT_LCD_PLD_IRQ_BASE \ + (OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ) +#define OPSPUT_LAN_PLD_IRQ_BASE \ + (OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ) + +#define NR_IRQS \ + (OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \ + + OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ) + +#elif defined(CONFIG_PLAT_M32104UT) +/* + * IRQ definitions for M32104UT + * M32104 Chip: 64 interrupts + * ICU of M32104UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + */ +#define M32104UT_NUM_CPU_IRQ (64) +#define M32104UT_NUM_PLD_IRQ (32) +#define M32104UT_IRQ_BASE 0 +#define M32104UT_CPU_IRQ_BASE M32104UT_IRQ_BASE +#define M32104UT_PLD_IRQ_BASE (M32104UT_CPU_IRQ_BASE + M32104UT_NUM_CPU_IRQ) + +#define NR_IRQS \ + (M32104UT_NUM_CPU_IRQ + M32104UT_NUM_PLD_IRQ) + +#else +#define NR_IRQS 64 +#endif + +#define irq_canonicalize(irq) (irq) + +#endif /* _ASM_M32R_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/irq_regs.h b/arch/m32r/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/m32r/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/m32r/include/asm/kdebug.h b/arch/m32r/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/m32r/include/asm/kdebug.h @@ -0,0 +1 @@ +#include <asm-generic/kdebug.h> diff --git a/arch/m32r/include/asm/kmap_types.h b/arch/m32r/include/asm/kmap_types.h new file mode 100644 index 000000000000..fa94dc6410ea --- /dev/null +++ b/arch/m32r/include/asm/kmap_types.h @@ -0,0 +1,29 @@ +#ifndef __M32R_KMAP_TYPES_H +#define __M32R_KMAP_TYPES_H + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif /* __M32R_KMAP_TYPES_H */ diff --git a/arch/m32r/include/asm/linkage.h b/arch/m32r/include/asm/linkage.h new file mode 100644 index 000000000000..a9fb151cf648 --- /dev/null +++ b/arch/m32r/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 4 +#define __ALIGN_STR ".balign 4" + +#endif /* __ASM_LINKAGE_H */ diff --git a/arch/m32r/include/asm/local.h b/arch/m32r/include/asm/local.h new file mode 100644 index 000000000000..22256d138630 --- /dev/null +++ b/arch/m32r/include/asm/local.h @@ -0,0 +1,366 @@ +#ifndef __M32R_LOCAL_H +#define __M32R_LOCAL_H + +/* + * linux/include/asm-m32r/local.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + * Copyright (C) 2007 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> + */ + +#include <linux/percpu.h> +#include <asm/assembler.h> +#include <asm/system.h> +#include <asm/local.h> + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +/* + * Make sure gcc doesn't try to be clever and move things around + * on us. We need to use _exactly_ the address the user gave us, + * not some alias that contains the same information. + */ +typedef struct { volatile int counter; } local_t; + +#define LOCAL_INIT(i) { (i) } + +/** + * local_read - read local variable + * @l: pointer of type local_t + * + * Atomically reads the value of @l. + */ +#define local_read(l) ((l)->counter) + +/** + * local_set - set local variable + * @l: pointer of type local_t + * @i: required value + * + * Atomically sets the value of @l to @i. + */ +#define local_set(l, i) (((l)->counter) = (i)) + +/** + * local_add_return - add long to local variable and return it + * @i: long value to add + * @l: pointer of type local_t + * + * Atomically adds @i to @l and return (@i + @l). + */ +static inline long local_add_return(long i, local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_add_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "add %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_sub_return - subtract long from local variable and return it + * @i: long value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and return (@l - @i). + */ +static inline long local_sub_return(long i, local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_sub_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "sub %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_add - add long to local variable + * @i: long value to add + * @l: pointer of type local_t + * + * Atomically adds @i to @l. + */ +#define local_add(i, l) ((void) local_add_return((i), (l))) + +/** + * local_sub - subtract the local variable + * @i: long value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l. + */ +#define local_sub(i, l) ((void) local_sub_return((i), (l))) + +/** + * local_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and returns + * true if the result is zero, or false for all + * other cases. + */ +#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) + +/** + * local_inc_return - increment local variable and return it + * @l: pointer of type local_t + * + * Atomically increments @l by 1 and returns the result. + */ +static inline long local_inc_return(local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_inc_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "addi %0, #1; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_dec_return - decrement local variable and return it + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and returns the result. + */ +static inline long local_dec_return(local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_dec_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "addi %0, #-1; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_inc - increment local variable + * @l: pointer of type local_t + * + * Atomically increments @l by 1. + */ +#define local_inc(l) ((void)local_inc_return(l)) + +/** + * local_dec - decrement local variable + * @l: pointer of type local_t + * + * Atomically decrements @l by 1. + */ +#define local_dec(l) ((void)local_dec_return(l)) + +/** + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +/** + * local_dec_and_test - decrement and test + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and + * returns true if the result is 0, or false for all + * other cases. + */ +#define local_dec_and_test(l) (local_dec_return(l) == 0) + +/** + * local_add_negative - add and test if negative + * @l: pointer of type local_t + * @i: integer value to add + * + * Atomically adds @i to @l and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define local_add_negative(i, l) (local_add_return((i), (l)) < 0) + +#define local_cmpxchg(l, o, n) (cmpxchg_local(&((l)->counter), (o), (n))) +#define local_xchg(v, new) (xchg_local(&((l)->counter), new)) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to l... + * @u: ...unless l is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +static inline int local_add_unless(local_t *l, long a, long u) +{ + long c, old; + c = local_read(l); + for (;;) { + if (unlikely(c == (u))) + break; + old = local_cmpxchg((l), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +static inline void local_clear_mask(unsigned long mask, local_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_clear_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + "ld %0, @%1; \n\t" + "and %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +static inline void local_set_mask(unsigned long mask, local_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_set_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + "ld %0, @%1; \n\t" + "or %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/* Atomic operations are already serializing on m32r */ +#define smp_mb__before_local_dec() barrier() +#define smp_mb__after_local_dec() barrier() +#define smp_mb__before_local_inc() barrier() +#define smp_mb__after_local_inc() barrier() + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i, l) ((l)->a.counter += (i)) +#define __local_sub(i, l) ((l)->a.counter -= (i)) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non local way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* __M32R_LOCAL_H */ diff --git a/arch/m32r/include/asm/m32102.h b/arch/m32r/include/asm/m32102.h new file mode 100644 index 000000000000..52807f8db166 --- /dev/null +++ b/arch/m32r/include/asm/m32102.h @@ -0,0 +1,314 @@ +#ifndef _M32102_H_ +#define _M32102_H_ + +/* + * Renesas M32R 32102 group + * + * Copyright (c) 2001 Hitoshi Yamamoto + * Copyright (c) 2003, 2004 Renesas Technology Corp. + */ + +/*======================================================================* + * Special Function Register + *======================================================================*/ +#if !defined(CONFIG_CHIP_M32104) +#define M32R_SFR_OFFSET (0x00E00000) /* 0x00E00000-0x00EFFFFF 1[MB] */ +#else +#define M32R_SFR_OFFSET (0x00700000) /* 0x00700000-0x007FFFFF 1[MB] */ +#endif + +/* + * Clock and Power Management registers. + */ +#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) + +#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) +#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) +#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) + +/* + * DMA Controller registers. + */ +#define M32R_DMA_OFFSET (0x000F8000+M32R_SFR_OFFSET) + +#define M32R_DMAEN_PORTL (0x000+M32R_DMA_OFFSET) +#define M32R_DMAISTS_PORTL (0x004+M32R_DMA_OFFSET) +#define M32R_DMAEDET_PORTL (0x008+M32R_DMA_OFFSET) +#define M32R_DMAASTS_PORTL (0x00c+M32R_DMA_OFFSET) + +#define M32R_DMA0CR0_PORTL (0x100+M32R_DMA_OFFSET) +#define M32R_DMA0CR1_PORTL (0x104+M32R_DMA_OFFSET) +#define M32R_DMA0CSA_PORTL (0x108+M32R_DMA_OFFSET) +#define M32R_DMA0RSA_PORTL (0x10c+M32R_DMA_OFFSET) +#define M32R_DMA0CDA_PORTL (0x110+M32R_DMA_OFFSET) +#define M32R_DMA0RDA_PORTL (0x114+M32R_DMA_OFFSET) +#define M32R_DMA0CBCUT_PORTL (0x118+M32R_DMA_OFFSET) +#define M32R_DMA0RBCUT_PORTL (0x11c+M32R_DMA_OFFSET) + +#define M32R_DMA1CR0_PORTL (0x200+M32R_DMA_OFFSET) +#define M32R_DMA1CR1_PORTL (0x204+M32R_DMA_OFFSET) +#define M32R_DMA1CSA_PORTL (0x208+M32R_DMA_OFFSET) +#define M32R_DMA1RSA_PORTL (0x20c+M32R_DMA_OFFSET) +#define M32R_DMA1CDA_PORTL (0x210+M32R_DMA_OFFSET) +#define M32R_DMA1RDA_PORTL (0x214+M32R_DMA_OFFSET) +#define M32R_DMA1CBCUT_PORTL (0x218+M32R_DMA_OFFSET) +#define M32R_DMA1RBCUT_PORTL (0x21c+M32R_DMA_OFFSET) + +/* + * Multi Function Timer registers. + */ +#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) + +#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ +#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ + +#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) +#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ +#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ +#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ +#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ +#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ + +#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) +#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ +#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ +#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ +#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ +#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ + +#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) +#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ +#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ +#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ +#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ +#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ + +#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) +#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ +#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ +#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ +#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ +#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ + +#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) +#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ +#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ +#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ +#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) +#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ +#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ +#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ +#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ + +#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \ + || defined(CONFIG_CHIP_M32104) +#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */ +#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */ +#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */ +#define M32R_MFTCR_MFT3MSK (1UL<<28) /* b3 */ +#define M32R_MFTCR_MFT4MSK (1UL<<27) /* b4 */ +#define M32R_MFTCR_MFT5MSK (1UL<<26) /* b5 */ +#define M32R_MFTCR_MFT0EN (1UL<<23) /* b8 */ +#define M32R_MFTCR_MFT1EN (1UL<<22) /* b9 */ +#define M32R_MFTCR_MFT2EN (1UL<<21) /* b10 */ +#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */ +#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */ +#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */ +#else +#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ +#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ +#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ +#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ +#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ +#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ +#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ +#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ +#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ +#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ +#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ +#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ +#endif + +#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ +#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ +#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ +#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ +#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ +#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ +#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ +#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ +#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ +#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ +#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ +#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ +#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ +#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ +#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ + +/* + * Serial I/O registers. + */ +#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) + +#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) +#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) +#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) +#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) +#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) +#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) +#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) + +/* + * Interrupt Control Unit registers. + */ +#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) +#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) +#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) +#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) +#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ +#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ +#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ +#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ +#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ +#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ +#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */ +#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */ +#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */ +#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */ +#define M32R_ICU_CR19_PORTL (0x248+M32R_ICU_OFFSET) /* MFT3 */ +#define M32R_ICU_CR20_PORTL (0x24C+M32R_ICU_OFFSET) /* MFT4 */ +#define M32R_ICU_CR21_PORTL (0x250+M32R_ICU_OFFSET) /* MFT5 */ +#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* DMA0 */ +#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* DMA1 */ +#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* SIO0 */ +#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* SIO0 */ +#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* SIO1 */ +#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* SIO1 */ +#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* SIO2 */ +#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* SIO2 */ +#define M32R_ICU_CR54_PORTL (0x2D4+M32R_ICU_OFFSET) /* SIO3 */ +#define M32R_ICU_CR55_PORTL (0x2D8+M32R_ICU_OFFSET) /* SIO3 */ +#define M32R_ICU_CR56_PORTL (0x2DC+M32R_ICU_OFFSET) /* SIO4 */ +#define M32R_ICU_CR57_PORTL (0x2E0+M32R_ICU_OFFSET) /* SIO4 */ + +#ifdef CONFIG_SMP +#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET) /* IPI0 */ +#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET) /* IPI1 */ +#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET) /* IPI2 */ +#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET) /* IPI3 */ +#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET) /* IPI4 */ +#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET) /* IPI5 */ +#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET) /* IPI6 */ +#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET) /* IPI7 */ +#endif /* CONFIG_SMP */ + +#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ +#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ +#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ +#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ +#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ +#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ +#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ +#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ + +#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ +#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ +#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ +#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ +#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ +#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ +#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ +#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ +#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ +#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ +#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ +#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ +#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ +#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ + +#define M32R_IRQ_INT0 (1) /* INT0 */ +#define M32R_IRQ_INT1 (2) /* INT1 */ +#define M32R_IRQ_INT2 (3) /* INT2 */ +#define M32R_IRQ_INT3 (4) /* INT3 */ +#define M32R_IRQ_INT4 (5) /* INT4 */ +#define M32R_IRQ_INT5 (6) /* INT5 */ +#define M32R_IRQ_INT6 (7) /* INT6 */ +#define M32R_IRQ_MFT0 (16) /* MFT0 */ +#define M32R_IRQ_MFT1 (17) /* MFT1 */ +#define M32R_IRQ_MFT2 (18) /* MFT2 */ +#define M32R_IRQ_MFT3 (19) /* MFT3 */ +#ifdef CONFIG_CHIP_M32104 +#define M32R_IRQ_MFTX0 (24) /* MFTX0 */ +#define M32R_IRQ_MFTX1 (25) /* MFTX1 */ +#define M32R_IRQ_DMA0 (32) /* DMA0 */ +#define M32R_IRQ_DMA1 (33) /* DMA1 */ +#define M32R_IRQ_DMA2 (34) /* DMA2 */ +#define M32R_IRQ_DMA3 (35) /* DMA3 */ +#define M32R_IRQ_SIO0_R (40) /* SIO0 send */ +#define M32R_IRQ_SIO0_S (41) /* SIO0 receive */ +#define M32R_IRQ_SIO1_R (42) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (43) /* SIO1 receive */ +#define M32R_IRQ_SIO2_R (44) /* SIO2 send */ +#define M32R_IRQ_SIO2_S (45) /* SIO2 receive */ +#define M32R_IRQ_SIO3_R (46) /* SIO3 send */ +#define M32R_IRQ_SIO3_S (47) /* SIO3 receive */ +#define M32R_IRQ_ADC (56) /* ADC */ +#define M32R_IRQ_PC (57) /* PC */ +#else /* ! M32104 */ +#define M32R_IRQ_DMA0 (32) /* DMA0 */ +#define M32R_IRQ_DMA1 (33) /* DMA1 */ +#define M32R_IRQ_SIO0_R (48) /* SIO0 send */ +#define M32R_IRQ_SIO0_S (49) /* SIO0 receive */ +#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ +#define M32R_IRQ_SIO2_R (52) /* SIO2 send */ +#define M32R_IRQ_SIO2_S (53) /* SIO2 receive */ +#define M32R_IRQ_SIO3_R (54) /* SIO3 send */ +#define M32R_IRQ_SIO3_S (55) /* SIO3 receive */ +#define M32R_IRQ_SIO4_R (56) /* SIO4 send */ +#define M32R_IRQ_SIO4_S (57) /* SIO4 receive */ +#endif /* ! M32104 */ + +#ifdef CONFIG_SMP +#define M32R_IRQ_IPI0 (56) +#define M32R_IRQ_IPI1 (57) +#define M32R_IRQ_IPI2 (58) +#define M32R_IRQ_IPI3 (59) +#define M32R_IRQ_IPI4 (60) +#define M32R_IRQ_IPI5 (61) +#define M32R_IRQ_IPI6 (62) +#define M32R_IRQ_IPI7 (63) +#define M32R_CPUID_PORTL (0xffffffe0) + +#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) + +#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME3_PORTL (0x1c+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID3_PORTL (0x2c+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) + +#endif /* CONFIG_SMP */ + +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long icucr; /* ICU Control Register */ +} icu_data_t; +#endif + +#endif /* _M32102_H_ */ diff --git a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h new file mode 100644 index 000000000000..2dc89d68b6d9 --- /dev/null +++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h @@ -0,0 +1,161 @@ +#ifndef _M32104UT_M32104UT_PLD_H +#define _M32104UT_M32104UT_PLD_H + +/* + * include/asm-m32r/m32104ut/m32104ut_pld.h + * + * Definitions for Programable Logic Device(PLD) on M32104UT board. + * Based on m32700ut_pld.h + * + * Copyright (c) 2002 Takeo Takahashi + * Copyright (c) 2005 Naoto Sugai + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#if defined(CONFIG_PLAT_M32104UT) +#define PLD_PLAT_BASE 0x02c00000 +#else +#error "no platform configuration" +#endif + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + */ + +#define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CDP 0x0001 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _M32104UT_M32104UT_PLD_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h new file mode 100644 index 000000000000..aae810a4fb2c --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h @@ -0,0 +1,103 @@ +#ifndef _M32700UT_M32700UT_LAN_H +#define _M32700UT_M32700UT_LAN_H + +/* + * include/asm-m32r/m32700ut/m32700ut_lan.h + * + * M32700UT-LAN board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define M32700UT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define M32700UT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#define M32700UT_LAN_IRQ_LAN (M32700UT_LAN_PLD_IRQ_BASE + 1) /* LAN */ +#define M32700UT_LAN_IRQ_I2C (M32700UT_LAN_PLD_IRQ_BASE + 3) /* I2C */ + +#define M32700UT_LAN_ICUISTS __reg16(M32700UT_LAN_BASE + 0xc0002) +#define M32700UT_LAN_ICUISTS_VECB_MASK (0xf000) +#define M32700UT_LAN_VECB(x) ((x) & M32700UT_LAN_ICUISTS_VECB_MASK) +#define M32700UT_LAN_ICUISTS_ISN_MASK (0x07c0) +#define M32700UT_LAN_ICUISTS_ISN(x) ((x) & M32700UT_LAN_ICUISTS_ISN_MASK) +#define M32700UT_LAN_ICUIREQ0 __reg16(M32700UT_LAN_BASE + 0xc0004) +#define M32700UT_LAN_ICUCR1 __reg16(M32700UT_LAN_BASE + 0xc0010) +#define M32700UT_LAN_ICUCR3 __reg16(M32700UT_LAN_BASE + 0xc0014) + +/* + * AR register on PLD + */ +#define ARVCR0 __reg32(M32700UT_LAN_BASE + 0x40000) +#define ARVCR0_VDS 0x00080000 +#define ARVCR0_RST 0x00010000 +#define ARVCR1 __reg32(M32700UT_LAN_BASE + 0x40004) +#define ARVCR1_QVGA 0x02000000 +#define ARVCR1_NORMAL 0x01000000 +#define ARVCR1_HIEN 0x00010000 +#define ARVHCOUNT __reg32(M32700UT_LAN_BASE + 0x40008) +#define ARDATA __reg32(M32700UT_LAN_BASE + 0x40010) +#define ARINTSEL __reg32(M32700UT_LAN_BASE + 0x40014) +#define ARINTSEL_INT3 0x10000000 /* CPU INT3 */ +#define ARDATA32 __reg32(M32700UT_LAN_BASE + 0x04040010) // Block 5 +/* +#define ARINTSEL_SEL2 0x00002000 +#define ARINTSEL_SEL3 0x00001000 +#define ARINTSEL_SEL6 0x00000200 +#define ARINTSEL_SEL7 0x00000100 +#define ARINTSEL_SEL9 0x00000040 +#define ARINTSEL_SEL10 0x00000020 +#define ARINTSEL_SEL11 0x00000010 +#define ARINTSEL_SEL12 0x00000008 +*/ + +/* + * I2C register on PLD + */ +#define PLDI2CCR __reg32(M32700UT_LAN_BASE + 0x40040) +#define PLDI2CCR_ES0 0x00000001 /* enable I2C interface */ +#define PLDI2CMOD __reg32(M32700UT_LAN_BASE + 0x40044) +#define PLDI2CMOD_ACKCLK 0x00000200 +#define PLDI2CMOD_DTWD 0x00000100 +#define PLDI2CMOD_10BT 0x00000004 +#define PLDI2CMOD_ATM_NORMAL 0x00000000 +#define PLDI2CMOD_ATM_AUTO 0x00000003 +#define PLDI2CACK __reg32(M32700UT_LAN_BASE + 0x40048) +#define PLDI2CACK_ACK 0x00000001 +#define PLDI2CFREQ __reg32(M32700UT_LAN_BASE + 0x4004c) +#define PLDI2CCND __reg32(M32700UT_LAN_BASE + 0x40050) +#define PLDI2CCND_START 0x00000001 +#define PLDI2CCND_STOP 0x00000002 +#define PLDI2CSTEN __reg32(M32700UT_LAN_BASE + 0x40054) +#define PLDI2CSTEN_STEN 0x00000001 +#define PLDI2CDATA __reg32(M32700UT_LAN_BASE + 0x40060) +#define PLDI2CSTS __reg32(M32700UT_LAN_BASE + 0x40064) +#define PLDI2CSTS_TRX 0x00000020 +#define PLDI2CSTS_BB 0x00000010 +#define PLDI2CSTS_NOACK 0x00000001 /* 0:ack, 1:noack */ + +#endif /* _M32700UT_M32700UT_LAN_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h new file mode 100644 index 000000000000..4c2489079788 --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h @@ -0,0 +1,55 @@ +#ifndef _M32700UT_M32700UT_LCD_H +#define _M32700UT_M32700UT_LCD_H + +/* + * include/asm-m32r/m32700ut/m32700ut_lcd.h + * + * M32700UT-LCD board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define M32700UT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define M32700UT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* + * ICU + */ +#define M32700UT_LCD_IRQ_BAT_INT (M32700UT_LCD_PLD_IRQ_BASE + 1) +#define M32700UT_LCD_IRQ_USB_INT1 (M32700UT_LCD_PLD_IRQ_BASE + 2) +#define M32700UT_LCD_IRQ_AUDT0 (M32700UT_LCD_PLD_IRQ_BASE + 3) +#define M32700UT_LCD_IRQ_AUDT2 (M32700UT_LCD_PLD_IRQ_BASE + 4) +#define M32700UT_LCD_IRQ_BATSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 16) +#define M32700UT_LCD_IRQ_BATSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 17) +#define M32700UT_LCD_IRQ_ASNDSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 18) +#define M32700UT_LCD_IRQ_ASNDSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 19) +#define M32700UT_LCD_IRQ_ACNLSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 21) + +#define M32700UT_LCD_ICUISTS __reg16(M32700UT_LCD_BASE + 0x300002) +#define M32700UT_LCD_ICUISTS_VECB_MASK (0xf000) +#define M32700UT_LCD_VECB(x) ((x) & M32700UT_LCD_ICUISTS_VECB_MASK) +#define M32700UT_LCD_ICUISTS_ISN_MASK (0x07c0) +#define M32700UT_LCD_ICUISTS_ISN(x) ((x) & M32700UT_LCD_ICUISTS_ISN_MASK) +#define M32700UT_LCD_ICUIREQ0 __reg16(M32700UT_LCD_BASE + 0x300004) +#define M32700UT_LCD_ICUIREQ1 __reg16(M32700UT_LCD_BASE + 0x300006) +#define M32700UT_LCD_ICUCR1 __reg16(M32700UT_LCD_BASE + 0x300020) +#define M32700UT_LCD_ICUCR2 __reg16(M32700UT_LCD_BASE + 0x300022) +#define M32700UT_LCD_ICUCR3 __reg16(M32700UT_LCD_BASE + 0x300024) +#define M32700UT_LCD_ICUCR4 __reg16(M32700UT_LCD_BASE + 0x300026) +#define M32700UT_LCD_ICUCR16 __reg16(M32700UT_LCD_BASE + 0x300030) +#define M32700UT_LCD_ICUCR17 __reg16(M32700UT_LCD_BASE + 0x300032) +#define M32700UT_LCD_ICUCR18 __reg16(M32700UT_LCD_BASE + 0x300034) +#define M32700UT_LCD_ICUCR19 __reg16(M32700UT_LCD_BASE + 0x300036) +#define M32700UT_LCD_ICUCR21 __reg16(M32700UT_LCD_BASE + 0x30003a) + +#endif /* _M32700UT_M32700UT_LCD_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h new file mode 100644 index 000000000000..57623beb44cb --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h @@ -0,0 +1,259 @@ +#ifndef _M32700UT_M32700UT_PLD_H +#define _M32700UT_M32700UT_PLD_H + +/* + * include/asm-m32r/m32700ut/m32700ut_pld.h + * + * Definitions for Programable Logic Device(PLD) on M32700UT board. + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV) +#define PLD_PLAT_BASE 0x04c00000 +#else +#error "no platform configuration" +#endif + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) +#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#if !defined(CONFIG_PLAT_USRV) +#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CFIREQ (M32700UT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (M32700UT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (M32700UT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (M32700UT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_INT7 (M32700UT_PLD_IRQ_BASE + 7) /* reserved */ +#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_MMCCARD (M32700UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_INT12 (M32700UT_PLD_IRQ_BASE + 12) /* reserved */ +#define PLD_IRQ_SC_ERROR (M32700UT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (M32700UT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (M32700UT_PLD_IRQ_BASE + 15) /* SC send */ +#define PLD_IRQ_SIO0_RCV (M32700UT_PLD_IRQ_BASE + 16) /* SIO receive */ +#define PLD_IRQ_SIO0_SND (M32700UT_PLD_IRQ_BASE + 17) /* SIO send */ +#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ +#define PLD_IRQ_INT31 (M32700UT_PLD_IRQ_BASE + 31) /* reserved */ + +#else /* CONFIG_PLAT_USRV */ + +#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CF0 (M32700UT_PLD_IRQ_BASE + 3) /* CF0# */ +#define PLD_IRQ_CF1 (M32700UT_PLD_IRQ_BASE + 4) /* CF1# */ +#define PLD_IRQ_CF2 (M32700UT_PLD_IRQ_BASE + 5) /* CF2# */ +#define PLD_IRQ_CF3 (M32700UT_PLD_IRQ_BASE + 6) /* CF3# */ +#define PLD_IRQ_CF4 (M32700UT_PLD_IRQ_BASE + 7) /* CF4# */ +#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_INT11 (M32700UT_PLD_IRQ_BASE + 11) /* reserved */ +#define PLD_IRQ_UART0 (M32700UT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ +#define PLD_IRQ_UART1 (M32700UT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ +#define PLD_IRQ_INT14 (M32700UT_PLD_IRQ_BASE + 14) /* reserved */ +#define PLD_IRQ_INT15 (M32700UT_PLD_IRQ_BASE + 15) /* reserved */ +#define PLD_IRQ_SNDINT (M32700UT_PLD_IRQ_BASE + 16) /* SNDINT# */ +#define PLD_IRQ_INT17 (M32700UT_PLD_IRQ_BASE + 17) /* reserved */ +#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ + +#endif /* CONFIG_PLAT_USRV */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) +#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) +#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) +#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) +#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) +#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) +#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) +#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CF 0x0001 +#define PLD_CPCR_MMC 0x0002 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _M32700UT_M32700UT_PLD.H */ diff --git a/arch/m32r/include/asm/m32r.h b/arch/m32r/include/asm/m32r.h new file mode 100644 index 000000000000..214b44b40757 --- /dev/null +++ b/arch/m32r/include/asm/m32r.h @@ -0,0 +1,160 @@ +#ifndef _ASM_M32R_M32R_H_ +#define _ASM_M32R_M32R_H_ + +/* + * Renesas M32R processor + * + * Copyright (C) 2003, 2004 Renesas Technology Corp. + */ + + +/* Chip type */ +#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP) +#include <asm/m32r_mp_fpga.h> +#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ + || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \ + || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) +#include <asm/m32102.h> +#endif + +/* Platform type */ +#if defined(CONFIG_PLAT_M32700UT) +#include <asm/m32700ut/m32700ut_pld.h> +#include <asm/m32700ut/m32700ut_lan.h> +#include <asm/m32700ut/m32700ut_lcd.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_M32700UT */ + +#if defined(CONFIG_PLAT_OPSPUT) +#include <asm/opsput/opsput_pld.h> +#include <asm/opsput/opsput_lan.h> +#include <asm/opsput/opsput_lcd.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_OPSPUT */ + +#if defined(CONFIG_PLAT_MAPPI2) +#include <asm/mappi2/mappi2_pld.h> +#endif /* CONFIG_PLAT_MAPPI2 */ + +#if defined(CONFIG_PLAT_MAPPI3) +#include <asm/mappi3/mappi3_pld.h> +#endif /* CONFIG_PLAT_MAPPI3 */ + +#if defined(CONFIG_PLAT_USRV) +#include <asm/m32700ut/m32700ut_pld.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE +#endif + +#if defined(CONFIG_PLAT_M32104UT) +#include <asm/m32104ut/m32104ut_pld.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_M32104 */ + +/* + * M32R Register + */ + +/* + * MMU Register + */ + +#define MMU_REG_BASE (0xffff0000) +#define ITLB_BASE (0xfe000000) +#define DTLB_BASE (0xfe000800) + +#define NR_TLB_ENTRIES CONFIG_TLB_ENTRIES + +#define MATM MMU_REG_BASE /* MMU Address Translation Mode + Register */ +#define MPSZ (0x04 + MMU_REG_BASE) /* MMU Page Size Designation Register */ +#define MASID (0x08 + MMU_REG_BASE) /* MMU Address Space ID Register */ +#define MESTS (0x0c + MMU_REG_BASE) /* MMU Exception Status Register */ +#define MDEVA (0x10 + MMU_REG_BASE) /* MMU Operand Exception Virtual + Address Register */ +#define MDEVP (0x14 + MMU_REG_BASE) /* MMU Operand Exception Virtual Page + Number Register */ +#define MPTB (0x18 + MMU_REG_BASE) /* MMU Page Table Base Register */ +#define MSVA (0x20 + MMU_REG_BASE) /* MMU Search Virtual Address + Register */ +#define MTOP (0x24 + MMU_REG_BASE) /* MMU TLB Operation Register */ +#define MIDXI (0x28 + MMU_REG_BASE) /* MMU Index Register for + Instruciton */ +#define MIDXD (0x2c + MMU_REG_BASE) /* MMU Index Register for Operand */ + +#define MATM_offset (MATM - MMU_REG_BASE) +#define MPSZ_offset (MPSZ - MMU_REG_BASE) +#define MASID_offset (MASID - MMU_REG_BASE) +#define MESTS_offset (MESTS - MMU_REG_BASE) +#define MDEVA_offset (MDEVA - MMU_REG_BASE) +#define MDEVP_offset (MDEVP - MMU_REG_BASE) +#define MPTB_offset (MPTB - MMU_REG_BASE) +#define MSVA_offset (MSVA - MMU_REG_BASE) +#define MTOP_offset (MTOP - MMU_REG_BASE) +#define MIDXI_offset (MIDXI - MMU_REG_BASE) +#define MIDXD_offset (MIDXD - MMU_REG_BASE) + +#define MESTS_IT (1 << 0) /* Instruction TLB miss */ +#define MESTS_IA (1 << 1) /* Instruction Access Exception */ +#define MESTS_DT (1 << 4) /* Operand TLB miss */ +#define MESTS_DA (1 << 5) /* Operand Access Exception */ +#define MESTS_DRW (1 << 6) /* Operand Write Exception Flag */ + +/* + * PSW (Processor Status Word) + */ + +/* PSW bit */ +#define M32R_PSW_BIT_SM (7) /* Stack Mode */ +#define M32R_PSW_BIT_IE (6) /* Interrupt Enable */ +#define M32R_PSW_BIT_PM (3) /* Processor Mode [0:Supervisor,1:User] */ +#define M32R_PSW_BIT_C (0) /* Condition */ +#define M32R_PSW_BIT_BSM (7+8) /* Backup Stack Mode */ +#define M32R_PSW_BIT_BIE (6+8) /* Backup Interrupt Enable */ +#define M32R_PSW_BIT_BPM (3+8) /* Backup Processor Mode */ +#define M32R_PSW_BIT_BC (0+8) /* Backup Condition */ + +/* PSW bit map */ +#define M32R_PSW_SM (1UL<< M32R_PSW_BIT_SM) /* Stack Mode */ +#define M32R_PSW_IE (1UL<< M32R_PSW_BIT_IE) /* Interrupt Enable */ +#define M32R_PSW_PM (1UL<< M32R_PSW_BIT_PM) /* Processor Mode */ +#define M32R_PSW_C (1UL<< M32R_PSW_BIT_C) /* Condition */ +#define M32R_PSW_BSM (1UL<< M32R_PSW_BIT_BSM) /* Backup Stack Mode */ +#define M32R_PSW_BIE (1UL<< M32R_PSW_BIT_BIE) /* Backup Interrupt Enable */ +#define M32R_PSW_BPM (1UL<< M32R_PSW_BIT_BPM) /* Backup Processor Mode */ +#define M32R_PSW_BC (1UL<< M32R_PSW_BIT_BC) /* Backup Condition */ + +/* + * Direct address to SFR + */ + +#include <asm/page.h> +#ifdef CONFIG_MMU +#define NONCACHE_OFFSET (__PAGE_OFFSET + 0x20000000) +#else +#define NONCACHE_OFFSET __PAGE_OFFSET +#endif /* CONFIG_MMU */ + +#define M32R_ICU_ISTS_ADDR M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET +#define M32R_ICU_IPICR_ADDR M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET +#define M32R_ICU_IMASK_ADDR M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_CPU_NAME_ADDR M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_MODEL_ID_ADDR M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_VERSION_ADDR M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET + +#endif /* _ASM_M32R_M32R_H_ */ diff --git a/arch/m32r/include/asm/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h new file mode 100644 index 000000000000..976d2b995919 --- /dev/null +++ b/arch/m32r/include/asm/m32r_mp_fpga.h @@ -0,0 +1,313 @@ +#ifndef _ASM_M32R_M32R_MP_FPGA_ +#define _ASM_M32R_M32R_MP_FPGA_ + +/* + * Renesas M32R-MP-FPGA + * + * Copyright (c) 2002 Hitoshi Yamamoto + * Copyright (c) 2003, 2004 Renesas Technology Corp. + */ + +/* + * ======================================================== + * M32R-MP-FPGA Memory Map + * ======================================================== + * 0x00000000 : Block#0 : 64[MB] + * 0x03E00000 : SFR + * 0x03E00000 : reserved + * 0x03EF0000 : FPGA + * 0x03EF1000 : reserved + * 0x03EF4000 : CKM + * 0x03EF4000 : BSELC + * 0x03EF5000 : reserved + * 0x03EFC000 : MFT + * 0x03EFD000 : SIO + * 0x03EFE000 : reserved + * 0x03EFF000 : ICU + * 0x03F00000 : Internal SRAM 64[KB] + * 0x03F10000 : reserved + * -------------------------------------------------------- + * 0x04000000 : Block#1 : 64[MB] + * 0x04000000 : Debug board SRAM 4[MB] + * 0x04400000 : reserved + * -------------------------------------------------------- + * 0x08000000 : Block#2 : 64[MB] + * -------------------------------------------------------- + * 0x0C000000 : Block#3 : 64[MB] + * -------------------------------------------------------- + * 0x10000000 : Block#4 : 64[MB] + * -------------------------------------------------------- + * 0x14000000 : Block#5 : 64[MB] + * -------------------------------------------------------- + * 0x18000000 : Block#6 : 64[MB] + * -------------------------------------------------------- + * 0x1C000000 : Block#7 : 64[MB] + * -------------------------------------------------------- + * 0xFE000000 : TLB + * 0xFE000000 : ITLB + * 0xFE000080 : reserved + * 0xFE000800 : DTLB + * 0xFE000880 : reserved + * -------------------------------------------------------- + * 0xFF000000 : System area + * 0xFFFF0000 : MMU + * 0xFFFF0030 : reserved + * 0xFFFF8000 : Debug function + * 0xFFFFA000 : reserved + * 0xFFFFC000 : CPU control + * 0xFFFFFFFF + * ======================================================== + */ + +/*======================================================================* + * Special Function Register + *======================================================================*/ +#define M32R_SFR_OFFSET (0x00E00000) /* 0x03E00000-0x03EFFFFF 1[MB] */ + +/* + * FPGA registers. + */ +#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) + +#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME3_PORTL (0x1C+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID3_PORTL (0x2C+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) + +/* + * Clock and Power Manager registers. + */ +#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) + +#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) +#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) +#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) + +/* + * Block SELect Controller registers. + */ +#define M32R_BSELC_OFFSET (0x000F5000+M32R_SFR_OFFSET) + +#define M32R_BSEL0_CR0_PORTL (0x000+M32R_BSELC_OFFSET) +#define M32R_BSEL0_CR1_PORTL (0x004+M32R_BSELC_OFFSET) +#define M32R_BSEL1_CR0_PORTL (0x100+M32R_BSELC_OFFSET) +#define M32R_BSEL1_CR1_PORTL (0x104+M32R_BSELC_OFFSET) +#define M32R_BSEL2_CR0_PORTL (0x200+M32R_BSELC_OFFSET) +#define M32R_BSEL2_CR1_PORTL (0x204+M32R_BSELC_OFFSET) +#define M32R_BSEL3_CR0_PORTL (0x300+M32R_BSELC_OFFSET) +#define M32R_BSEL3_CR1_PORTL (0x304+M32R_BSELC_OFFSET) +#define M32R_BSEL4_CR0_PORTL (0x400+M32R_BSELC_OFFSET) +#define M32R_BSEL4_CR1_PORTL (0x404+M32R_BSELC_OFFSET) +#define M32R_BSEL5_CR0_PORTL (0x500+M32R_BSELC_OFFSET) +#define M32R_BSEL5_CR1_PORTL (0x504+M32R_BSELC_OFFSET) +#define M32R_BSEL6_CR0_PORTL (0x600+M32R_BSELC_OFFSET) +#define M32R_BSEL6_CR1_PORTL (0x604+M32R_BSELC_OFFSET) +#define M32R_BSEL7_CR0_PORTL (0x700+M32R_BSELC_OFFSET) +#define M32R_BSEL7_CR1_PORTL (0x704+M32R_BSELC_OFFSET) + +/* + * Multi Function Timer registers. + */ +#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) + +#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ +#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ + +#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) +#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ +#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ +#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ +#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ +#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ + +#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) +#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ +#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ +#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ +#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ +#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ + +#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) +#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ +#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ +#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ +#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ +#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ + +#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) +#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ +#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ +#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ +#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ +#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ + +#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) +#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ +#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ +#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ +#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) +#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ +#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ +#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ +#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ +#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ +#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ +#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ +#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ +#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ +#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ +#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ +#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ +#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ +#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ +#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ + +#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ +#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ +#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ +#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ +#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ +#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ +#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ +#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ +#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ +#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ +#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ +#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ +#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ +#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ +#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ + +/* + * Serial I/O registers. + */ +#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) + +#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) +#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) +#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) +#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) +#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) +#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) +#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) + +/* + * Interrupt Control Unit registers. + */ +#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) + +#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) +#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) +#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) +#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ +#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ +#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ +#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ +#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ +#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ +#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x218+M32R_ICU_OFFSET) /* INT7 */ +#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* SIO0 RX */ +#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* SIO0 TX */ +#define M32R_ICU_CR40_PORTL (0x29C+M32R_ICU_OFFSET) /* DMAC0 */ +#define M32R_ICU_CR41_PORTL (0x2A0+M32R_ICU_OFFSET) /* DMAC1 */ +#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* MFT0 */ +#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* MFT1 */ +#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* MFT2 */ +#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* MFT3 */ +#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* MFT4 */ +#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* MFT5 */ +#define M32R_ICU_IPICR0_PORTL (0x2DC+M32R_ICU_OFFSET) /* IPI0 */ +#define M32R_ICU_IPICR1_PORTL (0x2E0+M32R_ICU_OFFSET) /* IPI1 */ +#define M32R_ICU_IPICR2_PORTL (0x2E4+M32R_ICU_OFFSET) /* IPI2 */ +#define M32R_ICU_IPICR3_PORTL (0x2E8+M32R_ICU_OFFSET) /* IPI3 */ +#define M32R_ICU_IPICR4_PORTL (0x2EC+M32R_ICU_OFFSET) /* IPI4 */ +#define M32R_ICU_IPICR5_PORTL (0x2F0+M32R_ICU_OFFSET) /* IPI5 */ +#define M32R_ICU_IPICR6_PORTL (0x2F4+M32R_ICU_OFFSET) /* IPI6 */ +#define M32R_ICU_IPICR7_PORTL (0x2FC+M32R_ICU_OFFSET) /* IPI7 */ + +#define M32R_ICUISTS_VECB(val) ((val>>28) & 0xF) +#define M32R_ICUISTS_ISN(val) ((val>>22) & 0x3F) +#define M32R_ICUISTS_PIML(val) ((val>>16) & 0x7) + +#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ +#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ +#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ +#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ +#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ +#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ +#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ +#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ + +#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ +#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ +#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ +#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ +#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ +#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ +#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ +#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ +#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ +#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ +#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ +#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ +#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ +#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ +#define M32R_ICUCR_ILEVEL_MASK (7UL) + +#define M32R_IRQ_INT0 (1) /* INT0 */ +#define M32R_IRQ_INT1 (2) /* INT1 */ +#define M32R_IRQ_INT2 (3) /* INT2 */ +#define M32R_IRQ_INT3 (4) /* INT3 */ +#define M32R_IRQ_INT4 (5) /* INT4 */ +#define M32R_IRQ_INT5 (6) /* INT5 */ +#define M32R_IRQ_INT6 (7) /* INT6 */ +#define M32R_IRQ_INT7 (8) /* INT7 */ +#define M32R_IRQ_MFT0 (16) /* MFT0 */ +#define M32R_IRQ_MFT1 (17) /* MFT1 */ +#define M32R_IRQ_MFT2 (18) /* MFT2 */ +#define M32R_IRQ_MFT3 (19) /* MFT3 */ +#define M32R_IRQ_MFT4 (20) /* MFT4 */ +#define M32R_IRQ_MFT5 (21) /* MFT5 */ +#define M32R_IRQ_DMAC0 (32) /* DMAC0 */ +#define M32R_IRQ_DMAC1 (33) /* DMAC1 */ +#define M32R_IRQ_SIO0_R (48) /* SIO0 receive */ +#define M32R_IRQ_SIO0_S (49) /* SIO0 send */ +#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ +#define M32R_IRQ_IPI0 (56) /* IPI0 */ +#define M32R_IRQ_IPI1 (57) /* IPI1 */ +#define M32R_IRQ_IPI2 (58) /* IPI2 */ +#define M32R_IRQ_IPI3 (59) /* IPI3 */ +#define M32R_IRQ_IPI4 (60) /* IPI4 */ +#define M32R_IRQ_IPI5 (61) /* IPI5 */ +#define M32R_IRQ_IPI6 (62) /* IPI6 */ +#define M32R_IRQ_IPI7 (63) /* IPI7 */ + +/*======================================================================* + * CPU + *======================================================================*/ + +#define M32R_CPUID_PORTL (0xFFFFFFE0) +#define M32R_MCICAR_PORTL (0xFFFFFFF0) +#define M32R_MCDCAR_PORTL (0xFFFFFFF4) +#define M32R_MCCR_PORTL (0xFFFFFFFC) + +#endif /* _ASM_M32R_M32R_MP_FPGA_ */ diff --git a/arch/m32r/include/asm/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h new file mode 100644 index 000000000000..2624c9db7255 --- /dev/null +++ b/arch/m32r/include/asm/mappi2/mappi2_pld.h @@ -0,0 +1,150 @@ +#ifndef _MAPPI2_PLD_H +#define _MAPPI2_PLD_H + +/* + * include/asm-m32r/mappi2/mappi2_pld.h + * + * Definitions for Extended IO Logic on MAPPI2 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x10c00000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + + +/*==== ICU ====*/ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#if 1 +#define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ +#else +#define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */ +#define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */ +#endif + + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +#endif /* _MAPPI2_PLD.H */ diff --git a/arch/m32r/include/asm/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h new file mode 100644 index 000000000000..451c40ee70af --- /dev/null +++ b/arch/m32r/include/asm/mappi3/mappi3_pld.h @@ -0,0 +1,142 @@ +#ifndef _MAPPI3_PLD_H +#define _MAPPI3_PLD_H + +/* + * include/asm-m32r/mappi3/mappi3_pld.h + * + * Definitions for Extended IO Logic on MAPPI3 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + +/* ICU */ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */ +#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +/* Reset Control */ +#define PLD_REBOOT __reg16(PLD_BASE + 0x38000) + +#endif /* _MAPPI3_PLD.H */ diff --git a/arch/m32r/include/asm/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..aa1b7bf84f51 --- /dev/null +++ b/arch/m32r/include/asm/mc146818rtc.h @@ -0,0 +1,29 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include <asm/io.h> + +#ifndef RTC_PORT +#define RTC_PORT(x) ((x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#define RTC_IRQ 8 + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h new file mode 100644 index 000000000000..516a8973b130 --- /dev/null +++ b/arch/m32r/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __M32R_MMAN_H__ +#define __M32R_MMAN_H__ + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __M32R_MMAN_H__ */ diff --git a/arch/m32r/include/asm/mmu.h b/arch/m32r/include/asm/mmu.h new file mode 100644 index 000000000000..150cb92bb666 --- /dev/null +++ b/arch/m32r/include/asm/mmu.h @@ -0,0 +1,21 @@ +#ifndef _ASM_M32R_MMU_H +#define _ASM_M32R_MMU_H + +#if !defined(CONFIG_MMU) + +typedef struct { + unsigned long end_brk; +} mm_context_t; + +#else /* CONFIG_MMU */ + +/* Default "unsigned long" context */ +#ifndef CONFIG_SMP +typedef unsigned long mm_context_t; +#else +typedef unsigned long mm_context_t[NR_CPUS]; +#endif + +#endif /* CONFIG_MMU */ + +#endif /* _ASM_M32R_MMU_H */ diff --git a/arch/m32r/include/asm/mmu_context.h b/arch/m32r/include/asm/mmu_context.h new file mode 100644 index 000000000000..91909e5dd9d0 --- /dev/null +++ b/arch/m32r/include/asm/mmu_context.h @@ -0,0 +1,164 @@ +#ifndef _ASM_M32R_MMU_CONTEXT_H +#define _ASM_M32R_MMU_CONTEXT_H +#ifdef __KERNEL__ + +#include <asm/m32r.h> + +#define MMU_CONTEXT_ASID_MASK (0x000000FF) +#define MMU_CONTEXT_VERSION_MASK (0xFFFFFF00) +#define MMU_CONTEXT_FIRST_VERSION (0x00000100) +#define NO_CONTEXT (0x00000000) + +#ifndef __ASSEMBLY__ + +#include <asm/atomic.h> +#include <asm/pgalloc.h> +#include <asm/mmu.h> +#include <asm/tlbflush.h> +#include <asm-generic/mm_hooks.h> + +/* + * Cache of MMU context last used. + */ +#ifndef CONFIG_SMP +extern unsigned long mmu_context_cache_dat; +#define mmu_context_cache mmu_context_cache_dat +#define mm_context(mm) mm->context +#else /* not CONFIG_SMP */ +extern unsigned long mmu_context_cache_dat[]; +#define mmu_context_cache mmu_context_cache_dat[smp_processor_id()] +#define mm_context(mm) mm->context[smp_processor_id()] +#endif /* not CONFIG_SMP */ + +#define set_tlb_tag(entry, tag) (*entry = (tag & PAGE_MASK)|get_asid()) +#define set_tlb_data(entry, data) (*entry = (data | _PAGE_PRESENT)) + +#ifdef CONFIG_MMU +#define enter_lazy_tlb(mm, tsk) do { } while (0) + +static inline void get_new_mmu_context(struct mm_struct *mm) +{ + unsigned long mc = ++mmu_context_cache; + + if (!(mc & MMU_CONTEXT_ASID_MASK)) { + /* We exhaust ASID of this version. + Flush all TLB and start new cycle. */ + local_flush_tlb_all(); + /* Fix version if needed. + Note that we avoid version #0 to distingush NO_CONTEXT. */ + if (!mc) + mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; + } + mm_context(mm) = mc; +} + +/* + * Get MMU context if needed. + */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + if (mm) { + unsigned long mc = mmu_context_cache; + + /* Check if we have old version of context. + If it's old, we need to get new context with new version. */ + if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK) + get_new_mmu_context(mm); + } +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ +#ifndef CONFIG_SMP + mm->context = NO_CONTEXT; +#else /* CONFIG_SMP */ + int num_cpus = num_online_cpus(); + int i; + + for (i = 0 ; i < num_cpus ; i++) + mm->context[i] = NO_CONTEXT; +#endif /* CONFIG_SMP */ + + return 0; +} + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +#define destroy_context(mm) do { } while (0) + +static inline void set_asid(unsigned long asid) +{ + *(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + asid = *(volatile long *)MASID; + asid &= MMU_CONTEXT_ASID_MASK; + + return asid; +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm) +{ + get_mmu_context(mm); + set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, struct task_struct *tsk) +{ +#ifdef CONFIG_SMP + int cpu = smp_processor_id(); +#endif /* CONFIG_SMP */ + + if (prev != next) { +#ifdef CONFIG_SMP + cpu_set(cpu, next->cpu_vm_mask); +#endif /* CONFIG_SMP */ + /* Set MPTB = next->pgd */ + *(volatile unsigned long *)MPTB = (unsigned long)next->pgd; + activate_context(next); + } +#ifdef CONFIG_SMP + else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next); +#endif /* CONFIG_SMP */ +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +#define activate_mm(prev, next) \ + switch_mm((prev), (next), NULL) + +#else /* not CONFIG_MMU */ +#define get_mmu_context(mm) do { } while (0) +#define init_new_context(tsk,mm) (0) +#define destroy_context(mm) do { } while (0) +#define set_asid(asid) do { } while (0) +#define get_asid() (0) +#define activate_context(mm) do { } while (0) +#define switch_mm(prev,next,tsk) do { } while (0) +#define deactivate_mm(mm,tsk) do { } while (0) +#define activate_mm(prev,next) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) +#endif /* not CONFIG_MMU */ + +#endif /* not __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_MMU_CONTEXT_H */ diff --git a/arch/m32r/include/asm/mmzone.h b/arch/m32r/include/asm/mmzone.h new file mode 100644 index 000000000000..9f3b5accda88 --- /dev/null +++ b/arch/m32r/include/asm/mmzone.h @@ -0,0 +1,59 @@ +/* + * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 + * + */ + +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include <asm/smp.h> + +#ifdef CONFIG_DISCONTIGMEM + +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) \ +({ \ + pg_data_t *__pgdat = NODE_DATA(nid); \ + __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \ +}) + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) +/* + * pfn_valid should be made as fast as possible, and the current definition + * is valid for machines that are NUMA, but still contiguous, which is what + * is currently supported. A more generalised, but slower definition would + * be something like this - mbligh: + * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) ) + */ +#if 1 /* M32R_FIXME */ +#define pfn_valid(pfn) (1) +#else +#define pfn_valid(pfn) ((pfn) < num_physpages) +#endif + +/* + * generic node memory support, the following assumptions apply: + */ + +static __inline__ int pfn_to_nid(unsigned long pfn) +{ + int node; + + for (node = 0 ; node < MAX_NUMNODES ; node++) + if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node)) + break; + + return node; +} + +static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return(NODE_DATA(pfn_to_nid(pfn))); +} + +#endif /* CONFIG_DISCONTIGMEM */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/m32r/include/asm/module.h b/arch/m32r/include/asm/module.h new file mode 100644 index 000000000000..eb73ee011215 --- /dev/null +++ b/arch/m32r/include/asm/module.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_MODULE_H +#define _ASM_M32R_MODULE_H + +struct mod_arch_specific { }; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* _ASM_M32R_MODULE_H */ diff --git a/arch/m32r/include/asm/msgbuf.h b/arch/m32r/include/asm/msgbuf.h new file mode 100644 index 000000000000..0d5a877b813e --- /dev/null +++ b/arch/m32r/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASM_M32R_MSGBUF_H +#define _ASM_M32R_MSGBUF_H + +/* + * The msqid64_ds structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_M32R_MSGBUF_H */ diff --git a/arch/m32r/include/asm/mutex.h b/arch/m32r/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/m32r/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/m32r/include/asm/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h new file mode 100644 index 000000000000..a5f18dd1ab20 --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_lan.h @@ -0,0 +1,52 @@ +#ifndef _OPSPUT_OPSPUT_LAN_H +#define _OPSPUT_OPSPUT_LAN_H + +/* + * include/asm-m32r/opsput/opsput_lan.h + * + * OPSPUT-LAN board + * + * Copyright (c) 2002-2004 Takeo Takahashi, Mamoru Sakugawa + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define OPSPUT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define OPSPUT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#define OPSPUT_LAN_IRQ_LAN (OPSPUT_LAN_PLD_IRQ_BASE + 1) /* LAN */ +#define OPSPUT_LAN_IRQ_I2C (OPSPUT_LAN_PLD_IRQ_BASE + 3) /* I2C */ + +#define OPSPUT_LAN_ICUISTS __reg16(OPSPUT_LAN_BASE + 0xc0002) +#define OPSPUT_LAN_ICUISTS_VECB_MASK (0xf000) +#define OPSPUT_LAN_VECB(x) ((x) & OPSPUT_LAN_ICUISTS_VECB_MASK) +#define OPSPUT_LAN_ICUISTS_ISN_MASK (0x07c0) +#define OPSPUT_LAN_ICUISTS_ISN(x) ((x) & OPSPUT_LAN_ICUISTS_ISN_MASK) +#define OPSPUT_LAN_ICUIREQ0 __reg16(OPSPUT_LAN_BASE + 0xc0004) +#define OPSPUT_LAN_ICUCR1 __reg16(OPSPUT_LAN_BASE + 0xc0010) +#define OPSPUT_LAN_ICUCR3 __reg16(OPSPUT_LAN_BASE + 0xc0014) + +#endif /* _OPSPUT_OPSPUT_LAN_H */ diff --git a/arch/m32r/include/asm/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h new file mode 100644 index 000000000000..369c9f0832a6 --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_lcd.h @@ -0,0 +1,55 @@ +#ifndef _OPSPUT_OPSPUT_LCD_H +#define _OPSPUT_OPSPUT_LCD_H + +/* + * include/asm-m32r/opsput/opsput_lcd.h + * + * OPSPUT-LCD board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define OPSPUT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define OPSPUT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* + * ICU + */ +#define OPSPUT_LCD_IRQ_BAT_INT (OPSPUT_LCD_PLD_IRQ_BASE + 1) +#define OPSPUT_LCD_IRQ_USB_INT1 (OPSPUT_LCD_PLD_IRQ_BASE + 2) +#define OPSPUT_LCD_IRQ_AUDT0 (OPSPUT_LCD_PLD_IRQ_BASE + 3) +#define OPSPUT_LCD_IRQ_AUDT2 (OPSPUT_LCD_PLD_IRQ_BASE + 4) +#define OPSPUT_LCD_IRQ_BATSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 16) +#define OPSPUT_LCD_IRQ_BATSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 17) +#define OPSPUT_LCD_IRQ_ASNDSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 18) +#define OPSPUT_LCD_IRQ_ASNDSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 19) +#define OPSPUT_LCD_IRQ_ACNLSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 21) + +#define OPSPUT_LCD_ICUISTS __reg16(OPSPUT_LCD_BASE + 0x300002) +#define OPSPUT_LCD_ICUISTS_VECB_MASK (0xf000) +#define OPSPUT_LCD_VECB(x) ((x) & OPSPUT_LCD_ICUISTS_VECB_MASK) +#define OPSPUT_LCD_ICUISTS_ISN_MASK (0x07c0) +#define OPSPUT_LCD_ICUISTS_ISN(x) ((x) & OPSPUT_LCD_ICUISTS_ISN_MASK) +#define OPSPUT_LCD_ICUIREQ0 __reg16(OPSPUT_LCD_BASE + 0x300004) +#define OPSPUT_LCD_ICUIREQ1 __reg16(OPSPUT_LCD_BASE + 0x300006) +#define OPSPUT_LCD_ICUCR1 __reg16(OPSPUT_LCD_BASE + 0x300020) +#define OPSPUT_LCD_ICUCR2 __reg16(OPSPUT_LCD_BASE + 0x300022) +#define OPSPUT_LCD_ICUCR3 __reg16(OPSPUT_LCD_BASE + 0x300024) +#define OPSPUT_LCD_ICUCR4 __reg16(OPSPUT_LCD_BASE + 0x300026) +#define OPSPUT_LCD_ICUCR16 __reg16(OPSPUT_LCD_BASE + 0x300030) +#define OPSPUT_LCD_ICUCR17 __reg16(OPSPUT_LCD_BASE + 0x300032) +#define OPSPUT_LCD_ICUCR18 __reg16(OPSPUT_LCD_BASE + 0x300034) +#define OPSPUT_LCD_ICUCR19 __reg16(OPSPUT_LCD_BASE + 0x300036) +#define OPSPUT_LCD_ICUCR21 __reg16(OPSPUT_LCD_BASE + 0x30003a) + +#endif /* _OPSPUT_OPSPUT_LCD_H */ diff --git a/arch/m32r/include/asm/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h new file mode 100644 index 000000000000..3f11ea1aac2d --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_pld.h @@ -0,0 +1,255 @@ +#ifndef _OPSPUT_OPSPUT_PLD_H +#define _OPSPUT_OPSPUT_PLD_H + +/* + * include/asm-m32r/opsput/opsput_pld.h + * + * Definitions for Programable Logic Device(PLD) on OPSPUT board. + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#define PLD_PLAT_BASE 0x1cc00000 + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) +#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#if !defined(CONFIG_PLAT_USRV) +#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CFIREQ (OPSPUT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (OPSPUT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (OPSPUT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (OPSPUT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_INT7 (OPSPUT_PLD_IRQ_BASE + 7) /* reserved */ +#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_MMCCARD (OPSPUT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_INT12 (OPSPUT_PLD_IRQ_BASE + 12) /* reserved */ +#define PLD_IRQ_SC_ERROR (OPSPUT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (OPSPUT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (OPSPUT_PLD_IRQ_BASE + 15) /* SC send */ +#define PLD_IRQ_SIO0_RCV (OPSPUT_PLD_IRQ_BASE + 16) /* SIO receive */ +#define PLD_IRQ_SIO0_SND (OPSPUT_PLD_IRQ_BASE + 17) /* SIO send */ +#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ +#define PLD_IRQ_INT31 (OPSPUT_PLD_IRQ_BASE + 31) /* reserved */ + +#else /* CONFIG_PLAT_USRV */ + +#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CF0 (OPSPUT_PLD_IRQ_BASE + 3) /* CF0# */ +#define PLD_IRQ_CF1 (OPSPUT_PLD_IRQ_BASE + 4) /* CF1# */ +#define PLD_IRQ_CF2 (OPSPUT_PLD_IRQ_BASE + 5) /* CF2# */ +#define PLD_IRQ_CF3 (OPSPUT_PLD_IRQ_BASE + 6) /* CF3# */ +#define PLD_IRQ_CF4 (OPSPUT_PLD_IRQ_BASE + 7) /* CF4# */ +#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_INT11 (OPSPUT_PLD_IRQ_BASE + 11) /* reserved */ +#define PLD_IRQ_UART0 (OPSPUT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ +#define PLD_IRQ_UART1 (OPSPUT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ +#define PLD_IRQ_INT14 (OPSPUT_PLD_IRQ_BASE + 14) /* reserved */ +#define PLD_IRQ_INT15 (OPSPUT_PLD_IRQ_BASE + 15) /* reserved */ +#define PLD_IRQ_SNDINT (OPSPUT_PLD_IRQ_BASE + 16) /* SNDINT# */ +#define PLD_IRQ_INT17 (OPSPUT_PLD_IRQ_BASE + 17) /* reserved */ +#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ + +#endif /* CONFIG_PLAT_USRV */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) +#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) +#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) +#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) +#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) +#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) +#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) +#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CF 0x0001 +#define PLD_CPCR_MMC 0x0002 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _OPSPUT_OPSPUT_PLD.H */ diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h new file mode 100644 index 000000000000..c9333089fe11 --- /dev/null +++ b/arch/m32r/include/asm/page.h @@ -0,0 +1,87 @@ +#ifndef _ASM_M32R_PAGE_H +#define _ASM_M32R_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifndef __ASSEMBLY__ + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte) +#define PTE_MASK PAGE_MASK + +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#endif /* !__ASSEMBLY__ */ + +/* + * This handles the memory map.. We could make this a config + * option, but too many people screw it up, and too few need + * it. + * + * A __PAGE_OFFSET of 0xC0000000 means that the kernel has + * a virtual address space of one gigabyte, which limits the + * amount of physical memory you can use to about 950MB. + * + * If you want more physical memory than this then see the CONFIG_HIGHMEM4G + * and CONFIG_HIGHMEM64G options in the kernel configuration. + */ + +#define __MEMORY_START CONFIG_MEMORY_START +#define __MEMORY_SIZE CONFIG_MEMORY_SIZE + +#ifdef CONFIG_MMU +#define __PAGE_OFFSET (0x80000000) +#else +#define __PAGE_OFFSET (0x00000000) +#endif + +#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET) +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET)) + +#ifndef CONFIG_DISCONTIGMEM +#define PFN_BASE (CONFIG_MEMORY_START >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET PFN_BASE +#define pfn_valid(pfn) (((pfn) - PFN_BASE) < max_mapnr) +#endif /* !CONFIG_DISCONTIGMEM */ + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC ) + +#define devmem_is_allowed(x) 1 + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _ASM_M32R_PAGE_H */ diff --git a/arch/m32r/include/asm/param.h b/arch/m32r/include/asm/param.h new file mode 100644 index 000000000000..94c770196048 --- /dev/null +++ b/arch/m32r/include/asm/param.h @@ -0,0 +1,23 @@ +#ifndef _ASM_M32R_PARAM_H +#define _ASM_M32R_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_M32R_PARAM_H */ + diff --git a/arch/m32r/include/asm/pci.h b/arch/m32r/include/asm/pci.h new file mode 100644 index 000000000000..fe785d167db6 --- /dev/null +++ b/arch/m32r/include/asm/pci.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_PCI_H +#define _ASM_M32R_PCI_H + +#include <asm-generic/pci.h> + +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* _ASM_M32R_PCI_H */ diff --git a/arch/m32r/include/asm/percpu.h b/arch/m32r/include/asm/percpu.h new file mode 100644 index 000000000000..e3169301fe66 --- /dev/null +++ b/arch/m32r/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_M32R_PERCPU__ +#define __ARCH_M32R_PERCPU__ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_M32R_PERCPU__ */ diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h new file mode 100644 index 000000000000..f11a2b909cdb --- /dev/null +++ b/arch/m32r/include/asm/pgalloc.h @@ -0,0 +1,76 @@ +#ifndef _ASM_M32R_PGALLOC_H +#define _ASM_M32R_PGALLOC_H + +#include <linux/mm.h> + +#include <asm/io.h> + +#define pmd_populate_kernel(mm, pmd, pte) \ + set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) + +static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ +static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); + + return pgd; +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long)pgd); +} + +static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); + + return pte; +} + +static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO); + + pgtable_page_ctor(pte); + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + * (In the PAE case we free the pmds as part of the pgd.) + */ + +#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x) do { } while (0) +#define pgd_populate(mm, pmd, pte) BUG() + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_M32R_PGALLOC_H */ diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h new file mode 100644 index 000000000000..bca3475f9595 --- /dev/null +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -0,0 +1,78 @@ +#ifndef _ASM_M32R_PGTABLE_2LEVEL_H +#define _ASM_M32R_PGTABLE_2LEVEL_H +#ifdef __KERNEL__ + +/* + * traditional M32R two-level paging structure: + */ + +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 + +/* + * the M32R is two-level, so we don't really have any + * PMD directory physically. + */ +#define PMD_SHIFT 22 +#define PTRS_PER_PMD 1 + +#define PTRS_PER_PTE 1024 + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } +static inline int pgd_present(pgd_t pgd) { return 1; } +#define pgd_clear(xp) do { } while (0) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesnt get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) +#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval) + +#define pgd_page_vaddr(pgd) \ +((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) >> PAGE_SHIFT) - PFN_BASE)) +#endif /* !CONFIG_DISCONTIGMEM */ + +static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address) +{ + return (pmd_t *) dir; +} + +#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0)) +#define pte_same(a, b) (pte_val(a) == pte_val(b)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_none(x) (!pte_val(x)) +#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7)) +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE }) + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */ diff --git a/arch/m32r/include/asm/pgtable.h b/arch/m32r/include/asm/pgtable.h new file mode 100644 index 000000000000..e6359c566b50 --- /dev/null +++ b/arch/m32r/include/asm/pgtable.h @@ -0,0 +1,363 @@ +#ifndef _ASM_M32R_PGTABLE_H +#define _ASM_M32R_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +#ifdef __KERNEL__ +/* + * The Linux memory management assumes a three-level page table setup. On + * the M32R, we use that, but "fold" the mid level into the top-level page + * table, so that we physically have the same two-level page table as the + * M32R mmu expects. + * + * This file contains the functions and defines necessary to modify and use + * the M32R page table tree. + */ + +/* CAUTION!: If you change macro definitions in this file, you might have to + * change arch/m32r/mmu.S manually. + */ + +#ifndef __ASSEMBLY__ + +#include <linux/threads.h> +#include <linux/bitops.h> +#include <asm/processor.h> +#include <asm/addrspace.h> +#include <asm/page.h> + +struct mm_struct; +struct vm_area_struct; + +extern pgd_t swapper_pg_dir[1024]; +extern void paging_init(void); + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[1024]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +#endif /* !__ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ +#include <asm/pgtable-2level.h> +#endif + +#define pgtable_cache_init() do { } while (0) + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE - 1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifndef __ASSEMBLY__ +/* Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_START KSEG2 +#define VMALLOC_END KSEG3 + +/* + * M32R TLB format + * + * [0] [1:19] [20:23] [24:31] + * +-----------------------+----+-------------+ + * | VPN |0000| ASID | + * +-----------------------+----+-------------+ + * +-+---------------------+----+-+---+-+-+-+-+ + * |0 PPN |0000|N|AC |L|G|V| | + * +-+---------------------+----+-+---+-+-+-+-+ + * RWX + */ + +#define _PAGE_BIT_DIRTY 0 /* software: page changed */ +#define _PAGE_BIT_FILE 0 /* when !present: nonlinear file + mapping */ +#define _PAGE_BIT_PRESENT 1 /* Valid: page is valid */ +#define _PAGE_BIT_GLOBAL 2 /* Global */ +#define _PAGE_BIT_LARGE 3 /* Large */ +#define _PAGE_BIT_EXEC 4 /* Execute */ +#define _PAGE_BIT_WRITE 5 /* Write */ +#define _PAGE_BIT_READ 6 /* Read */ +#define _PAGE_BIT_NONCACHABLE 7 /* Non cachable */ +#define _PAGE_BIT_ACCESSED 8 /* software: page referenced */ +#define _PAGE_BIT_PROTNONE 9 /* software: if not present */ + +#define _PAGE_DIRTY (1UL << _PAGE_BIT_DIRTY) +#define _PAGE_FILE (1UL << _PAGE_BIT_FILE) +#define _PAGE_PRESENT (1UL << _PAGE_BIT_PRESENT) +#define _PAGE_GLOBAL (1UL << _PAGE_BIT_GLOBAL) +#define _PAGE_LARGE (1UL << _PAGE_BIT_LARGE) +#define _PAGE_EXEC (1UL << _PAGE_BIT_EXEC) +#define _PAGE_WRITE (1UL << _PAGE_BIT_WRITE) +#define _PAGE_READ (1UL << _PAGE_BIT_READ) +#define _PAGE_NONCACHABLE (1UL << _PAGE_BIT_NONCACHABLE) +#define _PAGE_ACCESSED (1UL << _PAGE_BIT_ACCESSED) +#define _PAGE_PROTNONE (1UL << _PAGE_BIT_PROTNONE) + +#define _PAGE_TABLE \ + ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ + | _PAGE_DIRTY ) +#define _KERNPG_TABLE \ + ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ + | _PAGE_DIRTY ) +#define _PAGE_CHG_MASK \ + ( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY ) + +#ifdef CONFIG_MMU +#define PAGE_NONE \ + __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED \ + __pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_SHARED_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \ + | _PAGE_ACCESSED) +#define PAGE_COPY \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_COPY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_READONLY \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_READONLY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) + +#define __PAGE_KERNEL \ + ( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \ + | _PAGE_ACCESSED ) +#define __PAGE_KERNEL_RO ( __PAGE_KERNEL & ~_PAGE_WRITE ) +#define __PAGE_KERNEL_NOCACHE ( __PAGE_KERNEL | _PAGE_NONCACHABLE) + +#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL) + +#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) +#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) + +#else +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_SHARED_EXEC __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_COPY_EXEC __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_READONLY_EXEC __pgprot(0) + +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#endif /* CONFIG_MMU */ + + /* xwr */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +/* page table for 0-4MB for everybody */ + +#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE) + +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_dirty(pte_t pte) +{ + return pte_val(pte) & _PAGE_DIRTY; +} + +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & _PAGE_ACCESSED; +} + +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & _PAGE_WRITE; +} + +/* + * The following only works if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) +{ + return pte_val(pte) & _PAGE_FILE; +} + +static inline int pte_special(pte_t pte) +{ + return 0; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_WRITE; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= _PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= _PAGE_WRITE; + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return pte; +} + +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); +} + +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + clear_bit(_PAGE_BIT_WRITE, ptep); +} + +/* + * Macro and implementation to make a page protection as uncachable. + */ +static inline pgprot_t pgprot_noncached(pgprot_t _prot) +{ + unsigned long prot = pgprot_val(_prot); + + prot |= _PAGE_NONCACHABLE; + return __pgprot(prot); +} + +#define pgprot_writecombine(prot) pgprot_noncached(prot) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), pgprot) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \ + | pgprot_val(newprot))); + + return pte; +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) +{ + pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK); +} + +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE)) +#endif /* !CONFIG_DISCONTIGMEM */ + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) \ + (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) + +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +#define pmd_index(address) \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) + +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 10) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#endif /* !__ASSEMBLY__ */ + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#include <asm-generic/pgtable.h> + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_PGTABLE_H */ diff --git a/arch/m32r/include/asm/poll.h b/arch/m32r/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/m32r/include/asm/poll.h @@ -0,0 +1 @@ +#include <asm-generic/poll.h> diff --git a/arch/m32r/include/asm/posix_types.h b/arch/m32r/include/asm/posix_types.h new file mode 100644 index 000000000000..b309c5858637 --- /dev/null +++ b/arch/m32r/include/asm/posix_types.h @@ -0,0 +1,118 @@ +#ifndef _ASM_M32R_POSIX_TYPES_H +#define _ASM_M32R_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_M32R_POSIX_TYPES_H */ diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h new file mode 100644 index 000000000000..1a997fc148a2 --- /dev/null +++ b/arch/m32r/include/asm/processor.h @@ -0,0 +1,147 @@ +#ifndef _ASM_M32R_PROCESSOR_H +#define _ASM_M32R_PROCESSOR_H + +/* + * include/asm-m32r/processor.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Linus Torvalds + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/kernel.h> +#include <asm/cache.h> +#include <asm/ptrace.h> /* pt_regs */ + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l; }) + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +struct cpuinfo_m32r { + unsigned long pgtable_cache_sz; + unsigned long cpu_clock; + unsigned long bus_clock; + unsigned long timer_divide; + unsigned long loops_per_jiffy; +}; + +/* + * capabilities of CPUs + */ + +extern struct cpuinfo_m32r boot_cpu_data; + +#ifdef CONFIG_SMP +extern struct cpuinfo_m32r cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data +#endif + +/* + * User space process size: 2GB (default). + */ +#ifdef CONFIG_MMU +#define TASK_SIZE (0x80000000UL) +#else +#define TASK_SIZE (0x00400000UL) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAX_TRAPS 10 + +struct debug_trap { + int nr_trap; + unsigned long addr[MAX_TRAPS]; + unsigned long insn[MAX_TRAPS]; +}; + +struct thread_struct { + unsigned long address; + unsigned long trap_no; /* Trap number */ + unsigned long error_code; /* Error code of trap */ + unsigned long lr; /* saved pc */ + unsigned long sp; /* user stack pointer */ + struct debug_trap debug_trap; +}; + +#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) + +#define INIT_THREAD { \ + .sp = INIT_SP, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ + +/* User process Backup PSW */ +#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM) + +#define start_thread(regs, new_pc, new_spu) \ + do { \ + set_fs(USER_DS); \ + regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL; \ + regs->bpc = new_pc; \ + regs->spu = new_spu; \ + } while (0) + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +extern void copy_segments(struct task_struct *p, struct mm_struct * mm); +extern void release_segments(struct mm_struct * mm); + +extern unsigned long thread_saved_pc(struct task_struct *); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) + +unsigned long get_wchan(struct task_struct *p); +#define KSTK_EIP(tsk) ((tsk)->thread.lr) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define THREAD_SIZE (2*PAGE_SIZE) + +#define cpu_relax() barrier() + +#endif /* _ASM_M32R_PROCESSOR_H */ diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h new file mode 100644 index 000000000000..a0755b982028 --- /dev/null +++ b/arch/m32r/include/asm/ptrace.h @@ -0,0 +1,148 @@ +#ifndef _ASM_M32R_PTRACE_H +#define _ASM_M32R_PTRACE_H + +/* + * linux/include/asm-m32r/ptrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * M32R version: + * Copyright (C) 2001-2002, 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +/* 0 - 13 are integer registers (general purpose registers). */ +#define PT_R4 0 +#define PT_R5 1 +#define PT_R6 2 +#define PT_REGS 3 +#define PT_R0 4 +#define PT_R1 5 +#define PT_R2 6 +#define PT_R3 7 +#define PT_R7 8 +#define PT_R8 9 +#define PT_R9 10 +#define PT_R10 11 +#define PT_R11 12 +#define PT_R12 13 +#define PT_SYSCNR 14 +#define PT_R13 PT_FP +#define PT_R14 PT_LR +#define PT_R15 PT_SP + +/* processor status and miscellaneous context registers. */ +#define PT_ACC0H 15 +#define PT_ACC0L 16 +#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */ +#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */ +#define PT_PSW 19 +#define PT_BPC 20 +#define PT_BBPSW 21 +#define PT_BBPC 22 +#define PT_SPU 23 +#define PT_FP 24 +#define PT_LR 25 +#define PT_SPI 26 +#define PT_ORIGR0 27 + +/* virtual pt_reg entry for gdb */ +#define PT_PC 30 +#define PT_CBR 31 +#define PT_EVB 32 + + +/* Control registers. */ +#define SPR_CR0 PT_PSW +#define SPR_CR1 PT_CBR /* read only */ +#define SPR_CR2 PT_SPI +#define SPR_CR3 PT_SPU +#define SPR_CR4 +#define SPR_CR5 PT_EVB /* part of M32R/E, M32R/I core only */ +#define SPR_CR6 PT_BPC +#define SPR_CR7 +#define SPR_CR8 PT_BBPSW +#define SPR_CR9 +#define SPR_CR10 +#define SPR_CR11 +#define SPR_CR12 +#define SPR_CR13 PT_WR +#define SPR_CR14 PT_BBPC +#define SPR_CR15 + +/* this struct defines the way the registers are stored on the + stack during a system call. */ +struct pt_regs { + /* Saved main processor registers. */ + unsigned long r4; + unsigned long r5; + unsigned long r6; + struct pt_regs *pt_regs; + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + long syscall_nr; + + /* Saved main processor status and miscellaneous context registers. */ + unsigned long acc0h; + unsigned long acc0l; + unsigned long acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long acc1l; /* ISA_DSP_LEVEL2 only */ + unsigned long psw; + unsigned long bpc; /* saved PC for TRAP syscalls */ + unsigned long bbpsw; + unsigned long bbpc; + unsigned long spu; /* saved user stack */ + unsigned long fp; + unsigned long lr; /* saved PC for JL syscalls */ + unsigned long spi; /* saved kernel stack */ + unsigned long orig_r0; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +#define PTRACE_OLDSETOPTIONS 21 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#ifdef __KERNEL__ + +#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */ + +struct task_struct; +extern void init_debug_traps(struct task_struct *); +#define arch_ptrace_attach(child) \ + init_debug_traps(child) + +#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2) +#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0) +#elif defined(CONFIG_ISA_M32R) +#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0) +#else +#error unknown isa configuration +#endif + +#define instruction_pointer(regs) ((regs)->bpc) +#define profile_pc(regs) instruction_pointer(regs) + +extern void show_regs(struct pt_regs *); + +extern void withdraw_debug_trap(struct pt_regs *regs); + +#define task_pt_regs(task) \ + ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1) + +#endif /* __KERNEL */ + +#endif /* _ASM_M32R_PTRACE_H */ diff --git a/arch/m32r/include/asm/resource.h b/arch/m32r/include/asm/resource.h new file mode 100644 index 000000000000..b1ce766e37a0 --- /dev/null +++ b/arch/m32r/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_RESOURCE_H +#define _ASM_M32R_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* _ASM_M32R_RESOURCE_H */ diff --git a/arch/m32r/include/asm/rtc.h b/arch/m32r/include/asm/rtc.h new file mode 100644 index 000000000000..0340633f3f4d --- /dev/null +++ b/arch/m32r/include/asm/rtc.h @@ -0,0 +1,65 @@ +#ifndef __RTC_H__ +#define __RTC_H__ + + /* Dallas DS1302 clock/calendar register numbers. */ +# define RTC_SECONDS 0 +# define RTC_MINUTES 1 +# define RTC_HOURS 2 +# define RTC_DAY_OF_MONTH 3 +# define RTC_MONTH 4 +# define RTC_WEEKDAY 5 +# define RTC_YEAR 6 +# define RTC_CONTROL 7 + + /* Bits in CONTROL register. */ +# define RTC_CONTROL_WRITEPROTECT 0x80 +# define RTC_TRICKLECHARGER 8 + + /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ +# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ +# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ +# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ +# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ +# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ +# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ +# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ + +#ifdef CONFIG_DS1302 +extern unsigned char ds1302_readreg(int reg); +extern void ds1302_writereg(int reg, unsigned char val); +extern int ds1302_init(void); +# define CMOS_READ(x) ds1302_readreg(x) +# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) +# define RTC_INIT() ds1302_init() +#else + /* No RTC configured so we shouldn't try to access any. */ +# define CMOS_READ(x) 42 +# define CMOS_WRITE(x,y) +# define RTC_INIT() (-1) +#endif + +/* + * The struct used to pass data via the following ioctl. Similar to the + * struct tm in <time.h>, but it needs to be here so that the kernel + * source is self contained, allowing cross-compiles, etc. etc. + */ +struct rtc_time { + int tm_sec; + int tm_min; + int tm_hour; + int tm_mday; + int tm_mon; + int tm_year; + int tm_wday; + int tm_yday; + int tm_isdst; +}; + +/* ioctl() calls that are permitted to the /dev/rtc interface. */ +#define RTC_MAGIC 'p' +#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */ +#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */ +#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) +#define RTC_MAX_IOCTL 0x0b + +#endif /* __RTC_H__ */ diff --git a/arch/m32r/include/asm/s1d13806.h b/arch/m32r/include/asm/s1d13806.h new file mode 100644 index 000000000000..248d36a82d79 --- /dev/null +++ b/arch/m32r/include/asm/s1d13806.h @@ -0,0 +1,199 @@ +//---------------------------------------------------------------------------- +// +// File generated by S1D13806CFG.EXE +// +// Copyright (c) 2000,2001 Epson Research and Development, Inc. +// All rights reserved. +// +//---------------------------------------------------------------------------- + +// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz) +// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz) + +#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */ + +static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { + + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register +#if defined(CONFIG_PLAT_MAPPI) + {0x0004,0x00}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0x00}, // General IO Pins Control Register 0 + {0x0009,0x00}, // General IO Pins Control Register 1 + {0x0010,0x00}, // Memory Clock Configuration Register + {0x0014,0x00}, // LCD Pixel Clock Configuration Register + {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x00}, // MediaPlug Clock Configuration Register +/* + * .. 10MHz: 0x00 + * .. 30MHz: 0x01 + * 30MHz ..: 0x02 + */ + {0x001E,0x02}, // CPU To Memory Wait State Select Register + {0x0021,0x02}, // DRAM Refresh Rate Register + {0x002A,0x11}, // DRAM Timings Control Register 0 + {0x002B,0x13}, // DRAM Timings Control Register 1 + {0x0020,0x80}, // Memory Configuration Register + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x12}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xDF}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x2C}, // LCD Vertical Non-Display Period Register + {0x003B,0x0A}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + + {0x0041,0x00}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + +#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0004,0x07}, // GPIO[0:7] direction + {0x0005,0x00}, // GPIO[8:12] direction + {0x0008,0x00}, // GPIO[0:7] data + {0x0009,0x00}, // GPIO[8:12] data + {0x0008,0x04}, // LCD panel Vcc on + {0x0008,0x05}, // LCD panel reset + {0x0010,0x01}, // Memory Clock Configuration Register + {0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4) + {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz) + {0x001E,0x00}, // CPU To Memory Wait State Select Register + {0x0020,0x80}, // Memory Configuration Register + {0x0021,0x03}, // DRAM Refresh Rate Register + {0x002A,0x00}, // DRAM Timings Control Register 0 + {0x002B,0x01}, // DRAM Timings Control Register 1 + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x1d}, // LCD Horizontal Display Width Register + {0x0034,0x05}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x01}, // TFT FPLINE Pulse Width Register + {0x0038,0x3F}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x0b}, // LCD Vertical Non-Display Period Register + {0x003B,0x07}, // TFT FPFRAME Start Position Register + {0x003C,0x02}, // TFT FPFRAME Pulse Width Register + + {0x0041,0x00}, // LCD Miscellaneous Register +#if (SWIVEL_VIEW == 0) + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + +#elif (SWIVEL_VIEW == 1) + // 1024 - W(320) = 0x2C0 + {0x0042,0xC0}, // LCD Display Start Address Register 0 + {0x0043,0x02}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + // 1024 + {0x0046,0x00}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 +#else +#error unsupported SWIVEL_VIEW mode +#endif +#else +#error no platform configuration +#endif /* CONFIG_PLAT_XXX */ + + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x10}, // TV Output Control Register + + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x01}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x00}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register +#if (SWIVEL_VIEW == 0) + {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +#elif (SWIVEL_VIEW == 1) + {0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +#else +#error unsupported SWIVEL_VIEW mode +#endif /* SWIVEL_VIEW */ + +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0008,0x07}, // LCD panel Vdd & Vg on +#endif + + {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) +#if defined(CONFIG_PLAT_MAPPI) + {0x0046,0x80}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 +#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0046,0xf0}, // LCD Memory Address Offset Register 0 + {0x0047,0x00}, // LCD Memory Address Offset Register 1 +#endif + {0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo + {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1 +}; diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h new file mode 100644 index 000000000000..1ed372c73d0b --- /dev/null +++ b/arch/m32r/include/asm/scatterlist.h @@ -0,0 +1,21 @@ +#ifndef _ASM_M32R_SCATTERLIST_H +#define _ASM_M32R_SCATTERLIST_H + +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + char * address; /* Location data is to be transferred to, NULL for + * highmem page */ + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD (0x1fffffff) + +#endif /* _ASM_M32R_SCATTERLIST_H */ diff --git a/arch/m32r/include/asm/sections.h b/arch/m32r/include/asm/sections.h new file mode 100644 index 000000000000..5e5d21c4908a --- /dev/null +++ b/arch/m32r/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _M32R_SECTIONS_H +#define _M32R_SECTIONS_H + +/* nothing to see, move along */ +#include <asm-generic/sections.h> + +#endif /* _M32R_SECTIONS_H */ diff --git a/arch/m32r/include/asm/segment.h b/arch/m32r/include/asm/segment.h new file mode 100644 index 000000000000..42b11aeb3249 --- /dev/null +++ b/arch/m32r/include/asm/segment.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_SEGMENT_H +#define _ASM_M32R_SEGMENT_H + +#define __KERNEL_CS 0x10 +#define __KERNEL_DS 0x18 + +#define __USER_CS 0x23 +#define __USER_DS 0x2B + +#endif /* _ASM_M32R_SEGMENT_H */ diff --git a/arch/m32r/include/asm/sembuf.h b/arch/m32r/include/asm/sembuf.h new file mode 100644 index 000000000000..c9873d6890e2 --- /dev/null +++ b/arch/m32r/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASM_M32R_SEMBUF_H +#define _ASM_M32R_SEMBUF_H + +/* + * The semid64_ds structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_M32R_SEMBUF_H */ diff --git a/arch/m32r/include/asm/serial.h b/arch/m32r/include/asm/serial.h new file mode 100644 index 000000000000..5ac244c72f15 --- /dev/null +++ b/arch/m32r/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_M32R_SERIAL_H +#define _ASM_M32R_SERIAL_H + +/* include/asm-m32r/serial.h */ + + +#define BASE_BAUD 115200 + +#endif /* _ASM_M32R_SERIAL_H */ diff --git a/arch/m32r/include/asm/setup.h b/arch/m32r/include/asm/setup.h new file mode 100644 index 000000000000..c637ab992394 --- /dev/null +++ b/arch/m32r/include/asm/setup.h @@ -0,0 +1,38 @@ +#ifndef _ASM_M32R_SETUP_H +#define _ASM_M32R_SETUP_H + +/* + * This is set up by the setup-routine at boot-time + */ + +#define COMMAND_LINE_SIZE 512 + +#ifdef __KERNEL__ + +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) + +#define M32R_CPUCLK (*(unsigned long *) (PARAM+0x018)) +#define M32R_BUSCLK (*(unsigned long *) (PARAM+0x01c)) +#define M32R_TIMER_DIVIDE (*(unsigned long *) (PARAM+0x020)) + +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200)) + +#define RAMDISK_IMAGE_START_MASK (0x07FF) +#define RAMDISK_PROMPT_FLAG (0x8000) +#define RAMDISK_LOAD_FLAG (0x4000) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_SETUP_H */ diff --git a/arch/m32r/include/asm/shmbuf.h b/arch/m32r/include/asm/shmbuf.h new file mode 100644 index 000000000000..b0cdf0aa7d65 --- /dev/null +++ b/arch/m32r/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASM_M32R_SHMBUF_H +#define _ASM_M32R_SHMBUF_H + +/* + * The shmid64_ds structure for M32R architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_M32R_SHMBUF_H */ diff --git a/arch/m32r/include/asm/shmparam.h b/arch/m32r/include/asm/shmparam.h new file mode 100644 index 000000000000..35986d81a528 --- /dev/null +++ b/arch/m32r/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_SHMPARAM_H +#define _ASM_M32R_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_M32R_SHMPARAM_H */ diff --git a/arch/m32r/include/asm/sigcontext.h b/arch/m32r/include/asm/sigcontext.h new file mode 100644 index 000000000000..da4a9c36d09b --- /dev/null +++ b/arch/m32r/include/asm/sigcontext.h @@ -0,0 +1,39 @@ +#ifndef _ASM_M32R_SIGCONTEXT_H +#define _ASM_M32R_SIGCONTEXT_H + +struct sigcontext { + /* CPU registers */ + /* Saved main processor registers. */ + unsigned long sc_r4; + unsigned long sc_r5; + unsigned long sc_r6; + struct pt_regs *sc_pt_regs; + unsigned long sc_r0; + unsigned long sc_r1; + unsigned long sc_r2; + unsigned long sc_r3; + unsigned long sc_r7; + unsigned long sc_r8; + unsigned long sc_r9; + unsigned long sc_r10; + unsigned long sc_r11; + unsigned long sc_r12; + + /* Saved main processor status and miscellaneous context registers. */ + unsigned long sc_acc0h; + unsigned long sc_acc0l; + unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */ + unsigned long sc_psw; + unsigned long sc_bpc; /* saved PC for TRAP syscalls */ + unsigned long sc_bbpsw; + unsigned long sc_bbpc; + unsigned long sc_spu; /* saved user stack */ + unsigned long sc_fp; + unsigned long sc_lr; /* saved PC for JL syscalls */ + unsigned long sc_spi; /* saved kernel stack */ + + unsigned long oldmask; +}; + +#endif /* _ASM_M32R_SIGCONTEXT_H */ diff --git a/arch/m32r/include/asm/siginfo.h b/arch/m32r/include/asm/siginfo.h new file mode 100644 index 000000000000..7d9cd9ebfd0e --- /dev/null +++ b/arch/m32r/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _M32R_SIGINFO_H +#define _M32R_SIGINFO_H + +#include <asm-generic/siginfo.h> + +#endif /* _M32R_SIGINFO_H */ diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h new file mode 100644 index 000000000000..1a607066bc64 --- /dev/null +++ b/arch/m32r/include/asm/signal.h @@ -0,0 +1,166 @@ +#ifndef _ASM_M32R_SIGNAL_H +#define _ASM_M32R_SIGNAL_H + +#include <linux/types.h> +#include <linux/time.h> +#include <linux/compiler.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001u +#define SA_NOCLDWAIT 0x00000002u +#define SA_SIGINFO 0x00000004u +#define SA_ONSTACK 0x08000000u +#define SA_RESTART 0x10000000u +#define SA_NODEFER 0x40000000u +#define SA_RESETHAND 0x80000000u + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include <asm/sigcontext.h> + +#undef __HAVE_ARCH_SIG_BITOPS + +struct pt_regs; +extern int do_signal(struct pt_regs *regs, sigset_t *oldset); + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_SIGNAL_H */ diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h new file mode 100644 index 000000000000..b96a6d2ffbc3 --- /dev/null +++ b/arch/m32r/include/asm/smp.h @@ -0,0 +1,119 @@ +#ifndef _ASM_M32R_SMP_H +#define _ASM_M32R_SMP_H + +#ifdef CONFIG_SMP +#ifndef __ASSEMBLY__ + +#include <linux/cpumask.h> +#include <linux/spinlock.h> +#include <linux/threads.h> +#include <asm/m32r.h> + +#define PHYSID_ARRAY_SIZE 1 + +struct physid_mask +{ + unsigned long mask[PHYSID_ARRAY_SIZE]; +}; + +typedef struct physid_mask physid_mask_t; + +#define physid_set(physid, map) set_bit(physid, (map).mask) +#define physid_clear(physid, map) clear_bit(physid, (map).mask) +#define physid_isset(physid, map) test_bit(physid, (map).mask) +#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask) + +#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS) +#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS) +#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS) +#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS) +#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS) +#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS) +#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS) +#define physids_coerce(map) ((map).mask[0]) + +#define physids_promote(physids) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + __physid_mask.mask[0] = physids; \ + __physid_mask; \ + }) + +#define physid_mask_of_physid(physid) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + physid_set(physid, __physid_mask); \ + __physid_mask; \ + }) + +#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} } +#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} } + +extern physid_mask_t phys_cpu_present_map; + +/* + * Some lowlevel functions might want to know about + * the real CPU ID <-> CPU # mapping. + */ +extern volatile int cpu_2_physid[NR_CPUS]; +#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id] + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +extern cpumask_t cpu_callout_map; + +static __inline__ int hard_smp_processor_id(void) +{ + return (int)*(volatile long *)M32R_CPUID_PORTL; +} + +static __inline__ int cpu_logical_map(int cpu) +{ + return cpu; +} + +static __inline__ int cpu_number_map(int cpu) +{ + return cpu; +} + +static __inline__ unsigned int num_booting_cpus(void) +{ + return cpus_weight(cpu_callout_map); +} + +extern void smp_send_timer(void); +extern unsigned long send_IPI_mask_phys(cpumask_t, int, int); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* not __ASSEMBLY__ */ + +#define NO_PROC_ID (0xff) /* No processor magic marker */ + +#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */ + +/* + * M32R-mp IPI + */ +#define RESCHEDULE_IPI (M32R_IRQ_IPI0-M32R_IRQ_IPI0) +#define INVALIDATE_TLB_IPI (M32R_IRQ_IPI1-M32R_IRQ_IPI0) +#define CALL_FUNCTION_IPI (M32R_IRQ_IPI2-M32R_IRQ_IPI0) +#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0) +#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0) +#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0) +#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0) + +#define IPI_SHIFT (0) +#define NR_IPIS (8) + +#else /* CONFIG_SMP */ + +#define hard_smp_processor_id() 0 + +#endif /* CONFIG_SMP */ + +#endif /* _ASM_M32R_SMP_H */ diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h new file mode 100644 index 000000000000..be7ed589af5c --- /dev/null +++ b/arch/m32r/include/asm/socket.h @@ -0,0 +1,60 @@ +#ifndef _ASM_M32R_SOCKET_H +#define _ASM_M32R_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_M32R_SOCKET_H */ diff --git a/arch/m32r/include/asm/sockios.h b/arch/m32r/include/asm/sockios.h new file mode 100644 index 000000000000..6c1fb9b43bdb --- /dev/null +++ b/arch/m32r/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef _ASM_M32R_SOCKIOS_H +#define _ASM_M32R_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_M32R_SOCKIOS_H */ diff --git a/arch/m32r/include/asm/spinlock.h b/arch/m32r/include/asm/spinlock.h new file mode 100644 index 000000000000..dded923883b2 --- /dev/null +++ b/arch/m32r/include/asm/spinlock.h @@ -0,0 +1,326 @@ +#ifndef _ASM_M32R_SPINLOCK_H +#define _ASM_M32R_SPINLOCK_H + +/* + * linux/include/asm-m32r/spinlock.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/compiler.h> +#include <asm/atomic.h> +#include <asm/page.h> + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + * + * (the type definitions are in asm/spinlock_types.h) + * + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define __raw_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while (__raw_spin_is_locked(x)) + +/** + * __raw_spin_trylock - Try spin lock and return a result + * @lock: Pointer to the lock variable + * + * __raw_spin_trylock() tries to get the lock and returns a result. + * On the m32r, the result value is 1 (= Success) or 0 (= Failure). + */ +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + int oldval; + unsigned long tmp1, tmp2; + + /* + * lock->slock : =1 : unlock + * : <=0 : lock + * { + * oldval = lock->slock; <--+ need atomic operation + * lock->slock = 0; <--+ + * } + */ + __asm__ __volatile__ ( + "# __raw_spin_trylock \n\t" + "ldi %1, #0; \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%3") + "lock %0, @%3; \n\t" + "unlock %1, @%3; \n\t" + "mvtc %2, psw; \n\t" + : "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&lock->slock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + + return (oldval > 0); +} + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp0, tmp1; + + /* + * lock->slock : =1 : unlock + * : <=0 : lock + * + * for ( ; ; ) { + * lock->slock -= 1; <-- need atomic operation + * if (lock->slock == 0) break; + * for ( ; lock->slock <= 0 ; ); + * } + */ + __asm__ __volatile__ ( + "# __raw_spin_lock \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #-1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + "bltz %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "ld %0, @%2; \n\t" + "bgtz %0, 1b; \n\t" + "bra 2b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&lock->slock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + mb(); + lock->slock = 1; +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + * + * On x86, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + * + * The inline assembly is non-obvious. Think about it. + * + * Changed to use the same technique as rw semaphores. See + * semaphore.h for details. -ben + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1; + + /* + * rw->lock : >0 : unlock + * : <=0 : lock + * + * for ( ; ; ) { + * rw->lock -= 1; <-- need atomic operation + * if (rw->lock >= 0) break; + * rw->lock += 1; <-- need atomic operation + * for ( ; rw->lock <= 0 ; ); + * } + */ + __asm__ __volatile__ ( + "# read_lock \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #-1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + "bltz %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + ".fillinsn \n" + "3: \n\t" + "ld %0, @%2; \n\t" + "bgtz %0, 1b; \n\t" + "bra 3b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1, tmp2; + + /* + * rw->lock : =RW_LOCK_BIAS_STR : unlock + * : !=RW_LOCK_BIAS_STR : lock + * + * for ( ; ; ) { + * rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation + * if (rw->lock == 0) break; + * rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation + * for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ; + * } + */ + __asm__ __volatile__ ( + "# write_lock \n\t" + "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" + "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "sub %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + "bnez %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "add %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + ".fillinsn \n" + "3: \n\t" + "ld %0, @%3; \n\t" + "beq %0, %1, 1b; \n\t" + "bra 3b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r7" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1; + + __asm__ __volatile__ ( + "# read_unlock \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1, tmp2; + + __asm__ __volatile__ ( + "# write_unlock \n\t" + "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" + "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "add %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r7" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline int __raw_read_trylock(raw_rwlock_t *lock) +{ + atomic_t *count = (atomic_t*)lock; + if (atomic_dec_return(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int __raw_write_trylock(raw_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock) +#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_M32R_SPINLOCK_H */ diff --git a/arch/m32r/include/asm/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h new file mode 100644 index 000000000000..83f52105c0e4 --- /dev/null +++ b/arch/m32r/include/asm/spinlock_types.h @@ -0,0 +1,23 @@ +#ifndef _ASM_M32R_SPINLOCK_TYPES_H +#define _ASM_M32R_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile int slock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } + +typedef struct { + volatile int lock; +} raw_rwlock_t; + +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_M32R_SPINLOCK_TYPES_H */ diff --git a/arch/m32r/include/asm/stat.h b/arch/m32r/include/asm/stat.h new file mode 100644 index 000000000000..da4518f82d6d --- /dev/null +++ b/arch/m32r/include/asm/stat.h @@ -0,0 +1,87 @@ +#ifndef _ASM_M32R_STAT_H +#define _ASM_M32R_STAT_H + +#include <asm/byteorder.h> + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; +#define STAT64_HAS_BROKEN_ST_INO + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + +#if defined(__BIG_ENDIAN) + unsigned long __pad4; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ +#elif defined(__LITTLE_ENDIAN) + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ +#else +#error no endian defined +#endif + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _ASM_M32R_STAT_H */ diff --git a/arch/m32r/include/asm/statfs.h b/arch/m32r/include/asm/statfs.h new file mode 100644 index 000000000000..6eb4c6007e6b --- /dev/null +++ b/arch/m32r/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_STATFS_H +#define _ASM_M32R_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* _ASM_M32R_STATFS_H */ diff --git a/arch/m32r/include/asm/string.h b/arch/m32r/include/asm/string.h new file mode 100644 index 000000000000..e61e2b0bfc1f --- /dev/null +++ b/arch/m32r/include/asm/string.h @@ -0,0 +1,13 @@ +#ifndef _ASM_M32R_STRING_H +#define _ASM_M32R_STRING_H + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char * s); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#endif /* _ASM_M32R_STRING_H */ diff --git a/arch/m32r/include/asm/swab.h b/arch/m32r/include/asm/swab.h new file mode 100644 index 000000000000..54dab001d6d1 --- /dev/null +++ b/arch/m32r/include/asm/swab.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_SWAB_H +#define _ASM_M32R_SWAB_H + +#include <linux/types.h> + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* _ASM_M32R_SWAB_H */ diff --git a/arch/m32r/include/asm/syscall.h b/arch/m32r/include/asm/syscall.h new file mode 100644 index 000000000000..25f316f2b78d --- /dev/null +++ b/arch/m32r/include/asm/syscall.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_SYSCALL_H +#define _ASM_M32R_SYSCALL_H + +/* Definitions for the system call vector. */ +#define SYSCALL_VECTOR "2" +#define SYSCALL_VECTOR_ADDRESS "0xa0" + +#endif /* _ASM_M32R_SYSCALL_H */ diff --git a/arch/m32r/include/asm/system.h b/arch/m32r/include/asm/system.h new file mode 100644 index 000000000000..c980f5ba8de7 --- /dev/null +++ b/arch/m32r/include/asm/system.h @@ -0,0 +1,431 @@ +#ifndef _ASM_M32R_SYSTEM_H +#define _ASM_M32R_SYSTEM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/compiler.h> +#include <asm/assembler.h> + +#ifdef __KERNEL__ + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. + * + * `next' and `prev' should be struct task_struct, but it isn't always defined + */ + +#if defined(CONFIG_FRAME_POINTER) || \ + !defined(CONFIG_SCHED_OMIT_FRAME_POINTER) +#define M32R_PUSH_FP " push fp\n" +#define M32R_POP_FP " pop fp\n" +#else +#define M32R_PUSH_FP "" +#define M32R_POP_FP "" +#endif + +#define switch_to(prev, next, last) do { \ + __asm__ __volatile__ ( \ + " seth lr, #high(1f) \n" \ + " or3 lr, lr, #low(1f) \n" \ + " st lr, @%4 ; store old LR \n" \ + " ld lr, @%5 ; load new LR \n" \ + M32R_PUSH_FP \ + " st sp, @%2 ; store old SP \n" \ + " ld sp, @%3 ; load new SP \n" \ + " push %1 ; store `prev' on new stack \n" \ + " jmp lr \n" \ + " .fillinsn \n" \ + "1: \n" \ + " pop %0 ; restore `__last' from new stack \n" \ + M32R_POP_FP \ + : "=r" (last) \ + : "0" (prev), \ + "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \ + "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \ + : "memory", "lr" \ + ); \ +} while(0) + +/* Interrupt Control */ +#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) +#define local_irq_enable() \ + __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory") +#define local_irq_disable() \ + __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +static inline void local_irq_enable(void) +{ + unsigned long tmpreg; + __asm__ __volatile__( + "mvfc %0, psw; \n\t" + "or3 %0, %0, #0x0040; \n\t" + "mvtc %0, psw; \n\t" + : "=&r" (tmpreg) : : "cbit", "memory"); +} + +static inline void local_irq_disable(void) +{ + unsigned long tmpreg0, tmpreg1; + __asm__ __volatile__( + "ld24 %0, #0 ; Use 32-bit insn. \n\t" + "mvfc %1, psw ; No interrupt can be accepted here. \n\t" + "mvtc %0, psw \n\t" + "and3 %0, %1, #0xffbf \n\t" + "mvtc %0, psw \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory"); +} +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define local_save_flags(x) \ + __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */) + +#define local_irq_restore(x) \ + __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \ + : "r" (x) : "cbit", "memory") + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) +#define local_irq_save(x) \ + __asm__ __volatile__( \ + "mvfc %0, psw; \n\t" \ + "clrpsw #0x40 -> nop; \n\t" \ + : "=r" (x) : /* no input */ : "memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +#define local_irq_save(x) \ + ({ \ + unsigned long tmpreg; \ + __asm__ __volatile__( \ + "ld24 %1, #0 \n\t" \ + "mvfc %0, psw \n\t" \ + "mvtc %1, psw \n\t" \ + "and3 %1, %0, #0xffbf \n\t" \ + "mvtc %1, psw \n\t" \ + : "=r" (x), "=&r" (tmpreg) \ + : : "cbit", "memory"); \ + }) +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define irqs_disabled() \ + ({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & 0x40); \ + }) + +#define nop() __asm__ __volatile__ ("nop" : : ) + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define xchg_local(ptr, x) \ + ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \ + sizeof(*(ptr)))) + +extern void __xchg_called_with_bad_pointer(void); + +#ifdef CONFIG_CHIP_M32700_TS1 +#define DCACHE_CLEAR(reg0, reg1, addr) \ + "seth "reg1", #high(dcache_dummy); \n\t" \ + "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \ + "lock "reg0", @"reg1"; \n\t" \ + "add3 "reg0", "addr", #0x1000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "add3 "reg0", "addr", #0x2000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "unlock "reg0", @"reg1"; \n\t" + /* FIXME: This workaround code cannot handle kernel modules + * correctly under SMP environment. + */ +#else /* CONFIG_CHIP_M32700_TS1 */ +#define DCACHE_CLEAR(reg0, reg1, addr) +#endif /* CONFIG_CHIP_M32700_TS1 */ + +static __always_inline unsigned long +__xchg(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { +#ifndef CONFIG_SMP + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; +#else /* CONFIG_SMP */ + case 4: + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%2") + "lock %0, @%2; \n\t" + "unlock %1, @%2; \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + break; +#endif /* CONFIG_SMP */ + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +static __always_inline unsigned long +__xchg_local(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n" + " bne %0, %2, 1f; \n" + M32R_UNLOCK" %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + M32R_UNLOCK" %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +static inline unsigned long +__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old, + unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n" + " bne %0, %2, 1f; \n" + "st %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + "st %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); +#if 0 /* we don't have __cmpxchg_u64 */ + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif /* 0 */ + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) + +#include <asm-generic/cmpxchg-local.h> + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_local_u32(ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* __KERNEL__ */ + +/* + * Memory barrier. + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + */ +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * <programlisting> + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * </programlisting> + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * <programlisting> + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * </programlisting> + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +#define arch_align_stack(x) (x) + +#endif /* _ASM_M32R_SYSTEM_H */ diff --git a/arch/m32r/include/asm/termbits.h b/arch/m32r/include/asm/termbits.h new file mode 100644 index 000000000000..bc104008b55b --- /dev/null +++ b/arch/m32r/include/asm/termbits.h @@ -0,0 +1,199 @@ +#ifndef _ASM_M32R_TERMBITS_H +#define _ASM_M32R_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /** input baud rate */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_M32R_TERMBITS_H */ diff --git a/arch/m32r/include/asm/termios.h b/arch/m32r/include/asm/termios.h new file mode 100644 index 000000000000..93ce79fd342a --- /dev/null +++ b/arch/m32r/include/asm/termios.h @@ -0,0 +1,91 @@ +#ifndef _M32R_TERMIOS_H +#define _M32R_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ +#include <linux/module.h> + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _M32R_TERMIOS_H */ diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h new file mode 100644 index 000000000000..8589d462df27 --- /dev/null +++ b/arch/m32r/include/asm/thread_info.h @@ -0,0 +1,184 @@ +#ifndef _ASM_M32R_THREAD_INFO_H +#define _ASM_M32R_THREAD_INFO_H + +/* thread_info.h: m32r low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> + */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> +#endif + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thread + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +/* offsets into the thread_info struct for assembly code access */ +#define TI_TASK 0x00000000 +#define TI_EXEC_DOMAIN 0x00000004 +#define TI_FLAGS 0x00000008 +#define TI_STATUS 0x0000000C +#define TI_CPU 0x00000010 +#define TI_PRE_COUNT 0x00000014 +#define TI_ADDR_LIMIT 0x00000018 +#define TI_RESTART_BLOCK 0x000001C + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +#define THREAD_SIZE (2*PAGE_SIZE) + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + + __asm__ __volatile__ ( + "ldi %0, #%1 \n\t" + "and %0, sp \n\t" + : "=r" (ti) : "i" (~(THREAD_SIZE - 1)) + ); + + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ + }) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#define TI_FLAG_FAULT_CODE_SHIFT 28 + +static inline void set_thread_fault_code(unsigned int val) +{ + struct thread_info *ti = current_thread_info(); + ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT))) + | (val << TI_FLAG_FAULT_CODE_SHIFT); +} + +static inline unsigned int get_thread_fault_code(void) +{ + struct thread_info *ti = current_thread_info(); + return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT; +} + +#else /* !__ASSEMBLY__ */ + +#define THREAD_SIZE 8192 + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg + .macro GET_THREAD_INFO reg + ldi \reg, #-THREAD_SIZE + and \reg, sp + .endm + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 /* OOM killer killed process */ +#define TIF_FREEZE 19 /* is freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) +#define _TIF_IRET (1<<TIF_IRET) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) +#define _TIF_USEDFPU (1<<TIF_USEDFPU) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1<<TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_THREAD_INFO_H */ diff --git a/arch/m32r/include/asm/timex.h b/arch/m32r/include/asm/timex.h new file mode 100644 index 000000000000..bb9fe4feb12d --- /dev/null +++ b/arch/m32r/include/asm/timex.h @@ -0,0 +1,27 @@ +#ifndef _ASM_M32R_TIMEX_H +#define _ASM_M32R_TIMEX_H + +/* + * linux/include/asm-m32r/timex.h + * + * m32r architecture timex specifications + */ + +#define CLOCK_TICK_RATE (CONFIG_BUS_CLOCK / CONFIG_TIMER_DIVIDE) +#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ + +#ifdef __KERNEL__ +/* + * Standard way to access the cycle counter. + * Currently only used on SMP. + */ + +typedef unsigned long long cycles_t; + +static __inline__ cycles_t get_cycles (void) +{ + return 0; +} +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_TIMEX_H */ diff --git a/arch/m32r/include/asm/tlb.h b/arch/m32r/include/asm/tlb.h new file mode 100644 index 000000000000..c7ebd8d48f3b --- /dev/null +++ b/arch/m32r/include/asm/tlb.h @@ -0,0 +1,20 @@ +#ifndef _M32R_TLB_H +#define _M32R_TLB_H + +/* + * x86 doesn't need any special per-pte or + * per-vma handling.. + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +/* + * .. because we flush the whole mm when it + * fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#endif /* _M32R_TLB_H */ diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h new file mode 100644 index 000000000000..0ef95307784e --- /dev/null +++ b/arch/m32r/include/asm/tlbflush.h @@ -0,0 +1,97 @@ +#ifndef _ASM_M32R_TLBFLUSH_H +#define _ASM_M32R_TLBFLUSH_H + +#include <asm/m32r.h> + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ + +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *); +extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long, + unsigned long); + +#ifndef CONFIG_SMP +#ifdef CONFIG_MMU +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) +#define flush_tlb_kernel_range(start, end) local_flush_tlb_all() +#else /* CONFIG_MMU */ +#define flush_tlb_all() do { } while (0) +#define flush_tlb_mm(mm) do { } while (0) +#define flush_tlb_page(vma, vmaddr) do { } while (0) +#define flush_tlb_range(vma, start, end) do { } while (0) +#endif /* CONFIG_MMU */ +#else /* CONFIG_SMP */ +extern void smp_flush_tlb_all(void); +extern void smp_flush_tlb_mm(struct mm_struct *); +extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, + unsigned long); + +#define flush_tlb_all() smp_flush_tlb_all() +#define flush_tlb_mm(mm) smp_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) smp_flush_tlb_page(vma, page) +#define flush_tlb_range(vma, start, end) \ + smp_flush_tlb_range(vma, start, end) +#define flush_tlb_kernel_range(start, end) smp_flush_tlb_all() +#endif /* CONFIG_SMP */ + +static __inline__ void __flush_tlb_page(unsigned long page) +{ + unsigned int tmpreg0, tmpreg1, tmpreg2; + + __asm__ __volatile__ ( + "seth %0, #high(%4) \n\t" + "st %3, @(%5, %0) \n\t" + "ldi %1, #1 \n\t" + "st %1, @(%6, %0) \n\t" + "add3 %1, %0, %7 \n\t" + ".fillinsn \n" + "1: \n\t" + "ld %2, @(%6, %0) \n\t" + "bnez %2, 1b \n\t" + "ld %0, @%1+ \n\t" + "ld %1, @%1 \n\t" + "st %2, @+%0 \n\t" + "st %2, @+%1 \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2) + : "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset), + "i" (MTOP_offset), "i" (MIDXI_offset) + : "memory" + ); +} + +static __inline__ void __flush_tlb_all(void) +{ + unsigned int tmpreg0, tmpreg1; + + __asm__ __volatile__ ( + "seth %0, #high(%2) \n\t" + "or3 %0, %0, #low(%2) \n\t" + "ldi %1, #0xc \n\t" + "st %1, @%0 \n\t" + ".fillinsn \n" + "1: \n\t" + "ld %1, @%0 \n\t" + "bnez %1, 1b \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) + : "i" (MTOP) : "memory" + ); +} + +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +#endif /* _ASM_M32R_TLBFLUSH_H */ diff --git a/arch/m32r/include/asm/topology.h b/arch/m32r/include/asm/topology.h new file mode 100644 index 000000000000..d607eb32bd7e --- /dev/null +++ b/arch/m32r/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_TOPOLOGY_H +#define _ASM_M32R_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_M32R_TOPOLOGY_H */ diff --git a/arch/m32r/include/asm/types.h b/arch/m32r/include/asm/types.h new file mode 100644 index 000000000000..bc9f7fff0ac3 --- /dev/null +++ b/arch/m32r/include/asm/types.h @@ -0,0 +1,30 @@ +#ifndef _ASM_M32R_TYPES_H +#define _ASM_M32R_TYPES_H + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* DMA addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_TYPES_H */ diff --git a/arch/m32r/include/asm/uaccess.h b/arch/m32r/include/asm/uaccess.h new file mode 100644 index 000000000000..1c7047bea200 --- /dev/null +++ b/arch/m32r/include/asm/uaccess.h @@ -0,0 +1,693 @@ +#ifndef _ASM_M32R_UACCESS_H +#define _ASM_M32R_UACCESS_H + +/* + * linux/include/asm-m32r/uaccess.h + * + * M32R version. + * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org> + */ + +/* + * User space memory access functions + */ +#include <linux/errno.h> +#include <linux/thread_info.h> +#include <asm/page.h> +#include <asm/setup.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#ifdef CONFIG_MMU + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#else /* not CONFIG_MMU */ + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(0xFFFFFFFF) +#define get_ds() (KERNEL_DS) + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline void set_fs(mm_segment_t s) +{ +} + +#endif /* not CONFIG_MMU */ + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * Test whether a block of memory is a valid user space address. + * Returns 0 if the range is valid, nonzero otherwise. + * + * This is equivalent to the following test: + * (u33)addr + (u33)size >= (u33)current->addr_limit.seg + * + * This needs 33-bit arithmetic. We have a carry... + */ +#define __range_ok(addr,size) ({ \ + unsigned long flag, roksum; \ + __chk_user_ptr(addr); \ + asm ( \ + " cmpu %1, %1 ; clear cbit\n" \ + " addx %1, %3 ; set cbit if overflow\n" \ + " subx %0, %0\n" \ + " cmpu %4, %1\n" \ + " subx %0, %5\n" \ + : "=&r" (flag), "=r" (roksum) \ + : "1" (addr), "r" ((int)(size)), \ + "r" (current_thread_info()->addr_limit.seg), "r" (0) \ + : "cbit" ); \ + flag; }) + +/** + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ +#ifdef CONFIG_MMU +#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0)) +#else +static inline int access_ok(int type, const void *addr, unsigned long size) +{ + unsigned long val = (unsigned long)addr; + + return ((val >= memory_start) && ((val + size) < memory_end)); +} +#endif /* CONFIG_MMU */ + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the uglyness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + */ + +/* Careful: we have to cast the result to the type of the pointer for sign + reasons */ +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ + __get_user_check((x),(ptr),sizeof(*(ptr))) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x,ptr) \ + __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + +/** + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err = 0; \ + unsigned long __gu_val; \ + might_sleep(); \ + __get_user_size(__gu_val,(ptr),(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ,__gu_addr,size)) \ + __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __get_user_asm(x,ptr,retval,"ub"); break; \ + case 2: __get_user_asm(x,ptr,retval,"uh"); break; \ + case 4: __get_user_asm(x,ptr,retval,""); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_asm(x, addr, err, itype) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: ld"itype" %1,@%2\n" \ + " .fillinsn\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "3: ldi %0,%3\n" \ + " seth r14,#high(2b)\n" \ + " or3 r14,r14,#low(2b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=&r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +/** + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + might_sleep(); \ + __put_user_size((x),(ptr),(size),__pu_err); \ + __pu_err; \ +}) + + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ + __put_user_size((x),__pu_addr,(size),__pu_err); \ + __pu_err; \ +}) + +#if defined(__LITTLE_ENDIAN__) +#define __put_user_u64(x, addr, err) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st %L1,@%2\n" \ + " .fillinsn\n" \ + "2: st %H1,@(4,%2)\n" \ + " .fillinsn\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "4: ldi %0,%3\n" \ + " seth r14,#high(3b)\n" \ + " or3 r14,r14,#low(3b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,4b\n" \ + " .long 2b,4b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +#elif defined(__BIG_ENDIAN__) +#define __put_user_u64(x, addr, err) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st %H1,@%2\n" \ + " .fillinsn\n" \ + "2: st %L1,@(4,%2)\n" \ + " .fillinsn\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "4: ldi %0,%3\n" \ + " seth r14,#high(3b)\n" \ + " or3 r14,r14,#low(3b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,4b\n" \ + " .long 2b,4b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") +#else +#error no endian defined +#endif + +extern void __put_user_bad(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __put_user_asm(x,ptr,retval,"b"); break; \ + case 2: __put_user_asm(x,ptr,retval,"h"); break; \ + case 4: __put_user_asm(x,ptr,retval,""); break; \ + case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\ + default: __put_user_bad(); \ + } \ +} while (0) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ +#define __put_user_asm(x, addr, err, itype) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st"itype" %1,@%2\n" \ + " .fillinsn\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "3: ldi %0,%3\n" \ + " seth r14,#high(2b)\n" \ + " or3 r14,r14,#low(2b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +/* + * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault + * we return the initial request size (1, 2 or 4), as copy_*_user should do. + * If a store crosses a page boundary and gets a fault, the m32r will not write + * anything, so this is accurate. + */ + +/* + * Copy To/From Userspace + */ + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied. */ +#define __copy_user(to,from,size) \ +do { \ + unsigned long __dst, __src, __c; \ + __asm__ __volatile__ ( \ + " mv r14, %0\n" \ + " or r14, %1\n" \ + " beq %0, %1, 9f\n" \ + " beqz %2, 9f\n" \ + " and3 r14, r14, #3\n" \ + " bnez r14, 2f\n" \ + " and3 %2, %2, #3\n" \ + " beqz %3, 2f\n" \ + " addi %0, #-4 ; word_copy \n" \ + " .fillinsn\n" \ + "0: ld r14, @%1+\n" \ + " addi %3, #-1\n" \ + " .fillinsn\n" \ + "1: st r14, @+%0\n" \ + " bnez %3, 0b\n" \ + " beqz %2, 9f\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "2: ldb r14, @%1 ; byte_copy \n" \ + " .fillinsn\n" \ + "3: stb r14, @%0\n" \ + " addi %1, #1\n" \ + " addi %2, #-1\n" \ + " addi %0, #1\n" \ + " bnez %2, 2b\n" \ + " .fillinsn\n" \ + "9:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "5: addi %3, #1\n" \ + " addi %1, #-4\n" \ + " .fillinsn\n" \ + "6: slli %3, #2\n" \ + " add %2, %3\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "7: seth r14, #high(9b)\n" \ + " or3 r14, r14, #low(9b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,6b\n" \ + " .long 1b,5b\n" \ + " .long 2b,9b\n" \ + " .long 3b,9b\n" \ + ".previous\n" \ + : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ + "=&r" (__c) \ + : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ + : "r14", "memory"); \ +} while (0) + +#define __copy_user_zeroing(to,from,size) \ +do { \ + unsigned long __dst, __src, __c; \ + __asm__ __volatile__ ( \ + " mv r14, %0\n" \ + " or r14, %1\n" \ + " beq %0, %1, 9f\n" \ + " beqz %2, 9f\n" \ + " and3 r14, r14, #3\n" \ + " bnez r14, 2f\n" \ + " and3 %2, %2, #3\n" \ + " beqz %3, 2f\n" \ + " addi %0, #-4 ; word_copy \n" \ + " .fillinsn\n" \ + "0: ld r14, @%1+\n" \ + " addi %3, #-1\n" \ + " .fillinsn\n" \ + "1: st r14, @+%0\n" \ + " bnez %3, 0b\n" \ + " beqz %2, 9f\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "2: ldb r14, @%1 ; byte_copy \n" \ + " .fillinsn\n" \ + "3: stb r14, @%0\n" \ + " addi %1, #1\n" \ + " addi %2, #-1\n" \ + " addi %0, #1\n" \ + " bnez %2, 2b\n" \ + " .fillinsn\n" \ + "9:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "5: addi %3, #1\n" \ + " addi %1, #-4\n" \ + " .fillinsn\n" \ + "6: slli %3, #2\n" \ + " add %2, %3\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "7: ldi r14, #0 ; store zero \n" \ + " .fillinsn\n" \ + "8: addi %2, #-1\n" \ + " stb r14, @%0 ; ACE? \n" \ + " addi %0, #1\n" \ + " bnez %2, 8b\n" \ + " seth r14, #high(9b)\n" \ + " or3 r14, r14, #low(9b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,6b\n" \ + " .long 1b,5b\n" \ + " .long 2b,7b\n" \ + " .long 3b,7b\n" \ + ".previous\n" \ + : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ + "=&r" (__c) \ + : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ + : "r14", "memory"); \ +} while (0) + + +/* We let the __ versions of copy_from/to_user inline, because they're often + * used in fast paths and have only a small space overhead. + */ +static inline unsigned long __generic_copy_from_user_nocheck(void *to, + const void __user *from, unsigned long n) +{ + __copy_user_zeroing(to,from,n); + return n; +} + +static inline unsigned long __generic_copy_to_user_nocheck(void __user *to, + const void *from, unsigned long n) +{ + __copy_user(to,from,n); + return n; +} + +unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long); +unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long); + +/** + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define __copy_to_user(to,from,n) \ + __generic_copy_to_user_nocheck((to),(from),(n)) + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/** + * copy_to_user: - Copy a block of data into user space. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define copy_to_user(to,from,n) \ +({ \ + might_sleep(); \ + __generic_copy_to_user((to),(from),(n)); \ +}) + +/** + * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define __copy_from_user(to,from,n) \ + __generic_copy_from_user_nocheck((to),(from),(n)) + +/** + * copy_from_user: - Copy a block of data from user space. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define copy_from_user(to,from,n) \ +({ \ + might_sleep(); \ + __generic_copy_from_user((to),(from),(n)); \ +}) + +long __must_check strncpy_from_user(char *dst, const char __user *src, + long count); +long __must_check __strncpy_from_user(char *dst, + const char __user *src, long count); + +/** + * __clear_user: - Zero a block of memory in user space, with less checking. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +unsigned long __clear_user(void __user *mem, unsigned long len); + +/** + * clear_user: - Zero a block of memory in user space. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +unsigned long clear_user(void __user *mem, unsigned long len); + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) +long strnlen_user(const char __user *str, long n); + +#endif /* _ASM_M32R_UACCESS_H */ diff --git a/arch/m32r/include/asm/ucontext.h b/arch/m32r/include/asm/ucontext.h new file mode 100644 index 000000000000..09324741eec3 --- /dev/null +++ b/arch/m32r/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M32R_UCONTEXT_H +#define _ASM_M32R_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_M32R_UCONTEXT_H */ diff --git a/arch/m32r/include/asm/unaligned.h b/arch/m32r/include/asm/unaligned.h new file mode 100644 index 000000000000..377eb20d1ec6 --- /dev/null +++ b/arch/m32r/include/asm/unaligned.h @@ -0,0 +1,18 @@ +#ifndef _ASM_M32R_UNALIGNED_H +#define _ASM_M32R_UNALIGNED_H + +#if defined(__LITTLE_ENDIAN__) +# include <linux/unaligned/le_memmove.h> +# include <linux/unaligned/be_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# include <linux/unaligned/be_memmove.h> +# include <linux/unaligned/le_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_M32R_UNALIGNED_H */ diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h new file mode 100644 index 000000000000..cf701c933249 --- /dev/null +++ b/arch/m32r/include/asm/unistd.h @@ -0,0 +1,389 @@ +#ifndef _ASM_M32R_UNISTD_H +#define _ASM_M32R_UNISTD_H + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +/* 16 is unused */ +/* 17 is unused */ +/* 18 is unused */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +/* 23 is unused */ +/* 24 is unused */ +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +/* 28 is unused */ +#define __NR_pause 29 +#define __NR_utime 30 +/* 31 is unused */ +#define __NR_cachectl 32 /* old #define __NR_gtty 32*/ +#define __NR_access 33 +/* 34 is unused */ +/* 35 is unused */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +/* 44 is unused */ +#define __NR_brk 45 +/* 46 is unused */ +/* 47 is unused (getgid16) */ +/* 48 is unused */ +/* 49 is unused */ +/* 50 is unused */ +#define __NR_acct 51 +#define __NR_umount2 52 +/* 53 is unused */ +#define __NR_ioctl 54 +/* 55 is unused (fcntl) */ +/* 56 is unused */ +#define __NR_setpgid 57 +/* 58 is unused */ +/* 59 is unused */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +/* 67 is unused */ +/* 68 is unused*/ +/* 69 is unused*/ +/* 70 is unused */ +/* 71 is unused */ +/* 72 is unused */ +/* 73 is unused */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +/* 76 is unused (old getrlimit) */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +/* 80 is unused */ +/* 81 is unused */ +/* 82 is unused */ +#define __NR_symlink 83 +/* 84 is unused */ +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +/* 89 is unused */ +/* 90 is unused */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +/* 95 is unused */ +#define __NR_getpriority 96 +#define __NR_setpriority 97 +/* 98 is unused */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 +/* 101 is unused */ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +/* 109 is unused */ +/* 110 is unused */ +#define __NR_vhangup 111 +/* 112 is unused */ +/* 113 is unused */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +/* 119 is unused */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +/* 123 is unused */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +/* 126 is unused */ +/* 127 is unused */ +#define __NR_init_module 128 +#define __NR_delete_module 129 +/* 130 is unused */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +/* 137 is unused */ +/* 138 is unused */ +/* 139 is unused */ +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +/* 164 is unused */ +/* 165 is unused */ +#define __NR_tas 166 +/* 167 is unused */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +/* 170 is unused */ +/* 171 is unused */ +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +/* 182 is unused */ +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +/* 188 is unused */ +/* 189 is unused */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 222 is unused */ +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 +/* 251 is unused */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* 285 is unused */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +/* #define __NR_timerfd 322 removed */ +#define __NR_eventfd 323 +#define __NR_fallocate 324 + +#ifdef __KERNEL__ + +#define NR_syscalls 325 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/ +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_RT_SIGACTION + +#define __IGNORE_lchown +#define __IGNORE_setuid +#define __IGNORE_getuid +#define __IGNORE_setgid +#define __IGNORE_getgid +#define __IGNORE_geteuid +#define __IGNORE_getegid +#define __IGNORE_fcntl +#define __IGNORE_setreuid +#define __IGNORE_setregid +#define __IGNORE_getrlimit +#define __IGNORE_getgroups +#define __IGNORE_setgroups +#define __IGNORE_select +#define __IGNORE_mmap +#define __IGNORE_fchown +#define __IGNORE_setfsuid +#define __IGNORE_setfsgid +#define __IGNORE_setresuid +#define __IGNORE_getresuid +#define __IGNORE_setresgid +#define __IGNORE_getresgid +#define __IGNORE_chown + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_UNISTD_H */ diff --git a/arch/m32r/include/asm/user.h b/arch/m32r/include/asm/user.h new file mode 100644 index 000000000000..03b3c11c2aff --- /dev/null +++ b/arch/m32r/include/asm/user.h @@ -0,0 +1,52 @@ +#ifndef _ASM_M32R_USER_H +#define _ASM_M32R_USER_H + +#include <linux/types.h> +#include <asm/ptrace.h> +#include <asm/page.h> + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). + * + * The actual file contents are as follows: + * UPAGE: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page. + * DATA: The data area is stored. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * STACK: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these off in order to be + * able to write an integer number of pages. + */ + +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_M32R_USER_H */ diff --git a/arch/m32r/include/asm/vga.h b/arch/m32r/include/asm/vga.h new file mode 100644 index 000000000000..a1b63061c06f --- /dev/null +++ b/arch/m32r/include/asm/vga.h @@ -0,0 +1,20 @@ +#ifndef _ASM_M32R_VGA_H +#define _ASM_M32R_VGA_H + +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares <mj@ucw.cz> + */ + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* _ASM_M32R_VGA_H */ diff --git a/arch/m32r/include/asm/xor.h b/arch/m32r/include/asm/xor.h new file mode 100644 index 000000000000..6d525259df3e --- /dev/null +++ b/arch/m32r/include/asm/xor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_XOR_H +#define _ASM_M32R_XOR_H + +#include <asm-generic/xor.h> + +#endif /* _ASM_M32R_XOR_H */ diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h index 4fcf3384e259..aa6a38886391 100644 --- a/arch/mn10300/include/asm/bug.h +++ b/arch/mn10300/include/asm/bug.h @@ -11,10 +11,12 @@ #ifndef _ASM_BUG_H #define _ASM_BUG_H +#ifdef CONFIG_BUG + /* * Tell the user there is some problem. */ -#define _debug_bug_trap() \ +#define BUG() \ do { \ asm volatile( \ " syscall 15 \n" \ @@ -25,11 +27,11 @@ do { \ : \ : "i"(__FILE__), "i"(__LINE__) \ ); \ -} while (0) - -#define BUG() _debug_bug_trap() +} while (1) #define HAVE_ARCH_BUG +#endif /* CONFIG_BUG */ + #include <asm-generic/bug.h> #endif /* _ASM_BUG_H */ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 543a4f98695d..fef5b434dadc 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -344,6 +344,8 @@ #define __NR_dup3 331 #define __NR_pipe2 332 #define __NR_inotify_init1 333 +#define __NR_preadv 334 +#define __NR_pwritev 335 #ifdef __KERNEL__ diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 34ab5a293153..3dc3e462f92a 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -723,6 +723,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 335 */ nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 71414e19fd16..79890edfd67a 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_bus(&_etext); data_resource.end = virt_to_bus(&_edata)-1; -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT); kstart_pfn = PFN_UP(__pa(&_text)); free_pfn = PFN_UP(__pa(&_end)); diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 27b70d8a359c..aeb3cff95f63 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(void *p) { struct vtimer_list *timer; u64 expires; } *args = p; - mod_virt_timer(args->timer, args->expires); + mod_virt_timer_periodic(args->timer, args->expires); } #define APPLDATA_ADD_TIMER 0 diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h new file mode 100644 index 000000000000..07836a2e5222 --- /dev/null +++ b/arch/s390/include/asm/cpuid.h @@ -0,0 +1,25 @@ +/* + * Copyright IBM Corp. 2000,2009 + * Author(s): Hartmut Penner <hp@de.ibm.com>, + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Christian Ehrhardt <ehrhardt@de.ibm.com> + */ + +#ifndef _ASM_S390_CPUID_H_ +#define _ASM_S390_CPUID_H_ + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +typedef struct +{ + unsigned int version : 8; + unsigned int ident : 24; + unsigned int machine : 16; + unsigned int unused : 16; +} __attribute__ ((packed)) cpuid_t; + +#endif /* _ASM_S390_CPUID_H_ */ diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index c6e674f5fca9..54ea39f96ecd 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -15,6 +15,7 @@ #define ASM_KVM_HOST_H #include <linux/kvm_host.h> #include <asm/debug.h> +#include <asm/cpuid.h> #define KVM_MAX_VCPUS 64 #define KVM_MEMORY_SLOTS 32 diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index b349f1c7fdfa..3aeca492b147 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -66,6 +66,7 @@ #define __LC_USER_EXEC_ASCE 0x02ac #define __LC_CPUID 0x02b0 #define __LC_INT_CLOCK 0x02c8 +#define __LC_MACHINE_FLAGS 0x02d8 #define __LC_IRB 0x0300 #define __LC_PFAULT_INTPARM 0x0080 #define __LC_CPU_TIMER_SAVE_AREA 0x00d8 @@ -110,6 +111,7 @@ #define __LC_CPUID 0x0320 #define __LC_INT_CLOCK 0x0340 #define __LC_VDSO_PER_CPU 0x0350 +#define __LC_MACHINE_FLAGS 0x0358 #define __LC_IRB 0x0380 #define __LC_PASTE 0x03c0 #define __LC_PFAULT_INTPARM 0x11b8 @@ -127,9 +129,9 @@ #ifndef __ASSEMBLY__ -#include <asm/processor.h> +#include <asm/cpuid.h> +#include <asm/ptrace.h> #include <linux/types.h> -#include <asm/sigp.h> void restart_int_handler(void); void ext_int_handler(void); @@ -277,7 +279,8 @@ struct _lowcore __u32 ext_call_fast; /* 0x02c4 */ __u64 int_clock; /* 0x02c8 */ __u64 clock_comparator; /* 0x02d0 */ - __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */ + __u32 machine_flags; /* 0x02d8 */ + __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ @@ -381,7 +384,8 @@ struct _lowcore __u64 int_clock; /* 0x0340 */ __u64 clock_comparator; /* 0x0348 */ __u64 vdso_per_cpu_data; /* 0x0350 */ - __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */ + __u64 machine_flags; /* 0x0358 */ + __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */ /* Interrupt response block. */ __u8 irb[64]; /* 0x0380 */ diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 61862b3ac794..c139fa7b8e89 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -14,7 +14,10 @@ #define __ASM_S390_PROCESSOR_H #include <linux/linkage.h> +#include <asm/cpuid.h> +#include <asm/page.h> #include <asm/ptrace.h> +#include <asm/setup.h> #ifdef __KERNEL__ /* @@ -23,20 +26,6 @@ */ #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; }) -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -typedef struct -{ - unsigned int version : 8; - unsigned int ident : 24; - unsigned int machine : 16; - unsigned int unused : 16; -} __attribute__ ((packed)) cpuid_t; - static inline void get_cpu_id(cpuid_t *ptr) { asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index f1b051630c50..539263fc9ab9 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -313,8 +313,6 @@ typedef struct #ifdef __KERNEL__ -#include <asm/setup.h> -#include <asm/page.h> /* * The pt_regs struct defines the way the registers are stored on diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index e8bd6ac22c99..38b0fc221ed7 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ +#include <asm/lowcore.h> #include <asm/types.h> #define PARMAREA 0x10400 @@ -63,7 +64,6 @@ extern unsigned int s390_noexec; /* * Machine features detected in head.S */ -extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) @@ -77,28 +77,28 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_HPAGE (1UL << 10) #define MACHINE_FLAG_PFMF (1UL << 11) -#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) -#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) -#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) +#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) +#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) +#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C) #ifndef __s390x__ -#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE) -#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP) +#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE) +#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP) #define MACHINE_HAS_IDTE (0) #define MACHINE_HAS_DIAG44 (1) -#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG) +#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG) #define MACHINE_HAS_MVCOS (0) #define MACHINE_HAS_HPAGE (0) #define MACHINE_HAS_PFMF (0) #else /* __s390x__ */ #define MACHINE_HAS_IEEE (1) #define MACHINE_HAS_CSP (1) -#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE) -#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44) +#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE) +#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44) #define MACHINE_HAS_MVPG (1) -#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS) -#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE) -#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF) +#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS) +#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE) +#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF) #endif /* __s390x__ */ #define ZFCPDUMP_HSA_SIZE (32UL<<20) diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index c544aa524535..461f2abd2e6f 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -31,8 +31,9 @@ #define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER) #ifndef __ASSEMBLY__ -#include <asm/processor.h> #include <asm/lowcore.h> +#include <asm/page.h> +#include <asm/processor.h> /* * low level task data that entry.S needs immediate access to diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h index e4bcab739c19..814243cafdfe 100644 --- a/arch/s390/include/asm/timer.h +++ b/arch/s390/include/asm/timer.h @@ -41,6 +41,7 @@ extern void init_virt_timer(struct vtimer_list *timer); extern void add_virt_timer(void *new); extern void add_virt_timer_periodic(void *new); extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); +extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires); extern int del_virt_timer(struct vtimer_list *timer); extern void init_cpu_vtimer(void); diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index d744c3d62de5..cc21e3e20fd7 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -11,6 +11,9 @@ #ifndef _ASM_S390_TIMEX_H #define _ASM_S390_TIMEX_H +/* The value of the TOD clock for 1.1.1970. */ +#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL + /* Inline functions for clock register access. */ static inline int set_clock(__u64 time) { @@ -85,4 +88,6 @@ int get_sync_clock(unsigned long long *clock); void init_cpu_timer(void); unsigned long long monotonic_clock(void); +extern u64 sched_clock_base_cc; + #endif diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index c8ad350d1444..f0f19e6ace6c 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -265,7 +265,9 @@ #define __NR_pipe2 325 #define __NR_dup3 326 #define __NR_epoll_create1 327 -#define NR_syscalls 328 +#define __NR_preadv 328 +#define __NR_pwritev 329 +#define NR_syscalls 330 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 67a60016babb..fa9905ce7d0b 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -27,6 +27,8 @@ int main(void) DEFINE(__TI_flags, offsetof(struct thread_info, flags)); DEFINE(__TI_cpu, offsetof(struct thread_info, cpu)); DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count)); + DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer)); + DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer)); BLANK(); DEFINE(__PT_ARGS, offsetof(struct pt_regs, args)); DEFINE(__PT_PSW, offsetof(struct pt_regs, psw)); diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 87cf5a79a351..fb38af6316bb 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1805,3 +1805,21 @@ compat_sys_keyctl_wrapper: llgfr %r5,%r5 # u32 llgfr %r6,%r6 # u32 jg compat_sys_keyctl # branch to system call + + .globl compat_sys_preadv_wrapper +compat_sys_preadv_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_preadv # branch to system call + + .globl compat_sys_pwritev_wrapper +compat_sys_pwritev_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_pwritev # branch to system call diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 4d221c81c849..cf09948faad6 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -34,8 +34,25 @@ char kernel_nss_name[NSS_NAME_SIZE + 1]; +static unsigned long machine_flags; + static void __init setup_boot_command_line(void); +/* + * Get the TOD clock running. + */ +static void __init reset_tod_clock(void) +{ + u64 time; + + if (store_clock(&time) == 0) + return; + /* TOD clock not running. Set the clock to Unix Epoch. */ + if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) + disabled_wait(0); + + sched_clock_base_cc = TOD_UNIX_EPOCH; +} #ifdef CONFIG_SHARED_KERNEL int __init savesys_ipl_nss(char *cmd, const int cmdlen); @@ -370,6 +387,7 @@ static void __init setup_boot_command_line(void) */ void __init startup_init(void) { + reset_tod_clock(); ipl_save_parameters(); rescue_initrd(); clear_bss_section(); @@ -391,5 +409,6 @@ void __init startup_init(void) setup_hpage(); sclp_facilities_detect(); detect_memory_layout(memory_chunk); + S390_lowcore.machine_flags = machine_flags; lockdep_on(); } diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1268aa2991bf..f3e275934213 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -837,16 +837,29 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) l %r15,__LC_SAVE_AREA+60 # load ksp lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs lam %a0,%a15,__LC_AREGS_SAVE_AREA lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + l %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on basr %r14,0 l %r14,restart_addr-.(%r14) br %r14 # branch to start_secondary restart_addr: .long start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index c6fbde13971a..84a105838e03 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -831,14 +831,27 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) lg %r15,__LC_SAVE_AREA+120 # load ksp lghi %r10,__LC_CREGS_SAVE_AREA lctlg %c0,%c15,0(%r10) # get new ctl regs lghi %r10,__LC_AREGS_SAVE_AREA lam %a0,%a15,0(%r10) lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + lg %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on jg start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 1046c2c9f8d1..bba14494ee00 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -471,7 +471,12 @@ startup:basr %r13,0 # get base .LPG0: xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 - + l %r1,5f-.LPG0(%r13) + stck 0(%r1) + spt 6f-.LPG0(%r13) + mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1) + mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) + mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13) #ifndef CONFIG_MARCH_G5 # check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10} stidp __LC_CPUID # store cpuid @@ -496,9 +501,13 @@ startup:basr %r13,0 # get base brct %r0,0b #endif - l %r13,0f-.LPG0(%r13) + l %r13,4f-.LPG0(%r13) b 0(%r13) -0: .long startup_continue + .align 4 +4: .long startup_continue +5: .long sched_clock_base_cc + .align 8 +6: .long 0x7fffffff,0xffffffff # # params at 10400 (setup.h) diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index 4bfdc421d7e9..28cf196ba775 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/errno.h> +#include <linux/hardirq.h> #include <linux/time.h> #include <linux/module.h> #include <asm/lowcore.h> @@ -253,7 +254,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) struct mci *mci; int umode; - lockdep_off(); + nmi_enter(); s390_idle_check(); mci = (struct mci *) &S390_lowcore.mcck_interruption_code; @@ -363,7 +364,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) mcck->warning = 1; set_thread_flag(TIF_MCCK_PENDING); } - lockdep_on(); + nmi_exit(); } static int __init machine_check_init(void) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 06201b93cbbf..7402b6a39ead 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -82,9 +82,6 @@ EXPORT_SYMBOL(console_devno); unsigned int console_irq = -1; EXPORT_SYMBOL(console_irq); -unsigned long machine_flags; -EXPORT_SYMBOL(machine_flags); - unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; @@ -426,6 +423,7 @@ setup_lowcore(void) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; lc->current_task = (unsigned long) init_thread_union.thread_info.task; lc->thread_info = (unsigned long) &init_thread_union; + lc->machine_flags = S390_lowcore.machine_flags; #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) { lc->extended_save_area_addr = (__u32) @@ -436,6 +434,14 @@ setup_lowcore(void) #else lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; #endif + lc->sync_enter_timer = S390_lowcore.sync_enter_timer; + lc->async_enter_timer = S390_lowcore.async_enter_timer; + lc->exit_timer = S390_lowcore.exit_timer; + lc->user_timer = S390_lowcore.user_timer; + lc->system_timer = S390_lowcore.system_timer; + lc->steal_timer = S390_lowcore.steal_timer; + lc->last_update_timer = S390_lowcore.last_update_timer; + lc->last_update_clock = S390_lowcore.last_update_clock; set_prefix((u32)(unsigned long) lc); lowcore_ptr[0] = lc; } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 006ed5016eb4..a985a3ba4401 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -571,6 +571,7 @@ int __cpuinit __cpu_up(unsigned int cpu) cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_nr = cpu; cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce; + cpu_lowcore->machine_flags = S390_lowcore.machine_flags; eieio(); while (signal_processor(cpu, sigp_restart) == sigp_busy) @@ -590,7 +591,8 @@ static int __init setup_possible_cpus(char *s) int pcpus, cpu; pcpus = simple_strtoul(s, NULL, 0); - for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++) + init_cpu_possible(cpumask_of(0)); + for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++) set_cpu_possible(cpu, true); return 0; } diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index fe5b25a988ab..2c7739fe70b1 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -336,3 +336,5 @@ SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) +SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) +SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index f72d41068dc2..6ded50dfa75a 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -52,9 +52,6 @@ #define USECS_PER_JIFFY ((unsigned long) 1000000/HZ) #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12) -/* The value of the TOD clock for 1.1.1970. */ -#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL - /* * Create a small time difference between the timer interrupts * on the different cpus to avoid lock contention. @@ -63,9 +60,10 @@ #define TICK_SIZE tick +u64 sched_clock_base_cc = -1; /* Force to data section. */ + static ext_int_info_t ext_int_info_cc; static ext_int_info_t ext_int_etr_cc; -static u64 sched_clock_base_cc; static DEFINE_PER_CPU(struct clock_event_device, comparators); @@ -195,22 +193,12 @@ static void timing_alert_interrupt(__u16 code) static void etr_reset(void); static void stp_reset(void); -/* - * Get the TOD clock running. - */ -static u64 __init reset_tod_clock(void) +unsigned long read_persistent_clock(void) { - u64 time; - - etr_reset(); - stp_reset(); - if (store_clock(&time) == 0) - return time; - /* TOD clock not running. Set the clock to Unix Epoch. */ - if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) - panic("TOD clock not operational."); + struct timespec ts; - return TOD_UNIX_EPOCH; + tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts); + return ts.tv_sec; } static cycle_t read_tod_clock(void) @@ -265,12 +253,13 @@ void update_vsyscall_tz(void) */ void __init time_init(void) { - sched_clock_base_cc = reset_tod_clock(); + struct timespec ts; + unsigned long flags; + cycle_t now; - /* set xtime */ - tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + /* Reset time synchronization interfaces. */ + etr_reset(); + stp_reset(); /* request the clock comparator external interrupt */ if (register_early_external_interrupt(0x1004, @@ -278,17 +267,38 @@ void __init time_init(void) &ext_int_info_cc) != 0) panic("Couldn't request external interrupt 0x1004"); - if (clocksource_register(&clocksource_tod) != 0) - panic("Could not register TOD clock source"); - /* request the timing alert external interrupt */ if (register_early_external_interrupt(0x1406, timing_alert_interrupt, &ext_int_etr_cc) != 0) panic("Couldn't request external interrupt 0x1406"); + if (clocksource_register(&clocksource_tod) != 0) + panic("Could not register TOD clock source"); + + /* + * The TOD clock is an accurate clock. The xtime should be + * initialized in a way that the difference between TOD and + * xtime is reasonably small. Too bad that timekeeping_init + * sets xtime.tv_nsec to zero. In addition the clock source + * change from the jiffies clock source to the TOD clock + * source add another error of up to 1/HZ second. The same + * function sets wall_to_monotonic to a value that is too + * small for /proc/uptime to be accurate. + * Reset xtime and wall_to_monotonic to sane values. + */ + write_seqlock_irqsave(&xtime_lock, flags); + now = get_clock(); + tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime); + clocksource_tod.cycle_last = now; + clocksource_tod.raw_time = xtime; + tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts); + set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec); + write_sequnlock_irqrestore(&xtime_lock, flags); + /* Enable TOD clock interrupts on the boot cpu. */ init_cpu_timer(); + /* Enable cpu timer interrupts on the boot cpu. */ vtime_init(); } @@ -1423,6 +1433,7 @@ static void *stp_page; static void stp_work_fn(struct work_struct *work); static DEFINE_MUTEX(stp_work_mutex); static DECLARE_WORK(stp_work, stp_work_fn); +static struct timer_list stp_timer; static int __init early_parse_stp(char *p) { @@ -1454,10 +1465,16 @@ static void __init stp_reset(void) } } +static void stp_timeout(unsigned long dummy) +{ + queue_work(time_sync_wq, &stp_work); +} + static int __init stp_init(void) { if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags)) return 0; + setup_timer(&stp_timer, stp_timeout, 0UL); time_init_wq(); if (!stp_online) return 0; @@ -1565,6 +1582,7 @@ static void stp_work_fn(struct work_struct *work) if (!stp_online) { chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000); + del_timer_sync(&stp_timer); goto out_unlock; } @@ -1586,6 +1604,13 @@ static void stp_work_fn(struct work_struct *work) stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map); put_online_cpus(); + if (!check_sync_clock()) + /* + * There is a usable clock but the synchonization failed. + * Retry after a second. + */ + mod_timer(&stp_timer, jiffies + HZ); + out_unlock: mutex_unlock(&stp_work_mutex); } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index ecf0304e61c1..38ea92ff04f9 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -134,6 +134,8 @@ void vtime_start_cpu(void) /* Account time spent with enabled wait psw loaded as idle time. */ idle_time = S390_lowcore.int_clock - idle->idle_enter; account_idle_time(idle_time); + S390_lowcore.steal_timer += + idle->idle_enter - S390_lowcore.last_update_clock; S390_lowcore.last_update_clock = S390_lowcore.int_clock; /* Account system time spent going idle. */ @@ -425,17 +427,7 @@ void add_virt_timer_periodic(void *new) } EXPORT_SYMBOL(add_virt_timer_periodic); -/* - * If we change a pending timer the function must be called on the CPU - * where the timer is running on, e.g. by smp_call_function_single() - * - * The original mod_timer adds the timer if it is not pending. For - * compatibility we do the same. The timer will be added on the current - * CPU as a oneshot timer. - * - * returns whether it has modified a pending timer (1) or not (0) - */ -int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic) { struct vtimer_queue *vq; unsigned long flags; @@ -444,39 +436,35 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) BUG_ON(!timer->function); BUG_ON(!expires || expires > VTIMER_MAX_SLICE); - /* - * This is a common optimization triggered by the - * networking code - if the timer is re-modified - * to be the same thing then just return: - */ if (timer->expires == expires && vtimer_pending(timer)) return 1; cpu = get_cpu(); vq = &per_cpu(virt_cpu_timer, cpu); - /* check if we run on the right CPU */ - BUG_ON(timer->cpu != cpu); - /* disable interrupts before test if timer is pending */ spin_lock_irqsave(&vq->lock, flags); /* if timer isn't pending add it on the current CPU */ if (!vtimer_pending(timer)) { spin_unlock_irqrestore(&vq->lock, flags); - /* we do not activate an interval timer with mod_virt_timer */ - timer->interval = 0; + + if (periodic) + timer->interval = expires; + else + timer->interval = 0; timer->expires = expires; timer->cpu = cpu; internal_add_vtimer(timer); return 0; } + /* check if we run on the right CPU */ + BUG_ON(timer->cpu != cpu); + list_del_init(&timer->entry); timer->expires = expires; - - /* also change the interval if we have an interval timer */ - if (timer->interval) + if (periodic) timer->interval = expires; /* the timer can't expire anymore so we can release the lock */ @@ -484,9 +472,32 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) internal_add_vtimer(timer); return 1; } + +/* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 0); +} EXPORT_SYMBOL(mod_virt_timer); /* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 1); +} +EXPORT_SYMBOL(mod_virt_timer_periodic); + +/* * delete a virtual timer * * returns whether the deleted timer was pending (1) or not (0) @@ -516,16 +527,8 @@ EXPORT_SYMBOL(del_virt_timer); */ void init_cpu_vtimer(void) { - struct thread_info *ti = current_thread_info(); struct vtimer_queue *vq; - S390_lowcore.user_timer = ti->user_timer; - S390_lowcore.system_timer = ti->system_timer; - - /* kick the virtual timer */ - asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock)); - asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer)); - /* initialize per cpu vtimer structure */ vq = &__get_cpu_var(virt_cpu_timer); INIT_LIST_HEAD(&vq->list); diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 58dfc02c7af1..e3a7e36639ef 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -63,6 +63,15 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { + /* + * The shift for mmap2 is constant, regardless of PAGE_SIZE + * setting. + */ + if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) + return -EINVAL; + + pgoff >>= PAGE_SHIFT - 12; + return do_mmap2(addr, len, prot, flags, fd, pgoff); } diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h index ce465975a6a5..bb91b1248cd1 100644 --- a/arch/sparc/include/asm/atomic_32.h +++ b/arch/sparc/include/asm/atomic_32.h @@ -15,6 +15,8 @@ #ifdef __KERNEL__ +#include <asm/system.h> + #define ATOMIC_INIT(i) { (i) } extern int __atomic_add_return(int, atomic_t *); diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 6ce5d2598a09..adf5f273868a 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1183,8 +1183,7 @@ out_free_txq: free_queue(lp->tx_num_entries, lp->tx_base); out_free_mssbuf: - if (mssbuf) - kfree(mssbuf); + kfree(mssbuf); out_free_iommu: ldc_iommu_release(lp); @@ -1217,8 +1216,7 @@ void ldc_free(struct ldc_channel *lp) hlist_del(&lp->list); - if (lp->mssbuf) - kfree(lp->mssbuf); + kfree(lp->mssbuf); ldc_iommu_release(lp); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 708e12a26b05..f7642e5a94db 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -118,9 +118,9 @@ void __cpuinit smp_callin(void) while (!cpu_isset(cpuid, smp_commenced_mask)) rmb(); - ipi_call_lock(); + ipi_call_lock_irq(); cpu_set(cpuid, cpu_online_map); - ipi_call_unlock(); + ipi_call_unlock_irq(); /* idle thread is expected to have preempt disabled */ preempt_disable(); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc25b9f5e4cd..c9086e6307a5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -353,6 +353,7 @@ config X86_UV bool "SGI Ultraviolet" depends on X86_64 depends on X86_EXTENDED_PLATFORM + depends on NUMA select X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 924e156a85ab..8130334329c0 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -506,6 +506,7 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR + depends on BROKEN ---help--- This adds a ptrace interface to the hardware's branch trace store. diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h index 2cd07b9422f4..7af14e512f97 100644 --- a/arch/x86/include/asm/pat.h +++ b/arch/x86/include/asm/pat.h @@ -18,9 +18,5 @@ extern int free_memtype(u64 start, u64 end); extern int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flag); -extern void map_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); -extern void unmap_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); #endif /* _ASM_X86_PAT_H */ diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index db68ac8a5ac2..2cae46c7c8a2 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -17,6 +17,11 @@ /* ========================================================================= */ /* UVH_BAU_DATA_CONFIG */ /* ========================================================================= */ +#define UVH_LB_BAU_MISC_CONTROL 0x320170UL +#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL +/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */ #define UVH_BAU_DATA_CONFIG 0x61680UL #define UVH_BAU_DATA_CONFIG_32 0x0438 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318436e8..de1a50af807b 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -549,7 +549,8 @@ void __init uv_system_init(void) unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; int max_pnode = 0; - unsigned long mmr_base, present; + unsigned long mmr_base, present, paddr; + unsigned short pnode_mask; map_low_mmrs(); @@ -592,6 +593,7 @@ void __init uv_system_init(void) } } + pnode_mask = (1 << n_val) - 1; node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_upper = (((unsigned long)node_id.s.node_id) & ~((1 << n_val) - 1)) << m_val; @@ -615,7 +617,7 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; @@ -631,6 +633,16 @@ void __init uv_system_init(void) lcpu, blade); } + /* Add blade/pnode info for nodes without cpus */ + for_each_online_node(nid) { + if (uv_node_to_blade[nid] >= 0) + continue; + paddr = node_start_pfn(nid) << PAGE_SHIFT; + pnode = (paddr >> m_val) & pnode_mask; + blade = boot_pnode_to_blade(pnode); + uv_node_to_blade[nid] = blade; + } + map_gru_high(max_pnode); map_mmr_high(max_pnode); map_config_high(max_pnode); diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c index f63882728d91..63a88e1f987d 100644 --- a/arch/x86/kernel/bios_uv.c +++ b/arch/x86/kernel/bios_uv.c @@ -182,7 +182,8 @@ void uv_bios_init(void) memcpy(&uv_systab, tab, sizeof(struct uv_systab)); iounmap(tab); - printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision); + printk(KERN_INFO "EFI UV System Table Revision %d\n", + uv_systab.revision); } #else /* !CONFIG_EFI */ diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 2e0eb4140951..98c470c069d1 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -380,8 +380,6 @@ static int mc_sysdev_add(struct sys_device *sys_dev) return err; err = microcode_init_cpu(cpu); - if (err) - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); return err; } diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 34f12e9996ed..221a3853e268 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -50,7 +50,7 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags); } -struct dma_map_ops swiotlb_dma_ops = { +static struct dma_map_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = x86_swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index deb5ebb32c3b..ed0c33761e6d 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -25,6 +25,8 @@ static int uv_bau_retry_limit __read_mostly; /* position of pnode (which is nasid>>1): */ static int uv_nshift __read_mostly; +/* base pnode in this partition */ +static int uv_partition_base_pnode __read_mostly; static unsigned long uv_mmask __read_mostly; @@ -32,6 +34,34 @@ static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); /* + * Determine the first node on a blade. + */ +static int __init blade_to_first_node(int blade) +{ + int node, b; + + for_each_online_node(node) { + b = uv_node_to_blade_id(node); + if (blade == b) + return node; + } + return -1; /* shouldn't happen */ +} + +/* + * Determine the apicid of the first cpu on a blade. + */ +static int __init blade_to_first_apicid(int blade) +{ + int cpu; + + for_each_present_cpu(cpu) + if (blade == uv_cpu_to_blade_id(cpu)) + return per_cpu(x86_cpu_to_apicid, cpu); + return -1; +} + +/* * Free a software acknowledge hardware resource by clearing its Pending * bit. This will return a reply to the sender. * If the message has timed out, a reply has already been sent by the @@ -67,7 +97,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; cpu = uv_blade_processor_id(); msg->number_of_cpus = - uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); this_cpu_mask = 1UL << cpu; if (msp->seen_by.bits & this_cpu_mask) return; @@ -215,14 +245,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc, * Returns @flush_mask if some remote flushing remains to be done. The * mask will have some bits still set. */ -const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, +const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode, struct bau_desc *bau_desc, struct cpumask *flush_mask) { int completion_status = 0; int right_shift; int tries = 0; - int blade; + int pnode; int bit; unsigned long mmr_offset; unsigned long index; @@ -265,8 +295,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, * use the IPI method of shootdown on them. */ for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - if (blade == this_blade) + pnode = uv_cpu_to_pnode(bit); + if (pnode == this_pnode) continue; cpumask_clear_cpu(bit, flush_mask); } @@ -309,16 +339,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask); int i; int bit; - int blade; + int pnode; int uv_cpu; - int this_blade; + int this_pnode; int locals = 0; struct bau_desc *bau_desc; cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); uv_cpu = uv_blade_processor_id(); - this_blade = uv_numa_blade_id(); + this_pnode = uv_hub_info->pnode; bau_desc = __get_cpu_var(bau_control).descriptor_base; bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; @@ -326,13 +356,14 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, i = 0; for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); - if (blade == this_blade) { + pnode = uv_cpu_to_pnode(bit); + BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1)); + if (pnode == this_pnode) { locals++; continue; } - bau_node_set(blade, &bau_desc->distribution); + bau_node_set(pnode - uv_partition_base_pnode, + &bau_desc->distribution); i++; } if (i == 0) { @@ -350,7 +381,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask); + return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask); } /* @@ -418,24 +449,58 @@ void uv_bau_message_interrupt(struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * uv_enable_timeouts + * + * Each target blade (i.e. blades that have cpu's) needs to have + * shootdown message timeouts enabled. The timeout does not cause + * an interrupt, but causes an error message to be returned to + * the sender. + */ static void uv_enable_timeouts(void) { - int i; int blade; - int last_blade; + int nblades; int pnode; - int cur_cpu = 0; - unsigned long apicid; + unsigned long mmr_image; - last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); - if (blade == last_blade) + nblades = uv_num_possible_blades(); + + for (blade = 0; blade < nblades; blade++) { + if (!uv_blade_nr_possible_cpus(blade)) continue; - last_blade = blade; - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); - cur_cpu += uv_blade_nr_possible_cpus(i); + mmr_image = + uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); + /* + * Set the timeout period and then lock it in, in three + * steps; captures and locks in the period. + * + * To program the period, the SOFT_ACK_MODE must be off. + */ + mmr_image &= ~((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Set the 4-bit period. + */ + mmr_image &= ~((unsigned long)0xf << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Subsequent reversals of the timebase bit (3) cause an + * immediate timeout of one or all INTD resources as + * indicated in bits 2:0 (7 causes all of them to timeout). + */ + mmr_image |= ((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } } @@ -482,8 +547,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) stat->requestee, stat->onetlb, stat->alltlb, stat->s_retry, stat->d_retry, stat->ptc_i); seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", - uv_read_global_mmr64(uv_blade_to_pnode - (uv_cpu_to_blade_id(cpu)), + uv_read_global_mmr64(uv_cpu_to_pnode(cpu), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), stat->sflush, stat->dflush, stat->retriesok, stat->nomsg, @@ -617,16 +681,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) * finish the initialization of the per-blade control structures */ static void __init -uv_table_bases_finish(int blade, int node, int cur_cpu, +uv_table_bases_finish(int blade, struct bau_control *bau_tablesp, struct bau_desc *adp) { struct bau_control *bcp; - int i; + int cpu; - for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { - bcp = (struct bau_control *)&per_cpu(bau_control, i); + for_each_present_cpu(cpu) { + if (blade != uv_cpu_to_blade_id(cpu)) + continue; + bcp = (struct bau_control *)&per_cpu(bau_control, cpu); bcp->bau_msg_head = bau_tablesp->va_queue_first; bcp->va_queue_first = bau_tablesp->va_queue_first; bcp->va_queue_last = bau_tablesp->va_queue_last; @@ -649,11 +715,10 @@ uv_activation_descriptor_init(int node, int pnode) struct bau_desc *adp; struct bau_desc *ad2; - adp = (struct bau_desc *) - kmalloc_node(16384, GFP_KERNEL, node); + adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); - pa = __pa((unsigned long)adp); + pa = uv_gpa(adp); /* need the real nasid*/ n = pa >> uv_nshift; m = pa & uv_mmask; @@ -667,8 +732,12 @@ uv_activation_descriptor_init(int node, int pnode) for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = - uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + /* + * base_dest_nodeid is the first node in the partition, so + * the bit map will indicate partition-relative node numbers. + * note that base_dest_nodeid is actually a nasid. + */ + ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* @@ -686,6 +755,8 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) { struct bau_payload_queue_entry *pqp; + unsigned long pa; + int pn; char *cp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( @@ -696,10 +767,14 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; + /* + * need the pnode of where the memory was really allocated + */ + pa = uv_gpa(pqp); + pn = pa >> uv_nshift; uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pnode << - UV_PAYLOADQ_PNODE_SHIFT) | + ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); @@ -715,8 +790,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) /* * Initialization of each UV blade's structures */ -static int __init uv_init_blade(int blade, int node, int cur_cpu) +static int __init uv_init_blade(int blade) { + int node; int pnode; unsigned long pa; unsigned long apicid; @@ -724,16 +800,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) struct bau_payload_queue_entry *pqp; struct bau_control *bau_tablesp; + node = blade_to_first_node(blade); bau_tablesp = uv_table_bases_init(blade, node); pnode = uv_blade_to_pnode(blade); adp = uv_activation_descriptor_init(node, pnode); pqp = uv_payload_queue_init(node, pnode, bau_tablesp); - uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + uv_table_bases_finish(blade, bau_tablesp, adp); /* * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + apicid = blade_to_first_apicid(blade); pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); if ((pa & 0xff) != UV_BAU_MESSAGE) { uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -748,9 +825,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) static int __init uv_bau_init(void) { int blade; - int node; int nblades; - int last_blade; int cur_cpu; if (!is_uv_system()) @@ -763,29 +838,21 @@ static int __init uv_bau_init(void) uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; uv_mmask = (1UL << uv_hub_info->n_val) - 1; - nblades = 0; - last_blade = -1; - cur_cpu = 0; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - nblades++; - } + nblades = uv_num_possible_blades(); + uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); - last_blade = -1; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - uv_init_blade(blade, node, cur_cpu); - cur_cpu += uv_blade_nr_possible_cpus(blade); - } + uv_partition_base_pnode = 0x7fffffff; + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade) && + (uv_blade_to_pnode(blade) < uv_partition_base_pnode)) + uv_partition_base_pnode = uv_blade_to_pnode(blade); + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade)) + uv_init_blade(blade); + alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c index 67f9b9dbf800..36afb98675a4 100644 --- a/arch/x86/kernel/uv_sysfs.c +++ b/arch/x86/kernel/uv_sysfs.c @@ -21,6 +21,7 @@ #include <linux/sysdev.h> #include <asm/uv/bios.h> +#include <asm/uv/uv.h> struct kobject *sgi_uv_kobj; @@ -47,6 +48,9 @@ static int __init sgi_uv_sysfs_init(void) { unsigned long ret; + if (!is_uv_system()) + return -ENODEV; + if (!sgi_uv_kobj) sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj); if (!sgi_uv_kobj) { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 09daebfdb11c..8a450930834f 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -280,15 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return NULL; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { + + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { free_memtype(phys_addr, phys_addr + size); free_vm_area(area); return NULL; } - if (ioremap_change_attr(vaddr, size, prot_val) < 0) { + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { free_memtype(phys_addr, phys_addr + size); - vunmap(area->addr); + free_vm_area(area); return NULL; } @@ -374,7 +375,8 @@ static void __iomem *ioremap_default(resource_size_t phys_addr, * - UC_MINUS for non-WB-able memory with no other conflicting mappings * - Inherit from confliting mappings otherwise */ - err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags); + err = reserve_memtype(phys_addr, phys_addr + size, + _PAGE_CACHE_WB, &flags); if (err < 0) return NULL; diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index d71e1b636ce6..797f9f107cb6 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -945,71 +945,94 @@ int _set_memory_uc(unsigned long addr, int numpages) int set_memory_uc(unsigned long addr, int numpages) { + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_UC_MINUS, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_err; + + ret = _set_memory_uc(addr, numpages); + if (ret) + goto out_free; - return _set_memory_uc(addr, numpages); + return 0; + +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_uc); int set_memory_array_uc(unsigned long *addr, int addrinarray) { - unsigned long start; - unsigned long end; - int i; + int i, j; + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ for (i = 0; i < addrinarray; i++) { - start = __pa(addr[i]); - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL)) - goto out; + ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_free; } - return change_page_attr_set(addr, addrinarray, + ret = change_page_attr_set(addr, addrinarray, __pgprot(_PAGE_CACHE_UC_MINUS), 1); -out: - for (i = 0; i < addrinarray; i++) { - unsigned long tmp = __pa(addr[i]); - - if (tmp == start) - break; - for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(tmp, end); - } - return -EINVAL; + if (ret) + goto out_free; + + return 0; + +out_free: + for (j = 0; j < i; j++) + free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE); + + return ret; } EXPORT_SYMBOL(set_memory_array_uc); int _set_memory_wc(unsigned long addr, int numpages) { - return change_page_attr_set(&addr, numpages, + int ret; + ret = change_page_attr_set(&addr, numpages, + __pgprot(_PAGE_CACHE_UC_MINUS), 0); + + if (!ret) { + ret = change_page_attr_set(&addr, numpages, __pgprot(_PAGE_CACHE_WC), 0); + } + return ret; } int set_memory_wc(unsigned long addr, int numpages) { + int ret; + if (!pat_enabled) return set_memory_uc(addr, numpages); - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_WC, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_WC, NULL); + if (ret) + goto out_err; + + ret = _set_memory_wc(addr, numpages); + if (ret) + goto out_free; + + return 0; - return _set_memory_wc(addr, numpages); +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_wc); @@ -1021,29 +1044,31 @@ int _set_memory_wb(unsigned long addr, int numpages) int set_memory_wb(unsigned long addr, int numpages) { - free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); + int ret; + + ret = _set_memory_wb(addr, numpages); + if (ret) + return ret; - return _set_memory_wb(addr, numpages); + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); + return 0; } EXPORT_SYMBOL(set_memory_wb); int set_memory_array_wb(unsigned long *addr, int addrinarray) { int i; + int ret; - for (i = 0; i < addrinarray; i++) { - unsigned long start = __pa(addr[i]); - unsigned long end; - - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(start, end); - } - return change_page_attr_clear(addr, addrinarray, + ret = change_page_attr_clear(addr, addrinarray, __pgprot(_PAGE_CACHE_MASK), 1); + if (ret) + return ret; + + for (i = 0; i < addrinarray; i++) + free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE); + + return 0; } EXPORT_SYMBOL(set_memory_array_wb); @@ -1136,6 +1161,8 @@ int set_pages_array_wb(struct page **pages, int addrinarray) retval = cpa_clear_pages_array(pages, addrinarray, __pgprot(_PAGE_CACHE_MASK)); + if (retval) + return retval; for (i = 0; i < addrinarray; i++) { start = (unsigned long)page_address(pages[i]); @@ -1143,7 +1170,7 @@ int set_pages_array_wb(struct page **pages, int addrinarray) free_memtype(start, end); } - return retval; + return 0; } EXPORT_SYMBOL(set_pages_array_wb); diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index c009a241d562..e6718bb28065 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -182,10 +182,10 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) u8 mtrr_type; mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == MTRR_TYPE_UNCACHABLE) - return _PAGE_CACHE_UC; - if (mtrr_type == MTRR_TYPE_WRCOMB) - return _PAGE_CACHE_WC; + if (mtrr_type != MTRR_TYPE_WRBACK) + return _PAGE_CACHE_UC_MINUS; + + return _PAGE_CACHE_WB; } return req_type; @@ -352,23 +352,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, return 0; } - if (req_type == -1) { - /* - * Call mtrr_lookup to get the type hint. This is an - * optimization for /dev/mem mmap'ers into WB memory (BIOS - * tools and ACPI tools). Use WB request for WB memory and use - * UC_MINUS otherwise. - */ - u8 mtrr_type = mtrr_type_lookup(start, end); - - if (mtrr_type == MTRR_TYPE_WRBACK) - actual_type = _PAGE_CACHE_WB; - else - actual_type = _PAGE_CACHE_UC_MINUS; - } else { - actual_type = pat_x_mtrr_type(start, end, - req_type & _PAGE_CACHE_MASK); - } + /* + * Call mtrr_lookup to get the type hint. This is an + * optimization for /dev/mem mmap'ers into WB memory (BIOS + * tools and ACPI tools). Use WB request for WB memory and use + * UC_MINUS otherwise. + */ + actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK); if (new_type) *new_type = actual_type; @@ -546,9 +536,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size) int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, unsigned long size, pgprot_t *vma_prot) { - u64 offset = ((u64) pfn) << PAGE_SHIFT; - unsigned long flags = -1; - int retval; + unsigned long flags = _PAGE_CACHE_WB; if (!range_is_allowed(pfn, size)) return 0; @@ -576,64 +564,11 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, } #endif - /* - * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot. - * - * Without O_SYNC, we want to get - * - WB for WB-able memory and no other conflicting mappings - * - UC_MINUS for non-WB-able memory with no other conflicting mappings - * - Inherit from confliting mappings otherwise - */ - if (flags != -1) { - retval = reserve_memtype(offset, offset + size, flags, NULL); - } else { - retval = reserve_memtype(offset, offset + size, -1, &flags); - } - - if (retval < 0) - return 0; - - if (((pfn < max_low_pfn_mapped) || - (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) && - ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { - free_memtype(offset, offset + size); - printk(KERN_INFO - "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", - current->comm, current->pid, - cattr_name(flags), - offset, (unsigned long long)(offset + size)); - return 0; - } - *vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) | flags); return 1; } -void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK); - u64 addr = (u64)pfn << PAGE_SHIFT; - unsigned long flags; - - reserve_memtype(addr, addr + size, want_flags, &flags); - if (flags != want_flags) { - printk(KERN_INFO - "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n", - current->comm, current->pid, - cattr_name(want_flags), - addr, (unsigned long long)(addr + size), - cattr_name(flags)); - } -} - -void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - u64 addr = (u64)pfn << PAGE_SHIFT; - - free_memtype(addr, addr + size); -} - /* * Change the memory type for the physial address range in kernel identity * mapping space if that range is a part of identity map. @@ -671,8 +606,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, { int is_ram = 0; int ret; - unsigned long flags; unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK); + unsigned long flags = want_flags; is_ram = pat_pagerange_is_ram(paddr, paddr + size); @@ -734,29 +669,28 @@ static void free_pfn_range(u64 paddr, unsigned long size) * * If the vma has a linear pfn mapping for the entire range, we get the prot * from pte and reserve the entire vma range with single reserve_pfn_range call. - * Otherwise, we reserve the entire vma range, my ging through the PTEs page - * by page to get physical address and protection. */ int track_pfn_vma_copy(struct vm_area_struct *vma) { - int retval = 0; - unsigned long i, j; resource_size_t paddr; unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; pgprot_t pgprot; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* * reserve the whole chunk covered by vma. We need the * starting address and protection from pte. */ - if (follow_phys(vma, vma_start, 0, &prot, &paddr)) { + if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) { WARN_ON_ONCE(1); return -EINVAL; } @@ -764,28 +698,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma) return reserve_pfn_range(paddr, vma_size, &pgprot, 1); } - /* reserve entire vma page by page, using pfn and prot from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - pgprot = __pgprot(prot); - retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - if (follow_phys(vma, vma_start + j, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -795,50 +708,28 @@ cleanup_ret: * prot is passed in as a parameter for the new mapping. If the vma has a * linear pfn mapping for the entire range reserve the entire vma range with * single reserve_pfn_range call. - * Otherwise, we look t the pfn and size and reserve only the specified range - * page by page. - * - * Note that this function can be called with caller trying to map only a - * subrange/page inside the vma. */ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size) { - int retval = 0; - unsigned long i, j; - resource_size_t base_paddr; resource_size_t paddr; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; return reserve_pfn_range(paddr, vma_size, prot, 0); } - /* reserve page by page using pfn and size */ - base_paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = base_paddr + i; - retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - paddr = base_paddr + j; - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -849,39 +740,23 @@ cleanup_ret: void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn, unsigned long size) { - unsigned long i; resource_size_t paddr; - unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* free the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; free_pfn_range(paddr, vma_size); return; } - - if (size != 0 && size != vma_size) { - /* free page by page, using pfn and size */ - paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = paddr + i; - free_pfn_range(paddr, PAGE_SIZE); - } - } else { - /* free entire vma, page by page, using the pfn from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - } } pgprot_t pgprot_writecombine(pgprot_t prot) |