summaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/kgdb_stub.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/kernel/kgdb_stub.c')
-rw-r--r--arch/sh/kernel/kgdb_stub.c1052
1 files changed, 0 insertions, 1052 deletions
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
deleted file mode 100644
index bf8ac4c71640..000000000000
--- a/arch/sh/kernel/kgdb_stub.c
+++ /dev/null
@@ -1,1052 +0,0 @@
-/*
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Contains extracts from code by Glenn Engel, Jim Kingdon,
- * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
- * Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>,
- * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- *
- * This version by Henry Bell <henry.bell@st.com>
- * Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- *
- * Contains low-level support for remote debug using GDB.
- *
- * To enable debugger support, two things need to happen. A call to
- * set_debug_traps() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * A breakpoint also needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint() which does
- * a trapa if the initialisation phase has been successfully completed.
- *
- * In this case, set_debug_traps() is not used to "take over" exceptions;
- * other kernel code is modified instead to enter the kgdb functions here
- * when appropriate (see entry.S for breakpoint traps and NMI interrupts,
- * see traps.c for kernel error exceptions).
- *
- * The following gdb commands are supported:
- *
- * Command Function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- * XAA..AA,LLLL: Same, but data is binary (not hex) OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- * CNN; Resume at current address with signal SNN
- * CNN;AA..AA Resume at address AA..AA with signal SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- * SNN; Step one instruction with signal SNN
- * SNNAA..AA Step one instruction from AA..AA w/NN SNN
- *
- * k kill (Detach GDB)
- *
- * d Toggle debug flag
- * D Detach GDB
- *
- * Hct Set thread t for operations, OK or ENN
- * c = 'c' (step, cont), c = 'g' (other
- * operations)
- *
- * qC Query current thread ID QCpid
- * qfThreadInfo Get list of current threads (first) m<id>
- * qsThreadInfo " " " " " (subsequent)
- * qOffsets Get section offsets Text=x;Data=y;Bss=z
- *
- * TXX Find if thread XX is alive OK or ENN
- * ? What was the last sigval ? SNN (signal NN)
- * O Output to GDB console
- *
- * Remote communication protocol.
- *
- * A debug packet whose contents are <data> is encapsulated for
- * transmission in the form:
- *
- * $ <data> # CSUM1 CSUM2
- *
- * <data> must be ASCII alphanumeric and cannot include characters
- * '$' or '#'. If <data> starts with two characters followed by
- * ':', then the existing stubs interpret this as a sequence number.
- *
- * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
- * checksum of <data>, the most significant nibble is sent first.
- * the hex digits 0-9,a-f are used.
- *
- * Receiver responds with:
- *
- * + - if CSUM is correct and ready for next packet
- * - - if CSUM is incorrect
- *
- * Responses can be run-length encoded to save space. A '*' means that
- * the next character is an ASCII encoding giving a repeat count which
- * stands for that many repetitions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3
- * (which is where RLE starts to win). Don't use an n > 126.
- *
- * So "0* " means the same as "0000".
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/module.h>
-#include <asm/system.h>
-#include <asm/cacheflush.h>
-#include <asm/current.h>
-#include <asm/signal.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-#include <asm/kgdb.h>
-#include <asm/io.h>
-
-/* Function pointers for linkage */
-kgdb_debug_hook_t *kgdb_debug_hook;
-kgdb_bus_error_hook_t *kgdb_bus_err_hook;
-
-int (*kgdb_getchar)(void);
-EXPORT_SYMBOL_GPL(kgdb_getchar);
-void (*kgdb_putchar)(int);
-EXPORT_SYMBOL_GPL(kgdb_putchar);
-
-static void put_debug_char(int c)
-{
- if (!kgdb_putchar)
- return;
- (*kgdb_putchar)(c);
-}
-static int get_debug_char(void)
-{
- if (!kgdb_getchar)
- return -1;
- return (*kgdb_getchar)();
-}
-
-/* Num chars in in/out bound buffers, register packets need NUMREGBYTES * 2 */
-#define BUFMAX 1024
-#define NUMREGBYTES (MAXREG*4)
-#define OUTBUFMAX (NUMREGBYTES*2+512)
-
-enum {
- R0 = 0, R1, R2, R3, R4, R5, R6, R7,
- R8, R9, R10, R11, R12, R13, R14, R15,
- PC, PR, GBR, VBR, MACH, MACL, SR,
- /* */
- MAXREG
-};
-
-static unsigned int registers[MAXREG];
-struct kgdb_regs trap_registers;
-
-char kgdb_in_gdb_mode;
-char in_nmi; /* Set during NMI to prevent reentry */
-int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */
-
-/* Default values for SCI (can override via kernel args in setup.c) */
-#ifndef CONFIG_KGDB_DEFPORT
-#define CONFIG_KGDB_DEFPORT 1
-#endif
-
-#ifndef CONFIG_KGDB_DEFBAUD
-#define CONFIG_KGDB_DEFBAUD 115200
-#endif
-
-#if defined(CONFIG_KGDB_DEFPARITY_E)
-#define CONFIG_KGDB_DEFPARITY 'E'
-#elif defined(CONFIG_KGDB_DEFPARITY_O)
-#define CONFIG_KGDB_DEFPARITY 'O'
-#else /* CONFIG_KGDB_DEFPARITY_N */
-#define CONFIG_KGDB_DEFPARITY 'N'
-#endif
-
-#ifdef CONFIG_KGDB_DEFBITS_7
-#define CONFIG_KGDB_DEFBITS '7'
-#else /* CONFIG_KGDB_DEFBITS_8 */
-#define CONFIG_KGDB_DEFBITS '8'
-#endif
-
-/* SCI/UART settings, used in kgdb_console_setup() */
-int kgdb_portnum = CONFIG_KGDB_DEFPORT;
-EXPORT_SYMBOL_GPL(kgdb_portnum);
-int kgdb_baud = CONFIG_KGDB_DEFBAUD;
-EXPORT_SYMBOL_GPL(kgdb_baud);
-char kgdb_parity = CONFIG_KGDB_DEFPARITY;
-EXPORT_SYMBOL_GPL(kgdb_parity);
-char kgdb_bits = CONFIG_KGDB_DEFBITS;
-EXPORT_SYMBOL_GPL(kgdb_bits);
-
-/* Jump buffer for setjmp/longjmp */
-static jmp_buf rem_com_env;
-
-/* TRA differs sh3/4 */
-#if defined(CONFIG_CPU_SH3)
-#define TRA 0xffffffd0
-#elif defined(CONFIG_CPU_SH4)
-#define TRA 0xff000020
-#endif
-
-/* Macros for single step instruction identification */
-#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
-#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
-#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
- (((op) & 0x7f ) << 1))
-#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
-#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
-#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
-#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
-#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
-#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
-#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
-#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
-#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
-#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_RTS(op) ((op) == 0xb)
-#define OPCODE_RTE(op) ((op) == 0x2b)
-
-#define SR_T_BIT_MASK 0x1
-#define STEP_OPCODE 0xc320
-#define BIOS_CALL_TRAP 0x3f
-
-/* Exception codes as per SH-4 core manual */
-#define ADDRESS_ERROR_LOAD_VEC 7
-#define ADDRESS_ERROR_STORE_VEC 8
-#define TRAP_VEC 11
-#define INVALID_INSN_VEC 12
-#define INVALID_SLOT_VEC 13
-#define NMI_VEC 14
-#define USER_BREAK_VEC 15
-#define SERIAL_BREAK_VEC 58
-
-/* Misc static */
-static int stepped_address;
-static short stepped_opcode;
-static char in_buffer[BUFMAX];
-static char out_buffer[OUTBUFMAX];
-
-static void kgdb_to_gdb(const char *s);
-
-/* Convert ch to hex */
-static int hex(const char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return (ch - 'a' + 10);
- if ((ch >= '0') && (ch <= '9'))
- return (ch - '0');
- if ((ch >= 'A') && (ch <= 'F'))
- return (ch - 'A' + 10);
- return (-1);
-}
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- Returns a pointer to the last char put in buf (null) */
-static char *mem_to_hex(const char *mem, char *buf, const int count)
-{
- int i;
- int ch;
- unsigned short s_val;
- unsigned long l_val;
-
- /* Check for 16 or 32 */
- if (count == 2 && ((long) mem & 1) == 0) {
- s_val = *(unsigned short *) mem;
- mem = (char *) &s_val;
- } else if (count == 4 && ((long) mem & 3) == 0) {
- l_val = *(unsigned long *) mem;
- mem = (char *) &l_val;
- }
- for (i = 0; i < count; i++) {
- ch = *mem++;
- buf = pack_hex_byte(buf, ch);
- }
- *buf = 0;
- return (buf);
-}
-
-/* Convert the hex array pointed to by buf into binary, to be placed in mem.
- Return a pointer to the character after the last byte written */
-static char *hex_to_mem(const char *buf, char *mem, const int count)
-{
- int i;
- unsigned char ch;
-
- for (i = 0; i < count; i++) {
- ch = hex(*buf++) << 4;
- ch = ch + hex(*buf++);
- *mem++ = ch;
- }
- return (mem);
-}
-
-/* While finding valid hex chars, convert to an integer, then return it */
-static int hex_to_int(char **ptr, int *int_value)
-{
- int num_chars = 0;
- int hex_value;
-
- *int_value = 0;
-
- while (**ptr) {
- hex_value = hex(**ptr);
- if (hex_value >= 0) {
- *int_value = (*int_value << 4) | hex_value;
- num_chars++;
- } else
- break;
- (*ptr)++;
- }
- return num_chars;
-}
-
-/* Copy the binary array pointed to by buf into mem. Fix $, #,
- and 0x7d escaped with 0x7d. Return a pointer to the character
- after the last byte written. */
-static char *ebin_to_mem(const char *buf, char *mem, int count)
-{
- for (; count > 0; count--, buf++) {
- if (*buf == 0x7d)
- *mem++ = *(++buf) ^ 0x20;
- else
- *mem++ = *buf;
- }
- return mem;
-}
-
-/* Scan for the start char '$', read the packet and check the checksum */
-static void get_packet(char *buffer, int buflen)
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- char ch;
-
- do {
- /* Ignore everything until the start character */
- while ((ch = get_debug_char()) != '$');
-
- checksum = 0;
- xmitcsum = -1;
- count = 0;
-
- /* Now, read until a # or end of buffer is found */
- while (count < (buflen - 1)) {
- ch = get_debug_char();
-
- if (ch == '#')
- break;
-
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- buffer[count] = 0;
-
- /* Continue to read checksum following # */
- if (ch == '#') {
- xmitcsum = hex(get_debug_char()) << 4;
- xmitcsum += hex(get_debug_char());
-
- /* Checksum */
- if (checksum != xmitcsum)
- put_debug_char('-'); /* Failed checksum */
- else {
- /* Ack successful transfer */
- put_debug_char('+');
-
- /* If a sequence char is present, reply
- the sequence ID */
- if (buffer[2] == ':') {
- put_debug_char(buffer[0]);
- put_debug_char(buffer[1]);
-
- /* Remove sequence chars from buffer */
- count = strlen(buffer);
- for (i = 3; i <= count; i++)
- buffer[i - 3] = buffer[i];
- }
- }
- }
- }
- while (checksum != xmitcsum); /* Keep trying while we fail */
-}
-
-/* Send the packet in the buffer with run-length encoding */
-static void put_packet(char *buffer)
-{
- int checksum;
- char *src;
- int runlen;
- int encode;
-
- do {
- src = buffer;
- put_debug_char('$');
- checksum = 0;
-
- /* Continue while we still have chars left */
- while (*src) {
- /* Check for runs up to 99 chars long */
- for (runlen = 1; runlen < 99; runlen++) {
- if (src[0] != src[runlen])
- break;
- }
-
- if (runlen > 3) {
- /* Got a useful amount, send encoding */
- encode = runlen + ' ' - 4;
- put_debug_char(*src); checksum += *src;
- put_debug_char('*'); checksum += '*';
- put_debug_char(encode); checksum += encode;
- src += runlen;
- } else {
- /* Otherwise just send the current char */
- put_debug_char(*src); checksum += *src;
- src += 1;
- }
- }
-
- /* '#' Separator, put high and low components of checksum */
- put_debug_char('#');
- put_debug_char(hex_asc_hi(checksum));
- put_debug_char(hex_asc_lo(checksum));
- }
- while ((get_debug_char()) != '+'); /* While no ack */
-}
-
-/* A bus error has occurred - perform a longjmp to return execution and
- allow handling of the error */
-static void kgdb_handle_bus_error(void)
-{
- longjmp(rem_com_env, 1);
-}
-
-/* Translate SH-3/4 exception numbers to unix-like signal values */
-static int compute_signal(const int excep_code)
-{
- int sigval;
-
- switch (excep_code) {
-
- case INVALID_INSN_VEC:
- case INVALID_SLOT_VEC:
- sigval = SIGILL;
- break;
- case ADDRESS_ERROR_LOAD_VEC:
- case ADDRESS_ERROR_STORE_VEC:
- sigval = SIGSEGV;
- break;
-
- case SERIAL_BREAK_VEC:
- case NMI_VEC:
- sigval = SIGINT;
- break;
-
- case USER_BREAK_VEC:
- case TRAP_VEC:
- sigval = SIGTRAP;
- break;
-
- default:
- sigval = SIGBUS; /* "software generated" */
- break;
- }
-
- return (sigval);
-}
-
-/* Make a local copy of the registers passed into the handler (bletch) */
-static void kgdb_regs_to_gdb_regs(const struct kgdb_regs *regs,
- int *gdb_regs)
-{
- gdb_regs[R0] = regs->regs[R0];
- gdb_regs[R1] = regs->regs[R1];
- gdb_regs[R2] = regs->regs[R2];
- gdb_regs[R3] = regs->regs[R3];
- gdb_regs[R4] = regs->regs[R4];
- gdb_regs[R5] = regs->regs[R5];
- gdb_regs[R6] = regs->regs[R6];
- gdb_regs[R7] = regs->regs[R7];
- gdb_regs[R8] = regs->regs[R8];
- gdb_regs[R9] = regs->regs[R9];
- gdb_regs[R10] = regs->regs[R10];
- gdb_regs[R11] = regs->regs[R11];
- gdb_regs[R12] = regs->regs[R12];
- gdb_regs[R13] = regs->regs[R13];
- gdb_regs[R14] = regs->regs[R14];
- gdb_regs[R15] = regs->regs[R15];
- gdb_regs[PC] = regs->pc;
- gdb_regs[PR] = regs->pr;
- gdb_regs[GBR] = regs->gbr;
- gdb_regs[MACH] = regs->mach;
- gdb_regs[MACL] = regs->macl;
- gdb_regs[SR] = regs->sr;
- gdb_regs[VBR] = regs->vbr;
-}
-
-/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
-static void gdb_regs_to_kgdb_regs(const int *gdb_regs,
- struct kgdb_regs *regs)
-{
- regs->regs[R0] = gdb_regs[R0];
- regs->regs[R1] = gdb_regs[R1];
- regs->regs[R2] = gdb_regs[R2];
- regs->regs[R3] = gdb_regs[R3];
- regs->regs[R4] = gdb_regs[R4];
- regs->regs[R5] = gdb_regs[R5];
- regs->regs[R6] = gdb_regs[R6];
- regs->regs[R7] = gdb_regs[R7];
- regs->regs[R8] = gdb_regs[R8];
- regs->regs[R9] = gdb_regs[R9];
- regs->regs[R10] = gdb_regs[R10];
- regs->regs[R11] = gdb_regs[R11];
- regs->regs[R12] = gdb_regs[R12];
- regs->regs[R13] = gdb_regs[R13];
- regs->regs[R14] = gdb_regs[R14];
- regs->regs[R15] = gdb_regs[R15];
- regs->pc = gdb_regs[PC];
- regs->pr = gdb_regs[PR];
- regs->gbr = gdb_regs[GBR];
- regs->mach = gdb_regs[MACH];
- regs->macl = gdb_regs[MACL];
- regs->sr = gdb_regs[SR];
- regs->vbr = gdb_regs[VBR];
-}
-
-/* Calculate the new address for after a step */
-static short *get_step_address(void)
-{
- short op = *(short *) trap_registers.pc;
- long addr;
-
- /* BT */
- if (OPCODE_BT(op)) {
- if (trap_registers.sr & SR_T_BIT_MASK)
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 2;
- }
-
- /* BTS */
- else if (OPCODE_BTS(op)) {
- if (trap_registers.sr & SR_T_BIT_MASK)
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 4; /* Not in delay slot */
- }
-
- /* BF */
- else if (OPCODE_BF(op)) {
- if (!(trap_registers.sr & SR_T_BIT_MASK))
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 2;
- }
-
- /* BFS */
- else if (OPCODE_BFS(op)) {
- if (!(trap_registers.sr & SR_T_BIT_MASK))
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 4; /* Not in delay slot */
- }
-
- /* BRA */
- else if (OPCODE_BRA(op))
- addr = trap_registers.pc + 4 + OPCODE_BRA_DISP(op);
-
- /* BRAF */
- else if (OPCODE_BRAF(op))
- addr = trap_registers.pc + 4
- + trap_registers.regs[OPCODE_BRAF_REG(op)];
-
- /* BSR */
- else if (OPCODE_BSR(op))
- addr = trap_registers.pc + 4 + OPCODE_BSR_DISP(op);
-
- /* BSRF */
- else if (OPCODE_BSRF(op))
- addr = trap_registers.pc + 4
- + trap_registers.regs[OPCODE_BSRF_REG(op)];
-
- /* JMP */
- else if (OPCODE_JMP(op))
- addr = trap_registers.regs[OPCODE_JMP_REG(op)];
-
- /* JSR */
- else if (OPCODE_JSR(op))
- addr = trap_registers.regs[OPCODE_JSR_REG(op)];
-
- /* RTS */
- else if (OPCODE_RTS(op))
- addr = trap_registers.pr;
-
- /* RTE */
- else if (OPCODE_RTE(op))
- addr = trap_registers.regs[15];
-
- /* Other */
- else
- addr = trap_registers.pc + 2;
-
- flush_icache_range(addr, addr + 2);
- return (short *) addr;
-}
-
-/* Set up a single-step. Replace the instruction immediately after the
- current instruction (i.e. next in the expected flow of control) with a
- trap instruction, so that returning will cause only a single instruction
- to be executed. Note that this model is slightly broken for instructions
- with delay slots (e.g. B[TF]S, BSR, BRA etc), where both the branch
- and the instruction in the delay slot will be executed. */
-static void do_single_step(void)
-{
- unsigned short *addr = 0;
-
- /* Determine where the target instruction will send us to */
- addr = get_step_address();
- stepped_address = (int)addr;
-
- /* Replace it */
- stepped_opcode = *(short *)addr;
- *addr = STEP_OPCODE;
-
- /* Flush and return */
- flush_icache_range((long) addr, (long) addr + 2);
-}
-
-/* Undo a single step */
-static void undo_single_step(void)
-{
- /* If we have stepped, put back the old instruction */
- /* Use stepped_address in case we stopped elsewhere */
- if (stepped_opcode != 0) {
- *(short*)stepped_address = stepped_opcode;
- flush_icache_range(stepped_address, stepped_address + 2);
- }
- stepped_opcode = 0;
-}
-
-/* Send a signal message */
-static void send_signal_msg(const int signum)
-{
- out_buffer[0] = 'S';
- out_buffer[1] = hex_asc_hi(signum);
- out_buffer[2] = hex_asc_lo(signum);
- out_buffer[3] = 0;
- put_packet(out_buffer);
-}
-
-/* Reply that all was well */
-static void send_ok_msg(void)
-{
- strcpy(out_buffer, "OK");
- put_packet(out_buffer);
-}
-
-/* Reply that an error occurred */
-static void send_err_msg(void)
-{
- strcpy(out_buffer, "E01");
- put_packet(out_buffer);
-}
-
-/* Empty message indicates unrecognised command */
-static void send_empty_msg(void)
-{
- put_packet("");
-}
-
-/* Read memory due to 'm' message */
-static void read_mem_msg(void)
-{
- char *ptr;
- int addr;
- int length;
-
- /* Jmp, disable bus error handler */
- if (setjmp(rem_com_env) == 0) {
-
- kgdb_nofault = 1;
-
- /* Walk through, have m<addr>,<length> */
- ptr = &in_buffer[1];
- if (hex_to_int(&ptr, &addr) && (*ptr++ == ','))
- if (hex_to_int(&ptr, &length)) {
- ptr = 0;
- if (length * 2 > OUTBUFMAX)
- length = OUTBUFMAX / 2;
- mem_to_hex((char *) addr, out_buffer, length);
- }
- if (ptr)
- send_err_msg();
- else
- put_packet(out_buffer);
- } else
- send_err_msg();
-
- /* Restore bus error handler */
- kgdb_nofault = 0;
-}
-
-/* Write memory due to 'M' or 'X' message */
-static void write_mem_msg(int binary)
-{
- char *ptr;
- int addr;
- int length;
-
- if (setjmp(rem_com_env) == 0) {
-
- kgdb_nofault = 1;
-
- /* Walk through, have M<addr>,<length>:<data> */
- ptr = &in_buffer[1];
- if (hex_to_int(&ptr, &addr) && (*ptr++ == ','))
- if (hex_to_int(&ptr, &length) && (*ptr++ == ':')) {
- if (binary)
- ebin_to_mem(ptr, (char*)addr, length);
- else
- hex_to_mem(ptr, (char*)addr, length);
- flush_icache_range(addr, addr + length);
- ptr = 0;
- send_ok_msg();
- }
- if (ptr)
- send_err_msg();
- } else
- send_err_msg();
-
- /* Restore bus error handler */
- kgdb_nofault = 0;
-}
-
-/* Continue message */
-static void continue_msg(void)
-{
- /* Try to read optional parameter, PC unchanged if none */
- char *ptr = &in_buffer[1];
- int addr;
-
- if (hex_to_int(&ptr, &addr))
- trap_registers.pc = addr;
-}
-
-/* Continue message with signal */
-static void continue_with_sig_msg(void)
-{
- int signal;
- char *ptr = &in_buffer[1];
- int addr;
-
- /* Report limitation */
- kgdb_to_gdb("Cannot force signal in kgdb, continuing anyway.\n");
-
- /* Signal */
- hex_to_int(&ptr, &signal);
- if (*ptr == ';')
- ptr++;
-
- /* Optional address */
- if (hex_to_int(&ptr, &addr))
- trap_registers.pc = addr;
-}
-
-/* Step message */
-static void step_msg(void)
-{
- continue_msg();
- do_single_step();
-}
-
-/* Step message with signal */
-static void step_with_sig_msg(void)
-{
- continue_with_sig_msg();
- do_single_step();
-}
-
-/* Send register contents */
-static void send_regs_msg(void)
-{
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- mem_to_hex((char *) registers, out_buffer, NUMREGBYTES);
- put_packet(out_buffer);
-}
-
-/* Set register contents - currently can't set other thread's registers */
-static void set_regs_msg(void)
-{
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
- gdb_regs_to_kgdb_regs(registers, &trap_registers);
- send_ok_msg();
-}
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * Bring up the ports..
- */
-static int __init kgdb_serial_setup(void)
-{
- struct console dummy;
- return kgdb_console_setup(&dummy, 0);
-}
-#else
-#define kgdb_serial_setup() 0
-#endif
-
-/* The command loop, read and act on requests */
-static void kgdb_command_loop(const int excep_code, const int trapa_value)
-{
- int sigval;
-
- /* Enter GDB mode (e.g. after detach) */
- if (!kgdb_in_gdb_mode) {
- /* Do serial setup, notify user, issue preemptive ack */
- printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
- kgdb_in_gdb_mode = 1;
- put_debug_char('+');
- }
-
- /* Reply to host that an exception has occurred */
- sigval = compute_signal(excep_code);
- send_signal_msg(sigval);
-
- /* TRAP_VEC exception indicates a software trap inserted in place of
- code by GDB so back up PC by one instruction, as this instruction
- will later be replaced by its original one. Do NOT do this for
- trap 0xff, since that indicates a compiled-in breakpoint which
- will not be replaced (and we would retake the trap forever) */
- if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
- trap_registers.pc -= 2;
-
- /* Undo any stepping we may have done */
- undo_single_step();
-
- while (1) {
- out_buffer[0] = 0;
- get_packet(in_buffer, BUFMAX);
-
- /* Examine first char of buffer to see what we need to do */
- switch (in_buffer[0]) {
- case '?': /* Send which signal we've received */
- send_signal_msg(sigval);
- break;
-
- case 'g': /* Return the values of the CPU registers */
- send_regs_msg();
- break;
-
- case 'G': /* Set the value of the CPU registers */
- set_regs_msg();
- break;
-
- case 'm': /* Read LLLL bytes address AA..AA */
- read_mem_msg();
- break;
-
- case 'M': /* Write LLLL bytes address AA..AA, ret OK */
- write_mem_msg(0); /* 0 = data in hex */
- break;
-
- case 'X': /* Write LLLL bytes esc bin address AA..AA */
- if (kgdb_bits == '8')
- write_mem_msg(1); /* 1 = data in binary */
- else
- send_empty_msg();
- break;
-
- case 'C': /* Continue, signum included, we ignore it */
- continue_with_sig_msg();
- return;
-
- case 'c': /* Continue at address AA..AA (optional) */
- continue_msg();
- return;
-
- case 'S': /* Step, signum included, we ignore it */
- step_with_sig_msg();
- return;
-
- case 's': /* Step one instruction from AA..AA */
- step_msg();
- return;
-
- case 'k': /* 'Kill the program' with a kernel ? */
- break;
-
- case 'D': /* Detach from program, send reply OK */
- kgdb_in_gdb_mode = 0;
- send_ok_msg();
- get_debug_char();
- return;
-
- default:
- send_empty_msg();
- break;
- }
- }
-}
-
-/* There has been an exception, most likely a breakpoint. */
-static void handle_exception(struct pt_regs *regs)
-{
- int excep_code, vbr_val;
- int count;
- int trapa_value = ctrl_inl(TRA);
-
- /* Copy kernel regs (from stack) */
- for (count = 0; count < 16; count++)
- trap_registers.regs[count] = regs->regs[count];
- trap_registers.pc = regs->pc;
- trap_registers.pr = regs->pr;
- trap_registers.sr = regs->sr;
- trap_registers.gbr = regs->gbr;
- trap_registers.mach = regs->mach;
- trap_registers.macl = regs->macl;
-
- asm("stc vbr, %0":"=r"(vbr_val));
- trap_registers.vbr = vbr_val;
-
- /* Get excode for command loop call, user access */
- asm("stc r2_bank, %0":"=r"(excep_code));
-
- /* Act on the exception */
- kgdb_command_loop(excep_code, trapa_value);
-
- /* Copy back the (maybe modified) registers */
- for (count = 0; count < 16; count++)
- regs->regs[count] = trap_registers.regs[count];
- regs->pc = trap_registers.pc;
- regs->pr = trap_registers.pr;
- regs->sr = trap_registers.sr;
- regs->gbr = trap_registers.gbr;
- regs->mach = trap_registers.mach;
- regs->macl = trap_registers.macl;
-
- vbr_val = trap_registers.vbr;
- asm("ldc %0, vbr": :"r"(vbr_val));
-}
-
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs __regs)
-{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
- handle_exception(regs);
-}
-
-/* Initialise the KGDB data structures and serial configuration */
-int __init kgdb_init(void)
-{
- in_nmi = 0;
- kgdb_nofault = 0;
- stepped_opcode = 0;
- kgdb_in_gdb_mode = 0;
-
- if (kgdb_serial_setup() != 0) {
- printk(KERN_NOTICE "KGDB: serial setup error\n");
- return -1;
- }
-
- /* Init ptr to exception handler */
- kgdb_debug_hook = handle_exception;
- kgdb_bus_err_hook = kgdb_handle_bus_error;
-
- /* Enter kgdb now if requested, or just report init done */
- printk(KERN_NOTICE "KGDB: stub is initialized.\n");
-
- return 0;
-}
-
-/* Make function available for "user messages"; console will use it too. */
-
-char gdbmsgbuf[BUFMAX];
-#define MAXOUT ((BUFMAX-2)/2)
-
-static void kgdb_msg_write(const char *s, unsigned count)
-{
- int i;
- int wcount;
- char *bufptr;
-
- /* 'O'utput */
- gdbmsgbuf[0] = 'O';
-
- /* Fill and send buffers... */
- while (count > 0) {
- bufptr = gdbmsgbuf + 1;
-
- /* Calculate how many this time */
- wcount = (count > MAXOUT) ? MAXOUT : count;
-
- /* Pack in hex chars */
- for (i = 0; i < wcount; i++)
- bufptr = pack_hex_byte(bufptr, s[i]);
- *bufptr = '\0';
-
- /* Move up */
- s += wcount;
- count -= wcount;
-
- /* Write packet */
- put_packet(gdbmsgbuf);
- }
-}
-
-static void kgdb_to_gdb(const char *s)
-{
- kgdb_msg_write(s, strlen(s));
-}
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-void kgdb_console_write(struct console *co, const char *s, unsigned count)
-{
- /* Bail if we're not talking to GDB */
- if (!kgdb_in_gdb_mode)
- return;
-
- kgdb_msg_write(s, count);
-}
-#endif
-
-#ifdef CONFIG_KGDB_SYSRQ
-static void sysrq_handle_gdb(int key, struct tty_struct *tty)
-{
- printk("Entering GDB stub\n");
- breakpoint();
-}
-
-static struct sysrq_key_op sysrq_gdb_op = {
- .handler = sysrq_handle_gdb,
- .help_msg = "Gdb",
- .action_msg = "GDB",
-};
-
-static int gdb_register_sysrq(void)
-{
- printk("Registering GDB sysrq handler\n");
- register_sysrq_key('g', &sysrq_gdb_op);
- return 0;
-}
-module_init(gdb_register_sysrq);
-#endif