diff options
Diffstat (limited to 'arch/powerpc/kernel/idle_book3s.S')
-rw-r--r-- | arch/powerpc/kernel/idle_book3s.S | 1099 |
1 files changed, 146 insertions, 953 deletions
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index 4a860d3b9229..2dfbd5d5b932 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -1,995 +1,188 @@ /* - * This file contains idle entry/exit functions for POWER7, - * POWER8 and POWER9 CPUs. + * Copyright 2018, IBM Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. + * + * This file contains general idle entry/exit functions to save + * and restore stack and NVGPRs which allows C code to call idle + * states that lose GPRs, and it will return transparently with + * SRR1 wakeup reason return value. + * + * The platform / CPU caller must ensure SPRs and any other non-GPR + * state is saved and restored correctly, handle KVM, interrupts, etc. */ -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/ppc-opcode.h> -#include <asm/hw_irq.h> -#include <asm/kvm_book3s_asm.h> -#include <asm/opal.h> #include <asm/cpuidle.h> -#include <asm/exception-64s.h> -#include <asm/book3s/64/mmu-hash.h> -#include <asm/mmu.h> -#include <asm/asm-compat.h> -#include <asm/feature-fixups.h> - -#undef DEBUG - -/* - * Use unused space in the interrupt stack to save and restore - * registers for winkle support. - */ -#define _MMCR0 GPR0 -#define _SDR1 GPR3 -#define _PTCR GPR3 -#define _RPR GPR4 -#define _SPURR GPR5 -#define _PURR GPR6 -#define _TSCR GPR7 -#define _DSCR GPR8 -#define _AMOR GPR9 -#define _WORT GPR10 -#define _WORC GPR11 -#define _LPCR GPR12 - -#define PSSCR_EC_ESL_MASK_SHIFTED (PSSCR_EC | PSSCR_ESL) >> 16 - .text - -/* - * Used by threads before entering deep idle states. Saves SPRs - * in interrupt stack frame - */ -save_sprs_to_stack: - /* - * Note all register i.e per-core, per-subcore or per-thread is saved - * here since any thread in the core might wake up first - */ -BEGIN_FTR_SECTION - /* - * Note - SDR1 is dropped in Power ISA v3. Hence not restoring - * SDR1 here - */ - mfspr r3,SPRN_PTCR - std r3,_PTCR(r1) - mfspr r3,SPRN_LPCR - std r3,_LPCR(r1) -FTR_SECTION_ELSE - mfspr r3,SPRN_SDR1 - std r3,_SDR1(r1) -ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) - mfspr r3,SPRN_RPR - std r3,_RPR(r1) - mfspr r3,SPRN_SPURR - std r3,_SPURR(r1) - mfspr r3,SPRN_PURR - std r3,_PURR(r1) - mfspr r3,SPRN_TSCR - std r3,_TSCR(r1) - mfspr r3,SPRN_DSCR - std r3,_DSCR(r1) - mfspr r3,SPRN_AMOR - std r3,_AMOR(r1) - mfspr r3,SPRN_WORT - std r3,_WORT(r1) - mfspr r3,SPRN_WORC - std r3,_WORC(r1) /* - * On POWER9, there are idle states such as stop4, invoked via cpuidle, - * that lose hypervisor resources. In such cases, we need to save - * additional SPRs before entering those idle states so that they can - * be restored to their older values on wakeup from the idle state. + * Desired PSSCR in r3 * - * On POWER8, the only such deep idle state is winkle which is used - * only in the context of CPU-Hotplug, where these additional SPRs are - * reinitiazed to a sane value. Hence there is no need to save/restore - * these SPRs. + * No state will be lost regardless of wakeup mechanism (interrupt or NIA). + * + * An EC=0 type wakeup will return with a value of 0. SRESET wakeup (which can + * happen with xscom SRESET and possibly MCE) may clobber volatiles except LR, + * and must blr, to return to caller with r3 set according to caller's expected + * return code (for Book3S/64 that is SRR1). */ -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) - -power9_save_additional_sprs: - mfspr r3, SPRN_PID - mfspr r4, SPRN_LDBAR - std r3, STOP_PID(r13) - std r4, STOP_LDBAR(r13) - - mfspr r3, SPRN_FSCR - mfspr r4, SPRN_HFSCR - std r3, STOP_FSCR(r13) - std r4, STOP_HFSCR(r13) - - mfspr r3, SPRN_MMCRA - mfspr r4, SPRN_MMCR0 - std r3, STOP_MMCRA(r13) - std r4, _MMCR0(r1) - - mfspr r3, SPRN_MMCR1 - mfspr r4, SPRN_MMCR2 - std r3, STOP_MMCR1(r13) - std r4, STOP_MMCR2(r13) - blr - -power9_restore_additional_sprs: - ld r3,_LPCR(r1) - ld r4, STOP_PID(r13) - mtspr SPRN_LPCR,r3 - mtspr SPRN_PID, r4 - - ld r3, STOP_LDBAR(r13) - ld r4, STOP_FSCR(r13) - mtspr SPRN_LDBAR, r3 - mtspr SPRN_FSCR, r4 - - ld r3, STOP_HFSCR(r13) - ld r4, STOP_MMCRA(r13) - mtspr SPRN_HFSCR, r3 - mtspr SPRN_MMCRA, r4 - - ld r3, _MMCR0(r1) - ld r4, STOP_MMCR1(r13) - mtspr SPRN_MMCR0, r3 - mtspr SPRN_MMCR1, r4 - - ld r3, STOP_MMCR2(r13) - ld r4, PACA_SPRG_VDSO(r13) - mtspr SPRN_MMCR2, r3 - mtspr SPRN_SPRG3, r4 +_GLOBAL(isa300_idle_stop_noloss) + mtspr SPRN_PSSCR,r3 + PPC_STOP + li r3,0 blr /* - * Used by threads when the lock bit of core_idle_state is set. - * Threads will spin in HMT_LOW until the lock bit is cleared. - * r14 - pointer to core_idle_state - * r15 - used to load contents of core_idle_state - * r9 - used as a temporary variable + * Desired PSSCR in r3 + * + * GPRs may be lost, so they are saved here. Wakeup is by interrupt only. + * The SRESET wakeup returns to this function's caller by calling + * idle_return_gpr_loss with r3 set to desired return value. + * + * A wakeup without GPR loss may alteratively be handled as in + * isa300_idle_stop_noloss and blr directly, as an optimisation. + * + * The caller is responsible for saving/restoring SPRs, MSR, timebase, + * etc. */ - -core_idle_lock_held: - HMT_LOW -3: lwz r15,0(r14) - andis. r15,r15,PNV_CORE_IDLE_LOCK_BIT@h - bne 3b - HMT_MEDIUM - lwarx r15,0,r14 - andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h - bne- core_idle_lock_held - blr - -/* Reuse some unused pt_regs slots for AMR/IAMR/UAMOR/UAMOR */ -#define PNV_POWERSAVE_AMR _TRAP -#define PNV_POWERSAVE_IAMR _DAR -#define PNV_POWERSAVE_UAMOR _DSISR -#define PNV_POWERSAVE_AMOR RESULT +_GLOBAL(isa300_idle_stop_mayloss) + mtspr SPRN_PSSCR,r3 + std r1,PACAR1(r13) + mflr r4 + mfcr r5 + /* use stack red zone rather than a new frame for saving regs */ + std r2,-8*0(r1) + std r14,-8*1(r1) + std r15,-8*2(r1) + std r16,-8*3(r1) + std r17,-8*4(r1) + std r18,-8*5(r1) + std r19,-8*6(r1) + std r20,-8*7(r1) + std r21,-8*8(r1) + std r22,-8*9(r1) + std r23,-8*10(r1) + std r24,-8*11(r1) + std r25,-8*12(r1) + std r26,-8*13(r1) + std r27,-8*14(r1) + std r28,-8*15(r1) + std r29,-8*16(r1) + std r30,-8*17(r1) + std r31,-8*18(r1) + std r4,-8*19(r1) + std r5,-8*20(r1) + /* 168 bytes */ + PPC_STOP + b . /* catch bugs */ /* - * Pass requested state in r3: - * r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8 - * - Requested PSSCR value in POWER9 + * Desired return value in r3 + * + * The idle wakeup SRESET interrupt can call this after calling + * to return to the idle sleep function caller with r3 as the return code. * - * Address of idle handler to branch to in realmode in r4 + * This must not be used if idle was entered via a _noloss function (use + * a simple blr instead). */ -pnv_powersave_common: - /* Use r3 to pass state nap/sleep/winkle */ - /* NAP is a state loss, we create a regs frame on the - * stack, fill it up with the state we care about and - * stick a pointer to it in PACAR1. We really only - * need to save PC, some CR bits and the NV GPRs, - * but for now an interrupt frame will do. - */ - mtctr r4 - - mflr r0 - std r0,16(r1) - stdu r1,-INT_FRAME_SIZE(r1) - std r0,_LINK(r1) - std r0,_NIP(r1) - - /* We haven't lost state ... yet */ - li r0,0 - stb r0,PACA_NAPSTATELOST(r13) - - /* Continue saving state */ - SAVE_GPR(2, r1) - SAVE_NVGPRS(r1) - -BEGIN_FTR_SECTION - mfspr r4, SPRN_AMR - mfspr r5, SPRN_IAMR - mfspr r6, SPRN_UAMOR - std r4, PNV_POWERSAVE_AMR(r1) - std r5, PNV_POWERSAVE_IAMR(r1) - std r6, PNV_POWERSAVE_UAMOR(r1) -BEGIN_FTR_SECTION_NESTED(42) - mfspr r7, SPRN_AMOR - std r7, PNV_POWERSAVE_AMOR(r1) -END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42) -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) - - mfcr r5 - std r5,_CCR(r1) - std r1,PACAR1(r13) - -BEGIN_FTR_SECTION - /* - * POWER9 does not require real mode to stop, and presently does not - * set hwthread_state for KVM (threads don't share MMU context), so - * we can remain in virtual mode for this. - */ - bctr -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) - /* - * POWER8 - * Go to real mode to do the nap, as required by the architecture. - * Also, we need to be in real mode before setting hwthread_state, - * because as soon as we do that, another thread can switch - * the MMU context to the guest. - */ - LOAD_REG_IMMEDIATE(r7, MSR_IDLE) - mtmsrd r7,0 - bctr +_GLOBAL(idle_return_gpr_loss) + ld r1,PACAR1(r13) + ld r4,-8*19(r1) + ld r5,-8*20(r1) + mtlr r4 + mtcr r5 + /* + * KVM nap requires r2 to be saved, rather than just restoring it + * from PACATOC. This could be avoided for that less common case + * if KVM saved its r2. + */ + ld r2,-8*0(r1) + ld r14,-8*1(r1) + ld r15,-8*2(r1) + ld r16,-8*3(r1) + ld r17,-8*4(r1) + ld r18,-8*5(r1) + ld r19,-8*6(r1) + ld r20,-8*7(r1) + ld r21,-8*8(r1) + ld r22,-8*9(r1) + ld r23,-8*10(r1) + ld r24,-8*11(r1) + ld r25,-8*12(r1) + ld r26,-8*13(r1) + ld r27,-8*14(r1) + ld r28,-8*15(r1) + ld r29,-8*16(r1) + ld r30,-8*17(r1) + ld r31,-8*18(r1) + blr /* * This is the sequence required to execute idle instructions, as * specified in ISA v2.07 (and earlier). MSR[IR] and MSR[DR] must be 0. + * + * The 0(r1) slot is used to save r2 in isa206, so use that here. */ #define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \ /* Magic NAP/SLEEP/WINKLE mode enter sequence */ \ - std r0,0(r1); \ + std r2,0(r1); \ ptesync; \ - ld r0,0(r1); \ -236: cmpd cr0,r0,r0; \ + ld r2,0(r1); \ +236: cmpd cr0,r2,r2; \ bne 236b; \ - IDLE_INST; - - - .globl pnv_enter_arch207_idle_mode -pnv_enter_arch207_idle_mode: -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE - /* Tell KVM we're entering idle */ - li r4,KVM_HWTHREAD_IN_IDLE - /******************************************************/ - /* N O T E W E L L ! ! ! N O T E W E L L */ - /* The following store to HSTATE_HWTHREAD_STATE(r13) */ - /* MUST occur in real mode, i.e. with the MMU off, */ - /* and the MMU must stay off until we clear this flag */ - /* and test HSTATE_HWTHREAD_REQ(r13) in */ - /* pnv_powersave_wakeup in this file. */ - /* The reason is that another thread can switch the */ - /* MMU to a guest context whenever this flag is set */ - /* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on, */ - /* that would potentially cause this thread to start */ - /* executing instructions from guest memory in */ - /* hypervisor mode, leading to a host crash or data */ - /* corruption, or worse. */ - /******************************************************/ - stb r4,HSTATE_HWTHREAD_STATE(r13) -#endif - stb r3,PACA_THREAD_IDLE_STATE(r13) - cmpwi cr3,r3,PNV_THREAD_SLEEP - bge cr3,2f - IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP) - /* No return */ -2: - /* Sleep or winkle */ - lbz r7,PACA_THREAD_MASK(r13) - ld r14,PACA_CORE_IDLE_STATE_PTR(r13) - li r5,0 - beq cr3,3f - lis r5,PNV_CORE_IDLE_WINKLE_COUNT@h -3: -lwarx_loop1: - lwarx r15,0,r14 - - andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h - bnel- core_idle_lock_held - - add r15,r15,r5 /* Add if winkle */ - andc r15,r15,r7 /* Clear thread bit */ - - andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS - -/* - * If cr0 = 0, then current thread is the last thread of the core entering - * sleep. Last thread needs to execute the hardware bug workaround code if - * required by the platform. - * Make the workaround call unconditionally here. The below branch call is - * patched out when the idle states are discovered if the platform does not - * require it. - */ -.global pnv_fastsleep_workaround_at_entry -pnv_fastsleep_workaround_at_entry: - beq fastsleep_workaround_at_entry - - stwcx. r15,0,r14 - bne- lwarx_loop1 - isync - -common_enter: /* common code for all the threads entering sleep or winkle */ - bgt cr3,enter_winkle - IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP) - -fastsleep_workaround_at_entry: - oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h - stwcx. r15,0,r14 - bne- lwarx_loop1 - isync - - /* Fast sleep workaround */ - li r3,1 - li r4,1 - bl opal_config_cpu_idle_state - - /* Unlock */ - xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h - lwsync - stw r15,0(r14) - b common_enter - -enter_winkle: - bl save_sprs_to_stack - - IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE) - -/* - * r3 - PSSCR value corresponding to the requested stop state. - */ -power_enter_stop: -/* - * Check if we are executing the lite variant with ESL=EC=0 - */ - andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED - clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */ - bne .Lhandle_esl_ec_set - PPC_STOP - li r3,0 /* Since we didn't lose state, return 0 */ - std r3, PACA_REQ_PSSCR(r13) - - /* - * pnv_wakeup_noloss() expects r12 to contain the SRR1 value so - * it can determine if the wakeup reason is an HMI in - * CHECK_HMI_INTERRUPT. - * - * However, when we wakeup with ESL=0, SRR1 will not contain the wakeup - * reason, so there is no point setting r12 to SRR1. - * - * Further, we clear r12 here, so that we don't accidentally enter the - * HMI in pnv_wakeup_noloss() if the value of r12[42:45] == WAKE_HMI. - */ - li r12, 0 - b pnv_wakeup_noloss - -.Lhandle_esl_ec_set: -BEGIN_FTR_SECTION - /* - * POWER9 DD2.0 or earlier can incorrectly set PMAO when waking up after - * a state-loss idle. Saving and restoring MMCR0 over idle is a - * workaround. - */ - mfspr r4,SPRN_MMCR0 - std r4,_MMCR0(r1) -END_FTR_SECTION_IFCLR(CPU_FTR_POWER9_DD2_1) - -/* - * Check if the requested state is a deep idle state. - */ - LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) - ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) - cmpd r3,r4 - bge .Lhandle_deep_stop - PPC_STOP /* Does not return (system reset interrupt) */ - -.Lhandle_deep_stop: -/* - * Entering deep idle state. - * Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to - * stack and enter stop - */ - lbz r7,PACA_THREAD_MASK(r13) - ld r14,PACA_CORE_IDLE_STATE_PTR(r13) - -lwarx_loop_stop: - lwarx r15,0,r14 - andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h - bnel- core_idle_lock_held - andc r15,r15,r7 /* Clear thread bit */ - - stwcx. r15,0,r14 - bne- lwarx_loop_stop - isync - - bl save_sprs_to_stack - - PPC_STOP /* Does not return (system reset interrupt) */ - -/* - * Entered with MSR[EE]=0 and no soft-masked interrupts pending. - * r3 contains desired idle state (PNV_THREAD_NAP/SLEEP/WINKLE). - */ -_GLOBAL(power7_idle_insn) - /* Now check if user or arch enabled NAP mode */ - LOAD_REG_ADDR(r4, pnv_enter_arch207_idle_mode) - b pnv_powersave_common - -#define CHECK_HMI_INTERRUPT \ -BEGIN_FTR_SECTION_NESTED(66); \ - rlwinm r0,r12,45-31,0xf; /* extract wake reason field (P8) */ \ -FTR_SECTION_ELSE_NESTED(66); \ - rlwinm r0,r12,45-31,0xe; /* P7 wake reason field is 3 bits */ \ -ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ - cmpwi r0,0xa; /* Hypervisor maintenance ? */ \ - bne+ 20f; \ - /* Invoke opal call to handle hmi */ \ - ld r2,PACATOC(r13); \ - ld r1,PACAR1(r13); \ - std r3,ORIG_GPR3(r1); /* Save original r3 */ \ - li r3,0; /* NULL argument */ \ - bl hmi_exception_realmode; \ - nop; \ - ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \ -20: nop; - -/* - * Entered with MSR[EE]=0 and no soft-masked interrupts pending. - * r3 contains desired PSSCR register value. - * - * Offline (CPU unplug) case also must notify KVM that the CPU is - * idle. - */ -_GLOBAL(power9_offline_stop) -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE - /* - * Tell KVM we're entering idle. - * This does not have to be done in real mode because the P9 MMU - * is independent per-thread. Some steppings share radix/hash mode - * between threads, but in that case KVM has a barrier sync in real - * mode before and after switching between radix and hash. - */ - li r4,KVM_HWTHREAD_IN_IDLE - stb r4,HSTATE_HWTHREAD_STATE(r13) -#endif - /* fall through */ - -_GLOBAL(power9_idle_stop) - std r3, PACA_REQ_PSSCR(r13) -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE -BEGIN_FTR_SECTION - sync - lwz r5, PACA_DONT_STOP(r13) - cmpwi r5, 0 - bne 1f -END_FTR_SECTION_IFSET(CPU_FTR_P9_TM_XER_SO_BUG) -#endif - mtspr SPRN_PSSCR,r3 - LOAD_REG_ADDR(r4,power_enter_stop) - b pnv_powersave_common - /* No return */ -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE -1: - /* - * We get here when TM / thread reconfiguration bug workaround - * code wants to get the CPU into SMT4 mode, and therefore - * we are being asked not to stop. - */ - li r3, 0 - std r3, PACA_REQ_PSSCR(r13) - blr /* return 0 for wakeup cause / SRR1 value */ -#endif - -/* - * Called from machine check handler for powersave wakeups. - * Low level machine check processing has already been done. Now just - * go through the wake up path to get everything in order. - * - * r3 - The original SRR1 value. - * Original SRR[01] have been clobbered. - * MSR_RI is clear. - */ -.global pnv_powersave_wakeup_mce -pnv_powersave_wakeup_mce: - /* Set cr3 for pnv_powersave_wakeup */ - rlwinm r11,r3,47-31,30,31 - cmpwi cr3,r11,2 - - /* - * Now put the original SRR1 with SRR1_WAKEMCE_RESVD as the wake - * reason into r12, which allows reuse of the system reset wakeup - * code without being mistaken for another type of wakeup. - */ - oris r12,r3,SRR1_WAKEMCE_RESVD@h - - b pnv_powersave_wakeup - -/* - * Called from reset vector for powersave wakeups. - * cr3 - set to gt if waking up with partial/complete hypervisor state loss - * r12 - SRR1 - */ -.global pnv_powersave_wakeup -pnv_powersave_wakeup: - ld r2, PACATOC(r13) - -BEGIN_FTR_SECTION - bl pnv_restore_hyp_resource_arch300 -FTR_SECTION_ELSE - bl pnv_restore_hyp_resource_arch207 -ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) - - li r0,PNV_THREAD_RUNNING - stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */ - - mr r3,r12 - -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE - lbz r0,HSTATE_HWTHREAD_STATE(r13) - cmpwi r0,KVM_HWTHREAD_IN_KERNEL - beq 0f - li r0,KVM_HWTHREAD_IN_KERNEL - stb r0,HSTATE_HWTHREAD_STATE(r13) - /* Order setting hwthread_state vs. testing hwthread_req */ - sync -0: lbz r0,HSTATE_HWTHREAD_REQ(r13) - cmpwi r0,0 - beq 1f - b kvm_start_guest -1: -#endif - - /* Return SRR1 from power7_nap() */ - blt cr3,pnv_wakeup_noloss - b pnv_wakeup_loss + IDLE_INST; \ + b . /* catch bugs */ /* - * Check whether we have woken up with hypervisor state loss. - * If yes, restore hypervisor state and return back to link. + * Desired instruction type in r3 * - * cr3 - set to gt if waking up with partial/complete hypervisor state loss - */ -pnv_restore_hyp_resource_arch300: - /* - * Workaround for POWER9, if we lost resources, the ERAT - * might have been mixed up and needs flushing. We also need - * to reload MMCR0 (see comment above). We also need to set - * then clear bit 60 in MMCRA to ensure the PMU starts running. - */ - blt cr3,1f -BEGIN_FTR_SECTION - PPC_INVALIDATE_ERAT - ld r1,PACAR1(r13) - ld r4,_MMCR0(r1) - mtspr SPRN_MMCR0,r4 -END_FTR_SECTION_IFCLR(CPU_FTR_POWER9_DD2_1) - mfspr r4,SPRN_MMCRA - ori r4,r4,(1 << (63-60)) - mtspr SPRN_MMCRA,r4 - xori r4,r4,(1 << (63-60)) - mtspr SPRN_MMCRA,r4 -1: - /* - * POWER ISA 3. Use PSSCR to determine if we - * are waking up from deep idle state - */ - LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) - ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) - - /* - * 0-3 bits correspond to Power-Saving Level Status - * which indicates the idle state we are waking up from - */ - mfspr r5, SPRN_PSSCR - rldicl r5,r5,4,60 - li r0, 0 /* clear requested_psscr to say we're awake */ - std r0, PACA_REQ_PSSCR(r13) - cmpd cr4,r5,r4 - bge cr4,pnv_wakeup_tb_loss /* returns to caller */ - - blr /* Waking up without hypervisor state loss. */ - -/* Same calling convention as arch300 */ -pnv_restore_hyp_resource_arch207: - /* - * POWER ISA 2.07 or less. - * Check if we slept with sleep or winkle. - */ - lbz r4,PACA_THREAD_IDLE_STATE(r13) - cmpwi cr2,r4,PNV_THREAD_NAP - bgt cr2,pnv_wakeup_tb_loss /* Either sleep or Winkle */ - - /* - * We fall through here if PACA_THREAD_IDLE_STATE shows we are waking - * up from nap. At this stage CR3 shouldn't contains 'gt' since that - * indicates we are waking with hypervisor state loss from nap. - */ - bgt cr3,. - - blr /* Waking up without hypervisor state loss */ - -/* - * Called if waking up from idle state which can cause either partial or - * complete hyp state loss. - * In POWER8, called if waking up from fastsleep or winkle - * In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state + * GPRs may be lost, so they are saved here. Wakeup is by interrupt only. + * The SRESET wakeup returns to this function's caller by calling + * idle_return_gpr_loss with r3 set to desired return value. * - * r13 - PACA - * cr3 - gt if waking up with partial/complete hypervisor state loss + * A wakeup without GPR loss may alteratively be handled as in + * isa300_idle_stop_noloss and blr directly, as an optimisation. * - * If ISA300: - * cr4 - gt or eq if waking up from complete hypervisor state loss. + * The caller is responsible for saving/restoring SPRs, MSR, timebase, + * etc. * - * If ISA207: - * r4 - PACA_THREAD_IDLE_STATE + * This must be called in real-mode (MSR_IDLE). */ -pnv_wakeup_tb_loss: - ld r1,PACAR1(r13) - /* - * Before entering any idle state, the NVGPRs are saved in the stack. - * If there was a state loss, or PACA_NAPSTATELOST was set, then the - * NVGPRs are restored. If we are here, it is likely that state is lost, - * but not guaranteed -- neither ISA207 nor ISA300 tests to reach - * here are the same as the test to restore NVGPRS: - * PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300, - * and SRR1 test for restoring NVGPRs. - * - * We are about to clobber NVGPRs now, so set NAPSTATELOST to - * guarantee they will always be restored. This might be tightened - * with careful reading of specs (particularly for ISA300) but this - * is already a slow wakeup path and it's simpler to be safe. - */ - li r0,1 - stb r0,PACA_NAPSTATELOST(r13) - - /* - * - * Save SRR1 and LR in NVGPRs as they might be clobbered in - * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required - * to determine the wakeup reason if we branch to kvm_start_guest. LR - * is required to return back to reset vector after hypervisor state - * restore is complete. - */ - mr r19,r12 - mr r18,r4 - mflr r17 -BEGIN_FTR_SECTION - CHECK_HMI_INTERRUPT -END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) - - ld r14,PACA_CORE_IDLE_STATE_PTR(r13) - lbz r7,PACA_THREAD_MASK(r13) - - /* - * Take the core lock to synchronize against other threads. - * - * Lock bit is set in one of the 2 cases- - * a. In the sleep/winkle enter path, the last thread is executing - * fastsleep workaround code. - * b. In the wake up path, another thread is executing fastsleep - * workaround undo code or resyncing timebase or restoring context - * In either case loop until the lock bit is cleared. - */ -1: - lwarx r15,0,r14 - andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h - bnel- core_idle_lock_held - oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h - stwcx. r15,0,r14 - bne- 1b - isync - - andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS - cmpwi cr2,r9,0 - - /* - * At this stage - * cr2 - eq if first thread to wakeup in core - * cr3- gt if waking up with partial/complete hypervisor state loss - * ISA300: - * cr4 - gt or eq if waking up from complete hypervisor state loss. - */ - -BEGIN_FTR_SECTION - /* - * Were we in winkle? - * If yes, check if all threads were in winkle, decrement our - * winkle count, set all thread winkle bits if all were in winkle. - * Check if our thread has a winkle bit set, and set cr4 accordingly - * (to match ISA300, above). Pseudo-code for core idle state - * transitions for ISA207 is as follows (everything happens atomically - * due to store conditional and/or lock bit): - * - * nap_idle() { } - * nap_wake() { } - * - * sleep_idle() - * { - * core_idle_state &= ~thread_in_core - * } - * - * sleep_wake() - * { - * bool first_in_core, first_in_subcore; - * - * first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0; - * first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0; - * - * core_idle_state |= thread_in_core; - * } - * - * winkle_idle() - * { - * core_idle_state &= ~thread_in_core; - * core_idle_state += 1 << WINKLE_COUNT_SHIFT; - * } - * - * winkle_wake() - * { - * bool first_in_core, first_in_subcore, winkle_state_lost; - * - * first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0; - * first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0; - * - * core_idle_state |= thread_in_core; - * - * if ((core_idle_state & WINKLE_MASK) == (8 << WINKLE_COUNT_SIHFT)) - * core_idle_state |= THREAD_WINKLE_BITS; - * core_idle_state -= 1 << WINKLE_COUNT_SHIFT; - * - * winkle_state_lost = core_idle_state & - * (thread_in_core << WINKLE_THREAD_SHIFT); - * core_idle_state &= ~(thread_in_core << WINKLE_THREAD_SHIFT); - * } - * - */ - cmpwi r18,PNV_THREAD_WINKLE +_GLOBAL(isa206_idle_insn_mayloss) + std r1,PACAR1(r13) + mflr r4 + mfcr r5 + /* use stack red zone rather than a new frame for saving regs */ + std r2,-8*0(r1) + std r14,-8*1(r1) + std r15,-8*2(r1) + std r16,-8*3(r1) + std r17,-8*4(r1) + std r18,-8*5(r1) + std r19,-8*6(r1) + std r20,-8*7(r1) + std r21,-8*8(r1) + std r22,-8*9(r1) + std r23,-8*10(r1) + std r24,-8*11(r1) + std r25,-8*12(r1) + std r26,-8*13(r1) + std r27,-8*14(r1) + std r28,-8*15(r1) + std r29,-8*16(r1) + std r30,-8*17(r1) + std r31,-8*18(r1) + std r4,-8*19(r1) + std r5,-8*20(r1) + cmpwi r3,PNV_THREAD_NAP + bne 1f + IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP) +1: cmpwi r3,PNV_THREAD_SLEEP bne 2f - andis. r9,r15,PNV_CORE_IDLE_WINKLE_COUNT_ALL_BIT@h - subis r15,r15,PNV_CORE_IDLE_WINKLE_COUNT@h - beq 2f - ori r15,r15,PNV_CORE_IDLE_THREAD_WINKLE_BITS /* all were winkle */ -2: - /* Shift thread bit to winkle mask, then test if this thread is set, - * and remove it from the winkle bits */ - slwi r8,r7,8 - and r8,r8,r15 - andc r15,r15,r8 - cmpwi cr4,r8,1 /* cr4 will be gt if our bit is set, lt if not */ - - lbz r4,PACA_SUBCORE_SIBLING_MASK(r13) - and r4,r4,r15 - cmpwi r4,0 /* Check if first in subcore */ - - or r15,r15,r7 /* Set thread bit */ - beq first_thread_in_subcore -END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) - - or r15,r15,r7 /* Set thread bit */ - beq cr2,first_thread_in_core - - /* Not first thread in core or subcore to wake up */ - b clear_lock - -first_thread_in_subcore: - /* - * If waking up from sleep, subcore state is not lost. Hence - * skip subcore state restore - */ - blt cr4,subcore_state_restored - - /* Restore per-subcore state */ - ld r4,_SDR1(r1) - mtspr SPRN_SDR1,r4 - - ld r4,_RPR(r1) - mtspr SPRN_RPR,r4 - ld r4,_AMOR(r1) - mtspr SPRN_AMOR,r4 - -subcore_state_restored: - /* - * Check if the thread is also the first thread in the core. If not, - * skip to clear_lock. - */ - bne cr2,clear_lock - -first_thread_in_core: - - /* - * First thread in the core waking up from any state which can cause - * partial or complete hypervisor state loss. It needs to - * call the fastsleep workaround code if the platform requires it. - * Call it unconditionally here. The below branch instruction will - * be patched out if the platform does not have fastsleep or does not - * require the workaround. Patching will be performed during the - * discovery of idle-states. - */ -.global pnv_fastsleep_workaround_at_exit -pnv_fastsleep_workaround_at_exit: - b fastsleep_workaround_at_exit - -timebase_resync: - /* - * Use cr3 which indicates that we are waking up with atleast partial - * hypervisor state loss to determine if TIMEBASE RESYNC is needed. - */ - ble cr3,.Ltb_resynced - /* Time base re-sync */ - bl opal_resync_timebase; - /* - * If waking up from sleep (POWER8), per core state - * is not lost, skip to clear_lock. - */ -.Ltb_resynced: - blt cr4,clear_lock - - /* - * First thread in the core to wake up and its waking up with - * complete hypervisor state loss. Restore per core hypervisor - * state. - */ -BEGIN_FTR_SECTION - ld r4,_PTCR(r1) - mtspr SPRN_PTCR,r4 - ld r4,_RPR(r1) - mtspr SPRN_RPR,r4 - ld r4,_AMOR(r1) - mtspr SPRN_AMOR,r4 -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) - - ld r4,_TSCR(r1) - mtspr SPRN_TSCR,r4 - ld r4,_WORC(r1) - mtspr SPRN_WORC,r4 - -clear_lock: - xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h - lwsync - stw r15,0(r14) - -common_exit: - /* - * Common to all threads. - * - * If waking up from sleep, hypervisor state is not lost. Hence - * skip hypervisor state restore. - */ - blt cr4,hypervisor_state_restored - - /* Waking up from winkle */ - -BEGIN_MMU_FTR_SECTION - b no_segments -END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) - /* Restore SLB from PACA */ - ld r8,PACA_SLBSHADOWPTR(r13) - - .rept SLB_NUM_BOLTED - li r3, SLBSHADOW_SAVEAREA - LDX_BE r5, r8, r3 - addi r3, r3, 8 - LDX_BE r6, r8, r3 - andis. r7,r5,SLB_ESID_V@h - beq 1f - slbmte r6,r5 -1: addi r8,r8,16 - .endr -no_segments: - - /* Restore per thread state */ - - ld r4,_SPURR(r1) - mtspr SPRN_SPURR,r4 - ld r4,_PURR(r1) - mtspr SPRN_PURR,r4 - ld r4,_DSCR(r1) - mtspr SPRN_DSCR,r4 - ld r4,_WORT(r1) - mtspr SPRN_WORT,r4 - - /* Call cur_cpu_spec->cpu_restore() */ - LOAD_REG_ADDR(r4, cur_cpu_spec) - ld r4,0(r4) - ld r12,CPU_SPEC_RESTORE(r4) -#ifdef PPC64_ELF_ABI_v1 - ld r12,0(r12) -#endif - mtctr r12 - bctrl - -/* - * On POWER9, we can come here on wakeup from a cpuidle stop state. - * Hence restore the additional SPRs to the saved value. - * - * On POWER8, we come here only on winkle. Since winkle is used - * only in the case of CPU-Hotplug, we don't need to restore - * the additional SPRs. - */ -BEGIN_FTR_SECTION - bl power9_restore_additional_sprs -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) -hypervisor_state_restored: - - mr r12,r19 - mtlr r17 - blr /* return to pnv_powersave_wakeup */ - -fastsleep_workaround_at_exit: - li r3,1 - li r4,0 - bl opal_config_cpu_idle_state - b timebase_resync - -/* - * R3 here contains the value that will be returned to the caller - * of power7_nap. - * R12 contains SRR1 for CHECK_HMI_INTERRUPT. - */ -.global pnv_wakeup_loss -pnv_wakeup_loss: - ld r1,PACAR1(r13) -BEGIN_FTR_SECTION - CHECK_HMI_INTERRUPT -END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) - REST_NVGPRS(r1) - REST_GPR(2, r1) - -BEGIN_FTR_SECTION - /* These regs were saved in pnv_powersave_common() */ - ld r4, PNV_POWERSAVE_AMR(r1) - ld r5, PNV_POWERSAVE_IAMR(r1) - ld r6, PNV_POWERSAVE_UAMOR(r1) - mtspr SPRN_AMR, r4 - mtspr SPRN_IAMR, r5 - mtspr SPRN_UAMOR, r6 -BEGIN_FTR_SECTION_NESTED(42) - ld r7, PNV_POWERSAVE_AMOR(r1) - mtspr SPRN_AMOR, r7 -END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42) - /* - * We don't need an isync here after restoring IAMR because the upcoming - * mtmsrd is execution synchronizing. - */ -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) - - ld r4,PACAKMSR(r13) - ld r5,_LINK(r1) - ld r6,_CCR(r1) - addi r1,r1,INT_FRAME_SIZE - mtlr r5 - mtcr r6 - mtmsrd r4 - blr + IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP) +2: IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE) -/* - * R3 here contains the value that will be returned to the caller - * of power7_nap. - * R12 contains SRR1 for CHECK_HMI_INTERRUPT. - */ -pnv_wakeup_noloss: - lbz r0,PACA_NAPSTATELOST(r13) - cmpwi r0,0 - bne pnv_wakeup_loss - ld r1,PACAR1(r13) -BEGIN_FTR_SECTION - CHECK_HMI_INTERRUPT -END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) - ld r4,PACAKMSR(r13) - ld r5,_NIP(r1) - ld r6,_CCR(r1) - addi r1,r1,INT_FRAME_SIZE - mtlr r5 - mtcr r6 - mtmsrd r4 - blr |