1228 files changed, 53268 insertions, 19531 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 8f138e580d1a..2d0e7099eb3f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -468,6 +468,9 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -651,6 +654,13 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
 config LTO
 	bool
 	help
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6aa7dc4db2fc..d08a3c450ce7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4709-tplink-archer-c9-v1.dtb \
 	bcm47094-asus-rt-ac88u.dtb \
 	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
 	bcm47094-linksys-panamera.dtb \
 	bcm47094-luxul-abr-4500.dtb \
 	bcm47094-luxul-xap-1610.dtb \
@@ -139,6 +140,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
 	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -355,6 +357,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
 	kirkwood-nsa320.dtb \
 	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
@@ -681,6 +684,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
 	imx6sl-tolino-shine2hd.dtb \
 	imx6sl-tolino-shine3.dtb \
 	imx6sl-tolino-vision5.dtb \
@@ -1029,7 +1033,9 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8016-sbc.dtb \
 	qcom-apq8026-asus-sparrow.dtb \
+	qcom-apq8026-huawei-sturgeon.dtb \
 	qcom-apq8026-lg-lenok.dtb \
+	qcom-apq8026-samsung-matisse-wifi.dtb \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
@@ -1059,6 +1065,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-rhine-amami.dtb \
 	qcom-msm8974-sony-xperia-rhine-honami.dtb \
 	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-oneplus-bacon.dtb \
 	qcom-msm8974pro-samsung-klte.dtb \
 	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
@@ -1214,6 +1221,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp151a-prtt1a.dtb \
 	stm32mp151a-prtt1c.dtb \
 	stm32mp151a-prtt1s.dtb \
+	stm32mp151a-dhcor-testbench.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
 	stm32mp153c-dhcor-drc-compact.dtb \
 	stm32mp157a-avenger96.dtb \
@@ -1454,6 +1462,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-pro4-ace.dtb \
 	uniphier-pro4-ref.dtb \
 	uniphier-pro4-sanji.dtb \
+	uniphier-pro5-epcore.dtb \
+	uniphier-pro5-proex.dtb \
 	uniphier-pxs2-gentil.dtb \
 	uniphier-pxs2-vodka.dtb \
 	uniphier-sld8-ref.dtb
@@ -1588,6 +1598,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-romed8hm3.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
 	aspeed-bmc-facebook-cloudripper.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
@@ -1601,6 +1612,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
 	aspeed-bmc-ibm-rainier-1s4u.dtb \
@@ -1612,7 +1624,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mihawk.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
 	aspeed-bmc-opp-nicole.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
index 9a79f727baf6..025014657d12 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -17,18 +17,18 @@
 
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "onrisc:red:power";
 			linux,default-trigger = "default-on";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		wlan {
+		led-wlan {
 			label = "onrisc:blue:wlan";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		app {
+		led-app {
 			label = "onrisc:green:app";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
index 7cfddada9348..486f24deb875 100644
--- a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
@@ -85,8 +85,13 @@
 		audio-ports = <	TDA998x_I2S	0x03>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 25c6ac9913d2..5beabaa5ff6a 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -126,7 +126,7 @@
 		backlight = <&backlight>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -544,7 +544,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 9c458e5a95b7..5b3278c0c46a 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -191,7 +191,7 @@
 		backlight = <&lcd_bl>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index f6356266564c..b357364e93f9 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -103,8 +103,9 @@
 
 	};
 
-	guardian_beeper: dmtimer-pwm@7 {
+	guardian_beeper: pwm-7 {
 		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&guardian_beeper_pins>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index cc14415a4eb9..3fddf80dcf71 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -168,7 +168,7 @@
 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 
 		partition@1 {
@@ -188,7 +188,7 @@
 
 		partition@4 {
 			label = "File System";
-			reg = <0x00780000 0x007880000>;
+			reg = <0x00780000 0x07880000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 7b40ca9483ca..49e280b42442 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -16,11 +16,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index e0364adb8393..7d00e8b20f18 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -21,11 +21,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
index 9d81d4cc6890..425ad9b81a68 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -161,8 +161,13 @@
 		#sound-dai-cells = <0>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index dae448040a97..947497413977 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,22 +12,20 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 8691eec33b61..a4509e9e1056 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -555,11 +555,11 @@
 };
 
 &usb0 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &usb1 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index 5e415d8ffdd8..0ba4883cd4ef 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -23,28 +23,28 @@
 
 		compatible = "gpio-leds";
 
-		usr0 {
+		led-usr0 {
 			label = "beaglebone:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		usr1 {
+		led-usr1 {
 			label = "beaglebone:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		usr2 {
+		led-usr2 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		usr3 {
+		led-usr3 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 35b653014f2b..11618aa501fc 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -26,12 +26,12 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc_fixed: vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
@@ -150,7 +150,7 @@
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 	};
 
-	pwm11: dmtimer-pwm@11 {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -176,7 +176,7 @@
 };
 
 &davinci_mdio {
-	     status = "okay";
+	status = "okay";
 };
 
 &dss {
@@ -227,7 +227,7 @@
 };
 
 &mmc3 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &usbhshost {
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index cb316135bc7c..823f63502e9f 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -49,13 +49,35 @@
 	};
 
 	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
+		target-module@5c040000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5c040400 0x4>,
+			      <0x5c040404 0x4>,
+			      <0x5c040408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&hsotgusb_ick_am35xx>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c040000 0x1000>;
+
+			am35x_otg_hs: am35x_otg_hs@0 {
+				compatible = "ti,omap3-musb";
+				status = "disabled";
+				reg = <0 0x1000>;
+				interrupts = <71>;
+				interrupt-names = "mc";
+			};
 		};
 
 		davinci_emac: ethernet@5c000000 {
@@ -154,7 +176,7 @@
 };
 
 /* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
+&usb_otg_target {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 123a95f87554..e46cf2a9d075 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -452,7 +452,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 036f3831dc26..511a02e13e2c 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -763,7 +763,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 27f4ce855549..9fc915a2582e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -919,7 +919,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c06eda817242..7f092a8811e8 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -542,7 +542,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000040000>;
+			reg = <0x00000000 0x00040000>;
 		};
 		partition@1 {
 			label = "QSPI.u-boot";
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index 2008c6eaaa52..561195b749eb 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -86,19 +86,19 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index b0b640b7de40..079b37cf148a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -85,11 +85,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 85e2e9e27a9f..d752ac1d7b58 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -94,11 +94,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 6ba7699b69ed..be005c9f42ef 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -61,8 +61,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -155,18 +155,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+				reg = <3>;
+				label = "lan3";
 			};
 
 			port@5 {
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index 3cf70c72c5ca..9cb69999b1db 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -72,11 +72,11 @@
 	};
 
 	gpio-leds {
-		red-sata2 {
+		led-red-sata2 {
 			label = "dart:red:sata2";
 			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
 		};
-		red-sata3 {
+		led-red-sata3 {
 			label = "dart:red:sata3";
 			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index 866b8630d407..822f10734946 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -132,21 +132,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		white-power {
+		led-white-power {
 			label = "dart:white:power";
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 
 		};
-		red-power {
+		led-red-power {
 			label = "dart:red:power";
 			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		};
-		red-sata0 {
+		led-red-sata0 {
 			label = "dart:red:sata0";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		red-sata1 {
+		led-red-sata1 {
 			label = "dart:red:sata1";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 702a85af2078..124a8ba279e3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -107,7 +107,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-sata0 {
+		led-red-sata0 {
 			label = "cumulus:red:sata0";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index e72b8ed4b997..f0893cc06607 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -91,9 +91,9 @@
 			};
 
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 9dc928859ad3..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -84,7 +84,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 929deaf312a5..c310ef26d1cc 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -592,7 +592,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index ce1dddb2269b..e94f22b0e9b5 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -89,7 +89,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -118,7 +118,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
index a03050c97084..88b2921fed55 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "caiman:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "caiman:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
index e3e4877a6f49..88200f930d0d 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "cobra:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "cobra:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
index 3c4af57ec2b9..4ab45f294de2 100644
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -54,22 +54,22 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 		label = "rango:white:power";
 	};
 
-	sata {
+	led-sata {
 		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		label = "rango:white:sata";
 	};
 
-	wlan_2g {
+	led-wlan_2g {
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_2g";
 	};
 
-	wlan_5g {
+	led-wlan_5g {
 		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_5g";
 	};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
index 3451cd3e5dff..f1b1f22413f1 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "shelby:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "shelby:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 116aca5e688f..85e8d966f6c1 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -71,12 +71,12 @@
 		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
+		led-sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "disk-activity";
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index 2622af73c9da..ea91ff964d94 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -149,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 72ac807cae25..0c1f238e4c30 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -483,7 +489,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 83392b92dae2..be8d607c59b2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 446861b6b17b..12933eff419f 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -304,7 +304,7 @@
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
+				compatible = "marvell,armadaxp-gpio",
 					     "marvell,orion-gpio";
 				reg = <0x18100 0x40>, <0x181c0 0x08>;
 				reg-names = "gpio", "pwm";
@@ -323,7 +323,7 @@
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
+				compatible = "marvell,armadaxp-gpio",
 					     "marvell,orion-gpio";
 				reg = <0x18140 0x40>, <0x181c8 0x08>;
 				reg-names = "gpio", "pwm";
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 923b035a3ab3..1e05208d9f34 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -213,7 +213,7 @@
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
 				reg = <0x18100 0x40>;
 				ngpios = <32>;
 				gpio-controller;
@@ -227,7 +227,7 @@
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
 				reg = <0x18140 0x40>;
 				ngpios = <28>;
 				gpio-controller;
@@ -463,7 +463,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -492,7 +492,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -524,7 +524,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index b21ffb819b1d..7a7e2066c498 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -296,6 +296,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 622ac40dd164..dbe8dfe236fb 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -195,7 +195,7 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index bf9360f41e0a..5ea9d509cd30 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -107,7 +107,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -163,7 +163,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -191,7 +191,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 0714af52e607..6c6fbb9faf5a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -122,7 +122,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -150,7 +150,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -178,7 +178,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -234,7 +234,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -262,7 +262,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -290,7 +290,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -318,7 +318,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 8ea73587db81..31933f81144e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -121,11 +121,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 6c19984d668e..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -260,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index d127cbcc7998..0a51d2e32fab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -342,6 +342,10 @@
 
 &i2c0 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c1 {
@@ -350,6 +354,14 @@
 
 &i2c2 {
 	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
 };
 
 &i2c3 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 606cd4be245a..4b91600eaf62 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -445,6 +445,10 @@
 
 &i2c11 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c14 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..6600f7e9bf5e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "lm25066";						\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout0 {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index 1fc3e7cbf0d1..a619eec70633 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -60,7 +60,7 @@
 		compatible = "gpio-leds";
 		sys_log_id {
 			default-state = "off";
-			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -191,6 +191,95 @@
 			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &mac2 {
@@ -302,17 +391,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -388,17 +477,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -474,17 +563,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -560,17 +649,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -646,17 +735,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -732,17 +821,17 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "dual";
-			try-power-role = "sink";
-			data-role = "dual";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
-			op-sink-microwatt = <10000000>;
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
 		};
 	};
 
@@ -863,6 +952,9 @@
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
@@ -892,11 +984,11 @@
 	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
 			"ALERT_SLED3_N","ALERT_SLED4_N",
 			"ALERT_SLED5_N","ALERT_SLED6_N",
-			"","",
+			"","USB_DEBUG_PWR_BTN_N",
 	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
 			"LED_POSTCODE_2","LED_POSTCODE_3",
 			"LED_POSTCODE_4","LED_POSTCODE_5",
-			"LED_POSTCODE_5","LED_POSTCODE_7",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
 	/*O0-O7*/	"","","","",
 			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
 	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
@@ -953,3 +1045,22 @@
 &ehci0 {
 	status = "okay";
 };
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
index 9c6271a17ae8..5cd060029ea9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
@@ -77,7 +77,7 @@
 		i2c55 = &imux55;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <2>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
 			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
index 8e1a1d1b282d..b5cd4c7800b0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -44,7 +44,7 @@
 		stdout-path = &uart5;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
index af58a73bbc49..6b319f34a9b9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
@@ -207,7 +207,7 @@
 		i2c143 = &imux143;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <3>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
 			   <0>,	/* device reg=<1> does not exist */
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
index a901c8be49b9..ed305948386f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -67,7 +67,7 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..d1971ddf06a5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "ibm,cffps";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "ibm,cffps";
+		reg = <0x59>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index a6a2bc3b855c..1448ea895be4 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -162,16 +162,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -179,6 +172,12 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
@@ -2551,6 +2550,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2695,6 +2699,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2839,6 +2848,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -2983,6 +2997,11 @@
 
 			fsi_occ3: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3127,6 +3146,11 @@
 
 			fsi_occ4: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3271,6 +3295,11 @@
 
 			fsi_occ5: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3415,6 +3444,11 @@
 
 			fsi_occ6: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -3559,6 +3593,11 @@
 
 			fsi_occ7: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index bf59a9962379..20ef958698ec 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -95,14 +95,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -110,6 +105,13 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
@@ -442,6 +444,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -586,6 +593,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -730,6 +742,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -874,6 +891,11 @@
 
 			fsi_occ3: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -995,32 +1017,6 @@
 		reg = <0x4a>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard0-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard0-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -1038,6 +1034,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c4mux0chn1: i2c@1 {
@@ -1077,58 +1099,6 @@
 		reg = <0x49>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard3-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard3-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9551@61 {
-		compatible = "nxp,pca9551";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard4-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard4-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -1146,6 +1116,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c5mux0chn1: i2c@1 {
@@ -1157,6 +1153,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x51>;
 			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 	};
 };
@@ -2009,32 +2031,6 @@
 		reg = <0x49>;
 	};
 
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard10-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard10-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
 	pca9546@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -2052,6 +2048,32 @@
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
 		};
 
 		i2c11mux0chn1: i2c@1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index 48776fb663fb..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,1381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c215 = &bus6_mux215;
-		i2c216 = &bus6_mux216;
-		i2c217 = &bus6_mux217;
-		i2c218 = &bus6_mux218;
-		i2c219 = &bus6_mux219;
-		i2c220 = &bus6_mux220;
-		i2c221 = &bus6_mux221;
-		i2c222 = &bus6_mux222;
-		i2c223 = &bus7_mux223;
-		i2c224 = &bus7_mux224;
-		i2c225 = &bus7_mux225;
-		i2c226 = &bus7_mux226;
-		i2c227 = &bus7_mux227;
-		i2c228 = &bus7_mux228;
-		i2c229 = &bus7_mux229;
-		i2c230 = &bus7_mux230;
-		i2c231 = &bus9_mux231;
-		i2c232 = &bus9_mux232;
-		i2c233 = &bus9_mux233;
-		i2c234 = &bus9_mux234;
-		i2c235 = &bus9_mux235;
-		i2c236 = &bus9_mux236;
-		i2c237 = &bus9_mux237;
-		i2c238 = &bus9_mux238;
-		i2c239 = &bus10_mux239;
-		i2c240 = &bus10_mux240;
-		i2c241 = &bus10_mux241;
-		i2c242 = &bus10_mux242;
-		i2c243 = &bus10_mux243;
-		i2c244 = &bus10_mux244;
-		i2c245 = &bus10_mux245;
-		i2c246 = &bus10_mux246;
-		i2c247 = &bus12_mux247;
-		i2c248 = &bus12_mux248;
-		i2c249 = &bus12_mux249;
-		i2c250 = &bus12_mux250;
-		i2c251 = &bus13_mux251;
-		i2c252 = &bus13_mux252;
-		i2c253 = &bus13_mux253;
-		i2c254 = &bus13_mux254;
-		i2c255 = &bus13_mux255;
-		i2c256 = &bus13_mux256;
-		i2c257 = &bus13_mux257;
-		i2c258 = &bus13_mux258;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-
-		button-id {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","","","",
-	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
-	/*F0-F7*/	"","id-button","","","","","air-water","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","fsi-trans","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
-	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus7_mux223: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus7_mux224: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus7_mux225: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus7_mux226: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus7_mux227: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus7_mux228: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus7_mux229: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus7_mux230: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus6_mux215: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus6_mux216: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus6_mux217: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus6_mux218: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus6_mux219: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus6_mux220: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus6_mux221: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus6_mux222: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux231: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus0-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus0";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux232: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus1-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus1";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux233: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux234: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux235: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus2-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus2";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux236: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus3-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus3";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux237: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux238: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux239: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus4-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus4";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux240: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus5-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus5";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux241: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux242: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux243: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus6-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus6";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux244: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus7-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus7";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux245: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux246: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus12_mux247: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux248: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux249: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux250: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		bus13_mux251: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus13_mux252: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus13_mux253: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus13_mux254: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus13_mux255: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus13_mux256: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus13_mux257: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus13_mux258: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index ebbcfe445d9c..cc2f8b785917 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -36,6 +36,10 @@
 		serial4 = &uart5;
 		serial5 = &vuart1;
 		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
 	};
 
 
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
index 051de5bec345..31590d3186a2 100644
--- a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -25,7 +25,7 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 4ba52ba11dc6..d929c1ba5789 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -76,7 +76,6 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd_1v15: fixed-regulator-vdd_1v15 {
@@ -85,7 +84,6 @@
 		regulator-min-microvolt = <1150000>;
 		regulator-max-microvolt = <1150000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd1_3v3: fixed-regulator-vdd1_3v3 {
@@ -94,7 +92,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-		status = "okay";
 	};
 
 	vdd2_3v3: regulator-fixed-vdd2_3v3 {
@@ -103,7 +100,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 3b25c67795dd..aa5cc0e98bba 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -764,8 +764,9 @@
 &sdmmc0 {
 	bus-width = <8>;
 	non-removable;
-	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
@@ -775,6 +776,8 @@
 	bus-width = <4>;
 	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 7a113325abb9..6f9004ebf424 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -666,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 60d61291f344..024af2db638e 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
index a020c12b2884..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -67,6 +67,12 @@
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
index b93387b0c1c3..ebaf1c3ce8db 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -62,16 +62,6 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 4432412044de..d5f8823230db 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2711.dtsi"
 #include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -14,20 +15,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -41,7 +29,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
@@ -156,6 +144,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pixelvalve0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
index c53d9eb0b802..1ab8184302db 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -11,14 +11,6 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		/delete-node/ led-act;
-
-		led-pwr {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
@@ -40,6 +32,14 @@
 	clock-frequency = <1950000>;
 };
 
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	/delete-node/ led_act;
+};
+
 &pm {
 	/delete-property/ system-power-controller;
 };
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
index 19600b629be5..d7ba02f586d3 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
@@ -1,23 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	model = "Raspberry Pi Compute Module 4 IO Board";
-
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &ddc0 {
@@ -113,6 +101,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pixelvalve0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
index a2954d466a73..48e63ab7848c 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
@@ -12,7 +12,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -26,7 +26,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 941c4d16791b..097e9f252235 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -48,7 +48,7 @@
 		 * This node is the provider for the enable-method for
 		 * bringing up secondary cores.
 		 */
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 		};
@@ -536,6 +536,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
@@ -647,21 +648,21 @@
 
 	gpio-ranges = <&gpio 0 0 58>;
 
-	gpclk0_gpio49: gpclk0_gpio49 {
+	gpclk0_gpio49: gpclk0-gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk1_gpio50: gpclk1_gpio50 {
+	gpclk1_gpio50: gpclk1-gpio50 {
 		pin-gpclk {
 			pins = "gpio50";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk2_gpio51: gpclk2_gpio51 {
+	gpclk2_gpio51: gpclk2-gpio51 {
 		pin-gpclk {
 			pins = "gpio51";
 			function = "alt1";
@@ -669,7 +670,7 @@
 		};
 	};
 
-	i2c0_gpio46: i2c0_gpio46 {
+	i2c0_gpio46: i2c0-gpio46 {
 		pin-sda {
 			function = "alt0";
 			pins = "gpio46";
@@ -681,7 +682,7 @@
 			bias-disable;
 		};
 	};
-	i2c1_gpio46: i2c1_gpio46 {
+	i2c1_gpio46: i2c1-gpio46 {
 		pin-sda {
 			function = "alt1";
 			pins = "gpio46";
@@ -693,7 +694,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio2: i2c3_gpio2 {
+	i2c3_gpio2: i2c3-gpio2 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio2";
@@ -705,7 +706,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio4: i2c3_gpio4 {
+	i2c3_gpio4: i2c3-gpio4 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio4";
@@ -717,7 +718,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio6: i2c4_gpio6 {
+	i2c4_gpio6: i2c4-gpio6 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio6";
@@ -729,7 +730,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio8: i2c4_gpio8 {
+	i2c4_gpio8: i2c4-gpio8 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio8";
@@ -741,7 +742,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio10: i2c5_gpio10 {
+	i2c5_gpio10: i2c5-gpio10 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio10";
@@ -753,7 +754,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio12: i2c5_gpio12 {
+	i2c5_gpio12: i2c5-gpio12 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio12";
@@ -765,7 +766,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio0: i2c6_gpio0 {
+	i2c6_gpio0: i2c6-gpio0 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio0";
@@ -777,7 +778,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio22: i2c6_gpio22 {
+	i2c6_gpio22: i2c6-gpio22 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio22";
@@ -789,7 +790,7 @@
 			bias-disable;
 		};
 	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
+	i2c_slave_gpio8: i2c-slave-gpio8 {
 		pins-i2c-slave {
 			pins = "gpio8",
 			       "gpio9",
@@ -799,7 +800,7 @@
 		};
 	};
 
-	jtag_gpio48: jtag_gpio48 {
+	jtag_gpio48: jtag-gpio48 {
 		pins-jtag {
 			pins = "gpio48",
 			       "gpio49",
@@ -811,7 +812,7 @@
 		};
 	};
 
-	mii_gpio28: mii_gpio28 {
+	mii_gpio28: mii-gpio28 {
 		pins-mii {
 			pins = "gpio28",
 			       "gpio29",
@@ -820,7 +821,7 @@
 			function = "alt4";
 		};
 	};
-	mii_gpio36: mii_gpio36 {
+	mii_gpio36: mii-gpio36 {
 		pins-mii {
 			pins = "gpio36",
 			       "gpio37",
@@ -830,7 +831,7 @@
 		};
 	};
 
-	pcm_gpio50: pcm_gpio50 {
+	pcm_gpio50: pcm-gpio50 {
 		pins-pcm {
 			pins = "gpio50",
 			       "gpio51",
@@ -840,63 +841,63 @@
 		};
 	};
 
-	pwm0_0_gpio12: pwm0_0_gpio12 {
+	pwm0_0_gpio12: pwm0-0-gpio12 {
 		pin-pwm {
 			pins = "gpio12";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
+	pwm0_0_gpio18: pwm0-0-gpio18 {
 		pin-pwm {
 			pins = "gpio18";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
+	pwm1_0_gpio40: pwm1-0-gpio40 {
 		pin-pwm {
 			pins = "gpio40";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
+	pwm0_1_gpio13: pwm0-1-gpio13 {
 		pin-pwm {
 			pins = "gpio13";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
+	pwm0_1_gpio19: pwm0-1-gpio19 {
 		pin-pwm {
 			pins = "gpio19";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
+	pwm1_1_gpio41: pwm1-1-gpio41 {
 		pin-pwm {
 			pins = "gpio41";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
+	pwm0_1_gpio45: pwm0-1-gpio45 {
 		pin-pwm {
 			pins = "gpio45";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
+	pwm0_0_gpio52: pwm0-0-gpio52 {
 		pin-pwm {
 			pins = "gpio52";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
+	pwm0_1_gpio53: pwm0-1-gpio53 {
 		pin-pwm {
 			pins = "gpio53";
 			function = "alt1";
@@ -904,7 +905,7 @@
 		};
 	};
 
-	rgmii_gpio35: rgmii_gpio35 {
+	rgmii_gpio35: rgmii-gpio35 {
 		pin-start-stop {
 			pins = "gpio35";
 			function = "alt4";
@@ -914,26 +915,26 @@
 			function = "alt4";
 		};
 	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
 		pin-irq {
 			pins = "gpio34";
 			function = "alt5";
 		};
 	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
 		pin-irq {
 			pins = "gpio39";
 			function = "alt4";
 		};
 	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
 		pins-mdio {
 			pins = "gpio28",
 			       "gpio29";
 			function = "alt5";
 		};
 	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
 		pins-mdio {
 			pins = "gpio37",
 			       "gpio38";
@@ -941,7 +942,7 @@
 		};
 	};
 
-	spi0_gpio46: spi0_gpio46 {
+	spi0_gpio46: spi0-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -950,7 +951,7 @@
 			function = "alt2";
 		};
 	};
-	spi2_gpio46: spi2_gpio46 {
+	spi2_gpio46: spi2-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -960,7 +961,7 @@
 			function = "alt5";
 		};
 	};
-	spi3_gpio0: spi3_gpio0 {
+	spi3_gpio0: spi3-gpio0 {
 		pins-spi {
 			pins = "gpio0",
 			       "gpio1",
@@ -969,7 +970,7 @@
 			function = "alt3";
 		};
 	};
-	spi4_gpio4: spi4_gpio4 {
+	spi4_gpio4: spi4-gpio4 {
 		pins-spi {
 			pins = "gpio4",
 			       "gpio5",
@@ -978,7 +979,7 @@
 			function = "alt3";
 		};
 	};
-	spi5_gpio12: spi5_gpio12 {
+	spi5_gpio12: spi5-gpio12 {
 		pins-spi {
 			pins = "gpio12",
 			       "gpio13",
@@ -987,7 +988,7 @@
 			function = "alt3";
 		};
 	};
-	spi6_gpio18: spi6_gpio18 {
+	spi6_gpio18: spi6-gpio18 {
 		pins-spi {
 			pins = "gpio18",
 			       "gpio19",
@@ -997,7 +998,7 @@
 		};
 	};
 
-	uart2_gpio0: uart2_gpio0 {
+	uart2_gpio0: uart2-gpio0 {
 		pin-tx {
 			pins = "gpio0";
 			function = "alt4";
@@ -1009,7 +1010,7 @@
 			bias-pull-up;
 		};
 	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
 		pin-cts {
 			pins = "gpio2";
 			function = "alt4";
@@ -1021,7 +1022,7 @@
 			bias-disable;
 		};
 	};
-	uart3_gpio4: uart3_gpio4 {
+	uart3_gpio4: uart3-gpio4 {
 		pin-tx {
 			pins = "gpio4";
 			function = "alt4";
@@ -1033,7 +1034,7 @@
 			bias-pull-up;
 		};
 	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
 		pin-cts {
 			pins = "gpio6";
 			function = "alt4";
@@ -1045,7 +1046,7 @@
 			bias-disable;
 		};
 	};
-	uart4_gpio8: uart4_gpio8 {
+	uart4_gpio8: uart4-gpio8 {
 		pin-tx {
 			pins = "gpio8";
 			function = "alt4";
@@ -1057,7 +1058,7 @@
 			bias-pull-up;
 		};
 	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
 		pin-cts {
 			pins = "gpio10";
 			function = "alt4";
@@ -1069,7 +1070,7 @@
 			bias-disable;
 		};
 	};
-	uart5_gpio12: uart5_gpio12 {
+	uart5_gpio12: uart5-gpio12 {
 		pin-tx {
 			pins = "gpio12";
 			function = "alt4";
@@ -1081,7 +1082,7 @@
 			bias-pull-up;
 		};
 	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
 		pin-cts {
 			pins = "gpio14";
 			function = "alt4";
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index a037d2bc5b11..bb7e8f7facaf 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -152,41 +152,41 @@
 };
 
 &gpio {
-	i2c_slave_gpio18: i2c_slave_gpio18 {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 
-	jtag_gpio4: jtag_gpio4 {
+	jtag_gpio4: jtag-gpio4 {
 		brcm,pins = <4 5 6 12 13>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
 
-	pwm0_gpio12: pwm0_gpio12 {
+	pwm0_gpio12: pwm0-gpio12 {
 		brcm,pins = <12>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm0_gpio18: pwm0_gpio18 {
+	pwm0_gpio18: pwm0-gpio18 {
 		brcm,pins = <18>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm0_gpio40: pwm0_gpio40 {
+	pwm0_gpio40: pwm0-gpio40 {
 		brcm,pins = <40>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio13: pwm1_gpio13 {
+	pwm1_gpio13: pwm1-gpio13 {
 		brcm,pins = <13>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio19: pwm1_gpio19 {
+	pwm1_gpio19: pwm1-gpio19 {
 		brcm,pins = <19>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm1_gpio41: pwm1_gpio41 {
+	pwm1_gpio41: pwm1-gpio41 {
 		brcm,pins = <41>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio45: pwm1_gpio45 {
+	pwm1_gpio45: pwm1-gpio45 {
 		brcm,pins = <45>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 9b9a18bbb20a..02ce817868ba 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -107,6 +96,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index f664e4fced93..3fdf60eb11dc 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -102,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 248feb2ed23d..9956fd06a4b6 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -109,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index f5b66d3f4ff3..4e1770afb145 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -102,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index f589bede2b11..eec1d0892d33 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -96,6 +92,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index e4e6b6abbfc1..750cd76948e3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
index 8a55b6cded59..4e7b4a592da7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -7,6 +7,23 @@
 
 #include <dt-bindings/power/raspberrypi-power.h>
 
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
 &v3d {
 	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
 };
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 596bb1ef994e..dbf825985ec0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +24,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -110,6 +106,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index a65c2bca69ea..f80e65a825fd 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -104,6 +100,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 87ddcad76083..ee9ee9d1fe65 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,16 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	leds {
-		compatible = "gpio-leds";
-
-		led-act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1c90e5a44283..15cb331febbb 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 3635502b1e0a..6068ec390081 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -109,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
index c4c858b984c6..48b03b55ff56 100644
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 534dacfc4dd5..783fe624ba68 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
@@ -11,7 +10,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
@@ -113,6 +112,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index f7222a28903e..3548306dfbcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -18,19 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &firmware {
@@ -124,6 +112,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index ec721d323ac5..2f1800cbc522 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -3,6 +3,7 @@
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -19,19 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &bt {
@@ -130,6 +118,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index fb6a417d73e7..61270340075c 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
@@ -19,12 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &bt {
@@ -129,6 +124,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index f57b4ca145dd..1e4e4946b6b6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -9,14 +9,6 @@
 		reg = <0 0x40000000>;
 	};
 
-	leds {
-		/*
-		 * Since there is no upstream GPIO driver yet,
-		 * remove the incomplete node.
-		 */
-		/delete-node/ led-act;
-	};
-
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
index 4a768562985e..b9cc4594398b 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +23,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -109,6 +104,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 5dbdebc46259..84c08b46519d 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,6 +1,5 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
@@ -115,6 +114,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
diff --git a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index d2d9c6e67f39..c9c52a19ef3b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -135,17 +135,17 @@
 			 * groups only make sense to switch to a
 			 * particular function together.
 			 */
-			dpi_gpio0: dpi_gpio0 {
+			dpi_gpio0: dpi-gpio0 {
 				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
 					     12 13 14 15 16 17 18 19
 					     20 21 22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			emmc_gpio22: emmc_gpio22 {
+			emmc_gpio22: emmc-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			emmc_gpio34: emmc_gpio34 {
+			emmc_gpio34: emmc-gpio34 {
 				brcm,pins = <34 35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF
@@ -155,95 +155,95 @@
 					     BCM2835_PUD_UP
 					     BCM2835_PUD_UP>;
 			};
-			emmc_gpio48: emmc_gpio48 {
+			emmc_gpio48: emmc-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
 
-			gpclk0_gpio4: gpclk0_gpio4 {
+			gpclk0_gpio4: gpclk0-gpio4 {
 				brcm,pins = <4>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio5: gpclk1_gpio5 {
+			gpclk1_gpio5: gpclk1-gpio5 {
 				brcm,pins = <5>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio42: gpclk1_gpio42 {
+			gpclk1_gpio42: gpclk1-gpio42 {
 				brcm,pins = <42>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio44: gpclk1_gpio44 {
+			gpclk1_gpio44: gpclk1-gpio44 {
 				brcm,pins = <44>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio6: gpclk2_gpio6 {
+			gpclk2_gpio6: gpclk2-gpio6 {
 				brcm,pins = <6>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio43: gpclk2_gpio43 {
+			gpclk2_gpio43: gpclk2-gpio43 {
 				brcm,pins = <43>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 				brcm,pull = <BCM2835_PUD_OFF>;
 			};
 
-			i2c0_gpio0: i2c0_gpio0 {
+			i2c0_gpio0: i2c0-gpio0 {
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio28: i2c0_gpio28 {
+			i2c0_gpio28: i2c0-gpio28 {
 				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio44: i2c0_gpio44 {
+			i2c0_gpio44: i2c0-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT1>;
 			};
-			i2c1_gpio2: i2c1_gpio2 {
+			i2c1_gpio2: i2c1-gpio2 {
 				brcm,pins = <2 3>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c1_gpio44: i2c1_gpio44 {
+			i2c1_gpio44: i2c1-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			jtag_gpio22: jtag_gpio22 {
+			jtag_gpio22: jtag-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			pcm_gpio18: pcm_gpio18 {
+			pcm_gpio18: pcm-gpio18 {
 				brcm,pins = <18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			pcm_gpio28: pcm_gpio28 {
+			pcm_gpio28: pcm-gpio28 {
 				brcm,pins = <28 29 30 31>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			sdhost_gpio48: sdhost_gpio48 {
+			sdhost_gpio48: sdhost-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 
-			spi0_gpio7: spi0_gpio7 {
+			spi0_gpio7: spi0-gpio7 {
 				brcm,pins = <7 8 9 10 11>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi0_gpio35: spi0_gpio35 {
+			spi0_gpio35: spi0-gpio35 {
 				brcm,pins = <35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi1_gpio16: spi1_gpio16 {
+			spi1_gpio16: spi1-gpio16 {
 				brcm,pins = <16 17 18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
-			spi2_gpio40: spi2_gpio40 {
+			spi2_gpio40: spi2-gpio40 {
 				brcm,pins = <40 41 42 43 44 45>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			uart0_gpio14: uart0_gpio14 {
+			uart0_gpio14: uart0-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
@@ -252,50 +252,50 @@
 			 * people often run uart0 on the two pins
 			 * without flow control.
 			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
 			};
-			uart0_gpio32: uart0_gpio32 {
+			uart0_gpio32: uart0-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
 			};
-			uart0_gpio36: uart0_gpio36 {
+			uart0_gpio36: uart0-gpio36 {
 				brcm,pins = <36 37>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
 				brcm,pins = <38 39>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			uart1_gpio14: uart1_gpio14 {
+			uart1_gpio14: uart1-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio32: uart1_gpio32 {
+			uart1_gpio32: uart1-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio40: uart1_gpio40 {
+			uart1_gpio40: uart1-gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
 				brcm,pins = <42 43>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 09ee3e46c0cc..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -28,40 +28,39 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 32619c6045d3..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -28,24 +28,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index a658b9b7bcec..e583b9cbf07c 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -37,7 +37,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			/* label = "bcm53xx:blue:usb"; */
 			function = LED_FUNCTION_USB;
 			color = <LED_COLOR_ID_BLUE>;
@@ -48,14 +48,14 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			/* label = "bcm53xx:red:power"; */
 			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			/* label = "bcm53xx:white:power"; */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
@@ -63,7 +63,7 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			/*  label = "bcm53xx:blue:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -71,14 +71,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			/* label = "bcm53xx:amber:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			/* label = "bcm53xx:blue:wan"; */
 			function = LED_FUNCTION_WAN;
 			color = <LED_COLOR_ID_BLUE>;
@@ -86,14 +86,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			/* label = "bcm53xx:blue:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			/* label = "bcm53xx:amber:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_AMBER>;
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index f8f53457dd43..43c698a0a7c3 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 14ee410183af..6de7fe204b0c 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 600ab087f5e5..f5b75ba93512 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -42,7 +42,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fd6d8d2a4456..89155caf50be 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -29,24 +29,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@
 			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 76fc1099d47d..57d00a0b4765 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -28,29 +28,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 6bcdfb73cb9e..26cdeb5cc337 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -28,64 +28,64 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index ca47cc4f2ba1..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -28,30 +28,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 0edc2543e568..407319cb5c0d 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 1f0998f34afd..f8622ecce6a2 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index c8c02377543b..76c9b30b868d 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 3b35a7af4b1c..6ef0c0788e62 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -29,62 +29,62 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3 {
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan4 {
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan2 {
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan1 {
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 19a7971b5a00..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index f52a75c4ca09..4f44cb4df704 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -28,18 +28,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 5ff6c588e16e..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -28,48 +28,48 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index de961fbb6200..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -28,43 +28,43 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 087f7f60de18..14303ab521ea 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -39,59 +39,59 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 11d1068160da..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -104,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index a5fec56d11c0..a50ff686b557 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -33,37 +33,37 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "white:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "white:lan";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "white:usb2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port1>, <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "white:wps";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 2c38b642a8b8..555fbe41dd8f 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -43,28 +43,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,12 +72,12 @@
 			linux,default-trigger = "usbport";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..d945a20b06e0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 86c7cc0fa70e..d9a16a820e7f 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -52,19 +52,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:green:usb2";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,58 +72,58 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wifi-disabled {
+		led-wifi-disabled {
 			label = "bcm53xx:amber:wifi-disabled";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi-enabled {
+		led-wifi-enabled {
 			label = "bcm53xx:white:wifi-enabled";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar1 {
+		led-bluebar1 {
 			label = "bcm53xx:white:bluebar1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar2 {
+		led-bluebar2 {
 			label = "bcm53xx:white:bluebar2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar3 {
+		led-bluebar3 {
 			label = "bcm53xx:white:bluebar3";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		bluebar4 {
+		led-bluebar4 {
 			label = "bcm53xx:white:bluebar4";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar5 {
+		led-bluebar5 {
 			label = "bcm53xx:white:bluebar5";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar6 {
+		led-bluebar6 {
 			label = "bcm53xx:white:bluebar6";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar7 {
+		led-bluebar7 {
 			label = "bcm53xx:white:bluebar7";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar8 {
+		led-bluebar8 {
 			label = "bcm53xx:white:bluebar8";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 9ad15bcae1ca..41a0722fa64a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -30,13 +30,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index ee24d3768536..c56c7e366848 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -23,18 +23,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index 6549d07b9887..1b5c91a524ac 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -30,13 +30,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 654fcce9fded..739063b77b1f 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -25,7 +25,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index bf053a2fcc7c..7afc68d5d2c2 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -30,38 +30,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3	{
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan4	{
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan	{
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1	{
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan2	{
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -69,18 +69,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 78a90dd57a4e..60a2c441d5bd 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -33,13 +33,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -47,18 +47,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f850dce37b20..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -25,38 +25,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index e20b6d2eb274..0734aa249b8e 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -23,13 +23,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 9d863570fcf3..e6fb6cbe6963 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -20,26 +20,26 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 55b92645b0f1..dab2e5f63a72 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
index 2df04528af82..f4b2db9bc4ab 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index e678bc03d816..46c2c93b01d8 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -58,7 +58,7 @@
 	pwm-leds {
 		compatible = "pwm-leds";
 
-		red {
+		led-0 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
@@ -66,7 +66,7 @@
 			max-brightness = <255>;
 		};
 
-		green {
+		led-1 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -74,7 +74,7 @@
 			max-brightness = <255>;
 		};
 
-		blue {
+		led-2 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
index df5307b6b3af..7cd55d64de71 100644
--- a/arch/arm/boot/dts/bcm63148.dtsi
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
index cbd094dde6d0..043e699cbc27 100644
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -43,6 +43,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
index ce1b59faf800..5c72219bc194 100644
--- a/arch/arm/boot/dts/bcm6756.dtsi
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
index 8aa47a2583b2..81513a793815 100644
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
index 620f51aee1a2..5fa5feac0e29 100644
--- a/arch/arm/boot/dts/bcm6855.dtsi
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -43,6 +43,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
index 1e8b5fa96c25..4ec836ac4baf 100644
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index 16e70a264faf..3709baa2376f 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..9aee3cfd3e98 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -139,7 +139,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 68c43eb12c1a..4cdffd6db740 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -151,7 +151,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 87deb6a76eff..8cbcf55a5a33 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -483,7 +483,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8948e10dbeb8..c79ba671ec2b 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -356,7 +356,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -490,7 +490,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 935e2359f8df..94944cc21931 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -104,7 +104,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 326b9e0ed8d3..a2d6ee7fff08 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -485,7 +485,7 @@
 		};
 
 		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
+			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
index 74e8a6cd8bed..a28e083f29d5 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -99,7 +99,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 7272edd85a49..a02981d4a3fc 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -111,7 +111,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
index cf77d894f6d7..c5797ff35b71 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-iris.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -138,7 +138,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index b4605edfd2ab..d8fa83effd63 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -364,8 +364,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 023e76215064..d8f985f297e4 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -24,6 +24,13 @@
 		status = "disabled";
 	};
 
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -105,7 +112,7 @@
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -670,9 +677,16 @@
 	status = "disabled";
 };
 
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
 &usbotg {
 	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 	status = "disabled";
 };
 
@@ -986,7 +1000,7 @@
 
 	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
 		fsl,pins = <
-			/* USBH_EN */
+			/* SODIMM 129 / USBH_PEN */
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
 		>;
 	};
@@ -1055,7 +1069,7 @@
 
 	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			/* USBC_DET */
+			/* SODIMM 137 / USBC_DET */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
 			/* USBC_DET_OVERWRITE */
 			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 22f8e2783cdf..12573e1f917c 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -14,6 +14,11 @@
 		stdout-path = &uart2;
 	};
 
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
diff --git a/arch/arm/boot/dts/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
new file mode 100644
index 000000000000..657d0f1b6115
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 663ee9df79e6..da1399057634 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -18,6 +18,21 @@
 	model = "Tolino Shine 2 HD";
 	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -65,6 +80,12 @@
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
 	};
 
 	memory@80000000 {
@@ -299,6 +320,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
@@ -383,7 +410,8 @@
 
 	pinctrl_led: ledgrp {
 		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
index e3f1e8d79528..db5d8509935f 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
index 90b32f5eb529..c7cfe0b70f04 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index abc3572d699e..80f5efd65c2f 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1391,7 +1391,7 @@
 
 			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
+				reg = <0x022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 3cddc68917a0..5168ed0ffec3 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -102,6 +102,10 @@
 	status = "disabled";
 };
 
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
index d3f2fb7c6c1e..3e0897c3a296 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
@@ -15,6 +15,46 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
index 9bf7111d7b00..d6da984e518d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
@@ -12,3 +12,27 @@
 	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
index afc1e0119783..f6b31118be17 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -15,13 +15,21 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
 
+&backlight {
+	status = "okay";
+};
+
 &gpio1 {
 	/* This turns the LVDS transceiver on */
-	lvds-power-on {
+	lvds-power-on-hog {
 		gpio-hog;
 		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
 		line-name = "LVDS_POWER_ON";
@@ -34,7 +42,7 @@
 	 * This switches the LVDS transceiver to the single-channel
 	 * output mode.
 	 */
-	lvds-ch-mode {
+	lvds-ch-mode-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
 		line-name = "LVDS_CH_MODE";
@@ -44,7 +52,7 @@
 	/*
 	 * This switches the LVDS transceiver to the 24-bit RGB mode.
 	 */
-	lvds-rgb-mode {
+	lvds-rgb-mode-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
 		line-name = "LVDS_RGB_MODE";
@@ -56,10 +64,42 @@
 	/*
 	 * This switches the LVDS transceiver to VESA color mapping mode.
 	 */
-	lvds-color-map {
+	lvds-color-map-hog {
 		gpio-hog;
 		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
 		line-name = "LVDS_COLOR_MAP";
 		output-low;
 	};
 };
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
index 4fb97b0fe30b..2a0d0fc3b9d6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
@@ -15,6 +15,26 @@
 		     "fsl,imx6ull";
 };
 
-&atmel_mxt_ts {
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
index 7f3b37baba88..166a0aefc869 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -59,7 +59,7 @@
 	 * in userspace.
 	 * The same applies to uart1_tx_on.
 	 */
-	uart25_tx_on {
+	uart25_tx_on-hog {
 		gpio-hog;
 		gpios = <15 0>;
 		output-high;
@@ -67,7 +67,7 @@
 };
 
 &gpio2 {
-	uart1_tx_on {
+	uart1_tx_on-hog {
 		gpio-hog;
 		gpios = <7 0>;
 		output-high;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
index b4f65e8c5857..c7da5b41966f 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
@@ -15,6 +15,46 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
index 1d64d1a5d8a7..917f5dbe64ba 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
@@ -12,3 +12,27 @@
 	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
index ce02f8a9ddd3..488da6df56fa 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -15,13 +15,21 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
 
+&backlight {
+	status = "okay";
+};
+
 &gpio1 {
 	/* This turns the LVDS transceiver on */
-	lvds-power-on {
+	lvds-power-on-hog {
 		gpio-hog;
 		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
 		line-name = "LVDS_POWER_ON";
@@ -34,7 +42,7 @@
 	 * This switches the LVDS transceiver to the single-channel
 	 * output mode.
 	 */
-	lvds-ch-mode {
+	lvds-ch-mode-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
 		line-name = "LVDS_CH_MODE";
@@ -44,7 +52,7 @@
 	/*
 	 * This switches the LVDS transceiver to the 24-bit RGB mode.
 	 */
-	lvds-rgb-mode {
+	lvds-rgb-mode-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
 		line-name = "LVDS_RGB_MODE";
@@ -56,10 +64,26 @@
 	/*
 	 * This switches the LVDS transceiver to VESA color mapping mode.
 	 */
-	lvds-color-map {
+	lvds-color-map-hog {
 		gpio-hog;
 		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
 		line-name = "LVDS_COLOR_MAP";
 		output-low;
 	};
 };
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
index 5ac1aa298ce7..e63253254754 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
@@ -15,6 +15,26 @@
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 577a424b0e1d..336ab2e0534c 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -21,7 +21,29 @@
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		power-supply = <&reg_3v3>;
 		pwms = <&pwm4 0 5000000 1>;
-		status = "okay";
+		status = "disabled";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 
 	gpio-keys {
@@ -42,7 +64,7 @@
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
-		status = "okay";
+		status = "disabled";
 
 		port {
 			lcd_panel_in: endpoint {
@@ -159,7 +181,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
+	status = "disabled";
 
 	/* Atmel maxtouch controller */
 	atmel_mxt_ts: touchscreen@4a {
@@ -202,6 +224,7 @@
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -209,6 +232,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
 
 	port {
 		lcdif_out: endpoint {
@@ -278,6 +302,13 @@
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* Colibri USBH */
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a8c31ee65623..f8b8372b6851 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -29,7 +29,6 @@
 
 	extcon_usbc_det: usbc-det {
 		compatible = "linux,extcon-usb-gpio";
-		debounce = <25>;
 		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usbc_det>;
@@ -652,7 +651,7 @@
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +659,7 @@
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index a2a91bfdd98e..8b2f11e85e05 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -22,6 +22,28 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	reg_brcm: regulator-brcm {
 		compatible = "regulator-fixed";
 		regulator-name = "brcm_reg";
@@ -84,6 +106,32 @@
 	};
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -177,6 +225,13 @@
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -184,6 +239,13 @@
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index a7636fe28501..681343c1357a 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -187,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 2adb17c955aa..a9a8e6b744c7 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index f84a48539917..6dc6579d4524 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index c32300611d2c..f9f4b0143ba8 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -211,18 +211,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -268,7 +268,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index f48609e95afe..3912f1b525b6 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
index 86907be70cf9..1d4256ef325d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -47,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 95af7aa1fdcb..aed20185fd7a 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -187,7 +187,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
index 75dc83914f56..52baffe45f12 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -39,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
index 0d81c43a6a73..60c1e94f5dd3 100644
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -223,18 +223,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan6";
+				reg = <2>;
+				label = "lan6";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan2";
+				reg = <3>;
+				label = "lan2";
 			};
 
 			port@4 {
@@ -282,18 +282,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan8";
+				reg = <1>;
+				label = "lan8";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan4";
+				reg = <2>;
+				label = "lan4";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "dmz";
+				reg = <3>;
+				label = "dmz";
 			};
 
 			switch1port5: port@5 {
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index 6158214a939a..8c2b540eaf4f 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -160,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
index 407d6d8b3a7f..b54c9980f636 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -156,7 +156,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index b80d12f6aa49..e87ea7146546 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -8,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -66,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -79,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -208,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 2e1a75348908..ced576acfb95 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -170,7 +170,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
index 6a2934b7d0ce..0b0a15093146 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/kirkwood-nas2big.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
index 3e3ac289e5b0..d5f6bb50ba11 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -46,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index cba8a2b6f6d9..2497ad26b5b6 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -78,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index b13aee570804..6cf76430cfab 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -78,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -266,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 9b861c2e76c5..c1799a07816e 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310s.dts b/arch/arm/boot/dts/kirkwood-nsa310s.dts
new file mode 100644
index 000000000000..49da633a1bc0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index b69b096f267b..652405e65006 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -211,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
index 6f8085dbb1f4..371456de34b2 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -224,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
index 8f73197f251a..ea3d36512e9f 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -150,7 +150,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index 712d6042b132..f00325ffde07 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -31,10 +31,10 @@
 			pinctrl-0 = <&pmx_usb_power>;
 			pinctrl-names = "default";
 
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
 		};
 
 		serial@12000 {
@@ -62,43 +62,43 @@
 	};
 
 	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
 	};
 };
 
 &mdio {
-        status = "okay";
+	status = "okay";
 
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
 };
 
 &eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index 9d88301daf0e..72edd47e19ff 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 };
 
 &eth1 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &switch {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index f1f8eee132e8..e21aa674945d 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -48,7 +48,7 @@
 			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 			/* No WP GPIO */
 		};
-       };
+	};
 };
 
 &nand {
@@ -126,7 +126,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
index c51cea883215..4ad412115a24 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 8f6c387d3a8b..9b6666020cdd 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -847,7 +847,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index fe63b3a03a72..ad093324e075 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -219,7 +219,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 994cabcf4b51..1939462a5f48 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -86,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -98,7 +98,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index fca31a5d5ac7..815ef7719d13 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -24,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -279,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -299,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
index 77187f59f04d..8804e8ba5370 100644
--- a/arch/arm/boot/dts/lan966x-pcb8290.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -58,41 +58,57 @@
 
 	ext_phy0: ethernet-phy@7 {
 		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy1: ethernet-phy@8 {
 		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy2: ethernet-phy@9 {
 		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy3: ethernet-phy@10 {
 		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy4: ethernet-phy@15 {
 		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy5: ethernet-phy@16 {
 		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy6: ethernet-phy@17 {
 		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy7: ethernet-phy@18 {
 		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 };
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index f4f054cdf2a8..3a3d76af8612 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -69,6 +69,12 @@
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 0bf818713422..05b73f7cf0c7 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -157,6 +157,11 @@
 			};
 		};
 
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
 		flx0: flexcom@e0040000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe0040000 0x100>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index d3da8b1b473b..e0cbac500e17 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm {
+	pwm10: pwm-10 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 3a5228562b0d..72b5af475d09 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -20,7 +20,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user0 {
+		led-user0 {
 			label = "user0";
 			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
 			linux,default-trigger = "none";
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index c87066d6c995..974410918f35 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -315,7 +315,7 @@
 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
-				ranges = <0x0 0x040004000 0x00001000>;
+				ranges = <0x0 0x40004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
index f3ddea934f1b..d2cae8c7d7a6 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -30,11 +30,11 @@
 	};
 
 	reg_3p3v: regulator-3p3v {
-		  compatible = "regulator-fixed";
-		  regulator-name = "3P3V";
-		  regulator-min-microvolt = <3300000>;
-		  regulator-max-microvolt = <3300000>;
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index c7a1f3ffc48c..f7cc8fc678fa 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -133,7 +133,7 @@
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
 
-	pwm8: dmtimer-pwm-8 {
+	pwm8: pwm-8 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_direction_pin>;
 
@@ -143,7 +143,7 @@
 		ti,clock-source = <0x01>;
 	};
 
-	pwm9: dmtimer-pwm-9 {
+	pwm9: pwm-9 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_enable_pin>;
 
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index d10669fcd527..9e9eba8bad5e 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index 491606c4f044..2a394cc15284 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index a0c2d7652625..f7b38bee039b 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 3dad32834e5e..f53d45fa1de8 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281fc..87359ab05db3 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 3ee61251a16d..b78c116cbc18 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -15,6 +15,11 @@
 	model = "Supermicro X9SCi-LN4F BMC";
 	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -53,6 +58,33 @@
 	};
 };
 
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
 &pinctrl {
 	key_pins: mux-keys {
 		groups = "gspi", "sspi";
@@ -77,7 +109,3 @@
 	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
 	status = "okay";
 };
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 93595850a4c3..b637241316bb 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -37,6 +37,14 @@
 		#clock-cells = <0>;
 	};
 
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -49,6 +57,15 @@
 			reg = <0xb0000000 0x200>;
 		};
 
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		serial0: serial@b8000000 {
 			compatible = "nuvoton,wpcm450-uart";
 			reg = <0xb8000000 0x20>;
@@ -81,7 +98,6 @@
 			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xb800101c 0x4>;
 			clocks = <&clk24m>;
-			status = "disabled";
 		};
 
 		aic: interrupt-controller@b8002000 {
@@ -456,5 +472,21 @@
 				function = "hg7";
 			};
 		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index ce6c235f68ec..3046ec572632 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index e7534fe9c53c..bc8961f3690f 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 0548b391334f..47ff1ffddfc5 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -28,18 +28,18 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pmu_stat {
+		led-pmu-stat {
 			label = "beagleboard::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "beagleboard::usr0";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "beagleboard::usr1";
 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 3b8349094baa..f25c0a84a190 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@
 	model = "CompuLab CM-T3517";
 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
 
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 54cd37336be7..38aa1febc33f 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -15,28 +15,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		led-heartbeat {
 			label = "devkit8000::led1";
 			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "devkit8000::led2";
 			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};
 
-		usr {
+		led-usr {
 			label = "devkit8000::led3";
 			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
 		};
 
-		pmu_stat {
+		led-pmu-stat {
 			label = "devkit8000::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 8f02ff5e7da6..06d2377d28ad 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -146,7 +146,7 @@
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
 		multi-led@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 28a6a9345be5..87e0ab1bbe95 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -147,7 +147,7 @@
 		pinctrl-0 = <&backlight_pins>;
 	};
 
-	pwm11: dmtimer-pwm {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
@@ -332,7 +332,7 @@
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
-       };
+	};
 
 	gps_pins: pinmux_gps_pins {
 		pinctrl-single,pins = <
@@ -853,8 +853,8 @@
 };
 
 &hdqw1w {
-        pinctrl-names = "default";
-        pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
 };
 
 /* image signal processor within OMAP3 SoC */
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 36fc8805e0c1..85f33bbb566f 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -301,5 +301,5 @@
 
 &vaux1 {
 	/* Needed for ads7846 */
-        regulator-name = "vcc";
+	regulator-name = "vcc";
 };
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index dd7971556449..6ba2e8f81973 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -49,7 +49,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "debug::sleep";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
 			linux,default-trigger = "default-on";
@@ -156,7 +156,7 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	pwm9: dmtimer-pwm {
+	pwm9: pwm-9 {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
 		ti,timers = <&timer9>;
@@ -236,27 +236,27 @@
 		pinctrl-single,pins = <
 
 			/* address lines */
-                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 
 			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 
 			/*
 			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 			 */
-                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
@@ -738,12 +738,12 @@
 
 	si4713: si4713@63 {
 		compatible = "silabs,si4713";
-                reg = <0x63>;
+		reg = <0x63>;
 
-                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-                vio-supply = <&vio>;
-                vdd-supply = <&vaux1>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
 	};
 
 	bq24150a: bq24150a@6b {
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index bb932913c9e3..a6dbbba799b2 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -17,19 +17,19 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		gpio148 {
+		led-gpio148 {
 			label = "overo:red:gpio148";
 			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
 		};
-		gpio150 {
+		led-gpio150 {
 			label = "overo:yellow:gpio150";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
 		};
-		gpio151 {
+		led-gpio151 {
 			label = "overo:blue:gpio151";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
 		};
-		gpio170 {
+		led-gpio170 {
 			label = "overo:green:gpio170";
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 2d2c61d7aa86..0d0e62c00916 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 155aec121400..5f6721326f86 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 82a04466747a..4b66f622ac13 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 453a55324fa1..a8f163a899f0 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
index df7450f17ffd..ec03ca17e98b 100644
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -15,7 +15,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9bf4b88a4b50..5432e4e16ab5 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -13,7 +13,7 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 0482676d1830..ce58b1f208e8 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -23,9 +23,9 @@
 	};
 
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -84,28 +84,28 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
@@ -205,22 +205,22 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &uart4 {
-       status = "disabled";
+	status = "disabled";
 };
 
 &usb_otg_hs {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 825075ff0e34..92cd4c99dae7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -893,15 +893,37 @@
 			#gpio-cells = <2>;
 		};
 
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
+		usb_otg_target: target-module@480ab000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480ab400 0x4>,
+			      <0x480ab404 0x4>,
+			      <0x480ab408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Clock defined in the SoC specific dtsi file */
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x480ab000 0x1000>;
+
+			usb_otg_hs: usb@0 {
+				compatible = "ti,omap3-musb";
+				reg = <0 0x1000>;
+				interrupts = <92>, <93>;
+				interrupt-names = "mc", "dma";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+			};
 		};
 
 		dss: dss@48050000 {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 2eb73ae7ef3e..9dbf62797f0f 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -189,6 +189,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 32ac7924a130..fff9c3d34193 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -240,6 +240,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index 4d7eeb133dad..801b4f10350c 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal {
 	polling-delay = <1000>; /* milliseconds */
 
 			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
 
 	cpu_cooling_maps: cooling-maps {
 		map0 {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 518652a599bd..0269424350aa 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -49,13 +49,13 @@
 			&led_wkgpio_pins
 		>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "pandaboard::status1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "pandaboard::status2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 7c6886cd738f..7631029e4d7a 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -79,10 +79,10 @@
 		&led_wkgpio_pins
 	>;
 
-	heartbeat {
+	led-heartbeat {
 		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 	};
-	mmc {
+	led-mmc {
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..2d87b9fc230e 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -84,36 +84,36 @@
 	};
 
 	lcd0: display {
-                compatible = "startek,startek-kd050c", "panel-dpi";
-                label = "lcd";
-
-                pinctrl-names = "default";
-                pinctrl-0 = <&lcd_pins>;
-
-                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-                panel-timing {
-                        clock-frequency = <33000000>;
-                        hactive = <800>;
-                        vactive = <480>;
-                        hfront-porch = <40>;
-                        hback-porch = <40>;
-                        hsync-len = <43>;
-                        vback-porch = <29>;
-                        vfront-porch = <13>;
-                        vsync-len = <3>;
-                        hsync-active = <0>;
-                        vsync-active = <0>;
-                        de-active = <1>;
-                        pixelclk-active = <1>;
-                };
-
-                port {
-                        lcd_in: endpoint {
-                                remote-endpoint = <&dpi_lcd_out>;
-                        };
-                };
-        };
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
 
 	hdmi0: connector0 {
 		compatible = "hdmi-connector";
@@ -644,8 +644,8 @@
 };
 
 &usb3 {
-       extcon = <&extcon_usb3>;
-       vbus-supply = <&smps10_out1_reg>;
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index 4fe7735c7c58..16212b912b94 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -53,6 +53,8 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
 			uart1: serial@d4017000 {
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
index 215613c65250..7a80e1c9f126 100644
--- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -87,7 +87,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
new file mode 100644
index 000000000000..d64096028ab1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "Huawei Watch";
+	compatible = "huawei,sturgeon", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 4>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vio-supply = <&pm8226_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-voltage = <4370000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,minimum-input-voltage = <4350000>;
+	qcom,fast-charge-current-limit = <300000>;
+	qcom,fast-charge-safe-current = <600000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio63", "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default_state: touch-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 193569f0ca5f..de2fb1c01b6e 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -13,6 +13,7 @@
 / {
 	model = "LG G Watch R";
 	compatible = "lg,lenok", "qcom,apq8026";
+	chassis-type = "watch";
 	qcom,board-id = <132 0x0a>;
 	qcom,msm-id = <199 0x20000>;
 
@@ -115,7 +116,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
@@ -299,8 +300,8 @@
 		input-enable;
 	};
 
-	touch_pins: touch {
-		irq {
+	touch_pins: touch-state {
+		irq-pins {
 			pins = "gpio17";
 			function = "gpio";
 
@@ -309,7 +310,7 @@
 			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio16";
 			function = "gpio";
 
diff --git a/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
new file mode 100644
index 000000000000..1c52337af560
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1";
+	compatible = "samsung,matisse-wifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		/delete-node/ smem@3000000;
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default_state>;
+
+		st,drdy-int-pin = <1>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+
+		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 573e4dc66bb0..7a4c59e04af6 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -81,931 +81,899 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
 	};
+};
 
-	soc {
-		pinctrl@800000 {
-			/* eMMC pins, all 8 data lines connected */
-			dragon_sdcc1_pins: sdcc1 {
-				mux {
-					pins = "gpio159", "gpio160", "gpio161",
-					     "gpio162", "gpio163", "gpio164",
-					     "gpio165", "gpio166", "gpio167",
-					     "gpio168";
-					     function = "sdc1";
-				};
-				clk {
-					pins = "gpio167"; /* SDC1 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio168"; /* SDC1 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC1 D0 to D7 */
-					pins = "gpio159", "gpio160", "gpio161", "gpio162",
-					     "gpio163", "gpio164", "gpio165", "gpio166";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&ebi2 {
+	/* The EBI2 will instantiate first, then populate its children */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_ebi2_pins>;
+	status = "okay";
 
-			/*
-			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-			 * configuration.
-			 */
-			dragon_sdcc3_pins: sdcc3 {
-				clk {
-					pins = "sdc3_clk";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				data {
-					pins = "sdc3_data";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
+	/*
+	 * An on-board SMSC LAN9221 chip for "debug ethernet",
+	 * which is actually just an ordinary ethernet on the
+	 * EBI2. This has a 25MHz chrystal next to it, so no
+	 * clocking is needed.
+	 */
+	ethernet@2,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <2 0x0 0x100>;
+		/*
+		 * The second interrupt is the PME interrupt
+		 * for network wakeup, connected to the TLMM.
+		 */
+		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+		vdd33a-supply = <&dragon_veth>;
+		vddvario-supply = <&dragon_vario>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ethernet_gpios>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,force-external-phy;
+		smsc,irq-push-pull;
+
+		/*
+		 * SLOW chipselect config
+		 * Delay 9 cycles (140ns@64MHz) between SMSC
+		 * LAN9221 Ethernet controller reads and writes
+		 * on CS2.
+		 */
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
 
-			/* Second SD card slot pins */
-			dragon_sdcc5_pins: sdcc5 {
-				mux {
-					pins = "gpio95", "gpio96", "gpio97",
-					    "gpio98", "gpio99", "gpio100";
-					function = "sdc5";
-				};
-				clk {
-					pins = "gpio97"; /* SDC5 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio95"; /* SDC5 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC5 D0 to D3 */
-					pins = "gpio96", "gpio98", "gpio99", "gpio100";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			dragon_gsbi3_i2c_pins: gsbi3_i2c {
-				mux {
-					pins = "gpio43", "gpio44";
-					function = "gsbi3";
-				};
-				pinconf {
-					pins = "gpio43", "gpio44";
-					drive-strength = <8>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi3_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,cy8ctma340";
+		reg = <0x24>;
+		/* Certainly we can do at least 400 kHz */
+		clock-frequency = <400000>;
+		/* IRQ on GPIO61 called /CTP_INT */
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The I2C bus is using a PCA9306 level translator from L16A
+		 * to L2B so these two voltages are needed and L16A is
+		 * kind of the IO voltage, however L16Aisn't really fed to
+		 * the TMA340, which relies entirely on L2B (PM8901 L2).
+		 */
+		vcpin-supply = <&pm8058_l16>;
+		vdd-supply = <&pm8901_l2>;
+		/* GPIO58, called WAKE_CTP */
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		active-interval-ms = <0>;
+		touch-timeout-ms = <255>;
+		lowpower-interval-ms = <10>;
+		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_tma340_gpios>;
+	};
+};
 
-			dragon_gsbi8_i2c_pins: gsbi8_i2c {
-				mux {
-					pins = "gpio64", "gpio65";
-					function = "gsbi8";
-				};
-				pinconf {
-					pins = "gpio64", "gpio65";
-					drive-strength = <16>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			dragon_gsbi12_i2c_pins: gsbi12_i2c {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "gsbi12";
-				};
-				pinconf {
-					pins = "gpio115", "gpio116";
-					drive-strength = <16>;
-					/* These have external pull-up 4.7kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi8_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+	status = "okay";
+
+	eeprom@52 {
+		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		vcc-supply = <&pm8058_s3>;
+		pagesize = <64>;
+	};
+	wm8903: wm8903@1a {
+		/* This Woolfson Micro device has an unrouted interrupt line */
+		compatible = "wlf,wm8903";
+		reg = <0x1a>;
+
+		AVDD-supply = <&pm8058_l16>;
+		CPVDD-supply = <&pm8058_l16>;
+		DBVDD-supply = <&pm8058_s3>;
+		DCVDD-supply = <&pm8058_l0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		micdet-cfg = <0>;
+		micdet-delay = <100>;
+		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+	};
+};
 
-			/* Primary serial port uart 0 pins */
-			dragon_gsbi12_serial_pins: gsbi12_serial {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "gsbi12";
-				};
-				tx {
-					pins = "gpio117";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				rx {
-					pins = "gpio118";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-			dragon_ebi2_pins: ebi2 {
-				/*
-				 * Pins used by EBI2 on the Dragonboard, actually only
-				 * CS2 is used by a real peripheral. CS0 is just
-				 * routed to a test point.
-				 */
-				mux0 {
-					pins =
-					    /* "gpio39", CS1A_N this is not good to mux */
-					    "gpio40", /* CS2A_N */
-					    "gpio134"; /* CS0_N testpoint TP29 */
-					function = "ebi2cs";
-				};
-				mux1 {
-					pins =
-					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-					    "gpio123", "gpio124", "gpio125", "gpio126",
-					    "gpio127", "gpio128", "gpio129", "gpio130",
-					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-					    "gpio135", "gpio136", "gpio137", "gpio138",
-					    "gpio139", "gpio140", "gpio141", "gpio142",
-					    "gpio143", "gpio144", "gpio145", "gpio146",
-					    "gpio147", "gpio148", "gpio149", "gpio150",
-					    "gpio151", /* EBI2_OE_N */
-					    "gpio153", /* EBI2_ADV */
-					    "gpio157"; /* EBI2_WE_N */
-					function = "ebi2";
-				};
-			};
+&gsbi12_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+	status = "okay";
+};
 
-			/* Interrupt line for the KXSD9 accelerometer */
-			dragon_kxsd9_gpios: kxsd9 {
-				irq {
-					pins = "gpio57"; /* IRQ line */
-					bias-pull-up;
-				};
-			};
+&gsbi12_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+	status = "okay";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ak8975_gpios>;
+		vid-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+	};
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_bmp085_gpios>;
+		vddd-supply = <&pm8058_lvs0>; // 1.8V
+		vdda-supply = <&pm8058_l14>; // 2.85V
+	};
+	mpu3050@68 {
+		compatible = "invensense,mpu3050";
+		reg = <0x68>;
+		/*
+		 * GPIO17 is pulled high by a 10k
+		 * resistor to VLOGIC so needs to be
+		 * active low/falling edge.
+		 */
+		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_mpu3050_gpios>;
+		vlogic-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
 
-			dragon_tma340_gpios: tma340 {
-				reset {
-					/* RESET line, TS_ATTN, WAKE_CTP */
-					pins = "gpio58";
-					function = "gpio";
-					drive-strength = <6>;
-					bias-disable;
-				};
-				irq {
-					pins = "gpio61"; /* IRQ line */
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+		/*
+		 * The MPU-3050 acts as a hub for the
+		 * accelerometer.
+		 */
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			kxsd9@18 {
+				compatible = "kionix,kxsd9";
+				reg = <0x18>;
+				interrupt-parent = <&tlmm>;
+				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_kxsd9_gpios>;
+				iovdd-supply = <&pm8058_lvs0>; // 1.8V
+				vdd-supply = <&pm8058_l14>; // 2.85V
 			};
 		};
+	};
+};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				keypad@148 {
-					linux,keymap = <
-					MATRIX_KEY(0, 0, KEY_MENU)
-					MATRIX_KEY(0, 2, KEY_1)
-					MATRIX_KEY(0, 3, KEY_4)
-					MATRIX_KEY(0, 4, KEY_7)
-					MATRIX_KEY(1, 0, KEY_UP)
-					MATRIX_KEY(1, 1, KEY_LEFT)
-					MATRIX_KEY(1, 2, KEY_DOWN)
-					MATRIX_KEY(1, 3, KEY_5)
-					MATRIX_KEY(1, 3, KEY_8)
-					MATRIX_KEY(2, 0, KEY_HOME)
-					MATRIX_KEY(2, 1, KEY_REPLY)
-					MATRIX_KEY(2, 2, KEY_2)
-					MATRIX_KEY(2, 3, KEY_6)
-					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-					MATRIX_KEY(3, 1, KEY_RIGHT)
-					MATRIX_KEY(3, 2, KEY_3)
-					MATRIX_KEY(3, 3, KEY_9)
-					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-					MATRIX_KEY(4, 1, KEY_BACK)
-					MATRIX_KEY(4, 2, KEY_CAMERA)
-					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-					>;
-					keypad,num-rows = <6>;
-					keypad,num-columns = <5>;
-				};
-
-				gpio@150 {
-					dragon_ethernet_gpios: ethernet-state {
-						pinconf {
-							pins = "gpio7";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_bmp085_gpios: bmp085-state {
-						pinconf {
-							pins = "gpio16";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_mpu3050_gpios: mpu3050-state {
-						pinconf {
-							pins = "gpio17";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc3_gpios: sdcc3-state {
-						pinconf {
-							pins = "gpio22";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc5_gpios: sdcc5-state {
-						pinconf {
-							pins = "gpio26";
-							function = "normal";
-							input-enable;
-							bias-pull-up;
-							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_ak8975_gpios: ak8975-state {
-						pinconf {
-							pins = "gpio33";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_cm3605_gpios: cm3605-state {
-						/* Pin 34 connected to the proxy IRQ */
-						gpio34-pins {
-							pins = "gpio34";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-						/* Pin 35 connected to ASET */
-						gpio35-pins {
-							pins = "gpio35";
-							function = "normal";
-							output-high;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_veth_gpios: veth-state {
-						pinconf {
-							pins = "gpio40";
-							function = "normal";
-							bias-disable;
-							drive-push-pull;
-						};
-					};
-				};
-
-				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps-state {
-						mpp5 {
-							pins = "mpp5";
-							function = "analog";
-							input-enable;
-							bias-high-impedance;
-							/* Let's use channel 5 */
-							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-				};
-
-				xoadc@197 {
-					/* Reference voltage 2.2 V */
-					xoadc-ref-supply = <&pm8058_l18>;
-
-					/* Board-specific channels */
-					mpp5@5 {
-						/* Connected to AOUT of ALS sensor */
-						reg = <0x00 0x05>;
-					};
-					mpp6@6 {
-						/* Connected to test point TP43 */
-						reg = <0x00 0x06>;
-					};
-					mpp7@7 {
-						/* Connected to battery thermistor */
-						reg = <0x00 0x07>;
-					};
-					mpp8@8 {
-						/* Connected to battery ID detector */
-						reg = <0x00 0x08>;
-					};
-					mpp9@9 {
-						/* Connected to XO thermistor */
-						reg = <0x00 0x09>;
-					};
-				};
-
-				led@48 {
-					/*
-					 * The keypad LED @0x48 is routed to
-					 * the sensor board where it is
-					 * connected to an infrared LED
-					 * SFH4650 (60mW, @850nm) next to the
-					 * ambient light and proximity sensor
-					 * Capella Microsystems CM3605.
-					 */
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					label = "pm8058:infrared:proximitysensor";
-					default-state = "off";
-					linux,default-trigger = "cm3605";
-				};
-				led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					label = "pm8058:red";
-					color = <LED_COLOR_ID_RED>;
-					default-state = "off";
-				};
-				led@132 {
-					/*
-					 * This is actually green too on my
-					 * board, but documented as yellow.
-					 */
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					label = "pm8058:yellow";
-					color = <LED_COLOR_ID_YELLOW>;
-					default-state = "off";
-					linux,default-trigger = "mmc0";
-				};
-				led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					label = "pm8058:green";
-					function = LED_FUNCTION_HEARTBEAT;
-					color = <LED_COLOR_ID_GREEN>;
-					default-state = "on";
-					linux,default-trigger = "heartbeat";
-				};
-			};
+&pm8058_gpio {
+	dragon_ethernet_gpios: ethernet-state {
+		pinconf {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_bmp085_gpios: bmp085-state {
+		pinconf {
+			pins = "gpio16";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_mpu3050_gpios: mpu3050-state {
+		pinconf {
+			pins = "gpio17";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc3_gpios: sdcc3-state {
+		pinconf {
+			pins = "gpio22";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc5_gpios: sdcc5-state {
+		pinconf {
+			pins = "gpio26";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_ak8975_gpios: ak8975-state {
+		pinconf {
+			pins = "gpio33";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_cm3605_gpios: cm3605-state {
+		/* Pin 34 connected to the proxy IRQ */
+		gpio34-pins {
+			pins = "gpio34";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+		/* Pin 35 connected to ASET */
+		gpio35-pins {
+			pins = "gpio35";
+			function = "normal";
+			output-high;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_veth_gpios: veth-state {
+		pinconf {
+			pins = "gpio40";
+			function = "normal";
+			bias-disable;
+			drive-push-pull;
 		};
+	};
+};
 
-		gsbi@16200000 {
-			qcom,mode = <GSBI_PROT_I2C>;
-			status = "okay";
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_MENU)
+		MATRIX_KEY(0, 2, KEY_1)
+		MATRIX_KEY(0, 3, KEY_4)
+		MATRIX_KEY(0, 4, KEY_7)
+		MATRIX_KEY(1, 0, KEY_UP)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_5)
+		MATRIX_KEY(1, 3, KEY_8)
+		MATRIX_KEY(2, 0, KEY_HOME)
+		MATRIX_KEY(2, 1, KEY_REPLY)
+		MATRIX_KEY(2, 2, KEY_2)
+		MATRIX_KEY(2, 3, KEY_6)
+		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(3, 1, KEY_RIGHT)
+		MATRIX_KEY(3, 2, KEY_3)
+		MATRIX_KEY(3, 3, KEY_9)
+		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(4, 1, KEY_BACK)
+		MATRIX_KEY(4, 2, KEY_CAMERA)
+		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+	>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
 
-			gsbi3_i2c: i2c@16280000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
-				status = "okay";
-
-				touchscreen@24 {
-					compatible = "cypress,cy8ctma340";
-					reg = <0x24>;
-					/* Certainly we can do at least 400 kHz */
-					clock-frequency = <400000>;
-					/* IRQ on GPIO61 called /CTP_INT */
-					interrupt-parent = <&tlmm>;
-					interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
-					/*
-					 * The I2C bus is using a PCA9306 level translator from L16A
-					 * to L2B so these two voltages are needed and L16A is
-					 * kind of the IO voltage, however L16Aisn't really fed to
-					 * the TMA340, which relies entirely on L2B (PM8901 L2).
-					 */
-					vcpin-supply = <&pm8058_l16>;
-					vdd-supply = <&pm8901_l2>;
-					/* GPIO58, called WAKE_CTP */
-					reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-					touchscreen-size-x = <480>;
-					touchscreen-size-y = <800>;
-					active-interval-ms = <0>;
-					touch-timeout-ms = <255>;
-					lowpower-interval-ms = <10>;
-					bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_tma340_gpios>;
-				};
-			};
+&pm8058_led48 {
+	/*
+	 * The keypad LED @0x48 is routed to
+	 * the sensor board where it is
+	 * connected to an infrared LED
+	 * SFH4650 (60mW, @850nm) next to the
+	 * ambient light and proximity sensor
+	 * Capella Microsystems CM3605.
+	 */
+	label = "pm8058:infrared:proximitysensor";
+	default-state = "off";
+	linux,default-trigger = "cm3605";
+	status = "okay";
+};
+
+&pm8058_led131 {
+	label = "pm8058:red";
+	color = <LED_COLOR_ID_RED>;
+	default-state = "off";
+	status = "okay";
+};
+
+&pm8058_led132 {
+	/*
+	 * This is actually green too on my
+	 * board, but documented as yellow.
+	 */
+	label = "pm8058:yellow";
+	color = <LED_COLOR_ID_YELLOW>;
+	default-state = "off";
+	linux,default-trigger = "mmc0";
+	status = "okay";
+};
+
+&pm8058_led133 {
+	label = "pm8058:green";
+	function = LED_FUNCTION_HEARTBEAT;
+	color = <LED_COLOR_ID_GREEN>;
+	default-state = "on";
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pm8058_mpps {
+	dragon_cm3605_mpps: cm3605-mpps-state {
+		mpp5 {
+			pins = "mpp5";
+			function = "analog";
+			input-enable;
+			bias-high-impedance;
+			/* Let's use channel 5 */
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+			power-source = <PM8058_GPIO_S3>;
 		};
+	};
+};
 
-		gsbi@19800000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&rpm {
+	/*
+	 * Set up of the PMIC RPM regulators for this board
+	 * PM8901 supplies "preliminary regulators" whatever
+	 * that means
+	 */
+	pm8901-regulators {
+		vdd_l0-supply = <&pm8901_s4>;
+		vdd_l1-supply = <&vph>;
+		vdd_l2-supply = <&vph>;
+		vdd_l3-supply = <&vph>;
+		vdd_l4-supply = <&vph>;
+		vdd_l5-supply = <&vph>;
+		vdd_l6-supply = <&vph>;
+		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		lvs0_in-supply = <&pm8058_s3>;
+		lvs1_in-supply = <&pm8901_s4>;
+		lvs2_in-supply = <&pm8058_l0>;
+		lvs3_in-supply = <&pm8058_s2>;
+		mvs_in-supply = <&pm8058_s3>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l2 {
+			/* TMA340 requires strictly 3.3V */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
 
-			i2c@19880000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-
-				eeprom@52 {
-					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					vcc-supply = <&pm8058_s3>;
-					pagesize = <64>;
-				};
-				wm8903: wm8903@1a {
-					/* This Woolfson Micro device has an unrouted interrupt line */
-					compatible = "wlf,wm8903";
-					reg = <0x1a>;
-
-					AVDD-supply = <&pm8058_l16>;
-					CPVDD-supply = <&pm8058_l16>;
-					DBVDD-supply = <&pm8058_s3>;
-					DCVDD-supply = <&pm8058_l0>;
-
-					gpio-controller;
-					#gpio-cells = <2>;
-
-					micdet-cfg = <0>;
-					micdet-delay = <100>;
-					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-				};
-			};
+		/* s0 and s1 are SAW regulators controlled over SPM */
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
 		};
 
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		/* LVS0 thru 3 and mvs are just switches */
+		lvs0 {
+			regulator-always-on;
+		};
+		lvs1 { };
+		lvs2 { };
+		lvs3 { };
+		mvs { };
 
-			serial@19c40000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-			};
+	};
 
-			i2c@19c80000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-
-				ak8975@c {
-					compatible = "asahi-kasei,ak8975";
-					reg = <0x0c>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_ak8975_gpios>;
-					vid-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-				};
-				bmp085@77 {
-					compatible = "bosch,bmp085";
-					reg = <0x77>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_bmp085_gpios>;
-					vddd-supply = <&pm8058_lvs0>; // 1.8V
-					vdda-supply = <&pm8058_l14>; // 2.85V
-				};
-				mpu3050@68 {
-					compatible = "invensense,mpu3050";
-					reg = <0x68>;
-					/*
-					 * GPIO17 is pulled high by a 10k
-					 * resistor to VLOGIC so needs to be
-					 * active low/falling edge.
-					 */
-					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_mpu3050_gpios>;
-					vlogic-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-
-					/*
-					 * The MPU-3050 acts as a hub for the
-					 * accelerometer.
-					 */
-					i2c-gate {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						kxsd9@18 {
-							compatible = "kionix,kxsd9";
-							reg = <0x18>;
-							interrupt-parent = <&tlmm>;
-							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-							pinctrl-names = "default";
-							pinctrl-0 = <&dragon_kxsd9_gpios>;
-							iovdd-supply = <&pm8058_lvs0>; // 1.8V
-							vdd-supply = <&pm8058_l14>; // 2.85V
-						};
-					};
-				};
-			};
+	pm8058-regulators {
+		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+		vdd_l2_l11_l12-supply = <&vph>;
+		vdd_l3_l4_l5-supply = <&vph>;
+		vdd_l6_l7-supply = <&vph>;
+		vdd_l8-supply = <&vph>;
+		vdd_l9-supply = <&vph>;
+		vdd_l10-supply = <&vph>;
+		vdd_l13_l16-supply = <&pm8058_s4>;
+		vdd_l14_l15-supply = <&vph>;
+		vdd_l17_l18-supply = <&vph>;
+		vdd_l19_l20-supply = <&vph>;
+		vdd_l21-supply = <&pm8058_s3>;
+		vdd_l22-supply = <&pm8058_s3>;
+		vdd_l23_l24_l25-supply = <&pm8058_s3>;
+		vdd_s0-supply = <&vph>;
+		vdd_s1-supply = <&vph>;
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		vdd_ncp-supply = <&vph>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3600000>;
+			bias-pull-down;
+		};
+		l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3050000>;
+			bias-pull-down;
+		};
+		l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l10 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l11 {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+		l12 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+		l13 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			bias-pull-down;
+		};
+		l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l17 {
+			// 1.5V according to schematic
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l18 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+		l19 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			bias-pull-down;
+		};
+		l20 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l21 {
+			// 1.1 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l22 {
+			// 1.2 V according to schematic
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+		l23 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l24 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
 		};
 
-		external-bus@1a100000 {
-			/* The EBI2 will instantiate first, then populate its children */
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_ebi2_pins>;
-
-			/*
-			 * An on-board SMSC LAN9221 chip for "debug ethernet",
-			 * which is actually just an ordinary ethernet on the
-			 * EBI2. This has a 25MHz chrystal next to it, so no
-			 * clocking is needed.
-			 */
-			ethernet@2,0 {
-				compatible = "smsc,lan9221", "smsc,lan9115";
-				reg = <2 0x0 0x100>;
-				/*
-				 * The second interrupt is the PME interrupt
-				 * for network wakeup, connected to the TLMM.
-				 */
-				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				vdd33a-supply = <&dragon_veth>;
-				vddvario-supply = <&dragon_vario>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_ethernet_gpios>;
-				phy-mode = "mii";
-				reg-io-width = <2>;
-				smsc,force-external-phy;
-				smsc,irq-push-pull;
-
-				/*
-				 * SLOW chipselect config
-				 * Delay 9 cycles (140ns@64MHz) between SMSC
-				 * LAN9221 Ethernet controller reads and writes
-				 * on CS2.
-				 */
-				qcom,xmem-recovery-cycles = <0>;
-				qcom,xmem-write-hold-cycles = <3>;
-				qcom,xmem-write-delta-cycles = <31>;
-				qcom,xmem-read-delta-cycles = <28>;
-				qcom,xmem-write-wait-cycles = <9>;
-				qcom,xmem-read-wait-cycles = <9>;
-			};
+		s0 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1325000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s1 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1250000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s2 {
+			// 1.3 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		rpm@104000 {
-			/*
-			 * Set up of the PMIC RPM regulators for this board
-			 * PM8901 supplies "preliminary regulators" whatever
-			 * that means
-			 */
-			pm8901-regulators {
-				vdd_l0-supply = <&pm8901_s4>;
-				vdd_l1-supply = <&vph>;
-				vdd_l2-supply = <&vph>;
-				vdd_l3-supply = <&vph>;
-				vdd_l4-supply = <&vph>;
-				vdd_l5-supply = <&vph>;
-				vdd_l6-supply = <&vph>;
-				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				lvs0_in-supply = <&pm8058_s3>;
-				lvs1_in-supply = <&pm8901_s4>;
-				lvs2_in-supply = <&pm8058_l0>;
-				lvs3_in-supply = <&pm8058_s2>;
-				mvs_in-supply = <&pm8058_s3>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l2 {
-					/* TMA340 requires strictly 3.3V */
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-
-				/* s0 and s1 are SAW regulators controlled over SPM */
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* LVS0 thru 3 and mvs are just switches */
-				lvs0 {
-					regulator-always-on;
-				};
-				lvs1 { };
-				lvs2 { };
-				lvs3 { };
-				mvs { };
+		/* LVS0 and LVS1 are just switches */
+		lvs0 {
+			bias-pull-down;
+		};
+		lvs1 {
+			bias-pull-down;
+		};
 
-			};
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
 
-			pm8058-regulators {
-				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-				vdd_l2_l11_l12-supply = <&vph>;
-				vdd_l3_l4_l5-supply = <&vph>;
-				vdd_l6_l7-supply = <&vph>;
-				vdd_l8-supply = <&vph>;
-				vdd_l9-supply = <&vph>;
-				vdd_l10-supply = <&vph>;
-				vdd_l13_l16-supply = <&pm8058_s4>;
-				vdd_l14_l15-supply = <&vph>;
-				vdd_l17_l18-supply = <&vph>;
-				vdd_l19_l20-supply = <&vph>;
-				vdd_l21-supply = <&pm8058_s3>;
-				vdd_l22-supply = <&pm8058_s3>;
-				vdd_l23_l24_l25-supply = <&pm8058_s3>;
-				vdd_s0-supply = <&vph>;
-				vdd_s1-supply = <&vph>;
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				vdd_ncp-supply = <&vph>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
-				};
-				l7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l8 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <3050000>;
-					bias-pull-down;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l10 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l11 {
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					bias-pull-down;
-				};
-				l12 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-				l13 {
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					bias-pull-down;
-				};
-				l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-				l15 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l16 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l17 {
-					// 1.5V according to schematic
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l18 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-				l19 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					bias-pull-down;
-				};
-				l20 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l21 {
-					// 1.1 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l22 {
-					// 1.2 V according to schematic
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-				l23 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l24 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				s0 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1325000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s1 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1250000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s2 {
-					// 1.3 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				/* LVS0 and LVS1 are just switches */
-				lvs0 {
-					bias-pull-down;
-				};
-				lvs1 {
-					bias-pull-down;
-				};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
+/* Internal 3.69 GiB eMMC */
+&sdcc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc1_pins>;
+	vmmc-supply = <&pm8901_l5>;
+	vqmmc-supply = <&pm8901_lvs0>;
+	status = "okay";
+};
+
+/* External micro SD card, directly connected, pulled up to 2.85 V */
+&sdcc3 {
+	/* Enable SSBI GPIO 22 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	status = "okay";
+};
+
+/*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+&sdcc5 {
+	/* Enable SSBI GPIO 26 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	vqmmc-supply = <&dragon_vio_txb>;
+	status = "okay";
+};
+
+&tlmm {
+	/* eMMC pins, all 8 data lines connected */
+	dragon_sdcc1_pins: sdcc1-state {
+		clk-pins {
+			pins = "gpio167"; /* SDC1 CLK */
+			function = "sdc1";
+			drive-strength = <16>;
+			bias-disable;
 		};
-		amba {
-			/* Internal 3.69 GiB eMMC */
-			mmc@12400000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc1_pins>;
-				vmmc-supply = <&pm8901_l5>;
-				vqmmc-supply = <&pm8901_lvs0>;
-			};
+		cmd-pins {
+			pins = "gpio168"; /* SDC1 CMD */
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC1 D0 to D7 */
+			pins = "gpio159", "gpio160", "gpio161", "gpio162",
+			     "gpio163", "gpio164", "gpio165", "gpio166";
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
 
-			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			mmc@12180000 {
-				status = "okay";
-				/* Enable SSBI GPIO 22 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-			};
+	/*
+	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+	 * configuration.
+	 */
+	dragon_sdcc3_pins: sdcc3-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
 
-			/*
-			 * Second external micro SD card, using two TXB104RGYR levelshifters
-			 * to lift from 1.8 V to 2.85 V
-			 */
-			mmc@12200000 {
-				status = "okay";
-				/* Enable SSBI GPIO 26 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-				vqmmc-supply = <&dragon_vio_txb>;
-			};
+	/* Second SD card slot pins */
+	dragon_sdcc5_pins: sdcc5-state {
+		clk-pins {
+			pins = "gpio97"; /* SDC5 CLK */
+			function = "sdc5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio95"; /* SDC5 CMD */
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC5 D0 to D3 */
+			pins = "gpio96", "gpio98", "gpio99", "gpio100";
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
 		};
 	};
+
+	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+		pins = "gpio43", "gpio44";
+		function = "gsbi3";
+		drive-strength = <8>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+		pins = "gpio64", "gpio65";
+		function = "gsbi8";
+		drive-strength = <16>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+		pins = "gpio115", "gpio116";
+		function = "gsbi12";
+		drive-strength = <16>;
+		/* These have external pull-up 4.7kOhm to 1.8V */
+		bias-disable;
+	};
+
+	/* Primary serial port uart 0 pins */
+	dragon_gsbi12_serial_pins: gsbi12-serial-state {
+		tx-pins {
+			pins = "gpio117";
+			function = "gsbi12";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		rx-pins {
+			pins = "gpio118";
+			function = "gsbi12";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_ebi2_pins: ebi2-state {
+		/*
+		 * Pins used by EBI2 on the Dragonboard, actually only
+		 * CS2 is used by a real peripheral. CS0 is just
+		 * routed to a test point.
+		 */
+		mux0-pins {
+			pins =
+			    /* "gpio39", CS1A_N this is not good to mux */
+			    "gpio40", /* CS2A_N */
+			    "gpio134"; /* CS0_N testpoint TP29 */
+			function = "ebi2cs";
+		};
+		mux1-pins {
+			pins =
+			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+			    "gpio123", "gpio124", "gpio125", "gpio126",
+			    "gpio127", "gpio128", "gpio129", "gpio130",
+			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+			    "gpio135", "gpio136", "gpio137", "gpio138",
+			    "gpio139", "gpio140", "gpio141", "gpio142",
+			    "gpio143", "gpio144", "gpio145", "gpio146",
+			    "gpio147", "gpio148", "gpio149", "gpio150",
+			    "gpio151", /* EBI2_OE_N */
+			    "gpio153", /* EBI2_ADV */
+			    "gpio157"; /* EBI2_WE_N */
+			function = "ebi2";
+		};
+	};
+
+	/* Interrupt line for the KXSD9 accelerometer */
+	dragon_kxsd9_gpios: kxsd9-state {
+		pins = "gpio57"; /* IRQ line */
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	dragon_tma340_gpios: tma340-state {
+		reset-pins {
+			/* RESET line, TS_ATTN, WAKE_CTP */
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio61"; /* IRQ line */
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&xoadc {
+	/* Reference voltage 2.2 V */
+	xoadc-ref-supply = <&pm8058_l18>;
+
+	/* Board-specific channels */
+	mpp5@5 {
+		/* Connected to AOUT of ALS sensor */
+		reg = <0x00 0x05>;
+	};
+	mpp6@6 {
+		/* Connected to test point TP43 */
+		reg = <0x00 0x06>;
+	};
+	mpp7@7 {
+		/* Connected to battery thermistor */
+		reg = <0x00 0x07>;
+	};
+	mpp8@8 {
+		/* Connected to battery ID detector */
+		reg = <0x00 0x08>;
+	};
+	mpp9@9 {
+		/* Connected to XO thermistor */
+		reg = <0x00 0x09>;
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index fee278e32cb6..bf2fb0f70fe4 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -6,6 +6,7 @@
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -30,7 +31,7 @@
 		};
 	};
 
-	ext_3p3v: regulator-fixed@1 {
+	ext_3p3v: regulator-ext-3p3v {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -57,302 +58,291 @@
 	};
 
 	soc {
-		rpm@108000 {
-			regulators {
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vin_lvs2-supply = <&pm8921_s1>;
-
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				vdd_ncp-supply = <&pm8921_l6>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				/* msm otg HSUSB_VDDCX */
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				/*
-				 * msm_sdcc.1-sdc-vdd_io
-				 * tabla2x-slim-CDC_VDDA_RX
-				 * tabla2x-slim-CDC_VDDA_TX
-				 * tabla2x-slim-CDC_VDD_CP
-				 * tabla2x-slim-VDDIO_CDC
-				 */
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-					regulator-always-on;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				/* mipi_dsi.1-dsi1_pll_vdda */
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* msm_otg-HSUSB_3p3 */
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				/* msm_otg-HSUSB_1p8 */
-				l4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/* msm_sdcc.1-sdc_vdd */
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				/* mipi_dsi.1-dsi1_avdd */
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-
-				/* pwm_power for backlight */
-				l17 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				/* camera, qdsp6 */
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/*
-				 * tabla2x-slim-CDC_VDDA_A_1P2V
-				 * tabla2x-slim-VDDD_CDC_D
-				 */
-				l25 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-				/*
-				 * mipi_dsi.1-dsi1_vddio
-				 * pil_riva-pll_vdd
-				 */
-				lvs7 {
-					bias-pull-down;
-				};
-			};
-		};
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
 
-		mdp@5100000 {
-			status = "okay";
-			ports {
-				port@1 {
-					mdp_dsi1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
 			};
 		};
+	};
+};
 
-		dsi0: dsi@4700000 {
-			status = "okay";
-			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-			vdd-supply = <&pm8921_l8>;
-			vddio-supply = <&pm8921_lvs7>;
-			avdd-supply = <&pm8921_l11>;
-
-			panel@0 {
-				reg = <0>;
-				compatible = "jdi,lt070me05000";
-
-				vddp-supply = <&pm8921_l17>;
-				iovcc-supply = <&pm8921_lvs7>;
-
-				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-			ports {
-				port@0 {
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp_dsi1_out>;
-					};
-				};
-
-				port@1 {
-					dsi0_out: endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
+&dsi0 {
+	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+	vdd-supply = <&pm8921_l8>;
+	vddio-supply = <&pm8921_lvs7>;
+	avdd-supply = <&pm8921_l11>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "jdi,lt070me05000";
+
+		vddp-supply = <&pm8921_l17>;
+		iovcc-supply = <&pm8921_lvs7>;
+
+		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
+	};
+};
+
+&dsi0_in {
+	remote-endpoint = <&mdp_dsi1_out>;
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+
+	bq27541@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	trackpad@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
 
-		dsi-phy@4700200 {
-			status = "okay";
-			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&mdp_dsi1_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&rpm {
+	regulators {
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vin_lvs2-supply = <&pm8921_s1>;
+
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		vdd_ncp-supply = <&pm8921_l6>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
-
-				trackpad@10 {
-					compatible = "elan,ekth3500";
-					reg = <0x10>;
-					interrupt-parent = <&tlmm_pinmux>;
-					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-				};
-			};
+		/* msm otg HSUSB_VDDCX */
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+			regulator-always-on;
+		};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
+		/* msm_otg-HSUSB_3p3 */
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
 
-				bq27541@55 {
-					compatible = "ti,bq27541";
-					reg = <0x55>;
-				};
+		/* msm_otg-HSUSB_1p8 */
+		l4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
 
-			};
+		/* msm_sdcc.1-sdc_vdd */
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-			serial@16540000 {
-				status = "okay";
+		/* mipi_dsi.1-dsi1_avdd */
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+		/* pwm_power for backlight */
+		l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
 		};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-			};
+		/* camera, qdsp6 */
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		lvs1 {
+			bias-pull-down;
 		};
 
-		sram@2a03f000 {
-			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
+		lvs4 {
+			bias-pull-down;
+		};
 
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
+		lvs5 {
+			bias-pull-down;
+		};
 
-				mode-normal = <0x77665501>;
-				mode-bootloader = <0x77665500>;
-				mode-recovery = <0x77665502>;
-			};
+		lvs6 {
+			bias-pull-down;
+		};
+		/*
+		 * mipi_dsi.1-dsi1_vddio
+		 * pil_riva-pll_vdd
+		 */
+		lvs7 {
+			bias-pull-down;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 529629a0a9dc..d6ecfd8addb7 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -15,232 +15,216 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	/* on board fixed 3.3v supply */
+	v3p3_fixed: regulator-v3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE V3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-				eeprom@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <32>;
-				};
-			};
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&pcie {
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&v3p3_fixed>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
+
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		/* on board fixed 3.3v supply */
-		v3p3_fixed: v3p3 {
-			compatible = "regulator-fixed";
-			regulator-name = "PCIE V3P3";
-			regulator-min-microvolt = <3300000>;
+		l3 {
+			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&v3p3_fixed>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		lvs6 {
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				vqmmc-supply = <&v3p3_fixed>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&v3p3_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	status = "okay";
+	vmmc-supply = <&v3p3_fixed>;
+	vqmmc-supply = <&v3p3_fixed>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+};
+
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7f90217661b..96307550523a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -22,23 +22,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&notify_led>;
 
-		led@1 {
+		led-user1 {
 			label = "apq8064:green:user1";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
@@ -57,326 +46,314 @@
 		};
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
 
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		ext_3p3v: regulator-fixed@1 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "ext_3p3v";
-			regulator-type = "voltage";
-			startup-delay-us = <0>;
-			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-		gsbi3: gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-			};
-		};
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
 
-		gsbi@16300000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			/* CAM I2C MIPI-CSI connector */
-			i2c@16380000 {
-				status = "okay";
-			};
-		};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+	status = "okay";
+};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-		};
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+};
 
-		gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-			spi4: spi@1a280000 {
-				status = "okay";
-				num-cs = <1>;
-				cs-gpios = <&tlmm_pinmux 53 0>;
-			};
-		};
+&gsbi5_spi {
+	num-cs = <1>;
+	cs-gpios = <&tlmm_pinmux 53 0>;
+	status = "okay";
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_UART_W_FC>;
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
 
-			serial@16540000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&hdmi {
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&hdmi_in {
+	remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+	status = "okay";
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dtv_out {
+	remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+	status = "okay";
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&ext_3p3v>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+	notify_led: nled-state {
+		pinconf {
+			pins = "gpio18";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
 
-		sata_phy0: phy@1b400000 {
-			status = "okay";
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		sata0: sata@29000000 {
-			status = "okay";
-			target-supply = <&pm8921_s4>;
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&ext_3p3v>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-
-					notify_led: nled-state {
-						pinconf {
-							pins = "gpio18";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
 
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&ext_3p3v>;
-				vqmmc-supply = <&pm8921_lvs1>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
 		};
 
-		hdmi-tx@4a00000 {
-			status = "okay";
+		lvs1 {
+			bias-pull-down;
+		};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
+		lvs6 {
+			bias-pull-down;
+		};
+	};
+};
 
-			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+&sata_phy0 {
+	status = "okay";
+};
 
-			ports {
-				port@0 {
-					endpoint {
-						remote-endpoint = <&mdp_dtv_out>;
-					};
-				};
+&sata0 {
+	target-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-				port@1 {
-					endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-		hdmi-phy@4a00400 {
-			status = "okay";
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-		};
+/* WLAN */
+&sdcc4 {
+	vmmc-supply = <&ext_3p3v>;
+	vqmmc-supply = <&pm8921_lvs1>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+	status = "okay";
+};
 
-		mdp@5100000 {
-			status = "okay";
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
 
-			ports {
-				port@3 {
-					endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-			};
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index c07c5474750d..9244512b74d1 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &gsbi5_serial;
@@ -51,351 +52,338 @@
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi5_uart_pin_a>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio3", "gpio4", "gpio29", "gpio35";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		input-enable;
+		power-source = <2>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		qcom,pull-up-strength = <0>;
+	};
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs_1_3_6-supply = <&pm8921_s4>;
+		vin_lvs_4_5_7-supply = <&pm8921_s4>;
+		vin_ncp-supply = <&pm8921_l6>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_l24-supply = <&pm8921_s1>;
+		vin_l25-supply = <&pm8921_s1>;
+		vin_l27-supply = <&pm8921_s7>;
+		vin_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* PMOS LDO */
+		l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
 
-	soc {
-		pinctrl@800000 {
-			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-				rx {
-					pins = "gpio52";
-					function = "gsbi5";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio51";
-					function = "gsbi5";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-
-			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-				pins = "gpio26";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-
-		rpm@108000 {
-			regulators {
-				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs_1_3_6-supply = <&pm8921_s4>;
-				vin_lvs_4_5_7-supply = <&pm8921_s4>;
-				vin_ncp-supply = <&pm8921_l6>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_l24-supply = <&pm8921_s1>;
-				vin_l25-supply = <&pm8921_s1>;
-				vin_l27-supply = <&pm8921_s7>;
-				vin_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s8 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-
-				/* PMOS LDO */
-				l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					bias-pull-down;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l10 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l17 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				l18 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l22 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				l27 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l29 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs2 {
-					bias-pull-down;
-				};
-
-				lvs3 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-
-				lvs7 {
-					bias-pull-down;
-				};
-
-				usb-switch {};
-
-				hdmi-switch {};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-active-state {
-						pins = "gpio3", "gpio4", "gpio29", "gpio35";
-						function = "normal";
-
-						bias-pull-up;
-						drive-push-pull;
-						input-enable;
-						power-source = <2>;
-						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-						qcom,pull-up-strength = <0>;
-					};
-				};
-			};
-		};
-
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
 		};
 
-		gsbi@1a200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
 
-			serial@1a240000 {
-				status = "okay";
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi5_uart_pin_a>;
-			};
+		l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		amba {
-			sdcc1: mmc@12400000 {
-				status = "okay";
+		l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
 
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
 
-			sdcc3: mmc@12180000 {
-				status = "okay";
+		l17 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
 
-				vmmc-supply = <&pm8921_l6>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+		l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-			};
+		l21 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
 		};
 
-		riva-pil@3204000 {
-			status = "okay";
+		l22 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l29 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs2 {
+			bias-pull-down;
+		};
+
+		lvs3 {
+			bias-pull-down;
+		};
+
+		lvs4 {
+			bias-pull-down;
+		};
+
+		lvs5 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+
+		lvs7 {
+			bias-pull-down;
+		};
+
+		usb-switch {};
+
+		hdmi-switch {};
+
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
 		};
 	};
 };
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+		rx {
+			pins = "gpio52";
+			function = "gsbi5";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		tx {
+			pins = "gpio51";
+			function = "gsbi5";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+		pins = "gpio26";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355..0da9623ea084 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -672,7 +672,7 @@
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8821: pmic@1 {
+			pm8821: pmic {
 				compatible = "qcom,pm8821";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
@@ -693,12 +693,12 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <74 8>;
@@ -884,7 +884,7 @@
 			reg = <0x2011000 0x1000>;
 		};
 
-		rpm@108000 {
+		rpm: rpm@108000 {
 			compatible = "qcom,rpm-apq8064";
 			reg = <0x108000 0x1000>;
 			qcom,ipc = <&l2cc 0x8 2>;
@@ -1085,15 +1085,21 @@
 			ports-implemented = <0x1>;
 		};
 
-		/* Temporary fixed regulator */
-		sdcc1bam: dma-controller@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
 		};
 
 		sdcc3bam: dma-controller@12182000{
@@ -1106,6 +1112,24 @@
 			qcom,ee = <0>;
 		};
 
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_gpios>;
+		};
+
 		sdcc4bam: dma-controller@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
@@ -1116,67 +1140,33 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_pins>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
 
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x2000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
+		sdcc1bam: dma-controller@12402000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -1316,7 +1306,6 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
-			phy-names = "dsi";
 			status = "disabled";
 
 			ports {
@@ -1338,7 +1327,7 @@
 		};
 
 
-		dsi0_phy: dsi-phy@4700200 {
+		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -1470,6 +1459,8 @@
 
 			phys = <&hdmi_phy>;
 
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1488,7 +1479,7 @@
 			};
 		};
 
-		hdmi_phy: hdmi-phy@4a00400 {
+		hdmi_phy: phy@4a00400 {
 			compatible = "qcom,hdmi-phy-8960";
 			reg = <0x4a00400 0x60>,
 			      <0x4a00500 0x100>;
@@ -1498,6 +1489,8 @@
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
 			clock-names = "slave_iface";
 			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		mdp: mdp@5100000 {
@@ -1552,7 +1545,7 @@
 			};
 		};
 
-		riva: riva-pil@3204000 {
+		riva: riva-pil@3200800 {
 			compatible = "qcom,riva-pil";
 
 			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
@@ -1615,7 +1608,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 91716298ec5e..1345df7cbd00 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -35,30 +35,8 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs2_phy>;
-	phy-select = <&tcsr 0xb000 1>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@b {
-			status = "okay";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
-
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -82,7 +60,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -272,34 +250,34 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -307,3 +285,23 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs2_phy {
+	status = "okay";
+	v3p3-supply = <&pm8941_l24>;
+	v1p8-supply = <&pm8941_l6>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index f2fb7c975af8..fe30abfff90a 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -72,7 +72,7 @@
 		};
 
 		L2: l2-cache {
-			compatible = "qcom,arch-cache";
+			compatible = "cache";
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
@@ -258,12 +258,14 @@
 		};
 
 		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens";
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
 			reg = <0xfc4a9000 0x1000>, /* TM */
 			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 		timer@f9020000 {
@@ -394,7 +396,7 @@
 			#hwlock-cells = <1>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -474,7 +476,7 @@
 				compatible = "qcom,rpm-apq8084";
 				qcom,smd-channels = "rpm_requests";
 
-				pma8084-regulators {
+				regulators-0 {
 					compatible = "qcom,rpm-pma8084-regulators";
 
 					pma8084_s1: s1 {};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index cf7da1ab177c..1b27edce9d4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -9,7 +9,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ap120c-ac:green:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@
 			default-state = "on";
 		};
 
-		wlan {
+		led-wlan {
 			label = "ap120c-ac:green:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		support {
+		led-support {
 			label = "ap120c-ac:green:support";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index c4f89b712fd9..a707057c887d 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -7,7 +7,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status: status {
+		status: led-status {
 			label = "ap120c-ac:blue:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@
 			default-state = "keep";
 		};
 
-		wlan2g {
+		led-wlan2g {
 			label = "ap120c-ac:green:wlan2g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@
 			linux,default-trigger = "phy0tpt";
 		};
 
-		wlan5g {
+		led-wlan5g {
 			label = "ap120c-ac:red:wlan5g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_RED>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index af9a26fb5d4a..a5a6f3ebb274 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
+	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
 
 	keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
index 394412619894..365fbac417fd 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
+	compatible = "8dev,jalapeno", "qcom,ipq4018";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b23591110bd2..acb08dcf9442 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -348,7 +348,7 @@
 		saw0: regulator@b089000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
+			regulator;
 		};
 
 		saw1: regulator@b099000 {
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 5a65cce2500c..f908889c4f95 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011";
+	compatible = "mikrotik,rb3011", "qcom,ipq8064";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -264,8 +264,7 @@
 &nand {
 	status = "okay";
 
-	nandcs@0 {
-		compatible = "qcom,nandcs";
+	nand@0 {
 		reg = <0>;
 
 		nand-ecc-strength = <4>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680a..7e784b0995da 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -513,8 +513,8 @@
 
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-ipq8064", "syscon";
-			clocks = <&pxo_board>, <&cxo_board>;
-			clock-names = "pxo", "cxo";
+			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+			clock-names = "pxo", "cxo", "pll4";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -728,7 +728,6 @@
 				status = "disabled";
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -748,7 +747,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -756,7 +754,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				mmc-ddr-1_8v;
 				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 0827de5426c1..a8304769b509 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for mangOH Green Board with WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
@@ -82,8 +45,8 @@
 	 * - 42: IOT0_GPIO1 and SD Card Detect
 	 */
 
-	gpioext1_pins: gpioext1_pins {
-		pins {
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
 			pins = "gpio2";
 			function = "gpio";
 			input-enable;
@@ -91,8 +54,8 @@
 		};
 	};
 
-	sdc_cd_pins: sdc_cd_pins {
-		pins {
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
 			pins = "gpio42";
 			function = "gpio";
 			drive-strength = <2>;
@@ -153,7 +116,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			gpioext0: gpio@3e {
+			gpioext0: pinctrl@3e {
 				/* GPIO Expander 0 Mapping :
 				 * - 0: ARDUINO_RESET_Level shift
 				 * - 1: BattChrgr_PG_N
@@ -179,7 +142,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -191,7 +154,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			gpioext1: gpio@3f {
+			gpioext1: pinctrl@3f {
 				/* GPIO Expander 1 Mapping :
 				 * - 0: GPIOEXP_INT1
 				 * - 1: Battery detect
@@ -220,7 +183,7 @@
 				interrupt-parent = <&msmgpio>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -232,7 +195,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			gpioext2: gpio@70 {
+			gpioext2: pinctrl@70 {
 				/* GPIO Expander 2 Mapping :
 				 * - 0: USB_HUB_INTn
 				 * - 1: HUB_CONNECT
@@ -258,7 +221,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 49de1821ac3a..92c8003dac25 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Sierra Wireless WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "qcom-mdm9615.dtsi"
@@ -59,8 +22,8 @@
 	pinctrl-0 = <&reset_out_pins>;
 	pinctrl-names = "default";
 
-	gsbi3_pins: gsbi3_pins {
-		mux {
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
 			pins = "gpio8", "gpio9", "gpio10", "gpio11";
 			function = "gsbi3";
 			drive-strength = <8>;
@@ -68,8 +31,8 @@
 		};
 	};
 
-	gsbi4_pins: gsbi4_pins {
-		mux {
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
 			pins = "gpio12", "gpio13", "gpio14", "gpio15";
 			function = "gsbi4";
 			drive-strength = <8>;
@@ -77,15 +40,15 @@
 		};
 	};
 
-	gsbi5_i2c_pins: gsbi5_i2c_pins {
-		pin16 {
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
 			pins = "gpio16";
 			function = "gsbi5_i2c";
 			drive-strength = <8>;
 			bias-disable;
 		};
 
-		pin17 {
+		scl-pins {
 			pins = "gpio17";
 			function = "gsbi5_i2c";
 			drive-strength = <2>;
@@ -93,8 +56,8 @@
 		};
 	};
 
-	gsbi5_uart_pins: gsbi5_uart_pins {
-		mux {
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
 			pins = "gpio18", "gpio19";
 			function = "gsbi5_uart";
 			drive-strength = <8>;
@@ -102,8 +65,8 @@
 		};
 	};
 
-	reset_out_pins: reset_out_pins {
-		pins {
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
 			pins = "gpio66";
 			function = "gpio";
 			drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index b47c86412de2..b0fe1d95d88f 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Qualcomm MDM9615 SoC
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -64,6 +27,7 @@
 
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a5";
+			reg = <0>;
 			device_type = "cpu";
 			next-level-cache = <&L2>;
 		};
@@ -206,7 +170,6 @@
 				#size-cells = <0>;
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
 
 				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
@@ -283,7 +246,7 @@
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -351,51 +314,43 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12180000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC1_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc1: mmc@12180000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <48000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC1_CLK>;
+			assigned-clock-rates = <400000>;
+		};
 
-			sdcc2: mmc@12140000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12140000 0x2000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC2_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc2: mmc@12140000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC2_CLK>;
+			assigned-clock-rates = <400000>;
 		};
 
 		tcsr: syscon@1a400000 {
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
index 290e1df631f0..6a082ad4418a 100644
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Samsung Galaxy S III Neo";
 	compatible = "samsung,s3ve3g", "qcom,msm8226";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart3;
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index cf2d56929428..4cba25dad8d6 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
@@ -298,6 +299,33 @@
 			#size-cells = <0>;
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
@@ -344,6 +372,14 @@
 			#power-domain-cells = <1>;
 		};
 
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,msm8226-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -354,49 +390,65 @@
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			blsp1_i2c1_pins: blsp1-i2c1 {
+			blsp1_i2c1_pins: blsp1-i2c1-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_pins: blsp1-i2c2 {
+			blsp1_i2c2_pins: blsp1-i2c2-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_pins: blsp1-i2c3 {
+			blsp1_i2c3_pins: blsp1-i2c3-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_pins: blsp1-i2c4 {
+			blsp1_i2c4_pins: blsp1-i2c4-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_pins: blsp1-i2c5 {
+			blsp1_i2c5_pins: blsp1-i2c5-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdhc1_default_state: sdhc1-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc1_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc1_cmd", "sdc1_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -404,13 +456,13 @@
 			};
 
 			sdhc2_default_state: sdhc2-default-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <10>;
 					bias-disable;
 				};
 
-				cmd-data {
+				cmd-data-pins {
 					pins = "sdc2_cmd", "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -418,21 +470,21 @@
 			};
 
 			sdhc3_default_state: sdhc3-default-state {
-				clk {
+				clk-pins {
 					pins = "gpio44";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "gpio43";
 					function = "sdc3";
 					drive-strength = <8>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio39", "gpio40", "gpio41", "gpio42";
 					function = "sdc3";
 					drive-strength = <8>;
@@ -527,7 +579,7 @@
 			};
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ddce7d64ba99..86f76d0feff4 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -316,7 +316,7 @@
 			};
 		};
 
-		external-bus@1a100000 {
+		ebi2: external-bus@1a100000 {
 			compatible = "qcom,msm8660-ebi2";
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -333,12 +333,12 @@
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8058: pmic@0 {
+			pm8058: pmic {
 				compatible = "qcom,pm8058";
 				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
@@ -379,7 +379,7 @@
 					pull-up;
 				};
 
-				keypad@148 {
+				pm8058_keypad: keypad@148 {
 					compatible = "qcom,pm8058-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pm8058>;
@@ -444,6 +444,31 @@
 					compatible = "qcom,pm8058-vib";
 					reg = <0x4a>;
 				};
+
+				pm8058_led48: led@48 {
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					status = "disabled";
+				};
+
+				pm8058_led131: led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					status = "disabled";
+				};
+
+				pm8058_led132: led@132 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					status = "disabled";
+				};
+
+				pm8058_led133: led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					status = "disabled";
+				};
+
 			};
 		};
 
@@ -471,7 +496,7 @@
 				clock-names = "pxo";
 			};
 
-			pm8901-regulators {
+			regulators-0 {
 				compatible = "qcom,rpm-pm8901-regulators";
 
 				pm8901_l0: l0 {};
@@ -495,7 +520,7 @@
 				pm8901_mvs: mvs {};
 			};
 
-			pm8058-regulators {
+			regulators-1 {
 				compatible = "qcom,rpm-pm8058-regulators";
 
 				pm8058_l0: l0 {};
@@ -549,7 +574,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x8000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -565,7 +589,6 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12140000 0x8000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -580,7 +603,6 @@
 				status = "disabled";
 				reg = <0x12180000 0x8000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -596,7 +618,6 @@
 				status = "disabled";
 				reg = <0x121c0000 0x8000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -611,7 +632,6 @@
 				status = "disabled";
 				reg = <0x12200000 0x8000>;
 				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 9157e3c4f48f..8fa2befa629a 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -18,7 +18,7 @@
 	regulators {
 		compatible = "simple-bus";
 
-		ext_l2: gpio-regulator@91 {
+		ext_l2: gpio-regulator {
 			compatible = "regulator-fixed";
 			regulator-name = "ext_l2";
 			gpio = <&msmgpio 91 0>;
@@ -42,7 +42,7 @@
 		compatible = "micrel,ks8851";
 		reg = <0>;
 		interrupt-parent = <&msmgpio>;
-		interrupts = <90 8>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <5400000>;
 		vdd-supply = <&ext_l2>;
 		vdd-io-supply = <&pm8921_lvs6>;
@@ -60,33 +60,32 @@
 };
 
 &msmgpio {
-	spi1_default: spi1_default {
-		 mux {
-			pins = "gpio6", "gpio7", "gpio9";
-			function = "gsbi1";
-		 };
-
-		 mosi {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
 			pins = "gpio6";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 miso {
+		 miso-pins {
 			pins = "gpio7";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 cs {
+		 cs-pins {
 			pins = "gpio8";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 			output-low;
 		 };
 
-		 clk {
+		 clk-pins {
 			pins = "gpio9";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index c5740da3754c..7debf9db7cb1 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -17,7 +17,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
+		interrupts = <GIC_PPI 14 0x304>;
 
 		cpu@0 {
 			compatible = "qcom,krait";
@@ -52,7 +52,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 0x304>;
 		qcom,no-pc-write;
 	};
 
@@ -105,9 +105,9 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-timer",
 				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>,
 					  <32768>;
@@ -119,7 +119,7 @@
 			gpio-controller;
 			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x800000 0x4000>;
@@ -247,15 +247,15 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&msmgpio>;
-				interrupts = <104 8>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -265,7 +265,8 @@
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
@@ -274,7 +275,8 @@
 					compatible = "qcom,pm8921-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <74 1>, <75 1>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15>;
 					scan-delay = <32>;
 					row-hold = <91500>;
@@ -283,7 +285,7 @@
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
 					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
@@ -297,44 +299,36 @@
 			clock-names = "core";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x8000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x8000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
 
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x8000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x8000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
 		};
 
 		tcsr: syscon@1a400000 {
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 6daceaa87802..280e63e3ebf2 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -9,6 +9,7 @@
 / {
 	model = "LGE MSM 8974 HAMMERHEAD";
 	compatible = "lge,hammerhead", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart1;
@@ -247,31 +248,6 @@
 	status = "okay";
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	extcon = <&charger>, <&usb_id>;
-	vbus-supply = <&usb_otg_vbus>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";
@@ -344,7 +320,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -368,7 +344,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -573,43 +549,43 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	mpu6515_pin: mpu6515 {
+	mpu6515_pin: mpu6515-state {
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
 		input-enable;
 	};
 
-	touch_pin: touch {
-		int {
+	touch_pin: touch-state {
+		int-pins {
 			pins = "gpio5";
 			function = "gpio";
 
@@ -618,7 +594,7 @@
 			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio8";
 			function = "gpio";
 
@@ -627,27 +603,50 @@
 		};
 	};
 
-	panel_pin: panel {
+	panel_pin: panel-state {
 		pins = "gpio12";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	bt_pin: bt {
-		hostwake {
+	bt_pin: bt-state {
+		hostwake-pins {
 			pins = "gpio42";
 			function = "gpio";
 		};
 
-		devwake {
+		devwake-pins {
 			pins = "gpio62";
 			function = "gpio";
 		};
 
-		shutdown {
+		shutdown-pins {
 			pins = "gpio41";
 			function = "gpio";
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
index 68d5626bf491..9f2ab5c122d0 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -4,6 +4,7 @@
 / {
 	model = "Sony Xperia Z1 Compact";
 	compatible = "sony,xperia-amami", "qcom,msm8974";
+	chassis-type = "handset";
 };
 
 &smbb {
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
index ea6a941d8f8c..9028f17e5c4a 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -4,4 +4,5 @@
 / {
 	model = "Sony Xperia Z1";
 	compatible = "sony,xperia-honami", "qcom,msm8974";
+	chassis-type = "handset";
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 5a70683d9103..1b683690a1ad 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -132,31 +132,6 @@
 	/* sii8334 MHL HDMI bridge */
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_coincell {
 	status = "okay";
 	qcom,rset-ohms = <2100>;
@@ -178,7 +153,7 @@
 
 	qcom,power-source = <1>;
 
-	rgb-led {
+	multi-led {
 		color = <LED_COLOR_ID_RGB>;
 		function = LED_FUNCTION_STATUS;
 
@@ -214,7 +189,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -238,7 +213,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -442,7 +417,7 @@
 };
 
 &tlmm {
-	ts_int_pin: touch-int {
+	ts_int_pin: touch-int-state {
 		pins = "gpio61";
 		function = "gpio";
 		drive-strength = <2>;
@@ -450,34 +425,34 @@
 		input-enable;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc-on {
-		clk {
+	sdc2_on: sdc-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -485,3 +460,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 7a9be0acf3f5..8d216a3c0851 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -653,7 +653,7 @@
 			#size-cells = <0>;
 		};
 
-		otg: usb@f9a55000 {
+		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
 			      <0xf9a55200 0x200>;
@@ -679,7 +679,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -690,7 +690,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -1056,7 +1056,7 @@
 			reg = <0xfc400000 0x4000>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -1116,7 +1116,7 @@
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens";
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
 			reg = <0xfc4a9000 0x1000>, /* TM */
 			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
@@ -1194,7 +1194,7 @@
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
 
-			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
 
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
@@ -1233,13 +1233,14 @@
 			};
 		};
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
 			reg = <0xfd484000 0x2000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@fd4a0000 {
-			compatible = "syscon";
+			compatible = "qcom,tcsr-msm8974", "syscon";
 			reg = <0xfd4a0000 0x10000>;
 		};
 
@@ -1253,61 +1254,62 @@
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			sdc1_off: sdc1-off {
-				clk {
+			sdc1_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
+			sdc2_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				cd {
+				cd-pins {
 					pins = "gpio54";
+					function = "gpio";
 					bias-disable;
 					drive-strength = <2>;
 				};
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				rx {
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
 					pins = "gpio5";
 					function = "blsp_uart2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				tx {
+				tx-pins {
 					pins = "gpio4";
 					function = "blsp_uart2";
 					drive-strength = <4>;
@@ -1315,15 +1317,15 @@
 				};
 			};
 
-			blsp2_uart1_default: blsp2-uart1-default {
-				tx-rts {
+			blsp2_uart1_default: blsp2-uart1-default-state {
+				tx-rts-pins {
 					pins = "gpio41", "gpio44";
 					function = "blsp_uart7";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx-cts {
+				rx-cts-pins {
 					pins = "gpio42", "gpio43";
 					function = "blsp_uart7";
 					drive-strength = <2>;
@@ -1331,22 +1333,22 @@
 				};
 			};
 
-			blsp2_uart1_sleep: blsp2-uart1-sleep {
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart4_default: blsp2-uart4-default {
-				tx-rts {
+			blsp2_uart4_default: blsp2-uart4-default-state {
+				tx-rts-pins {
 					pins = "gpio53", "gpio56";
 					function = "blsp_uart10";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx-cts {
+				rx-cts-pins {
 					pins = "gpio54", "gpio55";
 					function = "blsp_uart10";
 					drive-strength = <2>;
@@ -1354,42 +1356,42 @@
 				};
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
@@ -1400,14 +1402,14 @@
 
 			/* BLSP1_I2C5 info is missing */
 
-			blsp1_i2c6_default: blsp1-i2c6-default {
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
 				pins = "gpio29", "gpio30";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				pins = "gpio29", "gpio30";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
@@ -1417,14 +1419,14 @@
 
 			/* BLSP2_I2C1 info is missing */
 
-			blsp2_i2c2_default: blsp2-i2c2-default {
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
@@ -1435,48 +1437,80 @@
 
 			/* BLSP2_I2C4 info is missing */
 
-			blsp2_i2c5_default: blsp2-i2c5-default {
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6-default {
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			spi8_default: spi8_default {
-				mosi {
+			cci_default: cci-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c0";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					pins = "gpio21", "gpio22";
+					function = "cci_i2c1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-pins {
+					pins = "gpio19", "gpio20";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-pins {
+					pins = "gpio21", "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi8_default: spi8_default-state {
+				mosi-pins {
 					pins = "gpio45";
 					function = "blsp_spi8";
 				};
-				miso {
+				miso-pins {
 					pins = "gpio46";
 					function = "blsp_spi8";
 				};
-				cs {
+				cs-pins {
 					pins = "gpio47";
 					function = "blsp_spi8";
 				};
-				clk {
+				clk-pins {
 					pins = "gpio48";
 					function = "blsp_spi8";
 				};
@@ -1571,7 +1605,6 @@
 					      "core_mmss";
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi-phy";
 
 				status = "disabled";
 
@@ -1597,7 +1630,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@fd922a00 {
+			dsi0_phy: phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
@@ -1616,6 +1649,40 @@
 			};
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: adreno@fdb00000 {
 			compatible = "qcom,adreno-330.1", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
@@ -1703,8 +1770,6 @@
 				qcom,ipc = <&apcs 8 8>;
 				qcom,smd-edge = <1>;
 				label = "lpass";
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 		};
 
@@ -1719,13 +1784,6 @@
 		};
 	};
 
-	tcsr_mutex: tcsr-mutex {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index ff6e0066768b..f531d2679f6c 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -8,7 +8,8 @@
 
 / {
 	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
+	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		mmc0 = &sdhc_1;
@@ -85,31 +86,6 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio1", "gpio2", "gpio5";
@@ -190,7 +166,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -209,7 +185,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -408,36 +384,36 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	wcnss_pin_a: wcnss-pin-active {
-		wlan {
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
 			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 			function = "wlan";
 
@@ -445,7 +421,7 @@
 			bias-pull-down;
 		};
 
-		bt {
+		bt-pins {
 			pins = "gpio35", "gpio43", "gpio44";
 			function = "bt";
 
@@ -453,7 +429,7 @@
 			bias-pull-down;
 		};
 
-		fm {
+		fm-pins {
 			pins = "gpio41", "gpio42";
 			function = "fm";
 
@@ -462,3 +438,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
new file mode 100644
index 000000000000..b5606623f968
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "OnePlus One";
+	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+	qcom,msm-id = <194 0x10000>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196_charger>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	rmi4-i2c-dev@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		syna,startup-delay-ms = <100>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			/*
+			 * Touchscreen size is 2040x1080, y-values between
+			 * 1920-2040 are used for touchkey (menu, home & back).
+			 * For now clip it off so we don't get touch events
+			 * outside of the display area.
+			 */
+			syna,clip-y-high = <1920>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq24196_charger: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+		omit-battery-class;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro-ac";
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <800>;
+	qcom,vset-millivolts = <3200>;
+
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	touch_default_state: touch-default-state {
+		int-pins {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
+
+		reset-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index 983e10c3d863..b9698ffb66ca 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -7,7 +7,8 @@
 
 / {
 	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974";
+	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart1;
@@ -375,28 +376,6 @@
 	status = "okay";
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pma8084_l6>;
-			v3p3-supply = <&pma8084_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pma8084_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio5";
@@ -470,7 +449,7 @@
 };
 
 &rpm_requests {
-	pma8084-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pma8084-regulators";
 
 		pma8084_s1: s1 {
@@ -706,57 +685,57 @@
 
 &tlmm {
 	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active {
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
 		function = "blsp_uart8";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	bt_pins: bt-pins {
-		hostwake {
+	bt_pins: bt-pins-state {
+		hostwake-pins {
 			pins = "gpio75";
 			function = "gpio";
 			drive-strength = <16>;
 			input-enable;
 		};
 
-		devwake {
+		devwake-pins {
 			pins = "gpio91";
 			function = "gpio";
 			drive-strength = <2>;
 		};
 	};
 
-	sdc1_on: sdhc1-on {
-		clk {
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <4>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
 
-	sdc3_on: sdc3-on {
+	sdc3_on: sdc3-on-state {
 		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 		function = "sdc3";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	sdhc3_cd_pin: sdc3-cd-on {
+	sdhc3_cd_pin: sdc3-cd-on-state {
 		pins = "gpio62";
 		function = "gpio";
 
@@ -764,52 +743,72 @@
 		bias-disable;
 	};
 
-	sdc2_on: sdhc2-on {
-		clk {
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	i2c_touchkey_pins: i2c-touchkey {
+	i2c_touchkey_pins: i2c-touchkey-state {
 		pins = "gpio95", "gpio96";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	i2c_led_gpioex_pins: i2c-led-gpioex {
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
 		pins = "gpio120", "gpio121";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
 	};
 
-	gpioex_pin: gpioex {
+	gpioex_pin: gpioex-state {
 		pins = "gpio145";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 
-	wifi_pin: wifi {
+	wifi_pin: wifi-state {
 		pins = "gpio92";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
 	};
 
-	panel_te_pin: panel {
+	panel_te_pin: panel-state {
 		pins = "gpio12";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 3f45f5c5d37b..3b1cc39f2269 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -8,7 +8,8 @@
 
 / {
 	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974";
+	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &blsp1_uart2;
@@ -212,31 +213,6 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_coincell {
 	status = "okay";
 
@@ -294,7 +270,7 @@
 
 	qcom,power-source = <1>;
 
-	rgb-led {
+	multi-led {
 		color = <LED_COLOR_ID_RGB>;
 		function = LED_FUNCTION_STATUS;
 
@@ -319,7 +295,7 @@
 };
 
 &rpm_requests {
-	pm8941-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -548,41 +524,42 @@
 };
 
 &tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio {
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
 		pins = "gpio69";
+		function = "gpio";
 		drive-strength = <10>;
 		output-low;
 		bias-disable;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -590,22 +567,22 @@
 		};
 	};
 
-	sdc3_on: sdc3-on {
-		clk {
+	sdc3_on: sdc3-on-state {
+		clk-pins {
 			pins = "gpio40";
 			function = "sdc3";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "gpio39";
 			function = "sdc3";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "gpio35", "gpio36", "gpio37", "gpio38";
 			function = "sdc3";
 			drive-strength = <10>;
@@ -613,7 +590,7 @@
 		};
 	};
 
-	ts_int_pin: ts-int-pin {
+	ts_int_pin: ts-int-pin-state {
 		pins = "gpio86";
 		function = "gpio";
 		drive-strength = <2>;
@@ -621,7 +598,7 @@
 		input-enable;
 	};
 
-	bt_host_wake_pin: bt-host-wake {
+	bt_host_wake_pin: bt-host-wake-state {
 		pins = "gpio95";
 		function = "gpio";
 		drive-strength = <2>;
@@ -629,10 +606,33 @@
 		output-low;
 	};
 
-	bt_dev_wake_pin: bt-dev-wake {
+	bt_dev_wake_pin: bt-dev-wake-state {
 		pins = "gpio96";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index 9b7d9d04ded6..eb36d3662464 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -90,6 +90,16 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pm8226_gpios: gpio@c000 {
+			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_gpios 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8226_1: pm8226@1 {
@@ -98,7 +108,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8226_spmi_regulators: pm8226-regulators {
+		pm8226_spmi_regulators: regulators {
 			compatible = "qcom,pm8226-regulators";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 9cd49deb9fa7..cd957a1e7cdf 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		usb_id: misc@900 {
+		usb_id: usb-detect@900 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x900>;
 			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
@@ -59,7 +59,7 @@
 			chg_otg: otg-vbus { };
 		};
 
-		pm8941_gpios: gpios@c000 {
+		pm8941_gpios: gpio@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -101,37 +101,44 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			bat_temp {
-				reg = <VADC_LR_MUX1_BAT_THERM>;
+
+			adc-chan@6 {
+				reg = <VADC_VBAT_SNS>;
 			};
-			die_temp {
+
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
-			vbat_sns {
-				reg = <VADC_VBAT_SNS>;
+
+			adc-chan@30 {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
 			};
 		};
 
-		pm8941_iadc: iadc@3600 {
+		pm8941_iadc: adc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
 			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
 
-		pm8941_coincell: coincell@2800 {
+		pm8941_coincell: charger@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e77602e9f95c..2dd4c6aa71c9 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		pma8084_gpios: gpios@c000 {
+		pma8084_gpios: gpio@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -64,22 +64,27 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			die_temp {
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_buf_625mv {
+
+			adc-chan@c {
 				reg = <VADC_SPARE1>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
index abf229a8b75a..1c7fdf59c1f5 100644
--- a/arch/arm/boot/dts/qcom-pmx65.dtsi
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -20,7 +20,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pmx65_gpios: pinctrl@8800 {
+		pmx65_gpios: gpio@8800 {
 			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index a4fa468a095f..ac8b4626ae9a 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -282,40 +282,25 @@
 };
 
 &tlmm {
-	pcie_ep_clkreq_default: pcie_ep_clkreq_default {
-		mux {
-			pins = "gpio56";
-			function = "pcie_clkreq";
-		};
-		config {
-			pins = "gpio56";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pcie_ep_perst_default: pcie_ep_perst_default {
-		mux {
-			pins = "gpio57";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio57";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	pcie_ep_wake_default: pcie_ep_wake_default {
-		mux {
-			pins = "gpio53";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio53";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index c72540223fa9..f1c0dab40992 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -559,6 +559,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
 		};
 
 		sram@1468f000 {
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 4cd405db5500..b073e0c63df4 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -441,8 +441,8 @@
 			interrupt-controller;
 		};
 
-		imem@1468f000 {
-			compatible = "simple-mfd";
+		sram@1468f000 {
+			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
 			reg = <0x1468f000 0x1000>;
 			ranges = <0x0 0x1468f000 0x1000>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 758a1bf02fae..73be346001cb 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -1298,7 +1298,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index db171e3c62f2..111a6d23159e 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1252,7 +1252,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index d8f91d9f42ae..777b672b59cc 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1365,7 +1365,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 9ebe7bfaf0ed..3e0be1b58931 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1111,7 +1111,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 563024c9a4ae..41e19c0986ce 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -199,7 +199,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -212,7 +212,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -225,7 +225,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -238,7 +238,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
@@ -251,7 +251,7 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 9fd4d9db9f8f..becdc0b664bf 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -35,11 +35,10 @@
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index cfa318a506eb..2db5ba706208 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index e7cf18823558..118deacd38c4 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -71,7 +71,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index cdd4a0bd5133..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -379,7 +379,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -607,7 +607,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 399d6b9c5fd4..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 052afe5543e2..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,11 +233,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,11 +162,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 80e0f07c8e87..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,11 +165,10 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index bf285091a9eb..cb4e42ede56a 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
index 4eb30445d205..a67a156e26ab 100644
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
@@ -673,7 +673,7 @@
 #define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
 #define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
 #define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
 #define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
 #define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
 #define PIN_PD9				105
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7bd8ae8e8d38..ab131762ecb5 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -9,12 +9,15 @@
  *
  */
 
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Microchip SAMA7G5 family SoC";
@@ -34,6 +37,7 @@
 			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -72,6 +76,46 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	clocks {
 		slow_xtal: slow_xtal {
 			compatible = "fixed-clock";
@@ -108,6 +152,13 @@
 		ranges;
 	};
 
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -153,7 +204,7 @@
 			};
 		};
 
-		securam: securam@e0000000 {
+		securam: sram@e0000000 {
 			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 			reg = <0xe0000000 0x4000>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
@@ -420,6 +471,9 @@
 			atmel,min-sample-rate-hz = <200000>;
 			atmel,max-sample-rate-hz = <20000000>;
 			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
 			status = "disabled";
 		};
 
@@ -888,6 +942,17 @@
 			reg = <0xe3804000 0x1000>;
 		};
 
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 2459f3cd7dd9..6eda6fdc101b 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -453,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -755,7 +754,7 @@
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -765,6 +764,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4370e3cbbb4b..3b2a2c9c6547 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -365,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -656,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -666,6 +665,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index ad7cd14de6b6..41f865c8c098 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -73,6 +73,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
index 9aa897b79544..a662df319a84 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x02000000>;
+			reg = <0x0 0x02500000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x02000000 0x06000000>;
+			reg = <0x02500000 0x05500000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3d7..d3969367f4b5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &eccmgr {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 22dbf07afcff..40fecde65c54 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 7f5458d8fccc..c48385702a85 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&porta 0 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 11 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&porta 17 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&porta 18 1>;
 		};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 319a71e41ea4..305fe207b237 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index c8f051fb2bf6..bedf577cb056 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -33,7 +33,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 24 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index bd92806ffc12..3b9daddf91cd 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@
 
 &mmc0 {	/* On-SoM eMMC */
 	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index b2241205c7a9..c7f5fa0ba0f2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 15 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 14 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 13 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&portb 12 1>;
 		};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index f24f17c2f5ee..e0630b0eed03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -141,7 +141,7 @@
 		reg = <0x50>;
 	};
 
-	i2cswitch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index a77846f73b34..3d0d806888b7 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..6b67c0ceaed9 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
@@ -207,6 +207,36 @@
 				interrupts = <6>;
 				status = "disabled";
 			};
+
+			ssp1: spi@d0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <26>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d0180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d8180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd8180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic1>;
+				interrupts = <5>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 9afe8301bd47..a42a4fd69299 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1149,17 +1149,15 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 1>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		hash@a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 2>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
index 27a3ab7e25e1..e036393d5415 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -247,7 +247,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index b88f0c07873d..1a6d24a7ccb8 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -333,7 +333,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 7231bc745200..5b445fa4c8c0 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -277,7 +277,7 @@
 	/*
 	 * TODO: See if we can use the PL023 for this instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 69387e8754a9..e901cb76b899 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -271,7 +271,7 @@
 	 * this derivative is 3wire support, so it cannot be used to drive
 	 * this panel interface. We have to use GPIO bit-banging instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220 */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -373,9 +373,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		nfc@30 {
-			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
-			reg = <0x30>;
+		/* This is only mounted on the GT-I9070P */
+		nfc@2b { /* 0x30? */
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
 			/* NFC IRQ on GPIO32 */
 			interrupt-parent = <&gpio1>;
 			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
@@ -384,7 +388,7 @@
 			/* GPIO88 */
 			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pn547_janice_default>;
+			pinctrl-0 = <&pn544_janice_default>;
 		};
 	};
 
@@ -959,7 +963,7 @@
 		};
 	};
 	nfc {
-		pn547_janice_default: pn547_janice {
+		pn544_janice_default: pn544_janice {
 			/* Interrupt line */
 			janice_cfg1 {
 				pins = "GPIO32_V2";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 167846df3104..45fab5283a9d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -315,6 +315,21 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_kyle_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
@@ -674,6 +689,20 @@
 			};
 		};
 	};
+	g05ta03 {
+		g05ta03_kyle_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			kyle_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			kyle_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 26d93f26f6d0..240b62040000 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -27,26 +27,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user_green_1 {
+		led-user-green-1 {
 			label = "User_green_1";
 			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		user_green_2 {
+		led-user-green-2 {
 			label = "User_green_2";
 			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_3 {
+		led-user-green-3 {
 			label = "User_green_3";
 			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_4 {
+		led-user-green-4 {
 			label = "User_green_4";
 			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index d21bcc7c1271..53ac6c2b7b7d 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -26,12 +26,12 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
index a99604bebf8c..34a518b037ab 100644
--- a/arch/arm/boot/dts/stih418-b2264.dts
+++ b/arch/arm/boot/dts/stih418-b2264.dts
@@ -76,7 +76,7 @@
 	soc {
 		leds {
 			compatible = "gpio-leds";
-			green {
+			led-green {
 				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..920a0bad7494 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -9,12 +9,12 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 2059593da21d..28e3deb20e1e 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -375,7 +375,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +388,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index efdd163eba30..d377d4c0bef5 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -6,6 +6,13 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -40,6 +47,13 @@
 		};
 	};
 
+	mcp23017_pins_a: mcp23017-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
@@ -165,6 +179,13 @@
 		};
 	};
 
+	stm32g0_intn_pins_a: stm32g0-intn-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
 	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index dd35a607073d..accc3824f7e9 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -77,6 +77,28 @@
 		always-on;
 	};
 
+	/* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */
+	reg11: reg11 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+	};
+
+	reg18: reg18 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usb33: usb33 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -231,6 +253,66 @@
 			dma-channels = <16>;
 		};
 
+		adc_2: adc@48004000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc2: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_2>;
+				interrupts = <0>;
+				dmas = <&dmamux1 10 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@13 {
+					reg = <13>;
+					label = "vrefint";
+				};
+				channel@14 {
+					reg = <14>;
+					label = "vddcore";
+				};
+				channel@16 {
+					reg = <16>;
+					label = "vddcpu";
+				};
+				channel@17 {
+					reg = <17>;
+					label = "vddq_ddr";
+				};
+			};
+		};
+
+		usbotg_hs: usb@49000000 {
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x40000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+			dr_mode = "otg";
+			otg-rev = <0x200>;
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
 		spi4: spi@4c002000 {
 			compatible = "st,stm32h7-spi";
 			reg = <0x4c002000 0x400>;
@@ -354,7 +436,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -369,7 +450,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
@@ -379,6 +459,25 @@
 			status = "disabled";
 		};
 
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
@@ -387,6 +486,29 @@
 			status = "disabled";
 		};
 
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
 		rtc: rtc@5c004000 {
 			compatible = "st,stm32mp1-rtc";
 			reg = <0x5c004000 0x400>;
diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
index 531c263c9f46..df451c3c2a26 100644
--- a/arch/arm/boot/dts/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/stm32mp133.dtsi
@@ -33,5 +33,36 @@
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
+
+		adc_1: adc@48003000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_1>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@18 {
+					reg = <18>;
+					label = "vrefint";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index de341d17e87d..9ff5a3eaf55b 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -59,6 +59,22 @@
 		};
 	};
 
+	v3v3_sw: v3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_sw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc: vdd-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	vdd_sd: vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_sd";
@@ -66,6 +82,39 @@
 		regulator-max-microvolt = <2900000>;
 		regulator-always-on;
 	};
+
+	vdd_usb: vdd-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_usb_cc_pins_a>;
+	vdda-supply = <&vdd_adc>;
+	vref-supply = <&vdd_adc>;
+	status = "okay";
+	adc1: adc@0 {
+		status = "okay";
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
 };
 
 &i2c1 {
@@ -79,6 +128,42 @@
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	mcp23017: pinctrl@21 {
+		compatible = "microchip,mcp23017";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp23017_pins_a>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		microchip,irq-mirror;
+	};
+
+	typec@53 {
+		compatible = "st,stm32g0-typec";
+		reg = <0x53>;
+		/* Alert pin on PI2 */
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		/* Internal pull-up on PI2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&stm32g0_intn_pins_a>;
+		firmware-name = "stm32g0-ucsi.mp135f-dk.fw";
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				con_usb_c_g0_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
 };
 
 &i2c5 {
@@ -108,7 +193,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
@@ -128,3 +213,60 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	status = "okay";
 };
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3_sw>;
+	};
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usb_c_g0_ep>;
+		};
+	};
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index e02b3f5d44cb..5491b6c4dec2 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1118,7 +1118,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC3_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
@@ -1439,7 +1438,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -1454,7 +1452,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
diff --git a/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
new file mode 100644
index 000000000000..e0f828ecc2fa
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-testbench.dtsi"
+
+/ {
+	model = "DH electronics STM32MP151A DHCOR Testbench";
+	compatible = "dh,stm32mp151a-dhcor-testbench",
+		     "dh,stm32mp151a-dhcor-som",
+		     "st,stm32mp151";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
index 30156b7546ed..aef02e6421a3 100644
--- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -173,7 +173,7 @@
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 050c3c27a420..a665189fe621 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -144,7 +144,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -370,6 +370,14 @@
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
@@ -393,6 +401,11 @@
 	st,tune-squelch-level = <3>;
 	st,tune-hs-rx-offset = <2>;
 	st,no-lsfs-sc;
+
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
 };
 
 &usbphyc_port1 {
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index e8d2ec41d537..cb00ce7cec8b 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index ed66d25b8bf3..a8b3f7a54703 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -41,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5f586f024060..4709677151aa 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -242,7 +242,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
@@ -260,7 +260,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 238a611192e7..002f221f1694 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -125,7 +125,7 @@
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d66d..50af4a27d6be 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -66,7 +66,6 @@
 		led4 {
 			label = "green:user3";
 			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 			default-state = "off";
 			panic-indicator;
 		};
@@ -100,7 +99,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -151,7 +150,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -359,7 +358,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&adv7513_i2s0>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 			};
 		};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
index 27477bb219de..c32c160f97f2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -78,7 +78,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
new file mode 100644
index 000000000000..5fdb74b652ac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 8b48d3c89a04..7798a2e17c5c 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -141,7 +141,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -508,7 +508,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
@@ -526,7 +526,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 0edc1724407b..9455d27e516e 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -166,6 +166,12 @@
 				drive-strength = <30>;
 			};
 
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
 			spi0_pc_pins: spi0-pc-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
@@ -177,6 +183,42 @@
 			};
 		};
 
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		timer@1c20c00 {
 			compatible = "allwinner,suniv-f1c100s-timer";
 			reg = <0x01c20c00 0x90>;
@@ -192,6 +234,34 @@
 			clocks = <&osc32k>;
 		};
 
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
 		uart0: serial@1c25000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c25000 0x400>;
diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi
index 7dc4ce3619c7..ae9bbe0320b8 100644
--- a/arch/arm/boot/dts/sunplus-sp7021.dtsi
+++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi
@@ -211,7 +211,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_1>;
 			resets = <&rstc RST_SPI_COMBO_1>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -225,7 +224,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_2>;
 			resets = <&rstc RST_SPI_COMBO_2>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -239,7 +237,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_3>;
 			resets = <&rstc RST_SPI_COMBO_3>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index e899d14f38c3..1d1d127cf38f 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -89,13 +89,13 @@
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 09aefb4e90f8..686193bd6bd9 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -302,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -312,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
index 284209b0bd96..9279d24db009 100644
--- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts
+++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
@@ -80,7 +80,7 @@
 	};
 
 	pinmux@70000868 {
-		asus_pad_ec_default: asus-pad-ec-default {
+		asus_pad_ec_default: pinmux-asus-pad-ec-default {
 			ec-interrupt {
 				nvidia,pins = "kb_col5_pq5";
 				nvidia,function = "kbc";
@@ -98,7 +98,7 @@
 			};
 		};
 
-		backlight_default: backlight-default {
+		backlight_default: pinmux-backlight-default {
 			backlight-enable {
 				nvidia,pins = "gmi_ad10_ph2";
 				nvidia,function = "gmi";
@@ -108,7 +108,7 @@
 			};
 		};
 
-		codec_default: codec-default {
+		codec_default: pinmux-codec-default {
 			ldo1-en {
 				nvidia,pins = "sdmmc1_wp_n_pv3";
 				nvidia,function = "sdmmc1";
@@ -127,7 +127,7 @@
 			};
 		};
 
-		gpio_keys_default: gpio-keys-default {
+		gpio_keys_default: pinmux-gpio-keys-default {
 			power {
 				nvidia,pins = "kb_col0_pq0";
 				nvidia,function = "kbc";
@@ -146,7 +146,7 @@
 			};
 		};
 
-		gpio_hall_sensor_default: gpio-hall-sensor-default {
+		gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default {
 			ulpi_data4_po5 {
 				nvidia,pins = "ulpi_data4_po5";
 				nvidia,function = "spi2";
@@ -156,7 +156,7 @@
 			};
 		};
 
-		hp_det_default: hp-det-default {
+		hp_det_default: pinmux-hp-det-default {
 			gmi_iordy_pi5 {
 				nvidia,pins = "kb_row7_pr7";
 				nvidia,function = "rsvd2";
@@ -166,7 +166,7 @@
 			};
 		};
 
-		imu_default: imu-default {
+		imu_default: pinmux-imu-default {
 			kb_row3_pr3 {
 				nvidia,pins = "kb_row3_pr3";
 				nvidia,function = "rsvd3";
@@ -176,7 +176,7 @@
 			};
 		};
 
-		pwm_default: pwm-default {
+		pwm_default: pinmux-pwm-default {
 			gmi_ad9_ph1 {
 				nvidia,pins = "gmi_ad9_ph1";
 				nvidia,function = "pwm1";
@@ -187,7 +187,7 @@
 		};
 
 		/* XXX make this something more sensible */
-		pwm_sleep: pwm-sleep {
+		pwm_sleep: pinmux-pwm-sleep {
 			gmi_ad9_ph1 {
 				nvidia,pins = "gmi_ad9_ph1";
 				nvidia,function = "pwm1";
@@ -197,7 +197,7 @@
 			};
 		};
 
-		sdmmc3_default: sdmmc3-default {
+		sdmmc3_default: pinmux-sdmmc3-default {
 			sdmmc3_clk_pa6 {
 				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
@@ -233,7 +233,7 @@
 			};
 		};
 
-		sdmmc3_vdd_default: sdmmc3-vdd-default {
+		sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default {
 			gmi_clk_pk1 {
 				nvidia,pins = "gmi_clk_pk1";
 				nvidia,function = "gmi";
@@ -243,7 +243,7 @@
 			};
 		};
 
-		vdd_lcd_default: vdd-lcd-default {
+		vdd_lcd_default: pinmux-vdd-lcd-default {
 			sdmmc4_clk_pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4";
 				nvidia,function = "sdmmc4";
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index fdc1d64dfff9..9a01dfed1379 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -18,6 +18,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -39,7 +40,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index abdf4456826f..0beef1c03ff3 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -20,6 +20,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -37,7 +38,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 8f40fcfc11b0..7e739879c00c 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -52,6 +52,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -70,7 +71,7 @@
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_boot: common {
+		pinmux_boot: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index dac6d02a1b15..17afc2c7cb37 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -342,7 +342,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -353,7 +353,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -364,7 +364,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index bf797a1f27ea..c39ddb462ad0 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -399,7 +399,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -411,7 +411,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -423,7 +423,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -1019,7 +1019,7 @@
 	};
 
 	display-panel {
-		compatible = "panel-lvds";
+		compatible = "auo,b101ew05", "panel-lvds";
 
 		/* AUO B101EW05 using custom timings */
 
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 5b4c5ef30996..ab33ff67fdb9 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -285,7 +285,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -296,7 +296,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -307,7 +307,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 0e19bd0a847c..980272ad59a4 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -249,7 +249,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -260,7 +260,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -271,7 +271,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index caa17e876e41..2d7bb442d6b6 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -284,7 +284,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -295,7 +295,7 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
@@ -306,7 +306,7 @@
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index c27e70d8bf2b..08ea9cb32d0e 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -168,7 +168,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -711,7 +711,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* GPIO keys pinmux */
@@ -805,7 +805,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -937,7 +937,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -1509,7 +1509,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-hall-sensor {
 			label = "Lid sensor";
@@ -1542,7 +1541,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
index 7c81f0205549..d9408a90653a 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -134,7 +134,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -150,7 +150,6 @@
 				nvidia,pins = "sdmmc3_cmd_pa7",
 						"sdmmc3_dat3_pb4",
 						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat2_pb5",
 						"sdmmc3_dat1_pb6",
 						"sdmmc3_dat0_pb7",
 						"sdmmc3_dat5_pd0",
@@ -622,7 +621,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			pu1 {
@@ -689,7 +688,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -864,7 +863,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -2653,7 +2652,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-insert {
 			label = "Chagall Dock";
@@ -2686,7 +2684,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
diff --git a/arch/arm/boot/dts/uniphier-pro5-epcore.dts b/arch/arm/boot/dts/uniphier-pro5-epcore.dts
new file mode 100644
index 000000000000..ed759dcc3216
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro5-epcore.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 EP-CORE Board (Pro5-PCIe_EP-CORE)
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro5 EP-CORE Board";
+	compatible = "socionext,uniphier-pro5-epcore", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro5-proex.dts b/arch/arm/boot/dts/uniphier-pro5-proex.dts
new file mode 100644
index 000000000000..2cfb84f73cc0
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro5-proex.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 ProEX Board
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+
+/ {
+	model = "UniPhier Pro5 ProEX Board";
+	compatible = "socionext,uniphier-pro5-proex", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index f434fe5cf4a1..def538ce8769 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -383,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..f892977da9e4 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -259,7 +259,7 @@
 		xtal-trim = /bits/ 8 <0x06>;
 
 		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
 
 		fsl,spi-cs-sck-delay = <180>;
 		fsl,spi-sck-cs-delay = <250>;
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 92481b2a88fa..adcee238822a 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -14,7 +14,8 @@ CONFIG_ARCH_EDB7211=y
 CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 2a2d2cb3ce2e..69341c33e0cc 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -13,7 +13,8 @@ CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SWAP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 078d61b758a9..025eb333dcaa 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -166,6 +166,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_AD7879=y
 CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_CYTTSP5=y
 CONFIG_TOUCHSCREEN_DA9052=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_GOODIX=y
@@ -222,6 +223,7 @@ CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
@@ -237,6 +239,7 @@ CONFIG_MFD_DA9062=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -250,6 +253,7 @@ CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
@@ -397,6 +401,7 @@ CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index e2fd822f741a..b60000a89aff 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -25,7 +25,8 @@ CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b61b2e3d116b..ee184eb37adc 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -663,11 +663,11 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
-CONFIG_VIDEO_ATMEL_ISC=m
-CONFIG_VIDEO_ATMEL_XISC=m
 CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_VIDEO_MICROCHIP_CSI2DC=m
 CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_VIDEO_MICROCHIP_ISC=m
+CONFIG_VIDEO_MICROCHIP_XISC=m
+CONFIG_VIDEO_MICROCHIP_CSI2DC=m
 CONFIG_VIDEO_TEGRA_VDE=m
 CONFIG_VIDEO_RENESAS_CEU=m
 CONFIG_VIDEO_RCAR_VIN=m
@@ -891,6 +891,8 @@ CONFIG_USB_CONFIGFS_F_UVC=y
 CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ETH=m
 CONFIG_TYPEC=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_STM32G0=m
 CONFIG_TYPEC_STUSB160X=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 70511fe4b3ec..246f1bba7df5 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -42,7 +42,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SWAP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index d60cc9cc4c21..0a0f12df40b5 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -49,7 +49,8 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 7d8b6884fd00..b41716c1ec64 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -131,14 +131,19 @@ CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ4019=y
 CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8226=y
 CONFIG_PINCTRL_MSM8660=y
 CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MDM9607=y
 CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_MSM8909=y
+CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_PINCTRL_SDX55=y
+CONFIG_PINCTRL_SDX65=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 877bbe7b777e..f89fd4e0d10a 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -150,8 +150,8 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_ATMEL_ISC=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MICROCHIP_ISC=y
 CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV5640=m
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 8f28c9d443f0..0d964c613d71 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -128,6 +128,10 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AT91_RESET=y
 CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_STATISTICS=y
+CONFIG_CPU_THERMAL=y
+CONFIG_GENERIC_ADC_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_SAMA5D4_WATCHDOG=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
@@ -140,7 +144,7 @@ CONFIG_MEDIA_SUPPORT_FILTER=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_ATMEL_XISC=y
+CONFIG_VIDEO_MICROCHIP_XISC=y
 CONFIG_VIDEO_MICROCHIP_CSI2DC=y
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX274=m
@@ -196,6 +200,7 @@ CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_MCHP_EIC=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_NVMEM_MICROCHIP_OTPC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_FANOTIFY=y
@@ -211,13 +216,13 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_LSM="N"
 CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CFB=y
 CONFIG_CRYPTO_OFB=y
 CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index 3d631b1f3cfa..3e2c2abae5ba 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -11,7 +11,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
@@ -28,23 +27,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_SMSC is not set
 CONFIG_STMMAC_ETH=y
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_RAW_DRIVER=y
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
-CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_DRM=y
+CONFIG_DRM_PL111=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 3b29ae1fb750..6bd38b6f22c4 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -19,7 +19,8 @@ CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_SWAP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index ea59e4b6bfc5..6bd9f71b71fc 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -26,7 +26,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLOCK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..090011394477 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -45,12 +45,6 @@
 typedef pte_t *pte_addr_t;
 
 /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot)	(prot)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 78a532068fec..ef48a55e9af8 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -139,13 +148,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  */
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ffed4d949042..e4904faf1753 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -169,10 +169,15 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
 
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
 	/* Disable DX DLLs. */
 	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
 	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 67ed68fbe3a5..bf2b5c6a18c6 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -26,7 +26,7 @@ static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
 static void __init sama5_secure_cache_init(void)
 {
 	sam_secure_init();
-	if (sam_linux_is_optee_available())
+	if (IS_ENABLED(CONFIG_OUTER_CACHE) && sam_linux_is_optee_available())
 		outer_cache.write_sec = sama5_l2c310_write_sec;
 }
 
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 28db97289ee8..0788c5cc7f9e 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f543e2adae0c..1b4d84a5b02f 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -2,48 +2,7 @@
 /*
  * IXP4xx Device Tree boot support
  */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-/*
- * These are the only fixed phys to virt mappings we ever need
- * we put it right after the UART mapping at 0xffc80000-0xffc81fff
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
-
-static struct map_desc ixp4xx_of_io_desc[] __initdata = {
-	/*
-	 * This is needed for runtime system configuration checks,
-	 * such as reading if hardware so-and-so is present. This
-	 * could eventually be converted into a syscon once all boards
-	 * are converted to device tree.
-	 */
-	{
-		.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_UART_8250
-	/* This is needed for LL-debug/earlyprintk/debug-macro.S */
-	{
-		.virtual = CONFIG_DEBUG_UART_VIRT,
-		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#endif
-};
-
-static void __init ixp4xx_of_map_io(void)
-{
-	iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
-}
 
 /*
  * We handle 4 different SoC families. These compatible strings are enough
@@ -59,6 +18,5 @@ static const char *ixp4xx_of_board_compat[] = {
 };
 
 DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
-	.map_io		= ixp4xx_of_map_io,
 	.dt_compat	= ixp4xx_of_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index 739b38be5696..0c1d54aec60f 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-y					:= keystone.o smc.o
-
-obj-$(CONFIG_SMP)			+= platsmp.o
+obj-y					:= keystone.o
 
 # PM domain driver for Keystone SOCs
 obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 2c647bdf8d25..aa352c2de313 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -18,7 +18,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/smp_plat.h>
 #include <asm/memory.h>
 
 #include "memory.h"
@@ -103,7 +102,6 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
 #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
 	.dma_zone_size	= SZ_2G,
 #endif
-	.smp		= smp_ops(keystone_smp_ops),
 	.init_machine	= keystone_init,
 	.dt_compat	= keystone_match,
 	.pv_fixup	= keystone_pv_fixup,
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
index 438e531cc007..71ff8cd2ee4a 100644
--- a/arch/arm/mach-keystone/keystone.h
+++ b/arch/arm/mach-keystone/keystone.h
@@ -8,13 +8,8 @@
 #ifndef __KEYSTONE_H__
 #define __KEYSTONE_H__
 
-#define KEYSTONE_MON_CPU_UP_IDX		0x00
-
 #ifndef __ASSEMBLER__
 
-extern const struct smp_operations keystone_smp_ops;
-extern void secondary_startup(void);
-extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
 extern int keystone_pm_runtime_init(void);
 
 #endif /* __ASSEMBLER__ */
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
deleted file mode 100644
index 673fcf3b34b1..000000000000
--- a/arch/arm/mach-keystone/platsmp.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Keystone SOC SMP platform code
- *
- * Copyright 2013 Texas Instruments, Inc.
- *	Cyril Chemparathy <cyril@ti.com>
- *	Santosh Shilimkar <santosh.shillimkar@ti.com>
- *
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/pgtable.h>
-
-#include <asm/smp_plat.h>
-#include <asm/prom.h>
-#include <asm/tlbflush.h>
-
-#include "keystone.h"
-
-static int keystone_smp_boot_secondary(unsigned int cpu,
-						struct task_struct *idle)
-{
-	unsigned long start = virt_to_idmap(&secondary_startup);
-	int error;
-
-	pr_debug("keystone-smp: booting cpu %d, vector %08lx\n",
-		 cpu, start);
-
-	error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start);
-	if (error)
-		pr_err("CPU %d bringup failed with %d\n", cpu, error);
-
-	return error;
-}
-
-const struct smp_operations keystone_smp_ops __initconst = {
-	.smp_boot_secondary	= keystone_smp_boot_secondary,
-};
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
deleted file mode 100644
index 21ef75cf5370..000000000000
--- a/arch/arm/mach-keystone/smc.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Keystone Secure APIs
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * 	Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-
-#include <linux/linkage.h>
-
-/**
- * u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr)
- *
- * Low level CPU monitor API
- * @command:	Monitor command.
- * @cpu:	CPU Number
- * @addr:	Kernel jump address for boot CPU
- *
- * Return: Non zero value on failure
- */
-	.arch_extension sec
-ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r11, lr}
-	smc	#0
-	ldmfd   sp!, {r4-r11, pc}
-ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 7fa1806acd65..beec22e17e89 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -8,19 +8,19 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include "common.h"
 
 #define ARMADA_PIC_NR_GPIOS 3
 
 static void __iomem *gpio_ctrl;
-static int pic_gpios[ARMADA_PIC_NR_GPIOS];
+static struct gpio_desc *pic_gpios[ARMADA_PIC_NR_GPIOS];
 static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
 
 static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
@@ -90,27 +90,17 @@ static int __init mvebu_armada_pm_init(void)
 		char *name;
 		struct of_phandle_args args;
 
-		pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
-		if (pic_gpios[i] < 0) {
-			ret = -ENODEV;
-			goto out;
-		}
-
 		name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
 		if (!name) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		ret = gpio_request(pic_gpios[i], name);
-		if (ret < 0) {
-			kfree(name);
-			goto out;
-		}
-
-		ret = gpio_direction_output(pic_gpios[i], 0);
-		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+		pic_gpios[i] = fwnode_gpiod_get_index(of_fwnode_handle(np),
+						      "ctrl", i, GPIOD_OUT_HIGH,
+						      name);
+		ret = PTR_ERR_OR_ZERO(pic_gpios[i]);
+		if (ret) {
 			kfree(name);
 			goto out;
 		}
@@ -118,7 +108,7 @@ static int __init mvebu_armada_pm_init(void)
 		ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
 						       i, &args);
 		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+			gpiod_put(pic_gpios[i]);
 			kfree(name);
 			goto out;
 		}
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 25c9d184fa4c..0129b7c514d7 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -17,7 +17,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -393,8 +392,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b6c7d98a9eff..4d46c56db38b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1135,65 +1135,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
 	.class		= &omap34xx_mcspi_class,
 };
 
-/* usbhsotg */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
-	.name = "usbotg",
-	.sysc = &omap3xxx_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
-	.name		= "usb_otg_hs",
-	.main_clk	= "hsotgusb_ick",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
-		},
-	},
-	.class		= &usbotg_class,
-
-	/*
-	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
-	 * broken when autoidle is enabled
-	 * workaround is to disable the autoidle bit at module level.
-	 *
-	 * Enabling the device in any other MIDLEMODE setting but force-idle
-	 * causes core_pwrdm not enter idle states at least on OMAP3630.
-	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
-	 * signal when MIDLEMODE is set to force-idle.
-	 */
-	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE |
-			  HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod_class am35xx_usbotg_class = {
-	.name = "am35xx_usbotg",
-};
-
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
-	.name		= "am35x_otg_hs",
-	.main_clk	= "hsotgusb_fck",
-	.class		= &am35xx_usbotg_class,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* MMC/SD/SDIO common */
 static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
 	.rev_offs	= 0x1fc,
@@ -1561,22 +1502,6 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
-	.master		= &omap3xxx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
-	.master		= &am35xx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_core -> sad2d interface */
 static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
 	.master		= &omap3xxx_sad2d_hwmod,
@@ -1758,24 +1683,6 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.user		= OCP_USER_MPU,
 };
 
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.user		= OCP_USER_MPU,
-};
-
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &am35xx_usbhsotg_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* L4_WKUP -> L4_SEC interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
 	.master = &omap3xxx_l4_wkup_hwmod,
@@ -2465,8 +2372,6 @@ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
 	&omap3xxx_l4_core__usb_tll_hs,
@@ -2509,8 +2414,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__dss,
 	&omap36xx_l4_core__sr1,
 	&omap36xx_l4_core__sr2,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_l4_core__mailbox,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
@@ -2528,8 +2431,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&am35xx_usbhsotg__l3,
-	&am35xx_l4_core__usbhsotg,
 	&am35xx_l4_core__uart4,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 37f862f13c8d..8d64cc7edccd 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -3,7 +3,5 @@ menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs"
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
-	select GPIOLIB
 	select NO_IOPORT_MAP
-	select PINCTRL
 	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index e979e2197f8e..5371c824786d 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -90,7 +90,7 @@ static void __init spear_clocksource_init(void)
 		200, 16, clocksource_mmio_readw_up);
 }
 
-static inline void timer_shutdown(struct clock_event_device *evt)
+static inline void spear_timer_shutdown(struct clock_event_device *evt)
 {
 	u16 val = readw(gpt_base + CR(CLKEVT));
 
@@ -101,7 +101,7 @@ static inline void timer_shutdown(struct clock_event_device *evt)
 
 static int spear_shutdown(struct clock_event_device *evt)
 {
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	return 0;
 }
@@ -111,7 +111,7 @@ static int spear_set_oneshot(struct clock_event_device *evt)
 	u16 val;
 
 	/* stop the timer */
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ONE_SHOT;
@@ -126,7 +126,7 @@ static int spear_set_periodic(struct clock_event_device *evt)
 	u16 val;
 
 	/* stop the timer */
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	period = clk_get_rate(gpt_clk) / HZ;
 	period >>= CTRL_PRESCALER16;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e929aaa744c0..7cc0dd8ed991 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
-#include "db8500-regs.h"
 #include "pm_domains.h"
 
 static int __init ux500_l2x0_unlock(void)
diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h
deleted file mode 100644
index 0d47d7171d9b..000000000000
--- a/arch/arm/mach-ux500/db8500-regs.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- */
-
-#ifndef __MACH_DB8500_REGS_H
-#define __MACH_DB8500_REGS_H
-
-/* Base address and bank offsets for ESRAM */
-#define U8500_ESRAM_BASE	0x40000000
-#define U8500_ESRAM_BANK_SIZE	0x00020000
-#define U8500_ESRAM_BANK0	U8500_ESRAM_BASE
-#define U8500_ESRAM_BANK1	(U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/*
- * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
- * reserved for security
- */
-#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
-
-#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-
-/* This address fulfills the 256k alignment requirement of the lcla base */
-#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
-
-#define U8500_PER3_BASE		0x80000000
-#define U8500_STM_BASE		0x80100000
-#define U8500_STM_REG_BASE	(U8500_STM_BASE + 0xF000)
-#define U8500_PER2_BASE		0x80110000
-#define U8500_PER1_BASE		0x80120000
-#define U8500_B2R2_BASE		0x80130000
-#define U8500_HSEM_BASE		0x80140000
-#define U8500_PER4_BASE		0x80150000
-#define U8500_TPIU_BASE		0x80190000
-#define U8500_ICN_BASE		0x81000000
-
-#define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xbf4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001D000
-
-#define U8500_PER6_BASE		0xa03c0000
-#define U8500_PER7_BASE		0xa03d0000
-#define U8500_PER5_BASE		0xa03e0000
-
-#define U8500_SVA_BASE		0xa0100000
-#define U8500_SIA_BASE		0xa0200000
-
-#define U8500_SGA_BASE		0xa0300000
-#define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE		0x801C0000	/* v1 */
-
-#define U8500_SBAG_BASE		0xa0390000
-
-#define U8500_SCU_BASE		0xa0410000
-#define U8500_GIC_CPU_BASE	0xa0410100
-#define U8500_TWD_BASE		0xa0410600
-#define U8500_GIC_DIST_BASE	0xa0411000
-#define U8500_L2CC_BASE		0xa0412000
-
-#define U8500_MODEM_I2C		0xb7e02000
-
-#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
-#define U8500_GPIO1_BASE	(U8500_PER3_BASE + 0xE000)
-#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
-#define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
-
-#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
-
-/* per6 base addresses */
-#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
-#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x4000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x5100)
-#define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
-#define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
-#define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYP0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYP1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
-
-/* per5 base addresses */
-#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
-#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addresses */
-#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
-#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
-#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
-#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x03000)
-#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x04000)
-#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
-#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
-#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
-#define U9540_DMC1_BASE		(U8500_PER4_BASE + 0x0A000)
-#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
-#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
-#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
-#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
-
-/* per3 base addresses */
-#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
-#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
-
-/* per2 base addresses */
-#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
-#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
-#define U8500_MSP3_BASE		(U8500_PER1_BASE + 0x5000)
-#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
-#define U8500_I2C4_BASE		(U8500_PER1_BASE + 0xa000)
-#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xb000)
-#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
-
-#define U8500_SHRM_GOP_INTERRUPT_BASE	0xB7C00040
-
-#define U8500_GPIOBANK0_BASE	U8500_GPIO0_BASE
-#define U8500_GPIOBANK1_BASE	(U8500_GPIO0_BASE + 0x80)
-#define U8500_GPIOBANK2_BASE	U8500_GPIO1_BASE
-#define U8500_GPIOBANK3_BASE	(U8500_GPIO1_BASE + 0x80)
-#define U8500_GPIOBANK4_BASE	(U8500_GPIO1_BASE + 0x100)
-#define U8500_GPIOBANK5_BASE	(U8500_GPIO1_BASE + 0x180)
-#define U8500_GPIOBANK6_BASE	U8500_GPIO2_BASE
-#define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
-#define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
-
-#define U8500_MCDE_SIZE		0x1000
-#define U8500_DSI_LINK_SIZE	0x1000
-#define U8500_DSI_LINK1_BASE	(U8500_MCDE_BASE + U8500_MCDE_SIZE)
-#define U8500_DSI_LINK2_BASE	(U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK3_BASE	(U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK_COUNT	0x3
-
-/* Modem and APE physical addresses */
-#define U8500_MODEM_BASE	0xe000000
-#define U8500_APE_BASE		0x6000000
-
-/* SoC identification number information */
-#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
-
-/* Offsets to specific addresses in some IP blocks for DMA */
-#define MSP_TX_RX_REG_OFFSET	0
-#define CRYP1_RX_REG_OFFSET	0x10
-#define CRYP1_TX_REG_OFFSET	0x8
-#define HASH1_TX_REG_OFFSET	0x4
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL	0xf0000000
-#define U8500_IO_PHYSICAL	0xa0000000
-/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM		IOMEM(0xf0000000)
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x)           \
-	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-/* Used by some plat-nomadik code */
-#define io_p2v(n)		__io_address(n)
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 415d8ad2a3c1..656b58bd296a 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -20,8 +20,6 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include "db8500-regs.h"
-
 /* Magic triggers in backup RAM */
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c
index ff9c375e4277..dc962d006b08 100644
--- a/arch/arm/mach-ux500/pm.c
+++ b/arch/arm/mach-ux500/pm.c
@@ -16,8 +16,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
-#include "db8500-regs.h"
-
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
 #define PRCM_ARM_WFI_STANDBY_WFI0		0x08
@@ -124,7 +122,7 @@ bool prcmu_pending_irq(void)
 }
 
 /*
- * This function checks if the specified cpu is in in WFI. It's usage
+ * This function checks if the specified cpu is in WFI. It's usage
  * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
  * function. Of course passing smp_processor_id() to this function will
  * always return false...
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 46cccd6bf705..de988cba9a4b 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -105,6 +105,19 @@ static inline bool is_write_fault(unsigned int fsr)
 	return (fsr & FSR_WRITE) && !(fsr & FSR_CM);
 }
 
+static inline bool is_translation_fault(unsigned int fsr)
+{
+	int fs = fsr_fs(fsr);
+#ifdef CONFIG_ARM_LPAE
+	if ((fs & FS_MMU_NOLL_MASK) == FS_TRANS_NOLL)
+		return true;
+#else
+	if (fs == FS_L1_TRANS || fs == FS_L2_TRANS)
+		return true;
+#endif
+	return false;
+}
+
 static void die_kernel_fault(const char *msg, struct mm_struct *mm,
 			     unsigned long addr, unsigned int fsr,
 			     struct pt_regs *regs)
@@ -140,7 +153,8 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
 	} else {
-		if (kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
+		if (is_translation_fault(fsr) &&
+		    kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
 			return;
 
 		msg = "paging request";
@@ -208,7 +222,7 @@ static inline bool is_permission_fault(unsigned int fsr)
 {
 	int fs = fsr_fs(fsr);
 #ifdef CONFIG_ARM_LPAE
-	if ((fs & FS_PERM_NOLL_MASK) == FS_PERM_NOLL)
+	if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL)
 		return true;
 #else
 	if (fs == FS_L1_PERM || fs == FS_L2_PERM)
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 83b5ab32d7a4..54927ba1fa6e 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -14,8 +14,9 @@
 
 #ifdef CONFIG_ARM_LPAE
 #define FSR_FS_AEA		17
+#define FS_TRANS_NOLL		0x4
 #define FS_PERM_NOLL		0xC
-#define FS_PERM_NOLL_MASK	0x3C
+#define FS_MMU_NOLL_MASK	0x3C
 
 static inline int fsr_fs(unsigned int fsr)
 {
@@ -23,8 +24,10 @@ static inline int fsr_fs(unsigned int fsr)
 }
 #else
 #define FSR_FS_AEA		22
-#define FS_L1_PERM             0xD
-#define FS_L2_PERM             0xF
+#define FS_L1_TRANS		0x5
+#define FS_L2_TRANS		0x7
+#define FS_L1_PERM		0xD
+#define FS_L2_PERM		0xF
 
 static inline int fsr_fs(unsigned int fsr)
 {
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index c42debaded95..c1494a4dee25 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 93c8ccbf2982..7d59765aef22 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -445,7 +445,7 @@ static int __init xen_guest_init(void)
 		return 0;
 
 	if (IS_ENABLED(CONFIG_XEN_VIRTIO))
-		virtio_set_mem_acc_cb(xen_virtio_mem_acc);
+		virtio_set_mem_acc_cb(xen_virtio_restricted_mem_acc);
 
 	if (!acpi_disabled)
 		xen_acpi_guest_init();
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 505c8a1ccbe0..7fc3457a8891 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARM64
 	def_bool y
+	select ACPI_APMT if ACPI
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_GTDT if ACPI
@@ -31,6 +32,7 @@ config ARM64
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
@@ -117,6 +119,7 @@ config ARM64
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select CRC32
 	select DCACHE_WORD_ACCESS
+	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select DMA_DIRECT_REMAP
 	select EDAC_SUPPORT
 	select FRAME_POINTER
@@ -181,8 +184,10 @@ config ARM64
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
+		if $(cc-option,-fpatchable-function-entry=2)
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
-		if DYNAMIC_FTRACE_WITH_REGS
+		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_FAST_GUP
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -233,16 +238,16 @@ config ARM64
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
-config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
+config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_CLANG
 	# https://github.com/ClangBuiltLinux/linux/issues/1507
 	depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
-	select HAVE_DYNAMIC_FTRACE_WITH_REGS
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
-config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
+config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_GCC
 	depends on $(cc-option,-fpatchable-function-entry=2)
-	select HAVE_DYNAMIC_FTRACE_WITH_REGS
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
 config 64BIT
 	def_bool y
@@ -370,6 +375,9 @@ config KASAN_SHADOW_OFFSET
 	default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
 	default 0xffffffffffffffff
 
+config UNWIND_TABLES
+	bool
+
 source "arch/arm64/Kconfig.platforms"
 
 menu "Kernel Features"
@@ -964,6 +972,22 @@ config ARM64_ERRATUM_2457168
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2645198
+	bool "Cortex-A715: 2645198: Workaround possible [ESR|FAR]_ELx corruption"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A715 erratum 2645198.
+
+	  If a Cortex-A715 cpu sees a page mapping permissions change from executable
+	  to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers on the
+	  next instruction abort caused by permission fault.
+
+	  Only user-space does executable to non-executable permission transition via
+	  mprotect() system call. Workaround the problem by doing a break-before-make
+	  TLB invalidation, for all changes to executable user space mappings.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1714,7 +1738,6 @@ config ARM64_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
-	depends on JUMP_LABEL
 	default y
 	help
 	  As part of the Large System Extensions, ARMv8.1 introduces new
@@ -1816,7 +1839,7 @@ config ARM64_PTR_AUTH_KERNEL
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
 	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
-	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
 	help
 	  If the compiler supports the -mbranch-protection or
 	  -msign-return-address flag (e.g. GCC 7 or later), then this option
@@ -1826,7 +1849,7 @@ config ARM64_PTR_AUTH_KERNEL
 	  disabled with minimal loss of protection.
 
 	  This feature works with FUNCTION_GRAPH_TRACER option only if
-	  DYNAMIC_FTRACE_WITH_REGS is enabled.
+	  DYNAMIC_FTRACE_WITH_ARGS is enabled.
 
 config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
@@ -1924,7 +1947,7 @@ config ARM64_BTI_KERNEL
 	depends on !CC_IS_GCC
 	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
 	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
-	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
 	help
 	  Build the kernel with Branch Target Identification annotations
 	  and enable enforcement of this for kernel code. When this option
@@ -2157,6 +2180,15 @@ config ARCH_NR_GPIO
 
           If unsure, leave the default value.
 
+config UNWIND_PATCH_PAC_INTO_SCS
+	bool "Enable shadow call stack dynamically using code patching"
+	# needs Clang with https://reviews.llvm.org/D111780 incorporated
+	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
+	depends on SHADOW_CALL_STACK
+	select UNWIND_TABLES
+	select DYNAMIC_SCS
+
 endmenu # "Kernel Features"
 
 menu "Boot options"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 76580b932e44..d1970adf80ab 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -252,8 +252,6 @@ config ARCH_REALTEK
 
 config ARCH_RENESAS
 	bool "Renesas SoC Platforms"
-	select GPIOLIB
-	select PINCTRL
 	help
 	  This enables support for the ARMv8 based Renesas SoCs.
 
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5e56d26a2239..d62bd221828f 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -45,8 +45,13 @@ KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
 
 # Avoid generating .eh_frame* sections.
+ifneq ($(CONFIG_UNWIND_TABLES),y)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
 KBUILD_AFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+else
+KBUILD_CFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_AFLAGS	+= -fasynchronous-unwind-tables
+endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
@@ -72,10 +77,16 @@ branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=
 # We enable additional protection for leaf functions as there is some
 # narrow potential for ROP protection benefits and no substantial
 # performance impact has been observed.
+PACRET-y := pac-ret+leaf
+
+# Using a shadow call stack in leaf functions is too costly, so avoid PAC there
+# as well when we may be patching PAC into SCS
+PACRET-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS) := pac-ret
+
 ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
-branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI) := -mbranch-protection=pac-ret+leaf+bti
+branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI) := -mbranch-protection=$(PACRET-y)+bti
 else
-branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=pac-ret+leaf
+branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=$(PACRET-y)
 endif
 # -march=armv8.3-a enables the non-nops instructions for PAC, to avoid the
 # compiler to generate them and consequently to break the single image contract
@@ -128,7 +139,7 @@ endif
 
 CHECKFLAGS	+= -D__aarch64__
 
-ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y)
+ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y)
   KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
   CC_FLAGS_FTRACE := -fpatchable-function-entry=2
 endif
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index 578ef368e2b4..a6b4b87f185d 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -25,16 +25,6 @@
 		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 620cb3ef5f6c..50ed2e9f10ed 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -406,6 +406,20 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 53f6660656ac..ca1d287a0a01 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -161,6 +161,7 @@
 			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
 			clock-names = "bus", "mod";
 			resets = <&ccu RST_BUS_VP9>;
+			iommus = <&iommu 5>;
 		};
 
 		video-codec@1c0e000 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index 02893f3ac99d..cb8600d0ea1e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -49,8 +49,24 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
 };
 
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
 &emac0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
@@ -76,6 +92,10 @@
 	status = "okay";
 };
 
+&ohci1 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -211,3 +231,24 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 6619db34714a..07424c28b696 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -32,6 +32,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -54,6 +62,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,3 +191,12 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 622a1f7d1641..74aed0d232a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -504,6 +504,166 @@
 			};
 		};
 
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		rtc: rtc@7000000 {
 			compatible = "allwinner,sun50i-h616-rtc";
 			reg = <0x07000000 0x400>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 14c220d87807..55c5e1fdddc7 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -309,6 +309,7 @@
 				 <&clkmgr STRATIX10_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 48424e459f12..17752ca743e5 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -22,17 +22,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
@@ -105,6 +105,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 847a7c01f5af..ede99dcc0558 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -22,17 +22,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e213aeebb774..97b42e2100e0 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index b4000cf65a9a..d2f7cb4e5375 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -36,6 +36,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04f797b5a012..1648e67afbb6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -105,6 +105,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..9dbd50820b1c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1705,6 +1705,12 @@
 			};
 		};
 
+		pmu: pmu@ff638000 {
+			reg = <0x0 0xff638000 0x0 0x100>,
+			      <0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		aobus: bus@ff800000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff800000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..7677764eeee6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -50,6 +50,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -133,3 +134,7 @@
 		};
 	};
 };
+
+&pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
new file mode 100644
index 000000000000..1e40709610c5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-GO-Ultra";
+
+	aliases {
+		serial0 = &uart_AO;
+		rtc0 = &vrtc;
+	};
+
+	adc-joystick-left {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 2>, <&saradc 3>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_Y>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_X>;
+			abs-range = <700 2900>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	adc-joystick-right {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_RY>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_RX>;
+			abs-range = <800 3000>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	codec_clk: codec-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+		clock-output-names = "codec_clk";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <10>;
+		pinctrl-0 = <&keypad_gpio_pins>;
+		pinctrl-names = "default";
+
+		volume-up-button {
+			label = "VOLUME-UP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
+		};
+		volume-down-button {
+			label = "VOLUME-DOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
+		};
+		dpad-up-button {
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
+		};
+		dpad-down-button {
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
+		};
+		dpad-left-button {
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
+		};
+		dpad-right-button {
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
+		};
+		a-button {
+			label = "A";
+			linux,code = <BTN_EAST>;
+			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
+		};
+		b-button {
+			label = "B";
+			linux,code = <BTN_SOUTH>;
+			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
+		};
+		y-button {
+			label = "Y";
+			linux,code = <BTN_WEST>;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		};
+		x-button {
+			label = "X";
+			linux,code = <BTN_NORTH>;
+			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		};
+		f1-button {
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
+		};
+		f2-button {
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+		};
+		f3-button {
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
+		};
+		f4-button {
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
+		};
+		f5-button {
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
+		};
+		f6-button {
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		};
+		top-left-button {
+			label = "TOP Left";
+			linux,code = <BTN_TL>;
+			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
+		};
+		top-left2-button {
+			label = "TOP Left 2";
+			linux,code = <BTN_TL2>;
+			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+		};
+		top-right-button {
+			label = "TOP Right";
+			linux,code = <BTN_TR>;
+			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
+		};
+		top-right2-button {
+			label = "TOP Right 2";
+			linux,code = <BTN_TR2>;
+			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_sys: regulator-vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "Odroid GO Ultra";
+		audio-widgets = "Microphone", "Mic Jack",
+				"Headphone", "Headphones",
+				"Speaker", "Internal Speakers";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
+		audio-routing =	"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"MICL", "Mic Jack",
+				"Headphones", "HPOL",
+				"Headphones", "HPOR",
+				"Speaker Amplifier INL", "HPOL",
+				"Speaker Amplifier INR", "HPOR",
+				"Internal Speakers", "Speaker Amplifier OUTL",
+				"Internal Speakers", "Speaker Amplifier OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rk817>;
+			};
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&hp_5v>;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+/* RK817 only supports 12.5mV steps, round up the values */
+&cpu_opp_table_0 {
+	opp-1000000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <762500>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <837500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1896000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1992000000 {
+		opp-microvolt = <1012500>;
+	};
+};
+
+/* RK818 only supports 12.5mV steps, round up the values */
+&cpub_opp_table_1 {
+	opp-1000000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <825000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <900000>;
+	};
+	opp-1800000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1908000000 {
+		opp-microvolt = <1025000>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vcc_2v3>;
+		vcc8-supply = <&vcc_2v3>;
+		vcc9-supply = <&vddao_3v3>;
+		boost-supply = <&vdd_sys>;
+		switch-supply = <&vdd_sys>;
+
+		regulators {
+			vddcpu_a: DCDC_REG1 {
+				regulator-name = "vddcpu_a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <775000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <775000>;
+				};
+			};
+
+			vdd_ee: DCDC_REG2 {
+				regulator-name = "vdd_ee";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <875000>;
+				};
+			};
+
+			vddq_1v1: DCDC_REG3 {
+				regulator-name = "vddq_1v1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vddao_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddao_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			hp_5v: DCDC_BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "hp_5v";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddio_ao1v8: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddio_ao1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddq_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddq_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddio_c: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddio_c";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_intc>;
+
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc5-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_sys>;
+		vcc8-supply = <&vdd_sys>;
+		vcc9-supply = <&rk817_boost>;
+
+		#sound-dai-cells = <0>;
+		clocks = <&codec_clk>;
+		clock-names = "mclk";
+
+		#clock-cells = <1>;
+
+		regulators {
+			vddcpu_b: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <737500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vddcpu_b";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v3: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_2v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			rk817_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "rk817_boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			usb_host: OTG_SWITCH {
+				regulator-name = "usb_host";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&periphs_pinctrl {
+	keypad_gpio_pins: keypad-gpio {
+		mux {
+			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
+			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
+				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
+				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_c>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+	phy-supply = <&usb_host>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index fd3fa82e4c33..667d2b774924 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -39,6 +39,14 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -410,6 +418,40 @@
 	clock-latency = <50000>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ddr_thermal {
+	trips {
+		ddr_active: ddr-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&ddr_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..75ff00fb2e4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -105,6 +105,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 };
@@ -139,3 +140,7 @@
 &mali {
 	dma-coherent;
 };
+
+&pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 023a52005494..e3c12e0be99d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -132,6 +132,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 7c029f552a23..923d2d8bbb9c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -427,6 +427,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 6ab1cc125b96..202deb4e2d63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -140,7 +140,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84..04e9d0f1bde0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -429,6 +429,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index f43c45daf7eb..b21172ece1fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -270,7 +270,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
index b8ef3bd8b840..1703da3235ea 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -89,7 +89,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		wakeup-source;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..56ca0ba2241e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -88,6 +88,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -520,6 +521,10 @@
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
 
+&pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
+
 &pwrc {
 	compatible = "amlogic,meson-sm1-pwrc";
 };
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index c0510c25ca6a..5a7506ff5ea3 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -4,3 +4,9 @@ dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j456.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j457.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j314s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j314c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
diff --git a/arch/arm64/boot/dts/apple/multi-die-cpp.h b/arch/arm64/boot/dts/apple/multi-die-cpp.h
new file mode 100644
index 000000000000..39e8953bf809
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/multi-die-cpp.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT
+ *
+ * C preprocessor macros for t600x multi die support.
+ */
+
+#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
+#define __DTS_APPLE_MULTI_DIE_CPP_H
+
+#ifndef __stringify
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+#endif
+
+#ifndef __concat
+#define __concat_1(x, y...)     x ## y
+#define __concat(x, y...)       __concat_1(x, y)
+#endif
+
+#define DIE_NODE(a) __concat(a, DIE)
+#define DIE_LABEL(a) __stringify(__concat(a, DIE))
+
+#endif /* !__DTS_APPLE_MULTI_DIE_CPP_H */
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
new file mode 100644
index 000000000000..c9e192848fe3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Pro, 2021)
+ *
+ * target-type: J314s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
new file mode 100644
index 000000000000..ff1803ce2300
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Pro, 2021)
+ *
+ * target-type: J316s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
new file mode 100644
index 000000000000..89c3b211b116
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6000 "M1 Pro" SoC
+ *
+ * Other names: H13J, "Jade Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
+
+#include "t6001.dtsi"
+
+/ {
+	compatible = "apple,t6000", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
new file mode 100644
index 000000000000..1761d15b98c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Max, 2021)
+ *
+ * target-type: J314c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
new file mode 100644
index 000000000000..750e9beeffc0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Max, 2021)
+ *
+ * target-type: J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
new file mode 100644
index 000000000000..62ea437b58b2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Max, 2022)
+ *
+ * target-type: J375c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Max, 2022)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
new file mode 100644
index 000000000000..620b17e4031f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6001 "M1 Max" SoC
+ *
+ * Other names: H13J, "Jade"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6001", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-gpio-pins.dtsi"
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
new file mode 100644
index 000000000000..3365429bdc8b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Ultra, 2022)
+ *
+ * target-type: J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6002.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375d", "apple,t6002", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Ultra, 2022)";
+};
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* delete unused always-on power-domains on die 1 */
+
+/delete-node/ &ps_atc2_usb_aon_die1;
+/delete-node/ &ps_atc2_usb_die1;
+
+/delete-node/ &ps_atc3_usb_aon_die1;
+/delete-node/ &ps_atc3_usb_die1;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
new file mode 100644
index 000000000000..a963a5011799
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6002 "M1 Ultra" SoC
+ *
+ * Other names: H13J, "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6002", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x2 0x0 0x4 0x0>,
+			 <0x5 0x80000000 0x5 0x80000000 0x1 0x80000000>,
+			 <0x7 0x0 0x7 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
+			 <0x7 0x0 0x27 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+#include "t600x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01
+				&cpu_e10 &cpu_e11>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6002, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
new file mode 100644
index 000000000000..fa8ead699363
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Apple T6000 / T6001 / T6002 "M1 Pro/Max/Ultra" SoC
+ *
+ * Other names: H13J, "Jade Chop", "Jade", "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	icestorm_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <23000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <40000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	firestorm_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <19000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1524000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1980000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2448000000>;
+			opp-level = <9>;
+			clock-latency-ns = <49000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2676000000>;
+			opp-level = <10>;
+			clock-latency-ns = <53000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2904000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3036000000>;
+			opp-level = <12>;
+			clock-latency-ns = <56000>;
+		};
+		/* Not available until CPU deep sleep is implemented
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3168000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3228000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		*/
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
new file mode 100644
index 000000000000..1c41954e3899
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
+ * Apple T6000 / T6001 "M1 Pro" / "M1 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6000-nco", "apple,nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6000-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x4>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	pinctrl_smc: pinctrl@290820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x90820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wdt: watchdog@2922b0000 {
+		compatible = "apple,t6000-wdt", "apple,wdt";
+		reg = <0x2 0x922b0000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart_0: iommu@39b004000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b004000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	sio_dart_1: iommu@39b008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x1000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6000-admac", "apple,admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6000-mca", "apple,mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	pcie0_dart_0: iommu@581008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x81008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@582008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x82008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_2: iommu@583008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x83008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_3: iommu@584008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x84008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0: pcie@590000000 {
+		compatible = "apple,t6000-pcie", "apple,pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x90000000 0x0 0x1000000>,
+			<0x5 0x80000000 0x0 0x100000>,
+			<0x5 0x81000000 0x0 0x4000>,
+			<0x5 0x82000000 0x0 0x4000>,
+			<0x5 0x83000000 0x0 0x4000>,
+			<0x5 0x84000000 0x0 0x4000>;
+		reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
+
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+		};
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-dieX.dtsi b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
new file mode 100644
index 000000000000..a32ff0c9d7b0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on both dies on the Apple T6002 "M1 Ultra" and present on
+ * Apple T6000/T6001 "M1 Pro/Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x4000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@28e580000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e580000 0 0xc000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@2921f0000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x921f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 16>;
+		apple,npins = <16>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 623 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 624 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 625 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 626 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 627 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 628 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 629 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@292280000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x92280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@293820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x93820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 63>;
+		apple,npins = <63>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 567 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 568 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 569 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 570 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 571 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 572 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 573 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 427 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 428 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 429 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 430 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 431 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 432 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 433 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
new file mode 100644
index 000000000000..b31f1a7a2b3f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(92, 1)>,
+			<APPLE_PINMUX(93, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(94, 1)>,
+			<APPLE_PINMUX(95, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(96, 1)>,
+			<APPLE_PINMUX(97, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(98, 1)>,
+			<APPLE_PINMUX(99, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(8, 1)>,
+			<APPLE_PINMUX(9, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(100, 1)>,
+			<APPLE_PINMUX(101, 1)>;
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
new file mode 100644
index 000000000000..34906d522f0a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2021)
+ *
+ * This file contains the parts common to J314 and J316 devices with both t6000 and t6001.
+ *
+ * target-type: J314s / J314c / J316s / J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&pcie0_dart_2 {
+	status = "disabled";
+};
+
+&pcie0_dart_3 {
+	status = "disabled";
+};
+
+/delete-node/ &port02;
+/delete-node/ &port03;
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
new file mode 100644
index 000000000000..00d3a9447c89
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (2022)
+ *
+ * This file contains the parts common to J375 devices with both t6001 and t6002.
+ *
+ * target-type: J375c / J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-nvme.dtsi b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
new file mode 100644
index 000000000000..7dff738d317e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@38f408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x8f408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1069 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1070 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1071 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1072 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@393c50000 {
+		compatible = "apple,t6000-sart";
+		reg = <0x3 0x93c50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@393cc0000 {
+		compatible = "apple,t6000-nvme-ans2", "apple,nvme-ans2";
+		reg = <0x3 0x93cc0000 0x0 0x40000>, <0x3 0x8f400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die */
+		interrupts = <AIC_IRQ 0 1613 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
new file mode 100644
index 000000000000..0bd44753b76a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
@@ -0,0 +1,2012 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T6001 "M1 Max" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_pms_bridge): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_pms)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_pcie0_ref): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie0_ref);
+	};
+
+	DIE_NODE(ps_pcie1_ref): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie1_ref);
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_pcie1_ref)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_pcie0_ref)>;
+	};
+
+	DIE_NODE(ps_devc0_ivdmc): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(devc0_ivdmc);
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afi): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afc): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afr): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_c0_usb31drd): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usb31drd): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+	};
+
+	DIE_NODE(ps_ane_sys_cpu): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+#if DIE_NO == 0
+	/* PMP is only present on die 0 of the M1 Ultra */
+	DIE_NODE(ps_pmp): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+#endif
+
+	DIE_NODE(ps_pms_sram): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_usb): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(usb);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>, <&DIE_NODE(ps_apcie_gp)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@330 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@338 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@340 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@348 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@358 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@360 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_c0_usbctl): power-controller@368 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usbctl): power-controller@370 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart1): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart7): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart7);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@278 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@288 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@290 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@298 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@2a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@2b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@2b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@2c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@2d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@308 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@310 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispdfr_fe): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_dispdfr_be): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_be);
+		power-domains = <&DIE_NODE(ps_dispdfr_fe)>;
+	};
+
+	DIE_NODE(ps_mipi_dsi): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mipi_dsi);
+		power-domains = <&DIE_NODE(ps_dispdfr_be)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		/*
+		 * The ADT makes ps_apcie_st[1]_sys depend on ps_ans2 instead,
+		 * but we'd rather have a single power domain for the downstream
+		 * device to depend on, so use this node as the child.
+		 * This makes more sense anyway (since ANS2 uses APCIE_ST).
+		 */
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@3c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+	};
+
+	DIE_NODE(ps_msr1): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	/* Seems to be disabled on shipping hardware */
+#if 0
+	DIE_NODE(ps_ane1_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>;
+	};
+
+	DIE_NODE(ps_ane1_sys_cpu): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane1_sys)>;
+	};
+#endif
+
+	DIE_NODE(ps_venc1_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe4)>, <&DIE_NODE(ps_venc1_pipe5)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@88 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@90 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@98 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_gp_usb_aon): power-controller@a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gp_usb_aon);
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_usb): power-controller@c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_usb);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_debug_auth): power-controller@c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_auth);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_usb_aon)>, <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_usb_aon)>, <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_usb_aon)>, <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_usb_aon)>, <&DIE_NODE(ps_atc3_common)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 8c6bf9592510..83bb4dc32af9 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -14,7 +14,7 @@
 
 / {
 	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 4x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index fe7c0aaf7d62..67e433d5f8ba 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -14,7 +14,7 @@
 
 / {
 	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 2x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 3d15b8e2a6c1..9706d26f9c64 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -78,3 +78,7 @@
 		apple,antenna-sku = "XX";
 	};
 };
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
index a6dbb1f485d8..9645861a858c 100644
--- a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -339,7 +339,7 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "sio_adma";
-		power-domains = <&ps_sio>, <&ps_pms>;
+		power-domains = <&ps_sio>, <&ps_pms>, <&ps_audio_p>;
 	};
 
 	ps_aes: power-controller@238 {
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 51a63b29d404..9859219699f4 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -22,69 +22,279 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu1: cpu@1 {
+		cpu_e1: cpu@1 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu2: cpu@2 {
+		cpu_e2: cpu@2 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu3: cpu@3 {
+		cpu_e3: cpu@3 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu4: cpu@10100 {
+		cpu_p0: cpu@10100 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu5: cpu@10101 {
+		cpu_p1: cpu@10101 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu6: cpu@10102 {
+		cpu_p2: cpu@10102 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10102>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu7: cpu@10103 {
+		cpu_p3: cpu@10103 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10103>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
 		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
 	};
 
 	timer {
@@ -116,6 +326,16 @@
 		clock-output-names = "clkref";
 	};
 
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -124,6 +344,27 @@
 		ranges;
 		nonposted-mmio;
 
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
 		i2c0: i2c@235010000 {
 			compatible = "apple,t8103-i2c", "apple,i2c";
 			reg = <0x2 0x35010000 0x0 0x4000>;
@@ -219,6 +460,61 @@
 			status = "disabled";
 		};
 
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8103-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8103-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 619 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 621 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 624 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				"tx1a", "rx1a", "tx1b", "rx1b",
+				"tx2a", "rx2a", "tx2b", "rx2b",
+				"tx3a", "rx3a", "tx3b", "rx3b",
+				"tx4a", "rx4a", "tx4b", "rx4b",
+				"tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8103-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
 		aic: interrupt-controller@23b100000 {
 			compatible = "apple,t8103-aic", "apple,aic";
 			#interrupt-cells = <3>;
@@ -229,12 +525,12 @@
 			affinities {
 				e-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_E>;
-					cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
 				};
 
 				p-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_P>;
-					cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
 				};
 			};
 		};
@@ -412,7 +708,7 @@
 			resets = <&ps_ans2>;
 		};
 
-		pcie0_dart_0: dart@681008000 {
+		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -421,7 +717,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_1: dart@682008000 {
+		pcie0_dart_1: iommu@682008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x82008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -430,7 +726,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_2: dart@683008000 {
+		pcie0_dart_2: iommu@683008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x83008000 0x0 0x4000>;
 			#iommu-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
index 4e46826f883a..21f1f952e985 100644
--- a/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -53,6 +53,7 @@
 
 	L2_0: l2-cache0 {
 		compatible = "cache";
+		cache-unified;
 		cache-level = <2>;
 		cache-size = <0x80000>;
 		cache-line-size = <64>;
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 83e3e7e3984f..029578072d8f 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -58,6 +58,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -84,6 +85,11 @@
 			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	watchdog@2a440000 {
 		compatible = "arm,sbsa-gwdt";
 		reg = <0x0 0x2a440000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 5f6f30c801a7..60472d65a355 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -47,48 +47,121 @@
 			compatible = "arm,armv8";
 			reg = <0x0 0x000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		C0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		C1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 6451c62146fd..1d90eeebb37d 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -189,6 +189,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -197,6 +198,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index 438cd1ff4bd0..d2ada69b0a43 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -195,6 +195,7 @@
 
 		A72_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -203,6 +204,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index cf4a58211399..5e48a01a5b9f 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -194,6 +194,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -202,6 +203,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 258991ad7cc0..ef68f5aae7dd 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -71,6 +71,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 5b6d9d8e934d..796cd7d02eb5 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -57,6 +57,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index dac9d3b4e91d..eb2a78f4e033 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -63,6 +63,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -283,6 +284,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
 			watchdog@28 {
 				compatible = "brcm,bcm6345-wdt";
 				reg = <0x28 0x8>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index 3d016c2ce675..d5bc31980f03 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 04de96bd0a03..6f805266d3c9 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 13629702f70b..b982249b80a2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index c3e6197be808..a996d436e977 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -51,6 +51,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 0bce6497219f..62c530d4b103 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -35,6 +35,7 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 29a880c6c858..34c7b513d363 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -50,6 +50,7 @@
 		};
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -109,6 +110,25 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x62000>;
 
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index e34172e3117e..fbf0392b8371 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -52,7 +52,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index 7bf26f3e36bf..699f7742ce7f 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index fda97c47f4e9..18cdbc20f03f 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -79,6 +79,7 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 8f8c25e51194..e05901abe957 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -108,18 +108,22 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER1_L2: l2-cache@100 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER2_L2: l2-cache@200 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER3_L2: l2-cache@300 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 3ea9edc87909..ef6f364eaa18 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -57,10 +57,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
index f826392c23fa..f826392c23fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
index b949cac03742..b949cac03742 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
index 1dff68d7484b..1dff68d7484b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
index 19424d349713..19424d349713 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
index fb85847f778f..fb85847f778f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
index 63e46fad22bd..63e46fad22bd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index ac1c3a7e5f7a..1b33cabb4e14 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -46,6 +46,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 704f72caddd3..b9fd24cdc919 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -84,6 +84,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3d9e29824bb2..a01e3cfec77f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -79,6 +79,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index a2cadf757148..1e5d76c4d83d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -95,18 +95,22 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	CPU_PW20: cpu-pw20 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index c3dc38188c17..c12c86915ec8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -95,18 +95,22 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
 	};
 
 	CPU_PW20: cpu-pw20 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 8c76d86cb756..50c19e8405d5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -300,6 +300,7 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -308,6 +309,7 @@
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -316,6 +318,7 @@
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -324,6 +327,7 @@
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -332,6 +336,7 @@
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -340,6 +345,7 @@
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -348,6 +354,7 @@
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -356,6 +363,7 @@
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 10370d1a6c6d..4852760adeee 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -34,6 +34,35 @@ conn_subsys: bus@5b000000 {
 		clock-output-names = "conn_ipg_clk";
 	};
 
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx7ulp-usb";
+		reg = <0x5b0d0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg 0>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
+	};
+
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0d0200 0x200>;
+	};
+
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx7ulp-usbphy";
+		reg = <0x5b100000 0x1000>;
+		clocks = <&usb2_lpcg 1>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
+	};
+
 	usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
@@ -195,4 +224,14 @@ conn_subsys: bus@5b000000 {
 				     "enet1_lpcg_ipg_s_clk";
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index d7b4229bb4a2..a943a1e2797f 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -20,6 +20,70 @@ dma_subsys: bus@5a000000 {
 		clock-output-names = "dma_ipg_clk";
 	};
 
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <20000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
 		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,6 +124,54 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
 	uart0_lpcg: clock-controller@5a460000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a460000 0x10000>;
@@ -156,6 +268,34 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	adc0: adc@5a880000 {
+		compatible = "nxp,imx8qxp-adc";
+		reg = <0x5a880000 0x10000>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc0_lpcg 0>,
+			 <&adc0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+		status = "disabled";
+	 };
+
+	adc1: adc@5a890000 {
+		compatible = "nxp,imx8qxp-adc";
+		reg = <0x5a890000 0x10000>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc1_lpcg 0>,
+			 <&adc1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+		status = "disabled";
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
@@ -203,4 +343,28 @@ dma_subsys: bus@5a000000 {
 				     "i2c3_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_I2C_3>;
 	};
+
+	adc0_lpcg: clock-controller@5ac80000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac80000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc0_lpcg_clk",
+				     "adc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+	};
+
+	adc1_lpcg: clock-controller@5ac90000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac90000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc1_lpcg_clk",
+				     "adc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 6446e6df7a9a..1f3d225e64ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
 
 	lsio_mem_clk: clock-lsio-mem {
 		compatible = "fixed-clock";
@@ -107,6 +108,20 @@ lsio_subsys: bus@5d000000 {
 		power-domains = <&pd IMX_SC_R_GPIO_7>;
 	};
 
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi", "fspi_en";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
 	lsio_mu0: mailbox@5d1b0000 {
 		reg = <0x5d1b0000 0x10000>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index ca2a43e0cbf6..280a9c9d8bd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -90,6 +90,28 @@
 		enable-active-high;
 		off-on-delay-us = <3480>;
 	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
 };
 
 &eqos {
@@ -159,6 +181,23 @@
 	};
 };
 
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -266,6 +305,40 @@
 	};
 };
 
+&usbphy1 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <114>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy2 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <111>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -286,6 +359,21 @@
 	status = "okay";
 };
 
+&lpspi3 {
+	fsl,spi-num-chipselects = <1>;
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -330,6 +418,25 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index 795d1d472fae..6881330ab4c6 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -11,6 +11,10 @@
 	clock-frequency = <160000000>;
 };
 
+&adc0 {
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -50,3 +54,19 @@
 	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&lpspi0 {
+	interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi1 {
+	interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi2 {
+	interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi3 {
+	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 69c4849f2132..6b416fb760d5 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -140,3 +140,13 @@
 	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usbotg1 {
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	/*
+	 * usbotg1 and usbotg2 share one clock
+	 * scfw disable clock access and keep it always on
+	 * in case other core (M4) use one of these.
+	 */
+	clocks = <&clk_dummy>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
index 815bd987b09b..5f4f789e4a73 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -3,44 +3,90 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &lsio_gpio0 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 47 13>,
+		      <&iomuxc 13 61 4>,
+		      <&iomuxc 19 67 4>,
+		      <&iomuxc 24 72 1>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 4 74 5>,
+		      <&iomuxc 9 80 16>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 1 98 2>,
+		      <&iomuxc 3 101 1>,
+		      <&iomuxc 5 107 8>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 115 4>,
+		      <&iomuxc 9 121 1>,
+		      <&iomuxc 10 120 1>,
+		      <&iomuxc 11 123 1>,
+		      <&iomuxc 12 122 1>,
+		      <&iomuxc 13 125 1>,
+		      <&iomuxc 14 124 1>,
+		      <&iomuxc 16 126 1>,
+		      <&iomuxc 17 128 1>,
+		      <&iomuxc 18 131 1>,
+		      <&iomuxc 19 130 1>,
+		      <&iomuxc 20 133 1>,
+		      <&iomuxc 21 132 1>,
+		      <&iomuxc 22 129 1>,
+		      <&iomuxc 23 134 1>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 12>,
+		      <&iomuxc 19 22 2>,
+		      <&iomuxc 21 25 2>,
+		      <&iomuxc 29 29 3>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 32 3>,
+		      <&iomuxc 3 36 6>,
+		      <&iomuxc 9 43 3>;
 };
 
 &lsio_gpio6 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 53 7>,
+		      <&iomuxc 8 86 10>,
+		      <&iomuxc 19 107 8>;
 };
 
 &lsio_gpio7 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 8 22 2>,
+		      <&iomuxc 10 25 2>,
+		      <&iomuxc 16 44 2>;
 };
 
 &lsio_mu0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 5ddbda0b4def..0c64b9194621 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -59,6 +59,7 @@
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -133,6 +134,12 @@
 			clock-names = "xtal_32KHz", "xtal_24Mhz";
 		};
 
+		scu_gpio: gpio {
+			compatible = "fsl,imx8qxp-sc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		iomuxc: pinctrl {
 			compatible = "fsl,imx8dxl-iomuxc";
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index cf07987ccc10..201325f566cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -47,15 +47,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index 778bdbe228d3..24f61db33eba 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -46,6 +46,12 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_xtal32k: clk-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	panel: panel {
 		backlight = <&backlight>;
 		power-supply = <&reg_panel_vcc>;
@@ -77,12 +83,11 @@
 		enable-active-high;
 	};
 
-	watchdog-gpio {
+	watchdog {
 		/* TPS3813 */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_watchdog_gpio>;
 		compatible = "linux,wdt-gpio";
-		always-enabled;
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		hw_algo = "level";
 		/* Reset triggers in 2..3 seconds */
@@ -114,15 +119,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -183,8 +188,6 @@
 			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <10000>;
-			qca,clk-out-frequency = <125000000>;
-			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
 			qca,keep-pll-enabled;
 			vddio-supply = <&vddio>;
 
@@ -271,6 +274,9 @@
 	pmic: pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		#clock-cells = <0>;
+		clocks = <&clk_xtal32k 0>;
+		clock-output-names = "clk-32k-out";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
@@ -928,6 +934,10 @@
 	status = "disabled";
 };
 
+&snvs_rtc {
+	clocks = <&pmic>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index a2b24d4d4e3e..b68954bcc383 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -23,15 +23,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7d6317d95b13..e0b604ac0da4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -56,6 +56,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
@@ -343,6 +344,7 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
@@ -399,6 +401,10 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 000000000000..055faae79930
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 000000000000..44e87b1568e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 8d10f5b41297..5172883717d1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -47,11 +47,11 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 0679728d2489..1f8326613ee9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -46,11 +46,11 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
new file mode 100644
index 000000000000..e9447738b104
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 995b44efb1b6..92616bc4f71f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -53,15 +53,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 7e0aeb2db305..a0aeac619929 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -34,11 +34,25 @@
 		off-on-delay-us = <12000>;
 	};
 
-	extcon_usbotg1: extcon-usbotg1 {
-		compatible = "linux,extcon-usb-gpio";
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1_extcon>;
-		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 };
 
@@ -105,13 +119,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
-	extcon = <&extcon_usbotg1>;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
 	power-active-high;
 	over-current-active-low;
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 &usbotg2 {
@@ -231,7 +251,7 @@
 			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
-	pinctrl_usb1_extcon: usb1-extcongrp {
+	pinctrl_usb1_connector: usb1-connectorgrp {
 		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index a0bd540f27d3..ae0721b807e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -53,15 +53,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 66a0d103c90f..9e7d38872157 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -81,15 +81,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -119,8 +119,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -365,8 +368,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	eeprom@52 {
@@ -435,6 +441,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -442,6 +455,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
index 4eaf8aabcbff..4eaf8aabcbff 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
index 3ea73a6886ff..3ea73a6886ff 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
index c3cd9f2b0db3..c3cd9f2b0db3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
index cc0a287226ab..cc0a287226ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
index f3ece4b7fbbd..f3ece4b7fbbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
index 2fa635e1c1a8..2fa635e1c1a8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
index 3e6404340d52..3e6404340d52 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
index 2c71ab9854cb..2c71ab9854cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index d3ee6fc4baab..750a1f07ecb7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -248,15 +248,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -326,8 +326,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -477,8 +480,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -600,8 +606,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	leds_gpio: gpio@20 {
@@ -673,8 +682,11 @@
 
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -852,6 +864,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -859,6 +878,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -866,6 +892,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -873,6 +906,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 31f4c735fe4f..32872b0b1aaf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -198,15 +198,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -261,7 +261,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -283,7 +283,8 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
-		"", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+		"lte_pwr#", "lte_rst", "lte_int", "",
+		"amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -298,8 +299,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -566,8 +570,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -585,16 +592,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -738,14 +751,19 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
 			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
 			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
 			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x40000041 /* AMP_GPIO4 */
 			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -779,8 +797,6 @@
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -797,6 +813,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -804,6 +827,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -811,6 +841,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -818,6 +855,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 19f6d2943d26..8ce562246a08 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -207,15 +207,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -265,8 +265,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -397,8 +400,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -520,8 +526,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -681,6 +690,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -688,6 +704,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -695,6 +718,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index a67771d02146..eceed9816f5d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -266,15 +266,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -315,8 +315,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -441,8 +444,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -564,8 +570,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -582,8 +591,11 @@
 
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gpioled: gpio@27 {
@@ -738,6 +750,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -745,6 +764,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -752,6 +778,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -759,6 +792,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_pcie0: pciegrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index bcab830c6e95..0d454e0e2f7c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -3,8 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -183,15 +183,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -610,7 +610,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio3>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -653,7 +653,8 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	assigned-clock-rates = <10000000>, <250000000>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>,
 		 <&clk IMX8MM_CLK_PCIE1_PHY>;
 	clock-names = "pcie", "pcie_aux", "pcie_bus";
 	pinctrl-names = "default";
@@ -664,6 +665,7 @@
 
 &pcie_phy {
 	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
 	fsl,clkreq-unsupported;
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
 	fsl,tx-deemph-gen1 = <0x2d>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index dabd94dc30c4..4ee89fdcf59b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -139,6 +139,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -575,9 +576,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mm-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -1244,10 +1246,10 @@
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 1133cded9be2..8a4369d38903 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -55,15 +55,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index d8ce217c6016..5110d59b719f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -35,15 +35,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-600M {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 4eb467df5ba7..4839a962a170 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -47,6 +47,7 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <750000>;
 			};
 
 			buck2: BUCK2 {
@@ -56,8 +57,6 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
-				nxp,dvs-standby-voltage = <850000>;
 			};
 
 			buck4: BUCK4{
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 261c36540079..8fef980c4ab2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -36,6 +36,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 
@@ -159,8 +160,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	ptn5110: tcpc@50 {
@@ -195,8 +199,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	pca6416: gpio@20 {
@@ -240,6 +247,15 @@
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -255,6 +271,10 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -369,6 +389,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2grp-gpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -376,6 +403,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3grp-gpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
@@ -419,6 +453,15 @@
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index dd4302ac1de4..b9444e4a3d2d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -189,15 +189,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -256,7 +256,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -278,7 +278,7 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -297,8 +297,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -565,8 +568,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -584,16 +590,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -689,10 +701,12 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -726,8 +740,6 @@
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -744,6 +756,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -751,6 +770,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -758,6 +784,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -765,6 +798,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ad0b99adf691..b7d91df71cc2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -139,6 +139,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -576,10 +577,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -1102,7 +1103,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 0f13ee362771..6e1192e751f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -427,6 +427,24 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	uart-has-rtscts;
 	status = "okay";
+
+	/*
+	 * PLL3 at 320 MHz supplies UART2 root with 64 MHz clock,
+	 * which with 16x oversampling yields 4 Mbdps baud base,
+	 * which is exactly the maximum rate supported by muRata
+	 * 2AE bluetooth UART.
+	 */
+	assigned-clocks = <&clk IMX8MP_SYS_PLL3>, <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_SYS_PLL3_OUT>;
+	assigned-clock-rates = <320000000>, <64000000>;
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart2_bt>;
+		compatible = "cypress,cyw4373a0-bt";
+		shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+	};
 };
 
 &uart3 {
@@ -849,6 +867,13 @@
 		>;
 	};
 
+	pinctrl_uart2_bt: dhcom-uart2-bt-grp {
+		fsl,pins = <
+			/* BT_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
+		>;
+	};
+
 	pinctrl_uart3: dhcom-uart3-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x49
@@ -886,8 +911,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
@@ -901,8 +924,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
@@ -916,8 +937,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
 			/* WL_REG_EN */
 			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 9f1469db554d..d4c7ca16abd0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -85,6 +85,20 @@
 	};
 };
 
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
 &A53_0 {
 	cpu-supply = <&reg_arm>;
 };
@@ -317,6 +331,13 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -390,10 +411,37 @@
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 {
 	/* console */
 	pinctrl-names = "default";
@@ -416,6 +464,15 @@
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
 	assigned-clock-rates = <400000000>;
@@ -515,6 +572,17 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
 	pinctrl_gpio_led: gpioledgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
@@ -528,6 +596,13 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -544,14 +619,14 @@
 
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open drain, pull up */
-			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x40
 		>;
 	};
 
 	pinctrl_pcie0_reg: pcie0reggrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
 		>;
 	};
 
@@ -567,12 +642,39 @@
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -586,6 +688,15 @@
 		>;
 	};
 
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 7bf6f81e87b4..6357f3d96ccd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mp-tqma8mpql.dtsi"
 
@@ -48,6 +49,27 @@
 		status = "disabled";
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -108,6 +130,18 @@
 		status = "disabled";
 	};
 
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -165,6 +199,47 @@
 			linux,cma-default;
 		};
 	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
 };
 
 &ecspi1 {
@@ -340,9 +415,16 @@
 			  "", "", "", "",
 			  "", "", "", "",
 			  "", "", "DP_IRQ", "DSI_EN",
-			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
 			  "", "", "", "FAN_PWR",
 			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
 };
 
 &gpio5 {
@@ -377,6 +459,13 @@
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c4 {
@@ -407,6 +496,25 @@
 	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
@@ -461,11 +569,23 @@
 	status = "okay";
 };
 
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb3_phy0 {
 	vbus-supply = <&reg_vcc_5v0>;
 	status = "okay";
 };
 
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
 &usb_dwc3_0 {
 	/* dual role is implemented, but not a full featured OTG */
 	hnp-disable;
@@ -486,6 +606,31 @@
 	};
 };
 
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -685,10 +830,18 @@
 		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
 	};
 
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
 	pinctrl_reg12v0: reg12v0grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
 	};
 
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
 	/* X61 */
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
@@ -720,6 +873,10 @@
 		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
 	};
 
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x10>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
 			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 06b4c93c5876..ceeca4966fc5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -253,8 +253,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -477,8 +480,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -556,16 +562,22 @@
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -800,6 +812,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
@@ -807,6 +826,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -814,6 +840,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
@@ -821,6 +854,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x150 /* IRQ# */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 4b8f86f63081..80db1ad7c230 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -116,6 +116,7 @@
 
 /* Verdin USB_2 */
 &usb3_1 {
+	fsl,permanently-attached;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 5dcd1de586b5..6a1890a4b5d8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -678,8 +679,8 @@
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -712,7 +713,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio4>;
 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -806,28 +807,45 @@
 };
 
 /* Verdin USB_1 */
-&usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
 };
 
 &usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
 	maximum-speed = "high-speed";
-	over-current-active-low;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_1_id>;
+	role-switch-default-mode = "peripheral";
 	srp-disable;
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+	};
 };
 
 /* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
 &usb3_phy1 {
 	vbus-supply = <&reg_usb2_vbus>;
 };
 
 &usb_dwc3_1 {
-	disable-over-current;
 	dr_mode = "host";
 };
 
@@ -1045,7 +1063,6 @@
 
 	pinctrl_gpio_hog3: gpiohog3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
 			/* CSI_1_MCLK */
 			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
 	};
@@ -1220,7 +1237,7 @@
 
 	pinctrl_usb1_vbus: usb1vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x19>;	/* SODIMM 155 */
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
 	};
 
 	/* USB_1_ID */
@@ -1229,9 +1246,15 @@
 			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
 	};
 
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
 	pinctrl_usb2_vbus: usb2vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x19>;	/* SODIMM 185 */
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
 	};
 
 	/* On-module Wi-Fi */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bb916a0948a8..7a6e6221f421 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -123,6 +123,7 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-level = <2>;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
@@ -441,10 +442,10 @@
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -631,6 +632,14 @@
 						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
 						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 					};
+
+					pgc_mlmix: power-domain@24 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
 				};
 			};
 		};
@@ -705,12 +714,15 @@
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30820000 0x10000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -719,12 +731,15 @@
 			ecspi2: spi@30830000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30830000 0x10000>;
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -733,12 +748,15 @@
 			ecspi3: spi@30840000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
 				reg = <0x30840000 0x10000>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
 					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
 				clock-names = "ipg", "per";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
 				dma-names = "rx", "tx";
 				status = "disabled";
@@ -1063,11 +1081,11 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-200M {
+				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
-				opp-1000M {
+				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 82387b9cb800..78937910f403 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -46,6 +46,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
@@ -163,22 +164,22 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
 		/*
 		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
 		 */
-		opp-166M {
+		opp-166000000 {
 			opp-hz = /bits/ 64 <166935483>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5b..4c8904fba1c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -7,6 +7,7 @@
 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -61,14 +62,13 @@
 	};
 
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
+		compatible = "pwm-leds";
 
 		led1 {
-			label = "LED 1";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 	};
 
@@ -615,9 +615,9 @@
 		>;
 	};
 
-	pinctrl_gpio_leds: gpioledgrp {
+	pinctrl_pwm_led: pwmledgrp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x16
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
 		>;
 	};
 
@@ -920,6 +920,12 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index ae08556b2ef2..ddf0e330dc7c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -311,15 +311,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 802ad6e5cef6..9a95e30fb42d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -220,12 +220,14 @@
 		reg = <0x53>;
 		pagesize = <16>;
 		read-only;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 
 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 19eaa523564d..7ce99c084e54 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -179,6 +179,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -605,10 +606,11 @@
 				};
 			};
 
-			anatop: syscon@30360000 {
-				compatible = "fsl,imx8mq-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mq-anatop";
 				reg = <0x30360000 0x10000>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -1184,7 +1186,7 @@
 			};
 
 			csi1: csi@30a90000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30a90000 0x10000>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
@@ -1236,7 +1238,7 @@
 			};
 
 			csi2: csi@30b80000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30b80000 0x10000>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
@@ -1356,15 +1358,15 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-133M {
+				opp-133000000 {
 					opp-hz = /bits/ 64 <133333333>;
 				};
 
-				opp-400M {
+				opp-400000000 {
 					opp-hz = /bits/ 64 <400000000>;
 				};
 
-				opp-800M {
+				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
index 669aa14ce9f7..b483134f84d1 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -6,30 +6,68 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 6>,
+		      <&iomuxc 6 7 22>,
+		      <&iomuxc 28 36 4>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 4>,
+		      <&iomuxc 4 50 12>,
+		      <&iomuxc 16 63 8>,
+		      <&iomuxc 24 72 8>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 80 4>,
+		      <&iomuxc 4 85 18>,
+		      <&iomuxc 22 104 10>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 114 2>,
+		      <&iomuxc 2 117 16>,
+		      <&iomuxc 18 141 1>,
+		      <&iomuxc 19 140 1>,
+		      <&iomuxc 20 139 1>,
+		      <&iomuxc 21 138 1>,
+		      <&iomuxc 22 137 1>,
+		      <&iomuxc 23 136 1>,
+		      <&iomuxc 24 135 1>,
+		      <&iomuxc 25 134 1>,
+		      <&iomuxc 26 142 3>,
+		      <&iomuxc 29 146 3>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 149 3>,
+		      <&iomuxc 3 153 4>,
+		      <&iomuxc 7 158 6>,
+		      <&iomuxc 13 165 6>,
+		      <&iomuxc 19 172 8>,
+		      <&iomuxc 27 198 5>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 203 1>,
+		      <&iomuxc 1 205 2>,
+		      <&iomuxc 3 210 11>,
+		      <&iomuxc 14 223 3>,
+		      <&iomuxc 17 227 2>,
+		      <&iomuxc 19 230 5>,
+		      <&iomuxc 24 236 6>,
+		      <&iomuxc 30 243 2>;
 };
 
 &lsio_gpio6 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 245 10>,
+		      <&iomuxc 10 256 12>;
 };
 
 &lsio_gpio7 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index c9c2b6536233..41ce8336f29e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -136,6 +136,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -144,6 +145,7 @@
 		A72_L2: l2-cache1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index a08e70fb7c7a..7c334b93db3b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -3,7 +3,7 @@
  * Copyright 2019 Toradex
  */
 
-#include "dt-bindings/input/linux-event-codes.h"
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	aliases {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
index 8e2152c6eb88..8f722b1dd078 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -6,26 +6,51 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 1 56 12>,
+		      <&iomuxc 13 69 4>,
+		      <&iomuxc 19 75 4>,
+		      <&iomuxc 24 80 1>,
+		      <&iomuxc 25 82 7>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 89 9>,
+		      <&iomuxc 9 99 16>,
+		      <&iomuxc 25 116 7>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 123 1>,
+		      <&iomuxc 1 126 2>,
+		      <&iomuxc 3 129 1>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 146 4>,
+		      <&iomuxc 4 151 13>,
+		      <&iomuxc 17 165 8>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 6>,
+		      <&iomuxc 13 16 6>,
+		      <&iomuxc 19 23 2>,
+		      <&iomuxc 21 26 2>,
+		      <&iomuxc 23 30 6>,
+		      <&iomuxc 29 37 3>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 3>,
+		      <&iomuxc 3 44 6>,
+		      <&iomuxc 9 51 3>;
 };
 
 &lsio_gpio6 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index f4ea18bb95ab..85c0b1d2bac5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -127,6 +127,7 @@
 		A35_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 06ce5f19aa8a..32193a43ff49 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -51,6 +51,7 @@
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
index 4298a145f8a9..4298a145f8a9 100755..100644
--- a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 0247866fc86b..5d79663b3b84 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -17,6 +17,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
 		i2c0 = &lpi2c1;
 		i2c1 = &lpi2c2;
 		i2c2 = &lpi2c3;
@@ -135,6 +139,7 @@
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x44230000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
 				#mbox-cells = <2>;
 				status = "disabled";
 			};
@@ -145,6 +150,15 @@
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&osc_24m>;
 				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
 			};
 
 			lpi2c1: i2c@44340000 {
@@ -270,10 +284,35 @@
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x42440000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
 				#mbox-cells = <2>;
 				status = "disabled";
 			};
 
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -294,6 +333,30 @@
 				status = "disabled";
 			};
 
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart3: serial@42570000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
@@ -388,6 +451,54 @@
 				status = "disabled";
 			};
 
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 		};
 
 		aips3: bus@42800000 {
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 104bdd4e437a..daa37adeff3b 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -215,6 +215,7 @@
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 824d401e7a2c..d8c82da88ca0 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -52,10 +52,12 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
index ba0b5305d481..3e306218d533 100644
--- a/arch/arm64/boot/dts/freescale/s32v234.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -61,10 +61,12 @@
 
 		cluster0_l2_cache: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2_cache: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8343d0cedde3..a57f35eb5ef6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -203,10 +203,12 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		A73_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index ae0a7cfeeb47..f6d3202b0d1a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -186,10 +186,12 @@
 
 		CLUSTER0_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		CLUSTER1_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 7b2abd10d3d6..5b2b1bfd0d2a 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -211,18 +211,22 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 2f8b03b0d365..291c2ee38288 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -211,18 +211,22 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 1a16662f8867..b8746fb959b5 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -842,66 +842,82 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster8_l2: l2-cache8 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster9_l2: l2-cache9 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster10_l2: l2-cache10 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster11_l2: l2-cache11 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster12_l2: l2-cache12 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster13_l2: l2-cache13 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster14_l2: l2-cache14 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		cluster15_l2: l2-cache15 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 7bbec8aafa62..849b46dd8098 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -313,6 +313,7 @@
 				 <&clkmgr AGILEX_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 26cd3c121757..07c3f8876613 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -83,6 +83,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 62c66e52b656..08c088571270 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -74,6 +74,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 44ed6f963b75..7308f7b6b22c 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -49,6 +49,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index ada164d423f3..cd0988317623 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
@@ -136,6 +139,7 @@
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	status = "okay";
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	slot-power-limit-milliwatt = <10000>;
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index df152c72276b..e300145ad1a6 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -35,6 +35,11 @@
 			reg = <0 0x4000000 0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
 	cpus {
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index fcab5173fe67..990f70303fe6 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -51,6 +51,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 3db427122f9e..a7b8e001cc9c 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -81,6 +81,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +89,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 68782f161f12..7740098fd108 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -81,6 +81,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +89,7 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index a06a0a889c43..4e6d29ad32eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -41,6 +41,11 @@
 			reg = <0x0 0x4000000 0x0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
 	AP_NAME {
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 0ec90cb3ef28..813e735c5b96 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 9b1af9c80130..d31a194124c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e6d7453e56e0..92212cddd37e 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -766,9 +766,9 @@
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_MSDC30_0>,
 			 <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
-			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>,
-			 <&pericfg CLK_PERI_MSDC50_0_EN>;
-		clock-names = "source", "hclk", "bus_clk", "source_cg";
+			 <&pericfg CLK_PERI_MSDC50_0_EN>,
+			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
+		clock-names = "source", "hclk", "source_cg", "bus_clk";
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..5c579e88e749 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: intpol-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -160,7 +160,7 @@
 		};
 
 		pio: pinctrl@10005000 {
-			compatible = "mediatek,mt6779-pinctrl", "syscon";
+			compatible = "mediatek,mt6779-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>,
 			      <0 0x11d10000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 000000000000..d3415527d389
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+/ {
+	model = "Sony Xperia M5";
+	compatible = "sony,xperia-m5", "mediatek,mt6795";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		/* preloader and bootloader regions cannot be touched */
+		preloader-region@44800000 {
+			reg = <0 0x44800000 0 0x100000>;
+			no-map;
+		};
+
+		bootloader-region@46000000 {
+			reg = <0 0x46000000 0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&pio {
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
+			output-high;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index 46f0e54be766..bb575837e4ce 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -6,7 +6,9 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mediatek,mt6795-clk.h>
 #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
 
 / {
 	compatible = "mediatek,mt6795";
@@ -192,6 +194,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt6795-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt6795-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt6795-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt6795-pinctrl";
 			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
@@ -292,7 +314,10 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -301,16 +326,48 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		apdma: dma-controller@11000380 {
+			compatible = "mediatek,mt6795-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000380 0 0x60>,
+			      <0 0x11000400 0 0x60>,
+			      <0 0x11000480 0 0x60>,
+			      <0 0x11000500 0 0x60>,
+			      <0 0x11000580 0 0x60>,
+			      <0 0x11000600 0 0x60>,
+			      <0 0x11000680 0 0x60>,
+			      <0 0x11000700 0 0x60>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <8>;
+			clocks = <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "apdma";
+			mediatek,dma-33bits;
+			#dma-cells = <1>;
+		};
+
 		uart2: serial@11004000 {
 			compatible = "mediatek,mt6795-uart",
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -319,7 +376,51 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 6>, <&apdma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+				 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..c3677d77e0a4 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d3f9eab2b784..af3fe61e4093 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -235,7 +235,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 36722cabe626..b74e774c6eba 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -208,7 +208,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index afe37b702eef..9b83925893b7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "MediaTek MT7986a RFB";
-	compatible = "mediatek,mt7986a-rfb";
+	compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
 
 	aliases {
 		serial0 = &uart0;
@@ -25,6 +25,10 @@
 	};
 };
 
+&crypto {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 
@@ -54,6 +58,88 @@
 	};
 };
 
+&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
 &switch {
 	ports {
 		#address-cells = <1>;
@@ -121,50 +207,3 @@
 	pinctrl-0 = <&wf_2g_5g_pins>;
 	pinctrl-1 = <&wf_dbdc_pins>;
 };
-
-&pio {
-	uart1_pins: uart1-pins {
-		mux {
-			function = "uart";
-			groups = "uart1";
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		mux {
-			function = "uart";
-			groups = "uart2";
-		};
-	};
-
-	wf_2g_5g_pins: wf-2g-5g-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_2g", "wf_5g";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-			       "WF1_TOP_CLK", "WF1_TOP_DATA";
-			drive-strength = <4>;
-		};
-	};
-
-	wf_dbdc_pins: wf-dbdc-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_dbdc";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA";
-			drive-strength = <4>;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 72e0d9722e07..ed703025a7cc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -10,11 +10,12 @@
 #include <dt-bindings/reset/mt7986-resets.h>
 
 / {
+	compatible = "mediatek,mt7986a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator@0 {
+	clk40m: oscillator-40m {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		#clock-cells = <0>;
@@ -112,6 +113,12 @@
 			#clock-cells = <1>;
 		};
 
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
 		topckgen: topckgen@1001b000 {
 			compatible = "mediatek,mt7986-topckgen", "syscon";
 			reg = <0 0x1001B000 0 0x1000>;
@@ -168,7 +175,7 @@
 			#clock-cells = <1>;
 		};
 
-		trng: trng@1020f000 {
+		trng: rng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
@@ -177,6 +184,21 @@
 			status = "disabled";
 		};
 
+		crypto: crypto@10320000 {
+			compatible = "inside-secure,safexcel-eip97";
+			reg = <0 0x10320000 0 0x40000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3";
+			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
+			clock-names = "infra_eip97_ck";
+			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
+			status = "disabled";
+		};
+
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -218,6 +240,48 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@11008000 {
+			compatible = "mediatek,mt7986-i2c";
+			reg = <0 0x11008000 0 0x90>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <5>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100b000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
 		ethsys: syscon@15000000 {
 			 #address-cells = <1>;
 			 #size-cells = <1>;
@@ -228,12 +292,6 @@
 			 #reset-cells = <1>;
 		};
 
-		wed_pcie: wed-pcie@10003000 {
-			compatible = "mediatek,mt7986-wed-pcie",
-				     "syscon";
-			reg = <0 0x10003000 0 0x10>;
-		};
-
 		wed0: wed@15010000 {
 			compatible = "mediatek,mt7986-wed",
 				     "syscon";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 3443013b5971..243760cd3011 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "MediaTek MT7986b RFB";
-	compatible = "mediatek,mt7986b-rfb";
+	compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
 
 	aliases {
 		serial0 = &uart0;
@@ -25,7 +25,7 @@
 	};
 };
 
-&uart0 {
+&crypto {
 	status = "okay";
 };
 
@@ -99,14 +99,21 @@
 	};
 };
 
-&wifi {
-	status = "okay";
-	pinctrl-names = "default", "dbdc";
-	pinctrl-0 = <&wf_2g_5g_pins>;
-	pinctrl-1 = <&wf_dbdc_pins>;
-};
-
 &pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
 	wf_2g_5g_pins: wf-2g-5g-pins {
 		mux {
 			function = "wifi";
@@ -138,3 +145,35 @@
 		};
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 23923b9f8944..db5189664c29 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -5,6 +5,9 @@
  */
 
 #include "mt7986a.dtsi"
+/ {
+	compatible = "mediatek,mt7986b";
+};
 
 &pio {
 	compatible = "mediatek,mt7986b-pinctrl";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b4b86bb1f1a7..7fc4c592a908 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -221,11 +221,6 @@
 	};
 };
 
-&afe {
-	i2s3-share = "I2S2";
-	i2s0-share = "I2S5";
-};
-
 &auxadc {
 	status = "okay";
 };
@@ -378,7 +373,6 @@
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
-	drv-type = <2>;
 	cap-sd-highspeed;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 64693c17af9e..c326aeb33a10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -198,16 +198,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 6b20376191a7..424fc89cc6f7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -169,16 +169,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 
 		idle-states {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 9b62e161db26..560103e29017 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -120,6 +120,78 @@
 	};
 };
 
+&dp_intf0 {
+	status = "okay";
+
+	port {
+		dp_intf0_out: endpoint {
+			remote-endpoint = <&edp_in>;
+		};
+	};
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	port {
+		dp_intf1_out: endpoint {
+			remote-endpoint = <&dptx_in>;
+		};
+	};
+};
+
+&edp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edptx_pins_default>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			edp_in: endpoint {
+				remote-endpoint = <&dp_intf0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			edp_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dptx_pin>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -479,6 +551,20 @@
 		};
 	};
 
+	edptx_pins_default: edptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	dptx_pin: dptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
 	i2c0_pins: i2c0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..5d31536f4c48 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -36,7 +37,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -49,7 +50,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -62,7 +63,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -75,7 +76,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -213,16 +214,19 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
 			next-level-cache = <&l3_0>;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
 		};
 	};
 
@@ -1182,6 +1186,110 @@
 			status = "disabled";
 		};
 
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		nor_flash: spi@1132c000 {
 			compatible = "mediatek,mt8195-nor",
 				     "mediatek,mt8173-nor";
@@ -1241,6 +1349,37 @@
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1461,6 +1600,23 @@
 			};
 		};
 
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ufsphy: ufs-phy@11fa0000 {
 			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
 			reg = <0 0x11fa0000 0 0xc000>;
@@ -1959,6 +2115,30 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
 		};
 
+		venc: video-codec@1a020000 {
+			compatible = "mediatek,mt8195-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			iommus = <&iommu_vdo M4U_PORT_L19_VENC_RCPU>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REC>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_BSDMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_SV_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_RD_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_CHROMA>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+		};
+
 		vencsys_core1: clock-controller@1b000000 {
 			compatible = "mediatek,mt8195-vencsys_core1";
 			reg = <0 0x1b000000 0 0x1000>;
@@ -2067,6 +2247,17 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
 		};
 
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys0  CLK_VDO0_DP_INTF0>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
 		mutex: mutex@1c016000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c016000 0 0x1000>;
@@ -2155,5 +2346,39 @@
 			clock-names = "apb", "smi", "gals";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
+				 <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 8ee1529683a3..ec8dfb3d1c6d 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -209,7 +209,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0 {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2 {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index d461da0b8049..3e8dee85d55f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: pinmux@0 {
+		pinmux_default: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 3673f79adf1a..858fc01cecb6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -393,7 +393,6 @@
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA124_CLK_PWM>;
-		clock-names = "pwm";
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 6602fe421ee8..b3f1494c02c1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -78,7 +78,8 @@
 		reg = <0x0 0x2600000 0x0 0x210000>;
 		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
 		reset-names = "gpcdma";
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -112,6 +113,7 @@
 		#dma-cells = <1>;
 		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
 		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
 		status = "okay";
 	};
 
@@ -790,7 +792,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3280000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM1>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM1>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -801,7 +802,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3290000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM2>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM2>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -812,7 +812,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32a0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM3>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM3>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -823,7 +822,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32c0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM5>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM5>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -834,7 +832,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32d0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM6>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM6>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -845,7 +842,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32e0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM7>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM7>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -856,7 +852,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32f0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM8>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM8>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -1274,7 +1269,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0xc340000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM4>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM4>;
 		reset-names = "pwm";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index b0f9393dd39c..cd272d407e01 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -23,7 +23,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 273a1ef716b6..f212f6aced04 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -2117,8 +2117,8 @@
 							"usb-b-connector";
 						label = "micro-USB";
 						type = "micro";
-						vbus-gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
-								GPIO_ACTIVE_LOW>;
+						vbus-gpios = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								    GPIO_ACTIVE_LOW>;
 					};
 				};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
index 0bd66f9c620b..0751edddf7d5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -20,7 +20,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 41f3a7e188d0..4afcbd60e144 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -86,6 +86,7 @@
 			interrupt-controller;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
 		};
 
 		cbb-noc@2300000 {
@@ -142,7 +143,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -176,6 +178,7 @@
 			#dma-cells = <1>;
 			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
 			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
 			status = "okay";
 		};
 
@@ -626,12 +629,10 @@
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000>,
-			      <0xc300000 0x4000>;
-
+			reg = <0x2430000 0x17000>;
 			status = "okay";
 
-			pex_rst_c5_out_state: pex_rst_c5_out {
+			pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
 				pex_rst {
 					nvidia,pins = "pex_l5_rst_n_pgg1";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
@@ -642,7 +643,7 @@
 				};
 			};
 
-			clkreq_c5_bi_dir_state: clkreq_c5_bi_dir {
+			clkreq_c5_bi_dir_state: pinmux-clkreq-c5-bi-dir {
 				clkreq {
 					nvidia,pins = "pex_l5_clkreq_n_pgg0";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
@@ -935,7 +936,6 @@
 				 <&bpmp TEGRA194_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA194_RESET_QSPI0>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
@@ -949,7 +949,6 @@
 				 <&bpmp TEGRA194_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA194_RESET_QSPI1>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
@@ -958,7 +957,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x3280000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM1>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM1>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -970,7 +968,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x3290000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM2>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM2>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -982,7 +979,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32a0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM3>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM3>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -994,7 +990,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32c0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM5>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM5>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1006,7 +1001,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32d0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM6>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM6>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1018,7 +1012,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32e0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM7>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM7>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1030,7 +1023,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0x32f0000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM8>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM8>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1154,7 +1146,7 @@
 		};
 
 		hda@3510000 {
-			compatible = "nvidia,tegra194-hda", "nvidia,tegra30-hda";
+			compatible = "nvidia,tegra194-hda";
 			reg = <0x3510000 0x10000>;
 			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_HDA>,
@@ -1366,6 +1358,16 @@
 			status = "disabled";
 		};
 
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra194-gte-lic";
+			reg = <0x3aa0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <11>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
 		hsp_top0: hsp@3c00000 {
 			compatible = "nvidia,tegra194-hsp";
 			reg = <0x03c00000 0xa0000>;
@@ -1579,6 +1581,16 @@
 			#mbox-cells = <2>;
 		};
 
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra194-gte-aon";
+			reg = <0xc1e0000 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <3>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
 		gen2_i2c: i2c@c240000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
@@ -1660,6 +1672,14 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-range = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0xc300000 0x4000>;
+
+			status = "okay";
 		};
 
 		pwm4: pwm@c340000 {
@@ -1667,7 +1687,6 @@
 				     "nvidia,tegra186-pwm";
 			reg = <0xc340000 0x10000>;
 			clocks = <&bpmp TEGRA194_CLK_PWM4>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA194_RESET_PWM4>;
 			reset-names = "pwm";
 			status = "disabled";
@@ -1895,7 +1914,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0x15000000 0x15000000 0x01000000>;
+			ranges = <0x14800000 0x14800000 0x02800000>;
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
 			interconnect-names = "dma-mem";
 			iommus = <&smmu TEGRA194_SID_HOST1X>;
@@ -3029,36 +3048,51 @@
 		};
 
 		l2c_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l2c_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <2>;
 			next-level-cache = <&l3c>;
 		};
 
 		l3c: l3-cache {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <4194304>;
 			cache-line-size = <64>;
+			cache-level = <3>;
 			cache-sets = <4096>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a44c56c1e56e..dd9a17922fe5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1293,14 +1293,14 @@
 			};
 		};
 
-		dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 		};
 
-		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -1368,6 +1368,7 @@
 		#size-cells = <0>;
 
 		ethernet@1 {
+			compatible = "usb955,9ff";
 			reg = <1>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 37678c337a34..2041371ea7ff 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -109,14 +109,14 @@
 	};
 
 	pinmux@700008d4 {
-		dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 		};
 
-		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
 			dvfs_pwm_pbb1 {
 				nvidia,pins = "dvfs_pwm_pbb1";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 724e87450605..bc0cacb20d7a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -554,42 +554,48 @@
 		compatible = "nvidia,tegra210-pinmux";
 		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
-		sdmmc1_3v3_drv: sdmmc1-3v3-drv {
+
+		sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv {
 			sdmmc1 {
 				nvidia,pins = "drive_sdmmc1";
 				nvidia,pull-down-strength = <0x8>;
 				nvidia,pull-up-strength = <0x8>;
 			};
 		};
-		sdmmc1_1v8_drv: sdmmc1-1v8-drv {
+
+		sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv {
 			sdmmc1 {
 				nvidia,pins = "drive_sdmmc1";
 				nvidia,pull-down-strength = <0x4>;
 				nvidia,pull-up-strength = <0x3>;
 			};
 		};
-		sdmmc2_1v8_drv: sdmmc2-1v8-drv {
+
+		sdmmc2_1v8_drv: pinmux-sdmmc2-1v8-drv {
 			sdmmc2 {
 				nvidia,pins = "drive_sdmmc2";
 				nvidia,pull-down-strength = <0x10>;
 				nvidia,pull-up-strength = <0x10>;
 			};
 		};
-		sdmmc3_3v3_drv: sdmmc3-3v3-drv {
+
+		sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv {
 			sdmmc3 {
 				nvidia,pins = "drive_sdmmc3";
 				nvidia,pull-down-strength = <0x8>;
 				nvidia,pull-up-strength = <0x8>;
 			};
 		};
-		sdmmc3_1v8_drv: sdmmc3-1v8-drv {
+
+		sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv {
 			sdmmc3 {
 				nvidia,pins = "drive_sdmmc3";
 				nvidia,pull-down-strength = <0x4>;
 				nvidia,pull-up-strength = <0x3>;
 			};
 		};
-		sdmmc4_1v8_drv: sdmmc4-1v8-drv {
+
+		sdmmc4_1v8_drv: pinmux-sdmmc4-1v8-drv {
 			sdmmc4 {
 				nvidia,pins = "drive_sdmmc4";
 				nvidia,pull-down-strength = <0x10>;
@@ -667,7 +673,6 @@
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA210_CLK_PWM>;
-		clock-names = "pwm";
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -912,35 +917,33 @@
 			};
 		};
 
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
+		pinmux {
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 
-		sdmmc3_3v3: sdmmc3-3v3 {
-			pins = "sdmmc3";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 
-		sdmmc3_1v8: sdmmc3-1v8 {
-			pins = "sdmmc3";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 
-		pex_dpd_disable: pex_en {
-			pex-dpd-disable {
+			pex_dpd_disable: pex-dpd-disable {
 				pins = "pex-bias", "pex-clk1", "pex-clk2";
 				low-power-disable;
 			};
-		};
 
-		pex_dpd_enable: pex_dis {
-			pex-dpd-enable {
+			pex_dpd_enable: pex-dpd-enable {
 				pins = "pex-bias", "pex-clk1", "pex-clk2";
 				low-power-enable;
 			};
@@ -1865,7 +1868,6 @@
 			 <&tegra_car TEGRA210_CLK_QSPI_PM>;
 		clock-names = "qspi", "qspi_out";
 		resets = <&tegra_car 211>;
-		reset-names = "qspi";
 		dmas = <&apbdma 5>, <&apbdma 5>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -2005,6 +2007,7 @@
 
 		L2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
index 9e4d72cfa69f..8b86ea9cb50c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -39,7 +39,6 @@
 		regulator-max-microvolt = <12000000>;
 		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		regulator-boot-on;
-		enable-active-low;
 	};
 
 	bus@0 {
@@ -55,6 +54,13 @@
 			};
 		};
 
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
 		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 57ab75328814..96aa2267b06d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2007,6 +2007,17 @@
 			status = "okay";
 		};
 
+		serial@31d0000 {
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
 		hda@3510000 {
 			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
 			status = "okay";
@@ -2014,7 +2025,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -2184,4 +2195,12 @@
 		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 			    "p2u-5", "p2u-6", "p2u-7";
 	};
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+
+		cooling-levels = <0 95 178 255>;
+		#cooling-cells = <2>;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
index a85993c85e45..e76894574d32 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
@@ -2,4 +2,18 @@
 
 / {
 	compatible = "nvidia,p3737-0000";
+
+	bus@0 {
+		pwm@3280000 {
+			status = "okay";
+		};
+
+		pwm@32c0000 {
+			status = "okay";
+		};
+
+		pwm@32f0000 {
+			status = "okay";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 0170bfa8a467..eaf05ee9acd1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/memory/tegra234-mc.h>
 #include <dt-bindings/power/tegra234-powergate.h>
 #include <dt-bindings/reset/tegra234-reset.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
 
 / {
 	compatible = "nvidia,tegra234";
@@ -27,7 +28,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA234_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -60,6 +62,7 @@
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			dma-channel-mask = <0xfffffffe>;
 			dma-coherent;
 		};
 
@@ -564,7 +567,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0x15000000 0x15000000 0x01000000>;
+			ranges = <0x14800000 0x14800000 0x02000000>;
 			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>;
 			interconnect-names = "dma-mem";
 			iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>;
@@ -603,6 +606,42 @@
 				iommus = <&smmu_niso1 TEGRA234_SID_VIC>;
 				dma-coherent;
 			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra234-nvdec";
+				reg = <0x15480000 0x00040000>;
+				clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+					 <&bpmp TEGRA234_CLK_FUSE>,
+					 <&bpmp TEGRA234_CLK_TSEC_PKA>;
+				clock-names = "nvdec", "fuse", "tsec_pka";
+				resets = <&bpmp TEGRA234_RESET_NVDEC>;
+				reset-names = "nvdec";
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,memory-controller = <&mc>;
+
+				/*
+				 * Placeholder values that firmware needs to update with the real
+				 * offsets parsed from the microcode headers.
+				 */
+				nvidia,bl-manifest-offset = <0>;
+				nvidia,bl-data-offset = <0>;
+				nvidia,bl-code-offset = <0>;
+				nvidia,os-manifest-offset = <0>;
+				nvidia,os-data-offset = <0>;
+				nvidia,os-code-offset = <0>;
+
+				/*
+				 * Firmware needs to set this to "okay" once the above values have
+				 * been updated.
+				 */
+				status = "disabled";
+			};
 		};
 
 		gpio: gpio@2200000 {
@@ -836,6 +875,13 @@
 			dma-names = "rx", "tx";
 		};
 
+		uarti: serial@31d0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x31d0000 0x10000>;
+			interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dp_aux_ch3_i2c: i2c@31e0000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0x31e0000 0x100>;
@@ -865,22 +911,79 @@
 				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI0>;
-			reset-names = "qspi";
 			status = "disabled";
 		};
 
 		pwm1: pwm@3280000 {
-			compatible = "nvidia,tegra194-pwm",
-				     "nvidia,tegra186-pwm";
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
 			reg = <0x3280000 0x10000>;
 			clocks = <&bpmp TEGRA234_CLK_PWM1>;
-			clock-names = "pwm";
 			resets = <&bpmp TEGRA234_RESET_PWM1>;
 			reset-names = "pwm";
 			status = "disabled";
 			#pwm-cells = <2>;
 		};
 
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x3290000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM2>;
+			resets = <&bpmp TEGRA234_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32a0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			resets = <&bpmp TEGRA234_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32c0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM5>;
+			resets = <&bpmp TEGRA234_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32d0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM6>;
+			resets = <&bpmp TEGRA234_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32e0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM7>;
+			resets = <&bpmp TEGRA234_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x32f0000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM8>;
+			resets = <&bpmp TEGRA234_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
 		spi@3300000 {
 			compatible = "nvidia,tegra234-qspi";
 			reg = <0x3300000 0x1000>;
@@ -891,7 +994,41 @@
 				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI1>;
-			reset-names = "qspi";
+			status = "disabled";
+		};
+
+		mmc@3400000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x03400000 0x20000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+					  <&bpmp TEGRA234_CLK_PLLC4_MUXED>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4_MUXED>,
+						 <&bpmp TEGRA234_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC1A>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <14>;
+			nvidia,default-trim = <0x8>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
 			status = "disabled";
 		};
 
@@ -925,7 +1062,7 @@
 		};
 
 		hda@3510000 {
-			compatible = "nvidia,tegra234-hda", "nvidia,tegra30-hda";
+			compatible = "nvidia,tegra234-hda";
 			reg = <0x3510000 0x10000>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA234_CLK_AZA_BIT>,
@@ -967,6 +1104,198 @@
 			#mbox-cells = <2>;
 		};
 
+		p2u_hsio_0: phy@3e00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e00000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e10000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e10000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e20000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e30000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e40000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e50000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e60000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e70000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3e90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03e90000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ea0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ea0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3eb0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03eb0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ec0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ec0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ed0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ed0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3ee0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ee0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3ef0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03ef0000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f00000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_0: phy@3f20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f20000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_1: phy@3f30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f30000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_2: phy@3f40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f40000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_3: phy@3f50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f50000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_4: phy@3f60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f60000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_5: phy@3f70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f70000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_6: phy@3f80000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f80000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_7: phy@3f90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x03f90000 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
 		ethernet@6800000 {
 			compatible = "nvidia,tegra234-mgbe";
 			reg = <0x06800000 0x10000>,
@@ -1259,198 +1588,6 @@
 			status = "okay";
 		};
 
-		p2u_hsio_0: phy@3e00000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e00000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_1: phy@3e10000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e10000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_2: phy@3e20000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e20000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_3: phy@3e30000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e30000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_4: phy@3e40000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e40000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_5: phy@3e50000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e50000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_6: phy@3e60000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e60000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_hsio_7: phy@3e70000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e70000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_0: phy@3e90000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03e90000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_1: phy@3ea0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ea0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_2: phy@3eb0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03eb0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_3: phy@3ec0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ec0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_4: phy@3ed0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ed0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_5: phy@3ee0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ee0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_6: phy@3ef0000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03ef0000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_nvhs_7: phy@3f00000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f00000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_0: phy@3f20000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f20000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_1: phy@3f30000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f30000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_2: phy@3f40000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f40000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_3: phy@3f50000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f50000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_4: phy@3f60000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f60000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_5: phy@3f70000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f70000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_6: phy@3f80000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f80000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
-		p2u_gbe_7: phy@3f90000 {
-			compatible = "nvidia,tegra234-p2u";
-			reg = <0x03f90000 0x10000>;
-			reg-names = "ctl";
-
-			#phy-cells = <0>;
-		};
-
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
 			reg = <0x0c150000 0x90000>;
@@ -1488,7 +1625,6 @@
 		gen8_i2c: i2c@c250000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0xc250000 0x100>;
-			nvidia,hw-instance-id = <0x7>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clock-frequency = <400000>;
@@ -1530,6 +1666,16 @@
 			gpio-controller;
 		};
 
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0xc340000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM4>;
+			resets = <&bpmp TEGRA234_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
 		pmc: pmc@c360000 {
 			compatible = "nvidia,tegra234-pmc";
 			reg = <0x0c360000 0x10000>,
@@ -1541,6 +1687,26 @@
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 		};
 
 		aon-fabric@c600000 {
@@ -1576,7 +1742,7 @@
 			interrupt-controller;
 		};
 
-		smmu_iso: iommu@10000000{
+		smmu_iso: iommu@10000000 {
 			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
 			reg = <0x10000000 0x1000000>;
 			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
@@ -1879,8 +2045,9 @@
 		reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1932,8 +2099,9 @@
 		reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2c080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1965,7 +2133,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
 			 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -1985,8 +2153,9 @@
 		reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x2e080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2038,8 +2207,9 @@
 		reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2091,8 +2261,9 @@
 		reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2144,8 +2315,9 @@
 		reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2178,7 +2350,7 @@
 		bus-range = <0x0 0xff>;
 
 		ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
-			 <0x02000000 0x0  0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+			 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
 		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
@@ -2197,8 +2369,9 @@
 		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2250,8 +2423,9 @@
 		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2303,8 +2477,9 @@
 		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2336,7 +2511,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
 			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2356,8 +2531,9 @@
 		reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3c080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2409,8 +2585,9 @@
 		reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
 		      <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */
 		      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-		      <0x00 0x3e080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-		reg-names = "appl", "config", "atu_dma", "dbi";
+		      <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+		reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -2442,7 +2619,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
 			 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2905,117 +3082,150 @@
 		};
 
 		l2c0_0: l2-cache00 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_1: l2-cache01 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_2: l2-cache02 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c0_3: l2-cache03 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c0>;
 		};
 
 		l2c1_0: l2-cache10 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_1: l2-cache11 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_2: l2-cache12 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c1_3: l2-cache13 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c1>;
 		};
 
 		l2c2_0: l2-cache20 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_1: l2-cache21 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_2: l2-cache22 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l2c2_3: l2-cache23 {
+			compatible = "cache";
 			cache-size = <262144>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
 			cache-unified;
+			cache-level = <2>;
 			next-level-cache = <&l3c2>;
 		};
 
 		l3c0: l3-cache0 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 
 		l3c1: l3-cache1 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 
 		l3c2: l3-cache2 {
+			compatible = "cache";
+			cache-unified;
 			cache-size = <2097152>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
+			cache-level = <3>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f..3e79496292e7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
@@ -33,12 +35,14 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-satsuki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-suzuran.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3t.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-dora.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-kagura.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-keyaki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-gemini.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-natrium.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-scorpio.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-natrium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-scorpio.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-fxtec-pro1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
@@ -49,11 +53,14 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
@@ -87,6 +94,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-wifi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2.dtb
@@ -104,11 +113,14 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
@@ -122,25 +134,31 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-enchilada.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-samsung-starqltechn.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akari.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akatsuki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-apollo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-ebbg.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-tianma.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
@@ -159,3 +177,4 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 1b613098fb4a..ef5b39ba1238 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -718,14 +718,14 @@
 		"USR_LED_2_CTRL", /* GPIO 120 */
 		"SB_HS_ID";
 
-	msmgpio_leds: msmgpio-leds {
+	msmgpio_leds: msmgpio-leds-state {
 		pins = "gpio21", "gpio120";
 		function = "gpio";
 
 		output-low;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -734,7 +734,7 @@
 		bias-pull-up;
 	};
 
-	adv7533_int_active: adv533-int-active {
+	adv7533_int_active: adv533-int-active-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -742,7 +742,7 @@
 		bias-disable;
 	};
 
-	adv7533_int_suspend: adv7533-int-suspend {
+	adv7533_int_suspend: adv7533-int-suspend-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -750,7 +750,7 @@
 		bias-disable;
 	};
 
-	adv7533_switch_active: adv7533-switch-active {
+	adv7533_switch_active: adv7533-switch-active-state {
 		pins = "gpio32";
 		function = "gpio";
 
@@ -758,7 +758,7 @@
 		bias-disable;
 	};
 
-	adv7533_switch_suspend: adv7533-switch-suspend {
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
 		pins = "gpio32";
 		function = "gpio";
 
@@ -766,7 +766,7 @@
 		bias-disable;
 	};
 
-	msm_key_volp_n_default: msm-key-volp-n-default {
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -839,7 +839,7 @@
 		function = "digital";
 
 		output-low;
-		power-source = <PM8916_MPP_L5>;	// 1.8V
+		power-source = <PM8916_MPP_L5>;	/* 1.8V */
 	};
 
 	pm8916_mpps_leds: pm8916-mpps-state {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 5cdc7ac1a9c0..fe6c415e8229 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -422,82 +422,46 @@
 		"NC", /* GPIO_148 */
 		"NC"; /* GPIO_149 */
 
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <16>;
 	};
 
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
 	};
 
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
+	hdmi_hpd_active: hdmi-hpd-active-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <16>;
 	};
 
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
+	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <2>;
 	};
 
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
+	hdmi_ddc_active: hdmi-ddc-active-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-up;
 	};
 
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 };
 
@@ -560,7 +524,7 @@
 			pins = "gpio5";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -569,7 +533,7 @@
 			pins = "gpio19";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -580,7 +544,7 @@
 			pins = "gpio8";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -590,7 +554,7 @@
 		pinconf {
 			pins = "gpio15";
 			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -602,7 +566,7 @@
 			drive-push-pull;
 			bias-pull-up;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -623,7 +587,7 @@
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
@@ -679,7 +643,7 @@
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
@@ -751,7 +715,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -963,7 +927,7 @@
 		};
 	};
 
-	pmi8994-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index 92f264891d84..71e0a500599c 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -104,65 +104,27 @@
 	status = "okay";
 };
 
-&tlmm {
-	sdc2_pins_default: sdc2-pins-default {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <16>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
 
-		cd {
-			pins = "gpio38";
-			function = "gpio";
-
-			bias-pull-up;
-			drive-strength = <16>;
-		};
+		bias-pull-up;
+		drive-strength = <16>;
 	};
+};
 
-	sdc2_pins_sleep: sdc2-pins-sleep {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <2>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		cd {
-			pins = "gpio38";
-			function = "gpio";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
 	};
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -372,10 +334,6 @@
 
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vreg_l13a_2p95>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_pins_default>;
-	pinctrl-1 = <&sdc2_pins_sleep>;
 };
 
 &ufshc {
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c7b..2aee8594b280 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -19,7 +19,6 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1";
 	};
 };
 
@@ -37,6 +36,8 @@
 
 &blsp1_spi1 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	flash@0 {
@@ -49,13 +50,13 @@
 };
 
 &tlmm {
-	i2c_1_pins: i2c-1-pins {
+	i2c_1_pins: i2c-1-state {
 		pins = "gpio42", "gpio43";
 		function = "blsp2_i2c";
 		drive-strength = <8>;
 	};
 
-	spi_0_pins: spi-0-pins {
+	spi_0_pins: spi-0-state {
 		pins = "gpio38", "gpio39", "gpio40", "gpio41";
 		function = "blsp0_spi";
 		drive-strength = <8>;
@@ -80,9 +81,9 @@
 };
 
 &qusb_phy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb2 {
-	status = "ok";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a7c7ca980a71..5d453f11acd9 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -218,14 +218,14 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			serial_3_pins: serial3-pinmux {
+			serial_3_pins: serial3-state {
 				pins = "gpio44", "gpio45";
 				function = "blsp2_uart";
 				drive-strength = <8>;
 				bias-pull-down;
 			};
 
-			qpic_pins: qpic-pins {
+			qpic_pins: qpic-state {
 				pins = "gpio1", "gpio3", "gpio4",
 					"gpio5", "gpio6", "gpio7",
 					"gpio8", "gpio10", "gpio11",
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		qpic_nand: nand@79b0000 {
+		qpic_nand: nand-controller@79b0000 {
 			compatible = "qcom,ipq6018-nand";
 			reg = <0x0 0x079b0000 0x0 0x10000>;
 			#address-cells = <1>;
@@ -406,7 +406,8 @@
 			pcie_phy0: phy@84200 {
 				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
 				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
@@ -511,14 +512,6 @@
 			clock-names = "xo";
 		};
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -770,6 +763,14 @@
 		};
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	wcss: wcss-smp2p {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 7143c936de61..ca3f96646b90 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
-/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
  */
 #include "ipq8074.dtsi"
+#include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
@@ -51,12 +54,12 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpios = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpios = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy0 {
@@ -84,6 +87,7 @@
 
 &sdhc_1 {
 	status = "okay";
+	vqmmc-supply = <&l11>;
 };
 
 &qusb_phy_0 {
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
index 2bfcf42aeabc..cc1992ca0519 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
index 7da39f1d979b..d7f0efda6b8e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
  */
 #include "ipq8074-hk10.dtsi"
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index db4b87944cdf..651a231554e0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -5,6 +5,7 @@
 /dts-v1/;
 
 #include "ipq8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -22,7 +23,7 @@
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	flash@0 {
 		#address-cells = <1>;
@@ -34,33 +35,33 @@
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
-	perst-gpios = <&tlmm 58 0x1>;
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
-	status = "ok";
-	perst-gpios = <&tlmm 61 0x1>;
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a47acf9bdf24..4e51d8e3df04 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -129,10 +129,10 @@
 			status = "disabled";
 
 			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,       /* Tx */
+				reg = <0x00058200 0x130>,     /* Tx */
 				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS  */
-				      <0x00058600 0x044>;     /* PCS misc*/
+				      <0x00058800 0x1f8>,     /* PCS */
+				      <0x00058600 0x044>;     /* PCS misc */
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
@@ -172,10 +172,10 @@
 			status = "disabled";
 
 			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,       /* Tx */
+				reg = <0x00078200 0x130>,     /* Tx */
 				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS  */
-				      <0x00078600 0x044>;     /* PCS misc*/
+				      <0x00078800 0x1f8>,     /* PCS */
+				      <0x00078600 0x044>;     /* PCS misc */
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
@@ -273,6 +273,16 @@
 			status = "disabled";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq8074-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		cryptobam: dma-controller@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00704000 0x20000>;
@@ -307,35 +317,35 @@
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 
-			serial_4_pins: serial4-pinmux {
+			serial_4_pins: serial4-state {
 				pins = "gpio23", "gpio24";
 				function = "blsp4_uart1";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio42", "gpio43";
 				function = "blsp1_i2c";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pins {
+			spi_0_pins: spi-0-state {
 				pins = "gpio38", "gpio39", "gpio40", "gpio41";
 				function = "blsp0_spi";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			hsuart_pins: hsuart-pins {
+			hsuart_pins: hsuart-state {
 				pins = "gpio46", "gpio47", "gpio48", "gpio49";
 				function = "blsp2_uart";
 				drive-strength = <8>;
 				bias-disable;
 			};
 
-			qpic_pins: qpic-pins {
+			qpic_pins: qpic-state {
 				pins = "gpio1", "gpio3", "gpio4",
 				       "gpio5", "gpio6", "gpio7",
 				       "gpio8", "gpio10", "gpio11",
@@ -350,9 +360,11 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			#clock-cells = <0x1>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
 			#power-domain-cells = <1>;
-			#reset-cells = <0x1>;
+			#reset-cells = <1>;
 		};
 
 		tcsr_mutex: hwlock@1905000 {
@@ -668,12 +680,22 @@
 
 		apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global";
-			reg = <0x0b111000 0x6000>;
+			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
 		};
 
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq8074-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -865,4 +887,90 @@
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+		};
+
+		nss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+		};
+
+		nss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+		};
+
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 11>;
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 12>;
+		};
+
+		cluster_thermal: cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 13>;
+		};
+
+		wcss-phyb0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 14>;
+		};
+
+		wcss-phyb1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 15>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 3dc9619fde6e..701a5585d77e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -5,6 +5,7 @@
 #include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Alcatel OneTouch Idol 3 (4.7)";
@@ -34,6 +35,19 @@
 		};
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "torch";
+			function = LED_FUNCTION_TORCH;
+		};
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
@@ -116,6 +130,27 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@68 {
+		compatible = "si-en,sn3190";
+		reg = <0x68>;
+		shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_enable_default &led_shutdown_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -260,7 +295,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -268,7 +303,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -276,7 +311,15 @@
 		bias-pull-up;
 	};
 
-	gyro_int_default: gyro-int-default {
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gyro_int_default: gyro-int-default-state {
 		pins = "gpio97", "gpio98";
 		function = "gpio";
 
@@ -284,7 +327,30 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	/*
+	 * The OEM wired an additional GPIO to be asserted so that
+	 * the si-en,sn3190 LED IC works. Since this GPIO is not
+	 * part of the IC datasheet nor supported by the driver,
+	 * force it asserted here.
+	 */
+	led_enable_default: led-enable-default-state {
+		pins = "gpio102";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	led_shutdown_default: led-shutdown-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio8";
 		function = "gpio";
 
@@ -292,7 +358,7 @@
 		bias-disable;
 	};
 
-	proximity_int_default: proximity-int-default {
+	proximity_int_default: proximity-int-default-state {
 		pins = "gpio12";
 		function = "gpio";
 
@@ -300,7 +366,7 @@
 		bias-pull-up;
 	};
 
-	ts_int_reset_default: ts-int-reset-default {
+	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
 
@@ -308,7 +374,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio69";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index dd92070a1211..3618704a5330 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -263,7 +263,7 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio117";
 		function = "gpio";
 
@@ -271,7 +271,7 @@
 		bias-pull-up;
 	};
 
-	imu_default: imu-default {
+	imu_default: imu-default-state {
 		pins = "gpio36";
 		function = "gpio";
 
@@ -279,7 +279,7 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio112";
 		function = "gpio";
 
@@ -287,7 +287,7 @@
 		bias-disable;
 	};
 
-	sd_vmmc_en_default: sd-vmmc-en-default {
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
 		pins = "gpio87";
 		function = "gpio";
 
@@ -295,14 +295,16 @@
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen-default {
-		pins = "gpio13";
-		function = "gpio";
+	touchscreen_default: touchscreen-default-state {
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
 
-		drive-strength = <2>;
-		bias-pull-up;
+			drive-strength = <2>;
+			bias-pull-up;
+		};
 
-		reset {
+		reset-pins {
 			pins = "gpio12";
 			function = "gpio";
 
@@ -311,7 +313,7 @@
 		};
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 9e470c67274e..8c07eca900d3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2021 Stephan Gerhold
+/*
+ * Copyright (C) 2021 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -414,7 +416,7 @@
 };
 
 &msmgpio {
-	accel_irq_default: accel-irq-default {
+	accel_irq_default: accel-irq-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -422,7 +424,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -430,7 +432,7 @@
 		bias-pull-up;
 	};
 
-	gpio_leds_default: gpio-leds-default {
+	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio8", "gpio9", "gpio10";
 		function = "gpio";
 
@@ -438,7 +440,7 @@
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
+	nfc_default: nfc-default-state {
 		pins = "gpio2", "gpio20", "gpio21";
 		function = "gpio";
 
@@ -446,7 +448,7 @@
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio36";
 		function = "gpio";
 
@@ -454,7 +456,7 @@
 		bias-disable;
 	};
 
-	prox_irq_default: prox-irq-default {
+	prox_irq_default: prox-irq-default-state {
 		pins = "gpio113";
 		function = "gpio";
 
@@ -462,7 +464,7 @@
 		bias-disable;
 	};
 
-	reg_lcd_en_default: reg-lcd-en-default {
+	reg_lcd_en_default: reg-lcd-en-default-state {
 		pins = "gpio32", "gpio97";
 		function = "gpio";
 
@@ -470,7 +472,7 @@
 		bias-disable;
 	};
 
-	sdhc2_cd_default: sdhc2-cd-default {
+	sdhc2_cd_default: sdhc2-cd-default-state {
 		pins = "gpio56";
 		function = "gpio";
 
@@ -478,7 +480,7 @@
 		bias-disable;
 	};
 
-	ts_irq_default: ts-irq-default {
+	ts_irq_default: ts-irq-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
@@ -486,7 +488,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio117";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d85e7f7c0835..d1e8cf2f50c0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -22,7 +22,7 @@
 	};
 
 	reserved-memory {
-		// wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
+		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
 		/delete-node/ wcnss@89300000;
 
 		wcnss_mem: wcnss@8b600000 {
@@ -204,12 +204,12 @@
 
 		rmi4-f01@1 {
 			reg = <0x1>;
-			syna,nosleep-mode = <1>; // Allow sleeping
+			syna,nosleep-mode = <1>; /* Allow sleeping */
 		};
 
 		rmi4-f12@12 {
 			reg = <0x12>;
-			syna,sensor-type = <1>; // Touchscreen
+			syna,sensor-type = <1>; /* Touchscreen */
 		};
 	};
 };
@@ -367,7 +367,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio116";
 		function = "gpio";
 
@@ -375,7 +375,7 @@
 		bias-disable;
 	};
 
-	camera_flash_default: camera-flash-default {
+	camera_flash_default: camera-flash-default-state {
 		pins = "gpio31", "gpio32";
 		function = "gpio";
 
@@ -383,7 +383,7 @@
 		bias-disable;
 	};
 
-	ctp_pwr_en_default: ctp-pwr-en-default {
+	ctp_pwr_en_default: ctp-pwr-en-default-state {
 		pins = "gpio17";
 		function = "gpio";
 
@@ -391,7 +391,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -399,7 +399,7 @@
 		bias-pull-up;
 	};
 
-	gyro_int_default: gyro-int-default {
+	gyro_int_default: gyro-int-default-state {
 		pins = "gpio22", "gpio23";
 		function = "gpio";
 
@@ -407,7 +407,7 @@
 		bias-disable;
 	};
 
-	light_int_default: light-int-default {
+	light_int_default: light-int-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -415,7 +415,7 @@
 		bias-disable;
 	};
 
-	magn_int_default: magn-int-default {
+	magn_int_default: magn-int-default-state {
 		pins = "gpio113";
 		function = "gpio";
 
@@ -423,7 +423,7 @@
 		bias-disable;
 	};
 
-	tp_int_default: tp-int-default {
+	tp_int_default: tp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index b4812f093b17..3899e11b9843 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -234,7 +234,7 @@
 };
 
 &msmgpio {
-	button_backlight_default: button-backlight-default {
+	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
 		function = "gpio";
 
@@ -242,7 +242,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -250,7 +250,7 @@
 		bias-pull-up;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio111";
 		function = "gpio";
 
@@ -258,7 +258,7 @@
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 7dedb91b9930..33dfcf318a81 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -5,8 +5,8 @@
 
 &msmgpio {
 
-	blsp1_uart1_default: blsp1-uart1-default {
-		//	TX, RX, CTS_N, RTS_N
+	blsp1_uart1_default: blsp1-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "blsp_uart1";
 
@@ -14,7 +14,7 @@
 		bias-disable;
 	};
 
-	blsp1_uart1_sleep: blsp1-uart1-sleep {
+	blsp1_uart1_sleep: blsp1-uart1-sleep-state {
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "gpio";
 
@@ -22,7 +22,7 @@
 		bias-pull-down;
 	};
 
-	blsp1_uart2_default: blsp1-uart2-default {
+	blsp1_uart2_default: blsp1-uart2-default-state {
 		pins = "gpio4", "gpio5";
 		function = "blsp_uart2";
 
@@ -30,7 +30,7 @@
 		bias-disable;
 	};
 
-	blsp1_uart2_sleep: blsp1-uart2-sleep {
+	blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 		pins = "gpio4", "gpio5";
 		function = "gpio";
 
@@ -38,14 +38,15 @@
 		bias-pull-down;
 	};
 
-	spi1_default: spi1-default {
-		pins = "gpio0", "gpio1", "gpio3";
-		function = "blsp_spi1";
+	spi1_default: spi1-default-state {
+		spi-pins {
+			pins = "gpio0", "gpio1", "gpio3";
+			function = "blsp_spi1";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio2";
 			function = "gpio";
 
@@ -55,7 +56,7 @@
 		};
 	};
 
-	spi1_sleep: spi1-sleep {
+	spi1_sleep: spi1-sleep-state {
 		pins = "gpio0", "gpio1", "gpio2", "gpio3";
 		function = "gpio";
 
@@ -63,14 +64,15 @@
 		bias-pull-down;
 	};
 
-	spi2_default: spi2-default {
-		pins = "gpio4", "gpio5", "gpio7";
-		function = "blsp_spi2";
+	spi2_default: spi2-default-state {
+		spi-pins {
+			pins = "gpio4", "gpio5", "gpio7";
+			function = "blsp_spi2";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio6";
 			function = "gpio";
 
@@ -80,7 +82,7 @@
 		};
 	};
 
-	spi2_sleep: spi2-sleep {
+	spi2_sleep: spi2-sleep-state {
 		pins = "gpio4", "gpio5", "gpio6", "gpio7";
 		function = "gpio";
 
@@ -88,14 +90,15 @@
 		bias-pull-down;
 	};
 
-	spi3_default: spi3-default {
-		pins = "gpio8", "gpio9", "gpio11";
-		function = "blsp_spi3";
+	spi3_default: spi3-default-state {
+		spi-pins {
+			pins = "gpio8", "gpio9", "gpio11";
+			function = "blsp_spi3";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio10";
 			function = "gpio";
 
@@ -105,7 +108,7 @@
 		};
 	};
 
-	spi3_sleep: spi3-sleep {
+	spi3_sleep: spi3-sleep-state {
 		pins = "gpio8", "gpio9", "gpio10", "gpio11";
 		function = "gpio";
 
@@ -113,14 +116,15 @@
 		bias-pull-down;
 	};
 
-	spi4_default: spi4-default {
-		pins = "gpio12", "gpio13", "gpio15";
-		function = "blsp_spi4";
-
-		drive-strength = <12>;
-		bias-disable;
+	spi4_default: spi4-default-state {
+		spi-pins {
+			pins = "gpio12", "gpio13", "gpio15";
+			function = "blsp_spi4";
 
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio14";
 			function = "gpio";
 
@@ -130,7 +134,7 @@
 		};
 	};
 
-	spi4_sleep: spi4-sleep {
+	spi4_sleep: spi4-sleep-state {
 		pins = "gpio12", "gpio13", "gpio14", "gpio15";
 		function = "gpio";
 
@@ -138,14 +142,15 @@
 		bias-pull-down;
 	};
 
-	spi5_default: spi5-default {
-		pins = "gpio16", "gpio17", "gpio19";
-		function = "blsp_spi5";
+	spi5_default: spi5-default-state {
+		spi-pins {
+			pins = "gpio16", "gpio17", "gpio19";
+			function = "blsp_spi5";
 
-		drive-strength = <12>;
-		bias-disable;
-
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio18";
 			function = "gpio";
 
@@ -155,7 +160,7 @@
 		};
 	};
 
-	spi5_sleep: spi5-sleep {
+	spi5_sleep: spi5-sleep-state {
 		pins = "gpio16", "gpio17", "gpio18", "gpio19";
 		function = "gpio";
 
@@ -163,14 +168,15 @@
 		bias-pull-down;
 	};
 
-	spi6_default: spi6-default {
-		pins = "gpio20", "gpio21", "gpio23";
-		function = "blsp_spi6";
-
-		drive-strength = <12>;
-		bias-disable;
+	spi6_default: spi6-default-state {
+		spi-pins {
+			pins = "gpio20", "gpio21", "gpio23";
+			function = "blsp_spi6";
 
-		cs {
+			drive-strength = <12>;
+			bias-disable;
+		};
+		cs-pins {
 			pins = "gpio22";
 			function = "gpio";
 
@@ -180,7 +186,7 @@
 		};
 	};
 
-	spi6_sleep: spi6-sleep {
+	spi6_sleep: spi6-sleep-state {
 		pins = "gpio20", "gpio21", "gpio22", "gpio23";
 		function = "gpio";
 
@@ -188,7 +194,7 @@
 		bias-pull-down;
 	};
 
-	i2c1_default: i2c1-default {
+	i2c1_default: i2c1-default-state {
 		pins = "gpio2", "gpio3";
 		function = "blsp_i2c1";
 
@@ -196,7 +202,7 @@
 		bias-disable;
 	};
 
-	i2c1_sleep: i2c1-sleep {
+	i2c1_sleep: i2c1-sleep-state {
 		pins = "gpio2", "gpio3";
 		function = "gpio";
 
@@ -204,7 +210,7 @@
 		bias-disable;
 	};
 
-	i2c2_default: i2c2-default {
+	i2c2_default: i2c2-default-state {
 		pins = "gpio6", "gpio7";
 		function = "blsp_i2c2";
 
@@ -212,7 +218,7 @@
 		bias-disable;
 	};
 
-	i2c2_sleep: i2c2-sleep {
+	i2c2_sleep: i2c2-sleep-state {
 		pins = "gpio6", "gpio7";
 		function = "gpio";
 
@@ -220,7 +226,7 @@
 		bias-disable;
 	};
 
-	i2c3_default: i2c3-default {
+	i2c3_default: i2c3-default-state {
 		pins = "gpio10", "gpio11";
 		function = "blsp_i2c3";
 
@@ -228,7 +234,7 @@
 		bias-disable;
 	};
 
-	i2c3_sleep: i2c3-sleep {
+	i2c3_sleep: i2c3-sleep-state {
 		pins = "gpio10", "gpio11";
 		function = "gpio";
 
@@ -236,7 +242,7 @@
 		bias-disable;
 	};
 
-	i2c4_default: i2c4-default {
+	i2c4_default: i2c4-default-state {
 		pins = "gpio14", "gpio15";
 		function = "blsp_i2c4";
 
@@ -244,7 +250,7 @@
 		bias-disable;
 	};
 
-	i2c4_sleep: i2c4-sleep {
+	i2c4_sleep: i2c4-sleep-state {
 		pins = "gpio14", "gpio15";
 		function = "gpio";
 
@@ -252,7 +258,7 @@
 		bias-disable;
 	};
 
-	i2c5_default: i2c5-default {
+	i2c5_default: i2c5-default-state {
 		pins = "gpio18", "gpio19";
 		function = "blsp_i2c5";
 
@@ -260,7 +266,7 @@
 		bias-disable;
 	};
 
-	i2c5_sleep: i2c5-sleep {
+	i2c5_sleep: i2c5-sleep-state {
 		pins = "gpio18", "gpio19";
 		function = "gpio";
 
@@ -268,7 +274,7 @@
 		bias-disable;
 	};
 
-	i2c6_default: i2c6-default {
+	i2c6_default: i2c6-default-state {
 		pins = "gpio22", "gpio23";
 		function = "blsp_i2c6";
 
@@ -276,7 +282,7 @@
 		bias-disable;
 	};
 
-	i2c6_sleep: i2c6-sleep {
+	i2c6_sleep: i2c6-sleep-state {
 		pins = "gpio22", "gpio23";
 		function = "gpio";
 
@@ -284,14 +290,14 @@
 		bias-disable;
 	};
 
-	pmx-sdc1-clk {
-		sdc1_clk_on: clk-on {
+	pmx-sdc1-clk-state {
+		sdc1_clk_on: clk-on-pins {
 			pins = "sdc1_clk";
 
 			bias-disable;
 			drive-strength = <16>;
 		};
-		sdc1_clk_off: clk-off {
+		sdc1_clk_off: clk-off-pins {
 			pins = "sdc1_clk";
 
 			bias-disable;
@@ -299,14 +305,14 @@
 		};
 	};
 
-	pmx-sdc1-cmd {
-		sdc1_cmd_on: cmd-on {
+	pmx-sdc1-cmd-state {
+		sdc1_cmd_on: cmd-on-pins {
 			pins = "sdc1_cmd";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc1_cmd_off: cmd-off {
+		sdc1_cmd_off: cmd-off-pins {
 			pins = "sdc1_cmd";
 
 			bias-pull-up;
@@ -314,14 +320,14 @@
 		};
 	};
 
-	pmx-sdc1-data {
-		sdc1_data_on: data-on {
+	pmx-sdc1-data-state {
+		sdc1_data_on: data-on-pins {
 			pins = "sdc1_data";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc1_data_off: data-off {
+		sdc1_data_off: data-off-pins {
 			pins = "sdc1_data";
 
 			bias-pull-up;
@@ -329,14 +335,14 @@
 		};
 	};
 
-	pmx-sdc2-clk {
-		sdc2_clk_on: clk-on {
+	pmx-sdc2-clk-state {
+		sdc2_clk_on: clk-on-pins {
 			pins = "sdc2_clk";
 
 			bias-disable;
 			drive-strength = <16>;
 		};
-		sdc2_clk_off: clk-off {
+		sdc2_clk_off: clk-off-pins {
 			pins = "sdc2_clk";
 
 			bias-disable;
@@ -344,14 +350,14 @@
 		};
 	};
 
-	pmx-sdc2-cmd {
-		sdc2_cmd_on: cmd-on {
+	pmx-sdc2-cmd-state {
+		sdc2_cmd_on: cmd-on-pins {
 			pins = "sdc2_cmd";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc2_cmd_off: cmd-off {
+		sdc2_cmd_off: cmd-off-pins {
 			pins = "sdc2_cmd";
 
 			bias-pull-up;
@@ -359,14 +365,14 @@
 		};
 	};
 
-	pmx-sdc2-data {
-		sdc2_data_on: data-on {
+	pmx-sdc2-data-state {
+		sdc2_data_on: data-on-pins {
 			pins = "sdc2_data";
 
 			bias-pull-up;
 			drive-strength = <10>;
 		};
-		sdc2_data_off: data-off {
+		sdc2_data_off: data-off-pins {
 			pins = "sdc2_data";
 
 			bias-pull-up;
@@ -374,15 +380,15 @@
 		};
 	};
 
-	pmx-sdc2-cd-pin {
-		sdc2_cd_on: cd-on {
+	pmx-sdc2-cd-pin-state {
+		sdc2_cd_on: cd-on-pins {
 			pins = "gpio38";
 			function = "gpio";
 
 			drive-strength = <2>;
 			bias-pull-up;
 		};
-		sdc2_cd_off: cd-off {
+		sdc2_cd_off: cd-off-pins {
 			pins = "gpio38";
 			function = "gpio";
 
@@ -391,8 +397,8 @@
 		};
 	};
 
-	cdc-pdm-lines {
-		cdc_pdm_lines_act: pdm-lines-on {
+	cdc-pdm-lines-state {
+		cdc_pdm_lines_act: pdm-lines-on-pins {
 			pins = "gpio63", "gpio64", "gpio65", "gpio66",
 			       "gpio67", "gpio68";
 			function = "cdc_pdm0";
@@ -400,7 +406,7 @@
 			drive-strength = <8>;
 			bias-disable;
 		};
-		cdc_pdm_lines_sus: pdm-lines-off {
+		cdc_pdm_lines_sus: pdm-lines-off-pins {
 			pins = "gpio63", "gpio64", "gpio65", "gpio66",
 			       "gpio67", "gpio68";
 			function = "cdc_pdm0";
@@ -410,15 +416,15 @@
 		};
 	};
 
-	ext-pri-tlmm-lines {
-		ext_pri_tlmm_lines_act: ext-pa-on {
+	ext-pri-tlmm-lines-state {
+		ext_pri_tlmm_lines_act: ext-pa-on-pins {
 			pins = "gpio113", "gpio114", "gpio115", "gpio116";
 			function = "pri_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_pri_tlmm_lines_sus: ext-pa-off {
+		ext_pri_tlmm_lines_sus: ext-pa-off-pins {
 			pins = "gpio113", "gpio114", "gpio115", "gpio116";
 			function = "pri_mi2s";
 
@@ -427,15 +433,15 @@
 		};
 	};
 
-	ext-pri-ws-line {
-		ext_pri_ws_act: ext-pa-on {
+	ext-pri-ws-line-state {
+		ext_pri_ws_act: ext-pa-on-pins {
 			pins = "gpio110";
 			function = "pri_mi2s_ws";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_pri_ws_sus: ext-pa-off {
+		ext_pri_ws_sus: ext-pa-off-pins {
 			pins = "gpio110";
 			function = "pri_mi2s_ws";
 
@@ -444,15 +450,15 @@
 		};
 	};
 
-	ext-mclk-tlmm-lines {
-		ext_mclk_tlmm_lines_act: mclk-lines-on {
+	ext-mclk-tlmm-lines-state {
+		ext_mclk_tlmm_lines_act: mclk-lines-on-pins {
 			pins = "gpio116";
 			function = "pri_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_mclk_tlmm_lines_sus: mclk-lines-off {
+		ext_mclk_tlmm_lines_sus: mclk-lines-off-pins {
 			pins = "gpio116";
 			function = "pri_mi2s";
 
@@ -462,15 +468,15 @@
 	};
 
 	/* secondary Mi2S */
-	ext-sec-tlmm-lines {
-		ext_sec_tlmm_lines_act: tlmm-lines-on {
+	ext-sec-tlmm-lines-state {
+		ext_sec_tlmm_lines_act: tlmm-lines-on-pins {
 			pins = "gpio112", "gpio117", "gpio118", "gpio119";
 			function = "sec_mi2s";
 
 			drive-strength = <8>;
 			bias-disable;
 		};
-		ext_sec_tlmm_lines_sus: tlmm-lines-off {
+		ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
 			pins = "gpio112", "gpio117", "gpio118", "gpio119";
 			function = "sec_mi2s";
 
@@ -479,40 +485,38 @@
 		};
 	};
 
-	cdc-dmic-lines {
-		cdc_dmic_lines_act: dmic-lines-on {
-			clk {
-				pins = "gpio0";
-				function = "dmic0_clk";
+	cdc_dmic_lines_act: cdc-dmic-lines-on-state {
+		clk-pins {
+			pins = "gpio0";
+			function = "dmic0_clk";
 
-				drive-strength = <8>;
-			};
-			data {
-				pins = "gpio1";
-				function = "dmic0_data";
+			drive-strength = <8>;
+		};
+		data-pins {
+			pins = "gpio1";
+			function = "dmic0_data";
 
-				drive-strength = <8>;
-			};
+			drive-strength = <8>;
 		};
-		cdc_dmic_lines_sus: dmic-lines-off {
-			clk {
-				pins = "gpio0";
-				function = "dmic0_clk";
+	};
+	cdc_dmic_lines_sus: cdc-dmic-lines-off-state {
+		clk-pins {
+			pins = "gpio0";
+			function = "dmic0_clk";
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-			data {
-				pins = "gpio1";
-				function = "dmic0_data";
+			drive-strength = <2>;
+			bias-disable;
+		};
+		data-pins {
+			pins = "gpio1";
+			function = "dmic0_data";
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
-	wcnss_pin_a: wcnss-active {
+	wcnss_pin_a: wcnss-active-state {
 		pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
 		function = "wcss_wlan";
 
@@ -520,7 +524,7 @@
 		bias-pull-up;
 	};
 
-	cci0_default: cci0-default {
+	cci0_default: cci0-default-state {
 		pins = "gpio29", "gpio30";
 		function = "cci_i2c";
 
@@ -528,22 +532,22 @@
 		bias-disable;
 	};
 
-	camera_front_default: camera-front-default {
-		pwdn {
+	camera_front_default: camera-front-default-state {
+		pwdn-pins {
 			pins = "gpio33";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		rst {
+		rst-pins {
 			pins = "gpio28";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		mclk1 {
+		mclk1-pins {
 			pins = "gpio27";
 			function = "cam_mclk1";
 
@@ -552,22 +556,22 @@
 		};
 	};
 
-	camera_rear_default: camera-rear-default {
-		pwdn {
+	camera_rear_default: camera-rear-default-state {
+		pwdn-pins {
 			pins = "gpio34";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		rst {
+		rst-pins {
 			pins = "gpio35";
 			function = "gpio";
 
 			drive-strength = <16>;
 			bias-disable;
 		};
-		mclk0 {
+		mclk0-pins {
 			pins = "gpio26";
 			function = "cam_mclk0";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
index 539823b2c36e..8cac23b5240c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -47,7 +47,7 @@
 };
 
 &rpm_requests {
-	smd_rpm_regulators: pm8916-regulators {
+	smd_rpm_regulators: regulators {
 		compatible = "qcom,rpm-pm8916-regulators";
 
 		/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 3255bd3fcb55..d600916a0e55 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -23,6 +23,17 @@
 		};
 	};
 
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_pwm_default>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -61,6 +72,24 @@
 		};
 	};
 
+	/*
+	 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+	 * driver IC but A3 connects the same signal to an ENABLE pin of
+	 * the driver.
+	 */
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_en_default>;
+	};
+
 	reg_vdd_tsp_a: regulator-vdd-tsp-a {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_tsp_a";
@@ -144,7 +173,7 @@
 			interrupt-parent = <&msmgpio>;
 			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 
-			en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+			en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>;
 			wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
 
 			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
@@ -153,6 +182,16 @@
 			pinctrl-0 = <&nfc_default &nfc_clk_req>;
 		};
 	};
+
+	vibrator: vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+		status = "disabled";
+	};
 };
 
 &blsp_i2c2 {
@@ -348,7 +387,7 @@
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -356,7 +395,7 @@
 		bias-disable;
 	};
 
-	fg_alert_default: fg-alert-default {
+	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -364,7 +403,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
@@ -372,7 +411,7 @@
 		bias-pull-up;
 	};
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio52";
 		function = "gpio";
 
@@ -380,47 +419,60 @@
 		bias-disable;
 	};
 
-	mdss {
-		mdss_default: mdss-default {
-			pins = "gpio25";
-			function = "gpio";
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
 
-			drive-strength = <8>;
-			bias-disable;
-		};
-		mdss_sleep: mdss-sleep {
-			pins = "gpio25";
-			function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
 
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	muic_i2c_default: muic-i2c-default {
-		pins = "gpio105", "gpio106";
+	motor_en_default: motor-en-default-stae {
+		pins = "gpio76";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	muic_int_default: muic-int-default {
-		pins = "gpio12";
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
-		pins = "gpio20", "gpio49";
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
 		function = "gpio";
 
 		drive-strength = <2>;
 		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
 
-		irq {
+		irq-pins {
 			pins = "gpio21";
 			function = "gpio";
 
@@ -429,7 +481,7 @@
 		};
 	};
 
-	nfc_i2c_default: nfc-i2c-default {
+	nfc_i2c_default: nfc-i2c-default-state {
 		pins = "gpio0", "gpio1";
 		function = "gpio";
 
@@ -437,7 +489,7 @@
 		bias-disable;
 	};
 
-	tkey_default: tkey-default {
+	tkey_default: tkey-default-state {
 		pins = "gpio98";
 		function = "gpio";
 
@@ -445,7 +497,7 @@
 		bias-disable;
 	};
 
-	tkey_i2c_default: tkey-i2c-default {
+	tkey_i2c_default: tkey-i2c-default-state {
 		pins = "gpio16", "gpio17";
 		function = "gpio";
 
@@ -453,7 +505,7 @@
 		bias-disable;
 	};
 
-	tsp_en_default: tsp-en-default {
+	tsp_en_default: tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
 
@@ -461,7 +513,7 @@
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 6db5f78ca286..c691cca2eb45 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -81,6 +81,10 @@
 	};
 };
 
+&clk_pwm {
+	status = "okay";
+};
+
 &dsi0 {
 	panel@0 {
 		reg = <0>;
@@ -104,8 +108,12 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&vibrator {
+	status = "okay";
+};
+
 &msmgpio {
-	panel_vdd3_default: panel-vdd3-default {
+	panel_vdd3_default: panel-vdd3-default-state {
 		pins = "gpio9";
 		function = "gpio";
 
@@ -113,7 +121,7 @@
 		bias-disable;
 	};
 
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio86";
 		function = "gpio";
 
@@ -121,7 +129,7 @@
 		bias-disable;
 	};
 
-	tkey_led_en_default: tkey-led-en-default {
+	tkey_led_en_default: tkey-led-en-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 5fb8ecd0c9ca..3dd819458785 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -50,6 +50,10 @@
 	};
 };
 
+&clk_pwm {
+	status = "okay";
+};
+
 &pronto {
 	iris {
 		compatible = "qcom,wcn3660b";
@@ -61,8 +65,12 @@
 	vdd-supply = <&reg_touch_key>;
 };
 
+&vibrator {
+	status = "okay";
+};
+
 &msmgpio {
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 542010fdfb8a..c95f0b4bc61f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -26,19 +26,6 @@
 		};
 	};
 
-	reg_motor_vdd: regulator-motor-vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "motor_vdd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&motor_en_default>;
-	};
-
 	reg_touch_key: regulator-touch-key {
 		compatible = "regulator-fixed";
 		regulator-name = "touch_key";
@@ -61,21 +48,18 @@
 	/delete-node/ magnetometer@12;
 };
 
+&reg_motor_vdd {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
 &touchkey {
 	vcc-supply = <&reg_touch_key>;
 	vdd-supply = <&reg_touch_key>;
 };
 
 &msmgpio {
-	motor_en_default: motor-en-default {
-		pins = "gpio76";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index bc7134698978..a3d572d851ef 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -46,7 +46,7 @@
 };
 
 &msmgpio {
-	gpio_leds_default: gpio-led-default {
+	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index eabeed18cfaa..7ac49a021563 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -199,7 +199,7 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index bbd6bb3f4fd7..d4984b3af802 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2019 Stephan Gerhold
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -422,7 +424,7 @@
 };
 
 &msmgpio {
-	fg_alert_default: fg-alert-default {
+	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
 
@@ -430,7 +432,7 @@
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio109";
 		function = "gpio";
 
@@ -438,7 +440,7 @@
 		bias-pull-up;
 	};
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio52";
 		function = "gpio";
 
@@ -446,7 +448,7 @@
 		bias-disable;
 	};
 
-	imu_irq_default: imu-irq-default {
+	imu_irq_default: imu-irq-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -454,7 +456,7 @@
 		bias-disable;
 	};
 
-	muic_i2c_default: muic-i2c-default {
+	muic_i2c_default: muic-i2c-default-state {
 		pins = "gpio105", "gpio106";
 		function = "gpio";
 
@@ -462,7 +464,7 @@
 		bias-disable;
 	};
 
-	muic_irq_default: muic-irq-default {
+	muic_irq_default: muic-irq-default-state {
 		pins = "gpio12";
 		function = "gpio";
 
@@ -470,14 +472,15 @@
 		bias-disable;
 	};
 
-	nfc_default: nfc-default {
-		pins = "gpio20", "gpio49";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
 
-		irq {
+			drive-strength = <2>;
+			bias-disable;
+		};
+		irq-pins {
 			pins = "gpio21";
 			function = "gpio";
 
@@ -486,7 +489,7 @@
 		};
 	};
 
-	nfc_i2c_default: nfc-i2c-default {
+	nfc_i2c_default: nfc-i2c-default-state {
 		pins = "gpio0", "gpio1";
 		function = "gpio";
 
@@ -494,7 +497,7 @@
 		bias-disable;
 	};
 
-	tkey_default: tkey-default {
+	tkey_default: tkey-default-state {
 		pins = "gpio98";
 		function = "gpio";
 
@@ -502,7 +505,7 @@
 		bias-disable;
 	};
 
-	tkey_en_default: tkey-en-default {
+	tkey_en_default: tkey-en-default-state {
 		pins = "gpio86";
 		function = "gpio";
 
@@ -510,7 +513,7 @@
 		bias-disable;
 	};
 
-	tkey_i2c_default: tkey-i2c-default {
+	tkey_i2c_default: tkey-i2c-default-state {
 		pins = "gpio16", "gpio17";
 		function = "gpio";
 
@@ -518,7 +521,7 @@
 		bias-disable;
 	};
 
-	tkey_led_en_default: tkey-led-en-default {
+	tkey_led_en_default: tkey-led-en-default-state {
 		pins = "gpio60";
 		function = "gpio";
 
@@ -526,7 +529,7 @@
 		bias-disable;
 	};
 
-	tsp_en_default: tsp-en-default {
+	tsp_en_default: tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
 
@@ -534,7 +537,7 @@
 		bias-disable;
 	};
 
-	tsp_irq_default: tsp-irq-default {
+	tsp_irq_default: tsp-irq-default-state {
 		pins = "gpio13";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 84a352dcf9a2..a87be1d95b14 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2020 Stephan Gerhold
+/*
+ * Copyright (C) 2020 Stephan Gerhold
+ */
 
 /dts-v1/;
 
@@ -21,6 +23,20 @@
 		stdout-path = "serial0";
 	};
 
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -272,7 +288,15 @@
 };
 
 &msmgpio {
-	gpio_keys_default: gpio-keys-default {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -280,7 +304,7 @@
 		bias-pull-up;
 	};
 
-	imu_default: imu-default {
+	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
 
@@ -288,14 +312,15 @@
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen-default {
-		pins = "gpio13";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-pull-up;
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
 
-		reset {
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		reset-pins {
 			pins = "gpio12";
 			function = "gpio";
 
@@ -304,7 +329,7 @@
 		};
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a831064700ee..2ca8e977fc2a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1046,7 +1046,6 @@
 					      "pixel",
 					      "core";
 				phys = <&dsi_phy0>;
-				phy-names = "dsi-phy";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1070,7 +1069,7 @@
 				};
 			};
 
-			dsi_phy0: dsi-phy@1a98300 {
+			dsi_phy0: phy@1a98300 {
 				compatible = "qcom,dsi-phy-28nm-lp";
 				reg = <0x01a98300 0xd4>,
 				      <0x01a98500 0x280>,
@@ -1264,21 +1263,21 @@
 			clock-names = "iface", "bus";
 			qcom,iommu-secure-id = <17>;
 
-			// vfe:
+			/* VFE */
 			iommu-ctx@3000 {
 				compatible = "qcom,msm-iommu-v1-sec";
 				reg = <0x3000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// mdp_0:
+			/* MDP_0 */
 			iommu-ctx@4000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x4000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// venus_ns:
+			/* VENUS_NS */
 			iommu-ctx@5000 {
 				compatible = "qcom,msm-iommu-v1-sec";
 				reg = <0x5000 0x1000>;
@@ -1297,14 +1296,14 @@
 			clock-names = "iface", "bus";
 			qcom,iommu-secure-id = <18>;
 
-			// gfx3d_user:
+			/* GFX3D_USER */
 			iommu-ctx@1000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x1000 0x1000>;
 				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			// gfx3d_priv:
+			/* GFX3D_PRIV */
 			iommu-ctx@2000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x2000 0x1000>;
@@ -1345,7 +1344,7 @@
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
@@ -1438,7 +1437,7 @@
 
 		lpass: audio-controller@7708000 {
 			status = "disabled";
-			compatible = "qcom,lpass-cpu-apq8016";
+			compatible = "qcom,apq8016-lpass-cpu";
 
 			/*
 			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..32349174c4bd 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -460,229 +460,229 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			uart_console_active: uart-console-active-pins {
+			uart_console_active: uart-console-active-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			uart_console_sleep: uart-console-sleep-pins {
+			uart_console_sleep: uart-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			sdc1_clk_on: sdc1-clk-on-pins {
+			sdc1_clk_on: sdc1-clk-on-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <16>;
 			};
 
-			sdc1_clk_off: sdc1-clk-off-pins {
+			sdc1_clk_off: sdc1-clk-off-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_cmd_on: sdc1-cmd-on-pins {
+			sdc1_cmd_on: sdc1-cmd-on-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <10>;
 			};
 
-			sdc1_cmd_off: sdc1-cmd-off-pins {
+			sdc1_cmd_off: sdc1-cmd-off-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_data_on: sdc1-data-on-pins {
+			sdc1_data_on: sdc1-data-on-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc1_data_off: sdc1-data-off-pins {
+			sdc1_data_off: sdc1-data-off-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_rclk_on: sdc1-rclk-on-pins {
+			sdc1_rclk_on: sdc1-rclk-on-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc1_rclk_off: sdc1-rclk-off-pins {
+			sdc1_rclk_off: sdc1-rclk-off-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc2_clk_on: sdc2-clk-on-pins {
+			sdc2_clk_on: sdc2-clk-on-state {
 				pins = "sdc2_clk";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			sdc2_clk_off: sdc2-clk-off-pins {
+			sdc2_clk_off: sdc2-clk-off-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc2_cmd_on: sdc2-cmd-on-pins {
+			sdc2_cmd_on: sdc2-cmd-on-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_cmd_off: sdc2-cmd-off-pins {
+			sdc2_cmd_off: sdc2-cmd-off-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_data_on: sdc2-data-on-pins {
+			sdc2_data_on: sdc2-data-on-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_data_off: sdc2-data-off-pins {
+			sdc2_data_off: sdc2-data-off-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_cd_on: cd-on-pins {
+			sdc2_cd_on: cd-on-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			sdc2_cd_off: cd-off-pins {
+			sdc2_cd_off: cd-off-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			gpio_key_default: gpio-key-default-pins {
+			gpio_key_default: gpio-key-default-state {
 				pins = "gpio85";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c_1_default: i2c-1-default-pins {
+			i2c_1_default: i2c-1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_1_sleep: i2c-1-sleep-pins {
+			i2c_1_sleep: i2c-1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_default: i2c-2-default-pins {
+			i2c_2_default: i2c-2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_sleep: i2c-2-sleep-pins {
+			i2c_2_sleep: i2c-2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_default: i2c-3-default-pins {
+			i2c_3_default: i2c-3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_sleep: i2c-3-sleep-pins {
+			i2c_3_sleep: i2c-3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_default: i2c-4-default-pins {
+			i2c_4_default: i2c-4-default-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_sleep: i2c-4-sleep-pins {
+			i2c_4_sleep: i2c-4-sleep-state {
 				pins = "gpio14", "gpio15";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_default: i2c-5-default-pins {
+			i2c_5_default: i2c-5-default-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_sleep: i2c-5-sleep-pins {
+			i2c_5_sleep: i2c-5-sleep-state {
 				pins = "gpio18", "gpio19";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_default: i2c-6-default-pins {
+			i2c_6_default: i2c-6-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_sleep: i2c-6-sleep-pins {
+			i2c_6_sleep: i2c-6-sleep-state {
 				pins = "gpio22", "gpio23";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_default: i2c-7-default-pins {
+			i2c_7_default: i2c-7-default-state {
 				pins = "gpio135", "gpio136";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_sleep: i2c-7-sleep-pins {
+			i2c_7_sleep: i2c-7-sleep-state {
 				pins = "gpio135", "gpio136";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_default: i2c-8-default-pins {
+			i2c_8_default: i2c-8-default-state {
 				pins = "gpio98", "gpio99";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_sleep: i2c-8-sleep-pins {
+			i2c_8_sleep: i2c-8-sleep-state {
 				pins = "gpio98", "gpio99";
 				function = "gpio";
 				drive-strength = <2>;
@@ -726,6 +726,250 @@
 			reg = <0x193f044 0x4>;
 		};
 
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x1a00000 0x1000>,
+			      <0x1ab0000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: mdp@1a01000 {
+				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
+				reg = <0x1a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>,
+							 <&dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x1a94400 0x100>,
+				      <0x1a94500 0x300>,
+				      <0x1a94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a96000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>,
+							 <&dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi1_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi1_phy: phy@1a96400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x1a96400 0x100>,
+				      <0x1a96500 0x300>,
+				      <0x1a96800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		apps_iommu: iommu@1e00000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
+			ranges  = <0 0x1e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x200f000 0x1000>,
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 000000000000..3fb8e23e4330
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X Compact";
+	compatible = "sony,kugo-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	/* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+	status = "okay";
+
+	/* ST STMVL53L0 ToF @ 29 */
+	/* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1300000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 000000000000..87d657f6806b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X";
+	compatible = "sony,suzu-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 000000000000..67baced639c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		cont-splash@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+		};
+
+		ramoops@57f00000 {
+			compatible = "ramoops";
+			reg = <0 0x57f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usbphy_1p2: regulator-usbphy-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbphy-1p2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+	status = "okay";
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <790000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-always-on;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <290000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-system-load = <130000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2400000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <60000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	/* Toshiba THGBMHG8C4LBAU7 (032G34) */
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&usbphy_1p2>;
+	vdda1p8-supply = <&pm8950_l7>;
+	vdda3p3-supply = <&pm8950_l13>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi
new file mode 100644
index 000000000000..e432512d8716
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8976.dtsi"
+
+&pmu {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+};
+
+/*
+ * You might be wondering.. why is it so empty out there?
+ * Well, the SoCs are almost identical.
+ */
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
new file mode 100644
index 000000000000..05dcb30b0779
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -0,0 +1,1198 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8976.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <181>;
+				exit-latency-us = <149>;
+				min-residency-us = <703>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <142>;
+				exit-latency-us = <99>;
+				min-residency-us = <242>;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <158>;
+				exit-latency-us = <144>;
+				min-residency-us = <863>;
+				local-timer-stop;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8976", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ext-region@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x5600000>;
+			no-map;
+		};
+
+		lpass_mem: lpass@8c200000 {
+			reg = <0x0 0x8c200000 0x0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x2600000>;
+			no-map;
+		};
+
+		tz-apps@8dd00000 {
+			reg = <0x0 0x8dd00000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+		qcom,smem = <443>, <429>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 13>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+		qcom,smem = <435>, <428>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 17>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+		qcom,smem = <451>, <431>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 12>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 18>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <0 290 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc RST_QUSB2_PHY_BCR>,
+				 <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_caldata: caldata@218 {
+				reg = <0x218 0x18>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_caldata>;
+			nvmem-cell-names = "calib";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8976-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 145>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			spi1_default: spi0-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "blsp_spi1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi1_sleep: spi0-sleep-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_active: blsp2-uart2-active-state {
+				pins = "gpio20", "gpio21";
+				function = "blsp_uart6";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8976";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			assigned-clocks = <&gcc GPLL3>;
+			assigned-clock-rates = <1100000000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "xo_a",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,msm8976-tcsr", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		sdhc_1: mmc@7824000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		otg: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc RST_USB_HS_BCR>;
+			reset-names = "core";
+			ahb-burst-config = <0>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		sdhc_3: mmc@7a24000 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@7af0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07af0000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c4: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8976-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		imem: sram@8600000 {
+			compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		qdsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+			trips {
+				qdsp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-isp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+			trips {
+				cam_isp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu4_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu5_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu6_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu7_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				l2_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				l2_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				l2_crit: l2-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				gpu_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
index 7e6bce4af441..4159fc35571a 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
index e6a5ebd30e2f..ad9702dd171b 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 71e373b11de9..87c90e93667f 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
@@ -58,7 +59,7 @@
 };
 
 &rpm_requests {
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_l1-supply = <&pm8994_s1>;
@@ -236,9 +237,11 @@
 		};
 
 		pm8994_l26: l26 {
-			/* TODO: value from downstream
-			regulator-min-microvolt = <987500>;
-			fails to apply */
+			/*
+			 * TODO: value from downstream
+			 * regulator-min-microvolt = <987500>;
+			 * fails to apply
+			 */
 		};
 
 		pm8994_l27: l27 {
@@ -252,19 +255,19 @@
 		};
 
 		pm8994_l29: l29 {
-			/* TODO: Unsupported voltage range.
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			qcom,init-voltage = <2800000>;
-			*/
+			/*
+			 * TODO: Unsupported voltage range.
+			 * regulator-min-microvolt = <2800000>;
+			 * regulator-max-microvolt = <2800000>;
+			 */
 		};
 
 		pm8994_l30: l30 {
-			/* TODO: get this verified
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
+			/*
+			 * TODO: get this verified
+			 * regulator-min-microvolt = <1800000>;
+			 * regulator-max-microvolt = <1800000>;
+			 */
 		};
 
 		pm8994_l31: l31 {
@@ -273,15 +276,15 @@
 		};
 
 		pm8994_l32: l32 {
-			/* TODO: get this verified
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
+			/*
+			 * TODO: get this verified
+			 * regulator-min-microvolt = <1800000>;
+			 * regulator-max-microvolt = <1800000>;
+			 */
 		};
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index c4e87d0aec42..b242c272d2af 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -153,7 +153,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_l1-supply = <&pm8994_s7>;
@@ -363,7 +363,7 @@
 		pm8994_lvs2: lvs2 {};
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 		vdd_s1-supply = <&vph_pwr>;
 		vdd_bst_byp-supply = <&vph_pwr>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 750643763a76..10adb4986ef1 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include "msm8994.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index dbfbb77e9ff5..85abff0e9b3f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, Huawei Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
  */
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index f9d8bd09e074..9b67f0d3820c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -551,7 +551,7 @@
 
 &rpm_requests {
 	/* These values were taken from the original firmware ACPI tables */
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -835,7 +835,7 @@
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -881,28 +881,28 @@
 };
 
 &tlmm {
-	grip_default: grip-default {
+	grip_default: grip-default-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <6>;
 		bias-pull-down;
 	};
 
-	grip_sleep: grip-sleep {
+	grip_sleep: grip-sleep-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	hall_front_default: hall-front-default {
+	hall_front_default: hall-front-default-state {
 		pins = "gpio42";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	hall_back_default: hall-back-default {
+	hall_back_default: hall-back-default-state {
 		pins = "gpio75";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index ff60b7004d26..f3d153c34918 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -186,7 +186,7 @@
 
 &rpm_requests {
 	/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
-	pmi8994_regulators: pmi8994-regulators {
+	pmi8994_regulators: regulators-0 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -205,7 +205,7 @@
 		};
 	};
 
-	pm8994_regulators: pm8994-regulators {
+	pm8994_regulators: regulators-1 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s3-supply = <&vph_pwr>;
@@ -477,15 +477,17 @@
 };
 
 &tlmm {
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio42";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 		input-enable;
 	};
 
-	ts_reset_active: ts-reset-active {
+	ts_reset_active: ts-reset-active-state {
 		pins = "gpio109";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 		output-low;
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index ded5b7ceeaf9..9ff9d35496d2 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -553,7 +554,6 @@
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			spi-max-frequency = <19200000>;
 			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
@@ -691,7 +691,6 @@
 			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
-			spi-max-frequency = <19200000>;
 			dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
@@ -773,254 +772,256 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				function = "blsp_uart2";
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_uart2_sleep: blsp1-uart2-sleep {
-				function = "gpio";
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 				pins = "gpio4", "gpio5";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart2_default: blsp2-uart2-default {
+			blsp2_uart2_default: blsp2-uart2-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
 				function = "blsp_uart8";
-				pins = "gpio45", "gpio46",
-						"gpio47", "gpio48";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart2_sleep: blsp2-uart2-sleep {
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
 				function = "gpio";
-				pins = "gpio45", "gpio46",
-						"gpio47", "gpio48";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_default: i2c1-default {
-				function = "blsp_i2c1";
+			i2c1_default: i2c1-default-state {
 				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_sleep: i2c1-sleep {
-				function = "gpio";
+			i2c1_sleep: i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_default: i2c2-default {
-				function = "blsp_i2c2";
+			i2c2_default: i2c2-default-state {
 				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_sleep: i2c2-sleep {
-				function = "gpio";
+			i2c2_sleep: i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_default: i2c4-default {
-				function = "blsp_i2c4";
+			i2c4_default: i2c4-default-state {
 				pins = "gpio19", "gpio20";
+				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_sleep: i2c4-sleep {
-				function = "gpio";
+			i2c4_sleep: i2c4-sleep-state {
 				pins = "gpio19", "gpio20";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 				input-enable;
 			};
 
-			i2c5_default: i2c5-default {
-				function = "blsp_i2c5";
+			i2c5_default: i2c5-default-state {
 				pins = "gpio23", "gpio24";
+				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c5_sleep: i2c5-sleep {
-				function = "gpio";
+			i2c5_sleep: i2c5-sleep-state {
 				pins = "gpio23", "gpio24";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_default: i2c6-default {
-				function = "blsp_i2c6";
+			i2c6_default: i2c6-default-state {
 				pins = "gpio28", "gpio27";
+				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_sleep: i2c6-sleep {
-				function = "gpio";
+			i2c6_sleep: i2c6-sleep-state {
 				pins = "gpio28", "gpio27";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_default: i2c7-default {
-				function = "blsp_i2c7";
+			i2c7_default: i2c7-default-state {
 				pins = "gpio44", "gpio43";
+				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_sleep: i2c7-sleep {
-				function = "gpio";
+			i2c7_sleep: i2c7-sleep-state {
 				pins = "gpio44", "gpio43";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_spi10_default: blsp2-spi10-default {
-				default {
-					function = "blsp_spi10";
+			blsp2_spi10_default: blsp2-spi10-default-state {
+				default-pins {
 					pins = "gpio53", "gpio54", "gpio55";
+					function = "blsp_spi10";
 					drive-strength = <10>;
 					bias-pull-down;
 				};
-				cs {
+
+				cs-pins {
+					pins = "gpio67";
 					function = "gpio";
-					pins = "gpio55";
 					drive-strength = <2>;
 					bias-disable;
 				};
 			};
 
-			blsp2_spi10_sleep: blsp2-spi10-sleep {
+			blsp2_spi10_sleep: blsp2-spi10-sleep-state {
 				pins = "gpio53", "gpio54", "gpio55";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c11_default: i2c11-default {
-				function = "blsp_i2c11";
+			i2c11_default: i2c11-default-state {
 				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c11_sleep: i2c11-sleep {
-				function = "gpio";
+			i2c11_sleep: i2c11-sleep-state {
 				pins = "gpio83", "gpio84";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				default {
-					function = "blsp_spi1";
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				default-pins {
 					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
 					drive-strength = <10>;
 					bias-pull-down;
 				};
-				cs {
-					function = "gpio";
+
+				cs-pins {
 					pins = "gpio8";
+					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 			};
 
-			blsp1_spi1_sleep: blsp1-spi1-sleep {
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			sdc1_clk_on: clk-on {
+			sdc1_clk_on: clk-on-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <16>;
 			};
 
-			sdc1_clk_off: clk-off {
+			sdc1_clk_off: clk-off-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_cmd_on: cmd-on {
+			sdc1_cmd_on: cmd-on-state {
 				pins = "sdc1_cmd";
 				bias-pull-up;
 				drive-strength = <8>;
 			};
 
-			sdc1_cmd_off: cmd-off {
+			sdc1_cmd_off: cmd-off-state {
 				pins = "sdc1_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_data_on: data-on {
+			sdc1_data_on: data-on-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <8>;
 			};
 
-			sdc1_data_off: data-off {
+			sdc1_data_off: data-off-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_rclk_on: rclk-on {
+			sdc1_rclk_on: rclk-on-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc1_rclk_off: rclk-off {
+			sdc1_rclk_off: rclk-off-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc2_clk_on: sdc2-clk-on {
+			sdc2_clk_on: sdc2-clk-on-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <10>;
 			};
 
-			sdc2_clk_off: sdc2-clk-off {
+			sdc2_clk_off: sdc2-clk-off-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc2_cmd_on: sdc2-cmd-on {
+			sdc2_cmd_on: sdc2-cmd-on-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_cmd_off: sdc2-cmd-off {
+			sdc2_cmd_off: sdc2-cmd-off-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_data_on: sdc2-data-on {
+			sdc2_data_on: sdc2-data-on-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_data_off: sdc2-data-off {
+			sdc2_data_off: sdc2-data-off-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
new file mode 100644
index 000000000000..20f5c103c63b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -0,0 +1,787 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		constant-charge-current-max-microamp = <3000000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		div1_mclk: div1-clk {
+			compatible = "gpio-gate-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk>;
+			#clock-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		divclk4: div4-clk {
+			compatible = "fixed-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+		};
+	};
+
+	reserved-memory {
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0 0xac000000 0 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x100000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	tfa9890_amp: audio-codec@36 {
+		compatible = "nxp,tfa9890";
+		reg = <0x36>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_gpios>;
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	synaptics_rmi4_i2c: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touch_default>;
+		pinctrl-1 = <&touch_suspend>;
+		vdd-supply = <&vreg_l22a_3p0>;
+		vio-supply = <&vreg_s4a_1p8>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+	status = "okay";
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&dsi0 {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l22a_3p0>;
+	status = "okay";
+};
+
+&dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&hsusb_phy2 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pins = "gpio19";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	audio_mclk: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		power-source = <PM8994_GPIO_S4>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+
+	s10 {
+		qcom,saw-slave;
+	};
+
+	s11 {
+		qcom,saw-leader;
+		regulator-min-microvolt = <1140000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd-gfx";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&q6asmdai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p1: l3 {
+			regulator-name = "vreg_l3a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p6: l17 {
+			regulator-name = "vreg_l17a_2p6";
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+		};
+
+		vreg_l18a_3p3: l18 {
+			regulator-name = "vreg_l18a_3p3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-name = "vreg_l19a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&slpi_pil {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "OnePlus3";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"MIC BIAS2", "Headset Mic",
+			"AMIC4", "MIC BIAS1",
+			"MIC BIAS1", "Primary Mic",
+			"AMIC5", "MIC BIAS3",
+			"MIC BIAS3", "Noise Mic";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	mm7-dai-link {
+		link-name = "MultiMedia7";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
+		};
+	};
+
+	mm8-dai-link {
+		link-name = "MultiMedia8";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
+		};
+	};
+
+	mm9-dai-link {
+		link-name = "MultiMedia9";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
+		};
+	};
+
+	mm10-dai-link {
+		link-name = "MultiMedia10";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
+		};
+	};
+
+	mm11-dai-link {
+		link-name = "MultiMedia11";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
+		};
+	};
+
+	mm12-dai-link {
+		link-name = "MultiMedia12";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
+		};
+	};
+
+	mm13-dai-link {
+		link-name = "MultiMedia13";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
+		};
+	};
+
+	mm14-dai-link {
+		link-name = "MultiMedia14";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
+		};
+	};
+
+	mm15-dai-link {
+		link-name = "MultiMedia15";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
+		};
+	};
+
+	mm16-dai-link {
+		link-name = "MultiMedia16";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+
+	speaker-dai-link {
+		link-name = "Speaker";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		codec {
+			sound-dai = <&tfa9890_amp>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <81 4>;
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend: mdss-dsi-suspend-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default: touch-default-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touch_suspend: touch-suspend-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
new file mode 100644
index 000000000000..1bdc1b134305
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3";
+	compatible = "oneplus,oneplus3", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15801 15>, <8 0 15801 16>;
+	qcom,msm-id = <246 0x30001>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
+	voltage-max-design-microvolt = <4350000>;
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
+			"qcom/msm8996/oneplus3/modem.mbn";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
new file mode 100644
index 000000000000..34f837dd0c12
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3T";
+	compatible = "oneplus,oneplus3t", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15811 26>,
+			<8 0 15811 27>,
+			<8 0 15811 28>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3400000>;
+	voltage-max-design-microvolt = <4400000>;
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
+			"qcom/msm8996/oneplus3t/modem.mbn";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index ca7c8d2e1d3d..dec361b93cce 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -629,7 +629,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -847,28 +847,28 @@
 	pinctrl-0 = <&sw_service_gpio>;
 	pinctrl-names = "default";
 
-	disp_reset_n_gpio: disp-reset-n {
+	disp_reset_n_gpio: disp-reset-n-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	mdp_vsync_p_gpio: mdp-vsync-p {
+	mdp_vsync_p_gpio: mdp-vsync-p-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	sw_service_gpio: sw-service-gpio {
+	sw_service_gpio: sw-service-gpio-state {
 		pins = "gpio16";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
-	usb_detect: usb-detect {
+	usb_detect: usb-detect-state {
 		pins = "gpio25";
 		function = "gpio";
 		drive-strength = <2>;
@@ -876,7 +876,7 @@
 		output-high;
 	};
 
-	uim_detect_en: uim-detect-en {
+	uim_detect_en: uim-detect-en-state {
 		pins = "gpio29";
 		function = "gpio";
 		drive-strength = <2>;
@@ -884,14 +884,14 @@
 		output-high;
 	};
 
-	tray_det_pin: tray-det {
+	tray_det_pin: tray-det-state {
 		pins = "gpio40";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	tp_vddio_en: tp-vddio-en {
+	tp_vddio_en: tp-vddio-en-state {
 		pins = "gpio50";
 		function = "gpio";
 		drive-strength = <2>;
@@ -899,7 +899,7 @@
 		output-high;
 	};
 
-	lcd_vddio_en: lcd-vddio-en {
+	lcd_vddio_en: lcd-vddio-en-state {
 		pins = "gpio51";
 		function = "gpio";
 		drive-strength = <2>;
@@ -907,15 +907,14 @@
 		output-low;
 	};
 
-	wl_host_wake: wl-host-wake {
+	wl_host_wake: wl-host-wake-state {
 		pins = "gpio79";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-high;
 	};
 
-	wl_reg_on: wl-reg-on {
+	wl_reg_on: wl-reg-on-state {
 		pins = "gpio84";
 		function = "gpio";
 		drive-strength = <2>;
@@ -923,20 +922,20 @@
 		output-low;
 	};
 
-	ts_reset_n: ts-rst-n {
+	ts_reset_n: ts-rst-n-state {
 		pins = "gpio89";
 		function = "gpio";
 		drive-strength = <2>;
 	};
 
-	touch_int_n: touch-int-n {
+	touch_int_n: touch-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
-	touch_int_sleep: touch-int-sleep {
+	touch_int_sleep: touch-int-sleep-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 77819186086a..5b47b8de69da 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -3,9 +3,6 @@
  * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
  */
 
-/dts-v1/;
-
-#include "msm8996.dtsi"
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
 #include <dt-bindings/input/input.h>
@@ -413,7 +410,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -598,7 +595,7 @@
 		};
 	};
 
-	pmi8994-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8994-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -694,35 +691,35 @@
 };
 
 &tlmm {
-	mdss_dsi_default: mdss_dsi_default {
+	mdss_dsi_default: mdss-dsi-default-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	mdss_dsi_sleep: mdss_dsi_sleep {
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
 		pins = "gpio8";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	mdss_te_default: mdss_te_default {
+	mdss_te_default: mdss-te-default-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	mdss_te_sleep: mdss_te_sleep {
+	mdss_te_sleep: mdss-te-sleep-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	nfc_default: nfc_default {
+	nfc_default: nfc-default-state {
 		pins = "gpio12", "gpio21";
 		function = "gpio";
 		drive-strength = <16>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 4e5264f4116a..d8734913482f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -219,7 +220,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l17a_2p8: l17 {
 			regulator-name = "vreg_l17a_2p8";
 			regulator-min-microvolt = <2500000>;
@@ -445,28 +446,28 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchscreen_default: touchscreen_default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen_sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	vibrator_default: vibrator_default {
+	vibrator_default: vibrator-default-state {
 		pins = "gpio93";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	vibrator_sleep: vibrator_sleep {
+	vibrator_sleep: vibrator-sleep-state {
 		pins = "gpio93";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c0a2baffa49d..d31464204f69 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -144,82 +145,92 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xd>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x9>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -232,127 +243,137 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0xe>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -860,9 +881,9 @@
 				 <&gcc GPLL0>,
 				 <&dsi0_phy 1>,
 				 <&dsi0_phy 0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>;
 			clock-names = "xo",
 				      "gcc_mmss_noc_cfg_ahb_clk",
 				      "gpll0",
@@ -993,7 +1014,6 @@
 				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -1018,7 +1038,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@994400 {
+			dsi0_phy: phy@994400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00994400 0x100>,
 				      <0x00994500 0x300>,
@@ -1061,7 +1081,6 @@
 				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -1086,7 +1105,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@996400 {
+			dsi1_phy: phy@996400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00996400 0x100>,
 				      <0x00996500 0x300>,
@@ -1145,7 +1164,7 @@
 				};
 			};
 
-			hdmi_phy: hdmi-phy@9a0600 {
+			hdmi_phy: phy@9a0600 {
 				#phy-cells = <0>;
 				compatible = "qcom,hdmi-phy-8996";
 				reg = <0x009a0600 0x1c4>,
@@ -1213,17 +1232,17 @@
 				compatible = "operating-points-v2";
 
 				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
 				 */
 				opp-624000000 {
 					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x09>;
 				};
 				opp-560000000 {
 					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x0d>;
 				};
 				opp-510000000 {
 					opp-hz = /bits/ 64 <510000000>;
@@ -1262,15 +1281,15 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				spi {
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				spi-pins {
 					pins = "gpio0", "gpio1", "gpio3";
 					function = "blsp_spi1";
 					drive-strength = <12>;
 					bias-disable;
 				};
 
-				cs {
+				cs-pins {
 					pins = "gpio2";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1279,42 +1298,56 @@
 				};
 			};
 
-			blsp1_spi1_sleep: blsp1-spi1-sleep {
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+			blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart8";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_default: blsp2-i2c2 {
+			blsp2_i2c2_default: blsp2-i2c2-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			cci0_default: cci0-default {
+			blsp1_i2c6_default: blsp1-i2c6-state {
+				pins = "gpio27", "gpio28";
+				function = "blsp_i2c6";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio27", "gpio28";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
 				pins = "gpio17", "gpio18";
 				function = "cci_i2c";
 				drive-strength = <16>;
@@ -1322,22 +1355,22 @@
 			};
 
 			camera0_state_on:
-			camera_rear_default: camera-rear-default {
-				camera0_mclk: mclk0 {
+			camera_rear_default: camera-rear-default-state {
+				camera0_mclk: mclk0-pins {
 					pins = "gpio13";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera0_rst: rst {
+				camera0_rst: rst-pins {
 					pins = "gpio25";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera0_pwdn: pwdn {
+				camera0_pwdn: pwdn-pins {
 					pins = "gpio26";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1345,7 +1378,7 @@
 				};
 			};
 
-			cci1_default: cci1-default {
+			cci1_default: cci1-default-state {
 				pins = "gpio19", "gpio20";
 				function = "cci_i2c";
 				drive-strength = <16>;
@@ -1353,22 +1386,22 @@
 			};
 
 			camera1_state_on:
-			camera_board_default: camera-board-default {
-				mclk1 {
+			camera_board_default: camera-board-default-state {
+				mclk1-pins {
 					pins = "gpio14";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				pwdn {
+				pwdn-pins {
 					pins = "gpio98";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				rst {
+				rst-pins {
 					pins = "gpio104";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1377,22 +1410,22 @@
 			};
 
 			camera2_state_on:
-			camera_front_default: camera-front-default {
-				camera2_mclk: mclk2 {
+			camera_front_default: camera-front-default-state {
+				camera2_mclk: mclk2-pins {
 					pins = "gpio15";
 					function = "cam_mclk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				camera2_rst: rst {
+				camera2_rst: rst-pins {
 					pins = "gpio23";
 					function = "gpio";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				pwdn {
+				pwdn-pins {
 					pins = "gpio133";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1400,22 +1433,22 @@
 				};
 			};
 
-			pcie0_state_on: pcie0-state-on {
-				perst {
+			pcie0_state_on: pcie0-state-on-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1423,22 +1456,22 @@
 				};
 			};
 
-			pcie0_state_off: pcie0-state-off {
-				perst {
+			pcie0_state_off: pcie0-state-off-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1446,63 +1479,63 @@
 				};
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "blsp_uart2";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_uart2_sleep: blsp1-uart2-sleep {
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
 				pins = "gpio41", "gpio42", "gpio43", "gpio44";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c2-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+			blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_default: blsp2-i2c3 {
+			blsp2_i2c3_default: blsp2-i2c3-state-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
 				pins = "gpio51", "gpio52";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			wcd_intr_default: wcd-intr-default{
+			wcd_intr_default: wcd-intr-default-state {
 				pins = "gpio54";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1510,21 +1543,21 @@
 				input-enable;
 			};
 
-			blsp2_i2c1_default: blsp2-i2c1 {
+			blsp2_i2c1_default: blsp2-i2c1-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
 				pins = "gpio55", "gpio56";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_default: blsp2-i2c5 {
+			blsp2_i2c5_default: blsp2-i2c5-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
@@ -1533,7 +1566,7 @@
 
 			/* Sleep state for BLSP2_I2C5 is missing.. */
 
-			cdc_reset_active: cdc-reset-active {
+			cdc_reset_active: cdc-reset-active-state {
 				pins = "gpio64";
 				function = "gpio";
 				drive-strength = <16>;
@@ -1541,7 +1574,7 @@
 				output-high;
 			};
 
-			cdc_reset_sleep: cdc-reset-sleep {
+			cdc_reset_sleep: cdc-reset-sleep-state {
 				pins = "gpio64";
 				function = "gpio";
 				drive-strength = <16>;
@@ -1549,15 +1582,15 @@
 				output-low;
 			};
 
-			blsp2_spi6_default: blsp2-spi5-default {
-				spi {
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				spi-pins {
 					pins = "gpio85", "gpio86", "gpio88";
 					function = "blsp_spi12";
 					drive-strength = <12>;
 					bias-disable;
 				};
 
-				cs {
+				cs-pins {
 					pins = "gpio87";
 					function = "gpio";
 					drive-strength = <16>;
@@ -1566,43 +1599,43 @@
 				};
 			};
 
-			blsp2_spi6_sleep: blsp2-spi5-sleep {
+			blsp2_spi6_sleep: blsp2-spi6-sleep-state {
 				pins = "gpio85", "gpio86", "gpio87", "gpio88";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6 {
+			blsp2_i2c6_default: blsp2-i2c6-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c12";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			pcie1_state_on: pcie1-state-on {
-				perst {
+			pcie1_state_on: pcie1-on-state {
+				perst-pins {
 					pins = "gpio130";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio131";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio132";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1610,16 +1643,16 @@
 				};
 			};
 
-			pcie1_state_off: pcie1-state-off {
+			pcie1_state_off: pcie1-off-state {
 				/* Perst is missing? */
-				clkreq {
+				clkreq-pins {
 					pins = "gpio131";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio132";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1627,22 +1660,22 @@
 				};
 			};
 
-			pcie2_state_on: pcie2-state-on {
-				perst {
+			pcie2_state_on: pcie2-on-state {
+				perst-pins {
 					pins = "gpio114";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio115";
 					function = "pci_e2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio116";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1650,16 +1683,16 @@
 				};
 			};
 
-			pcie2_state_off: pcie2-state-off {
+			pcie2_state_off: pcie2-off-state {
 				/* Perst is missing? */
-				clkreq {
+				clkreq-pins {
 					pins = "gpio115";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio116";
 					function = "gpio";
 					drive-strength = <2>;
@@ -1667,90 +1700,90 @@
 				};
 			};
 
-			sdc1_state_on: sdc1-state-on {
-				clk {
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc1_state_off: sdc1-state-off {
-				clk {
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc2_state_on: sdc2-clk-on {
-				clk {
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 			};
 
-			sdc2_state_off: sdc2-clk-off {
-				clk {
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
@@ -1995,10 +2028,6 @@
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
 			status = "disabled";
-
-			ufs_variant {
-				compatible = "qcom,ufs_variant";
-			};
 		};
 
 		ufsphy: phy@627000 {
@@ -2205,9 +2234,9 @@
 				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
 
-			clocks = <&mmcc GPU_AHB_CLK>,
-				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				 <&mmcc GPU_AHB_CLK>;
+			clock-names = "bus", "iface";
 
 			power-domains = <&mmcc GPU_GDSC>;
 		};
@@ -2272,9 +2301,9 @@
 				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
-			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
-				 <&mmcc SMMU_MDP_AXI_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>;
+			clock-names = "bus", "iface";
 
 			power-domains = <&mmcc MDSS_GDSC>;
 		};
@@ -2292,9 +2321,9 @@
 				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
-			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
-				 <&mmcc SMMU_VIDEO_AXI_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
+				 <&mmcc SMMU_VIDEO_AHB_CLK>;
+			clock-names = "bus", "iface";
 			#iommu-cells = <1>;
 			status = "okay";
 		};
@@ -2308,10 +2337,9 @@
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
-			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
-				 <&mmcc SMMU_VFE_AXI_CLK>;
-			clock-names = "iface",
-				      "bus";
+			clocks = <&mmcc SMMU_VFE_AXI_CLK>,
+				 <&mmcc SMMU_VFE_AHB_CLK>;
+			clock-names = "bus", "iface";
 			#iommu-cells = <1>;
 		};
 
@@ -2336,9 +2364,9 @@
 		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
 		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
 
-			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
-				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
-			clock-names = "iface", "bus";
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
+			clock-names = "bus", "iface";
 		};
 
 		slpi_pil: remoteproc@1c00000 {
@@ -3127,6 +3155,23 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c6: i2c@757a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x757a000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp2_dma: dma-controller@7584000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07584000 0x2b000>;
@@ -3309,27 +3354,25 @@
 			qcom,num-ees = <2>;
 		};
 
-		slim_msm: slim@91c0000 {
+		slim_msm: slim-ngd@91c0000 {
 			compatible = "qcom,slim-ngd-v1.5.0";
 			reg = <0x091c0000 0x2C000>;
-			reg-names = "ctrl";
 			interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&slimbam 3>, <&slimbam 4>,
-				<&slimbam 5>, <&slimbam 6>;
-			dma-names = "rx", "tx", "tx2", "rx2";
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			ngd@1 {
+			slim@1 {
 				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				#address-cells = <2>;
+				#size-cells = <0>;
 
-				tasha_ifd: tas-ifd {
+				tasha_ifd: tas-ifd@0,0 {
 					compatible = "slim217,1a0";
 					reg = <0 0>;
 				};
 
-				wcd9335: codec@1{
+				wcd9335: codec@1,0 {
 					pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
 					pinctrl-names = "default";
 
@@ -3342,7 +3385,7 @@
 					interrupt-names = "intr1", "intr2";
 					interrupt-controller;
 					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 
 					slim-ifc-dev = <&tasha_ifd>;
 
@@ -3393,12 +3436,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					q6core {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 					};
 
-					q6afe: q6afe {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						q6afedai: dais {
@@ -3406,13 +3449,13 @@
 							#address-cells = <1>;
 							#size-cells = <0>;
 							#sound-dai-cells = <1>;
-							hdmi@1 {
+							dai@1 {
 								reg = <1>;
 							};
 						};
 					};
 
-					q6asm: q6asm {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
@@ -3424,7 +3467,7 @@
 						};
 					};
 
-					q6adm: q6adm {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						q6routing: routing {
@@ -3504,7 +3547,7 @@
 		};
 
 		saw3: syscon@9a10000 {
-			compatible = "qcom,tcsr-msm8996", "syscon";
+			compatible = "syscon";
 			reg = <0x09a10000 0x1000>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
index ff4673ee9e81..d18d0b0eda95 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996pro.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include "pmi8996.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -12,7 +13,7 @@
 
 / {
 	model = "Xiaomi Mi 5s Plus";
-	compatible = "xiaomi,natrium", "qcom,msm8996";
+	compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
 	chassis-type = "handset";
 	qcom,msm-id = <305 0x10000>;
 	qcom,board-id = <47 0>;
@@ -164,7 +165,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l3a_0p875: l3 {
 			regulator-name = "vreg_l3a_0p875";
 			regulator-min-microvolt = <850000>;
@@ -398,14 +399,14 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchscreen_default: touchscreen-default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen-sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio89", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
index 79be5fb1295b..5e3b9130e9c2 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "msm8996pro.dtsi"
 #include "msm8996-xiaomi-common.dtsi"
 #include "pmi8996.dtsi"
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -13,7 +14,7 @@
 
 / {
 	model = "Xiaomi Mi Note 2";
-	compatible = "xiaomi,scorpio", "qcom,msm8996";
+	compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996";
 	chassis-type = "handset";
 	qcom,msm-id = <305 0x10000>;
 	qcom,board-id = <34 0>;
@@ -216,7 +217,7 @@
 };
 
 &rpm_requests {
-	pm8994-regulators {
+	regulators-0 {
 		vreg_l3a_0p875: l3 {
 			regulator-name = "vreg_l3a_0p875";
 			regulator-min-microvolt = <850000>;
@@ -468,28 +469,28 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
-	touchkey_default: touchkey_default {
+	touchkey_default: touchkey-default-state {
 		pins = "gpio77";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-pull-up;
 	};
 
-	touchkey_sleep: touchkey_sleep {
+	touchkey_sleep: touchkey-sleep-state {
 		pins = "gpio77";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	touchscreen_default: touchscreen_default {
+	touchscreen_default: touchscreen-default-state {
 		pins = "gpio75", "gpio125";
 		function = "gpio";
 		drive-strength = <10>;
 		bias-pull-up;
 	};
 
-	touchscreen_sleep: touchscreen_sleep {
+	touchscreen_sleep: touchscreen-sleep-state {
 		pins = "gpio75", "gpio125";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000000..a679a9c0cf99
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};
+
+&gpu_opp_table {
+	/*
+	 * Unlike CPU opp tables, the GPU driver does not shift speed bins.
+	 *
+	 * 652.8 Mhz is available on speed bin 0 only.
+	 * 624 Mhz and 560 Mhz are available on speed bins 0 and 1.
+	 * All the rest are available on all bins of the hardware (like on
+	 * plain 8996).
+	 */
+
+	opp-652800000 {
+		opp-hz = /bits/ 64 <652800000>;
+		opp-supported-hw = <0x01>;
+	};
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-supported-hw = <0x03>;
+	};
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-supported-hw = <0x03>;
+	};
+	/* The rest is inherited from msm8996 */
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 7928b8197474..3b7172aa4037 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -35,7 +35,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -46,7 +46,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -137,7 +137,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -357,8 +357,9 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	touchpad: touchpad-pin {
+	touchpad: touchpad-pin-state {
 		pins = "gpio123";
+		function = "gpio";
 		bias-pull-up;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 429ba57e20f7..310f7a2df1e8 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -216,7 +216,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -227,7 +227,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -310,15 +310,11 @@
 };
 
 &funnel4 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &funnel5 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &pcie0 {
@@ -390,7 +386,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -588,7 +584,7 @@
 
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -615,14 +611,14 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	gpio_kb_pins_extra: gpio-kb-pins-extra {
+	gpio_kb_pins_extra: gpio-kb-pins-extra-state {
 		pins = "gpio21", "gpio32", "gpio33", "gpio114",
 		       "gpio128", "gpio129";
 		function = "gpio";
@@ -630,21 +626,21 @@
 		bias-pull-up;
 	};
 
-	ts_vio_default: ts-vio-def {
+	ts_vio_default: ts-vio-def-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ts_rst_n: ts-rst-n {
+	ts_rst_n: ts-rst-n-state {
 		pins = "gpio89";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <8>;
 	};
 
-	hall_sensor1_default: hall-sensor1-def {
+	hall_sensor1_default: hall-sensor1-def-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,7 +648,7 @@
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index cf81c33a9d7e..a105143bee4a 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -28,8 +28,8 @@
 };
 
 &remoteproc_mss {
-	firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn",
-			"qcom/LENOVO/81F1/qcdsp28998.mbn";
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn";
 };
 
 &sdhc2 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index a3ca58100aee..453a1c9e9808 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -46,7 +46,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -57,7 +57,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -124,15 +124,11 @@
 };
 
 &funnel4 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &funnel5 {
-	// FIXME: Figure out why clock late_initcall crashes the board with
-	// this enabled.
-	// status = "okay";
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
 };
 
 &pcie0 {
@@ -168,7 +164,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -366,7 +362,7 @@
 
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index ef2a88a64d32..9fb1fb9b8529 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -22,7 +22,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_backlight_default>;
 
-		button-backlight {
+		led-keypad-backlight {
 			gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_KBD_BACKLIGHT;
@@ -33,11 +33,9 @@
 
 &pmi8998_gpio {
 	button_backlight_default: button-backlight-state {
-		pinconf {
-			pins = "gpio5";
-			function = "normal";
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		};
+		pins = "gpio5";
+		function = "gpio";
+		bias-pull-down;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 62bda23791bb..7d4a67d07501 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -233,7 +233,7 @@
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 46 (RX). This is needed to
@@ -244,7 +244,7 @@
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -279,6 +279,10 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 &qusb2phy {
 	status = "okay";
 
@@ -288,7 +292,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -477,7 +481,7 @@
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -492,7 +496,7 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	hall_sensor_default: hall-sensor-default {
+	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio124";
 		function = "gpio";
 		drive-strength = <2>;
@@ -500,28 +504,28 @@
 		input-enable;
 	};
 
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	ts_reset_active: ts-reset-active {
+	ts_reset_active: ts-reset-active-state {
 		pins = "gpio89";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	nfc_int_active: nfc-int-active {
+	nfc_int_active: nfc-int-active-state {
 		pins = "gpio92";
 		function = "gpio";
 		drive-strength = <6>;
 		bias-pull-up;
 	};
 
-	nfc_enable_active: nfc-enable-active {
+	nfc_enable_active: nfc-enable-active-state {
 		pins = "gpio12", "gpio116";
 		function = "gpio";
 		drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d08639082247..5da87baa2b23 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -375,7 +375,7 @@
 };
 
 &rpm_requests {
-	pm8998-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8998-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -410,135 +410,166 @@
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 		};
+
 		vreg_s4a_1p8: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-system-load = <100000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_s5a_2p04: s5 {
 			regulator-min-microvolt = <1904000>;
 			regulator-max-microvolt = <2032000>;
 		};
+
 		vreg_s7a_1p025: s7 {
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1028000>;
 		};
+
 		vreg_l1a_0p875: l1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-system-load = <73400>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l2a_1p2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-system-load = <12560>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l3a_1p0: l3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l5a_0p8: l5 {
 			regulator-min-microvolt = <800000>;
 			regulator-max-microvolt = <800000>;
 		};
+
 		vreg_l6a_1p8: l6 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l7a_1p8: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l8a_1p2: l8 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 		};
+
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l10a_1p8: l10 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 		};
+
 		vreg_l11a_1p0: l11 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
+
 		vreg_l12a_1p8: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l13a_2p95: l13 {
 			regulator-min-microvolt = <1808000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l14a_1p85: l14 {
 			regulator-min-microvolt = <1848000>;
 			regulator-max-microvolt = <1856000>;
 			regulator-system-load = <32000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		vreg_l16a_2p7: l16 {
 			regulator-min-microvolt = <2704000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
-		vreg_l18a_2p85: l18 {};
+
+		vreg_l18a_2p85: l18 { };
+
 		vreg_l19a_2p7: l19 {
 			regulator-min-microvolt = <2696000>;
 			regulator-max-microvolt = <2704000>;
 		};
+
 		vreg_l20a_2p95: l20 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-system-load = <10000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l21a_2p95: l21 {
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-system-load = <800000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l22a_2p85: l22 { };
+
 		vreg_l23a_3p3: l23 {
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l24a_3p075: l24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
 		};
+
 		vreg_l25a_3p3: l25 {
 			regulator-min-microvolt = <3104000>;
 			regulator-max-microvolt = <3312000>;
 		};
+
 		vreg_l26a_1p2: l26 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-allow-set-load;
 		};
+
 		vreg_l28_3p0: l28 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
 		vreg_lvs1a_1p8: lvs1 { };
+
 		vreg_lvs2a_1p8: lvs2 { };
 	};
 
-	pmi8998-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pmi8998-regulators";
 
 		vdd_bob-supply = <&vph_pwr>;
@@ -565,14 +596,14 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	nfc_ven: nfc-ven {
+	nfc_ven: nfc-ven-state {
 		pins = "gpio12";
 		function = "gpio";
 		bias-disable;
@@ -580,42 +611,42 @@
 		output-low;
 	};
 
-	msm_mclk0_default: msm-mclk0-active {
+	msm_mclk0_default: msm-mclk0-active-state {
 		pins = "gpio13";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	msm_mclk1_default: msm-mclk1-active {
+	msm_mclk1_default: msm-mclk1-active-state {
 		pins = "gpio14";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	cci0_default: cci0-default {
+	cci0_default: cci0-default-state {
 		pins = "gpio18", "gpio19";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cci1_default: cci1-default {
+	cci1_default: cci1-default-state {
 		pins = "gpio19", "gpio20";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cam0_vdig_default: cam0-vdig-default {
+	cam0_vdig_default: cam0-vdig-default-state {
 		pins = "gpio21";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	tof_int: tof-int {
+	tof_int: tof-int-state {
 		pins = "gpio22";
 		function = "gpio";
 		bias-pull-up;
@@ -623,28 +654,28 @@
 		input-enable;
 	};
 
-	cam1_vdig_default: cam1-vdig-default {
+	cam1_vdig_default: cam1-vdig-default-state {
 		pins = "gpio25";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	usb_extcon_active: usb-extcon-active {
+	usb_extcon_active: usb-extcon-active-state {
 		pins = "gpio38";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <16>;
 	};
 
-	tof_reset: tof-reset {
+	tof_reset: tof-reset-state {
 		pins = "gpio27";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	hall_sensor0_default: acc-cover-open {
+	hall_sensor0_default: acc-cover-open-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,14 +683,14 @@
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	usb_vbus_active: usb-vbus-active {
+	usb_vbus_active: usb-vbus-active-state {
 		pins = "gpio128";
 		function = "gpio";
 		bias-disable;
@@ -667,7 +698,7 @@
 		output-low;
 	};
 
-	ts_vddio_en: ts-vddio-en-default {
+	ts_vddio_en: ts-vddio-en-default-state {
 		pins = "gpio133";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
new file mode 100644
index 000000000000..b1aac7311ef9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com>
+ * Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete following upstream (msm8998.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Xiaomi Mi 6";
+	compatible = "xiaomi,sagit", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <30 0>;
+
+	reserved-memory {
+		/*
+		 * Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+		 * region by 4 MiB to account for this while relocating the other now
+		 * conflicting memory nodes accordingly.
+		 */
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d000000 {
+			reg = <0x0 0x8d000000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@94000000 {
+			reg = <0x0 0x94000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94500000 {
+			reg = <0x0 0x94500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94700000 {
+			reg = <0x0 0x94700000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95610000 {
+			reg = <0x0 0x95610000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95615000 {
+			reg = <0x0 0x95615000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95715000 {
+			reg = <0x0 0x95715000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the Xiaomi signed firmware expects them to be.
+		 */
+		ipa_fws_region: memory@f7800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7800000 0x0 0x5000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f7900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_key_default>;
+
+		key-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default_state>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	disp_vddts_vreg: disp-vddts-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "disp-vddts-regulator";
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c5 {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_active_state>;
+		pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>;
+
+		vdd-supply = <&disp_vddts_vreg>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <64>;
+			touchscreen-y-mm = <114>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <20>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+			syna,codes = <KEY_BACK KEY_APPSELECT>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	/delete-property/ bias-pull-up;
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	compatible = "qcom,pm8005-regulators";
+
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpio {
+	vol_up_key_default: vol-up-key-default-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	audio_mclk_pin: audio-mclk-pin-active-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&qusb2phy {
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	cci1_default_state: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cdc_reset_n_state: cdc-reset-n-state {
+		pins = "gpio64";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+		output-high;
+	};
+
+	hall_sensor_default_state: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	mdss_dsi_active_state: mdss-dsi-active-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend_state: mdss-dsi-suspend-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active_state: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend_state: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk0_active_state: msm-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk0_suspend_state: msm-mclk0-suspend-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk1_active_state: msm-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk1_suspend_state: msm-mclk1-suspend-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_int_active_state: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_int_suspend_state: nfc-int-suspend-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active_state: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_suspend_state: nfc-enable-suspend-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	ts_active_state: ts-active-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	ts_int_suspend_state: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_suspend_state: ts-reset-suspend-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_int_n_state: wcd-int-n-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+		input-enable;
+	};
+
+	wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+	status = "okay";
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&usb3 {
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f05f16ac5cc1..539382dab0ad 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -900,7 +900,7 @@
 		};
 
 		pcie0: pci@1c00000 {
-			compatible = "qcom,pcie-msm8996";
+			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg =	<0x01c00000 0x2000>,
 				<0x1b000000 0xf1d>,
 				<0x1b000f20 0xa8>,
@@ -929,11 +929,11 @@
 					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_AUX_CLK>;
-			clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux";
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
@@ -1056,81 +1056,82 @@
 			compatible = "qcom,msm8998-pinctrl";
 			reg = <0x03400000 0xc00000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 150>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			sdc2_on: sdc2-on {
-				clk {
+			sdc2_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
+			sdc2_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_cd: sdc2-cd {
+			sdc2_cd: sdc2-cd-state {
 				pins = "gpio95";
 				function = "gpio";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			blsp1_uart3_on: blsp1-uart3-on {
-				tx {
+			blsp1_uart3_on: blsp1-uart3-on-state {
+				tx-pins {
 					pins = "gpio45";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx {
+				rx-pins {
 					pins = "gpio46";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cts {
+				cts-pins {
 					pins = "gpio47";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rfr {
+				rfr-pins {
 					pins = "gpio48";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
@@ -1138,168 +1139,168 @@
 				};
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c5_default: blsp1-i2c5-default {
+			blsp1_i2c5_default: blsp1-i2c5-default-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c6_default: blsp1-i2c6-default {
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
-			blsp2_i2c1_default: blsp2-i2c1-default {
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c2_default: blsp2-i2c2-default {
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c3_default: blsp2-i2c3-default {
+			blsp2_i2c3_default: blsp2-i2c3-default-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c4_default: blsp2-i2c4-default {
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c5_default: blsp2-i2c5-default {
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6-default {
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
@@ -1903,7 +1904,7 @@
 
 			cpu = <&CPU4>;
 
-			port{
+			port {
 				etm4_out: endpoint {
 					remote-endpoint = <&apss_funnel_in4>;
 				};
@@ -1920,7 +1921,7 @@
 
 			cpu = <&CPU5>;
 
-			port{
+			port {
 				etm5_out: endpoint {
 					remote-endpoint = <&apss_funnel_in5>;
 				};
@@ -1937,7 +1938,7 @@
 
 			cpu = <&CPU6>;
 
-			port{
+			port {
 				etm6_out: endpoint {
 					remote-endpoint = <&apss_funnel_in6>;
 				};
@@ -1954,7 +1955,7 @@
 
 			cpu = <&CPU7>;
 
-			port{
+			port {
 				etm7_out: endpoint {
 					remote-endpoint = <&apss_funnel_in7>;
 				};
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
new file mode 100644
index 000000000000..1c8ccda26ffb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6125-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6125_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6125_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				linux,code = <KEY_POWER>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6125_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6125_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+			};
+
+			vcoin@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,pre-scaling = <1 3>;
+			};
+
+			xo-therm@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+			};
+		};
+
+		pm6125_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pm6125_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pm6125_gpio: gpio@c000 {
+			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6125_gpio 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 8a4972e6a24c..3d91fb405ca2 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/input/linux-event-codes.h>
@@ -86,7 +88,7 @@
 			status = "disabled";
 		};
 
-		pm6150_gpio: gpios@c000 {
+		pm6150_gpio: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index f02c223ef448..90aac61ad264 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -1,10 +1,43 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm6150l-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm6150l_lsid4: pmic@4 {
 		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
@@ -12,6 +45,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm6150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm6150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -55,7 +95,7 @@
 			status = "disabled";
 		};
 
-		pm6150l_gpio: gpios@c000 {
+		pm6150l_gpio: gpio@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
index ecf9b9919182..3a2a841e83f1 100644
--- a/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -3,8 +3,40 @@
  * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm6350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6350_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@0 {
 		compatible = "qcom,pm6350", "qcom,spmi-pmic";
@@ -35,7 +67,14 @@
 			};
 		};
 
-		pm6350_gpios: gpios@c000 {
+		pm6350_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6350_gpios: gpio@c000 {
 			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index e1622b16c08b..fc0eccaccdf6 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -163,14 +163,14 @@
 				qcom,pre-scaling = <1 3>;
 			};
 
-			vcoin: vcoin@83 {
+			vcoin: vcoin@85 {
 				reg = <ADC5_VCOIN>;
 				qcom,decimation = <1024>;
 				qcom,pre-scaling = <1 3>;
 			};
 		};
 
-		pm660_gpios: gpios@c000 {
+		pm660_gpios: gpio@c000 {
 			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index 8aa0a5078772..f9b3864bd3b9 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -48,7 +48,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm660l_gpios: gpios@c000 {
+		pm660l_gpios: gpio@c000 {
 			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
index e7f64a9ddc9c..d1c5476af5ee 100644
--- a/arch/arm64/boot/dts/qcom/pm7325.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
-// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
@@ -18,7 +20,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm7325_gpios: gpios@8800 {
+		pm7325_gpios: gpio@8800 {
 			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index 50fb6c753bf8..8d4b081b4e9d 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8005_gpio: gpios@c000 {
+		pm8005_gpio: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index cdded791d96e..66752cc063d6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -53,7 +53,7 @@
 			status = "disabled";
 		};
 
-		pm8150b_vbus: dcdc@1100 {
+		pm8150b_vbus: usb-vbus-regulator@1100 {
 			compatible = "qcom,pm8150b-vbus-reg";
 			status = "disabled";
 			reg = <0x1100>;
diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
new file mode 100644
index 000000000000..34fc72896761
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8450a: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450a_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450a_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450c: pmic@4 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450c_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450c_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450e: pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450e_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450e_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450g: pmic@c {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450g_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8450g_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 606c2a6d1f0f..08f9ca006e72 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -107,7 +107,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		pm8916_gpios: gpios@c000 {
+		pm8916_gpios: gpio@c000 {
 			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 000000000000..07c3896bd36f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			vcoin@5 {
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			die-temp@8 {
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-625mv@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-1250mv@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-buf-625mv@c {
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-gnd@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			ref-vdd@f {
+				reg = <VADC_VDD_VADC>;
+			};
+
+			pa-therm1@11 {
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			case-therm@13 {
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm@32 {
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			pa-therm0@36 {
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm-buf@3c {
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8950_gpio: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_gpio 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index e92e5ac414d3..672094c8ca58 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -108,7 +108,7 @@
 			};
 		};
 
-		pm8994_gpios: gpios@c000 {
+		pm8994_gpios: gpio@c000 {
 			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index d09f2954b6f9..6a5854333b2b 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -52,6 +52,14 @@
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm8998_temp: temp-alarm@2400 {
@@ -63,7 +71,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8998_coincell: coincell@2800 {
+		pm8998_coincell: charger@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 
@@ -101,7 +109,7 @@
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm8998_gpio: gpios@c000 {
+		pm8998_gpio: gpio@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
new file mode 100644
index 000000000000..32d27e2187e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "usbin";
+			};
+
+			adc-chan@1 {
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "dcin";
+			};
+
+			adc-chan@2 {
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vchg_sns";
+			};
+
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250v";
+			};
+
+			adc-chan@d {
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmi8950_mpps: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8950_gpio: gpio@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_gpio 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_wled: leds@d800 {
+			compatible = "qcom,pmi8950-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 542c215dde10..a0af91698d49 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -10,7 +10,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8994_gpios: gpios@c000 {
+		pmi8994_gpios: gpio@c000 {
 			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 3852a012bb0f..cd1caeae8281 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,7 +9,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8998_gpio: gpios@c000 {
+		pmi8998_gpio: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -18,6 +18,14 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8998_rradc: adc@4500 {
+			compatible = "qcom,pmi8998-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+
+			status = "disabled";
+		};
 	};
 
 	pmi8998_lsid1: pmic@3 {
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index a7ec9d11946d..32f5e6af8c11 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -8,27 +8,33 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8350_SID
+	#define PMK8350_SID 0
+#endif
+
 &spmi_bus {
-	pmk8350: pmic@0 {
+	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
+		reg = <PMK8350_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
 			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -38,14 +44,14 @@
 			reg = <0x3100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#io-channel-cells = <1>;
 		};
 
 		pmk8350_adc_tm: adc-tm@3400 {
 			compatible = "qcom,adc-tm7";
 			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -56,7 +62,7 @@
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
new file mode 100644
index 000000000000..ceb2e6358b3d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmp8074_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			ref-gnd@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-1p25@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vref-vadc@2 {
+				reg = <ADC5_VREF_VADC>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmic_die: die-temp@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			xo_therm: xo-temp@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm1: thermistor1@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm2: thermistor2@78 {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pa_therm3: thermistor3@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+			};
+		};
+
+		pmp8074_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			allow-set-time;
+			status = "disabled";
+		};
+
+		pmp8074_gpios: gpio@c000 {
+			compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmp8074_gpios 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		regulators {
+			compatible = "qcom,pmp8074-regulators";
+
+			s3: s3 {
+				regulator-name = "vdd_s3";
+				regulator-min-microvolt = <592000>;
+				regulator-max-microvolt = <1064000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			s4: s4 {
+				regulator-name = "vdd_s4";
+				regulator-min-microvolt = <712000>;
+				regulator-max-microvolt = <992000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			l11: l11 {
+				regulator-name = "l11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 634b0681d04c..ffe9e33808d0 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/input/linux-event-codes.h>
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
index 937eb4555ffe..fc29b194cd34 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 08d5d51221cf..59702ba24f35 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 /dts-v1/;
 
@@ -37,54 +39,54 @@
 };
 
 &tlmm {
-	ethernet_defaults: ethernet-defaults {
-		int {
+	ethernet_defaults: ethernet-defaults-state {
+		int-pins {
 			pins = "gpio61";
 			function = "rgmii_int";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		mdc {
+		mdc-pins {
 			pins = "gpio76";
 			function = "rgmii_mdc";
 			bias-pull-up;
 		};
-		mdio {
+		mdio-pins {
 			pins = "gpio75";
 			function = "rgmii_mdio";
 			bias-pull-up;
 		};
-		tx {
+		tx-pins {
 			pins = "gpio67", "gpio66", "gpio65", "gpio64";
 			function = "rgmii_tx";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx {
+		rx-pins {
 			pins = "gpio73", "gpio72", "gpio71", "gpio70";
 			function = "rgmii_rx";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		tx-ctl {
+		tx-ctl-pins {
 			pins = "gpio68";
 			function = "rgmii_ctl";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx-ctl {
+		rx-ctl-pins {
 			pins = "gpio74";
 			function = "rgmii_ctl";
 			bias-disable;
 			drive-strength = <2>;
 		};
-		tx-ck {
+		tx-ck-pins {
 			pins = "gpio63";
 			function = "rgmii_ck";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
-		rx-ck {
+		rx-ck-pins {
 			pins = "gpio69";
 			function = "rgmii_ck";
 			bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 1678ef0f8684..04c82d1624eb 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/gpio/gpio.h>
 #include "qcs404.dtsi"
@@ -125,7 +127,7 @@
 };
 
 &rpm_requests {
-	pms405-regulators {
+	regulators {
 		compatible = "qcom,rpm-pms405-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -229,7 +231,7 @@
 };
 
 &tlmm {
-	perst_state: perst {
+	perst_state: perst-state {
 		pins = "gpio43";
 		function = "gpio";
 
@@ -238,68 +240,63 @@
 		output-low;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	usb3_id_pin: usb3-id-pin {
-		pinmux {
-			pins = "gpio116";
-			function = "gpio";
-		};
+	usb3_id_pin: usb3-id-state {
+		pins = "gpio116";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio116";
-			drive-strength = <2>;
-			bias-pull-up;
-			input-enable;
-		};
+		drive-strength = <2>;
+		bias-pull-up;
+		input-enable;
 	};
 };
 
@@ -366,31 +363,28 @@
 /* PINCTRL - additions to nodes defined in qcs404.dtsi */
 
 &blsp1_uart2_default {
-	rx {
+	rx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	tx {
+	tx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 };
 
 &blsp1_uart3_default {
-	cts {
-		pins = "gpio84";
+	cts-pins {
 		bias-disable;
 	};
 
-	rts-tx {
-		pins = "gpio85", "gpio82";
+	rts-tx-pins {
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	rx {
-		pins = "gpio83";
+	rx-pins {
 		bias-pull-up;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 80f2d05595fa..a5324eecb50a 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, Linaro Limited
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qcs404.h>
@@ -593,118 +595,130 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_i2c0_default: blsp1-i2c0-default {
+			blsp1_i2c0_default: blsp1-i2c0-default-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c0";
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio24", "gpio25";
 				function = "blsp_i2c1";
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
-				sda {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				sda-pins {
 					pins = "gpio19";
 					function = "blsp_i2c_sda_a2";
 				};
 
-				scl {
+				scl-pins {
 					pins = "gpio20";
 					function = "blsp_i2c_scl_a2";
 				};
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio84", "gpio85";
 				function = "blsp_i2c3";
 			};
 
-			blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
 				pins = "gpio117", "gpio118";
 				function = "blsp_i2c4";
 			};
 
-			blsp1_uart0_default: blsp1-uart0-default {
+			blsp1_uart0_default: blsp1-uart0-default-state {
 				pins = "gpio30", "gpio31", "gpio32", "gpio33";
 				function = "blsp_uart0";
 			};
 
-			blsp1_uart1_default: blsp1-uart1-default {
+			blsp1_uart1_default: blsp1-uart1-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_uart1";
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
-				rx {
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
 					pins = "gpio18";
 					function = "blsp_uart_rx_a2";
 				};
 
-				tx {
+				tx-pins {
 					pins = "gpio17";
 					function = "blsp_uart_tx_a2";
 				};
 			};
 
-			blsp1_uart3_default: blsp1-uart3-default {
-				pins = "gpio82", "gpio83", "gpio84", "gpio85";
-				function = "blsp_uart3";
+			blsp1_uart3_default: blsp1-uart3-default-state {
+				cts-pins {
+					pins = "gpio84";
+					function = "blsp_uart3";
+				};
+
+				rts-tx-pins {
+					pins = "gpio85", "gpio82";
+					function = "blsp_uart3";
+				};
+
+				rx-pins {
+					pins = "gpio83";
+					function = "blsp_uart3";
+				};
 			};
 
-			blsp2_i2c0_default: blsp2-i2c0-default {
+			blsp2_i2c0_default: blsp2-i2c0-default-state {
 				pins = "gpio28", "gpio29";
 				function = "blsp_i2c5";
 			};
 
-			blsp1_spi0_default: blsp1-spi0-default {
+			blsp1_spi0_default: blsp1-spi0-default-state {
 				pins = "gpio30", "gpio31", "gpio32", "gpio33";
 				function = "blsp_spi0";
 			};
 
-			blsp1_spi1_default: blsp1-spi1-default {
-				mosi {
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				mosi-pins {
 					pins = "gpio22";
 					function = "blsp_spi_mosi_a1";
 				};
 
-				miso {
+				miso-pins {
 					pins = "gpio23";
 					function = "blsp_spi_miso_a1";
 				};
 
-				cs_n {
+				cs-n-pins {
 					pins = "gpio24";
 					function = "blsp_spi_cs_n_a1";
 				};
 
-				clk {
+				clk-pins {
 					pins = "gpio25";
 					function = "blsp_spi_clk_a1";
 				};
 			};
 
-			blsp1_spi2_default: blsp1-spi2-default {
+			blsp1_spi2_default: blsp1-spi2-default-state {
 				pins = "gpio17", "gpio18", "gpio19", "gpio20";
 				function = "blsp_spi2";
 			};
 
-			blsp1_spi3_default: blsp1-spi3-default {
+			blsp1_spi3_default: blsp1-spi3-default-state {
 				pins = "gpio82", "gpio83", "gpio84", "gpio85";
 				function = "blsp_spi3";
 			};
 
-			blsp1_spi4_default: blsp1-spi4-default {
+			blsp1_spi4_default: blsp1-spi4-default-state {
 				pins = "gpio37", "gpio38", "gpio117", "gpio118";
 				function = "blsp_spi4";
 			};
 
-			blsp2_spi0_default: blsp2-spi0-default {
+			blsp2_spi0_default: blsp2-spi0-default-state {
 				pins = "gpio26", "gpio27", "gpio28", "gpio29";
 				function = "blsp_spi5";
 			};
 
-			blsp2_uart0_default: blsp2-uart0-default {
+			blsp2_uart0_default: blsp2-uart0-default-state {
 				pins = "gpio26", "gpio27", "gpio28", "gpio29";
 				function = "blsp_uart5";
 			};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 000000000000..bb149e577914
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qrb5165-rb5.dts"
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@2 {
+			csiphy2_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l7f_1p8>;
+		avdd-supply = <&vdc_5v>;
+		dvdd-supply = <&vdc_5v>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index bf8077a1cf9a..8c64cb060e21 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -867,7 +867,7 @@
 };
 
 &q6afedai {
-	qi2s@16 {
+	dai@16 {
 		reg = <PRIMARY_MI2S_RX>;
 		qcom,sd-lines = <0 1 2 3>;
 	};
@@ -875,7 +875,7 @@
 
 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
 &q6afedai {
-	qi2s@20 {
+	dai@20 {
 		reg = <TERTIARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
@@ -904,7 +904,7 @@
 	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &sound {
@@ -1007,7 +1007,7 @@
 };
 
 &swr0 {
-	left_spkr: wsa8810-left{
+	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
 		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
@@ -1016,7 +1016,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	right_spkr: wsa8810-right{
+	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
 		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
@@ -1210,33 +1210,33 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
-	lt9611_irq_pin: lt9611-irq {
+	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 	};
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 87ab0e1ecd16..f41dcc379dce 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@
 
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-allow-set-load;
 
 		vin-supply = <&vreg_3p3>;
 	};
@@ -137,6 +136,8 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -152,6 +153,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -258,6 +261,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -273,6 +278,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -386,7 +393,7 @@
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &uart2 {
@@ -477,26 +484,26 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>;
 
-	sdc2_on: sdc2_on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;		/* No pull */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
 
-		sd-cd {
+		sd-cd-pins {
 			pins = "gpio96";
 			function = "gpio";
 			bias-pull-up;		/* pull up */
@@ -504,26 +511,26 @@
 		};
 	};
 
-	sdc2_off: sdc2_off {
-		clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;		/* No pull */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
 
-		sd-cd {
+		sd-cd-pins {
 			pins = "gpio96";
 			function = "gpio";
 			bias-pull-up;		/* pull up */
@@ -531,66 +538,62 @@
 		};
 	};
 
-	usb2phy_ac_en1_default: usb2phy_ac_en1_default {
-		mux {
-			pins = "gpio113";
-			function = "usb2phy_ac";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
+		pins = "gpio113";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	usb2phy_ac_en2_default: usb2phy_ac_en2_default {
-		mux {
-			pins = "gpio123";
-			function = "usb2phy_ac";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
+		pins = "gpio123";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	ethernet_defaults: ethernet-defaults {
-		mdc {
+	ethernet_defaults: ethernet-defaults-state {
+		mdc-pins {
 			pins = "gpio7";
 			function = "rgmii";
 			bias-pull-up;
 		};
 
-		mdio {
+		mdio-pins {
 			pins = "gpio59";
 			function = "rgmii";
 			bias-pull-up;
 		};
 
-		rgmii-rx {
+		rgmii-rx-pins {
 			pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
 			function = "rgmii";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		rgmii-tx {
+		rgmii-tx-pins {
 			pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
 			function = "rgmii";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		phy-intr {
+		phy-intr-pins {
 			pins = "gpio124";
 			function = "emac_phy";
 			bias-disable;
 			drive-strength = <8>;
 		};
 
-		pps {
+		pps-pins {
 			pins = "gpio81";
 			function = "emac_pps";
 			bias-disable;
 			drive-strength = <8>;
 		};
 
-		phy-reset {
+		phy-reset-pins {
 			pins = "gpio79";
 			function = "gpio";
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index b608b82dff03..84cb6f3eeb56 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -57,6 +57,13 @@
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	pmm8540-c-regulators {
@@ -83,6 +90,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c: ldo4 {
@@ -98,6 +107,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c: ldo7 {
@@ -113,6 +124,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17c: ldo17 {
@@ -121,6 +134,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
@@ -151,6 +166,76 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	num-lanes = <2>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3b {
+	perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3b_default>;
+
+	status = "okay";
+};
+
+&pcie3b_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
 &qup2 {
 	status = "okay";
 };
@@ -182,6 +267,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
 		pm8450a_gpios: gpio@c000 {
 			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
@@ -380,3 +473,97 @@
 };
 
 /* PINCTRL */
+
+&tlmm {
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3b_default: pcie3b-default-state {
+		clkreq-n-pins {
+			pins = "gpio152";
+			function = "pcie3b_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio153";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio130";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
new file mode 100644
index 000000000000..6c547f1b13dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8540p.dtsi"
+#include "pm8450a.dtsi"
+
+/ {
+	model = "Qualcomm SA8540P Ride";
+	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
+
+	aliases {
+		serial0 = &qup2_uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pcie3a {
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
+		 <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&qup2_uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	pcie3a_default: pcie3a-default-state {
+		perst-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vccq-supply = <&vreg_l6c>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 8ea2886fbab2..a88452c20d05 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -14,59 +14,81 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
 		};
 		opp-499200000 {
 			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
 		};
 		opp-595200000 {
 			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
 		};
 		opp-710400000 {
 			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <(672000 * 32)>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-902400000 {
 			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1017600000 {
 			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
 		};
 		opp-1209600000 {
 			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1286400 * 32)>;
 		};
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1382400 * 32)>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
 		};
 		opp-1670400000 {
 			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-1881600000 {
 			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2016000000 {
 			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2131200000 {
 			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2246400000 {
 			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 	};
 
@@ -76,58 +98,134 @@
 
 		opp-825600000 {
 			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(300000 * 32)>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1171200000 {
 			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1286400000 {
 			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1286400 * 32)>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
 		};
 		opp-1516800000 {
 			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1747200000 {
 			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1593600 * 32)>;
 		};
 		opp-1862400000 {
 			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-1977600000 {
 			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2169600000 {
 			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2284800000 {
 			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2380800000 {
 			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2496000000 {
 			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 		opp-2592000000 {
 			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
 		};
 	};
 };
 
+&pcie2a {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <0>;
+
+	interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie2b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <1>;
+
+	interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie3a {
+	compatible = "qcom,pcie-sa8540p";
+	reg = <0x0 0x01c10000 0x0 0x3000>,
+	      <0x0 0x40000000 0x0 0xf1d>,
+	      <0x0 0x40000f20 0x0 0xa8>,
+	      <0x0 0x40001000 0x0 0x1000>,
+	      <0x0 0x40100000 0x0 0x100000>;
+	reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>;
+
+	linux,pci-domain = <2>;
+
+	interrupts =  <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+
+	interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie3b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <3>;
+
+	interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie4 {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <4>;
+
+	interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
 &rpmhpd {
 	compatible = "qcom,sa8540p-rpmhpd";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 9dee131b1e24..70fd9ff8dfa2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -481,287 +481,261 @@
 };
 
 &qspi_clk {
-	pinconf {
-		pins = "gpio63";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_cs0 {
-	pinconf {
-		pins = "gpio68";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_data01 {
-	pinconf {
-		pins = "gpio64", "gpio65";
-
-		/* High-Z when no transfers; nice to park the lines */
-		bias-pull-up;
-	};
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
 };
 
 &qup_i2c2_default {
-	pinconf {
-		pins = "gpio15", "gpio16";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c4_default {
-	pinconf {
-		pins = "gpio115", "gpio116";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c7_default {
-	pinconf {
-		pins = "gpio6", "gpio7";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c9_default {
-	pinconf {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
-&qup_uart3_default {
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio38";
-		bias-pull-down;
-	};
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
 
-	pinconf-rts {
-		/* We'll drive RTS, so no pull */
-		pins = "gpio39";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-tx {
-		/* We'll drive TX, so no pull */
-		pins = "gpio40";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on RX. This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio41";
-		bias-pull-up;
-	};
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
 };
 
-&qup_uart8_default {
-	pinconf-tx {
-		pins = "gpio44";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		pins = "gpio45";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
-&qup_spi0_default {
-	pinconf {
-		pins = "gpio34", "gpio35", "gpio36", "gpio37";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_spi6_default {
-	pinconf {
-		pins = "gpio59", "gpio60", "gpio61", "gpio62";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi0_cs {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_spi10_default {
-	pinconf {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&tlmm {
-	qup_uart3_sleep: qup-uart3-sleep {
-		pinmux {
-			pins = "gpio38", "gpio39",
-			       "gpio40", "gpio41";
-			function = "gpio";
-		};
+&qup_spi6_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-		pinconf-cts {
+&tlmm {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
 			/*
 			 * Configure a pull-down on CTS to match the pull of
 			 * the Bluetooth module.
 			 */
 			pins = "gpio38";
+			function = "gpio";
 			bias-pull-down;
 		};
 
-		pinconf-rts {
+		rts-pins {
 			/*
 			 * Configure pull-down on RTS. As RTS is active low
 			 * signal, pull it low to indicate the BT SoC that it
 			 * can wakeup the system anytime from suspend state by
 			 * pulling RX low (by sending wakeup bytes).
 			 */
-			 pins = "gpio39";
-			 bias-pull-down;
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
 		};
 
-		pinconf-tx {
+		tx-pins {
 			/*
 			 * Configure pull-up on TX when it isn't actively driven
 			 * to prevent BT SoC from receiving garbage during sleep.
 			 */
 			pins = "gpio40";
+			function = "gpio";
 			bias-pull-up;
 		};
 
-		pinconf-rx {
+		rx-pins {
 			/*
 			 * Configure a pull-up on RX. This is needed to avoid
 			 * garbage data when the TX pin of the Bluetooth module
 			 * is floating which may cause spurious wakeups.
 			 */
 			pins = "gpio41";
+			function = "gpio";
 			bias-pull-up;
 		};
 	};
 
-	sdc1_on: sdc1-on {
-		pinconf-clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		pinconf-clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		pinconf-clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	sdc2_off: sdc2-off {
-		pinconf-clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 7ee407f7b6bb..8b8ea8af165d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -181,23 +181,15 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux  {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 &ts_reset_l {
-	pinconf {
-		/*
-		 * We want reset state by default and it will be up to the
-		 * driver to disable this when it's ready.
-		 */
-		output-low;
-	};
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -327,16 +319,10 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	dmic_clk_en: dmic_clk_en {
-		pinmux {
-			pins = "gpio83";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio83";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
+	dmic_clk_en: dmic-clk-en-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9e9..d3cf64c16dcd 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -10,22 +10,22 @@
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
 
-	max98360a_1: max98360a_1 {
+	max98360a_1: amplifier-1 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	max98360a_2: max98360a_2 {
+	max98360a_2: amplifier-2 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	max98360a_3: max98360a_3 {
+	max98360a_3: amplifier-3 {
 		compatible = "maxim,max98360a";
 		#sound-dai-cells = <0>;
 	};
 
-	pp3300_touch: pp3300-touch {
+	pp3300_touch: pp3300-touch-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_touch";
 
@@ -180,30 +180,19 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
-&sec_mi2s_active{
-	pinmux {
-		pins = "gpio49", "gpio50", "gpio51", "gpio52";
-		function = "mi2s_1";
-	};
+&sec_mi2s_active {
+	pins = "gpio49", "gpio50", "gpio51", "gpio52";
 };
 
 &ts_reset_l {
-	pinconf {
-		/*
-		 * We want reset state by default and it will be up to the
-		 * driver to disable this when it's ready.
-		 */
-		output-low;
-	};
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -333,16 +322,10 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	en_pp3300_touch: en-pp3300-touch {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_touch: en-pp3300-touch-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
index 1a62e8d435ab..3abd6222fe46 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
@@ -29,16 +29,10 @@
 };
 
 &tlmm {
-	en_fp_rails: en-fp-rails {
-		pinmux {
-			pins = "gpio74";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio74";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_fp_rails: en-fp-rails-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
index 74f0e07ea5cf..315ac5eb5f78 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
@@ -11,6 +11,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
@@ -87,13 +88,7 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 002663d752da..269007d73162 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -75,21 +75,13 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
-	pinmux {
-		pins = "gpio58";
-	};
-
-	pinconf {
-		pins = "gpio58";
-	};
+	pins = "gpio58";
 };
 
 &ts_reset_l {
-	pinconf {
-		/* This pin is not connected on -rev0, pull up to park. */
-		/delete-property/bias-disable;
-		bias-pull-up;
-	};
+	/* This pin is not connected on -rev0, pull up to park. */
+	/delete-property/bias-disable;
+	bias-pull-up;
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
index 7bc8402c018e..f4c1f3813664 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
@@ -24,30 +24,13 @@
 
 /* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
 &avdd_lcd_en {
-	pinmux {
-		pins = "gpio80";
-	};
-
-	pinconf {
-		pins = "gpio80";
-	};
+	pins = "gpio80";
 };
 
 &mipi_1800_en {
-	pinmux {
-		pins = "gpio81";
-	};
-
-	pinconf {
-		pins = "gpio81";
-	};
+	pins = "gpio81";
 };
-&vdd_reset_1800 {
-	pinmux {
-		pins = "gpio76";
-	};
 
-	pinconf {
-		pins = "gpio76";
-	};
+&vdd_reset_1800 {
+	pins = "gpio76";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
index 97cba7f8064f..ed12ee35f06b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
@@ -13,7 +13,7 @@
 /delete-node/ &usb_c1;
 
 / {
-	avdd_lcd: avdd-lcd {
+	avdd_lcd: avdd-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_lcd";
 
@@ -25,7 +25,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	avee_lcd: avee-lcd {
+	avee_lcd: avee-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avee_lcd";
 
@@ -37,7 +37,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	v1p8_mipi: v1p8-mipi {
+	v1p8_mipi: v1p8-mipi-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_mipi";
 
@@ -160,13 +160,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio85";
-	};
-
-	pinconf {
-		pins = "gpio85";
-	};
+	pins = "gpio85";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -296,55 +290,31 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	avdd_lcd_en: avdd-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	avee_lcd_en: avee-lcd-en {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	mipi_1800_en: mipi-1800-en {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	vdd_reset_1800: vdd-reset-1800 {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
index 6a84fba178d6..ebd6765e2afa 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	pp3300_brij_ps8640: pp3300-brij-ps8640 {
+	pp3300_brij_ps8640: pp3300-brij-ps8640-regulator {
 		compatible = "regulator-fixed";
 		status = "okay";
 		regulator-name = "pp3300_brij_ps8640";
@@ -83,29 +83,17 @@ edp_brij_i2c: &i2c2 {
 };
 
 &tlmm {
-	edp_brij_ps8640_rst: edp-brij-ps8640-rst {
-		pinmux {
-			pins = "gpio11";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio11";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	edp_brij_ps8640_rst: edp-brij-ps8640-rst-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 {
-		pinmux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
index 56d787785fd5..d06cc4ea3375 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -84,13 +84,7 @@
 };
 
 &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
new file mode 100644
index 000000000000..021bcafcf815
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
new file mode 100644
index 000000000000..defd84c5354a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,WIFI-only)";
+	compatible = "google,pazquel-sku21", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
new file mode 100644
index 000000000000..5702325d0c7b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include "sc7180-trogdor-pazquel.dtsi"
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+		MATRIX_KEY(0x03, 0x09, 0)       /* T11 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		MATRIX_KEY(0x03, 0x09, KEY_SLEEP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index a7582fb547ee..6c5287bd27d6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -312,15 +312,9 @@ ap_ts_pen_1v8: &i2c4 {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	dmic_sel: dmic-sel {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			bias-pull-down;
-		};
+	dmic_sel: dmic-sel-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 695b04fe7221..cb41ccdaccfd 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -13,7 +13,7 @@
 /delete-node/ &usb_c1;
 
 / {
-	ppvar_lcd: ppvar-lcd {
+	ppvar_lcd: ppvar-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_lcd";
 
@@ -25,7 +25,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	v1p8_disp: v1p8-disp {
+	v1p8_disp: v1p8-disp-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_disp";
 
@@ -147,13 +147,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio67";
-	};
-
-	pinconf {
-		pins = "gpio67";
-	};
+	pins = "gpio67";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -283,42 +277,24 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	lcd_rst: lcd-rst {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	lcd_rst: lcd-rst-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	ppvar_lcd_en: ppvar-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	ppvar_lcd_en: ppvar-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pp1800_disp_on: pp1800-disp-on {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pp1800_disp_on: pp1800-disp-on-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index bc097d1b1b23..671b3691f1bb 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -63,13 +63,7 @@ ap_ts_pen_1v8: &i2c4 {
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
-	pinmux {
-		pins = "gpio58";
-	};
-
-	pinconf {
-		pins = "gpio58";
-	};
+	pins = "gpio58";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index f869e6a343c1..65333709e529 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -76,16 +76,10 @@ edp_brij_i2c: &i2c2 {
 };
 
 &tlmm {
-	edp_brij_irq: edp-brij-irq {
-		pinmux {
-			pins = "gpio11";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio11";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
index db29e0cba29d..7f272c6e95f6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
@@ -24,30 +24,13 @@
 
 /* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
 &avdd_lcd_en {
-	pinmux {
-		pins = "gpio80";
-	};
-
-	pinconf {
-		pins = "gpio80";
-	};
+	pins = "gpio80";
 };
 
 &mipi_1800_en {
-	pinmux {
-		pins = "gpio81";
-	};
-
-	pinconf {
-		pins = "gpio81";
-	};
+	pins = "gpio81";
 };
-&vdd_reset_1800 {
-	pinmux {
-		pins = "gpio76";
-	};
 
-	pinconf {
-		pins = "gpio76";
-	};
+&vdd_reset_1800 {
+	pins = "gpio76";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
index aa605885c371..6225ab8329c3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -19,6 +19,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
index 7116c44c8d85..b40b068dad6a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -19,6 +19,7 @@
 
 &alc5682 {
 	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 6312108e8b3e..9832e752da35 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -10,7 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 
 / {
-	avdd_lcd: avdd-lcd {
+	avdd_lcd: avdd-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_lcd";
 
@@ -22,7 +22,7 @@
 		vin-supply = <&pp5000_a>;
 	};
 
-	avee_lcd: avee-lcd {
+	avee_lcd: avee-lcd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "avee_lcd";
 
@@ -35,7 +35,7 @@
 	};
 
 	pp1800_ts:
-	v1p8_mipi: v1p8-mipi {
+	v1p8_mipi: v1p8-mipi-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "v1p8_mipi";
 
@@ -222,13 +222,7 @@ pp3300_disp_on: &pp3300_dx_edp {
  */
 
 tp_en: &en_pp3300_dx_edp {
-	pinmux {
-		pins = "gpio85";
-	};
-
-	pinconf {
-		pins = "gpio85";
-	};
+	pins = "gpio85";
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -358,55 +352,31 @@ tp_en: &en_pp3300_dx_edp {
 			  "DP_HOT_PLUG_DET",
 			  "EC_IN_RW_ODL";
 
-	avdd_lcd_en: avdd-lcd-en {
-		pinmux {
-			pins = "gpio88";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio88";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	avee_lcd_en: avee-lcd-en {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	mipi_1800_en: mipi-1800-en {
-		pinmux {
-			pins = "gpio86";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio86";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	vdd_reset_1800: vdd-reset-1800 {
-		pinmux {
-			pins = "gpio87";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio87";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index eae22e6e97c1..f1defb94d670 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -354,7 +354,7 @@
 
 	pwmleds {
 		compatible = "pwm-leds";
-		keyboard_backlight: keyboard-backlight {
+		keyboard_backlight: led-0 {
 			status = "disabled";
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
@@ -768,6 +768,8 @@ hp_i2c: &i2c9 {
 		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
 
 		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
 		MICVDD-supply = <&pp3300_codec>;
 		VBAT-supply = <&pp3300_audio>;
 
@@ -880,27 +882,30 @@ hp_i2c: &i2c9 {
 };
 
 &spi0 {
-	pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
+	pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>;
 	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 };
 
 &spi6 {
-	pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
+	pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>;
 	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 };
 
 ap_spi_fp: &spi10 {
-	pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+	pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>;
 	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
-		compatible = "google,cros-ec-spi";
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fp_to_ap_irq_l>;
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_tp>;
 	};
 };
 
@@ -997,175 +1002,141 @@ ap_spi_fp: &spi10 {
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &dp_hot_plug_det {
-	pinconf {
-		pins = "gpio117";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &pri_mi2s_active {
-	pinconf {
-		pins = "gpio53", "gpio54", "gpio55", "gpio56";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 &pri_mi2s_mclk_active {
-	pinconf {
-		pins = "gpio57";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 &qspi_cs0 {
-	pinconf {
-		pins = "gpio68";
-		bias-disable;
-	};
+	bias-disable;
 };
 
 &qspi_clk {
-	pinconf {
-		pins = "gpio63";
-		drive-strength = <8>;
-		bias-disable;
-	};
+	drive-strength = <8>;
+	bias-disable;
 };
 
 &qspi_data01 {
-	pinconf {
-		pins = "gpio64", "gpio65";
-
-		/* High-Z when no transfers; nice to park the lines */
-		bias-pull-up;
-	};
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
 };
 
 &qup_i2c2_default {
-	pinconf {
-		pins = "gpio15", "gpio16";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c4_default {
-	pinconf {
-		pins = "gpio115", "gpio116";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c5_default {
-	pinconf {
-		pins = "gpio25", "gpio26";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c7_default {
-	pinconf {
-		pins = "gpio6", "gpio7";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
 };
 
 &qup_i2c9_default {
-	pinconf {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
+	drive-strength = <2>;
 
-		/* Has external pullup */
-		bias-disable;
-	};
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi0_cs_gpio {
-	pinconf {
-		pins = "gpio34", "gpio35", "gpio36", "gpio37";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi6_cs_gpio {
-	pinconf {
-		pins = "gpio59", "gpio60", "gpio61", "gpio62";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &qup_spi10_cs_gpio {
-	pinconf {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_uart3_default {
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio38";
-		bias-pull-down;
-	};
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
 
-	pinconf-rts-tx {
-		/* We'll drive RTS and TX, so no pull */
-		pins = "gpio39", "gpio40";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on RX. This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio41";
-		bias-pull-up;
-	};
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
 };
 
-&qup_uart8_default {
-	pinconf-tx {
-		pins = "gpio44";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
 
-	pinconf-rx {
-		pins = "gpio45";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
 &sec_mi2s_active {
-	pinconf {
-		pins = "gpio49", "gpio50", "gpio51";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
+	drive-strength = <2>;
+	bias-pull-down;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -1196,468 +1167,337 @@ ap_spi_fp: &spi10 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
 
-	amp_en: amp-en {
-		pinmux {
-			pins = "gpio23";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio23";
-			bias-pull-down;
-		};
+	amp_en: amp-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-pull-down;
 	};
 
-	ap_ec_int_l: ap-ec-int-l {
-		pinmux {
-			pins = "gpio94";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio94";
-			bias-pull-up;
-		};
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio94";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
 	};
 
-	ap_edp_bklten: ap-edp-bklten {
-		pinmux {
-			pins = "gpio12";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 
-			/* Force backlight to be disabled to match state at boot. */
-			output-low;
-		};
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
 	};
 
-	ap_suspend_l_neuter: ap-suspend-l-neuter {
-		pinmux  {
-			pins = "gpio27";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio27";
-			bias-disable;
-		};
+	ap_suspend_l_neuter: ap-suspend-l-neuter-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
 	};
 
-	bios_flash_wp_l: bios-flash-wp-l {
-		pinmux {
-			pins = "gpio66";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio66";
-			bias-disable;
-		};
+	bios_flash_wp_l: bios-flash-wp-l-state {
+		pins = "gpio66";
+		function = "gpio";
+		input-enable;
+		bias-disable;
 	};
 
-	edp_brij_en: edp-brij-en {
-		pinmux {
-			pins = "gpio104";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio104";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio104";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_codec: en-pp3300-codec {
-		pinmux {
-			pins = "gpio83";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio83";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_dx_edp: en-pp3300-dx-edp {
-		pinmux {
-			pins = "gpio30";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio30";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	en_pp3300_hub: en-pp3300-hub {
-		pinmux {
-			pins = "gpio84";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio84";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	en_pp3300_hub: en-pp3300-hub-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	fp_to_ap_irq_l: fp-to-ap-irq-l {
-		pinmux {
-			pins = "gpio4";
-			function = "gpio";
-			input-enable;
-		};
-
-		pinconf {
-			pins = "gpio4";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl {
-		pinmux {
-			pins = "gpio42";
-			function = "gpio";
-			input-enable;
-		};
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio4";
+		function = "gpio";
+		input-enable;
 
-		pinconf {
-			pins = "gpio42";
-			bias-pull-up;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	hp_irq: hp-irq {
-		pinmux {
-			pins = "gpio28";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio28";
-			bias-pull-up;
-		};
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio10";
+		function = "gpio";
+		bias-disable;
 	};
 
-	pen_irq_l: pen-irq-l {
-		pinmux {
-			pins = "gpio21";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio21";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio42";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
 	};
 
-	pen_pdct_l: pen-pdct-l {
-		pinmux {
-			pins = "gpio52";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio52";
-
-			/* Has external pullup */
-			bias-disable;
-		};
+	hp_irq: hp-irq-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
 	};
 
-	pen_rst_odl: pen-rst-odl {
-		pinmux  {
-			pins = "gpio18";
-			function = "gpio";
-		};
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio21";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio18";
-			bias-disable;
-			drive-strength = <2>;
-
-			/*
-			 * The pen driver doesn't currently support
-			 * driving this reset line.  By specifying
-			 * output-high here we're relying on the fact
-			 * that this pin has a default pulldown at boot
-			 * (which makes sure the pen was in reset if it
-			 * was powered) and then we set it high here to
-			 * take it out of reset.  Better would be if the
-			 * pen driver could control this and we could
-			 * remove "output-high" here.
-			 */
-			output-high; /* TODO: Remove this? */
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	p_sensor_int_l: p-sensor-int-l {
-		pinmux {
-			pins = "gpio24";
-			function = "gpio";
-			input-enable;
-		};
+	pen_pdct_l: pen-pdct-l-state-state {
+		pins = "gpio52";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio24";
-			/* Has external pullup */
-			bias-disable;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio37";
-			output-high;
-		};
-	};
+	pen_rst_odl: pen-rst-odl-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 
-	qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio62";
-			output-high;
-		};
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high; /* TODO: Remove this? */
 	};
 
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
-		pinconf {
-			pins = "gpio89";
-			output-high;
-		};
-	};
+	p_sensor_int_l: p-sensor-int-l-state {
+		pins = "gpio24";
+		function = "gpio";
+		input-enable;
 
-	qup_uart3_sleep: qup-uart3-sleep {
-		pinmux {
-			pins = "gpio38", "gpio39",
-			       "gpio40", "gpio41";
-			function = "gpio";
-		};
+		/* Has external pullup */
+		bias-disable;
+	};
 
-		pinconf-cts {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
 			/*
 			 * Configure a pull-down on CTS to match the pull of
 			 * the Bluetooth module.
 			 */
 			pins = "gpio38";
+			function = "gpio";
 			bias-pull-down;
 		};
 
-		pinconf-rts {
+		rts-pins {
 			/*
 			 * Configure pull-down on RTS. As RTS is active low
 			 * signal, pull it low to indicate the BT SoC that it
 			 * can wakeup the system anytime from suspend state by
 			 * pulling RX low (by sending wakeup bytes).
 			 */
-			 pins = "gpio39";
-			 bias-pull-down;
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
 		};
 
-		pinconf-tx {
+		tx-pins {
 			/*
 			 * Configure pull-up on TX when it isn't actively driven
 			 * to prevent BT SoC from receiving garbage during sleep.
 			 */
 			pins = "gpio40";
+			function = "gpio";
 			bias-pull-up;
 		};
 
-		pinconf-rx {
+		rx-pins {
 			/*
 			 * Configure a pull-up on RX. This is needed to avoid
 			 * garbage data when the TX pin of the Bluetooth module
 			 * is floating which may cause spurious wakeups.
 			 */
 			pins = "gpio41";
+			function = "gpio";
 			bias-pull-up;
 		};
 	};
 
 	/* Named trackpad_int_1v8_odl on earlier revision schematics */
 	trackpad_int_1v8_odl:
-	tp_int_odl: tp-int-odl {
-		pinmux {
-			pins = "gpio0";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio0";
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio0";
+		function = "gpio";
 
-			/* Has external pullup */
-			bias-disable;
-		};
+		/* Has external pullup */
+		bias-disable;
 	};
 
-	ts_int_l: ts-int-l {
-		pinmux  {
-			pins = "gpio9";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio9";
-			bias-pull-up;
-		};
+	ts_int_l: ts-int-l-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-pull-up;
 	};
 
-	ts_reset_l: ts-reset-l {
-		pinmux  {
-			pins = "gpio8";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio8";
-			bias-disable;
-			drive-strength = <2>;
-		};
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
 	};
 
-	sdc1_on: sdc1-on {
-		pinconf-clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <16>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc1_off: sdc1-off {
-		pinconf-clk {
+	sdc1_off: sdc1-off-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc1_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-rclk {
+		rclk-pins {
 			pins = "sdc1_rclk";
 			bias-pull-down;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		pinconf-clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	sdc2_off: sdc2-off {
-		pinconf-clk {
+	sdc2_off: sdc2-off-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <2>;
 		};
 
-		pinconf-cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf-sd-cd {
+		sd-cd-pins {
 			pins = "gpio69";
+			function = "gpio";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
 
-	uf_cam_en: uf-cam-en {
-		pinmux {
-			pins = "gpio6";
-			function = "gpio";
-		};
+	uf_cam_en: uf-cam-en-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
 
-		pinconf {
-			pins = "gpio6";
-			drive-strength = <2>;
-			/* External pull down */
-			bias-disable;
-		};
+		/* External pull down */
+		bias-disable;
 	};
 
-	wf_cam_en: wf-cam-en {
-		pinmux {
-			pins = "gpio7";
-			function = "gpio";
-		};
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
 
-		pinconf {
-			pins = "gpio7";
-			drive-strength = <2>;
-			/* External pull down */
-			bias-disable;
-		};
+		/* External pull down */
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 58976a1ba06b..f71cf21a8dd8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -662,6 +662,7 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7180_CX>;
 		};
 
 		qfprom: efuse@784000 {
@@ -795,7 +796,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -849,7 +850,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -939,7 +940,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1029,7 +1030,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1096,7 +1097,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi6_default>;
+				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1186,7 +1187,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1276,7 +1277,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi10_default>;
+				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1330,7 +1331,7 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi11_default>;
+				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1486,410 +1487,443 @@
 			gpio-ranges = <&tlmm 0 0 120>;
 			wakeup-parent = <&pdc>;
 
-			dp_hot_plug_det: dp-hot-plug-det {
-				pinmux {
-					pins = "gpio117";
-					function = "dp_hot";
-				};
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio117";
+				function = "dp_hot";
 			};
 
-			qspi_clk: qspi-clk {
-				pinmux {
-					pins = "gpio63";
-					function = "qspi_clk";
-				};
+			qspi_clk: qspi-clk-state {
+				pins = "gpio63";
+				function = "qspi_clk";
 			};
 
-			qspi_cs0: qspi-cs0 {
-				pinmux {
-					pins = "gpio68";
-					function = "qspi_cs";
-				};
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio68";
+				function = "qspi_cs";
 			};
 
-			qspi_cs1: qspi-cs1 {
-				pinmux {
-					pins = "gpio72";
-					function = "qspi_cs";
-				};
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio72";
+				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01 {
-				pinmux-data {
-					pins = "gpio64", "gpio65";
-					function = "qspi_data";
-				};
+			qspi_data01: qspi-data01-state {
+				pins = "gpio64", "gpio65";
+				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12 {
-				pinmux-data {
-					pins = "gpio66", "gpio67";
-					function = "qspi_data";
-				};
+			qspi_data12: qspi-data12-state {
+				pins = "gpio66", "gpio67";
+				function = "qspi_data";
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
-				pinmux {
-					pins = "gpio34", "gpio35";
-					function = "qup00";
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup00";
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				pinmux {
-					pins = "gpio0", "gpio1";
-					function = "qup01";
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup01";
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				pinmux {
-					pins = "gpio15", "gpio16";
-					function = "qup02_i2c";
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio15", "gpio16";
+				function = "qup02_i2c";
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				pinmux {
-					pins = "gpio38", "gpio39";
-					function = "qup03";
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio38", "gpio39";
+				function = "qup03";
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				pinmux {
-					pins = "gpio115", "gpio116";
-					function = "qup04_i2c";
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup04_i2c";
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				pinmux {
-					pins = "gpio25", "gpio26";
-					function = "qup05";
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup05";
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				pinmux {
-					pins = "gpio59", "gpio60";
-					function = "qup10";
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio59", "gpio60";
+				function = "qup10";
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				pinmux {
-					pins = "gpio6", "gpio7";
-					function = "qup11_i2c";
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup11_i2c";
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				pinmux {
-					pins = "gpio42", "gpio43";
-					function = "qup12";
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio42", "gpio43";
+				function = "qup12";
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				pinmux {
-					pins = "gpio46", "gpio47";
-					function = "qup13_i2c";
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio46", "gpio47";
+				function = "qup13_i2c";
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				pinmux {
-					pins = "gpio86", "gpio87";
-					function = "qup14";
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio86", "gpio87";
+				function = "qup14";
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				pinmux {
-					pins = "gpio53", "gpio54";
-					function = "qup15";
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi0_spi: qup-spi0-spi-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio37";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio37";
+				function = "gpio";
+			};
+
+			qup_spi1_spi: qup-spi1-spi-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio3";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi3_spi: qup-spi3-spi-state {
+				pins = "gpio38", "gpio39", "gpio40";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio41";
+				function = "qup03";
 			};
 
-			qup_spi0_default: qup-spi0-default {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36", "gpio37";
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio41";
+				function = "gpio";
+			};
+
+			qup_spi5_spi: qup-spi5-spi-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio28";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi6_spi: qup-spi6-spi-state {
+				pins = "gpio59", "gpio60", "gpio61";
+				function = "qup10";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio62";
+				function = "qup10";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			qup_spi8_spi: qup-spi8-spi-state {
+				pins = "gpio42", "gpio43", "gpio44";
+				function = "qup12";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio45";
+				function = "qup12";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio45";
+				function = "gpio";
+			};
+
+			qup_spi10_spi: qup-spi10-spi-state {
+				pins = "gpio86", "gpio87", "gpio88";
+				function = "qup14";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio89";
+				function = "qup14";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio89";
+				function = "gpio";
+			};
+
+			qup_spi11_spi: qup-spi11-spi-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio56";
+				function = "qup15";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio56";
+				function = "gpio";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_cts: cts-pins {
+					pins = "gpio34";
 					function = "qup00";
 				};
-			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36";
+				qup_uart0_rts: rts-pins {
+					pins = "gpio35";
 					function = "qup00";
 				};
 
-				pinmux-cs {
+				qup_uart0_tx: tx-pins {
+					pins = "gpio36";
+					function = "qup00";
+				};
+
+				qup_uart0_rx: rx-pins {
 					pins = "gpio37";
-					function = "gpio";
+					function = "qup00";
 				};
 			};
 
-			qup_spi1_default: qup-spi1-default {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2", "gpio3";
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_cts: cts-pins {
+					pins = "gpio0";
 					function = "qup01";
 				};
-			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2";
+				qup_uart1_rts: rts-pins {
+					pins = "gpio1";
 					function = "qup01";
 				};
 
-				pinmux-cs {
-					pins = "gpio3";
-					function = "gpio";
+				qup_uart1_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup01";
 				};
-			};
 
-			qup_spi3_default: qup-spi3-default {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40", "gpio41";
-					function = "qup03";
+				qup_uart1_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup01";
 				};
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40";
-					function = "qup03";
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio15";
+					function = "qup02_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio41";
-					function = "gpio";
+				qup_uart2_rx: rx-pins {
+					pins = "gpio16";
+					function = "qup02_uart";
 				};
 			};
 
-			qup_spi5_default: qup-spi5-default {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27", "gpio28";
-					function = "qup05";
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_cts: cts-pins {
+					pins = "gpio38";
+					function = "qup03";
 				};
-			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27";
-					function = "qup05";
+				qup_uart3_rts: rts-pins {
+					pins = "gpio39";
+					function = "qup03";
 				};
 
-				pinmux-cs {
-					pins = "gpio28";
-					function = "gpio";
+				qup_uart3_tx: tx-pins {
+					pins = "gpio40";
+					function = "qup03";
 				};
-			};
 
-			qup_spi6_default: qup-spi6-default {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61", "gpio62";
-					function = "qup10";
+				qup_uart3_rx: rx-pins {
+					pins = "gpio41";
+					function = "qup03";
 				};
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61";
-					function = "qup10";
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio115";
+					function = "qup04_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio62";
-					function = "gpio";
+				qup_uart4_rx: rx-pins {
+					pins = "gpio116";
+					function = "qup04_uart";
 				};
 			};
 
-			qup_spi8_default: qup-spi8-default {
-				pinmux {
-					pins = "gpio42", "gpio43",
-					       "gpio44", "gpio45";
-					function = "qup12";
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_cts: cts-pins {
+					pins = "gpio25";
+					function = "qup05";
 				};
-			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
-				pinmux {
-					pins = "gpio42", "gpio43",
-					       "gpio44";
-					function = "qup12";
+				qup_uart5_rts: rts-pins {
+					pins = "gpio26";
+					function = "qup05";
 				};
 
-				pinmux-cs {
-					pins = "gpio45";
-					function = "gpio";
+				qup_uart5_tx: tx-pins {
+					pins = "gpio27";
+					function = "qup05";
 				};
-			};
 
-			qup_spi10_default: qup-spi10-default {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88", "gpio89";
-					function = "qup14";
+				qup_uart5_rx: rx-pins {
+					pins = "gpio28";
+					function = "qup05";
 				};
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88";
-					function = "qup14";
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_cts: cts-pins {
+					pins = "gpio59";
+					function = "qup10";
 				};
 
-				pinmux-cs {
-					pins = "gpio89";
-					function = "gpio";
+				qup_uart6_rts: rts-pins {
+					pins = "gpio60";
+					function = "qup10";
 				};
-			};
 
-			qup_spi11_default: qup-spi11-default {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55", "gpio56";
-					function = "qup15";
+				qup_uart6_tx: tx-pins {
+					pins = "gpio61";
+					function = "qup10";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio62";
+					function = "qup10";
 				};
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55";
-					function = "qup15";
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio6";
+					function = "qup11_uart";
 				};
 
-				pinmux-cs {
-					pins = "gpio56";
-					function = "gpio";
+				qup_uart7_rx: rx-pins {
+					pins = "gpio7";
+					function = "qup11_uart";
 				};
 			};
 
-			qup_uart0_default: qup-uart0-default {
-				pinmux {
-					pins = "gpio34", "gpio35",
-					       "gpio36", "gpio37";
-					function = "qup00";
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio44";
+					function = "qup12";
 				};
-			};
 
-			qup_uart1_default: qup-uart1-default {
-				pinmux {
-					pins = "gpio0", "gpio1",
-					       "gpio2", "gpio3";
-					function = "qup01";
+				qup_uart8_rx: rx-pins {
+					pins = "gpio45";
+					function = "qup12";
 				};
 			};
 
-			qup_uart2_default: qup-uart2-default {
-				pinmux {
-					pins = "gpio15", "gpio16";
-					function = "qup02_uart";
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio46";
+					function = "qup13_uart";
 				};
-			};
 
-			qup_uart3_default: qup-uart3-default {
-				pinmux {
-					pins = "gpio38", "gpio39",
-					       "gpio40", "gpio41";
-					function = "qup03";
+				qup_uart9_rx: rx-pins {
+					pins = "gpio47";
+					function = "qup13_uart";
 				};
 			};
 
-			qup_uart4_default: qup-uart4-default {
-				pinmux {
-					pins = "gpio115", "gpio116";
-					function = "qup04_uart";
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_cts: cts-pins {
+					pins = "gpio86";
+					function = "qup14";
 				};
-			};
 
-			qup_uart5_default: qup-uart5-default {
-				pinmux {
-					pins = "gpio25", "gpio26",
-					       "gpio27", "gpio28";
-					function = "qup05";
+				qup_uart10_rts: rts-pins {
+					pins = "gpio87";
+					function = "qup14";
 				};
-			};
 
-			qup_uart6_default: qup-uart6-default {
-				pinmux {
-					pins = "gpio59", "gpio60",
-					       "gpio61", "gpio62";
-					function = "qup10";
+				qup_uart10_tx: tx-pins {
+					pins = "gpio88";
+					function = "qup14";
 				};
-			};
 
-			qup_uart7_default: qup-uart7-default {
-				pinmux {
-					pins = "gpio6", "gpio7";
-					function = "qup11_uart";
+				qup_uart10_rx: rx-pins {
+					pins = "gpio89";
+					function = "qup14";
 				};
 			};
 
-			qup_uart8_default: qup-uart8-default {
-				pinmux {
-					pins = "gpio44", "gpio45";
-					function = "qup12";
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_cts: cts-pins {
+					pins = "gpio53";
+					function = "qup15";
 				};
-			};
 
-			qup_uart9_default: qup-uart9-default {
-				pinmux {
-					pins = "gpio46", "gpio47";
-					function = "qup13_uart";
+				qup_uart11_rts: rts-pins {
+					pins = "gpio54";
+					function = "qup15";
 				};
-			};
 
-			qup_uart10_default: qup-uart10-default {
-				pinmux {
-					pins = "gpio86", "gpio87",
-					       "gpio88", "gpio89";
-					function = "qup14";
+				qup_uart11_tx: tx-pins {
+					pins = "gpio55";
+					function = "qup15";
 				};
-			};
 
-			qup_uart11_default: qup-uart11-default {
-				pinmux {
-					pins = "gpio53", "gpio54",
-					       "gpio55", "gpio56";
+				qup_uart11_rx: rx-pins {
+					pins = "gpio56";
 					function = "qup15";
 				};
 			};
 
-			sec_mi2s_active: sec-mi2s-active {
-				pinmux {
-					pins = "gpio49", "gpio50", "gpio51";
-					function = "mi2s_1";
-				};
+			sec_mi2s_active: sec-mi2s-active-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "mi2s_1";
 			};
 
-			pri_mi2s_active: pri-mi2s-active {
-				pinmux {
-					pins = "gpio53", "gpio54", "gpio55", "gpio56";
-					function = "mi2s_0";
-				};
+			pri_mi2s_active: pri-mi2s-active-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "mi2s_0";
 			};
 
-			pri_mi2s_mclk_active: pri-mi2s-mclk-active {
-				pinmux {
-					pins = "gpio57";
-					function = "lpass_ext";
-				};
+			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
+				pins = "gpio57";
+				function = "lpass_ext";
 			};
 		};
 
@@ -2775,6 +2809,7 @@
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -2782,6 +2817,8 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
+			wakeup-source;
+
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
@@ -3012,7 +3049,6 @@
 				power-domains = <&rpmhpd SC7180_CX>;
 
 				phys = <&dsi_phy>;
-				phy-names = "dsi";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3057,7 +3093,7 @@
 				};
 			};
 
-			dsi_phy: dsi-phy@ae94400 {
+			dsi_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3522,7 +3558,7 @@
 		};
 
 		osm_l3: interconnect@18321000 {
-			compatible = "qcom,sc7180-osm-l3";
+			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
 			reg = <0 0x18321000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 25f31c81b2b7..16fb20369c01 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -39,20 +39,10 @@
 			no-map;
 		};
 
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		wpss_mem: memory@9ae00000 {
 			reg = <0x0 0x9ae00000 0x0 0x1900000>;
 			no-map;
 		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
 	};
 };
 
@@ -88,11 +78,6 @@
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
 };
 
-/* Increase the size from 2.5MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x9c900000 0x0 0x800000>;
-};
-
 &wifi {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index dddb505e220b..1185141f348e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -118,25 +118,25 @@ ap_ts_pen_1v8: &i2c13 {
 };
 
 &tlmm {
-	tp_int_odl: tp-int-odl {
+	tp_int_odl: tp-int-odl-state {
 		pins = "gpio7";
 		function = "gpio";
 		bias-disable;
 	};
 
-	ts_int_l: ts-int-l {
+	ts_int_l: ts-int-l-state {
 		pins = "gpio55";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ts_reset_l: ts-reset-l {
+	ts_reset_l: ts-reset-l-state {
 		pins = "gpio54";
 		function = "gpio";
 		bias-disable;
 	};
 
-	us_euro_hs_sel: us-euro-hs-sel {
+	us_euro_hs_sel: us-euro-hs-sel-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-pull-down;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
new file mode 100644
index 000000000000..1ca11a14104d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec and having 3 dmics connected to sc7280.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-3mic";
+
+		audio-routing =	"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb",
+
+				"Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
+			<&lpass_dmic23_data>;
+
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 000000000000..af685bc35e10
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-1mic";
+
+		audio-routing = "Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "ALC5682";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index c72e53aaf997..ae2552094cda 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -167,10 +167,6 @@
 	bias-disable;
 };
 
-&lpass_dmic01_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic01_data {
 	bias-pull-down;
 };
@@ -180,10 +176,6 @@
 	bias-disable;
 };
 
-&lpass_dmic23_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic23_data {
 	bias-pull-down;
 };
@@ -194,30 +186,18 @@
 	bias-disable;
 };
 
-&lpass_rx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_rx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-bus-hold;
 };
 
-&lpass_rx_swr_data_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_clk {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-disable;
 };
 
-&lpass_tx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index f0f26af1e421..4e0b013e25f4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -372,5 +372,6 @@ ap_ts_pen_1v8: &i2c13 {
 			  "",				/* 170 */
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
+			  "",
 			  "";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
new file mode 100644
index 000000000000..14f20e705869
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Evoker with LTE";
+	compatible = "google,evoker-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
new file mode 100644
index 000000000000..4f781fe25c9c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Evoker";
+	compatible = "google,evoker", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
index ccbe50b6249a..3d639c70a06e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -5,14 +5,8 @@
  * Copyright 2022 Google LLC.
  */
 
-/dts-v1/;
-
 #include "sc7280-herobrine.dtsi"
-
-/ {
-	model = "Google Evoker";
-	compatible = "google,evoker", "qcom,sc7280";
-};
+#include "sc7280-herobrine-audio-rt5682-3mic.dtsi"
 
 /*
  * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
@@ -30,16 +24,15 @@ ap_tp_i2c: &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	trackpad: trackpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tp_int_odl>;
 
 		interrupt-parent = <&tlmm>;
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 
-		hid-descr-addr = <0x20>;
 		vcc-supply = <&pp3300_z1>;
 
 		wakeup-source;
@@ -50,9 +43,9 @@ ts_i2c: &i2c13 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	ap_ts: touchscreen@10 {
-		compatible = "elan,ekth6915";
-		reg = <0x10>;
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7986u", "goodix,gt7375p";
+		reg = <0x5d>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
 
@@ -61,7 +54,7 @@ ts_i2c: &i2c13 {
 
 		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
-		vcc33-supply = <&ts_avdd>;
+		vdd-supply = <&ts_avdd>;
 	};
 };
 
@@ -328,6 +321,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index c1a671968725..b04888a98203 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
 #include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
@@ -47,10 +48,6 @@
 
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
-&ap_spi_fp {
-	status = "okay";
-};
-
 /*
  * Although the trackpad is really part of the herobrine baseboard, we'll
  * put the actual definition in the board device tree since different boards
@@ -358,6 +355,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index a92eeccd2b2a..ad66e5e9db4e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -6,6 +6,20 @@
  */
 /* Modem setup is different on Chrome setups than typical Qualcomm setup */
 
+/ {
+	reserved-memory {
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+	};
+};
+
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
 	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
@@ -15,3 +29,8 @@
 			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
 	status = "okay";
 };
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
index f1017809e5da..d71cc4bbc4b3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -5,7 +5,9 @@
  * Copyright 2022 Google LLC.
  */
 
-#include "sc7280-herobrine-villager-r1.dts"
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
 #include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
index cfc648726930..edb52f12f0ea 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
@@ -7,37 +7,10 @@
 
 /dts-v1/;
 
-#include "sc7280-herobrine-villager.dtsi"
-#include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
 
 / {
 	model = "Google Villager (rev1+)";
 	compatible = "google,villager", "qcom,sc7280";
 };
-
-&lpass_va_macro {
-	vdd-micb-supply = <&pp1800_l2c>;
-};
-
-&sound {
-	audio-routing =
-			"IN1_HPHL", "HPHL_OUT",
-			"IN2_HPHR", "HPHR_OUT",
-			"AMIC1", "MIC BIAS1",
-			"AMIC2", "MIC BIAS2",
-			"VA DMIC0", "vdd-micb",
-			"VA DMIC1", "vdd-micb",
-			"VA DMIC2", "vdd-micb",
-			"VA DMIC3", "vdd-micb",
-			"TX SWR_ADC0", "ADC1_OUTPUT",
-			"TX SWR_ADC1", "ADC2_OUTPUT",
-			"TX SWR_ADC2", "ADC3_OUTPUT",
-			"TX SWR_DMIC0", "DMIC1_OUTPUT",
-			"TX SWR_DMIC1", "DMIC2_OUTPUT",
-			"TX SWR_DMIC2", "DMIC3_OUTPUT",
-			"TX SWR_DMIC3", "DMIC4_OUTPUT",
-			"TX SWR_DMIC4", "DMIC5_OUTPUT",
-			"TX SWR_DMIC5", "DMIC6_OUTPUT",
-			"TX SWR_DMIC6", "DMIC7_OUTPUT",
-			"TX SWR_DMIC7", "DMIC8_OUTPUT";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
new file mode 100644
index 000000000000..b25df5a99161
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+};
+
+&sound {
+	audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
index 4566722bf4dd..17553e0fd6fd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -78,16 +78,6 @@ ts_i2c: &i2c13 {
 	status = "okay";
 };
 
-/* For nvme */
-&pcie1 {
-	status = "okay";
-};
-
-/* For nvme */
-&pcie1_phy {
-	status = "okay";
-};
-
 &pwmleds {
 	status = "okay";
 };
@@ -321,6 +311,5 @@ ts_i2c: &i2c13 {
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
 			  "",
-			  "",
 			  "";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
new file mode 100644
index 000000000000..2febd6126d4c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for WIFI SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
+
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
new file mode 100644
index 000000000000..c9fe64529555
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE";
+	compatible = "google,zombie-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
new file mode 100644
index 000000000000..0246c12b2f40
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Zombie";
+	compatible = "google,zombie", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
new file mode 100644
index 000000000000..7fc0b6bfc0d6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x01>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight{
+	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
+	pwms = <&pm8350c_pwm 3 200000>;
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e37160f34..27f479ff9d80 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -307,7 +307,7 @@
 	pwmleds: pwmleds {
 		compatible = "pwm-leds";
 		status = "disabled";
-		keyboard_backlight: keyboard-backlight {
+		keyboard_backlight: led-0 {
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			pwms = <&cros_ec_pwm 0>;
@@ -503,13 +503,16 @@ ap_spi_fp: &spi9 {
 	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
-		compatible = "google,cros-ec-spi";
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_mcu>;
 	};
 };
 
@@ -627,6 +630,13 @@ ap_ec_spi: &spi10 {
 
 &usb_1_hsphy {
 	status = "okay";
+
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
 };
 
 &usb_1_qmpphy {
@@ -639,6 +649,21 @@ ap_ec_spi: &spi10 {
 	bias-disable;
 };
 
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
 &pcie1_clkreq_n {
 	bias-pull-up;
 	drive-strength = <2>;
@@ -744,27 +769,27 @@ ap_ec_spi: &spi10 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bios_flash_wp_od>;
 
-	amp_en: amp-en-pins {
+	amp_en: amp-en-state {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ap_ec_int_l: ap-ec-int-l-pins {
+	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio18";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	bios_flash_wp_od: bios-flash-wp-od-pins {
+	bios_flash_wp_od: bios-flash-wp-od-state {
 		pins = "gpio16";
 		function = "gpio";
 		/* Has external pull */
 		bias-disable;
 	};
 
-	en_fp_rails: en-fp-rails-pins {
+	en_fp_rails: en-fp-rails-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-disable;
@@ -772,60 +797,60 @@ ap_ec_spi: &spi10 {
 		output-high;
 	};
 
-	en_pp3300_codec: en-pp3300-codec-pins {
+	en_pp3300_codec: en-pp3300-codec-state {
 		pins = "gpio105";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	en_pp3300_dx_edp: en-pp3300-dx-edp-pins {
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
 		pins = "gpio80";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_rst_l: fp-rst-l-pins {
+	fp_rst_l: fp-rst-l-state {
 		pins = "gpio78";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_to_ap_irq_l: fp-to-ap-irq-l-pins {
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
 		pins = "gpio61";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	fpmcu_boot0: fpmcu-boot0-pins {
+	fpmcu_boot0: fpmcu-boot0-state {
 		pins = "gpio68";
 		function = "gpio";
 		bias-disable;
 	};
 
-	gsc_ap_int_odl: gsc-ap-int-odl-pins {
+	gsc_ap_int_odl: gsc-ap-int-odl-state {
 		pins = "gpio104";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hp_irq: hp-irq-pins {
+	hp_irq: hp-irq-state {
 		pins = "gpio101";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hub_en: hub-en-pins {
+	hub_en: hub-en-state {
 		pins = "gpio157";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	pe_wake_odl: pe-wake-odl-pins {
+	pe_wake_odl: pe-wake-odl-state {
 		pins = "gpio3";
 		function = "gpio";
 		/* Has external pull */
@@ -834,45 +859,45 @@ ap_ec_spi: &spi10 {
 	};
 
 	/* For ap_spi_fp */
-	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins {
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
 		pins = "gpio39";
 		function = "gpio";
 		output-high;
 	};
 
 	/* For ap_ec_spi */
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
 		pins = "gpio43";
 		function = "gpio";
 		output-high;
 	};
 
-	sar0_irq_odl: sar0-irq-odl-pins {
+	sar0_irq_odl: sar0-irq-odl-state {
 		pins = "gpio141";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sar1_irq_odl: sar1-irq-odl-pins {
+	sar1_irq_odl: sar1-irq-odl-state {
 		pins = "gpio140";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sd_cd_odl: sd-cd-odl-pins {
+	sd_cd_odl: sd-cd-odl-state {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ssd_en: ssd-en-pins {
+	ssd_en: ssd-en-state {
 		pins = "gpio51";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ssd_rst_l: ssd-rst-l-pins {
+	ssd_rst_l: ssd-rst-l-state {
 		pins = "gpio2";
 		function = "gpio";
 		bias-disable;
@@ -880,14 +905,14 @@ ap_ec_spi: &spi10 {
 		output-low;
 	};
 
-	tp_int_odl: tp-int-odl-pins {
+	tp_int_odl: tp-int-odl-state {
 		pins = "gpio7";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	wf_cam_en: wf-cam-en-pins {
+	wf_cam_en: wf-cam-en-state {
 		pins = "gpio119";
 		function = "gpio";
 		/* Has external pulldown */
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index 7f5143e9bb80..3cfeb118d379 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -79,27 +79,29 @@ ap_h1_spi: &spi14 {
 };
 
 &tlmm {
-	ap_ec_int_l: ap-ec-int-l-pins {
+	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio18";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl-pins {
+	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio104";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
 		pins = "gpio43";
+		function = "gpio";
 		output-high;
 	};
 
-	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins {
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
 		pins = "gpio59";
+		function = "gpio";
 		output-high;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 7559164cdda0..ba64316b4427 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -10,7 +10,6 @@
 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include "sc7280-idp.dtsi"
 #include "pmr735a.dtsi"
-#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
@@ -61,11 +60,6 @@
 	vddio-supply = <&vreg_l19b_1p8>;
 };
 
-&ipa {
-	status = "okay";
-	modem-init;
-};
-
 &pmk8350_rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cd432a2856a7..f7efb9966afd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -13,6 +13,7 @@
 #include "pmk8350.dtsi"
 
 #include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	aliases {
@@ -34,7 +35,7 @@
 		pinctrl-0 = <&wcd_reset_n>;
 		pinctrl-1 = <&wcd_reset_n_sleep>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 
 		qcom,rx-device = <&wcd_rx>;
 		qcom,tx-device = <&wcd_tx>;
@@ -522,6 +523,12 @@
 	vdda-pll-supply = <&vreg_l10c_0p8>;
 	vdda33-supply = <&vreg_l2b_3p0>;
 	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
 };
 
 &usb_1_qmpphy {
@@ -569,10 +576,6 @@
 	bias-disable;
 };
 
-&lpass_dmic01_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic01_data {
 	bias-pull-down;
 };
@@ -582,10 +585,6 @@
 	bias-disable;
 };
 
-&lpass_dmic23_clk_sleep {
-	drive-strength = <2>;
-};
-
 &lpass_dmic23_data {
 	bias-pull-down;
 };
@@ -596,30 +595,18 @@
 	bias-disable;
 };
 
-&lpass_rx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_rx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-bus-hold;
 };
 
-&lpass_rx_swr_data_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_clk {
 	drive-strength = <2>;
 	slew-rate = <1>;
 	bias-disable;
 };
 
-&lpass_tx_swr_clk_sleep {
-	bias-pull-down;
-};
-
 &lpass_tx_swr_data {
 	drive-strength = <2>;
 	slew-rate = <1>;
@@ -747,24 +734,24 @@
 };
 
 &tlmm {
-	amp_en: amp-en {
+	amp_en: amp-en-state {
 		pins = "gpio63";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	bt_en: bt-en-pins {
+	bt_en: bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
 		output-low;
 		bias-disable;
 	};
 
-	nvme_pwren: nvme-pwren-pins {
+	nvme_pwren: nvme-pwren-state {
 		function = "gpio";
 	};
 
-	pcie1_reset_n: pcie1-reset-n-pins {
+	pcie1_reset_n: pcie1-reset-n-state {
 		pins = "gpio2";
 		function = "gpio";
 
@@ -773,7 +760,7 @@
 		bias-disable;
 	};
 
-	pcie1_wake_n: pcie1-wake-n-pins {
+	pcie1_wake_n: pcie1-wake-n-state {
 		pins = "gpio3";
 		function = "gpio";
 
@@ -781,7 +768,7 @@
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -794,7 +781,7 @@
 		bias-bus-hold;
 	};
 
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -806,7 +793,7 @@
 		bias-pull-down;
 	};
 
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -816,7 +803,7 @@
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -827,25 +814,25 @@
 		bias-pull-up;
 	};
 
-	sd_cd: sd-cd-pins {
+	sd_cd: sd-cd-state {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sw_ctrl: sw-ctrl-pins {
+	sw_ctrl: sw-ctrl-state {
 		pins = "gpio86";
 		function = "gpio";
 		bias-pull-down;
 	};
 
-	wcd_reset_n: wcd-reset-n {
+	wcd_reset_n: wcd-reset-n-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
 	};
 
-	wcd_reset_n_sleep: wcd-reset-n-sleep {
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4b8c676b0bb1..df49564ae6dc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -37,7 +37,7 @@
 		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
 		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		qcom,rx-device = <&wcd_rx>;
@@ -595,7 +595,7 @@ mos_bt_uart: &uart7 {
 };
 
 &tlmm {
-	mos_bt_en: mos-bt-en-pins {
+	mos_bt_en: mos-bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
 		drive-strength = <2>;
@@ -603,7 +603,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -617,7 +617,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -630,7 +630,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -642,7 +642,7 @@ mos_bt_uart: &uart7 {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -652,32 +652,32 @@ mos_bt_uart: &uart7 {
 		bias-pull-up;
 	};
 
-	ts_int_conn: ts-int-conn-pins {
+	ts_int_conn: ts-int-conn-state {
 		pins = "gpio55";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ts_rst_conn: ts-rst-conn-pins {
+	ts_rst_conn: ts-rst-conn-state {
 		pins = "gpio54";
 		function = "gpio";
 		drive-strength = <2>;
 	};
 
-	us_euro_hs_sel: us-euro-hs-sel {
+	us_euro_hs_sel: us-euro-hs-sel-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	wcd_reset_n: wcd-reset-n {
+	wcd_reset_n: wcd-reset-n-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
 	};
 
-	wcd_reset_n_sleep: wcd-reset-n-sleep {
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
 		pins = "gpio83";
 		function = "gpio";
 		drive-strength = <8>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 212580316d3e..0adf13399e64 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -752,6 +752,17 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		wlan_smp2p_out: wlan-ap-to-wpss {
+			qcom,entry-name = "wlan";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmu {
@@ -920,7 +931,7 @@
 
 		gpi_dma0: dma-controller@900000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -967,6 +978,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1025,6 +1038,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1083,6 +1098,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1141,6 +1158,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1199,6 +1218,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1257,6 +1278,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1315,6 +1338,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1373,6 +1398,8 @@
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1419,7 +1446,7 @@
 
 		gpi_dma1: dma-controller@a00000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1466,6 +1493,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1524,6 +1553,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1582,6 +1613,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1640,6 +1673,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1698,6 +1733,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1756,6 +1793,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1814,6 +1853,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1872,6 +1913,8 @@
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -2004,6 +2047,8 @@
 			qcom,rproc = <&remoteproc_wpss>;
 			memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
 			status = "disabled";
+			qcom,smem-states = <&wlan_smp2p_out 0>;
+			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
 		pcie1: pci@1c08000 {
@@ -2285,7 +2330,6 @@
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
-			qcom,port-offset = <1>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2296,7 +2340,8 @@
 
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
-			reg = <0 0x03300000 0 0x30000>;
+			reg = <0 0x03300000 0 0x30000>,
+			      <0 0x032a9000 0 0x1000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 			       <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
 			clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
@@ -2433,84 +2478,42 @@
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 15>;
 
-			#clock-cells = <1>;
-
-			lpass_dmic01_clk: dmic01-clk {
-				pins = "gpio6";
-				function = "dmic1_clk";
-			};
-
-			lpass_dmic01_clk_sleep: dmic01-clk-sleep {
+			lpass_dmic01_clk: dmic01-clk-state {
 				pins = "gpio6";
 				function = "dmic1_clk";
 			};
 
-			lpass_dmic01_data: dmic01-data {
+			lpass_dmic01_data: dmic01-data-state {
 				pins = "gpio7";
 				function = "dmic1_data";
 			};
 
-			lpass_dmic01_data_sleep: dmic01-data-sleep {
-				pins = "gpio7";
-				function = "dmic1_data";
-			};
-
-			lpass_dmic23_clk: dmic23-clk {
-				pins = "gpio8";
-				function = "dmic2_clk";
-			};
-
-			lpass_dmic23_clk_sleep: dmic23-clk-sleep {
+			lpass_dmic23_clk: dmic23-clk-state {
 				pins = "gpio8";
 				function = "dmic2_clk";
 			};
 
-			lpass_dmic23_data: dmic23-data {
+			lpass_dmic23_data: dmic23-data-state {
 				pins = "gpio9";
 				function = "dmic2_data";
 			};
 
-			lpass_dmic23_data_sleep: dmic23-data-sleep {
-				pins = "gpio9";
-				function = "dmic2_data";
-			};
-
-			lpass_rx_swr_clk: rx-swr-clk {
+			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";
 			};
 
-			lpass_rx_swr_clk_sleep: rx-swr-clk-sleep {
-				pins = "gpio3";
-				function = "swr_rx_clk";
-			};
-
-			lpass_rx_swr_data: rx-swr-data {
+			lpass_rx_swr_data: rx-swr-data-state {
 				pins = "gpio4", "gpio5";
 				function = "swr_rx_data";
 			};
 
-			lpass_rx_swr_data_sleep: rx-swr-data-sleep {
-				pins = "gpio4", "gpio5";
-				function = "swr_rx_data";
-			};
-
-			lpass_tx_swr_clk: tx-swr-clk {
-				pins = "gpio0";
-				function = "swr_tx_clk";
-			};
-
-			lpass_tx_swr_clk_sleep: tx-swr-clk-sleep {
+			lpass_tx_swr_clk: tx-swr-clk-state {
 				pins = "gpio0";
 				function = "swr_tx_clk";
 			};
 
-			lpass_tx_swr_data: tx-swr-data {
-				pins = "gpio1", "gpio2", "gpio14";
-				function = "swr_tx_data";
-			};
-
-			lpass_tx_swr_data_sleep: tx-swr-data-sleep {
+			lpass_tx_swr_data: tx-swr-data-state {
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
 			};
@@ -3923,11 +3926,13 @@
 					      "iface",
 					      "bus";
 
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
 
 				phys = <&mdss_dsi_phy>;
-				phy-names = "dsi";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -4258,791 +4263,791 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
-			dp_hot_plug_det: dp-hot-plug-det-pins {
+			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
 			};
 
-			edp_hot_plug_det: edp-hot-plug-det-pins {
+			edp_hot_plug_det: edp-hot-plug-det-state {
 				pins = "gpio60";
 				function = "edp_hot";
 			};
 
-			mi2s0_data0: mi2s0-data0-pins {
+			mi2s0_data0: mi2s0-data0-state {
 				pins = "gpio98";
 				function = "mi2s0_data0";
 			};
 
-			mi2s0_data1: mi2s0-data1-pins {
+			mi2s0_data1: mi2s0-data1-state {
 				pins = "gpio99";
 				function = "mi2s0_data1";
 			};
 
-			mi2s0_mclk: mi2s0-mclk-pins {
+			mi2s0_mclk: mi2s0-mclk-state {
 				pins = "gpio96";
 				function = "pri_mi2s";
 			};
 
-			mi2s0_sclk: mi2s0-sclk-pins {
+			mi2s0_sclk: mi2s0-sclk-state {
 				pins = "gpio97";
 				function = "mi2s0_sck";
 			};
 
-			mi2s0_ws: mi2s0-ws-pins {
+			mi2s0_ws: mi2s0-ws-state {
 				pins = "gpio100";
 				function = "mi2s0_ws";
 			};
 
-			mi2s1_data0: mi2s1-data0-pins {
+			mi2s1_data0: mi2s1-data0-state {
 				pins = "gpio107";
 				function = "mi2s1_data0";
 			};
 
-			mi2s1_sclk: mi2s1-sclk-pins {
+			mi2s1_sclk: mi2s1-sclk-state {
 				pins = "gpio106";
 				function = "mi2s1_sck";
 			};
 
-			mi2s1_ws: mi2s1-ws-pins {
+			mi2s1_ws: mi2s1-ws-state {
 				pins = "gpio108";
 				function = "mi2s1_ws";
 			};
 
-			pcie1_clkreq_n: pcie1-clkreq-n-pins {
+			pcie1_clkreq_n: pcie1-clkreq-n-state {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
 			};
 
-			qspi_clk: qspi-clk-pins {
+			qspi_clk: qspi-clk-state {
 				pins = "gpio14";
 				function = "qspi_clk";
 			};
 
-			qspi_cs0: qspi-cs0-pins {
+			qspi_cs0: qspi-cs0-state {
 				pins = "gpio15";
 				function = "qspi_cs";
 			};
 
-			qspi_cs1: qspi-cs1-pins {
+			qspi_cs1: qspi-cs1-state {
 				pins = "gpio19";
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01-pins {
+			qspi_data01: qspi-data01-state {
 				pins = "gpio12", "gpio13";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-pins {
+			qspi_data12: qspi-data12-state {
 				pins = "gpio16", "gpio17";
 				function = "qspi_data";
 			};
 
-			qup_i2c0_data_clk: qup-i2c0-data-clk-pins {
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio0", "gpio1";
 				function = "qup00";
 			};
 
-			qup_i2c1_data_clk: qup-i2c1-data-clk-pins {
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio4", "gpio5";
 				function = "qup01";
 			};
 
-			qup_i2c2_data_clk: qup-i2c2-data-clk-pins {
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 				pins = "gpio8", "gpio9";
 				function = "qup02";
 			};
 
-			qup_i2c3_data_clk: qup-i2c3-data-clk-pins {
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				pins = "gpio12", "gpio13";
 				function = "qup03";
 			};
 
-			qup_i2c4_data_clk: qup-i2c4-data-clk-pins {
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 				pins = "gpio16", "gpio17";
 				function = "qup04";
 			};
 
-			qup_i2c5_data_clk: qup-i2c5-data-clk-pins {
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 				pins = "gpio20", "gpio21";
 				function = "qup05";
 			};
 
-			qup_i2c6_data_clk: qup-i2c6-data-clk-pins {
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 				pins = "gpio24", "gpio25";
 				function = "qup06";
 			};
 
-			qup_i2c7_data_clk: qup-i2c7-data-clk-pins {
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
 				pins = "gpio28", "gpio29";
 				function = "qup07";
 			};
 
-			qup_i2c8_data_clk: qup-i2c8-data-clk-pins {
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
 				pins = "gpio32", "gpio33";
 				function = "qup10";
 			};
 
-			qup_i2c9_data_clk: qup-i2c9-data-clk-pins {
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
 				pins = "gpio36", "gpio37";
 				function = "qup11";
 			};
 
-			qup_i2c10_data_clk: qup-i2c10-data-clk-pins {
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
 				pins = "gpio40", "gpio41";
 				function = "qup12";
 			};
 
-			qup_i2c11_data_clk: qup-i2c11-data-clk-pins {
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
 				pins = "gpio44", "gpio45";
 				function = "qup13";
 			};
 
-			qup_i2c12_data_clk: qup-i2c12-data-clk-pins {
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
 				pins = "gpio48", "gpio49";
 				function = "qup14";
 			};
 
-			qup_i2c13_data_clk: qup-i2c13-data-clk-pins {
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
 				pins = "gpio52", "gpio53";
 				function = "qup15";
 			};
 
-			qup_i2c14_data_clk: qup-i2c14-data-clk-pins {
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
 				pins = "gpio56", "gpio57";
 				function = "qup16";
 			};
 
-			qup_i2c15_data_clk: qup-i2c15-data-clk-pins {
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
 				pins = "gpio60", "gpio61";
 				function = "qup17";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk-pins {
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
 				pins = "gpio0", "gpio1", "gpio2";
 				function = "qup00";
 			};
 
-			qup_spi0_cs: qup-spi0-cs-pins {
+			qup_spi0_cs: qup-spi0-cs-state {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins {
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
 				pins = "gpio3";
 				function = "gpio";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk-pins {
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
 				pins = "gpio4", "gpio5", "gpio6";
 				function = "qup01";
 			};
 
-			qup_spi1_cs: qup-spi1-cs-pins {
+			qup_spi1_cs: qup-spi1-cs-state {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins {
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
 				pins = "gpio7";
 				function = "gpio";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk-pins {
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
 				pins = "gpio8", "gpio9", "gpio10";
 				function = "qup02";
 			};
 
-			qup_spi2_cs: qup-spi2-cs-pins {
+			qup_spi2_cs: qup-spi2-cs-state {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins {
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
 				pins = "gpio11";
 				function = "gpio";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk-pins {
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
 				pins = "gpio12", "gpio13", "gpio14";
 				function = "qup03";
 			};
 
-			qup_spi3_cs: qup-spi3-cs-pins {
+			qup_spi3_cs: qup-spi3-cs-state {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins {
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
 				pins = "gpio15";
 				function = "gpio";
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk-pins {
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
 				pins = "gpio16", "gpio17", "gpio18";
 				function = "qup04";
 			};
 
-			qup_spi4_cs: qup-spi4-cs-pins {
+			qup_spi4_cs: qup-spi4-cs-state {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins {
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
 				pins = "gpio19";
 				function = "gpio";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk-pins {
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
 				pins = "gpio20", "gpio21", "gpio22";
 				function = "qup05";
 			};
 
-			qup_spi5_cs: qup-spi5-cs-pins {
+			qup_spi5_cs: qup-spi5-cs-state {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins {
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
 				pins = "gpio23";
 				function = "gpio";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk-pins {
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
 				pins = "gpio24", "gpio25", "gpio26";
 				function = "qup06";
 			};
 
-			qup_spi6_cs: qup-spi6-cs-pins {
+			qup_spi6_cs: qup-spi6-cs-state {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins {
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
 				pins = "gpio27";
 				function = "gpio";
 			};
 
-			qup_spi7_data_clk: qup-spi7-data-clk-pins {
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
 				pins = "gpio28", "gpio29", "gpio30";
 				function = "qup07";
 			};
 
-			qup_spi7_cs: qup-spi7-cs-pins {
+			qup_spi7_cs: qup-spi7-cs-state {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins {
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
 				pins = "gpio31";
 				function = "gpio";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk-pins {
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
 				pins = "gpio32", "gpio33", "gpio34";
 				function = "qup10";
 			};
 
-			qup_spi8_cs: qup-spi8-cs-pins {
+			qup_spi8_cs: qup-spi8-cs-state {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins {
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
 				pins = "gpio35";
 				function = "gpio";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk-pins {
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
 				pins = "gpio36", "gpio37", "gpio38";
 				function = "qup11";
 			};
 
-			qup_spi9_cs: qup-spi9-cs-pins {
+			qup_spi9_cs: qup-spi9-cs-state {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins {
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
 				pins = "gpio39";
 				function = "gpio";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk-pins {
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
 				pins = "gpio40", "gpio41", "gpio42";
 				function = "qup12";
 			};
 
-			qup_spi10_cs: qup-spi10-cs-pins {
+			qup_spi10_cs: qup-spi10-cs-state {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins {
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
 				pins = "gpio43";
 				function = "gpio";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk-pins {
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
 				pins = "gpio44", "gpio45", "gpio46";
 				function = "qup13";
 			};
 
-			qup_spi11_cs: qup-spi11-cs-pins {
+			qup_spi11_cs: qup-spi11-cs-state {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins {
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
 				pins = "gpio47";
 				function = "gpio";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk-pins {
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
 				pins = "gpio48", "gpio49", "gpio50";
 				function = "qup14";
 			};
 
-			qup_spi12_cs: qup-spi12-cs-pins {
+			qup_spi12_cs: qup-spi12-cs-state {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins {
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
 				pins = "gpio51";
 				function = "gpio";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk-pins {
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
 				pins = "gpio52", "gpio53", "gpio54";
 				function = "qup15";
 			};
 
-			qup_spi13_cs: qup-spi13-cs-pins {
+			qup_spi13_cs: qup-spi13-cs-state {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins {
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
 				pins = "gpio55";
 				function = "gpio";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk-pins {
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
 				pins = "gpio56", "gpio57", "gpio58";
 				function = "qup16";
 			};
 
-			qup_spi14_cs: qup-spi14-cs-pins {
+			qup_spi14_cs: qup-spi14-cs-state {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins {
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
 				pins = "gpio59";
 				function = "gpio";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk-pins {
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
 				pins = "gpio60", "gpio61", "gpio62";
 				function = "qup17";
 			};
 
-			qup_spi15_cs: qup-spi15-cs-pins {
+			qup_spi15_cs: qup-spi15-cs-state {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins {
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
 				pins = "gpio63";
 				function = "gpio";
 			};
 
-			qup_uart0_cts: qup-uart0-cts-pins {
+			qup_uart0_cts: qup-uart0-cts-state {
 				pins = "gpio0";
 				function = "qup00";
 			};
 
-			qup_uart0_rts: qup-uart0-rts-pins {
+			qup_uart0_rts: qup-uart0-rts-state {
 				pins = "gpio1";
 				function = "qup00";
 			};
 
-			qup_uart0_tx: qup-uart0-tx-pins {
+			qup_uart0_tx: qup-uart0-tx-state {
 				pins = "gpio2";
 				function = "qup00";
 			};
 
-			qup_uart0_rx: qup-uart0-rx-pins {
+			qup_uart0_rx: qup-uart0-rx-state {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_uart1_cts: qup-uart1-cts-pins {
+			qup_uart1_cts: qup-uart1-cts-state {
 				pins = "gpio4";
 				function = "qup01";
 			};
 
-			qup_uart1_rts: qup-uart1-rts-pins {
+			qup_uart1_rts: qup-uart1-rts-state {
 				pins = "gpio5";
 				function = "qup01";
 			};
 
-			qup_uart1_tx: qup-uart1-tx-pins {
+			qup_uart1_tx: qup-uart1-tx-state {
 				pins = "gpio6";
 				function = "qup01";
 			};
 
-			qup_uart1_rx: qup-uart1-rx-pins {
+			qup_uart1_rx: qup-uart1-rx-state {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_uart2_cts: qup-uart2-cts-pins {
+			qup_uart2_cts: qup-uart2-cts-state {
 				pins = "gpio8";
 				function = "qup02";
 			};
 
-			qup_uart2_rts: qup-uart2-rts-pins {
+			qup_uart2_rts: qup-uart2-rts-state {
 				pins = "gpio9";
 				function = "qup02";
 			};
 
-			qup_uart2_tx: qup-uart2-tx-pins {
+			qup_uart2_tx: qup-uart2-tx-state {
 				pins = "gpio10";
 				function = "qup02";
 			};
 
-			qup_uart2_rx: qup-uart2-rx-pins {
+			qup_uart2_rx: qup-uart2-rx-state {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_uart3_cts: qup-uart3-cts-pins {
+			qup_uart3_cts: qup-uart3-cts-state {
 				pins = "gpio12";
 				function = "qup03";
 			};
 
-			qup_uart3_rts: qup-uart3-rts-pins {
+			qup_uart3_rts: qup-uart3-rts-state {
 				pins = "gpio13";
 				function = "qup03";
 			};
 
-			qup_uart3_tx: qup-uart3-tx-pins {
+			qup_uart3_tx: qup-uart3-tx-state {
 				pins = "gpio14";
 				function = "qup03";
 			};
 
-			qup_uart3_rx: qup-uart3-rx-pins {
+			qup_uart3_rx: qup-uart3-rx-state {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_uart4_cts: qup-uart4-cts-pins {
+			qup_uart4_cts: qup-uart4-cts-state {
 				pins = "gpio16";
 				function = "qup04";
 			};
 
-			qup_uart4_rts: qup-uart4-rts-pins {
+			qup_uart4_rts: qup-uart4-rts-state {
 				pins = "gpio17";
 				function = "qup04";
 			};
 
-			qup_uart4_tx: qup-uart4-tx-pins {
+			qup_uart4_tx: qup-uart4-tx-state {
 				pins = "gpio18";
 				function = "qup04";
 			};
 
-			qup_uart4_rx: qup-uart4-rx-pins {
+			qup_uart4_rx: qup-uart4-rx-state {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_uart5_cts: qup-uart5-cts-pins {
+			qup_uart5_cts: qup-uart5-cts-state {
 				pins = "gpio20";
 				function = "qup05";
 			};
 
-			qup_uart5_rts: qup-uart5-rts-pins {
+			qup_uart5_rts: qup-uart5-rts-state {
 				pins = "gpio21";
 				function = "qup05";
 			};
 
-			qup_uart5_tx: qup-uart5-tx-pins {
+			qup_uart5_tx: qup-uart5-tx-state {
 				pins = "gpio22";
 				function = "qup05";
 			};
 
-			qup_uart5_rx: qup-uart5-rx-pins {
+			qup_uart5_rx: qup-uart5-rx-state {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_uart6_cts: qup-uart6-cts-pins {
+			qup_uart6_cts: qup-uart6-cts-state {
 				pins = "gpio24";
 				function = "qup06";
 			};
 
-			qup_uart6_rts: qup-uart6-rts-pins {
+			qup_uart6_rts: qup-uart6-rts-state {
 				pins = "gpio25";
 				function = "qup06";
 			};
 
-			qup_uart6_tx: qup-uart6-tx-pins {
+			qup_uart6_tx: qup-uart6-tx-state {
 				pins = "gpio26";
 				function = "qup06";
 			};
 
-			qup_uart6_rx: qup-uart6-rx-pins {
+			qup_uart6_rx: qup-uart6-rx-state {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_uart7_cts: qup-uart7-cts-pins {
+			qup_uart7_cts: qup-uart7-cts-state {
 				pins = "gpio28";
 				function = "qup07";
 			};
 
-			qup_uart7_rts: qup-uart7-rts-pins {
+			qup_uart7_rts: qup-uart7-rts-state {
 				pins = "gpio29";
 				function = "qup07";
 			};
 
-			qup_uart7_tx: qup-uart7-tx-pins {
+			qup_uart7_tx: qup-uart7-tx-state {
 				pins = "gpio30";
 				function = "qup07";
 			};
 
-			qup_uart7_rx: qup-uart7-rx-pins {
+			qup_uart7_rx: qup-uart7-rx-state {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_uart8_cts: qup-uart8-cts-pins {
+			qup_uart8_cts: qup-uart8-cts-state {
 				pins = "gpio32";
 				function = "qup10";
 			};
 
-			qup_uart8_rts: qup-uart8-rts-pins {
+			qup_uart8_rts: qup-uart8-rts-state {
 				pins = "gpio33";
 				function = "qup10";
 			};
 
-			qup_uart8_tx: qup-uart8-tx-pins {
+			qup_uart8_tx: qup-uart8-tx-state {
 				pins = "gpio34";
 				function = "qup10";
 			};
 
-			qup_uart8_rx: qup-uart8-rx-pins {
+			qup_uart8_rx: qup-uart8-rx-state {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_uart9_cts: qup-uart9-cts-pins {
+			qup_uart9_cts: qup-uart9-cts-state {
 				pins = "gpio36";
 				function = "qup11";
 			};
 
-			qup_uart9_rts: qup-uart9-rts-pins {
+			qup_uart9_rts: qup-uart9-rts-state {
 				pins = "gpio37";
 				function = "qup11";
 			};
 
-			qup_uart9_tx: qup-uart9-tx-pins {
+			qup_uart9_tx: qup-uart9-tx-state {
 				pins = "gpio38";
 				function = "qup11";
 			};
 
-			qup_uart9_rx: qup-uart9-rx-pins {
+			qup_uart9_rx: qup-uart9-rx-state {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_uart10_cts: qup-uart10-cts-pins {
+			qup_uart10_cts: qup-uart10-cts-state {
 				pins = "gpio40";
 				function = "qup12";
 			};
 
-			qup_uart10_rts: qup-uart10-rts-pins {
+			qup_uart10_rts: qup-uart10-rts-state {
 				pins = "gpio41";
 				function = "qup12";
 			};
 
-			qup_uart10_tx: qup-uart10-tx-pins {
+			qup_uart10_tx: qup-uart10-tx-state {
 				pins = "gpio42";
 				function = "qup12";
 			};
 
-			qup_uart10_rx: qup-uart10-rx-pins {
+			qup_uart10_rx: qup-uart10-rx-state {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_uart11_cts: qup-uart11-cts-pins {
+			qup_uart11_cts: qup-uart11-cts-state {
 				pins = "gpio44";
 				function = "qup13";
 			};
 
-			qup_uart11_rts: qup-uart11-rts-pins {
+			qup_uart11_rts: qup-uart11-rts-state {
 				pins = "gpio45";
 				function = "qup13";
 			};
 
-			qup_uart11_tx: qup-uart11-tx-pins {
+			qup_uart11_tx: qup-uart11-tx-state {
 				pins = "gpio46";
 				function = "qup13";
 			};
 
-			qup_uart11_rx: qup-uart11-rx-pins {
+			qup_uart11_rx: qup-uart11-rx-state {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_uart12_cts: qup-uart12-cts-pins {
+			qup_uart12_cts: qup-uart12-cts-state {
 				pins = "gpio48";
 				function = "qup14";
 			};
 
-			qup_uart12_rts: qup-uart12-rts-pins {
+			qup_uart12_rts: qup-uart12-rts-state {
 				pins = "gpio49";
 				function = "qup14";
 			};
 
-			qup_uart12_tx: qup-uart12-tx-pins {
+			qup_uart12_tx: qup-uart12-tx-state {
 				pins = "gpio50";
 				function = "qup14";
 			};
 
-			qup_uart12_rx: qup-uart12-rx-pins {
+			qup_uart12_rx: qup-uart12-rx-state {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_uart13_cts: qup-uart13-cts-pins {
+			qup_uart13_cts: qup-uart13-cts-state {
 				pins = "gpio52";
 				function = "qup15";
 			};
 
-			qup_uart13_rts: qup-uart13-rts-pins {
+			qup_uart13_rts: qup-uart13-rts-state {
 				pins = "gpio53";
 				function = "qup15";
 			};
 
-			qup_uart13_tx: qup-uart13-tx-pins {
+			qup_uart13_tx: qup-uart13-tx-state {
 				pins = "gpio54";
 				function = "qup15";
 			};
 
-			qup_uart13_rx: qup-uart13-rx-pins {
+			qup_uart13_rx: qup-uart13-rx-state {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_uart14_cts: qup-uart14-cts-pins {
+			qup_uart14_cts: qup-uart14-cts-state {
 				pins = "gpio56";
 				function = "qup16";
 			};
 
-			qup_uart14_rts: qup-uart14-rts-pins {
+			qup_uart14_rts: qup-uart14-rts-state {
 				pins = "gpio57";
 				function = "qup16";
 			};
 
-			qup_uart14_tx: qup-uart14-tx-pins {
+			qup_uart14_tx: qup-uart14-tx-state {
 				pins = "gpio58";
 				function = "qup16";
 			};
 
-			qup_uart14_rx: qup-uart14-rx-pins {
+			qup_uart14_rx: qup-uart14-rx-state {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_uart15_cts: qup-uart15-cts-pins {
+			qup_uart15_cts: qup-uart15-cts-state {
 				pins = "gpio60";
 				function = "qup17";
 			};
 
-			qup_uart15_rts: qup-uart15-rts-pins {
+			qup_uart15_rts: qup-uart15-rts-state {
 				pins = "gpio61";
 				function = "qup17";
 			};
 
-			qup_uart15_tx: qup-uart15-tx-pins {
+			qup_uart15_tx: qup-uart15-tx-state {
 				pins = "gpio62";
 				function = "qup17";
 			};
 
-			qup_uart15_rx: qup-uart15-rx-pins {
+			qup_uart15_rx: qup-uart15-rx-state {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			sdc1_clk: sdc1-clk-pins {
+			sdc1_clk: sdc1-clk-state {
 				pins = "sdc1_clk";
 			};
 
-			sdc1_cmd: sdc1-cmd-pins {
+			sdc1_cmd: sdc1-cmd-state {
 				pins = "sdc1_cmd";
 			};
 
-			sdc1_data: sdc1-data-pins {
+			sdc1_data: sdc1-data-state {
 				pins = "sdc1_data";
 			};
 
-			sdc1_rclk: sdc1-rclk-pins {
+			sdc1_rclk: sdc1-rclk-state {
 				pins = "sdc1_rclk";
 			};
 
-			sdc1_clk_sleep: sdc1-clk-sleep-pins {
+			sdc1_clk_sleep: sdc1-clk-sleep-state {
 				pins = "sdc1_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_cmd_sleep: sdc1-cmd-sleep-pins {
+			sdc1_cmd_sleep: sdc1-cmd-sleep-state {
 				pins = "sdc1_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_data_sleep: sdc1-data-sleep-pins {
+			sdc1_data_sleep: sdc1-data-sleep-state {
 				pins = "sdc1_data";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_rclk_sleep: sdc1-rclk-sleep-pins {
+			sdc1_rclk_sleep: sdc1-rclk-sleep-state {
 				pins = "sdc1_rclk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_clk: sdc2-clk-pins {
+			sdc2_clk: sdc2-clk-state {
 				pins = "sdc2_clk";
 			};
 
-			sdc2_cmd: sdc2-cmd-pins {
+			sdc2_cmd: sdc2-cmd-state {
 				pins = "sdc2_cmd";
 			};
 
-			sdc2_data: sdc2-data-pins {
+			sdc2_data: sdc2-data-state {
 				pins = "sdc2_data";
 			};
 
-			sdc2_clk_sleep: sdc2-clk-sleep-pins {
+			sdc2_clk_sleep: sdc2-clk-sleep-state {
 				pins = "sdc2_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_cmd_sleep: sdc2-cmd-sleep-pins {
+			sdc2_cmd_sleep: sdc2-cmd-sleep-state {
 				pins = "sdc2_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_data_sleep: sdc2-data-sleep-pins {
+			sdc2_data_sleep: sdc2-data-sleep-state {
 				pins = "sdc2_data";
 				drive-strength = <2>;
 				bias-bus-hold;
@@ -5313,7 +5318,7 @@
 		};
 
 		epss_l3: interconnect@18590000 {
-			compatible = "qcom,sc7280-epss-l3";
+			compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3";
 			reg = <0 0x18590000 0 0x1000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
@@ -5321,7 +5326,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,cpufreq-epss";
+			compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x18591000 0 0x1000>,
 			      <0 0x18592000 0 0x1000>,
 			      <0 0x18593000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index fea7d8273ccd..551768f97729 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -37,7 +37,7 @@
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_EDP_BL";
+		regulator-name = "VBL9";
 		regulator-min-microvolt = <3600000>;
 		regulator-max-microvolt = <3600000>;
 
@@ -50,10 +50,24 @@
 		regulator-boot-on;
 	};
 
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
 	vreg_misc_3p3: regulator-misc-3p3 {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_MISC_3P3";
+		regulator-name = "VCC3B";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
@@ -66,6 +80,38 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -124,6 +170,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c: ldo13 {
@@ -146,6 +194,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4d: ldo4 {
@@ -178,6 +228,63 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
@@ -363,6 +470,13 @@
 	};
 };
 
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &pmc8280c_gpios {
 	edp_bl_pwm: edp-bl-pwm-state {
 		pins = "gpio8";
@@ -370,29 +484,112 @@
 	};
 };
 
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
 	kybd_default: kybd-default-state {
-		disable {
+		disable-pins {
 			pins = "gpio102";
 			function = "gpio";
 			output-low;
 		};
 
-		int-n {
+		int-n-pins {
 			pins = "gpio104";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio105";
 			function = "gpio";
 			bias-disable;
 		};
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	qup0_i2c4_default: qup0-i2c4-default-state {
 		pins = "gpio171", "gpio172";
 		function = "qup4";
@@ -410,7 +607,7 @@
 	};
 
 	tpad_default: tpad-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio182";
 			function = "gpio";
 			bias-disable;
@@ -418,13 +615,13 @@
 	};
 
 	ts0_default: ts0-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio175";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset-n {
+		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
 			output-high;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index b2b744bb8a53..568c6be1ceaa 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -7,6 +7,11 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc8280xp.dtsi"
@@ -26,6 +31,67 @@
 		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
 	};
 
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_n_default>;
+
+		switch-lid {
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
@@ -58,6 +124,54 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -95,7 +209,7 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-boot-on;
-			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
+			regulator-always-on;	/* FIXME: VDD_A_EDP_0_0P9 */
 		};
 	};
 
@@ -145,6 +259,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l7d: ldo7 {
 			regulator-name = "vreg_l7d";
 			regulator-min-microvolt = <3072000>;
@@ -161,14 +282,221 @@
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
 
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
 &pmk8280_pon_pwrkey {
 	status = "okay";
 };
 
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_vadc {
+	status = "okay";
+
+	pmic-die-temp@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	xo-therm@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	sys-therm@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@303 {
+		reg = <PM8350_ADC7_DIE_TEMP(3)>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	sys-therm@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+	};
+
+	pmic-die-temp@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
 &qup0 {
 	status = "okay";
 };
@@ -339,6 +667,13 @@
 	};
 };
 
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &pmc8280c_gpios {
 	edp_bl_pwm: edp-bl-pwm-state {
 		pins = "gpio8";
@@ -346,29 +681,119 @@
 	};
 };
 
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio107";
+		function = "gpio";
+		input-enable;
+		bias-disable;
+	};
+
 	kybd_default: kybd-default-state {
-		disable {
+		disable-pins {
 			pins = "gpio102";
 			function = "gpio";
 			output-low;
 		};
 
-		int-n {
+		int-n-pins {
 			pins = "gpio104";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio105";
 			function = "gpio";
 			bias-disable;
 		};
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	qup0_i2c4_default: qup0-i2c4-default-state {
 		pins = "gpio171", "gpio172";
 		function = "qup4";
@@ -384,7 +809,7 @@
 	};
 
 	tpad_default: tpad-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio182";
 			function = "gpio";
 			bias-disable;
@@ -392,13 +817,13 @@
 	};
 
 	ts0_default: ts0-default-state {
-		int-n {
+		int-n-pins {
 			pins = "gpio175";
 			function = "gpio";
 			bias-disable;
 		};
 
-		reset-n {
+		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
 			output-high;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 24836b6b9bbc..f2c0b71b5d8e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -7,6 +7,50 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8280_1_thermal: pm8280-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8280_2_thermal: pm8280-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmk8280: pmic@0 {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
@@ -24,6 +68,32 @@
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
+
+			pmk8280_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8280_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -33,6 +103,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_1_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -78,6 +155,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_2_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index c32bcded2aef..109c9d2b684d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -38,66 +39,87 @@
 
 		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
 		};
 		opp-499200000 {
 			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
 		};
 		opp-595200000 {
 			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
 		};
 		opp-691200000 {
 			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(672000 * 32)>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-902400000 {
 			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1017600000 {
 			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
 		};
 		opp-1209600000 {
 			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1267200 * 32)>;
 		};
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1363200 * 32)>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1536000 * 32)>;
 		};
 		opp-1670400000 {
 			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1612800 * 32)>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1881600000 {
 			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2112000000 {
 			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2227200000 {
 			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2342400000 {
 			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2438400000 {
 			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 	};
 
@@ -107,66 +129,87 @@
 
 		opp-825600000 {
 			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(768000 * 32)>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
 		};
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
 		};
 		opp-1171200000 {
 			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
 		};
 		opp-1286400000 {
 			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1267200 * 32)>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1363200 * 32)>;
 		};
 		opp-1516800000 {
 			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1459200 * 32)>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1612800 * 32)>;
 		};
 		opp-1747200000 {
 			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1862400000 {
 			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-1977600000 {
 			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2169600000 {
 			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2284800000 {
 			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2496000000 {
 			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2592000000 {
 			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2688000000 {
 			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2803200000 {
 			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2899200000 {
 			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 		opp-2995200000 {
 			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
 		};
 	};
 
@@ -185,6 +228,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -206,6 +250,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -224,6 +269,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -242,6 +288,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -260,6 +307,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -278,6 +326,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -296,6 +345,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -314,6 +364,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -729,11 +780,11 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie2a_phy>,
+				 <&pcie2b_phy>,
+				 <&pcie3a_phy>,
+				 <&pcie3b_phy>,
+				 <&pcie4_phy>,
 				 <0>,
 				 <0>;
 			power-domains = <&rpmhpd SC8280XP_CX>;
@@ -839,12 +890,505 @@
 			status = "disabled";
 		};
 
+		pcie4: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x30000000 0x0 0xf1d>,
+			      <0x0 0x30000f20 0x0 0xa8>,
+			      <0x0 0x30001000 0x0 0x1000>,
+			      <0x0 0x30100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <6>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE4_QX_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf",
+				      "cnoc_qx";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c06000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_CLKREF_CLK>,
+				 <&gcc GCC_PCIE4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3b: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x32000000 0x0 0xf1d>,
+			      <0x0 0x32000f20 0x0 0xa8>,
+			      <0x0 0x32001000 0x0 0x1000>,
+			      <0x0 0x32100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			phys = <&pcie3b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3b_phy: phy@1c0e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3a: pcie@1c10000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x34000000 0x0 0xf1d>,
+			      <0x0 0x34000f20 0x0 0xa8>,
+			      <0x0 0x34001000 0x0 0x1000>,
+			      <0x0 0x34100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <4>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			phys = <&pcie3a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3a_phy: phy@1c14000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c14000 0x0 0x2000>,
+			      <0x0 0x01c16000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 1>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2b: pcie@1c18000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c18000 0x0 0x3000>,
+			      <0x0 0x38000000 0x0 0xf1d>,
+			      <0x0 0x38000f20 0x0 0xa8>,
+			      <0x0 0x38001000 0x0 0x1000>,
+			      <0x0 0x38100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			phys = <&pcie2b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2b_phy: phy@1c1e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c1e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2a: pcie@1c20000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c20000 0x0 0x3000>,
+			      <0x0 0x3c000000 0x0 0xf1d>,
+			      <0x0 0x3c000f20 0x0 0xa8>,
+			      <0x0 0x3c001000 0x0 0x1000>,
+			      <0x0 0x3c100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <2>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			phys = <&pcie2a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2a_phy: phy@1c24000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c24000 0x0 0x2000>,
+			      <0x0 0x01c26000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -855,12 +1399,13 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_UFS_PHY_AHB_CLK>,
 				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
@@ -885,27 +1430,20 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0xe10>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ufs_card_hc: ufs@1da4000 {
@@ -913,7 +1451,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01da4000 0 0x3000>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_card_phy_lanes>;
+			phys = <&ufs_card_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -923,12 +1461,13 @@
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_UFS_CARD_AHB_CLK>,
 				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
@@ -953,28 +1492,20 @@
 
 		ufs_card_phy: phy@1da7000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01da7000 0 0xe10>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
+			reg = <0 0x01da7000 0 0x1000>;
+
 			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			resets = <&ufs_card_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_card_phy_lanes: phy@1da7400 {
-				reg = <0 0x01da7400 0 0x108>,
-				      <0 0x01da7600 0 0x1e0>,
-				      <0 0x01da7c00 0 0x1dc>,
-				      <0 0x01da7800 0 0x108>,
-				      <0 0x01da7a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -983,6 +1514,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sc8280xp-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
 		usb_0_hsphy: phy@88e5000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -1048,70 +1584,52 @@
 			status = "disabled";
 		};
 
-		usb_2_qmpphy0: phy-wrapper@88ef000 {
+		usb_2_qmpphy0: phy@88ef000 {
 			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088ef000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088ef000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
 
 			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
 				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy", "phy_phy";
 
 			power-domains = <&gcc USB30_MP_GDSC>;
 
-			status = "disabled";
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
 
-			usb_2_ssphy0: phy@88efe00 {
-				reg = <0 0x088efe00 0 0x160>,
-				      <0 0x088f0000 0 0x1ec>,
-				      <0 0x088ef200 0 0x1f0>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb2_phy0_pipe_clk";
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		usb_2_qmpphy1: phy-wrapper@88f1000 {
+		usb_2_qmpphy1: phy@88f1000 {
 			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088f1000 0 0x1c8>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088f1000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
 
 			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
 				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy", "phy_phy";
 
 			power-domains = <&gcc USB30_MP_GDSC>;
 
-			status = "disabled";
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
 
-			usb_2_ssphy1: phy@88f1e00 {
-				reg = <0 0x088f1e00 0 0x160>,
-				      <0 0x088f2000 0 0x1ec>,
-				      <0 0x088f1200 0 0x1f0>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb2_phy1_pipe_clk";
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		remoteproc_adsp: remoteproc@3000000 {
@@ -1181,26 +1699,16 @@
 			usb_0_ssphy: usb3-phy@88eb400 {
 				reg = <0 0x088eb400 0 0x100>,
 				      <0 0x088eb600 0 0x3ec>,
-				      <0 0x088ec400 0 0x1f0>,
+				      <0 0x088ec400 0 0x364>,
 				      <0 0x088eba00 0 0x100>,
 				      <0 0x088ebc00 0 0x3ec>,
-				      <0 0x088ec700 0 0x64>;
+				      <0 0x088ec200 0 0x18>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
 				clock-output-names = "usb0_phy_pipe_clk_src";
 			};
-
-			usb_0_dpphy: dp-phy@88ed200 {
-				reg = <0 0x088ed200 0 0x200>,
-				      <0 0x088ed400 0 0x200>,
-				      <0 0x088eda00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		usb_1_hsphy: phy@8902000 {
@@ -1242,8 +1750,8 @@
 
 			usb_1_ssphy: usb3-phy@8903400 {
 				reg = <0 0x08903400 0 0x100>,
-				      <0 0x08903c00 0 0x3ec>,
-				      <0 0x08904400 0 0x1f0>,
+				      <0 0x08903600 0 0x3ec>,
+				      <0 0x08904400 0 0x364>,
 				      <0 0x08903a00 0 0x100>,
 				      <0 0x08903c00 0 0x3ec>,
 				      <0 0x08904200 0 0x18>;
@@ -1253,15 +1761,96 @@
 				clock-names = "pipe0";
 				clock-output-names = "usb1_phy_pipe_clk_src";
 			};
+		};
 
-			usb_1_dpphy: dp-phy@8904200 {
-				reg = <0 0x08904200 0 0x200>,
-				      <0 0x08904400 0 0x200>,
-				      <0 0x08904a00 0 0x200>,
-				      <0 0x08904600 0 0x200>,
-				      <0 0x08904800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
+		pmu@9091000 {
+			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x9091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <2597000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <3879000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <5161000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <5931000>;
+				};
+				opp-8 {
+					opp-peak-kBps = <6515000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <7980000>;
+				};
+				opp-10 {
+					opp-peak-kBps = <8136000>;
+				};
+				opp-11 {
+					opp-peak-kBps = <10437000>;
+				};
+				opp-12 {
+					opp-peak-kBps = <12191000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,msm8998-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <15258001>;
+				};
 			};
 		};
 
@@ -1476,6 +2065,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c440000 0 0x1100>,
@@ -1806,6 +2400,16 @@
 			};
 		};
 
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x18591000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 28050bc5f081..7c81918eee66 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -99,7 +99,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "qcom/ifc6560/adsp.mbn";
+	firmware-name = "qcom/sda660/adsp.mbn";
 };
 
 &blsp_i2c6 {
@@ -231,7 +231,7 @@
 };
 
 &rpm_requests {
-	pm660-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -313,7 +313,7 @@
 		};
 	};
 
-	pm660l-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -401,16 +401,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
@@ -436,7 +438,7 @@
 
 	cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 09c07800793a..3d2b08d551d0 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -155,7 +155,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "adsp.mdt";
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
 };
 
 &blsp_i2c1 {
@@ -260,7 +260,7 @@
 };
 
 &rpm_requests {
-	pm660l-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -394,7 +394,7 @@
 		};
 	};
 
-	pm660-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -577,16 +577,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
@@ -615,33 +617,35 @@
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio45";
+		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	ts_lcd_id_active: ts-lcd-id-active {
+	ts_lcd_id_active: ts-lcd-id-active-state {
 		pins = "gpio56";
+		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	imx300_vana_default: imx300-vana-default {
+	imx300_vana_default: imx300-vana-default-state {
 		pins = "gpio50";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	imx219_vana_default: imx219-vana-default {
+	imx219_vana_default: imx219-vana-default-state {
 		pins = "gpio51";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cam_vdig_default: cam-vdig-default {
+	cam_vdig_default: cam-vdig-default-state {
 		pins = "gpio52";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index b51b85f583e5..13e6a4fbba27 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -721,33 +721,36 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			blsp1_uart1_default: blsp1-uart1-default {
+			blsp1_uart1_default: blsp1-uart1-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_uart1_sleep: blsp1-uart1-sleep {
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_uart2_default: blsp1-uart2-default {
+			blsp1_uart2_default: blsp1-uart2-default-state {
 				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_uart1_default: blsp2-uart1-active {
-				tx-rts {
+			blsp2_uart1_default: blsp2-uart1-active-state {
+				tx-rts-pins {
 					pins = "gpio16", "gpio19";
 					function = "blsp_uart5";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx {
+				rx-pins {
 					/*
 					 * Avoid garbage data while BT module
 					 * is powered off or not driving signal
@@ -758,7 +761,7 @@
 					bias-pull-up;
 				};
 
-				cts {
+				cts-pins {
 					/* Match the pull of the BT module */
 					pins = "gpio18";
 					function = "blsp_uart5";
@@ -767,244 +770,232 @@
 				};
 			};
 
-			blsp2_uart1_sleep: blsp2-uart1-sleep {
-				tx {
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				tx-pins {
 					pins = "gpio16";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				rx-cts-rts {
+				rx-cts-rts-pins {
 					pins = "gpio17", "gpio18", "gpio19";
 					function = "gpio";
 					drive-strength = <2>;
-					bias-no-pull;
+					bias-disable;
 				};
 			};
 
-			i2c1_default: i2c1-default {
+			i2c1_default: i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c1_sleep: i2c1-sleep {
+			i2c1_sleep: i2c1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c2_default: i2c2-default {
+			i2c2_default: i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c2_sleep: i2c2-sleep {
+			i2c2_sleep: i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c3_default: i2c3-default {
+			i2c3_default: i2c3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c3_sleep: i2c3-sleep {
+			i2c3_sleep: i2c3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c4_default: i2c4-default {
+			i2c4_default: i2c4-default-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c4_sleep: i2c4-sleep {
+			i2c4_sleep: i2c4-sleep-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c5_default: i2c5-default {
+			i2c5_default: i2c5-default-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c5_sleep: i2c5-sleep {
+			i2c5_sleep: i2c5-sleep-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c6_default: i2c6-default {
+			i2c6_default: i2c6-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c6_sleep: i2c6-sleep {
+			i2c6_sleep: i2c6-sleep-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c7_default: i2c7-default {
+			i2c7_default: i2c7-default-state {
 				pins = "gpio26", "gpio27";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c7_sleep: i2c7-sleep {
+			i2c7_sleep: i2c7-sleep-state {
 				pins = "gpio26", "gpio27";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c8_default: i2c8-default {
+			i2c8_default: i2c8-default-state {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c8_sleep: i2c8-sleep {
+			i2c8_sleep: i2c8-sleep-state {
 				pins = "gpio30", "gpio31";
-				function = "blsp_i2c8";
+				function = "blsp_i2c8_a";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			cci0_default: cci0_default {
-				pinmux {
-					pins = "gpio36","gpio37";
-					function = "cci_i2c";
-				};
-
-				pinconf {
-					pins = "gpio36","gpio37";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
+			cci0_default: cci0-default-state {
+				pins = "gpio36","gpio37";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
 			};
 
-			cci1_default: cci1_default {
-				pinmux {
-					pins = "gpio38","gpio39";
-					function = "cci_i2c";
-				};
-
-				pinconf {
-					pins = "gpio38","gpio39";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
+			cci1_default: cci1-default-state {
+				pins = "gpio38","gpio39";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
 			};
 
-			sdc1_state_on: sdc1-on {
-				clk {
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc1_state_off: sdc1-off {
-				clk {
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
 					pins = "sdc1_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc1_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc1_data";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				rclk {
+				rclk-pins {
 					pins = "sdc1_rclk";
 					bias-pull-down;
 				};
 			};
 
-			sdc2_state_on: sdc2-on {
-				clk {
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <16>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <10>;
 				};
 			};
 
-			sdc2_state_off: sdc2-off {
-				clk {
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					bias-disable;
 					drive-strength = <2>;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					bias-pull-up;
 					drive-strength = <2>;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					bias-pull-up;
 					drive-strength = <2>;
@@ -1616,7 +1607,6 @@
 					      "core";
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -1639,7 +1629,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@c994400 {
+			dsi0_phy: phy@c994400 {
 				compatible = "qcom,dsi-phy-14nm-660";
 				reg = <0x0c994400 0x100>,
 				      <0x0c994500 0x300>,
@@ -2224,12 +2214,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					q6core {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 					};
 
-					q6afe: apr-service@4 {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						q6afedai: dais {
@@ -2240,7 +2230,7 @@
 						};
 					};
 
-					q6asm: apr-service@7 {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
@@ -2252,7 +2242,7 @@
 						};
 					};
 
-					q6adm: apr-service@8 {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						q6routing: routing {
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 891e314bc782..3fb513cad0a9 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -49,6 +49,20 @@
 	vdda-phy-dpdm-supply = <&pm8953_l13>;
 };
 
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "himax,hx83112b";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -69,7 +83,7 @@
 };
 
 &rpm_requests {
-	pm8953-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8953-regulators";
 
 		vdd_l1-supply = <&pm8953_s3>;
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
index 58f687fc49e0..9702e5f59a1d 100644
--- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -19,7 +19,7 @@
 };
 
 &sdc2_state_on {
-	clk {
+	clk-pins {
 		drive-strength = <14>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index a3559f6e34a5..8fb2d1788742 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -111,7 +111,7 @@
 };
 
 &rpm_requests {
-	pm660l-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm660l-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -206,7 +206,7 @@
 		};
 	};
 
-	pm660-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm660-regulators";
 
 		vdd_s1-supply = <&vph_pwr>;
@@ -372,16 +372,18 @@
 };
 
 &sdc2_state_on {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
 	};
 };
 
 &sdc2_state_off {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio54";
+		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index 43220af1b685..d52123cb5cd3 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -190,7 +190,6 @@
 					"core";
 
 		phys = <&dsi1_phy>;
-		phy-names = "dsi";
 
 		status = "disabled";
 
@@ -213,7 +212,7 @@
 		};
 	};
 
-	dsi1_phy: dsi-phy@c996400 {
+	dsi1_phy: phy@c996400 {
 		compatible = "qcom,dsi-phy-14nm-660";
 		reg = <0x0c996400 0x100>,
 				<0x0c996500 0x300>,
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
new file mode 100644
index 000000000000..cf2ae540db12
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
+ * xiaomi-lavender device tree, and oneplus-common device tree.
+ *
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include "sdm670.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	model = "Google Pixel 3a";
+	compatible = "google,sargo", "qcom,sdm670";
+
+	aliases { };
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+			width = <1080>;
+			height = <2220>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x9800000>;
+			no-map;
+		};
+
+		venus_mem: venus@94800000 {
+			reg = <0 0x94800000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@94d00000 {
+			reg = <0 0x94d00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@94e00000 {
+			reg = <0 0x94e00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@95600000 {
+			reg = <0 0x95600000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@95800000 {
+			reg = <0 0x95800000 0 0x2200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@97a00000 {
+			reg = <0 0x97a00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@97a10000 {
+			reg = <0 0x97a10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@97a15000 {
+			reg = <0 0x97a15000 0 0x2000>;
+			no-map;
+		};
+
+		framebuffer-region@9c000000 {
+			reg = <0 0x9c000000 0 0x2400000>;
+			no-map;
+		};
+
+		/* Also includes ramoops regions */
+		debug_info_mem: debug-info@a1800000 {
+			reg = <0 0xa1800000 0 0x411000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3312000>;
+		regulator-max-microvolt = <3312000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * Supply map from xiaomi-lavender specifies this as the supply for
+	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
+	 * this as a power domain. Set this as a fixed regulator with the same
+	 * voltage as lavender until display is needed to avoid unneccessarily
+	 * using a deprecated binding (regulator-fixed-domain).
+	 */
+	vreg_s2b_1p05: vreg-s2b-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s2b";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm660-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
+		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
+		vdd-l5-supply = <&vreg_s2b_1p05>;
+		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
+		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: smps4 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: smps6 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: ldo6 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: ldo7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l17a_1p8: ldo17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: ldo19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm660l-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
+		vdd-l4-l6-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		/* LDOs */
+		vreg_l1b_0p925: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2b_2p95: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3b_3p0: ldo3 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l4b_2p95: ldo4 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5b_2p95: ldo5 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6b_3p3: ldo6 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7b_3p125: ldo7 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: ldo8 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/*
+		 * Downstream specifies a fixed voltage of 3.312 V, but the
+		 * PMIC4 BOB ranges don't support that. Widen the range a
+		 * little to avoid adding a new BOB regulator type.
+		 */
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <127>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&pm660l_gpios {
+	vol_up_pin: vol-up-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	supports-cqe;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-ddr-1_8v;
+
+	qcom,ddr-config = <0xc3040873>;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchscreen_default: ts-default-state {
+		ts-reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+
+		ts-irq-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		ts-switch-pins {
+			pins = "gpio135";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Only peripheral works for now */
+	dr_mode = "peripheral";
+
+	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+	maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
new file mode 100644
index 000000000000..47363fde64ac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -0,0 +1,1160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM670 SoC device tree source, adapted from SDM845 SoC device tree
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases { };
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <1617>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <2380>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9825>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm670", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8ab00000 {
+			reg = <0 0x8ab00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: venus@92e00000 {
+			reg = <0 0x92e00000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@93300000 {
+			reg = <0 0x93300000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@93400000 {
+			reg = <0 0x93400000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@93c00000 {
+			reg = <0 0x93c00000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@93e00000 {
+			reg = <0 0x93e00000 0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@95c00000 {
+			reg = <0 0x95c00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@95c10000 {
+			reg = <0 0x95c10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@95c15000 {
+			reg = <0 0x95c15000 0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@9e400000 {
+			reg = <0 0x9e400000 0 0x1400000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm670";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>,
+			      <0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+			clock-names = "iface", "core", "xo", "ice", "bus";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmhpd SDM670_CX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x6d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm670-tlmm";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm670-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm670-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm670-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index b5eb8f7eca1d..ca676e04687b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -16,7 +16,7 @@
 / {
 	aliases {
 		bluetooth0 = &bluetooth;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 		serial0 = &uart9;
 		wifi0 = &wifi;
 	};
@@ -860,6 +860,8 @@ ap_ts_i2c: &i2c14 {
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth: wcn3990-bt {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&src_pp1800_s4a>;
@@ -1079,41 +1081,6 @@ ap_ts_i2c: &i2c14 {
 	};
 };
 
-&qup_uart6_default {
-	/* Change pinmux to all 4 pins since CTS and RTS are connected */
-	pinmux {
-		pins = "gpio45", "gpio46",
-		       "gpio47", "gpio48";
-	};
-
-	pinconf-cts {
-		/*
-		 * Configure a pull-down on 45 (CTS) to match the pull of
-		 * the Bluetooth module.
-		 */
-		pins = "gpio45";
-		bias-pull-down;
-	};
-
-	pinconf-rts-tx {
-		/* We'll drive 46 (RTS) and 47 (TX), so no pull */
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pinconf-rx {
-		/*
-		 * Configure a pull-up on 48 (RX). This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module is
-		 * in tri-state (module powered off or not driving the
-		 * signal yet).
-		 */
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &qup_uart9_default {
 	pinconf-tx {
 		pins = "gpio4";
@@ -1341,7 +1308,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	pen_rst_l: pen-rst-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio23";
 			function = "gpio";
 		};
@@ -1408,7 +1375,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	ts_int_l: ts-int-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio125";
 			function = "gpio";
 		};
@@ -1420,7 +1387,7 @@ ap_ts_i2c: &i2c14 {
 	};
 
 	ts_reset_l: ts-reset-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio118";
 			function = "gpio";
 		};
@@ -1436,7 +1403,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1446,7 +1413,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
new file mode 100644
index 000000000000..a21caa6f3fa2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "sdm845-db845c.dts"
+
+&camss {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera@10 {
+		compatible = "ovti,ov8856";
+		reg = <0x10>;
+
+		/* CAM0_RST_N */
+		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		clock-names = "xvclk";
+		clock-frequency = <19200000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace is powered on as a,
+		 * so it is represented by a fixed regulator.
+		 *
+		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
+		 * both have to be enabled through the power management
+		 * gpios.
+		 */
+		dovdd-supply = <&vreg_lvs1a_1p8>;
+		avdd-supply = <&cam0_avdd_2v8>;
+		dvdd-supply = <&cam0_dvdd_1v2>;
+
+		port {
+			ov8856_ep: endpoint {
+				link-frequencies = /bits/ 64
+					<360000000 180000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&cci_i2c1 {
+	camera@60 {
+		compatible = "ovti,ov7251";
+
+		/* I2C address as per ov7251.txt linux documentation */
+		reg = <0x60>;
+
+		/* CAM3_RST_N */
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam3_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace always powered on.
+		 *
+		 * The 2.8V vdda-supply regulator is enabled when the
+		 * vreg_s4a_1p8 trace is pulled high.
+		 * It too is represented by a fixed regulator.
+		 *
+		 * No 1.2V vddd-supply regulator is used.
+		 */
+		vdddo-supply = <&vreg_lvs1a_1p8>;
+		vdda-supply = <&cam3_avdd_2v8>;
+
+		status = "disabled";
+
+		port {
+			ov7251_ep: endpoint {
+				data-lanes = <0 1>;
+/*				remote-endpoint = <&csiphy3_ep>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 132417e2d11e..f41c6d600ea8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -22,7 +22,7 @@
 
 	aliases {
 		serial0 = &uart9;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -120,9 +120,11 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	pcie0_1p05v: pcie-0-1p05v-regulator {
@@ -133,9 +135,11 @@
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
@@ -195,9 +199,11 @@
 		regulator-min-microvolt = <500000>;
 		regulator-max-microvolt = <500000>;
 
-		// TODO: make it possible to drive same GPIO from two clients
-		// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		// enable-active-high;
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
 	};
 
 	vbat: vbat-regulator {
@@ -649,9 +655,13 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
 &q6afedai {
-	qi2s@22 {
+	dai@22 {
 		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0 1 2 3>;
 	};
@@ -986,6 +996,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -1076,7 +1088,7 @@
 	status = "okay";
 };
 
-&wcd9340{
+&wcd9340 {
 	pinctrl-0 = <&wcd_intr_default>;
 	pinctrl-names = "default";
 	clock-names = "extclk";
@@ -1089,7 +1101,7 @@
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -1098,7 +1110,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,2 {
 			compatible = "sdw10217201000";
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			reg = <0 2>;
@@ -1123,10 +1135,13 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
-&qup_uart3_default{
+&qup_uart3_default {
 	pinmux {
 		pins = "gpio41", "gpio42", "gpio43", "gpio44";
 		function = "qup3";
@@ -1141,29 +1156,6 @@
 	};
 };
 
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &qup_uart9_default {
 	pinconf-tx {
 		pins = "gpio4";
@@ -1182,105 +1174,6 @@
 
 };
 
-&cci {
-	status = "okay";
-};
-
-&camss {
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-
-	status = "ok";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			csiphy0_ep: endpoint {
-				data-lanes = <0 1 2 3>;
-				remote-endpoint = <&ov8856_ep>;
-			};
-		};
-	};
-};
-
-&cci_i2c0 {
-	camera@10 {
-		compatible = "ovti,ov8856";
-		reg = <0x10>;
-
-		// CAM0_RST_N
-		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
-		clock-names = "xvclk";
-		clock-frequency = <19200000>;
-
-		/* The &vreg_s4a_1p8 trace is powered on as a,
-		 * so it is represented by a fixed regulator.
-		 *
-		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
-		 * both have to be enabled through the power management
-		 * gpios.
-		 */
-		dovdd-supply = <&vreg_lvs1a_1p8>;
-		avdd-supply = <&cam0_avdd_2v8>;
-		dvdd-supply = <&cam0_dvdd_1v2>;
-
-		status = "ok";
-
-		port {
-			ov8856_ep: endpoint {
-				link-frequencies = /bits/ 64
-					<360000000 180000000>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csiphy0_ep>;
-			};
-		};
-	};
-};
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		// I2C address as per ov7251.txt linux documentation
-		reg = <0x60>;
-
-		// CAM3_RST_N
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/* The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disable";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-//				remote-endpoint = <&csiphy3_ep>;
-			};
-		};
-	};
-};
-
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi0_default {
 	config {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 20f275f8694d..1eb423e4be24 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -604,7 +604,7 @@
 };
 
 &pm8998_gpio {
-	vol_up_pin_a: vol-up-active-pins {
+	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
 		input-enable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 392461c29e76..42cf4dd5ea28 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -19,7 +19,7 @@
 / {
 	aliases {
 		serial0 = &uart9;
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -50,7 +50,8 @@
 	};
 
 	reserved-memory {
-		/* The rmtfs_mem needs to be guarded due to "XPU limitations"
+		/*
+		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
 		 * it is otherwise possible for an allocation adjacent to the
 		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
 		 */
@@ -433,7 +434,7 @@
 	status = "okay";
 };
 
-/* Modem/wifi*/
+/* Modem/wifi */
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
@@ -461,6 +462,10 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -500,35 +505,11 @@
 	};
 };
 
-/*
- * Prevent garbage data on bluetooth UART lines
- */
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-pull-down;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
-
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
new file mode 100644
index 000000000000..e742c27fe91f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/ {
+	chassis-type = "handset";
+	model = "Samsung Galaxy S9 SM-G9600";
+	compatible = "samsung,starqltechn", "qcom,sdm845";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		framebuffer: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x02400000>;
+			no-map;
+		};
+
+		memory@a1300000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa1300000 0x0 0x100000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+		};
+	};
+};
+
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+
+	sdc2_clk_state: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd_state: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data_state: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n_state: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 83261c9bb4f2..bb77ccfdc68c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -23,6 +23,7 @@
 	aliases {
 		display0 = &framebuffer0;
 		serial0 = &uart9;
+		serial1 = &uart6;
 	};
 
 	chosen {
@@ -693,9 +694,17 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "axolotl/crnv21.bin";
+
 		vddio-supply = <&vreg_s4a_1p8>;
 		vddxo-supply = <&vreg_l7a_1p8>;
 		vddrf-supply = <&vreg_l17a_1p3>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 51ee42e3c995..87dd0fc36747 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -376,7 +376,7 @@
 	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 0f470cf1ed1c..eb6b2b676eca 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -26,8 +26,6 @@
 /delete-node/ &rmtfs_mem;
 
 / {
-	model = "Xiaomi Pocophone F1";
-	compatible = "xiaomi,beryllium", "qcom,sdm845";
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
@@ -35,7 +33,7 @@
 	qcom,msm-id = <321 0x20001>;
 
 	aliases {
-		hsuart0 = &uart6;
+		serial1 = &uart6;
 	};
 
 	gpio-keys {
@@ -221,8 +219,7 @@
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
 
-	panel@0 {
-		compatible = "tianma,fhd-video";
+	display_panel: panel@0 {
 		reg = <0>;
 		vddio-supply = <&vreg_l14a_1p8>;
 		vddpos-supply = <&lab>;
@@ -234,8 +231,10 @@
 		backlight = <&pmi8998_wled>;
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 
+		status = "disabled";
+
 		port {
-			tianma_nt36672a_in_0: endpoint {
+			panel_in_0: endpoint {
 				remote-endpoint = <&dsi0_out>;
 			};
 		};
@@ -243,7 +242,7 @@
 };
 
 &dsi0_out {
-	remote-endpoint = <&tianma_nt36672a_in_0>;
+	remote-endpoint = <&panel_in_0>;
 	data-lanes = <0 1 2 3>;
 };
 
@@ -336,9 +335,13 @@
 	};
 };
 
+&pmi8998_rradc {
+	status = "okay";
+};
+
 /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
 &q6afedai {
-	qi2s@22 {
+	dai@22 {
 		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
@@ -481,6 +484,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -567,28 +572,3 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 };
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qup_uart6_default {
-	pinmux {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
new file mode 100644
index 000000000000..76931ebad065
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (EBBG)";
+	compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "ebbg,ft8719";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
new file mode 100644
index 000000000000..8e176111e599
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (Tianma)";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "tianma,fhd-video";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index afc17e4d403f..38ba809a95cd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -456,9 +456,6 @@
 
 &i2c14 {
 	clock-frequency = <400000>;
-	dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
-		   <&gpi_dma1 1 6 QCOM_GPI_I2C>;
-	dma-names = "tx", "rx";
 	status = "okay";
 
 	touchscreen@20 {
@@ -544,8 +541,8 @@
 };
 
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <0>;
 	};
 };
@@ -628,7 +625,7 @@
 	};
 
 	wcd_intr_default: wcd-intr-default {
-		pins = "goui54";
+		pins = "gpio54";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
@@ -639,6 +636,8 @@
 &uart6 {
 	status = "okay";
 
+	pinctrl-0 = <&qup_uart6_4pin>;
+
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
@@ -735,28 +734,3 @@
 	qcom,snoc-host-cap-skip-quirk;
 	status = "okay";
 };
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qup_uart6_default {
-	pinmux {
-		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		 function = "qup6";
-	};
-
-	cts {
-		pins = "gpio45";
-		bias-disable;
-	};
-
-	rts-tx {
-		pins = "gpio46", "gpio47";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx {
-		pins = "gpio48";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d761da47220d..65032b94b46d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -767,13 +767,13 @@
 				#size-cells = <0>;
 				qcom,intents = <512 20>;
 
-				apr-service@3 {
+				service@3 {
 					reg = <APR_SVC_ADSP_CORE>;
 					compatible = "qcom,q6core";
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
 				};
 
-				q6afe: apr-service@4 {
+				q6afe: service@4 {
 					compatible = "qcom,q6afe";
 					reg = <APR_SVC_AFE>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -785,7 +785,7 @@
 					};
 				};
 
-				q6asm: apr-service@7 {
+				q6asm: service@7 {
 					compatible = "qcom,q6asm";
 					reg = <APR_SVC_ASM>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -798,7 +798,7 @@
 					};
 				};
 
-				q6adm: apr-service@8 {
+				q6adm: service@8 {
 					compatible = "qcom,q6adm";
 					reg = <APR_SVC_ADM>;
 					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -3008,6 +3008,28 @@
 				};
 			};
 
+			qup_uart6_4pin: qup-uart6-4pin-state {
+
+				cts-pins {
+					pins = "gpio45";
+					function = "qup6";
+					bias-pull-down;
+				};
+
+				rts-tx-pins {
+					pins = "gpio46", "gpio47";
+					function = "qup6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+					bias-pull-up;
+				};
+			};
+
 			qup_uart7_default: qup-uart7-default {
 				pinmux {
 					pins = "gpio95", "gpio96";
@@ -3823,33 +3845,29 @@
 			status = "disabled";
 		};
 
-		slim: slim@171c0000 {
+		slim: slim-ngd@171c0000 {
 			compatible = "qcom,slim-ngd-v2.1.0";
 			reg = <0 0x171c0000 0 0x2c000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 
-			qcom,apps-ch-pipes = <0x780000>;
-			qcom,ea-pc = <0x270>;
-			status = "okay";
-			dmas = <&slimbam 3>, <&slimbam 4>,
-				<&slimbam 5>, <&slimbam 6>;
-			dma-names = "rx", "tx", "tx2", "rx2";
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
 
 			iommus = <&apps_smmu 0x1806 0x0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ngd@1 {
+			slim@1 {
 				reg = <1>;
 				#address-cells = <2>;
 				#size-cells = <0>;
 
-				wcd9340_ifd: ifd@0{
+				wcd9340_ifd: ifd@0,0 {
 					compatible = "slim217,250";
 					reg = <0 0>;
 				};
 
-				wcd9340: codec@1{
+				wcd9340: codec@1,0 {
 					compatible = "slim217,250";
 					reg = <1 0>;
 					slim-ifc-dev = <&wcd9340_ifd>;
@@ -3959,9 +3977,10 @@
 		};
 
 		usb_1_qmpphy: phy@88e9000 {
-			compatible = "qcom,sdm845-qmp-usb3-phy";
+			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
 			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -3973,11 +3992,11 @@
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
+			usb_1_ssphy: usb3-phy@88e9200 {
 				reg = <0 0x088e9200 0 0x128>,
 				      <0 0x088e9400 0 0x200>,
 				      <0 0x088e9c00 0 0x218>,
@@ -3990,6 +4009,16 @@
 				clock-names = "pipe0";
 				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4339,6 +4368,22 @@
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
 			};
 		};
 
@@ -4483,13 +4528,20 @@
 
 					port@0 {
 						reg = <0>;
-						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
 						dpu_intf2_out: endpoint {
 							remote-endpoint = <&dsi1_in>;
 						};
@@ -4521,6 +4573,77 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				status = "disabled";
+				compatible = "qcom,sdm845-dp";
+
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae90a00 0 0x600>,
+				      <0 0xae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: dp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			dsi0: dsi@ae94000 {
 				compatible = "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -4548,7 +4671,6 @@
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -4574,7 +4696,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@ae94400 {
+			dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -4620,7 +4742,6 @@
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -4646,7 +4767,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@ae96400 {
+			dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -4812,8 +4933,8 @@
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
@@ -5197,7 +5318,7 @@
 		};
 
 		osm_l3: interconnect@17d41000 {
-			compatible = "qcom,sdm845-osm-l3";
+			compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
 			reg = <0 0x17d41000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index be59a8ba9c1f..f32b7445f7c9 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -487,8 +487,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -783,7 +785,7 @@
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -792,7 +794,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
 			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index f954fe5cb61a..daca1e0ad62a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -43,7 +43,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		// Firmware initialized the display at 1280p instead of 1440p
+		/* Firmware initialized the display at 1280p instead of 1440p */
 		framebuffer0: framebuffer@80400000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
@@ -124,7 +124,7 @@
 };
 
 &adsp_pas {
-	firmware-name = "qcom/samsung/w737/qcadsp850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn";
 	status = "okay";
 };
 
@@ -336,7 +336,7 @@
 };
 
 &cdsp_pas {
-	firmware-name = "qcom/samsung/w737/qccdsp850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn";
 	status = "okay";
 };
 
@@ -385,7 +385,7 @@
 &ipa {
 	status = "okay";
 	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/samsung/w737/ipa_fws.elf";
+	firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf";
 };
 
 /* No idea why it causes an SError when enabled */
@@ -395,7 +395,7 @@
 
 &mss_pil {
 	status = "okay";
-	firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn";
 };
 
 &qup_i2c10_default {
@@ -415,8 +415,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -574,7 +576,7 @@
 	};
 
 	pen_rst_l: pen-rst-l {
-		pinmux  {
+		pinmux {
 			pins = "gpio21";
 			function = "gpio";
 		};
@@ -696,7 +698,7 @@
 
 &venus {
 	status = "okay";
-	firmware-name = "qcom/samsung/w737/qcvss850.mbn";
+	firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn";
 };
 
 &wcd9340{
@@ -715,7 +717,7 @@
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
 	swm: swm@c85 {
-		left_spkr: wsa8810-left{
+		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
 			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -724,7 +726,7 @@
 			#sound-dai-cells = <0>;
 		};
 
-		right_spkr: wsa8810-right{
+		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
 			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..a3f1c7c41fd7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&reserved_memory {
+	bootloader_log_mem: memory@5fff7000 {
+		reg = <0x0 0x5fff7000 0x0 0x8000>;
+		no-map;
+	};
+
+	ramoops@cbe00000 {
+		compatible = "ramoops";
+		reg = <0x0 0xcbe00000 0x0 0x400000>;
+		record-size = <0x40000>;
+		pmsg-size = <0x200000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x40000>;
+	};
+
+	param_mem: memory@cc200000 {
+		reg = <0x0 0xcc200000 0x0 0x100000>;
+		no-map;
+	};
+
+	mtp_mem: memory@cc300000 {
+		reg = <0x00 0xcc300000 0x00 0xb00000>;
+		no-map;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
new file mode 100644
index 000000000000..c5add8f44fc0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 000000000000..572bf04adf90
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,1425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6115";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6115-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_min_svs: opp1 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp5 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp7 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 121>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x01400000 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x01b40000 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		rng: rng@1b53000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x01b53000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4410000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x04411000 0x1ff>, /* TM */
+			      <0x04410000 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x04690000 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x04807000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x4807400 0x098>,
+				      <0x4807600 0x130>,
+				      <0x4807c00 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x04a00000 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels =  <10>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6115-mdss";
+			reg = <0x05e00000 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6115-dpu";
+				reg = <0x05e01000 0x8f000>,
+				      <0x05eb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "rot",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			dsi0: dsi@5e94000 {
+				compatible = "qcom,dsi-ctrl-6g-qcm2290";
+				reg = <0x05e94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				phys = <&dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x05e94400 0x100>,
+				      <0x05e94500 0x300>,
+				      <0x05e94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6115-dispcc";
+			reg = <0x05f00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0c600000 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0c800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0f120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@f123000 {
+				reg = <0x0f123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				reg = <0x0f124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				reg = <0x0f125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				reg = <0x0f126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				reg = <0x0f127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				reg = <0x0f128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc4385..0de6c5b7f742 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -6,9 +6,10 @@
 /dts-v1/;
 
 #include "sm6125.dtsi"
+#include "pm6125.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 #include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	/* required for bootloader to select correct board */
@@ -80,15 +81,175 @@
 			no-map;
 		};
 	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rf-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
 
 &hsusb_phy1 {
 	status = "okay";
 };
 
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
+
+	rf-pa0-therm@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	quiet-therm@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	camera-flash-therm@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	emmc-ufs-therm@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+
+	rf-pa1-therm@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rf-pa1-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpio {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	rf_pa1_therm: rf-pa1-therm-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
 &sdc2_off_state {
 	sd-cd-pins {
 		pins = "gpio98";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
@@ -97,6 +258,7 @@
 &sdc2_on_state {
 	sd-cd-pins {
 		pins = "gpio98";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 1fe3fa3ad877..7e25a4f85594 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -407,13 +407,13 @@
 			};
 
 			sdc2_on_state: sdc2-on-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				cmd-pins-pins {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
@@ -458,7 +458,7 @@
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
-			reg-names = "hc", "core";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -476,6 +476,8 @@
 
 			bus-width = <8>;
 			non-removable;
+			supports-cqe;
+
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 36911b9a5c04..94f77d376662 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -4,7 +4,10 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm6350.dtsi"
+#include "pm6350.dtsi"
 
 / {
 	model = "Sony Xperia 10 III";
@@ -28,16 +31,348 @@
 			clocks = <&gcc GCC_DISP_AXI_CLK>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_state>;
+
+		key-volume-down {
+			label = "volume_down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	touch_en_vreg: touch-en-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_en_vreg";
+		gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&pm6350_l6>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		pm6350_s1: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_s2: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l2: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l3: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l4: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l5: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l6: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l7: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l8: ldo8 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l9: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l11: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l12: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l13: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l14: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l15: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l16: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l18: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l19: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l20: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l21: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l22: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm6150l_s8: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l1: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l2: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l3: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l4: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l5: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l6: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		pm6150l_l7: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l9: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		pm6150l_l10: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l11: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		vdd-supply = <&pm6350_l11>;
+		avdd-supply = <&touch_en_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_active>;
+	};
+};
+
+&pm6350_gpios {
+	gpio_keys_state: gpio-keys-state {
+		key-volume-down-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <0>;
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &sdhc_2 {
 	status = "okay";
 
+	vmmc-supply = <&pm6150l_l9>;
+	vqmmc-supply = <&pm6150l_l6>;
+
 	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
 };
 
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
+
+	ts_active: ts-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
 };
 
 &usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index c39de7d3ace0..43324bf291c3 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -485,11 +485,13 @@
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd SM6350_CX>;
@@ -1063,15 +1065,21 @@
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
 			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd SM6350_CX>;
@@ -1148,15 +1156,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -1314,6 +1318,46 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
 			qup_uart9_default: qup-uart9-default-state {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
new file mode 100644
index 000000000000..b691c3834b6b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pm6125.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/* PM6125 PON is used and we can't have duplicate labels */
+/delete-node/ &pmk8350_pon;
+
+/ {
+	model = "Sony Xperia 10 IV";
+	compatible = "sony,pdx225", "qcom,sm6375";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@85200000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x85200000 0 0xc00000>;
+
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@85200000 {
+			reg = <0 0x85200000 0 0xc00000>;
+			no-map;
+		};
+
+		ramoops@ffc40000 {
+			compatible = "ramoops";
+			reg = <0 0xffc40000 0 0xb0000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+
+		vdd-supply = <&pm6125_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/Sony/murray/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/Sony/murray/cdsp.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s5: s5 {
+			regulator-min-microvolt = <382000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1374000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1574000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		/*
+		 * S8 is VDD_GFX
+		 * L1 is VDD_LPI_CX
+		 */
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		/* L17 is VDD_LPI_MX */
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <920000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmr735a-regulators";
+
+		/*
+		 * S1 is VDD_MX
+		 * S2 is VDD_CX
+		 */
+
+		pmr735a_l1: l1 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+		};
+
+		pmr735a_l2: l2 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <796000>;
+		};
+
+		pmr735a_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: l4 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pmr735a_l5: l5 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		pmr735a_l6: l6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <868000>;
+		};
+
+		pmr735a_l7: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>;
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_avdd_default: ts-avdd-default-state {
+		pins = "gpio59";
+		function = "gpio";
+		drive-strength = <8>;
+		output-high;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
new file mode 100644
index 000000000000..12cf5dbe5bd6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -0,0 +1,1396 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-collapse";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sm6375", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hypervisor@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0 0x80700000 0 0x100000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi: xbl-uefi-res@80880000 {
+			reg = <0 0x80880000 0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		fw_mem: fw@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
+			reg = <0 0x80c00000 0 0x1e00000>;
+			no-map;
+		};
+
+		dfps_data_mem: dpfs-data@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		pil_wlan_mem: pil-wlan@86500000 {
+			reg = <0 0x86500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@86700000 {
+			reg = <0 0x86700000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: pil-cdsp@88700000 {
+			reg = <0 0x88700000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@8a500000 {
+			reg = <0 0x8a500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
+			reg = <0 0x8aa00000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
+			reg = <0 0x8aa10000 0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
+			reg = <0 0x8aa1a000 0 0x2000>;
+			no-map;
+		};
+
+		pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
+			reg = <0 0x8b800000 0 0x10000000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0 0xc0000000 0 0x5100000>;
+			no-map;
+		};
+
+		debug_mem: debug@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x80000>;
+			no-map;
+		};
+
+		cmdline_region: cmdline@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					     IPCC_MPROC_SIGNAL_GLINK_QMP
+					     IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6375";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6375-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_ret: opp1 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION>;
+					};
+
+					rpmpd_opp_min_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp5 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp7 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_no_cpr: opp9 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		ipcc: mailbox@208000 {
+			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+			reg = <0 0x00208000 0 0x1000>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6375-tlmm";
+			reg = <0 0x00500000 0 0x800000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			interrupt-controller;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio61", "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				/* TLMM, GCC and vendor DT all have different indices.. */
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,sm6375-gcc";
+			reg = <0 0x01400000 0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&sleep_clk>;
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@162b000 {
+			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x0162b000 0 0x400>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x01c40000 0 0x1100>,
+			      <0 0x01e00000 0 0x2000000>,
+			      <0 0x03e00000 0 0x100000>,
+			      <0 0x03f00000 0 0xa0000>,
+			      <0 0x01c0a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0 0x045f0000 0 0x7000>;
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x04784000 0 0x1000>;
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04a00000 0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+			 * There is a comment in the included DTSI of another SoC saying that they
+			 * are not "bolled out" (probably meaning not routed to solder balls)
+			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
+			 * Most of which don't even have pin configurations for.. Sad stuff!
+			 */
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04c00000 0 0x60000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04cc0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+			reg = <0 0x04ef8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			/*
+			 * This property is there to allow USB2 to work, as
+			 * USB3 is not implemented yet - (re)move it when
+			 * proper support is in place.
+			 */
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x04e00000 0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				maximum-speed = "high-speed";
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0xe0 0x0>;
+
+				/* Yes, this impl *does* have an unfunny number of quirks.. */
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,usb3_lpm_capable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@a400000 {
+			compatible = "qcom,sm6375-adsp-pas";
+			reg = <0 0x0a400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+					<&rpmpd SM6375_VDD_LPI_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b000000 {
+			compatible = "qcom,sm6375-cdsp-pas";
+			reg = <0x0 0x0b000000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+			reg = <0 0x0c600000 0 0x100000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
+			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			redistributor-stride = <0 0x20000>;
+			interrupt-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x0f420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0x0f243000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0x0f425000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0x0f427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0x0f429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0x0f42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0x0f42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		cpufreq_hw: cpufreq@fd91000 {
+			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 30c94fd4fe61..c456e9594ea5 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -279,8 +279,11 @@
 
 		vreg_l6e: ldo6 {
 			regulator-min-microvolt = <1700000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7e: ldo7 {
@@ -297,8 +300,11 @@
 
 		vreg_l9e: ldo9 {
 			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10e: ldo10 {
@@ -424,6 +430,33 @@
 	status = "okay";
 };
 
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9e>;
+	vqmmc-supply = <&vreg_l6e>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index bb278ecac3fa..5397fba9417b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -475,7 +475,7 @@
 &tlmm {
 	gpio-reserved-ranges = <126 4>;
 
-	da7280_intr_default: da7280-intr-default {
+	da7280_intr_default: da7280-intr-default-state {
 		pins = "gpio42";
 		function = "gpio";
 		bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index 014fe3a31548..c958a8b16730 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,6 +348,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -367,6 +369,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cef8c4f4f0ff..a0c57fb798d3 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -887,7 +887,7 @@
 		};
 
 		gpi_dma0: dma-controller@800000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1222,7 +1222,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1471,7 +1471,7 @@
 		};
 
 		gpi_dma2: dma-controller@c00000 {
-			compatible = "qcom,sm8150-gpi-dma";
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0xc00000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -2032,11 +2032,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2074,8 +2074,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 3>,
-					<&rpmhpd 2>;
+			power-domains = <&rpmhpd SM8150_LCX>,
+					<&rpmhpd SM8150_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -2276,422 +2276,302 @@
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
-			qup_i2c0_default: qup-i2c0-default {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "qup0";
-				};
-
-				config {
-					pins = "gpio0", "gpio1";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <0x02>;
+				bias-disable;
 			};
 
-			qup_spi0_default: qup-spi0-default {
+			qup_spi0_default: qup-spi0-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "qup0";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				mux {
-					pins = "gpio114", "gpio115";
-					function = "qup1";
-				};
-
-				config {
-					pins = "gpio114", "gpio115";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio114", "gpio115";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi1_default: qup-spi1-default {
+			qup_spi1_default: qup-spi1-default-state {
 				pins = "gpio114", "gpio115", "gpio116", "gpio117";
 				function = "qup1";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				mux {
-					pins = "gpio126", "gpio127";
-					function = "qup2";
-				};
-
-				config {
-					pins = "gpio126", "gpio127";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio126", "gpio127";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi2_default: qup-spi2-default {
+			qup_spi2_default: qup-spi2-default-state {
 				pins = "gpio126", "gpio127", "gpio128", "gpio129";
 				function = "qup2";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				mux {
-					pins = "gpio144", "gpio145";
-					function = "qup3";
-				};
-
-				config {
-					pins = "gpio144", "gpio145";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio144", "gpio145";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi3_default: qup-spi3-default {
+			qup_spi3_default: qup-spi3-default-state {
 				pins = "gpio144", "gpio145", "gpio146", "gpio147";
 				function = "qup3";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				mux {
-					pins = "gpio51", "gpio52";
-					function = "qup4";
-				};
-
-				config {
-					pins = "gpio51", "gpio52";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio51", "gpio52";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi4_default: qup-spi4-default {
+			qup_spi4_default: qup-spi4-default-state {
 				pins = "gpio51", "gpio52", "gpio53", "gpio54";
 				function = "qup4";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				mux {
-					pins = "gpio121", "gpio122";
-					function = "qup5";
-				};
-
-				config {
-					pins = "gpio121", "gpio122";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi5_default: qup-spi5-default {
+			qup_spi5_default: qup-spi5-default-state {
 				pins = "gpio119", "gpio120", "gpio121", "gpio122";
 				function = "qup5";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				mux {
-					pins = "gpio6", "gpio7";
-					function = "qup6";
-				};
-
-				config {
-					pins = "gpio6", "gpio7";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi6_default: qup-spi6_default {
+			qup_spi6_default: qup-spi6_default-state {
 				pins = "gpio4", "gpio5", "gpio6", "gpio7";
 				function = "qup6";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				mux {
-					pins = "gpio98", "gpio99";
-					function = "qup7";
-				};
-
-				config {
-					pins = "gpio98", "gpio99";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio98", "gpio99";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi7_default: qup-spi7_default {
+			qup_spi7_default: qup-spi7_default-state {
 				pins = "gpio98", "gpio99", "gpio100", "gpio101";
 				function = "qup7";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				mux {
-					pins = "gpio88", "gpio89";
-					function = "qup8";
-				};
-
-				config {
-					pins = "gpio88", "gpio89";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio88", "gpio89";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi8_default: qup-spi8-default {
+			qup_spi8_default: qup-spi8-default-state {
 				pins = "gpio88", "gpio89", "gpio90", "gpio91";
 				function = "qup8";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				mux {
-					pins = "gpio39", "gpio40";
-					function = "qup9";
-				};
-
-				config {
-					pins = "gpio39", "gpio40";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio39", "gpio40";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi9_default: qup-spi9-default {
+			qup_spi9_default: qup-spi9-default-state {
 				pins = "gpio39", "gpio40", "gpio41", "gpio42";
 				function = "qup9";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				mux {
-					pins = "gpio9", "gpio10";
-					function = "qup10";
-				};
-
-				config {
-					pins = "gpio9", "gpio10";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio9", "gpio10";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi10_default: qup-spi10-default {
+			qup_spi10_default: qup-spi10-default-state {
 				pins = "gpio9", "gpio10", "gpio11", "gpio12";
 				function = "qup10";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				mux {
-					pins = "gpio94", "gpio95";
-					function = "qup11";
-				};
-
-				config {
-					pins = "gpio94", "gpio95";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi11_default: qup-spi11-default {
+			qup_spi11_default: qup-spi11-default-state {
 				pins = "gpio92", "gpio93", "gpio94", "gpio95";
 				function = "qup11";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c12_default: qup-i2c12-default {
-				mux {
-					pins = "gpio83", "gpio84";
-					function = "qup12";
-				};
-
-				config {
-					pins = "gpio83", "gpio84";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio83", "gpio84";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi12_default: qup-spi12-default {
+			qup_spi12_default: qup-spi12-default-state {
 				pins = "gpio83", "gpio84", "gpio85", "gpio86";
 				function = "qup12";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c13_default: qup-i2c13-default {
-				mux {
-					pins = "gpio43", "gpio44";
-					function = "qup13";
-				};
-
-				config {
-					pins = "gpio43", "gpio44";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio43", "gpio44";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi13_default: qup-spi13-default {
+			qup_spi13_default: qup-spi13-default-state {
 				pins = "gpio43", "gpio44", "gpio45", "gpio46";
 				function = "qup13";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c14_default: qup-i2c14-default {
-				mux {
-					pins = "gpio47", "gpio48";
-					function = "qup14";
-				};
-
-				config {
-					pins = "gpio47", "gpio48";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio47", "gpio48";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi14_default: qup-spi14-default {
+			qup_spi14_default: qup-spi14-default-state {
 				pins = "gpio47", "gpio48", "gpio49", "gpio50";
 				function = "qup14";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c15_default: qup-i2c15-default {
-				mux {
-					pins = "gpio27", "gpio28";
-					function = "qup15";
-				};
-
-				config {
-					pins = "gpio27", "gpio28";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi15_default: qup-spi15-default {
+			qup_spi15_default: qup-spi15-default-state {
 				pins = "gpio27", "gpio28", "gpio29", "gpio30";
 				function = "qup15";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c16_default: qup-i2c16-default {
-				mux {
-					pins = "gpio86", "gpio85";
-					function = "qup16";
-				};
-
-				config {
-					pins = "gpio86", "gpio85";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio86", "gpio85";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi16_default: qup-spi16-default {
+			qup_spi16_default: qup-spi16-default-state {
 				pins = "gpio83", "gpio84", "gpio85", "gpio86";
 				function = "qup16";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c17_default: qup-i2c17-default {
-				mux {
-					pins = "gpio55", "gpio56";
-					function = "qup17";
-				};
-
-				config {
-					pins = "gpio55", "gpio56";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi17_default: qup-spi17-default {
+			qup_spi17_default: qup-spi17-default-state {
 				pins = "gpio55", "gpio56", "gpio57", "gpio58";
 				function = "qup17";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c18_default: qup-i2c18-default {
-				mux {
-					pins = "gpio23", "gpio24";
-					function = "qup18";
-				};
-
-				config {
-					pins = "gpio23", "gpio24";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio23", "gpio24";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi18_default: qup-spi18-default {
+			qup_spi18_default: qup-spi18-default-state {
 				pins = "gpio23", "gpio24", "gpio25", "gpio26";
 				function = "qup18";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_i2c19_default: qup-i2c19-default {
-				mux {
-					pins = "gpio57", "gpio58";
-					function = "qup19";
-				};
-
-				config {
-					pins = "gpio57", "gpio58";
-					drive-strength = <0x02>;
-					bias-disable;
-				};
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi19_default: qup-spi19-default {
+			qup_spi19_default: qup-spi19-default-state {
 				pins = "gpio55", "gpio56", "gpio57", "gpio58";
 				function = "qup19";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			pcie0_default_state: pcie0-default {
-				perst {
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
 					pins = "gpio35";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio36";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio37";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2699,22 +2579,22 @@
 				};
 			};
 
-			pcie1_default_state: pcie1-default {
-				perst {
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
 					pins = "gpio102";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio103";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio104";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2739,8 +2619,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>,
-					<&rpmhpd 0>;
+			power-domains = <&rpmhpd SM8150_CX>,
+					<&rpmhpd SM8150_MSS>;
 			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
@@ -3366,7 +3246,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>;
+			power-domains = <&rpmhpd SM8150_CX>;
 
 			memory-region = <&cdsp_mem>;
 
@@ -3867,7 +3747,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 7>;
+			power-domains = <&rpmhpd SM8150_CX>;
 
 			memory-region = <&adsp_mem>;
 
@@ -4010,6 +3890,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
@@ -4078,7 +3959,7 @@
 		};
 
 		osm_l3: interconnect@18321000 {
-			compatible = "qcom,sm8150-osm-l3";
+			compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
 			reg = <0 0x18321000 0 0x1400>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index a102aa5efa32..3ed8c84e25b8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -635,7 +635,7 @@
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
 		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		vdd-buck-supply = <&vreg_s4a_1p8>;
 		vdd-rxtx-supply = <&vreg_s4a_1p8>;
 		vdd-io-supply = <&vreg_s4a_1p8>;
@@ -757,7 +757,7 @@
 };
 
 &swr0 {
-	left_spkr: wsa8810-right@0,3{
+	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
 		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
@@ -766,7 +766,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	right_spkr: wsa8810-left@0,4{
+	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
 		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
@@ -799,31 +799,19 @@
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <40 4>;
 
-	wcd938x_reset_default: wcd938x_reset_default {
-		mux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
-			drive-strength = <16>;
-			output-high;
-		};
+	wcd938x_reset_default: wcd938x-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
 	};
 
-	wcd938x_reset_sleep: wcd938x_reset_sleep {
-		mux {
-			pins = "gpio32";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-			output-low;
-		};
+	wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 549e0a2aa9fe..09a31f707639 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,6 +317,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_2p85: ldo7 {
@@ -339,6 +341,8 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -434,7 +438,16 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	/* NXP PN553 NFC @ 28 */
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &i2c2 {
@@ -572,7 +585,7 @@
 	vqmmc-supply = <&vreg_l6c_2p9>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 };
 
 &slpi {
@@ -582,49 +595,49 @@
 &tlmm {
 	gpio-reserved-ranges = <40 4>, <52 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 	};
 
-	mdm2ap_default: mdm2ap-default {
+	mdm2ap_default: mdm2ap-default-state {
 		pins = "gpio1", "gpio3";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
-		bias-disabled;
+		bias-disable;
 		input-enable;
 	};
 
-	ap2mdm_default: ap2mdm-default {
+	ap2mdm_default: ap2mdm-default-state {
 		pins = "gpio56", "gpio57";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-disable;
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a5b62cadb129..dab5579946f3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -334,6 +334,7 @@
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
 				local-timer-stop;
+				status = "disabled";
 			};
 		};
 	};
@@ -936,7 +937,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00800000 0 0x70000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -1187,7 +1188,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00900000 0 0x70000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1505,7 +1506,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8250-gpi-dma";
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0 0x00a00000 0 0x70000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -2179,11 +2180,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2360,7 +2361,6 @@
 			qcom,ports-word-length =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
 			qcom,ports-lane-control =	/bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
-			qcom,port-offset = <1>;
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2388,8 +2388,8 @@
 				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "core", "audio";
 
-			wsa_swr_active: wsa-swr-active-pins {
-				clk {
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
@@ -2397,7 +2397,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
@@ -2407,8 +2407,8 @@
 				};
 			};
 
-			wsa_swr_sleep: wsa-swr-sleep-pins {
-				clk {
+			wsa_swr_sleep: wsa-swr-sleep-state {
+				clk-pins {
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
@@ -2416,7 +2416,7 @@
 					bias-pull-down;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
@@ -2426,14 +2426,14 @@
 				};
 			};
 
-			dmic01_active: dmic01-active-pins {
-				clk {
+			dmic01_active: dmic01-active-state {
+				clk-pins {
 					pins = "gpio6";
 					function = "dmic1_clk";
 					drive-strength = <8>;
 					output-high;
 				};
-				data {
+				data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
@@ -2441,8 +2441,8 @@
 				};
 			};
 
-			dmic01_sleep: dmic01-sleep-pins {
-				clk {
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
 					pins = "gpio6";
 					function = "dmic1_clk";
 					drive-strength = <2>;
@@ -2450,17 +2450,17 @@
 					output-low;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <2>;
-					pull-down;
+					bias-pull-down;
 					input-enable;
 				};
 			};
 
-			rx_swr_active: rx_swr-active-pins {
-				clk {
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
 					pins = "gpio3";
 					function = "swr_rx_clk";
 					drive-strength = <2>;
@@ -2468,7 +2468,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio4", "gpio5";
 					function = "swr_rx_data";
 					drive-strength = <2>;
@@ -2477,8 +2477,8 @@
 				};
 			};
 
-			tx_swr_active: tx_swr-active-pins {
-				clk {
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
@@ -2486,7 +2486,7 @@
 					bias-disable;
 				};
 
-				data {
+				data-pins {
 					pins = "gpio1", "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2495,8 +2495,8 @@
 				};
 			};
 
-			tx_swr_sleep: tx_swr-sleep-pins {
-				clk {
+			tx_swr_sleep: tx-swr-sleep-state {
+				clk-pins {
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
@@ -2504,7 +2504,7 @@
 					bias-pull-down;
 				};
 
-				data1 {
+				data1-pins {
 					pins = "gpio1";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2512,7 +2512,7 @@
 					bias-bus-hold;
 				};
 
-				data2 {
+				data2-pins {
 					pins = "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
@@ -2729,6 +2729,503 @@
 			};
 		};
 
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_in1_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_out_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_merg_out_funnel_swao: endpoint {
+					remote-endpoint = <&funnel_swao_in_funnel_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_merg_in_funnel_in0: endpoint {
+					remote-endpoint = <&funnel_in0_out_funnel_merg>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_merg_in_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_out_funnel_merg>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_cx_in_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_out_cx_in>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			arm,primecell-periphid = <0x000bb908>;
+
+			reg = <0 0x06b04000 0 0x1000>;
+			reg-names = "funnel-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_swao_out_etf: endpoint {
+						remote-endpoint = <&etf_in_funnel_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_swao_in_funnel_merg: endpoint {
+						remote-endpoint= <&funnel_merg_out_funnel_swao>;
+					};
+				};
+			};
+
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_funnel_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_out_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_swao_out_cx_in: endpoint {
+						remote-endpoint = <&replicator_cx_in_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_in_funnel_apss>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port {
+					funnel_apss_merg_out_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss_merg_in_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
+					};
+				};
+			};
+		};
+
 		cdsp: remoteproc@8300000 {
 			compatible = "qcom,sm8250-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
@@ -2891,15 +3388,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -3415,6 +3908,35 @@
 					     "cam_hf_0_mnoc",
 					     "cam_sf_0_mnoc",
 					     "cam_sf_icp_mnoc";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+			};
 		};
 
 		camcc: clock-controller@ad00000 {
@@ -3555,7 +4077,6 @@
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				phys = <&dsi0_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -3600,7 +4121,7 @@
 				};
 			};
 
-			dsi0_phy: dsi-phy@ae94400 {
+			dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3647,7 +4168,6 @@
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				phys = <&dsi1_phy>;
-				phy-names = "dsi";
 
 				status = "disabled";
 
@@ -3673,7 +4193,7 @@
 				};
 			};
 
-			dsi1_phy: dsi-phy@ae96400 {
+			dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -3798,8 +4318,41 @@
 			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
-			cci0_default: cci0-default {
-				cci0_i2c0_default: cci0-i2c0-default {
+			cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
 					/* SDA, SCL */
 					pins = "gpio101", "gpio102";
 					function = "cci_i2c";
@@ -3808,7 +4361,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci0_i2c1_default: cci0-i2c1-default {
+				cci0_i2c1_default: cci0-i2c1-default-pins {
 					/* SDA, SCL */
 					pins = "gpio103", "gpio104";
 					function = "cci_i2c";
@@ -3818,8 +4371,8 @@
 				};
 			};
 
-			cci0_sleep: cci0-sleep {
-				cci0_i2c0_sleep: cci0-i2c0-sleep {
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio101", "gpio102";
 					function = "cci_i2c";
@@ -3828,7 +4381,7 @@
 					bias-pull-down;
 				};
 
-				cci0_i2c1_sleep: cci0-i2c1-sleep {
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio103", "gpio104";
 					function = "cci_i2c";
@@ -3838,8 +4391,8 @@
 				};
 			};
 
-			cci1_default: cci1-default {
-				cci1_i2c0_default: cci1-i2c0-default {
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
 					/* SDA, SCL */
 					pins = "gpio105","gpio106";
 					function = "cci_i2c";
@@ -3848,7 +4401,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci1_i2c1_default: cci1-i2c1-default {
+				cci1_i2c1_default: cci1-i2c1-default-pins {
 					/* SDA, SCL */
 					pins = "gpio107","gpio108";
 					function = "cci_i2c";
@@ -3858,8 +4411,8 @@
 				};
 			};
 
-			cci1_sleep: cci1-sleep {
-				cci1_i2c0_sleep: cci1-i2c0-sleep {
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio105","gpio106";
 					function = "cci_i2c";
@@ -3868,7 +4421,7 @@
 					drive-strength = <2>; /* 2 mA */
 				};
 
-				cci1_i2c1_sleep: cci1-i2c1-sleep {
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
 					/* SDA, SCL */
 					pins = "gpio107","gpio108";
 					function = "cci_i2c";
@@ -3878,22 +4431,22 @@
 				};
 			};
 
-			pri_mi2s_active: pri-mi2s-active {
-				sclk {
+			pri_mi2s_active: pri-mi2s-active-state {
+				sclk-pins {
 					pins = "gpio138";
 					function = "mi2s0_sck";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				ws {
+				ws-pins {
 					pins = "gpio141";
 					function = "mi2s0_ws";
 					drive-strength = <8>;
 					output-high;
 				};
 
-				data0 {
+				data0-pins {
 					pins = "gpio139";
 					function = "mi2s0_data0";
 					drive-strength = <8>;
@@ -3901,7 +4454,7 @@
 					output-high;
 				};
 
-				data1 {
+				data1-pins {
 					pins = "gpio140";
 					function = "mi2s0_data1";
 					drive-strength = <8>;
@@ -3909,632 +4462,500 @@
 				};
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
-				mux {
-					pins = "gpio28", "gpio29";
-					function = "qup0";
-				};
-
-				config {
-					pins = "gpio28", "gpio29";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
-				pinmux {
-					pins = "gpio4", "gpio5";
-					function = "qup1";
-				};
-
-				config {
-					pins = "gpio4", "gpio5";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "qup2";
-				};
-
-				config {
-					pins = "gpio115", "gpio116";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c3_default: qup-i2c3-default {
-				mux {
-					pins = "gpio119", "gpio120";
-					function = "qup3";
-				};
-
-				config {
-					pins = "gpio119", "gpio120";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio119", "gpio120";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "qup4";
-				};
-
-				config {
-					pins = "gpio8", "gpio9";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "qup5";
-				};
-
-				config {
-					pins = "gpio12", "gpio13";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "qup6";
-				};
-
-				config {
-					pins = "gpio16", "gpio17";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "qup7";
-				};
-
-				config {
-					pins = "gpio20", "gpio21";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
-				mux {
-					pins = "gpio24", "gpio25";
-					function = "qup8";
-				};
-
-				config {
-					pins = "gpio24", "gpio25";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
-				mux {
-					pins = "gpio125", "gpio126";
-					function = "qup9";
-				};
-
-				config {
-					pins = "gpio125", "gpio126";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio125", "gpio126";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
-				mux {
-					pins = "gpio129", "gpio130";
-					function = "qup10";
-				};
-
-				config {
-					pins = "gpio129", "gpio130";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio129", "gpio130";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "qup11";
-				};
-
-				config {
-					pins = "gpio60", "gpio61";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c12_default: qup-i2c12-default {
-				mux {
-					pins = "gpio32", "gpio33";
-					function = "qup12";
-				};
-
-				config {
-					pins = "gpio32", "gpio33";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c13_default: qup-i2c13-default {
-				mux {
-					pins = "gpio36", "gpio37";
-					function = "qup13";
-				};
-
-				config {
-					pins = "gpio36", "gpio37";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c14_default: qup-i2c14-default {
-				mux {
-					pins = "gpio40", "gpio41";
-					function = "qup14";
-				};
-
-				config {
-					pins = "gpio40", "gpio41";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c15_default: qup-i2c15-default {
-				mux {
-					pins = "gpio44", "gpio45";
-					function = "qup15";
-				};
-
-				config {
-					pins = "gpio44", "gpio45";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c16_default: qup-i2c16-default {
-				mux {
-					pins = "gpio48", "gpio49";
-					function = "qup16";
-				};
-
-				config {
-					pins = "gpio48", "gpio49";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c17_default: qup-i2c17-default {
-				mux {
-					pins = "gpio52", "gpio53";
-					function = "qup17";
-				};
-
-				config {
-					pins = "gpio52", "gpio53";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c18_default: qup-i2c18-default {
-				mux {
-					pins = "gpio56", "gpio57";
-					function = "qup18";
-				};
-
-				config {
-					pins = "gpio56", "gpio57";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_i2c19_default: qup-i2c19-default {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "qup19";
-				};
-
-				config {
-					pins = "gpio0", "gpio1";
-					drive-strength = <2>;
-					bias-disable;
-				};
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			qup_spi0_cs: qup-spi0-cs {
+			qup_spi0_cs: qup-spi0-cs-state {
 				pins = "gpio31";
 				function = "qup0";
 			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
 				pins = "gpio31";
 				function = "gpio";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk {
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
 				pins = "gpio28", "gpio29",
 				       "gpio30";
 				function = "qup0";
 			};
 
-			qup_spi1_cs: qup-spi1-cs {
+			qup_spi1_cs: qup-spi1-cs-state {
 				pins = "gpio7";
 				function = "qup1";
 			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
 				pins = "gpio7";
 				function = "gpio";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk {
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
 				pins = "gpio4", "gpio5",
 				       "gpio6";
 				function = "qup1";
 			};
 
-			qup_spi2_cs: qup-spi2-cs {
+			qup_spi2_cs: qup-spi2-cs-state {
 				pins = "gpio118";
 				function = "qup2";
 			};
 
-			qup_spi2_cs_gpio: qup-spi2-cs-gpio {
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
 				pins = "gpio118";
 				function = "gpio";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk {
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
 				pins = "gpio115", "gpio116",
 				       "gpio117";
 				function = "qup2";
 			};
 
-			qup_spi3_cs: qup-spi3-cs {
+			qup_spi3_cs: qup-spi3-cs-state {
 				pins = "gpio122";
 				function = "qup3";
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
 				pins = "gpio122";
 				function = "gpio";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk {
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
 				pins = "gpio119", "gpio120",
 				       "gpio121";
 				function = "qup3";
 			};
 
-			qup_spi4_cs: qup-spi4-cs {
+			qup_spi4_cs: qup-spi4-cs-state {
 				pins = "gpio11";
 				function = "qup4";
 			};
 
-			qup_spi4_cs_gpio: qup-spi4-cs-gpio {
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
 				pins = "gpio11";
 				function = "gpio";
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk {
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
 				pins = "gpio8", "gpio9",
 				       "gpio10";
 				function = "qup4";
 			};
 
-			qup_spi5_cs: qup-spi5-cs {
+			qup_spi5_cs: qup-spi5-cs-state {
 				pins = "gpio15";
 				function = "qup5";
 			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
 				pins = "gpio15";
 				function = "gpio";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk {
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
 				pins = "gpio12", "gpio13",
 				       "gpio14";
 				function = "qup5";
 			};
 
-			qup_spi6_cs: qup-spi6-cs {
+			qup_spi6_cs: qup-spi6-cs-state {
 				pins = "gpio19";
 				function = "qup6";
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
 				pins = "gpio19";
 				function = "gpio";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk {
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
 				pins = "gpio16", "gpio17",
 				       "gpio18";
 				function = "qup6";
 			};
 
-			qup_spi7_cs: qup-spi7-cs {
+			qup_spi7_cs: qup-spi7-cs-state {
 				pins = "gpio23";
 				function = "qup7";
 			};
 
-			qup_spi7_cs_gpio: qup-spi7-cs-gpio {
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
 				pins = "gpio23";
 				function = "gpio";
 			};
 
-			qup_spi7_data_clk: qup-spi7-data-clk {
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
 				pins = "gpio20", "gpio21",
 				       "gpio22";
 				function = "qup7";
 			};
 
-			qup_spi8_cs: qup-spi8-cs {
+			qup_spi8_cs: qup-spi8-cs-state {
 				pins = "gpio27";
 				function = "qup8";
 			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
 				pins = "gpio27";
 				function = "gpio";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk {
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
 				pins = "gpio24", "gpio25",
 				       "gpio26";
 				function = "qup8";
 			};
 
-			qup_spi9_cs: qup-spi9-cs {
+			qup_spi9_cs: qup-spi9-cs-state {
 				pins = "gpio128";
 				function = "qup9";
 			};
 
-			qup_spi9_cs_gpio: qup-spi9-cs-gpio {
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
 				pins = "gpio128";
 				function = "gpio";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk {
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
 				pins = "gpio125", "gpio126",
 				       "gpio127";
 				function = "qup9";
 			};
 
-			qup_spi10_cs: qup-spi10-cs {
+			qup_spi10_cs: qup-spi10-cs-state {
 				pins = "gpio132";
 				function = "qup10";
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
 				pins = "gpio132";
 				function = "gpio";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk {
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
 				pins = "gpio129", "gpio130",
 				       "gpio131";
 				function = "qup10";
 			};
 
-			qup_spi11_cs: qup-spi11-cs {
+			qup_spi11_cs: qup-spi11-cs-state {
 				pins = "gpio63";
 				function = "qup11";
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
 				pins = "gpio63";
 				function = "gpio";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk {
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
 				pins = "gpio60", "gpio61",
 				       "gpio62";
 				function = "qup11";
 			};
 
-			qup_spi12_cs: qup-spi12-cs {
+			qup_spi12_cs: qup-spi12-cs-state {
 				pins = "gpio35";
 				function = "qup12";
 			};
 
-			qup_spi12_cs_gpio: qup-spi12-cs-gpio {
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
 				pins = "gpio35";
 				function = "gpio";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk {
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
 				pins = "gpio32", "gpio33",
 				       "gpio34";
 				function = "qup12";
 			};
 
-			qup_spi13_cs: qup-spi13-cs {
+			qup_spi13_cs: qup-spi13-cs-state {
 				pins = "gpio39";
 				function = "qup13";
 			};
 
-			qup_spi13_cs_gpio: qup-spi13-cs-gpio {
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
 				pins = "gpio39";
 				function = "gpio";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk {
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
 				pins = "gpio36", "gpio37",
 				       "gpio38";
 				function = "qup13";
 			};
 
-			qup_spi14_cs: qup-spi14-cs {
+			qup_spi14_cs: qup-spi14-cs-state {
 				pins = "gpio43";
 				function = "qup14";
 			};
 
-			qup_spi14_cs_gpio: qup-spi14-cs-gpio {
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
 				pins = "gpio43";
 				function = "gpio";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk {
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
 				pins = "gpio40", "gpio41",
 				       "gpio42";
 				function = "qup14";
 			};
 
-			qup_spi15_cs: qup-spi15-cs {
+			qup_spi15_cs: qup-spi15-cs-state {
 				pins = "gpio47";
 				function = "qup15";
 			};
 
-			qup_spi15_cs_gpio: qup-spi15-cs-gpio {
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
 				pins = "gpio47";
 				function = "gpio";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk {
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
 				pins = "gpio44", "gpio45",
 				       "gpio46";
 				function = "qup15";
 			};
 
-			qup_spi16_cs: qup-spi16-cs {
+			qup_spi16_cs: qup-spi16-cs-state {
 				pins = "gpio51";
 				function = "qup16";
 			};
 
-			qup_spi16_cs_gpio: qup-spi16-cs-gpio {
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
 				pins = "gpio51";
 				function = "gpio";
 			};
 
-			qup_spi16_data_clk: qup-spi16-data-clk {
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
 				pins = "gpio48", "gpio49",
 				       "gpio50";
 				function = "qup16";
 			};
 
-			qup_spi17_cs: qup-spi17-cs {
+			qup_spi17_cs: qup-spi17-cs-state {
 				pins = "gpio55";
 				function = "qup17";
 			};
 
-			qup_spi17_cs_gpio: qup-spi17-cs-gpio {
+			qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
 				pins = "gpio55";
 				function = "gpio";
 			};
 
-			qup_spi17_data_clk: qup-spi17-data-clk {
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
 				pins = "gpio52", "gpio53",
 				       "gpio54";
 				function = "qup17";
 			};
 
-			qup_spi18_cs: qup-spi18-cs {
+			qup_spi18_cs: qup-spi18-cs-state {
 				pins = "gpio59";
 				function = "qup18";
 			};
 
-			qup_spi18_cs_gpio: qup-spi18-cs-gpio {
+			qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
 				pins = "gpio59";
 				function = "gpio";
 			};
 
-			qup_spi18_data_clk: qup-spi18-data-clk {
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
 				pins = "gpio56", "gpio57",
 				       "gpio58";
 				function = "qup18";
 			};
 
-			qup_spi19_cs: qup-spi19-cs {
+			qup_spi19_cs: qup-spi19-cs-state {
 				pins = "gpio3";
 				function = "qup19";
 			};
 
-			qup_spi19_cs_gpio: qup-spi19-cs-gpio {
+			qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
 				pins = "gpio3";
 				function = "gpio";
 			};
 
-			qup_spi19_data_clk: qup-spi19-data-clk {
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
 				pins = "gpio0", "gpio1",
 				       "gpio2";
 				function = "qup19";
 			};
 
-			qup_uart2_default: qup-uart2-default {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "qup2";
-				};
+			qup_uart2_default: qup-uart2-default-state {
+				pins = "gpio117", "gpio118";
+				function = "qup2";
 			};
 
-			qup_uart6_default: qup-uart6-default {
-				mux {
-					pins = "gpio16", "gpio17",
-						"gpio18", "gpio19";
-					function = "qup6";
-				};
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "qup6";
 			};
 
-			qup_uart12_default: qup-uart12-default {
-				mux {
-					pins = "gpio34", "gpio35";
-					function = "qup12";
-				};
+			qup_uart12_default: qup-uart12-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup12";
 			};
 
-			qup_uart17_default: qup-uart17-default {
-				mux {
-					pins = "gpio52", "gpio53",
-						"gpio54", "gpio55";
-					function = "qup17";
-				};
+			qup_uart17_default: qup-uart17-default-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup17";
 			};
 
-			qup_uart18_default: qup-uart18-default {
-				mux {
-					pins = "gpio58", "gpio59";
-					function = "qup18";
-				};
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
 			};
 
-			tert_mi2s_active: tert-mi2s-active {
-				sck {
+			tert_mi2s_active: tert-mi2s-active-state {
+				sck-pins {
 					pins = "gpio133";
 					function = "mi2s2_sck";
 					drive-strength = <8>;
 					bias-disable;
 				};
 
-				data0 {
+				data0-pins {
 					pins = "gpio134";
 					function = "mi2s2_data0";
 					drive-strength = <8>;
@@ -4542,7 +4963,7 @@
 					output-high;
 				};
 
-				ws {
+				ws-pins {
 					pins = "gpio135";
 					function = "mi2s2_ws";
 					drive-strength = <8>;
@@ -4550,42 +4971,42 @@
 				};
 			};
 
-			sdc2_sleep_state: sdc2-sleep {
-				clk {
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 			};
 
-			pcie0_default_state: pcie0-default {
-				perst {
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
 					pins = "gpio79";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio80";
 					function = "pci_e0";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio81";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4593,22 +5014,22 @@
 				};
 			};
 
-			pcie1_default_state: pcie1-default {
-				perst {
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
 					pins = "gpio82";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio83";
 					function = "pci_e1";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio84";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4616,22 +5037,22 @@
 				};
 			};
 
-			pcie2_default_state: pcie2-default {
-				perst {
+			pcie2_default_state: pcie2-default-state {
+				perst-pins {
 					pins = "gpio85";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio86";
 					function = "pci_e2";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio87";
 					function = "gpio";
 					drive-strength = <2>;
@@ -4790,13 +5211,13 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					apr-service@3 {
+					service@3 {
 						reg = <APR_SVC_ADSP_CORE>;
 						compatible = "qcom,q6core";
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
 					};
 
-					q6afe: apr-service@4 {
+					q6afe: service@4 {
 						compatible = "qcom,q6afe";
 						reg = <APR_SVC_AFE>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4807,13 +5228,13 @@
 							#sound-dai-cells = <1>;
 						};
 
-						q6afecc: cc {
+						q6afecc: clock-controller {
 							compatible = "qcom,q6afe-clocks";
 							#clock-cells = <2>;
 						};
 					};
 
-					q6asm: apr-service@7 {
+					q6asm: service@7 {
 						compatible = "qcom,q6asm";
 						reg = <APR_SVC_ASM>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4826,7 +5247,7 @@
 						};
 					};
 
-					q6adm: apr-service@8 {
+					q6adm: service@8 {
 						compatible = "qcom,q6adm";
 						reg = <APR_SVC_ADM>;
 						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
@@ -4955,6 +5376,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8250-rpmh-clk";
@@ -5019,7 +5441,7 @@
 		};
 
 		epss_l3: interconnect@18590000 {
-			compatible = "qcom,sm8250-epss-l3";
+			compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3";
 			reg = <0 0x18590000 0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..26a608144886 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,6 +107,8 @@
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
@@ -115,6 +117,8 @@
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p96: ldo7 {
@@ -123,6 +127,8 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
@@ -131,6 +137,8 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index d21bbeb603a6..c74c973a69d2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -11,3 +11,209 @@
 	model = "Sony Xperia 1 III";
 	compatible = "sony,pdx215-generic", "qcom,sm8350";
 };
+
+&tlmm {
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "PM8008_1_RESET_N",
+			  "WLC_INT_N",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CAM_MCLK4",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "TOF_RST_N",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN",
+			  "QLINK1_WMSS_RESET_N",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b3c9952ac173..1f2d660f8f86 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
 #include "pm8350b.dtsi"
@@ -73,16 +74,366 @@
 			no-map;
 		};
 	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &adsp {
 	status = "okay";
-	firmware-name = "qcom/adsp.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* TODO: Add pm8350b (just one ldo) once the driver part is in */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
 };
 
 &cdsp {
 	status = "okay";
-	firmware-name = "qcom/cdsp.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
 };
 
 &i2c1 {
@@ -175,12 +526,12 @@
 &ipa {
 	status = "okay";
 	memory-region = <&pil_ipa_fw_mem>;
-	firmware-name = "qcom/ipa_fws.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
 };
 
 &mpss {
 	status = "okay";
-	firmware-name = "qcom/modem.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
 };
 
 &pmk8350_rtc {
@@ -208,9 +559,21 @@
 	status = "okay";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
 &slpi {
 	status = "okay";
-	firmware-name = "qcom/slpi.mbn";
+	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
 };
 
 &spi14 {
@@ -221,6 +584,209 @@
 
 &tlmm {
 	gpio-reserved-ranges = <44 4>;
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "NC",
+			  "NC",
+			  "PM8008_1_RESET_N",
+			  "NC",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
 
 	ts_int_default: ts-int-default-state {
 		pins = "gpio23";
@@ -229,31 +795,45 @@
 		bias-disable;
 		input-enable;
 	};
+
+	sdc2_card_det_active: sd-card-det-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_card_det_sleep: sd-card-det-sleep-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
 &ufs_mem_hc { status = "disabled"; };
 &ufs_mem_phy { status = "disabled"; };
 
-/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
 &usb_1 {
 	status = "okay";
-
-	qcom,select-utmi-as-pipe-clk;
 };
 
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
-
-	maximum-speed = "high-speed";
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
 };
 
 &usb_1_hsphy {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
 };
 
 &usb_1_qmpphy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a86d9ea93b9d..245dce24ec59 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -678,7 +678,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -904,7 +904,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x09800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1209,7 +1209,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -1761,6 +1761,46 @@
 			gpio-ranges = <&tlmm 0 0 204>;
 			wakeup-parent = <&pdc>;
 
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			qup_uart3_default_state: qup-uart3-default-state {
 				rx-pins {
 					pins = "gpio18";
@@ -2004,6 +2044,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8350-rpmh-clk";
@@ -2142,11 +2183,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2221,7 +2262,7 @@
 
 		cdsp: remoteproc@98900000 {
 			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x098900000 0 0x1400000>;
+			reg = <0 0x98900000 0 0x1400000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2328,6 +2369,45 @@
 			};
 		};
 
+		sdhc_2: sdhci@8804000 {
+			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd SM8350_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8350-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 38ccd44620d0..4de3e1f1c39c 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "sm8450.dtsi"
 
 / {
@@ -394,8 +395,181 @@
 	status = "okay";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&soc {
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <1>;
+
+		vdd-buck-supply = <&vreg_s10b_1p8>;
+		vdd-rxtx-supply = <&vreg_s10b_1p8>;
+		vdd-io-supply = <&vreg_s10b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sm8450-sndcard";
+	model = "SM8450-HDK";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart7 {
@@ -442,3 +616,34 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
+&tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-default-state {
+		pins = "gpio43";
+		function = "gpio";
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index e58fc7399799..ee62514fff68 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -388,6 +388,18 @@
 	firmware-name = "qcom/sm8450/slpi.mbn";
 };
 
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
 &spi4 {
 	status = "okay";
 };
@@ -402,6 +414,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart7 {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index d68765eb6d4f..b83500316a81 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -1,634 +1,227 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
  */
 
 /dts-v1/;
 
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8450.dtsi"
-
-/delete-node/ &adsp_mem;
-/delete-node/ &rmtfs_mem;
-/delete-node/ &video_mem;
+#include "sm8450-sony-xperia-nagara.dtsi"
 
 / {
 	model = "Sony Xperia 1 IV";
 	compatible = "sony,pdx223", "qcom,sm8450";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &uart7;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		adsp_mem: memory@85700000 {
-			reg = <0x0 0x85700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		video_mem: memory@9fd00000 {
-			reg = <0x0 0x9fd00000 0x0 0x700000>;
-			no-map;
-		};
-
-		rmtfs_mem: memory@f3300000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0xf3300000 0x0 0x280000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <15>;
-		};
-
-		ramoops@ffc00000 {
-			compatible = "ramoops";
-			reg = <0 0xffc00000 0 0x200000>;
-			console-size = <0x40000>;
-			record-size = <0x1000>;
-			ecc-size = <16>;
-			no-map;
-		};
-	};
-
-	/* Sadly, the voltages for these GPIO regulators are unknown. */
-	imx650_vana_vreg: imx650-vana-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "imx650_vana_vreg";
-		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&apps_rsc {
-	pm8350-rpmh-regulators {
-		compatible = "qcom,pm8350-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-		vdd-s11-supply = <&vph_pwr>;
-		vdd-s12-supply = <&vph_pwr>;
-
-		vdd-l1-l4-supply = <&pm8350_s11>;
-		vdd-l2-l7-supply = <&vreg_bob>;
-		vdd-l3-l5-supply = <&vreg_bob>;
-		vdd-l6-l9-l10-supply = <&pm8350_s12>;
-
-		/*
-		 * ARC regulators:
-		 * s5 - gfx.lvl
-		 * l8 - lcx.lvl
-		 */
-
-		pm8350_s10: smps10 {
-			regulator-name = "pm8350_s10";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8350_s11: smps11 {
-			regulator-name = "pm8350_s11";
-			regulator-min-microvolt = <848000>;
-			regulator-max-microvolt = <1104000>;
-		};
-
-		pm8350_s12: smps12 {
-			regulator-name = "pm8350_s12";
-			regulator-min-microvolt = <1224000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		pm8350_l1: ldo1 {
-			regulator-name = "pm8350_l1";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l2: ldo2 {
-			regulator-name = "pm8350_l2";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l3: ldo3 {
-			regulator-name = "pm8350_l3";
-			regulator-min-microvolt = <904000>;
-			regulator-max-microvolt = <904000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l5: ldo5 {
-			regulator-name = "pm8350_l5";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l6: ldo6 {
-			regulator-name = "pm8350_l6";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l7: ldo7 {
-			regulator-name = "pm8350_l7";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350_l9: ldo9 {
-			regulator-name = "pm8350_l9";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pm8350c-rpmh-regulators {
-		compatible = "qcom,pm8350c-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-
-		vdd-l1-l12-supply = <&vreg_bob>;
-		vdd-l2-l8-supply = <&vreg_bob>;
-		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
-		vdd-l6-l9-l11-supply = <&vreg_bob>;
-		vdd-l10-supply = <&pm8350_s12>;
-
-		vdd-bob-supply = <&vph_pwr>;
-
-		/*
-		 * ARC regulators:
-		 * s2 - mxc.lvl
-		 * s4 - mss.lvl
-		 * s6 - cx.lvl
-		 */
-
-		pm8350c_s1: smps1 {
-			regulator-name = "pm8350c_s1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2024000>;
-		};
-
-		pm8350c_s10: smps10 {
-			regulator-name = "pm8350c_s10";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		vreg_bob: bob {
-			regulator-name = "vreg_bob";
-			regulator-min-microvolt = <3400000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-
-		pm8350c_l1: ldo1 {
-			regulator-name = "pm8350c_l1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l2: ldo2 {
-			regulator-name = "pm8350c_l2";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l3: ldo3 {
-			regulator-name = "pm8350c_l3";
-			regulator-min-microvolt = <3296000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l4: ldo4 {
-			regulator-name = "pm8350c_l4";
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l5: ldo5 {
-			regulator-name = "pm8350c_l5";
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l6: ldo6 {
-			regulator-name = "pm8350c_l6";
-			regulator-min-microvolt = <2960000>;
-			/* Originally max = 3008000 but SDHCI expects 2960000 */
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l7: ldo7 {
-			regulator-name = "pm8350c_l7";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l8: ldo8 {
-			regulator-name = "pm8350c_l8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l9: ldo9 {
-			regulator-name = "pm8350c_l9";
-			regulator-min-microvolt = <2960000>;
-			/* Originally max = 3008000 but SDHCI expects 2960000 */
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l10: ldo10 {
-			regulator-name = "pm8350c_l10";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l12: ldo12 {
-			regulator-name = "pm8350c_l12";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8350c_l13: ldo13 {
-			regulator-name = "pm8350c_l13";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pm8450-rpmh-regulators {
-		compatible = "qcom,pm8450-rpmh-regulators";
-		qcom,pmic-id = "h";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-
-		vdd-l2-supply = <&vreg_bob>;
-		vdd-l3-supply = <&vreg_bob>;
-		vdd-l4-supply = <&vreg_bob>;
-
-		/*
-		 * ARC regulators:
-		 * S2 - ebi.lvl
-		 * S4 - mmcx.lvl
-		 * S6 - mx.lvl
-		 * L1 - lmx.lvl
-		 */
-
-		pm8450_s3: smps3 {
-			regulator-name = "pm8450_s3";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <600000>;
-		};
-
-		pm8450_l2: ldo2 {
-			regulator-name = "pm8450_l2";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pm8450_l3: ldo3 {
-			regulator-name = "pm8450_l3";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pmr735a-rpmh-regulators {
-		compatible = "qcom,pmr735a-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-
-		vdd-l1-l2-supply = <&pmr735a_s2>;
-		vdd-l3-supply = <&pmr735a_s1>;
-		vdd-l4-supply = <&pm8350c_s1>;
-		vdd-l5-l6-supply = <&pm8350c_s1>;
-		vdd-l7-bob-supply = <&vreg_bob>;
-
-		pmr735a_s1: smps1 {
-			regulator-name = "pmr735a_s1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1296000>;
-		};
-
-		pmr735a_s2: smps2 {
-			regulator-name = "pmr735a_s2";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1040000>;
-		};
-
-		pmr735a_s3: smps3 {
-			regulator-name = "pmr735a_s3";
-			regulator-min-microvolt = <435000>;
-			regulator-max-microvolt = <2352000>;
-		};
-
-		pmr735a_l1: ldo1 {
-			regulator-name = "pmr735a_l1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		pmr735a_l2: ldo2 {
-			regulator-name = "pmr735a_l2";
-			regulator-min-microvolt = <480000>;
-			regulator-max-microvolt = <912000>;
-		};
-
-		pmr735a_l3: ldo3 {
-			regulator-name = "pmr735a_l3";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pmr735a_l4: ldo4 {
-			regulator-name = "pmr735a_l4";
-			regulator-min-microvolt = <1776000>;
-			regulator-max-microvolt = <1776000>;
-		};
-
-		pmr735a_l5: ldo5 {
-			regulator-name = "pmr735a_l5";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-		};
-
-		pmr735a_l6: ldo6 {
-			regulator-name = "pmr735a_l6";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pmr735a_l7: ldo7 {
-			regulator-name = "pmr735a_l7";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-	};
-};
-
-&gpi_dma0 {
-	status = "okay";
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpi_dma2 {
-	status = "okay";
-};
-
-/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */
-
-&i2c5 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* Dialog SLG51000 CMIC @ 75 */
-};
-
-&i2c9 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* NXP SN1X0 NFC @ 28 */
-};
-
-&i2c13 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* Richwave RTC6226 FM Radio Receiver @ 64 */
-};
-
-&i2c14 {
-	clock-frequency = <1000000>;
-	status = "okay";
-
-	cs35l41_l: speaker-amp@40 {
-		compatible = "cirrus,cs35l41";
-		reg = <0x40>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
-		cirrus,boost-peak-milliamp = <4000>;
-		cirrus,boost-ind-nanohenry = <1000>;
-		cirrus,boost-cap-microfarad = <15>;
-		cirrus,gpio2-src-select = <2>;
-		cirrus,gpio2-output-enable;
-		cirrus,asp-sdout-hiz = <3>;
-		#sound-dai-cells = <1>;
-	};
-
-	cs35l41_r: speaker-amp@41 {
-		compatible = "cirrus,cs35l41";
-		reg = <0x41>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
-		cirrus,boost-peak-milliamp = <4000>;
-		cirrus,boost-ind-nanohenry = <1000>;
-		cirrus,boost-cap-microfarad = <15>;
-		cirrus,gpio2-src-select = <2>;
-		cirrus,gpio2-output-enable;
-		cirrus,asp-sdout-hiz = <3>;
-		#sound-dai-cells = <1>;
-	};
-};
-
-&i2c15 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	/* AMS TCS3490 RGB+IR color sensor @ 72 */
-};
-
-&i2c19 {
-	clock-frequency = <1000000>;
-	status = "okay";
-
-	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
-};
-
-&pcie0 {
-	max-link-speed = <2>;
-	status = "okay";
-};
-
-&pcie0_phy {
-	vdda-phy-supply = <&pm8350_l5>;
-	vdda-pll-supply = <&pm8350_l6>;
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/adsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/cdsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_slpi {
-	firmware-name = "qcom/slpi.mbn";
-	status = "okay";
-};
-
-&qupv3_id_0 {
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&qupv3_id_2 {
-	status = "okay";
-};
-
-&sdhc_2 {
-	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
-	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
-	vmmc-supply = <&pm8350c_l9>;
-	vqmmc-supply = <&pm8350c_l6>;
-	/* Forbid SDR104/SDR50 - broken hw! */
-	sdhci-caps-mask = <0x3 0x0>;
-	no-sdio;
-	no-mmc;
-	status = "okay";
-};
-
-&spi10 {
-	status = "okay";
-
-	/* NXP SN1X0 NFC Secure Element @ 0 */
 };
 
 &tlmm {
-	gpio-reserved-ranges = <28 4>;
-
-	sdc2_default_state: sdc2-default-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "sdc2_cmd";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "sdc2_data";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	ts_int_default: ts-int-default-state {
-		pins = "gpio23";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		input-enable;
-	};
-
-	sdc2_card_det_n: sd-card-det-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-};
-
-&uart7 {
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&pm8350_l5>;
-	vdda18-supply = <&pm8350c_l1>;
-	vdda33-supply = <&pm8350_l2>;
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&pm8350_l6>;
-	vdda-pll-supply = <&pm8350_l1>;
-	status = "okay";
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "PM8010_2_RESET_N",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "NC",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "TOF_RST_N",
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN", /* GPIO_160 */
+			  "QLINK1_WMSS_RESET_N",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
new file mode 100644
index 000000000000..13c2fc4bccfc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 5 IV";
+	compatible = "sony,pdx224", "qcom,sm8450";
+
+	imx563_vdig_vreg: imx563-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx563_vdig_vreg";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
+			  "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
+			  "TELE_SPI_CLK",
+			  "TELE_SPI_CS_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "UWIDEC_PWR_EN",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC", /* GPIO_160 */
+			  "NC",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
new file mode 100644
index 000000000000..38256226d229
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		adsp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: memory@9fd00000 {
+			reg = <0x0 0x9fd00000 0x0 0x700000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f3300000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf3300000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x200000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+
+	/* Sadly, the voltages for these GPIO regulators are unknown. */
+	imx650_vana_vreg: imx650-vana-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx650_vana_vreg";
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s12>;
+
+		/*
+		 * ARC regulators:
+		 * s5 - gfx.lvl
+		 * l8 - lcx.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		/*
+		 * ARC regulators:
+		 * s2 - mxc.lvl
+		 * s4 - mss.lvl
+		 * s6 - cx.lvl
+		 */
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8450-rpmh-regulators {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		/*
+		 * ARC regulators:
+		 * S2 - ebi.lvl
+		 * S4 - mmcx.lvl
+		 * S6 - mx.lvl
+		 * L1 - lmx.lvl
+		 */
+
+		pm8450_s3: smps3 {
+			regulator-name = "pm8450_s3";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <600000>;
+		};
+
+		pm8450_l2: ldo2 {
+			regulator-name = "pm8450_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8450_l3: ldo3 {
+			regulator-name = "pm8450_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pmr735a-rpmh-regulators {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <435000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 0x2008>;
+		vdd-supply = <&pm8350c_l2>;
+		avdd-supply = <&pm8350c_l3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_default &ts_int_default>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c14 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c19 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&pcie0 {
+	max-link-speed = <2>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8350/Sony/nagara/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	firmware-name = "qcom/sm8350/Sony/nagara/slpi.mbn";
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi10 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..570475040d95 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -7,12 +7,15 @@
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
+#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -51,6 +54,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -70,6 +74,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -86,6 +91,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -102,6 +108,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -118,6 +125,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -134,6 +142,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -151,6 +160,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -167,6 +177,7 @@
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -730,7 +741,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -791,7 +802,6 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -831,7 +841,6 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -871,7 +880,6 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -911,7 +919,6 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -951,7 +958,6 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1004,7 +1010,6 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1044,7 +1049,6 @@
 				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
-				spi-max-frequency = <50000000>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
 						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
 				interconnect-names = "qup-core", "qup-config";
@@ -1058,7 +1062,7 @@
 		};
 
 		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1394,7 +1398,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8450-gpi-dma";
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0xa00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
@@ -2095,9 +2099,212 @@
 			};
 		};
 
+		wsa2macro: codec@31e0000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x031e0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA2 */
+		swr4: soundwire-controller@31f0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x031f0000 0 0x2000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsa2macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		rxmacro: codec@3200000 {
+			compatible = "qcom,sm8450-lpass-rx-macro";
+			reg = <0 0x3200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x3210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		txmacro: codec@3220000 {
+			compatible = "qcom,sm8450-lpass-tx-macro";
+			reg = <0 0x3220000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA */
+		swr0: soundwire-controller@3250000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03250000 0 0x2000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr2: soundwire-controller@33b0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x33b0000 0 0x2000>;
+			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wake";
+
+			clocks = <&vamacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		vamacro: codec@33f0000 {
+			compatible = "qcom,sm8450-lpass-va-macro";
+			reg = <0 0x033f0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@30000000 {
 			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x030000000 0 0x100>;
+			reg = <0 0x30000000 0 0x100>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2133,6 +2340,45 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -2163,7 +2409,7 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x032300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x1400000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2283,8 +2529,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 0>,
-					<&rpmhpd 12>;
+			power-domains = <&rpmhpd SM8450_CX>,
+					<&rpmhpd SM8450_MSS>;
 			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
@@ -2307,6 +2553,84 @@
 			};
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac15000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8450-cci";
+			reg = <0 0xac16000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8450-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -2322,6 +2646,33 @@
 			status = "disabled";
 		};
 
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8450-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <0>, /* dsi0 */
+				 <0>,
+				 <0>, /* dsi1 */
+				 <0>,
+				 <0>, /* dp0 */
+				 <0>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd SM8450_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8450-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -2384,6 +2735,26 @@
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
 			sdc2_sleep_state: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";
@@ -2404,6 +2775,70 @@
 				};
 			};
 
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			pcie0_default_state: pcie0-default-state {
 				perst-pins {
 					pins = "gpio94";
@@ -2800,6 +3235,123 @@
 
 		};
 
+		lpass_tlmm: pinctrl@3440000{
+			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+			reg = <0 0x3440000 0x0 0x20000>,
+			      <0 0x34d0000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -2999,6 +3551,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
 					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -3075,6 +3628,7 @@
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		gem_noc: interconnect@19100000 {
@@ -3161,16 +3715,16 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
 
-		sdhc_2: sdhci@8804000 {
+		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
@@ -3192,6 +3746,9 @@
 			bus-width = <4>;
 			dma-coherent;
 
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
 			status = "disabled";
 
 			sdhc2_opp_table: opp-table {
@@ -3274,6 +3831,9 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <0>;
diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi
index dfbe35bf46e0..7c34d14dcd7e 100644
--- a/arch/arm64/boot/dts/renesas/condor-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi
@@ -21,6 +21,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 	};
 
 	d1_8v: regulator-2 {
diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dts b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
index 258f8668ca36..258f8668ca36 100644
--- a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dts
+++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index ed9400f903c9..41fbb9998cf8 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -656,7 +656,7 @@
 
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
@@ -704,7 +704,7 @@
 
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6810000 0 0x800>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
@@ -752,7 +752,7 @@
 
 		avb2: ethernet@e6820000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6820000 0 0x1000>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
@@ -800,7 +800,7 @@
 
 		avb3: ethernet@e6830000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6830000 0 0x1000>;
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
@@ -848,7 +848,7 @@
 
 		avb4: ethernet@e6840000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6840000 0 0x1000>;
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
@@ -896,7 +896,7 @@
 
 		avb5: ethernet@e6850000 {
 			compatible = "renesas,etheravb-r8a779a0",
-				     "renesas,etheravb-rcar-gen3";
+				     "renesas,etheravb-rcar-gen4";
 			reg = <0 0xe6850000 0 0x1000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
@@ -1019,7 +1019,7 @@
 
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6e90000 0 0x0064>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 618>;
@@ -1034,7 +1034,7 @@
 
 		msiof1: spi@e6ea0000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 619>;
@@ -1049,7 +1049,7 @@
 
 		msiof2: spi@e6c00000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c00000 0 0x0064>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 620>;
@@ -1064,7 +1064,7 @@
 
 		msiof3: spi@e6c10000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c10000 0 0x0064>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
@@ -1079,7 +1079,7 @@
 
 		msiof4: spi@e6c20000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c20000 0 0x0064>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
@@ -1094,7 +1094,7 @@
 
 		msiof5: spi@e6c28000 {
 			compatible = "renesas,msiof-r8a779a0",
-				     "renesas,rcar-gen3-msiof";
+				     "renesas,rcar-gen4-msiof";
 			reg = <0 0xe6c28000 0 0x0064>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index a45df1041705..045d70535519 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -12,13 +12,13 @@
 	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
 
 	aliases {
-		serial0 = &scif3;
+		serial0 = &hscif0;
 		serial1 = &scif0;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
+		stdout-path = "serial0:1843200n8";
 	};
 
 	memory@48000000 {
@@ -59,6 +59,14 @@
 	clock-frequency = <32768>;
 };
 
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &i2c4 {
 	pinctrl-0 = <&i2c4_pins>;
 	pinctrl-names = "default";
@@ -99,6 +107,11 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
 	i2c4_pins: i2c4 {
 		groups = "i2c4";
 		function = "i2c4";
@@ -115,11 +128,6 @@
 		function = "scif0";
 	};
 
-	scif3_pins: scif3 {
-		groups = "scif3_data", "scif3_ctrl";
-		function = "scif3";
-	};
-
 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
@@ -139,14 +147,6 @@
 	status = "okay";
 };
 
-&scif3 {
-	pinctrl-0 = <&scif3_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
 &scif_clk {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
index 15e8d1ebf575..33c1015e9ab3 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -5,6 +5,10 @@
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
 
+&eth_serdes {
+	status = "okay";
+};
+
 &i2c4 {
 	eeprom@52 {
 		compatible = "rohm,br24g01", "atmel,24c01";
@@ -13,3 +17,89 @@
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		power-source = <1800>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		power-source = <1800>;
+	};
+
+	tsn2_pins: tsn2 {
+		groups = "tsn2_mdio_b", "tsn2_link_b";
+		function = "tsn2";
+		power-source = <1800>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&u101>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u101: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@1 {
+			reg = <1>;
+			phy-handle = <&u201>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u201: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@2 {
+			reg = <2>;
+			phy-handle = <&u301>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u301: ethernet-phy@3 {
+					reg = <3>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index c2f152bcf10e..67a4f2d4480d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -469,6 +469,16 @@
 			status = "disabled";
 		};
 
+		eth_serdes: phy@e6444000 {
+			compatible = "renesas,r8a779f0-ether-serdes";
+			reg = <0 0xe6444000 0 0x2800>;
+			clocks = <&cpg CPG_MOD 1506>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1506>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779f0",
 				     "renesas,rcar-gen4-i2c";
@@ -577,7 +587,7 @@
 			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
@@ -594,7 +604,7 @@
 			reg = <0 0xe6550000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 515>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
@@ -611,7 +621,7 @@
 			reg = <0 0xe6560000 0 0x60>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
@@ -628,7 +638,7 @@
 			reg = <0 0xe66a0000 0 0x60>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 517>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
@@ -651,13 +661,113 @@
 			status = "disabled";
 		};
 
+		rswitch: ethernet@e6880000 {
+			compatible = "renesas,r8a779f0-ether-switch";
+			reg = <0 0xe6880000 0 0x20000>, <0 0xe68c0000 0 0x20000>;
+			reg-names = "base", "secure_base";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mfwd_error", "race_error",
+					  "coma_error", "gwca0_error",
+					  "gwca1_error", "etha0_error",
+					  "etha1_error", "etha2_error",
+					  "gptp0_status", "gptp1_status",
+					  "mfwd_status", "race_status",
+					  "coma_status", "gwca0_status",
+					  "gwca1_status", "etha0_status",
+					  "etha1_status", "etha2_status",
+					  "rmac0_status", "rmac1_status",
+					  "rmac2_status",
+					  "gwca0_rxtx0", "gwca0_rxtx1",
+					  "gwca0_rxtx2", "gwca0_rxtx3",
+					  "gwca0_rxtx4", "gwca0_rxtx5",
+					  "gwca0_rxtx6", "gwca0_rxtx7",
+					  "gwca1_rxtx0", "gwca1_rxtx1",
+					  "gwca1_rxtx2", "gwca1_rxtx3",
+					  "gwca1_rxtx4", "gwca1_rxtx5",
+					  "gwca1_rxtx6", "gwca1_rxtx7",
+					  "gwca0_rxts0", "gwca0_rxts1",
+					  "gwca1_rxts0", "gwca1_rxts1",
+					  "rmac0_mdio", "rmac1_mdio",
+					  "rmac2_mdio",
+					  "rmac0_phy", "rmac1_phy",
+					  "rmac2_phy";
+			clocks = <&cpg CPG_MOD 1505>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1505>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phys = <&eth_serdes 0>;
+				};
+				port@1 {
+					reg = <1>;
+					phys = <&eth_serdes 1>;
+				};
+				port@2 {
+					reg = <2>;
+					phys = <&eth_serdes 2>;
+				};
+			};
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a779f0",
 				     "renesas,rcar-gen4-scif", "renesas,scif";
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
@@ -674,7 +784,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
@@ -691,7 +801,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
@@ -708,7 +818,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
index 895f0bd9f754..c10740aee9f6 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -96,6 +96,24 @@
 		device_type = "memory";
 		reg = <0x6 0x00000000 0x1 0x00000000>;
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &avb0 {
@@ -135,6 +153,17 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	eeprom@50 {
 		compatible = "rohm,br24g01", "atmel,24c01";
 		label = "cpu-board";
@@ -143,6 +172,23 @@
 	};
 };
 
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
@@ -180,17 +226,56 @@
 		bias-pull-up;
 	};
 
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
 	};
 };
 
-&scif_clk {
-	clock-frequency = <24000000>;
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
 };
 
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d70f0600ae5a..45d8d927ad26 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -14,18 +14,138 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a76_0>;
+				};
+				core1 {
+					cpu = <&a76_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a76_2>;
+				};
+				core1 {
+					cpu = <&a76_3>;
+				};
+			};
+		};
+
 		a76_0: cpu@0 {
 			compatible = "arm,cortex-a76";
 			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc R8A779G0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_1: cpu@100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_2: cpu@10000 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_3: cpu@10100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+	       };
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA76_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -214,6 +334,76 @@
 			#interrupt-cells = <2>;
 		};
 
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779g0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a779g0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x4000>;
@@ -235,12 +425,96 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779g0",
 				     "renesas,rcar-gen4-i2c";
 			reg = <0 0xe6500000 0 0x40>;
 			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 518>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -255,6 +529,9 @@
 			reg = <0 0xe6508000 0 0x40>;
 			interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 519>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -269,6 +546,9 @@
 			reg = <0 0xe6510000 0 0x40>;
 			interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 520>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -283,6 +563,9 @@
 			reg = <0 0xe66d0000 0 0x40>;
 			interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 521>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -297,6 +580,9 @@
 			reg = <0 0xe66d8000 0 0x40>;
 			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 522>;
+			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 522>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -311,6 +597,9 @@
 			reg = <0 0xe66e0000 0 0x40>;
 			interrupts = <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 523>;
 			i2c-scl-internal-delay-ns = <110>;
@@ -321,19 +610,72 @@
 
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a779g0",
-				     "renesas,rcar-gen4-hscif",
-				     "renesas,hscif";
-			reg = <0 0xe6540000 0 96>;
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 514>;
 			status = "disabled";
 		};
 
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
@@ -475,6 +817,381 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@e6e37000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e37000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@e6e38000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e38000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@e6e39000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e39000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779g0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			dmas = <&dmac0 0x49>, <&dmac0 0x48>,
+			       <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			dmas = <&dmac0 0x4b>, <&dmac0 0x4a>,
+			       <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -483,7 +1200,7 @@
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
 			interrupts = <GIC_PPI 9
-				      (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+				      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		prr: chipid@fff00044 {
@@ -494,9 +1211,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index 689aa4ba416b..3f7d451b1199 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -1,11 +1,10 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2UL SoC
+ * Device Tree Source for the RZ/Five and RZ/G2UL SoCs
  *
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/r9a07g043-cpg.h>
 
 / {
@@ -69,36 +68,8 @@
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a55";
-			reg = <0>;
-			device_type = "cpu";
-			#cooling-cells = <2>;
-			next-level-cache = <&L3_CA55>;
-			enable-method = "psci";
-			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		L3_CA55: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x40000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -107,10 +78,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x10049c00 0 0x400>;
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(329) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
@@ -128,10 +99,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a000 0 0x400>;
-			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(333) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
@@ -149,10 +120,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(335) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(336) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
@@ -170,10 +141,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a800 0 0x400>;
-			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(341) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
@@ -190,9 +161,9 @@
 		spi0: spi@1004ac00 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004ac00 0 0x400>;
-			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(415) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(413) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(414) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
 			resets = <&cpg R9A07G043_RSPI0_RST>;
@@ -208,9 +179,9 @@
 		spi1: spi@1004b000 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b000 0 0x400>;
-			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(418) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(416) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(417) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
 			resets = <&cpg R9A07G043_RSPI1_RST>;
@@ -226,9 +197,9 @@
 		spi2: spi@1004b400 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b400 0 0x400>;
-			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(421) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(419) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(420) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
 			resets = <&cpg R9A07G043_RSPI2_RST>;
@@ -245,12 +216,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004b800 0 0x400>;
-			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(380) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(382) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(383) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(381) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
@@ -264,12 +235,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004bc00 0 0x400>;
-			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(385) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(387) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(388) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(386) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
@@ -283,12 +254,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c000 0 0x400>;
-			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(390) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(392) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(393) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(391) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
@@ -302,12 +273,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c400 0 0x400>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(395) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(397) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(398) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(396) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
@@ -321,12 +292,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c800 0 0x400>;
-			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(400) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(402) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(403) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(401) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
@@ -339,10 +310,10 @@
 		sci0: serial@1004d000 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d000 0 0x400>;
-			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(405) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(406) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(407) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(408) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
 			clock-names = "fck";
@@ -354,10 +325,10 @@
 		sci1: serial@1004d400 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d400 0 0x400>;
-			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(409) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(410) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(411) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(412) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
 			clock-names = "fck";
@@ -369,14 +340,14 @@
 		canfd: can@10050000 {
 			compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
 			reg = <0 0x10050000 0 0x8000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(426) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(427) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(422) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(424) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(428) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(423) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(425) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(429) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "g_err", "g_recc",
 					  "ch0_err", "ch0_rec", "ch0_trx",
 					  "ch1_err", "ch1_rec", "ch1_trx";
@@ -405,14 +376,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058000 0 0x400>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(350) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(348) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(349) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(352) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(353) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(351) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(354) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(355) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
@@ -427,14 +398,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058400 0 0x400>;
-			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(358) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(356) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(357) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(360) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(361) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(359) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(362) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(363) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
@@ -449,14 +420,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058800 0 0x400>;
-			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(366) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(364) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(365) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(368) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(369) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(367) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(370) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(371) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
@@ -471,14 +442,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058c00 0 0x400>;
-			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(374) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(372) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(373) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(376) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(377) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(375) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(378) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(379) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
@@ -491,7 +462,7 @@
 		adc: adc@10059000 {
 			compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
 			reg = <0 0x10059000 0 0x400>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(347) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
 				 <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
 			clock-names = "adclk", "pclk";
@@ -551,12 +522,6 @@
 		sysc: system-controller@11020000 {
 			compatible = "renesas,r9a07g043-sysc";
 			reg = <0 0x11020000 0 0x10000>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "lpm_int", "ca55stbydone_int",
-					  "cm33stbyr_int", "ca55_deny";
 			status = "disabled";
 		};
 
@@ -578,23 +543,23 @@
 				     "renesas,rz-dmac";
 			reg = <0 0x11820000 0 0x10000>,
 			      <0 0x11830000 0 0x10000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(141) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(125) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(126) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(127) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(128) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(129) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(130) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(132) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(133) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(134) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(135) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(136) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(137) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(138) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(139) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(140) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -609,22 +574,12 @@
 			dma-channels = <16>;
 		};
 
-		gic: interrupt-controller@11900000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x0 0x11900000 0 0x40000>,
-			      <0x0 0x11940000 0 0x60000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
-		};
-
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
@@ -639,8 +594,8 @@
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
@@ -655,9 +610,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c20000 0 0x10000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(85) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(86) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
@@ -675,9 +630,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c30000 0 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(87) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(88) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(89) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
@@ -705,7 +660,7 @@
 		ohci0: usb@11c50000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c50000 0 0x100>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -719,7 +674,7 @@
 		ohci1: usb@11c70000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c70000 0 0x100>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(96) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -733,7 +688,7 @@
 		ehci0: usb@11c50100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c50100 0 0x100>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -748,7 +703,7 @@
 		ehci1: usb@11c70100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c70100 0 0x100>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(97) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -764,7 +719,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c50200 0 0x700>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(94) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>;
@@ -777,7 +732,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c70200 0 0x700>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(99) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>;
@@ -790,10 +745,10 @@
 			compatible = "renesas,usbhs-r9a07g043",
 				     "renesas,rza2-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(102) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(103) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
 			resets = <&phyrst 0>,
@@ -812,34 +767,19 @@
 			clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
 			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(49) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "wdt", "perrout";
 			resets = <&cpg R9A07G043_WDT0_PRESETN>;
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g043-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G043_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G043_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G043_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801000 0x0 0x400>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
 			resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
 			power-domains = <&cpg>;
@@ -850,7 +790,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801400 0x0 0x400>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
 			resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
 			power-domains = <&cpg>;
@@ -861,7 +801,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801800 0x0 0x400>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(48) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
 			resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
 			power-domains = <&cpg>;
@@ -899,12 +839,4 @@
 			};
 		};
 	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
new file mode 100644
index 000000000000..6af5f3bca2d1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI nr
+
+#include "r9a07g043.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&soc {
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@11900000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x11900000 0 0x40000>,
+		      <0x0 0x11940000 0 0x60000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sysc {
+	interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "lpm_int", "ca55stbydone_int",
+			  "cm33stbyr_int", "ca55_deny";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
index 059885a01ede..01483b4302c2 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -17,7 +17,7 @@
 #define SW_SW0_DEV_SEL	1
 #define SW_ET0_EN_N	1
 
-#include "r9a07g043.dtsi"
+#include "r9a07g043u.dtsi"
 #include "rzg2ul-smarc-som.dtsi"
 #include "rzg2ul-smarc.dtsi"
 
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 2283d4fb8736..487536696d90 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -109,6 +109,7 @@
 			compatible = "cache";
 			cache-unified;
 			cache-size = <0x40000>;
+			cache-level = <3>;
 		};
 	};
 
@@ -644,7 +645,6 @@
 			reg = <0 0x11030000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			#address-cells = <2>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&irqc>;
 			interrupt-controller;
@@ -994,21 +994,6 @@
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g044-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G044_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G044_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G044_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g044-ostm",
 				     "renesas,ostm";
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index fc34058002e2..f67a6f125d9c 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -6,7 +6,37 @@
  */
 
 /dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL	1
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
 #include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 358d4c34465f..304ade54425b 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -109,6 +109,7 @@
 			compatible = "cache";
 			cache-unified;
 			cache-size = <0x40000>;
+			cache-level = <3>;
 		};
 	};
 
@@ -650,7 +651,6 @@
 			reg = <0 0x11030000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			#address-cells = <2>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&irqc>;
 			interrupt-controller;
@@ -1000,21 +1000,6 @@
 			status = "disabled";
 		};
 
-		wdt2: watchdog@12800400 {
-			compatible = "renesas,r9a07g054-wdt",
-				     "renesas,rzg2l-wdt";
-			reg = <0 0x12800400 0 0x400>;
-			clocks = <&cpg CPG_MOD R9A07G054_WDT2_PCLK>,
-				 <&cpg CPG_MOD R9A07G054_WDT2_CLK>;
-			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "wdt", "perrout";
-			resets = <&cpg R9A07G054_WDT2_PRESETN>;
-			power-domains = <&cpg>;
-			status = "disabled";
-		};
-
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g054-ostm",
 				     "renesas,ostm";
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index 5c15d73d059f..11e1d51c7c0e 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -83,3 +83,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&wdt0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index fb1a97202c38..0373ec409d54 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -37,8 +37,15 @@
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA53>;
 			clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>;
 		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	soc: soc {
@@ -48,7 +55,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@82000000 {
+		gic: interrupt-controller@82010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
@@ -123,10 +130,15 @@
 			#power-domain-cells = <0>;
 		};
 
+		sys: system-controller@a3f03000 {
+			compatible = "renesas,r9a09g011-sys";
+			reg = <0 0xa3f03000 0 0x400>;
+		};
+
 		i2c0: i2c@a4030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030000 0 0x80>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
@@ -140,7 +152,7 @@
 		i2c2: i2c@a4030100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030100 0 0x80>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
@@ -161,6 +173,19 @@
 			status = "disabled";
 		};
 
+		wdt0: watchdog@a4050000 {
+			compatible = "renesas,r9a09g011-wdt",
+				     "renesas,rzv2m-wdt";
+			reg = <0 0xa4050000 0 0x80>;
+			clocks = <&cpg CPG_MOD R9A09G011_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A09G011_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cpg R9A09G011_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		pinctrl: pinctrl@b6250000 {
 			compatible = "renesas,r9a09g011-pinctrl";
 			reg = <0 0xb6250000 0 0x800>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index c4faff092380..fbbb4f03440b 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -351,8 +351,3 @@
 	status = "okay";
 	timeout-sec = <60>;
 };
-
-&wdt2 {
-	status = "okay";
-	timeout-sec = <60>;
-};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 78e6e2376b01..8a0d56872de7 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -276,8 +276,3 @@
 	status = "okay";
 	timeout-sec = <60>;
 };
-
-&wdt2 {
-	status = "okay";
-	timeout-sec = <60>;
-};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 6be25a8a28db..b6bd27196d88 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -8,37 +8,9 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/*
- * DIP-Switch SW1 setting on SoM
- * 1 : High; 0: Low
- * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
- * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
- * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
- * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
- * Please change below macros according to SW1 setting
- */
-
-#define SW_SD0_DEV_SEL	1
-
-#define SW_SCIF_CAN	0
-#if (SW_SCIF_CAN)
-/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
-#define SW_RSPI_CAN	0
-#else
-/* Please set SW_RSPI_CAN. Default value is 1 */
-#define SW_RSPI_CAN	1
-#endif
-
-#if (SW_SCIF_CAN && SW_RSPI_CAN)
-#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
-#endif
-
-#include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"
 
-/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
-#define PMOD1_SER0	1
 
 / {
 	aliases {
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
index bd8bc858c28c..58923dc83faa 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -99,6 +99,13 @@
 		input-enable;
 	};
 
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
+			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
+	};
+
 	ssi1_pins: ssi1 {
 		pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
 			 <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 2a0feb53f0dc..931efc07d6fb 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -221,13 +221,6 @@
 			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
 		};
 	};
-
-	spi1_pins: rspi1 {
-		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
-			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
-			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
-			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
-	};
 };
 
 #if (SW_SW0_DEV_SEL)
diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
index c83a30adc6ad..c83a30adc6ad 100644
--- a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts
+++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8c15593c0ca4..0a76a2ebb5f6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -3,11 +3,15 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
@@ -62,13 +66,19 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 07008d84434c..c1bbd555f5f5 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -30,31 +30,31 @@
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		esc-key {
+		button-esc {
 			label = "esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1310000>;
 		};
 
-		home-key {
+		button-home {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <624000>;
 		};
 
-		menu-key {
+		button-menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <987000>;
 		};
 
-		vol-down-key {
+		button-down {
 			label = "volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			label = "volume up";
 			linux,code = <KEY_VOLUMEUP>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
new file mode 100644
index 000000000000..08a3ad3e7ae9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30-ringneck.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
+	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
+
+	aliases {
+		mmc2 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-slp-btn-n {
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wake-n {
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdda_codec: vdda-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+		VDDD-supply = <&vddd_codec>;
+	};
+};
+
+&i2c3 {
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pinctrl {
+	haikou {
+		haikou_keys_pin: haikou-keys-pin {
+			rockchip,pins =
+			  /* WAKE# */
+			  <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* LID_BTN */
+			  <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
new file mode 100644
index 000000000000..12397755830b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdio;
+		rtc0 = &rtc_twi;
+		rtc1 = &rk809;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+		status = "okay";
+
+		module_led: led-0 {
+			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	vcc5v0_sys: vccsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+
+	status = "okay";
+};
+
+/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
+&gmac {
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	phy-supply = <&vcc_3v3>;
+	clock_in_out = "output";
+};
+
+&gpio2 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+	 * eMMC powered-down initially (in fact it keeps the reset signal
+	 * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+	 * the SPL has been booted from SD Card.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "bios_disable_override";
+		gpio-hog;
+	};
+
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
+	 * represents the state of a switch on the baseboard.
+	 */
+	bios-disable-n-hog {
+		gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+		line-name = "bios_disable";
+		input;
+		gpio-hog;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* SE05x is limited to Fast Mode */
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	rockchip,trcm-sync-tx-only;
+
+	pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
+		     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	vccio-oscgpi-supply = <&vcc_3v3>;
+
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+/* Mule UCAN */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9fe9b0d11003..184b84fdde07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -23,7 +23,7 @@
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		func-key {
+		button-func {
 			linux,code = <KEY_FN>;
 			label = "function";
 			press-threshold-microvolt = <18000>;
@@ -37,31 +37,31 @@
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		esc-key {
+		button-esc {
 			linux,code = <KEY_MICMUTE>;
 			label = "micmute";
 			press-threshold-microvolt = <1130000>;
 		};
 
-		home-key {
+		button-home {
 			linux,code = <KEY_MODE>;
 			label = "mode";
 			press-threshold-microvolt = <901000>;
 		};
 
-		menu-key {
+		button-menu {
 			linux,code = <KEY_PLAY>;
 			label = "play";
 			press-threshold-microvolt = <624000>;
 		};
 
-		vol-down-key {
+		button-down {
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index ea6820902ede..7ea48167747c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 2dfa67f1cd67..dd228a256a32 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -96,6 +96,7 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 43c928ac98f0..1deef53a4c94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -25,7 +25,7 @@
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
new file mode 100644
index 000000000000..61b31688b469
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 000000000000..fbc6bfbaa5c1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		btn_f1: button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		btn_f2: button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		btn_f3: button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		btn_f4: button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		btn_f5: button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		btn_f6: button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 000000000000..139c898e590e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+			};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 72899a714310..4702183b673c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -2,30 +2,21 @@
 /*
  * Copyright (c) 2019 Hardkernel Co., Ltd
  * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
+#include "rk3326-odroid-go.dtsi"
 
 / {
 	model = "ODROID-GO Advance";
 	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
 
-	aliases {
-		mmc0 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	adc-joystick {
+	analog_sticks: adc-joystick {
 		compatible = "adc-joystick";
 		io-channels = <&saradc 1>,
 			      <&saradc 2>;
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -46,12 +37,6 @@
 		};
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_bl>;
-		pwms = <&pwm1 0 25000 0>;
-	};
-
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3000000>;
@@ -63,606 +48,19 @@
 		voltage-min-design-microvolt = <3500000>;
 
 		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =	<4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
 					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
 					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
 					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
 					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
 					<3574170 0>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&btn_pins>;
-
-		/*
-		 *      *** ODROIDGO2-Advance Switch layout ***
-		 * |------------------------------------------------|
-		 * | sw15                                      sw16 |
-		 * |------------------------------------------------|
-		 * |     sw1      |-------------------|      sw8    |
-		 * |  sw3   sw4   |                   |   sw7   sw5 |
-		 * |     sw2      |    LCD Display    |      sw6    |
-		 * |              |                   |             |
-		 * |              |-------------------|             |
-		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
-		 * |------------------------------------------------|
-		 */
-
-		button-sw1 {
-			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
-			label = "DPAD-UP";
-			linux,code = <BTN_DPAD_UP>;
-		};
-		button-sw2 {
-			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
-			label = "DPAD-DOWN";
-			linux,code = <BTN_DPAD_DOWN>;
-		};
-		button-sw3 {
-			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
-			label = "DPAD-LEFT";
-			linux,code = <BTN_DPAD_LEFT>;
-		};
-		button-sw4 {
-			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
-			label = "DPAD-RIGHT";
-			linux,code = <BTN_DPAD_RIGHT>;
-		};
-		button-sw5 {
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "BTN-A";
-			linux,code = <BTN_EAST>;
-		};
-		button-sw6 {
-			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "BTN-B";
-			linux,code = <BTN_SOUTH>;
-		};
-		button-sw7 {
-			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "BTN-Y";
-			linux,code = <BTN_WEST>;
-		};
-		button-sw8 {
-			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "BTN-X";
-			linux,code = <BTN_NORTH>;
-		};
-		button-sw9 {
-			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
-			label = "F1";
-			linux,code = <BTN_TRIGGER_HAPPY1>;
-		};
-		button-sw10 {
-			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "F2";
-			linux,code = <BTN_TRIGGER_HAPPY2>;
-		};
-		button-sw11 {
-			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "F3";
-			linux,code = <BTN_TRIGGER_HAPPY3>;
-		};
-		button-sw12 {
-			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
-			label = "F4";
-			linux,code = <BTN_TRIGGER_HAPPY4>;
-		};
-		button-sw13 {
-			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
-			label = "F5";
-			linux,code = <BTN_TRIGGER_HAPPY5>;
-		};
-		button-sw14 {
-			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "F6";
-			linux,code = <BTN_TRIGGER_HAPPY6>;
-		};
-		button-sw15 {
-			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "TOP-LEFT";
-			linux,code = <BTN_TL>;
-		};
-		button-sw16 {
-			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "TOP-RIGHT";
-			linux,code = <BTN_TR>;
-		};
-	};
-
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		blue_led: led-0 {
-			label = "blue:heartbeat";
-			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	rk817-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Analog";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Speaker", "SPKO";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_2ch>;
-		};
-	};
-
-	vccsys: vccsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v8_sys";
-		regulator-always-on;
-		regulator-min-microvolt = <3800000>;
-		regulator-max-microvolt = <3800000>;
-	};
-
-	vcc_host: vcc_host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_host";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&usb_midu>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cru {
-	assigned-clocks = <&cru PLL_NPLL>,
-		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
-		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
-		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
-		<&cru PLL_CPLL>;
-
-	assigned-clock-rates = <1188000000>,
-		<200000000>, <200000000>,
-		<150000000>, <150000000>,
-		<100000000>, <200000000>,
-		<17000000>;
 };
 
-&display_subsystem {
-	status = "okay";
+&internal_display {
+	compatible = "elida,kd35t133";
 };
 
-&dsi {
-	status = "okay";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "elida,kd35t133";
-		reg = <0>;
-		backlight = <&backlight>;
-		iovcc-supply = <&vcc_lcd>;
-		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
-		rotation = <270>;
-		vdd-supply = <&vcc_lcd>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&dsi_dphy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_logic>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <16>;
-	i2c-scl-rising-time-ns = <280>;
-	status = "okay";
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-		vcc8-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			usb_midu: BOOST {
-				regulator-name = "usb_midu";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-
-		rk817_charger: charger {
-			monitored-battery = <&battery>;
-			rockchip,resistor-sense-micro-ohms = <10000>;
-			rockchip,sleep-enter-current-microamp = <300000>;
-			rockchip,sleep-filter-current-microamp = <100000>;
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
-	status = "okay";
-};
-
-&io_domains {
-	vccio1-supply = <&vcc_3v3>;
-	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_3v3>;
-	vccio4-supply = <&vcc_3v3>;
-	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmuio1-supply = <&vcc3v3_pmu>;
-	pmuio2-supply = <&vcc3v3_pmu>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&sdmmc {
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sfc {
-	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <2>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy {
-	status = "okay";
-
-	u2phy_host: host-port {
-		status = "okay";
-	};
-
-	u2phy_otg: otg-port {
-		status = "disabled";
-	};
-};
-
-&usb20_otg {
-	status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer &uart1_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2m1_xfer>;
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&pinctrl {
-	btns {
-		btn_pins: btn-pins {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	headphone {
-		hp_det: hp-det {
-			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	leds {
-		blue_led_pin: blue-led-pin {
-			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		dc_det: dc-det {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pmic_int: pmic-int {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		soc_slppin_gpio: soc_slppin_gpio {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-
-		soc_slppin_rst: soc_slppin_rst {
-			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
-		};
-
-		soc_slppin_slp: soc_slppin_slp {
-			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
-		};
-	};
+&rk817_charger {
+	monitored-battery = <&battery>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 000000000000..842efbaf1a6a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volume-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+/* f1 and f2 conflict with volume buttons */
+/delete-node/ &btn_f1;
+/delete-node/ &btn_f2;
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	status = "disabled";
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 49ae15708a0b..6d7a7bf72ac7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -102,6 +102,7 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
 		};
 	};
 
@@ -1025,6 +1026,17 @@
 		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	crypto: crypto@ff060000 {
+		compatible = "rockchip,rk3328-crypto";
+		reg = <0x0 0xff060000 0x0 0x4000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>,
+			 <&cru SCLK_CRYPTO>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3328-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 7f5bba0c6001..81d1064fdb21 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -208,11 +208,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		/* rtc_int is not connected */
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 38d757c00548..5589f3db6b36 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -192,11 +192,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		/* rtc_int is not connected */
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index ed3348b558f8..a47d9f758611 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -734,10 +734,6 @@ camera: &i2c7 {
 };
 
 /* PINCTRL OVERRIDES */
-&ec_ap_int_l {
-	rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
-};
-
 &ap_fw_wp {
 	rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 2a332763c35c..9d9297bc5f04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -123,7 +123,7 @@
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 452728b82e42..3bf8f959e42c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
index 72182c58cc46..65cb21837b0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 278123b4f911..b6e082f1f6d9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -167,6 +167,7 @@
 };
 
 &emmc_phy {
+	rockchip,enable-strobe-pulldown;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9e2e246e0bab..dba4d03bfc2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -52,13 +52,13 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 2e058c315025..04403a76238b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -81,6 +81,27 @@
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vcc3v3_sys>;
 	};
+
+	wifi_pwrseq: sdio-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk818 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		/*
+		 * Wait between power-on and SDIO access for CYP43455
+		 * POR circuit.
+		 */
+		post-power-on-delay-ms = <110>;
+		/*
+		 * Wait between consecutive toggles for CYP43455 CBUCK
+		 * regulator discharge.
+		 */
+		power-off-delay-us = <10000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &cpu_l0 {
@@ -360,11 +381,45 @@
 		};
 	};
 
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sound {
 		vcc1v8_codec_en: vcc1v8-codec-en {
 			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
 };
 
 &sdmmc {
@@ -393,6 +448,27 @@
 	status = "okay";
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk818 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 04c752f49be9..115c14c0a3c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -207,7 +207,7 @@
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <150000000>;
+	max-frequency = <40000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc3v3_baseboard>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index 5a2661ae0131..7ba1c28f70a9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -98,13 +98,12 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 2f4b1b2e3ac7..bbf1e3f24585 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -41,7 +41,7 @@
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index f9884902f874..309c35d7fca8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -601,6 +601,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 645ced6617a6..1f76d3501bda 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -509,7 +509,6 @@
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index 94e39ed63397..c920ddf44baf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -128,6 +128,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 13927e7d0724..dbec2b7173a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -33,13 +33,13 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 92c2207e686c..4391aea25984 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -582,6 +582,26 @@
 		status = "disabled";
 	};
 
+	crypto0: crypto@ff8b0000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
+		reset-names = "master", "lave", "crypto";
+	};
+
+	crypto1: crypto@ff8b8000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b8000 0x0 0x4000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
+		reset-names = "master", "slave", "crypto";
+	};
+
 	i2c1: i2c@ff110000 {
 		compatible = "rockchip,rk3399-i2c";
 		reg = <0x0 0xff110000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 935b8c68a71d..bf9eb0405b62 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -297,11 +297,10 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
index 7a20e2d6876a..63cff402f3a8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
@@ -5,7 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rgxx3.dtsi"
+#include "rk3566-anbernic-rg353x.dtsi"
 
 / {
 	model = "RG353P";
@@ -18,26 +18,66 @@
 		mmc3 = &sdmmc2;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_sys>;
-		pwms = <&pwm4 0 25000 0>;
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
 	};
-};
 
-&gpio_keys_control {
-	button-a {
-		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
-		label = "EAST";
-		linux,code = <BTN_EAST>;
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
 	};
 
-	button-left {
-		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
-		label = "DPAD-LEFT";
-		linux,code = <BTN_DPAD_LEFT>;
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
 	};
+};
 
+&gpio_keys_control {
 	button-r1 {
 		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
 		label = "TR";
@@ -49,27 +89,6 @@
 		label = "TR2";
 		linux,code = <BTN_TR2>;
 	};
-
-	button-right {
-		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
-		label = "DPAD-RIGHT";
-		linux,code = <BTN_DPAD_RIGHT>;
-	};
-
-	button-y {
-		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
-		label = "WEST";
-		linux,code = <BTN_WEST>;
-	};
-};
-
-&i2c0 {
-	/* This hardware is physically present but unused. */
-	power-monitor@62 {
-		compatible = "cellwise,cw2015";
-		reg = <0x62>;
-		status = "disabled";
-	};
 };
 
 &i2c2 {
@@ -78,8 +97,22 @@
 	status = "okay";
 };
 
-&pwm4 {
-	status = "okay";
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
 };
 
 &sdhci {
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
new file mode 100644
index 000000000000..885234a023e1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353V";
+	compatible = "anbernic,rg353v", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&pinctrl {
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
new file mode 100644
index 000000000000..a7dc462fe21f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353VS";
+	compatible = "anbernic,rg353vs", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
new file mode 100644
index 000000000000..65a80d1f6d91
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <1200000000>, <200000000>, <241500000>;
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&i2c0 {
+	/* This hardware is physically present but unused. */
+	power-monitor@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		status = "disabled";
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
index 3dc01549a5b4..5dafcc86296b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,25 @@
 		mmc2 = &sdmmc2;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =	<4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
 	gpio_spi: spi {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -29,6 +48,50 @@
 		cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
 	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <1200000000>, <200000000>, <500000000>;
 };
 
 &gpio_keys_control {
@@ -76,6 +139,13 @@
 };
 
 &pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gpio-spi {
 		spi_pins: spi-pins {
 			rockchip,pins =
@@ -85,3 +155,12 @@
 		};
 	};
 };
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 2b455143b86d..41262a69d33e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -22,6 +22,7 @@
 			      <&adc_mux 3>;
 		pinctrl-0 = <&joy_mux_en>;
 		pinctrl-names = "default";
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -217,37 +218,6 @@
 		};
 	};
 
-	/* Channels reversed for both headphones and speakers. */
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "anbernic_rk817";
-		simple-audio-card,aux-devs = <&spk_amp>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Internal Speakers";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Internal Speakers", "Speaker Amp OUTL",
-			"Internal Speakers", "Speaker Amp OUTR",
-			"Speaker Amp INL", "HPOL",
-			"Speaker Amp INR", "HPOR";
-		simple-audio-card,pin-switches = "Internal Speakers";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_8ch>;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk817 1>;
@@ -258,14 +228,6 @@
 		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
 	};
 
-	spk_amp: audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
-		pinctrl-0 = <&spk_amp_enable_h>;
-		pinctrl-names = "default";
-		sound-name-prefix = "Speaker Amp";
-	};
-
 	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
@@ -607,13 +569,6 @@
 };
 
 &pinctrl {
-	audio-amplifier {
-		spk_amp_enable_h: spk-amp-enable-h {
-			rockchip,pins =
-				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	gpio-btns {
 		btn_pins_ctrl: btn-pins-ctrl {
 			rockchip,pins =
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
new file mode 100644
index 000000000000..4c7f9abd594f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com
+ * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Rockchip RK3566 BOX DEMO Board";
+	compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		linux,rc-map-name = "rc-beelink-gs1";
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h &wifi_32k>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v0_dcin: regulator-vcc12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcca_1v8: regulator-vcca-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdda_0v9: regulator-vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_fixed: regulator-vdd-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_logic";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents =  <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		    &gmac1m1_tx_bus2
+		    &gmac1m1_rx_bus2
+		    &gmac1m1_rgmii_clk
+		    &gmac1m1_rgmii_bus
+		    &gmac1m1_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&hdmi {
+	assigned-clocks = <&cru CLK_HDMI_CEC>;
+	assigned-clock-rates = <32768>;
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_32k: wifi-32k {
+			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vpu {
+	status = "okay";
+};
+
+&vdpu_mmu {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	vbus-supply = <&vcc5v0_usb2_otg>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 0d45868132b9..8d61f824c12d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -23,7 +23,7 @@
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1750000>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..25a8c781f4e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	status = "okay";
 	uart-has-rtscts;
 
@@ -748,13 +748,14 @@
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 		vbat-supply = <&vcc_sys>;
 		vddio-supply = <&vcca1v8_pmu>;
+		max-speed = <3000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 77b179cd20e7..b276eb0810c7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -246,7 +246,7 @@
 		compatible = "rockchip,rk809";
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 		clock-names = "mclk";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index dba648c2f57e..61c7a3ad7387 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -82,6 +82,18 @@
 		vin-supply = <&usb_5v>;
 	};
 
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -122,6 +134,10 @@
 	status = "okay";
 };
 
+&combphy2 {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vdd_cpu>;
 };
@@ -142,7 +158,7 @@
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m0_miim
@@ -432,11 +448,7 @@
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3m1_xfer>;
-	status = "okay";
-};
-
-&i2c5 {
+	pinctrl-0 = <&i2c3m0_xfer>;
 	status = "okay";
 };
 
@@ -447,6 +459,14 @@
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -468,6 +488,16 @@
 		};
 	};
 
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic_int {
 			rockchip,pins =
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
new file mode 100644
index 000000000000..4e49bebf548b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* labeled VCC_SSD in schematic */
+	vcc3v3_pcie_p: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v_dcin: vcc5v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	color = <LED_COLOR_ID_RED>;
+	function = LED_FUNCTION_DISK_ACTIVITY;
+	linux,default-trigger = "disk-activity";
+	status = "okay";
+};
+
+&led_work {
+	color = <LED_COLOR_ID_GREEN>;
+	function = LED_FUNCTION_STATUS;
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc3v0_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v_dcin>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index e00568a6be5c..263ce40770dd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -30,6 +30,12 @@
 	};
 };
 
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 };
@@ -105,6 +111,11 @@
 	status = "okay";
 };
 
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &rgmii_phy1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
new file mode 100644
index 000000000000..2208dbfb7f0a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled DCIN_12V in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/*
+	 * Labelled VCC3V0_SD in schematic to not conflict with PMIC
+	 * regulator, it's 3.3v in actuality
+	 */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc12v_pcie: vcc12v-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+/*
+ * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
+ * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
+ * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
+ */
+&sdmmc0 {
+	vmmc-supply = <&vcc3v3_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v0_usb>;
+};
+
+&vcc3v3_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 5bcd4be32964..ce7165d7f1a1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -28,6 +29,17 @@
 		#clock-cells = <0>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -143,6 +155,33 @@
 	status = "disabled";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -411,6 +450,10 @@
 	status = "disabled";
 };
 
+&i2s0_8ch {
+	status = "okay";
+};
+
 /*
  * i2s1_8ch is exposed on CM1 / Module1A
  * pin 24 - i2s1_sdi1_m1
@@ -444,6 +487,12 @@
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -469,6 +518,15 @@
 		};
 	};
 
+	pcie {
+		pcie_clkreq_h: pcie-clkreq-h {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -614,3 +672,20 @@
 &usb_host0_xhci {
 	status = "disabled";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index c282f6e79960..26d7fda275ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -500,7 +500,6 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "rtcic_32kout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
new file mode 100644
index 000000000000..59ecf868dbd0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-M1";
+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c3;
+		i2c3 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_power_pin>;
+		};
+		led_work: led-1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_pin>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&combphy1 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			/* external pullup to VCC3V3_SYS */
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_power_pin: led-power-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_work_pin: led-work-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk809 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SPL";
+				reg = <0x0 0xe0000>;
+			};
+			partition@e0000 {
+				label = "U-Boot Env";
+				reg = <0xe0000 0x20000>;
+			};
+			partition@100000 {
+				label = "U-Boot";
+				reg = <0x100000 0x200000>;
+			};
+			partition@300000 {
+				label = "splash";
+				reg = <0x300000 0x100000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index fb87a168fe96..a1c5fdf7d68f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -32,6 +32,13 @@
 		};
 	};
 
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -60,13 +67,55 @@
 		};
 	};
 
-	vcc12v_dcin: vcc12v-dcin {
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
 		regulator-boot-on;
 	};
 
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pi6c_03";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -79,7 +128,7 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc3v3_sys: vcc3v3-sys {
+	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
 		regulator-always-on;
@@ -89,7 +138,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -99,7 +148,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb: vcc5v0-usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -109,7 +158,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vcc5v0_usb_host: vcc5v0-usb-host {
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -144,7 +193,7 @@
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc_cam: vcc-cam {
+	vcc_cam: vcc-cam-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -160,7 +209,7 @@
 		};
 	};
 
-	vcc_mipi: vcc-mipi {
+	vcc_mipi: vcc-mipi-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
@@ -207,16 +256,17 @@
 
 &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
-	assigned-clock-rates = <0>, <125000000>;
-	clock_in_out = "output";
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim
 		     &gmac1m1_tx_bus2
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
 		     &gmac1m1_rgmii_bus>;
 	status = "okay";
 };
@@ -509,7 +559,6 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "rtcic_32kout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
@@ -526,6 +575,11 @@
 	status = "okay";
 };
 
+&i2s2_2ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -546,6 +600,19 @@
 	status = "okay";
 };
 
+&pcie30phy {
+	phy-supply = <&vcc3v3_pi6c_03>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	cam {
 		vcc_cam_en: vcc_cam_en {
@@ -605,6 +672,26 @@
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -649,12 +736,50 @@
 	status = "okay";
 };
 
+&sdmmc2 {
+	supports-sdio;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <0>;
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+		/* vddio comes from regulator on module, use IO bank voltage instead */
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 164708f1eb67..5706c3e24f0a 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -1049,20 +1049,6 @@
 		status = "disabled";
 	};
 
-	spdif: spdif@fe460000 {
-		compatible = "rockchip,rk3568-spdif";
-		reg = <0x0 0xfe460000 0x0 0x1000>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "mclk", "hclk";
-		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
-		dmas = <&dmac1 1>;
-		dma-names = "tx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spdifm0_tx>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
 	i2s0_8ch: i2s@fe400000 {
 		compatible = "rockchip,rk3568-i2s-tdm";
 		reg = <0x0 0xfe400000 0x0 0x1000>;
@@ -1105,6 +1091,28 @@
 		status = "disabled";
 	};
 
+	i2s2_2ch: i2s@fe420000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe420000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-rates = <1188000000>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 4>, <&dmac1 5>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S2_2CH>;
+		reset-names = "m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m0_sclktx
+				&i2s2m0_lrcktx
+				&i2s2m0_sdi
+				&i2s2m0_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s3_2ch: i2s@fe430000 {
 		compatible = "rockchip,rk3568-i2s-tdm";
 		reg = <0x0 0xfe430000 0x0 0x1000>;
@@ -1142,6 +1150,20 @@
 		status = "disabled";
 	};
 
+	spdif: spdif@fe460000 {
+		compatible = "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe460000 0x0 0x1000>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
+		dmas = <&dmac1 1>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm0_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	dmac0: dma-controller@fe530000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe530000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index d0abb9aa0e9e..e3852c946352 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -55,14 +55,14 @@
 		samsung,pins = "gpf5-0";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out-pins {
 		samsung,pins = "gpf5-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
@@ -239,105 +239,105 @@
 		samsung,pins = "gpb6-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb6-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpb0-2", "gpb0-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpb0-4", "gpb0-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpb0-6", "gpb0-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpb1-2", "gpb1-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpb1-4", "gpb1-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpb1-6", "gpb1-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart0_data: uart0-data-pins {
 		samsung,pins = "gpb7-0", "gpb7-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gpb7-4", "gpb7-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.h b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
index 6ffbda362493..c397d02208a0 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
@@ -16,9 +16,9 @@
 #define FSD_PIN_PULL_UP			3
 
 #define FSD_PIN_DRV_LV1			0
-#define FSD_PIN_DRV_LV2			2
-#define FSD_PIN_DRV_LV3			1
-#define FSD_PIN_DRV_LV4			3
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
 
 #define FSD_PIN_FUNC_INPUT		0
 #define FSD_PIN_FUNC_OUTPUT		1
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 4555a5be2257..cf7c509538a4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 03660476364f..072903649d6e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -192,6 +192,102 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -199,6 +295,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -208,6 +305,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -217,6 +315,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -226,6 +325,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -235,6 +335,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -244,6 +345,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -253,6 +355,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -264,6 +367,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -275,6 +379,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -286,6 +391,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -297,6 +403,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -307,6 +414,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 172 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -317,6 +425,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 173 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -327,6 +436,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 174 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -393,6 +503,7 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x9>;
 		ti,otap-del-sel-hs200 = <0x6>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -416,6 +527,7 @@
 		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
+		status = "disabled";
 	};
 
 	sdhci2: mmc@fa20000 {
@@ -438,6 +550,7 @@
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	fss: bus@fc00000 {
@@ -462,6 +575,7 @@
 			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 
@@ -520,6 +634,7 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
@@ -557,6 +672,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -566,6 +682,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -575,6 +692,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -589,6 +707,7 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	epwm0: pwm@23000000 {
@@ -598,6 +717,7 @@
 		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm1: pwm@23010000 {
@@ -607,6 +727,7 @@
 		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm2: pwm@23020000 {
@@ -616,5 +737,6 @@
 		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index f56c803560f2..a427231527c3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -14,6 +14,51 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
 	mcu_uart0: serial@4a00000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x04a00000 0x00 0x100>;
@@ -21,6 +66,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@4900000 {
@@ -32,6 +78,7 @@
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@4b00000 {
@@ -42,6 +89,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -52,6 +100,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 4090134676cf..38dced6b4fef 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -26,16 +26,18 @@
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 93a5f0817efc..4f179b146cab 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -31,6 +31,15 @@
 		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
 	};
 
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* 2G RAM */
@@ -282,11 +291,8 @@
 	status = "reserved";
 };
 
-&mcu_uart0 {
-	status = "disabled";
-};
-
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -296,41 +302,15 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&wkup_i2c0 {
-	status = "disabled";
-};
-
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -363,15 +343,8 @@
 	};
 };
 
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -380,6 +353,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
 	pinctrl-names = "default";
@@ -390,8 +364,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&main_mdio1_pins_default
-		     &main_rgmii1_pins_default
+	pinctrl-0 = <&main_rgmii1_pins_default
 		     &main_rgmii2_pins_default>;
 };
 
@@ -406,6 +379,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -429,6 +406,7 @@
 };
 
 &ospi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
@@ -486,31 +464,3 @@
 		};
 	};
 };
-
-&ecap0 {
-	status = "disabled";
-};
-
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
index 887f31c23fef..cea2cc7de5dd 100644
--- a/arch/arm64/boot/dts/ti/k3-am625.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -48,6 +48,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,6 +64,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -76,6 +80,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -90,6 +96,51 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&wkup_conf>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 99afac40e8d4..81d984414fd4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -31,7 +31,7 @@
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index d6aa23681bbe..5e8036f32d79 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -237,6 +237,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -248,6 +249,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -259,6 +261,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -270,6 +273,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -281,6 +285,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -292,6 +297,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -303,6 +309,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -314,6 +321,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -325,6 +333,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -336,6 +345,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -347,6 +357,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -359,6 +370,7 @@
 		clocks = <&k3_clks 141 0>;
 		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
 		dma-names = "tx0", "rx0";
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -369,6 +381,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -379,6 +392,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_spi3: spi@20130000 {
@@ -389,6 +403,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 144 0>;
+		status = "disabled";
 	};
 
 	main_spi4: spi@20140000 {
@@ -399,6 +414,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 145 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -536,6 +552,7 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
@@ -612,7 +629,7 @@
 		assigned-clocks = <&k3_clks 0 0>;
 		assigned-clock-parents = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -855,6 +872,7 @@
 		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
 			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+		status = "disabled";
 	};
 
 	pcie0_ep: pcie-ep@f102000 {
@@ -873,6 +891,7 @@
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <1>;
+		status = "disabled";
 	};
 
 	epwm0: pwm@23000000 {
@@ -882,6 +901,7 @@
 		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm1: pwm@23010000 {
@@ -891,6 +911,7 @@
 		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm2: pwm@23020000 {
@@ -900,6 +921,7 @@
 		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm3: pwm@23030000 {
@@ -909,6 +931,7 @@
 		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm4: pwm@23040000 {
@@ -918,6 +941,7 @@
 		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm5: pwm@23050000 {
@@ -927,6 +951,7 @@
 		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm6: pwm@23060000 {
@@ -936,6 +961,7 @@
 		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm7: pwm@23070000 {
@@ -945,6 +971,7 @@
 		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	epwm8: pwm@23080000 {
@@ -954,6 +981,7 @@
 		power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ecap0: pwm@23100000 {
@@ -963,6 +991,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -972,6 +1001,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -981,6 +1011,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_rti0: watchdog@e000000 {
@@ -1138,6 +1169,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1278,6 +1310,7 @@
 			clocks = <&k3_clks 82 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1293,6 +1326,7 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@20711000 {
@@ -1307,6 +1341,7 @@
 			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	crypto: crypto@40900000 {
@@ -1324,7 +1359,6 @@
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x00 0x40910000 0x00 0x7d>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 133 1>;
 			status = "disabled"; /* Used by OP-TEE */
 		};
 	};
@@ -1334,8 +1368,8 @@
 		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 80 0>;
 		clock-names = "fck";
-		reg = <0x00 0x03b000000 0x00 0x400>,
-		      <0x00 0x050000000 0x00 0x8000000>;
+		reg = <0x00 0x3b000000 0x00 0x400>,
+		      <0x00 0x50000000 0x00 0x8000000>;
 		reg-names = "cfg", "data";
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		gpmc,num-cs = <3>;
@@ -1346,6 +1380,7 @@
 		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		status = "disabled";
 	};
 
 	elm0: ecc@25010000 {
@@ -1355,5 +1390,6 @@
 		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 54 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 02d4285acbb8..38ddf0b3b8a0 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -14,6 +14,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart1: serial@4a10000 {
@@ -24,6 +25,7 @@
 		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 160 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@4900000 {
@@ -35,6 +37,7 @@
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@4910000 {
@@ -46,6 +49,7 @@
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@4b00000 {
@@ -56,6 +60,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -66,6 +71,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 5cf913860f80..39feea78a084 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -325,6 +325,7 @@
 };
 
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -334,35 +335,8 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -405,23 +379,8 @@
 	status = "reserved";
 };
 
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&mcu_i2c1 {
-	status = "disabled";
-};
-
-&mcu_spi0 {
-	status = "disabled";
-};
-
-&mcu_spi1 {
-	status = "disabled";
-};
-
 &main_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	ti,pindir-d0-out-d1-in;
@@ -466,8 +425,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mdio1_pins_default
-		     &rgmii1_pins_default
+	pinctrl-0 = <&rgmii1_pins_default
 		     &rgmii2_pins_default>;
 };
 
@@ -482,6 +440,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -594,6 +556,7 @@
 };
 
 &pcie0_rc {
+	status = "okay";
 	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
 	phys = <&serdes0_pcie_link>;
 	phy-names = "pcie-phy";
@@ -604,83 +567,25 @@
 	phys = <&serdes0_pcie_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <1>;
-	status = "disabled";
 };
 
 &ecap0 {
+	status = "okay";
 	/* PWM is available on Pin 1 of header J12 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_ecap0_pins_default>;
 };
 
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
-
-&epwm3 {
-	status = "disabled";
-};
-
-&epwm4 {
-	status = "disabled";
-};
-
-&epwm5 {
-	status = "disabled";
-};
-
-&epwm6 {
-	status = "disabled";
-};
-
-&epwm7 {
-	status = "disabled";
-};
-
-&epwm8 {
-	status = "disabled";
-};
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
 &main_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &main_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
-
-&gpmc0 {
-	status = "disabled";
-};
-
-&elm0 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 738d0cf6c40a..2e2d40da360a 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -338,15 +338,8 @@
 	};
 };
 
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -356,35 +349,8 @@
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_i2c0 {
-	status = "disabled";
-};
-
-&mcu_i2c1 {
-	status = "disabled";
-};
-
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -409,18 +375,6 @@
 	};
 };
 
-&main_i2c3 {
-	status = "disabled";
-};
-
-&mcu_spi0 {
-	status = "disabled";
-};
-
-&mcu_spi1 {
-	status = "disabled";
-};
-
 /* mcu_gpio0 is reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
@@ -485,8 +439,7 @@
 
 &cpsw3g {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mdio1_pins_default
-		     &rgmii1_pins_default
+	pinctrl-0 = <&rgmii1_pins_default
 		     &rgmii2_pins_default>;
 };
 
@@ -501,6 +454,10 @@
 };
 
 &cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -603,92 +560,9 @@
 			<&main_r5fss1_core1_memory_region>;
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
 &ecap0 {
+	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_ecap0_pins_default>;
 };
-
-&ecap1 {
-	status = "disabled";
-};
-
-&ecap2 {
-	status = "disabled";
-};
-
-&epwm0 {
-	status = "disabled";
-};
-
-&epwm1 {
-	status = "disabled";
-};
-
-&epwm2 {
-	status = "disabled";
-};
-
-&epwm3 {
-	status = "disabled";
-};
-
-&epwm4 {
-	/*
-	 * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat)
-	 * But RPi Hat will be used for other use cases, so marking epwm4 as disabled.
-	 */
-	status = "disabled";
-};
-
-&epwm5 {
-	/*
-	 * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat)
-	 * But RPi Hat will be used for other use cases, so marking epwm5 as disabled.
-	 */
-	status = "disabled";
-};
-
-&epwm6 {
-	status = "disabled";
-};
-
-&epwm7 {
-	status = "disabled";
-};
-
-&epwm8 {
-	status = "disabled";
-};
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&main_mcan1 {
-	status = "disabled";
-};
-
-&gpmc0 {
-	status = "disabled";
-};
-
-&elm0 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 32b797237581..3cced26b520a 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -360,15 +360,13 @@
 };
 
 &main_uart1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
 &mcu_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&arduino_uart_pins_default>;
 };
@@ -413,12 +411,14 @@
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &mcu_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -478,6 +478,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -495,18 +496,21 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -546,6 +550,7 @@
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
@@ -570,6 +575,7 @@
 };
 
 &mcu_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_spi0_pins_default>;
 
@@ -626,15 +632,8 @@
 	};
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
 &pcie1_rc {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&minipcie_pins_default>;
 
@@ -644,19 +643,8 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
-&m_can0 {
-	status = "disabled";
-};
-
-&m_can1 {
-	status = "disabled";
-};
-
-&pcie1_ep {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -666,6 +654,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -674,46 +663,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
@@ -725,27 +674,3 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
 };
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&icssg2_mdio {
-	status = "disabled";
-};
-
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 4005a73cfea9..1adba2f2c153 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -91,6 +91,7 @@
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -99,6 +100,7 @@
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -107,6 +109,7 @@
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	crypto: crypto@4e00000 {
@@ -120,17 +123,33 @@
 		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
 				<&main_udmap 0x4003>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x0 0x4e10000 0x0 0x7d>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 136 1>;
 			status = "disabled"; /* Used by OP-TEE */
 		};
 	};
 
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x30>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+	};
+
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
@@ -156,6 +175,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 110 1>;
 		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -167,6 +187,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 111 1>;
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -178,6 +199,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 112 1>;
 		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -189,6 +211,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 113 1>;
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	ecap0: pwm@3100000 {
@@ -198,6 +221,7 @@
 		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 39 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@2100000 {
@@ -210,6 +234,7 @@
 		#size-cells = <0>;
 		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
 		dma-names = "tx0", "rx0";
+		status = "disabled";
 	};
 
 	main_spi1: spi@2110000 {
@@ -222,6 +247,7 @@
 		#size-cells = <0>;
 		assigned-clocks = <&k3_clks 137 1>;
 		assigned-clock-rates = <48000000>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@2120000 {
@@ -232,6 +258,7 @@
 		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	main_spi3: spi@2130000 {
@@ -242,6 +269,7 @@
 		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	main_spi4: spi@2140000 {
@@ -252,6 +280,151 @@
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 23 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 23 0>;
+		assigned-clock-parents = <&k3_clks 23 1>;
+		power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 24 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 24 0>;
+		assigned-clock-parents = <&k3_clks 24 1>;
+		power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 27 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 27 0>;
+		assigned-clock-parents = <&k3_clks 27 1>;
+		power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 28 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 28 0>;
+		assigned-clock-parents = <&k3_clks 28 1>;
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 29 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 29 0>;
+		assigned-clock-parents = <&k3_clks 29 1>;
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 30 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 30 0>;
+		assigned-clock-parents = <&k3_clks 30 1>;
+		power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 31 0>;
+		assigned-clocks = <&k3_clks 31 0>;
+		assigned-clock-parents = <&k3_clks 31 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 32 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 32 0>;
+		assigned-clock-parents = <&k3_clks 32 1>;
+		power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 33 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 33 0>;
+		assigned-clock-parents = <&k3_clks 33 1>;
+		power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 34 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 34 0>;
+		assigned-clock-parents = <&k3_clks 34 1>;
+		power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 25 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 25 0>;
+		assigned-clock-parents = <&k3_clks 25 1>;
+		power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 26 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 26 0>;
+		assigned-clock-parents = <&k3_clks 26 1>;
+		power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
 	};
 
 	sdhci0: mmc@4f80000 {
@@ -342,7 +515,7 @@
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
 			compatible = "syscon";
-			reg = <0x0000041e0 0x14>;
+			reg = <0x000041e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock@4140 {
@@ -501,6 +674,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -510,6 +684,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -519,6 +694,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -528,6 +704,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -537,6 +714,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -546,6 +724,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -555,6 +734,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -564,6 +744,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -573,6 +754,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -582,6 +764,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -591,6 +774,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -600,6 +784,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
 		};
 
 		ringacc: ringacc@3c000000 {
@@ -707,6 +892,7 @@
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie0_ep: pcie-ep@5500000 {
@@ -720,6 +906,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	pcie1_rc: pcie@5600000 {
@@ -740,6 +927,7 @@
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		device_type = "pci";
+		status = "disabled";
 	};
 
 	pcie1_ep: pcie-ep@5600000 {
@@ -753,6 +941,7 @@
 		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
 	};
 
 	mcasp0: mcasp@2b00000 {
@@ -770,6 +959,7 @@
 		clocks = <&k3_clks 104 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp1: mcasp@2b10000 {
@@ -787,6 +977,7 @@
 		clocks = <&k3_clks 105 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp2: mcasp@2b20000 {
@@ -804,6 +995,7 @@
 		clocks = <&k3_clks 106 0>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	cal: cal@6f03000 {
@@ -874,6 +1066,7 @@
 		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm1: pwm@3010000 {
@@ -883,6 +1076,7 @@
 		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm2: pwm@3020000 {
@@ -892,6 +1086,7 @@
 		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm3: pwm@3030000 {
@@ -901,6 +1096,7 @@
 		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm4: pwm@3040000 {
@@ -910,6 +1106,7 @@
 		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	ehrpwm5: pwm@3050000 {
@@ -919,6 +1116,7 @@
 		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
 		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	icssg0: icssg@b000000 {
@@ -1059,6 +1257,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1200,6 +1399,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 
@@ -1341,6 +1541,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 8d592bf41d6f..5dfa31840e9c 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -20,13 +20,32 @@
 		};
 	};
 
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x10>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000101>;
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000003>;
+	};
+
 	mcu_uart0: serial@40a00000 {
 		compatible = "ti,am654-uart";
-			reg = <0x00 0x40a00000 0x00 0x100>;
-			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <96000000>;
-			current-speed = <115200>;
-			power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_ram: sram@41c00000 {
@@ -46,6 +65,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 114 1>;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_spi0: spi@40300000 {
@@ -56,6 +76,7 @@
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@40310000 {
@@ -66,6 +87,7 @@
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	mcu_spi2: spi@40320000 {
@@ -76,6 +98,7 @@
 		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	tscadc0: tscadc@40200000 {
@@ -85,7 +108,7 @@
 		clocks = <&k3_clks 0 2>;
 		assigned-clocks = <&k3_clks 0 2>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&mcu_udmap 0x7100>,
 			<&mcu_udmap 0x7101 >;
 		dma-names = "fifo0", "fifo1";
@@ -103,7 +126,7 @@
 		clocks = <&k3_clks 1 2>;
 		assigned-clocks = <&k3_clks 1 2>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&mcu_udmap 0x7102>,
 			<&mcu_udmap 0x7103>;
 		dma-names = "fifo0", "fifo1";
@@ -114,6 +137,51 @@
 		};
 	};
 
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		clocks = <&k3_clks 35 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		clocks = <&k3_clks 36 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		clocks = <&k3_clks 37 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		clocks = <&k3_clks 38 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
 	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
@@ -172,6 +240,7 @@
 			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	m_can1: mcan@40568000 {
@@ -187,6 +256,7 @@
 			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	fss: fss@47000000 {
@@ -273,6 +343,7 @@
 			clocks = <&k3_clks 5 10>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index fa11d7142006..fd2b998ebddc 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -54,6 +54,7 @@
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -65,6 +66,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 115 1>;
 		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	intr_wkup_gpio: interrupt-controller@42200000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 4a9bf7d7c07d..cd43fd11a5c2 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -50,6 +50,7 @@
 };
 
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 5850582dd4ed..592ab2b54cb3 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -271,13 +271,20 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -296,7 +303,13 @@
 	};
 };
 
+&mcu_i2c0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -310,23 +323,27 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
 
 &main_spi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	#address-cells = <1>;
@@ -398,31 +415,8 @@
 	status = "disabled";
 };
 
-&pcie0_rc {
-	status = "disabled";
-};
-
-&pcie0_ep {
-	status = "disabled";
-};
-
-&pcie1_rc {
-	status = "disabled";
-};
-
-&pcie1_ep {
-	status = "disabled";
-};
-
-&m_can0 {
-	status = "disabled";
-};
-
-&m_can1 {
-	status = "disabled";
-};
-
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -432,6 +426,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -440,46 +435,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
@@ -512,10 +467,14 @@
 
 &mcu_cpsw {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
 };
 
 &davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -528,30 +487,6 @@
 	phy-handle = <&phy0>;
 };
 
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
-
 &dss {
 	status = "disabled";
 };
-
-&icssg0_mdio {
-	status = "disabled";
-};
-
-&icssg1_mdio {
-	status = "disabled";
-};
-
-&icssg2_mdio {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index d25e8b26187f..0f67e1ec0fb8 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -50,7 +50,3 @@
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
-
-&main_uart0 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 7e8552fd2b6a..6240856e4863 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -154,51 +154,27 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart2 {
 	/* MAIN UART 2 is used by R5F firmware */
 	status = "reserved";
 };
 
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart4 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
 &main_gpio2 {
 	status = "disabled";
 };
@@ -234,6 +210,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -261,6 +238,7 @@
  * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
  */
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 80a57916bcb3..138381f43ce4 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -142,6 +142,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -151,6 +152,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -160,6 +162,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -169,6 +172,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -178,6 +182,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -187,6 +192,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -196,6 +202,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -205,6 +212,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -214,6 +222,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -223,6 +232,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -232,6 +242,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -241,6 +252,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -319,6 +331,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -330,6 +343,7 @@
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -341,6 +355,7 @@
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -352,6 +367,7 @@
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -363,6 +379,7 @@
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -374,6 +391,7 @@
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -385,6 +403,7 @@
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -396,6 +415,7 @@
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -407,6 +427,7 @@
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -418,6 +439,7 @@
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@2000000 {
@@ -429,6 +451,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 187 1>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -440,6 +463,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 188 1>;
 		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -451,6 +475,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 189 1>;
 		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -462,6 +487,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 190 1>;
 		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -473,6 +499,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 191 1>;
 		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -484,6 +511,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 192 1>;
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -495,6 +523,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 193 1>;
 		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a58682..fe669deba489 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -79,6 +79,7 @@
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -90,6 +91,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 2>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_gpio_intr: interrupt-controller@42200000 {
@@ -249,6 +251,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 194 1>;
 		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -260,6 +263,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 195 1>;
 		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -271,6 +275,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 197 1>;
 		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	fss: syscon@47000000 {
@@ -325,7 +330,7 @@
 		clocks = <&k3_clks 0 1>;
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
@@ -386,7 +391,6 @@
 		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
 		       <&mcu_udmap 0x7503>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@40910000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 2d615c3e9fa1..fa44ed4c17d5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -144,6 +144,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -158,6 +159,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -171,46 +173,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
new file mode 100644
index 000000000000..37c24b077b6a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleboard.org/ai-64
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
+ * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "beagle,j721e-beagleboneai64", "ti,j721e";
+	model = "BeagleBoard.org BeagleBone AI-64";
+
+	aliases {
+		serial2 = &main_uart0;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c6;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c4;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_pwr_pins_default>;
+
+		button-1 {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+
+		led-0 {
+			gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+			linux,default-trigger = "cpu";
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+			default-state = "off";
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-1 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-2 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwr_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: regulator-4 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp0_3v3_en_pins_default>;
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */
+			J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	sd_pwr_en_pins_default: sd-pwr-en-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_3v3_en_pins_default:dp0-3v3-en-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */
+		>;
+	};
+
+	dp0_pins_default: dp0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
+			J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
+			J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
+			J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
+			J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
+			J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
+			J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+			J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
+			J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
+		>;
+	};
+
+	csi0_gpio_pins_default: csi0-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+		>;
+	};
+
+	csi1_gpio_pins_default: csi1-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+		>;
+	};
+
+	pcie1_rst_pins_default: pcie1-rst-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	eeprom_wp_pins_default: eeprom-wp-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */
+			J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */
+			J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */
+			J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */
+			J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */
+			J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */
+			J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */
+		>;
+	};
+
+	mikro_bus_pins_default: mikro-bus-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */
+			J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */
+
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */
+			J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */
+			J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */
+
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */
+
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */
+			J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	sw_pwr_pins_default: sw-pwr-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_usbss1_pins_default: mcu-usbss1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by TIFS firmware. */
+	status = "reserved";
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci2 {
+	/* Unused */
+	status = "disabled";
+};
+
+&ospi0 {
+	/* Unused */
+	status = "disabled";
+};
+
+&ospi1 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default &csi1_gpio_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	/* BBB Header: P9.19 and P9.20 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c4 {
+	/* BBB Header: P9.24 and P9.26 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default &csi0_gpio_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c6 {
+	/* BBB Header: P9.17 and P9.18 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+};
+
+&main_gpio2 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio3 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio4 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio5 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio6 {
+	/* Unused */
+	status = "disabled";
+};
+
+&main_gpio7 {
+	/* Unused */
+	status = "disabled";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_adc0_pins_default &mcu_adc1_pins_default &mikro_bus_pins_default>;
+};
+
+&wkup_gpio1 {
+	/* Unused */
+	status = "disabled";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default &mcu_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&tscadc0 {
+	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&tscadc1 {
+	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
+	adc {
+		ti,adc-channels = <0>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie0_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie1_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins_default>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	max-link-speed = <3>;
+	reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie2_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_ep {
+	status = "disabled";
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_ep {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie3_rc {
+	/* Unused */
+	status = "disabled";
+};
+
+&pcie3_ep {
+	/* Unused */
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	/* Unused */
+	status = "disabled";
+};
+
+&icssg1_mdio {
+	/* Unused */
+	status = "disabled";
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index b1691ac3442d..7db0603125aa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -96,7 +96,7 @@
 			 <3300000 0x1>;
 	};
 
-	sound0: sound@0 {
+	sound0: sound-0 {
 		compatible = "ti,j721e-cpb-audio";
 		model = "j721e-cpb";
 
@@ -370,38 +370,30 @@
 	status = "reserved";
 };
 
-&main_uart0 {
-	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart0 {
+	status = "okay";
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart2 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart4 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_gpio2 {
@@ -537,6 +529,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -573,6 +566,7 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
@@ -598,6 +592,7 @@
 };
 
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -636,6 +631,7 @@
 };
 
 &main_i2c6 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c6_pins_default>;
 	clock-frequency = <400000>;
@@ -713,47 +709,8 @@
 	};
 };
 
-&mcasp0 {
-	status = "disabled";
-};
-
-&mcasp1 {
-	status = "disabled";
-};
-
-&mcasp2 {
-	status = "disabled";
-};
-
-&mcasp3 {
-	status = "disabled";
-};
-
-&mcasp4 {
-	status = "disabled";
-};
-
-&mcasp5 {
-	status = "disabled";
-};
-
-&mcasp6 {
-	status = "disabled";
-};
-
-&mcasp7 {
-	status = "disabled";
-};
-
-&mcasp8 {
-	status = "disabled";
-};
-
-&mcasp9 {
-	status = "disabled";
-};
-
 &mcasp10 {
+	status = "okay";
 	#sound-dai-cells = <0>;
 
 	pinctrl-names = "default";
@@ -771,10 +728,6 @@
 	rx-num-evt = <0>;
 };
 
-&mcasp11 {
-	status = "disabled";
-};
-
 &cmn_refclk1 {
 	clock-frequency = <100000000>;
 };
@@ -925,73 +878,29 @@
 };
 
 &mcu_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &mcu_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
 
 &main_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&transceiver3>;
 };
 
-&main_mcan1 {
-	status = "disabled";
-};
-
 &main_mcan2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan2_pins_default>;
 	phys = <&transceiver4>;
 };
-
-&main_mcan3 {
-	status = "disabled";
-};
-
-&main_mcan4 {
-	status = "disabled";
-};
-
-&main_mcan5 {
-	status = "disabled";
-};
-
-&main_mcan6 {
-	status = "disabled";
-};
-
-&main_mcan7 {
-	status = "disabled";
-};
-
-&main_mcan8 {
-	status = "disabled";
-};
-
-&main_mcan9 {
-	status = "disabled";
-};
-
-&main_mcan10 {
-	status = "disabled";
-};
-
-&main_mcan11 {
-	status = "disabled";
-};
-
-&main_mcan12 {
-	status = "disabled";
-};
-
-&main_mcan13 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efa..c935622f0102 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -66,7 +66,73 @@
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
 					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
-	    };
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 83 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 84 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 85 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
 	};
 
 	gic500: interrupt-controller@1800000 {
@@ -176,6 +242,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -185,6 +252,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -194,6 +262,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -203,6 +272,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -212,6 +282,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -221,6 +292,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -230,6 +302,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -239,6 +312,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -248,6 +322,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -257,6 +332,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -266,6 +342,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -275,6 +352,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -337,13 +415,11 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
 			reg = <0x0 0x4e10000 0x0 0x7d>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&k3_clks 264 2>;
 		};
 	};
 
@@ -840,6 +916,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -851,6 +928,7 @@
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -862,6 +940,7 @@
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -873,6 +952,7 @@
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -884,6 +964,7 @@
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -895,6 +976,7 @@
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -906,6 +988,7 @@
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -917,6 +1000,7 @@
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -928,6 +1012,7 @@
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -939,6 +1024,7 @@
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_gpio0: gpio@600000 {
@@ -1219,6 +1305,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 187 0>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -1230,6 +1317,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 188 0>;
 		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -1241,6 +1329,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 189 0>;
 		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -1252,6 +1341,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 190 0>;
 		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -1263,6 +1353,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 191 0>;
 		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -1274,6 +1365,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 192 0>;
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -1285,6 +1377,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 193 0>;
 		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	ufs_wrapper: ufs-wrapper@4e80000 {
@@ -1408,6 +1501,7 @@
 		clocks = <&k3_clks 174 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp1: mcasp@2b10000 {
@@ -1425,6 +1519,7 @@
 		clocks = <&k3_clks 175 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp2: mcasp@2b20000 {
@@ -1442,6 +1537,7 @@
 		clocks = <&k3_clks 176 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp3: mcasp@2b30000 {
@@ -1459,6 +1555,7 @@
 		clocks = <&k3_clks 177 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp4: mcasp@2b40000 {
@@ -1476,6 +1573,7 @@
 		clocks = <&k3_clks 178 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp5: mcasp@2b50000 {
@@ -1493,6 +1591,7 @@
 		clocks = <&k3_clks 179 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp6: mcasp@2b60000 {
@@ -1510,6 +1609,7 @@
 		clocks = <&k3_clks 180 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp7: mcasp@2b70000 {
@@ -1527,6 +1627,7 @@
 		clocks = <&k3_clks 181 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp8: mcasp@2b80000 {
@@ -1544,6 +1645,7 @@
 		clocks = <&k3_clks 182 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp9: mcasp@2b90000 {
@@ -1561,6 +1663,7 @@
 		clocks = <&k3_clks 183 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp10: mcasp@2ba0000 {
@@ -1578,6 +1681,7 @@
 		clocks = <&k3_clks 184 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcasp11: mcasp@2bb0000 {
@@ -1595,6 +1699,7 @@
 		clocks = <&k3_clks 185 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	watchdog0: watchdog@2200000 {
@@ -2027,6 +2132,7 @@
 			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@2711000 {
@@ -2041,6 +2147,7 @@
 			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan2: can@2721000 {
@@ -2055,6 +2162,7 @@
 			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan3: can@2731000 {
@@ -2069,6 +2177,7 @@
 			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan4: can@2741000 {
@@ -2083,6 +2192,7 @@
 			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan5: can@2751000 {
@@ -2097,6 +2207,7 @@
 			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan6: can@2761000 {
@@ -2111,6 +2222,7 @@
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan7: can@2771000 {
@@ -2125,6 +2237,7 @@
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan8: can@2781000 {
@@ -2139,6 +2252,7 @@
 			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan9: can@2791000 {
@@ -2153,6 +2267,7 @@
 			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan10: can@27a1000 {
@@ -2167,6 +2282,7 @@
 			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan11: can@27b1000 {
@@ -2181,6 +2297,7 @@
 			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan12: can@27c1000 {
@@ -2195,6 +2312,7 @@
 			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan13: can@27d1000 {
@@ -2209,5 +2327,6 @@
 			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf1c..8ac78034d5d6 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -79,6 +79,7 @@
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -90,6 +91,7 @@
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_gpio_intr: interrupt-controller@42200000 {
@@ -145,6 +147,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 194 0>;
 		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -156,6 +159,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 195 0>;
 		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -167,6 +171,7 @@
 		clock-names = "fck";
 		clocks = <&k3_clks 197 0>;
 		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
 	};
 
 	fss: fss@47000000 {
@@ -216,7 +221,7 @@
 		clocks = <&k3_clks 0 1>;
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
@@ -235,7 +240,7 @@
 		clocks = <&k3_clks 1 1>;
 		assigned-clocks = <&k3_clks 1 3>;
 		assigned-clock-rates = <60000000>;
-		clock-names = "adc_tsc_fck";
+		clock-names = "fck";
 		dmas = <&main_udmap 0x7402>,
 			<&main_udmap 0x7403>;
 		dma-names = "fifo0", "fifo1";
@@ -403,6 +408,7 @@
 			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_mcan1: can@40568000 {
@@ -417,5 +423,6 @@
 			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 80358cba6954..4640d280c85c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -400,6 +400,47 @@
 			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
 		>;
 	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+			J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
+			J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
+			J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
+			J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -475,46 +516,22 @@
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart2 {
-	/* Brought out on RPi header */
-	status = "disabled";
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* Brought out on M.2 E Key */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_sdhci0 {
@@ -561,6 +578,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -588,18 +606,15 @@
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
 	clock-frequency = <100000>;
 };
 
-&main_i2c2 {
-	/* Unused */
-	status = "disabled";
-};
-
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
@@ -626,19 +641,22 @@
 	};
 };
 
-&main_i2c4 {
-	/* Unused */
-	status = "disabled";
-};
-
 &main_i2c5 {
 	/* Brought out on RPi Header */
-	status = "disabled";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
 };
 
-&main_i2c6 {
-	/* Unused */
-	status = "disabled";
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
 };
 
 &main_gpio2 {
@@ -837,66 +855,6 @@
 	};
 };
 
-&mcasp0 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp1 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp2 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp3 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp4 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp5 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp6 {
-	/* Brought out on RPi header */
-	status = "disabled";
-};
-
-&mcasp7 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp8 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp9 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp10 {
-	/* Unused */
-	status = "disabled";
-};
-
-&mcasp11 {
-	/* Brought out on M.2 E Key */
-	status = "disabled";
-};
-
 &serdes0 {
 	serdes0_pcie_link: phy@0 {
 		reg = <0>;
@@ -984,6 +942,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -998,6 +957,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -1012,6 +972,7 @@
 };
 
 &mailbox0_cluster2 {
+	status = "okay";
 	interrupts = <428>;
 
 	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
@@ -1026,6 +987,7 @@
 };
 
 &mailbox0_cluster3 {
+	status = "okay";
 	interrupts = <424>;
 
 	mbox_c66_0: mbox-c66-0 {
@@ -1040,6 +1002,7 @@
 };
 
 &mailbox0_cluster4 {
+	status = "okay";
 	interrupts = <420>;
 
 	mbox_c71_0: mbox-c71-0 {
@@ -1048,34 +1011,6 @@
 	};
 };
 
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index e36335232cf8..e289d5b44356 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -186,6 +186,7 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
 	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -200,6 +201,7 @@
 };
 
 &mailbox0_cluster1 {
+	status = "okay";
 	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -214,6 +216,7 @@
 };
 
 &mailbox0_cluster2 {
+	status = "okay";
 	interrupts = <428>;
 
 	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
@@ -228,6 +231,7 @@
 };
 
 &mailbox0_cluster3 {
+	status = "okay";
 	interrupts = <424>;
 
 	mbox_c66_0: mbox-c66-0 {
@@ -242,6 +246,7 @@
 };
 
 &mailbox0_cluster4 {
+	status = "okay";
 	interrupts = <420>;
 
 	mbox_c71_0: mbox-c71-0 {
@@ -250,34 +255,6 @@
 	};
 };
 
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..a7aa6cf08acd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -219,49 +219,19 @@
 	status = "reserved";
 };
 
-&main_uart0 {
-	status = "disabled";
-};
-
-&main_uart1 {
-	status = "disabled";
-};
-
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&main_uart7 {
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_uart8 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart8_pins_default>;
 	/* Shared with TFA on this platform */
 	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
 };
 
-&main_uart9 {
-	status = "disabled";
-};
-
 &main_i2c0 {
 	clock-frequency = <400000>;
 
@@ -291,30 +261,6 @@
 	};
 };
 
-&main_i2c1 {
-	status = "disabled";
-};
-
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
-&main_i2c4 {
-	status = "disabled";
-};
-
-&main_i2c5 {
-	status = "disabled";
-};
-
-&main_i2c6 {
-	status = "disabled";
-};
-
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
@@ -351,81 +297,15 @@
 };
 
 &mcu_mcan0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan0_pins_default>;
 	phys = <&transceiver1>;
 };
 
 &mcu_mcan1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
-
-&main_mcan0 {
-	status = "disabled";
-};
-
-&main_mcan1 {
-	status = "disabled";
-};
-
-&main_mcan2 {
-	status = "disabled";
-};
-
-&main_mcan3 {
-	status = "disabled";
-};
-
-&main_mcan4 {
-	status = "disabled";
-};
-
-&main_mcan5 {
-	status = "disabled";
-};
-
-&main_mcan6 {
-	status = "disabled";
-};
-
-&main_mcan7 {
-	status = "disabled";
-};
-
-&main_mcan8 {
-	status = "disabled";
-};
-
-&main_mcan9 {
-	status = "disabled";
-};
-
-&main_mcan10 {
-	status = "disabled";
-};
-
-&main_mcan11 {
-	status = "disabled";
-};
-
-&main_mcan12 {
-	status = "disabled";
-};
-
-&main_mcan13 {
-	status = "disabled";
-};
-
-&main_mcan14 {
-	status = "disabled";
-};
-
-&main_mcan15 {
-	status = "disabled";
-};
-
-&main_mcan17 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 34e7d577ae13..8915132efcc1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -60,7 +60,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <148>;
-		ti,interrupt-ranges = <8 360 56>;
+		ti,interrupt-ranges = <8 392 56>;
 	};
 
 	main_pmx0: pinctrl@11c000 {
@@ -72,6 +72,25 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x04e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+		       <&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x04e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x200>;
@@ -80,6 +99,7 @@
 		clocks = <&k3_clks 146 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -90,6 +110,7 @@
 		clocks = <&k3_clks 350 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -100,6 +121,7 @@
 		clocks = <&k3_clks 351 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -110,6 +132,7 @@
 		clocks = <&k3_clks 352 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -120,6 +143,7 @@
 		clocks = <&k3_clks 353 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -130,6 +154,7 @@
 		clocks = <&k3_clks 354 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -140,6 +165,7 @@
 		clocks = <&k3_clks 355 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -150,6 +176,7 @@
 		clocks = <&k3_clks 356 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -160,6 +187,7 @@
 		clocks = <&k3_clks 357 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -170,6 +198,7 @@
 		clocks = <&k3_clks 358 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_gpio0: gpio@600000 {
@@ -256,6 +285,7 @@
 		clocks = <&k3_clks 215 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -267,6 +297,7 @@
 		clocks = <&k3_clks 216 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -278,6 +309,7 @@
 		clocks = <&k3_clks 217 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -289,6 +321,7 @@
 		clocks = <&k3_clks 218 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -300,6 +333,7 @@
 		clocks = <&k3_clks 219 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -311,6 +345,7 @@
 		clocks = <&k3_clks 220 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
@@ -428,6 +463,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster1: mailbox@31f81000 {
@@ -437,6 +473,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster2: mailbox@31f82000 {
@@ -446,6 +483,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster3: mailbox@31f83000 {
@@ -455,6 +493,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster4: mailbox@31f84000 {
@@ -464,6 +503,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster5: mailbox@31f85000 {
@@ -473,6 +513,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster6: mailbox@31f86000 {
@@ -482,6 +523,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster7: mailbox@31f87000 {
@@ -491,6 +533,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster8: mailbox@31f88000 {
@@ -500,6 +543,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster9: mailbox@31f89000 {
@@ -509,6 +553,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster10: mailbox@31f8a000 {
@@ -518,6 +563,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox0_cluster11: mailbox@31f8b000 {
@@ -527,6 +573,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster0: mailbox@31f90000 {
@@ -536,6 +583,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster1: mailbox@31f91000 {
@@ -545,6 +593,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster2: mailbox@31f92000 {
@@ -554,6 +603,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster3: mailbox@31f93000 {
@@ -563,6 +613,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster4: mailbox@31f94000 {
@@ -572,6 +623,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster5: mailbox@31f95000 {
@@ -581,6 +633,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster6: mailbox@31f96000 {
@@ -590,6 +643,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster7: mailbox@31f97000 {
@@ -599,6 +653,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster8: mailbox@31f98000 {
@@ -608,6 +663,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster9: mailbox@31f99000 {
@@ -617,6 +673,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster10: mailbox@31f9a000 {
@@ -626,6 +683,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		mailbox1_cluster11: mailbox@31f9b000 {
@@ -635,6 +693,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
 		};
 
 		main_ringacc: ringacc@3c000000 {
@@ -698,6 +757,7 @@
 			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan1: can@2711000 {
@@ -712,6 +772,7 @@
 			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan2: can@2721000 {
@@ -726,6 +787,7 @@
 			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan3: can@2731000 {
@@ -740,6 +802,7 @@
 			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan4: can@2741000 {
@@ -754,6 +817,7 @@
 			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan5: can@2751000 {
@@ -768,6 +832,7 @@
 			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan6: can@2761000 {
@@ -782,6 +847,7 @@
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan7: can@2771000 {
@@ -796,6 +862,7 @@
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan8: can@2781000 {
@@ -810,6 +877,7 @@
 			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan9: can@2791000 {
@@ -824,6 +892,7 @@
 			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan10: can@27a1000 {
@@ -838,6 +907,7 @@
 			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan11: can@27b1000 {
@@ -852,6 +922,7 @@
 			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan12: can@27c1000 {
@@ -866,6 +937,7 @@
 			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan13: can@27d1000 {
@@ -880,6 +952,7 @@
 			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan14: can@2681000 {
@@ -894,6 +967,7 @@
 			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan15: can@2691000 {
@@ -908,6 +982,7 @@
 			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan16: can@26a1000 {
@@ -922,6 +997,7 @@
 			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	main_mcan17: can@26b1000 {
@@ -936,5 +1012,6 @@
 			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..0af242aa9816 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -65,7 +65,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <125>;
-		ti,interrupt-ranges = <16 928 16>;
+		ti,interrupt-ranges = <16 960 16>;
 	};
 
 	mcu_conf: syscon@40f00000 {
@@ -91,6 +91,7 @@
 		clocks = <&k3_clks 359 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -101,6 +102,7 @@
 		clocks = <&k3_clks 149 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_gpio0: gpio@42110000 {
@@ -144,6 +146,7 @@
 		clocks = <&k3_clks 223 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@40b00000 {
@@ -155,6 +158,7 @@
 		clocks = <&k3_clks 221 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -166,6 +170,7 @@
 		clocks = <&k3_clks 222 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_mcan0: can@40528000 {
@@ -180,6 +185,7 @@
 			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_mcan1: can@40568000 {
@@ -194,6 +200,7 @@
 			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	mcu_navss: bus@28380000{
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 76f0ceacb6d4..6930efff8a5a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -56,6 +56,7 @@
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -73,103 +74,8 @@
 };
 
 &main_mcan16 {
+	status = "okay";
 	pinctrl-0 = <&main_mcan16_pins_default>;
 	pinctrl-names = "default";
 	phys = <&transceiver0>;
 };
-
-&mailbox0_cluster0 {
-	status = "disabled";
-};
-
-&mailbox0_cluster1 {
-	status = "disabled";
-};
-
-&mailbox0_cluster2 {
-	status = "disabled";
-};
-
-&mailbox0_cluster3 {
-	status = "disabled";
-};
-
-&mailbox0_cluster4 {
-	status = "disabled";
-};
-
-&mailbox0_cluster5 {
-	status = "disabled";
-};
-
-&mailbox0_cluster6 {
-	status = "disabled";
-};
-
-&mailbox0_cluster7 {
-	status = "disabled";
-};
-
-&mailbox0_cluster8 {
-	status = "disabled";
-};
-
-&mailbox0_cluster9 {
-	status = "disabled";
-};
-
-&mailbox0_cluster10 {
-	status = "disabled";
-};
-
-&mailbox0_cluster11 {
-	status = "disabled";
-};
-
-&mailbox1_cluster0 {
-	status = "disabled";
-};
-
-&mailbox1_cluster1 {
-	status = "disabled";
-};
-
-&mailbox1_cluster2 {
-	status = "disabled";
-};
-
-&mailbox1_cluster3 {
-	status = "disabled";
-};
-
-&mailbox1_cluster4 {
-	status = "disabled";
-};
-
-&mailbox1_cluster5 {
-	status = "disabled";
-};
-
-&mailbox1_cluster6 {
-	status = "disabled";
-};
-
-&mailbox1_cluster7 {
-	status = "disabled";
-};
-
-&mailbox1_cluster8 {
-	status = "disabled";
-};
-
-&mailbox1_cluster9 {
-	status = "disabled";
-};
-
-&mailbox1_cluster10 {
-	status = "disabled";
-};
-
-&mailbox1_cluster11 {
-	status = "disabled";
-};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 0b6af3348e79..851e8f9be06d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -357,6 +357,7 @@ CONFIG_RMNET=m
 CONFIG_R8169=m
 CONFIG_SH_ETH=y
 CONFIG_RAVB=y
+CONFIG_RENESAS_ETHER_SWITCH=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
@@ -369,7 +370,7 @@ CONFIG_MESON_GXL_PHY=m
 CONFIG_AQUANTIA_PHY=y
 CONFIG_BCM54140_PHY=m
 CONFIG_MARVELL_PHY=m
-CONFIG_MARVELL_10G_PHY=m
+CONFIG_MARVELL_10G_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_MICROSEMI_PHY=y
 CONFIG_AT803X_PHY=y
@@ -392,6 +393,7 @@ CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_ATH10K=m
 CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SDIO=m
 CONFIG_ATH10K_SNOC=m
 CONFIG_WCN36XX=m
 CONFIG_ATH11K=m
@@ -412,6 +414,7 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
@@ -462,6 +465,10 @@ CONFIG_IPMI_HANDLER=m
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS=m
+CONFIG_TCG_TIS_SPI=m
+CONFIG_TCG_TIS_SPI_CR50=y
+CONFIG_TCG_TIS_I2C_CR50=m
 CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
@@ -505,6 +512,7 @@ CONFIG_SPI_IMX=m
 CONFIG_SPI_FSL_DSPI=y
 CONFIG_SPI_MESON_SPICC=m
 CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_MT65XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
@@ -538,9 +546,12 @@ CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8953=y
+CONFIG_PINCTRL_MSM8976=y
 CONFIG_PINCTRL_MSM8994=y
 CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
+CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
@@ -549,6 +560,7 @@ CONFIG_PINCTRL_SC7280=y
 CONFIG_PINCTRL_SC8180X=y
 CONFIG_PINCTRL_SC8280XP=y
 CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SM6115=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
 CONFIG_PINCTRL_SM8350=y
@@ -614,6 +626,7 @@ CONFIG_BRCMSTB_THERMAL=m
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_TEGRA_SOCTHERM=m
 CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_GENERIC_ADC_THERMAL=m
 CONFIG_QCOM_TSENS=y
 CONFIG_QCOM_SPMI_ADC_TM5=m
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
@@ -698,6 +711,7 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_QCOM_CAMSS=m
 CONFIG_VIDEO_QCOM_VENUS=m
 CONFIG_VIDEO_RCAR_ISP=m
@@ -759,7 +773,9 @@ CONFIG_DRM_PARADE_PS8640=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_THINE_THC63LVD1024=m
+CONFIG_DRM_TI_TFP410=m
 CONFIG_DRM_TI_SN65DSI86=m
+CONFIG_DRM_ANALOGIX_ANX7625=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_CDNS_MHDP8546=m
@@ -789,6 +805,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
+CONFIG_SND_ALOOP=m
 CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_CODEC_HDMI=m
 CONFIG_SND_SOC=y
@@ -801,6 +818,9 @@ CONFIG_SND_SOC_IMX_SGTL5000=m
 CONFIG_SND_SOC_IMX_SPDIF=m
 CONFIG_SND_SOC_FSL_ASOC_CARD=m
 CONFIG_SND_SOC_IMX_AUDMIX=m
+CONFIG_SND_SOC_MT8183=m
+CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
+CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
@@ -843,9 +863,11 @@ CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
+CONFIG_SND_SOC_RT5640=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
+CONFIG_SND_SOC_TAS2552=m
 CONFIG_SND_SOC_TAS571X=m
 CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_WCD9335=m
@@ -1003,6 +1025,7 @@ CONFIG_RTC_DRV_SNVS=m
 CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_MT6397=m
 CONFIG_RTC_DRV_XGENE=y
+CONFIG_TEGRA186_TIMER=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
@@ -1049,6 +1072,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_RS9_PCIE=y
 CONFIG_COMMON_CLK_VC5=y
 CONFIG_COMMON_CLK_NPCM8XX=y
 CONFIG_COMMON_CLK_BD718XX=m
@@ -1083,6 +1107,7 @@ CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SM_DISPCC_8250=y
+CONFIG_SM_GCC_6115=y
 CONFIG_SM_GCC_8350=y
 CONFIG_SM_GCC_8450=y
 CONFIG_SM_GPUCC_8150=y
@@ -1107,6 +1132,7 @@ CONFIG_ARM_SMMU_V3=y
 CONFIG_MTK_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
+CONFIG_MTK_SCP=m
 CONFIG_QCOM_Q6V5_ADSP=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_Q6V5_PAS=m
@@ -1124,8 +1150,10 @@ CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
 CONFIG_FSL_RCPM=y
+CONFIG_MTK_CMDQ=m
 CONFIG_MTK_DEVAPC=m
 CONFIG_MTK_PMIC_WRAP=y
+CONFIG_MTK_SVS=m
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_CPR=y
@@ -1176,6 +1204,7 @@ CONFIG_ARCH_TEGRA_234_SOC=y
 CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_IMX_BUS_DEVFREQ=m
 CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
+CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
 CONFIG_EXTCON_PTN5150=m
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
@@ -1183,6 +1212,7 @@ CONFIG_RENESAS_RPCIF=m
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_MAX9611=m
+CONFIG_MEDIATEK_MT6577_AUXADC=m
 CONFIG_QCOM_SPMI_VADC=m
 CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
@@ -1239,6 +1269,7 @@ CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
 CONFIG_PHY_QCOM_USB_SS=m
+CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
 CONFIG_PHY_RCAR_GEN3_PCIE=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
 CONFIG_PHY_RCAR_GEN3_USB3=m
@@ -1270,6 +1301,7 @@ CONFIG_NVMEM_IMX_OCOTP_SCU=y
 CONFIG_NVMEM_MTK_EFUSE=y
 CONFIG_NVMEM_QCOM_QFPROM=y
 CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+CONFIG_NVMEM_SNVS_LPGPR=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_NVMEM_UNIPHIER_EFUSE=y
 CONFIG_NVMEM_MESON_EFUSE=m
@@ -1293,12 +1325,13 @@ CONFIG_INTERCONNECT_IMX=m
 CONFIG_INTERCONNECT_IMX8MM=m
 CONFIG_INTERCONNECT_IMX8MN=m
 CONFIG_INTERCONNECT_IMX8MQ=m
+CONFIG_INTERCONNECT_IMX8MP=m
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_MSM8996=m
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCS404=m
-CONFIG_INTERCONNECT_QCOM_SC7180=m
+CONFIG_INTERCONNECT_QCOM_SC7180=y
 CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
 CONFIG_INTERCONNECT_QCOM_SC8280XP=y
@@ -1306,7 +1339,10 @@ CONFIG_INTERCONNECT_QCOM_SDM845=y
 CONFIG_INTERCONNECT_QCOM_SM8150=m
 CONFIG_INTERCONNECT_QCOM_SM8250=m
 CONFIG_INTERCONNECT_QCOM_SM8350=m
-CONFIG_INTERCONNECT_QCOM_SM8450=m
+CONFIG_INTERCONNECT_QCOM_SM8450=y
+CONFIG_HTE=y
+CONFIG_HTE_TEGRA194=y
+CONFIG_HTE_TEGRA194_TEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@@ -1341,6 +1377,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_DEV_SUN8I_CE=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
+CONFIG_CRYPTO_DEV_QCE=m
 CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_CCREE=m
 CONFIG_CRYPTO_DEV_HISI_SEC2=m
diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h
index 3622e9f4fb44..bdf1f6bcd010 100644
--- a/arch/arm64/include/asm/alternative-macros.h
+++ b/arch/arm64/include/asm/alternative-macros.h
@@ -224,7 +224,7 @@ alternative_endif
 #include <linux/types.h>
 
 static __always_inline bool
-alternative_has_feature_likely(unsigned long feature)
+alternative_has_feature_likely(const unsigned long feature)
 {
 	compiletime_assert(feature < ARM64_NCAPS,
 			   "feature must be < ARM64_NCAPS");
@@ -242,7 +242,7 @@ l_no:
 }
 
 static __always_inline bool
-alternative_has_feature_unlikely(unsigned long feature)
+alternative_has_feature_unlikely(const unsigned long feature)
 {
 	compiletime_assert(feature < ARM64_NCAPS,
 			   "feature must be < ARM64_NCAPS");
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index e5957a53be39..376a980f2bad 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -34,11 +34,6 @@
 	wx\n	.req	w\n
 	.endr
 
-	.macro save_and_disable_daif, flags
-	mrs	\flags, daif
-	msr	daifset, #0xf
-	.endm
-
 	.macro disable_daif
 	msr	daifset, #0xf
 	.endm
@@ -47,15 +42,6 @@
 	msr	daifclr, #0xf
 	.endm
 
-	.macro	restore_daif, flags:req
-	msr	daif, \flags
-	.endm
-
-	/* IRQ/FIQ are the lowest priority flags, unconditionally unmask the rest. */
-	.macro enable_da
-	msr	daifclr, #(8 | 4)
-	.endm
-
 /*
  * Save/restore interrupts.
  */
@@ -620,17 +606,6 @@ alternative_endif
 	.endm
 
 /*
- * Perform the reverse of offset_ttbr1.
- * bic is used as it can cover the immediate value and, in future, won't need
- * to be nop'ed out when dealing with 52-bit kernel VAs.
- */
-	.macro	restore_ttbr1, ttbr
-#ifdef CONFIG_ARM64_VA_BITS_52
-	bic	\ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET
-#endif
-	.endm
-
-/*
  * Arrange a physical address in a TTBR register, taking care of 52-bit
  * addresses.
  *
@@ -660,12 +635,10 @@ alternative_endif
 	.endm
 
 	.macro	pte_to_phys, phys, pte
-#ifdef CONFIG_ARM64_PA_BITS_52
-	ubfiz	\phys, \pte, #(48 - 16 - 12), #16
-	bfxil	\phys, \pte, #16, #32
-	lsl	\phys, \phys, #16
-#else
 	and	\phys, \pte, #PTE_ADDR_MASK
+#ifdef CONFIG_ARM64_PA_BITS_52
+	orr	\phys, \phys, \phys, lsl #PTE_ADDR_HIGH_SHIFT
+	and	\phys, \phys, GENMASK_ULL(PHYS_MASK_SHIFT - 1, PAGE_SHIFT)
 #endif
 	.endm
 
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index f73f11b55042..03d1c9d7af82 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -832,7 +832,8 @@ static inline bool system_supports_tlb_range(void)
 		cpus_have_const_cap(ARM64_HAS_TLB_RANGE);
 }
 
-extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
+int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
+bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
 static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange)
 {
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 65e53ef5a396..4e8b66c74ea2 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -80,6 +80,7 @@
 #define ARM_CPU_PART_CORTEX_X1		0xD44
 #define ARM_CPU_PART_CORTEX_A510	0xD46
 #define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_A715	0xD4D
 #define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 #define ARM_CPU_PART_CORTEX_A78C	0xD4B
@@ -142,6 +143,7 @@
 #define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_A715 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A715)
 #define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index d6cf535d8352..439e2bc5d5d8 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -14,16 +14,8 @@
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
-
-bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
 #else
 #define efi_init()
-
-static inline
-bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
-{
-	return false;
-}
 #endif
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 19713d0f013b..92963f98afec 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -58,7 +58,8 @@ asmlinkage void call_on_irq_stack(struct pt_regs *regs,
 asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs);
 
 void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs);
-void do_undefinstr(struct pt_regs *regs, unsigned long esr);
+void do_el0_undef(struct pt_regs *regs, unsigned long esr);
+void do_el1_undef(struct pt_regs *regs, unsigned long esr);
 void do_el0_bti(struct pt_regs *regs);
 void do_el1_bti(struct pt_regs *regs, unsigned long esr);
 void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
@@ -67,10 +68,10 @@ void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
 void do_sve_acc(unsigned long esr, struct pt_regs *regs);
 void do_sme_acc(unsigned long esr, struct pt_regs *regs);
 void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs);
-void do_sysinstr(unsigned long esr, struct pt_regs *regs);
+void do_el0_sys(unsigned long esr, struct pt_regs *regs);
 void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs);
 void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr);
-void do_cp15instr(unsigned long esr, struct pt_regs *regs);
+void do_el0_cp15(unsigned long esr, struct pt_regs *regs);
 int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs);
 void do_el0_svc(struct pt_regs *regs);
 void do_el0_svc_compat(struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 6f86b7ab6c28..e6fa1e2982c8 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -56,11 +56,20 @@ extern void fpsimd_signal_preserve_current_state(void);
 extern void fpsimd_preserve_current_state(void);
 extern void fpsimd_restore_current_state(void);
 extern void fpsimd_update_current_state(struct user_fpsimd_state const *state);
+extern void fpsimd_kvm_prepare(void);
+
+struct cpu_fp_state {
+	struct user_fpsimd_state *st;
+	void *sve_state;
+	void *za_state;
+	u64 *svcr;
+	unsigned int sve_vl;
+	unsigned int sme_vl;
+	enum fp_type *fp_type;
+	enum fp_type to_save;
+};
 
-extern void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *state,
-				     void *sve_state, unsigned int sve_vl,
-				     void *za_state, unsigned int sme_vl,
-				     u64 *svcr);
+extern void fpsimd_bind_state_to_cpu(struct cpu_fp_state *fp_state);
 
 extern void fpsimd_flush_task_state(struct task_struct *target);
 extern void fpsimd_save_and_flush_cpu_state(void);
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
index 329dbbd4d50b..5664729800ae 100644
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@@ -23,7 +23,7 @@
  */
 #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #else
 #define MCOUNT_ADDR		((unsigned long)_mcount)
@@ -33,8 +33,7 @@
 #define MCOUNT_INSN_SIZE	AARCH64_INSN_SIZE
 
 #define FTRACE_PLT_IDX		0
-#define FTRACE_REGS_PLT_IDX	1
-#define NR_FTRACE_PLTS		2
+#define NR_FTRACE_PLTS		1
 
 /*
  * Currently, gcc tends to save the link register after the local variables
@@ -69,7 +68,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 	 * Adjust addr to point at the BL in the callsite.
 	 * See ftrace_init_nop() for the callsite sequence.
 	 */
-	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS))
+	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS))
 		return addr + AARCH64_INSN_SIZE;
 	/*
 	 * addr is the address of the mcount call instruction.
@@ -78,10 +77,71 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 	return addr;
 }
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 struct dyn_ftrace;
 struct ftrace_ops;
-struct ftrace_regs;
+
+#define arch_ftrace_get_regs(regs) NULL
+
+struct ftrace_regs {
+	/* x0 - x8 */
+	unsigned long regs[9];
+	unsigned long __unused;
+
+	unsigned long fp;
+	unsigned long lr;
+
+	unsigned long sp;
+	unsigned long pc;
+};
+
+static __always_inline unsigned long
+ftrace_regs_get_instruction_pointer(const struct ftrace_regs *fregs)
+{
+	return fregs->pc;
+}
+
+static __always_inline void
+ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
+				    unsigned long pc)
+{
+	fregs->pc = pc;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_stack_pointer(const struct ftrace_regs *fregs)
+{
+	return fregs->sp;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_argument(struct ftrace_regs *fregs, unsigned int n)
+{
+	if (n < 8)
+		return fregs->regs[n];
+	return 0;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_return_value(const struct ftrace_regs *fregs)
+{
+	return fregs->regs[0];
+}
+
+static __always_inline void
+ftrace_regs_set_return_value(struct ftrace_regs *fregs,
+			     unsigned long ret)
+{
+	fregs->regs[0] = ret;
+}
+
+static __always_inline void
+ftrace_override_function_with_return(struct ftrace_regs *fregs)
+{
+	fregs->pc = fregs->lr;
+}
+
+int ftrace_regs_query_register_offset(const char *name);
 
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
 #define ftrace_init_nop ftrace_init_nop
diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
index d20f5da2d76f..6a4a1ab8eb23 100644
--- a/arch/arm64/include/asm/hugetlb.h
+++ b/arch/arm64/include/asm/hugetlb.h
@@ -49,6 +49,15 @@ extern pte_t huge_ptep_get(pte_t *ptep);
 
 void __init arm64_hugetlb_cma_reserve(void);
 
+#define huge_ptep_modify_prot_start huge_ptep_modify_prot_start
+extern pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep);
+
+#define huge_ptep_modify_prot_commit huge_ptep_modify_prot_commit
+extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep,
+					 pte_t old_pte, pte_t new_pte);
+
 #include <asm-generic/hugetlb.h>
 
 #endif /* __ASM_HUGETLB_H */
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 298b386d3ebe..06dd12c514e6 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -120,6 +120,9 @@
 #define KERNEL_HWCAP_WFXT		__khwcap2_feature(WFXT)
 #define KERNEL_HWCAP_EBF16		__khwcap2_feature(EBF16)
 #define KERNEL_HWCAP_SVE_EBF16		__khwcap2_feature(SVE_EBF16)
+#define KERNEL_HWCAP_CSSC		__khwcap2_feature(CSSC)
+#define KERNEL_HWCAP_RPRFM		__khwcap2_feature(RPRFM)
+#define KERNEL_HWCAP_SVE2P1		__khwcap2_feature(SVE2P1)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index 834bff720582..aaf1f52fbf3e 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -13,31 +13,6 @@
 #include <asm/insn-def.h>
 
 #ifndef __ASSEMBLY__
-/*
- * ARM Architecture Reference Manual for ARMv8 Profile-A, Issue A.a
- * Section C3.1 "A64 instruction index by encoding":
- * AArch64 main encoding table
- *  Bit position
- *   28 27 26 25	Encoding Group
- *   0  0  -  -		Unallocated
- *   1  0  0  -		Data processing, immediate
- *   1  0  1  -		Branch, exception generation and system instructions
- *   -  1  -  0		Loads and stores
- *   -  1  0  1		Data processing - register
- *   0  1  1  1		Data processing - SIMD and floating point
- *   1  1  1  1		Data processing - SIMD and floating point
- * "-" means "don't care"
- */
-enum aarch64_insn_encoding_class {
-	AARCH64_INSN_CLS_UNKNOWN,	/* UNALLOCATED */
-	AARCH64_INSN_CLS_SVE,		/* SVE instructions */
-	AARCH64_INSN_CLS_DP_IMM,	/* Data processing - immediate */
-	AARCH64_INSN_CLS_DP_REG,	/* Data processing - register */
-	AARCH64_INSN_CLS_DP_FPSIMD,	/* Data processing - SIMD and FP */
-	AARCH64_INSN_CLS_LDST,		/* Loads and stores */
-	AARCH64_INSN_CLS_BR_SYS,	/* Branch, exception generation and
-					 * system instructions */
-};
 
 enum aarch64_insn_hint_cr_op {
 	AARCH64_INSN_HINT_NOP	= 0x0 << 5,
@@ -326,6 +301,23 @@ static __always_inline u32 aarch64_insn_get_##abbr##_value(void)	\
 	return (val);							\
 }
 
+/*
+ * ARM Architecture Reference Manual for ARMv8 Profile-A, Issue A.a
+ * Section C3.1 "A64 instruction index by encoding":
+ * AArch64 main encoding table
+ *  Bit position
+ *   28 27 26 25	Encoding Group
+ *   0  0  -  -		Unallocated
+ *   1  0  0  -		Data processing, immediate
+ *   1  0  1  -		Branch, exception generation and system instructions
+ *   -  1  -  0		Loads and stores
+ *   -  1  0  1		Data processing - register
+ *   0  1  1  1		Data processing - SIMD and floating point
+ *   1  1  1  1		Data processing - SIMD and floating point
+ * "-" means "don't care"
+ */
+__AARCH64_INSN_FUNCS(class_branch_sys,	0x1c000000, 0x14000000)
+
 __AARCH64_INSN_FUNCS(adr,	0x9F000000, 0x10000000)
 __AARCH64_INSN_FUNCS(adrp,	0x9F000000, 0x90000000)
 __AARCH64_INSN_FUNCS(prfm,	0x3FC00000, 0x39800000)
@@ -431,58 +423,122 @@ __AARCH64_INSN_FUNCS(pssbb,	0xFFFFFFFF, 0xD503349F)
 
 #undef	__AARCH64_INSN_FUNCS
 
-bool aarch64_insn_is_steppable_hint(u32 insn);
-bool aarch64_insn_is_branch_imm(u32 insn);
+static __always_inline bool aarch64_insn_is_steppable_hint(u32 insn)
+{
+	if (!aarch64_insn_is_hint(insn))
+		return false;
+
+	switch (insn & 0xFE0) {
+	case AARCH64_INSN_HINT_XPACLRI:
+	case AARCH64_INSN_HINT_PACIA_1716:
+	case AARCH64_INSN_HINT_PACIB_1716:
+	case AARCH64_INSN_HINT_PACIAZ:
+	case AARCH64_INSN_HINT_PACIASP:
+	case AARCH64_INSN_HINT_PACIBZ:
+	case AARCH64_INSN_HINT_PACIBSP:
+	case AARCH64_INSN_HINT_BTI:
+	case AARCH64_INSN_HINT_BTIC:
+	case AARCH64_INSN_HINT_BTIJ:
+	case AARCH64_INSN_HINT_BTIJC:
+	case AARCH64_INSN_HINT_NOP:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static __always_inline bool aarch64_insn_is_branch(u32 insn)
+{
+	/* b, bl, cb*, tb*, ret*, b.cond, br*, blr* */
+
+	return aarch64_insn_is_b(insn) ||
+	       aarch64_insn_is_bl(insn) ||
+	       aarch64_insn_is_cbz(insn) ||
+	       aarch64_insn_is_cbnz(insn) ||
+	       aarch64_insn_is_tbz(insn) ||
+	       aarch64_insn_is_tbnz(insn) ||
+	       aarch64_insn_is_ret(insn) ||
+	       aarch64_insn_is_ret_auth(insn) ||
+	       aarch64_insn_is_br(insn) ||
+	       aarch64_insn_is_br_auth(insn) ||
+	       aarch64_insn_is_blr(insn) ||
+	       aarch64_insn_is_blr_auth(insn) ||
+	       aarch64_insn_is_bcond(insn);
+}
 
-static inline bool aarch64_insn_is_adr_adrp(u32 insn)
+static __always_inline bool aarch64_insn_is_branch_imm(u32 insn)
 {
-	return aarch64_insn_is_adr(insn) || aarch64_insn_is_adrp(insn);
+	return aarch64_insn_is_b(insn) ||
+	       aarch64_insn_is_bl(insn) ||
+	       aarch64_insn_is_tbz(insn) ||
+	       aarch64_insn_is_tbnz(insn) ||
+	       aarch64_insn_is_cbz(insn) ||
+	       aarch64_insn_is_cbnz(insn) ||
+	       aarch64_insn_is_bcond(insn);
 }
 
-static inline bool aarch64_insn_is_dsb(u32 insn)
+static __always_inline bool aarch64_insn_is_adr_adrp(u32 insn)
 {
-	return aarch64_insn_is_dsb_base(insn) || aarch64_insn_is_dsb_nxs(insn);
+	return aarch64_insn_is_adr(insn) ||
+	       aarch64_insn_is_adrp(insn);
 }
 
-static inline bool aarch64_insn_is_barrier(u32 insn)
+static __always_inline bool aarch64_insn_is_dsb(u32 insn)
 {
-	return aarch64_insn_is_dmb(insn) || aarch64_insn_is_dsb(insn) ||
-	       aarch64_insn_is_isb(insn) || aarch64_insn_is_sb(insn) ||
-	       aarch64_insn_is_clrex(insn) || aarch64_insn_is_ssbb(insn) ||
+	return aarch64_insn_is_dsb_base(insn) ||
+	       aarch64_insn_is_dsb_nxs(insn);
+}
+
+static __always_inline bool aarch64_insn_is_barrier(u32 insn)
+{
+	return aarch64_insn_is_dmb(insn) ||
+	       aarch64_insn_is_dsb(insn) ||
+	       aarch64_insn_is_isb(insn) ||
+	       aarch64_insn_is_sb(insn) ||
+	       aarch64_insn_is_clrex(insn) ||
+	       aarch64_insn_is_ssbb(insn) ||
 	       aarch64_insn_is_pssbb(insn);
 }
 
-static inline bool aarch64_insn_is_store_single(u32 insn)
+static __always_inline bool aarch64_insn_is_store_single(u32 insn)
 {
 	return aarch64_insn_is_store_imm(insn) ||
 	       aarch64_insn_is_store_pre(insn) ||
 	       aarch64_insn_is_store_post(insn);
 }
 
-static inline bool aarch64_insn_is_store_pair(u32 insn)
+static __always_inline bool aarch64_insn_is_store_pair(u32 insn)
 {
 	return aarch64_insn_is_stp(insn) ||
 	       aarch64_insn_is_stp_pre(insn) ||
 	       aarch64_insn_is_stp_post(insn);
 }
 
-static inline bool aarch64_insn_is_load_single(u32 insn)
+static __always_inline bool aarch64_insn_is_load_single(u32 insn)
 {
 	return aarch64_insn_is_load_imm(insn) ||
 	       aarch64_insn_is_load_pre(insn) ||
 	       aarch64_insn_is_load_post(insn);
 }
 
-static inline bool aarch64_insn_is_load_pair(u32 insn)
+static __always_inline bool aarch64_insn_is_load_pair(u32 insn)
 {
 	return aarch64_insn_is_ldp(insn) ||
 	       aarch64_insn_is_ldp_pre(insn) ||
 	       aarch64_insn_is_ldp_post(insn);
 }
 
+static __always_inline bool aarch64_insn_uses_literal(u32 insn)
+{
+	/* ldr/ldrsw (literal), prfm */
+
+	return aarch64_insn_is_ldr_lit(insn) ||
+	       aarch64_insn_is_ldrsw_lit(insn) ||
+	       aarch64_insn_is_adr_adrp(insn) ||
+	       aarch64_insn_is_prfm_lit(insn);
+}
+
 enum aarch64_insn_encoding_class aarch64_get_insn_class(u32 insn);
-bool aarch64_insn_uses_literal(u32 insn);
-bool aarch64_insn_is_branch(u32 insn);
 u64 aarch64_insn_decode_immediate(enum aarch64_insn_imm_type type, u32 insn);
 u32 aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type,
 				  u32 insn, u64 imm);
@@ -496,8 +552,18 @@ u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
 				     enum aarch64_insn_branch_type type);
 u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr,
 				     enum aarch64_insn_condition cond);
-u32 aarch64_insn_gen_hint(enum aarch64_insn_hint_cr_op op);
-u32 aarch64_insn_gen_nop(void);
+
+static __always_inline u32
+aarch64_insn_gen_hint(enum aarch64_insn_hint_cr_op op)
+{
+	return aarch64_insn_get_hint_value() | op;
+}
+
+static __always_inline u32 aarch64_insn_gen_nop(void)
+{
+	return aarch64_insn_gen_hint(AARCH64_INSN_HINT_NOP);
+}
+
 u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg,
 				enum aarch64_insn_branch_type type);
 u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg,
@@ -580,10 +646,6 @@ u32 aarch64_insn_gen_extr(enum aarch64_insn_variant variant,
 			  enum aarch64_insn_register Rn,
 			  enum aarch64_insn_register Rd,
 			  u8 lsb);
-u32 aarch64_insn_gen_prefetch(enum aarch64_insn_register base,
-			      enum aarch64_insn_prfm_type type,
-			      enum aarch64_insn_prfm_target target,
-			      enum aarch64_insn_prfm_policy policy);
 #ifdef CONFIG_ARM64_LSE_ATOMICS
 u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
 				  enum aarch64_insn_register address,
diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
index cea441b6aa5d..48ddc0f45d22 100644
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@@ -15,8 +15,8 @@
 
 #define JUMP_LABEL_NOP_SIZE		AARCH64_INSN_SIZE
 
-static __always_inline bool arch_static_branch(struct static_key *key,
-					       bool branch)
+static __always_inline bool arch_static_branch(struct static_key * const key,
+					       const bool branch)
 {
 	asm_volatile_goto(
 		"1:	nop					\n\t"
@@ -32,8 +32,8 @@ l_yes:
 	return true;
 }
 
-static __always_inline bool arch_static_branch_jump(struct static_key *key,
-						    bool branch)
+static __always_inline bool arch_static_branch_jump(struct static_key * const key,
+						    const bool branch)
 {
 	asm_volatile_goto(
 		"1:	b		%l[l_yes]		\n\t"
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index 32d14f481f0c..fcd14197756f 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -18,11 +18,6 @@
  * with 4K (section size = 2M) but not with 16K (section size = 32M) or
  * 64K (section size = 512M).
  */
-#ifdef CONFIG_ARM64_4K_PAGES
-#define ARM64_KERNEL_USES_PMD_MAPS 1
-#else
-#define ARM64_KERNEL_USES_PMD_MAPS 0
-#endif
 
 /*
  * The idmap and swapper page tables need some space reserved in the kernel
@@ -34,7 +29,7 @@
  * VA range, so pages required to map highest possible PA are reserved in all
  * cases.
  */
-#if ARM64_KERNEL_USES_PMD_MAPS
+#ifdef CONFIG_ARM64_4K_PAGES
 #define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS - 1)
 #else
 #define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS)
@@ -96,7 +91,7 @@
 #define INIT_IDMAP_DIR_PAGES	EARLY_PAGES(KIMAGE_VADDR, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE, 1)
 
 /* Initial memory map size */
-#if ARM64_KERNEL_USES_PMD_MAPS
+#ifdef CONFIG_ARM64_4K_PAGES
 #define SWAPPER_BLOCK_SHIFT	PMD_SHIFT
 #define SWAPPER_BLOCK_SIZE	PMD_SIZE
 #define SWAPPER_TABLE_SHIFT	PUD_SHIFT
@@ -112,7 +107,7 @@
 #define SWAPPER_PTE_FLAGS	(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
 #define SWAPPER_PMD_FLAGS	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
 
-#if ARM64_KERNEL_USES_PMD_MAPS
+#ifdef CONFIG_ARM64_4K_PAGES
 #define SWAPPER_RW_MMUFLAGS	(PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
 #define SWAPPER_RX_MMUFLAGS	(SWAPPER_RW_MMUFLAGS | PMD_SECT_RDONLY)
 #else
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 45e2136322ba..fd34ab155d0b 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -306,8 +306,18 @@ struct vcpu_reset_state {
 struct kvm_vcpu_arch {
 	struct kvm_cpu_context ctxt;
 
-	/* Guest floating point state */
+	/*
+	 * Guest floating point state
+	 *
+	 * The architecture has two main floating point extensions,
+	 * the original FPSIMD and SVE.  These have overlapping
+	 * register views, with the FPSIMD V registers occupying the
+	 * low 128 bits of the SVE Z registers.  When the core
+	 * floating point code saves the register state of a task it
+	 * records which view it saved in fp_type.
+	 */
 	void *sve_state;
+	enum fp_type fp_type;
 	unsigned int sve_max_vl;
 	u64 svcr;
 
diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h
index c503db8e73b0..f99d74826a7e 100644
--- a/arch/arm64/include/asm/lse.h
+++ b/arch/arm64/include/asm/lse.h
@@ -10,7 +10,6 @@
 
 #include <linux/compiler_types.h>
 #include <linux/export.h>
-#include <linux/jump_label.h>
 #include <linux/stringify.h>
 #include <asm/alternative.h>
 #include <asm/alternative-macros.h>
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index d3f8b5df0c1f..72dbd6400549 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -18,6 +18,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cpufeature.h>
+#include <asm/daifflags.h>
 #include <asm/proc-fns.h>
 #include <asm-generic/mm_hooks.h>
 #include <asm/cputype.h>
@@ -152,6 +153,7 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
 	typedef void (ttbr_replace_func)(phys_addr_t);
 	extern ttbr_replace_func idmap_cpu_replace_ttbr1;
 	ttbr_replace_func *replace_phys;
+	unsigned long daif;
 
 	/* phys_to_ttbr() zeros lower 2 bits of ttbr with 52-bit PA */
 	phys_addr_t ttbr1 = phys_to_ttbr(virt_to_phys(pgdp));
@@ -171,7 +173,15 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
 	replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1);
 
 	__cpu_install_idmap(idmap);
+
+	/*
+	 * We really don't want to take *any* exceptions while TTBR1 is
+	 * in the process of being replaced so mask everything.
+	 */
+	daif = local_daif_save();
 	replace_phys(ttbr1);
+	local_daif_restore(daif);
+
 	cpu_uninstall_idmap();
 }
 
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
index 094701ec5500..dbba4b7559aa 100644
--- a/arch/arm64/include/asm/module.lds.h
+++ b/arch/arm64/include/asm/module.lds.h
@@ -17,4 +17,12 @@ SECTIONS {
 	 */
 	.text.hot : { *(.text.hot) }
 #endif
+
+#ifdef CONFIG_UNWIND_TABLES
+	/*
+	 * Currently, we only use unwind info at module load time, so we can
+	 * put it into the .init allocation.
+	 */
+	.init.eh_frame : { *(.eh_frame) }
+#endif
 }
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 5ab8d163198f..f658aafc47df 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -159,6 +159,7 @@
 #ifdef CONFIG_ARM64_PA_BITS_52
 #define PTE_ADDR_HIGH		(_AT(pteval_t, 0xf) << 12)
 #define PTE_ADDR_MASK		(PTE_ADDR_LOW | PTE_ADDR_HIGH)
+#define PTE_ADDR_HIGH_SHIFT	36
 #else
 #define PTE_ADDR_MASK		PTE_ADDR_LOW
 #endif
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 71a1af42f0e8..c36d56dbf940 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -77,11 +77,11 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 static inline phys_addr_t __pte_to_phys(pte_t pte)
 {
 	return (pte_val(pte) & PTE_ADDR_LOW) |
-		((pte_val(pte) & PTE_ADDR_HIGH) << 36);
+		((pte_val(pte) & PTE_ADDR_HIGH) << PTE_ADDR_HIGH_SHIFT);
 }
 static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
 {
-	return (phys | (phys >> 36)) & PTE_ADDR_MASK;
+	return (phys | (phys >> PTE_ADDR_HIGH_SHIFT)) & PTE_ADDR_MASK;
 }
 #else
 #define __pte_to_phys(pte)	(pte_val(pte) & PTE_ADDR_MASK)
@@ -609,7 +609,6 @@ extern pgd_t init_pg_dir[PTRS_PER_PGD];
 extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
-extern pgd_t idmap_pg_end[];
 extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
 extern pgd_t reserved_pg_dir[PTRS_PER_PGD];
 
@@ -863,12 +862,12 @@ static inline bool pte_user_accessible_page(pte_t pte)
 
 static inline bool pmd_user_accessible_page(pmd_t pmd)
 {
-	return pmd_present(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
+	return pmd_leaf(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
 }
 
 static inline bool pud_user_accessible_page(pud_t pud)
 {
-	return pud_present(pud) && pud_user(pud);
+	return pud_leaf(pud) && pud_user(pud);
 }
 #endif
 
@@ -1096,6 +1095,15 @@ static inline bool pud_sect_supported(void)
 }
 
 
+#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+#define ptep_modify_prot_start ptep_modify_prot_start
+extern pte_t ptep_modify_prot_start(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep);
+
+#define ptep_modify_prot_commit ptep_modify_prot_commit
+extern void ptep_modify_prot_commit(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep,
+				    pte_t old_pte, pte_t new_pte);
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_PGTABLE_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 445aa3af3b76..d51b32a69309 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -122,6 +122,12 @@ enum vec_type {
 	ARM64_VEC_MAX,
 };
 
+enum fp_type {
+	FP_STATE_CURRENT,	/* Save based on current task state. */
+	FP_STATE_FPSIMD,
+	FP_STATE_SVE,
+};
+
 struct cpu_context {
 	unsigned long x19;
 	unsigned long x20;
@@ -152,6 +158,7 @@ struct thread_struct {
 		struct user_fpsimd_state fpsimd_state;
 	} uw;
 
+	enum fp_type		fp_type;	/* registers FPSIMD or SVE? */
 	unsigned int		fpsimd_cpu;
 	void			*sve_state;	/* SVE registers, if any */
 	void			*za_state;	/* ZA register, if any */
@@ -308,13 +315,13 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 }
 #endif
 
-static inline bool is_ttbr0_addr(unsigned long addr)
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
 {
 	/* entry assembly clears tags for TTBR0 addrs */
 	return addr < TASK_SIZE;
 }
 
-static inline bool is_ttbr1_addr(unsigned long addr)
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
 {
 	/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
 	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
@@ -396,18 +403,5 @@ long get_tagged_addr_ctrl(struct task_struct *task);
 #define GET_TAGGED_ADDR_CTRL()		get_tagged_addr_ctrl(current)
 #endif
 
-/*
- * For CONFIG_GCC_PLUGIN_STACKLEAK
- *
- * These need to be macros because otherwise we get stuck in a nightmare
- * of header definitions for the use of task_stack_page.
- */
-
-/*
- * The top of the current task's task stack
- */
-#define current_top_of_stack()	((unsigned long)current->stack + THREAD_SIZE)
-#define on_thread_stack()	(on_task_stack(current, current_stack_pointer, 1))
-
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/scs.h b/arch/arm64/include/asm/scs.h
index 8297bccf0784..ff7da1268a52 100644
--- a/arch/arm64/include/asm/scs.h
+++ b/arch/arm64/include/asm/scs.h
@@ -5,6 +5,7 @@
 #ifdef __ASSEMBLY__
 
 #include <asm/asm-offsets.h>
+#include <asm/sysreg.h>
 
 #ifdef CONFIG_SHADOW_CALL_STACK
 	scs_sp	.req	x18
@@ -24,6 +25,54 @@
 	.endm
 #endif /* CONFIG_SHADOW_CALL_STACK */
 
+
+#else
+
+#include <linux/scs.h>
+#include <asm/cpufeature.h>
+
+#ifdef CONFIG_UNWIND_PATCH_PAC_INTO_SCS
+static inline bool should_patch_pac_into_scs(void)
+{
+	u64 reg;
+
+	/*
+	 * We only enable the shadow call stack dynamically if we are running
+	 * on a system that does not implement PAC or BTI. PAC and SCS provide
+	 * roughly the same level of protection, and BTI relies on the PACIASP
+	 * instructions serving as landing pads, preventing us from patching
+	 * those instructions into something else.
+	 */
+	reg = read_sysreg_s(SYS_ID_AA64ISAR1_EL1);
+	if (SYS_FIELD_GET(ID_AA64ISAR1_EL1, APA, reg) |
+	    SYS_FIELD_GET(ID_AA64ISAR1_EL1, API, reg))
+		return false;
+
+	reg = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	if (SYS_FIELD_GET(ID_AA64ISAR2_EL1, APA3, reg))
+		return false;
+
+	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) {
+		reg = read_sysreg_s(SYS_ID_AA64PFR1_EL1);
+		if (reg & (0xf << ID_AA64PFR1_EL1_BT_SHIFT))
+			return false;
+	}
+	return true;
+}
+
+static inline void dynamic_scs_init(void)
+{
+	if (should_patch_pac_into_scs()) {
+		pr_info("Enabling dynamic shadow call stack\n");
+		static_branch_enable(&dynamic_scs_enabled);
+	}
+}
+#else
+static inline void dynamic_scs_init(void) {}
+#endif
+
+int scs_patch(const u8 eh_frame[], int size);
+
 #endif /* __ASSEMBLY __ */
 
 #endif /* _ASM_SCS_H */
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index aa3d3607d5c8..db7b371b367c 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -26,6 +26,7 @@ enum mitigation_state {
 	SPECTRE_VULNERABLE,
 };
 
+struct pt_regs;
 struct task_struct;
 
 /*
@@ -98,5 +99,6 @@ enum mitigation_state arm64_get_spectre_bhb_state(void);
 bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
 u8 spectre_bhb_loop_affected(int scope);
 void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr);
 #endif	/* __ASSEMBLY__ */
 #endif	/* __ASM_SPECTRE_H */
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
index 5a0edb064ea4..4e5354beafb0 100644
--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -57,6 +57,8 @@ static inline bool on_task_stack(const struct task_struct *tsk,
 	return stackinfo_on_stack(&info, sp, size);
 }
 
+#define on_thread_stack()	(on_task_stack(current, current_stack_pointer, 1))
+
 #ifdef CONFIG_VMAP_STACK
 DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
 
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 7d301700d1a9..1312fb48f18b 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -90,20 +90,24 @@
  */
 #define pstate_field(op1, op2)		((op1) << Op1_shift | (op2) << Op2_shift)
 #define PSTATE_Imm_shift		CRm_shift
+#define SET_PSTATE(x, r)		__emit_inst(0xd500401f | PSTATE_ ## r | ((!!x) << PSTATE_Imm_shift))
 
 #define PSTATE_PAN			pstate_field(0, 4)
 #define PSTATE_UAO			pstate_field(0, 3)
 #define PSTATE_SSBS			pstate_field(3, 1)
+#define PSTATE_DIT			pstate_field(3, 2)
 #define PSTATE_TCO			pstate_field(3, 4)
 
-#define SET_PSTATE_PAN(x)		__emit_inst(0xd500401f | PSTATE_PAN | ((!!x) << PSTATE_Imm_shift))
-#define SET_PSTATE_UAO(x)		__emit_inst(0xd500401f | PSTATE_UAO | ((!!x) << PSTATE_Imm_shift))
-#define SET_PSTATE_SSBS(x)		__emit_inst(0xd500401f | PSTATE_SSBS | ((!!x) << PSTATE_Imm_shift))
-#define SET_PSTATE_TCO(x)		__emit_inst(0xd500401f | PSTATE_TCO | ((!!x) << PSTATE_Imm_shift))
+#define SET_PSTATE_PAN(x)		SET_PSTATE((x), PAN)
+#define SET_PSTATE_UAO(x)		SET_PSTATE((x), UAO)
+#define SET_PSTATE_SSBS(x)		SET_PSTATE((x), SSBS)
+#define SET_PSTATE_DIT(x)		SET_PSTATE((x), DIT)
+#define SET_PSTATE_TCO(x)		SET_PSTATE((x), TCO)
 
 #define set_pstate_pan(x)		asm volatile(SET_PSTATE_PAN(x))
 #define set_pstate_uao(x)		asm volatile(SET_PSTATE_UAO(x))
 #define set_pstate_ssbs(x)		asm volatile(SET_PSTATE_SSBS(x))
+#define set_pstate_dit(x)		asm volatile(SET_PSTATE_DIT(x))
 
 #define __SYS_BARRIER_INSN(CRm, op2, Rt) \
 	__emit_inst(0xd5000000 | sys_insn(0, 3, 3, (CRm), (op2)) | ((Rt) & 0x1f))
@@ -165,31 +169,6 @@
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
 
-#define SYS_ID_PFR0_EL1			sys_reg(3, 0, 0, 1, 0)
-#define SYS_ID_PFR1_EL1			sys_reg(3, 0, 0, 1, 1)
-#define SYS_ID_PFR2_EL1			sys_reg(3, 0, 0, 3, 4)
-#define SYS_ID_DFR0_EL1			sys_reg(3, 0, 0, 1, 2)
-#define SYS_ID_DFR1_EL1			sys_reg(3, 0, 0, 3, 5)
-#define SYS_ID_AFR0_EL1			sys_reg(3, 0, 0, 1, 3)
-#define SYS_ID_MMFR0_EL1		sys_reg(3, 0, 0, 1, 4)
-#define SYS_ID_MMFR1_EL1		sys_reg(3, 0, 0, 1, 5)
-#define SYS_ID_MMFR2_EL1		sys_reg(3, 0, 0, 1, 6)
-#define SYS_ID_MMFR3_EL1		sys_reg(3, 0, 0, 1, 7)
-#define SYS_ID_MMFR4_EL1		sys_reg(3, 0, 0, 2, 6)
-#define SYS_ID_MMFR5_EL1		sys_reg(3, 0, 0, 3, 6)
-
-#define SYS_ID_ISAR0_EL1		sys_reg(3, 0, 0, 2, 0)
-#define SYS_ID_ISAR1_EL1		sys_reg(3, 0, 0, 2, 1)
-#define SYS_ID_ISAR2_EL1		sys_reg(3, 0, 0, 2, 2)
-#define SYS_ID_ISAR3_EL1		sys_reg(3, 0, 0, 2, 3)
-#define SYS_ID_ISAR4_EL1		sys_reg(3, 0, 0, 2, 4)
-#define SYS_ID_ISAR5_EL1		sys_reg(3, 0, 0, 2, 5)
-#define SYS_ID_ISAR6_EL1		sys_reg(3, 0, 0, 2, 7)
-
-#define SYS_MVFR0_EL1			sys_reg(3, 0, 0, 3, 0)
-#define SYS_MVFR1_EL1			sys_reg(3, 0, 0, 3, 1)
-#define SYS_MVFR2_EL1			sys_reg(3, 0, 0, 3, 2)
-
 #define SYS_ACTLR_EL1			sys_reg(3, 0, 1, 0, 1)
 #define SYS_RGSR_EL1			sys_reg(3, 0, 1, 0, 5)
 #define SYS_GCR_EL1			sys_reg(3, 0, 1, 0, 6)
@@ -692,112 +671,6 @@
 #define ID_AA64MMFR0_EL1_PARANGE_MAX	ID_AA64MMFR0_EL1_PARANGE_48
 #endif
 
-#define ID_DFR0_PERFMON_SHIFT		24
-
-#define ID_DFR0_PERFMON_8_0		0x3
-#define ID_DFR0_PERFMON_8_1		0x4
-#define ID_DFR0_PERFMON_8_4		0x5
-#define ID_DFR0_PERFMON_8_5		0x6
-
-#define ID_ISAR4_SWP_FRAC_SHIFT		28
-#define ID_ISAR4_PSR_M_SHIFT		24
-#define ID_ISAR4_SYNCH_PRIM_FRAC_SHIFT	20
-#define ID_ISAR4_BARRIER_SHIFT		16
-#define ID_ISAR4_SMC_SHIFT		12
-#define ID_ISAR4_WRITEBACK_SHIFT	8
-#define ID_ISAR4_WITHSHIFTS_SHIFT	4
-#define ID_ISAR4_UNPRIV_SHIFT		0
-
-#define ID_DFR1_MTPMU_SHIFT		0
-
-#define ID_ISAR0_DIVIDE_SHIFT		24
-#define ID_ISAR0_DEBUG_SHIFT		20
-#define ID_ISAR0_COPROC_SHIFT		16
-#define ID_ISAR0_CMPBRANCH_SHIFT	12
-#define ID_ISAR0_BITFIELD_SHIFT		8
-#define ID_ISAR0_BITCOUNT_SHIFT		4
-#define ID_ISAR0_SWAP_SHIFT		0
-
-#define ID_ISAR5_RDM_SHIFT		24
-#define ID_ISAR5_CRC32_SHIFT		16
-#define ID_ISAR5_SHA2_SHIFT		12
-#define ID_ISAR5_SHA1_SHIFT		8
-#define ID_ISAR5_AES_SHIFT		4
-#define ID_ISAR5_SEVL_SHIFT		0
-
-#define ID_ISAR6_I8MM_SHIFT		24
-#define ID_ISAR6_BF16_SHIFT		20
-#define ID_ISAR6_SPECRES_SHIFT		16
-#define ID_ISAR6_SB_SHIFT		12
-#define ID_ISAR6_FHM_SHIFT		8
-#define ID_ISAR6_DP_SHIFT		4
-#define ID_ISAR6_JSCVT_SHIFT		0
-
-#define ID_MMFR0_INNERSHR_SHIFT		28
-#define ID_MMFR0_FCSE_SHIFT		24
-#define ID_MMFR0_AUXREG_SHIFT		20
-#define ID_MMFR0_TCM_SHIFT		16
-#define ID_MMFR0_SHARELVL_SHIFT		12
-#define ID_MMFR0_OUTERSHR_SHIFT		8
-#define ID_MMFR0_PMSA_SHIFT		4
-#define ID_MMFR0_VMSA_SHIFT		0
-
-#define ID_MMFR4_EVT_SHIFT		28
-#define ID_MMFR4_CCIDX_SHIFT		24
-#define ID_MMFR4_LSM_SHIFT		20
-#define ID_MMFR4_HPDS_SHIFT		16
-#define ID_MMFR4_CNP_SHIFT		12
-#define ID_MMFR4_XNX_SHIFT		8
-#define ID_MMFR4_AC2_SHIFT		4
-#define ID_MMFR4_SPECSEI_SHIFT		0
-
-#define ID_MMFR5_ETS_SHIFT		0
-
-#define ID_PFR0_DIT_SHIFT		24
-#define ID_PFR0_CSV2_SHIFT		16
-#define ID_PFR0_STATE3_SHIFT		12
-#define ID_PFR0_STATE2_SHIFT		8
-#define ID_PFR0_STATE1_SHIFT		4
-#define ID_PFR0_STATE0_SHIFT		0
-
-#define ID_DFR0_PERFMON_SHIFT		24
-#define ID_DFR0_MPROFDBG_SHIFT		20
-#define ID_DFR0_MMAPTRC_SHIFT		16
-#define ID_DFR0_COPTRC_SHIFT		12
-#define ID_DFR0_MMAPDBG_SHIFT		8
-#define ID_DFR0_COPSDBG_SHIFT		4
-#define ID_DFR0_COPDBG_SHIFT		0
-
-#define ID_PFR2_SSBS_SHIFT		4
-#define ID_PFR2_CSV3_SHIFT		0
-
-#define MVFR0_FPROUND_SHIFT		28
-#define MVFR0_FPSHVEC_SHIFT		24
-#define MVFR0_FPSQRT_SHIFT		20
-#define MVFR0_FPDIVIDE_SHIFT		16
-#define MVFR0_FPTRAP_SHIFT		12
-#define MVFR0_FPDP_SHIFT		8
-#define MVFR0_FPSP_SHIFT		4
-#define MVFR0_SIMD_SHIFT		0
-
-#define MVFR1_SIMDFMAC_SHIFT		28
-#define MVFR1_FPHP_SHIFT		24
-#define MVFR1_SIMDHP_SHIFT		20
-#define MVFR1_SIMDSP_SHIFT		16
-#define MVFR1_SIMDINT_SHIFT		12
-#define MVFR1_SIMDLS_SHIFT		8
-#define MVFR1_FPDNAN_SHIFT		4
-#define MVFR1_FPFTZ_SHIFT		0
-
-#define ID_PFR1_GIC_SHIFT		28
-#define ID_PFR1_VIRT_FRAC_SHIFT		24
-#define ID_PFR1_SEC_FRAC_SHIFT		20
-#define ID_PFR1_GENTIMER_SHIFT		16
-#define ID_PFR1_VIRTUALIZATION_SHIFT	12
-#define ID_PFR1_MPROGMOD_SHIFT		8
-#define ID_PFR1_SECURITY_SHIFT		4
-#define ID_PFR1_PROGMOD_SHIFT		0
-
 #if defined(CONFIG_ARM64_4K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_SHIFT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN
@@ -815,9 +688,6 @@
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN64_2_SHIFT
 #endif
 
-#define MVFR2_FPMISC_SHIFT		4
-#define MVFR2_SIMDMISC_SHIFT		0
-
 #define CPACR_EL1_FPEN_EL1EN	(BIT(20)) /* enable EL1 access */
 #define CPACR_EL1_FPEN_EL0EN	(BIT(21)) /* enable EL0 access, if EL1EN set */
 
@@ -851,10 +721,6 @@
 #define SYS_RGSR_EL1_SEED_SHIFT	8
 #define SYS_RGSR_EL1_SEED_MASK	0xffffUL
 
-/* GMID_EL1 field definitions */
-#define GMID_EL1_BS_SHIFT	0
-#define GMID_EL1_BS_SIZE	4
-
 /* TFSR{,E0}_EL1 bit definitions */
 #define SYS_TFSR_EL1_TF0_SHIFT	0
 #define SYS_TFSR_EL1_TF1_SHIFT	1
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 6e5826470bea..1f361e2da516 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -13,17 +13,16 @@
 
 struct pt_regs;
 
-struct undef_hook {
-	struct list_head node;
-	u32 instr_mask;
-	u32 instr_val;
-	u64 pstate_mask;
-	u64 pstate_val;
-	int (*fn)(struct pt_regs *regs, u32 instr);
-};
+#ifdef CONFIG_ARMV8_DEPRECATED
+bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn);
+#else
+static inline bool
+try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn)
+{
+	return false;
+}
+#endif /* CONFIG_ARMV8_DEPRECATED */
 
-void register_undef_hook(struct undef_hook *hook);
-void unregister_undef_hook(struct undef_hook *hook);
 void force_signal_inject(int signal, int code, unsigned long address, unsigned long err);
 void arm64_notify_segfault(unsigned long addr);
 void arm64_force_sig_fault(int signo, int code, unsigned long far, const char *str);
diff --git a/arch/arm64/include/asm/uprobes.h b/arch/arm64/include/asm/uprobes.h
index 315eef654e39..ba4bff5ca674 100644
--- a/arch/arm64/include/asm/uprobes.h
+++ b/arch/arm64/include/asm/uprobes.h
@@ -12,7 +12,7 @@
 
 #define MAX_UINSN_BYTES		AARCH64_INSN_SIZE
 
-#define UPROBE_SWBP_INSN	BRK64_OPCODE_UPROBES
+#define UPROBE_SWBP_INSN	cpu_to_le32(BRK64_OPCODE_UPROBES)
 #define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
 #define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
 
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 9b245da6f507..b713d30544f1 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -93,5 +93,8 @@
 #define HWCAP2_WFXT		(1UL << 31)
 #define HWCAP2_EBF16		(1UL << 32)
 #define HWCAP2_SVE_EBF16	(1UL << 33)
+#define HWCAP2_CSSC		(1UL << 34)
+#define HWCAP2_RPRFM		(1UL << 35)
+#define HWCAP2_SVE2P1		(1UL << 36)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 4aaf31e3bf16..9525041e4a14 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -62,6 +62,10 @@ struct sigcontext {
  * context. Such structures must be placed after the rt_sigframe on the stack
  * and be 16-byte aligned. The last structure must be a dummy one with the
  * magic and size set to 0.
+ *
+ * Note that the values allocated for use as magic should be chosen to
+ * be meaningful in ASCII to aid manual parsing, ZA doesn't follow this
+ * convention due to oversight but it should be observed for future additions.
  */
 struct _aarch64_ctx {
 	__u32 magic;
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 2f361a883d8c..8dd925f4a4c6 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -80,6 +80,8 @@ obj-$(CONFIG_ARM64_PTR_AUTH)		+= pointer_auth.o
 obj-$(CONFIG_ARM64_MTE)			+= mte.o
 obj-y					+= vdso-wrap.o
 obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
+obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.o
+CFLAGS_patch-scs.o			+= -mbranch-protection=none
 
 # Force dependency (vdso*-wrap.S includes vdso.so through incbin)
 $(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index a5a256e3f9fe..378453faa87e 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -13,6 +13,7 @@
 #define pr_fmt(fmt) "ACPI: " fmt
 
 #include <linux/acpi.h>
+#include <linux/arm-smccc.h>
 #include <linux/cpumask.h>
 #include <linux/efi.h>
 #include <linux/efi-bgrt.h>
@@ -411,3 +412,108 @@ void arch_reserve_mem_area(acpi_physical_address addr, size_t size)
 {
 	memblock_mark_nomap(addr, size);
 }
+
+#ifdef CONFIG_ACPI_FFH
+/*
+ * Implements ARM64 specific callbacks to support ACPI FFH Operation Region as
+ * specified in https://developer.arm.com/docs/den0048/latest
+ */
+struct acpi_ffh_data {
+	struct acpi_ffh_info info;
+	void (*invoke_ffh_fn)(unsigned long a0, unsigned long a1,
+			      unsigned long a2, unsigned long a3,
+			      unsigned long a4, unsigned long a5,
+			      unsigned long a6, unsigned long a7,
+			      struct arm_smccc_res *args,
+			      struct arm_smccc_quirk *res);
+	void (*invoke_ffh64_fn)(const struct arm_smccc_1_2_regs *args,
+				struct arm_smccc_1_2_regs *res);
+};
+
+int acpi_ffh_address_space_arch_setup(void *handler_ctxt, void **region_ctxt)
+{
+	enum arm_smccc_conduit conduit;
+	struct acpi_ffh_data *ffh_ctxt;
+
+	ffh_ctxt = kzalloc(sizeof(*ffh_ctxt), GFP_KERNEL);
+	if (!ffh_ctxt)
+		return -ENOMEM;
+
+	if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_2)
+		return -EOPNOTSUPP;
+
+	conduit = arm_smccc_1_1_get_conduit();
+	if (conduit == SMCCC_CONDUIT_NONE) {
+		pr_err("%s: invalid SMCCC conduit\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	if (conduit == SMCCC_CONDUIT_SMC) {
+		ffh_ctxt->invoke_ffh_fn = __arm_smccc_smc;
+		ffh_ctxt->invoke_ffh64_fn = arm_smccc_1_2_smc;
+	} else {
+		ffh_ctxt->invoke_ffh_fn = __arm_smccc_hvc;
+		ffh_ctxt->invoke_ffh64_fn = arm_smccc_1_2_hvc;
+	}
+
+	memcpy(ffh_ctxt, handler_ctxt, sizeof(ffh_ctxt->info));
+
+	*region_ctxt = ffh_ctxt;
+	return AE_OK;
+}
+
+static bool acpi_ffh_smccc_owner_allowed(u32 fid)
+{
+	int owner = ARM_SMCCC_OWNER_NUM(fid);
+
+	if (owner == ARM_SMCCC_OWNER_STANDARD ||
+	    owner == ARM_SMCCC_OWNER_SIP || owner == ARM_SMCCC_OWNER_OEM)
+		return true;
+
+	return false;
+}
+
+int acpi_ffh_address_space_arch_handler(acpi_integer *value, void *region_context)
+{
+	int ret = 0;
+	struct acpi_ffh_data *ffh_ctxt = region_context;
+
+	if (ffh_ctxt->info.offset == 0) {
+		/* SMC/HVC 32bit call */
+		struct arm_smccc_res res;
+		u32 a[8] = { 0 }, *ptr = (u32 *)value;
+
+		if (!ARM_SMCCC_IS_FAST_CALL(*ptr) || ARM_SMCCC_IS_64(*ptr) ||
+		    !acpi_ffh_smccc_owner_allowed(*ptr) ||
+		    ffh_ctxt->info.length > 32) {
+			ret = AE_ERROR;
+		} else {
+			int idx, len = ffh_ctxt->info.length >> 2;
+
+			for (idx = 0; idx < len; idx++)
+				a[idx] = *(ptr + idx);
+
+			ffh_ctxt->invoke_ffh_fn(a[0], a[1], a[2], a[3], a[4],
+						a[5], a[6], a[7], &res, NULL);
+			memcpy(value, &res, sizeof(res));
+		}
+
+	} else if (ffh_ctxt->info.offset == 1) {
+		/* SMC/HVC 64bit call */
+		struct arm_smccc_1_2_regs *r = (struct arm_smccc_1_2_regs *)value;
+
+		if (!ARM_SMCCC_IS_FAST_CALL(r->a0) || !ARM_SMCCC_IS_64(r->a0) ||
+		    !acpi_ffh_smccc_owner_allowed(r->a0) ||
+		    ffh_ctxt->info.length > sizeof(*r)) {
+			ret = AE_ERROR;
+		} else {
+			ffh_ctxt->invoke_ffh64_fn(r, r);
+			memcpy(value, r, ffh_ctxt->info.length);
+		}
+	} else {
+		ret = AE_ERROR;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_ACPI_FFH */
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index 91263d09ea65..d32d4ed5519b 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -196,7 +196,7 @@ static void __apply_alternatives(const struct alt_region *region,
 	}
 }
 
-void apply_alternatives_vdso(void)
+static void __init apply_alternatives_vdso(void)
 {
 	struct alt_region region;
 	const struct elf64_hdr *hdr;
@@ -220,7 +220,7 @@ void apply_alternatives_vdso(void)
 	__apply_alternatives(&region, false, &all_capabilities[0]);
 }
 
-static const struct alt_region kernel_alternatives = {
+static const struct alt_region kernel_alternatives __initconst = {
 	.begin	= (struct alt_instr *)__alt_instructions,
 	.end	= (struct alt_instr *)__alt_instructions_end,
 };
@@ -229,7 +229,7 @@ static const struct alt_region kernel_alternatives = {
  * We might be patching the stop_machine state machine, so implement a
  * really simple polling protocol here.
  */
-static int __apply_alternatives_multi_stop(void *unused)
+static int __init __apply_alternatives_multi_stop(void *unused)
 {
 	/* We always have a CPU 0 at this point (__init) */
 	if (smp_processor_id()) {
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index fb0e7c7b2e20..8a9052cf3013 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -17,7 +17,6 @@
 #include <asm/sysreg.h>
 #include <asm/system_misc.h>
 #include <asm/traps.h>
-#include <asm/kprobes.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace-events-emulation.h"
@@ -39,226 +38,46 @@ enum insn_emulation_mode {
 enum legacy_insn_status {
 	INSN_DEPRECATED,
 	INSN_OBSOLETE,
-};
-
-struct insn_emulation_ops {
-	const char		*name;
-	enum legacy_insn_status	status;
-	struct undef_hook	*hooks;
-	int			(*set_hw_mode)(bool enable);
+	INSN_UNAVAILABLE,
 };
 
 struct insn_emulation {
-	struct list_head node;
-	struct insn_emulation_ops *ops;
+	const char			*name;
+	enum legacy_insn_status		status;
+	bool				(*try_emulate)(struct pt_regs *regs,
+						       u32 insn);
+	int				(*set_hw_mode)(bool enable);
+
 	int current_mode;
 	int min;
 	int max;
-};
-
-static LIST_HEAD(insn_emulation);
-static int nr_insn_emulated __initdata;
-static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
-static DEFINE_MUTEX(insn_emulation_mutex);
-
-static void register_emulation_hooks(struct insn_emulation_ops *ops)
-{
-	struct undef_hook *hook;
-
-	BUG_ON(!ops->hooks);
-
-	for (hook = ops->hooks; hook->instr_mask; hook++)
-		register_undef_hook(hook);
-
-	pr_notice("Registered %s emulation handler\n", ops->name);
-}
-
-static void remove_emulation_hooks(struct insn_emulation_ops *ops)
-{
-	struct undef_hook *hook;
-
-	BUG_ON(!ops->hooks);
-
-	for (hook = ops->hooks; hook->instr_mask; hook++)
-		unregister_undef_hook(hook);
-
-	pr_notice("Removed %s emulation handler\n", ops->name);
-}
-
-static void enable_insn_hw_mode(void *data)
-{
-	struct insn_emulation *insn = (struct insn_emulation *)data;
-	if (insn->ops->set_hw_mode)
-		insn->ops->set_hw_mode(true);
-}
-
-static void disable_insn_hw_mode(void *data)
-{
-	struct insn_emulation *insn = (struct insn_emulation *)data;
-	if (insn->ops->set_hw_mode)
-		insn->ops->set_hw_mode(false);
-}
-
-/* Run set_hw_mode(mode) on all active CPUs */
-static int run_all_cpu_set_hw_mode(struct insn_emulation *insn, bool enable)
-{
-	if (!insn->ops->set_hw_mode)
-		return -EINVAL;
-	if (enable)
-		on_each_cpu(enable_insn_hw_mode, (void *)insn, true);
-	else
-		on_each_cpu(disable_insn_hw_mode, (void *)insn, true);
-	return 0;
-}
-
-/*
- * Run set_hw_mode for all insns on a starting CPU.
- * Returns:
- *  0 		- If all the hooks ran successfully.
- * -EINVAL	- At least one hook is not supported by the CPU.
- */
-static int run_all_insn_set_hw_mode(unsigned int cpu)
-{
-	int rc = 0;
-	unsigned long flags;
-	struct insn_emulation *insn;
-
-	raw_spin_lock_irqsave(&insn_emulation_lock, flags);
-	list_for_each_entry(insn, &insn_emulation, node) {
-		bool enable = (insn->current_mode == INSN_HW);
-		if (insn->ops->set_hw_mode && insn->ops->set_hw_mode(enable)) {
-			pr_warn("CPU[%u] cannot support the emulation of %s",
-				cpu, insn->ops->name);
-			rc = -EINVAL;
-		}
-	}
-	raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
-	return rc;
-}
-
-static int update_insn_emulation_mode(struct insn_emulation *insn,
-				       enum insn_emulation_mode prev)
-{
-	int ret = 0;
-
-	switch (prev) {
-	case INSN_UNDEF: /* Nothing to be done */
-		break;
-	case INSN_EMULATE:
-		remove_emulation_hooks(insn->ops);
-		break;
-	case INSN_HW:
-		if (!run_all_cpu_set_hw_mode(insn, false))
-			pr_notice("Disabled %s support\n", insn->ops->name);
-		break;
-	}
-
-	switch (insn->current_mode) {
-	case INSN_UNDEF:
-		break;
-	case INSN_EMULATE:
-		register_emulation_hooks(insn->ops);
-		break;
-	case INSN_HW:
-		ret = run_all_cpu_set_hw_mode(insn, true);
-		if (!ret)
-			pr_notice("Enabled %s support\n", insn->ops->name);
-		break;
-	}
 
-	return ret;
-}
-
-static void __init register_insn_emulation(struct insn_emulation_ops *ops)
-{
-	unsigned long flags;
-	struct insn_emulation *insn;
-
-	insn = kzalloc(sizeof(*insn), GFP_KERNEL);
-	if (!insn)
-		return;
-
-	insn->ops = ops;
-	insn->min = INSN_UNDEF;
-
-	switch (ops->status) {
-	case INSN_DEPRECATED:
-		insn->current_mode = INSN_EMULATE;
-		/* Disable the HW mode if it was turned on at early boot time */
-		run_all_cpu_set_hw_mode(insn, false);
-		insn->max = INSN_HW;
-		break;
-	case INSN_OBSOLETE:
-		insn->current_mode = INSN_UNDEF;
-		insn->max = INSN_EMULATE;
-		break;
-	}
-
-	raw_spin_lock_irqsave(&insn_emulation_lock, flags);
-	list_add(&insn->node, &insn_emulation);
-	nr_insn_emulated++;
-	raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
-
-	/* Register any handlers if required */
-	update_insn_emulation_mode(insn, INSN_UNDEF);
-}
-
-static int emulation_proc_handler(struct ctl_table *table, int write,
-				  void *buffer, size_t *lenp,
-				  loff_t *ppos)
-{
-	int ret = 0;
-	struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
-	enum insn_emulation_mode prev_mode = insn->current_mode;
-
-	mutex_lock(&insn_emulation_mutex);
-	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+	/*
+	 * sysctl for this emulation + a sentinal entry.
+	 */
+	struct ctl_table sysctl[2];
+};
 
-	if (ret || !write || prev_mode == insn->current_mode)
-		goto ret;
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
 
-	ret = update_insn_emulation_mode(insn, prev_mode);
-	if (ret) {
-		/* Mode change failed, revert to previous mode. */
-		insn->current_mode = prev_mode;
-		update_insn_emulation_mode(insn, INSN_UNDEF);
-	}
-ret:
-	mutex_unlock(&insn_emulation_mutex);
-	return ret;
-}
+#define	ARM_OPCODE_CONDITION_UNCOND	0xf
 
-static void __init register_insn_emulation_sysctl(void)
+static unsigned int __maybe_unused aarch32_check_condition(u32 opcode, u32 psr)
 {
-	unsigned long flags;
-	int i = 0;
-	struct insn_emulation *insn;
-	struct ctl_table *insns_sysctl, *sysctl;
-
-	insns_sysctl = kcalloc(nr_insn_emulated + 1, sizeof(*sysctl),
-			       GFP_KERNEL);
-	if (!insns_sysctl)
-		return;
-
-	raw_spin_lock_irqsave(&insn_emulation_lock, flags);
-	list_for_each_entry(insn, &insn_emulation, node) {
-		sysctl = &insns_sysctl[i];
-
-		sysctl->mode = 0644;
-		sysctl->maxlen = sizeof(int);
+	u32 cc_bits  = opcode >> 28;
 
-		sysctl->procname = insn->ops->name;
-		sysctl->data = &insn->current_mode;
-		sysctl->extra1 = &insn->min;
-		sysctl->extra2 = &insn->max;
-		sysctl->proc_handler = emulation_proc_handler;
-		i++;
+	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+		if ((*aarch32_opcode_cond_checks[cc_bits])(psr))
+			return ARM_OPCODE_CONDTEST_PASS;
+		else
+			return ARM_OPCODE_CONDTEST_FAIL;
 	}
-	raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
-
-	register_sysctl("abi", insns_sysctl);
+	return ARM_OPCODE_CONDTEST_UNCOND;
 }
 
+#ifdef CONFIG_SWP_EMULATION
 /*
  *  Implement emulation of the SWP/SWPB instructions using load-exclusive and
  *  store-exclusive.
@@ -339,25 +158,6 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 	return res;
 }
 
-#define ARM_OPCODE_CONDTEST_FAIL   0
-#define ARM_OPCODE_CONDTEST_PASS   1
-#define ARM_OPCODE_CONDTEST_UNCOND 2
-
-#define	ARM_OPCODE_CONDITION_UNCOND	0xf
-
-static unsigned int __kprobes aarch32_check_condition(u32 opcode, u32 psr)
-{
-	u32 cc_bits  = opcode >> 28;
-
-	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
-		if ((*aarch32_opcode_cond_checks[cc_bits])(psr))
-			return ARM_OPCODE_CONDTEST_PASS;
-		else
-			return ARM_OPCODE_CONDTEST_FAIL;
-	}
-	return ARM_OPCODE_CONDTEST_UNCOND;
-}
-
 /*
  * swp_handler logs the id of calling process, dissects the instruction, sanity
  * checks the memory location, calls emulate_swpX for the actual operation and
@@ -430,28 +230,27 @@ fault:
 	return 0;
 }
 
-/*
- * Only emulate SWP/SWPB executed in ARM state/User mode.
- * The kernel must be SWP free and SWP{B} does not exist in Thumb.
- */
-static struct undef_hook swp_hooks[] = {
-	{
-		.instr_mask	= 0x0fb00ff0,
-		.instr_val	= 0x01000090,
-		.pstate_mask	= PSR_AA32_MODE_MASK,
-		.pstate_val	= PSR_AA32_MODE_USR,
-		.fn		= swp_handler
-	},
-	{ }
-};
+static bool try_emulate_swp(struct pt_regs *regs, u32 insn)
+{
+	/* SWP{B} only exists in ARM state and does not exist in Thumb */
+	if (!compat_user_mode(regs) || compat_thumb_mode(regs))
+		return false;
 
-static struct insn_emulation_ops swp_ops = {
+	if ((insn & 0x0fb00ff0) != 0x01000090)
+		return false;
+
+	return swp_handler(regs, insn) == 0;
+}
+
+static struct insn_emulation insn_swp = {
 	.name = "swp",
 	.status = INSN_OBSOLETE,
-	.hooks = swp_hooks,
+	.try_emulate = try_emulate_swp,
 	.set_hw_mode = NULL,
 };
+#endif /* CONFIG_SWP_EMULATION */
 
+#ifdef CONFIG_CP15_BARRIER_EMULATION
 static int cp15barrier_handler(struct pt_regs *regs, u32 instr)
 {
 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
@@ -514,31 +313,29 @@ static int cp15_barrier_set_hw_mode(bool enable)
 	return 0;
 }
 
-static struct undef_hook cp15_barrier_hooks[] = {
-	{
-		.instr_mask	= 0x0fff0fdf,
-		.instr_val	= 0x0e070f9a,
-		.pstate_mask	= PSR_AA32_MODE_MASK,
-		.pstate_val	= PSR_AA32_MODE_USR,
-		.fn		= cp15barrier_handler,
-	},
-	{
-		.instr_mask	= 0x0fff0fff,
-		.instr_val	= 0x0e070f95,
-		.pstate_mask	= PSR_AA32_MODE_MASK,
-		.pstate_val	= PSR_AA32_MODE_USR,
-		.fn		= cp15barrier_handler,
-	},
-	{ }
-};
+static bool try_emulate_cp15_barrier(struct pt_regs *regs, u32 insn)
+{
+	if (!compat_user_mode(regs) || compat_thumb_mode(regs))
+		return false;
+
+	if ((insn & 0x0fff0fdf) == 0x0e070f9a)
+		return cp15barrier_handler(regs, insn) == 0;
+
+	if ((insn & 0x0fff0fff) == 0x0e070f95)
+		return cp15barrier_handler(regs, insn) == 0;
 
-static struct insn_emulation_ops cp15_barrier_ops = {
+	return false;
+}
+
+static struct insn_emulation insn_cp15_barrier = {
 	.name = "cp15_barrier",
 	.status = INSN_DEPRECATED,
-	.hooks = cp15_barrier_hooks,
+	.try_emulate = try_emulate_cp15_barrier,
 	.set_hw_mode = cp15_barrier_set_hw_mode,
 };
+#endif /* CONFIG_CP15_BARRIER_EMULATION */
 
+#ifdef CONFIG_SETEND_EMULATION
 static int setend_set_hw_mode(bool enable)
 {
 	if (!cpu_supports_mixed_endian_el0())
@@ -586,31 +383,218 @@ static int t16_setend_handler(struct pt_regs *regs, u32 instr)
 	return rc;
 }
 
-static struct undef_hook setend_hooks[] = {
-	{
-		.instr_mask	= 0xfffffdff,
-		.instr_val	= 0xf1010000,
-		.pstate_mask	= PSR_AA32_MODE_MASK,
-		.pstate_val	= PSR_AA32_MODE_USR,
-		.fn		= a32_setend_handler,
-	},
-	{
-		/* Thumb mode */
-		.instr_mask	= 0xfffffff7,
-		.instr_val	= 0x0000b650,
-		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
-		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
-		.fn		= t16_setend_handler,
-	},
-	{}
-};
+static bool try_emulate_setend(struct pt_regs *regs, u32 insn)
+{
+	if (compat_thumb_mode(regs) &&
+	    (insn & 0xfffffff7) == 0x0000b650)
+		return t16_setend_handler(regs, insn) == 0;
+
+	if (compat_user_mode(regs) &&
+	    (insn & 0xfffffdff) == 0xf1010000)
+		return a32_setend_handler(regs, insn) == 0;
 
-static struct insn_emulation_ops setend_ops = {
+	return false;
+}
+
+static struct insn_emulation insn_setend = {
 	.name = "setend",
 	.status = INSN_DEPRECATED,
-	.hooks = setend_hooks,
+	.try_emulate = try_emulate_setend,
 	.set_hw_mode = setend_set_hw_mode,
 };
+#endif /* CONFIG_SETEND_EMULATION */
+
+static struct insn_emulation *insn_emulations[] = {
+#ifdef CONFIG_SWP_EMULATION
+	&insn_swp,
+#endif
+#ifdef CONFIG_CP15_BARRIER_EMULATION
+	&insn_cp15_barrier,
+#endif
+#ifdef CONFIG_SETEND_EMULATION
+	&insn_setend,
+#endif
+};
+
+static DEFINE_MUTEX(insn_emulation_mutex);
+
+static void enable_insn_hw_mode(void *data)
+{
+	struct insn_emulation *insn = (struct insn_emulation *)data;
+	if (insn->set_hw_mode)
+		insn->set_hw_mode(true);
+}
+
+static void disable_insn_hw_mode(void *data)
+{
+	struct insn_emulation *insn = (struct insn_emulation *)data;
+	if (insn->set_hw_mode)
+		insn->set_hw_mode(false);
+}
+
+/* Run set_hw_mode(mode) on all active CPUs */
+static int run_all_cpu_set_hw_mode(struct insn_emulation *insn, bool enable)
+{
+	if (!insn->set_hw_mode)
+		return -EINVAL;
+	if (enable)
+		on_each_cpu(enable_insn_hw_mode, (void *)insn, true);
+	else
+		on_each_cpu(disable_insn_hw_mode, (void *)insn, true);
+	return 0;
+}
+
+/*
+ * Run set_hw_mode for all insns on a starting CPU.
+ * Returns:
+ *  0 		- If all the hooks ran successfully.
+ * -EINVAL	- At least one hook is not supported by the CPU.
+ */
+static int run_all_insn_set_hw_mode(unsigned int cpu)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	/*
+	 * Disable IRQs to serialize against an IPI from
+	 * run_all_cpu_set_hw_mode(), ensuring the HW is programmed to the most
+	 * recent enablement state if the two race with one another.
+	 */
+	local_irq_save(flags);
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *insn = insn_emulations[i];
+		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
+			pr_warn("CPU[%u] cannot support the emulation of %s",
+				cpu, insn->name);
+			rc = -EINVAL;
+		}
+	}
+	local_irq_restore(flags);
+
+	return rc;
+}
+
+static int update_insn_emulation_mode(struct insn_emulation *insn,
+				       enum insn_emulation_mode prev)
+{
+	int ret = 0;
+
+	switch (prev) {
+	case INSN_UNDEF: /* Nothing to be done */
+		break;
+	case INSN_EMULATE:
+		break;
+	case INSN_HW:
+		if (!run_all_cpu_set_hw_mode(insn, false))
+			pr_notice("Disabled %s support\n", insn->name);
+		break;
+	}
+
+	switch (insn->current_mode) {
+	case INSN_UNDEF:
+		break;
+	case INSN_EMULATE:
+		break;
+	case INSN_HW:
+		ret = run_all_cpu_set_hw_mode(insn, true);
+		if (!ret)
+			pr_notice("Enabled %s support\n", insn->name);
+		break;
+	}
+
+	return ret;
+}
+
+static int emulation_proc_handler(struct ctl_table *table, int write,
+				  void *buffer, size_t *lenp,
+				  loff_t *ppos)
+{
+	int ret = 0;
+	struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
+	enum insn_emulation_mode prev_mode = insn->current_mode;
+
+	mutex_lock(&insn_emulation_mutex);
+	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+
+	if (ret || !write || prev_mode == insn->current_mode)
+		goto ret;
+
+	ret = update_insn_emulation_mode(insn, prev_mode);
+	if (ret) {
+		/* Mode change failed, revert to previous mode. */
+		WRITE_ONCE(insn->current_mode, prev_mode);
+		update_insn_emulation_mode(insn, INSN_UNDEF);
+	}
+ret:
+	mutex_unlock(&insn_emulation_mutex);
+	return ret;
+}
+
+static void __init register_insn_emulation(struct insn_emulation *insn)
+{
+	struct ctl_table *sysctl;
+
+	insn->min = INSN_UNDEF;
+
+	switch (insn->status) {
+	case INSN_DEPRECATED:
+		insn->current_mode = INSN_EMULATE;
+		/* Disable the HW mode if it was turned on at early boot time */
+		run_all_cpu_set_hw_mode(insn, false);
+		insn->max = INSN_HW;
+		break;
+	case INSN_OBSOLETE:
+		insn->current_mode = INSN_UNDEF;
+		insn->max = INSN_EMULATE;
+		break;
+	case INSN_UNAVAILABLE:
+		insn->current_mode = INSN_UNDEF;
+		insn->max = INSN_UNDEF;
+		break;
+	}
+
+	/* Program the HW if required */
+	update_insn_emulation_mode(insn, INSN_UNDEF);
+
+	if (insn->status != INSN_UNAVAILABLE) {
+		sysctl = &insn->sysctl[0];
+
+		sysctl->mode = 0644;
+		sysctl->maxlen = sizeof(int);
+
+		sysctl->procname = insn->name;
+		sysctl->data = &insn->current_mode;
+		sysctl->extra1 = &insn->min;
+		sysctl->extra2 = &insn->max;
+		sysctl->proc_handler = emulation_proc_handler;
+
+		register_sysctl("abi", sysctl);
+	}
+}
+
+bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn)
+{
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *ie = insn_emulations[i];
+
+		if (ie->status == INSN_UNAVAILABLE)
+			continue;
+
+		/*
+		 * A trap may race with the mode being changed
+		 * INSN_EMULATE<->INSN_HW. Try to emulate the instruction to
+		 * avoid a spurious UNDEF.
+		 */
+		if (READ_ONCE(ie->current_mode) == INSN_UNDEF)
+			continue;
+
+		if (ie->try_emulate(regs, insn))
+			return true;
+	}
+
+	return false;
+}
 
 /*
  * Invoked as core_initcall, which guarantees that the instruction
@@ -618,24 +602,25 @@ static struct insn_emulation_ops setend_ops = {
  */
 static int __init armv8_deprecated_init(void)
 {
-	if (IS_ENABLED(CONFIG_SWP_EMULATION))
-		register_insn_emulation(&swp_ops);
+#ifdef CONFIG_SETEND_EMULATION
+	if (!system_supports_mixed_endian_el0()) {
+		insn_setend.status = INSN_UNAVAILABLE;
+		pr_info("setend instruction emulation is not supported on this system\n");
+	}
 
-	if (IS_ENABLED(CONFIG_CP15_BARRIER_EMULATION))
-		register_insn_emulation(&cp15_barrier_ops);
+#endif
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *ie = insn_emulations[i];
 
-	if (IS_ENABLED(CONFIG_SETEND_EMULATION)) {
-		if (system_supports_mixed_endian_el0())
-			register_insn_emulation(&setend_ops);
-		else
-			pr_info("setend instruction emulation is not supported on this system\n");
+		if (ie->status == INSN_UNAVAILABLE)
+			continue;
+
+		register_insn_emulation(ie);
 	}
 
 	cpuhp_setup_state_nocalls(CPUHP_AP_ARM64_ISNDEP_STARTING,
 				  "arm64/isndep:starting",
 				  run_all_insn_set_hw_mode, NULL);
-	register_insn_emulation_sysctl();
-
 	return 0;
 }
 
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 1197e7679882..2234624536d9 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -82,6 +82,19 @@ int main(void)
   DEFINE(S_STACKFRAME,		offsetof(struct pt_regs, stackframe));
   DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
   BLANK();
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+  DEFINE(FREGS_X0,		offsetof(struct ftrace_regs, regs[0]));
+  DEFINE(FREGS_X2,		offsetof(struct ftrace_regs, regs[2]));
+  DEFINE(FREGS_X4,		offsetof(struct ftrace_regs, regs[4]));
+  DEFINE(FREGS_X6,		offsetof(struct ftrace_regs, regs[6]));
+  DEFINE(FREGS_X8,		offsetof(struct ftrace_regs, regs[8]));
+  DEFINE(FREGS_FP,		offsetof(struct ftrace_regs, fp));
+  DEFINE(FREGS_LR,		offsetof(struct ftrace_regs, lr));
+  DEFINE(FREGS_SP,		offsetof(struct ftrace_regs, sp));
+  DEFINE(FREGS_PC,		offsetof(struct ftrace_regs, pc));
+  DEFINE(FREGS_SIZE,		sizeof(struct ftrace_regs));
+  BLANK();
+#endif
 #ifdef CONFIG_COMPAT
   DEFINE(COMPAT_SIGFRAME_REGS_OFFSET,		offsetof(struct compat_sigframe, uc.uc_mcontext.arm_r0));
   DEFINE(COMPAT_RT_SIGFRAME_REGS_OFFSET,	offsetof(struct compat_rt_sigframe, sig.uc.uc_mcontext.arm_r0));
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 89ac00084f38..307faa2b4395 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -661,6 +661,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_2645198
+	{
+		.desc = "ARM erratum 2645198",
+		.capability = ARM64_WORKAROUND_2645198,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A715)
+	},
+#endif
 #ifdef CONFIG_ARM64_ERRATUM_2077057
 	{
 		.desc = "ARM erratum 2077057",
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index b3f37e2209ad..7e76e1fda2a1 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -212,6 +212,8 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_CSSC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_RPRFM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_EL1_BC_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
 		       FTR_STRICT, FTR_EXACT, ID_AA64ISAR2_EL1_APA3_SHIFT, 4, 0),
@@ -402,14 +404,14 @@ struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = {
 };
 
 static const struct arm64_ftr_bits ftr_id_mmfr0[] = {
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_INNERSHR_SHIFT, 4, 0xf),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_FCSE_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_MMFR0_AUXREG_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_TCM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_SHARELVL_SHIFT, 4, 0),
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_OUTERSHR_SHIFT, 4, 0xf),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_PMSA_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_VMSA_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_InnerShr_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_FCSE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_AuxReg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_TCM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_ShareLvl_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_OuterShr_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_PMSA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_VMSA_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -429,32 +431,32 @@ static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_mvfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPROUND_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSHVEC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSQRT_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDIVIDE_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPTRAP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_SIMD_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPRound_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPShVec_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPSqrt_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPDivide_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPTrap_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPDP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_SIMDReg_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_mvfr1[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDFMAC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPHP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDHP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDSP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDINT_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDLS_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPDNAN_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPFTZ_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDFMAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDInt_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDLS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPDNaN_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPFtZ_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_mvfr2[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_FPMISC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_SIMDMISC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_EL1_FPMisc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_EL1_SIMDMisc_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -470,34 +472,34 @@ static const struct arm64_ftr_bits ftr_gmid[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_isar0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_DIVIDE_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_DEBUG_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_COPROC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_CMPBRANCH_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_BITFIELD_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_BITCOUNT_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_SWAP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Divide_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Debug_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Coproc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_CmpBranch_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_BitField_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_BitCount_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Swap_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_isar5[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_RDM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_CRC32_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA1_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_AES_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SEVL_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_RDM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_CRC32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SHA2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SHA1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SEVL_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EVT_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_CCIDX_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_LSM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_HPDS_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_CNP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_XNX_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_AC2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_EVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_CCIDX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_LSM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_HPDS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_CnP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_XNX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_AC2_SHIFT, 4, 0),
 
 	/*
 	 * SpecSEI = 1 indicates that the PE might generate an SError on an
@@ -505,80 +507,80 @@ static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
 	 * SError might be generated than it will not be. Hence it has been
 	 * classified as FTR_HIGHER_SAFE.
 	 */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_MMFR4_SPECSEI_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_MMFR4_EL1_SpecSEI_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_isar4[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SWP_FRAC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_PSR_M_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SYNCH_PRIM_FRAC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_BARRIER_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_SMC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_WRITEBACK_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_WITHSHIFTS_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_UNPRIV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SWP_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_PSR_M_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SynchPrim_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Barrier_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SMC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Writeback_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_WithShifts_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Unpriv_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_mmfr5[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR5_ETS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR5_EL1_ETS_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_isar6[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_I8MM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_BF16_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_SPECRES_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_SB_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_FHM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_DP_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_JSCVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_I8MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_BF16_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SPECRES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_FHM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_DP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_JSCVT_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_pfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_DIT_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR0_CSV2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE1_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE0_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_DIT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_CSV2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State0_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_pfr1[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_GIC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_VIRT_FRAC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_SEC_FRAC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_GENTIMER_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_VIRTUALIZATION_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_MPROGMOD_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_SECURITY_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_PROGMOD_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_GIC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Virt_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Sec_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_GenTimer_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Virtualization_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_MProgMod_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Security_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_ProgMod_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_pfr2[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_SSBS_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_CSV3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_SSBS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_CSV3_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
 	/* [31:28] TraceFilt */
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_PERFMON_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MPROFDBG_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPTRC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPTRC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPDBG_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPSDBG_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPDBG_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_EL1_PerfMon_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MProfDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MMapTrc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopTrc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MMapDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopSDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopDbg_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_dfr1[] = {
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR1_MTPMU_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR1_EL1_MTPMU_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -1119,12 +1121,12 @@ static int update_32bit_cpu_features(int cpu, struct cpuinfo_32bit *info,
 	 * EL1-dependent register fields to avoid spurious sanity check fails.
 	 */
 	if (!id_aa64pfr0_32bit_el1(pfr0)) {
-		relax_cpu_ftr_reg(SYS_ID_ISAR4_EL1, ID_ISAR4_SMC_SHIFT);
-		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_VIRT_FRAC_SHIFT);
-		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_SEC_FRAC_SHIFT);
-		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_VIRTUALIZATION_SHIFT);
-		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_SECURITY_SHIFT);
-		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_PROGMOD_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_ISAR4_EL1, ID_ISAR4_EL1_SMC_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Virt_frac_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Sec_frac_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Virtualization_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Security_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_ProgMod_SHIFT);
 	}
 
 	taint |= check_update_ftr_reg(SYS_ID_DFR0_EL1, cpu,
@@ -2101,6 +2103,11 @@ static void cpu_trap_el0_impdef(const struct arm64_cpu_capabilities *__unused)
 	sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_TIDCP);
 }
 
+static void cpu_enable_dit(const struct arm64_cpu_capabilities *__unused)
+{
+	set_pstate_dit(1);
+}
+
 /* Internal helper functions to match cpu capability type */
 static bool
 cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap)
@@ -2664,6 +2671,18 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.cpu_enable = cpu_trap_el0_impdef,
 	},
+	{
+		.desc = "Data independent timing control (DIT)",
+		.capability = ARM64_HAS_DIT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.sys_reg = SYS_ID_AA64PFR0_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64PFR0_EL1_DIT_SHIFT,
+		.field_width = 4,
+		.min_field_value = ID_AA64PFR0_EL1_DIT_IMP,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_dit,
+	},
 	{},
 };
 
@@ -2772,6 +2791,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_EL1_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT),
 #ifdef CONFIG_ARM64_SVE
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_EL1_SVE_IMP, CAP_HWCAP, KERNEL_HWCAP_SVE),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
 	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
 	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
 	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
@@ -2798,6 +2818,8 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 #endif /* CONFIG_ARM64_MTE */
 	HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_EL1_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV),
 	HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_EL1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP),
+	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_CSSC_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_CSSC_IMP, CAP_HWCAP, KERNEL_HWCAP_CSSC),
+	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRFM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_RPRFM_IMP, CAP_HWCAP, KERNEL_HWCAP_RPRFM),
 	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES),
 	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_WFxT_IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT),
 #ifdef CONFIG_ARM64_SME
@@ -2829,24 +2851,24 @@ static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope)
 	else
 		mvfr1 = read_sysreg_s(SYS_MVFR1_EL1);
 
-	return cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDSP_SHIFT) &&
-		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDINT_SHIFT) &&
-		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDLS_SHIFT);
+	return cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDSP_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDInt_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDLS_SHIFT);
 }
 #endif
 
 static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = {
 #ifdef CONFIG_COMPAT
 	HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON),
-	HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_SIMDFMAC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
+	HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_EL1_SIMDFMAC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
 	/* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */
-	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
-	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_EL1_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_EL1_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
 #endif
 	{},
 };
@@ -3435,35 +3457,22 @@ int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt)
 	return rc;
 }
 
-static int emulate_mrs(struct pt_regs *regs, u32 insn)
+bool try_emulate_mrs(struct pt_regs *regs, u32 insn)
 {
 	u32 sys_reg, rt;
 
+	if (compat_user_mode(regs) || !aarch64_insn_is_mrs(insn))
+		return false;
+
 	/*
 	 * sys_reg values are defined as used in mrs/msr instruction.
 	 * shift the imm value to get the encoding.
 	 */
 	sys_reg = (u32)aarch64_insn_decode_immediate(AARCH64_INSN_IMM_16, insn) << 5;
 	rt = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RT, insn);
-	return do_emulate_mrs(regs, sys_reg, rt);
+	return do_emulate_mrs(regs, sys_reg, rt) == 0;
 }
 
-static struct undef_hook mrs_hook = {
-	.instr_mask = 0xffff0000,
-	.instr_val  = 0xd5380000,
-	.pstate_mask = PSR_AA32_MODE_MASK,
-	.pstate_val = PSR_MODE_EL0t,
-	.fn = emulate_mrs,
-};
-
-static int __init enable_mrs_emulation(void)
-{
-	register_undef_hook(&mrs_hook);
-	return 0;
-}
-
-core_initcall(enable_mrs_emulation);
-
 enum mitigation_state arm64_get_meltdown_state(void)
 {
 	if (__meltdown_safe)
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 28d4f442b0bc..379695262b77 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -116,6 +116,9 @@ static const char *const hwcap_str[] = {
 	[KERNEL_HWCAP_WFXT]		= "wfxt",
 	[KERNEL_HWCAP_EBF16]		= "ebf16",
 	[KERNEL_HWCAP_SVE_EBF16]	= "sveebf16",
+	[KERNEL_HWCAP_CSSC]		= "cssc",
+	[KERNEL_HWCAP_RPRFM]		= "rprfm",
+	[KERNEL_HWCAP_SVE2P1]		= "sve2p1",
 };
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/arm64/kernel/efi-rt-wrapper.S b/arch/arm64/kernel/efi-rt-wrapper.S
index 67babd5f04c2..75691a2641c1 100644
--- a/arch/arm64/kernel/efi-rt-wrapper.S
+++ b/arch/arm64/kernel/efi-rt-wrapper.S
@@ -6,7 +6,7 @@
 #include <linux/linkage.h>
 
 SYM_FUNC_START(__efi_rt_asm_wrapper)
-	stp	x29, x30, [sp, #-112]!
+	stp	x29, x30, [sp, #-32]!
 	mov	x29, sp
 
 	/*
@@ -17,20 +17,6 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	stp	x1, x18, [sp, #16]
 
 	/*
-	 * Preserve all callee saved registers and record the stack pointer
-	 * value in a per-CPU variable so we can recover from synchronous
-	 * exceptions occurring while running the firmware routines.
-	 */
-	stp	x19, x20, [sp, #32]
-	stp	x21, x22, [sp, #48]
-	stp	x23, x24, [sp, #64]
-	stp	x25, x26, [sp, #80]
-	stp	x27, x28, [sp, #96]
-
-	adr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
-	str		x29, [x8]
-
-	/*
 	 * We are lucky enough that no EFI runtime services take more than
 	 * 5 arguments, so all are passed in registers rather than via the
 	 * stack.
@@ -45,7 +31,7 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 
 	ldp	x1, x2, [sp, #16]
 	cmp	x2, x18
-	ldp	x29, x30, [sp], #112
+	ldp	x29, x30, [sp], #32
 	b.ne	0f
 	ret
 0:
@@ -59,18 +45,3 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	mov	x18, x2
 	b	efi_handle_corrupted_x18	// tail call
 SYM_FUNC_END(__efi_rt_asm_wrapper)
-
-SYM_FUNC_START(__efi_rt_asm_recover)
-	ldr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
-	mov		sp, x8
-
-	ldp	x0,  x18, [sp, #16]
-	ldp	x19, x20, [sp, #32]
-	ldp	x21, x22, [sp, #48]
-	ldp	x23, x24, [sp, #64]
-	ldp	x25, x26, [sp, #80]
-	ldp	x27, x28, [sp, #96]
-	ldp	x29, x30, [sp], #112
-
-	b	efi_handle_runtime_exception
-SYM_FUNC_END(__efi_rt_asm_recover)
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index ee53f2a0aa03..a908a37f0367 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -9,7 +9,6 @@
 
 #include <linux/efi.h>
 #include <linux/init.h>
-#include <linux/percpu.h>
 
 #include <asm/efi.h>
 
@@ -145,28 +144,3 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
 	return s;
 }
-
-asmlinkage DEFINE_PER_CPU(u64, __efi_rt_asm_recover_sp);
-
-asmlinkage efi_status_t __efi_rt_asm_recover(void);
-
-asmlinkage efi_status_t efi_handle_runtime_exception(const char *f)
-{
-	pr_err(FW_BUG "Synchronous exception occurred in EFI runtime service %s()\n", f);
-	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-	return EFI_ABORTED;
-}
-
-bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
-{
-	 /* Check whether the exception occurred while running the firmware */
-	if (current_work() != &efi_rts_work.work || regs->pc >= TASK_SIZE_64)
-		return false;
-
-	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
-	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
-	dump_stack();
-
-	regs->pc = (u64)__efi_rt_asm_recover;
-	return true;
-}
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 27369fa1c032..cce1167199e3 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -30,7 +30,7 @@
 /*
  * Handle IRQ/context state management when entering from kernel mode.
  * Before this function is called it is not safe to call regular kernel code,
- * intrumentable code, or any code which may trigger an exception.
+ * instrumentable code, or any code which may trigger an exception.
  *
  * This is intended to match the logic in irqentry_enter(), handling the kernel
  * mode transitions only.
@@ -63,7 +63,7 @@ static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when exiting to kernel mode.
  * After this function returns it is not safe to call regular kernel code,
- * intrumentable code, or any code which may trigger an exception.
+ * instrumentable code, or any code which may trigger an exception.
  *
  * This is intended to match the logic in irqentry_exit(), handling the kernel
  * mode transitions only, and with preemption handled elsewhere.
@@ -97,7 +97,7 @@ static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when entering from user mode.
  * Before this function is called it is not safe to call regular kernel code,
- * intrumentable code, or any code which may trigger an exception.
+ * instrumentable code, or any code which may trigger an exception.
  */
 static __always_inline void __enter_from_user_mode(void)
 {
@@ -116,7 +116,7 @@ static __always_inline void enter_from_user_mode(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when exiting to user mode.
  * After this function returns it is not safe to call regular kernel code,
- * intrumentable code, or any code which may trigger an exception.
+ * instrumentable code, or any code which may trigger an exception.
  */
 static __always_inline void __exit_to_user_mode(void)
 {
@@ -152,7 +152,7 @@ asmlinkage void noinstr asm_exit_to_user_mode(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when entering an NMI from user/kernel
  * mode. Before this function is called it is not safe to call regular kernel
- * code, intrumentable code, or any code which may trigger an exception.
+ * code, instrumentable code, or any code which may trigger an exception.
  */
 static void noinstr arm64_enter_nmi(struct pt_regs *regs)
 {
@@ -170,7 +170,7 @@ static void noinstr arm64_enter_nmi(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when exiting an NMI from user/kernel
  * mode. After this function returns it is not safe to call regular kernel
- * code, intrumentable code, or any code which may trigger an exception.
+ * code, instrumentable code, or any code which may trigger an exception.
  */
 static void noinstr arm64_exit_nmi(struct pt_regs *regs)
 {
@@ -192,7 +192,7 @@ static void noinstr arm64_exit_nmi(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when entering a debug exception from
  * kernel mode. Before this function is called it is not safe to call regular
- * kernel code, intrumentable code, or any code which may trigger an exception.
+ * kernel code, instrumentable code, or any code which may trigger an exception.
  */
 static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
 {
@@ -207,7 +207,7 @@ static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
 /*
  * Handle IRQ/context state management when exiting a debug exception from
  * kernel mode. After this function returns it is not safe to call regular
- * kernel code, intrumentable code, or any code which may trigger an exception.
+ * kernel code, instrumentable code, or any code which may trigger an exception.
  */
 static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
 {
@@ -384,7 +384,7 @@ static void noinstr el1_undef(struct pt_regs *regs, unsigned long esr)
 {
 	enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
-	do_undefinstr(regs, esr);
+	do_el1_undef(regs, esr);
 	local_daif_mask();
 	exit_to_kernel_mode(regs);
 }
@@ -570,7 +570,7 @@ static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr)
 {
 	enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	do_sysinstr(esr, regs);
+	do_el0_sys(esr, regs);
 	exit_to_user_mode(regs);
 }
 
@@ -599,7 +599,7 @@ static void noinstr el0_undef(struct pt_regs *regs, unsigned long esr)
 {
 	enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	do_undefinstr(regs, esr);
+	do_el0_undef(regs, esr);
 	exit_to_user_mode(regs);
 }
 
@@ -762,7 +762,7 @@ static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
 {
 	enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	do_cp15instr(esr, regs);
+	do_el0_cp15(esr, regs);
 	exit_to_user_mode(regs);
 }
 
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index 795344ab4ec4..3b625f76ffba 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -13,83 +13,58 @@
 #include <asm/ftrace.h>
 #include <asm/insn.h>
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 /*
  * Due to -fpatchable-function-entry=2, the compiler has placed two NOPs before
  * the regular function prologue. For an enabled callsite, ftrace_init_nop() and
  * ftrace_make_call() have patched those NOPs to:
  *
  * 	MOV	X9, LR
- * 	BL	<entry>
- *
- * ... where <entry> is either ftrace_caller or ftrace_regs_caller.
+ * 	BL	ftrace_caller
  *
  * Each instrumented function follows the AAPCS, so here x0-x8 and x18-x30 are
  * live (x18 holds the Shadow Call Stack pointer), and x9-x17 are safe to
  * clobber.
  *
- * We save the callsite's context into a pt_regs before invoking any ftrace
- * callbacks. So that we can get a sensible backtrace, we create a stack record
- * for the callsite and the ftrace entry assembly. This is not sufficient for
- * reliable stacktrace: until we create the callsite stack record, its caller
- * is missing from the LR and existing chain of frame records.
+ * We save the callsite's context into a struct ftrace_regs before invoking any
+ * ftrace callbacks. So that we can get a sensible backtrace, we create frame
+ * records for the callsite and the ftrace entry assembly. This is not
+ * sufficient for reliable stacktrace: until we create the callsite stack
+ * record, its caller is missing from the LR and existing chain of frame
+ * records.
  */
-	.macro  ftrace_regs_entry, allregs=0
-	/* Make room for pt_regs, plus a callee frame */
-	sub	sp, sp, #(PT_REGS_SIZE + 16)
-
-	/* Save function arguments (and x9 for simplicity) */
-	stp	x0, x1, [sp, #S_X0]
-	stp	x2, x3, [sp, #S_X2]
-	stp	x4, x5, [sp, #S_X4]
-	stp	x6, x7, [sp, #S_X6]
-	stp	x8, x9, [sp, #S_X8]
-
-	/* Optionally save the callee-saved registers, always save the FP */
-	.if \allregs == 1
-	stp	x10, x11, [sp, #S_X10]
-	stp	x12, x13, [sp, #S_X12]
-	stp	x14, x15, [sp, #S_X14]
-	stp	x16, x17, [sp, #S_X16]
-	stp	x18, x19, [sp, #S_X18]
-	stp	x20, x21, [sp, #S_X20]
-	stp	x22, x23, [sp, #S_X22]
-	stp	x24, x25, [sp, #S_X24]
-	stp	x26, x27, [sp, #S_X26]
-	stp	x28, x29, [sp, #S_X28]
-	.else
-	str	x29, [sp, #S_FP]
-	.endif
-
-	/* Save the callsite's SP and LR */
-	add	x10, sp, #(PT_REGS_SIZE + 16)
-	stp	x9, x10, [sp, #S_LR]
+SYM_CODE_START(ftrace_caller)
+	bti	c
 
-	/* Save the PC after the ftrace callsite */
-	str	x30, [sp, #S_PC]
+	/* Save original SP */
+	mov	x10, sp
 
-	/* Create a frame record for the callsite above pt_regs */
-	stp	x29, x9, [sp, #PT_REGS_SIZE]
-	add	x29, sp, #PT_REGS_SIZE
+	/* Make room for ftrace regs, plus two frame records */
+	sub	sp, sp, #(FREGS_SIZE + 32)
 
-	/* Create our frame record within pt_regs. */
-	stp	x29, x30, [sp, #S_STACKFRAME]
-	add	x29, sp, #S_STACKFRAME
-	.endm
+	/* Save function arguments */
+	stp	x0, x1, [sp, #FREGS_X0]
+	stp	x2, x3, [sp, #FREGS_X2]
+	stp	x4, x5, [sp, #FREGS_X4]
+	stp	x6, x7, [sp, #FREGS_X6]
+	str	x8,     [sp, #FREGS_X8]
 
-SYM_CODE_START(ftrace_regs_caller)
-	bti	c
-	ftrace_regs_entry	1
-	b	ftrace_common
-SYM_CODE_END(ftrace_regs_caller)
+	/* Save the callsite's FP, LR, SP */
+	str	x29, [sp, #FREGS_FP]
+	str	x9,  [sp, #FREGS_LR]
+	str	x10, [sp, #FREGS_SP]
 
-SYM_CODE_START(ftrace_caller)
-	bti	c
-	ftrace_regs_entry	0
-	b	ftrace_common
-SYM_CODE_END(ftrace_caller)
+	/* Save the PC after the ftrace callsite */
+	str	x30, [sp, #FREGS_PC]
+
+	/* Create a frame record for the callsite above the ftrace regs */
+	stp	x29, x9, [sp, #FREGS_SIZE + 16]
+	add	x29, sp, #FREGS_SIZE + 16
+
+	/* Create our frame record above the ftrace regs */
+	stp	x29, x30, [sp, #FREGS_SIZE]
+	add	x29, sp, #FREGS_SIZE
 
-SYM_CODE_START(ftrace_common)
 	sub	x0, x30, #AARCH64_INSN_SIZE	// ip (callsite's BL insn)
 	mov	x1, x9				// parent_ip (callsite's LR)
 	ldr_l	x2, function_trace_op		// op
@@ -104,24 +79,24 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
  * to restore x0-x8, x29, and x30.
  */
 	/* Restore function arguments */
-	ldp	x0, x1, [sp]
-	ldp	x2, x3, [sp, #S_X2]
-	ldp	x4, x5, [sp, #S_X4]
-	ldp	x6, x7, [sp, #S_X6]
-	ldr	x8, [sp, #S_X8]
+	ldp	x0, x1, [sp, #FREGS_X0]
+	ldp	x2, x3, [sp, #FREGS_X2]
+	ldp	x4, x5, [sp, #FREGS_X4]
+	ldp	x6, x7, [sp, #FREGS_X6]
+	ldr	x8,     [sp, #FREGS_X8]
 
 	/* Restore the callsite's FP, LR, PC */
-	ldr	x29, [sp, #S_FP]
-	ldr	x30, [sp, #S_LR]
-	ldr	x9, [sp, #S_PC]
+	ldr	x29, [sp, #FREGS_FP]
+	ldr	x30, [sp, #FREGS_LR]
+	ldr	x9,  [sp, #FREGS_PC]
 
 	/* Restore the callsite's SP */
-	add	sp, sp, #PT_REGS_SIZE + 16
+	add	sp, sp, #FREGS_SIZE + 32
 
 	ret	x9
-SYM_CODE_END(ftrace_common)
+SYM_CODE_END(ftrace_caller)
 
-#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 
 /*
  * Gcc with -pg will put the following code in the beginning of each function:
@@ -195,44 +170,6 @@ SYM_CODE_END(ftrace_common)
 	add	\reg, \reg, #8
 	.endm
 
-#ifndef CONFIG_DYNAMIC_FTRACE
-/*
- * void _mcount(unsigned long return_address)
- * @return_address: return address to instrumented function
- *
- * This function makes calls, if enabled, to:
- *     - tracer function to probe instrumented function's entry,
- *     - ftrace_graph_caller to set up an exit hook
- */
-SYM_FUNC_START(_mcount)
-	mcount_enter
-
-	ldr_l	x2, ftrace_trace_function
-	adr	x0, ftrace_stub
-	cmp	x0, x2			// if (ftrace_trace_function
-	b.eq	skip_ftrace_call	//     != ftrace_stub) {
-
-	mcount_get_pc	x0		//       function's pc
-	mcount_get_lr	x1		//       function's lr (= parent's pc)
-	blr	x2			//   (*ftrace_trace_function)(pc, lr);
-
-skip_ftrace_call:			// }
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ldr_l	x2, ftrace_graph_return
-	cmp	x0, x2			//   if ((ftrace_graph_return
-	b.ne	ftrace_graph_caller	//        != ftrace_stub)
-
-	ldr_l	x2, ftrace_graph_entry	//     || (ftrace_graph_entry
-	adr_l	x0, ftrace_graph_entry_stub //     != ftrace_graph_entry_stub))
-	cmp	x0, x2
-	b.ne	ftrace_graph_caller	//     ftrace_graph_caller();
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-	mcount_exit
-SYM_FUNC_END(_mcount)
-EXPORT_SYMBOL(_mcount)
-NOKPROBE(_mcount)
-
-#else /* CONFIG_DYNAMIC_FTRACE */
 /*
  * _mcount() is used to build the kernel with -pg option, but all the branch
  * instructions to _mcount() are replaced to NOP initially at kernel start up,
@@ -272,7 +209,6 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL) // ftrace_graph_caller();
 
 	mcount_exit
 SYM_FUNC_END(ftrace_caller)
-#endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
@@ -293,17 +229,17 @@ SYM_FUNC_START(ftrace_graph_caller)
 	mcount_exit
 SYM_FUNC_END(ftrace_graph_caller)
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 
 SYM_TYPED_FUNC_START(ftrace_stub)
 	ret
 SYM_FUNC_END(ftrace_stub)
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 SYM_TYPED_FUNC_START(ftrace_stub_graph)
 	ret
 SYM_FUNC_END(ftrace_stub_graph)
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
  * void return_to_handler(void)
  *
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index e28137d64b76..11cb99c4d298 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -197,6 +197,9 @@ alternative_cb_end
 	.endm
 
 	.macro	kernel_entry, el, regsize = 64
+	.if	\el == 0
+	alternative_insn nop, SET_PSTATE_DIT(1), ARM64_HAS_DIT
+	.endif
 	.if	\regsize == 32
 	mov	w0, w0				// zero upper 32 bits of x0
 	.endif
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 23834d96d1e7..dcc81e7200d4 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -118,16 +118,8 @@
  *   returned from the 2nd syscall yet, TIF_FOREIGN_FPSTATE is still set so
  *   whatever is in the FPSIMD registers is not saved to memory, but discarded.
  */
-struct fpsimd_last_state_struct {
-	struct user_fpsimd_state *st;
-	void *sve_state;
-	void *za_state;
-	u64 *svcr;
-	unsigned int sve_vl;
-	unsigned int sme_vl;
-};
 
-static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state);
+static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
 
 __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {
 #ifdef CONFIG_ARM64_SVE
@@ -330,15 +322,6 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
  *    The task can execute SVE instructions while in userspace without
  *    trapping to the kernel.
  *
- *    When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
- *    corresponding Zn), P0-P15 and FFR are encoded in
- *    task->thread.sve_state, formatted appropriately for vector
- *    length task->thread.sve_vl or, if SVCR.SM is set,
- *    task->thread.sme_vl.
- *
- *    task->thread.sve_state must point to a valid buffer at least
- *    sve_state_size(task) bytes in size.
- *
  *    During any syscall, the kernel may optionally clear TIF_SVE and
  *    discard the vector state except for the FPSIMD subset.
  *
@@ -348,7 +331,15 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
  *    do_sve_acc() to be called, which does some preparation and then
  *    sets TIF_SVE.
  *
- *    When stored, FPSIMD registers V0-V31 are encoded in
+ * During any syscall, the kernel may optionally clear TIF_SVE and
+ * discard the vector state except for the FPSIMD subset.
+ *
+ * The data will be stored in one of two formats:
+ *
+ *  * FPSIMD only - FP_STATE_FPSIMD:
+ *
+ *    When the FPSIMD only state stored task->thread.fp_type is set to
+ *    FP_STATE_FPSIMD, the FPSIMD registers V0-V31 are encoded in
  *    task->thread.uw.fpsimd_state; bits [max : 128] for each of Z0-Z31 are
  *    logically zero but not stored anywhere; P0-P15 and FFR are not
  *    stored and have unspecified values from userspace's point of
@@ -356,7 +347,23 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
  *    but userspace is discouraged from relying on this.
  *
  *    task->thread.sve_state does not need to be non-NULL, valid or any
- *    particular size: it must not be dereferenced.
+ *    particular size: it must not be dereferenced and any data stored
+ *    there should be considered stale and not referenced.
+ *
+ *  * SVE state - FP_STATE_SVE:
+ *
+ *    When the full SVE state is stored task->thread.fp_type is set to
+ *    FP_STATE_SVE and Z0-Z31 (incorporating Vn in bits[127:0] or the
+ *    corresponding Zn), P0-P15 and FFR are encoded in in
+ *    task->thread.sve_state, formatted appropriately for vector
+ *    length task->thread.sve_vl or, if SVCR.SM is set,
+ *    task->thread.sme_vl. The storage for the vector registers in
+ *    task->thread.uw.fpsimd_state should be ignored.
+ *
+ *    task->thread.sve_state must point to a valid buffer at least
+ *    sve_state_size(task) bytes in size. The data stored in
+ *    task->thread.uw.fpsimd_state.vregs should be considered stale
+ *    and not referenced.
  *
  *  * FPSR and FPCR are always stored in task->thread.uw.fpsimd_state
  *    irrespective of whether TIF_SVE is clear or set, since these are
@@ -378,11 +385,37 @@ static void task_fpsimd_load(void)
 	WARN_ON(!system_supports_fpsimd());
 	WARN_ON(!have_cpu_fpsimd_context());
 
-	/* Check if we should restore SVE first */
-	if (IS_ENABLED(CONFIG_ARM64_SVE) && test_thread_flag(TIF_SVE)) {
-		sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1);
-		restore_sve_regs = true;
-		restore_ffr = true;
+	if (system_supports_sve()) {
+		switch (current->thread.fp_type) {
+		case FP_STATE_FPSIMD:
+			/* Stop tracking SVE for this task until next use. */
+			if (test_and_clear_thread_flag(TIF_SVE))
+				sve_user_disable();
+			break;
+		case FP_STATE_SVE:
+			if (!thread_sm_enabled(&current->thread) &&
+			    !WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE)))
+				sve_user_enable();
+
+			if (test_thread_flag(TIF_SVE))
+				sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1);
+
+			restore_sve_regs = true;
+			restore_ffr = true;
+			break;
+		default:
+			/*
+			 * This indicates either a bug in
+			 * fpsimd_save() or memory corruption, we
+			 * should always record an explicit format
+			 * when we save. We always at least have the
+			 * memory allocated for FPSMID registers so
+			 * try that and hope for the best.
+			 */
+			WARN_ON_ONCE(1);
+			clear_thread_flag(TIF_SVE);
+			break;
+		}
 	}
 
 	/* Restore SME, override SVE register configuration if needed */
@@ -398,18 +431,19 @@ static void task_fpsimd_load(void)
 		if (thread_za_enabled(&current->thread))
 			za_load_state(current->thread.za_state);
 
-		if (thread_sm_enabled(&current->thread)) {
-			restore_sve_regs = true;
+		if (thread_sm_enabled(&current->thread))
 			restore_ffr = system_supports_fa64();
-		}
 	}
 
-	if (restore_sve_regs)
+	if (restore_sve_regs) {
+		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_SVE);
 		sve_load_state(sve_pffr(&current->thread),
 			       &current->thread.uw.fpsimd_state.fpsr,
 			       restore_ffr);
-	else
+	} else {
+		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_FPSIMD);
 		fpsimd_load_state(&current->thread.uw.fpsimd_state);
+	}
 }
 
 /*
@@ -419,12 +453,12 @@ static void task_fpsimd_load(void)
  * last, if KVM is involved this may be the guest VM context rather
  * than the host thread for the VM pointed to by current. This means
  * that we must always reference the state storage via last rather
- * than via current, other than the TIF_ flags which KVM will
- * carefully maintain for us.
+ * than via current, if we are saving KVM state then it will have
+ * ensured that the type of registers to save is set in last->to_save.
  */
 static void fpsimd_save(void)
 {
-	struct fpsimd_last_state_struct const *last =
+	struct cpu_fp_state const *last =
 		this_cpu_ptr(&fpsimd_last_state);
 	/* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */
 	bool save_sve_regs = false;
@@ -437,7 +471,14 @@ static void fpsimd_save(void)
 	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
 		return;
 
-	if (test_thread_flag(TIF_SVE)) {
+	/*
+	 * If a task is in a syscall the ABI allows us to only
+	 * preserve the state shared with FPSIMD so don't bother
+	 * saving the full SVE state in that case.
+	 */
+	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE) &&
+	     !in_syscall(current_pt_regs())) ||
+	    last->to_save == FP_STATE_SVE) {
 		save_sve_regs = true;
 		save_ffr = true;
 		vl = last->sve_vl;
@@ -474,8 +515,10 @@ static void fpsimd_save(void)
 		sve_save_state((char *)last->sve_state +
 					sve_ffr_offset(vl),
 			       &last->st->fpsr, save_ffr);
+		*last->fp_type = FP_STATE_SVE;
 	} else {
 		fpsimd_save_state(last->st);
+		*last->fp_type = FP_STATE_FPSIMD;
 	}
 }
 
@@ -768,8 +811,7 @@ void fpsimd_sync_to_sve(struct task_struct *task)
  */
 void sve_sync_to_fpsimd(struct task_struct *task)
 {
-	if (test_tsk_thread_flag(task, TIF_SVE) ||
-	    thread_sm_enabled(&task->thread))
+	if (task->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(task);
 }
 
@@ -848,8 +890,10 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 
 	fpsimd_flush_task_state(task);
 	if (test_and_clear_tsk_thread_flag(task, TIF_SVE) ||
-	    thread_sm_enabled(&task->thread))
+	    thread_sm_enabled(&task->thread)) {
 		sve_to_fpsimd(task);
+		task->thread.fp_type = FP_STATE_FPSIMD;
+	}
 
 	if (system_supports_sme() && type == ARM64_VEC_SME) {
 		task->thread.svcr &= ~(SVCR_SM_MASK |
@@ -1368,6 +1412,7 @@ static void sve_init_regs(void)
 		fpsimd_bind_task_to_cpu();
 	} else {
 		fpsimd_to_sve(current);
+		current->thread.fp_type = FP_STATE_SVE;
 	}
 }
 
@@ -1596,6 +1641,8 @@ void fpsimd_flush_thread(void)
 		current->thread.svcr = 0;
 	}
 
+	current->thread.fp_type = FP_STATE_FPSIMD;
+
 	put_cpu_fpsimd_context();
 	kfree(sve_state);
 	kfree(za_state);
@@ -1628,14 +1675,38 @@ void fpsimd_signal_preserve_current_state(void)
 }
 
 /*
+ * Called by KVM when entering the guest.
+ */
+void fpsimd_kvm_prepare(void)
+{
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * KVM does not save host SVE state since we can only enter
+	 * the guest from a syscall so the ABI means that only the
+	 * non-saved SVE state needs to be saved.  If we have left
+	 * SVE enabled for performance reasons then update the task
+	 * state to be FPSIMD only.
+	 */
+	get_cpu_fpsimd_context();
+
+	if (test_and_clear_thread_flag(TIF_SVE)) {
+		sve_to_fpsimd(current);
+		current->thread.fp_type = FP_STATE_FPSIMD;
+	}
+
+	put_cpu_fpsimd_context();
+}
+
+/*
  * Associate current's FPSIMD context with this cpu
  * The caller must have ownership of the cpu FPSIMD context before calling
  * this function.
  */
 static void fpsimd_bind_task_to_cpu(void)
 {
-	struct fpsimd_last_state_struct *last =
-		this_cpu_ptr(&fpsimd_last_state);
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
 
 	WARN_ON(!system_supports_fpsimd());
 	last->st = &current->thread.uw.fpsimd_state;
@@ -1644,6 +1715,8 @@ static void fpsimd_bind_task_to_cpu(void)
 	last->sve_vl = task_get_sve_vl(current);
 	last->sme_vl = task_get_sme_vl(current);
 	last->svcr = &current->thread.svcr;
+	last->fp_type = &current->thread.fp_type;
+	last->to_save = FP_STATE_CURRENT;
 	current->thread.fpsimd_cpu = smp_processor_id();
 
 	/*
@@ -1665,22 +1738,14 @@ static void fpsimd_bind_task_to_cpu(void)
 	}
 }
 
-void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state,
-			      unsigned int sve_vl, void *za_state,
-			      unsigned int sme_vl, u64 *svcr)
+void fpsimd_bind_state_to_cpu(struct cpu_fp_state *state)
 {
-	struct fpsimd_last_state_struct *last =
-		this_cpu_ptr(&fpsimd_last_state);
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
 
 	WARN_ON(!system_supports_fpsimd());
 	WARN_ON(!in_softirq() && !irqs_disabled());
 
-	last->st = st;
-	last->svcr = svcr;
-	last->sve_state = sve_state;
-	last->za_state = za_state;
-	last->sve_vl = sve_vl;
-	last->sme_vl = sme_vl;
+	*last = *state;
 }
 
 /*
@@ -1838,7 +1903,7 @@ void kernel_neon_begin(void)
 	/* Invalidate any task state remaining in the fpsimd regs: */
 	fpsimd_flush_cpu_state();
 }
-EXPORT_SYMBOL(kernel_neon_begin);
+EXPORT_SYMBOL_GPL(kernel_neon_begin);
 
 /*
  * kernel_neon_end(): give the CPU FPSIMD registers back to the current task
@@ -1856,7 +1921,7 @@ void kernel_neon_end(void)
 
 	put_cpu_fpsimd_context();
 }
-EXPORT_SYMBOL(kernel_neon_end);
+EXPORT_SYMBOL_GPL(kernel_neon_end);
 
 #ifdef CONFIG_EFI
 
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index 8745175f4a75..b30b955a8921 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -17,7 +17,49 @@
 #include <asm/insn.h>
 #include <asm/patching.h>
 
-#ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+struct fregs_offset {
+	const char *name;
+	int offset;
+};
+
+#define FREGS_OFFSET(n, field)				\
+{							\
+	.name = n,					\
+	.offset = offsetof(struct ftrace_regs, field),	\
+}
+
+static const struct fregs_offset fregs_offsets[] = {
+	FREGS_OFFSET("x0", regs[0]),
+	FREGS_OFFSET("x1", regs[1]),
+	FREGS_OFFSET("x2", regs[2]),
+	FREGS_OFFSET("x3", regs[3]),
+	FREGS_OFFSET("x4", regs[4]),
+	FREGS_OFFSET("x5", regs[5]),
+	FREGS_OFFSET("x6", regs[6]),
+	FREGS_OFFSET("x7", regs[7]),
+	FREGS_OFFSET("x8", regs[8]),
+
+	FREGS_OFFSET("x29", fp),
+	FREGS_OFFSET("x30", lr),
+	FREGS_OFFSET("lr", lr),
+
+	FREGS_OFFSET("sp", sp),
+	FREGS_OFFSET("pc", pc),
+};
+
+int ftrace_regs_query_register_offset(const char *name)
+{
+	for (int i = 0; i < ARRAY_SIZE(fregs_offsets); i++) {
+		const struct fregs_offset *roff = &fregs_offsets[i];
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	}
+
+	return -EINVAL;
+}
+#endif
+
 /*
  * Replace a single instruction, which may be a branch or NOP.
  * If @validate == true, a replaced instruction is checked against 'old'.
@@ -70,9 +112,6 @@ static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
 
 	if (addr == FTRACE_ADDR)
 		return &plt[FTRACE_PLT_IDX];
-	if (addr == FTRACE_REGS_ADDR &&
-	    IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS))
-		return &plt[FTRACE_REGS_PLT_IDX];
 #endif
 	return NULL;
 }
@@ -154,25 +193,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	return ftrace_modify_code(pc, old, new, true);
 }
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
-			unsigned long addr)
-{
-	unsigned long pc = rec->ip;
-	u32 old, new;
-
-	if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
-		return -EINVAL;
-	if (!ftrace_find_callable_addr(rec, NULL, &addr))
-		return -EINVAL;
-
-	old = aarch64_insn_gen_branch_imm(pc, old_addr,
-					  AARCH64_INSN_BRANCH_LINK);
-	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
-
-	return ftrace_modify_code(pc, old, new, true);
-}
-
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 /*
  * The compiler has inserted two NOPs before the regular function prologue.
  * All instrumented functions follow the AAPCS, so x0-x8 and x19-x30 are live,
@@ -228,7 +249,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 	 *
 	 * Note: 'mod' is only set at module load time.
 	 */
-	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) &&
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS) &&
 	    IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) && mod) {
 		return aarch64_insn_patch_text_nosync((void *)pc, new);
 	}
@@ -246,7 +267,6 @@ void arch_ftrace_update_code(int command)
 	command |= FTRACE_MAY_SLEEP;
 	ftrace_modify_all_code(command);
 }
-#endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
@@ -277,21 +297,11 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 	}
 }
 
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs)
 {
-	/*
-	 * When DYNAMIC_FTRACE_WITH_REGS is selected, `fregs` can never be NULL
-	 * and arch_ftrace_get_regs(fregs) will always give a non-NULL pt_regs
-	 * in which we can safely modify the LR.
-	 */
-	struct pt_regs *regs = arch_ftrace_get_regs(fregs);
-	unsigned long *parent = (unsigned long *)&procedure_link_pointer(regs);
-
-	prepare_ftrace_return(ip, parent, frame_pointer(regs));
+	prepare_ftrace_return(ip, &fregs->lr, fregs->fp);
 }
 #else
 /*
@@ -323,6 +333,5 @@ int ftrace_disable_ftrace_graph_caller(void)
 {
 	return ftrace_modify_graph_caller(false);
 }
-#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
-#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 2196aad7b55b..952e17bd1c0b 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -462,6 +462,9 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 	bl	early_fdt_map			// Try mapping the FDT early
 	mov	x0, x20				// pass the full boot status
 	bl	init_feature_override		// Parse cpu feature overrides
+#ifdef CONFIG_UNWIND_PATCH_PAC_INTO_SCS
+	bl	scs_patch_vmlinux
+#endif
 	mov	x0, x20
 	bl	finalise_el2			// Prefer VHE if possible
 	ldp	x29, x30, [sp], #16
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 38dbd3828f13..6ad5c6ef5329 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -10,20 +10,21 @@
  * Copyright (C) 2012 ARM Ltd.
  */
 
-#include <linux/irq.h>
-#include <linux/memory.h>
-#include <linux/smp.h>
 #include <linux/hardirq.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/kprobes.h>
+#include <linux/memory.h>
 #include <linux/scs.h>
 #include <linux/seq_file.h>
+#include <linux/smp.h>
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
 #include <asm/exception.h>
-#include <asm/vmap_stack.h>
 #include <asm/softirq_stack.h>
+#include <asm/stacktrace.h>
+#include <asm/vmap_stack.h>
 
 /* Only access this in an NMI enter/exit */
 DEFINE_PER_CPU(struct nmi_ctx, nmi_contexts);
@@ -41,7 +42,7 @@ static void init_irq_scs(void)
 {
 	int cpu;
 
-	if (!IS_ENABLED(CONFIG_SHADOW_CALL_STACK))
+	if (!scs_is_enabled())
 		return;
 
 	for_each_possible_cpu(cpu)
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index 76b41e4ca9fa..5af4975caeb5 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -15,9 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/moduleloader.h>
+#include <linux/scs.h>
 #include <linux/vmalloc.h>
 #include <asm/alternative.h>
 #include <asm/insn.h>
+#include <asm/scs.h>
 #include <asm/sections.h>
 
 void *module_alloc(unsigned long size)
@@ -497,9 +499,6 @@ static int module_init_ftrace_plt(const Elf_Ehdr *hdr,
 
 	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
 
-	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS))
-		__init_plt(&plts[FTRACE_REGS_PLT_IDX], FTRACE_REGS_ADDR);
-
 	mod->arch.ftrace_trampolines = plts;
 #endif
 	return 0;
@@ -514,5 +513,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 	if (s)
 		apply_alternatives_module((void *)s->sh_addr, s->sh_size);
 
+	if (scs_is_dynamic()) {
+		s = find_section(hdr, sechdrs, ".init.eh_frame");
+		if (s)
+			scs_patch((void *)s->sh_addr, s->sh_size);
+	}
+
 	return module_init_ftrace_plt(hdr, sechdrs, me);
 }
diff --git a/arch/arm64/kernel/paravirt.c b/arch/arm64/kernel/paravirt.c
index 57c7c211f8c7..aa718d6a9274 100644
--- a/arch/arm64/kernel/paravirt.c
+++ b/arch/arm64/kernel/paravirt.c
@@ -141,10 +141,6 @@ static bool __init has_pv_steal_clock(void)
 {
 	struct arm_smccc_res res;
 
-	/* To detect the presence of PV time support we require SMCCC 1.1+ */
-	if (arm_smccc_1_1_get_conduit() == SMCCC_CONDUIT_NONE)
-		return false;
-
 	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
 			     ARM_SMCCC_HV_PV_TIME_FEATURES, &res);
 
diff --git a/arch/arm64/kernel/patch-scs.c b/arch/arm64/kernel/patch-scs.c
new file mode 100644
index 000000000000..1b3da02d5b74
--- /dev/null
+++ b/arch/arm64/kernel/patch-scs.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 - Google LLC
+ * Author: Ard Biesheuvel <ardb@google.com>
+ */
+
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+#include <asm/cacheflush.h>
+#include <asm/scs.h>
+
+//
+// This minimal DWARF CFI parser is partially based on the code in
+// arch/arc/kernel/unwind.c, and on the document below:
+// https://refspecs.linuxbase.org/LSB_4.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
+//
+
+#define DW_CFA_nop                          0x00
+#define DW_CFA_set_loc                      0x01
+#define DW_CFA_advance_loc1                 0x02
+#define DW_CFA_advance_loc2                 0x03
+#define DW_CFA_advance_loc4                 0x04
+#define DW_CFA_offset_extended              0x05
+#define DW_CFA_restore_extended             0x06
+#define DW_CFA_undefined                    0x07
+#define DW_CFA_same_value                   0x08
+#define DW_CFA_register                     0x09
+#define DW_CFA_remember_state               0x0a
+#define DW_CFA_restore_state                0x0b
+#define DW_CFA_def_cfa                      0x0c
+#define DW_CFA_def_cfa_register             0x0d
+#define DW_CFA_def_cfa_offset               0x0e
+#define DW_CFA_def_cfa_expression           0x0f
+#define DW_CFA_expression                   0x10
+#define DW_CFA_offset_extended_sf           0x11
+#define DW_CFA_def_cfa_sf                   0x12
+#define DW_CFA_def_cfa_offset_sf            0x13
+#define DW_CFA_val_offset                   0x14
+#define DW_CFA_val_offset_sf                0x15
+#define DW_CFA_val_expression               0x16
+#define DW_CFA_lo_user                      0x1c
+#define DW_CFA_negate_ra_state              0x2d
+#define DW_CFA_GNU_args_size                0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+#define DW_CFA_hi_user                      0x3f
+
+extern const u8 __eh_frame_start[], __eh_frame_end[];
+
+enum {
+	PACIASP		= 0xd503233f,
+	AUTIASP		= 0xd50323bf,
+	SCS_PUSH	= 0xf800865e,
+	SCS_POP		= 0xf85f8e5e,
+};
+
+static void __always_inline scs_patch_loc(u64 loc)
+{
+	u32 insn = le32_to_cpup((void *)loc);
+
+	switch (insn) {
+	case PACIASP:
+		*(u32 *)loc = cpu_to_le32(SCS_PUSH);
+		break;
+	case AUTIASP:
+		*(u32 *)loc = cpu_to_le32(SCS_POP);
+		break;
+	default:
+		/*
+		 * While the DW_CFA_negate_ra_state directive is guaranteed to
+		 * appear right after a PACIASP/AUTIASP instruction, it may
+		 * also appear after a DW_CFA_restore_state directive that
+		 * restores a state that is only partially accurate, and is
+		 * followed by DW_CFA_negate_ra_state directive to toggle the
+		 * PAC bit again. So we permit other instructions here, and ignore
+		 * them.
+		 */
+		return;
+	}
+	dcache_clean_pou(loc, loc + sizeof(u32));
+}
+
+/*
+ * Skip one uleb128/sleb128 encoded quantity from the opcode stream. All bytes
+ * except the last one have bit #7 set.
+ */
+static int __always_inline skip_xleb128(const u8 **opcode, int size)
+{
+	u8 c;
+
+	do {
+		c = *(*opcode)++;
+		size--;
+	} while (c & BIT(7));
+
+	return size;
+}
+
+struct eh_frame {
+	/*
+	 * The size of this frame if 0 < size < U32_MAX, 0 terminates the list.
+	 */
+	u32	size;
+
+	/*
+	 * The first frame is a Common Information Entry (CIE) frame, followed
+	 * by one or more Frame Description Entry (FDE) frames. In the former
+	 * case, this field is 0, otherwise it is the negated offset relative
+	 * to the associated CIE frame.
+	 */
+	u32	cie_id_or_pointer;
+
+	union {
+		struct { // CIE
+			u8	version;
+			u8	augmentation_string[];
+		};
+
+		struct { // FDE
+			s32	initial_loc;
+			s32	range;
+			u8	opcodes[];
+		};
+	};
+};
+
+static int noinstr scs_handle_fde_frame(const struct eh_frame *frame,
+					bool fde_has_augmentation_data,
+					int code_alignment_factor)
+{
+	int size = frame->size - offsetof(struct eh_frame, opcodes) + 4;
+	u64 loc = (u64)offset_to_ptr(&frame->initial_loc);
+	const u8 *opcode = frame->opcodes;
+
+	if (fde_has_augmentation_data) {
+		int l;
+
+		// assume single byte uleb128_t
+		if (WARN_ON(*opcode & BIT(7)))
+			return -ENOEXEC;
+
+		l = *opcode++;
+		opcode += l;
+		size -= l + 1;
+	}
+
+	/*
+	 * Starting from 'loc', apply the CFA opcodes that advance the location
+	 * pointer, and identify the locations of the PAC instructions.
+	 */
+	while (size-- > 0) {
+		switch (*opcode++) {
+		case DW_CFA_nop:
+		case DW_CFA_remember_state:
+		case DW_CFA_restore_state:
+			break;
+
+		case DW_CFA_advance_loc1:
+			loc += *opcode++ * code_alignment_factor;
+			size--;
+			break;
+
+		case DW_CFA_advance_loc2:
+			loc += *opcode++ * code_alignment_factor;
+			loc += (*opcode++ << 8) * code_alignment_factor;
+			size -= 2;
+			break;
+
+		case DW_CFA_def_cfa:
+		case DW_CFA_offset_extended:
+			size = skip_xleb128(&opcode, size);
+			fallthrough;
+		case DW_CFA_def_cfa_offset:
+		case DW_CFA_def_cfa_offset_sf:
+		case DW_CFA_def_cfa_register:
+		case DW_CFA_same_value:
+		case DW_CFA_restore_extended:
+		case 0x80 ... 0xbf:
+			size = skip_xleb128(&opcode, size);
+			break;
+
+		case DW_CFA_negate_ra_state:
+			scs_patch_loc(loc - 4);
+			break;
+
+		case 0x40 ... 0x7f:
+			// advance loc
+			loc += (opcode[-1] & 0x3f) * code_alignment_factor;
+			break;
+
+		case 0xc0 ... 0xff:
+			break;
+
+		default:
+			pr_err("unhandled opcode: %02x in FDE frame %lx\n", opcode[-1], (uintptr_t)frame);
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int noinstr scs_patch(const u8 eh_frame[], int size)
+{
+	const u8 *p = eh_frame;
+
+	while (size > 4) {
+		const struct eh_frame *frame = (const void *)p;
+		bool fde_has_augmentation_data = true;
+		int code_alignment_factor = 1;
+		int ret;
+
+		if (frame->size == 0 ||
+		    frame->size == U32_MAX ||
+		    frame->size > size)
+			break;
+
+		if (frame->cie_id_or_pointer == 0) {
+			const u8 *p = frame->augmentation_string;
+
+			/* a 'z' in the augmentation string must come first */
+			fde_has_augmentation_data = *p == 'z';
+
+			/*
+			 * The code alignment factor is a uleb128 encoded field
+			 * but given that the only sensible values are 1 or 4,
+			 * there is no point in decoding the whole thing.
+			 */
+			p += strlen(p) + 1;
+			if (!WARN_ON(*p & BIT(7)))
+				code_alignment_factor = *p;
+		} else {
+			ret = scs_handle_fde_frame(frame,
+						   fde_has_augmentation_data,
+						   code_alignment_factor);
+			if (ret)
+				return ret;
+		}
+
+		p += sizeof(frame->size) + frame->size;
+		size -= sizeof(frame->size) + frame->size;
+	}
+	return 0;
+}
+
+asmlinkage void __init scs_patch_vmlinux(void)
+{
+	if (!should_patch_pac_into_scs())
+		return;
+
+	WARN_ON(scs_patch(__eh_frame_start, __eh_frame_end - __eh_frame_start));
+	icache_inval_all_pou();
+	isb();
+}
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 7b0643fe2f13..a5193f2146a6 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -806,10 +806,14 @@ static void armv8pmu_disable_event(struct perf_event *event)
 
 static void armv8pmu_start(struct arm_pmu *cpu_pmu)
 {
-	struct perf_event_context *task_ctx =
-		this_cpu_ptr(cpu_pmu->pmu.pmu_cpu_context)->task_ctx;
+	struct perf_event_context *ctx;
+	int nr_user = 0;
 
-	if (sysctl_perf_user_access && task_ctx && task_ctx->nr_user)
+	ctx = perf_cpu_task_ctx();
+	if (ctx)
+		nr_user = ctx->nr_user;
+
+	if (sysctl_perf_user_access && nr_user)
 		armv8pmu_enable_user_access(cpu_pmu);
 	else
 		armv8pmu_disable_user_access();
@@ -1019,10 +1023,10 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event,
 	return 0;
 }
 
-static int armv8pmu_filter_match(struct perf_event *event)
+static bool armv8pmu_filter(struct pmu *pmu, int cpu)
 {
-	unsigned long evtype = event->hw.config_base & ARMV8_PMU_EVTYPE_EVENT;
-	return evtype != ARMV8_PMUV3_PERFCTR_CHAIN;
+	struct arm_pmu *armpmu = to_arm_pmu(pmu);
+	return !cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus);
 }
 
 static void armv8pmu_reset(void *info)
@@ -1146,7 +1150,8 @@ static void __armv8pmu_probe_pmu(void *info)
 	dfr0 = read_sysreg(id_aa64dfr0_el1);
 	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
 			ID_AA64DFR0_EL1_PMUVer_SHIFT);
-	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF || pmuver == 0)
+	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF ||
+	    pmuver == ID_AA64DFR0_EL1_PMUVer_NI)
 		return;
 
 	cpu_pmu->pmuver = pmuver;
@@ -1253,7 +1258,7 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
 	cpu_pmu->stop			= armv8pmu_stop;
 	cpu_pmu->reset			= armv8pmu_reset;
 	cpu_pmu->set_event_filter	= armv8pmu_set_event_filter;
-	cpu_pmu->filter_match		= armv8pmu_filter_match;
+	cpu_pmu->filter			= armv8pmu_filter;
 
 	cpu_pmu->pmu.event_idx		= armv8pmu_user_event_idx;
 
diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
index 839291430cb3..4c0ea3cd4ea4 100644
--- a/arch/arm64/kernel/pi/Makefile
+++ b/arch/arm64/kernel/pi/Makefile
@@ -7,6 +7,7 @@ KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
 		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 		   -include $(srctree)/include/linux/hidden.h \
 		   -D__DISABLE_EXPORTS -ffreestanding -D__NO_FORTIFY \
+		   -fno-asynchronous-unwind-tables -fno-unwind-tables \
 		   $(call cc-option,-fno-addrsig)
 
 # remove SCS flags from all objects in this directory
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 104101f633b1..968d5fffe233 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -24,7 +24,7 @@ static bool __kprobes aarch64_insn_is_steppable(u32 insn)
 	 * currently safe. Lastly, MSR instructions can do any number of nasty
 	 * things we can't handle during single-stepping.
 	 */
-	if (aarch64_get_insn_class(insn) == AARCH64_INSN_CLS_BR_SYS) {
+	if (aarch64_insn_is_class_branch_sys(insn)) {
 		if (aarch64_insn_is_branch(insn) ||
 		    aarch64_insn_is_msr_imm(insn) ||
 		    aarch64_insn_is_msr_reg(insn) ||
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index c9e4d0720285..f35d059a9a36 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -294,19 +294,12 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 		}
 
 		break;
-	case KPROBE_HIT_ACTIVE:
-	case KPROBE_HIT_SSDONE:
-		/*
-		 * In case the user-specified fault handler returned
-		 * zero, try to fix up.
-		 */
-		if (fixup_exception(regs))
-			return 1;
 	}
 	return 0;
 }
 
-static void __kprobes kprobe_handler(struct pt_regs *regs)
+static int __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
 {
 	struct kprobe *p, *cur_kprobe;
 	struct kprobe_ctlblk *kcb;
@@ -316,39 +309,44 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
 	cur_kprobe = kprobe_running();
 
 	p = get_kprobe((kprobe_opcode_t *) addr);
+	if (WARN_ON_ONCE(!p)) {
+		/*
+		 * Something went wrong. This BRK used an immediate reserved
+		 * for kprobes, but we couldn't find any corresponding probe.
+		 */
+		return DBG_HOOK_ERROR;
+	}
 
-	if (p) {
-		if (cur_kprobe) {
-			if (reenter_kprobe(p, regs, kcb))
-				return;
-		} else {
-			/* Probe hit */
-			set_current_kprobe(p);
-			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
-			/*
-			 * If we have no pre-handler or it returned 0, we
-			 * continue with normal processing.  If we have a
-			 * pre-handler and it returned non-zero, it will
-			 * modify the execution path and no need to single
-			 * stepping. Let's just reset current kprobe and exit.
-			 */
-			if (!p->pre_handler || !p->pre_handler(p, regs)) {
-				setup_singlestep(p, regs, kcb, 0);
-			} else
-				reset_current_kprobe();
-		}
+	if (cur_kprobe) {
+		/* Hit a kprobe inside another kprobe */
+		if (!reenter_kprobe(p, regs, kcb))
+			return DBG_HOOK_ERROR;
+	} else {
+		/* Probe hit */
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+		/*
+		 * If we have no pre-handler or it returned 0, we
+		 * continue with normal processing.  If we have a
+		 * pre-handler and it returned non-zero, it will
+		 * modify the execution path and not need to single-step
+		 * Let's just reset current kprobe and exit.
+		 */
+		if (!p->pre_handler || !p->pre_handler(p, regs))
+			setup_singlestep(p, regs, kcb, 0);
+		else
+			reset_current_kprobe();
 	}
-	/*
-	 * The breakpoint instruction was removed right
-	 * after we hit it.  Another cpu has removed
-	 * either a probepoint or a debugger breakpoint
-	 * at this address.  In either case, no further
-	 * handling of this interrupt is appropriate.
-	 * Return back to original instruction, and continue.
-	 */
+
+	return DBG_HOOK_HANDLED;
 }
 
+static struct break_hook kprobes_break_hook = {
+	.imm = KPROBES_BRK_IMM,
+	.fn = kprobe_breakpoint_handler,
+};
+
 static int __kprobes
 kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned long esr)
 {
@@ -373,18 +371,6 @@ static struct break_hook kprobes_break_ss_hook = {
 	.fn = kprobe_breakpoint_ss_handler,
 };
 
-static int __kprobes
-kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
-{
-	kprobe_handler(regs);
-	return DBG_HOOK_HANDLED;
-}
-
-static struct break_hook kprobes_break_hook = {
-	.imm = KPROBES_BRK_IMM,
-	.fn = kprobe_breakpoint_handler,
-};
-
 /*
  * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
  * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 1395a1638427..269ac1c25ae2 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -331,6 +331,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 		clear_tsk_thread_flag(dst, TIF_SME);
 	}
 
+	dst->thread.fp_type = FP_STATE_FPSIMD;
+
 	/* clear any pending asynchronous tag fault raised by the parent */
 	clear_tsk_thread_flag(dst, TIF_MTE_ASYNC_FAULT);
 
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index bfce41c2a53b..fca9cc6f5581 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -521,10 +521,13 @@ bool has_spectre_v4(const struct arm64_cpu_capabilities *cap, int scope)
 	return state != SPECTRE_UNAFFECTED;
 }
 
-static int ssbs_emulation_handler(struct pt_regs *regs, u32 instr)
+bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr)
 {
-	if (user_mode(regs))
-		return 1;
+	const u32 instr_mask = ~(1U << PSTATE_Imm_shift);
+	const u32 instr_val = 0xd500401f | PSTATE_SSBS;
+
+	if ((instr & instr_mask) != instr_val)
+		return false;
 
 	if (instr & BIT(PSTATE_Imm_shift))
 		regs->pstate |= PSR_SSBS_BIT;
@@ -532,19 +535,11 @@ static int ssbs_emulation_handler(struct pt_regs *regs, u32 instr)
 		regs->pstate &= ~PSR_SSBS_BIT;
 
 	arm64_skip_faulting_instruction(regs, 4);
-	return 0;
+	return true;
 }
 
-static struct undef_hook ssbs_emulation_hook = {
-	.instr_mask	= ~(1U << PSTATE_Imm_shift),
-	.instr_val	= 0xd500401f | PSTATE_SSBS,
-	.fn		= ssbs_emulation_handler,
-};
-
 static enum mitigation_state spectre_v4_enable_hw_mitigation(void)
 {
-	static bool undef_hook_registered = false;
-	static DEFINE_RAW_SPINLOCK(hook_lock);
 	enum mitigation_state state;
 
 	/*
@@ -555,13 +550,6 @@ static enum mitigation_state spectre_v4_enable_hw_mitigation(void)
 	if (state != SPECTRE_MITIGATED || !this_cpu_has_cap(ARM64_SSBS))
 		return state;
 
-	raw_spin_lock(&hook_lock);
-	if (!undef_hook_registered) {
-		register_undef_hook(&ssbs_emulation_hook);
-		undef_hook_registered = true;
-	}
-	raw_spin_unlock(&hook_lock);
-
 	if (spectre_v4_mitigations_off()) {
 		sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_DSSBS);
 		set_pstate_ssbs(1);
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index c2fb5755bbec..979dbdc36d52 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -907,8 +907,7 @@ static int sve_set_common(struct task_struct *target,
 		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
 				SVE_PT_FPSIMD_OFFSET);
 		clear_tsk_thread_flag(target, TIF_SVE);
-		if (type == ARM64_VEC_SME)
-			fpsimd_force_sync_to_sve(target);
+		target->thread.fp_type = FP_STATE_FPSIMD;
 		goto out;
 	}
 
@@ -931,6 +930,7 @@ static int sve_set_common(struct task_struct *target,
 	if (!target->thread.sve_state) {
 		ret = -ENOMEM;
 		clear_tsk_thread_flag(target, TIF_SVE);
+		target->thread.fp_type = FP_STATE_FPSIMD;
 		goto out;
 	}
 
@@ -942,6 +942,7 @@ static int sve_set_common(struct task_struct *target,
 	 */
 	fpsimd_sync_to_sve(target);
 	set_tsk_thread_flag(target, TIF_SVE);
+	target->thread.fp_type = FP_STATE_SVE;
 
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 	start = SVE_PT_SVE_OFFSET;
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index d56e170e1ca7..830be01af32d 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -144,7 +144,7 @@ static int init_sdei_scs(void)
 	int cpu;
 	int err = 0;
 
-	if (!IS_ENABLED(CONFIG_SHADOW_CALL_STACK))
+	if (!scs_is_enabled())
 		return 0;
 
 	for_each_possible_cpu(cpu) {
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index fea3223704b6..12cfe9d0d3fa 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -30,6 +30,7 @@
 #include <linux/efi.h>
 #include <linux/psci.h>
 #include <linux/sched/task.h>
+#include <linux/scs.h>
 #include <linux/mm.h>
 
 #include <asm/acpi.h>
@@ -42,6 +43,7 @@
 #include <asm/cpu_ops.h>
 #include <asm/kasan.h>
 #include <asm/numa.h>
+#include <asm/scs.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp_plat.h>
@@ -312,6 +314,8 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
 	jump_label_init();
 	parse_early_param();
 
+	dynamic_scs_init();
+
 	/*
 	 * Unmask asynchronous aborts and fiq after bringing up possible
 	 * earlycon. (Report possible System Errors once we can report this
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 9ad911f1647c..e0d09bf5b01b 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -207,6 +207,7 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
 	__get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
 
 	clear_thread_flag(TIF_SVE);
+	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	/* load the hardware registers from the fpsimd_state structure */
 	if (!err)
@@ -292,6 +293,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	if (sve.head.size <= sizeof(*user->sve)) {
 		clear_thread_flag(TIF_SVE);
 		current->thread.svcr &= ~SVCR_SM_MASK;
+		current->thread.fp_type = FP_STATE_FPSIMD;
 		goto fpsimd_only;
 	}
 
@@ -327,6 +329,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 		current->thread.svcr |= SVCR_SM_MASK;
 	else
 		set_thread_flag(TIF_SVE);
+	current->thread.fp_type = FP_STATE_SVE;
 
 fpsimd_only:
 	/* copy the FP and status/control registers */
@@ -932,9 +935,11 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		 * FPSIMD register state - flush the saved FPSIMD
 		 * register state in case it gets loaded.
 		 */
-		if (current->thread.svcr & SVCR_SM_MASK)
+		if (current->thread.svcr & SVCR_SM_MASK) {
 			memset(&current->thread.uw.fpsimd_state, 0,
 			       sizeof(current->thread.uw.fpsimd_state));
+			current->thread.fp_type = FP_STATE_FPSIMD;
+		}
 
 		current->thread.svcr &= ~(SVCR_ZA_MASK |
 					  SVCR_SM_MASK);
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 634279b3b03d..117e2c180f3c 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -23,8 +23,8 @@
  *
  * The regs must be on a stack currently owned by the calling task.
  */
-static inline void unwind_init_from_regs(struct unwind_state *state,
-					 struct pt_regs *regs)
+static __always_inline void unwind_init_from_regs(struct unwind_state *state,
+						  struct pt_regs *regs)
 {
 	unwind_init_common(state, current);
 
@@ -58,8 +58,8 @@ static __always_inline void unwind_init_from_caller(struct unwind_state *state)
  * duration of the unwind, or the unwind will be bogus. It is never valid to
  * call this for the current task.
  */
-static inline void unwind_init_from_task(struct unwind_state *state,
-					 struct task_struct *task)
+static __always_inline void unwind_init_from_task(struct unwind_state *state,
+						  struct task_struct *task)
 {
 	unwind_init_common(state, task);
 
@@ -186,7 +186,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 			: stackinfo_get_unknown();		\
 	})
 
-noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 			      void *cookie, struct task_struct *task,
 			      struct pt_regs *regs)
 {
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index 8b02d310838f..e7163f31f716 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -60,6 +60,8 @@ void notrace __cpu_suspend_exit(void)
 	 * PSTATE was not saved over suspend/resume, re-enable any detected
 	 * features that might not have been set correctly.
 	 */
+	if (cpus_have_const_cap(ARM64_HAS_DIT))
+		set_pstate_dit(1);
 	__uaccess_enable_hw_pan();
 
 	/*
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index d72e8f23422d..a5de47e3df2b 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -183,21 +183,12 @@ static inline void fp_user_discard(void)
 	if (!system_supports_sve())
 		return;
 
-	/*
-	 * If SME is not active then disable SVE, the registers will
-	 * be cleared when userspace next attempts to access them and
-	 * we do not need to track the SVE register state until then.
-	 */
-	clear_thread_flag(TIF_SVE);
+	if (test_thread_flag(TIF_SVE)) {
+		unsigned int sve_vq_minus_one;
 
-	/*
-	 * task_fpsimd_load() won't be called to update CPACR_EL1 in
-	 * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
-	 * happens if a context switch or kernel_neon_begin() or context
-	 * modification (sigreturn, ptrace) intervenes.
-	 * So, ensure that CPACR_EL1 is already correct for the fast-path case.
-	 */
-	sve_user_disable();
+		sve_vq_minus_one = sve_vq_from_vl(task_get_sve_vl(current)) - 1;
+		sve_flush_live(true, sve_vq_minus_one);
+	}
 }
 
 void do_el0_svc(struct pt_regs *regs)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 23d281ed7621..4c0caa589e12 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -373,51 +373,22 @@ void arm64_skip_faulting_instruction(struct pt_regs *regs, unsigned long size)
 		regs->pstate &= ~PSR_BTYPE_MASK;
 }
 
-static LIST_HEAD(undef_hook);
-static DEFINE_RAW_SPINLOCK(undef_lock);
-
-void register_undef_hook(struct undef_hook *hook)
+static int user_insn_read(struct pt_regs *regs, u32 *insnp)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_add(&hook->node, &undef_hook);
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-}
-
-void unregister_undef_hook(struct undef_hook *hook)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_del(&hook->node);
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-}
-
-static int call_undef_hook(struct pt_regs *regs)
-{
-	struct undef_hook *hook;
-	unsigned long flags;
 	u32 instr;
-	int (*fn)(struct pt_regs *regs, u32 instr) = NULL;
 	unsigned long pc = instruction_pointer(regs);
 
-	if (!user_mode(regs)) {
-		__le32 instr_le;
-		if (get_kernel_nofault(instr_le, (__le32 *)pc))
-			goto exit;
-		instr = le32_to_cpu(instr_le);
-	} else if (compat_thumb_mode(regs)) {
+	if (compat_thumb_mode(regs)) {
 		/* 16-bit Thumb instruction */
 		__le16 instr_le;
 		if (get_user(instr_le, (__le16 __user *)pc))
-			goto exit;
+			return -EFAULT;
 		instr = le16_to_cpu(instr_le);
 		if (aarch32_insn_is_wide(instr)) {
 			u32 instr2;
 
 			if (get_user(instr_le, (__le16 __user *)(pc + 2)))
-				goto exit;
+				return -EFAULT;
 			instr2 = le16_to_cpu(instr_le);
 			instr = (instr << 16) | instr2;
 		}
@@ -425,19 +396,12 @@ static int call_undef_hook(struct pt_regs *regs)
 		/* 32-bit ARM instruction */
 		__le32 instr_le;
 		if (get_user(instr_le, (__le32 __user *)pc))
-			goto exit;
+			return -EFAULT;
 		instr = le32_to_cpu(instr_le);
 	}
 
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_for_each_entry(hook, &undef_hook, node)
-		if ((instr & hook->instr_mask) == hook->instr_val &&
-			(regs->pstate & hook->pstate_mask) == hook->pstate_val)
-			fn = hook->fn;
-
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-exit:
-	return fn ? fn(regs, instr) : 1;
+	*insnp = instr;
+	return 0;
 }
 
 void force_signal_inject(int signal, int code, unsigned long address, unsigned long err)
@@ -486,21 +450,40 @@ void arm64_notify_segfault(unsigned long addr)
 	force_signal_inject(SIGSEGV, code, addr, 0);
 }
 
-void do_undefinstr(struct pt_regs *regs, unsigned long esr)
+void do_el0_undef(struct pt_regs *regs, unsigned long esr)
 {
+	u32 insn;
+
 	/* check for AArch32 breakpoint instructions */
 	if (!aarch32_break_handler(regs))
 		return;
 
-	if (call_undef_hook(regs) == 0)
+	if (user_insn_read(regs, &insn))
+		goto out_err;
+
+	if (try_emulate_mrs(regs, insn))
 		return;
 
-	if (!user_mode(regs))
-		die("Oops - Undefined instruction", regs, esr);
+	if (try_emulate_armv8_deprecated(regs, insn))
+		return;
 
+out_err:
 	force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
 }
-NOKPROBE_SYMBOL(do_undefinstr);
+
+void do_el1_undef(struct pt_regs *regs, unsigned long esr)
+{
+	u32 insn;
+
+	if (aarch64_insn_read((void *)regs->pc, &insn))
+		goto out_err;
+
+	if (try_emulate_el1_ssbs(regs, insn))
+		return;
+
+out_err:
+	die("Oops - Undefined instruction", regs, esr);
+}
 
 void do_el0_bti(struct pt_regs *regs)
 {
@@ -511,7 +494,6 @@ void do_el1_bti(struct pt_regs *regs, unsigned long esr)
 {
 	die("Oops - BTI", regs, esr);
 }
-NOKPROBE_SYMBOL(do_el1_bti);
 
 void do_el0_fpac(struct pt_regs *regs, unsigned long esr)
 {
@@ -526,7 +508,6 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr)
 	 */
 	die("Oops - FPAC", regs, esr);
 }
-NOKPROBE_SYMBOL(do_el1_fpac)
 
 #define __user_cache_maint(insn, address, res)			\
 	if (address >= TASK_SIZE_MAX) {				\
@@ -748,7 +729,7 @@ static const struct sys64_hook cp15_64_hooks[] = {
 	{},
 };
 
-void do_cp15instr(unsigned long esr, struct pt_regs *regs)
+void do_el0_cp15(unsigned long esr, struct pt_regs *regs)
 {
 	const struct sys64_hook *hook, *hook_base;
 
@@ -769,7 +750,7 @@ void do_cp15instr(unsigned long esr, struct pt_regs *regs)
 		hook_base = cp15_64_hooks;
 		break;
 	default:
-		do_undefinstr(regs, esr);
+		do_el0_undef(regs, esr);
 		return;
 	}
 
@@ -784,12 +765,11 @@ void do_cp15instr(unsigned long esr, struct pt_regs *regs)
 	 * EL0. Fall back to our usual undefined instruction handler
 	 * so that we handle these consistently.
 	 */
-	do_undefinstr(regs, esr);
+	do_el0_undef(regs, esr);
 }
-NOKPROBE_SYMBOL(do_cp15instr);
 #endif
 
-void do_sysinstr(unsigned long esr, struct pt_regs *regs)
+void do_el0_sys(unsigned long esr, struct pt_regs *regs)
 {
 	const struct sys64_hook *hook;
 
@@ -804,9 +784,8 @@ void do_sysinstr(unsigned long esr, struct pt_regs *regs)
 	 * back to our usual undefined instruction handler so that we handle
 	 * these consistently.
 	 */
-	do_undefinstr(regs, esr);
+	do_el0_undef(regs, esr);
 }
-NOKPROBE_SYMBOL(do_sysinstr);
 
 static const char *esr_class_str[] = {
 	[0 ... ESR_ELx_EC_MAX]		= "UNRECOGNIZED EC",
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 99ae81ab91a7..e59a32aa0c49 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -151,28 +151,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 	mmap_read_unlock(mm);
 	return 0;
 }
-
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_mm == current->mm))
-		return current->nsproxy->time_ns->vvar_page;
-
-	/*
-	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
-	 * through interfaces like /proc/$pid/mem or
-	 * process_vm_{readv,writev}() as long as there's no .access()
-	 * in special_mapping_vmops.
-	 * For more details check_vma_flags() and __access_remote_vm()
-	 */
-	WARN(1, "vvar_page accessed remotely");
-
-	return NULL;
-}
-#else
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	return NULL;
-}
 #endif
 
 static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 45131e354e27..4c13dafc98b8 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -121,6 +121,17 @@ jiffies = jiffies_64;
 #define TRAMP_TEXT
 #endif
 
+#ifdef CONFIG_UNWIND_TABLES
+#define UNWIND_DATA_SECTIONS				\
+	.eh_frame : {					\
+		__eh_frame_start = .;			\
+		*(.eh_frame)				\
+		__eh_frame_end = .;			\
+	}
+#else
+#define UNWIND_DATA_SECTIONS
+#endif
+
 /*
  * The size of the PE/COFF section that covers the kernel image, which
  * runs from _stext to _edata, must be a round multiple of the PE/COFF
@@ -231,6 +242,8 @@ SECTIONS
 		__alt_instructions_end = .;
 	}
 
+	UNWIND_DATA_SECTIONS
+
 	. = ALIGN(SEGMENT_ALIGN);
 	__inittext_end = .;
 	__initdata_begin = .;
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index ec8e4494873d..02dd7e9ebd39 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -75,11 +75,12 @@ int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
 void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
 {
 	BUG_ON(!current->mm);
-	BUG_ON(test_thread_flag(TIF_SVE));
 
 	if (!system_supports_fpsimd())
 		return;
 
+	fpsimd_kvm_prepare();
+
 	vcpu->arch.fp_state = FP_STATE_HOST_OWNED;
 
 	vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
@@ -129,20 +130,31 @@ void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu)
  */
 void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
 {
+	struct cpu_fp_state fp_state;
+
 	WARN_ON_ONCE(!irqs_disabled());
 
 	if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) {
+
 		/*
 		 * Currently we do not support SME guests so SVCR is
 		 * always 0 and we just need a variable to point to.
 		 */
-		fpsimd_bind_state_to_cpu(&vcpu->arch.ctxt.fp_regs,
-					 vcpu->arch.sve_state,
-					 vcpu->arch.sve_max_vl,
-					 NULL, 0, &vcpu->arch.svcr);
+		fp_state.st = &vcpu->arch.ctxt.fp_regs;
+		fp_state.sve_state = vcpu->arch.sve_state;
+		fp_state.sve_vl = vcpu->arch.sve_max_vl;
+		fp_state.za_state = NULL;
+		fp_state.svcr = &vcpu->arch.svcr;
+		fp_state.fp_type = &vcpu->arch.fp_type;
+
+		if (vcpu_has_sve(vcpu))
+			fp_state.to_save = FP_STATE_SVE;
+		else
+			fp_state.to_save = FP_STATE_FPSIMD;
+
+		fpsimd_bind_state_to_cpu(&fp_state);
 
 		clear_thread_flag(TIF_FOREIGN_FPSTATE);
-		update_thread_flag(TIF_SVE, vcpu_has_sve(vcpu));
 	}
 }
 
@@ -199,7 +211,5 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 			sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
 	}
 
-	update_thread_flag(TIF_SVE, 0);
-
 	local_irq_restore(flags);
 }
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index be0a2bc3e20d..530347cdebe3 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -96,6 +96,7 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS) $(CC_FLAGS_CFI)
 # when profile optimization is applied. gen-hyprel does not support SHT_REL and
 # causes a build failure. Remove profile optimization flags.
 KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
 
 # KVM nVHE code is run at a different exception code with a different map, so
 # compiler instrumentation that inserts callbacks or checks into the code may
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index f4a7c5abcbca..608e4f25161d 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1121,8 +1121,8 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r
 	case SYS_ID_DFR0_EL1:
 		/* Limit guests to PMUv3 for ARMv8.4 */
 		val = cpuid_feature_cap_perfmon_field(val,
-						      ID_DFR0_PERFMON_SHIFT,
-						      kvm_vcpu_has_pmu(vcpu) ? ID_DFR0_PERFMON_8_4 : 0);
+						      ID_DFR0_EL1_PerfMon_SHIFT,
+						      kvm_vcpu_has_pmu(vcpu) ? ID_DFR0_EL1_PerfMon_PMUv3p4 : 0);
 		break;
 	}
 
diff --git a/arch/arm64/lib/insn.c b/arch/arm64/lib/insn.c
index 49e972beeac7..924934cb85ee 100644
--- a/arch/arm64/lib/insn.c
+++ b/arch/arm64/lib/insn.c
@@ -20,91 +20,6 @@
 #define AARCH64_INSN_N_BIT	BIT(22)
 #define AARCH64_INSN_LSL_12	BIT(22)
 
-static const int aarch64_insn_encoding_class[] = {
-	AARCH64_INSN_CLS_UNKNOWN,
-	AARCH64_INSN_CLS_UNKNOWN,
-	AARCH64_INSN_CLS_SVE,
-	AARCH64_INSN_CLS_UNKNOWN,
-	AARCH64_INSN_CLS_LDST,
-	AARCH64_INSN_CLS_DP_REG,
-	AARCH64_INSN_CLS_LDST,
-	AARCH64_INSN_CLS_DP_FPSIMD,
-	AARCH64_INSN_CLS_DP_IMM,
-	AARCH64_INSN_CLS_DP_IMM,
-	AARCH64_INSN_CLS_BR_SYS,
-	AARCH64_INSN_CLS_BR_SYS,
-	AARCH64_INSN_CLS_LDST,
-	AARCH64_INSN_CLS_DP_REG,
-	AARCH64_INSN_CLS_LDST,
-	AARCH64_INSN_CLS_DP_FPSIMD,
-};
-
-enum aarch64_insn_encoding_class __kprobes aarch64_get_insn_class(u32 insn)
-{
-	return aarch64_insn_encoding_class[(insn >> 25) & 0xf];
-}
-
-bool __kprobes aarch64_insn_is_steppable_hint(u32 insn)
-{
-	if (!aarch64_insn_is_hint(insn))
-		return false;
-
-	switch (insn & 0xFE0) {
-	case AARCH64_INSN_HINT_XPACLRI:
-	case AARCH64_INSN_HINT_PACIA_1716:
-	case AARCH64_INSN_HINT_PACIB_1716:
-	case AARCH64_INSN_HINT_PACIAZ:
-	case AARCH64_INSN_HINT_PACIASP:
-	case AARCH64_INSN_HINT_PACIBZ:
-	case AARCH64_INSN_HINT_PACIBSP:
-	case AARCH64_INSN_HINT_BTI:
-	case AARCH64_INSN_HINT_BTIC:
-	case AARCH64_INSN_HINT_BTIJ:
-	case AARCH64_INSN_HINT_BTIJC:
-	case AARCH64_INSN_HINT_NOP:
-		return true;
-	default:
-		return false;
-	}
-}
-
-bool aarch64_insn_is_branch_imm(u32 insn)
-{
-	return (aarch64_insn_is_b(insn) || aarch64_insn_is_bl(insn) ||
-		aarch64_insn_is_tbz(insn) || aarch64_insn_is_tbnz(insn) ||
-		aarch64_insn_is_cbz(insn) || aarch64_insn_is_cbnz(insn) ||
-		aarch64_insn_is_bcond(insn));
-}
-
-bool __kprobes aarch64_insn_uses_literal(u32 insn)
-{
-	/* ldr/ldrsw (literal), prfm */
-
-	return aarch64_insn_is_ldr_lit(insn) ||
-		aarch64_insn_is_ldrsw_lit(insn) ||
-		aarch64_insn_is_adr_adrp(insn) ||
-		aarch64_insn_is_prfm_lit(insn);
-}
-
-bool __kprobes aarch64_insn_is_branch(u32 insn)
-{
-	/* b, bl, cb*, tb*, ret*, b.cond, br*, blr* */
-
-	return aarch64_insn_is_b(insn) ||
-		aarch64_insn_is_bl(insn) ||
-		aarch64_insn_is_cbz(insn) ||
-		aarch64_insn_is_cbnz(insn) ||
-		aarch64_insn_is_tbz(insn) ||
-		aarch64_insn_is_tbnz(insn) ||
-		aarch64_insn_is_ret(insn) ||
-		aarch64_insn_is_ret_auth(insn) ||
-		aarch64_insn_is_br(insn) ||
-		aarch64_insn_is_br_auth(insn) ||
-		aarch64_insn_is_blr(insn) ||
-		aarch64_insn_is_blr_auth(insn) ||
-		aarch64_insn_is_bcond(insn);
-}
-
 static int __kprobes aarch64_get_imm_shift_mask(enum aarch64_insn_imm_type type,
 						u32 *maskp, int *shiftp)
 {
@@ -435,16 +350,6 @@ u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr,
 					     offset >> 2);
 }
 
-u32 __kprobes aarch64_insn_gen_hint(enum aarch64_insn_hint_cr_op op)
-{
-	return aarch64_insn_get_hint_value() | op;
-}
-
-u32 __kprobes aarch64_insn_gen_nop(void)
-{
-	return aarch64_insn_gen_hint(AARCH64_INSN_HINT_NOP);
-}
-
 u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg,
 				enum aarch64_insn_branch_type type)
 {
@@ -816,76 +721,6 @@ u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
 }
 #endif
 
-static u32 aarch64_insn_encode_prfm_imm(enum aarch64_insn_prfm_type type,
-					enum aarch64_insn_prfm_target target,
-					enum aarch64_insn_prfm_policy policy,
-					u32 insn)
-{
-	u32 imm_type = 0, imm_target = 0, imm_policy = 0;
-
-	switch (type) {
-	case AARCH64_INSN_PRFM_TYPE_PLD:
-		break;
-	case AARCH64_INSN_PRFM_TYPE_PLI:
-		imm_type = BIT(0);
-		break;
-	case AARCH64_INSN_PRFM_TYPE_PST:
-		imm_type = BIT(1);
-		break;
-	default:
-		pr_err("%s: unknown prfm type encoding %d\n", __func__, type);
-		return AARCH64_BREAK_FAULT;
-	}
-
-	switch (target) {
-	case AARCH64_INSN_PRFM_TARGET_L1:
-		break;
-	case AARCH64_INSN_PRFM_TARGET_L2:
-		imm_target = BIT(0);
-		break;
-	case AARCH64_INSN_PRFM_TARGET_L3:
-		imm_target = BIT(1);
-		break;
-	default:
-		pr_err("%s: unknown prfm target encoding %d\n", __func__, target);
-		return AARCH64_BREAK_FAULT;
-	}
-
-	switch (policy) {
-	case AARCH64_INSN_PRFM_POLICY_KEEP:
-		break;
-	case AARCH64_INSN_PRFM_POLICY_STRM:
-		imm_policy = BIT(0);
-		break;
-	default:
-		pr_err("%s: unknown prfm policy encoding %d\n", __func__, policy);
-		return AARCH64_BREAK_FAULT;
-	}
-
-	/* In this case, imm5 is encoded into Rt field. */
-	insn &= ~GENMASK(4, 0);
-	insn |= imm_policy | (imm_target << 1) | (imm_type << 3);
-
-	return insn;
-}
-
-u32 aarch64_insn_gen_prefetch(enum aarch64_insn_register base,
-			      enum aarch64_insn_prfm_type type,
-			      enum aarch64_insn_prfm_target target,
-			      enum aarch64_insn_prfm_policy policy)
-{
-	u32 insn = aarch64_insn_get_prfm_value();
-
-	insn = aarch64_insn_encode_ldst_size(AARCH64_INSN_SIZE_64, insn);
-
-	insn = aarch64_insn_encode_prfm_imm(type, target, policy, insn);
-
-	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
-					    base);
-
-	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_12, insn, 0);
-}
-
 u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
 				 enum aarch64_insn_register src,
 				 int imm, enum aarch64_insn_variant variant,
diff --git a/arch/arm64/lib/mte.S b/arch/arm64/lib/mte.S
index 1b7c93ae7e63..5018ac03b6bf 100644
--- a/arch/arm64/lib/mte.S
+++ b/arch/arm64/lib/mte.S
@@ -18,7 +18,7 @@
  */
 	.macro	multitag_transfer_size, reg, tmp
 	mrs_s	\reg, SYS_GMID_EL1
-	ubfx	\reg, \reg, #GMID_EL1_BS_SHIFT, #GMID_EL1_BS_SIZE
+	ubfx	\reg, \reg, #GMID_EL1_BS_SHIFT, #GMID_EL1_BS_WIDTH
 	mov	\tmp, #4
 	lsl	\reg, \tmp, \reg
 	.endm
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 3cb101e8cb29..5240f6acad64 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -36,7 +36,22 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 {
 	unsigned long start = (unsigned long)page_address(page);
 
-	dcache_clean_poc(start, start + size);
+	/*
+	 * The architecture only requires a clean to the PoC here in order to
+	 * meet the requirements of the DMA API. However, some vendors (i.e.
+	 * Qualcomm) abuse the DMA API for transferring buffers from the
+	 * non-secure to the secure world, resetting the system if a non-secure
+	 * access shows up after the buffer has been transferred:
+	 *
+	 * https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org
+	 *
+	 * Using clean+invalidate appears to make this issue less likely, but
+	 * the drivers themselves still need fixing as the CPU could issue a
+	 * speculative read from the buffer via the linear mapping irrespective
+	 * of the cache maintenance we use. Once the drivers are fixed, we can
+	 * relax this to a clean operation.
+	 */
+	dcache_clean_inval_poc(start, start + size);
 }
 
 #ifdef CONFIG_IOMMU_DMA
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 3e9cf9826417..74f76514a48d 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -30,7 +30,6 @@
 #include <asm/bug.h>
 #include <asm/cmpxchg.h>
 #include <asm/cpufeature.h>
-#include <asm/efi.h>
 #include <asm/exception.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
@@ -354,6 +353,11 @@ static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
 	return false;
 }
 
+static bool is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
 static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 			      struct pt_regs *regs)
 {
@@ -386,15 +390,13 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 	} else if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
 	} else {
-		if (kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
+		if (is_translation_fault(esr) &&
+		    kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
 			return;
 
 		msg = "paging request";
 	}
 
-	if (efi_runtime_fixup_exception(regs, msg))
-		return;
-
 	die_kernel_fault(msg, addr, esr, regs);
 }
 
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 35e9a468d13e..cd8d96e1fa1a 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -559,3 +559,24 @@ bool __init arch_hugetlb_valid_size(unsigned long size)
 {
 	return __hugetlb_valid_size(size);
 }
+
+pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (IS_ENABLED(CONFIG_ARM64_WORKAROUND_2645198) &&
+	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+		/*
+		 * Break-before-make (BBM) is required for all user space mappings
+		 * when the permission changes from executable to non-executable
+		 * in cases where cpu is affected with errata #2645198.
+		 */
+		if (pte_user_exec(READ_ONCE(*ptep)))
+			return huge_ptep_clear_flush(vma, addr, ptep);
+	}
+	return huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+}
+
+void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+				  pte_t old_pte, pte_t pte)
+{
+	set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 4b4651ee47f2..58a0bb2c17f1 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -96,6 +96,8 @@ phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
 #define CRASH_ADDR_LOW_MAX		arm64_dma_phys_limit
 #define CRASH_ADDR_HIGH_MAX		(PHYS_MASK + 1)
 
+#define DEFAULT_CRASH_KERNEL_LOW_SIZE	(128UL << 20)
+
 static int __init reserve_crashkernel_low(unsigned long long low_size)
 {
 	unsigned long long low_base;
@@ -130,6 +132,7 @@ static void __init reserve_crashkernel(void)
 	unsigned long long crash_max = CRASH_ADDR_LOW_MAX;
 	char *cmdline = boot_command_line;
 	int ret;
+	bool fixed_base = false;
 
 	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
 		return;
@@ -147,7 +150,9 @@ static void __init reserve_crashkernel(void)
 		 * is not allowed.
 		 */
 		ret = parse_crashkernel_low(cmdline, 0, &crash_low_size, &crash_base);
-		if (ret && (ret != -ENOENT))
+		if (ret == -ENOENT)
+			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
+		else if (ret)
 			return;
 
 		crash_max = CRASH_ADDR_HIGH_MAX;
@@ -159,18 +164,32 @@ static void __init reserve_crashkernel(void)
 	crash_size = PAGE_ALIGN(crash_size);
 
 	/* User specifies base address explicitly. */
-	if (crash_base)
+	if (crash_base) {
+		fixed_base = true;
 		crash_max = crash_base + crash_size;
+	}
 
+retry:
 	crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN,
 					       crash_base, crash_max);
 	if (!crash_base) {
+		/*
+		 * If the first attempt was for low memory, fall back to
+		 * high memory, the minimum required low memory will be
+		 * reserved later.
+		 */
+		if (!fixed_base && (crash_max == CRASH_ADDR_LOW_MAX)) {
+			crash_max = CRASH_ADDR_HIGH_MAX;
+			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
+			goto retry;
+		}
+
 		pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
 			crash_size);
 		return;
 	}
 
-	if ((crash_base >= CRASH_ADDR_LOW_MAX) &&
+	if ((crash_base > CRASH_ADDR_LOW_MAX - crash_low_size) &&
 	     crash_low_size && reserve_crashkernel_low(crash_low_size)) {
 		memblock_phys_free(crash_base, crash_size);
 		return;
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 9a7c38965154..2368e4daa23d 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1196,7 +1196,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 
 	WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END));
 
-	if (!ARM64_KERNEL_USES_PMD_MAPS)
+	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES))
 		return vmemmap_populate_basepages(start, end, node, altmap);
 
 	do {
@@ -1702,3 +1702,24 @@ static int __init prevent_bootmem_remove_init(void)
 }
 early_initcall(prevent_bootmem_remove_init);
 #endif
+
+pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (IS_ENABLED(CONFIG_ARM64_WORKAROUND_2645198) &&
+	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+		/*
+		 * Break-before-make (BBM) is required for all user space mappings
+		 * when the permission changes from executable to non-executable
+		 * in cases where cpu is affected with errata #2645198.
+		 */
+		if (pte_user_exec(READ_ONCE(*ptep)))
+			return ptep_clear_flush(vma, addr, ptep);
+	}
+	return ptep_get_and_clear(vma->vm_mm, addr, ptep);
+}
+
+void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+			     pte_t old_pte, pte_t pte)
+{
+	set_pte_at(vma->vm_mm, addr, ptep, pte);
+}
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index b9ecbbae1e1a..066fa60b93d2 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -189,16 +189,12 @@ SYM_FUNC_END(cpu_do_resume)
  * called by anything else. It can only be executed from a TTBR0 mapping.
  */
 SYM_TYPED_FUNC_START(idmap_cpu_replace_ttbr1)
-	save_and_disable_daif flags=x2
-
 	__idmap_cpu_set_reserved_ttbr1 x1, x3
 
 	offset_ttbr1 x0, x3
 	msr	ttbr1_el1, x0
 	isb
 
-	restore_daif x2
-
 	ret
 SYM_FUNC_END(idmap_cpu_replace_ttbr1)
 	.popsection
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index f1c0347ec31a..dfeb2c51e257 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -20,6 +20,7 @@ HAS_CNP
 HAS_CRC32
 HAS_DCPODP
 HAS_DCPOP
+HAS_DIT
 HAS_E0PD
 HAS_ECV
 HAS_EPAN
@@ -70,6 +71,7 @@ WORKAROUND_2038923
 WORKAROUND_2064142
 WORKAROUND_2077057
 WORKAROUND_2457168
+WORKAROUND_2645198
 WORKAROUND_2658417
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
index db461921d256..c350164a3955 100755
--- a/arch/arm64/tools/gen-sysreg.awk
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -33,7 +33,7 @@ function expect_fields(nf) {
 # Print a CPP macro definition, padded with spaces so that the macro bodies
 # line up in a column
 function define(name, val) {
-	printf "%-48s%s\n", "#define " name, val
+	printf "%-56s%s\n", "#define " name, val
 }
 
 # Print standard BITMASK/SHIFT/WIDTH CPP definitions for a field
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index 384757a7eda9..184e58fd5631 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -46,6 +46,760 @@
 # feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration
 # item ACCDATA) though it may be more taseful to do something else.
 
+Sysreg ID_PFR0_EL1	3	0	0	1	0
+Res0	63:32
+Enum	31:28	RAS
+	0b0000	NI
+	0b0001	RAS
+	0b0010	RASv1p1
+EndEnum
+Enum	27:24	DIT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	AMU
+	0b0000	NI
+	0b0001	AMUv1
+	0b0010	AMUv1p1
+EndEnum
+Enum	19:16	CSV2
+	0b0000	UNDISCLOSED
+	0b0001	IMP
+	0b0010	CSV2p1
+EndEnum
+Enum	15:12	State3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	State2
+	0b0000	NI
+	0b0001	NO_CV
+	0b0010	CV
+EndEnum
+Enum	7:4	State1
+	0b0000	NI
+	0b0001	THUMB
+	0b0010	THUMB2
+EndEnum
+Enum	3:0	State0
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_PFR1_EL1	3	0	0	1	1
+Res0	63:32
+Enum	31:28	GIC
+	0b0000	NI
+	0b0001	GICv3
+	0b0010	GICv4p1
+EndEnum
+Enum	27:24	Virt_frac
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	Sec_frac
+	0b0000	NI
+	0b0001	WALK_DISABLE
+	0b0010	SECURE_MEMORY
+EndEnum
+Enum	19:16	GenTimer
+	0b0000	NI
+	0b0001	IMP
+	0b0010	ECV
+EndEnum
+Enum	15:12	Virtualization
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	MProgMod
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	Security
+	0b0000	NI
+	0b0001	EL3
+	0b0001	NSACR_RFR
+EndEnum
+Enum	3:0	ProgMod
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_DFR0_EL1	3	0	0	1	2
+Res0	63:32
+Enum	31:28	TraceFilt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	PerfMon
+	0b0000	NI
+	0b0001	PMUv1
+	0b0010	PMUv2
+	0b0011	PMUv3
+	0b0100	PMUv3p1
+	0b0101	PMUv3p4
+	0b0110	PMUv3p5
+	0b0111	PMUv3p7
+	0b1000	PMUv3p8
+	0b1111	IMPDEF
+EndEnum
+Enum	23:20	MProfDbg
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	MMapTrc
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	CopTrc
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	MMapDbg
+	0b0000	NI
+	0b0100	Armv7
+	0b0101	Armv7p1
+EndEnum
+Field	7:4	CopSDbg
+Enum	3:0	CopDbg
+	0b0000	NI
+	0b0010	Armv6
+	0b0011	Armv6p1
+	0b0100	Armv7
+	0b0101	Armv7p1
+	0b0110	Armv8
+	0b0111	VHE
+	0b1000	Debugv8p2
+	0b1001	Debugv8p4
+	0b1010	Debugv8p8
+EndEnum
+EndSysreg
+
+Sysreg ID_AFR0_EL1	3	0	0	1	3
+Res0	63:16
+Field	15:12	IMPDEF3
+Field	11:8	IMPDEF2
+Field	7:4	IMPDEF1
+Field	3:0	IMPDEF0
+EndSysreg
+
+Sysreg ID_MMFR0_EL1	3	0	0	1	4
+Res0	63:32
+Enum	31:28	InnerShr
+	0b0000	NC
+	0b0001	HW
+	0b1111	IGNORED
+EndEnum
+Enum	27:24	FCSE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	AuxReg
+	0b0000	NI
+	0b0001	ACTLR
+	0b0010	AIFSR
+EndEnum
+Enum	19:16	TCM
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	TCM
+	0b0011	TCM_DMA
+EndEnum
+Enum	15:12	ShareLvl
+	0b0000	ONE
+	0b0001	TWO
+EndEnum
+Enum	11:8	OuterShr
+	0b0000	NC
+	0b0001	HW
+	0b1111	IGNORED
+EndEnum
+Enum	7:4	PMSA
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	PMSAv6
+	0b0011	PMSAv7
+EndEnum
+Enum	3:0	VMSA
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	VMSAv6
+	0b0011	VMSAv7
+	0b0100	VMSAv7_PXN
+	0b0101	VMSAv7_LONG
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR1_EL1	3	0	0	1	5
+Res0	63:32
+Enum	31:28	BPred
+	0b0000	NI
+	0b0001	BP_SW_MANGED
+	0b0010	BP_ASID_AWARE
+	0b0011	BP_NOSNOOP
+	0b0100	BP_INVISIBLE
+EndEnum
+Enum	27:24	L1TstCln
+	0b0000	NI
+	0b0001	NOINVALIDATE
+	0b0010	INVALIDATE
+EndEnum
+Enum	23:20	L1Uni
+	0b0000	NI
+	0b0001	INVALIDATE
+	0b0010	CLEAN_AND_INVALIDATE
+EndEnum
+Enum	19:16	L1Hvd
+	0b0000	NI
+	0b0001	INVALIDATE_ISIDE_ONLY
+	0b0010	INVALIDATE
+	0b0011	CLEAN_AND_INVALIDATE
+EndEnum
+Enum	15:12	L1UniSW
+	0b0000	NI
+	0b0001	CLEAN
+	0b0010	CLEAN_AND_INVALIDATE
+	0b0011	INVALIDATE
+EndEnum
+Enum	11:8	L1HvdSW
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_DSIDE_ONLY
+	0b0011	INVALIDATE
+EndEnum
+Enum	7:4	L1UniVA
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_BP
+EndEnum
+Enum	3:0	L1HvdVA
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_BP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR2_EL1	3	0	0	1	6
+Res0	63:32
+Enum	31:28	HWAccFlg
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	WFIStall
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	MemBarr
+	0b0000	NI
+	0b0001	DSB_ONLY
+	0b0010	IMP
+EndEnum
+Enum	19:16	UniTLB
+	0b0000	NI
+	0b0001	BY_VA
+	0b0010	BY_MATCH_ASID
+	0b0011	BY_ALL_ASID
+	0b0100	OTHER_TLBS
+	0b0101	BROADCAST
+	0b0110	BY_IPA
+EndEnum
+Enum	15:12	HvdTLB
+	0b0000	NI
+EndEnum
+Enum	11:8	L1HvdRng
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	L1HvdBG
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	L1HvdFG
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR3_EL1	3	0	0	1	7
+Res0	63:32
+Enum	31:28	Supersec
+	0b0000	IMP
+	0b1111	NI
+EndEnum
+Enum	27:24	CMemSz
+	0b0000	4GB
+	0b0001	64GB
+	0b0010	1TB
+EndEnum
+Enum	23:20	CohWalk
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	PAN
+	0b0000	NI
+	0b0001	PAN
+	0b0010	PAN2
+EndEnum
+Enum	15:12	MaintBcst
+	0b0000	NI
+	0b0001	NO_TLB
+	0b0010	ALL
+EndEnum
+Enum	11:8	BPMaint
+	0b0000	NI
+	0b0001	ALL
+	0b0010	BY_VA
+EndEnum
+Enum	7:4	CMaintSW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	CMaintVA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR0_EL1	3	0	0	2	0
+Res0	63:28
+Enum	27:24	Divide
+	0b0000	NI
+	0b0001	xDIV_T32
+	0b0010	xDIV_A32
+EndEnum
+Enum	23:20	Debug
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	Coproc
+	0b0000	NI
+	0b0001	MRC
+	0b0010	MRC2
+	0b0011	MRRC
+	0b0100	MRRC2
+EndEnum
+Enum	15:12	CmpBranch
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	BitField
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	BitCount
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	Swap
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR1_EL1	3	0	0	2	1
+Res0	63:32
+Enum	31:28	Jazelle
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	Interwork
+	0b0000	NI
+	0b0001	BX
+	0b0010	BLX
+	0b0011	A32_BX
+EndEnum
+Enum	23:20	Immediate
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	IfThen
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	Extend
+	0b0000	NI
+	0b0001	SXTB
+	0b0010	SXTB16
+EndEnum
+Enum	11:8	Except_AR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	Except
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	Endian
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR2_EL1	3	0	0	2	2
+Res0	63:32
+Enum	31:28	Reversal
+	0b0000	NI
+	0b0001	REV
+	0b0010	RBIT
+EndEnum
+Enum	27:24	PSR_AR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	MultU
+	0b0000	NI
+	0b0001	UMULL
+	0b0010	UMAAL
+EndEnum
+Enum	19:16	MultS
+	0b0000	NI
+	0b0001	SMULL
+	0b0010	SMLABB
+	0b0011	SMLAD
+EndEnum
+Enum	15:12	Mult
+	0b0000	NI
+	0b0001	MLA
+	0b0010	MLS
+EndEnum
+Enum	11:8	MultiAccessInt
+	0b0000	NI
+	0b0001	RESTARTABLE
+	0b0010	CONTINUABLE
+EndEnum
+Enum	7:4	MemHint
+	0b0000	NI
+	0b0001	PLD
+	0b0010	PLD2
+	0b0011	PLI
+	0b0100	PLDW
+EndEnum
+Enum	3:0	LoadStore
+	0b0000	NI
+	0b0001	DOUBLE
+	0b0010	ACQUIRE
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR3_EL1	3	0	0	2	3
+Res0	63:32
+Enum	31:28	T32EE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	TrueNOP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	T32Copy
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	TabBranch
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SynchPrim
+	0b0000	NI
+	0b0001	EXCLUSIVE
+	0b0010	DOUBLE
+EndEnum
+Enum	11:8	SVC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	SIMD
+	0b0000	NI
+	0b0001	SSAT
+	0b0011	PKHBT
+EndEnum
+Enum	3:0	Saturate
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR4_EL1	3	0	0	2	4
+Res0	63:32
+Enum	31:28	SWP_frac
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	PSR_M
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	SynchPrim_frac
+	0b0000	NI
+	0b0011	IMP
+EndEnum
+Enum	19:16	Barrier
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SMC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	Writeback
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	WithShifts
+	0b0000	NI
+	0b0001	LSL3
+	0b0011	LS
+	0b0100	REG
+EndEnum
+Enum	3:0	Unpriv
+	0b0000	NI
+	0b0001	REG_BYTE
+	0b0010	SIGNED_HALFWORD
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR5_EL1	3	0	0	2	5
+Res0	63:32
+Enum	31:28	VCMA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	RDM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	23:20
+Enum	19:16	CRC32
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SHA2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	SHA1
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	AES
+	0b0000	NI
+	0b0001	IMP
+	0b0010  VMULL
+EndEnum
+Enum	3:0	SEVL
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR6_EL1	3	0	0	2	7
+Res0	63:28
+Enum	27:24	I8MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	BF16
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	SPECRES
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	FHM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	DP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	JSCVT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR4_EL1	3	0	0	2	6
+Res0	63:32
+Enum	31:28	EVT
+	0b0000	NI
+	0b0001	NO_TLBIS
+	0b0010	TLBIS
+EndEnum
+Enum	27:24	CCIDX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	LSM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	HPDS
+	0b0000	NI
+	0b0001	AA32HPD
+	0b0010	HPDS2
+EndEnum
+Enum	15:12	CnP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	XNX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	AC2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	SpecSEI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg MVFR0_EL1	3	0	0	3	0
+Res0	63:32
+Enum	31:28	FPRound
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	FPShVec
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	FPSqrt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	FPDivide
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	FPTrap
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	FPDP
+	0b0000	NI
+	0b0001	VFPv2
+	0b0001	VFPv3
+EndEnum
+Enum	7:4	FPSP
+	0b0000	NI
+	0b0001	VFPv2
+	0b0001	VFPv3
+EndEnum
+Enum	3:0	SIMDReg
+	0b0000	NI
+	0b0001	IMP_16x64
+	0b0001	IMP_32x64
+EndEnum
+EndSysreg
+
+Sysreg MVFR1_EL1	3	0	0	3	1
+Res0	63:32
+Enum	31:28	SIMDFMAC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	FPHP
+	0b0000	NI
+	0b0001	FPHP
+	0b0010	FPHP_CONV
+	0b0011	FP16
+EndEnum
+Enum	23:20	SIMDHP
+	0b0000	NI
+	0b0001	SIMDHP
+	0b0001	SIMDHP_FLOAT
+EndEnum
+Enum	19:16	SIMDSP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SIMDInt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	SIMDLS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	FPDNaN
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	FPFtZ
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg MVFR2_EL1	3	0	0	3	2
+Res0	63:8
+Enum	7:4	FPMisc
+	0b0000	NI
+	0b0001	FP
+	0b0010	FP_DIRECTED_ROUNDING
+	0b0011	FP_ROUNDING
+	0b0100	FP_MAX_MIN
+EndEnum
+Enum	3:0	SIMDMisc
+	0b0000	NI
+	0b0001	SIMD_DIRECTED_ROUNDING
+	0b0010	SIMD_ROUNDING
+	0b0011	SIMD_MAX_MIN
+EndEnum
+EndSysreg
+
+Sysreg ID_PFR2_EL1	3	0	0	3	4
+Res0	63:12
+Enum	11:8	RAS_frac
+	0b0000	NI
+	0b0001	RASv1p1
+EndEnum
+Enum	7:4	SSBS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	CSV3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_DFR1_EL1	3	0	0	3	5
+Res0	63:8
+Enum	7:4	HPMN0
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	MTPMU
+	0b0000	IMPDEF
+	0b0001	IMP
+	0b1111	NI
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR5_EL1	3	0	0	3	6
+Res0	63:8
+Enum	7:4	nTLBPA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	ETS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64PFR0_EL1	3	0	0	4	0
 Enum	63:60	CSV3
 	0b0000	NI
@@ -210,6 +964,7 @@ EndEnum
 Enum	3:0	SVEver
 	0b0000	IMP
 	0b0001	SVE2
+	0b0010	SVE2p1
 EndEnum
 EndSysreg
 
@@ -484,7 +1239,16 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64ISAR2_EL1	3	0	0	6	2
-Res0	63:28
+Res0	63:56
+Enum	55:52	CSSC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	51:48	RPRFM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	47:28
 Enum	27:24	PAC_frac
 	0b0000	NI
 	0b0001	IMP
diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c
index 684667ade525..901df49461a0 100644
--- a/arch/ia64/hp/common/aml_nfw.c
+++ b/arch/ia64/hp/common/aml_nfw.c
@@ -187,9 +187,9 @@ static int aml_nfw_add(struct acpi_device *device)
 	return aml_nfw_add_global_handler();
 }
 
-static int aml_nfw_remove(struct acpi_device *device)
+static void aml_nfw_remove(struct acpi_device *device)
 {
-	return aml_nfw_remove_global_handler();
+	aml_nfw_remove_global_handler();
 }
 
 static const struct acpi_device_id aml_nfw_ids[] = {
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index 903096bd87f8..386adde2feff 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -10,6 +10,7 @@ config LOONGARCH
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index f4cb54d5afd6..01b57b726322 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -97,7 +97,7 @@ KBUILD_LDFLAGS	+= -m $(ld-emul)
 
 ifdef CONFIG_LOONGARCH
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
+	grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 endif
 
diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h
index 17162f494b9b..825c2519b9d1 100644
--- a/arch/loongarch/include/asm/acpi.h
+++ b/arch/loongarch/include/asm/acpi.h
@@ -31,148 +31,6 @@ static inline bool acpi_has_cpu_in_madt(void)
 
 extern struct list_head acpi_wakeup_device_list;
 
-/*
- * Temporary definitions until the core ACPICA code gets updated (see
- * 1656837932-18257-1-git-send-email-lvjianmin@loongson.cn and its
- * follow-ups for the "rationale").
- *
- * Once the "legal reasons" are cleared and that the code is merged,
- * this can be dropped entierely.
- */
-#if (ACPI_CA_VERSION == 0x20220331 && !defined(LOONGARCH_ACPICA_EXT))
-
-#define LOONGARCH_ACPICA_EXT	1
-
-#define	ACPI_MADT_TYPE_CORE_PIC		17
-#define	ACPI_MADT_TYPE_LIO_PIC		18
-#define	ACPI_MADT_TYPE_HT_PIC		19
-#define	ACPI_MADT_TYPE_EIO_PIC		20
-#define	ACPI_MADT_TYPE_MSI_PIC		21
-#define	ACPI_MADT_TYPE_BIO_PIC		22
-#define	ACPI_MADT_TYPE_LPC_PIC		23
-
-/* Values for Version field above */
-
-enum acpi_madt_core_pic_version {
-	ACPI_MADT_CORE_PIC_VERSION_NONE = 0,
-	ACPI_MADT_CORE_PIC_VERSION_V1 = 1,
-	ACPI_MADT_CORE_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_lio_pic_version {
-	ACPI_MADT_LIO_PIC_VERSION_NONE = 0,
-	ACPI_MADT_LIO_PIC_VERSION_V1 = 1,
-	ACPI_MADT_LIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_eio_pic_version {
-	ACPI_MADT_EIO_PIC_VERSION_NONE = 0,
-	ACPI_MADT_EIO_PIC_VERSION_V1 = 1,
-	ACPI_MADT_EIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_ht_pic_version {
-	ACPI_MADT_HT_PIC_VERSION_NONE = 0,
-	ACPI_MADT_HT_PIC_VERSION_V1 = 1,
-	ACPI_MADT_HT_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_bio_pic_version {
-	ACPI_MADT_BIO_PIC_VERSION_NONE = 0,
-	ACPI_MADT_BIO_PIC_VERSION_V1 = 1,
-	ACPI_MADT_BIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_msi_pic_version {
-	ACPI_MADT_MSI_PIC_VERSION_NONE = 0,
-	ACPI_MADT_MSI_PIC_VERSION_V1 = 1,
-	ACPI_MADT_MSI_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-enum acpi_madt_lpc_pic_version {
-	ACPI_MADT_LPC_PIC_VERSION_NONE = 0,
-	ACPI_MADT_LPC_PIC_VERSION_V1 = 1,
-	ACPI_MADT_LPC_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
-};
-
-#pragma pack(1)
-
-/* Core Interrupt Controller */
-
-struct acpi_madt_core_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u32 processor_id;
-	u32 core_id;
-	u32 flags;
-};
-
-/* Legacy I/O Interrupt Controller */
-
-struct acpi_madt_lio_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u64 address;
-	u16 size;
-	u8 cascade[2];
-	u32 cascade_map[2];
-};
-
-/* Extend I/O Interrupt Controller */
-
-struct acpi_madt_eio_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u8 cascade;
-	u8 node;
-	u64 node_map;
-};
-
-/* HT Interrupt Controller */
-
-struct acpi_madt_ht_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u64 address;
-	u16 size;
-	u8 cascade[8];
-};
-
-/* Bridge I/O Interrupt Controller */
-
-struct acpi_madt_bio_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u64 address;
-	u16 size;
-	u16 id;
-	u16 gsi_base;
-};
-
-/* MSI Interrupt Controller */
-
-struct acpi_madt_msi_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u64 msg_address;
-	u32 start;
-	u32 count;
-};
-
-/* LPC Interrupt Controller */
-
-struct acpi_madt_lpc_pic {
-	struct acpi_subtable_header header;
-	u8 version;
-	u64 address;
-	u16 size;
-	u8 cascade;
-};
-
-#pragma pack()
-
-#endif
-
 #endif /* !CONFIG_ACPI */
 
 #define ACPI_TABLE_UPGRADE_MAX_PHYS ARCH_LOW_ADDRESS_LIMIT
diff --git a/arch/loongarch/include/asm/irq.h b/arch/loongarch/include/asm/irq.h
index d06d4542b634..a115e8999c69 100644
--- a/arch/loongarch/include/asm/irq.h
+++ b/arch/loongarch/include/asm/irq.h
@@ -93,7 +93,7 @@ int liointc_acpi_init(struct irq_domain *parent,
 int eiointc_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_eio_pic *acpi_eiointc);
 
-struct irq_domain *htvec_acpi_init(struct irq_domain *parent,
+int htvec_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_ht_pic *acpi_htvec);
 int pch_lpc_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_lpc_pic *acpi_pchlpc);
@@ -117,7 +117,7 @@ extern struct fwnode_handle *liointc_handle;
 extern struct fwnode_handle *pch_lpc_handle;
 extern struct fwnode_handle *pch_pic_handle[MAX_IO_PICS];
 
-extern irqreturn_t loongson3_ipi_interrupt(int irq, void *dev);
+extern irqreturn_t loongson_ipi_interrupt(int irq, void *dev);
 
 #include <asm-generic/irq.h>
 
diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
index 946704bee599..79d5bfd913e0 100644
--- a/arch/loongarch/include/asm/pgtable.h
+++ b/arch/loongarch/include/asm/pgtable.h
@@ -349,13 +349,17 @@ static inline pte_t pte_mkclean(pte_t pte)
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	pte_val(pte) |= (_PAGE_DIRTY | _PAGE_MODIFIED);
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_DIRTY;
 	return pte;
 }
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	pte_val(pte) |= (_PAGE_WRITE | _PAGE_DIRTY);
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_DIRTY;
 	return pte;
 }
 
@@ -455,7 +459,9 @@ static inline int pmd_write(pmd_t pmd)
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
-	pmd_val(pmd) |= (_PAGE_WRITE | _PAGE_DIRTY);
+	pmd_val(pmd) |= _PAGE_WRITE;
+	if (pmd_val(pmd) & _PAGE_MODIFIED)
+		pmd_val(pmd) |= _PAGE_DIRTY;
 	return pmd;
 }
 
@@ -478,10 +484,13 @@ static inline pmd_t pmd_mkclean(pmd_t pmd)
 
 static inline pmd_t pmd_mkdirty(pmd_t pmd)
 {
-	pmd_val(pmd) |= (_PAGE_DIRTY | _PAGE_MODIFIED);
+	pmd_val(pmd) |= _PAGE_MODIFIED;
+	if (pmd_val(pmd) & _PAGE_WRITE)
+		pmd_val(pmd) |= _PAGE_DIRTY;
 	return pmd;
 }
 
+#define pmd_young pmd_young
 static inline int pmd_young(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & _PAGE_ACCESSED);
diff --git a/arch/loongarch/include/asm/smp.h b/arch/loongarch/include/asm/smp.h
index 71189b28bfb2..d82687390b4a 100644
--- a/arch/loongarch/include/asm/smp.h
+++ b/arch/loongarch/include/asm/smp.h
@@ -19,21 +19,21 @@ extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
 extern cpumask_t cpu_foreign_map[];
 
-void loongson3_smp_setup(void);
-void loongson3_prepare_cpus(unsigned int max_cpus);
-void loongson3_boot_secondary(int cpu, struct task_struct *idle);
-void loongson3_init_secondary(void);
-void loongson3_smp_finish(void);
-void loongson3_send_ipi_single(int cpu, unsigned int action);
-void loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action);
+void loongson_smp_setup(void);
+void loongson_prepare_cpus(unsigned int max_cpus);
+void loongson_boot_secondary(int cpu, struct task_struct *idle);
+void loongson_init_secondary(void);
+void loongson_smp_finish(void);
+void loongson_send_ipi_single(int cpu, unsigned int action);
+void loongson_send_ipi_mask(const struct cpumask *mask, unsigned int action);
 #ifdef CONFIG_HOTPLUG_CPU
-int loongson3_cpu_disable(void);
-void loongson3_cpu_die(unsigned int cpu);
+int loongson_cpu_disable(void);
+void loongson_cpu_die(unsigned int cpu);
 #endif
 
 static inline void plat_smp_setup(void)
 {
-	loongson3_smp_setup();
+	loongson_smp_setup();
 }
 
 static inline int raw_smp_processor_id(void)
@@ -78,35 +78,25 @@ extern void calculate_cpu_foreign_map(void);
  */
 extern void show_ipi_list(struct seq_file *p, int prec);
 
-/*
- * This function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-static inline void smp_send_reschedule(int cpu)
-{
-	loongson3_send_ipi_single(cpu, SMP_RESCHEDULE);
-}
-
 static inline void arch_send_call_function_single_ipi(int cpu)
 {
-	loongson3_send_ipi_single(cpu, SMP_CALL_FUNCTION);
+	loongson_send_ipi_single(cpu, SMP_CALL_FUNCTION);
 }
 
 static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	loongson3_send_ipi_mask(mask, SMP_CALL_FUNCTION);
+	loongson_send_ipi_mask(mask, SMP_CALL_FUNCTION);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
 static inline int __cpu_disable(void)
 {
-	return loongson3_cpu_disable();
+	return loongson_cpu_disable();
 }
 
 static inline void __cpu_die(unsigned int cpu)
 {
-	loongson3_cpu_die(cpu);
+	loongson_cpu_die(cpu);
 }
 
 extern void play_dead(void);
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index 335398482038..8319cc409009 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -56,23 +56,6 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 		return ioremap_cache(phys, size);
 }
 
-void __init acpi_boot_table_init(void)
-{
-	/*
-	 * If acpi_disabled, bail out
-	 */
-	if (acpi_disabled)
-		return;
-
-	/*
-	 * Initialize the ACPI boot-time table parser.
-	 */
-	if (acpi_table_init()) {
-		disable_acpi();
-		return;
-	}
-}
-
 #ifdef CONFIG_SMP
 static int set_processor_mask(u32 id, u32 flags)
 {
@@ -156,13 +139,21 @@ static void __init acpi_process_madt(void)
 	loongson_sysconf.nr_cpus = num_processors;
 }
 
-int __init acpi_boot_init(void)
+void __init acpi_boot_table_init(void)
 {
 	/*
 	 * If acpi_disabled, bail out
 	 */
 	if (acpi_disabled)
-		return -1;
+		return;
+
+	/*
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	if (acpi_table_init()) {
+		disable_acpi();
+		return;
+	}
 
 	loongson_sysconf.boot_cpu_id = read_csr_cpuid();
 
@@ -173,8 +164,6 @@ int __init acpi_boot_init(void)
 
 	/* Do not enable ACPI SPCR console by default */
 	acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
-
-	return 0;
 }
 
 #ifdef CONFIG_ACPI_NUMA
diff --git a/arch/loongarch/kernel/irq.c b/arch/loongarch/kernel/irq.c
index 1ba19c76563e..0524bf1169b7 100644
--- a/arch/loongarch/kernel/irq.c
+++ b/arch/loongarch/kernel/irq.c
@@ -117,7 +117,7 @@ void __init init_IRQ(void)
 	if (ipi_irq < 0)
 		panic("IPI IRQ mapping failed\n");
 	irq_set_percpu_devid(ipi_irq);
-	r = request_percpu_irq(ipi_irq, loongson3_ipi_interrupt, "IPI", &ipi_dummy_dev);
+	r = request_percpu_irq(ipi_irq, loongson_ipi_interrupt, "IPI", &ipi_dummy_dev);
 	if (r < 0)
 		panic("IPI IRQ request failed\n");
 #endif
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 77952d814bad..d61c9f465b95 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -152,7 +152,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childregs->csr_crmd = p->thread.csr_crmd;
 		childregs->csr_prmd = p->thread.csr_prmd;
 		childregs->csr_ecfg = p->thread.csr_ecfg;
-		return 0;
+		goto out;
 	}
 
 	/* user thread */
@@ -171,14 +171,15 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	 */
 	childregs->csr_euen = 0;
 
+	if (clone_flags & CLONE_SETTLS)
+		childregs->regs[2] = tls;
+
+out:
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 	clear_tsk_thread_flag(p, TIF_USEDSIMD);
 	clear_tsk_thread_flag(p, TIF_LSX_CTX_LIVE);
 	clear_tsk_thread_flag(p, TIF_LASX_CTX_LIVE);
 
-	if (clone_flags & CLONE_SETTLS)
-		childregs->regs[2] = tls;
-
 	return 0;
 }
 
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index 1eb63fa9bc81..ae436def7ee9 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -257,7 +257,6 @@ void __init platform_init(void)
 #ifdef CONFIG_ACPI
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
-	acpi_boot_init();
 #endif
 
 #ifdef CONFIG_NUMA
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index 781a4d4bdddc..14508d429ffa 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -136,12 +136,12 @@ static void ipi_write_action(int cpu, u32 action)
 	}
 }
 
-void loongson3_send_ipi_single(int cpu, unsigned int action)
+void loongson_send_ipi_single(int cpu, unsigned int action)
 {
 	ipi_write_action(cpu_logical_map(cpu), (u32)action);
 }
 
-void loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+void loongson_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
@@ -149,7 +149,18 @@ void loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 		ipi_write_action(cpu_logical_map(i), (u32)action);
 }
 
-irqreturn_t loongson3_ipi_interrupt(int irq, void *dev)
+/*
+ * This function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+void smp_send_reschedule(int cpu)
+{
+	loongson_send_ipi_single(cpu, SMP_RESCHEDULE);
+}
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
+
+irqreturn_t loongson_ipi_interrupt(int irq, void *dev)
 {
 	unsigned int action;
 	unsigned int cpu = smp_processor_id();
@@ -169,7 +180,7 @@ irqreturn_t loongson3_ipi_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-void __init loongson3_smp_setup(void)
+void __init loongson_smp_setup(void)
 {
 	cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
 	cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
@@ -178,7 +189,7 @@ void __init loongson3_smp_setup(void)
 	pr_info("Detected %i available CPU(s)\n", loongson_sysconf.nr_cpus);
 }
 
-void __init loongson3_prepare_cpus(unsigned int max_cpus)
+void __init loongson_prepare_cpus(unsigned int max_cpus)
 {
 	int i = 0;
 
@@ -193,7 +204,7 @@ void __init loongson3_prepare_cpus(unsigned int max_cpus)
 /*
  * Setup the PC, SP, and TP of a secondary processor and start it running!
  */
-void loongson3_boot_secondary(int cpu, struct task_struct *idle)
+void loongson_boot_secondary(int cpu, struct task_struct *idle)
 {
 	unsigned long entry;
 
@@ -205,13 +216,13 @@ void loongson3_boot_secondary(int cpu, struct task_struct *idle)
 
 	csr_mail_send(entry, cpu_logical_map(cpu), 0);
 
-	loongson3_send_ipi_single(cpu, SMP_BOOT_CPU);
+	loongson_send_ipi_single(cpu, SMP_BOOT_CPU);
 }
 
 /*
  * SMP init and finish on secondary CPUs
  */
-void loongson3_init_secondary(void)
+void loongson_init_secondary(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int imask = ECFGF_IP0 | ECFGF_IP1 | ECFGF_IP2 |
@@ -231,7 +242,7 @@ void loongson3_init_secondary(void)
 		     cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
 }
 
-void loongson3_smp_finish(void)
+void loongson_smp_finish(void)
 {
 	local_irq_enable();
 	iocsr_write64(0, LOONGARCH_IOCSR_MBUF0);
@@ -240,7 +251,7 @@ void loongson3_smp_finish(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-int loongson3_cpu_disable(void)
+int loongson_cpu_disable(void)
 {
 	unsigned long flags;
 	unsigned int cpu = smp_processor_id();
@@ -262,7 +273,7 @@ int loongson3_cpu_disable(void)
 	return 0;
 }
 
-void loongson3_cpu_die(unsigned int cpu)
+void loongson_cpu_die(unsigned int cpu)
 {
 	while (per_cpu(cpu_state, cpu) != CPU_DEAD)
 		cpu_relax();
@@ -300,19 +311,19 @@ void play_dead(void)
  */
 #ifdef CONFIG_PM
 
-static int loongson3_ipi_suspend(void)
+static int loongson_ipi_suspend(void)
 {
 	return 0;
 }
 
-static void loongson3_ipi_resume(void)
+static void loongson_ipi_resume(void)
 {
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_EN);
 }
 
-static struct syscore_ops loongson3_ipi_syscore_ops = {
-	.resume         = loongson3_ipi_resume,
-	.suspend        = loongson3_ipi_suspend,
+static struct syscore_ops loongson_ipi_syscore_ops = {
+	.resume         = loongson_ipi_resume,
+	.suspend        = loongson_ipi_suspend,
 };
 
 /*
@@ -321,7 +332,7 @@ static struct syscore_ops loongson3_ipi_syscore_ops = {
  */
 static int __init ipi_pm_init(void)
 {
-	register_syscore_ops(&loongson3_ipi_syscore_ops);
+	register_syscore_ops(&loongson_ipi_syscore_ops);
 	return 0;
 }
 
@@ -425,7 +436,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = 0;
-	loongson3_prepare_cpus(max_cpus);
+	loongson_prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
 	set_cpu_core_map(0);
 	calculate_cpu_foreign_map();
@@ -436,7 +447,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
-	loongson3_boot_secondary(cpu, tidle);
+	loongson_boot_secondary(cpu, tidle);
 
 	/* Wait for CPU to start and be ready to sync counters */
 	if (!wait_for_completion_timeout(&cpu_starting,
@@ -465,7 +476,7 @@ asmlinkage void start_secondary(void)
 
 	cpu_probe();
 	constant_clockevent_init();
-	loongson3_init_secondary();
+	loongson_init_secondary();
 
 	set_cpu_sibling_map(cpu);
 	set_cpu_core_map(cpu);
@@ -487,11 +498,11 @@ asmlinkage void start_secondary(void)
 	complete(&cpu_running);
 
 	/*
-	 * irq will be enabled in loongson3_smp_finish(), enabling it too
+	 * irq will be enabled in loongson_smp_finish(), enabling it too
 	 * early is dangerous.
 	 */
 	WARN_ON_ONCE(!irqs_disabled());
-	loongson3_smp_finish();
+	loongson_smp_finish();
 
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c
index b206d9159205..4571c3c87cd4 100644
--- a/arch/loongarch/kernel/unwind_prologue.c
+++ b/arch/loongarch/kernel/unwind_prologue.c
@@ -43,7 +43,8 @@ static bool unwind_by_prologue(struct unwind_state *state)
 {
 	struct stack_info *info = &state->stack_info;
 	union loongarch_instruction *ip, *ip_end;
-	unsigned long frame_size = 0, frame_ra = -1;
+	long frame_ra = -1;
+	unsigned long frame_size = 0;
 	unsigned long size, offset, pc = state->pc;
 
 	if (state->sp >= info->end || state->sp < info->begin)
diff --git a/arch/loongarch/mm/tlbex.S b/arch/loongarch/mm/tlbex.S
index d8ee8fbc8c67..58781c6e4191 100644
--- a/arch/loongarch/mm/tlbex.S
+++ b/arch/loongarch/mm/tlbex.S
@@ -10,6 +10,8 @@
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 
+#define INVTLB_ADDR_GFALSE_AND_ASID	5
+
 #define PTRS_PER_PGD_BITS	(PAGE_SHIFT - 3)
 #define PTRS_PER_PUD_BITS	(PAGE_SHIFT - 3)
 #define PTRS_PER_PMD_BITS	(PAGE_SHIFT - 3)
@@ -136,13 +138,10 @@ tlb_huge_update_load:
 	ori		t0, ra, _PAGE_VALID
 	st.d		t0, t1, 0
 #endif
-	tlbsrch
-	addu16i.d	t1, zero, -(CSR_TLBIDX_EHINV >> 16)
-	addi.d		ra, t1, 0
-	csrxchg		ra, t1, LOONGARCH_CSR_TLBIDX
-	tlbwr
-
-	csrxchg		zero, t1, LOONGARCH_CSR_TLBIDX
+	csrrd		ra, LOONGARCH_CSR_ASID
+	csrrd		t1, LOONGARCH_CSR_BADV
+	andi		ra, ra, CSR_ASID_ASID
+	invtlb		INVTLB_ADDR_GFALSE_AND_ASID, ra, t1
 
 	/*
 	 * A huge PTE describes an area the size of the
@@ -287,13 +286,11 @@ tlb_huge_update_store:
 	ori		t0, ra, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 	st.d		t0, t1, 0
 #endif
-	tlbsrch
-	addu16i.d	t1, zero, -(CSR_TLBIDX_EHINV >> 16)
-	addi.d		ra, t1, 0
-	csrxchg		ra, t1, LOONGARCH_CSR_TLBIDX
-	tlbwr
+	csrrd		ra, LOONGARCH_CSR_ASID
+	csrrd		t1, LOONGARCH_CSR_BADV
+	andi		ra, ra, CSR_ASID_ASID
+	invtlb		INVTLB_ADDR_GFALSE_AND_ASID, ra, t1
 
-	csrxchg		zero, t1, LOONGARCH_CSR_TLBIDX
 	/*
 	 * A huge PTE describes an area the size of the
 	 * configured huge page size. This is twice the
@@ -436,6 +433,11 @@ tlb_huge_update_modify:
 	ori		t0, ra, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
 	st.d		t0, t1, 0
 #endif
+	csrrd		ra, LOONGARCH_CSR_ASID
+	csrrd		t1, LOONGARCH_CSR_BADV
+	andi		ra, ra, CSR_ASID_ASID
+	invtlb		INVTLB_ADDR_GFALSE_AND_ASID, ra, t1
+
 	/*
 	 * A huge PTE describes an area the size of the
 	 * configured huge page size. This is twice the
@@ -466,7 +468,7 @@ tlb_huge_update_modify:
 	addu16i.d	t1, zero, (PS_HUGE_SIZE << (CSR_TLBIDX_PS_SHIFT - 16))
 	csrxchg		t1, t0, LOONGARCH_CSR_TLBIDX
 
-	tlbwr
+	tlbfill
 
 	/* Reset default page size */
 	addu16i.d	t0, zero, (CSR_TLBIDX_PS >> 16)
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index e2038d9499e4..7b49fe6f7cb3 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -562,29 +562,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -593,11 +574,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index ddd201259e43..656a06d97d4c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -519,29 +519,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -550,11 +531,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index d9f783707387..8972b822875d 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -539,29 +539,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -570,11 +551,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 68957c6bcff1..7b86e1277a1a 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -511,29 +511,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -542,11 +523,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 825c6a02fa9d..d0d5c0a9aee6 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -521,29 +521,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -552,11 +533,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 17f64c562bf1..ac1d0c86b6ff 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -541,29 +541,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -572,11 +553,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index f5f4c572b694..c5f7603c9830 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -627,29 +627,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -658,11 +639,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index b4a0bbef7e39..26f5b59e3bc0 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -510,29 +510,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -541,11 +522,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index c6a6d5926793..3045c7f0bde3 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -511,29 +511,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -542,11 +523,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 49c9c89f0caf..f2a486be651b 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -528,29 +528,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -559,11 +540,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 9b44eeb9c07f..8a7db7be10c0 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -510,29 +510,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -541,11 +522,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index d2ffb0a65b44..7ed49ee0b9e0 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -509,29 +509,10 @@ CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_SM2=m
 CONFIG_CRYPTO_CURVE25519=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
-CONFIG_CRYPTO_ADIANTUM=m
-CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
@@ -540,11 +521,30 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_ARIA=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ADIANTUM=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_HCTR2=m
+CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3_GENERIC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 557d60867f98..6fdc13610565 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -49,7 +49,7 @@ static void nfcon_write(struct console *con, const char *str,
 static struct tty_driver *nfcon_device(struct console *con, int *index)
 {
 	*index = 0;
-	return (con->flags & CON_ENABLED) ? nfcon_tty_driver : NULL;
+	return console_is_registered(con) ? nfcon_tty_driver : NULL;
 }
 
 static struct console nf_console = {
@@ -107,6 +107,11 @@ static int __init nf_debug_setup(char *arg)
 
 	stderr_id = nf_get_id("NF_STDERR");
 	if (stderr_id) {
+		/*
+		 * The console will be enabled when debug=nfcon is specified
+		 * as a kernel parameter. Since this is a non-standard way
+		 * of enabling consoles, it must be explicitly enabled.
+		 */
 		nf_console.flags |= CON_ENABLED;
 		register_console(&nf_console);
 	}
@@ -151,7 +156,7 @@ static int __init nfcon_init(void)
 
 	nfcon_tty_driver = driver;
 
-	if (!(nf_console.flags & CON_ENABLED))
+	if (!console_is_registered(&nf_console))
 		register_console(&nf_console);
 
 	return 0;
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index 1149251ea58d..a9ef1e9ba6c4 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -267,14 +267,6 @@ extern void via1_irq(struct irq_desc *desc);
 extern void via1_set_head(int);
 extern int via2_scsi_drq_pending(void);
 
-static inline int rbv_set_video_bpp(int bpp)
-{
-	char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
-	if (!rbv_present || val<0) return -1;
-	via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
-	return 0;
-}
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_MAC_VIA_H_ */
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 4fab34791758..c7cb29f0ff01 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -126,7 +126,7 @@ static void via_rtc_send(__u8 data)
 
 	reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
 
-	/* The bits of the byte go in in MSB order */
+	/* The bits of the byte go into the RTC in MSB order */
 
 	for (i = 0 ; i < 8 ; i++) {
 		bit = data & 0x80? 1 : 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 4ebb56d6d959..cc88af6fa7a4 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -215,11 +215,3 @@ config MB_MANAGER
 	  Say N here unless you know what you are doing.
 
 endmenu
-
-menu "Bus Options"
-
-config PCI_XILINX
-	bool "Xilinx PCI host bridge support"
-	depends on PCI
-
-endmenu
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 3f8a86c4336a..02e6be9c5b0d 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -67,12 +67,12 @@ linux.bin.ub linux.bin.gz: linux.bin
 linux.bin: vmlinux
 linux.bin linux.bin.gz linux.bin.ub:
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 PHONY += simpleImage.$(DTB)
 simpleImage.$(DTB): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
-	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 define archhelp
   echo '* linux.bin    - Create raw binary'
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 8150daf04a76..756feb9369a6 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -19,7 +19,6 @@ CONFIG_HZ_100=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE_FORCE=y
 CONFIG_HIGHMEM=y
-CONFIG_PCI_XILINX=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 171b40a2d905..be5f504bead4 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -25,75 +25,17 @@ static inline int pcibios_vaddr_is_ioport(void __iomem *address)
  */
 struct pci_controller {
 	struct pci_bus *bus;
-	char is_dynamic;
-	struct device_node *dn;
 	struct list_head list_node;
-	struct device *parent;
-
-	int first_busno;
-	int last_busno;
-
-	int self_busno;
 
 	void __iomem *io_base_virt;
-	resource_size_t io_base_phys;
-
-	resource_size_t pci_io_size;
-
-	/* Some machines (PReP) have a non 1:1 mapping of
-	 * the PCI memory space in the CPU bus space
-	 */
-	resource_size_t pci_mem_offset;
-
-	/* Some machines have a special region to forward the ISA
-	 * "memory" cycles such as VGA memory regions. Left to 0
-	 * if unsupported
-	 */
-	resource_size_t isa_mem_phys;
-	resource_size_t isa_mem_size;
-
-	struct pci_ops *ops;
-	unsigned int __iomem *cfg_addr;
-	void __iomem *cfg_data;
-
-	/*
-	 * Used for variants of PCI indirect handling and possible quirks:
-	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
-	 *  EXT_REG - provides access to PCI-e extended registers
-	 *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
-	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
-	 *   to determine which bus number to match on when generating type0
-	 *   config cycles
-	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
-	 *   hanging if we don't have link and try to do config cycles to
-	 *   anything but the PHB.  Only allow talking to the PHB if this is
-	 *   set.
-	 *  BIG_ENDIAN - cfg_addr is a big endian register
-	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
-	 *   on the PLB4.  Effectively disable MRM commands by setting this.
-	 */
-#define INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
-#define INDIRECT_TYPE_EXT_REG		0x00000002
-#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
-#define INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
-#define INDIRECT_TYPE_BIG_ENDIAN		0x00000010
-#define INDIRECT_TYPE_BROKEN_MRM		0x00000020
-	u32 indirect_type;
 
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
 	struct resource io_resource;
-	struct resource mem_resources[3];
-	int global_number;	/* PCI domain number */
 };
 
 #ifdef CONFIG_PCI
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it
@@ -103,39 +45,5 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
 }
 #endif /* CONFIG_PCI */
 
-/* These are used for config access before all the PCI probing
-   has been done. */
-extern int early_read_config_byte(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u8 *val);
-extern int early_read_config_word(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u16 *val);
-extern int early_read_config_dword(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u32 *val);
-extern int early_write_config_byte(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u8 val);
-extern int early_write_config_word(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u16 val);
-extern int early_write_config_dword(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u32 val);
-
-extern int early_find_capability(struct pci_controller *hose, int bus,
-				 int dev_fn, int cap);
-
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       resource_size_t cfg_addr,
-			       resource_size_t cfg_data, u32 flags);
-
-/* Get the PCI host controller for an OF device */
-extern struct pci_controller *pci_find_hose_for_OF_device(
-			struct device_node *node);
-
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
-/* Allocate & free a PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
-extern void pcibios_free_controller(struct pci_controller *phb);
-
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index d90528064604..91f1f71c266a 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -21,15 +21,6 @@
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
 
-/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
-#define IOBASE_BRIDGE_NUMBER	0
-#define IOBASE_MEMORY		1
-#define IOBASE_IO		2
-#define IOBASE_ISA_IO		3
-#define IOBASE_ISA_MEM		4
-
-#define pcibios_scan_all_fns(a, b)	0
-
 /*
  * Set this to 1 if you want the kernel to re-assign all PCI
  * bus numbers (don't do that on ppc64 yet !)
@@ -41,33 +32,13 @@ extern int pci_domain_nr(struct pci_bus *bus);
 /* Decide whether to display the domain number in /proc */
 extern int pci_proc_domain(struct pci_bus *bus);
 
-struct vm_area_struct;
-
 /* Tell PCI code what kind of PCI resource mappings we support */
 #define HAVE_PCI_MMAP			1
 #define ARCH_GENERIC_PCI_MMAP_RESOURCE	1
-#define arch_can_pci_mmap_io()		1
-
-extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
-			   size_t count);
-extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
-			   size_t count);
-extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
-				      struct vm_area_struct *vma,
-				      enum pci_mmap_state mmap_state);
-
-#define HAVE_PCI_LEGACY	1
-
-extern void pcibios_resource_survey(void);
 
 struct file;
 
-/* This part of code was originally in xilinx-pci.h */
-#ifdef CONFIG_PCI_XILINX
-extern void __init xilinx_pci_init(void);
-#else
 static inline void __init xilinx_pci_init(void) { return; }
-#endif
 
 #endif	/* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_PCI_H */
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
index 0251c20e1d62..f8267d20e067 100644
--- a/arch/microblaze/pci/Makefile
+++ b/arch/microblaze/pci/Makefile
@@ -3,5 +3,4 @@
 # Makefile
 #
 
-obj-$(CONFIG_PCI)		+= pci-common.o indirect_pci.o iomap.o
-obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o
+obj-$(CONFIG_PCI)		+= iomap.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
deleted file mode 100644
index 1caf7d3e0eef..000000000000
--- a/arch/microblaze/pci/indirect_pci.c
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <linux/io.h>
-#include <asm/pci-bridge.h>
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-	u32 bus_no, reg;
-
-	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
-
-	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
-		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
-	else
-		reg = offset & 0xfc; /* Only 3 bits for function */
-
-	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
-		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-	else
-		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-	u32 bus_no, reg;
-
-	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
-
-	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
-		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
-	else
-		reg = offset & 0xfc;
-
-	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
-		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-	else
-		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-
-	/* suppress setting of PCI_PRIMARY_BUS */
-	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
-		if ((offset == PCI_PRIMARY_BUS) &&
-			(bus->number == hose->first_busno))
-			val &= 0xffffff00;
-
-	/* Workaround for PCI_28 Errata in 440EPx/GRx */
-	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
-			offset == PCI_CACHE_LINE_SIZE) {
-		val = 0;
-	}
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops = {
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void __init
-setup_indirect_pci(struct pci_controller *hose,
-		   resource_size_t cfg_addr,
-		   resource_size_t cfg_data, u32 flags)
-{
-	resource_size_t base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
-	hose->ops = &indirect_pci_ops;
-	hose->indirect_type = flags;
-}
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
index bde74af4c1cd..b2ee8ace9b6e 100644
--- a/arch/microblaze/pci/iomap.c
+++ b/arch/microblaze/pci/iomap.c
@@ -11,6 +11,42 @@
 #include <linux/io.h>
 #include <asm/pci-bridge.h>
 
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+unsigned long isa_io_base;
+EXPORT_SYMBOL(isa_io_base);
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+	return resource_size(&hose->io_resource);
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	int ret = 0;
+	struct pci_controller *hose;
+	resource_size_t size;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_virt &&
+		    address < (hose->io_base_virt + size)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+	return ret;
+}
+
+/* Display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+
 void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
 {
 	if (isa_vaddr_is_ioport(addr))
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
deleted file mode 100644
index 33bab7eec731..000000000000
--- a/arch/microblaze/pci/pci-common.c
+++ /dev/null
@@ -1,1067 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Contains common pci routines for ALL ppc platform
- * (based on pci_32.c and pci_64.c)
- *
- * Port for PPC64 David Engebretsen, IBM Corp.
- * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
- *
- * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
- *   Rework, based on alpha PCI code.
- *
- * Common pmac/prep/chrp pci routines. -- Cort
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/mm.h>
-#include <linux/shmem_fs.h>
-#include <linux/list.h>
-#include <linux/syscalls.h>
-#include <linux/irq.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-#include <linux/export.h>
-
-#include <asm/processor.h>
-#include <linux/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/byteorder.h>
-
-static DEFINE_SPINLOCK(hose_spinlock);
-LIST_HEAD(hose_list);
-
-/* XXX kill that some day ... */
-static int global_phb_number;		/* Global phb counter */
-
-/* ISA Memory physical address */
-resource_size_t isa_mem_base;
-
-unsigned long isa_io_base;
-EXPORT_SYMBOL(isa_io_base);
-
-static int pci_bus_count;
-
-struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
-{
-	struct pci_controller *phb;
-
-	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
-	if (!phb)
-		return NULL;
-	spin_lock(&hose_spinlock);
-	phb->global_number = global_phb_number++;
-	list_add_tail(&phb->list_node, &hose_list);
-	spin_unlock(&hose_spinlock);
-	phb->dn = dev;
-	phb->is_dynamic = mem_init_done;
-	return phb;
-}
-
-void pcibios_free_controller(struct pci_controller *phb)
-{
-	spin_lock(&hose_spinlock);
-	list_del(&phb->list_node);
-	spin_unlock(&hose_spinlock);
-
-	if (phb->is_dynamic)
-		kfree(phb);
-}
-
-static resource_size_t pcibios_io_size(const struct pci_controller *hose)
-{
-	return resource_size(&hose->io_resource);
-}
-
-int pcibios_vaddr_is_ioport(void __iomem *address)
-{
-	int ret = 0;
-	struct pci_controller *hose;
-	resource_size_t size;
-
-	spin_lock(&hose_spinlock);
-	list_for_each_entry(hose, &hose_list, list_node) {
-		size = pcibios_io_size(hose);
-		if (address >= hose->io_base_virt &&
-		    address < (hose->io_base_virt + size)) {
-			ret = 1;
-			break;
-		}
-	}
-	spin_unlock(&hose_spinlock);
-	return ret;
-}
-
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	struct pci_controller *hose;
-	resource_size_t size;
-	unsigned long ret = ~0;
-
-	spin_lock(&hose_spinlock);
-	list_for_each_entry(hose, &hose_list, list_node) {
-		size = pcibios_io_size(hose);
-		if (address >= hose->io_base_phys &&
-		    address < (hose->io_base_phys + size)) {
-			unsigned long base =
-				(unsigned long)hose->io_base_virt - _IO_BASE;
-			ret = base + (address - hose->io_base_phys);
-			break;
-		}
-	}
-	spin_unlock(&hose_spinlock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pci_address_to_pio);
-
-/* This routine is meant to be used early during boot, when the
- * PCI bus numbers have not yet been assigned, and you need to
- * issue PCI config cycles to an OF device.
- * It could also be used to "fix" RTAS config cycles if you want
- * to set pci_assign_all_buses to 1 and still use RTAS for PCI
- * config cycles.
- */
-struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node)
-{
-	while (node) {
-		struct pci_controller *hose, *tmp;
-		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
-			if (hose->dn == node)
-				return hose;
-		node = node->parent;
-	}
-	return NULL;
-}
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-/*
- * Platform support for /proc/bus/pci/X/Y mmap()s.
- */
-
-int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
-{
-	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	resource_size_t ioaddr = pci_resource_start(pdev, bar);
-
-	if (!hose)
-		return -EINVAL;		/* should never happen */
-
-	/* Convert to an offset within this PCI controller */
-	ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT;
-	return 0;
-}
-
-/* This provides legacy IO read access on a bus */
-int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
-{
-	unsigned long offset;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct resource *rp = &hose->io_resource;
-	void __iomem *addr;
-
-	/* Check if port can be supported by that bus. We only check
-	 * the ranges of the PHB though, not the bus itself as the rules
-	 * for forwarding legacy cycles down bridges are not our problem
-	 * here. So if the host bridge supports it, we do it.
-	 */
-	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-	offset += port;
-
-	if (!(rp->flags & IORESOURCE_IO))
-		return -ENXIO;
-	if (offset < rp->start || (offset + size) > rp->end)
-		return -ENXIO;
-	addr = hose->io_base_virt + port;
-
-	switch (size) {
-	case 1:
-		*((u8 *)val) = in_8(addr);
-		return 1;
-	case 2:
-		if (port & 1)
-			return -EINVAL;
-		*((u16 *)val) = in_le16(addr);
-		return 2;
-	case 4:
-		if (port & 3)
-			return -EINVAL;
-		*((u32 *)val) = in_le32(addr);
-		return 4;
-	}
-	return -EINVAL;
-}
-
-/* This provides legacy IO write access on a bus */
-int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
-{
-	unsigned long offset;
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct resource *rp = &hose->io_resource;
-	void __iomem *addr;
-
-	/* Check if port can be supported by that bus. We only check
-	 * the ranges of the PHB though, not the bus itself as the rules
-	 * for forwarding legacy cycles down bridges are not our problem
-	 * here. So if the host bridge supports it, we do it.
-	 */
-	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-	offset += port;
-
-	if (!(rp->flags & IORESOURCE_IO))
-		return -ENXIO;
-	if (offset < rp->start || (offset + size) > rp->end)
-		return -ENXIO;
-	addr = hose->io_base_virt + port;
-
-	/* WARNING: The generic code is idiotic. It gets passed a pointer
-	 * to what can be a 1, 2 or 4 byte quantity and always reads that
-	 * as a u32, which means that we have to correct the location of
-	 * the data read within those 32 bits for size 1 and 2
-	 */
-	switch (size) {
-	case 1:
-		out_8(addr, val >> 24);
-		return 1;
-	case 2:
-		if (port & 1)
-			return -EINVAL;
-		out_le16(addr, val >> 16);
-		return 2;
-	case 4:
-		if (port & 3)
-			return -EINVAL;
-		out_le32(addr, val);
-		return 4;
-	}
-	return -EINVAL;
-}
-
-/* This provides legacy IO or memory mmap access on a bus */
-int pci_mmap_legacy_page_range(struct pci_bus *bus,
-			       struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	resource_size_t offset =
-		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
-	resource_size_t size = vma->vm_end - vma->vm_start;
-	struct resource *rp;
-
-	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
-		 pci_domain_nr(bus), bus->number,
-		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
-		 (unsigned long long)offset,
-		 (unsigned long long)(offset + size - 1));
-
-	if (mmap_state == pci_mmap_mem) {
-		/* Hack alert !
-		 *
-		 * Because X is lame and can fail starting if it gets an error
-		 * trying to mmap legacy_mem (instead of just moving on without
-		 * legacy memory access) we fake it here by giving it anonymous
-		 * memory, effectively behaving just like /dev/zero
-		 */
-		if ((offset + size) > hose->isa_mem_size) {
-			pr_debug("Process %s (pid:%d) mapped non-existing PCI",
-				current->comm, current->pid);
-			pr_debug("legacy memory for 0%04x:%02x\n",
-				pci_domain_nr(bus), bus->number);
-			if (vma->vm_flags & VM_SHARED)
-				return shmem_zero_setup(vma);
-			return 0;
-		}
-		offset += hose->isa_mem_phys;
-	} else {
-		unsigned long io_offset = (unsigned long)hose->io_base_virt -
-								_IO_BASE;
-		unsigned long roffset = offset + io_offset;
-		rp = &hose->io_resource;
-		if (!(rp->flags & IORESOURCE_IO))
-			return -ENXIO;
-		if (roffset < rp->start || (roffset + size) > rp->end)
-			return -ENXIO;
-		offset += hose->io_base_phys;
-	}
-	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
-
-	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot);
-}
-
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
-			  const struct resource *rsrc,
-			  resource_size_t *start, resource_size_t *end)
-{
-	struct pci_bus_region region;
-
-	if (rsrc->flags & IORESOURCE_IO) {
-		pcibios_resource_to_bus(dev->bus, &region,
-					(struct resource *) rsrc);
-		*start = region.start;
-		*end = region.end;
-		return;
-	}
-
-	/* We pass a CPU physical address to userland for MMIO instead of a
-	 * BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem!
-	 *
-	 * That means we may have 64-bit values where some apps only expect
-	 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
-	 */
-	*start = rsrc->start;
-	*end = rsrc->end;
-}
-
-/**
- * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
- * @hose: newly allocated pci_controller to be setup
- * @dev: device node of the host bridge
- * @primary: set if primary bus (32 bits only, soon to be deprecated)
- *
- * This function will parse the "ranges" property of a PCI host bridge device
- * node and setup the resource mapping of a pci controller based on its
- * content.
- *
- * Life would be boring if it wasn't for a few issues that we have to deal
- * with here:
- *
- *   - We can only cope with one IO space range and up to 3 Memory space
- *     ranges. However, some machines (thanks Apple !) tend to split their
- *     space into lots of small contiguous ranges. So we have to coalesce.
- *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
- *   - Some busses have IO space not starting at 0, which causes trouble with
- *     the way we do our IO resource renumbering. The code somewhat deals with
- *     it for 64 bits but I would expect problems on 32 bits.
- *
- *   - Some 32 bits platforms such as 4xx can have physical space larger than
- *     32 bits so we need to use 64 bits values for the parsing
- */
-void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-				  struct device_node *dev, int primary)
-{
-	int memno = 0, isa_hole = -1;
-	unsigned long long isa_mb = 0;
-	struct resource *res;
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
-
-	pr_info("PCI host bridge %pOF %s ranges:\n",
-	       dev, primary ? "(primary)" : "");
-
-	/* Check for ranges property */
-	if (of_pci_range_parser_init(&parser, dev))
-		return;
-
-	pr_debug("Parsing ranges property...\n");
-	for_each_of_pci_range(&parser, &range) {
-		/* Read next ranges element */
-
-		/* If we failed translation or got a zero-sized region
-		 * (some FW try to feed us with non sensical zero sized regions
-		 * such as power3 which look like some kind of attempt
-		 * at exposing the VGA memory hole)
-		 */
-		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
-			continue;
-
-		/* Act based on address space type */
-		res = NULL;
-		switch (range.flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_IO:
-			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-				range.cpu_addr, range.cpu_addr + range.size - 1,
-				range.pci_addr);
-
-			/* We support only one IO range */
-			if (hose->pci_io_size) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* On 32 bits, limit I/O space to 16MB */
-			if (range.size > 0x01000000)
-				range.size = 0x01000000;
-
-			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(range.cpu_addr,
-						range.size);
-
-			/* Expect trouble if pci_addr is not 0 */
-			if (primary)
-				isa_io_base =
-					(unsigned long)hose->io_base_virt;
-			/* pci_io_size and io_base_phys always represent IO
-			 * space starting at 0 so we factor in pci_addr
-			 */
-			hose->pci_io_size = range.pci_addr + range.size;
-			hose->io_base_phys = range.cpu_addr - range.pci_addr;
-
-			/* Build resource */
-			res = &hose->io_resource;
-			range.cpu_addr = range.pci_addr;
-
-			break;
-		case IORESOURCE_MEM:
-			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-				range.cpu_addr, range.cpu_addr + range.size - 1,
-				range.pci_addr,
-				(range.flags & IORESOURCE_PREFETCH) ?
-				"Prefetch" : "");
-
-			/* We support only 3 memory ranges */
-			if (memno >= 3) {
-				pr_info(" \\--> Skipped (too many) !\n");
-				continue;
-			}
-			/* Handles ISA memory hole space here */
-			if (range.pci_addr == 0) {
-				isa_mb = range.cpu_addr;
-				isa_hole = memno;
-				if (primary || isa_mem_base == 0)
-					isa_mem_base = range.cpu_addr;
-				hose->isa_mem_phys = range.cpu_addr;
-				hose->isa_mem_size = range.size;
-			}
-
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && range.pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = range.cpu_addr -
-							range.pci_addr;
-			else if (range.pci_addr != 0 &&
-				 hose->pci_mem_offset != range.cpu_addr -
-							range.pci_addr) {
-				pr_info(" \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
-			/* Build resource */
-			res = &hose->mem_resources[memno++];
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->flags = range.flags;
-			res->start = range.cpu_addr;
-			res->end = range.cpu_addr + range.size - 1;
-			res->parent = res->child = res->sibling = NULL;
-		}
-	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
-}
-
-/* Display the domain number in /proc */
-int pci_proc_domain(struct pci_bus *bus)
-{
-	return pci_domain_nr(bus);
-}
-
-/* This header fixup will do the resource fixup for all devices as they are
- * probed, but not for bridge ranges
- */
-static void pcibios_fixup_resources(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	int i;
-
-	if (!hose) {
-		pr_err("No host bridge for PCI dev %s !\n",
-		       pci_name(dev));
-		return;
-	}
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = dev->resource + i;
-		if (!res->flags)
-			continue;
-		if (res->start == 0) {
-			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]",
-				 pci_name(dev), i,
-				 (unsigned long long)res->start,
-				 (unsigned long long)res->end,
-				 (unsigned int)res->flags);
-			pr_debug("is unassigned\n");
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-			continue;
-		}
-
-		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n",
-			 pci_name(dev), i,
-			 (unsigned long long)res->start,
-			 (unsigned long long)res->end,
-			 (unsigned int)res->flags);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
-
-int pcibios_device_add(struct pci_dev *dev)
-{
-	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
-
-	return 0;
-}
-
-/*
- * Reparent resource children of pr that conflict with res
- * under res, and make res replace those children.
- */
-static int __init reparent_resources(struct resource *parent,
-				     struct resource *res)
-{
-	struct resource *p, **pp;
-	struct resource **firstpp = NULL;
-
-	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
-		if (p->end < res->start)
-			continue;
-		if (res->end < p->start)
-			break;
-		if (p->start < res->start || p->end > res->end)
-			return -1;	/* not completely contained */
-		if (firstpp == NULL)
-			firstpp = pp;
-	}
-	if (firstpp == NULL)
-		return -1;	/* didn't find any conflicting entries? */
-	res->parent = parent;
-	res->child = *firstpp;
-	res->sibling = *pp;
-	*firstpp = res;
-	*pp = NULL;
-	for (p = res->child; p != NULL; p = p->sibling) {
-		p->parent = res;
-		pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
-			 p->name,
-			 (unsigned long long)p->start,
-			 (unsigned long long)p->end, res->name);
-	}
-	return 0;
-}
-
-/*
- *  Handle resources of PCI devices.  If the world were perfect, we could
- *  just allocate all the resource regions and do nothing more.  It isn't.
- *  On the other hand, we cannot just re-allocate all devices, as it would
- *  require us to know lots of host bridge internals.  So we attempt to
- *  keep as much of the original configuration as possible, but tweak it
- *  when it's found to be wrong.
- *
- *  Known BIOS problems we have to work around:
- *	- I/O or memory regions not configured
- *	- regions configured, but not enabled in the command register
- *	- bogus I/O addresses above 64K used
- *	- expansion ROMs left enabled (this may sound harmless, but given
- *	  the fact the PCI specs explicitly allow address decoders to be
- *	  shared between expansion ROMs and other resource regions, it's
- *	  at least dangerous)
- *
- *  Our solution:
- *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
- *	    This gives us fixed barriers on where we can allocate.
- *	(2) Allocate resources for all enabled devices.  If there is
- *	    a collision, just mark the resource as unallocated. Also
- *	    disable expansion ROMs during this step.
- *	(3) Try to allocate resources for disabled devices.  If the
- *	    resources were assigned correctly, everything goes well,
- *	    if they weren't, they won't disturb allocation of other
- *	    resources.
- *	(4) Assign new addresses to resources which were either
- *	    not configured at all or misconfigured.  If explicitly
- *	    requested by the user, configure expansion ROM address
- *	    as well.
- */
-
-static void pcibios_allocate_bus_resources(struct pci_bus *bus)
-{
-	struct pci_bus *b;
-	int i;
-	struct resource *res, *pr;
-
-	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
-		 pci_domain_nr(bus), bus->number);
-
-	pci_bus_for_each_resource(bus, res, i) {
-		if (!res || !res->flags
-		    || res->start > res->end || res->parent)
-			continue;
-		if (bus->parent == NULL)
-			pr = (res->flags & IORESOURCE_IO) ?
-				&ioport_resource : &iomem_resource;
-		else {
-			/* Don't bother with non-root busses when
-			 * re-assigning all resources. We clear the
-			 * resource flags as if they were colliding
-			 * and as such ensure proper re-allocation
-			 * later.
-			 */
-			pr = pci_find_parent_resource(bus->self, res);
-			if (pr == res) {
-				/* this happens when the generic PCI
-				 * code (wrongly) decides that this
-				 * bridge is transparent  -- paulus
-				 */
-				continue;
-			}
-		}
-
-		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx ",
-			 bus->self ? pci_name(bus->self) : "PHB",
-			 bus->number, i,
-			 (unsigned long long)res->start,
-			 (unsigned long long)res->end);
-		pr_debug("[0x%x], parent %p (%s)\n",
-			 (unsigned int)res->flags,
-			 pr, (pr && pr->name) ? pr->name : "nil");
-
-		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
-			struct pci_dev *dev = bus->self;
-
-			if (request_resource(pr, res) == 0)
-				continue;
-			/*
-			 * Must be a conflict with an existing entry.
-			 * Move that entry (or entries) under the
-			 * bridge resource and try again.
-			 */
-			if (reparent_resources(pr, res) == 0)
-				continue;
-
-			if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
-			    pci_claim_bridge_resource(dev,
-						 i + PCI_BRIDGE_RESOURCES) == 0)
-				continue;
-
-		}
-		pr_warn("PCI: Cannot allocate resource region ");
-		pr_cont("%d of PCI bridge %d, will remap\n", i, bus->number);
-		res->start = res->end = 0;
-		res->flags = 0;
-	}
-
-	list_for_each_entry(b, &bus->children, node)
-		pcibios_allocate_bus_resources(b);
-}
-
-static inline void alloc_resource(struct pci_dev *dev, int idx)
-{
-	struct resource *pr, *r = &dev->resource[idx];
-
-	pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
-		 pci_name(dev), idx,
-		 (unsigned long long)r->start,
-		 (unsigned long long)r->end,
-		 (unsigned int)r->flags);
-
-	pr = pci_find_parent_resource(dev, r);
-	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
-	    request_resource(pr, r) < 0) {
-		pr_warn("PCI: Cannot allocate resource region %d ", idx);
-		pr_cont("of device %s, will remap\n", pci_name(dev));
-		if (pr)
-			pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
-				 pr,
-				 (unsigned long long)pr->start,
-				 (unsigned long long)pr->end,
-				 (unsigned int)pr->flags);
-		/* We'll assign a new address later */
-		r->flags |= IORESOURCE_UNSET;
-		r->end -= r->start;
-		r->start = 0;
-	}
-}
-
-static void __init pcibios_allocate_resources(int pass)
-{
-	struct pci_dev *dev = NULL;
-	int idx, disabled;
-	u16 command;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
-			r = &dev->resource[idx];
-			if (r->parent)		/* Already allocated */
-				continue;
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;	/* Not assigned at all */
-			/* We only allocate ROMs on pass 1 just in case they
-			 * have been screwed up by firmware
-			 */
-			if (idx == PCI_ROM_RESOURCE)
-				disabled = 1;
-			if (r->flags & IORESOURCE_IO)
-				disabled = !(command & PCI_COMMAND_IO);
-			else
-				disabled = !(command & PCI_COMMAND_MEMORY);
-			if (pass == disabled)
-				alloc_resource(dev, idx);
-		}
-		if (pass)
-			continue;
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags) {
-			/* Turn the ROM off, leave the resource region,
-			 * but keep it unregistered.
-			 */
-			u32 reg;
-			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			if (reg & PCI_ROM_ADDRESS_ENABLE) {
-				pr_debug("PCI: Switching off ROM of %s\n",
-					 pci_name(dev));
-				r->flags &= ~IORESOURCE_ROM_ENABLE;
-				pci_write_config_dword(dev, dev->rom_base_reg,
-						reg & ~PCI_ROM_ADDRESS_ENABLE);
-			}
-		}
-	}
-}
-
-static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	resource_size_t	offset;
-	struct resource *res, *pres;
-	int i;
-
-	pr_debug("Reserving legacy ranges for domain %04x\n",
-							pci_domain_nr(bus));
-
-	/* Check for IO */
-	if (!(hose->io_resource.flags & IORESOURCE_IO))
-		goto no_io;
-	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	BUG_ON(res == NULL);
-	res->name = "Legacy IO";
-	res->flags = IORESOURCE_IO;
-	res->start = offset;
-	res->end = (offset + 0xfff) & 0xfffffffful;
-	pr_debug("Candidate legacy IO: %pR\n", res);
-	if (request_resource(&hose->io_resource, res)) {
-		pr_debug("PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
-		       pci_domain_nr(bus), bus->number, res);
-		kfree(res);
-	}
-
- no_io:
-	/* Check for memory */
-	offset = hose->pci_mem_offset;
-	pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
-	for (i = 0; i < 3; i++) {
-		pres = &hose->mem_resources[i];
-		if (!(pres->flags & IORESOURCE_MEM))
-			continue;
-		pr_debug("hose mem res: %pR\n", pres);
-		if ((pres->start - offset) <= 0xa0000 &&
-		    (pres->end - offset) >= 0xbffff)
-			break;
-	}
-	if (i >= 3)
-		return;
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	BUG_ON(res == NULL);
-	res->name = "Legacy VGA memory";
-	res->flags = IORESOURCE_MEM;
-	res->start = 0xa0000 + offset;
-	res->end = 0xbffff + offset;
-	pr_debug("Candidate VGA memory: %pR\n", res);
-	if (request_resource(pres, res)) {
-		pr_debug("PCI %04x:%02x Cannot reserve VGA memory %pR\n",
-		       pci_domain_nr(bus), bus->number, res);
-		kfree(res);
-	}
-}
-
-void __init pcibios_resource_survey(void)
-{
-	struct pci_bus *b;
-
-	/* Allocate and assign resources. If we re-assign everything, then
-	 * we skip the allocate phase
-	 */
-	list_for_each_entry(b, &pci_root_buses, node)
-		pcibios_allocate_bus_resources(b);
-
-	pcibios_allocate_resources(0);
-	pcibios_allocate_resources(1);
-
-	/* Before we start assigning unassigned resource, we try to reserve
-	 * the low IO area and the VGA memory area if they intersect the
-	 * bus available resources to avoid allocating things on top of them
-	 */
-	list_for_each_entry(b, &pci_root_buses, node)
-		pcibios_reserve_legacy_regions(b);
-
-	/* Now proceed to assigning things that were left unassigned */
-	pr_debug("PCI: Assigning unassigned resources...\n");
-	pci_assign_unassigned_resources();
-}
-
-static void pcibios_setup_phb_resources(struct pci_controller *hose,
-					struct list_head *resources)
-{
-	unsigned long io_offset;
-	struct resource *res;
-	int i;
-
-	/* Hookup PHB IO resource */
-	res = &hose->io_resource;
-
-	/* Fixup IO space offset */
-	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	res->start = (res->start + io_offset) & 0xffffffffu;
-	res->end = (res->end + io_offset) & 0xffffffffu;
-
-	if (!res->flags) {
-		pr_warn("PCI: I/O resource not set for host ");
-		pr_cont("bridge %pOF (domain %d)\n",
-			hose->dn, hose->global_number);
-		/* Workaround for lack of IO resource only on 32-bit */
-		res->start = (unsigned long)hose->io_base_virt - isa_io_base;
-		res->end = res->start + IO_SPACE_LIMIT;
-		res->flags = IORESOURCE_IO;
-	}
-	pci_add_resource_offset(resources, res,
-		(__force resource_size_t)(hose->io_base_virt - _IO_BASE));
-
-	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
-		 (unsigned long long)res->start,
-		 (unsigned long long)res->end,
-		 (unsigned long)res->flags);
-
-	/* Hookup PHB Memory resources */
-	for (i = 0; i < 3; ++i) {
-		res = &hose->mem_resources[i];
-		if (!res->flags) {
-			if (i > 0)
-				continue;
-			pr_err("PCI: Memory resource 0 not set for ");
-			pr_cont("host bridge %pOF (domain %d)\n",
-				hose->dn, hose->global_number);
-
-			/* Workaround for lack of MEM resource only on 32-bit */
-			res->start = hose->pci_mem_offset;
-			res->end = (resource_size_t)-1LL;
-			res->flags = IORESOURCE_MEM;
-
-		}
-		pci_add_resource_offset(resources, res, hose->pci_mem_offset);
-
-		pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
-			i, (unsigned long long)res->start,
-			(unsigned long long)res->end,
-			(unsigned long)res->flags);
-	}
-
-	pr_debug("PCI: PHB MEM offset     = %016llx\n",
-		 (unsigned long long)hose->pci_mem_offset);
-	pr_debug("PCI: PHB IO  offset     = %08lx\n",
-		 (unsigned long)hose->io_base_virt - _IO_BASE);
-}
-
-static void pcibios_scan_phb(struct pci_controller *hose)
-{
-	LIST_HEAD(resources);
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
-
-	pr_debug("PCI: Scanning PHB %pOF\n", node);
-
-	pcibios_setup_phb_resources(hose, &resources);
-
-	bus = pci_scan_root_bus(hose->parent, hose->first_busno,
-				hose->ops, hose, &resources);
-	if (bus == NULL) {
-		pr_err("Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		pci_free_resource_list(&resources);
-		return;
-	}
-	bus->busn_res.start = hose->first_busno;
-	hose->bus = bus;
-
-	hose->last_busno = bus->busn_res.end;
-}
-
-static int __init pcibios_init(void)
-{
-	struct pci_controller *hose, *tmp;
-	int next_busno = 0;
-
-	pr_info("PCI: Probing PCI hardware\n");
-
-	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose);
-		if (next_busno <= hose->last_busno)
-			next_busno = hose->last_busno + 1;
-	}
-	pci_bus_count = next_busno;
-
-	/* Call common code to handle resource allocation */
-	pcibios_resource_survey();
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		if (hose->bus)
-			pci_bus_add_devices(hose->bus);
-	}
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-static struct pci_controller *pci_bus_to_hose(int bus)
-{
-	struct pci_controller *hose, *tmp;
-
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	return NULL;
-}
-
-/* Provide information on locations of various I/O regions in physical
- * memory.  Do this on a per-card basis so that we choose the right
- * root bridge.
- * Note that the returned IO or memory base is a physical address
- */
-
-long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
-{
-	struct pci_controller *hose;
-	long result = -EOPNOTSUPP;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return -ENODEV;
-
-	switch (which) {
-	case IOBASE_BRIDGE_NUMBER:
-		return (long)hose->first_busno;
-	case IOBASE_MEMORY:
-		return (long)hose->pci_mem_offset;
-	case IOBASE_IO:
-		return (long)hose->io_base_phys;
-	case IOBASE_ISA_IO:
-		return (long)isa_io_base;
-	case IOBASE_ISA_MEM:
-		return (long)isa_mem_base;
-	}
-
-	return result;
-}
-
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops = {
-	.read = null_read_config,
-	.write = null_write_config,
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (!hose)
-		pr_err("Can't find hose for PCI bus %d!\n", busnr);
-
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose ? hose->ops : &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
-			  int cap)
-{
-	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
deleted file mode 100644
index f4cb86fffcee..000000000000
--- a/arch/microblaze/pci/xilinx_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * PCI support for Xilinx plbv46_pci soft-core which can be used on
- * Xilinx Virtex ML410 / ML510 boards.
- *
- * Copyright 2009 Roderick Colenbrander
- * Copyright 2009 Secret Lab Technologies Ltd.
- *
- * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
- * by Benjamin Herrenschmidt.
- * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-
-#define XPLB_PCI_ADDR 0x10c
-#define XPLB_PCI_DATA 0x110
-#define XPLB_PCI_BUS  0x114
-
-#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
-				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
-
-static const struct of_device_id xilinx_pci_match[] = {
-	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
-	{}
-};
-
-/**
- * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
- */
-static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
-{
-	struct pci_controller *hose;
-	int i;
-
-	if (dev->devfn || dev->bus->self)
-		return;
-
-	hose = pci_bus_to_host(dev->bus);
-	if (!hose)
-		return;
-
-	if (!of_match_node(xilinx_pci_match, hose->dn))
-		return;
-
-	/* Hide the PCI host BARs from the kernel as their content doesn't
-	 * fit well in the resource management
-	 */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		dev->resource[i].start = 0;
-		dev->resource[i].end = 0;
-		dev->resource[i].flags = 0;
-	}
-
-	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
-		 pci_name(dev));
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
-
-#ifdef DEBUG
-/**
- * xilinx_pci_exclude_device - Don't do config access for non-root bus
- *
- * This is a hack.  Config access to any bus other than bus 0 does not
- * currently work on the ML510 so we prevent it here.
- */
-static int
-xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
-{
-	return (bus != 0);
-}
-
-/**
- * xilinx_early_pci_scan - List pci config space for available devices
- *
- * List pci devices in very early phase.
- */
-static void __init xilinx_early_pci_scan(struct pci_controller *hose)
-{
-	u32 bus = 0;
-	u32 val, dev, func, offset;
-
-	/* Currently we have only 2 device connected - up-to 32 devices */
-	for (dev = 0; dev < 2; dev++) {
-		/* List only first function number - up-to 8 functions */
-		for (func = 0; func < 1; func++) {
-			pr_info("%02x:%02x:%02x", bus, dev, func);
-			/* read the first 64 standardized bytes */
-			/* Up-to 192 bytes can be list of capabilities */
-			for (offset = 0; offset < 64; offset += 4) {
-				early_read_config_dword(hose, bus,
-					PCI_DEVFN(dev, func), offset, &val);
-				if (offset == 0 && val == 0xFFFFFFFF) {
-					pr_cont("\nABSENT");
-					break;
-				}
-				if (!(offset % 0x10))
-					pr_cont("\n%04x:    ", offset);
-
-				pr_cont("%08x  ", val);
-			}
-			pr_info("\n");
-		}
-	}
-}
-#else
-static void __init xilinx_early_pci_scan(struct pci_controller *hose)
-{
-}
-#endif
-
-/**
- * xilinx_pci_init - Find and register a Xilinx PCI host bridge
- */
-void __init xilinx_pci_init(void)
-{
-	struct pci_controller *hose;
-	struct resource r;
-	void __iomem *pci_reg;
-	struct device_node *pci_node;
-
-	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
-	if (!pci_node)
-		return;
-
-	if (of_address_to_resource(pci_node, 0, &r)) {
-		pr_err("xilinx-pci: cannot resolve base address\n");
-		return;
-	}
-
-	hose = pcibios_alloc_controller(pci_node);
-	if (!hose) {
-		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
-		return;
-	}
-
-	/* Setup config space */
-	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
-			   r.start + XPLB_PCI_DATA,
-			   INDIRECT_TYPE_SET_CFG_TYPE);
-
-	/* According to the xilinx plbv46_pci documentation the soft-core starts
-	 * a self-init when the bus master enable bit is set. Without this bit
-	 * set the pci bus can't be scanned.
-	 */
-	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
-
-	/* Set the max latency timer to 255 */
-	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
-
-	/* Set the max bus number to 255, and bus/subbus no's to 0 */
-	pci_reg = of_iomap(pci_node, 0);
-	WARN_ON(!pci_reg);
-	out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
-	iounmap(pci_reg);
-
-	/* Register the host bridge with the linux kernel! */
-	pci_process_bridge_OF_ranges(hose, pci_node,
-					INDIRECT_TYPE_SET_CFG_TYPE);
-
-	pr_info("xilinx-pci: Registered PCI host bridge\n");
-	xilinx_early_pci_scan(hose);
-}
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index b296e33f8e33..490dea07d4e0 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -318,7 +318,7 @@ KBUILD_LDFLAGS		+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
+	grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 endif
 
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6e6756e8fa0a..86a6e2590866 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -361,6 +361,8 @@ static struct clk clk_periph = {
  */
 int clk_enable(struct clk *clk)
 {
+	if (!clk)
+		return 0;
 	mutex_lock(&clocks_mutex);
 	clk_enable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index 8926417a8fbc..c663efce91cf 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -110,6 +110,11 @@
 			reg = <0x10000080 0x30>;
 			ranges = <0x0 0x10000080 0x30>;
 
+			timer@0 {
+				compatible = "brcm,bcm6345-timer";
+				reg = <0x0 0x1c>;
+			};
+
 			wdt: watchdog@1c {
 				compatible = "brcm,bcm7038-wdt";
 				reg = <0x1c 0xc>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index 8c001b944c8b..cfdf9804e126 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -422,6 +422,7 @@
 			reg = <0x41c800 0x600>, <0x41d000 0x100>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
 			status = "disabled";
 		};
 
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 37c46720c719..f38c39572a9e 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -438,7 +438,7 @@
 		ingenic,nemc-tAW = <50>;
 		ingenic,nemc-tSTRV = <100>;
 
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
index 0ea7bc5b5746..1813f4e32e55 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
@@ -208,7 +208,7 @@
 };
 
 &i2c0 {
-	pca9545@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -236,7 +236,7 @@
 			reg = <3>;
 		};
 	};
-	pca9545@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index c4102b280b47..768ac0f869b1 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -176,7 +176,6 @@
 
 						switch_port0: port@0 {
 							reg = <0x0>;
-							label = "cpu";
 							ethernet = <&eth1>;
 
 							phy-mode = "gmii";
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index 7515555388ae..e31417569e09 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -113,13 +113,13 @@
 
 &gmac1 {
 	status = "okay";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy5>;
 };
 
 &mdio {
 	ethphy5: ethernet-phy@5 {
 		reg = <5>;
-		phy-mode = "rgmii-rxid";
 	};
 };
 
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index f3f4c1f26e01..aec85c779359 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -357,36 +357,35 @@
 					port@0 {
 						status = "disabled";
 						reg = <0>;
-						label = "lan0";
+						label = "swp0";
 					};
 
 					port@1 {
 						status = "disabled";
 						reg = <1>;
-						label = "lan1";
+						label = "swp1";
 					};
 
 					port@2 {
 						status = "disabled";
 						reg = <2>;
-						label = "lan2";
+						label = "swp2";
 					};
 
 					port@3 {
 						status = "disabled";
 						reg = <3>;
-						label = "lan3";
+						label = "swp3";
 					};
 
 					port@4 {
 						status = "disabled";
 						reg = <4>;
-						label = "lan4";
+						label = "swp4";
 					};
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
 						ethernet = <&gmac0>;
 						phy-mode = "trgmii";
 
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 306cee07ce3f..334bf8e577e5 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -780,9 +780,8 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
 	if (addr_allocated >= 0) {
 		named_block_desc_ptr->base_addr = addr_allocated;
 		named_block_desc_ptr->size = size;
-		strncpy(named_block_desc_ptr->name, name,
+		strscpy(named_block_desc_ptr->name, name,
 			cvmx_bootmem_desc->named_block_name_len);
-		named_block_desc_ptr->name[cvmx_bootmem_desc->named_block_name_len - 1] = 0;
 	}
 
 	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index d09d0769f549..0fd9ac76eb74 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -211,7 +211,7 @@ union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port)
 {
 	union cvmx_helper_link_info result;
 
-	WARN(!octeon_is_simulation(),
+	WARN_ONCE(!octeon_is_simulation(),
 	     "Using deprecated link status - please update your DT");
 
 	/* Unless we fix it later, all links are defaulted to down */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 6f49fd9be1f3..9abfc4bf9bd8 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -1096,7 +1096,7 @@ union cvmx_helper_link_info cvmx_helper_link_get(int ipd_port)
 		if (index == 0)
 			result = __cvmx_helper_rgmii_link_get(ipd_port);
 		else {
-			WARN(1, "Using deprecated link status - please update your DT");
+			WARN_ONCE(1, "Using deprecated link status - please update your DT");
 			result.s.full_duplex = 1;
 			result.s.link_up = 1;
 			result.s.speed = 1000;
diff --git a/arch/mips/include/asm/asm-prototypes.h b/arch/mips/include/asm/asm-prototypes.h
index f901ed043c71..8e8fc38b0941 100644
--- a/arch/mips/include/asm/asm-prototypes.h
+++ b/arch/mips/include/asm/asm-prototypes.h
@@ -6,3 +6,6 @@
 #include <linux/uaccess.h>
 #include <asm/ftrace.h>
 #include <asm/mmu_context.h>
+
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
index 6bbf082dd149..79d5bb0e06d6 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -7,10 +7,12 @@
 #ifndef _MT7621_REGS_H_
 #define _MT7621_REGS_H_
 
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+
 #define MT7621_PALMBUS_BASE		0x1C000000
 #define MT7621_PALMBUS_SIZE		0x03FFFFFF
 
-#define MT7621_SYSC_BASE		0x1E000000
+#define MT7621_SYSC_BASE		IOMEM(0x1E000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 6caec386ad2f..4678627673df 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -622,6 +622,7 @@ static inline pmd_t pmd_mkdirty(pmd_t pmd)
 	return pmd;
 }
 
+#define pmd_young pmd_young
 static inline int pmd_young(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & _PAGE_ACCESSED);
diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c
index e673603e11e5..92140edb3ce3 100644
--- a/arch/mips/kernel/vpe-cmp.c
+++ b/arch/mips/kernel/vpe-cmp.c
@@ -75,7 +75,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -157,6 +156,7 @@ out_dev:
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -169,7 +169,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
index bad6b0891b2b..84a82b551ec3 100644
--- a/arch/mips/kernel/vpe-mt.c
+++ b/arch/mips/kernel/vpe-mt.c
@@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -497,6 +496,7 @@ out_dev:
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -509,7 +509,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index e07ae098bdd8..d59888aaed81 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -404,7 +404,6 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	struct rt3883_pci_controller *rpc;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct resource *res;
 	struct device_node *child;
 	u32 val;
 	int err;
@@ -414,8 +413,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	if (!rpc)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	rpc->base = devm_ioremap_resource(dev, res);
+	rpc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(rpc->base))
 		return PTR_ERR(rpc->base);
 
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index fb0565bc34fd..bbf5811afbf2 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -25,6 +25,7 @@
 #define MT7621_MEM_TEST_PATTERN         0xaa5555aa
 
 static u32 detect_magic __initdata;
+static struct ralink_soc_info *soc_info_ptr;
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
@@ -97,41 +98,83 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
+static unsigned int __init mt7621_get_soc_name0(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7621_get_soc_name1(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7621_soc_valid(void)
+{
+	if (mt7621_get_soc_name0() == MT7621_CHIP_NAME0 &&
+			mt7621_get_soc_name1() == MT7621_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *mt7621_get_soc_id(void)
+{
+	if (mt7621_soc_valid())
+		return "MT7621";
+	else
+		return "invalid";
+}
+
+static unsigned int __init mt7621_get_soc_rev(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7621_get_soc_ver(void)
+{
+	return (mt7621_get_soc_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
+
+static unsigned int __init mt7621_get_soc_eco(void)
+{
+	return (mt7621_get_soc_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7621_get_soc_revision(void)
+{
+	if (mt7621_get_soc_rev() == 1 && mt7621_get_soc_eco() == 1)
+		return "E2";
+	else
+		return "E1";
+}
+
+static int __init mt7621_soc_dev_init(void)
 {
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 	if (!soc_dev_attr)
-		return;
+		return -ENOMEM;
 
 	soc_dev_attr->soc_id = "mt7621";
 	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->revision = mt7621_get_soc_revision();
 
-	if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 &&
-	    (rev & CHIP_REV_ECO_MASK) == 1)
-		soc_dev_attr->revision = "E2";
-	else
-		soc_dev_attr->revision = "E1";
-
-	soc_dev_attr->data = soc_info;
+	soc_dev_attr->data = soc_info_ptr;
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
-		return;
+		return PTR_ERR(soc_dev);
 	}
+
+	return 0;
 }
+device_initcall(mt7621_soc_dev_init);
 
 void __init prom_soc_init(struct ralink_soc_info *soc_info)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
-	unsigned char *name = NULL;
-	u32 n0;
-	u32 n1;
-	u32 rev;
-
 	/* Early detection of CMP support */
 	mips_cm_probe();
 	mips_cpc_probe();
@@ -154,27 +197,23 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		__sync();
 	}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-
-	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
-		name = "MT7621";
+	if (mt7621_soc_valid())
 		soc_info->compatible = "mediatek,mt7621-soc";
-	} else {
-		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-	}
+	else
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n",
+				mt7621_get_soc_name0(),
+				mt7621_get_soc_name1());
 	ralink_soc = MT762X_SOC_MT7621AT;
-	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"MediaTek %s ver:%u eco:%u",
-		name,
-		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-		(rev & CHIP_REV_ECO_MASK));
+		mt7621_get_soc_id(),
+		mt7621_get_soc_ver(),
+		mt7621_get_soc_eco());
 
 	soc_info->mem_detect = mt7621_memory_detect;
 
-	soc_dev_init(soc_info, rev);
+	soc_info_ptr = soc_info;
 
 	if (!register_cps_smp_ops())
 		return;
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index f72658b3a53f..1f7d5c6c10b0 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -71,7 +71,7 @@ KCOV_INSTRUMENT := n
 
 # Check that we don't have PIC 'jalr t9' calls left
 quiet_cmd_vdso_mips_check = VDSOCHK $@
-      cmd_vdso_mips_check = if $(OBJDUMP) --disassemble $@ | egrep -h "jalr.*t9" > /dev/null; \
+      cmd_vdso_mips_check = if $(OBJDUMP) --disassemble $@ | grep -E -h "jalr.*t9" > /dev/null; \
 		       then (echo >&2 "$@: PIC 'jalr t9' calls are not supported"; \
 			     rm -f $@; /bin/false); fi
 
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 8c3ad76602f3..29c11a06b750 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -20,7 +20,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
+$(obj)/vmImage: $(obj)/vmlinux.gz FORCE
 	$(call if_changed,uimage)
 	@$(kecho) 'Kernel: $@ is ready'
 
diff --git a/arch/openrisc/configs/or1ksim_defconfig b/arch/openrisc/configs/or1ksim_defconfig
index 6e1e004047c7..0116e465238f 100644
--- a/arch/openrisc/configs/or1ksim_defconfig
+++ b/arch/openrisc/configs/or1ksim_defconfig
@@ -10,7 +10,8 @@ CONFIG_EXPERT=y
 # CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_MODULES=y
 # CONFIG_BLOCK is not set
 CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
index ff49d868e040..b990cb6c9309 100644
--- a/arch/openrisc/configs/simple_smp_defconfig
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -16,7 +16,8 @@ CONFIG_EXPERT=y
 # CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_MODULES=y
 # CONFIG_BLOCK is not set
 CONFIG_OPENRISC_BUILTIN_DTB="simple_smp"
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 3cee7115441b..259b9dd5fe1c 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -37,12 +37,32 @@ static __always_inline struct pt_regs *arch_ftrace_get_regs(struct ftrace_regs *
 	return fregs->regs.msr ? &fregs->regs : NULL;
 }
 
-static __always_inline void ftrace_instruction_pointer_set(struct ftrace_regs *fregs,
-							   unsigned long ip)
+static __always_inline void
+ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
+				    unsigned long ip)
 {
 	regs_set_return_ip(&fregs->regs, ip);
 }
 
+static __always_inline unsigned long
+ftrace_regs_get_instruction_pointer(struct ftrace_regs *fregs)
+{
+	return instruction_pointer(&fregs->regs);
+}
+
+#define ftrace_regs_get_argument(fregs, n) \
+	regs_get_kernel_argument(&(fregs)->regs, n)
+#define ftrace_regs_get_stack_pointer(fregs) \
+	kernel_stack_pointer(&(fregs)->regs)
+#define ftrace_regs_return_value(fregs) \
+	regs_return_value(&(fregs)->regs)
+#define ftrace_regs_set_return_value(fregs, ret) \
+	regs_set_return_value(&(fregs)->regs, ret)
+#define ftrace_override_function_with_return(fregs) \
+	override_function_with_return(&(fregs)->regs)
+#define ftrace_regs_query_register_offset(name) \
+	regs_query_register_offset(name)
+
 struct ftrace_ops;
 
 #define ftrace_graph_func ftrace_graph_func
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 4745bb9998bd..6d8492b6e2b8 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -602,6 +602,7 @@ ____##func(struct pt_regs *regs)
 /* kernel/traps.c */
 DECLARE_INTERRUPT_HANDLER_NMI(system_reset_exception);
 #ifdef CONFIG_PPC_BOOK3S_64
+DECLARE_INTERRUPT_HANDLER_RAW(machine_check_early_boot);
 DECLARE_INTERRUPT_HANDLER_ASYNC(machine_check_exception_async);
 #endif
 DECLARE_INTERRUPT_HANDLER_NMI(machine_check_exception);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 4abc01949702..507f8228f983 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -129,28 +129,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 
 	return 0;
 }
-
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_mm == current->mm))
-		return current->nsproxy->time_ns->vvar_page;
-
-	/*
-	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
-	 * through interfaces like /proc/$pid/mem or
-	 * process_vm_{readv,writev}() as long as there's no .access()
-	 * in special_mapping_vmops.
-	 * For more details check_vma_flags() and __access_remote_vm()
-	 */
-	WARN(1, "vvar_page accessed remotely");
-
-	return NULL;
-}
-#else
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	return NULL;
-}
 #endif
 
 static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 7786e3ac7611..8c3862b4c259 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -142,7 +142,7 @@ SECTIONS
 #endif
 
 	.data.rel.ro : AT(ADDR(.data.rel.ro) - LOAD_OFFSET) {
-		*(.data.rel.ro*)
+		*(.data.rel.ro .data.rel.ro.*)
 	}
 
 	.branch_lt : AT(ADDR(.branch_lt) - LOAD_OFFSET) {
diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
index 43f1c76d48ce..a379b0ce19ff 100644
--- a/arch/powerpc/net/bpf_jit_comp32.c
+++ b/arch/powerpc/net/bpf_jit_comp32.c
@@ -113,23 +113,19 @@ void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx)
 {
 	int i;
 
-	/* First arg comes in as a 32 bits pointer. */
-	EMIT(PPC_RAW_MR(bpf_to_ppc(BPF_REG_1), _R3));
-	EMIT(PPC_RAW_LI(bpf_to_ppc(BPF_REG_1) - 1, 0));
+	/* Initialize tail_call_cnt, to be skipped if we do tail calls. */
+	EMIT(PPC_RAW_LI(_R4, 0));
+
+#define BPF_TAILCALL_PROLOGUE_SIZE	4
+
 	EMIT(PPC_RAW_STWU(_R1, _R1, -BPF_PPC_STACKFRAME(ctx)));
 
-	/*
-	 * Initialize tail_call_cnt in stack frame if we do tail calls.
-	 * Otherwise, put in NOPs so that it can be skipped when we are
-	 * invoked through a tail call.
-	 */
 	if (ctx->seen & SEEN_TAILCALL)
-		EMIT(PPC_RAW_STW(bpf_to_ppc(BPF_REG_1) - 1, _R1,
-				 bpf_jit_stack_offsetof(ctx, BPF_PPC_TC)));
-	else
-		EMIT(PPC_RAW_NOP());
+		EMIT(PPC_RAW_STW(_R4, _R1, bpf_jit_stack_offsetof(ctx, BPF_PPC_TC)));
 
-#define BPF_TAILCALL_PROLOGUE_SIZE	16
+	/* First arg comes in as a 32 bits pointer. */
+	EMIT(PPC_RAW_MR(bpf_to_ppc(BPF_REG_1), _R3));
+	EMIT(PPC_RAW_LI(bpf_to_ppc(BPF_REG_1) - 1, 0));
 
 	/*
 	 * We need a stack frame, but we don't necessarily need to
@@ -170,24 +166,24 @@ static void bpf_jit_emit_common_epilogue(u32 *image, struct codegen_context *ctx
 	for (i = BPF_PPC_NVR_MIN; i <= 31; i++)
 		if (bpf_is_seen_register(ctx, i))
 			EMIT(PPC_RAW_LWZ(i, _R1, bpf_jit_stack_offsetof(ctx, i)));
-}
-
-void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
-{
-	EMIT(PPC_RAW_MR(_R3, bpf_to_ppc(BPF_REG_0)));
-
-	bpf_jit_emit_common_epilogue(image, ctx);
-
-	/* Tear down our stack frame */
 
 	if (ctx->seen & SEEN_FUNC)
 		EMIT(PPC_RAW_LWZ(_R0, _R1, BPF_PPC_STACKFRAME(ctx) + PPC_LR_STKOFF));
 
+	/* Tear down our stack frame */
 	EMIT(PPC_RAW_ADDI(_R1, _R1, BPF_PPC_STACKFRAME(ctx)));
 
 	if (ctx->seen & SEEN_FUNC)
 		EMIT(PPC_RAW_MTLR(_R0));
 
+}
+
+void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
+{
+	EMIT(PPC_RAW_MR(_R3, bpf_to_ppc(BPF_REG_0)));
+
+	bpf_jit_emit_common_epilogue(image, ctx);
+
 	EMIT(PPC_RAW_BLR());
 }
 
@@ -244,7 +240,6 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o
 	EMIT(PPC_RAW_RLWINM(_R3, b2p_index, 2, 0, 29));
 	EMIT(PPC_RAW_ADD(_R3, _R3, b2p_bpf_array));
 	EMIT(PPC_RAW_LWZ(_R3, _R3, offsetof(struct bpf_array, ptrs)));
-	EMIT(PPC_RAW_STW(_R0, _R1, bpf_jit_stack_offsetof(ctx, BPF_PPC_TC)));
 
 	/*
 	 * if (prog == NULL)
@@ -255,19 +250,14 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o
 
 	/* goto *(prog->bpf_func + prologue_size); */
 	EMIT(PPC_RAW_LWZ(_R3, _R3, offsetof(struct bpf_prog, bpf_func)));
-
-	if (ctx->seen & SEEN_FUNC)
-		EMIT(PPC_RAW_LWZ(_R0, _R1, BPF_PPC_STACKFRAME(ctx) + PPC_LR_STKOFF));
-
 	EMIT(PPC_RAW_ADDIC(_R3, _R3, BPF_TAILCALL_PROLOGUE_SIZE));
-
-	if (ctx->seen & SEEN_FUNC)
-		EMIT(PPC_RAW_MTLR(_R0));
-
 	EMIT(PPC_RAW_MTCTR(_R3));
 
 	EMIT(PPC_RAW_MR(_R3, bpf_to_ppc(BPF_REG_1)));
 
+	/* Put tail_call_cnt in r4 */
+	EMIT(PPC_RAW_MR(_R4, _R0));
+
 	/* tear restore NVRs, ... */
 	bpf_jit_emit_common_epilogue(image, ctx);
 
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 942aa830e110..bf318dd9b709 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -132,7 +132,7 @@ static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
 
 static inline void power_pmu_bhrb_enable(struct perf_event *event) {}
 static inline void power_pmu_bhrb_disable(struct perf_event *event) {}
-static void power_pmu_sched_task(struct perf_event_context *ctx, bool sched_in) {}
+static void power_pmu_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in) {}
 static inline void power_pmu_bhrb_read(struct perf_event *event, struct cpu_hw_events *cpuhw) {}
 static void pmao_restore_workaround(bool ebb) { }
 #endif /* CONFIG_PPC32 */
@@ -424,7 +424,7 @@ static void power_pmu_bhrb_enable(struct perf_event *event)
 		cpuhw->bhrb_context = event->ctx;
 	}
 	cpuhw->bhrb_users++;
-	perf_sched_cb_inc(event->ctx->pmu);
+	perf_sched_cb_inc(event->pmu);
 }
 
 static void power_pmu_bhrb_disable(struct perf_event *event)
@@ -436,7 +436,7 @@ static void power_pmu_bhrb_disable(struct perf_event *event)
 
 	WARN_ON_ONCE(!cpuhw->bhrb_users);
 	cpuhw->bhrb_users--;
-	perf_sched_cb_dec(event->ctx->pmu);
+	perf_sched_cb_dec(event->pmu);
 
 	if (!cpuhw->disabled && !cpuhw->bhrb_users) {
 		/* BHRB cannot be turned off when other
@@ -451,7 +451,7 @@ static void power_pmu_bhrb_disable(struct perf_event *event)
 /* Called from ctxsw to prevent one process's branch entries to
  * mingle with the other process's entries during context switch.
  */
-static void power_pmu_sched_task(struct perf_event_context *ctx, bool sched_in)
+static void power_pmu_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	if (!ppmu->bhrb_nr)
 		return;
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index a3a71d37cb9a..3f05507e444d 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -447,21 +447,18 @@ static void pseries_msi_ops_msi_free(struct irq_domain *domain,
  * RTAS can not disable one MSI at a time. It's all or nothing. Do it
  * at the end after all IRQs have been freed.
  */
-static void pseries_msi_domain_free_irqs(struct irq_domain *domain,
-					 struct device *dev)
+static void pseries_msi_post_free(struct irq_domain *domain, struct device *dev)
 {
 	if (WARN_ON_ONCE(!dev_is_pci(dev)))
 		return;
 
-	__msi_domain_free_irqs(domain, dev);
-
 	rtas_disable_msi(to_pci_dev(dev));
 }
 
 static struct msi_domain_ops pseries_pci_msi_domain_ops = {
 	.msi_prepare	= pseries_msi_ops_prepare,
 	.msi_free	= pseries_msi_ops_msi_free,
-	.domain_free_irqs = pseries_msi_domain_free_irqs,
+	.msi_post_free	= pseries_msi_post_free,
 };
 
 static void pseries_msi_shutdown(struct irq_data *d)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fa78595a6089..593cf09264d8 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -317,9 +317,9 @@ config SMP
 config NR_CPUS
 	int "Maximum number of CPUs (2-512)"
 	depends on SMP
-	range 2 512 if !SBI_V01
-	range 2 32 if SBI_V01 && 32BIT
-	range 2 64 if SBI_V01 && 64BIT
+	range 2 512 if !RISCV_SBI_V01
+	range 2 32 if RISCV_SBI_V01 && 32BIT
+	range 2 64 if RISCV_SBI_V01 && 64BIT
 	default "32" if 32BIT
 	default "64" if 64BIT
 
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 69774bb362d6..75fb0390d6bd 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -7,6 +7,11 @@ config SOC_MICROCHIP_POLARFIRE
 	help
 	  This enables support for Microchip PolarFire SoC platforms.
 
+config ARCH_RENESAS
+	bool "Renesas RISC-V SoCs"
+	help
+	  This enables support for the RISC-V based Renesas SoCs.
+
 config SOC_SIFIVE
 	bool "SiFive SoCs"
 	select SERIAL_SIFIVE if TTY
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index ff174996cdfd..b0ff5fbabb0c 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -3,5 +3,6 @@ subdir-y += sifive
 subdir-y += starfive
 subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
 subdir-y += microchip
+subdir-y += renesas
 
 obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index 24b1cfb9a73e..1069134f2e12 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -9,8 +9,8 @@
 		compatible = "microchip,corepwm-rtl-v4";
 		reg = <0x0 0x40000000 0x0 0xF0>;
 		microchip,sync-update-mask = /bits/ 32 <0>;
-		#pwm-cells = <2>;
-		clocks = <&fabric_clk3>;
+		#pwm-cells = <3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		status = "disabled";
 	};
 
@@ -19,25 +19,13 @@
 		reg = <0x0 0x40000200 0x0 0x100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&fabric_clk3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		interrupt-parent = <&plic>;
 		interrupts = <122>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	fabric_clk3: fabric-clk3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	fabric_clk1: fabric-clk1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-	};
-
 	pcie: pcie@3000000000 {
 		compatible = "microchip,pcie-host-1.0";
 		#address-cells = <0x3>;
@@ -54,7 +42,7 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
 		clock-names = "fic1", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
 		dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
@@ -67,4 +55,17 @@
 			interrupt-controller;
 		};
 	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index ec7b7c2a3ce2..90b261114763 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -5,6 +5,8 @@
 
 #include "mpfs.dtsi"
 #include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 /* Clock frequency (in Hz) of the rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -31,13 +33,41 @@
 		timebase-frequency = <RTCCLK_FREQ>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
 	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;
 		status = "okay";
 	};
 
-	ddrc_cache_hi: memory@1000000000 {
+	ddrc_cache_hi: memory@1040000000 {
 		device_type = "memory";
 		reg = <0x10 0x40000000 0x0 0x40000000>;
 		status = "okay";
@@ -149,6 +179,10 @@
 	clock-frequency = <125000000>;
 };
 
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
index 7b9ee13b6a3a..8230f06ddf48 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
@@ -30,8 +30,8 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
 		msi-parent = <&pcie>;
 		msi-controller;
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
index 67303bc0e451..9a56de7b91d6 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -30,8 +30,8 @@
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
 		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
 		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
 		msi-parent = <&pcie>;
 		msi-controller;
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
index 8545baf4d129..39a77df489ab 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
@@ -13,33 +13,4 @@
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
-
-	pcie: pcie@2000000000 {
-		compatible = "microchip,pcie-host-1.0";
-		#address-cells = <0x3>;
-		#interrupt-cells = <0x1>;
-		#size-cells = <0x2>;
-		device_type = "pci";
-		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
-		reg-names = "cfg", "apb";
-		bus-range = <0x0 0x7f>;
-		interrupt-parent = <&plic>;
-		interrupts = <119>;
-		interrupt-map = <0 0 0 1 &pcie_intc 0>,
-				<0 0 0 2 &pcie_intc 1>,
-				<0 0 0 3 &pcie_intc 2>,
-				<0 0 0 4 &pcie_intc 3>;
-		interrupt-map-mask = <0 0 0 7>;
-		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-		clock-names = "fic0", "fic1", "fic3";
-		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
-		msi-parent = <&pcie>;
-		msi-controller;
-		status = "disabled";
-		pcie_intc: interrupt-controller {
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-	};
 };
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 8f463399a568..0a9bb84af438 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -236,6 +236,38 @@
 			#clock-cells = <1>;
 		};
 
+		ccc_se: clock-controller@38010000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+			      <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_ne: clock-controller@38040000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+			      <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_nw: clock-controller@38100000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+			      <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_sw: clock-controller@38400000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+			      <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
 		mmuart0: serial@20000000 {
 			compatible = "ns16550a";
 			reg = <0x0 0x20000000 0x0 0x400>;
diff --git a/arch/riscv/boot/dts/renesas/Makefile b/arch/riscv/boot/dts/renesas/Makefile
new file mode 100644
index 000000000000..2d3f5751a649
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043f01-smarc.dtb
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
new file mode 100644
index 000000000000..6ec1c6f9a403
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)	(nr + 32)
+
+#include <arm64/renesas/r9a07g043.dtsi>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <12000000>;
+
+		cpu0: cpu@0 {
+			compatible = "andestech,ax45mp", "riscv";
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			reg = <0x0>;
+			status = "okay";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,sv39";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <0x40>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <0x40>;
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+};
+
+&soc {
+	interrupt-parent = <&plic>;
+
+	plic: interrupt-controller@12c00000 {
+		compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		riscv,ndev = <511>;
+		interrupt-controller;
+		reg = <0x0 0x12c00000 0 0x400000>;
+		clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+		interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+	};
+};
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts
new file mode 100644
index 000000000000..2aa8515451d3
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N		(0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL	1
+#define SW_ET0_EN_N	1
+
+#include "r9a07g043f.dtsi"
+#include "rzfive-smarc-som.dtsi"
+#include "rzfive-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g043f01";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043";
+};
diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
new file mode 100644
index 000000000000..2b7672bc4b52
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK SOM
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc-som.dtsi>
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+	};
+};
+
+&dmac {
+	status = "disabled";
+};
+
+&eth0 {
+	status = "disabled";
+};
+
+&eth1 {
+	status = "disabled";
+};
+
+&ostm1 {
+	status = "disabled";
+};
+
+&ostm2 {
+	status = "disabled";
+};
+
+&sdhi0 {
+	status = "disabled";
+};
+
+&wdt0 {
+	status = "disabled";
+};
diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
new file mode 100644
index 000000000000..c07a487c4e5a
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK carrier board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc.dtsi>
+
+&ehci0 {
+	status = "disabled";
+};
+
+&ehci1 {
+	status = "disabled";
+};
+
+&hsusb {
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&ohci1 {
+	status = "disabled";
+};
+
+&phyrst {
+	status = "disabled";
+};
+
+&sdhi1 {
+	status = "disabled";
+};
+
+&snd_rzg2l {
+	status = "disabled";
+};
+
+&spi1 {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "disabled";
+};
+
+&usb0_vbus_otg {
+	status = "disabled";
+};
+
+&usb2_phy0 {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	status = "disabled";
+};
+
+&vccq_sdhi1 {
+	status = "disabled";
+};
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 0ea1bc15ab30..039c143cba33 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index f7a230110512..7cda3a89020a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -5,160 +5,9 @@
  */
 
 /dts-v1/;
-#include "jh7100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+#include "jh7100-common.dtsi"
 
 / {
 	model = "BeagleV Starlight Beta";
 	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
-	aliases {
-		serial0 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <6250000>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x2 0x0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-ack {
-			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_HEARTBEAT;
-			linux,default-trigger = "heartbeat";
-			label = "ack";
-		};
-	};
-};
-
-&gpio {
-	i2c0_pins: i2c0-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(62, GPO_LOW,
-				  GPO_I2C0_PAD_SCK_OEN,
-				  GPI_I2C0_PAD_SCK_IN)>,
-				 <GPIOMUX(61, GPO_LOW,
-				  GPO_I2C0_PAD_SDA_OEN,
-				  GPI_I2C0_PAD_SDA_IN)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c1_pins: i2c1-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(47, GPO_LOW,
-				  GPO_I2C1_PAD_SCK_OEN,
-				  GPI_I2C1_PAD_SCK_IN)>,
-				 <GPIOMUX(48, GPO_LOW,
-				  GPO_I2C1_PAD_SDA_OEN,
-				  GPI_I2C1_PAD_SDA_IN)>;
-			bias-pull-up;
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c2_pins: i2c2-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(60, GPO_LOW,
-				  GPO_I2C2_PAD_SCK_OEN,
-				  GPI_I2C2_PAD_SCK_IN)>,
-				 <GPIOMUX(59, GPO_LOW,
-				  GPO_I2C2_PAD_SDA_OEN,
-				  GPI_I2C2_PAD_SDA_IN)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	uart3_pins: uart3-0 {
-		rx-pins {
-			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
-				  GPI_UART3_PAD_SIN)>;
-			bias-pull-up;
-			drive-strength = <14>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-		tx-pins {
-			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
-				  GPO_ENABLE, GPI_NONE)>;
-			bias-disable;
-			drive-strength = <35>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-	};
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <500>;
-	i2c-scl-falling-time-ns = <500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	pmic@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <100>;
-	i2c-scl-falling-time-ns = <100>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <500>;
-	i2c-scl-falling-time-ns = <500>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&osc_sys {
-	clock-frequency = <25000000>;
-};
-
-&osc_aud {
-	clock-frequency = <27000000>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
new file mode 100644
index 000000000000..b93ce351a90f
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+/ {
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <6250000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ack {
+			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			label = "ack";
+		};
+	};
+};
+
+&gpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(62, GPO_LOW,
+				  GPO_I2C0_PAD_SCK_OEN,
+				  GPI_I2C0_PAD_SCK_IN)>,
+				 <GPIOMUX(61, GPO_LOW,
+				  GPO_I2C0_PAD_SDA_OEN,
+				  GPI_I2C0_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(47, GPO_LOW,
+				  GPO_I2C1_PAD_SCK_OEN,
+				  GPI_I2C1_PAD_SCK_IN)>,
+				 <GPIOMUX(48, GPO_LOW,
+				  GPO_I2C1_PAD_SDA_OEN,
+				  GPI_I2C1_PAD_SDA_IN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(60, GPO_LOW,
+				  GPO_I2C2_PAD_SCK_OEN,
+				  GPI_I2C2_PAD_SCK_IN)>,
+				 <GPIOMUX(59, GPO_LOW,
+				  GPO_I2C2_PAD_SDA_OEN,
+				  GPI_I2C2_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	uart3_pins: uart3-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+				  GPI_UART3_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	pmic@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <100>;
+	i2c-scl-falling-time-ns = <100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&osc_sys {
+	clock-frequency = <25000000>;
+};
+
+&osc_aud {
+	clock-frequency = <27000000>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
new file mode 100644
index 000000000000..e82af72f1aaf
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "StarFive VisionFive V1";
+	compatible = "starfive,visionfive-v1", "starfive,jh7100";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 05fd5fcf24f9..f7f32448f160 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -26,6 +26,7 @@ CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
 CONFIG_PROFILING=y
 CONFIG_SOC_MICROCHIP_POLARFIRE=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_SOC_SIFIVE=y
 CONFIG_SOC_STARFIVE=y
 CONFIG_SOC_VIRT=y
@@ -123,6 +124,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_SH_SCI=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
@@ -159,6 +161,7 @@ CONFIG_VIRTIO_MMIO=y
 CONFIG_RPMSG_CHAR=y
 CONFIG_RPMSG_CTRL=y
 CONFIG_RPMSG_VIRTIO=y
+CONFIG_ARCH_R9A07G043=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
index 96fe8def644c..79b3ccd58ff0 100644
--- a/arch/riscv/configs/nommu_k210_defconfig
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -25,7 +25,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
 CONFIG_NONPORTABLE=y
diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig
index 379740654373..6b80bb13b8ed 100644
--- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
+++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
@@ -17,7 +17,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
 CONFIG_NONPORTABLE=y
diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
index 1a56eda5ce46..4cf0f297091e 100644
--- a/arch/riscv/configs/nommu_virt_defconfig
+++ b/arch/riscv/configs/nommu_virt_defconfig
@@ -22,7 +22,8 @@ CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_MMU is not set
 CONFIG_SOC_VIRT=y
 CONFIG_NONPORTABLE=y
diff --git a/arch/riscv/include/asm/asm.h b/arch/riscv/include/asm/asm.h
index 1b471ff73178..816e753de636 100644
--- a/arch/riscv/include/asm/asm.h
+++ b/arch/riscv/include/asm/asm.h
@@ -23,6 +23,7 @@
 #define REG_L		__REG_SEL(ld, lw)
 #define REG_S		__REG_SEL(sd, sw)
 #define REG_SC		__REG_SEL(sc.d, sc.w)
+#define REG_AMOSWAP_AQ	__REG_SEL(amoswap.d.aq, amoswap.w.aq)
 #define REG_ASM		__REG_SEL(.dword, .word)
 #define SZREG		__REG_SEL(8, 4)
 #define LGREG		__REG_SEL(3, 2)
diff --git a/arch/riscv/include/asm/efi.h b/arch/riscv/include/asm/efi.h
index f74879a8f1ea..e229d7be4b66 100644
--- a/arch/riscv/include/asm/efi.h
+++ b/arch/riscv/include/asm/efi.h
@@ -10,6 +10,7 @@
 #include <asm/mmu_context.h>
 #include <asm/ptrace.h>
 #include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
@@ -20,7 +21,10 @@ extern void efi_init(void);
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
 int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 
-#define arch_efi_call_virt_setup()      efi_virtmap_load()
+#define arch_efi_call_virt_setup()      ({		\
+		sync_kernel_mappings(efi_mm.pgd);	\
+		efi_virtmap_load();			\
+	})
 #define arch_efi_call_virt_teardown()   efi_virtmap_unload()
 
 #define ARCH_EFI_IRQ_FLAGS_MASK (SR_IE | SR_SPIE)
diff --git a/arch/riscv/include/asm/pgalloc.h b/arch/riscv/include/asm/pgalloc.h
index 947f23d7b6af..59dc12b5b7e8 100644
--- a/arch/riscv/include/asm/pgalloc.h
+++ b/arch/riscv/include/asm/pgalloc.h
@@ -127,6 +127,13 @@ static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
 #define __p4d_free_tlb(tlb, p4d, addr)  p4d_free((tlb)->mm, p4d)
 #endif /* __PAGETABLE_PMD_FOLDED */
 
+static inline void sync_kernel_mappings(pgd_t *pgd)
+{
+	memcpy(pgd + USER_PTRS_PER_PGD,
+	       init_mm.pgd + USER_PTRS_PER_PGD,
+	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *pgd;
@@ -135,9 +142,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	if (likely(pgd != NULL)) {
 		memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
 		/* Copy kernel mappings */
-		memcpy(pgd + USER_PTRS_PER_PGD,
-			init_mm.pgd + USER_PTRS_PER_PGD,
-			(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+		sync_kernel_mappings(pgd);
 	}
 	return pgd;
 }
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 7ec936910a96..92ec2d9d7273 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -600,6 +600,7 @@ static inline int pmd_dirty(pmd_t pmd)
 	return pte_dirty(pmd_pte(pmd));
 }
 
+#define pmd_young pmd_young
 static inline int pmd_young(pmd_t pmd)
 {
 	return pte_young(pmd_pte(pmd));
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index d3443be7eedc..3831b638ecab 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -50,6 +50,9 @@ void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
 /* Clear IPI for current CPU */
 void riscv_clear_ipi(void);
 
+/* Check other CPUs stop or not */
+bool smp_crash_stop_failed(void);
+
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
 
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index b9eda3fcbd6d..186abd146eaf 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -404,6 +404,19 @@ handle_syscall_trace_exit:
 
 #ifdef CONFIG_VMAP_STACK
 handle_kernel_stack_overflow:
+	/*
+	 * Takes the psuedo-spinlock for the shadow stack, in case multiple
+	 * harts are concurrently overflowing their kernel stacks.  We could
+	 * store any value here, but since we're overflowing the kernel stack
+	 * already we only have SP to use as a scratch register.  So we just
+	 * swap in the address of the spinlock, as that's definately non-zero.
+	 *
+	 * Pairs with a store_release in handle_bad_stack().
+	 */
+1:	la sp, spin_shadow_stack
+	REG_AMOSWAP_AQ sp, sp, (sp)
+	bnez sp, 1b
+
 	la sp, shadow_stack
 	addi sp, sp, SHADOW_OVERFLOW_STACK_SIZE
 
diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c
index ee79e6839b86..2d139b724bc8 100644
--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -15,6 +15,8 @@
 #include <linux/compiler.h>	/* For unreachable() */
 #include <linux/cpu.h>		/* For cpu_down() */
 #include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 
 /*
  * kexec_image_info - Print received image details
@@ -138,20 +140,35 @@ void machine_shutdown(void)
 #endif
 }
 
-/* Override the weak function in kernel/panic.c */
-void crash_smp_send_stop(void)
+static void machine_kexec_mask_interrupts(void)
 {
-	static int cpus_stopped;
+	unsigned int i;
+	struct irq_desc *desc;
 
-	/*
-	 * This function can be called twice in panic path, but obviously
-	 * we execute this only once.
-	 */
-	if (cpus_stopped)
-		return;
+	for_each_irq_desc(i, desc) {
+		struct irq_chip *chip;
+		int ret;
+
+		chip = irq_desc_get_chip(desc);
+		if (!chip)
+			continue;
+
+		/*
+		 * First try to remove the active state. If this
+		 * fails, try to EOI the interrupt.
+		 */
+		ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false);
+
+		if (ret && irqd_irq_inprogress(&desc->irq_data) &&
+		    chip->irq_eoi)
+			chip->irq_eoi(&desc->irq_data);
 
-	smp_send_stop();
-	cpus_stopped = 1;
+		if (chip->irq_mask)
+			chip->irq_mask(&desc->irq_data);
+
+		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
+			chip->irq_disable(&desc->irq_data);
+	}
 }
 
 /*
@@ -169,6 +186,8 @@ machine_crash_shutdown(struct pt_regs *regs)
 	crash_smp_send_stop();
 
 	crash_save_cpu(regs, smp_processor_id());
+	machine_kexec_mask_interrupts();
+
 	pr_info("Starting crashdump kernel...\n");
 }
 
@@ -195,6 +214,11 @@ machine_kexec(struct kimage *image)
 	void *control_code_buffer = page_address(image->control_code_page);
 	riscv_kexec_method kexec_method = NULL;
 
+#ifdef CONFIG_SMP
+	WARN(smp_crash_stop_failed(),
+		"Some CPUs may be stale, kdump will be unreliable.\n");
+#endif
+
 	if (image->type != KEXEC_TYPE_CRASH)
 		kexec_method = control_code_buffer;
 	else
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 67ec1fadcfe2..86acd690d529 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -322,10 +322,11 @@ subsys_initcall(topology_init);
 
 void free_initmem(void)
 {
-	if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX))
-		set_kernel_memory(lm_alias(__init_begin), lm_alias(__init_end),
-				  IS_ENABLED(CONFIG_64BIT) ?
-					set_memory_rw : set_memory_rw_nx);
+	if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)) {
+		set_kernel_memory(lm_alias(__init_begin), lm_alias(__init_end), set_memory_rw_nx);
+		if (IS_ENABLED(CONFIG_64BIT))
+			set_kernel_memory(__init_begin, __init_end, set_memory_nx);
+	}
 
 	free_initmem_default(POISON_FREE_INITMEM);
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 760a64518c58..8c3b59f1f9b8 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -12,6 +12,7 @@
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/kexec.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
@@ -22,11 +23,13 @@
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
 
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CPU_STOP,
+	IPI_CPU_CRASH_STOP,
 	IPI_IRQ_WORK,
 	IPI_TIMER,
 	IPI_MAX
@@ -71,6 +74,32 @@ static void ipi_stop(void)
 		wait_for_interrupt();
 }
 
+#ifdef CONFIG_KEXEC_CORE
+static atomic_t waiting_for_crash_ipi = ATOMIC_INIT(0);
+
+static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+{
+	crash_save_cpu(regs, cpu);
+
+	atomic_dec(&waiting_for_crash_ipi);
+
+	local_irq_disable();
+
+#ifdef CONFIG_HOTPLUG_CPU
+	if (cpu_has_hotplug(cpu))
+		cpu_ops[cpu]->cpu_stop();
+#endif
+
+	for(;;)
+		wait_for_interrupt();
+}
+#else
+static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+{
+	unreachable();
+}
+#endif
+
 static const struct riscv_ipi_ops *ipi_ops __ro_after_init;
 
 void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
@@ -124,8 +153,9 @@ void arch_irq_work_raise(void)
 
 void handle_IPI(struct pt_regs *regs)
 {
-	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
-	unsigned long *stats = ipi_data[smp_processor_id()].stats;
+	unsigned int cpu = smp_processor_id();
+	unsigned long *pending_ipis = &ipi_data[cpu].bits;
+	unsigned long *stats = ipi_data[cpu].stats;
 
 	riscv_clear_ipi();
 
@@ -154,6 +184,10 @@ void handle_IPI(struct pt_regs *regs)
 			ipi_stop();
 		}
 
+		if (ops & (1 << IPI_CPU_CRASH_STOP)) {
+			ipi_cpu_crash_stop(cpu, get_irq_regs());
+		}
+
 		if (ops & (1 << IPI_IRQ_WORK)) {
 			stats[IPI_IRQ_WORK]++;
 			irq_work_run();
@@ -176,6 +210,7 @@ static const char * const ipi_names[] = {
 	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
 	[IPI_CALL_FUNC]		= "Function call interrupts",
 	[IPI_CPU_STOP]		= "CPU stop interrupts",
+	[IPI_CPU_CRASH_STOP]	= "CPU stop (for crash dump) interrupts",
 	[IPI_IRQ_WORK]		= "IRQ work interrupts",
 	[IPI_TIMER]		= "Timer broadcast interrupts",
 };
@@ -235,6 +270,64 @@ void smp_send_stop(void)
 			   cpumask_pr_args(cpu_online_mask));
 }
 
+#ifdef CONFIG_KEXEC_CORE
+/*
+ * The number of CPUs online, not counting this CPU (which may not be
+ * fully online and so not counted in num_online_cpus()).
+ */
+static inline unsigned int num_other_online_cpus(void)
+{
+	unsigned int this_cpu_online = cpu_online(smp_processor_id());
+
+	return num_online_cpus() - this_cpu_online;
+}
+
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+	cpumask_t mask;
+	unsigned long timeout;
+
+	/*
+	 * This function can be called twice in panic path, but obviously
+	 * we execute this only once.
+	 */
+	if (cpus_stopped)
+		return;
+
+	cpus_stopped = 1;
+
+	/*
+	 * If this cpu is the only one alive at this point in time, online or
+	 * not, there are no stop messages to be sent around, so just back out.
+	 */
+	if (num_other_online_cpus() == 0)
+		return;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+
+	atomic_set(&waiting_for_crash_ipi, num_other_online_cpus());
+
+	pr_crit("SMP: stopping secondary CPUs\n");
+	send_ipi_mask(&mask, IPI_CPU_CRASH_STOP);
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && timeout--)
+		udelay(1);
+
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",
+			cpumask_pr_args(&mask));
+}
+
+bool smp_crash_stop_failed(void)
+{
+	return (atomic_read(&waiting_for_crash_ipi) > 0);
+}
+#endif
+
 void smp_send_reschedule(int cpu)
 {
 	send_ipi_single(cpu, IPI_RESCHEDULE);
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index f3e96d60a2ff..7abd8e4c4df6 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -221,11 +221,29 @@ asmlinkage unsigned long get_overflow_stack(void)
 		OVERFLOW_STACK_SIZE;
 }
 
+/*
+ * A pseudo spinlock to protect the shadow stack from being used by multiple
+ * harts concurrently.  This isn't a real spinlock because the lock side must
+ * be taken without a valid stack and only a single register, it's only taken
+ * while in the process of panicing anyway so the performance and error
+ * checking a proper spinlock gives us doesn't matter.
+ */
+unsigned long spin_shadow_stack;
+
 asmlinkage void handle_bad_stack(struct pt_regs *regs)
 {
 	unsigned long tsk_stk = (unsigned long)current->stack;
 	unsigned long ovf_stk = (unsigned long)this_cpu_ptr(overflow_stack);
 
+	/*
+	 * We're done with the shadow stack by this point, as we're on the
+	 * overflow stack.  Tell any other concurrent overflowing harts that
+	 * they can proceed with panicing by releasing the pseudo-spinlock.
+	 *
+	 * This pairs with an amoswap.aq in handle_kernel_stack_overflow.
+	 */
+	smp_store_release(&spin_shadow_stack, 0);
+
 	console_verbose();
 
 	pr_emerg("Insufficient stack space to handle exception!\n");
diff --git a/arch/riscv/kernel/vdso.c b/arch/riscv/kernel/vdso.c
index 123d05255fcf..e410275918ac 100644
--- a/arch/riscv/kernel/vdso.c
+++ b/arch/riscv/kernel/vdso.c
@@ -137,28 +137,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 	mmap_read_unlock(mm);
 	return 0;
 }
-
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_mm == current->mm))
-		return current->nsproxy->time_ns->vvar_page;
-
-	/*
-	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
-	 * through interfaces like /proc/$pid/mem or
-	 * process_vm_{readv,writev}() as long as there's no .access()
-	 * in special_mapping_vmops.
-	 * For more details check_vma_flags() and __access_remote_vm()
-	 */
-	WARN(1, "vvar_page accessed remotely");
-
-	return NULL;
-}
-#else
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	return NULL;
-}
 #endif
 
 static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index db6548509bb3..06e6b27f3bcc 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -17,6 +17,7 @@ vdso-syms += flush_icache
 obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o
 
 ccflags-y := -fno-stack-protector
+ccflags-y += -DDISABLE_BRANCH_PROFILING
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -fPIC -include $(c-gettimeofday-y)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index de575af02ffe..7fd08755a1f9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -26,6 +26,10 @@ config GENERIC_BUG
 config GENERIC_BUG_RELATIVE_POINTERS
 	def_bool y
 
+config GENERIC_CSUM
+	bool
+	default y if KASAN
+
 config GENERIC_LOCKBREAK
 	def_bool y if PREEMPTION
 
@@ -73,6 +77,7 @@ config S390
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SCALED_CPUTIME
 	select ARCH_HAS_SET_MEMORY
@@ -121,6 +126,7 @@ config S390
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS2
 	select DMA_OPS if PCI
@@ -196,6 +202,7 @@ config S390
 	select HAVE_RSEQ
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_SETUP_PER_CPU_AREA
 	select HAVE_SOFTIRQ_ON_OWN_STACK
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
@@ -207,6 +214,7 @@ config S390
 	select MMU_GATHER_MERGE_VMAS
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE	if PCI
+	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_SG_DMA_LENGTH	if PCI
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index d74a4c7d5df6..c0fd29133f27 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -26,8 +26,6 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/workqueue.h>
-#include <linux/suspend.h>
-#include <linux/platform_device.h>
 #include <asm/appldata.h>
 #include <asm/vtimer.h>
 #include <linux/uaccess.h>
@@ -44,8 +42,6 @@
 #define TOD_MICRO	0x01000			/* nr. of TOD clock units
 						   for 1 microsecond */
 
-static struct platform_device *appldata_pdev;
-
 /*
  * /proc entries (sysctl)
  */
@@ -88,7 +84,6 @@ static struct vtimer_list appldata_timer;
 static DEFINE_SPINLOCK(appldata_timer_lock);
 static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
-static int appldata_timer_suspended = 0;
 
 /*
  * Work queue
@@ -412,88 +407,6 @@ void appldata_unregister_ops(struct appldata_ops *ops)
 /********************** module-ops management <END> **************************/
 
 
-/**************************** suspend / resume *******************************/
-static int appldata_freeze(struct device *dev)
-{
-	struct appldata_ops *ops;
-	int rc;
-	struct list_head *lh;
-
-	spin_lock(&appldata_timer_lock);
-	if (appldata_timer_active) {
-		__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
-		appldata_timer_suspended = 1;
-	}
-	spin_unlock(&appldata_timer_lock);
-
-	mutex_lock(&appldata_ops_mutex);
-	list_for_each(lh, &appldata_ops_list) {
-		ops = list_entry(lh, struct appldata_ops, list);
-		if (ops->active == 1) {
-			rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
-					(unsigned long) ops->data, ops->size,
-					ops->mod_lvl);
-			if (rc != 0)
-				pr_err("Stopping the data collection for %s "
-				       "failed with rc=%d\n", ops->name, rc);
-		}
-	}
-	mutex_unlock(&appldata_ops_mutex);
-	return 0;
-}
-
-static int appldata_restore(struct device *dev)
-{
-	struct appldata_ops *ops;
-	int rc;
-	struct list_head *lh;
-
-	spin_lock(&appldata_timer_lock);
-	if (appldata_timer_suspended) {
-		__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
-		appldata_timer_suspended = 0;
-	}
-	spin_unlock(&appldata_timer_lock);
-
-	mutex_lock(&appldata_ops_mutex);
-	list_for_each(lh, &appldata_ops_list) {
-		ops = list_entry(lh, struct appldata_ops, list);
-		if (ops->active == 1) {
-			ops->callback(ops->data);	// init record
-			rc = appldata_diag(ops->record_nr,
-					APPLDATA_START_INTERVAL_REC,
-					(unsigned long) ops->data, ops->size,
-					ops->mod_lvl);
-			if (rc != 0) {
-				pr_err("Starting the data collection for %s "
-				       "failed with rc=%d\n", ops->name, rc);
-			}
-		}
-	}
-	mutex_unlock(&appldata_ops_mutex);
-	return 0;
-}
-
-static int appldata_thaw(struct device *dev)
-{
-	return appldata_restore(dev);
-}
-
-static const struct dev_pm_ops appldata_pm_ops = {
-	.freeze		= appldata_freeze,
-	.thaw		= appldata_thaw,
-	.restore	= appldata_restore,
-};
-
-static struct platform_driver appldata_pdrv = {
-	.driver = {
-		.name	= "appldata",
-		.pm	= &appldata_pm_ops,
-	},
-};
-/************************* suspend / resume <END> ****************************/
-
-
 /******************************* init / exit *********************************/
 
 /*
@@ -503,36 +416,14 @@ static struct platform_driver appldata_pdrv = {
  */
 static int __init appldata_init(void)
 {
-	int rc;
-
 	init_virt_timer(&appldata_timer);
 	appldata_timer.function = appldata_timer_function;
 	appldata_timer.data = (unsigned long) &appldata_work;
-
-	rc = platform_driver_register(&appldata_pdrv);
-	if (rc)
-		return rc;
-
-	appldata_pdev = platform_device_register_simple("appldata", -1, NULL,
-							0);
-	if (IS_ERR(appldata_pdev)) {
-		rc = PTR_ERR(appldata_pdev);
-		goto out_driver;
-	}
 	appldata_wq = alloc_ordered_workqueue("appldata", 0);
-	if (!appldata_wq) {
-		rc = -ENOMEM;
-		goto out_device;
-	}
-
+	if (!appldata_wq)
+		return -ENOMEM;
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
 	return 0;
-
-out_device:
-	platform_device_unregister(appldata_pdev);
-out_driver:
-	platform_driver_unregister(&appldata_pdrv);
-	return rc;
 }
 
 __initcall(appldata_init);
diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c
index ca78d6162245..c1f8f7999fed 100644
--- a/arch/s390/boot/ipl_parm.c
+++ b/arch/s390/boot/ipl_parm.c
@@ -77,6 +77,9 @@ bool is_ipl_block_dump(void)
 	if (ipl_block.pb0_hdr.pbt == IPL_PBT_NVME &&
 	    ipl_block.nvme.opt == IPL_PB0_NVME_OPT_DUMP)
 		return true;
+	if (ipl_block.pb0_hdr.pbt == IPL_PBT_ECKD &&
+	    ipl_block.eckd.opt == IPL_PB0_ECKD_OPT_DUMP)
+		return true;
 	return false;
 }
 
@@ -108,6 +111,11 @@ static size_t ipl_block_get_ascii_scpdata(char *dest, size_t size,
 		scp_data_len = ipb->nvme.scp_data_len;
 		scp_data = ipb->nvme.scp_data;
 		break;
+	case IPL_PBT_ECKD:
+		scp_data_len = ipb->eckd.scp_data_len;
+		scp_data = ipb->eckd.scp_data;
+		break;
+
 	default:
 		goto out;
 	}
@@ -153,6 +161,7 @@ static void append_ipl_block_parm(void)
 		break;
 	case IPL_PBT_FCP:
 	case IPL_PBT_NVME:
+	case IPL_PBT_ECKD:
 		rc = ipl_block_get_ascii_scpdata(
 			parm, COMMAND_LINE_SIZE - len - 1, &ipl_block);
 		break;
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 6511d15ace45..c3be533c4cd3 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -68,14 +68,6 @@ static inline __u8 info_blk_hdr__flags(enum diag204_format type, void *hdr)
 		return ((struct diag204_x_info_blk_hdr *)hdr)->flags;
 }
 
-static inline __u16 info_blk_hdr__pcpus(enum diag204_format type, void *hdr)
-{
-	if (type == DIAG204_INFO_SIMPLE)
-		return ((struct diag204_info_blk_hdr *)hdr)->phys_cpus;
-	else /* DIAG204_INFO_EXT */
-		return ((struct diag204_x_info_blk_hdr *)hdr)->phys_cpus;
-}
-
 /* Partition header */
 
 static inline int part_hdr__size(enum diag204_format type)
diff --git a/arch/s390/include/asm/bugs.h b/arch/s390/include/asm/bugs.h
deleted file mode 100644
index aa42a179be33..000000000000
--- a/arch/s390/include/asm/bugs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  S390 version
- *    Copyright IBM Corp. 1999
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bugs.h"
- *    Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *      void check_bugs(void);
- */
-
-static inline void check_bugs(void)
-{
-  /* s390 has no bugs ... */
-}
diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
index cdd19d326345..d977a3a2f619 100644
--- a/arch/s390/include/asm/checksum.h
+++ b/arch/s390/include/asm/checksum.h
@@ -12,6 +12,12 @@
 #ifndef _S390_CHECKSUM_H
 #define _S390_CHECKSUM_H
 
+#ifdef CONFIG_GENERIC_CSUM
+
+#include <asm-generic/checksum.h>
+
+#else /* CONFIG_GENERIC_CSUM */
+
 #include <linux/uaccess.h>
 #include <linux/in6.h>
 
@@ -129,4 +135,5 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	return csum_fold((__force __wsum)(sum >> 32));
 }
 
+#endif /* CONFIG_GENERIC_CSUM */
 #endif /* _S390_CHECKSUM_H */
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 6f80ec9c04be..e5c5cb1207e2 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -54,12 +54,33 @@ static __always_inline struct pt_regs *arch_ftrace_get_regs(struct ftrace_regs *
 	return NULL;
 }
 
-static __always_inline void ftrace_instruction_pointer_set(struct ftrace_regs *fregs,
-							   unsigned long ip)
+static __always_inline unsigned long
+ftrace_regs_get_instruction_pointer(const struct ftrace_regs *fregs)
+{
+	return fregs->regs.psw.addr;
+}
+
+static __always_inline void
+ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
+				    unsigned long ip)
 {
 	fregs->regs.psw.addr = ip;
 }
 
+#define ftrace_regs_get_argument(fregs, n) \
+	regs_get_kernel_argument(&(fregs)->regs, n)
+#define ftrace_regs_get_stack_pointer(fregs) \
+	kernel_stack_pointer(&(fregs)->regs)
+#define ftrace_regs_return_value(fregs) \
+	regs_return_value(&(fregs)->regs)
+#define ftrace_regs_set_return_value(fregs, ret) \
+	regs_set_return_value(&(fregs)->regs, ret)
+#define ftrace_override_function_with_return(fregs) \
+	override_function_with_return(&(fregs)->regs)
+#define ftrace_regs_query_register_offset(name) \
+	regs_query_register_offset(name)
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 /*
  * When an ftrace registered caller is tracing a function that is
  * also set by a register_ftrace_direct() call, it needs to be
@@ -67,10 +88,12 @@ static __always_inline void ftrace_instruction_pointer_set(struct ftrace_regs *f
  * place the direct caller in the ORIG_GPR2 part of pt_regs. This
  * tells the ftrace_caller that there's a direct caller.
  */
-static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
+static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs, unsigned long addr)
 {
+	struct pt_regs *regs = &fregs->regs;
 	regs->orig_gpr2 = addr;
 }
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
 
 /*
  * Even though the system call numbers are identical for s390/s390x a
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index a405b6bb89fb..b0d00032479d 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -22,6 +22,7 @@ struct ipl_parameter_block {
 		struct ipl_pb0_common common;
 		struct ipl_pb0_fcp fcp;
 		struct ipl_pb0_ccw ccw;
+		struct ipl_pb0_eckd eckd;
 		struct ipl_pb0_nvme nvme;
 		char raw[PAGE_SIZE - sizeof(struct ipl_pl_hdr)];
 	};
@@ -41,6 +42,10 @@ struct ipl_parameter_block {
 			      sizeof(struct ipl_pb0_ccw))
 #define IPL_BP0_CCW_LEN (sizeof(struct ipl_pb0_ccw))
 
+#define IPL_BP_ECKD_LEN (sizeof(struct ipl_pl_hdr) + \
+			      sizeof(struct ipl_pb0_eckd))
+#define IPL_BP0_ECKD_LEN (sizeof(struct ipl_pb0_eckd))
+
 #define IPL_MAX_SUPPORTED_VERSION (0)
 
 #define IPL_RB_CERT_UNKNOWN ((unsigned short)-1)
@@ -68,6 +73,8 @@ enum ipl_type {
 	IPL_TYPE_NSS		= 16,
 	IPL_TYPE_NVME		= 32,
 	IPL_TYPE_NVME_DUMP	= 64,
+	IPL_TYPE_ECKD		= 128,
+	IPL_TYPE_ECKD_DUMP	= 256,
 };
 
 struct ipl_info
@@ -79,6 +86,9 @@ struct ipl_info
 		} ccw;
 		struct {
 			struct ccw_dev_id dev_id;
+		} eckd;
+		struct {
+			struct ccw_dev_id dev_id;
 			u64 wwpn;
 			u64 lun;
 		} fcp;
@@ -99,6 +109,7 @@ extern void set_os_info_reipl_block(void);
 static inline bool is_ipl_type_dump(void)
 {
 	return (ipl_info.type == IPL_TYPE_FCP_DUMP) ||
+		(ipl_info.type == IPL_TYPE_ECKD_DUMP) ||
 		(ipl_info.type == IPL_TYPE_NVME_DUMP);
 }
 
diff --git a/arch/s390/include/asm/pai.h b/arch/s390/include/asm/pai.h
index 1a8a6b15d121..7d1888e3dee6 100644
--- a/arch/s390/include/asm/pai.h
+++ b/arch/s390/include/asm/pai.h
@@ -75,4 +75,10 @@ static __always_inline void pai_kernel_exit(struct pt_regs *regs)
 	WRITE_ONCE(S390_lowcore.ccd, S390_lowcore.ccd & ~PAI_CRYPTO_KERNEL_OFFSET);
 }
 
+enum paievt_mode {
+	PAI_MODE_NONE,
+	PAI_MODE_SAMPLING,
+	PAI_MODE_COUNTING,
+};
+
 #endif
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index f1cb9391190d..11e901286414 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -763,6 +763,7 @@ static inline int pmd_dirty(pmd_t pmd)
 	return (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) != 0;
 }
 
+#define pmd_young pmd_young
 static inline int pmd_young(pmd_t pmd)
 {
 	return (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) != 0;
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 87be3e855bf7..c907f747d2a0 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -199,7 +199,16 @@ unsigned long __get_wchan(struct task_struct *p);
 /* Has task runtime instrumentation enabled ? */
 #define is_ri_task(tsk) (!!(tsk)->thread.ri_cb)
 
-register unsigned long current_stack_pointer asm("r15");
+/* avoid using global register due to gcc bug in versions < 8.4 */
+#define current_stack_pointer (__current_stack_pointer())
+
+static __always_inline unsigned long __current_stack_pointer(void)
+{
+	unsigned long sp;
+
+	asm volatile("lgr %0,15" : "=d" (sp));
+	return sp;
+}
 
 static __always_inline unsigned short stap(void)
 {
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
index 9d4c7f71e070..dac7da88f61f 100644
--- a/arch/s390/include/asm/sclp.h
+++ b/arch/s390/include/asm/sclp.h
@@ -87,6 +87,7 @@ struct sclp_info {
 	unsigned char has_gisaf : 1;
 	unsigned char has_diag318 : 1;
 	unsigned char has_sipl : 1;
+	unsigned char has_sipl_eckd : 1;
 	unsigned char has_dirq : 1;
 	unsigned char has_iplcc : 1;
 	unsigned char has_zpci_lsi : 1;
@@ -131,6 +132,7 @@ void sclp_early_get_ipl_info(struct sclp_ipl_info *info);
 void sclp_early_detect(void);
 void sclp_early_printk(const char *s);
 void __sclp_early_printk(const char *s, unsigned int len);
+void sclp_emergency_printk(const char *s);
 
 int sclp_early_get_memsize(unsigned long *mem);
 int sclp_early_get_hsa_size(unsigned long *hsa_size);
diff --git a/arch/s390/include/asm/serial.h b/arch/s390/include/asm/serial.h
deleted file mode 100644
index aaf85a69061c..000000000000
--- a/arch/s390/include/asm/serial.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_S390_SERIAL_H
-#define _ASM_S390_SERIAL_H
-
-#define BASE_BAUD 0
-
-#endif /* _ASM_S390_SERIAL_H */
diff --git a/arch/s390/include/asm/shmparam.h b/arch/s390/include/asm/shmparam.h
deleted file mode 100644
index e75d45649c54..000000000000
--- a/arch/s390/include/asm/shmparam.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  S390 version
- *
- *  Derived from "include/asm-i386/shmparam.h"
- */
-#ifndef _ASM_S390_SHMPARAM_H
-#define _ASM_S390_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
-
-#endif /* _ASM_S390_SHMPARAM_H */
diff --git a/arch/s390/include/asm/vga.h b/arch/s390/include/asm/vga.h
deleted file mode 100644
index 605dc46bac5e..000000000000
--- a/arch/s390/include/asm/vga.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_S390_VGA_H
-#define _ASM_S390_VGA_H
-
-/* Avoid compile errors due to missing asm/vga.h */
-
-#endif /* _ASM_S390_VGA_H */
diff --git a/arch/s390/include/asm/vx-insn-asm.h b/arch/s390/include/asm/vx-insn-asm.h
new file mode 100644
index 000000000000..360f8b36d962
--- /dev/null
+++ b/arch/s390/include/asm/vx-insn-asm.h
@@ -0,0 +1,681 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Support for Vector Instructions
+ *
+ * Assembler macros to generate .byte/.word code for particular
+ * vector instructions that are supported by recent binutils (>= 2.26) only.
+ *
+ * Copyright IBM Corp. 2015
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ */
+
+#ifndef __ASM_S390_VX_INSN_INTERNAL_H
+#define __ASM_S390_VX_INSN_INTERNAL_H
+
+#ifndef __ASM_S390_VX_INSN_H
+#error only <asm/vx-insn.h> can be included directly
+#endif
+
+#ifdef __ASSEMBLY__
+
+/* Macros to generate vector instruction byte code */
+
+/* GR_NUM - Retrieve general-purpose register number
+ *
+ * @opd:	Operand to store register number
+ * @r64:	String designation register in the format "%rN"
+ */
+.macro	GR_NUM	opd gr
+	\opd = 255
+	.ifc \gr,%r0
+		\opd = 0
+	.endif
+	.ifc \gr,%r1
+		\opd = 1
+	.endif
+	.ifc \gr,%r2
+		\opd = 2
+	.endif
+	.ifc \gr,%r3
+		\opd = 3
+	.endif
+	.ifc \gr,%r4
+		\opd = 4
+	.endif
+	.ifc \gr,%r5
+		\opd = 5
+	.endif
+	.ifc \gr,%r6
+		\opd = 6
+	.endif
+	.ifc \gr,%r7
+		\opd = 7
+	.endif
+	.ifc \gr,%r8
+		\opd = 8
+	.endif
+	.ifc \gr,%r9
+		\opd = 9
+	.endif
+	.ifc \gr,%r10
+		\opd = 10
+	.endif
+	.ifc \gr,%r11
+		\opd = 11
+	.endif
+	.ifc \gr,%r12
+		\opd = 12
+	.endif
+	.ifc \gr,%r13
+		\opd = 13
+	.endif
+	.ifc \gr,%r14
+		\opd = 14
+	.endif
+	.ifc \gr,%r15
+		\opd = 15
+	.endif
+	.if \opd == 255
+		\opd = \gr
+	.endif
+.endm
+
+/* VX_NUM - Retrieve vector register number
+ *
+ * @opd:	Operand to store register number
+ * @vxr:	String designation register in the format "%vN"
+ *
+ * The vector register number is used for as input number to the
+ * instruction and, as well as, to compute the RXB field of the
+ * instruction.
+ */
+.macro	VX_NUM	opd vxr
+	\opd = 255
+	.ifc \vxr,%v0
+		\opd = 0
+	.endif
+	.ifc \vxr,%v1
+		\opd = 1
+	.endif
+	.ifc \vxr,%v2
+		\opd = 2
+	.endif
+	.ifc \vxr,%v3
+		\opd = 3
+	.endif
+	.ifc \vxr,%v4
+		\opd = 4
+	.endif
+	.ifc \vxr,%v5
+		\opd = 5
+	.endif
+	.ifc \vxr,%v6
+		\opd = 6
+	.endif
+	.ifc \vxr,%v7
+		\opd = 7
+	.endif
+	.ifc \vxr,%v8
+		\opd = 8
+	.endif
+	.ifc \vxr,%v9
+		\opd = 9
+	.endif
+	.ifc \vxr,%v10
+		\opd = 10
+	.endif
+	.ifc \vxr,%v11
+		\opd = 11
+	.endif
+	.ifc \vxr,%v12
+		\opd = 12
+	.endif
+	.ifc \vxr,%v13
+		\opd = 13
+	.endif
+	.ifc \vxr,%v14
+		\opd = 14
+	.endif
+	.ifc \vxr,%v15
+		\opd = 15
+	.endif
+	.ifc \vxr,%v16
+		\opd = 16
+	.endif
+	.ifc \vxr,%v17
+		\opd = 17
+	.endif
+	.ifc \vxr,%v18
+		\opd = 18
+	.endif
+	.ifc \vxr,%v19
+		\opd = 19
+	.endif
+	.ifc \vxr,%v20
+		\opd = 20
+	.endif
+	.ifc \vxr,%v21
+		\opd = 21
+	.endif
+	.ifc \vxr,%v22
+		\opd = 22
+	.endif
+	.ifc \vxr,%v23
+		\opd = 23
+	.endif
+	.ifc \vxr,%v24
+		\opd = 24
+	.endif
+	.ifc \vxr,%v25
+		\opd = 25
+	.endif
+	.ifc \vxr,%v26
+		\opd = 26
+	.endif
+	.ifc \vxr,%v27
+		\opd = 27
+	.endif
+	.ifc \vxr,%v28
+		\opd = 28
+	.endif
+	.ifc \vxr,%v29
+		\opd = 29
+	.endif
+	.ifc \vxr,%v30
+		\opd = 30
+	.endif
+	.ifc \vxr,%v31
+		\opd = 31
+	.endif
+	.if \opd == 255
+		\opd = \vxr
+	.endif
+.endm
+
+/* RXB - Compute most significant bit used vector registers
+ *
+ * @rxb:	Operand to store computed RXB value
+ * @v1:		First vector register designated operand
+ * @v2:		Second vector register designated operand
+ * @v3:		Third vector register designated operand
+ * @v4:		Fourth vector register designated operand
+ */
+.macro	RXB	rxb v1 v2=0 v3=0 v4=0
+	\rxb = 0
+	.if \v1 & 0x10
+		\rxb = \rxb | 0x08
+	.endif
+	.if \v2 & 0x10
+		\rxb = \rxb | 0x04
+	.endif
+	.if \v3 & 0x10
+		\rxb = \rxb | 0x02
+	.endif
+	.if \v4 & 0x10
+		\rxb = \rxb | 0x01
+	.endif
+.endm
+
+/* MRXB - Generate Element Size Control and RXB value
+ *
+ * @m:		Element size control
+ * @v1:		First vector register designated operand (for RXB)
+ * @v2:		Second vector register designated operand (for RXB)
+ * @v3:		Third vector register designated operand (for RXB)
+ * @v4:		Fourth vector register designated operand (for RXB)
+ */
+.macro	MRXB	m v1 v2=0 v3=0 v4=0
+	rxb = 0
+	RXB	rxb, \v1, \v2, \v3, \v4
+	.byte	(\m << 4) | rxb
+.endm
+
+/* MRXBOPC - Generate Element Size Control, RXB, and final Opcode fields
+ *
+ * @m:		Element size control
+ * @opc:	Opcode
+ * @v1:		First vector register designated operand (for RXB)
+ * @v2:		Second vector register designated operand (for RXB)
+ * @v3:		Third vector register designated operand (for RXB)
+ * @v4:		Fourth vector register designated operand (for RXB)
+ */
+.macro	MRXBOPC	m opc v1 v2=0 v3=0 v4=0
+	MRXB	\m, \v1, \v2, \v3, \v4
+	.byte	\opc
+.endm
+
+/* Vector support instructions */
+
+/* VECTOR GENERATE BYTE MASK */
+.macro	VGBM	vr imm2
+	VX_NUM	v1, \vr
+	.word	(0xE700 | ((v1&15) << 4))
+	.word	\imm2
+	MRXBOPC	0, 0x44, v1
+.endm
+.macro	VZERO	vxr
+	VGBM	\vxr, 0
+.endm
+.macro	VONE	vxr
+	VGBM	\vxr, 0xFFFF
+.endm
+
+/* VECTOR LOAD VR ELEMENT FROM GR */
+.macro	VLVG	v, gr, disp, m
+	VX_NUM	v1, \v
+	GR_NUM	b2, "%r0"
+	GR_NUM	r3, \gr
+	.word	0xE700 | ((v1&15) << 4) | r3
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\m, 0x22, v1
+.endm
+.macro	VLVGB	v, gr, index, base
+	VLVG	\v, \gr, \index, \base, 0
+.endm
+.macro	VLVGH	v, gr, index
+	VLVG	\v, \gr, \index, 1
+.endm
+.macro	VLVGF	v, gr, index
+	VLVG	\v, \gr, \index, 2
+.endm
+.macro	VLVGG	v, gr, index
+	VLVG	\v, \gr, \index, 3
+.endm
+
+/* VECTOR LOAD REGISTER */
+.macro	VLR	v1, v2
+	VX_NUM	v1, \v1
+	VX_NUM	v2, \v2
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	0
+	MRXBOPC	0, 0x56, v1, v2
+.endm
+
+/* VECTOR LOAD */
+.macro	VL	v, disp, index="%r0", base
+	VX_NUM	v1, \v
+	GR_NUM	x2, \index
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | x2
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC 0, 0x06, v1
+.endm
+
+/* VECTOR LOAD ELEMENT */
+.macro	VLEx	vr1, disp, index="%r0", base, m3, opc
+	VX_NUM	v1, \vr1
+	GR_NUM	x2, \index
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | x2
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\m3, \opc, v1
+.endm
+.macro	VLEB	vr1, disp, index="%r0", base, m3
+	VLEx	\vr1, \disp, \index, \base, \m3, 0x00
+.endm
+.macro	VLEH	vr1, disp, index="%r0", base, m3
+	VLEx	\vr1, \disp, \index, \base, \m3, 0x01
+.endm
+.macro	VLEF	vr1, disp, index="%r0", base, m3
+	VLEx	\vr1, \disp, \index, \base, \m3, 0x03
+.endm
+.macro	VLEG	vr1, disp, index="%r0", base, m3
+	VLEx	\vr1, \disp, \index, \base, \m3, 0x02
+.endm
+
+/* VECTOR LOAD ELEMENT IMMEDIATE */
+.macro	VLEIx	vr1, imm2, m3, opc
+	VX_NUM	v1, \vr1
+	.word	0xE700 | ((v1&15) << 4)
+	.word	\imm2
+	MRXBOPC	\m3, \opc, v1
+.endm
+.macro	VLEIB	vr1, imm2, index
+	VLEIx	\vr1, \imm2, \index, 0x40
+.endm
+.macro	VLEIH	vr1, imm2, index
+	VLEIx	\vr1, \imm2, \index, 0x41
+.endm
+.macro	VLEIF	vr1, imm2, index
+	VLEIx	\vr1, \imm2, \index, 0x43
+.endm
+.macro	VLEIG	vr1, imm2, index
+	VLEIx	\vr1, \imm2, \index, 0x42
+.endm
+
+/* VECTOR LOAD GR FROM VR ELEMENT */
+.macro	VLGV	gr, vr, disp, base="%r0", m
+	GR_NUM	r1, \gr
+	GR_NUM	b2, \base
+	VX_NUM	v3, \vr
+	.word	0xE700 | (r1 << 4) | (v3&15)
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\m, 0x21, v3
+.endm
+.macro	VLGVB	gr, vr, disp, base="%r0"
+	VLGV	\gr, \vr, \disp, \base, 0
+.endm
+.macro	VLGVH	gr, vr, disp, base="%r0"
+	VLGV	\gr, \vr, \disp, \base, 1
+.endm
+.macro	VLGVF	gr, vr, disp, base="%r0"
+	VLGV	\gr, \vr, \disp, \base, 2
+.endm
+.macro	VLGVG	gr, vr, disp, base="%r0"
+	VLGV	\gr, \vr, \disp, \base, 3
+.endm
+
+/* VECTOR LOAD MULTIPLE */
+.macro	VLM	vfrom, vto, disp, base, hint=3
+	VX_NUM	v1, \vfrom
+	VX_NUM	v3, \vto
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\hint, 0x36, v1, v3
+.endm
+
+/* VECTOR STORE */
+.macro	VST	vr1, disp, index="%r0", base
+	VX_NUM	v1, \vr1
+	GR_NUM	x2, \index
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | (x2&15)
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	0, 0x0E, v1
+.endm
+
+/* VECTOR STORE MULTIPLE */
+.macro	VSTM	vfrom, vto, disp, base, hint=3
+	VX_NUM	v1, \vfrom
+	VX_NUM	v3, \vto
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\hint, 0x3E, v1, v3
+.endm
+
+/* VECTOR PERMUTE */
+.macro	VPERM	vr1, vr2, vr3, vr4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	VX_NUM	v4, \vr4
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	(v4&15), 0x8C, v1, v2, v3, v4
+.endm
+
+/* VECTOR UNPACK LOGICAL LOW */
+.macro	VUPLL	vr1, vr2, m3
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	0x0000
+	MRXBOPC	\m3, 0xD4, v1, v2
+.endm
+.macro	VUPLLB	vr1, vr2
+	VUPLL	\vr1, \vr2, 0
+.endm
+.macro	VUPLLH	vr1, vr2
+	VUPLL	\vr1, \vr2, 1
+.endm
+.macro	VUPLLF	vr1, vr2
+	VUPLL	\vr1, \vr2, 2
+.endm
+
+/* VECTOR PERMUTE DOUBLEWORD IMMEDIATE */
+.macro	VPDI	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0x84, v1, v2, v3
+.endm
+
+/* VECTOR REPLICATE */
+.macro	VREP	vr1, vr3, imm2, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
+	.word	\imm2
+	MRXBOPC	\m4, 0x4D, v1, v3
+.endm
+.macro	VREPB	vr1, vr3, imm2
+	VREP	\vr1, \vr3, \imm2, 0
+.endm
+.macro	VREPH	vr1, vr3, imm2
+	VREP	\vr1, \vr3, \imm2, 1
+.endm
+.macro	VREPF	vr1, vr3, imm2
+	VREP	\vr1, \vr3, \imm2, 2
+.endm
+.macro	VREPG	vr1, vr3, imm2
+	VREP	\vr1, \vr3, \imm2, 3
+.endm
+
+/* VECTOR MERGE HIGH */
+.macro	VMRH	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0x61, v1, v2, v3
+.endm
+.macro	VMRHB	vr1, vr2, vr3
+	VMRH	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VMRHH	vr1, vr2, vr3
+	VMRH	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VMRHF	vr1, vr2, vr3
+	VMRH	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VMRHG	vr1, vr2, vr3
+	VMRH	\vr1, \vr2, \vr3, 3
+.endm
+
+/* VECTOR MERGE LOW */
+.macro	VMRL	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0x60, v1, v2, v3
+.endm
+.macro	VMRLB	vr1, vr2, vr3
+	VMRL	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VMRLH	vr1, vr2, vr3
+	VMRL	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VMRLF	vr1, vr2, vr3
+	VMRL	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VMRLG	vr1, vr2, vr3
+	VMRL	\vr1, \vr2, \vr3, 3
+.endm
+
+
+/* Vector integer instructions */
+
+/* VECTOR AND */
+.macro	VN	vr1, vr2, vr3
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	0, 0x68, v1, v2, v3
+.endm
+
+/* VECTOR EXCLUSIVE OR */
+.macro	VX	vr1, vr2, vr3
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	0, 0x6D, v1, v2, v3
+.endm
+
+/* VECTOR GALOIS FIELD MULTIPLY SUM */
+.macro	VGFM	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0xB4, v1, v2, v3
+.endm
+.macro	VGFMB	vr1, vr2, vr3
+	VGFM	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VGFMH	vr1, vr2, vr3
+	VGFM	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VGFMF	vr1, vr2, vr3
+	VGFM	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VGFMG	vr1, vr2, vr3
+	VGFM	\vr1, \vr2, \vr3, 3
+.endm
+
+/* VECTOR GALOIS FIELD MULTIPLY SUM AND ACCUMULATE */
+.macro	VGFMA	vr1, vr2, vr3, vr4, m5
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	VX_NUM	v4, \vr4
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12) | (\m5 << 8)
+	MRXBOPC	(v4&15), 0xBC, v1, v2, v3, v4
+.endm
+.macro	VGFMAB	vr1, vr2, vr3, vr4
+	VGFMA	\vr1, \vr2, \vr3, \vr4, 0
+.endm
+.macro	VGFMAH	vr1, vr2, vr3, vr4
+	VGFMA	\vr1, \vr2, \vr3, \vr4, 1
+.endm
+.macro	VGFMAF	vr1, vr2, vr3, vr4
+	VGFMA	\vr1, \vr2, \vr3, \vr4, 2
+.endm
+.macro	VGFMAG	vr1, vr2, vr3, vr4
+	VGFMA	\vr1, \vr2, \vr3, \vr4, 3
+.endm
+
+/* VECTOR SHIFT RIGHT LOGICAL BY BYTE */
+.macro	VSRLB	vr1, vr2, vr3
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	0, 0x7D, v1, v2, v3
+.endm
+
+/* VECTOR REPLICATE IMMEDIATE */
+.macro	VREPI	vr1, imm2, m3
+	VX_NUM	v1, \vr1
+	.word	0xE700 | ((v1&15) << 4)
+	.word	\imm2
+	MRXBOPC	\m3, 0x45, v1
+.endm
+.macro	VREPIB	vr1, imm2
+	VREPI	\vr1, \imm2, 0
+.endm
+.macro	VREPIH	vr1, imm2
+	VREPI	\vr1, \imm2, 1
+.endm
+.macro	VREPIF	vr1, imm2
+	VREPI	\vr1, \imm2, 2
+.endm
+.macro	VREPIG	vr1, imm2
+	VREP	\vr1, \imm2, 3
+.endm
+
+/* VECTOR ADD */
+.macro	VA	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0xF3, v1, v2, v3
+.endm
+.macro	VAB	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VAH	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VAF	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VAG	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 3
+.endm
+.macro	VAQ	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 4
+.endm
+
+/* VECTOR ELEMENT SHIFT RIGHT ARITHMETIC */
+.macro	VESRAV	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC \m4, 0x7A, v1, v2, v3
+.endm
+
+.macro	VESRAVB	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VESRAVH	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VESRAVF	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VESRAVG	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 3
+.endm
+
+/* VECTOR ELEMENT ROTATE LEFT LOGICAL */
+.macro	VERLL	vr1, vr3, disp, base="%r0", m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v3, \vr3
+	GR_NUM	b2, \base
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
+	.word	(b2 << 12) | (\disp)
+	MRXBOPC	\m4, 0x33, v1, v3
+.endm
+.macro	VERLLB	vr1, vr3, disp, base="%r0"
+	VERLL	\vr1, \vr3, \disp, \base, 0
+.endm
+.macro	VERLLH	vr1, vr3, disp, base="%r0"
+	VERLL	\vr1, \vr3, \disp, \base, 1
+.endm
+.macro	VERLLF	vr1, vr3, disp, base="%r0"
+	VERLL	\vr1, \vr3, \disp, \base, 2
+.endm
+.macro	VERLLG	vr1, vr3, disp, base="%r0"
+	VERLL	\vr1, \vr3, \disp, \base, 3
+.endm
+
+/* VECTOR SHIFT LEFT DOUBLE BY BYTE */
+.macro	VSLDB	vr1, vr2, vr3, imm4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12) | (\imm4)
+	MRXBOPC	0, 0x77, v1, v2, v3
+.endm
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __ASM_S390_VX_INSN_INTERNAL_H */
diff --git a/arch/s390/include/asm/vx-insn.h b/arch/s390/include/asm/vx-insn.h
index 95480ed9149e..8c188f1c6d27 100644
--- a/arch/s390/include/asm/vx-insn.h
+++ b/arch/s390/include/asm/vx-insn.h
@@ -2,677 +2,18 @@
 /*
  * Support for Vector Instructions
  *
- * Assembler macros to generate .byte/.word code for particular
- * vector instructions that are supported by recent binutils (>= 2.26) only.
- *
- * Copyright IBM Corp. 2015
- * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ * This wrapper header file allows to use the vector instruction macros in
+ * both assembler files as well as in inline assemblies in C files.
  */
 
 #ifndef __ASM_S390_VX_INSN_H
 #define __ASM_S390_VX_INSN_H
 
-#ifdef __ASSEMBLY__
-
-
-/* Macros to generate vector instruction byte code */
-
-/* GR_NUM - Retrieve general-purpose register number
- *
- * @opd:	Operand to store register number
- * @r64:	String designation register in the format "%rN"
- */
-.macro	GR_NUM	opd gr
-	\opd = 255
-	.ifc \gr,%r0
-		\opd = 0
-	.endif
-	.ifc \gr,%r1
-		\opd = 1
-	.endif
-	.ifc \gr,%r2
-		\opd = 2
-	.endif
-	.ifc \gr,%r3
-		\opd = 3
-	.endif
-	.ifc \gr,%r4
-		\opd = 4
-	.endif
-	.ifc \gr,%r5
-		\opd = 5
-	.endif
-	.ifc \gr,%r6
-		\opd = 6
-	.endif
-	.ifc \gr,%r7
-		\opd = 7
-	.endif
-	.ifc \gr,%r8
-		\opd = 8
-	.endif
-	.ifc \gr,%r9
-		\opd = 9
-	.endif
-	.ifc \gr,%r10
-		\opd = 10
-	.endif
-	.ifc \gr,%r11
-		\opd = 11
-	.endif
-	.ifc \gr,%r12
-		\opd = 12
-	.endif
-	.ifc \gr,%r13
-		\opd = 13
-	.endif
-	.ifc \gr,%r14
-		\opd = 14
-	.endif
-	.ifc \gr,%r15
-		\opd = 15
-	.endif
-	.if \opd == 255
-		\opd = \gr
-	.endif
-.endm
-
-/* VX_NUM - Retrieve vector register number
- *
- * @opd:	Operand to store register number
- * @vxr:	String designation register in the format "%vN"
- *
- * The vector register number is used for as input number to the
- * instruction and, as well as, to compute the RXB field of the
- * instruction.
- */
-.macro	VX_NUM	opd vxr
-	\opd = 255
-	.ifc \vxr,%v0
-		\opd = 0
-	.endif
-	.ifc \vxr,%v1
-		\opd = 1
-	.endif
-	.ifc \vxr,%v2
-		\opd = 2
-	.endif
-	.ifc \vxr,%v3
-		\opd = 3
-	.endif
-	.ifc \vxr,%v4
-		\opd = 4
-	.endif
-	.ifc \vxr,%v5
-		\opd = 5
-	.endif
-	.ifc \vxr,%v6
-		\opd = 6
-	.endif
-	.ifc \vxr,%v7
-		\opd = 7
-	.endif
-	.ifc \vxr,%v8
-		\opd = 8
-	.endif
-	.ifc \vxr,%v9
-		\opd = 9
-	.endif
-	.ifc \vxr,%v10
-		\opd = 10
-	.endif
-	.ifc \vxr,%v11
-		\opd = 11
-	.endif
-	.ifc \vxr,%v12
-		\opd = 12
-	.endif
-	.ifc \vxr,%v13
-		\opd = 13
-	.endif
-	.ifc \vxr,%v14
-		\opd = 14
-	.endif
-	.ifc \vxr,%v15
-		\opd = 15
-	.endif
-	.ifc \vxr,%v16
-		\opd = 16
-	.endif
-	.ifc \vxr,%v17
-		\opd = 17
-	.endif
-	.ifc \vxr,%v18
-		\opd = 18
-	.endif
-	.ifc \vxr,%v19
-		\opd = 19
-	.endif
-	.ifc \vxr,%v20
-		\opd = 20
-	.endif
-	.ifc \vxr,%v21
-		\opd = 21
-	.endif
-	.ifc \vxr,%v22
-		\opd = 22
-	.endif
-	.ifc \vxr,%v23
-		\opd = 23
-	.endif
-	.ifc \vxr,%v24
-		\opd = 24
-	.endif
-	.ifc \vxr,%v25
-		\opd = 25
-	.endif
-	.ifc \vxr,%v26
-		\opd = 26
-	.endif
-	.ifc \vxr,%v27
-		\opd = 27
-	.endif
-	.ifc \vxr,%v28
-		\opd = 28
-	.endif
-	.ifc \vxr,%v29
-		\opd = 29
-	.endif
-	.ifc \vxr,%v30
-		\opd = 30
-	.endif
-	.ifc \vxr,%v31
-		\opd = 31
-	.endif
-	.if \opd == 255
-		\opd = \vxr
-	.endif
-.endm
-
-/* RXB - Compute most significant bit used vector registers
- *
- * @rxb:	Operand to store computed RXB value
- * @v1:		First vector register designated operand
- * @v2:		Second vector register designated operand
- * @v3:		Third vector register designated operand
- * @v4:		Fourth vector register designated operand
- */
-.macro	RXB	rxb v1 v2=0 v3=0 v4=0
-	\rxb = 0
-	.if \v1 & 0x10
-		\rxb = \rxb | 0x08
-	.endif
-	.if \v2 & 0x10
-		\rxb = \rxb | 0x04
-	.endif
-	.if \v3 & 0x10
-		\rxb = \rxb | 0x02
-	.endif
-	.if \v4 & 0x10
-		\rxb = \rxb | 0x01
-	.endif
-.endm
-
-/* MRXB - Generate Element Size Control and RXB value
- *
- * @m:		Element size control
- * @v1:		First vector register designated operand (for RXB)
- * @v2:		Second vector register designated operand (for RXB)
- * @v3:		Third vector register designated operand (for RXB)
- * @v4:		Fourth vector register designated operand (for RXB)
- */
-.macro	MRXB	m v1 v2=0 v3=0 v4=0
-	rxb = 0
-	RXB	rxb, \v1, \v2, \v3, \v4
-	.byte	(\m << 4) | rxb
-.endm
-
-/* MRXBOPC - Generate Element Size Control, RXB, and final Opcode fields
- *
- * @m:		Element size control
- * @opc:	Opcode
- * @v1:		First vector register designated operand (for RXB)
- * @v2:		Second vector register designated operand (for RXB)
- * @v3:		Third vector register designated operand (for RXB)
- * @v4:		Fourth vector register designated operand (for RXB)
- */
-.macro	MRXBOPC	m opc v1 v2=0 v3=0 v4=0
-	MRXB	\m, \v1, \v2, \v3, \v4
-	.byte	\opc
-.endm
-
-/* Vector support instructions */
-
-/* VECTOR GENERATE BYTE MASK */
-.macro	VGBM	vr imm2
-	VX_NUM	v1, \vr
-	.word	(0xE700 | ((v1&15) << 4))
-	.word	\imm2
-	MRXBOPC	0, 0x44, v1
-.endm
-.macro	VZERO	vxr
-	VGBM	\vxr, 0
-.endm
-.macro	VONE	vxr
-	VGBM	\vxr, 0xFFFF
-.endm
-
-/* VECTOR LOAD VR ELEMENT FROM GR */
-.macro	VLVG	v, gr, disp, m
-	VX_NUM	v1, \v
-	GR_NUM	b2, "%r0"
-	GR_NUM	r3, \gr
-	.word	0xE700 | ((v1&15) << 4) | r3
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\m, 0x22, v1
-.endm
-.macro	VLVGB	v, gr, index, base
-	VLVG	\v, \gr, \index, \base, 0
-.endm
-.macro	VLVGH	v, gr, index
-	VLVG	\v, \gr, \index, 1
-.endm
-.macro	VLVGF	v, gr, index
-	VLVG	\v, \gr, \index, 2
-.endm
-.macro	VLVGG	v, gr, index
-	VLVG	\v, \gr, \index, 3
-.endm
-
-/* VECTOR LOAD REGISTER */
-.macro	VLR	v1, v2
-	VX_NUM	v1, \v1
-	VX_NUM	v2, \v2
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	0
-	MRXBOPC	0, 0x56, v1, v2
-.endm
-
-/* VECTOR LOAD */
-.macro	VL	v, disp, index="%r0", base
-	VX_NUM	v1, \v
-	GR_NUM	x2, \index
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | x2
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC 0, 0x06, v1
-.endm
-
-/* VECTOR LOAD ELEMENT */
-.macro	VLEx	vr1, disp, index="%r0", base, m3, opc
-	VX_NUM	v1, \vr1
-	GR_NUM	x2, \index
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | x2
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\m3, \opc, v1
-.endm
-.macro	VLEB	vr1, disp, index="%r0", base, m3
-	VLEx	\vr1, \disp, \index, \base, \m3, 0x00
-.endm
-.macro	VLEH	vr1, disp, index="%r0", base, m3
-	VLEx	\vr1, \disp, \index, \base, \m3, 0x01
-.endm
-.macro	VLEF	vr1, disp, index="%r0", base, m3
-	VLEx	\vr1, \disp, \index, \base, \m3, 0x03
-.endm
-.macro	VLEG	vr1, disp, index="%r0", base, m3
-	VLEx	\vr1, \disp, \index, \base, \m3, 0x02
-.endm
-
-/* VECTOR LOAD ELEMENT IMMEDIATE */
-.macro	VLEIx	vr1, imm2, m3, opc
-	VX_NUM	v1, \vr1
-	.word	0xE700 | ((v1&15) << 4)
-	.word	\imm2
-	MRXBOPC	\m3, \opc, v1
-.endm
-.macro	VLEIB	vr1, imm2, index
-	VLEIx	\vr1, \imm2, \index, 0x40
-.endm
-.macro	VLEIH	vr1, imm2, index
-	VLEIx	\vr1, \imm2, \index, 0x41
-.endm
-.macro	VLEIF	vr1, imm2, index
-	VLEIx	\vr1, \imm2, \index, 0x43
-.endm
-.macro	VLEIG	vr1, imm2, index
-	VLEIx	\vr1, \imm2, \index, 0x42
-.endm
-
-/* VECTOR LOAD GR FROM VR ELEMENT */
-.macro	VLGV	gr, vr, disp, base="%r0", m
-	GR_NUM	r1, \gr
-	GR_NUM	b2, \base
-	VX_NUM	v3, \vr
-	.word	0xE700 | (r1 << 4) | (v3&15)
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\m, 0x21, v3
-.endm
-.macro	VLGVB	gr, vr, disp, base="%r0"
-	VLGV	\gr, \vr, \disp, \base, 0
-.endm
-.macro	VLGVH	gr, vr, disp, base="%r0"
-	VLGV	\gr, \vr, \disp, \base, 1
-.endm
-.macro	VLGVF	gr, vr, disp, base="%r0"
-	VLGV	\gr, \vr, \disp, \base, 2
-.endm
-.macro	VLGVG	gr, vr, disp, base="%r0"
-	VLGV	\gr, \vr, \disp, \base, 3
-.endm
-
-/* VECTOR LOAD MULTIPLE */
-.macro	VLM	vfrom, vto, disp, base, hint=3
-	VX_NUM	v1, \vfrom
-	VX_NUM	v3, \vto
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | (v3&15)
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\hint, 0x36, v1, v3
-.endm
-
-/* VECTOR STORE */
-.macro	VST	vr1, disp, index="%r0", base
-	VX_NUM	v1, \vr1
-	GR_NUM	x2, \index
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | (x2&15)
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	0, 0x0E, v1
-.endm
-
-/* VECTOR STORE MULTIPLE */
-.macro	VSTM	vfrom, vto, disp, base, hint=3
-	VX_NUM	v1, \vfrom
-	VX_NUM	v3, \vto
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | (v3&15)
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\hint, 0x3E, v1, v3
-.endm
-
-/* VECTOR PERMUTE */
-.macro	VPERM	vr1, vr2, vr3, vr4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	VX_NUM	v4, \vr4
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	(v4&15), 0x8C, v1, v2, v3, v4
-.endm
-
-/* VECTOR UNPACK LOGICAL LOW */
-.macro	VUPLL	vr1, vr2, m3
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	0x0000
-	MRXBOPC	\m3, 0xD4, v1, v2
-.endm
-.macro	VUPLLB	vr1, vr2
-	VUPLL	\vr1, \vr2, 0
-.endm
-.macro	VUPLLH	vr1, vr2
-	VUPLL	\vr1, \vr2, 1
-.endm
-.macro	VUPLLF	vr1, vr2
-	VUPLL	\vr1, \vr2, 2
-.endm
-
-/* VECTOR PERMUTE DOUBLEWORD IMMEDIATE */
-.macro	VPDI	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	\m4, 0x84, v1, v2, v3
-.endm
-
-/* VECTOR REPLICATE */
-.macro	VREP	vr1, vr3, imm2, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v3&15)
-	.word	\imm2
-	MRXBOPC	\m4, 0x4D, v1, v3
-.endm
-.macro	VREPB	vr1, vr3, imm2
-	VREP	\vr1, \vr3, \imm2, 0
-.endm
-.macro	VREPH	vr1, vr3, imm2
-	VREP	\vr1, \vr3, \imm2, 1
-.endm
-.macro	VREPF	vr1, vr3, imm2
-	VREP	\vr1, \vr3, \imm2, 2
-.endm
-.macro	VREPG	vr1, vr3, imm2
-	VREP	\vr1, \vr3, \imm2, 3
-.endm
-
-/* VECTOR MERGE HIGH */
-.macro	VMRH	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	\m4, 0x61, v1, v2, v3
-.endm
-.macro	VMRHB	vr1, vr2, vr3
-	VMRH	\vr1, \vr2, \vr3, 0
-.endm
-.macro	VMRHH	vr1, vr2, vr3
-	VMRH	\vr1, \vr2, \vr3, 1
-.endm
-.macro	VMRHF	vr1, vr2, vr3
-	VMRH	\vr1, \vr2, \vr3, 2
-.endm
-.macro	VMRHG	vr1, vr2, vr3
-	VMRH	\vr1, \vr2, \vr3, 3
-.endm
-
-/* VECTOR MERGE LOW */
-.macro	VMRL	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	\m4, 0x60, v1, v2, v3
-.endm
-.macro	VMRLB	vr1, vr2, vr3
-	VMRL	\vr1, \vr2, \vr3, 0
-.endm
-.macro	VMRLH	vr1, vr2, vr3
-	VMRL	\vr1, \vr2, \vr3, 1
-.endm
-.macro	VMRLF	vr1, vr2, vr3
-	VMRL	\vr1, \vr2, \vr3, 2
-.endm
-.macro	VMRLG	vr1, vr2, vr3
-	VMRL	\vr1, \vr2, \vr3, 3
-.endm
-
-
-/* Vector integer instructions */
-
-/* VECTOR AND */
-.macro	VN	vr1, vr2, vr3
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	0, 0x68, v1, v2, v3
-.endm
-
-/* VECTOR EXCLUSIVE OR */
-.macro	VX	vr1, vr2, vr3
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	0, 0x6D, v1, v2, v3
-.endm
-
-/* VECTOR GALOIS FIELD MULTIPLY SUM */
-.macro	VGFM	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	\m4, 0xB4, v1, v2, v3
-.endm
-.macro	VGFMB	vr1, vr2, vr3
-	VGFM	\vr1, \vr2, \vr3, 0
-.endm
-.macro	VGFMH	vr1, vr2, vr3
-	VGFM	\vr1, \vr2, \vr3, 1
-.endm
-.macro	VGFMF	vr1, vr2, vr3
-	VGFM	\vr1, \vr2, \vr3, 2
-.endm
-.macro	VGFMG	vr1, vr2, vr3
-	VGFM	\vr1, \vr2, \vr3, 3
-.endm
-
-/* VECTOR GALOIS FIELD MULTIPLY SUM AND ACCUMULATE */
-.macro	VGFMA	vr1, vr2, vr3, vr4, m5
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	VX_NUM	v4, \vr4
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12) | (\m5 << 8)
-	MRXBOPC	(v4&15), 0xBC, v1, v2, v3, v4
-.endm
-.macro	VGFMAB	vr1, vr2, vr3, vr4
-	VGFMA	\vr1, \vr2, \vr3, \vr4, 0
-.endm
-.macro	VGFMAH	vr1, vr2, vr3, vr4
-	VGFMA	\vr1, \vr2, \vr3, \vr4, 1
-.endm
-.macro	VGFMAF	vr1, vr2, vr3, vr4
-	VGFMA	\vr1, \vr2, \vr3, \vr4, 2
-.endm
-.macro	VGFMAG	vr1, vr2, vr3, vr4
-	VGFMA	\vr1, \vr2, \vr3, \vr4, 3
-.endm
-
-/* VECTOR SHIFT RIGHT LOGICAL BY BYTE */
-.macro	VSRLB	vr1, vr2, vr3
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	0, 0x7D, v1, v2, v3
-.endm
-
-/* VECTOR REPLICATE IMMEDIATE */
-.macro	VREPI	vr1, imm2, m3
-	VX_NUM	v1, \vr1
-	.word	0xE700 | ((v1&15) << 4)
-	.word	\imm2
-	MRXBOPC	\m3, 0x45, v1
-.endm
-.macro	VREPIB	vr1, imm2
-	VREPI	\vr1, \imm2, 0
-.endm
-.macro	VREPIH	vr1, imm2
-	VREPI	\vr1, \imm2, 1
-.endm
-.macro	VREPIF	vr1, imm2
-	VREPI	\vr1, \imm2, 2
-.endm
-.macro	VREPIG	vr1, imm2
-	VREP	\vr1, \imm2, 3
-.endm
-
-/* VECTOR ADD */
-.macro	VA	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC	\m4, 0xF3, v1, v2, v3
-.endm
-.macro	VAB	vr1, vr2, vr3
-	VA	\vr1, \vr2, \vr3, 0
-.endm
-.macro	VAH	vr1, vr2, vr3
-	VA	\vr1, \vr2, \vr3, 1
-.endm
-.macro	VAF	vr1, vr2, vr3
-	VA	\vr1, \vr2, \vr3, 2
-.endm
-.macro	VAG	vr1, vr2, vr3
-	VA	\vr1, \vr2, \vr3, 3
-.endm
-.macro	VAQ	vr1, vr2, vr3
-	VA	\vr1, \vr2, \vr3, 4
-.endm
-
-/* VECTOR ELEMENT SHIFT RIGHT ARITHMETIC */
-.macro	VESRAV	vr1, vr2, vr3, m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12)
-	MRXBOPC \m4, 0x7A, v1, v2, v3
-.endm
-
-.macro	VESRAVB	vr1, vr2, vr3
-	VESRAV	\vr1, \vr2, \vr3, 0
-.endm
-.macro	VESRAVH	vr1, vr2, vr3
-	VESRAV	\vr1, \vr2, \vr3, 1
-.endm
-.macro	VESRAVF	vr1, vr2, vr3
-	VESRAV	\vr1, \vr2, \vr3, 2
-.endm
-.macro	VESRAVG	vr1, vr2, vr3
-	VESRAV	\vr1, \vr2, \vr3, 3
-.endm
+#include <asm/vx-insn-asm.h>
 
-/* VECTOR ELEMENT ROTATE LEFT LOGICAL */
-.macro	VERLL	vr1, vr3, disp, base="%r0", m4
-	VX_NUM	v1, \vr1
-	VX_NUM	v3, \vr3
-	GR_NUM	b2, \base
-	.word	0xE700 | ((v1&15) << 4) | (v3&15)
-	.word	(b2 << 12) | (\disp)
-	MRXBOPC	\m4, 0x33, v1, v3
-.endm
-.macro	VERLLB	vr1, vr3, disp, base="%r0"
-	VERLL	\vr1, \vr3, \disp, \base, 0
-.endm
-.macro	VERLLH	vr1, vr3, disp, base="%r0"
-	VERLL	\vr1, \vr3, \disp, \base, 1
-.endm
-.macro	VERLLF	vr1, vr3, disp, base="%r0"
-	VERLL	\vr1, \vr3, \disp, \base, 2
-.endm
-.macro	VERLLG	vr1, vr3, disp, base="%r0"
-	VERLL	\vr1, \vr3, \disp, \base, 3
-.endm
+#ifndef __ASSEMBLY__
 
-/* VECTOR SHIFT LEFT DOUBLE BY BYTE */
-.macro	VSLDB	vr1, vr2, vr3, imm4
-	VX_NUM	v1, \vr1
-	VX_NUM	v2, \vr2
-	VX_NUM	v3, \vr3
-	.word	0xE700 | ((v1&15) << 4) | (v2&15)
-	.word	((v3&15) << 12) | (\imm4)
-	MRXBOPC	0, 0x77, v1, v2, v3
-.endm
+asm(".include \"asm/vx-insn-asm.h\"\n");
 
-#endif	/* __ASSEMBLY__ */
+#endif /* __ASSEMBLY__ */
 #endif	/* __ASM_S390_VX_INSN_H */
diff --git a/arch/s390/include/uapi/asm/ipl.h b/arch/s390/include/uapi/asm/ipl.h
index d1ecd5d722a0..2cd28af50dd4 100644
--- a/arch/s390/include/uapi/asm/ipl.h
+++ b/arch/s390/include/uapi/asm/ipl.h
@@ -27,6 +27,7 @@ enum ipl_pbt {
 	IPL_PBT_FCP = 0,
 	IPL_PBT_SCP_DATA = 1,
 	IPL_PBT_CCW = 2,
+	IPL_PBT_ECKD = 3,
 	IPL_PBT_NVME = 4,
 };
 
@@ -111,6 +112,34 @@ struct ipl_pb0_ccw {
 	__u8  reserved5[8];
 } __packed;
 
+/* IPL Parameter Block 0 for ECKD */
+struct ipl_pb0_eckd {
+	__u32 len;
+	__u8  pbt;
+	__u8  reserved1[3];
+	__u32 reserved2[78];
+	__u8  opt;
+	__u8  reserved4[4];
+	__u8  reserved5:5;
+	__u8  ssid:3;
+	__u16 devno;
+	__u32 reserved6[5];
+	__u32 bootprog;
+	__u8  reserved7[12];
+	struct {
+		__u16 cyl;
+		__u8 head;
+		__u8 record;
+		__u32 reserved;
+	} br_chr __packed;
+	__u32 scp_data_len;
+	__u8  reserved8[260];
+	__u8  scp_data[];
+} __packed;
+
+#define IPL_PB0_ECKD_OPT_IPL	0x10
+#define IPL_PB0_ECKD_OPT_DUMP	0x20
+
 #define IPL_PB0_CCW_VM_FLAG_NSS		0x80
 #define IPL_PB0_CCW_VM_FLAG_VP		0x40
 
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index dd74fe664ed1..e4ef67e4da0a 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -46,7 +46,7 @@ struct save_area {
 	u64 fprs[16];
 	u32 fpc;
 	u32 prefix;
-	u64 todpreg;
+	u32 todpreg;
 	u64 timer;
 	u64 todcmp;
 	u64 vxrs_low[16];
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index d7a82066a638..b376f0377a2c 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -92,7 +92,7 @@ static int debug_input_flush_fn(debug_info_t *id, struct debug_view *view,
 static int debug_hex_ascii_format_fn(debug_info_t *id, struct debug_view *view,
 				     char *out_buf, const char *in_buf);
 static int debug_sprintf_format_fn(debug_info_t *id, struct debug_view *view,
-				   char *out_buf, debug_sprintf_entry_t *curr_event);
+				   char *out_buf, const char *inbuf);
 static void debug_areas_swap(debug_info_t *a, debug_info_t *b);
 static void debug_events_append(debug_info_t *dest, debug_info_t *src);
 
@@ -139,7 +139,7 @@ struct debug_view debug_sprintf_view = {
 	"sprintf",
 	NULL,
 	&debug_dflt_header_fn,
-	(debug_format_proc_t *)&debug_sprintf_format_fn,
+	&debug_sprintf_format_fn,
 	NULL,
 	NULL
 };
@@ -1532,8 +1532,9 @@ EXPORT_SYMBOL(debug_dflt_header_fn);
 #define DEBUG_SPRINTF_MAX_ARGS 10
 
 static int debug_sprintf_format_fn(debug_info_t *id, struct debug_view *view,
-				   char *out_buf, debug_sprintf_entry_t *curr_event)
+				   char *out_buf, const char *inbuf)
 {
+	debug_sprintf_entry_t *curr_event = (debug_sprintf_entry_t *)inbuf;
 	int num_longs, num_used_args = 0, i, rc = 0;
 	int index[DEBUG_SPRINTF_MAX_ARGS];
 
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index d2a1f2f4f5b8..e0d11f3adfcc 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -122,24 +122,6 @@ _LPP_OFFSET	= __LC_LPP
 		    "jnz .+8; .insn rrf,0xb2e80000,0,0,13,0", 82
 	.endm
 
-	/*
-	 * The CHKSTG macro jumps to the provided label in case the
-	 * machine check interruption code reports one of unrecoverable
-	 * storage errors:
-	 * - Storage error uncorrected
-	 * - Storage key error uncorrected
-	 * - Storage degradation with Failing-storage-address validity
-	 */
-	.macro CHKSTG errlabel
-	TSTMSK	__LC_MCCK_CODE,(MCCK_CODE_STG_ERROR|MCCK_CODE_STG_KEY_ERROR)
-	jnz	\errlabel
-	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_DEGRAD
-	jz	.Loklabel\@
-	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_FAIL_ADDR
-	jnz	\errlabel
-.Loklabel\@:
-	.endm
-
 #if IS_ENABLED(CONFIG_KVM)
 	/*
 	 * The OUTSIDE macro jumps to the provided label in case the value
@@ -546,26 +528,18 @@ ENTRY(mcck_int_handler)
 3:	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
 	jno	.Lmcck_panic
 	tmhh	%r8,0x0001		# interrupting from user ?
-	jnz	6f
+	jnz	.Lmcck_user
 	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
 	jno	.Lmcck_panic
 #if IS_ENABLED(CONFIG_KVM)
-	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,6f
+	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,.Lmcck_stack
 	OUTSIDE	%r9,.Lsie_entry,.Lsie_leave,4f
 	oi	__LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
-	j	5f
-4:	CHKSTG	.Lmcck_panic
-5:	larl	%r14,.Lstosm_tmp
-	stosm	0(%r14),0x04		# turn dat on, keep irqs off
-	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
+4:	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
 	SIEEXIT
 	j	.Lmcck_stack
 #endif
-6:	CHKSTG	.Lmcck_panic
-	larl	%r14,.Lstosm_tmp
-	stosm	0(%r14),0x04		# turn dat on, keep irqs off
-	tmhh	%r8,0x0001		# interrupting from user ?
-	jz	.Lmcck_stack
+.Lmcck_user:
 	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
 .Lmcck_stack:
 	lg	%r15,__LC_MCCK_STACK
diff --git a/arch/s390/kernel/fpu.c b/arch/s390/kernel/fpu.c
index d864c9a325e2..4666b29ac8a1 100644
--- a/arch/s390/kernel/fpu.c
+++ b/arch/s390/kernel/fpu.c
@@ -10,8 +10,7 @@
 #include <linux/sched.h>
 #include <asm/fpu/types.h>
 #include <asm/fpu/api.h>
-
-asm(".include \"asm/vx-insn.h\"\n");
+#include <asm/vx-insn.h>
 
 void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
 {
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 325cbf69ebbd..fbd646dbf440 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/kstrtox.h>
 #include <linux/panic_notifier.h>
 #include <linux/reboot.h>
 #include <linux/ctype.h>
@@ -39,6 +40,8 @@
 
 #define IPL_UNKNOWN_STR		"unknown"
 #define IPL_CCW_STR		"ccw"
+#define IPL_ECKD_STR		"eckd"
+#define IPL_ECKD_DUMP_STR	"eckd_dump"
 #define IPL_FCP_STR		"fcp"
 #define IPL_FCP_DUMP_STR	"fcp_dump"
 #define IPL_NVME_STR		"nvme"
@@ -46,6 +49,7 @@
 #define IPL_NSS_STR		"nss"
 
 #define DUMP_CCW_STR		"ccw"
+#define DUMP_ECKD_STR		"eckd"
 #define DUMP_FCP_STR		"fcp"
 #define DUMP_NVME_STR		"nvme"
 #define DUMP_NONE_STR		"none"
@@ -92,6 +96,10 @@ static char *ipl_type_str(enum ipl_type type)
 	switch (type) {
 	case IPL_TYPE_CCW:
 		return IPL_CCW_STR;
+	case IPL_TYPE_ECKD:
+		return IPL_ECKD_STR;
+	case IPL_TYPE_ECKD_DUMP:
+		return IPL_ECKD_DUMP_STR;
 	case IPL_TYPE_FCP:
 		return IPL_FCP_STR;
 	case IPL_TYPE_FCP_DUMP:
@@ -113,6 +121,7 @@ enum dump_type {
 	DUMP_TYPE_CCW	= 2,
 	DUMP_TYPE_FCP	= 4,
 	DUMP_TYPE_NVME	= 8,
+	DUMP_TYPE_ECKD	= 16,
 };
 
 static char *dump_type_str(enum dump_type type)
@@ -122,6 +131,8 @@ static char *dump_type_str(enum dump_type type)
 		return DUMP_NONE_STR;
 	case DUMP_TYPE_CCW:
 		return DUMP_CCW_STR;
+	case DUMP_TYPE_ECKD:
+		return DUMP_ECKD_STR;
 	case DUMP_TYPE_FCP:
 		return DUMP_FCP_STR;
 	case DUMP_TYPE_NVME:
@@ -147,6 +158,7 @@ static enum ipl_type reipl_type = IPL_TYPE_UNKNOWN;
 static struct ipl_parameter_block *reipl_block_fcp;
 static struct ipl_parameter_block *reipl_block_nvme;
 static struct ipl_parameter_block *reipl_block_ccw;
+static struct ipl_parameter_block *reipl_block_eckd;
 static struct ipl_parameter_block *reipl_block_nss;
 static struct ipl_parameter_block *reipl_block_actual;
 
@@ -155,12 +167,14 @@ static enum dump_type dump_type = DUMP_TYPE_NONE;
 static struct ipl_parameter_block *dump_block_fcp;
 static struct ipl_parameter_block *dump_block_nvme;
 static struct ipl_parameter_block *dump_block_ccw;
+static struct ipl_parameter_block *dump_block_eckd;
 
 static struct sclp_ipl_info sclp_ipl_info;
 
 static bool reipl_nvme_clear;
 static bool reipl_fcp_clear;
 static bool reipl_ccw_clear;
+static bool reipl_eckd_clear;
 
 static inline int __diag308(unsigned long subcode, void *addr)
 {
@@ -218,14 +232,14 @@ IPL_ATTR_SHOW_FN(_prefix, _name, "0.%x.%04x\n",				\
 		 _ipl_blk.ssid, _ipl_blk.devno);			\
 IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk);			\
 static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
-	__ATTR(_name, (S_IRUGO | S_IWUSR),				\
+	__ATTR(_name, 0644,						\
 	       sys_##_prefix##_##_name##_show,				\
 	       sys_##_prefix##_##_name##_store)				\
 
 #define DEFINE_IPL_ATTR_RO(_prefix, _name, _format, _value)		\
 IPL_ATTR_SHOW_FN(_prefix, _name, _format, _value)			\
 static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
-	__ATTR(_name, S_IRUGO, sys_##_prefix##_##_name##_show, NULL)
+	__ATTR(_name, 0444, sys_##_prefix##_##_name##_show, NULL)
 
 #define DEFINE_IPL_ATTR_RW(_prefix, _name, _fmt_out, _fmt_in, _value)	\
 IPL_ATTR_SHOW_FN(_prefix, _name, _fmt_out, (unsigned long long) _value)	\
@@ -240,7 +254,7 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj,	\
 	return len;							\
 }									\
 static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
-	__ATTR(_name,(S_IRUGO | S_IWUSR),				\
+	__ATTR(_name, 0644,						\
 			sys_##_prefix##_##_name##_show,			\
 			sys_##_prefix##_##_name##_store)
 
@@ -255,7 +269,7 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj,	\
 	return len;							\
 }									\
 static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
-	__ATTR(_name,(S_IRUGO | S_IWUSR),				\
+	__ATTR(_name, 0644,						\
 			sys_##_prefix##_##_name##_show,			\
 			sys_##_prefix##_##_name##_store)
 
@@ -281,6 +295,11 @@ static __init enum ipl_type get_ipl_type(void)
 			return IPL_TYPE_NVME_DUMP;
 		else
 			return IPL_TYPE_NVME;
+	case IPL_PBT_ECKD:
+		if (ipl_block.eckd.opt == IPL_PB0_ECKD_OPT_DUMP)
+			return IPL_TYPE_ECKD_DUMP;
+		else
+			return IPL_TYPE_ECKD;
 	}
 	return IPL_TYPE_UNKNOWN;
 }
@@ -325,7 +344,7 @@ static ssize_t ipl_vm_parm_show(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_ipl_vm_parm_attr =
-	__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
+	__ATTR(parm, 0444, ipl_vm_parm_show, NULL);
 
 static ssize_t sys_ipl_device_show(struct kobject *kobj,
 				   struct kobj_attribute *attr, char *page)
@@ -334,6 +353,10 @@ static ssize_t sys_ipl_device_show(struct kobject *kobj,
 	case IPL_TYPE_CCW:
 		return sprintf(page, "0.%x.%04x\n", ipl_block.ccw.ssid,
 			       ipl_block.ccw.devno);
+	case IPL_TYPE_ECKD:
+	case IPL_TYPE_ECKD_DUMP:
+		return sprintf(page, "0.%x.%04x\n", ipl_block.eckd.ssid,
+			       ipl_block.eckd.devno);
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
 		return sprintf(page, "0.0.%04x\n", ipl_block.fcp.devno);
@@ -346,7 +369,7 @@ static ssize_t sys_ipl_device_show(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_ipl_device_attr =
-	__ATTR(device, S_IRUGO, sys_ipl_device_show, NULL);
+	__ATTR(device, 0444, sys_ipl_device_show, NULL);
 
 static ssize_t ipl_parameter_read(struct file *filp, struct kobject *kobj,
 				  struct bin_attribute *attr, char *buf,
@@ -356,7 +379,7 @@ static ssize_t ipl_parameter_read(struct file *filp, struct kobject *kobj,
 				       ipl_block.hdr.len);
 }
 static struct bin_attribute ipl_parameter_attr =
-	__BIN_ATTR(binary_parameter, S_IRUGO, ipl_parameter_read, NULL,
+	__BIN_ATTR(binary_parameter, 0444, ipl_parameter_read, NULL,
 		   PAGE_SIZE);
 
 static ssize_t ipl_scp_data_read(struct file *filp, struct kobject *kobj,
@@ -379,11 +402,24 @@ static ssize_t ipl_nvme_scp_data_read(struct file *filp, struct kobject *kobj,
 	return memory_read_from_buffer(buf, count, &off, scp_data, size);
 }
 
+static ssize_t ipl_eckd_scp_data_read(struct file *filp, struct kobject *kobj,
+				      struct bin_attribute *attr, char *buf,
+				      loff_t off, size_t count)
+{
+	unsigned int size = ipl_block.eckd.scp_data_len;
+	void *scp_data = &ipl_block.eckd.scp_data;
+
+	return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
 static struct bin_attribute ipl_scp_data_attr =
-	__BIN_ATTR(scp_data, S_IRUGO, ipl_scp_data_read, NULL, PAGE_SIZE);
+	__BIN_ATTR(scp_data, 0444, ipl_scp_data_read, NULL, PAGE_SIZE);
 
 static struct bin_attribute ipl_nvme_scp_data_attr =
-	__BIN_ATTR(scp_data, S_IRUGO, ipl_nvme_scp_data_read, NULL, PAGE_SIZE);
+	__BIN_ATTR(scp_data, 0444, ipl_nvme_scp_data_read, NULL, PAGE_SIZE);
+
+static struct bin_attribute ipl_eckd_scp_data_attr =
+	__BIN_ATTR(scp_data, 0444, ipl_eckd_scp_data_read, NULL, PAGE_SIZE);
 
 static struct bin_attribute *ipl_fcp_bin_attrs[] = {
 	&ipl_parameter_attr,
@@ -397,6 +433,12 @@ static struct bin_attribute *ipl_nvme_bin_attrs[] = {
 	NULL,
 };
 
+static struct bin_attribute *ipl_eckd_bin_attrs[] = {
+	&ipl_parameter_attr,
+	&ipl_eckd_scp_data_attr,
+	NULL,
+};
+
 /* FCP ipl device attributes */
 
 DEFINE_IPL_ATTR_RO(ipl_fcp, wwpn, "0x%016llx\n",
@@ -418,6 +460,84 @@ DEFINE_IPL_ATTR_RO(ipl_nvme, bootprog, "%lld\n",
 DEFINE_IPL_ATTR_RO(ipl_nvme, br_lba, "%lld\n",
 		   (unsigned long long)ipl_block.nvme.br_lba);
 
+/* ECKD ipl device attributes */
+DEFINE_IPL_ATTR_RO(ipl_eckd, bootprog, "%lld\n",
+		   (unsigned long long)ipl_block.eckd.bootprog);
+
+#define IPL_ATTR_BR_CHR_SHOW_FN(_name, _ipb)				\
+static ssize_t eckd_##_name##_br_chr_show(struct kobject *kobj,		\
+					  struct kobj_attribute *attr,	\
+					  char *buf)			\
+{									\
+	struct ipl_pb0_eckd *ipb = &(_ipb);				\
+									\
+	if (!ipb->br_chr.cyl &&						\
+	    !ipb->br_chr.head &&					\
+	    !ipb->br_chr.record)					\
+		return sprintf(buf, "auto\n");				\
+									\
+	return sprintf(buf, "0x%x,0x%x,0x%x\n",				\
+			ipb->br_chr.cyl,				\
+			ipb->br_chr.head,				\
+			ipb->br_chr.record);				\
+}
+
+#define IPL_ATTR_BR_CHR_STORE_FN(_name, _ipb)				\
+static ssize_t eckd_##_name##_br_chr_store(struct kobject *kobj,	\
+					   struct kobj_attribute *attr,	\
+					   const char *buf, size_t len)	\
+{									\
+	struct ipl_pb0_eckd *ipb = &(_ipb);				\
+	unsigned long args[3] = { 0 };					\
+	char *p, *p1, *tmp = NULL;					\
+	int i, rc;							\
+									\
+	if (!strncmp(buf, "auto", 4))					\
+		goto out;						\
+									\
+	tmp = kstrdup(buf, GFP_KERNEL);					\
+	p = tmp;							\
+	for (i = 0; i < 3; i++) {					\
+		p1 = strsep(&p, ", ");					\
+		if (!p1) {						\
+			rc = -EINVAL;					\
+			goto err;					\
+		}							\
+		rc = kstrtoul(p1, 0, args + i);				\
+		if (rc)							\
+			goto err;					\
+	}								\
+									\
+	rc = -EINVAL;							\
+	if (i != 3)							\
+		goto err;						\
+									\
+	if ((args[0] || args[1]) && !args[2])				\
+		goto err;						\
+									\
+	if (args[0] > UINT_MAX || args[1] > 255 || args[2] > 255)	\
+		goto err;						\
+									\
+out:									\
+	ipb->br_chr.cyl = args[0];					\
+	ipb->br_chr.head = args[1];					\
+	ipb->br_chr.record = args[2];					\
+	rc = len;							\
+err:									\
+	kfree(tmp);							\
+	return rc;							\
+}
+
+IPL_ATTR_BR_CHR_SHOW_FN(ipl, ipl_block.eckd);
+static struct kobj_attribute sys_ipl_eckd_br_chr_attr =
+	__ATTR(br_chr, 0644, eckd_ipl_br_chr_show, NULL);
+
+IPL_ATTR_BR_CHR_SHOW_FN(reipl, reipl_block_eckd->eckd);
+IPL_ATTR_BR_CHR_STORE_FN(reipl, reipl_block_eckd->eckd);
+
+static struct kobj_attribute sys_reipl_eckd_br_chr_attr =
+	__ATTR(br_chr, 0644, eckd_reipl_br_chr_show, eckd_reipl_br_chr_store);
+
 static ssize_t ipl_ccw_loadparm_show(struct kobject *kobj,
 				     struct kobj_attribute *attr, char *page)
 {
@@ -469,6 +589,20 @@ static struct attribute_group ipl_nvme_attr_group = {
 	.bin_attrs = ipl_nvme_bin_attrs,
 };
 
+static struct attribute *ipl_eckd_attrs[] = {
+	&sys_ipl_type_attr.attr,
+	&sys_ipl_eckd_bootprog_attr.attr,
+	&sys_ipl_eckd_br_chr_attr.attr,
+	&sys_ipl_device_attr.attr,
+	&sys_ipl_secure_attr.attr,
+	&sys_ipl_has_secure_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_eckd_attr_group = {
+	.attrs = ipl_eckd_attrs,
+	.bin_attrs = ipl_eckd_bin_attrs,
+};
 
 /* CCW ipl device attributes */
 
@@ -541,6 +675,9 @@ static int __init ipl_init(void)
 			rc = sysfs_create_group(&ipl_kset->kobj,
 						&ipl_ccw_attr_group_lpar);
 		break;
+	case IPL_TYPE_ECKD:
+		rc = sysfs_create_group(&ipl_kset->kobj, &ipl_eckd_attr_group);
+		break;
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
 		rc = sysfs_create_group(&ipl_kset->kobj, &ipl_fcp_attr_group);
@@ -642,11 +779,11 @@ static ssize_t reipl_ccw_vmparm_store(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_reipl_nss_vmparm_attr =
-	__ATTR(parm, S_IRUGO | S_IWUSR, reipl_nss_vmparm_show,
-					reipl_nss_vmparm_store);
+	__ATTR(parm, 0644, reipl_nss_vmparm_show,
+	       reipl_nss_vmparm_store);
 static struct kobj_attribute sys_reipl_ccw_vmparm_attr =
-	__ATTR(parm, S_IRUGO | S_IWUSR, reipl_ccw_vmparm_show,
-					reipl_ccw_vmparm_store);
+	__ATTR(parm, 0644, reipl_ccw_vmparm_show,
+	       reipl_ccw_vmparm_store);
 
 /* FCP reipl device attributes */
 
@@ -686,7 +823,7 @@ static ssize_t reipl_fcp_scpdata_write(struct file *filp, struct kobject *kobj,
 	return count;
 }
 static struct bin_attribute sys_reipl_fcp_scp_data_attr =
-	__BIN_ATTR(scp_data, (S_IRUGO | S_IWUSR), reipl_fcp_scpdata_read,
+	__BIN_ATTR(scp_data, 0644, reipl_fcp_scpdata_read,
 		   reipl_fcp_scpdata_write, DIAG308_SCPDATA_SIZE);
 
 static struct bin_attribute *reipl_fcp_bin_attrs[] = {
@@ -766,8 +903,8 @@ static ssize_t reipl_fcp_loadparm_store(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_reipl_fcp_loadparm_attr =
-	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_fcp_loadparm_show,
-					    reipl_fcp_loadparm_store);
+	__ATTR(loadparm, 0644, reipl_fcp_loadparm_show,
+	       reipl_fcp_loadparm_store);
 
 static ssize_t reipl_fcp_clear_show(struct kobject *kobj,
 				    struct kobj_attribute *attr, char *page)
@@ -779,7 +916,7 @@ static ssize_t reipl_fcp_clear_store(struct kobject *kobj,
 				     struct kobj_attribute *attr,
 				     const char *buf, size_t len)
 {
-	if (strtobool(buf, &reipl_fcp_clear) < 0)
+	if (kstrtobool(buf, &reipl_fcp_clear) < 0)
 		return -EINVAL;
 	return len;
 }
@@ -840,7 +977,7 @@ static ssize_t reipl_nvme_scpdata_write(struct file *filp, struct kobject *kobj,
 }
 
 static struct bin_attribute sys_reipl_nvme_scp_data_attr =
-	__BIN_ATTR(scp_data, (S_IRUGO | S_IWUSR), reipl_nvme_scpdata_read,
+	__BIN_ATTR(scp_data, 0644, reipl_nvme_scpdata_read,
 		   reipl_nvme_scpdata_write, DIAG308_SCPDATA_SIZE);
 
 static struct bin_attribute *reipl_nvme_bin_attrs[] = {
@@ -872,8 +1009,8 @@ static ssize_t reipl_nvme_loadparm_store(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_reipl_nvme_loadparm_attr =
-	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_nvme_loadparm_show,
-					    reipl_nvme_loadparm_store);
+	__ATTR(loadparm, 0644, reipl_nvme_loadparm_show,
+	       reipl_nvme_loadparm_store);
 
 static struct attribute *reipl_nvme_attrs[] = {
 	&sys_reipl_nvme_fid_attr.attr,
@@ -899,7 +1036,7 @@ static ssize_t reipl_nvme_clear_store(struct kobject *kobj,
 				      struct kobj_attribute *attr,
 				      const char *buf, size_t len)
 {
-	if (strtobool(buf, &reipl_nvme_clear) < 0)
+	if (kstrtobool(buf, &reipl_nvme_clear) < 0)
 		return -EINVAL;
 	return len;
 }
@@ -939,8 +1076,8 @@ static ssize_t reipl_ccw_loadparm_store(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_reipl_ccw_loadparm_attr =
-	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_ccw_loadparm_show,
-					    reipl_ccw_loadparm_store);
+	__ATTR(loadparm, 0644, reipl_ccw_loadparm_show,
+	       reipl_ccw_loadparm_store);
 
 static ssize_t reipl_ccw_clear_show(struct kobject *kobj,
 				    struct kobj_attribute *attr, char *page)
@@ -952,7 +1089,7 @@ static ssize_t reipl_ccw_clear_store(struct kobject *kobj,
 				     struct kobj_attribute *attr,
 				     const char *buf, size_t len)
 {
-	if (strtobool(buf, &reipl_ccw_clear) < 0)
+	if (kstrtobool(buf, &reipl_ccw_clear) < 0)
 		return -EINVAL;
 	return len;
 }
@@ -985,6 +1122,85 @@ static struct attribute_group reipl_ccw_attr_group_lpar = {
 	.attrs = reipl_ccw_attrs_lpar,
 };
 
+/* ECKD reipl device attributes */
+
+static ssize_t reipl_eckd_scpdata_read(struct file *filp, struct kobject *kobj,
+				       struct bin_attribute *attr,
+				       char *buf, loff_t off, size_t count)
+{
+	size_t size = reipl_block_eckd->eckd.scp_data_len;
+	void *scp_data = reipl_block_eckd->eckd.scp_data;
+
+	return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
+static ssize_t reipl_eckd_scpdata_write(struct file *filp, struct kobject *kobj,
+					struct bin_attribute *attr,
+					char *buf, loff_t off, size_t count)
+{
+	size_t scpdata_len = count;
+	size_t padding;
+
+	if (off)
+		return -EINVAL;
+
+	memcpy(reipl_block_eckd->eckd.scp_data, buf, count);
+	if (scpdata_len % 8) {
+		padding = 8 - (scpdata_len % 8);
+		memset(reipl_block_eckd->eckd.scp_data + scpdata_len,
+		       0, padding);
+		scpdata_len += padding;
+	}
+
+	reipl_block_eckd->hdr.len = IPL_BP_ECKD_LEN + scpdata_len;
+	reipl_block_eckd->eckd.len = IPL_BP0_ECKD_LEN + scpdata_len;
+	reipl_block_eckd->eckd.scp_data_len = scpdata_len;
+
+	return count;
+}
+
+static struct bin_attribute sys_reipl_eckd_scp_data_attr =
+	__BIN_ATTR(scp_data, 0644, reipl_eckd_scpdata_read,
+		   reipl_eckd_scpdata_write, DIAG308_SCPDATA_SIZE);
+
+static struct bin_attribute *reipl_eckd_bin_attrs[] = {
+	&sys_reipl_eckd_scp_data_attr,
+	NULL,
+};
+
+DEFINE_IPL_CCW_ATTR_RW(reipl_eckd, device, reipl_block_eckd->eckd);
+DEFINE_IPL_ATTR_RW(reipl_eckd, bootprog, "%lld\n", "%lld\n",
+		   reipl_block_eckd->eckd.bootprog);
+
+static struct attribute *reipl_eckd_attrs[] = {
+	&sys_reipl_eckd_device_attr.attr,
+	&sys_reipl_eckd_bootprog_attr.attr,
+	&sys_reipl_eckd_br_chr_attr.attr,
+	NULL,
+};
+
+static struct attribute_group reipl_eckd_attr_group = {
+	.attrs = reipl_eckd_attrs,
+	.bin_attrs = reipl_eckd_bin_attrs
+};
+
+static ssize_t reipl_eckd_clear_show(struct kobject *kobj,
+				     struct kobj_attribute *attr, char *page)
+{
+	return sprintf(page, "%u\n", reipl_eckd_clear);
+}
+
+static ssize_t reipl_eckd_clear_store(struct kobject *kobj,
+				      struct kobj_attribute *attr,
+				      const char *buf, size_t len)
+{
+	if (strtobool(buf, &reipl_eckd_clear) < 0)
+		return -EINVAL;
+	return len;
+}
+
+static struct kobj_attribute sys_reipl_eckd_clear_attr =
+	__ATTR(clear, 0644, reipl_eckd_clear_show, reipl_eckd_clear_store);
 
 /* NSS reipl device attributes */
 static void reipl_get_ascii_nss_name(char *dst,
@@ -1032,12 +1248,12 @@ static ssize_t reipl_nss_name_store(struct kobject *kobj,
 }
 
 static struct kobj_attribute sys_reipl_nss_name_attr =
-	__ATTR(name, S_IRUGO | S_IWUSR, reipl_nss_name_show,
-					reipl_nss_name_store);
+	__ATTR(name, 0644, reipl_nss_name_show,
+	       reipl_nss_name_store);
 
 static struct kobj_attribute sys_reipl_nss_loadparm_attr =
-	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_nss_loadparm_show,
-					    reipl_nss_loadparm_store);
+	__ATTR(loadparm, 0644, reipl_nss_loadparm_show,
+	       reipl_nss_loadparm_store);
 
 static struct attribute *reipl_nss_attrs[] = {
 	&sys_reipl_nss_name_attr.attr,
@@ -1068,6 +1284,9 @@ static int reipl_set_type(enum ipl_type type)
 	case IPL_TYPE_CCW:
 		reipl_block_actual = reipl_block_ccw;
 		break;
+	case IPL_TYPE_ECKD:
+		reipl_block_actual = reipl_block_eckd;
+		break;
 	case IPL_TYPE_FCP:
 		reipl_block_actual = reipl_block_fcp;
 		break;
@@ -1098,6 +1317,8 @@ static ssize_t reipl_type_store(struct kobject *kobj,
 
 	if (strncmp(buf, IPL_CCW_STR, strlen(IPL_CCW_STR)) == 0)
 		rc = reipl_set_type(IPL_TYPE_CCW);
+	else if (strncmp(buf, IPL_ECKD_STR, strlen(IPL_ECKD_STR)) == 0)
+		rc = reipl_set_type(IPL_TYPE_ECKD);
 	else if (strncmp(buf, IPL_FCP_STR, strlen(IPL_FCP_STR)) == 0)
 		rc = reipl_set_type(IPL_TYPE_FCP);
 	else if (strncmp(buf, IPL_NVME_STR, strlen(IPL_NVME_STR)) == 0)
@@ -1113,6 +1334,7 @@ static struct kobj_attribute reipl_type_attr =
 static struct kset *reipl_kset;
 static struct kset *reipl_fcp_kset;
 static struct kset *reipl_nvme_kset;
+static struct kset *reipl_eckd_kset;
 
 static void __reipl_run(void *unused)
 {
@@ -1124,6 +1346,13 @@ static void __reipl_run(void *unused)
 		else
 			diag308(DIAG308_LOAD_NORMAL_DUMP, NULL);
 		break;
+	case IPL_TYPE_ECKD:
+		diag308(DIAG308_SET, reipl_block_eckd);
+		if (reipl_eckd_clear)
+			diag308(DIAG308_LOAD_CLEAR, NULL);
+		else
+			diag308(DIAG308_LOAD_NORMAL, NULL);
+		break;
 	case IPL_TYPE_FCP:
 		diag308(DIAG308_SET, reipl_block_fcp);
 		if (reipl_fcp_clear)
@@ -1147,6 +1376,7 @@ static void __reipl_run(void *unused)
 		break;
 	case IPL_TYPE_FCP_DUMP:
 	case IPL_TYPE_NVME_DUMP:
+	case IPL_TYPE_ECKD_DUMP:
 		break;
 	}
 	disabled_wait();
@@ -1344,6 +1574,58 @@ out1:
 	return rc;
 }
 
+static int __init reipl_eckd_init(void)
+{
+	int rc;
+
+	if (!sclp.has_sipl_eckd)
+		return 0;
+
+	reipl_block_eckd = (void *)get_zeroed_page(GFP_KERNEL);
+	if (!reipl_block_eckd)
+		return -ENOMEM;
+
+	/* sysfs: create kset for mixing attr group and bin attrs */
+	reipl_eckd_kset = kset_create_and_add(IPL_ECKD_STR, NULL,
+					      &reipl_kset->kobj);
+	if (!reipl_eckd_kset) {
+		free_page((unsigned long)reipl_block_eckd);
+		return -ENOMEM;
+	}
+
+	rc = sysfs_create_group(&reipl_eckd_kset->kobj, &reipl_eckd_attr_group);
+	if (rc)
+		goto out1;
+
+	if (test_facility(141)) {
+		rc = sysfs_create_file(&reipl_eckd_kset->kobj,
+				       &sys_reipl_eckd_clear_attr.attr);
+		if (rc)
+			goto out2;
+	} else {
+		reipl_eckd_clear = true;
+	}
+
+	if (ipl_info.type == IPL_TYPE_ECKD) {
+		memcpy(reipl_block_eckd, &ipl_block, sizeof(ipl_block));
+	} else {
+		reipl_block_eckd->hdr.len = IPL_BP_ECKD_LEN;
+		reipl_block_eckd->hdr.version = IPL_PARM_BLOCK_VERSION;
+		reipl_block_eckd->eckd.len = IPL_BP0_ECKD_LEN;
+		reipl_block_eckd->eckd.pbt = IPL_PBT_ECKD;
+		reipl_block_eckd->eckd.opt = IPL_PB0_ECKD_OPT_IPL;
+	}
+	reipl_capabilities |= IPL_TYPE_ECKD;
+	return 0;
+
+out2:
+	sysfs_remove_group(&reipl_eckd_kset->kobj, &reipl_eckd_attr_group);
+out1:
+	kset_unregister(reipl_eckd_kset);
+	free_page((unsigned long)reipl_block_eckd);
+	return rc;
+}
+
 static int __init reipl_type_init(void)
 {
 	enum ipl_type reipl_type = ipl_info.type;
@@ -1365,6 +1647,9 @@ static int __init reipl_type_init(void)
 	} else if (reipl_block->pb0_hdr.pbt == IPL_PBT_CCW) {
 		memcpy(reipl_block_ccw, reipl_block, size);
 		reipl_type = IPL_TYPE_CCW;
+	} else if (reipl_block->pb0_hdr.pbt == IPL_PBT_ECKD) {
+		memcpy(reipl_block_eckd, reipl_block, size);
+		reipl_type = IPL_TYPE_ECKD;
 	}
 out:
 	return reipl_set_type(reipl_type);
@@ -1385,6 +1670,9 @@ static int __init reipl_init(void)
 	rc = reipl_ccw_init();
 	if (rc)
 		return rc;
+	rc = reipl_eckd_init();
+	if (rc)
+		return rc;
 	rc = reipl_fcp_init();
 	if (rc)
 		return rc;
@@ -1457,6 +1745,29 @@ static struct attribute_group dump_nvme_attr_group = {
 	.attrs = dump_nvme_attrs,
 };
 
+/* ECKD dump device attributes */
+DEFINE_IPL_CCW_ATTR_RW(dump_eckd, device, dump_block_eckd->eckd);
+DEFINE_IPL_ATTR_RW(dump_eckd, bootprog, "%lld\n", "%llx\n",
+		   dump_block_eckd->eckd.bootprog);
+
+IPL_ATTR_BR_CHR_SHOW_FN(dump, dump_block_eckd->eckd);
+IPL_ATTR_BR_CHR_STORE_FN(dump, dump_block_eckd->eckd);
+
+static struct kobj_attribute sys_dump_eckd_br_chr_attr =
+	__ATTR(br_chr, 0644, eckd_dump_br_chr_show, eckd_dump_br_chr_store);
+
+static struct attribute *dump_eckd_attrs[] = {
+	&sys_dump_eckd_device_attr.attr,
+	&sys_dump_eckd_bootprog_attr.attr,
+	&sys_dump_eckd_br_chr_attr.attr,
+	NULL,
+};
+
+static struct attribute_group dump_eckd_attr_group = {
+	.name  = IPL_ECKD_STR,
+	.attrs = dump_eckd_attrs,
+};
+
 /* CCW dump device attributes */
 DEFINE_IPL_CCW_ATTR_RW(dump_ccw, device, dump_block_ccw->ccw);
 
@@ -1496,6 +1807,8 @@ static ssize_t dump_type_store(struct kobject *kobj,
 		rc = dump_set_type(DUMP_TYPE_NONE);
 	else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0)
 		rc = dump_set_type(DUMP_TYPE_CCW);
+	else if (strncmp(buf, DUMP_ECKD_STR, strlen(DUMP_ECKD_STR)) == 0)
+		rc = dump_set_type(DUMP_TYPE_ECKD);
 	else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0)
 		rc = dump_set_type(DUMP_TYPE_FCP);
 	else if (strncmp(buf, DUMP_NVME_STR, strlen(DUMP_NVME_STR)) == 0)
@@ -1524,6 +1837,9 @@ static void __dump_run(void *unused)
 	case DUMP_TYPE_CCW:
 		diag308_dump(dump_block_ccw);
 		break;
+	case DUMP_TYPE_ECKD:
+		diag308_dump(dump_block_eckd);
+		break;
 	case DUMP_TYPE_FCP:
 		diag308_dump(dump_block_fcp);
 		break;
@@ -1609,6 +1925,29 @@ static int __init dump_nvme_init(void)
 	return 0;
 }
 
+static int __init dump_eckd_init(void)
+{
+	int rc;
+
+	if (!sclp_ipl_info.has_dump || !sclp.has_sipl_eckd)
+		return 0; /* LDIPL DUMP is not installed */
+	dump_block_eckd = (void *)get_zeroed_page(GFP_KERNEL);
+	if (!dump_block_eckd)
+		return -ENOMEM;
+	rc = sysfs_create_group(&dump_kset->kobj, &dump_eckd_attr_group);
+	if (rc) {
+		free_page((unsigned long)dump_block_eckd);
+		return rc;
+	}
+	dump_block_eckd->hdr.len = IPL_BP_ECKD_LEN;
+	dump_block_eckd->hdr.version = IPL_PARM_BLOCK_VERSION;
+	dump_block_eckd->eckd.len = IPL_BP0_ECKD_LEN;
+	dump_block_eckd->eckd.pbt = IPL_PBT_ECKD;
+	dump_block_eckd->eckd.opt = IPL_PB0_ECKD_OPT_DUMP;
+	dump_capabilities |= DUMP_TYPE_ECKD;
+	return 0;
+}
+
 static int __init dump_init(void)
 {
 	int rc;
@@ -1624,6 +1963,9 @@ static int __init dump_init(void)
 	rc = dump_ccw_init();
 	if (rc)
 		return rc;
+	rc = dump_eckd_init();
+	if (rc)
+		return rc;
 	rc = dump_fcp_init();
 	if (rc)
 		return rc;
@@ -2057,6 +2399,11 @@ void __init setup_ipl(void)
 		ipl_info.data.ccw.dev_id.ssid = ipl_block.ccw.ssid;
 		ipl_info.data.ccw.dev_id.devno = ipl_block.ccw.devno;
 		break;
+	case IPL_TYPE_ECKD:
+	case IPL_TYPE_ECKD_DUMP:
+		ipl_info.data.eckd.dev_id.ssid = ipl_block.eckd.ssid;
+		ipl_info.data.eckd.dev_id.devno = ipl_block.eckd.devno;
+		break;
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
 		ipl_info.data.fcp.dev_id.ssid = 0;
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 0032bdbe8e3f..401f9c933ff9 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -24,6 +24,7 @@
 #include <asm/set_memory.h>
 #include <asm/sections.h>
 #include <asm/dis.h>
+#include "kprobes.h"
 #include "entry.h"
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe);
@@ -31,8 +32,6 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 struct kretprobe_blackpoint kretprobe_blacklist[] = { };
 
-DEFINE_INSN_CACHE_OPS(s390_insn);
-
 static int insn_page_in_use;
 
 void *alloc_insn_page(void)
diff --git a/arch/s390/kernel/kprobes.h b/arch/s390/kernel/kprobes.h
new file mode 100644
index 000000000000..dc3ed5098ee7
--- /dev/null
+++ b/arch/s390/kernel/kprobes.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef _ARCH_S390_KPROBES_H
+#define _ARCH_S390_KPROBES_H
+
+#include <linux/kprobes.h>
+
+DEFINE_INSN_CACHE_OPS(s390_insn);
+
+#endif
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 31cb9b00a36b..5dbf274719a9 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -19,7 +19,7 @@
 #include <linux/time.h>
 #include <linux/module.h>
 #include <linux/sched/signal.h>
-
+#include <linux/kvm_host.h>
 #include <linux/export.h>
 #include <asm/lowcore.h>
 #include <asm/smp.h>
@@ -31,8 +31,7 @@
 #include <asm/ctl_reg.h>
 #include <asm/asm-offsets.h>
 #include <asm/pai.h>
-
-#include <linux/kvm_host.h>
+#include <asm/vx-insn.h>
 
 struct mcck_struct {
 	unsigned int kill_task : 1;
@@ -43,21 +42,12 @@ struct mcck_struct {
 };
 
 static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
-static struct kmem_cache *mcesa_cache;
-static unsigned long mcesa_origin_lc;
 
 static inline int nmi_needs_mcesa(void)
 {
 	return MACHINE_HAS_VX || MACHINE_HAS_GS;
 }
 
-static inline unsigned long nmi_get_mcesa_size(void)
-{
-	if (MACHINE_HAS_GS)
-		return MCESA_MAX_SIZE;
-	return MCESA_MIN_SIZE;
-}
-
 /*
  * The initial machine check extended save area for the boot CPU.
  * It will be replaced on the boot CPU reinit with an allocated
@@ -75,36 +65,23 @@ void __init nmi_alloc_mcesa_early(u64 *mcesad)
 		*mcesad |= ilog2(MCESA_MAX_SIZE);
 }
 
-static void __init nmi_alloc_cache(void)
+int nmi_alloc_mcesa(u64 *mcesad)
 {
 	unsigned long size;
-
-	if (!nmi_needs_mcesa())
-		return;
-	size = nmi_get_mcesa_size();
-	if (size > MCESA_MIN_SIZE)
-		mcesa_origin_lc = ilog2(size);
-	/* create slab cache for the machine-check-extended-save-areas */
-	mcesa_cache = kmem_cache_create("nmi_save_areas", size, size, 0, NULL);
-	if (!mcesa_cache)
-		panic("Couldn't create nmi save area cache");
-}
-
-int __ref nmi_alloc_mcesa(u64 *mcesad)
-{
-	unsigned long origin;
+	void *origin;
 
 	*mcesad = 0;
 	if (!nmi_needs_mcesa())
 		return 0;
-	if (!mcesa_cache)
-		nmi_alloc_cache();
-	origin = (unsigned long) kmem_cache_alloc(mcesa_cache, GFP_KERNEL);
+	size = MACHINE_HAS_GS ? MCESA_MAX_SIZE : MCESA_MIN_SIZE;
+	origin = kmalloc(size, GFP_KERNEL);
 	if (!origin)
 		return -ENOMEM;
 	/* The pointer is stored with mcesa_bits ORed in */
-	kmemleak_not_leak((void *) origin);
-	*mcesad = __pa(origin) | mcesa_origin_lc;
+	kmemleak_not_leak(origin);
+	*mcesad = __pa(origin);
+	if (MACHINE_HAS_GS)
+		*mcesad |= ilog2(MCESA_MAX_SIZE);
 	return 0;
 }
 
@@ -112,12 +89,64 @@ void nmi_free_mcesa(u64 *mcesad)
 {
 	if (!nmi_needs_mcesa())
 		return;
-	kmem_cache_free(mcesa_cache, __va(*mcesad & MCESA_ORIGIN_MASK));
+	kfree(__va(*mcesad & MCESA_ORIGIN_MASK));
+}
+
+static __always_inline char *nmi_puts(char *dest, const char *src)
+{
+	while (*src)
+		*dest++ = *src++;
+	*dest = 0;
+	return dest;
+}
+
+static __always_inline char *u64_to_hex(char *dest, u64 val)
+{
+	int i, num;
+
+	for (i = 1; i <= 16; i++) {
+		num = (val >> (64 - 4 * i)) & 0xf;
+		if (num >= 10)
+			*dest++ = 'A' + num - 10;
+		else
+			*dest++ = '0' + num;
+	}
+	*dest = 0;
+	return dest;
 }
 
 static notrace void s390_handle_damage(void)
 {
+	union ctlreg0 cr0, cr0_new;
+	char message[100];
+	psw_t psw_save;
+	char *ptr;
+
 	smp_emergency_stop();
+	diag_amode31_ops.diag308_reset();
+	ptr = nmi_puts(message, "System stopped due to unrecoverable machine check, code: 0x");
+	u64_to_hex(ptr, S390_lowcore.mcck_interruption_code);
+
+	/*
+	 * Disable low address protection and make machine check new PSW a
+	 * disabled wait PSW. Any additional machine check cannot be handled.
+	 */
+	__ctl_store(cr0.val, 0, 0);
+	cr0_new = cr0;
+	cr0_new.lap = 0;
+	__ctl_load(cr0_new.val, 0, 0);
+	psw_save = S390_lowcore.mcck_new_psw;
+	psw_bits(S390_lowcore.mcck_new_psw).io = 0;
+	psw_bits(S390_lowcore.mcck_new_psw).ext = 0;
+	psw_bits(S390_lowcore.mcck_new_psw).wait = 1;
+	sclp_emergency_printk(message);
+
+	/*
+	 * Restore machine check new PSW and control register 0 to original
+	 * values. This makes possible system dump analysis easier.
+	 */
+	S390_lowcore.mcck_new_psw = psw_save;
+	__ctl_load(cr0.val, 0, 0);
 	disabled_wait();
 	while (1);
 }
@@ -181,10 +210,10 @@ void noinstr s390_handle_mcck(struct pt_regs *regs)
 	trace_hardirqs_on();
 }
 /*
- * returns 0 if all required registers are available
+ * returns 0 if register contents could be validated
  * returns 1 otherwise
  */
-static int notrace s390_validate_registers(union mci mci, int umode)
+static int notrace s390_validate_registers(union mci mci)
 {
 	struct mcesa *mcesa;
 	void *fpt_save_area;
@@ -195,45 +224,15 @@ static int notrace s390_validate_registers(union mci mci, int umode)
 	kill_task = 0;
 	zero = 0;
 
-	if (!mci.gr) {
-		/*
-		 * General purpose registers couldn't be restored and have
-		 * unknown contents. Stop system or terminate process.
-		 */
-		if (!umode)
-			s390_handle_damage();
+	if (!mci.gr || !mci.fp)
 		kill_task = 1;
-	}
-	if (!mci.fp) {
-		/*
-		 * Floating point registers can't be restored. If the
-		 * kernel currently uses floating point registers the
-		 * system is stopped. If the process has its floating
-		 * pointer registers loaded it is terminated.
-		 */
-		if (S390_lowcore.fpu_flags & KERNEL_VXR_V0V7)
-			s390_handle_damage();
-		if (!test_cpu_flag(CIF_FPU))
-			kill_task = 1;
-	}
 	fpt_save_area = &S390_lowcore.floating_pt_save_area;
 	if (!mci.fc) {
-		/*
-		 * Floating point control register can't be restored.
-		 * If the kernel currently uses the floating pointer
-		 * registers and needs the FPC register the system is
-		 * stopped. If the process has its floating pointer
-		 * registers loaded it is terminated. Otherwise the
-		 * FPC is just validated.
-		 */
-		if (S390_lowcore.fpu_flags & KERNEL_FPC)
-			s390_handle_damage();
+		kill_task = 1;
 		asm volatile(
 			"	lfpc	%0\n"
 			:
 			: "Q" (zero));
-		if (!test_cpu_flag(CIF_FPU))
-			kill_task = 1;
 	} else {
 		asm volatile(
 			"	lfpc	%0\n"
@@ -275,26 +274,15 @@ static int notrace s390_validate_registers(union mci mci, int umode)
 		 * appropriate actions. The host vector or FPU values have been
 		 * saved by KVM and will be restored by KVM.
 		 */
-		if (!mci.vr && !test_cpu_flag(CIF_MCCK_GUEST)) {
-			/*
-			 * Vector registers can't be restored. If the kernel
-			 * currently uses vector registers the system is
-			 * stopped. If the process has its vector registers
-			 * loaded it is terminated. Otherwise just validate
-			 * the registers.
-			 */
-			if (S390_lowcore.fpu_flags & KERNEL_VXR)
-				s390_handle_damage();
-			if (!test_cpu_flag(CIF_FPU))
-				kill_task = 1;
-		}
+		if (!mci.vr && !test_cpu_flag(CIF_MCCK_GUEST))
+			kill_task = 1;
 		cr0.val = S390_lowcore.cregs_save_area[0];
 		cr0.afp = cr0.vx = 1;
 		__ctl_load(cr0.val, 0, 0);
 		asm volatile(
 			"	la	1,%0\n"
-			"	.word	0xe70f,0x1000,0x0036\n" /* vlm 0,15,0(1) */
-			"	.word	0xe70f,0x1100,0x0c36\n" /* vlm 16,31,256(1) */
+			"	VLM	0,15,0,1\n"
+			"	VLM	16,31,256,1\n"
 			:
 			: "Q" (*(struct vx_array *)mcesa->vector_save_area)
 			: "1");
@@ -306,13 +294,8 @@ static int notrace s390_validate_registers(union mci mci, int umode)
 		:
 		: "a" (&S390_lowcore.access_regs_save_area)
 		: "memory");
-	if (!mci.ar) {
-		/*
-		 * Access registers have unknown contents.
-		 * Terminating task.
-		 */
+	if (!mci.ar)
 		kill_task = 1;
-	}
 	/* Validate guarded storage registers */
 	cr2.val = S390_lowcore.cregs_save_area[2];
 	if (cr2.gse) {
@@ -451,7 +434,9 @@ int notrace s390_do_machine_check(struct pt_regs *regs)
 			s390_handle_damage();
 		}
 	}
-	if (s390_validate_registers(mci, user_mode(regs))) {
+	if (s390_validate_registers(mci)) {
+		if (!user_mode(regs))
+			s390_handle_damage();
 		/*
 		 * Couldn't restore all register contents for the
 		 * user space process -> mark task for termination.
@@ -480,7 +465,21 @@ int notrace s390_do_machine_check(struct pt_regs *regs)
 			mcck->stp_queue |= stp_island_check();
 		mcck_pending = 1;
 	}
-
+	/*
+	 * Reinject storage related machine checks into the guest if they
+	 * happen when the guest is running.
+	 */
+	if (!test_cpu_flag(CIF_MCCK_GUEST)) {
+		/* Storage error uncorrected */
+		if (mci.se)
+			s390_handle_damage();
+		/* Storage key-error uncorrected */
+		if (mci.ke)
+			s390_handle_damage();
+		/* Storage degradation */
+		if (mci.ds && mci.fa)
+			s390_handle_damage();
+	}
 	if (mci.cp) {
 		/* Channel report word pending */
 		mcck->channel_report = 1;
diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c
index 6826e2a69a21..985e243a2ed8 100644
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@@ -35,9 +35,9 @@ struct pai_userdata {
 struct paicrypt_map {
 	unsigned long *page;		/* Page for CPU to store counters */
 	struct pai_userdata *save;	/* Page to store no-zero counters */
-	unsigned int users;		/* # of PAI crypto users */
-	unsigned int sampler;		/* # of PAI crypto samplers */
-	unsigned int counter;		/* # of PAI crypto counters */
+	unsigned int active_events;	/* # of PAI crypto users */
+	unsigned int refcnt;		/* Reference count mapped buffers */
+	enum paievt_mode mode;		/* Type of event */
 	struct perf_event *event;	/* Perf event for sampling */
 };
 
@@ -56,15 +56,11 @@ static void paicrypt_event_destroy(struct perf_event *event)
 	cpump->event = NULL;
 	static_branch_dec(&pai_key);
 	mutex_lock(&pai_reserve_mutex);
-	if (event->attr.sample_period)
-		cpump->sampler -= 1;
-	else
-		cpump->counter -= 1;
-	debug_sprintf_event(cfm_dbg, 5, "%s event %#llx cpu %d"
-			    " sampler %d counter %d\n", __func__,
-			    event->attr.config, event->cpu, cpump->sampler,
-			    cpump->counter);
-	if (!cpump->counter && !cpump->sampler) {
+	debug_sprintf_event(cfm_dbg, 5, "%s event %#llx cpu %d users %d"
+			    " mode %d refcnt %d\n", __func__,
+			    event->attr.config, event->cpu,
+			    cpump->active_events, cpump->mode, cpump->refcnt);
+	if (!--cpump->refcnt) {
 		debug_sprintf_event(cfm_dbg, 4, "%s page %#lx save %p\n",
 				    __func__, (unsigned long)cpump->page,
 				    cpump->save);
@@ -72,6 +68,7 @@ static void paicrypt_event_destroy(struct perf_event *event)
 		cpump->page = NULL;
 		kvfree(cpump->save);
 		cpump->save = NULL;
+		cpump->mode = PAI_MODE_NONE;
 	}
 	mutex_unlock(&pai_reserve_mutex);
 }
@@ -136,17 +133,14 @@ static u64 paicrypt_getall(struct perf_event *event)
  */
 static int paicrypt_busy(struct perf_event_attr *a, struct paicrypt_map *cpump)
 {
-	unsigned int *use_ptr;
 	int rc = 0;
 
 	mutex_lock(&pai_reserve_mutex);
 	if (a->sample_period) {		/* Sampling requested */
-		use_ptr = &cpump->sampler;
-		if (cpump->counter || cpump->sampler)
+		if (cpump->mode != PAI_MODE_NONE)
 			rc = -EBUSY;	/* ... sampling/counting active */
 	} else {			/* Counting requested */
-		use_ptr = &cpump->counter;
-		if (cpump->sampler)
+		if (cpump->mode == PAI_MODE_SAMPLING)
 			rc = -EBUSY;	/* ... and sampling active */
 	}
 	if (rc)
@@ -172,12 +166,16 @@ static int paicrypt_busy(struct perf_event_attr *a, struct paicrypt_map *cpump)
 	rc = 0;
 
 unlock:
-	/* If rc is non-zero, do not increment counter/sampler. */
-	if (!rc)
-		*use_ptr += 1;
-	debug_sprintf_event(cfm_dbg, 5, "%s sample_period %#llx sampler %d"
-			    " counter %d page %#lx save %p rc %d\n", __func__,
-			    a->sample_period, cpump->sampler, cpump->counter,
+	/* If rc is non-zero, do not set mode and reference count */
+	if (!rc) {
+		cpump->refcnt++;
+		cpump->mode = a->sample_period ? PAI_MODE_SAMPLING
+					       : PAI_MODE_COUNTING;
+	}
+	debug_sprintf_event(cfm_dbg, 5, "%s sample_period %#llx users %d"
+			    " mode %d refcnt %d page %#lx save %p rc %d\n",
+			    __func__, a->sample_period, cpump->active_events,
+			    cpump->mode, cpump->refcnt,
 			    (unsigned long)cpump->page, cpump->save, rc);
 	mutex_unlock(&pai_reserve_mutex);
 	return rc;
@@ -262,7 +260,7 @@ static int paicrypt_add(struct perf_event *event, int flags)
 	struct paicrypt_map *cpump = this_cpu_ptr(&paicrypt_map);
 	unsigned long ccd;
 
-	if (cpump->users++ == 0) {
+	if (++cpump->active_events == 1) {
 		ccd = virt_to_phys(cpump->page) | PAI_CRYPTO_KERNEL_OFFSET;
 		WRITE_ONCE(S390_lowcore.ccd, ccd);
 		__ctl_set_bit(0, 50);
@@ -293,7 +291,7 @@ static void paicrypt_del(struct perf_event *event, int flags)
 	if (!event->attr.sample_period)
 		/* Only counting needs to read counter */
 		paicrypt_stop(event, PERF_EF_UPDATE);
-	if (cpump->users-- == 1) {
+	if (--cpump->active_events == 0) {
 		__ctl_clear_bit(0, 50);
 		WRITE_ONCE(S390_lowcore.ccd, 0);
 	}
@@ -379,7 +377,7 @@ static int paicrypt_push_sample(void)
 /* Called on schedule-in and schedule-out. No access to event structure,
  * but for sampling only event CRYPTO_ALL is allowed.
  */
-static void paicrypt_sched_task(struct perf_event_context *ctx, bool sched_in)
+static void paicrypt_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	/* We started with a clean page on event installation. So read out
 	 * results on schedule_out and if page was dirty, clear values.
diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c
index 74b53c531e0c..1138f57baae3 100644
--- a/arch/s390/kernel/perf_pai_ext.c
+++ b/arch/s390/kernel/perf_pai_ext.c
@@ -28,12 +28,6 @@
 static debug_info_t *paiext_dbg;
 static unsigned int paiext_cnt;	/* Extracted with QPACI instruction */
 
-enum paiext_mode {
-	PAI_MODE_NONE,
-	PAI_MODE_SAMPLING,
-	PAI_MODE_COUNTER,
-};
-
 struct pai_userdata {
 	u16 num;
 	u64 value;
@@ -54,7 +48,7 @@ struct paiext_cb {		/* PAI extension 1 control block */
 struct paiext_map {
 	unsigned long *area;		/* Area for CPU to store counters */
 	struct pai_userdata *save;	/* Area to store non-zero counters */
-	enum paiext_mode mode;		/* Type of event */
+	enum paievt_mode mode;		/* Type of event */
 	unsigned int active_events;	/* # of PAI Extension users */
 	unsigned int refcnt;
 	struct perf_event *event;	/* Perf event for sampling */
@@ -192,14 +186,14 @@ static int paiext_alloc(struct perf_event_attr *a, struct perf_event *event)
 			goto unlock;
 		}
 		cpump->mode = a->sample_period ? PAI_MODE_SAMPLING
-					       : PAI_MODE_COUNTER;
+					       : PAI_MODE_COUNTING;
 	} else {
 		/* Multiple invocation, check whats active.
 		 * Supported are multiple counter events or only one sampling
 		 * event concurrently at any one time.
 		 */
 		if (cpump->mode == PAI_MODE_SAMPLING ||
-		    (cpump->mode == PAI_MODE_COUNTER && a->sample_period)) {
+		    (cpump->mode == PAI_MODE_COUNTING && a->sample_period)) {
 			rc = -EBUSY;
 			goto unlock;
 		}
@@ -472,7 +466,7 @@ static int paiext_push_sample(void)
 /* Called on schedule-in and schedule-out. No access to event structure,
  * but for sampling only event NNPA_ALL is allowed.
  */
-static void paiext_sched_task(struct perf_event_context *ctx, bool sched_in)
+static void paiext_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	/* We started with a clean page on event installation. So read out
 	 * results on schedule_out and if page was dirty, clear values.
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ab19ddb09d65..2094f575c532 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -437,7 +437,7 @@ static void __init setup_lowcore_dat_off(void)
 	lc->svc_new_psw.addr = (unsigned long) system_call;
 	lc->program_new_psw.mask = int_psw_mask | PSW_MASK_MCHECK;
 	lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
-	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
+	lc->mcck_new_psw.mask = int_psw_mask;
 	lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
 	lc->io_new_psw.mask = int_psw_mask | PSW_MASK_MCHECK;
 	lc->io_new_psw.addr = (unsigned long) io_int_handler;
@@ -512,6 +512,7 @@ static void __init setup_lowcore_dat_on(void)
 	S390_lowcore.external_new_psw.mask |= PSW_MASK_DAT;
 	S390_lowcore.svc_new_psw.mask |= PSW_MASK_DAT;
 	S390_lowcore.program_new_psw.mask |= PSW_MASK_DAT;
+	S390_lowcore.mcck_new_psw.mask |= PSW_MASK_DAT;
 	S390_lowcore.io_new_psw.mask |= PSW_MASK_DAT;
 	__ctl_set_bit(0, 28);
 	__ctl_store(S390_lowcore.cregs_save_area, 0, 15);
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 119328e1e2b3..ff7bf4432229 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -44,21 +44,6 @@ struct vdso_data *arch_get_vdso_data(void *vvar_page)
 	return (struct vdso_data *)(vvar_page);
 }
 
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_mm == current->mm))
-		return current->nsproxy->time_ns->vvar_page;
-	/*
-	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
-	 * through interfaces like /proc/$pid/mem or
-	 * process_vm_{readv,writev}() as long as there's no .access()
-	 * in special_mapping_vmops().
-	 * For more details check_vma_flags() and __access_remote_vm()
-	 */
-	WARN(1, "vvar_page accessed remotely");
-	return NULL;
-}
-
 /*
  * The VVAR page layout depends on whether a task belongs to the root or
  * non-root time namespace. Whenever a task changes its namespace, the VVAR
@@ -84,11 +69,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 	mmap_read_unlock(mm);
 	return 0;
 }
-#else
-static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	return NULL;
-}
 #endif
 
 static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 94138f8f0c1c..ace2541ababd 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -546,8 +546,10 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_CEI))
 		scb_s->eca |= scb_o->eca & ECA_CEI;
 	/* Epoch Extension */
-	if (test_kvm_facility(vcpu->kvm, 139))
+	if (test_kvm_facility(vcpu->kvm, 139)) {
 		scb_s->ecd |= scb_o->ecd & ECD_MEF;
+		scb_s->epdx = scb_o->epdx;
+	}
 
 	/* etoken */
 	if (test_kvm_facility(vcpu->kvm, 156))
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 97d66a3e60fb..1a25d456d865 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -31,6 +31,7 @@
 #include <linux/cma.h>
 #include <linux/gfp.h>
 #include <linux/dma-direct.h>
+#include <linux/percpu.h>
 #include <asm/processor.h>
 #include <linux/uaccess.h>
 #include <asm/pgalloc.h>
@@ -207,9 +208,6 @@ void free_initmem(void)
 	__set_memory((unsigned long)_sinittext,
 		     (unsigned long)(_einittext - _sinittext) >> PAGE_SHIFT,
 		     SET_MEMORY_RW | SET_MEMORY_NX);
-	free_reserved_area(sclp_early_sccb,
-			   sclp_early_sccb + EXT_SCCB_READ_SCP,
-			   POISON_FREE_INITMEM, "unused early sccb");
 	free_initmem_default(POISON_FREE_INITMEM);
 }
 
@@ -222,6 +220,41 @@ unsigned long memory_block_size_bytes(void)
 	return max_t(unsigned long, MIN_MEMORY_BLOCK_SIZE, sclp.rzm);
 }
 
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	return LOCAL_DISTANCE;
+}
+
+static int __init pcpu_cpu_to_node(int cpu)
+{
+	return 0;
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Always reserve area for module percpu variables.  That's
+	 * what the legacy allocator did.
+	 */
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, PAGE_SIZE,
+				    pcpu_cpu_distance,
+				    pcpu_cpu_to_node);
+	if (rc < 0)
+		panic("Failed to initialize percpu areas.");
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+
 #ifdef CONFIG_MEMORY_HOTPLUG
 
 #ifdef CONFIG_CMA
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index d5ea09d78938..1e2ea706aa22 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -58,17 +58,6 @@ void __init cmma_init(void)
 		cmma_flag = 2;
 }
 
-static inline unsigned char get_page_state(struct page *page)
-{
-	unsigned char state;
-
-	asm volatile("	.insn	rrf,0xb9ab0000,%0,%1,%2,0"
-		     : "=&d" (state)
-		     : "a" (page_to_phys(page)),
-		       "i" (ESSA_GET_STATE));
-	return state & 0x3f;
-}
-
 static inline void set_page_unused(struct page *page, int order)
 {
 	int i, rc;
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index a2b42a63a53b..4ab0cf829999 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -132,7 +132,7 @@ static int zpci_clear_irq(struct zpci_dev *zdev)
 static int zpci_set_irq_affinity(struct irq_data *data, const struct cpumask *dest,
 				 bool force)
 {
-	struct msi_desc *entry = irq_get_msi_desc(data->irq);
+	struct msi_desc *entry = irq_data_get_msi_desc(data);
 	struct msi_msg msg = entry->msg;
 	int cpu_addr = smp_cpu_get_cpu_address(cpumask_first(dest));
 
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 619c18699459..376e95fa77bc 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -10,7 +10,8 @@ CONFIG_USER_NS=y
 CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_AIO is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index d00fafc021e1..1d5fd67a3949 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -11,7 +11,8 @@ CONFIG_USER_NS=y
 CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 122216123e63..78e0e7be57ee 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -21,7 +21,8 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index c0b6f40d01cc..e078b193a78a 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -9,7 +9,8 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7706=y
 CONFIG_MEMORY_START=0x0c000000
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 32ec6eb1eabc..aa353dff7f19 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -20,7 +20,8 @@ CONFIG_USER_NS=y
 CONFIG_PID_NS=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLOB=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_PROFILING=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index a779418ceba9..3bc9736bddb1 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -693,6 +693,7 @@ static inline unsigned long pmd_dirty(pmd_t pmd)
 	return pte_dirty(pte);
 }
 
+#define pmd_young pmd_young
 static inline unsigned long pmd_young(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index 5903e2b598aa..a4f0a19fbe14 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -381,7 +381,6 @@ config UML_PCI_OVER_VIRTIO
 	select UML_IOMEM_EMULATION
 	select UML_DMA_EMULATION
 	select PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
 	select PCI_LOCKLESS_CONFIG
 
 config UML_PCI_OVER_VIRTIO_DEVICE_ID
diff --git a/arch/um/include/asm/pci.h b/arch/um/include/asm/pci.h
index 34fe4921b5fa..238d2e7faff8 100644
--- a/arch/um/include/asm/pci.h
+++ b/arch/um/include/asm/pci.h
@@ -7,7 +7,7 @@
 /* Generic PCI */
 #include <asm-generic/pci.h>
 
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 /*
  * This is a bit of an annoying hack, and it assumes we only have
  * the virt-pci (if anything). Which is true, but still.
diff --git a/arch/um/kernel/kmsg_dump.c b/arch/um/kernel/kmsg_dump.c
index 0224fcb36e22..427dd5a61a38 100644
--- a/arch/um/kernel/kmsg_dump.c
+++ b/arch/um/kernel/kmsg_dump.c
@@ -16,20 +16,26 @@ static void kmsg_dumper_stdout(struct kmsg_dumper *dumper,
 	struct console *con;
 	unsigned long flags;
 	size_t len = 0;
+	int cookie;
 
-	/* only dump kmsg when no console is available */
-	if (!console_trylock())
-		return;
+	/*
+	 * If no consoles are available to output crash information, dump
+	 * the kmsg buffer to stdout.
+	 */
 
-	for_each_console(con) {
-		if(strcmp(con->name, "tty") == 0 &&
-		   (con->flags & (CON_ENABLED | CON_CONSDEV)) != 0) {
+	cookie = console_srcu_read_lock();
+	for_each_console_srcu(con) {
+		/*
+		 * The ttynull console and disabled consoles are ignored
+		 * since they cannot output. All other consoles are
+		 * expected to output the crash information.
+		 */
+		if (strcmp(con->name, "ttynull") != 0 &&
+		    (console_srcu_read_flags(con) & CON_ENABLED)) {
 			break;
 		}
 	}
-
-	console_unlock();
-
+	console_srcu_read_unlock(cookie);
 	if (con)
 		return;
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 67745ceab0db..276b3baf1c50 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -69,6 +69,7 @@ config X86
 	select ARCH_ENABLE_THP_MIGRATION if X86_64 && TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE	if !X86_PAE
@@ -81,6 +82,7 @@ config X86
 	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PTE_DEVMAP		if X86_64
@@ -462,8 +464,8 @@ config X86_X2APIC
 
 	  Some Intel systems circa 2022 and later are locked into x2APIC mode
 	  and can not fall back to the legacy APIC modes if SGX or TDX are
-	  enabled in the BIOS.  They will be unable to boot without enabling
-	  this option.
+	  enabled in the BIOS. They will boot with very reduced functionality
+	  without enabling this option.
 
 	  If you don't know what to do here, say N.
 
@@ -1109,7 +1111,6 @@ config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
 	select IRQ_DOMAIN_HIERARCHY
-	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 
 config X86_IO_APIC
 	def_bool y
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 9860ca5979f8..9e38ffaadb5d 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -83,7 +83,7 @@ cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
 
 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
-	@$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
+	@$(kecho) 'Kernel: $@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
 
 OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
 $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index e476bcbd9b42..454757fbdfe5 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -668,7 +668,7 @@ static bool process_mem_region(struct mem_vector *region,
 		}
 	}
 #endif
-	return 0;
+	return false;
 }
 
 #ifdef CONFIG_EFI
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index 8a3fff9128bb..1c8541ae3b3a 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -350,7 +350,7 @@ static int _kstrtoul(const char *s, unsigned int base, unsigned long *res)
 }
 
 /**
- * kstrtoul - convert a string to an unsigned long
+ * boot_kstrtoul - convert a string to an unsigned long
  * @s: The start of the string. The string must be null-terminated, and may also
  *  include a single newline before its terminating null. The first character
  *  may also be a plus sign, but not a minus sign.
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index b8998cf0508a..cfd4c95b9f04 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -5,6 +5,8 @@
 #define pr_fmt(fmt)     "tdx: " fmt
 
 #include <linux/cpufeature.h>
+#include <linux/export.h>
+#include <linux/io.h>
 #include <asm/coco.h>
 #include <asm/tdx.h>
 #include <asm/vmx.h>
@@ -15,6 +17,7 @@
 /* TDX module Call Leaf IDs */
 #define TDX_GET_INFO			1
 #define TDX_GET_VEINFO			3
+#define TDX_GET_REPORT			4
 #define TDX_ACCEPT_PAGE			6
 
 /* TDX hypercall Leaf IDs */
@@ -36,6 +39,12 @@
 
 #define ATTR_SEPT_VE_DISABLE	BIT(28)
 
+/* TDX Module call error codes */
+#define TDCALL_RETURN_CODE(a)	((a) >> 32)
+#define TDCALL_INVALID_OPERAND	0xc0000100
+
+#define TDREPORT_SUBTYPE_0	0
+
 /*
  * Wrapper for standard use of __tdx_hypercall with no output aside from
  * return code.
@@ -100,6 +109,37 @@ static inline void tdx_module_call(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
 		panic("TDCALL %lld failed (Buggy TDX module!)\n", fn);
 }
 
+/**
+ * tdx_mcall_get_report0() - Wrapper to get TDREPORT0 (a.k.a. TDREPORT
+ *                           subtype 0) using TDG.MR.REPORT TDCALL.
+ * @reportdata: Address of the input buffer which contains user-defined
+ *              REPORTDATA to be included into TDREPORT.
+ * @tdreport: Address of the output buffer to store TDREPORT.
+ *
+ * Refer to section titled "TDG.MR.REPORT leaf" in the TDX Module
+ * v1.0 specification for more information on TDG.MR.REPORT TDCALL.
+ * It is used in the TDX guest driver module to get the TDREPORT0.
+ *
+ * Return 0 on success, -EINVAL for invalid operands, or -EIO on
+ * other TDCALL failures.
+ */
+int tdx_mcall_get_report0(u8 *reportdata, u8 *tdreport)
+{
+	u64 ret;
+
+	ret = __tdx_module_call(TDX_GET_REPORT, virt_to_phys(tdreport),
+				virt_to_phys(reportdata), TDREPORT_SUBTYPE_0,
+				0, NULL);
+	if (ret) {
+		if (TDCALL_RETURN_CODE(ret) == TDCALL_INVALID_OPERAND)
+			return -EINVAL;
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tdx_mcall_get_report0);
+
 static void tdx_parse_tdinfo(u64 *cc_mask)
 {
 	struct tdx_module_output out;
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 4dd19819053a..59b93901660d 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -61,7 +61,7 @@ SYM_CODE_START(entry_SYSENTER_compat)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	/* Construct struct pt_regs on stack */
-	pushq	$__USER32_DS		/* pt_regs->ss */
+	pushq	$__USER_DS		/* pt_regs->ss */
 	pushq	$0			/* pt_regs->sp = 0 (placeholder) */
 
 	/*
@@ -197,7 +197,7 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_safe_stack, SYM_L_GLOBAL)
 	ANNOTATE_NOENDBR
 
 	/* Construct struct pt_regs on stack */
-	pushq	$__USER32_DS		/* pt_regs->ss */
+	pushq	$__USER_DS		/* pt_regs->ss */
 	pushq	%r8			/* pt_regs->sp */
 	pushq	%r11			/* pt_regs->flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
diff --git a/arch/x86/entry/vdso/vdso.lds.S b/arch/x86/entry/vdso/vdso.lds.S
index 4bf48462fca7..e8c60ae7a7c8 100644
--- a/arch/x86/entry/vdso/vdso.lds.S
+++ b/arch/x86/entry/vdso/vdso.lds.S
@@ -27,7 +27,9 @@ VERSION {
 		__vdso_time;
 		clock_getres;
 		__vdso_clock_getres;
+#ifdef CONFIG_X86_SGX
 		__vdso_sgx_enter_enclave;
+#endif
 	local: *;
 	};
 }
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index d45c5fcfeac2..b8f3f9b9e53c 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -98,24 +98,6 @@ static int vdso_mremap(const struct vm_special_mapping *sm,
 }
 
 #ifdef CONFIG_TIME_NS
-static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_mm == current->mm))
-		return current->nsproxy->time_ns->vvar_page;
-
-	/*
-	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
-	 * through interfaces like /proc/$pid/mem or
-	 * process_vm_{readv,writev}() as long as there's no .access()
-	 * in special_mapping_vmops().
-	 * For more details check_vma_flags() and __access_remote_vm()
-	 */
-
-	WARN(1, "vvar_page accessed remotely");
-
-	return NULL;
-}
-
 /*
  * The vvar page layout depends on whether a task belongs to the root or
  * non-root time namespace. Whenever a task changes its namespace, the VVAR
@@ -140,11 +122,6 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 
 	return 0;
 }
-#else
-static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
-{
-	return NULL;
-}
 #endif
 
 static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
@@ -210,11 +187,10 @@ static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
 					pgprot_decrypted(vma->vm_page_prot));
 		}
 	} else if (sym_offset == image->sym_hvclock_page) {
-		struct ms_hyperv_tsc_page *tsc_pg = hv_get_tsc_page();
+		pfn = hv_get_tsc_pfn();
 
-		if (tsc_pg && vclock_was_used(VDSO_CLOCKMODE_HVCLOCK))
-			return vmf_insert_pfn(vma, vmf->address,
-					virt_to_phys(tsc_pg) >> PAGE_SHIFT);
+		if (pfn && vclock_was_used(VDSO_CLOCKMODE_HVCLOCK))
+			return vmf_insert_pfn(vma, vmf->address, pfn);
 	} else if (sym_offset == image->sym_timens_page) {
 		struct page *timens_page = find_timens_vvar_page(vma);
 
diff --git a/arch/x86/events/amd/brs.c b/arch/x86/events/amd/brs.c
index f1bff153d945..58461fa18b6f 100644
--- a/arch/x86/events/amd/brs.c
+++ b/arch/x86/events/amd/brs.c
@@ -384,7 +384,7 @@ static void amd_brs_poison_buffer(void)
  * On ctxswin, sched_in = true, called after the PMU has started
  * On ctxswout, sched_in = false, called before the PMU is stopped
  */
-void amd_pmu_brs_sched_task(struct perf_event_context *ctx, bool sched_in)
+void amd_pmu_brs_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index 8b70237c33f7..d6f3703e4119 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -861,8 +861,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	pmu_enabled = cpuc->enabled;
 	cpuc->enabled = 0;
 
-	/* stop everything (includes BRS) */
-	amd_pmu_disable_all();
+	amd_brs_disable_all();
 
 	/* Drain BRS is in use (could be inactive) */
 	if (cpuc->lbr_users)
@@ -873,7 +872,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc->enabled = pmu_enabled;
 	if (pmu_enabled)
-		amd_pmu_enable_all(0);
+		amd_brs_enable_all();
 
 	return amd_pmu_adjust_nmi_window(handled);
 }
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 4cb710efbdd9..da3f5ebac4e1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -631,7 +631,7 @@ static const struct attribute_group *op_attr_update[] = {
 
 static struct perf_ibs perf_ibs_fetch = {
 	.pmu = {
-		.task_ctx_nr	= perf_invalid_context,
+		.task_ctx_nr	= perf_hw_context,
 
 		.event_init	= perf_ibs_init,
 		.add		= perf_ibs_add,
@@ -655,7 +655,7 @@ static struct perf_ibs perf_ibs_fetch = {
 
 static struct perf_ibs perf_ibs_op = {
 	.pmu = {
-		.task_ctx_nr	= perf_invalid_context,
+		.task_ctx_nr	= perf_hw_context,
 
 		.event_init	= perf_ibs_init,
 		.add		= perf_ibs_add,
diff --git a/arch/x86/events/amd/lbr.c b/arch/x86/events/amd/lbr.c
index 38a75216c12c..eb31f850841a 100644
--- a/arch/x86/events/amd/lbr.c
+++ b/arch/x86/events/amd/lbr.c
@@ -352,7 +352,7 @@ void amd_pmu_lbr_add(struct perf_event *event)
 		cpuc->br_sel = reg->reg;
 	}
 
-	perf_sched_cb_inc(event->ctx->pmu);
+	perf_sched_cb_inc(event->pmu);
 
 	if (!cpuc->lbr_users++ && !event->total_time_running)
 		amd_pmu_lbr_reset();
@@ -370,10 +370,10 @@ void amd_pmu_lbr_del(struct perf_event *event)
 
 	cpuc->lbr_users--;
 	WARN_ON_ONCE(cpuc->lbr_users < 0);
-	perf_sched_cb_dec(event->ctx->pmu);
+	perf_sched_cb_dec(event->pmu);
 }
 
-void amd_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
+void amd_pmu_lbr_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
diff --git a/arch/x86/events/amd/uncore.c b/arch/x86/events/amd/uncore.c
index d568afc705d2..83f15fe411b3 100644
--- a/arch/x86/events/amd/uncore.c
+++ b/arch/x86/events/amd/uncore.c
@@ -553,6 +553,7 @@ static void uncore_clean_online(void)
 
 	hlist_for_each_entry_safe(uncore, n, &uncore_unused_list, node) {
 		hlist_del(&uncore->node);
+		kfree(uncore->events);
 		kfree(uncore);
 	}
 }
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index b30b8bbcd1e2..85a63a41c471 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -90,6 +90,8 @@ DEFINE_STATIC_CALL_NULL(x86_pmu_swap_task_ctx, *x86_pmu.swap_task_ctx);
 DEFINE_STATIC_CALL_NULL(x86_pmu_drain_pebs,   *x86_pmu.drain_pebs);
 DEFINE_STATIC_CALL_NULL(x86_pmu_pebs_aliases, *x86_pmu.pebs_aliases);
 
+DEFINE_STATIC_CALL_NULL(x86_pmu_filter, *x86_pmu.filter);
+
 /*
  * This one is magic, it will get called even when PMU init fails (because
  * there is no PMU), in which case it should simply return NULL.
@@ -2031,6 +2033,7 @@ static void x86_pmu_static_call_update(void)
 	static_call_update(x86_pmu_pebs_aliases, x86_pmu.pebs_aliases);
 
 	static_call_update(x86_pmu_guest_get_msrs, x86_pmu.guest_get_msrs);
+	static_call_update(x86_pmu_filter, x86_pmu.filter);
 }
 
 static void _x86_pmu_read(struct perf_event *event)
@@ -2052,23 +2055,6 @@ void x86_pmu_show_pmu_cap(int num_counters, int num_counters_fixed,
 	pr_info("... event mask:             %016Lx\n", intel_ctrl);
 }
 
-/*
- * The generic code is not hybrid friendly. The hybrid_pmu->pmu
- * of the first registered PMU is unconditionally assigned to
- * each possible cpuctx->ctx.pmu.
- * Update the correct hybrid PMU to the cpuctx->ctx.pmu.
- */
-void x86_pmu_update_cpu_context(struct pmu *pmu, int cpu)
-{
-	struct perf_cpu_context *cpuctx;
-
-	if (!pmu->pmu_cpu_context)
-		return;
-
-	cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
-	cpuctx->ctx.pmu = pmu;
-}
-
 static int __init init_hw_perf_events(void)
 {
 	struct x86_pmu_quirk *quirk;
@@ -2175,13 +2161,9 @@ static int __init init_hw_perf_events(void)
 		if (err)
 			goto out2;
 	} else {
-		u8 cpu_type = get_this_hybrid_cpu_type();
 		struct x86_hybrid_pmu *hybrid_pmu;
 		int i, j;
 
-		if (!cpu_type && x86_pmu.get_hybrid_cpu_type)
-			cpu_type = x86_pmu.get_hybrid_cpu_type();
-
 		for (i = 0; i < x86_pmu.num_hybrid_pmus; i++) {
 			hybrid_pmu = &x86_pmu.hybrid_pmu[i];
 
@@ -2195,9 +2177,6 @@ static int __init init_hw_perf_events(void)
 						(hybrid_pmu->cpu_type == hybrid_big) ? PERF_TYPE_RAW : -1);
 			if (err)
 				break;
-
-			if (cpu_type == hybrid_pmu->cpu_type)
-				x86_pmu_update_cpu_context(&hybrid_pmu->pmu, raw_smp_processor_id());
 		}
 
 		if (i < x86_pmu.num_hybrid_pmus) {
@@ -2646,15 +2625,15 @@ static const struct attribute_group *x86_pmu_attr_groups[] = {
 	NULL,
 };
 
-static void x86_pmu_sched_task(struct perf_event_context *ctx, bool sched_in)
+static void x86_pmu_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
-	static_call_cond(x86_pmu_sched_task)(ctx, sched_in);
+	static_call_cond(x86_pmu_sched_task)(pmu_ctx, sched_in);
 }
 
-static void x86_pmu_swap_task_ctx(struct perf_event_context *prev,
-				  struct perf_event_context *next)
+static void x86_pmu_swap_task_ctx(struct perf_event_pmu_context *prev_epc,
+				  struct perf_event_pmu_context *next_epc)
 {
-	static_call_cond(x86_pmu_swap_task_ctx)(prev, next);
+	static_call_cond(x86_pmu_swap_task_ctx)(prev_epc, next_epc);
 }
 
 void perf_check_microcode(void)
@@ -2689,12 +2668,13 @@ static int x86_pmu_aux_output_match(struct perf_event *event)
 	return 0;
 }
 
-static int x86_pmu_filter_match(struct perf_event *event)
+static bool x86_pmu_filter(struct pmu *pmu, int cpu)
 {
-	if (x86_pmu.filter_match)
-		return x86_pmu.filter_match(event);
+	bool ret = false;
 
-	return 1;
+	static_call_cond(x86_pmu_filter)(pmu, cpu, &ret);
+
+	return ret;
 }
 
 static struct pmu pmu = {
@@ -2725,7 +2705,7 @@ static struct pmu pmu = {
 
 	.aux_output_match	= x86_pmu_aux_output_match,
 
-	.filter_match		= x86_pmu_filter_match,
+	.filter			= x86_pmu_filter,
 };
 
 void arch_perf_update_userpage(struct perf_event *event,
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 1b92bf05fd65..dfd2c124cdf8 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4536,8 +4536,6 @@ end:
 	cpumask_set_cpu(cpu, &pmu->supported_cpus);
 	cpuc->pmu = &pmu->pmu;
 
-	x86_pmu_update_cpu_context(&pmu->pmu, cpu);
-
 	return true;
 }
 
@@ -4671,17 +4669,17 @@ static void intel_pmu_cpu_dead(int cpu)
 		cpumask_clear_cpu(cpu, &hybrid_pmu(cpuc->pmu)->supported_cpus);
 }
 
-static void intel_pmu_sched_task(struct perf_event_context *ctx,
+static void intel_pmu_sched_task(struct perf_event_pmu_context *pmu_ctx,
 				 bool sched_in)
 {
-	intel_pmu_pebs_sched_task(ctx, sched_in);
-	intel_pmu_lbr_sched_task(ctx, sched_in);
+	intel_pmu_pebs_sched_task(pmu_ctx, sched_in);
+	intel_pmu_lbr_sched_task(pmu_ctx, sched_in);
 }
 
-static void intel_pmu_swap_task_ctx(struct perf_event_context *prev,
-				    struct perf_event_context *next)
+static void intel_pmu_swap_task_ctx(struct perf_event_pmu_context *prev_epc,
+				    struct perf_event_pmu_context *next_epc)
 {
-	intel_pmu_lbr_swap_task_ctx(prev, next);
+	intel_pmu_lbr_swap_task_ctx(prev_epc, next_epc);
 }
 
 static int intel_pmu_check_period(struct perf_event *event, u64 value)
@@ -4705,12 +4703,11 @@ static int intel_pmu_aux_output_match(struct perf_event *event)
 	return is_intel_pt_event(event);
 }
 
-static int intel_pmu_filter_match(struct perf_event *event)
+static void intel_pmu_filter(struct pmu *pmu, int cpu, bool *ret)
 {
-	struct x86_hybrid_pmu *pmu = hybrid_pmu(event->pmu);
-	unsigned int cpu = smp_processor_id();
+	struct x86_hybrid_pmu *hpmu = hybrid_pmu(pmu);
 
-	return cpumask_test_cpu(cpu, &pmu->supported_cpus);
+	*ret = !cpumask_test_cpu(cpu, &hpmu->supported_cpus);
 }
 
 PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63");
@@ -6413,7 +6410,7 @@ __init int intel_pmu_init(void)
 		static_call_update(intel_pmu_set_topdown_event_period,
 				   &adl_set_topdown_event_period);
 
-		x86_pmu.filter_match = intel_pmu_filter_match;
+		x86_pmu.filter = intel_pmu_filter;
 		x86_pmu.get_event_constraints = adl_get_event_constraints;
 		x86_pmu.hw_config = adl_hw_config;
 		x86_pmu.limit_period = spr_limit_period;
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 446d2833efa7..88e58b6ee73c 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1069,7 +1069,7 @@ static inline bool pebs_needs_sched_cb(struct cpu_hw_events *cpuc)
 	return cpuc->n_pebs && (cpuc->n_pebs == cpuc->n_large_pebs);
 }
 
-void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
+void intel_pmu_pebs_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
@@ -1177,7 +1177,7 @@ static void
 pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
 		  struct perf_event *event, bool add)
 {
-	struct pmu *pmu = event->ctx->pmu;
+	struct pmu *pmu = event->pmu;
 	/*
 	 * Make sure we get updated with the first PEBS
 	 * event. It will trigger also during removal, but
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 8259d725054d..017baba56b01 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -515,21 +515,21 @@ static void __intel_pmu_lbr_save(void *ctx)
 	cpuc->last_log_id = ++task_context_opt(ctx)->log_id;
 }
 
-void intel_pmu_lbr_swap_task_ctx(struct perf_event_context *prev,
-				 struct perf_event_context *next)
+void intel_pmu_lbr_swap_task_ctx(struct perf_event_pmu_context *prev_epc,
+				 struct perf_event_pmu_context *next_epc)
 {
 	void *prev_ctx_data, *next_ctx_data;
 
-	swap(prev->task_ctx_data, next->task_ctx_data);
+	swap(prev_epc->task_ctx_data, next_epc->task_ctx_data);
 
 	/*
-	 * Architecture specific synchronization makes sense in
-	 * case both prev->task_ctx_data and next->task_ctx_data
+	 * Architecture specific synchronization makes sense in case
+	 * both prev_epc->task_ctx_data and next_epc->task_ctx_data
 	 * pointers are allocated.
 	 */
 
-	prev_ctx_data = next->task_ctx_data;
-	next_ctx_data = prev->task_ctx_data;
+	prev_ctx_data = next_epc->task_ctx_data;
+	next_ctx_data = prev_epc->task_ctx_data;
 
 	if (!prev_ctx_data || !next_ctx_data)
 		return;
@@ -538,7 +538,7 @@ void intel_pmu_lbr_swap_task_ctx(struct perf_event_context *prev,
 	     task_context_opt(next_ctx_data)->lbr_callstack_users);
 }
 
-void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
+void intel_pmu_lbr_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	void *task_ctx;
@@ -551,7 +551,7 @@ void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
 	 * the task was scheduled out, restore the stack. Otherwise flush
 	 * the LBR stack.
 	 */
-	task_ctx = ctx ? ctx->task_ctx_data : NULL;
+	task_ctx = pmu_ctx ? pmu_ctx->task_ctx_data : NULL;
 	if (task_ctx) {
 		if (sched_in)
 			__intel_pmu_lbr_restore(task_ctx);
@@ -587,8 +587,8 @@ void intel_pmu_lbr_add(struct perf_event *event)
 
 	cpuc->br_sel = event->hw.branch_reg.reg;
 
-	if (branch_user_callstack(cpuc->br_sel) && event->ctx->task_ctx_data)
-		task_context_opt(event->ctx->task_ctx_data)->lbr_callstack_users++;
+	if (branch_user_callstack(cpuc->br_sel) && event->pmu_ctx->task_ctx_data)
+		task_context_opt(event->pmu_ctx->task_ctx_data)->lbr_callstack_users++;
 
 	/*
 	 * Request pmu::sched_task() callback, which will fire inside the
@@ -611,7 +611,7 @@ void intel_pmu_lbr_add(struct perf_event *event)
 	 */
 	if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip > 0)
 		cpuc->lbr_pebs_users++;
-	perf_sched_cb_inc(event->ctx->pmu);
+	perf_sched_cb_inc(event->pmu);
 	if (!cpuc->lbr_users++ && !event->total_time_running)
 		intel_pmu_lbr_reset();
 }
@@ -664,8 +664,8 @@ void intel_pmu_lbr_del(struct perf_event *event)
 		return;
 
 	if (branch_user_callstack(cpuc->br_sel) &&
-	    event->ctx->task_ctx_data)
-		task_context_opt(event->ctx->task_ctx_data)->lbr_callstack_users--;
+	    event->pmu_ctx->task_ctx_data)
+		task_context_opt(event->pmu_ctx->task_ctx_data)->lbr_callstack_users--;
 
 	if (event->hw.flags & PERF_X86_EVENT_LBR_SELECT)
 		cpuc->lbr_select = 0;
@@ -675,7 +675,7 @@ void intel_pmu_lbr_del(struct perf_event *event)
 	cpuc->lbr_users--;
 	WARN_ON_ONCE(cpuc->lbr_users < 0);
 	WARN_ON_ONCE(cpuc->lbr_pebs_users < 0);
-	perf_sched_cb_dec(event->ctx->pmu);
+	perf_sched_cb_dec(event->pmu);
 }
 
 static inline bool vlbr_exclude_host(void)
diff --git a/arch/x86/events/intel/p4.c b/arch/x86/events/intel/p4.c
index 03bbcc2fa2ff..35936188db01 100644
--- a/arch/x86/events/intel/p4.c
+++ b/arch/x86/events/intel/p4.c
@@ -24,7 +24,7 @@ struct p4_event_bind {
 	unsigned int escr_msr[2];		/* ESCR MSR for this event */
 	unsigned int escr_emask;		/* valid ESCR EventMask bits */
 	unsigned int shared;			/* event is shared across threads */
-	char cntr[2][P4_CNTR_LIMIT];		/* counter index (offset), -1 on absence */
+	signed char cntr[2][P4_CNTR_LIMIT];	/* counter index (offset), -1 on absence */
 };
 
 struct p4_pebs_bind {
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 82ef87e9a897..42a55794004a 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -1263,6 +1263,15 @@ static int pt_buffer_try_single(struct pt_buffer *buf, int nr_pages)
 	if (1 << order != nr_pages)
 		goto out;
 
+	/*
+	 * Some processors cannot always support single range for more than
+	 * 4KB - refer errata TGL052, ADL037 and RPL017. Future processors might
+	 * also be affected, so for now rather than trying to keep track of
+	 * which ones, just disable it for all.
+	 */
+	if (nr_pages > 1)
+		goto out;
+
 	buf->single = true;
 	buf->nr_pages = nr_pages;
 	ret = 0;
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 2adeaf4de4df..e278e2e7c051 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -2,6 +2,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <asm/apicdef.h>
+#include <asm/intel-family.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 
 #include <linux/perf_event.h>
@@ -88,12 +89,12 @@ struct intel_uncore_type {
 	 * to identify which platform component each PMON block of that type is
 	 * supposed to monitor.
 	 */
-	struct intel_uncore_topology *topology;
+	struct intel_uncore_topology **topology;
 	/*
 	 * Optional callbacks for managing mapping of Uncore units to PMONs
 	 */
 	int (*get_topology)(struct intel_uncore_type *type);
-	int (*set_mapping)(struct intel_uncore_type *type);
+	void (*set_mapping)(struct intel_uncore_type *type);
 	void (*cleanup_mapping)(struct intel_uncore_type *type);
 };
 
@@ -178,11 +179,26 @@ struct freerunning_counters {
 	unsigned *box_offsets;
 };
 
-struct intel_uncore_topology {
-	u64 configuration;
+struct uncore_iio_topology {
+	int pci_bus_no;
 	int segment;
 };
 
+struct uncore_upi_topology {
+	int die_to;
+	int pmu_idx_to;
+	int enabled;
+};
+
+struct intel_uncore_topology {
+	int pmu_idx;
+	union {
+		void *untyped;
+		struct uncore_iio_topology *iio;
+		struct uncore_upi_topology *upi;
+	};
+};
+
 struct pci2phy_map {
 	struct list_head list;
 	int segment;
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 1ef4f7861e2e..1f4869227efb 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -1338,6 +1338,7 @@ static void __uncore_imc_init_box(struct intel_uncore_box *box,
 	/* MCHBAR is disabled */
 	if (!(mch_bar & BIT(0))) {
 		pr_warn("perf uncore: MCHBAR is disabled. Failed to map IMC free-running counters.\n");
+		pci_dev_put(pdev);
 		return;
 	}
 	mch_bar &= ~BIT(0);
@@ -1352,6 +1353,8 @@ static void __uncore_imc_init_box(struct intel_uncore_box *box,
 	box->io_addr = ioremap(addr, type->mmio_map_size);
 	if (!box->io_addr)
 		pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
+
+	pci_dev_put(pdev);
 }
 
 static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index ed869443efb2..44c2f879f708 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -445,6 +445,7 @@
 #define ICX_UPI_PCI_PMON_CTR0			0x320
 #define ICX_UPI_PCI_PMON_BOX_CTL		0x318
 #define ICX_UPI_CTL_UMASK_EXT			0xffffff
+#define ICX_UBOX_DID				0x3450
 
 /* ICX M3UPI*/
 #define ICX_M3UPI_PCI_PMON_CTL0			0xd8
@@ -457,6 +458,7 @@
 
 /* SPR */
 #define SPR_RAW_EVENT_MASK_EXT			0xffffff
+#define SPR_UBOX_DID				0x3250
 
 /* SPR CHA */
 #define SPR_CHA_PMON_CTL_TID_EN			(1 << 16)
@@ -1372,6 +1374,28 @@ static struct pci_driver snbep_uncore_pci_driver = {
 
 #define NODE_ID_MASK	0x7
 
+/* Each three bits from 0 to 23 of GIDNIDMAP register correspond Node ID. */
+#define GIDNIDMAP(config, id)	(((config) >> (3 * (id))) & 0x7)
+
+static int upi_nodeid_groupid(struct pci_dev *ubox_dev, int nodeid_loc, int idmap_loc,
+			      int *nodeid, int *groupid)
+{
+	int ret;
+
+	/* get the Node ID of the local register */
+	ret = pci_read_config_dword(ubox_dev, nodeid_loc, nodeid);
+	if (ret)
+		goto err;
+
+	*nodeid = *nodeid & NODE_ID_MASK;
+	/* get the Node ID mapping */
+	ret = pci_read_config_dword(ubox_dev, idmap_loc, groupid);
+	if (ret)
+		goto err;
+err:
+	return ret;
+}
+
 /*
  * build pci bus to socket mapping
  */
@@ -1397,13 +1421,8 @@ static int snbep_pci2phy_map_init(int devid, int nodeid_loc, int idmap_loc, bool
 		 * the topology.
 		 */
 		if (nr_node_ids <= 8) {
-			/* get the Node ID of the local register */
-			err = pci_read_config_dword(ubox_dev, nodeid_loc, &config);
-			if (err)
-				break;
-			nodeid = config & NODE_ID_MASK;
-			/* get the Node ID mapping */
-			err = pci_read_config_dword(ubox_dev, idmap_loc, &config);
+			err = upi_nodeid_groupid(ubox_dev, nodeid_loc, idmap_loc,
+						 &nodeid, &config);
 			if (err)
 				break;
 
@@ -1421,7 +1440,7 @@ static int snbep_pci2phy_map_init(int devid, int nodeid_loc, int idmap_loc, bool
 			 * to a particular node.
 			 */
 			for (i = 0; i < 8; i++) {
-				if (nodeid == ((config >> (3 * i)) & 0x7)) {
+				if (nodeid == GIDNIDMAP(config, i)) {
 					if (topology_max_die_per_package() > 1)
 						die_id = i;
 					else
@@ -2891,6 +2910,7 @@ static bool hswep_has_limit_sbox(unsigned int device)
 		return false;
 
 	pci_read_config_dword(dev, HSWEP_PCU_CAPID4_OFFET, &capid4);
+	pci_dev_put(dev);
 	if (!hswep_get_chop(capid4))
 		return true;
 
@@ -3699,10 +3719,16 @@ static struct intel_uncore_ops skx_uncore_iio_ops = {
 	.read_counter		= uncore_msr_read_counter,
 };
 
-static inline u8 skx_iio_stack(struct intel_uncore_pmu *pmu, int die)
+static struct intel_uncore_topology *pmu_topology(struct intel_uncore_pmu *pmu, int die)
 {
-	return pmu->type->topology[die].configuration >>
-	       (pmu->pmu_idx * BUS_NUM_STRIDE);
+	int idx;
+
+	for (idx = 0; idx < pmu->type->num_boxes; idx++) {
+		if (pmu->type->topology[die][idx].pmu_idx == pmu->pmu_idx)
+			return &pmu->type->topology[die][idx];
+	}
+
+	return NULL;
 }
 
 static umode_t
@@ -3710,8 +3736,9 @@ pmu_iio_mapping_visible(struct kobject *kobj, struct attribute *attr,
 			 int die, int zero_bus_pmu)
 {
 	struct intel_uncore_pmu *pmu = dev_to_uncore_pmu(kobj_to_dev(kobj));
+	struct intel_uncore_topology *pmut = pmu_topology(pmu, die);
 
-	return (!skx_iio_stack(pmu, die) && pmu->pmu_idx != zero_bus_pmu) ? 0 : attr->mode;
+	return (pmut && !pmut->iio->pci_bus_no && pmu->pmu_idx != zero_bus_pmu) ? 0 : attr->mode;
 }
 
 static umode_t
@@ -3727,9 +3754,10 @@ static ssize_t skx_iio_mapping_show(struct device *dev,
 	struct intel_uncore_pmu *pmu = dev_to_uncore_pmu(dev);
 	struct dev_ext_attribute *ea = to_dev_ext_attribute(attr);
 	long die = (long)ea->var;
+	struct intel_uncore_topology *pmut = pmu_topology(pmu, die);
 
-	return sprintf(buf, "%04x:%02x\n", pmu->type->topology[die].segment,
-					   skx_iio_stack(pmu, die));
+	return sprintf(buf, "%04x:%02x\n", pmut ? pmut->iio->segment : 0,
+					   pmut ? pmut->iio->pci_bus_no : 0);
 }
 
 static int skx_msr_cpu_bus_read(int cpu, u64 *topology)
@@ -3764,18 +3792,79 @@ static int die_to_cpu(int die)
 	return res;
 }
 
-static int skx_iio_get_topology(struct intel_uncore_type *type)
+enum {
+	IIO_TOPOLOGY_TYPE,
+	UPI_TOPOLOGY_TYPE,
+	TOPOLOGY_MAX
+};
+
+static const size_t topology_size[TOPOLOGY_MAX] = {
+	sizeof(*((struct intel_uncore_topology *)NULL)->iio),
+	sizeof(*((struct intel_uncore_topology *)NULL)->upi)
+};
+
+static int pmu_alloc_topology(struct intel_uncore_type *type, int topology_type)
 {
-	int die, ret = -EPERM;
+	int die, idx;
+	struct intel_uncore_topology **topology;
+
+	if (!type->num_boxes)
+		return -EPERM;
 
-	type->topology = kcalloc(uncore_max_dies(), sizeof(*type->topology),
-				 GFP_KERNEL);
-	if (!type->topology)
-		return -ENOMEM;
+	topology = kcalloc(uncore_max_dies(), sizeof(*topology), GFP_KERNEL);
+	if (!topology)
+		goto err;
 
 	for (die = 0; die < uncore_max_dies(); die++) {
-		ret = skx_msr_cpu_bus_read(die_to_cpu(die),
-					   &type->topology[die].configuration);
+		topology[die] = kcalloc(type->num_boxes, sizeof(**topology), GFP_KERNEL);
+		if (!topology[die])
+			goto clear;
+		for (idx = 0; idx < type->num_boxes; idx++) {
+			topology[die][idx].untyped = kcalloc(type->num_boxes,
+							     topology_size[topology_type],
+							     GFP_KERNEL);
+			if (!topology[die][idx].untyped)
+				goto clear;
+		}
+	}
+
+	type->topology = topology;
+
+	return 0;
+clear:
+	for (; die >= 0; die--) {
+		for (idx = 0; idx < type->num_boxes; idx++)
+			kfree(topology[die][idx].untyped);
+		kfree(topology[die]);
+	}
+	kfree(topology);
+err:
+	return -ENOMEM;
+}
+
+static void pmu_free_topology(struct intel_uncore_type *type)
+{
+	int die, idx;
+
+	if (type->topology) {
+		for (die = 0; die < uncore_max_dies(); die++) {
+			for (idx = 0; idx < type->num_boxes; idx++)
+				kfree(type->topology[die][idx].untyped);
+			kfree(type->topology[die]);
+		}
+		kfree(type->topology);
+		type->topology = NULL;
+	}
+}
+
+static int skx_pmu_get_topology(struct intel_uncore_type *type,
+				 int (*topology_cb)(struct intel_uncore_type*, int, int, u64))
+{
+	int die, ret = -EPERM;
+	u64 cpu_bus_msr;
+
+	for (die = 0; die < uncore_max_dies(); die++) {
+		ret = skx_msr_cpu_bus_read(die_to_cpu(die), &cpu_bus_msr);
 		if (ret)
 			break;
 
@@ -3783,15 +3872,33 @@ static int skx_iio_get_topology(struct intel_uncore_type *type)
 		if (ret < 0)
 			break;
 
-		type->topology[die].segment = ret;
+		ret = topology_cb(type, ret, die, cpu_bus_msr);
+		if (ret)
+			break;
 	}
 
-	if (ret < 0) {
-		kfree(type->topology);
-		type->topology = NULL;
+	return ret;
+}
+
+static int skx_iio_topology_cb(struct intel_uncore_type *type, int segment,
+				int die, u64 cpu_bus_msr)
+{
+	int idx;
+	struct intel_uncore_topology *t;
+
+	for (idx = 0; idx < type->num_boxes; idx++) {
+		t = &type->topology[die][idx];
+		t->pmu_idx = idx;
+		t->iio->segment = segment;
+		t->iio->pci_bus_no = (cpu_bus_msr >> (idx * BUS_NUM_STRIDE)) & 0xff;
 	}
 
-	return ret;
+	return 0;
+}
+
+static int skx_iio_get_topology(struct intel_uncore_type *type)
+{
+	return skx_pmu_get_topology(type, skx_iio_topology_cb);
 }
 
 static struct attribute_group skx_iio_mapping_group = {
@@ -3803,8 +3910,25 @@ static const struct attribute_group *skx_iio_attr_update[] = {
 	NULL,
 };
 
-static int
-pmu_iio_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
+static void pmu_clear_mapping_attr(const struct attribute_group **groups,
+				   struct attribute_group *ag)
+{
+	int i;
+
+	for (i = 0; groups[i]; i++) {
+		if (groups[i] == ag) {
+			for (i++; groups[i]; i++)
+				groups[i - 1] = groups[i];
+			groups[i - 1] = NULL;
+			break;
+		}
+	}
+}
+
+static void
+pmu_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag,
+		ssize_t (*show)(struct device*, struct device_attribute*, char*),
+		int topology_type)
 {
 	char buf[64];
 	int ret;
@@ -3812,11 +3936,13 @@ pmu_iio_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
 	struct attribute **attrs = NULL;
 	struct dev_ext_attribute *eas = NULL;
 
-	ret = type->get_topology(type);
+	ret = pmu_alloc_topology(type, topology_type);
 	if (ret < 0)
 		goto clear_attr_update;
 
-	ret = -ENOMEM;
+	ret = type->get_topology(type);
+	if (ret < 0)
+		goto clear_topology;
 
 	/* One more for NULL. */
 	attrs = kcalloc((uncore_max_dies() + 1), sizeof(*attrs), GFP_KERNEL);
@@ -3828,20 +3954,20 @@ pmu_iio_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
 		goto clear_attrs;
 
 	for (die = 0; die < uncore_max_dies(); die++) {
-		sprintf(buf, "die%ld", die);
+		snprintf(buf, sizeof(buf), "die%ld", die);
 		sysfs_attr_init(&eas[die].attr.attr);
 		eas[die].attr.attr.name = kstrdup(buf, GFP_KERNEL);
 		if (!eas[die].attr.attr.name)
 			goto err;
 		eas[die].attr.attr.mode = 0444;
-		eas[die].attr.show = skx_iio_mapping_show;
+		eas[die].attr.show = show;
 		eas[die].attr.store = NULL;
 		eas[die].var = (void *)die;
 		attrs[die] = &eas[die].attr.attr;
 	}
 	ag->attrs = attrs;
 
-	return 0;
+	return;
 err:
 	for (; die >= 0; die--)
 		kfree(eas[die].attr.attr.name);
@@ -3849,14 +3975,13 @@ err:
 clear_attrs:
 	kfree(attrs);
 clear_topology:
-	kfree(type->topology);
+	pmu_free_topology(type);
 clear_attr_update:
-	type->attr_update = NULL;
-	return ret;
+	pmu_clear_mapping_attr(type->attr_update, ag);
 }
 
 static void
-pmu_iio_cleanup_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
+pmu_cleanup_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
 {
 	struct attribute **attr = ag->attrs;
 
@@ -3868,17 +3993,23 @@ pmu_iio_cleanup_mapping(struct intel_uncore_type *type, struct attribute_group *
 	kfree(attr_to_ext_attr(*ag->attrs));
 	kfree(ag->attrs);
 	ag->attrs = NULL;
-	kfree(type->topology);
+	pmu_free_topology(type);
+}
+
+static void
+pmu_iio_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
+{
+	pmu_set_mapping(type, ag, skx_iio_mapping_show, IIO_TOPOLOGY_TYPE);
 }
 
-static int skx_iio_set_mapping(struct intel_uncore_type *type)
+static void skx_iio_set_mapping(struct intel_uncore_type *type)
 {
-	return pmu_iio_set_mapping(type, &skx_iio_mapping_group);
+	pmu_iio_set_mapping(type, &skx_iio_mapping_group);
 }
 
 static void skx_iio_cleanup_mapping(struct intel_uncore_type *type)
 {
-	pmu_iio_cleanup_mapping(type, &skx_iio_mapping_group);
+	pmu_cleanup_mapping(type, &skx_iio_mapping_group);
 }
 
 static struct intel_uncore_type skx_uncore_iio = {
@@ -4139,6 +4270,132 @@ static struct intel_uncore_ops skx_upi_uncore_pci_ops = {
 	.read_counter	= snbep_uncore_pci_read_counter,
 };
 
+static umode_t
+skx_upi_mapping_visible(struct kobject *kobj, struct attribute *attr, int die)
+{
+	struct intel_uncore_pmu *pmu = dev_to_uncore_pmu(kobj_to_dev(kobj));
+
+	return pmu->type->topology[die][pmu->pmu_idx].upi->enabled ? attr->mode : 0;
+}
+
+static ssize_t skx_upi_mapping_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct intel_uncore_pmu *pmu = dev_to_uncore_pmu(dev);
+	struct dev_ext_attribute *ea = to_dev_ext_attribute(attr);
+	long die = (long)ea->var;
+	struct uncore_upi_topology *upi = pmu->type->topology[die][pmu->pmu_idx].upi;
+
+	return sysfs_emit(buf, "upi_%d,die_%d\n", upi->pmu_idx_to, upi->die_to);
+}
+
+#define SKX_UPI_REG_DID			0x2058
+#define SKX_UPI_REGS_ADDR_DEVICE_LINK0	0x0e
+#define SKX_UPI_REGS_ADDR_FUNCTION	0x00
+
+/*
+ * UPI Link Parameter 0
+ * |  Bit  |  Default  |  Description
+ * | 19:16 |     0h    | base_nodeid - The NodeID of the sending socket.
+ * | 12:8  |    00h    | sending_port - The processor die port number of the sending port.
+ */
+#define SKX_KTILP0_OFFSET	0x94
+
+/*
+ * UPI Pcode Status. This register is used by PCode to store the link training status.
+ * |  Bit  |  Default  |  Description
+ * |   4   |     0h    | ll_status_valid — Bit indicates the valid training status
+ *                       logged from PCode to the BIOS.
+ */
+#define SKX_KTIPCSTS_OFFSET	0x120
+
+static int upi_fill_topology(struct pci_dev *dev, struct intel_uncore_topology *tp,
+			     int pmu_idx)
+{
+	int ret;
+	u32 upi_conf;
+	struct uncore_upi_topology *upi = tp->upi;
+
+	tp->pmu_idx = pmu_idx;
+	ret = pci_read_config_dword(dev, SKX_KTIPCSTS_OFFSET, &upi_conf);
+	if (ret) {
+		ret = pcibios_err_to_errno(ret);
+		goto err;
+	}
+	upi->enabled = (upi_conf >> 4) & 1;
+	if (upi->enabled) {
+		ret = pci_read_config_dword(dev, SKX_KTILP0_OFFSET,
+					    &upi_conf);
+		if (ret) {
+			ret = pcibios_err_to_errno(ret);
+			goto err;
+		}
+		upi->die_to = (upi_conf >> 16) & 0xf;
+		upi->pmu_idx_to = (upi_conf >> 8) & 0x1f;
+	}
+err:
+	return ret;
+}
+
+static int skx_upi_topology_cb(struct intel_uncore_type *type, int segment,
+				int die, u64 cpu_bus_msr)
+{
+	int idx, ret;
+	struct intel_uncore_topology *upi;
+	unsigned int devfn;
+	struct pci_dev *dev = NULL;
+	u8 bus = cpu_bus_msr >> (3 * BUS_NUM_STRIDE);
+
+	for (idx = 0; idx < type->num_boxes; idx++) {
+		upi = &type->topology[die][idx];
+		devfn = PCI_DEVFN(SKX_UPI_REGS_ADDR_DEVICE_LINK0 + idx,
+				  SKX_UPI_REGS_ADDR_FUNCTION);
+		dev = pci_get_domain_bus_and_slot(segment, bus, devfn);
+		if (dev) {
+			ret = upi_fill_topology(dev, upi, idx);
+			if (ret)
+				break;
+		}
+	}
+
+	pci_dev_put(dev);
+	return ret;
+}
+
+static int skx_upi_get_topology(struct intel_uncore_type *type)
+{
+	/* CPX case is not supported */
+	if (boot_cpu_data.x86_stepping == 11)
+		return -EPERM;
+
+	return skx_pmu_get_topology(type, skx_upi_topology_cb);
+}
+
+static struct attribute_group skx_upi_mapping_group = {
+	.is_visible	= skx_upi_mapping_visible,
+};
+
+static const struct attribute_group *skx_upi_attr_update[] = {
+	&skx_upi_mapping_group,
+	NULL
+};
+
+static void
+pmu_upi_set_mapping(struct intel_uncore_type *type, struct attribute_group *ag)
+{
+	pmu_set_mapping(type, ag, skx_upi_mapping_show, UPI_TOPOLOGY_TYPE);
+}
+
+static void skx_upi_set_mapping(struct intel_uncore_type *type)
+{
+	pmu_upi_set_mapping(type, &skx_upi_mapping_group);
+}
+
+static void skx_upi_cleanup_mapping(struct intel_uncore_type *type)
+{
+	pmu_cleanup_mapping(type, &skx_upi_mapping_group);
+}
+
 static struct intel_uncore_type skx_uncore_upi = {
 	.name		= "upi",
 	.num_counters   = 4,
@@ -4151,6 +4408,10 @@ static struct intel_uncore_type skx_uncore_upi = {
 	.box_ctl	= SKX_UPI_PCI_PMON_BOX_CTL,
 	.ops		= &skx_upi_uncore_pci_ops,
 	.format_group	= &skx_upi_uncore_format_group,
+	.attr_update	= skx_upi_attr_update,
+	.get_topology	= skx_upi_get_topology,
+	.set_mapping	= skx_upi_set_mapping,
+	.cleanup_mapping = skx_upi_cleanup_mapping,
 };
 
 static void skx_m2m_uncore_pci_init_box(struct intel_uncore_box *box)
@@ -4461,11 +4722,6 @@ static int sad_cfg_iio_topology(struct intel_uncore_type *type, u8 *sad_pmon_map
 	int die, stack_id, ret = -EPERM;
 	struct pci_dev *dev = NULL;
 
-	type->topology = kcalloc(uncore_max_dies(), sizeof(*type->topology),
-				 GFP_KERNEL);
-	if (!type->topology)
-		return -ENOMEM;
-
 	while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, SNR_ICX_MESH2IIO_MMAP_DID, dev))) {
 		ret = pci_read_config_dword(dev, SNR_ICX_SAD_CONTROL_CFG, &sad_cfg);
 		if (ret) {
@@ -4483,14 +4739,12 @@ static int sad_cfg_iio_topology(struct intel_uncore_type *type, u8 *sad_pmon_map
 		/* Convert stack id from SAD_CONTROL to PMON notation. */
 		stack_id = sad_pmon_mapping[stack_id];
 
-		((u8 *)&(type->topology[die].configuration))[stack_id] = dev->bus->number;
-		type->topology[die].segment = pci_domain_nr(dev->bus);
+		type->topology[die][stack_id].iio->segment = pci_domain_nr(dev->bus);
+		type->topology[die][stack_id].pmu_idx = stack_id;
+		type->topology[die][stack_id].iio->pci_bus_no = dev->bus->number;
 	}
 
-	if (ret) {
-		kfree(type->topology);
-		type->topology = NULL;
-	}
+	pci_dev_put(dev);
 
 	return ret;
 }
@@ -4519,14 +4773,14 @@ static int snr_iio_get_topology(struct intel_uncore_type *type)
 	return sad_cfg_iio_topology(type, snr_sad_pmon_mapping);
 }
 
-static int snr_iio_set_mapping(struct intel_uncore_type *type)
+static void snr_iio_set_mapping(struct intel_uncore_type *type)
 {
-	return pmu_iio_set_mapping(type, &snr_iio_mapping_group);
+	pmu_iio_set_mapping(type, &snr_iio_mapping_group);
 }
 
 static void snr_iio_cleanup_mapping(struct intel_uncore_type *type)
 {
-	pmu_iio_cleanup_mapping(type, &snr_iio_mapping_group);
+	pmu_cleanup_mapping(type, &snr_iio_mapping_group);
 }
 
 static struct event_constraint snr_uncore_iio_constraints[] = {
@@ -4857,6 +5111,8 @@ static int snr_uncore_mmio_map(struct intel_uncore_box *box,
 
 	addr += box_ctl;
 
+	pci_dev_put(pdev);
+
 	box->io_addr = ioremap(addr, type->mmio_map_size);
 	if (!box->io_addr) {
 		pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
@@ -5137,14 +5393,19 @@ static int icx_iio_get_topology(struct intel_uncore_type *type)
 	return sad_cfg_iio_topology(type, icx_sad_pmon_mapping);
 }
 
-static int icx_iio_set_mapping(struct intel_uncore_type *type)
+static void icx_iio_set_mapping(struct intel_uncore_type *type)
 {
-	return pmu_iio_set_mapping(type, &icx_iio_mapping_group);
+	/* Detect ICX-D system. This case is not supported */
+	if (boot_cpu_data.x86_model == INTEL_FAM6_ICELAKE_D) {
+		pmu_clear_mapping_attr(type->attr_update, &icx_iio_mapping_group);
+		return;
+	}
+	pmu_iio_set_mapping(type, &icx_iio_mapping_group);
 }
 
 static void icx_iio_cleanup_mapping(struct intel_uncore_type *type)
 {
-	pmu_iio_cleanup_mapping(type, &icx_iio_mapping_group);
+	pmu_cleanup_mapping(type, &icx_iio_mapping_group);
 }
 
 static struct intel_uncore_type icx_uncore_iio = {
@@ -5337,6 +5598,76 @@ static const struct attribute_group icx_upi_uncore_format_group = {
 	.attrs = icx_upi_uncore_formats_attr,
 };
 
+#define ICX_UPI_REGS_ADDR_DEVICE_LINK0	0x02
+#define ICX_UPI_REGS_ADDR_FUNCTION	0x01
+
+static int discover_upi_topology(struct intel_uncore_type *type, int ubox_did, int dev_link0)
+{
+	struct pci_dev *ubox = NULL;
+	struct pci_dev *dev = NULL;
+	u32 nid, gid;
+	int i, idx, ret = -EPERM;
+	struct intel_uncore_topology *upi;
+	unsigned int devfn;
+
+	/* GIDNIDMAP method supports machines which have less than 8 sockets. */
+	if (uncore_max_dies() > 8)
+		goto err;
+
+	while ((ubox = pci_get_device(PCI_VENDOR_ID_INTEL, ubox_did, ubox))) {
+		ret = upi_nodeid_groupid(ubox, SKX_CPUNODEID, SKX_GIDNIDMAP, &nid, &gid);
+		if (ret) {
+			ret = pcibios_err_to_errno(ret);
+			break;
+		}
+
+		for (i = 0; i < 8; i++) {
+			if (nid != GIDNIDMAP(gid, i))
+				continue;
+			for (idx = 0; idx < type->num_boxes; idx++) {
+				upi = &type->topology[nid][idx];
+				devfn = PCI_DEVFN(dev_link0 + idx, ICX_UPI_REGS_ADDR_FUNCTION);
+				dev = pci_get_domain_bus_and_slot(pci_domain_nr(ubox->bus),
+								  ubox->bus->number,
+								  devfn);
+				if (dev) {
+					ret = upi_fill_topology(dev, upi, idx);
+					if (ret)
+						goto err;
+				}
+			}
+		}
+	}
+err:
+	pci_dev_put(ubox);
+	pci_dev_put(dev);
+	return ret;
+}
+
+static int icx_upi_get_topology(struct intel_uncore_type *type)
+{
+	return discover_upi_topology(type, ICX_UBOX_DID, ICX_UPI_REGS_ADDR_DEVICE_LINK0);
+}
+
+static struct attribute_group icx_upi_mapping_group = {
+	.is_visible	= skx_upi_mapping_visible,
+};
+
+static const struct attribute_group *icx_upi_attr_update[] = {
+	&icx_upi_mapping_group,
+	NULL
+};
+
+static void icx_upi_set_mapping(struct intel_uncore_type *type)
+{
+	pmu_upi_set_mapping(type, &icx_upi_mapping_group);
+}
+
+static void icx_upi_cleanup_mapping(struct intel_uncore_type *type)
+{
+	pmu_cleanup_mapping(type, &icx_upi_mapping_group);
+}
+
 static struct intel_uncore_type icx_uncore_upi = {
 	.name		= "upi",
 	.num_counters   = 4,
@@ -5349,6 +5680,10 @@ static struct intel_uncore_type icx_uncore_upi = {
 	.box_ctl	= ICX_UPI_PCI_PMON_BOX_CTL,
 	.ops		= &skx_upi_uncore_pci_ops,
 	.format_group	= &icx_upi_uncore_format_group,
+	.attr_update	= icx_upi_attr_update,
+	.get_topology	= icx_upi_get_topology,
+	.set_mapping	= icx_upi_set_mapping,
+	.cleanup_mapping = icx_upi_cleanup_mapping,
 };
 
 static struct event_constraint icx_uncore_m3upi_constraints[] = {
@@ -5780,9 +6115,43 @@ static struct intel_uncore_type spr_uncore_m2m = {
 	.name			= "m2m",
 };
 
+static struct attribute_group spr_upi_mapping_group = {
+	.is_visible	= skx_upi_mapping_visible,
+};
+
+static const struct attribute_group *spr_upi_attr_update[] = {
+	&uncore_alias_group,
+	&spr_upi_mapping_group,
+	NULL
+};
+
+#define SPR_UPI_REGS_ADDR_DEVICE_LINK0	0x01
+
+static void spr_upi_set_mapping(struct intel_uncore_type *type)
+{
+	pmu_upi_set_mapping(type, &spr_upi_mapping_group);
+}
+
+static void spr_upi_cleanup_mapping(struct intel_uncore_type *type)
+{
+	pmu_cleanup_mapping(type, &spr_upi_mapping_group);
+}
+
+static int spr_upi_get_topology(struct intel_uncore_type *type)
+{
+	return discover_upi_topology(type, SPR_UBOX_DID, SPR_UPI_REGS_ADDR_DEVICE_LINK0);
+}
+
 static struct intel_uncore_type spr_uncore_upi = {
-	SPR_UNCORE_PCI_COMMON_FORMAT(),
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.event_mask_ext		= SPR_RAW_EVENT_MASK_EXT,
+	.format_group		= &spr_uncore_raw_format_group,
+	.ops			= &spr_uncore_pci_ops,
 	.name			= "upi",
+	.attr_update		= spr_upi_attr_update,
+	.get_topology		= spr_upi_get_topology,
+	.set_mapping		= spr_upi_set_mapping,
+	.cleanup_mapping	= spr_upi_cleanup_mapping,
 };
 
 static struct intel_uncore_type spr_uncore_m3upi = {
@@ -5986,6 +6355,12 @@ static void uncore_type_customized_copy(struct intel_uncore_type *to_type,
 		to_type->format_group = from_type->format_group;
 	if (from_type->attr_update)
 		to_type->attr_update = from_type->attr_update;
+	if (from_type->set_mapping)
+		to_type->set_mapping = from_type->set_mapping;
+	if (from_type->get_topology)
+		to_type->get_topology = from_type->get_topology;
+	if (from_type->cleanup_mapping)
+		to_type->cleanup_mapping = from_type->cleanup_mapping;
 }
 
 static struct intel_uncore_type **
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 332d2e6d8ae4..0e849f28a5c1 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -811,7 +811,7 @@ struct x86_pmu {
 	void		(*cpu_dead)(int cpu);
 
 	void		(*check_microcode)(void);
-	void		(*sched_task)(struct perf_event_context *ctx,
+	void		(*sched_task)(struct perf_event_pmu_context *pmu_ctx,
 				      bool sched_in);
 
 	/*
@@ -894,12 +894,12 @@ struct x86_pmu {
 	int		num_topdown_events;
 
 	/*
-	 * perf task context (i.e. struct perf_event_context::task_ctx_data)
+	 * perf task context (i.e. struct perf_event_pmu_context::task_ctx_data)
 	 * switch helper to bridge calls from perf/core to perf/x86.
 	 * See struct pmu::swap_task_ctx() usage for examples;
 	 */
-	void		(*swap_task_ctx)(struct perf_event_context *prev,
-					 struct perf_event_context *next);
+	void		(*swap_task_ctx)(struct perf_event_pmu_context *prev_epc,
+					 struct perf_event_pmu_context *next_epc);
 
 	/*
 	 * AMD bits
@@ -925,7 +925,7 @@ struct x86_pmu {
 
 	int (*aux_output_match) (struct perf_event *event);
 
-	int (*filter_match)(struct perf_event *event);
+	void (*filter)(struct pmu *pmu, int cpu, bool *ret);
 	/*
 	 * Hybrid support
 	 *
@@ -1180,8 +1180,6 @@ int x86_pmu_handle_irq(struct pt_regs *regs);
 void x86_pmu_show_pmu_cap(int num_counters, int num_counters_fixed,
 			  u64 intel_ctrl);
 
-void x86_pmu_update_cpu_context(struct pmu *pmu, int cpu);
-
 extern struct event_constraint emptyconstraint;
 
 extern struct event_constraint unconstrained;
@@ -1306,7 +1304,7 @@ void amd_pmu_lbr_reset(void);
 void amd_pmu_lbr_read(void);
 void amd_pmu_lbr_add(struct perf_event *event);
 void amd_pmu_lbr_del(struct perf_event *event);
-void amd_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in);
+void amd_pmu_lbr_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in);
 void amd_pmu_lbr_enable_all(void);
 void amd_pmu_lbr_disable_all(void);
 int amd_pmu_lbr_hw_config(struct perf_event *event);
@@ -1322,7 +1320,6 @@ void amd_brs_enable_all(void);
 void amd_brs_disable_all(void);
 void amd_brs_drain(void);
 void amd_brs_lopwr_init(void);
-void amd_brs_disable_all(void);
 int amd_brs_hw_config(struct perf_event *event);
 void amd_brs_reset(void);
 
@@ -1330,7 +1327,7 @@ static inline void amd_pmu_brs_add(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
-	perf_sched_cb_inc(event->ctx->pmu);
+	perf_sched_cb_inc(event->pmu);
 	cpuc->lbr_users++;
 	/*
 	 * No need to reset BRS because it is reset
@@ -1345,10 +1342,10 @@ static inline void amd_pmu_brs_del(struct perf_event *event)
 	cpuc->lbr_users--;
 	WARN_ON_ONCE(cpuc->lbr_users < 0);
 
-	perf_sched_cb_dec(event->ctx->pmu);
+	perf_sched_cb_dec(event->pmu);
 }
 
-void amd_pmu_brs_sched_task(struct perf_event_context *ctx, bool sched_in);
+void amd_pmu_brs_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in);
 #else
 static inline int amd_brs_init(void)
 {
@@ -1373,7 +1370,7 @@ static inline void amd_pmu_brs_del(struct perf_event *event)
 {
 }
 
-static inline void amd_pmu_brs_sched_task(struct perf_event_context *ctx, bool sched_in)
+static inline void amd_pmu_brs_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in)
 {
 }
 
@@ -1533,7 +1530,7 @@ void intel_pmu_pebs_enable_all(void);
 
 void intel_pmu_pebs_disable_all(void);
 
-void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in);
+void intel_pmu_pebs_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in);
 
 void intel_pmu_auto_reload_read(struct perf_event *event);
 
@@ -1541,10 +1538,10 @@ void intel_pmu_store_pebs_lbrs(struct lbr_entry *lbr);
 
 void intel_ds_init(void);
 
-void intel_pmu_lbr_swap_task_ctx(struct perf_event_context *prev,
-				 struct perf_event_context *next);
+void intel_pmu_lbr_swap_task_ctx(struct perf_event_pmu_context *prev_epc,
+				 struct perf_event_pmu_context *next_epc);
 
-void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in);
+void intel_pmu_lbr_sched_task(struct perf_event_pmu_context *pmu_ctx, bool sched_in);
 
 u64 lbr_from_signext_quirk_wr(u64 val);
 
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index f49bc3ec76e6..41ef036ebb7b 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -77,7 +77,7 @@ static int hyperv_init_ghcb(void)
 static int hv_cpu_init(unsigned int cpu)
 {
 	union hv_vp_assist_msr_contents msr = { 0 };
-	struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id()];
+	struct hv_vp_assist_page **hvp = &hv_vp_assist_page[cpu];
 	int ret;
 
 	ret = hv_common_cpu_init(cpu);
@@ -87,34 +87,32 @@ static int hv_cpu_init(unsigned int cpu)
 	if (!hv_vp_assist_page)
 		return 0;
 
-	if (!*hvp) {
-		if (hv_root_partition) {
-			/*
-			 * For root partition we get the hypervisor provided VP assist
-			 * page, instead of allocating a new page.
-			 */
-			rdmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
-			*hvp = memremap(msr.pfn <<
-					HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT,
-					PAGE_SIZE, MEMREMAP_WB);
-		} else {
-			/*
-			 * The VP assist page is an "overlay" page (see Hyper-V TLFS's
-			 * Section 5.2.1 "GPA Overlay Pages"). Here it must be zeroed
-			 * out to make sure we always write the EOI MSR in
-			 * hv_apic_eoi_write() *after* the EOI optimization is disabled
-			 * in hv_cpu_die(), otherwise a CPU may not be stopped in the
-			 * case of CPU offlining and the VM will hang.
-			 */
+	if (hv_root_partition) {
+		/*
+		 * For root partition we get the hypervisor provided VP assist
+		 * page, instead of allocating a new page.
+		 */
+		rdmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
+		*hvp = memremap(msr.pfn << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT,
+				PAGE_SIZE, MEMREMAP_WB);
+	} else {
+		/*
+		 * The VP assist page is an "overlay" page (see Hyper-V TLFS's
+		 * Section 5.2.1 "GPA Overlay Pages"). Here it must be zeroed
+		 * out to make sure we always write the EOI MSR in
+		 * hv_apic_eoi_write() *after* the EOI optimization is disabled
+		 * in hv_cpu_die(), otherwise a CPU may not be stopped in the
+		 * case of CPU offlining and the VM will hang.
+		 */
+		if (!*hvp)
 			*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO);
-			if (*hvp)
-				msr.pfn = vmalloc_to_pfn(*hvp);
-		}
-		WARN_ON(!(*hvp));
-		if (*hvp) {
-			msr.enable = 1;
-			wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
-		}
+		if (*hvp)
+			msr.pfn = vmalloc_to_pfn(*hvp);
+
+	}
+	if (!WARN_ON(!(*hvp))) {
+		msr.enable = 1;
+		wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, msr.as_uint64);
 	}
 
 	return hyperv_init_ghcb();
@@ -464,6 +462,8 @@ void __init hyperv_init(void)
 		BUG_ON(!src);
 		memcpy_to_page(pg, 0, src, HV_HYP_PAGE_SIZE);
 		memunmap(src);
+
+		hv_remap_tsc_clocksource();
 	} else {
 		hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
 		wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
@@ -537,8 +537,6 @@ void hyperv_cleanup(void)
 	union hv_x64_msr_hypercall_contents hypercall_msr;
 	union hv_reference_tsc_msr tsc_msr;
 
-	unregister_syscore_ops(&hv_syscore_ops);
-
 	/* Reset our OS id */
 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
 	hv_ghcb_msr_write(HV_X64_MSR_GUEST_OS_ID, 0);
diff --git a/arch/x86/ia32/Makefile b/arch/x86/ia32/Makefile
index e481056698de..333556a86b2a 100644
--- a/arch/x86/ia32/Makefile
+++ b/arch/x86/ia32/Makefile
@@ -3,7 +3,5 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32_signal.o
-
 audit-class-$(CONFIG_AUDIT) := audit.o
 obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 3415321c8240..3216da7074ba 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -249,7 +249,6 @@ static inline u64 native_x2apic_icr_read(void)
 extern int x2apic_mode;
 extern int x2apic_phys;
 extern void __init x2apic_set_max_apicid(u32 apicid);
-extern void __init check_x2apic(void);
 extern void x2apic_setup(void);
 static inline int x2apic_enabled(void)
 {
@@ -258,13 +257,13 @@ static inline int x2apic_enabled(void)
 
 #define x2apic_supported()	(boot_cpu_has(X86_FEATURE_X2APIC))
 #else /* !CONFIG_X86_X2APIC */
-static inline void check_x2apic(void) { }
 static inline void x2apic_setup(void) { }
 static inline int x2apic_enabled(void) { return 0; }
 
 #define x2apic_mode		(0)
 #define	x2apic_supported()	(0)
 #endif /* !CONFIG_X86_X2APIC */
+extern void __init check_x2apic(void);
 
 struct irq_data;
 
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index b71f4f2ecdd5..c9f4730bb113 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -304,6 +304,10 @@
 #define X86_FEATURE_UNRET		(11*32+15) /* "" AMD BTB untrain return */
 #define X86_FEATURE_USE_IBPB_FW		(11*32+16) /* "" Use IBPB during runtime firmware calls */
 #define X86_FEATURE_RSB_VMEXIT_LITE	(11*32+17) /* "" Fill RSB on VM exit when EIBRS is enabled */
+#define X86_FEATURE_SGX_EDECCSSA	(11*32+18) /* "" SGX EDECCSSA user leaf function */
+
+
+#define X86_FEATURE_MSR_TSX_CTRL	(11*32+20) /* "" MSR IA32_TSX_CTRL (Intel) implemented */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX_VNNI		(12*32+ 4) /* AVX VNNI instructions */
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index cb0ff1055ab1..be8b58da63b9 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -152,10 +152,6 @@ do {						\
 	(elf_check_arch_ia32(x) ||					\
 	 (IS_ENABLED(CONFIG_X86_X32_ABI) && (x)->e_machine == EM_X86_64))
 
-#if __USER32_DS != __USER_DS
-# error "The following code assumes __USER32_DS == __USER_DS"
-#endif
-
 static inline void elf_common_init(struct thread_struct *t,
 				   struct pt_regs *regs, const u16 ds)
 {
diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h
index e1c9df9102a5..611fa41711af 100644
--- a/arch/x86/include/asm/fpu/signal.h
+++ b/arch/x86/include/asm/fpu/signal.h
@@ -13,16 +13,9 @@
 #ifdef CONFIG_X86_64
 # include <uapi/asm/sigcontext.h>
 # include <asm/user32.h>
-struct ksignal;
-int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
-			compat_sigset_t *set, struct pt_regs *regs);
-int ia32_setup_frame(int sig, struct ksignal *ksig,
-		     compat_sigset_t *set, struct pt_regs *regs);
 #else
 # define user_i387_ia32_struct	user_i387_struct
 # define user32_fxsr_struct	user_fxsr_struct
-# define ia32_setup_frame	__setup_frame
-# define ia32_setup_rt_frame	__setup_rt_frame
 #endif
 
 extern void convert_from_fxsr(struct user_i387_ia32_struct *env,
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 908d99b127d3..5061ac98ffa1 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -34,19 +34,6 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 	return addr;
 }
 
-/*
- * When a ftrace registered caller is tracing a function that is
- * also set by a register_ftrace_direct() call, it needs to be
- * differentiated in the ftrace_caller trampoline. To do this, we
- * place the direct caller in the ORIG_AX part of pt_regs. This
- * tells the ftrace_caller that there's a direct caller.
- */
-static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
-{
-	/* Emulate a call */
-	regs->orig_ax = addr;
-}
-
 #ifdef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
 struct ftrace_regs {
 	struct pt_regs		regs;
@@ -61,9 +48,25 @@ arch_ftrace_get_regs(struct ftrace_regs *fregs)
 	return &fregs->regs;
 }
 
-#define ftrace_instruction_pointer_set(fregs, _ip)	\
+#define ftrace_regs_set_instruction_pointer(fregs, _ip)	\
 	do { (fregs)->regs.ip = (_ip); } while (0)
 
+#define ftrace_regs_get_instruction_pointer(fregs) \
+	((fregs)->regs.ip)
+
+#define ftrace_regs_get_argument(fregs, n) \
+	regs_get_kernel_argument(&(fregs)->regs, n)
+#define ftrace_regs_get_stack_pointer(fregs) \
+	kernel_stack_pointer(&(fregs)->regs)
+#define ftrace_regs_return_value(fregs) \
+	regs_return_value(&(fregs)->regs)
+#define ftrace_regs_set_return_value(fregs, ret) \
+	regs_set_return_value(&(fregs)->regs, ret)
+#define ftrace_override_function_with_return(fregs) \
+	override_function_with_return(&(fregs)->regs)
+#define ftrace_regs_query_register_offset(name) \
+	regs_query_register_offset(name)
+
 struct ftrace_ops;
 #define ftrace_graph_func ftrace_graph_func
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
@@ -72,6 +75,24 @@ void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 #define FTRACE_GRAPH_TRAMP_ADDR FTRACE_GRAPH_ADDR
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+/*
+ * When a ftrace registered caller is tracing a function that is
+ * also set by a register_ftrace_direct() call, it needs to be
+ * differentiated in the ftrace_caller trampoline. To do this, we
+ * place the direct caller in the ORIG_AX part of pt_regs. This
+ * tells the ftrace_caller that there's a direct caller.
+ */
+static inline void
+__arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
+{
+	/* Emulate a call */
+	regs->orig_ax = addr;
+}
+#define arch_ftrace_set_direct_caller(fregs, addr) \
+	__arch_ftrace_set_direct_caller(&(fregs)->regs, addr)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 struct dyn_arch_ftrace {
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 3089ec352743..6d9368ea3701 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -374,11 +374,20 @@ struct hv_nested_enlightenments_control {
 struct hv_vp_assist_page {
 	__u32 apic_assist;
 	__u32 reserved1;
-	__u64 vtl_control[3];
+	__u32 vtl_entry_reason;
+	__u32 vtl_reserved;
+	__u64 vtl_ret_x64rax;
+	__u64 vtl_ret_x64rcx;
 	struct hv_nested_enlightenments_control nested_control;
 	__u8 enlighten_vmentry;
 	__u8 reserved2[7];
 	__u64 current_nested_vmcs;
+	__u8 synthetic_time_unhalted_timer_expired;
+	__u8 reserved3[7];
+	__u8 virtualization_fault_information[40];
+	__u8 reserved4[8];
+	__u8 intercept_message[256];
+	__u8 vtl_ret_actions[256];
 } __packed;
 
 struct hv_enlightened_vmcs {
diff --git a/arch/x86/include/asm/hyperv_timer.h b/arch/x86/include/asm/hyperv_timer.h
new file mode 100644
index 000000000000..388fa81b8f38
--- /dev/null
+++ b/arch/x86/include/asm/hyperv_timer.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_HYPERV_TIMER_H
+#define _ASM_X86_HYPERV_TIMER_H
+
+#include <asm/msr.h>
+
+#define hv_get_raw_timer() rdtsc_ordered()
+
+#endif
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 7cc49432187f..7a2ed154a5e1 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -44,10 +44,6 @@ extern int irq_remapping_reenable(int);
 extern int irq_remap_enable_fault_handling(void);
 extern void panic_if_irq_remap(const char *msg);
 
-/* Create PCI MSI/MSIx irqdomain, use @parent as the parent irqdomain. */
-extern struct irq_domain *
-arch_create_remap_msi_irq_domain(struct irq_domain *par, const char *n, int id);
-
 /* Get parent irqdomain for interrupt remapping irqdomain */
 static inline struct irq_domain *arch_get_ir_parent_domain(void)
 {
diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h
index 125c23b7bad3..30c325c235c0 100644
--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -7,9 +7,7 @@
 
 #ifdef CONFIG_X86_LOCAL_APIC
 enum {
-	/* Allocate contiguous CPU vectors */
-	X86_IRQ_ALLOC_CONTIGUOUS_VECTORS		= 0x1,
-	X86_IRQ_ALLOC_LEGACY				= 0x2,
+	X86_IRQ_ALLOC_LEGACY				= 0x1,
 };
 
 extern int x86_fwspec_is_ioapic(struct irq_fwspec *fwspec);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 61f0c206bff0..6d502f3efb0f 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -19,8 +19,6 @@ typedef int (*hyperv_fill_flush_list_func)(
 		struct hv_guest_mapping_flush_list *flush,
 		void *data);
 
-#define hv_get_raw_timer() rdtsc_ordered()
-
 void hyperv_vector_handler(struct pt_regs *regs);
 
 #if IS_ENABLED(CONFIG_HYPERV)
diff --git a/arch/x86/include/asm/msi.h b/arch/x86/include/asm/msi.h
index d71c7e8b738d..935c6d470341 100644
--- a/arch/x86/include/asm/msi.h
+++ b/arch/x86/include/asm/msi.h
@@ -62,4 +62,10 @@ typedef struct x86_msi_addr_hi {
 struct msi_msg;
 u32 x86_msi_msg_get_destid(struct msi_msg *msg, bool extid);
 
+#define X86_VECTOR_MSI_FLAGS_SUPPORTED					\
+	(MSI_GENERIC_FLAGS_MASK | MSI_FLAG_PCI_MSIX | MSI_FLAG_PCI_MSIX_ALLOC_DYN)
+
+#define X86_VECTOR_MSI_FLAGS_REQUIRED					\
+	(MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS)
+
 #endif /* _ASM_X86_MSI_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 10ac52705892..6bcd5d2dd718 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -4,12 +4,7 @@
 
 #include <linux/bits.h>
 
-/*
- * CPU model specific register (MSR) numbers.
- *
- * Do not add new entries to this file unless the definitions are shared
- * between multiple compilation units.
- */
+/* CPU model specific register (MSR) numbers. */
 
 /* x86-64 specific MSRs */
 #define MSR_EFER		0xc0000080 /* extended feature register */
@@ -535,6 +530,11 @@
 #define MSR_AMD64_CPUID_FN_1		0xc0011004
 #define MSR_AMD64_LS_CFG		0xc0011020
 #define MSR_AMD64_DC_CFG		0xc0011022
+
+#define MSR_AMD64_DE_CFG		0xc0011029
+#define MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT	 1
+#define MSR_AMD64_DE_CFG_LFENCE_SERIALIZE	BIT_ULL(MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT)
+
 #define MSR_AMD64_BU_CFG2		0xc001102a
 #define MSR_AMD64_IBSFETCHCTL		0xc0011030
 #define MSR_AMD64_IBSFETCHLINAD		0xc0011031
@@ -640,9 +640,6 @@
 #define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
 #define FAM10H_MMIO_CONF_BASE_SHIFT	20
 #define MSR_FAM10H_NODE_ID		0xc001100c
-#define MSR_F10H_DECFG			0xc0011029
-#define MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT	1
-#define MSR_F10H_DECFG_LFENCE_SERIALIZE		BIT_ULL(MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT)
 
 /* K8 MSRs */
 #define MSR_K8_TOP_MEM1			0xc001001a
@@ -1050,6 +1047,20 @@
 #define VMX_BASIC_MEM_TYPE_WB	6LLU
 #define VMX_BASIC_INOUT		0x0040000000000000LLU
 
+/* Resctrl MSRs: */
+/* - Intel: */
+#define MSR_IA32_L3_QOS_CFG		0xc81
+#define MSR_IA32_L2_QOS_CFG		0xc82
+#define MSR_IA32_QM_EVTSEL		0xc8d
+#define MSR_IA32_QM_CTR			0xc8e
+#define MSR_IA32_PQR_ASSOC		0xc8f
+#define MSR_IA32_L3_CBM_BASE		0xc90
+#define MSR_IA32_L2_CBM_BASE		0xd10
+#define MSR_IA32_MBA_THRTL_BASE		0xd50
+
+/* - AMD: */
+#define MSR_IA32_MBA_BW_BASE		0xc0000200
+
 /* MSR_IA32_VMX_MISC bits */
 #define MSR_IA32_VMX_MISC_INTEL_PT                 (1ULL << 14)
 #define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index c936ce9f0c47..dfdb103ae4f6 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -321,7 +321,7 @@ static inline void indirect_branch_prediction_barrier(void)
 /* The Intel SPEC CTRL MSR base value cache */
 extern u64 x86_spec_ctrl_base;
 DECLARE_PER_CPU(u64, x86_spec_ctrl_current);
-extern void write_spec_ctrl_current(u64 val, bool force);
+extern void update_spec_ctrl_cond(u64 val);
 extern u64 spec_ctrl_current(void);
 
 /*
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 736793d65bcb..b40c462b4af3 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -21,7 +21,7 @@ struct pci_sysdata {
 #ifdef CONFIG_X86_64
 	void		*iommu;		/* IOMMU private data */
 #endif
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 	void		*fwnode;	/* IRQ domain for MSI assignment */
 #endif
 #if IS_ENABLED(CONFIG_VMD)
@@ -52,7 +52,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif
 
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
 {
 	return to_pci_sysdata(bus)->fwnode;
@@ -92,6 +92,7 @@ void pcibios_scan_root(int bus);
 struct irq_routing_table *pcibios_get_irq_routing_table(void);
 int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
 
+bool pci_dev_has_default_msi_parent_domain(struct pci_dev *dev);
 
 #define HAVE_PCI_MMAP
 #define arch_can_pci_mmap_wc()	pat_enabled()
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 5059799bebe3..286a71810f9e 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -139,6 +139,7 @@ static inline int pmd_dirty(pmd_t pmd)
 	return pmd_flags(pmd) & _PAGE_DIRTY;
 }
 
+#define pmd_young pmd_young
 static inline int pmd_young(pmd_t pmd)
 {
 	return pmd_flags(pmd) & _PAGE_ACCESSED;
@@ -1438,6 +1439,14 @@ static inline bool arch_has_hw_pte_young(void)
 	return true;
 }
 
+#ifdef CONFIG_XEN_PV
+#define arch_has_hw_nonleaf_pmd_young arch_has_hw_nonleaf_pmd_young
+static inline bool arch_has_hw_nonleaf_pmd_young(void)
+{
+	return !cpu_feature_enabled(X86_FEATURE_XENPV);
+}
+#endif
+
 #ifdef CONFIG_PAGE_TABLE_CHECK
 static inline bool pte_user_accessible_page(pte_t pte)
 {
diff --git a/arch/x86/include/asm/qspinlock_paravirt.h b/arch/x86/include/asm/qspinlock_paravirt.h
index 60ece592b220..dbb38a6b4dfb 100644
--- a/arch/x86/include/asm/qspinlock_paravirt.h
+++ b/arch/x86/include/asm/qspinlock_paravirt.h
@@ -37,7 +37,7 @@ __PV_CALLEE_SAVE_REGS_THUNK(__pv_queued_spin_unlock_slowpath, ".spinlock.text");
  *   rsi = lockval           (second argument)
  *   rdx = internal variable (set to 0)
  */
-asm    (".pushsection .spinlock.text;"
+asm    (".pushsection .spinlock.text, \"ax\";"
 	".globl " PV_UNLOCK ";"
 	".type " PV_UNLOCK ", @function;"
 	".align 4,0x90;"
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index d24b04ebf950..52788f79786f 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -7,8 +7,6 @@
 #include <linux/sched.h>
 #include <linux/jump_label.h>
 
-#define IA32_PQR_ASSOC	0x0c8f
-
 /**
  * struct resctrl_pqr_state - State cache for the PQR MSR
  * @cur_rmid:		The cached Resource Monitoring ID
@@ -16,8 +14,8 @@
  * @default_rmid:	The user assigned Resource Monitoring ID
  * @default_closid:	The user assigned cached Class Of Service ID
  *
- * The upper 32 bits of IA32_PQR_ASSOC contain closid and the
- * lower 10 bits rmid. The update to IA32_PQR_ASSOC always
+ * The upper 32 bits of MSR_IA32_PQR_ASSOC contain closid and the
+ * lower 10 bits rmid. The update to MSR_IA32_PQR_ASSOC always
  * contains both parts, so we need to cache them. This also
  * stores the user configured per cpu CLOSID and RMID.
  *
@@ -77,7 +75,7 @@ static void __resctrl_sched_in(void)
 	if (closid != state->cur_closid || rmid != state->cur_rmid) {
 		state->cur_closid = closid;
 		state->cur_rmid = rmid;
-		wrmsr(IA32_PQR_ASSOC, rmid, closid);
+		wrmsr(MSR_IA32_PQR_ASSOC, rmid, closid);
 	}
 }
 
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 2e7890dd58a4..c390a672d560 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -135,6 +135,7 @@
 #define __KERNEL_DS			(GDT_ENTRY_KERNEL_DS*8)
 #define __USER_DS			(GDT_ENTRY_DEFAULT_USER_DS*8 + 3)
 #define __USER_CS			(GDT_ENTRY_DEFAULT_USER_CS*8 + 3)
+#define __USER32_CS			__USER_CS
 #define __ESPFIX_SS			(GDT_ENTRY_ESPFIX_SS*8)
 
 /* segment for calling fn: */
@@ -210,7 +211,6 @@
 #define __KERNEL_DS			(GDT_ENTRY_KERNEL_DS*8)
 #define __USER32_CS			(GDT_ENTRY_DEFAULT_USER32_CS*8 + 3)
 #define __USER_DS			(GDT_ENTRY_DEFAULT_USER_DS*8 + 3)
-#define __USER32_DS			__USER_DS
 #define __USER_CS			(GDT_ENTRY_DEFAULT_USER_CS*8 + 3)
 #define __CPUNODE_SEG			(GDT_ENTRY_CPUNODE*8 + 3)
 
diff --git a/arch/x86/include/asm/sgx.h b/arch/x86/include/asm/sgx.h
index eae20fa52b93..6a0069761508 100644
--- a/arch/x86/include/asm/sgx.h
+++ b/arch/x86/include/asm/sgx.h
@@ -115,17 +115,36 @@ enum sgx_miscselect {
  * %SGX_ATTR_EINITTOKENKEY:	Allow to use token signing key that is used to
  *				sign cryptographic tokens that can be passed to
  *				EINIT as an authorization to run an enclave.
+ * %SGX_ATTR_ASYNC_EXIT_NOTIFY:	Allow enclaves to be notified after an
+ *				asynchronous exit has occurred.
  */
 enum sgx_attribute {
-	SGX_ATTR_INIT		= BIT(0),
-	SGX_ATTR_DEBUG		= BIT(1),
-	SGX_ATTR_MODE64BIT	= BIT(2),
-	SGX_ATTR_PROVISIONKEY	= BIT(4),
-	SGX_ATTR_EINITTOKENKEY	= BIT(5),
-	SGX_ATTR_KSS		= BIT(7),
+	SGX_ATTR_INIT		   = BIT(0),
+	SGX_ATTR_DEBUG		   = BIT(1),
+	SGX_ATTR_MODE64BIT	   = BIT(2),
+				  /* BIT(3) is reserved */
+	SGX_ATTR_PROVISIONKEY	   = BIT(4),
+	SGX_ATTR_EINITTOKENKEY	   = BIT(5),
+				  /* BIT(6) is for CET */
+	SGX_ATTR_KSS		   = BIT(7),
+				  /* BIT(8) is reserved */
+				  /* BIT(9) is reserved */
+	SGX_ATTR_ASYNC_EXIT_NOTIFY = BIT(10),
 };
 
-#define SGX_ATTR_RESERVED_MASK	(BIT_ULL(3) | BIT_ULL(6) | GENMASK_ULL(63, 8))
+#define SGX_ATTR_RESERVED_MASK	(BIT_ULL(3) | \
+				 BIT_ULL(6) | \
+				 BIT_ULL(8) | \
+				 BIT_ULL(9) | \
+				 GENMASK_ULL(63, 11))
+
+#define SGX_ATTR_UNPRIV_MASK	(SGX_ATTR_DEBUG	    | \
+				 SGX_ATTR_MODE64BIT | \
+				 SGX_ATTR_KSS	    | \
+				 SGX_ATTR_ASYNC_EXIT_NOTIFY)
+
+#define SGX_ATTR_PRIV_MASK	(SGX_ATTR_PROVISIONKEY	| \
+				 SGX_ATTR_EINITTOKENKEY)
 
 /**
  * struct sgx_secs - SGX Enclave Control Structure (SECS)
diff --git a/arch/x86/include/asm/sighandling.h b/arch/x86/include/asm/sighandling.h
index 65e667279e0f..e770c4fc47f4 100644
--- a/arch/x86/include/asm/sighandling.h
+++ b/arch/x86/include/asm/sighandling.h
@@ -15,4 +15,13 @@
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
+void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size,
+	     void __user **fpstate);
+
+int ia32_setup_frame(struct ksignal *ksig, struct pt_regs *regs);
+int ia32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs);
+int x64_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs);
+int x32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs);
+
 #endif /* _ASM_X86_SIGHANDLING_H */
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index 2dfb5fea13af..4a4043ca6493 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -28,11 +28,6 @@ typedef struct {
 #define SA_IA32_ABI	0x02000000u
 #define SA_X32_ABI	0x01000000u
 
-#ifndef CONFIG_COMPAT
-#define compat_sigset_t compat_sigset_t
-typedef sigset_t compat_sigset_t;
-#endif
-
 #endif /* __ASSEMBLY__ */
 #include <uapi/asm/signal.h>
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
index 020c81a7c729..28d889c9aa16 100644
--- a/arch/x86/include/asm/tdx.h
+++ b/arch/x86/include/asm/tdx.h
@@ -67,6 +67,8 @@ void tdx_safe_halt(void);
 
 bool tdx_early_handle_ve(struct pt_regs *regs);
 
+int tdx_mcall_get_report0(u8 *reportdata, u8 *tdreport);
+
 #else
 
 static inline void tdx_early_init(void) { };
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index f901658d9f7c..cceaafdd2d84 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -44,7 +44,7 @@ obj-y			+= head_$(BITS).o
 obj-y			+= head$(BITS).o
 obj-y			+= ebda.o
 obj-y			+= platform-quirks.o
-obj-y			+= process_$(BITS).o signal.o
+obj-y			+= process_$(BITS).o signal.o signal_$(BITS).o
 obj-$(CONFIG_COMPAT)	+= signal_compat.o
 obj-y			+= traps.o idt.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o dumpstack.o nmi.o
@@ -54,7 +54,7 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 obj-$(CONFIG_IRQ_WORK)  += irq_work.o
 obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= sys_ia32.o
-obj-$(CONFIG_IA32_EMULATION)	+= sys_ia32.o
+obj-$(CONFIG_IA32_EMULATION)	+= sys_ia32.o signal_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o
 obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 5cadcea035e0..a9bea860e22a 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -624,7 +624,7 @@ void __init_or_module noinline apply_ibt_endbr(s32 *start, s32 *end)
 
 #else
 
-void __init_or_module noinline apply_ibt_endbr(s32 *start, s32 *end) { }
+void __init_or_module apply_ibt_endbr(s32 *start, s32 *end) { }
 
 #endif /* CONFIG_X86_KERNEL_IBT */
 
@@ -1608,7 +1608,7 @@ static void text_poke_loc_init(struct text_poke_loc *tp, void *addr,
 
 	default:
 		BUG_ON(len != insn.length);
-	};
+	}
 
 
 	switch (tp->opcode) {
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c6876d3ea4b1..20d9a604da7c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1931,16 +1931,19 @@ void __init check_x2apic(void)
 	}
 }
 #else /* CONFIG_X86_X2APIC */
-static int __init validate_x2apic(void)
+void __init check_x2apic(void)
 {
 	if (!apic_is_x2apic_enabled())
-		return 0;
+		return;
 	/*
-	 * Checkme: Can we simply turn off x2apic here instead of panic?
+	 * Checkme: Can we simply turn off x2APIC here instead of disabling the APIC?
 	 */
-	panic("BIOS has enabled x2apic but kernel doesn't support x2apic, please disable x2apic in BIOS.\n");
+	pr_err("Kernel does not support x2APIC, please recompile with CONFIG_X86_X2APIC.\n");
+	pr_err("Disabling APIC, expect reduced performance and functionality.\n");
+
+	disable_apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 }
-early_initcall(validate_x2apic);
 
 static inline void try_to_enable_x2apic(int remap_mode) { }
 static inline void __x2apic_enable(void) { }
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index 7517eb05bdc1..35d5b8fb18ef 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -142,70 +142,139 @@ msi_set_affinity(struct irq_data *irqd, const struct cpumask *mask, bool force)
 	return ret;
 }
 
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
+/**
+ * pci_dev_has_default_msi_parent_domain - Check whether the device has the default
+ *					   MSI parent domain associated
+ * @dev:	Pointer to the PCI device
  */
-static struct irq_chip pci_msi_controller = {
-	.name			= "PCI-MSI",
-	.irq_unmask		= pci_msi_unmask_irq,
-	.irq_mask		= pci_msi_mask_irq,
-	.irq_ack		= irq_chip_ack_parent,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
-	.irq_set_affinity	= msi_set_affinity,
-	.flags			= IRQCHIP_SKIP_SET_WAKE |
-				  IRQCHIP_AFFINITY_PRE_STARTUP,
-};
+bool pci_dev_has_default_msi_parent_domain(struct pci_dev *dev)
+{
+	struct irq_domain *domain = dev_get_msi_domain(&dev->dev);
 
-int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
-		    msi_alloc_info_t *arg)
+	if (!domain)
+		domain = dev_get_msi_domain(&dev->bus->dev);
+	if (!domain)
+		return false;
+
+	return domain == x86_vector_domain;
+}
+
+/**
+ * x86_msi_prepare - Setup of msi_alloc_info_t for allocations
+ * @domain:	The domain for which this setup happens
+ * @dev:	The device for which interrupts are allocated
+ * @nvec:	The number of vectors to allocate
+ * @alloc:	The allocation info structure to initialize
+ *
+ * This function is to be used for all types of MSI domains above the x86
+ * vector domain and any intermediates. It is always invoked from the
+ * top level interrupt domain. The domain specific allocation
+ * functionality is determined via the @domain's bus token which allows to
+ * map the X86 specific allocation type.
+ */
+static int x86_msi_prepare(struct irq_domain *domain, struct device *dev,
+			   int nvec, msi_alloc_info_t *alloc)
 {
-	init_irq_alloc_info(arg, NULL);
-	if (to_pci_dev(dev)->msix_enabled) {
-		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
-	} else {
-		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
-		arg->flags |= X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+	struct msi_domain_info *info = domain->host_data;
+
+	init_irq_alloc_info(alloc, NULL);
+
+	switch (info->bus_token) {
+	case DOMAIN_BUS_PCI_DEVICE_MSI:
+		alloc->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
+		return 0;
+	case DOMAIN_BUS_PCI_DEVICE_MSIX:
+	case DOMAIN_BUS_PCI_DEVICE_IMS:
+		alloc->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
+		return 0;
+	default:
+		return -EINVAL;
 	}
-
-	return 0;
 }
-EXPORT_SYMBOL_GPL(pci_msi_prepare);
 
-static struct msi_domain_ops pci_msi_domain_ops = {
-	.msi_prepare	= pci_msi_prepare,
-};
+/**
+ * x86_init_dev_msi_info - Domain info setup for MSI domains
+ * @dev:		The device for which the domain should be created
+ * @domain:		The (root) domain providing this callback
+ * @real_parent:	The real parent domain of the to initialize domain
+ * @info:		The domain info for the to initialize domain
+ *
+ * This function is to be used for all types of MSI domains above the x86
+ * vector domain and any intermediates. The domain specific functionality
+ * is determined via the @real_parent.
+ */
+static bool x86_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+				  struct irq_domain *real_parent, struct msi_domain_info *info)
+{
+	const struct msi_parent_ops *pops = real_parent->msi_parent_ops;
+
+	/* MSI parent domain specific settings */
+	switch (real_parent->bus_token) {
+	case DOMAIN_BUS_ANY:
+		/* Only the vector domain can have the ANY token */
+		if (WARN_ON_ONCE(domain != real_parent))
+			return false;
+		info->chip->irq_set_affinity = msi_set_affinity;
+		/* See msi_set_affinity() for the gory details */
+		info->flags |= MSI_FLAG_NOMASK_QUIRK;
+		break;
+	case DOMAIN_BUS_DMAR:
+	case DOMAIN_BUS_AMDVI:
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/* Is the target supported? */
+	switch(info->bus_token) {
+	case DOMAIN_BUS_PCI_DEVICE_MSI:
+	case DOMAIN_BUS_PCI_DEVICE_MSIX:
+		break;
+	case DOMAIN_BUS_PCI_DEVICE_IMS:
+		if (!(pops->supported_flags & MSI_FLAG_PCI_IMS))
+			return false;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/*
+	 * Mask out the domain specific MSI feature flags which are not
+	 * supported by the real parent.
+	 */
+	info->flags			&= pops->supported_flags;
+	/* Enforce the required flags */
+	info->flags			|= X86_VECTOR_MSI_FLAGS_REQUIRED;
+
+	/* This is always invoked from the top level MSI domain! */
+	info->ops->msi_prepare		= x86_msi_prepare;
+
+	info->chip->irq_ack		= irq_chip_ack_parent;
+	info->chip->irq_retrigger	= irq_chip_retrigger_hierarchy;
+	info->chip->flags		|= IRQCHIP_SKIP_SET_WAKE |
+					   IRQCHIP_AFFINITY_PRE_STARTUP;
 
-static struct msi_domain_info pci_msi_domain_info = {
-	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-			  MSI_FLAG_PCI_MSIX,
-	.ops		= &pci_msi_domain_ops,
-	.chip		= &pci_msi_controller,
-	.handler	= handle_edge_irq,
-	.handler_name	= "edge",
+	info->handler			= handle_edge_irq;
+	info->handler_name		= "edge";
+
+	return true;
+}
+
+static const struct msi_parent_ops x86_vector_msi_parent_ops = {
+	.supported_flags	= X86_VECTOR_MSI_FLAGS_SUPPORTED,
+	.init_dev_msi_info	= x86_init_dev_msi_info,
 };
 
 struct irq_domain * __init native_create_pci_msi_domain(void)
 {
-	struct fwnode_handle *fn;
-	struct irq_domain *d;
-
 	if (disable_apic)
 		return NULL;
 
-	fn = irq_domain_alloc_named_fwnode("PCI-MSI");
-	if (!fn)
-		return NULL;
-
-	d = pci_msi_create_irq_domain(fn, &pci_msi_domain_info,
-				      x86_vector_domain);
-	if (!d) {
-		irq_domain_free_fwnode(fn);
-		pr_warn("Failed to initialize PCI-MSI irqdomain.\n");
-	} else {
-		d->flags |= IRQ_DOMAIN_MSI_NOMASK_QUIRK;
-	}
-	return d;
+	x86_vector_domain->flags |= IRQ_DOMAIN_FLAG_MSI_PARENT;
+	x86_vector_domain->msi_parent_ops = &x86_vector_msi_parent_ops;
+	return x86_vector_domain;
 }
 
 void __init x86_create_pci_msi_domain(void)
@@ -213,41 +282,19 @@ void __init x86_create_pci_msi_domain(void)
 	x86_pci_msi_default_domain = x86_init.irqs.create_pci_msi_domain();
 }
 
-#ifdef CONFIG_IRQ_REMAP
-static struct irq_chip pci_msi_ir_controller = {
-	.name			= "IR-PCI-MSI",
-	.irq_unmask		= pci_msi_unmask_irq,
-	.irq_mask		= pci_msi_mask_irq,
-	.irq_ack		= irq_chip_ack_parent,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
-	.flags			= IRQCHIP_SKIP_SET_WAKE |
-				  IRQCHIP_AFFINITY_PRE_STARTUP,
-};
-
-static struct msi_domain_info pci_msi_ir_domain_info = {
-	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-			  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
-	.ops		= &pci_msi_domain_ops,
-	.chip		= &pci_msi_ir_controller,
-	.handler	= handle_edge_irq,
-	.handler_name	= "edge",
-};
-
-struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent,
-						    const char *name, int id)
+/* Keep around for hyperV */
+int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
+		    msi_alloc_info_t *arg)
 {
-	struct fwnode_handle *fn;
-	struct irq_domain *d;
+	init_irq_alloc_info(arg, NULL);
 
-	fn = irq_domain_alloc_named_id_fwnode(name, id);
-	if (!fn)
-		return NULL;
-	d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent);
-	if (!d)
-		irq_domain_free_fwnode(fn);
-	return d;
+	if (to_pci_dev(dev)->msix_enabled)
+		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
+	else
+		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
+	return 0;
 }
-#endif
+EXPORT_SYMBOL_GPL(pci_msi_prepare);
 
 #ifdef CONFIG_DMAR_TABLE
 /*
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 3e6f6b448f6a..c1efebd27e6c 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -539,10 +539,6 @@ static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq,
 	if (disable_apic)
 		return -ENXIO;
 
-	/* Currently vector allocator can't guarantee contiguous allocations */
-	if ((info->flags & X86_IRQ_ALLOC_CONTIGUOUS_VECTORS) && nr_irqs > 1)
-		return -ENOSYS;
-
 	/*
 	 * Catch any attempt to touch the cascade interrupt on a PIC
 	 * equipped system.
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 860b60273df3..c75d75b9f11a 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -770,8 +770,6 @@ static void init_amd_gh(struct cpuinfo_x86 *c)
 		set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
 }
 
-#define MSR_AMD64_DE_CFG	0xC0011029
-
 static void init_amd_ln(struct cpuinfo_x86 *c)
 {
 	/*
@@ -965,8 +963,8 @@ static void init_amd(struct cpuinfo_x86 *c)
 		 * msr_set_bit() uses the safe accessors, too, even if the MSR
 		 * is not present.
 		 */
-		msr_set_bit(MSR_F10H_DECFG,
-			    MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
+		msr_set_bit(MSR_AMD64_DE_CFG,
+			    MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT);
 
 		/* A serializing LFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 3e3230cccaa7..6daf84229548 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -60,11 +60,18 @@ EXPORT_SYMBOL_GPL(x86_spec_ctrl_current);
 
 static DEFINE_MUTEX(spec_ctrl_mutex);
 
+/* Update SPEC_CTRL MSR and its cached copy unconditionally */
+static void update_spec_ctrl(u64 val)
+{
+	this_cpu_write(x86_spec_ctrl_current, val);
+	wrmsrl(MSR_IA32_SPEC_CTRL, val);
+}
+
 /*
  * Keep track of the SPEC_CTRL MSR value for the current task, which may differ
  * from x86_spec_ctrl_base due to STIBP/SSB in __speculation_ctrl_update().
  */
-void write_spec_ctrl_current(u64 val, bool force)
+void update_spec_ctrl_cond(u64 val)
 {
 	if (this_cpu_read(x86_spec_ctrl_current) == val)
 		return;
@@ -75,7 +82,7 @@ void write_spec_ctrl_current(u64 val, bool force)
 	 * When KERNEL_IBRS this MSR is written on return-to-user, unless
 	 * forced the update can be delayed until that time.
 	 */
-	if (force || !cpu_feature_enabled(X86_FEATURE_KERNEL_IBRS))
+	if (!cpu_feature_enabled(X86_FEATURE_KERNEL_IBRS))
 		wrmsrl(MSR_IA32_SPEC_CTRL, val);
 }
 
@@ -1328,7 +1335,7 @@ static void __init spec_ctrl_disable_kernel_rrsba(void)
 
 	if (ia32_cap & ARCH_CAP_RRSBA) {
 		x86_spec_ctrl_base |= SPEC_CTRL_RRSBA_DIS_S;
-		write_spec_ctrl_current(x86_spec_ctrl_base, true);
+		update_spec_ctrl(x86_spec_ctrl_base);
 	}
 }
 
@@ -1450,7 +1457,7 @@ static void __init spectre_v2_select_mitigation(void)
 
 	if (spectre_v2_in_ibrs_mode(mode)) {
 		x86_spec_ctrl_base |= SPEC_CTRL_IBRS;
-		write_spec_ctrl_current(x86_spec_ctrl_base, true);
+		update_spec_ctrl(x86_spec_ctrl_base);
 	}
 
 	switch (mode) {
@@ -1564,7 +1571,7 @@ static void __init spectre_v2_select_mitigation(void)
 static void update_stibp_msr(void * __unused)
 {
 	u64 val = spec_ctrl_current() | (x86_spec_ctrl_base & SPEC_CTRL_STIBP);
-	write_spec_ctrl_current(val, true);
+	update_spec_ctrl(val);
 }
 
 /* Update x86_spec_ctrl_base in case SMT state changed. */
@@ -1797,7 +1804,7 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void)
 			x86_amd_ssb_disable();
 		} else {
 			x86_spec_ctrl_base |= SPEC_CTRL_SSBD;
-			write_spec_ctrl_current(x86_spec_ctrl_base, true);
+			update_spec_ctrl(x86_spec_ctrl_base);
 		}
 	}
 
@@ -2048,7 +2055,7 @@ int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)
 void x86_spec_ctrl_setup_ap(void)
 {
 	if (boot_cpu_has(X86_FEATURE_MSR_SPEC_CTRL))
-		write_spec_ctrl_current(x86_spec_ctrl_base, true);
+		update_spec_ctrl(x86_spec_ctrl_base);
 
 	if (ssb_mode == SPEC_STORE_BYPASS_DISABLE)
 		x86_amd_ssb_disable();
diff --git a/arch/x86/kernel/cpu/cpuid-deps.c b/arch/x86/kernel/cpu/cpuid-deps.c
index c881bcafba7d..d95221117129 100644
--- a/arch/x86/kernel/cpu/cpuid-deps.c
+++ b/arch/x86/kernel/cpu/cpuid-deps.c
@@ -75,6 +75,7 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_SGX_LC,			X86_FEATURE_SGX	      },
 	{ X86_FEATURE_SGX1,			X86_FEATURE_SGX       },
 	{ X86_FEATURE_SGX2,			X86_FEATURE_SGX1      },
+	{ X86_FEATURE_SGX_EDECCSSA,		X86_FEATURE_SGX1      },
 	{ X86_FEATURE_XFD,			X86_FEATURE_XSAVES    },
 	{ X86_FEATURE_XFD,			X86_FEATURE_XGETBV1   },
 	{ X86_FEATURE_AMX_TILE,			X86_FEATURE_XFD       },
diff --git a/arch/x86/kernel/cpu/hygon.c b/arch/x86/kernel/cpu/hygon.c
index 21fd425088fe..c393b8773ace 100644
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -326,8 +326,8 @@ static void init_hygon(struct cpuinfo_x86 *c)
 		 * msr_set_bit() uses the safe accessors, too, even if the MSR
 		 * is not present.
 		 */
-		msr_set_bit(MSR_F10H_DECFG,
-			    MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
+		msr_set_bit(MSR_AMD64_DE_CFG,
+			    MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT);
 
 		/* A serializing LFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 2d7ea5480ec3..427899650483 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -1034,8 +1034,32 @@ static const struct {
 
 static struct ratelimit_state bld_ratelimit;
 
+static unsigned int sysctl_sld_mitigate = 1;
 static DEFINE_SEMAPHORE(buslock_sem);
 
+#ifdef CONFIG_PROC_SYSCTL
+static struct ctl_table sld_sysctls[] = {
+	{
+		.procname       = "split_lock_mitigate",
+		.data           = &sysctl_sld_mitigate,
+		.maxlen         = sizeof(unsigned int),
+		.mode           = 0644,
+		.proc_handler	= proc_douintvec_minmax,
+		.extra1         = SYSCTL_ZERO,
+		.extra2         = SYSCTL_ONE,
+	},
+	{}
+};
+
+static int __init sld_mitigate_sysctl_init(void)
+{
+	register_sysctl_init("kernel", sld_sysctls);
+	return 0;
+}
+
+late_initcall(sld_mitigate_sysctl_init);
+#endif
+
 static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
 	int len = strlen(opt), ratelimit;
@@ -1146,12 +1170,20 @@ static void split_lock_init(void)
 		split_lock_verify_msr(sld_state != sld_off);
 }
 
-static void __split_lock_reenable(struct work_struct *work)
+static void __split_lock_reenable_unlock(struct work_struct *work)
 {
 	sld_update_msr(true);
 	up(&buslock_sem);
 }
 
+static DECLARE_DELAYED_WORK(sl_reenable_unlock, __split_lock_reenable_unlock);
+
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+}
+static DECLARE_DELAYED_WORK(sl_reenable, __split_lock_reenable);
+
 /*
  * If a CPU goes offline with pending delayed work to re-enable split lock
  * detection then the delayed work will be executed on some other CPU. That
@@ -1169,10 +1201,9 @@ static int splitlock_cpu_offline(unsigned int cpu)
 	return 0;
 }
 
-static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
-
 static void split_lock_warn(unsigned long ip)
 {
+	struct delayed_work *work;
 	int cpu;
 
 	if (!current->reported_split_lock)
@@ -1180,14 +1211,26 @@ static void split_lock_warn(unsigned long ip)
 				    current->comm, current->pid, ip);
 	current->reported_split_lock = 1;
 
-	/* misery factor #1, sleep 10ms before trying to execute split lock */
-	if (msleep_interruptible(10) > 0)
-		return;
-	/* Misery factor #2, only allow one buslocked disabled core at a time */
-	if (down_interruptible(&buslock_sem) == -EINTR)
-		return;
+	if (sysctl_sld_mitigate) {
+		/*
+		 * misery factor #1:
+		 * sleep 10ms before trying to execute split lock.
+		 */
+		if (msleep_interruptible(10) > 0)
+			return;
+		/*
+		 * Misery factor #2:
+		 * only allow one buslocked disabled core at a time.
+		 */
+		if (down_interruptible(&buslock_sem) == -EINTR)
+			return;
+		work = &sl_reenable_unlock;
+	} else {
+		work = &sl_reenable;
+	}
+
 	cpu = get_cpu();
-	schedule_delayed_work_on(cpu, &split_lock_reenable, 2);
+	schedule_delayed_work_on(cpu, work, 2);
 
 	/* Disable split lock detection on this CPU to make progress */
 	sld_update_msr(false);
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 1c87501e0fa3..10fb5b5c9efa 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -788,6 +788,24 @@ _log_error_bank(unsigned int bank, u32 msr_stat, u32 msr_addr, u64 misc)
 	return status & MCI_STATUS_DEFERRED;
 }
 
+static bool _log_error_deferred(unsigned int bank, u32 misc)
+{
+	if (!_log_error_bank(bank, mca_msr_reg(bank, MCA_STATUS),
+			     mca_msr_reg(bank, MCA_ADDR), misc))
+		return false;
+
+	/*
+	 * Non-SMCA systems don't have MCA_DESTAT/MCA_DEADDR registers.
+	 * Return true here to avoid accessing these registers.
+	 */
+	if (!mce_flags.smca)
+		return true;
+
+	/* Clear MCA_DESTAT if the deferred error was logged from MCA_STATUS. */
+	wrmsrl(MSR_AMD64_SMCA_MCx_DESTAT(bank), 0);
+	return true;
+}
+
 /*
  * We have three scenarios for checking for Deferred errors:
  *
@@ -799,19 +817,8 @@ _log_error_bank(unsigned int bank, u32 msr_stat, u32 msr_addr, u64 misc)
  */
 static void log_error_deferred(unsigned int bank)
 {
-	bool defrd;
-
-	defrd = _log_error_bank(bank, mca_msr_reg(bank, MCA_STATUS),
-				mca_msr_reg(bank, MCA_ADDR), 0);
-
-	if (!mce_flags.smca)
-		return;
-
-	/* Clear MCA_DESTAT if we logged the deferred error from MCA_STATUS. */
-	if (defrd) {
-		wrmsrl(MSR_AMD64_SMCA_MCx_DESTAT(bank), 0);
+	if (_log_error_deferred(bank, 0))
 		return;
-	}
 
 	/*
 	 * Only deferred errors are logged in MCA_DE{STAT,ADDR} so just check
@@ -832,7 +839,7 @@ static void amd_deferred_error_interrupt(void)
 
 static void log_error_thresholding(unsigned int bank, u64 misc)
 {
-	_log_error_bank(bank, mca_msr_reg(bank, MCA_STATUS), mca_msr_reg(bank, MCA_ADDR), misc);
+	_log_error_deferred(bank, misc);
 }
 
 static void log_and_reset_block(struct threshold_block *block)
diff --git a/arch/x86/kernel/cpu/mce/severity.c b/arch/x86/kernel/cpu/mce/severity.c
index 00483d1c27e4..c4477162c07d 100644
--- a/arch/x86/kernel/cpu/mce/severity.c
+++ b/arch/x86/kernel/cpu/mce/severity.c
@@ -203,6 +203,11 @@ static struct severity {
 		BITSET(MCI_STATUS_OVER|MCI_STATUS_UC)
 		),
 	MCESEV(
+		PANIC, "Uncorrected in kernel",
+		BITSET(MCI_STATUS_UC),
+		KERNEL
+		),
+	MCESEV(
 		UC, "Uncorrected",
 		BITSET(MCI_STATUS_UC)
 		),
@@ -391,9 +396,6 @@ static noinstr int mce_severity_intel(struct mce *m, struct pt_regs *regs, char
 			*msg = s->msg;
 		s->covered = 1;
 
-		if (s->sev >= MCE_UC_SEVERITY && ctx == IN_KERNEL)
-			return MCE_PANIC_SEVERITY;
-
 		return s->sev;
 	}
 }
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 831613959a92..46668e255421 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -475,6 +475,12 @@ static bool __init ms_hyperv_x2apic_available(void)
  * (logically) generates MSIs directly to the system APIC irq domain.
  * There is no HPET, and PCI MSI/MSI-X interrupts are remapped by the
  * pci-hyperv host bridge.
+ *
+ * Note: for a Hyper-V root partition, this will always return false.
+ * The hypervisor doesn't expose these HYPERV_CPUID_VIRT_STACK_* cpuids by
+ * default, they are implemented as intercepts by the Windows Hyper-V stack.
+ * Even a nested root partition (L2 root) will not get them because the
+ * nested (L1) hypervisor filters them out.
  */
 static bool __init ms_hyperv_msi_ext_dest_id(void)
 {
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 3266ea36667c..c98e52ff5f20 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -575,7 +575,7 @@ static void clear_closid_rmid(int cpu)
 	state->default_rmid = 0;
 	state->cur_closid = 0;
 	state->cur_rmid = 0;
-	wrmsr(IA32_PQR_ASSOC, 0, 0);
+	wrmsr(MSR_IA32_PQR_ASSOC, 0, 0);
 }
 
 static int resctrl_online_cpu(unsigned int cpu)
@@ -828,7 +828,6 @@ static __init void rdt_init_res_defs_intel(void)
 		if (r->rid == RDT_RESOURCE_L3 ||
 		    r->rid == RDT_RESOURCE_L2) {
 			r->cache.arch_has_sparse_bitmaps = false;
-			r->cache.arch_has_empty_bitmaps = false;
 			r->cache.arch_has_per_cpu_cfg = false;
 			r->cache.min_cbm_bits = 1;
 		} else if (r->rid == RDT_RESOURCE_MBA) {
@@ -849,7 +848,6 @@ static __init void rdt_init_res_defs_amd(void)
 		if (r->rid == RDT_RESOURCE_L3 ||
 		    r->rid == RDT_RESOURCE_L2) {
 			r->cache.arch_has_sparse_bitmaps = true;
-			r->cache.arch_has_empty_bitmaps = true;
 			r->cache.arch_has_per_cpu_cfg = true;
 			r->cache.min_cbm_bits = 0;
 		} else if (r->rid == RDT_RESOURCE_MBA) {
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 1dafbdc5ac31..1df0e3262bca 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -105,8 +105,7 @@ static bool cbm_validate(char *buf, u32 *data, struct rdt_resource *r)
 		return false;
 	}
 
-	if ((!r->cache.arch_has_empty_bitmaps && val == 0) ||
-	    val > r->default_ctrl) {
+	if ((r->cache.min_cbm_bits > 0 && val == 0) || val > r->default_ctrl) {
 		rdt_last_cmd_puts("Mask out of range\n");
 		return false;
 	}
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 5f7128686cfd..5ebd28e6aa0c 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -8,16 +8,6 @@
 #include <linux/fs_context.h>
 #include <linux/jump_label.h>
 
-#define MSR_IA32_L3_QOS_CFG		0xc81
-#define MSR_IA32_L2_QOS_CFG		0xc82
-#define MSR_IA32_L3_CBM_BASE		0xc90
-#define MSR_IA32_L2_CBM_BASE		0xd10
-#define MSR_IA32_MBA_THRTL_BASE		0xd50
-#define MSR_IA32_MBA_BW_BASE		0xc0000200
-
-#define MSR_IA32_QM_CTR			0x0c8e
-#define MSR_IA32_QM_EVTSEL		0x0c8d
-
 #define L3_QOS_CDP_ENABLE		0x01ULL
 
 #define L2_QOS_CDP_ENABLE		0x01ULL
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index d961ae3ed96e..ba8d0763b36b 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -477,7 +477,7 @@ static int pseudo_lock_fn(void *_rdtgrp)
 	 * pseudo-locked followed by reading of kernel memory to load it
 	 * into the cache.
 	 */
-	__wrmsr(IA32_PQR_ASSOC, rmid_p, rdtgrp->closid);
+	__wrmsr(MSR_IA32_PQR_ASSOC, rmid_p, rdtgrp->closid);
 	/*
 	 * Cache was flushed earlier. Now access kernel memory to read it
 	 * into cache region associated with just activated plr->closid.
@@ -513,7 +513,7 @@ static int pseudo_lock_fn(void *_rdtgrp)
 	 * Critical section end: restore closid with capacity bitmask that
 	 * does not overlap with pseudo-locked region.
 	 */
-	__wrmsr(IA32_PQR_ASSOC, rmid_p, closid_p);
+	__wrmsr(MSR_IA32_PQR_ASSOC, rmid_p, closid_p);
 
 	/* Re-enable the hardware prefetcher(s) */
 	wrmsrl(MSR_MISC_FEATURE_CONTROL, saved_msr);
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index fc01f81f6e2a..f53944fb8f7f 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -40,6 +40,7 @@ static const struct cpuid_bit cpuid_bits[] = {
 	{ X86_FEATURE_PER_THREAD_MBA,	CPUID_ECX,  0, 0x00000010, 3 },
 	{ X86_FEATURE_SGX1,		CPUID_EAX,  0, 0x00000012, 0 },
 	{ X86_FEATURE_SGX2,		CPUID_EAX,  1, 0x00000012, 0 },
+	{ X86_FEATURE_SGX_EDECCSSA,	CPUID_EAX, 11, 0x00000012, 0 },
 	{ X86_FEATURE_HW_PSTATE,	CPUID_EDX,  7, 0x80000007, 0 },
 	{ X86_FEATURE_CPB,		CPUID_EDX,  9, 0x80000007, 0 },
 	{ X86_FEATURE_PROC_FEEDBACK,    CPUID_EDX, 11, 0x80000007, 0 },
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
index 1ec20807de1e..68f8b18d2278 100644
--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -160,8 +160,8 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 		return ret;
 
 	pginfo.addr = encl_page->desc & PAGE_MASK;
-	pginfo.contents = (unsigned long)kmap_atomic(b.contents);
-	pcmd_page = kmap_atomic(b.pcmd);
+	pginfo.contents = (unsigned long)kmap_local_page(b.contents);
+	pcmd_page = kmap_local_page(b.pcmd);
 	pginfo.metadata = (unsigned long)pcmd_page + b.pcmd_offset;
 
 	if (secs_page)
@@ -187,8 +187,8 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 	 */
 	pcmd_page_empty = !memchr_inv(pcmd_page, 0, PAGE_SIZE);
 
-	kunmap_atomic(pcmd_page);
-	kunmap_atomic((void *)(unsigned long)pginfo.contents);
+	kunmap_local(pcmd_page);
+	kunmap_local((void *)(unsigned long)pginfo.contents);
 
 	get_page(b.pcmd);
 	sgx_encl_put_backing(&b);
@@ -197,10 +197,10 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 
 	if (pcmd_page_empty && !reclaimer_writing_to_pcmd(encl, pcmd_first_page)) {
 		sgx_encl_truncate_backing_page(encl, PFN_DOWN(page_pcmd_off));
-		pcmd_page = kmap_atomic(b.pcmd);
+		pcmd_page = kmap_local_page(b.pcmd);
 		if (memchr_inv(pcmd_page, 0, PAGE_SIZE))
 			pr_warn("PCMD page not empty after truncate.\n");
-		kunmap_atomic(pcmd_page);
+		kunmap_local(pcmd_page);
 	}
 
 	put_page(b.pcmd);
@@ -680,11 +680,15 @@ const struct vm_operations_struct sgx_vm_ops = {
 void sgx_encl_release(struct kref *ref)
 {
 	struct sgx_encl *encl = container_of(ref, struct sgx_encl, refcount);
+	unsigned long max_page_index = PFN_DOWN(encl->base + encl->size - 1);
 	struct sgx_va_page *va_page;
 	struct sgx_encl_page *entry;
-	unsigned long index;
+	unsigned long count = 0;
+
+	XA_STATE(xas, &encl->page_array, PFN_DOWN(encl->base));
 
-	xa_for_each(&encl->page_array, index, entry) {
+	xas_lock(&xas);
+	xas_for_each(&xas, entry, max_page_index) {
 		if (entry->epc_page) {
 			/*
 			 * The page and its radix tree entry cannot be freed
@@ -699,9 +703,20 @@ void sgx_encl_release(struct kref *ref)
 		}
 
 		kfree(entry);
-		/* Invoke scheduler to prevent soft lockups. */
-		cond_resched();
+		/*
+		 * Invoke scheduler on every XA_CHECK_SCHED iteration
+		 * to prevent soft lockups.
+		 */
+		if (!(++count % XA_CHECK_SCHED)) {
+			xas_pause(&xas);
+			xas_unlock(&xas);
+
+			cond_resched();
+
+			xas_lock(&xas);
+		}
 	}
+	xas_unlock(&xas);
 
 	xa_destroy(&encl->page_array);
 
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
index ebe79d60619f..21ca0a831b70 100644
--- a/arch/x86/kernel/cpu/sgx/ioctl.c
+++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -111,7 +111,7 @@ static int sgx_encl_create(struct sgx_encl *encl, struct sgx_secs *secs)
 	encl->base = secs->base;
 	encl->size = secs->size;
 	encl->attributes = secs->attributes;
-	encl->attributes_mask = SGX_ATTR_DEBUG | SGX_ATTR_MODE64BIT | SGX_ATTR_KSS;
+	encl->attributes_mask = SGX_ATTR_UNPRIV_MASK;
 
 	/* Set only after completion, as encl->lock has not been taken. */
 	set_bit(SGX_ENCL_CREATED, &encl->flags);
@@ -221,11 +221,11 @@ static int __sgx_encl_add_page(struct sgx_encl *encl,
 	pginfo.secs = (unsigned long)sgx_get_epc_virt_addr(encl->secs.epc_page);
 	pginfo.addr = encl_page->desc & PAGE_MASK;
 	pginfo.metadata = (unsigned long)secinfo;
-	pginfo.contents = (unsigned long)kmap_atomic(src_page);
+	pginfo.contents = (unsigned long)kmap_local_page(src_page);
 
 	ret = __eadd(&pginfo, sgx_get_epc_virt_addr(epc_page));
 
-	kunmap_atomic((void *)pginfo.contents);
+	kunmap_local((void *)pginfo.contents);
 	put_page(src_page);
 
 	return ret ? -EIO : 0;
@@ -356,6 +356,9 @@ static int sgx_validate_offset_length(struct sgx_encl *encl,
 	if (!length || !IS_ALIGNED(length, PAGE_SIZE))
 		return -EINVAL;
 
+	if (offset + length < offset)
+		return -EINVAL;
+
 	if (offset + length - PAGE_SIZE >= encl->size)
 		return -EINVAL;
 
diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c
index 0aad028f04d4..e5a37b6e9aa5 100644
--- a/arch/x86/kernel/cpu/sgx/main.c
+++ b/arch/x86/kernel/cpu/sgx/main.c
@@ -165,17 +165,17 @@ static int __sgx_encl_ewb(struct sgx_epc_page *epc_page, void *va_slot,
 	pginfo.addr = 0;
 	pginfo.secs = 0;
 
-	pginfo.contents = (unsigned long)kmap_atomic(backing->contents);
-	pginfo.metadata = (unsigned long)kmap_atomic(backing->pcmd) +
+	pginfo.contents = (unsigned long)kmap_local_page(backing->contents);
+	pginfo.metadata = (unsigned long)kmap_local_page(backing->pcmd) +
 			  backing->pcmd_offset;
 
 	ret = __ewb(&pginfo, sgx_get_epc_virt_addr(epc_page), va_slot);
 	set_page_dirty(backing->pcmd);
 	set_page_dirty(backing->contents);
 
-	kunmap_atomic((void *)(unsigned long)(pginfo.metadata -
+	kunmap_local((void *)(unsigned long)(pginfo.metadata -
 					      backing->pcmd_offset));
-	kunmap_atomic((void *)(unsigned long)pginfo.contents);
+	kunmap_local((void *)(unsigned long)pginfo.contents);
 
 	return ret;
 }
diff --git a/arch/x86/kernel/cpu/tsx.c b/arch/x86/kernel/cpu/tsx.c
index ec7bbac3a9f2..8009c8346d8f 100644
--- a/arch/x86/kernel/cpu/tsx.c
+++ b/arch/x86/kernel/cpu/tsx.c
@@ -58,24 +58,6 @@ static void tsx_enable(void)
 	wrmsrl(MSR_IA32_TSX_CTRL, tsx);
 }
 
-static bool tsx_ctrl_is_supported(void)
-{
-	u64 ia32_cap = x86_read_arch_cap_msr();
-
-	/*
-	 * TSX is controlled via MSR_IA32_TSX_CTRL.  However, support for this
-	 * MSR is enumerated by ARCH_CAP_TSX_MSR bit in MSR_IA32_ARCH_CAPABILITIES.
-	 *
-	 * TSX control (aka MSR_IA32_TSX_CTRL) is only available after a
-	 * microcode update on CPUs that have their MSR_IA32_ARCH_CAPABILITIES
-	 * bit MDS_NO=1. CPUs with MDS_NO=0 are not planned to get
-	 * MSR_IA32_TSX_CTRL support even after a microcode update. Thus,
-	 * tsx= cmdline requests will do nothing on CPUs without
-	 * MSR_IA32_TSX_CTRL support.
-	 */
-	return !!(ia32_cap & ARCH_CAP_TSX_CTRL_MSR);
-}
-
 static enum tsx_ctrl_states x86_get_tsx_auto_mode(void)
 {
 	if (boot_cpu_has_bug(X86_BUG_TAA))
@@ -135,7 +117,7 @@ static void tsx_clear_cpuid(void)
 		rdmsrl(MSR_TSX_FORCE_ABORT, msr);
 		msr |= MSR_TFA_TSX_CPUID_CLEAR;
 		wrmsrl(MSR_TSX_FORCE_ABORT, msr);
-	} else if (tsx_ctrl_is_supported()) {
+	} else if (cpu_feature_enabled(X86_FEATURE_MSR_TSX_CTRL)) {
 		rdmsrl(MSR_IA32_TSX_CTRL, msr);
 		msr |= TSX_CTRL_CPUID_CLEAR;
 		wrmsrl(MSR_IA32_TSX_CTRL, msr);
@@ -158,7 +140,8 @@ static void tsx_dev_mode_disable(void)
 	u64 mcu_opt_ctrl;
 
 	/* Check if RTM_ALLOW exists */
-	if (!boot_cpu_has_bug(X86_BUG_TAA) || !tsx_ctrl_is_supported() ||
+	if (!boot_cpu_has_bug(X86_BUG_TAA) ||
+	    !cpu_feature_enabled(X86_FEATURE_MSR_TSX_CTRL) ||
 	    !cpu_feature_enabled(X86_FEATURE_SRBDS_CTRL))
 		return;
 
@@ -191,7 +174,20 @@ void __init tsx_init(void)
 		return;
 	}
 
-	if (!tsx_ctrl_is_supported()) {
+	/*
+	 * TSX is controlled via MSR_IA32_TSX_CTRL.  However, support for this
+	 * MSR is enumerated by ARCH_CAP_TSX_MSR bit in MSR_IA32_ARCH_CAPABILITIES.
+	 *
+	 * TSX control (aka MSR_IA32_TSX_CTRL) is only available after a
+	 * microcode update on CPUs that have their MSR_IA32_ARCH_CAPABILITIES
+	 * bit MDS_NO=1. CPUs with MDS_NO=0 are not planned to get
+	 * MSR_IA32_TSX_CTRL support even after a microcode update. Thus,
+	 * tsx= cmdline requests will do nothing on CPUs without
+	 * MSR_IA32_TSX_CTRL support.
+	 */
+	if (x86_read_arch_cap_msr() & ARCH_CAP_TSX_CTRL_MSR) {
+		setup_force_cpu_cap(X86_FEATURE_MSR_TSX_CTRL);
+	} else {
 		tsx_ctrl_state = TSX_CTRL_NOT_SUPPORTED;
 		return;
 	}
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 5cd51f25f446..28da5dd83fc0 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -31,11 +31,6 @@ char __initdata cmd_line[COMMAND_LINE_SIZE];
 
 int __initdata of_ioapic;
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	BUG();
-}
-
 void __init add_dtb(u64 data)
 {
 	initial_dtb = data + offsetof(struct setup_data, data);
@@ -167,7 +162,14 @@ static void __init dtb_lapic_setup(void)
 			return;
 	}
 	smp_found_config = 1;
-	pic_mode = 1;
+	if (of_property_read_bool(dn, "intel,virtual-wire-mode")) {
+		pr_info("Virtual Wire compatibility mode.\n");
+		pic_mode = 0;
+	} else {
+		pr_info("IMCR and PIC compatibility mode.\n");
+		pic_mode = 1;
+	}
+
 	register_lapic_address(lapic_addr);
 }
 
@@ -248,7 +250,7 @@ static void __init dtb_add_ioapic(struct device_node *dn)
 
 	ret = of_address_to_resource(dn, 0, &r);
 	if (ret) {
-		printk(KERN_ERR "Can't obtain address from device node %pOF.\n", dn);
+		pr_err("Can't obtain address from device node %pOF.\n", dn);
 		return;
 	}
 	mp_register_ioapic(++ioapic_id, r.start, gsi_top, &cfg);
@@ -265,7 +267,7 @@ static void __init dtb_ioapic_setup(void)
 		of_ioapic = 1;
 		return;
 	}
-	printk(KERN_ERR "Error: No information about IO-APIC in OF.\n");
+	pr_err("Error: No information about IO-APIC in OF.\n");
 }
 #else
 static void __init dtb_ioapic_setup(void) {}
diff --git a/arch/x86/kernel/espfix_64.c b/arch/x86/kernel/espfix_64.c
index 9417d5aa7305..16f9814c9be0 100644
--- a/arch/x86/kernel/espfix_64.c
+++ b/arch/x86/kernel/espfix_64.c
@@ -94,17 +94,7 @@ static inline unsigned long espfix_base_addr(unsigned int cpu)
 
 static void init_espfix_random(void)
 {
-	unsigned long rand;
-
-	/*
-	 * This is run before the entropy pools are initialized,
-	 * but this is hopefully better than nothing.
-	 */
-	if (!arch_get_random_longs(&rand, 1)) {
-		/* The constant is an arbitrary large prime */
-		rand = rdtsc();
-		rand *= 0xc345c6b72fd16123UL;
-	}
+	unsigned long rand = get_random_long();
 
 	slot_random = rand % ESPFIX_STACKS_PER_PAGE;
 	page_random = (rand / ESPFIX_STACKS_PER_PAGE)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 3b28c5b25e12..9baa89a8877d 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -391,8 +391,6 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf,
 {
 	struct fpstate *kstate = gfpu->fpstate;
 	const union fpregs_state *ustate = buf;
-	struct pkru_state *xpkru;
-	int ret;
 
 	if (!cpu_feature_enabled(X86_FEATURE_XSAVE)) {
 		if (ustate->xsave.header.xfeatures & ~XFEATURE_MASK_FPSSE)
@@ -406,16 +404,15 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf,
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
-	ret = copy_uabi_from_kernel_to_xstate(kstate, ustate);
-	if (ret)
-		return ret;
+	/*
+	 * Nullify @vpkru to preserve its current value if PKRU's bit isn't set
+	 * in the header.  KVM's odd ABI is to leave PKRU untouched in this
+	 * case (all other components are eventually re-initialized).
+	 */
+	if (!(ustate->xsave.header.xfeatures & XFEATURE_MASK_PKRU))
+		vpkru = NULL;
 
-	/* Retrieve PKRU if not in init state */
-	if (kstate->regs.xsave.header.xfeatures & XFEATURE_MASK_PKRU) {
-		xpkru = get_xsave_addr(&kstate->regs.xsave, XFEATURE_PKRU);
-		*vpkru = xpkru->pkru;
-	}
-	return 0;
+	return copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru);
 }
 EXPORT_SYMBOL_GPL(fpu_copy_uabi_to_guest_fpstate);
 #endif /* CONFIG_KVM */
@@ -605,9 +602,9 @@ int fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal)
 	if (test_thread_flag(TIF_NEED_FPU_LOAD))
 		fpregs_restore_userregs();
 	save_fpregs_to_fpstate(dst_fpu);
+	fpregs_unlock();
 	if (!(clone_flags & CLONE_THREAD))
 		fpu_inherit_perms(dst_fpu);
-	fpregs_unlock();
 
 	/*
 	 * Children never inherit PASID state.
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 8946f89761cc..851eb13edc01 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -133,9 +133,6 @@ static void __init fpu__init_system_generic(void)
 	fpu__init_system_mxcsr();
 }
 
-/* Get alignment of the TYPE. */
-#define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test)
-
 /*
  * Enforce that 'MEMBER' is the last field of 'TYPE'.
  *
@@ -143,8 +140,8 @@ static void __init fpu__init_system_generic(void)
  * because that's how C aligns structs.
  */
 #define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
-	BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \
-					   TYPE_ALIGN(TYPE)))
+	BUILD_BUG_ON(sizeof(TYPE) !=         \
+		     ALIGN(offsetofend(TYPE, MEMBER), _Alignof(TYPE)))
 
 /*
  * We append the 'struct fpu' to the task_struct:
diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
index 75ffaef8c299..6d056b68f4ed 100644
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -167,7 +167,7 @@ int xstateregs_set(struct task_struct *target, const struct user_regset *regset,
 	}
 
 	fpu_force_restore(fpu);
-	ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf);
+	ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf, &target->thread.pkru);
 
 out:
 	vfree(tmpbuf);
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 91d4b6de58ab..558076dbde5b 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -396,7 +396,7 @@ static bool __fpu_restore_sig(void __user *buf, void __user *buf_fx,
 
 	fpregs = &fpu->fpstate->regs;
 	if (use_xsave() && !fx_only) {
-		if (copy_sigframe_from_user_to_xstate(fpu->fpstate, buf_fx))
+		if (copy_sigframe_from_user_to_xstate(tsk, buf_fx))
 			return false;
 	} else {
 		if (__copy_from_user(&fpregs->fxsave, buf_fx,
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 59e543b95a3c..714166cc25f2 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -440,8 +440,8 @@ static void __init __xstate_dump_leaves(void)
 	}
 }
 
-#define XSTATE_WARN_ON(x) do {							\
-	if (WARN_ONCE(x, "XSAVE consistency problem, dumping leaves")) {	\
+#define XSTATE_WARN_ON(x, fmt, ...) do {					\
+	if (WARN_ONCE(x, "XSAVE consistency problem: " fmt, ##__VA_ARGS__)) {	\
 		__xstate_dump_leaves();						\
 	}									\
 } while (0)
@@ -554,8 +554,7 @@ static bool __init check_xstate_against_struct(int nr)
 	    (nr >= XFEATURE_MAX) ||
 	    (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR) ||
 	    ((nr >= XFEATURE_RSRVD_COMP_11) && (nr <= XFEATURE_RSRVD_COMP_16))) {
-		WARN_ONCE(1, "no structure for xstate: %d\n", nr);
-		XSTATE_WARN_ON(1);
+		XSTATE_WARN_ON(1, "No structure for xstate: %d\n", nr);
 		return false;
 	}
 	return true;
@@ -598,12 +597,13 @@ static bool __init paranoid_xstate_size_valid(unsigned int kernel_size)
 		 * XSAVES.
 		 */
 		if (!xsaves && xfeature_is_supervisor(i)) {
-			XSTATE_WARN_ON(1);
+			XSTATE_WARN_ON(1, "Got supervisor feature %d, but XSAVES not advertised\n", i);
 			return false;
 		}
 	}
 	size = xstate_calculate_size(fpu_kernel_cfg.max_features, compacted);
-	XSTATE_WARN_ON(size != kernel_size);
+	XSTATE_WARN_ON(size != kernel_size,
+		       "size %u != kernel_size %u\n", size, kernel_size);
 	return size == kernel_size;
 }
 
@@ -1200,8 +1200,36 @@ static int copy_from_buffer(void *dst, unsigned int offset, unsigned int size,
 }
 
 
+/**
+ * copy_uabi_to_xstate - Copy a UABI format buffer to the kernel xstate
+ * @fpstate:	The fpstate buffer to copy to
+ * @kbuf:	The UABI format buffer, if it comes from the kernel
+ * @ubuf:	The UABI format buffer, if it comes from userspace
+ * @pkru:	The location to write the PKRU value to
+ *
+ * Converts from the UABI format into the kernel internal hardware
+ * dependent format.
+ *
+ * This function ultimately has three different callers with distinct PKRU
+ * behavior.
+ * 1.	When called from sigreturn the PKRU register will be restored from
+ *	@fpstate via an XRSTOR. Correctly copying the UABI format buffer to
+ *	@fpstate is sufficient to cover this case, but the caller will also
+ *	pass a pointer to the thread_struct's pkru field in @pkru and updating
+ *	it is harmless.
+ * 2.	When called from ptrace the PKRU register will be restored from the
+ *	thread_struct's pkru field. A pointer to that is passed in @pkru.
+ *	The kernel will restore it manually, so the XRSTOR behavior that resets
+ *	the PKRU register to the hardware init value (0) if the corresponding
+ *	xfeatures bit is not set is emulated here.
+ * 3.	When called from KVM the PKRU register will be restored from the vcpu's
+ *	pkru field. A pointer to that is passed in @pkru. KVM hasn't used
+ *	XRSTOR and hasn't had the PKRU resetting behavior described above. To
+ *	preserve that KVM behavior, it passes NULL for @pkru if the xfeatures
+ *	bit is not set.
+ */
 static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
-			       const void __user *ubuf)
+			       const void __user *ubuf, u32 *pkru)
 {
 	struct xregs_state *xsave = &fpstate->regs.xsave;
 	unsigned int offset, size;
@@ -1250,6 +1278,20 @@ static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
 		}
 	}
 
+	if (hdr.xfeatures & XFEATURE_MASK_PKRU) {
+		struct pkru_state *xpkru;
+
+		xpkru = __raw_xsave_addr(xsave, XFEATURE_PKRU);
+		*pkru = xpkru->pkru;
+	} else {
+		/*
+		 * KVM may pass NULL here to indicate that it does not need
+		 * PKRU updated.
+		 */
+		if (pkru)
+			*pkru = 0;
+	}
+
 	/*
 	 * The state that came in from userspace was user-state only.
 	 * Mask all the user states out of 'xfeatures':
@@ -1268,9 +1310,9 @@ static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
  * Convert from a ptrace standard-format kernel buffer to kernel XSAVE[S]
  * format and copy to the target thread. Used by ptrace and KVM.
  */
-int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf)
+int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru)
 {
-	return copy_uabi_to_xstate(fpstate, kbuf, NULL);
+	return copy_uabi_to_xstate(fpstate, kbuf, NULL, pkru);
 }
 
 /*
@@ -1278,10 +1320,10 @@ int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf)
  * XSAVE[S] format and copy to the target thread. This is called from the
  * sigreturn() and rt_sigreturn() system calls.
  */
-int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate,
+int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
 				      const void __user *ubuf)
 {
-	return copy_uabi_to_xstate(fpstate, NULL, ubuf);
+	return copy_uabi_to_xstate(tsk->thread.fpu.fpstate, NULL, ubuf, &tsk->thread.pkru);
 }
 
 static bool validate_independent_components(u64 mask)
diff --git a/arch/x86/kernel/fpu/xstate.h b/arch/x86/kernel/fpu/xstate.h
index 5ad47031383b..a4ecb04d8d64 100644
--- a/arch/x86/kernel/fpu/xstate.h
+++ b/arch/x86/kernel/fpu/xstate.h
@@ -46,8 +46,8 @@ extern void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate,
 				      u32 pkru_val, enum xstate_copy_mode copy_mode);
 extern void copy_xstate_to_uabi_buf(struct membuf to, struct task_struct *tsk,
 				    enum xstate_copy_mode mode);
-extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf);
-extern int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate, const void __user *ubuf);
+extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru);
+extern int copy_sigframe_from_user_to_xstate(struct task_struct *tsk, const void __user *ubuf);
 
 
 extern void fpu__init_cpu_xstate(void);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 9b7acc9c7874..67c8ed99144b 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -261,16 +261,6 @@ SYM_FUNC_START(startup_32_smp)
 	addl $__PAGE_OFFSET, %esp
 
 /*
- * start system 32-bit setup. We need to re-do some of the things done
- * in 16-bit mode for the "real" operations.
- */
-	movl setup_once_ref,%eax
-	andl %eax,%eax
-	jz 1f				# Did we do this already?
-	call *%eax
-1:
-
-/*
  * Check if it is 486
  */
 	movb $4,X86			# at least 486
@@ -331,18 +321,7 @@ SYM_FUNC_END(startup_32_smp)
 
 #include "verify_cpu.S"
 
-/*
- *  setup_once
- *
- *  The setup work we only want to run on the BSP.
- *
- *  Warning: %esi is live across this function.
- */
 __INIT
-setup_once:
-	andl $0,setup_once_ref	/* Once is enough, thanks */
-	RET
-
 SYM_FUNC_START(early_idt_handler_array)
 	# 36(%esp) %eflags
 	# 32(%esp) %cs
@@ -458,7 +437,6 @@ SYM_DATA(early_recursion_flag, .long 0)
 __REFDATA
 	.align 4
 SYM_DATA(initial_code,		.long i386_start_kernel)
-SYM_DATA(setup_once_ref,	.long setup_once)
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 #define	PGD_ALIGN	(2 * PAGE_SIZE)
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 15aefa3f3e18..3aa5304200c5 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -407,7 +407,7 @@ struct legacy_pic null_legacy_pic = {
 	.make_irq = legacy_pic_uint_noop,
 };
 
-struct legacy_pic default_legacy_pic = {
+static struct legacy_pic default_legacy_pic = {
 	.nr_legacy_irqs = NR_IRQS_LEGACY,
 	.chip  = &i8259A_chip,
 	.mask = mask_8259A_irq,
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index a98687642dd0..d85a6980e263 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -251,14 +251,12 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
+	const Elf_Shdr *s, *alt = NULL, *locks = NULL,
 		*para = NULL, *orc = NULL, *orc_ip = NULL,
 		*retpolines = NULL, *returns = NULL, *ibt_endbr = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
 	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
-		if (!strcmp(".text", secstrings + s->sh_name))
-			text = s;
 		if (!strcmp(".altinstructions", secstrings + s->sh_name))
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
@@ -302,12 +300,13 @@ int module_finalize(const Elf_Ehdr *hdr,
 		void *iseg = (void *)ibt_endbr->sh_addr;
 		apply_ibt_endbr(iseg, iseg + ibt_endbr->sh_size);
 	}
-	if (locks && text) {
+	if (locks) {
 		void *lseg = (void *)locks->sh_addr;
-		void *tseg = (void *)text->sh_addr;
+		void *text = me->core_layout.base;
+		void *text_end = text + me->core_layout.text_size;
 		alternatives_smp_module_add(me, me->name,
 					    lseg, lseg + locks->sh_size,
-					    tseg, tseg + text->sh_size);
+					    text, text_end);
 	}
 
 	if (orc && orc_ip)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 62671ccf0404..40d156a31676 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -600,7 +600,7 @@ static __always_inline void __speculation_ctrl_update(unsigned long tifp,
 	}
 
 	if (updmsr)
-		write_spec_ctrl_current(msr, false);
+		update_spec_ctrl_cond(msr);
 }
 
 static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk)
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 37c12fb92906..dfaa270a7cc9 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -44,16 +44,35 @@
 
 #include "tls.h"
 
-enum x86_regset {
-	REGSET_GENERAL,
-	REGSET_FP,
-	REGSET_XFP,
-	REGSET_IOPERM64 = REGSET_XFP,
-	REGSET_XSTATE,
-	REGSET_TLS,
-	REGSET_IOPERM32,
+enum x86_regset_32 {
+	REGSET32_GENERAL,
+	REGSET32_FP,
+	REGSET32_XFP,
+	REGSET32_XSTATE,
+	REGSET32_TLS,
+	REGSET32_IOPERM,
 };
 
+enum x86_regset_64 {
+	REGSET64_GENERAL,
+	REGSET64_FP,
+	REGSET64_IOPERM,
+	REGSET64_XSTATE,
+};
+
+#define REGSET_GENERAL \
+({ \
+	BUILD_BUG_ON((int)REGSET32_GENERAL != (int)REGSET64_GENERAL); \
+	REGSET32_GENERAL; \
+})
+
+#define REGSET_FP \
+({ \
+	BUILD_BUG_ON((int)REGSET32_FP != (int)REGSET64_FP); \
+	REGSET32_FP; \
+})
+
+
 struct pt_regs_offset {
 	const char *name;
 	int offset;
@@ -788,13 +807,13 @@ long arch_ptrace(struct task_struct *child, long request,
 #ifdef CONFIG_X86_32
 	case PTRACE_GETFPXREGS:	/* Get the child extended FPU state. */
 		return copy_regset_to_user(child, &user_x86_32_view,
-					   REGSET_XFP,
+					   REGSET32_XFP,
 					   0, sizeof(struct user_fxsr_struct),
 					   datap) ? -EIO : 0;
 
 	case PTRACE_SETFPXREGS:	/* Set the child extended FPU state. */
 		return copy_regset_from_user(child, &user_x86_32_view,
-					     REGSET_XFP,
+					     REGSET32_XFP,
 					     0, sizeof(struct user_fxsr_struct),
 					     datap) ? -EIO : 0;
 #endif
@@ -1086,13 +1105,13 @@ static long ia32_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 	case PTRACE_GETFPXREGS:	/* Get the child extended FPU state. */
 		return copy_regset_to_user(child, &user_x86_32_view,
-					   REGSET_XFP, 0,
+					   REGSET32_XFP, 0,
 					   sizeof(struct user32_fxsr_struct),
 					   datap);
 
 	case PTRACE_SETFPXREGS:	/* Set the child extended FPU state. */
 		return copy_regset_from_user(child, &user_x86_32_view,
-					     REGSET_XFP, 0,
+					     REGSET32_XFP, 0,
 					     sizeof(struct user32_fxsr_struct),
 					     datap);
 
@@ -1215,29 +1234,38 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 #ifdef CONFIG_X86_64
 
 static struct user_regset x86_64_regsets[] __ro_after_init = {
-	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS,
-		.n = sizeof(struct user_regs_struct) / sizeof(long),
-		.size = sizeof(long), .align = sizeof(long),
-		.regset_get = genregs_get, .set = genregs_set
+	[REGSET64_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= sizeof(struct user_regs_struct) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.regset_get	= genregs_get,
+		.set		= genregs_set
 	},
-	[REGSET_FP] = {
-		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct fxregs_state) / sizeof(long),
-		.size = sizeof(long), .align = sizeof(long),
-		.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
+	[REGSET64_FP] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct fxregs_state) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.active		= regset_xregset_fpregs_active,
+		.regset_get	= xfpregs_get,
+		.set		= xfpregs_set
 	},
-	[REGSET_XSTATE] = {
-		.core_note_type = NT_X86_XSTATE,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = xstateregs_active, .regset_get = xstateregs_get,
-		.set = xstateregs_set
+	[REGSET64_XSTATE] = {
+		.core_note_type	= NT_X86_XSTATE,
+		.size		= sizeof(u64),
+		.align		= sizeof(u64),
+		.active		= xstateregs_active,
+		.regset_get	= xstateregs_get,
+		.set		= xstateregs_set
 	},
-	[REGSET_IOPERM64] = {
-		.core_note_type = NT_386_IOPERM,
-		.n = IO_BITMAP_LONGS,
-		.size = sizeof(long), .align = sizeof(long),
-		.active = ioperm_active, .regset_get = ioperm_get
+	[REGSET64_IOPERM] = {
+		.core_note_type	= NT_386_IOPERM,
+		.n		= IO_BITMAP_LONGS,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.active		= ioperm_active,
+		.regset_get	= ioperm_get
 	},
 };
 
@@ -1256,43 +1284,57 @@ static const struct user_regset_view user_x86_64_view = {
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
 static struct user_regset x86_32_regsets[] __ro_after_init = {
-	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS,
-		.n = sizeof(struct user_regs_struct32) / sizeof(u32),
-		.size = sizeof(u32), .align = sizeof(u32),
-		.regset_get = genregs32_get, .set = genregs32_set
+	[REGSET32_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= sizeof(struct user_regs_struct32) / sizeof(u32),
+		.size		= sizeof(u32),
+		.align		= sizeof(u32),
+		.regset_get	= genregs32_get,
+		.set		= genregs32_set
 	},
-	[REGSET_FP] = {
-		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
-		.size = sizeof(u32), .align = sizeof(u32),
-		.active = regset_fpregs_active, .regset_get = fpregs_get, .set = fpregs_set
+	[REGSET32_FP] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_i387_ia32_struct) / sizeof(u32),
+		.size		= sizeof(u32),
+		.align		= sizeof(u32),
+		.active		= regset_fpregs_active,
+		.regset_get	= fpregs_get,
+		.set		= fpregs_set
 	},
-	[REGSET_XFP] = {
-		.core_note_type = NT_PRXFPREG,
-		.n = sizeof(struct fxregs_state) / sizeof(u32),
-		.size = sizeof(u32), .align = sizeof(u32),
-		.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
+	[REGSET32_XFP] = {
+		.core_note_type	= NT_PRXFPREG,
+		.n		= sizeof(struct fxregs_state) / sizeof(u32),
+		.size		= sizeof(u32),
+		.align		= sizeof(u32),
+		.active		= regset_xregset_fpregs_active,
+		.regset_get	= xfpregs_get,
+		.set		= xfpregs_set
 	},
-	[REGSET_XSTATE] = {
-		.core_note_type = NT_X86_XSTATE,
-		.size = sizeof(u64), .align = sizeof(u64),
-		.active = xstateregs_active, .regset_get = xstateregs_get,
-		.set = xstateregs_set
+	[REGSET32_XSTATE] = {
+		.core_note_type	= NT_X86_XSTATE,
+		.size		= sizeof(u64),
+		.align		= sizeof(u64),
+		.active		= xstateregs_active,
+		.regset_get	= xstateregs_get,
+		.set		= xstateregs_set
 	},
-	[REGSET_TLS] = {
-		.core_note_type = NT_386_TLS,
-		.n = GDT_ENTRY_TLS_ENTRIES, .bias = GDT_ENTRY_TLS_MIN,
-		.size = sizeof(struct user_desc),
-		.align = sizeof(struct user_desc),
-		.active = regset_tls_active,
-		.regset_get = regset_tls_get, .set = regset_tls_set
+	[REGSET32_TLS] = {
+		.core_note_type	= NT_386_TLS,
+		.n		= GDT_ENTRY_TLS_ENTRIES,
+		.bias		= GDT_ENTRY_TLS_MIN,
+		.size		= sizeof(struct user_desc),
+		.align		= sizeof(struct user_desc),
+		.active		= regset_tls_active,
+		.regset_get	= regset_tls_get,
+		.set		= regset_tls_set
 	},
-	[REGSET_IOPERM32] = {
-		.core_note_type = NT_386_IOPERM,
-		.n = IO_BITMAP_BYTES / sizeof(u32),
-		.size = sizeof(u32), .align = sizeof(u32),
-		.active = ioperm_active, .regset_get = ioperm_get
+	[REGSET32_IOPERM] = {
+		.core_note_type	= NT_386_IOPERM,
+		.n		= IO_BITMAP_BYTES / sizeof(u32),
+		.size		= sizeof(u32),
+		.align		= sizeof(u32),
+		.active		= ioperm_active,
+		.regset_get	= ioperm_get
 	},
 };
 
@@ -1311,10 +1353,10 @@ u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 void __init update_regset_xstate_info(unsigned int size, u64 xstate_mask)
 {
 #ifdef CONFIG_X86_64
-	x86_64_regsets[REGSET_XSTATE].n = size / sizeof(u64);
+	x86_64_regsets[REGSET64_XSTATE].n = size / sizeof(u64);
 #endif
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
-	x86_32_regsets[REGSET_XSTATE].n = size / sizeof(u64);
+	x86_32_regsets[REGSET32_XSTATE].n = size / sizeof(u64);
 #endif
 	xstate_fx_sw_bytes[USER_XSTATE_XCR0_WORD] = xstate_mask;
 }
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 9c7265b524c7..1504eb8d25aa 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -37,180 +37,27 @@
 #include <asm/sighandling.h>
 #include <asm/vm86.h>
 
-#ifdef CONFIG_X86_64
-#include <linux/compat.h>
-#include <asm/proto.h>
-#include <asm/ia32_unistd.h>
-#include <asm/fpu/xstate.h>
-#endif /* CONFIG_X86_64 */
-
 #include <asm/syscall.h>
 #include <asm/sigframe.h>
 #include <asm/signal.h>
 
-#ifdef CONFIG_X86_64
-/*
- * If regs->ss will cause an IRET fault, change it.  Otherwise leave it
- * alone.  Using this generally makes no sense unless
- * user_64bit_mode(regs) would return true.
- */
-static void force_valid_ss(struct pt_regs *regs)
+static inline int is_ia32_compat_frame(struct ksignal *ksig)
 {
-	u32 ar;
-	asm volatile ("lar %[old_ss], %[ar]\n\t"
-		      "jz 1f\n\t"		/* If invalid: */
-		      "xorl %[ar], %[ar]\n\t"	/* set ar = 0 */
-		      "1:"
-		      : [ar] "=r" (ar)
-		      : [old_ss] "rm" ((u16)regs->ss));
-
-	/*
-	 * For a valid 64-bit user context, we need DPL 3, type
-	 * read-write data or read-write exp-down data, and S and P
-	 * set.  We can't use VERW because VERW doesn't check the
-	 * P bit.
-	 */
-	ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK;
-	if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) &&
-	    ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN))
-		regs->ss = __USER_DS;
+	return IS_ENABLED(CONFIG_IA32_EMULATION) &&
+		ksig->ka.sa.sa_flags & SA_IA32_ABI;
 }
-# define CONTEXT_COPY_SIZE	offsetof(struct sigcontext, reserved1)
-#else
-# define CONTEXT_COPY_SIZE	sizeof(struct sigcontext)
-#endif
 
-static bool restore_sigcontext(struct pt_regs *regs,
-			       struct sigcontext __user *usc,
-			       unsigned long uc_flags)
+static inline int is_ia32_frame(struct ksignal *ksig)
 {
-	struct sigcontext sc;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	if (copy_from_user(&sc, usc, CONTEXT_COPY_SIZE))
-		return false;
-
-#ifdef CONFIG_X86_32
-	loadsegment(gs, sc.gs);
-	regs->fs = sc.fs;
-	regs->es = sc.es;
-	regs->ds = sc.ds;
-#endif /* CONFIG_X86_32 */
-
-	regs->bx = sc.bx;
-	regs->cx = sc.cx;
-	regs->dx = sc.dx;
-	regs->si = sc.si;
-	regs->di = sc.di;
-	regs->bp = sc.bp;
-	regs->ax = sc.ax;
-	regs->sp = sc.sp;
-	regs->ip = sc.ip;
-
-#ifdef CONFIG_X86_64
-	regs->r8 = sc.r8;
-	regs->r9 = sc.r9;
-	regs->r10 = sc.r10;
-	regs->r11 = sc.r11;
-	regs->r12 = sc.r12;
-	regs->r13 = sc.r13;
-	regs->r14 = sc.r14;
-	regs->r15 = sc.r15;
-#endif /* CONFIG_X86_64 */
-
-	/* Get CS/SS and force CPL3 */
-	regs->cs = sc.cs | 0x03;
-	regs->ss = sc.ss | 0x03;
-
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (sc.flags & FIX_EFLAGS);
-	/* disable syscall checks */
-	regs->orig_ax = -1;
-
-#ifdef CONFIG_X86_64
-	/*
-	 * Fix up SS if needed for the benefit of old DOSEMU and
-	 * CRIU.
-	 */
-	if (unlikely(!(uc_flags & UC_STRICT_RESTORE_SS) && user_64bit_mode(regs)))
-		force_valid_ss(regs);
-#endif
-
-	return fpu__restore_sig((void __user *)sc.fpstate,
-			       IS_ENABLED(CONFIG_X86_32));
+	return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame(ksig);
 }
 
-static __always_inline int
-__unsafe_setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
-		     struct pt_regs *regs, unsigned long mask)
+static inline int is_x32_frame(struct ksignal *ksig)
 {
-#ifdef CONFIG_X86_32
-	unsigned int gs;
-	savesegment(gs, gs);
-
-	unsafe_put_user(gs,	  (unsigned int __user *)&sc->gs, Efault);
-	unsafe_put_user(regs->fs, (unsigned int __user *)&sc->fs, Efault);
-	unsafe_put_user(regs->es, (unsigned int __user *)&sc->es, Efault);
-	unsafe_put_user(regs->ds, (unsigned int __user *)&sc->ds, Efault);
-#endif /* CONFIG_X86_32 */
-
-	unsafe_put_user(regs->di, &sc->di, Efault);
-	unsafe_put_user(regs->si, &sc->si, Efault);
-	unsafe_put_user(regs->bp, &sc->bp, Efault);
-	unsafe_put_user(regs->sp, &sc->sp, Efault);
-	unsafe_put_user(regs->bx, &sc->bx, Efault);
-	unsafe_put_user(regs->dx, &sc->dx, Efault);
-	unsafe_put_user(regs->cx, &sc->cx, Efault);
-	unsafe_put_user(regs->ax, &sc->ax, Efault);
-#ifdef CONFIG_X86_64
-	unsafe_put_user(regs->r8, &sc->r8, Efault);
-	unsafe_put_user(regs->r9, &sc->r9, Efault);
-	unsafe_put_user(regs->r10, &sc->r10, Efault);
-	unsafe_put_user(regs->r11, &sc->r11, Efault);
-	unsafe_put_user(regs->r12, &sc->r12, Efault);
-	unsafe_put_user(regs->r13, &sc->r13, Efault);
-	unsafe_put_user(regs->r14, &sc->r14, Efault);
-	unsafe_put_user(regs->r15, &sc->r15, Efault);
-#endif /* CONFIG_X86_64 */
-
-	unsafe_put_user(current->thread.trap_nr, &sc->trapno, Efault);
-	unsafe_put_user(current->thread.error_code, &sc->err, Efault);
-	unsafe_put_user(regs->ip, &sc->ip, Efault);
-#ifdef CONFIG_X86_32
-	unsafe_put_user(regs->cs, (unsigned int __user *)&sc->cs, Efault);
-	unsafe_put_user(regs->flags, &sc->flags, Efault);
-	unsafe_put_user(regs->sp, &sc->sp_at_signal, Efault);
-	unsafe_put_user(regs->ss, (unsigned int __user *)&sc->ss, Efault);
-#else /* !CONFIG_X86_32 */
-	unsafe_put_user(regs->flags, &sc->flags, Efault);
-	unsafe_put_user(regs->cs, &sc->cs, Efault);
-	unsafe_put_user(0, &sc->gs, Efault);
-	unsafe_put_user(0, &sc->fs, Efault);
-	unsafe_put_user(regs->ss, &sc->ss, Efault);
-#endif /* CONFIG_X86_32 */
-
-	unsafe_put_user(fpstate, (unsigned long __user *)&sc->fpstate, Efault);
-
-	/* non-iBCS2 extensions.. */
-	unsafe_put_user(mask, &sc->oldmask, Efault);
-	unsafe_put_user(current->thread.cr2, &sc->cr2, Efault);
-	return 0;
-Efault:
-	return -EFAULT;
+	return IS_ENABLED(CONFIG_X86_X32_ABI) &&
+		ksig->ka.sa.sa_flags & SA_X32_ABI;
 }
 
-#define unsafe_put_sigcontext(sc, fp, regs, set, label)			\
-do {									\
-	if (__unsafe_setup_sigcontext(sc, fp, regs, set->sig[0]))	\
-		goto label;						\
-} while(0);
-
-#define unsafe_put_sigmask(set, frame, label) \
-	unsafe_put_user(*(__u64 *)(set), \
-			(__u64 __user *)&(frame)->uc.uc_sigmask, \
-			label)
-
 /*
  * Set up a signal frame.
  */
@@ -223,24 +70,12 @@ do {									\
 /*
  * Determine which stack to use..
  */
-static unsigned long align_sigframe(unsigned long sp)
-{
-#ifdef CONFIG_X86_32
-	/*
-	 * Align the stack pointer according to the i386 ABI,
-	 * i.e. so that on function entry ((sp + 4) & 15) == 0.
-	 */
-	sp = ((sp + 4) & -FRAME_ALIGNMENT) - 4;
-#else /* !CONFIG_X86_32 */
-	sp = round_down(sp, FRAME_ALIGNMENT) - 8;
-#endif
-	return sp;
-}
-
-static void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
+void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size,
 	     void __user **fpstate)
 {
+	struct k_sigaction *ka = &ksig->ka;
+	int ia32_frame = is_ia32_frame(ksig);
 	/* Default to using normal stack */
 	bool nested_altstack = on_sig_stack(regs->sp);
 	bool entering_altstack = false;
@@ -249,7 +84,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	unsigned long buf_fx = 0;
 
 	/* redzone */
-	if (IS_ENABLED(CONFIG_X86_64))
+	if (!ia32_frame)
 		sp -= 128;
 
 	/* This is the X/Open sanctioned signal stack switching.  */
@@ -263,7 +98,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 			sp = current->sas_ss_sp + current->sas_ss_size;
 			entering_altstack = true;
 		}
-	} else if (IS_ENABLED(CONFIG_X86_32) &&
+	} else if (ia32_frame &&
 		   !nested_altstack &&
 		   regs->ss != __USER_DS &&
 		   !(ka->sa.sa_flags & SA_RESTORER) &&
@@ -273,11 +108,19 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 		entering_altstack = true;
 	}
 
-	sp = fpu__alloc_mathframe(sp, IS_ENABLED(CONFIG_X86_32),
-				  &buf_fx, &math_size);
+	sp = fpu__alloc_mathframe(sp, ia32_frame, &buf_fx, &math_size);
 	*fpstate = (void __user *)sp;
 
-	sp = align_sigframe(sp - frame_size);
+	sp -= frame_size;
+
+	if (ia32_frame)
+		/*
+		 * Align the stack pointer according to the i386 ABI,
+		 * i.e. so that on function entry ((sp + 4) & 15) == 0.
+		 */
+		sp = ((sp + 4) & -FRAME_ALIGNMENT) - 4;
+	else
+		sp = round_down(sp, FRAME_ALIGNMENT) - 8;
 
 	/*
 	 * If we are on the alternate signal stack and would overflow it, don't.
@@ -300,391 +143,6 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	return (void __user *)sp;
 }
 
-#ifdef CONFIG_X86_32
-static const struct {
-	u16 poplmovl;
-	u32 val;
-	u16 int80;
-} __attribute__((packed)) retcode = {
-	0xb858,		/* popl %eax; movl $..., %eax */
-	__NR_sigreturn,
-	0x80cd,		/* int $0x80 */
-};
-
-static const struct {
-	u8  movl;
-	u32 val;
-	u16 int80;
-	u8  pad;
-} __attribute__((packed)) rt_retcode = {
-	0xb8,		/* movl $..., %eax */
-	__NR_rt_sigreturn,
-	0x80cd,		/* int $0x80 */
-	0
-};
-
-static int
-__setup_frame(int sig, struct ksignal *ksig, sigset_t *set,
-	      struct pt_regs *regs)
-{
-	struct sigframe __user *frame;
-	void __user *restorer;
-	void __user *fp = NULL;
-
-	frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fp);
-
-	if (!user_access_begin(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	unsafe_put_user(sig, &frame->sig, Efault);
-	unsafe_put_sigcontext(&frame->sc, fp, regs, set, Efault);
-	unsafe_put_user(set->sig[1], &frame->extramask[0], Efault);
-	if (current->mm->context.vdso)
-		restorer = current->mm->context.vdso +
-			vdso_image_32.sym___kernel_sigreturn;
-	else
-		restorer = &frame->retcode;
-	if (ksig->ka.sa.sa_flags & SA_RESTORER)
-		restorer = ksig->ka.sa.sa_restorer;
-
-	/* Set up to return from userspace.  */
-	unsafe_put_user(restorer, &frame->pretcode, Efault);
-
-	/*
-	 * This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
-	 *
-	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
-	 * reasons and because gdb uses it as a signature to notice
-	 * signal handler stack frames.
-	 */
-	unsafe_put_user(*((u64 *)&retcode), (u64 *)frame->retcode, Efault);
-	user_access_end();
-
-	/* Set up registers for signal handler */
-	regs->sp = (unsigned long)frame;
-	regs->ip = (unsigned long)ksig->ka.sa.sa_handler;
-	regs->ax = (unsigned long)sig;
-	regs->dx = 0;
-	regs->cx = 0;
-
-	regs->ds = __USER_DS;
-	regs->es = __USER_DS;
-	regs->ss = __USER_DS;
-	regs->cs = __USER_CS;
-
-	return 0;
-
-Efault:
-	user_access_end();
-	return -EFAULT;
-}
-
-static int __setup_rt_frame(int sig, struct ksignal *ksig,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	void __user *restorer;
-	void __user *fp = NULL;
-
-	frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fp);
-
-	if (!user_access_begin(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	unsafe_put_user(sig, &frame->sig, Efault);
-	unsafe_put_user(&frame->info, &frame->pinfo, Efault);
-	unsafe_put_user(&frame->uc, &frame->puc, Efault);
-
-	/* Create the ucontext.  */
-	if (static_cpu_has(X86_FEATURE_XSAVE))
-		unsafe_put_user(UC_FP_XSTATE, &frame->uc.uc_flags, Efault);
-	else
-		unsafe_put_user(0, &frame->uc.uc_flags, Efault);
-	unsafe_put_user(0, &frame->uc.uc_link, Efault);
-	unsafe_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
-
-	/* Set up to return from userspace.  */
-	restorer = current->mm->context.vdso +
-		vdso_image_32.sym___kernel_rt_sigreturn;
-	if (ksig->ka.sa.sa_flags & SA_RESTORER)
-		restorer = ksig->ka.sa.sa_restorer;
-	unsafe_put_user(restorer, &frame->pretcode, Efault);
-
-	/*
-	 * This is movl $__NR_rt_sigreturn, %ax ; int $0x80
-	 *
-	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
-	 * reasons and because gdb uses it as a signature to notice
-	 * signal handler stack frames.
-	 */
-	unsafe_put_user(*((u64 *)&rt_retcode), (u64 *)frame->retcode, Efault);
-	unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault);
-	unsafe_put_sigmask(set, frame, Efault);
-	user_access_end();
-	
-	if (copy_siginfo_to_user(&frame->info, &ksig->info))
-		return -EFAULT;
-
-	/* Set up registers for signal handler */
-	regs->sp = (unsigned long)frame;
-	regs->ip = (unsigned long)ksig->ka.sa.sa_handler;
-	regs->ax = (unsigned long)sig;
-	regs->dx = (unsigned long)&frame->info;
-	regs->cx = (unsigned long)&frame->uc;
-
-	regs->ds = __USER_DS;
-	regs->es = __USER_DS;
-	regs->ss = __USER_DS;
-	regs->cs = __USER_CS;
-
-	return 0;
-Efault:
-	user_access_end();
-	return -EFAULT;
-}
-#else /* !CONFIG_X86_32 */
-static unsigned long frame_uc_flags(struct pt_regs *regs)
-{
-	unsigned long flags;
-
-	if (boot_cpu_has(X86_FEATURE_XSAVE))
-		flags = UC_FP_XSTATE | UC_SIGCONTEXT_SS;
-	else
-		flags = UC_SIGCONTEXT_SS;
-
-	if (likely(user_64bit_mode(regs)))
-		flags |= UC_STRICT_RESTORE_SS;
-
-	return flags;
-}
-
-static int __setup_rt_frame(int sig, struct ksignal *ksig,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	void __user *fp = NULL;
-	unsigned long uc_flags;
-
-	/* x86-64 should always use SA_RESTORER. */
-	if (!(ksig->ka.sa.sa_flags & SA_RESTORER))
-		return -EFAULT;
-
-	frame = get_sigframe(&ksig->ka, regs, sizeof(struct rt_sigframe), &fp);
-	uc_flags = frame_uc_flags(regs);
-
-	if (!user_access_begin(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	/* Create the ucontext.  */
-	unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault);
-	unsafe_put_user(0, &frame->uc.uc_link, Efault);
-	unsafe_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	unsafe_put_user(ksig->ka.sa.sa_restorer, &frame->pretcode, Efault);
-	unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault);
-	unsafe_put_sigmask(set, frame, Efault);
-	user_access_end();
-
-	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
-		if (copy_siginfo_to_user(&frame->info, &ksig->info))
-			return -EFAULT;
-	}
-
-	/* Set up registers for signal handler */
-	regs->di = sig;
-	/* In case the signal handler was declared without prototypes */
-	regs->ax = 0;
-
-	/* This also works for non SA_SIGINFO handlers because they expect the
-	   next argument after the signal number on the stack. */
-	regs->si = (unsigned long)&frame->info;
-	regs->dx = (unsigned long)&frame->uc;
-	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
-
-	regs->sp = (unsigned long)frame;
-
-	/*
-	 * Set up the CS and SS registers to run signal handlers in
-	 * 64-bit mode, even if the handler happens to be interrupting
-	 * 32-bit or 16-bit code.
-	 *
-	 * SS is subtle.  In 64-bit mode, we don't need any particular
-	 * SS descriptor, but we do need SS to be valid.  It's possible
-	 * that the old SS is entirely bogus -- this can happen if the
-	 * signal we're trying to deliver is #GP or #SS caused by a bad
-	 * SS value.  We also have a compatibility issue here: DOSEMU
-	 * relies on the contents of the SS register indicating the
-	 * SS value at the time of the signal, even though that code in
-	 * DOSEMU predates sigreturn's ability to restore SS.  (DOSEMU
-	 * avoids relying on sigreturn to restore SS; instead it uses
-	 * a trampoline.)  So we do our best: if the old SS was valid,
-	 * we keep it.  Otherwise we replace it.
-	 */
-	regs->cs = __USER_CS;
-
-	if (unlikely(regs->ss != __USER_DS))
-		force_valid_ss(regs);
-
-	return 0;
-
-Efault:
-	user_access_end();
-	return -EFAULT;
-}
-#endif /* CONFIG_X86_32 */
-
-#ifdef CONFIG_X86_X32_ABI
-static int x32_copy_siginfo_to_user(struct compat_siginfo __user *to,
-		const struct kernel_siginfo *from)
-{
-	struct compat_siginfo new;
-
-	copy_siginfo_to_external32(&new, from);
-	if (from->si_signo == SIGCHLD) {
-		new._sifields._sigchld_x32._utime = from->si_utime;
-		new._sifields._sigchld_x32._stime = from->si_stime;
-	}
-	if (copy_to_user(to, &new, sizeof(struct compat_siginfo)))
-		return -EFAULT;
-	return 0;
-}
-
-int copy_siginfo_to_user32(struct compat_siginfo __user *to,
-			   const struct kernel_siginfo *from)
-{
-	if (in_x32_syscall())
-		return x32_copy_siginfo_to_user(to, from);
-	return __copy_siginfo_to_user32(to, from);
-}
-#endif /* CONFIG_X86_X32_ABI */
-
-static int x32_setup_rt_frame(struct ksignal *ksig,
-			      compat_sigset_t *set,
-			      struct pt_regs *regs)
-{
-#ifdef CONFIG_X86_X32_ABI
-	struct rt_sigframe_x32 __user *frame;
-	unsigned long uc_flags;
-	void __user *restorer;
-	void __user *fp = NULL;
-
-	if (!(ksig->ka.sa.sa_flags & SA_RESTORER))
-		return -EFAULT;
-
-	frame = get_sigframe(&ksig->ka, regs, sizeof(*frame), &fp);
-
-	uc_flags = frame_uc_flags(regs);
-
-	if (!user_access_begin(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	/* Create the ucontext.  */
-	unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault);
-	unsafe_put_user(0, &frame->uc.uc_link, Efault);
-	unsafe_compat_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
-	unsafe_put_user(0, &frame->uc.uc__pad0, Efault);
-	restorer = ksig->ka.sa.sa_restorer;
-	unsafe_put_user(restorer, (unsigned long __user *)&frame->pretcode, Efault);
-	unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault);
-	unsafe_put_sigmask(set, frame, Efault);
-	user_access_end();
-
-	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
-		if (x32_copy_siginfo_to_user(&frame->info, &ksig->info))
-			return -EFAULT;
-	}
-
-	/* Set up registers for signal handler */
-	regs->sp = (unsigned long) frame;
-	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
-
-	/* We use the x32 calling convention here... */
-	regs->di = ksig->sig;
-	regs->si = (unsigned long) &frame->info;
-	regs->dx = (unsigned long) &frame->uc;
-
-	loadsegment(ds, __USER_DS);
-	loadsegment(es, __USER_DS);
-
-	regs->cs = __USER_CS;
-	regs->ss = __USER_DS;
-#endif	/* CONFIG_X86_X32_ABI */
-
-	return 0;
-#ifdef CONFIG_X86_X32_ABI
-Efault:
-	user_access_end();
-	return -EFAULT;
-#endif
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-#ifdef CONFIG_X86_32
-SYSCALL_DEFINE0(sigreturn)
-{
-	struct pt_regs *regs = current_pt_regs();
-	struct sigframe __user *frame;
-	sigset_t set;
-
-	frame = (struct sigframe __user *)(regs->sp - 8);
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.oldmask) ||
-	    __get_user(set.sig[1], &frame->extramask[0]))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	/*
-	 * x86_32 has no uc_flags bits relevant to restore_sigcontext.
-	 * Save a few cycles by skipping the __get_user.
-	 */
-	if (!restore_sigcontext(regs, &frame->sc, 0))
-		goto badframe;
-	return regs->ax;
-
-badframe:
-	signal_fault(regs, frame, "sigreturn");
-
-	return 0;
-}
-#endif /* CONFIG_X86_32 */
-
-SYSCALL_DEFINE0(rt_sigreturn)
-{
-	struct pt_regs *regs = current_pt_regs();
-	struct rt_sigframe __user *frame;
-	sigset_t set;
-	unsigned long uc_flags;
-
-	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(*(__u64 *)&set, (__u64 __user *)&frame->uc.uc_sigmask))
-		goto badframe;
-	if (__get_user(uc_flags, &frame->uc.uc_flags))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
-		goto badframe;
-
-	if (restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return regs->ax;
-
-badframe:
-	signal_fault(regs, frame, "rt_sigreturn");
-	return 0;
-}
-
 /*
  * There are four different struct types for signal frame: sigframe_ia32,
  * rt_sigframe_ia32, rt_sigframe_x32, and rt_sigframe. Use the worst case
@@ -743,43 +201,22 @@ unsigned long get_sigframe_size(void)
 	return max_frame_size;
 }
 
-static inline int is_ia32_compat_frame(struct ksignal *ksig)
-{
-	return IS_ENABLED(CONFIG_IA32_EMULATION) &&
-		ksig->ka.sa.sa_flags & SA_IA32_ABI;
-}
-
-static inline int is_ia32_frame(struct ksignal *ksig)
-{
-	return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame(ksig);
-}
-
-static inline int is_x32_frame(struct ksignal *ksig)
-{
-	return IS_ENABLED(CONFIG_X86_X32_ABI) &&
-		ksig->ka.sa.sa_flags & SA_X32_ABI;
-}
-
 static int
 setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
 {
-	int usig = ksig->sig;
-	sigset_t *set = sigmask_to_save();
-	compat_sigset_t *cset = (compat_sigset_t *) set;
-
 	/* Perform fixup for the pre-signal frame. */
 	rseq_signal_deliver(ksig, regs);
 
 	/* Set up the stack frame */
 	if (is_ia32_frame(ksig)) {
 		if (ksig->ka.sa.sa_flags & SA_SIGINFO)
-			return ia32_setup_rt_frame(usig, ksig, cset, regs);
+			return ia32_setup_rt_frame(ksig, regs);
 		else
-			return ia32_setup_frame(usig, ksig, cset, regs);
+			return ia32_setup_frame(ksig, regs);
 	} else if (is_x32_frame(ksig)) {
-		return x32_setup_rt_frame(ksig, cset, regs);
+		return x32_setup_rt_frame(ksig, regs);
 	} else {
-		return __setup_rt_frame(ksig->sig, ksig, set, regs);
+		return x64_setup_rt_frame(ksig, regs);
 	}
 }
 
@@ -969,36 +406,3 @@ bool sigaltstack_size_valid(size_t ss_size)
 	return true;
 }
 #endif /* CONFIG_DYNAMIC_SIGFRAME */
-
-#ifdef CONFIG_X86_X32_ABI
-COMPAT_SYSCALL_DEFINE0(x32_rt_sigreturn)
-{
-	struct pt_regs *regs = current_pt_regs();
-	struct rt_sigframe_x32 __user *frame;
-	sigset_t set;
-	unsigned long uc_flags;
-
-	frame = (struct rt_sigframe_x32 __user *)(regs->sp - 8);
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], (__u64 __user *)&frame->uc.uc_sigmask))
-		goto badframe;
-	if (__get_user(uc_flags, &frame->uc.uc_flags))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
-		goto badframe;
-
-	if (compat_restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return regs->ax;
-
-badframe:
-	signal_fault(regs, frame, "x32 rt_sigreturn");
-	return 0;
-}
-#endif
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/kernel/signal_32.c
index c9c3859322fa..2553136cf39b 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/kernel/signal_32.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *  linux/arch/x86_64/ia32/ia32_signal.c
- *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
  *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
@@ -26,7 +24,6 @@
 #include <linux/uaccess.h>
 #include <asm/fpu/signal.h>
 #include <asm/ptrace.h>
-#include <asm/ia32_unistd.h>
 #include <asm/user32.h>
 #include <uapi/asm/sigcontext.h>
 #include <asm/proto.h>
@@ -35,6 +32,9 @@
 #include <asm/sighandling.h>
 #include <asm/smap.h>
 
+#ifdef CONFIG_IA32_EMULATION
+#include <asm/ia32_unistd.h>
+
 static inline void reload_segments(struct sigcontext_32 *sc)
 {
 	unsigned int cur;
@@ -53,6 +53,21 @@ static inline void reload_segments(struct sigcontext_32 *sc)
 		loadsegment(es, sc->es | 0x03);
 }
 
+#define sigset32_t			compat_sigset_t
+#define restore_altstack32		compat_restore_altstack
+#define unsafe_save_altstack32		unsafe_compat_save_altstack
+
+#else
+
+#define sigset32_t			sigset_t
+#define __NR_ia32_sigreturn		__NR_sigreturn
+#define __NR_ia32_rt_sigreturn		__NR_rt_sigreturn
+#define restore_altstack32		restore_altstack
+#define unsafe_save_altstack32		unsafe_save_altstack
+#define __copy_siginfo_to_user32	copy_siginfo_to_user
+
+#endif
+
 /*
  * Do a signal return; undo the signal stack.
  */
@@ -86,6 +101,7 @@ static bool ia32_restore_sigcontext(struct pt_regs *regs,
 	/* disable syscall checks */
 	regs->orig_ax = -1;
 
+#ifdef CONFIG_IA32_EMULATION
 	/*
 	 * Reload fs and gs if they have changed in the signal
 	 * handler.  This does not handle long fs/gs base changes in
@@ -93,10 +109,17 @@ static bool ia32_restore_sigcontext(struct pt_regs *regs,
 	 * normal case.
 	 */
 	reload_segments(&sc);
+#else
+	loadsegment(gs, sc.gs);
+	regs->fs = sc.fs;
+	regs->es = sc.es;
+	regs->ds = sc.ds;
+#endif
+
 	return fpu__restore_sig(compat_ptr(sc.fpstate), 1);
 }
 
-COMPAT_SYSCALL_DEFINE0(sigreturn)
+SYSCALL32_DEFINE0(sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8);
@@ -119,7 +142,7 @@ badframe:
 	return 0;
 }
 
-COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
+SYSCALL32_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe_ia32 __user *frame;
@@ -129,7 +152,7 @@ COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
 
 	if (!access_ok(frame, sizeof(*frame)))
 		goto badframe;
-	if (__get_user(set.sig[0], (__u64 __user *)&frame->uc.uc_sigmask))
+	if (__get_user(*(__u64 *)&set, (__u64 __user *)&frame->uc.uc_sigmask))
 		goto badframe;
 
 	set_current_blocked(&set);
@@ -137,7 +160,7 @@ COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
 	if (!ia32_restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
-	if (compat_restore_altstack(&frame->uc.uc_stack))
+	if (restore_altstack32(&frame->uc.uc_stack))
 		goto badframe;
 
 	return regs->ax;
@@ -159,9 +182,15 @@ __unsafe_setup_sigcontext32(struct sigcontext_32 __user *sc,
 			    struct pt_regs *regs, unsigned int mask)
 {
 	unsafe_put_user(get_user_seg(gs), (unsigned int __user *)&sc->gs, Efault);
+#ifdef CONFIG_IA32_EMULATION
 	unsafe_put_user(get_user_seg(fs), (unsigned int __user *)&sc->fs, Efault);
 	unsafe_put_user(get_user_seg(ds), (unsigned int __user *)&sc->ds, Efault);
 	unsafe_put_user(get_user_seg(es), (unsigned int __user *)&sc->es, Efault);
+#else
+	unsafe_put_user(regs->fs, (unsigned int __user *)&sc->fs, Efault);
+	unsafe_put_user(regs->es, (unsigned int __user *)&sc->es, Efault);
+	unsafe_put_user(regs->ds, (unsigned int __user *)&sc->ds, Efault);
+#endif
 
 	unsafe_put_user(regs->di, &sc->di, Efault);
 	unsafe_put_user(regs->si, &sc->si, Efault);
@@ -196,43 +225,9 @@ do {									\
 		goto label;						\
 } while(0)
 
-/*
- * Determine which stack to use..
- */
-static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
-				 size_t frame_size,
-				 void __user **fpstate)
-{
-	unsigned long sp, fx_aligned, math_size;
-
-	/* Default to using normal stack */
-	sp = regs->sp;
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ksig->ka.sa.sa_flags & SA_ONSTACK)
-		sp = sigsp(sp, ksig);
-	/* This is the legacy signal stack switching. */
-	else if (regs->ss != __USER32_DS &&
-		!(ksig->ka.sa.sa_flags & SA_RESTORER) &&
-		 ksig->ka.sa.sa_restorer)
-		sp = (unsigned long) ksig->ka.sa.sa_restorer;
-
-	sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
-	*fpstate = (struct _fpstate_32 __user *) sp;
-	if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
-				      math_size))
-		return (void __user *) -1L;
-
-	sp -= frame_size;
-	/* Align the stack pointer according to the i386 ABI,
-	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
-	sp = ((sp + 4) & -16ul) - 4;
-	return (void __user *) sp;
-}
-
-int ia32_setup_frame(int sig, struct ksignal *ksig,
-		     compat_sigset_t *set, struct pt_regs *regs)
+int ia32_setup_frame(struct ksignal *ksig, struct pt_regs *regs)
 {
+	sigset32_t *set = (sigset32_t *) sigmask_to_save();
 	struct sigframe_ia32 __user *frame;
 	void __user *restorer;
 	void __user *fp = NULL;
@@ -264,7 +259,7 @@ int ia32_setup_frame(int sig, struct ksignal *ksig,
 	if (!user_access_begin(frame, sizeof(*frame)))
 		return -EFAULT;
 
-	unsafe_put_user(sig, &frame->sig, Efault);
+	unsafe_put_user(ksig->sig, &frame->sig, Efault);
 	unsafe_put_sigcontext32(&frame->sc, fp, regs, set, Efault);
 	unsafe_put_user(set->sig[1], &frame->extramask[0], Efault);
 	unsafe_put_user(ptr_to_compat(restorer), &frame->pretcode, Efault);
@@ -280,15 +275,20 @@ int ia32_setup_frame(int sig, struct ksignal *ksig,
 	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
 
 	/* Make -mregparm=3 work */
-	regs->ax = sig;
+	regs->ax = ksig->sig;
 	regs->dx = 0;
 	regs->cx = 0;
 
-	loadsegment(ds, __USER32_DS);
-	loadsegment(es, __USER32_DS);
+#ifdef CONFIG_IA32_EMULATION
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
+#else
+	regs->ds = __USER_DS;
+	regs->es = __USER_DS;
+#endif
 
 	regs->cs = __USER32_CS;
-	regs->ss = __USER32_DS;
+	regs->ss = __USER_DS;
 
 	return 0;
 Efault:
@@ -296,9 +296,9 @@ Efault:
 	return -EFAULT;
 }
 
-int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
-			compat_sigset_t *set, struct pt_regs *regs)
+int ia32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
 {
+	sigset32_t *set = (sigset32_t *) sigmask_to_save();
 	struct rt_sigframe_ia32 __user *frame;
 	void __user *restorer;
 	void __user *fp = NULL;
@@ -321,7 +321,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 	if (!user_access_begin(frame, sizeof(*frame)))
 		return -EFAULT;
 
-	unsafe_put_user(sig, &frame->sig, Efault);
+	unsafe_put_user(ksig->sig, &frame->sig, Efault);
 	unsafe_put_user(ptr_to_compat(&frame->info), &frame->pinfo, Efault);
 	unsafe_put_user(ptr_to_compat(&frame->uc), &frame->puc, Efault);
 
@@ -331,7 +331,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 	else
 		unsafe_put_user(0, &frame->uc.uc_flags, Efault);
 	unsafe_put_user(0, &frame->uc.uc_link, Efault);
-	unsafe_compat_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
+	unsafe_save_altstack32(&frame->uc.uc_stack, regs->sp, Efault);
 
 	if (ksig->ka.sa.sa_flags & SA_RESTORER)
 		restorer = ksig->ka.sa.sa_restorer;
@@ -357,15 +357,20 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
 
 	/* Make -mregparm=3 work */
-	regs->ax = sig;
+	regs->ax = ksig->sig;
 	regs->dx = (unsigned long) &frame->info;
 	regs->cx = (unsigned long) &frame->uc;
 
-	loadsegment(ds, __USER32_DS);
-	loadsegment(es, __USER32_DS);
+#ifdef CONFIG_IA32_EMULATION
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
+#else
+	regs->ds = __USER_DS;
+	regs->es = __USER_DS;
+#endif
 
 	regs->cs = __USER32_CS;
-	regs->ss = __USER32_DS;
+	regs->ss = __USER_DS;
 
 	return 0;
 Efault:
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
new file mode 100644
index 000000000000..ff9c55064223
--- /dev/null
+++ b/arch/x86/kernel/signal_64.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+
+#include <asm/ucontext.h>
+#include <asm/fpu/signal.h>
+#include <asm/sighandling.h>
+
+#include <asm/syscall.h>
+#include <asm/sigframe.h>
+#include <asm/signal.h>
+
+/*
+ * If regs->ss will cause an IRET fault, change it.  Otherwise leave it
+ * alone.  Using this generally makes no sense unless
+ * user_64bit_mode(regs) would return true.
+ */
+static void force_valid_ss(struct pt_regs *regs)
+{
+	u32 ar;
+	asm volatile ("lar %[old_ss], %[ar]\n\t"
+		      "jz 1f\n\t"		/* If invalid: */
+		      "xorl %[ar], %[ar]\n\t"	/* set ar = 0 */
+		      "1:"
+		      : [ar] "=r" (ar)
+		      : [old_ss] "rm" ((u16)regs->ss));
+
+	/*
+	 * For a valid 64-bit user context, we need DPL 3, type
+	 * read-write data or read-write exp-down data, and S and P
+	 * set.  We can't use VERW because VERW doesn't check the
+	 * P bit.
+	 */
+	ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK;
+	if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) &&
+	    ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN))
+		regs->ss = __USER_DS;
+}
+
+static bool restore_sigcontext(struct pt_regs *regs,
+			       struct sigcontext __user *usc,
+			       unsigned long uc_flags)
+{
+	struct sigcontext sc;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (copy_from_user(&sc, usc, offsetof(struct sigcontext, reserved1)))
+		return false;
+
+	regs->bx = sc.bx;
+	regs->cx = sc.cx;
+	regs->dx = sc.dx;
+	regs->si = sc.si;
+	regs->di = sc.di;
+	regs->bp = sc.bp;
+	regs->ax = sc.ax;
+	regs->sp = sc.sp;
+	regs->ip = sc.ip;
+	regs->r8 = sc.r8;
+	regs->r9 = sc.r9;
+	regs->r10 = sc.r10;
+	regs->r11 = sc.r11;
+	regs->r12 = sc.r12;
+	regs->r13 = sc.r13;
+	regs->r14 = sc.r14;
+	regs->r15 = sc.r15;
+
+	/* Get CS/SS and force CPL3 */
+	regs->cs = sc.cs | 0x03;
+	regs->ss = sc.ss | 0x03;
+
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (sc.flags & FIX_EFLAGS);
+	/* disable syscall checks */
+	regs->orig_ax = -1;
+
+	/*
+	 * Fix up SS if needed for the benefit of old DOSEMU and
+	 * CRIU.
+	 */
+	if (unlikely(!(uc_flags & UC_STRICT_RESTORE_SS) && user_64bit_mode(regs)))
+		force_valid_ss(regs);
+
+	return fpu__restore_sig((void __user *)sc.fpstate, 0);
+}
+
+static __always_inline int
+__unsafe_setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
+		     struct pt_regs *regs, unsigned long mask)
+{
+	unsafe_put_user(regs->di, &sc->di, Efault);
+	unsafe_put_user(regs->si, &sc->si, Efault);
+	unsafe_put_user(regs->bp, &sc->bp, Efault);
+	unsafe_put_user(regs->sp, &sc->sp, Efault);
+	unsafe_put_user(regs->bx, &sc->bx, Efault);
+	unsafe_put_user(regs->dx, &sc->dx, Efault);
+	unsafe_put_user(regs->cx, &sc->cx, Efault);
+	unsafe_put_user(regs->ax, &sc->ax, Efault);
+	unsafe_put_user(regs->r8, &sc->r8, Efault);
+	unsafe_put_user(regs->r9, &sc->r9, Efault);
+	unsafe_put_user(regs->r10, &sc->r10, Efault);
+	unsafe_put_user(regs->r11, &sc->r11, Efault);
+	unsafe_put_user(regs->r12, &sc->r12, Efault);
+	unsafe_put_user(regs->r13, &sc->r13, Efault);
+	unsafe_put_user(regs->r14, &sc->r14, Efault);
+	unsafe_put_user(regs->r15, &sc->r15, Efault);
+
+	unsafe_put_user(current->thread.trap_nr, &sc->trapno, Efault);
+	unsafe_put_user(current->thread.error_code, &sc->err, Efault);
+	unsafe_put_user(regs->ip, &sc->ip, Efault);
+	unsafe_put_user(regs->flags, &sc->flags, Efault);
+	unsafe_put_user(regs->cs, &sc->cs, Efault);
+	unsafe_put_user(0, &sc->gs, Efault);
+	unsafe_put_user(0, &sc->fs, Efault);
+	unsafe_put_user(regs->ss, &sc->ss, Efault);
+
+	unsafe_put_user(fpstate, (unsigned long __user *)&sc->fpstate, Efault);
+
+	/* non-iBCS2 extensions.. */
+	unsafe_put_user(mask, &sc->oldmask, Efault);
+	unsafe_put_user(current->thread.cr2, &sc->cr2, Efault);
+	return 0;
+Efault:
+	return -EFAULT;
+}
+
+#define unsafe_put_sigcontext(sc, fp, regs, set, label)			\
+do {									\
+	if (__unsafe_setup_sigcontext(sc, fp, regs, set->sig[0]))	\
+		goto label;						\
+} while(0);
+
+#define unsafe_put_sigmask(set, frame, label) \
+	unsafe_put_user(*(__u64 *)(set), \
+			(__u64 __user *)&(frame)->uc.uc_sigmask, \
+			label)
+
+static unsigned long frame_uc_flags(struct pt_regs *regs)
+{
+	unsigned long flags;
+
+	if (boot_cpu_has(X86_FEATURE_XSAVE))
+		flags = UC_FP_XSTATE | UC_SIGCONTEXT_SS;
+	else
+		flags = UC_SIGCONTEXT_SS;
+
+	if (likely(user_64bit_mode(regs)))
+		flags |= UC_STRICT_RESTORE_SS;
+
+	return flags;
+}
+
+int x64_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *set = sigmask_to_save();
+	struct rt_sigframe __user *frame;
+	void __user *fp = NULL;
+	unsigned long uc_flags;
+
+	/* x86-64 should always use SA_RESTORER. */
+	if (!(ksig->ka.sa.sa_flags & SA_RESTORER))
+		return -EFAULT;
+
+	frame = get_sigframe(ksig, regs, sizeof(struct rt_sigframe), &fp);
+	uc_flags = frame_uc_flags(regs);
+
+	if (!user_access_begin(frame, sizeof(*frame)))
+		return -EFAULT;
+
+	/* Create the ucontext.  */
+	unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault);
+	unsafe_put_user(0, &frame->uc.uc_link, Efault);
+	unsafe_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	unsafe_put_user(ksig->ka.sa.sa_restorer, &frame->pretcode, Efault);
+	unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault);
+	unsafe_put_sigmask(set, frame, Efault);
+	user_access_end();
+
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
+		if (copy_siginfo_to_user(&frame->info, &ksig->info))
+			return -EFAULT;
+	}
+
+	/* Set up registers for signal handler */
+	regs->di = ksig->sig;
+	/* In case the signal handler was declared without prototypes */
+	regs->ax = 0;
+
+	/* This also works for non SA_SIGINFO handlers because they expect the
+	   next argument after the signal number on the stack. */
+	regs->si = (unsigned long)&frame->info;
+	regs->dx = (unsigned long)&frame->uc;
+	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
+
+	regs->sp = (unsigned long)frame;
+
+	/*
+	 * Set up the CS and SS registers to run signal handlers in
+	 * 64-bit mode, even if the handler happens to be interrupting
+	 * 32-bit or 16-bit code.
+	 *
+	 * SS is subtle.  In 64-bit mode, we don't need any particular
+	 * SS descriptor, but we do need SS to be valid.  It's possible
+	 * that the old SS is entirely bogus -- this can happen if the
+	 * signal we're trying to deliver is #GP or #SS caused by a bad
+	 * SS value.  We also have a compatibility issue here: DOSEMU
+	 * relies on the contents of the SS register indicating the
+	 * SS value at the time of the signal, even though that code in
+	 * DOSEMU predates sigreturn's ability to restore SS.  (DOSEMU
+	 * avoids relying on sigreturn to restore SS; instead it uses
+	 * a trampoline.)  So we do our best: if the old SS was valid,
+	 * we keep it.  Otherwise we replace it.
+	 */
+	regs->cs = __USER_CS;
+
+	if (unlikely(regs->ss != __USER_DS))
+		force_valid_ss(regs);
+
+	return 0;
+
+Efault:
+	user_access_end();
+	return -EFAULT;
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+SYSCALL_DEFINE0(rt_sigreturn)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+	unsigned long uc_flags;
+
+	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
+	if (!access_ok(frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(*(__u64 *)&set, (__u64 __user *)&frame->uc.uc_sigmask))
+		goto badframe;
+	if (__get_user(uc_flags, &frame->uc.uc_flags))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return regs->ax;
+
+badframe:
+	signal_fault(regs, frame, "rt_sigreturn");
+	return 0;
+}
+
+#ifdef CONFIG_X86_X32_ABI
+static int x32_copy_siginfo_to_user(struct compat_siginfo __user *to,
+		const struct kernel_siginfo *from)
+{
+	struct compat_siginfo new;
+
+	copy_siginfo_to_external32(&new, from);
+	if (from->si_signo == SIGCHLD) {
+		new._sifields._sigchld_x32._utime = from->si_utime;
+		new._sifields._sigchld_x32._stime = from->si_stime;
+	}
+	if (copy_to_user(to, &new, sizeof(struct compat_siginfo)))
+		return -EFAULT;
+	return 0;
+}
+
+int copy_siginfo_to_user32(struct compat_siginfo __user *to,
+			   const struct kernel_siginfo *from)
+{
+	if (in_x32_syscall())
+		return x32_copy_siginfo_to_user(to, from);
+	return __copy_siginfo_to_user32(to, from);
+}
+
+int x32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
+{
+	compat_sigset_t *set = (compat_sigset_t *) sigmask_to_save();
+	struct rt_sigframe_x32 __user *frame;
+	unsigned long uc_flags;
+	void __user *restorer;
+	void __user *fp = NULL;
+
+	if (!(ksig->ka.sa.sa_flags & SA_RESTORER))
+		return -EFAULT;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame), &fp);
+
+	uc_flags = frame_uc_flags(regs);
+
+	if (!user_access_begin(frame, sizeof(*frame)))
+		return -EFAULT;
+
+	/* Create the ucontext.  */
+	unsafe_put_user(uc_flags, &frame->uc.uc_flags, Efault);
+	unsafe_put_user(0, &frame->uc.uc_link, Efault);
+	unsafe_compat_save_altstack(&frame->uc.uc_stack, regs->sp, Efault);
+	unsafe_put_user(0, &frame->uc.uc__pad0, Efault);
+	restorer = ksig->ka.sa.sa_restorer;
+	unsafe_put_user(restorer, (unsigned long __user *)&frame->pretcode, Efault);
+	unsafe_put_sigcontext(&frame->uc.uc_mcontext, fp, regs, set, Efault);
+	unsafe_put_sigmask(set, frame, Efault);
+	user_access_end();
+
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
+		if (x32_copy_siginfo_to_user(&frame->info, &ksig->info))
+			return -EFAULT;
+	}
+
+	/* Set up registers for signal handler */
+	regs->sp = (unsigned long) frame;
+	regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
+
+	/* We use the x32 calling convention here... */
+	regs->di = ksig->sig;
+	regs->si = (unsigned long) &frame->info;
+	regs->dx = (unsigned long) &frame->uc;
+
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
+
+	regs->cs = __USER_CS;
+	regs->ss = __USER_DS;
+
+	return 0;
+
+Efault:
+	user_access_end();
+	return -EFAULT;
+}
+
+COMPAT_SYSCALL_DEFINE0(x32_rt_sigreturn)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct rt_sigframe_x32 __user *frame;
+	sigset_t set;
+	unsigned long uc_flags;
+
+	frame = (struct rt_sigframe_x32 __user *)(regs->sp - 8);
+
+	if (!access_ok(frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(set.sig[0], (__u64 __user *)&frame->uc.uc_sigmask))
+		goto badframe;
+	if (__get_user(uc_flags, &frame->uc.uc_flags))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
+		goto badframe;
+
+	if (compat_restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return regs->ax;
+
+badframe:
+	signal_fault(regs, frame, "x32 rt_sigreturn");
+	return 0;
+}
+#endif /* CONFIG_X86_X32_ABI */
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d3fdec706f1d..d1e1679f32cf 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -68,13 +68,13 @@
 
 #ifdef CONFIG_X86_64
 #include <asm/x86_init.h>
-#include <asm/proto.h>
 #else
 #include <asm/processor-flags.h>
 #include <asm/setup.h>
-#include <asm/proto.h>
 #endif
 
+#include <asm/proto.h>
+
 DECLARE_BITMAP(system_vectors, NR_VECTORS);
 
 static inline void cond_local_irq_enable(struct pt_regs *regs)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index cafacb2e58cc..a78e73da4a74 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -51,7 +51,7 @@ int tsc_clocksource_reliable;
 static u32 art_to_tsc_numerator;
 static u32 art_to_tsc_denominator;
 static u64 art_to_tsc_offset;
-struct clocksource *art_related_clocksource;
+static struct clocksource *art_related_clocksource;
 
 struct cyc2ns {
 	struct cyc2ns_data data[2];	/*  0 + 2*16 = 32 */
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index b63cf8f7745e..6c07f6daaa22 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -722,8 +722,9 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 	switch (opc1) {
 	case 0xeb:	/* jmp 8 */
 	case 0xe9:	/* jmp 32 */
-	case 0x90:	/* prefix* + nop; same as jmp with .offs = 0 */
 		break;
+	case 0x90:	/* prefix* + nop; same as jmp with .offs = 0 */
+		goto setup;
 
 	case 0xe8:	/* call relative */
 		branch_clear_offset(auprobe, insn);
@@ -753,6 +754,7 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 			return -ENOTSUPP;
 	}
 
+setup:
 	auprobe->branch.opc1 = opc1;
 	auprobe->branch.ilen = insn->length;
 	auprobe->branch.offs = insn->immediate.value;
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 62bc7a01cecc..c92c49a0b35b 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -665,7 +665,7 @@ void kvm_set_cpu_caps(void)
 	);
 
 	kvm_cpu_cap_init_scattered(CPUID_12_EAX,
-		SF(SGX1) | SF(SGX2)
+		SF(SGX1) | SF(SGX2) | SF(SGX_EDECCSSA)
 	);
 
 	kvm_cpu_cap_mask(CPUID_8000_0001_ECX,
@@ -1047,9 +1047,7 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 		 * userspace.  ATTRIBUTES.XFRM is not adjusted as userspace is
 		 * expected to derive it from supported XCR0.
 		 */
-		entry->eax &= SGX_ATTR_DEBUG | SGX_ATTR_MODE64BIT |
-			      SGX_ATTR_PROVISIONKEY | SGX_ATTR_EINITTOKENKEY |
-			      SGX_ATTR_KSS;
+		entry->eax &= SGX_ATTR_PRIV_MASK | SGX_ATTR_UNPRIV_MASK;
 		entry->ebx &= 0;
 		break;
 	/* Intel PT */
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 1ccb769f62af..b6f96d47e596 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -2443,6 +2443,7 @@ static bool __kvm_mmu_prepare_zap_page(struct kvm *kvm,
 {
 	bool list_unstable, zapped_root = false;
 
+	lockdep_assert_held_write(&kvm->mmu_lock);
 	trace_kvm_mmu_prepare_zap_page(sp);
 	++kvm->stat.mmu_shadow_zapped;
 	*nr_zapped = mmu_zap_unsync_children(kvm, sp, invalid_list);
@@ -4262,14 +4263,14 @@ static int direct_page_fault(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault
 	if (is_page_fault_stale(vcpu, fault, mmu_seq))
 		goto out_unlock;
 
-	r = make_mmu_pages_available(vcpu);
-	if (r)
-		goto out_unlock;
-
-	if (is_tdp_mmu_fault)
+	if (is_tdp_mmu_fault) {
 		r = kvm_tdp_mmu_map(vcpu, fault);
-	else
+	} else {
+		r = make_mmu_pages_available(vcpu);
+		if (r)
+			goto out_unlock;
 		r = __direct_map(vcpu, fault);
+	}
 
 out_unlock:
 	if (is_tdp_mmu_fault)
diff --git a/arch/x86/kvm/reverse_cpuid.h b/arch/x86/kvm/reverse_cpuid.h
index a19d473d0184..4e5b8444f161 100644
--- a/arch/x86/kvm/reverse_cpuid.h
+++ b/arch/x86/kvm/reverse_cpuid.h
@@ -23,6 +23,7 @@ enum kvm_only_cpuid_leafs {
 /* Intel-defined SGX sub-features, CPUID level 0x12 (EAX). */
 #define KVM_X86_FEATURE_SGX1		KVM_X86_FEATURE(CPUID_12_EAX, 0)
 #define KVM_X86_FEATURE_SGX2		KVM_X86_FEATURE(CPUID_12_EAX, 1)
+#define KVM_X86_FEATURE_SGX_EDECCSSA	KVM_X86_FEATURE(CPUID_12_EAX, 11)
 
 struct cpuid_reg {
 	u32 function;
@@ -78,6 +79,8 @@ static __always_inline u32 __feature_translate(int x86_feature)
 		return KVM_X86_FEATURE_SGX1;
 	else if (x86_feature == X86_FEATURE_SGX2)
 		return KVM_X86_FEATURE_SGX2;
+	else if (x86_feature == X86_FEATURE_SGX_EDECCSSA)
+		return KVM_X86_FEATURE_SGX_EDECCSSA;
 
 	return x86_feature;
 }
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 4c620999d230..995bc0f90759 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -1091,6 +1091,12 @@ int nested_svm_vmexit(struct vcpu_svm *svm)
 
 static void nested_svm_triple_fault(struct kvm_vcpu *vcpu)
 {
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	if (!vmcb12_is_intercept(&svm->nested.ctl, INTERCEPT_SHUTDOWN))
+		return;
+
+	kvm_clear_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 	nested_svm_simple_vmexit(to_svm(vcpu), SVM_EXIT_SHUTDOWN);
 }
 
@@ -1125,6 +1131,9 @@ void svm_free_nested(struct vcpu_svm *svm)
 	if (!svm->nested.initialized)
 		return;
 
+	if (WARN_ON_ONCE(svm->vmcb != svm->vmcb01.ptr))
+		svm_switch_vmcb(svm, &svm->vmcb01);
+
 	svm_vcpu_free_msrpm(svm->nested.msrpm);
 	svm->nested.msrpm = NULL;
 
@@ -1143,9 +1152,6 @@ void svm_free_nested(struct vcpu_svm *svm)
 	svm->nested.initialized = false;
 }
 
-/*
- * Forcibly leave nested mode in order to be able to reset the VCPU later on.
- */
 void svm_leave_nested(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 9f88c8e6766e..ce362e88a567 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -346,12 +346,6 @@ int svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 	return 0;
 }
 
-static int is_external_interrupt(u32 info)
-{
-	info &= SVM_EVTINJ_TYPE_MASK | SVM_EVTINJ_VALID;
-	return info == (SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR);
-}
-
 static u32 svm_get_interrupt_shadow(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1438,6 +1432,7 @@ static void svm_vcpu_free(struct kvm_vcpu *vcpu)
 	 */
 	svm_clear_current_vmcb(svm->vmcb);
 
+	svm_leave_nested(vcpu);
 	svm_free_nested(svm);
 
 	sev_free_vcpu(vcpu);
@@ -2709,9 +2704,9 @@ static int svm_get_msr_feature(struct kvm_msr_entry *msr)
 	msr->data = 0;
 
 	switch (msr->index) {
-	case MSR_F10H_DECFG:
-		if (boot_cpu_has(X86_FEATURE_LFENCE_RDTSC))
-			msr->data |= MSR_F10H_DECFG_LFENCE_SERIALIZE;
+	case MSR_AMD64_DE_CFG:
+		if (cpu_feature_enabled(X86_FEATURE_LFENCE_RDTSC))
+			msr->data |= MSR_AMD64_DE_CFG_LFENCE_SERIALIZE;
 		break;
 	case MSR_IA32_PERF_CAPABILITIES:
 		return 0;
@@ -2812,7 +2807,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			msr_info->data = 0x1E;
 		}
 		break;
-	case MSR_F10H_DECFG:
+	case MSR_AMD64_DE_CFG:
 		msr_info->data = svm->msr_decfg;
 		break;
 	default:
@@ -3041,7 +3036,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	case MSR_VM_IGNNE:
 		vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
-	case MSR_F10H_DECFG: {
+	case MSR_AMD64_DE_CFG: {
 		struct kvm_msr_entry msr_entry;
 
 		msr_entry.index = msr->index;
@@ -3425,15 +3420,6 @@ static int svm_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
 		return 0;
 	}
 
-	if (is_external_interrupt(svm->vmcb->control.exit_int_info) &&
-	    exit_code != SVM_EXIT_EXCP_BASE + PF_VECTOR &&
-	    exit_code != SVM_EXIT_NPF && exit_code != SVM_EXIT_TASK_SWITCH &&
-	    exit_code != SVM_EXIT_INTR && exit_code != SVM_EXIT_NMI)
-		printk(KERN_ERR "%s: unexpected exit_int_info 0x%x "
-		       "exit_code 0x%x\n",
-		       __func__, svm->vmcb->control.exit_int_info,
-		       exit_code);
-
 	if (exit_fastpath != EXIT_FASTPATH_NONE)
 		return 1;
 
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 0c62352dda6a..5b0d4859e4b7 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -4854,6 +4854,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 
 static void nested_vmx_triple_fault(struct kvm_vcpu *vcpu)
 {
+	kvm_clear_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 	nested_vmx_vmexit(vcpu, EXIT_REASON_TRIPLE_FAULT, 0, 0);
 }
 
@@ -6440,9 +6441,6 @@ out:
 	return kvm_state.size;
 }
 
-/*
- * Forcibly leave nested mode in order to be able to reset the VCPU later on.
- */
 void vmx_leave_nested(struct kvm_vcpu *vcpu)
 {
 	if (is_guest_mode(vcpu)) {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ecea83f0da49..69227f77b201 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -628,6 +628,12 @@ static void kvm_queue_exception_vmexit(struct kvm_vcpu *vcpu, unsigned int vecto
 	ex->payload = payload;
 }
 
+/* Forcibly leave the nested mode in cases like a vCPU reset */
+static void kvm_leave_nested(struct kvm_vcpu *vcpu)
+{
+	kvm_x86_ops.nested_ops->leave_nested(vcpu);
+}
+
 static void kvm_multiple_exception(struct kvm_vcpu *vcpu,
 		unsigned nr, bool has_error, u32 error_code,
 	        bool has_payload, unsigned long payload, bool reinject)
@@ -1557,7 +1563,7 @@ static const u32 msr_based_features_all[] = {
 	MSR_IA32_VMX_EPT_VPID_CAP,
 	MSR_IA32_VMX_VMFUNC,
 
-	MSR_F10H_DECFG,
+	MSR_AMD64_DE_CFG,
 	MSR_IA32_UCODE_REV,
 	MSR_IA32_ARCH_CAPABILITIES,
 	MSR_IA32_PERF_CAPABILITIES,
@@ -5195,7 +5201,7 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 
 	if (events->flags & KVM_VCPUEVENT_VALID_SMM) {
 		if (!!(vcpu->arch.hflags & HF_SMM_MASK) != events->smi.smm) {
-			kvm_x86_ops.nested_ops->leave_nested(vcpu);
+			kvm_leave_nested(vcpu);
 			kvm_smm_changed(vcpu, events->smi.smm);
 		}
 
@@ -9805,7 +9811,7 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 
 int kvm_check_nested_events(struct kvm_vcpu *vcpu)
 {
-	if (kvm_check_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
+	if (kvm_test_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
 		kvm_x86_ops.nested_ops->triple_fault(vcpu);
 		return 1;
 	}
@@ -10560,10 +10566,11 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			r = 0;
 			goto out;
 		}
-		if (kvm_check_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
-			if (is_guest_mode(vcpu)) {
+		if (kvm_test_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
+			if (is_guest_mode(vcpu))
 				kvm_x86_ops.nested_ops->triple_fault(vcpu);
-			} else {
+
+			if (kvm_check_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
 				vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 				vcpu->mmio_needed = 0;
 				r = 0;
@@ -11997,8 +12004,18 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	WARN_ON_ONCE(!init_event &&
 		     (old_cr0 || kvm_read_cr3(vcpu) || kvm_read_cr4(vcpu)));
 
+	/*
+	 * SVM doesn't unconditionally VM-Exit on INIT and SHUTDOWN, thus it's
+	 * possible to INIT the vCPU while L2 is active.  Force the vCPU back
+	 * into L1 as EFER.SVME is cleared on INIT (along with all other EFER
+	 * bits), i.e. virtualization is disabled.
+	 */
+	if (is_guest_mode(vcpu))
+		kvm_leave_nested(vcpu);
+
 	kvm_lapic_reset(vcpu, init_event);
 
+	WARN_ON_ONCE(is_guest_mode(vcpu) || is_smm(vcpu));
 	vcpu->arch.hflags = 0;
 
 	vcpu->arch.smi_pending = 0;
diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index 2dae413bd62a..f3098c0e386a 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -954,6 +954,14 @@ static int kvm_xen_hypercall_complete_userspace(struct kvm_vcpu *vcpu)
 	return kvm_xen_hypercall_set_result(vcpu, run->xen.u.hcall.result);
 }
 
+static inline int max_evtchn_port(struct kvm *kvm)
+{
+	if (IS_ENABLED(CONFIG_64BIT) && kvm->arch.xen.long_mode)
+		return EVTCHN_2L_NR_CHANNELS;
+	else
+		return COMPAT_EVTCHN_2L_NR_CHANNELS;
+}
+
 static bool wait_pending_event(struct kvm_vcpu *vcpu, int nr_ports,
 			       evtchn_port_t *ports)
 {
@@ -1042,6 +1050,10 @@ static bool kvm_xen_schedop_poll(struct kvm_vcpu *vcpu, bool longmode,
 			*r = -EFAULT;
 			goto out;
 		}
+		if (ports[i] >= max_evtchn_port(vcpu->kvm)) {
+			*r = -EINVAL;
+			goto out;
+		}
 	}
 
 	if (sched_poll.nr_ports == 1)
@@ -1215,6 +1227,7 @@ int kvm_xen_hypercall(struct kvm_vcpu *vcpu)
 	bool longmode;
 	u64 input, params[6], r = -ENOSYS;
 	bool handled = false;
+	u8 cpl;
 
 	input = (u64)kvm_register_read(vcpu, VCPU_REGS_RAX);
 
@@ -1242,9 +1255,17 @@ int kvm_xen_hypercall(struct kvm_vcpu *vcpu)
 		params[5] = (u64)kvm_r9_read(vcpu);
 	}
 #endif
+	cpl = static_call(kvm_x86_get_cpl)(vcpu);
 	trace_kvm_xen_hypercall(input, params[0], params[1], params[2],
 				params[3], params[4], params[5]);
 
+	/*
+	 * Only allow hypercall acceleration for CPL0. The rare hypercalls that
+	 * are permitted in guest userspace can be handled by the VMM.
+	 */
+	if (unlikely(cpl > 0))
+		goto handle_in_userspace;
+
 	switch (input) {
 	case __HYPERVISOR_xen_version:
 		if (params[0] == XENVER_version && vcpu->kvm->arch.xen.xen_version) {
@@ -1279,10 +1300,11 @@ int kvm_xen_hypercall(struct kvm_vcpu *vcpu)
 	if (handled)
 		return kvm_xen_hypercall_set_result(vcpu, r);
 
+handle_in_userspace:
 	vcpu->run->exit_reason = KVM_EXIT_XEN;
 	vcpu->run->xen.type = KVM_EXIT_XEN_HCALL;
 	vcpu->run->xen.u.hcall.longmode = longmode;
-	vcpu->run->xen.u.hcall.cpl = static_call(kvm_x86_get_cpl)(vcpu);
+	vcpu->run->xen.u.hcall.cpl = cpl;
 	vcpu->run->xen.u.hcall.input = input;
 	vcpu->run->xen.u.hcall.params[0] = params[0];
 	vcpu->run->xen.u.hcall.params[1] = params[1];
@@ -1297,14 +1319,6 @@ int kvm_xen_hypercall(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-static inline int max_evtchn_port(struct kvm *kvm)
-{
-	if (IS_ENABLED(CONFIG_64BIT) && kvm->arch.xen.long_mode)
-		return EVTCHN_2L_NR_CHANNELS;
-	else
-		return COMPAT_EVTCHN_2L_NR_CHANNELS;
-}
-
 static void kvm_xen_check_poller(struct kvm_vcpu *vcpu, int port)
 {
 	int poll_evtchn = vcpu->arch.xen.poll_evtchn;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 78c5bc654cff..6453fbaedb08 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -217,9 +217,15 @@ __ioremap_caller(resource_size_t phys_addr, unsigned long size,
 	 * Mappings have to be page-aligned
 	 */
 	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PHYSICAL_PAGE_MASK;
+	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
+	/*
+	 * Mask out any bits not part of the actual physical
+	 * address, like memory encryption bits.
+	 */
+	phys_addr &= PHYSICAL_PAGE_MASK;
+
 	retval = memtype_reserve(phys_addr, (u64)phys_addr + size,
 						pcm, &new_pcm);
 	if (retval) {
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 2e5a045731de..ef34ba21aa92 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/cc_platform.h>
 #include <linux/set_memory.h>
+#include <linux/memregion.h>
 
 #include <asm/e820/api.h>
 #include <asm/processor.h>
@@ -330,6 +331,23 @@ void arch_invalidate_pmem(void *addr, size_t size)
 EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
 #endif
 
+#ifdef CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
+bool cpu_cache_has_invalidate_memregion(void)
+{
+	return !cpu_feature_enabled(X86_FEATURE_HYPERVISOR);
+}
+EXPORT_SYMBOL_NS_GPL(cpu_cache_has_invalidate_memregion, DEVMEM);
+
+int cpu_cache_invalidate_memregion(int res_desc)
+{
+	if (WARN_ON_ONCE(!cpu_cache_has_invalidate_memregion()))
+		return -ENXIO;
+	wbinvd_on_all_cpus();
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(cpu_cache_invalidate_memregion, DEVMEM);
+#endif
+
 static void __cpa_flush_all(void *arg)
 {
 	unsigned long cache = (unsigned long)arg;
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 00127abd89ee..99620428ad78 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -11,7 +11,6 @@
 #include <linux/bpf.h>
 #include <linux/memory.h>
 #include <linux/sort.h>
-#include <linux/init.h>
 #include <asm/extable.h>
 #include <asm/set_memory.h>
 #include <asm/nospec-branch.h>
@@ -389,18 +388,6 @@ out:
 	return ret;
 }
 
-int __init bpf_arch_init_dispatcher_early(void *ip)
-{
-	const u8 *nop_insn = x86_nops[5];
-
-	if (is_endbr(*(u32 *)ip))
-		ip += ENDBR_INSN_SIZE;
-
-	if (memcmp(ip, nop_insn, X86_PATCH_SIZE))
-		text_poke_early(ip, nop_insn, X86_PATCH_SIZE);
-	return 0;
-}
-
 int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 		       void *old_addr, void *new_addr)
 {
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index 994a229cb79f..68244a3422d1 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -183,13 +183,12 @@ err_sysfs:
 	return r;
 }
 
-static int xo15_sci_remove(struct acpi_device *device)
+static void xo15_sci_remove(struct acpi_device *device)
 {
 	acpi_disable_gpe(NULL, xo15_sci_gpe);
 	acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
 	cancel_work_sync(&sci_work);
 	sysfs_remove_file(&device->dev.kobj, &lid_wake_on_close_attr.attr);
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index bb176c72891c..93ae33248f42 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -513,15 +513,23 @@ static int pm_cpu_check(const struct x86_cpu_id *c)
 
 static void pm_save_spec_msr(void)
 {
-	u32 spec_msr_id[] = {
-		MSR_IA32_SPEC_CTRL,
-		MSR_IA32_TSX_CTRL,
-		MSR_TSX_FORCE_ABORT,
-		MSR_IA32_MCU_OPT_CTRL,
-		MSR_AMD64_LS_CFG,
+	struct msr_enumeration {
+		u32 msr_no;
+		u32 feature;
+	} msr_enum[] = {
+		{ MSR_IA32_SPEC_CTRL,	 X86_FEATURE_MSR_SPEC_CTRL },
+		{ MSR_IA32_TSX_CTRL,	 X86_FEATURE_MSR_TSX_CTRL },
+		{ MSR_TSX_FORCE_ABORT,	 X86_FEATURE_TSX_FORCE_ABORT },
+		{ MSR_IA32_MCU_OPT_CTRL, X86_FEATURE_SRBDS_CTRL },
+		{ MSR_AMD64_LS_CFG,	 X86_FEATURE_LS_CFG_SSBD },
+		{ MSR_AMD64_DE_CFG,	 X86_FEATURE_LFENCE_RDTSC },
 	};
+	int i;
 
-	msr_build_context(spec_msr_id, ARRAY_SIZE(spec_msr_id));
+	for (i = 0; i < ARRAY_SIZE(msr_enum); i++) {
+		if (boot_cpu_has(msr_enum[i].feature))
+			msr_build_context(&msr_enum[i].msr_no, 1);
+	}
 }
 
 static int pm_check_save_msr(void)
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 745420853a7c..1a2ba31635a5 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -23,6 +23,7 @@
 #include <linux/start_kernel.h>
 #include <linux/sched.h>
 #include <linux/kprobes.h>
+#include <linux/kstrtox.h>
 #include <linux/memblock.h>
 #include <linux/export.h>
 #include <linux/mm.h>
@@ -113,7 +114,7 @@ static __read_mostly bool xen_msr_safe = IS_ENABLED(CONFIG_XEN_PV_MSR_SAFE);
 static int __init parse_xen_msr_safe(char *str)
 {
 	if (str)
-		return strtobool(str, &xen_msr_safe);
+		return kstrtobool(str, &xen_msr_safe);
 	return -EINVAL;
 }
 early_param("xen_msr_safe", parse_xen_msr_safe);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 4f4309500559..8db26f10fb1d 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -7,6 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/kstrtox.h>
 #include <linux/mm.h>
 #include <linux/pm.h>
 #include <linux/memblock.h>
@@ -85,7 +86,7 @@ static void __init xen_parse_512gb(void)
 	arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit=");
 	if (!arg)
 		val = true;
-	else if (strtobool(arg + strlen("xen_512gb_limit="), &val))
+	else if (kstrtobool(arg + strlen("xen_512gb_limit="), &val))
 		return;
 
 	xen_512gb_limit = val;
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index c3e1f9a7d43a..4b0d6fff88de 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -32,30 +32,30 @@ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
 
 void xen_smp_intr_free(unsigned int cpu)
 {
+	kfree(per_cpu(xen_resched_irq, cpu).name);
+	per_cpu(xen_resched_irq, cpu).name = NULL;
 	if (per_cpu(xen_resched_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu).irq, NULL);
 		per_cpu(xen_resched_irq, cpu).irq = -1;
-		kfree(per_cpu(xen_resched_irq, cpu).name);
-		per_cpu(xen_resched_irq, cpu).name = NULL;
 	}
+	kfree(per_cpu(xen_callfunc_irq, cpu).name);
+	per_cpu(xen_callfunc_irq, cpu).name = NULL;
 	if (per_cpu(xen_callfunc_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_callfunc_irq, cpu).irq, NULL);
 		per_cpu(xen_callfunc_irq, cpu).irq = -1;
-		kfree(per_cpu(xen_callfunc_irq, cpu).name);
-		per_cpu(xen_callfunc_irq, cpu).name = NULL;
 	}
+	kfree(per_cpu(xen_debug_irq, cpu).name);
+	per_cpu(xen_debug_irq, cpu).name = NULL;
 	if (per_cpu(xen_debug_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_debug_irq, cpu).irq, NULL);
 		per_cpu(xen_debug_irq, cpu).irq = -1;
-		kfree(per_cpu(xen_debug_irq, cpu).name);
-		per_cpu(xen_debug_irq, cpu).name = NULL;
 	}
+	kfree(per_cpu(xen_callfuncsingle_irq, cpu).name);
+	per_cpu(xen_callfuncsingle_irq, cpu).name = NULL;
 	if (per_cpu(xen_callfuncsingle_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_callfuncsingle_irq, cpu).irq,
 				       NULL);
 		per_cpu(xen_callfuncsingle_irq, cpu).irq = -1;
-		kfree(per_cpu(xen_callfuncsingle_irq, cpu).name);
-		per_cpu(xen_callfuncsingle_irq, cpu).name = NULL;
 	}
 }
 
@@ -65,6 +65,7 @@ int xen_smp_intr_init(unsigned int cpu)
 	char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	per_cpu(xen_resched_irq, cpu).name = resched_name;
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
 				    cpu,
 				    xen_reschedule_interrupt,
@@ -74,9 +75,9 @@ int xen_smp_intr_init(unsigned int cpu)
 	if (rc < 0)
 		goto fail;
 	per_cpu(xen_resched_irq, cpu).irq = rc;
-	per_cpu(xen_resched_irq, cpu).name = resched_name;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
 				    cpu,
 				    xen_call_function_interrupt,
@@ -86,10 +87,10 @@ int xen_smp_intr_init(unsigned int cpu)
 	if (rc < 0)
 		goto fail;
 	per_cpu(xen_callfunc_irq, cpu).irq = rc;
-	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 
 	if (!xen_fifo_events) {
 		debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+		per_cpu(xen_debug_irq, cpu).name = debug_name;
 		rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
 					     xen_debug_interrupt,
 					     IRQF_PERCPU | IRQF_NOBALANCING,
@@ -97,10 +98,10 @@ int xen_smp_intr_init(unsigned int cpu)
 		if (rc < 0)
 			goto fail;
 		per_cpu(xen_debug_irq, cpu).irq = rc;
-		per_cpu(xen_debug_irq, cpu).name = debug_name;
 	}
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
 				    cpu,
 				    xen_call_function_single_interrupt,
@@ -110,7 +111,6 @@ int xen_smp_intr_init(unsigned int cpu)
 	if (rc < 0)
 		goto fail;
 	per_cpu(xen_callfuncsingle_irq, cpu).irq = rc;
-	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 
 	return 0;
 
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 480be82e9b7b..6175f2c5c822 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -97,18 +97,18 @@ asmlinkage __visible void cpu_bringup_and_idle(void)
 
 void xen_smp_intr_free_pv(unsigned int cpu)
 {
+	kfree(per_cpu(xen_irq_work, cpu).name);
+	per_cpu(xen_irq_work, cpu).name = NULL;
 	if (per_cpu(xen_irq_work, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_irq_work, cpu).irq, NULL);
 		per_cpu(xen_irq_work, cpu).irq = -1;
-		kfree(per_cpu(xen_irq_work, cpu).name);
-		per_cpu(xen_irq_work, cpu).name = NULL;
 	}
 
+	kfree(per_cpu(xen_pmu_irq, cpu).name);
+	per_cpu(xen_pmu_irq, cpu).name = NULL;
 	if (per_cpu(xen_pmu_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_pmu_irq, cpu).irq, NULL);
 		per_cpu(xen_pmu_irq, cpu).irq = -1;
-		kfree(per_cpu(xen_pmu_irq, cpu).name);
-		per_cpu(xen_pmu_irq, cpu).name = NULL;
 	}
 }
 
@@ -118,6 +118,7 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	char *callfunc_name, *pmu_name;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "irqwork%d", cpu);
+	per_cpu(xen_irq_work, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_IRQ_WORK_VECTOR,
 				    cpu,
 				    xen_irq_work_interrupt,
@@ -127,10 +128,10 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	if (rc < 0)
 		goto fail;
 	per_cpu(xen_irq_work, cpu).irq = rc;
-	per_cpu(xen_irq_work, cpu).name = callfunc_name;
 
 	if (is_xen_pmu) {
 		pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
+		per_cpu(xen_pmu_irq, cpu).name = pmu_name;
 		rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
 					     xen_pmu_irq_handler,
 					     IRQF_PERCPU|IRQF_NOBALANCING,
@@ -138,7 +139,6 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 		if (rc < 0)
 			goto fail;
 		per_cpu(xen_pmu_irq, cpu).irq = rc;
-		per_cpu(xen_pmu_irq, cpu).name = pmu_name;
 	}
 
 	return 0;
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 043c73dfd2c9..5c6fc16e4b92 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -75,6 +75,7 @@ void xen_init_lock_cpu(int cpu)
 	     cpu, per_cpu(lock_kicker_irq, cpu));
 
 	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	per_cpu(irq_name, cpu) = name;
 	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
 				     cpu,
 				     dummy_handler,
@@ -85,7 +86,6 @@ void xen_init_lock_cpu(int cpu)
 	if (irq >= 0) {
 		disable_irq(irq); /* make sure it's never delivered */
 		per_cpu(lock_kicker_irq, cpu) = irq;
-		per_cpu(irq_name, cpu) = name;
 	}
 
 	printk("cpu %d spinlock event irq %d\n", cpu, irq);
@@ -98,6 +98,8 @@ void xen_uninit_lock_cpu(int cpu)
 	if (!xen_pvspin)
 		return;
 
+	kfree(per_cpu(irq_name, cpu));
+	per_cpu(irq_name, cpu) = NULL;
 	/*
 	 * When booting the kernel with 'mitigations=auto,nosmt', the secondary
 	 * CPUs are not activated, and lock_kicker_irq is not initialized.
@@ -108,8 +110,6 @@ void xen_uninit_lock_cpu(int cpu)
 
 	unbind_from_irqhandler(irq, NULL);
 	per_cpu(lock_kicker_irq, cpu) = -1;
-	kfree(per_cpu(irq_name, cpu));
-	per_cpu(irq_name, cpu) = NULL;
 }
 
 PV_CALLEE_SAVE_REGS_THUNK(xen_vcpu_stolen);
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 6b4fdf6b9542..4a184f6e4e4d 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -262,10 +262,10 @@ SYM_CODE_START(xen_entry_SYSCALL_compat)
 
 	/*
 	 * Neither Xen nor the kernel really knows what the old SS and
-	 * CS were.  The kernel expects __USER32_DS and __USER32_CS, so
+	 * CS were.  The kernel expects __USER_DS and __USER32_CS, so
 	 * report those values even though Xen will guess its own values.
 	 */
-	movq $__USER32_DS, 4*8(%rsp)
+	movq $__USER_DS, 4*8(%rsp)
 	movq $__USER32_CS, 1*8(%rsp)
 
 	jmp entry_SYSCALL_compat_after_hwframe
@@ -284,10 +284,10 @@ SYM_CODE_START(xen_entry_SYSENTER_compat)
 
 	/*
 	 * Neither Xen nor the kernel really knows what the old SS and
-	 * CS were.  The kernel expects __USER32_DS and __USER32_CS, so
+	 * CS were.  The kernel expects __USER_DS and __USER32_CS, so
 	 * report those values even though Xen will guess its own values.
 	 */
-	movq $__USER32_DS, 4*8(%rsp)
+	movq $__USER_DS, 4*8(%rsp)
 	movq $__USER32_CS, 1*8(%rsp)
 
 	jmp entry_SYSENTER_compat_after_hwframe