diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7724')
-rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 110 |
1 files changed, 98 insertions, 12 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 15456a0773bf..00973e0f8c63 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -39,7 +39,15 @@ * SW41 : abxx xxxx -> a = 0 : Analog monitor * 1 : Digital monitor * b = 0 : VGA - * 1 : SVGA + * 1 : 720p + */ + +/* + * about 720p + * + * When you use 1280 x 720 lcdc output, + * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz, + * and change SW41 to use 720p */ /* Heartbeat */ @@ -158,7 +166,7 @@ static struct resource lcdc_resources[] = { [0] = { .name = "LCDC", .start = 0xfe940000, - .end = 0xfe941fff, + .end = 0xfe942fff, .flags = IORESOURCE_MEM, }, [1] = { @@ -174,6 +182,9 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, + .archdata = { + .hwblk_id = HWBLK_LCDC, + }, }; /* CEU0 */ @@ -205,6 +216,9 @@ static struct platform_device ceu0_device = { .dev = { .platform_data = &sh_mobile_ceu0_info, }, + .archdata = { + .hwblk_id = HWBLK_CEU0, + }, }; /* CEU1 */ @@ -236,6 +250,9 @@ static struct platform_device ceu1_device = { .dev = { .platform_data = &sh_mobile_ceu1_info, }, + .archdata = { + .hwblk_id = HWBLK_CEU1, + }, }; /* KEYSC in SoC (Needs SW33-2 set to ON) */ @@ -274,6 +291,9 @@ static struct platform_device keysc_device = { .dev = { .platform_data = &keysc_info, }, + .archdata = { + .hwblk_id = HWBLK_KEYSC, + }, }; /* SH Eth */ @@ -302,15 +322,19 @@ static struct platform_device sh_eth_device = { }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, + .archdata = { + .hwblk_id = HWBLK_ETHER, + }, }; static struct r8a66597_platdata sh7724_usb0_host_data = { + .on_chip = 1, }; static struct resource sh7724_usb0_host_resources[] = { [0] = { .start = 0xa4d80000, - .end = 0xa4d800ff, + .end = 0xa4d80124 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -330,6 +354,38 @@ static struct platform_device sh7724_usb0_host_device = { }, .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources), .resource = sh7724_usb0_host_resources, + .archdata = { + .hwblk_id = HWBLK_USB0, + }, +}; + +static struct r8a66597_platdata sh7724_usb1_gadget_data = { + .on_chip = 1, +}; + +static struct resource sh7724_usb1_gadget_resources[] = { + [0] = { + .start = 0xa4d90000, + .end = 0xa4d90123, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 66, + .end = 66, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device sh7724_usb1_gadget_device = { + .name = "r8a66597_udc", + .id = 1, /* USB1 */ + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh7724_usb1_gadget_data, + }, + .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources), + .resource = sh7724_usb1_gadget_resources, }; static struct platform_device *ms7724se_devices[] __initdata = { @@ -342,6 +398,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { &keysc_device, &sh_eth_device, &sh7724_usb0_host_device, + &sh7724_usb1_gadget_device, }; #define EEPROM_OP 0xBA206000 @@ -421,9 +478,38 @@ static int __init devices_setup(void) /* turn on USB clocks, use external clock */ ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); +#ifdef CONFIG_PM + /* Let LED9 show STATUS2 */ + gpio_request(GPIO_FN_STATUS2, NULL); + + /* Lit LED10 show STATUS0 */ + gpio_request(GPIO_FN_STATUS0, NULL); + + /* Lit LED11 show PDSTATUS */ + gpio_request(GPIO_FN_PDSTATUS, NULL); +#else + /* Lit LED9 */ + gpio_request(GPIO_PTJ6, NULL); + gpio_direction_output(GPIO_PTJ6, 1); + gpio_export(GPIO_PTJ6, 0); + + /* Lit LED10 */ + gpio_request(GPIO_PTJ5, NULL); + gpio_direction_output(GPIO_PTJ5, 1); + gpio_export(GPIO_PTJ5, 0); + + /* Lit LED11 */ + gpio_request(GPIO_PTJ7, NULL); + gpio_direction_output(GPIO_PTJ7, 1); + gpio_export(GPIO_PTJ7, 0); +#endif + /* enable USB0 port */ ctrl_outw(0x0600, 0xa40501d4); + /* enable USB1 port */ + ctrl_outw(0x0600, 0xa4050192); + /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); gpio_request(GPIO_FN_INTC_IRQ1, NULL); @@ -546,15 +632,15 @@ static int __init devices_setup(void) sh_eth_init(); if (sw & SW41_B) { - /* SVGA */ - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 600; - lcdc_info.ch[0].lcd_cfg.left_margin = 142; - lcdc_info.ch[0].lcd_cfg.right_margin = 52; - lcdc_info.ch[0].lcd_cfg.hsync_len = 96; - lcdc_info.ch[0].lcd_cfg.upper_margin = 24; - lcdc_info.ch[0].lcd_cfg.lower_margin = 2; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; + /* 720p */ + lcdc_info.ch[0].lcd_cfg.xres = 1280; + lcdc_info.ch[0].lcd_cfg.yres = 720; + lcdc_info.ch[0].lcd_cfg.left_margin = 220; + lcdc_info.ch[0].lcd_cfg.right_margin = 110; + lcdc_info.ch[0].lcd_cfg.hsync_len = 40; + lcdc_info.ch[0].lcd_cfg.upper_margin = 20; + lcdc_info.ch[0].lcd_cfg.lower_margin = 5; + lcdc_info.ch[0].lcd_cfg.vsync_len = 5; } else { /* VGA */ lcdc_info.ch[0].lcd_cfg.xres = 640; |