diff options
Diffstat (limited to 'arch/mips/sgi-ip27')
-rw-r--r-- | arch/mips/sgi-ip27/ip27-irq.c | 191 |
1 files changed, 84 insertions, 107 deletions
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 710a59764b01..37be04975831 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -12,22 +12,20 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/bitops.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/irq_cpu.h> -#include <asm/pci/bridge.h> #include <asm/sn/addrs.h> #include <asm/sn/agent.h> #include <asm/sn/arch.h> #include <asm/sn/hub.h> #include <asm/sn/intr.h> +#include <asm/sn/irq_alloc.h> struct hub_irq_data { - struct bridge_controller *bc; u64 *irq_mask[2]; cpuid_t cpu; - int bit; - int pin; }; static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT); @@ -54,7 +52,7 @@ static void enable_hub_irq(struct irq_data *d) struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); - set_bit(hd->bit, mask); + set_bit(d->hwirq, mask); __raw_writeq(mask[0], hd->irq_mask[0]); __raw_writeq(mask[1], hd->irq_mask[1]); } @@ -64,72 +62,11 @@ static void disable_hub_irq(struct irq_data *d) struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); - clear_bit(hd->bit, mask); + clear_bit(d->hwirq, mask); __raw_writeq(mask[0], hd->irq_mask[0]); __raw_writeq(mask[1], hd->irq_mask[1]); } -static unsigned int startup_bridge_irq(struct irq_data *d) -{ - struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); - struct bridge_controller *bc; - nasid_t nasid; - u32 device; - int pin; - - if (!hd) - return -EINVAL; - - pin = hd->pin; - bc = hd->bc; - - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu)); - bridge_write(bc, b_int_addr[pin].addr, - (0x20000 | hd->bit | (nasid << 8))); - bridge_set(bc, b_int_enable, (1 << pin)); - bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */ - - /* - * Enable sending of an interrupt clear packt to the hub on a high to - * low transition of the interrupt pin. - * - * IRIX sets additional bits in the address which are documented as - * reserved in the bridge docs. - */ - bridge_set(bc, b_int_mode, (1UL << pin)); - - /* - * We assume the bridge to have a 1:1 mapping between devices - * (slots) and intr pins. - */ - device = bridge_read(bc, b_int_device); - device &= ~(7 << (pin*3)); - device |= (pin << (pin*3)); - bridge_write(bc, b_int_device, device); - - bridge_read(bc, b_wid_tflush); - - enable_hub_irq(d); - - return 0; /* Never anything pending. */ -} - -static void shutdown_bridge_irq(struct irq_data *d) -{ - struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); - struct bridge_controller *bc; - int pin = hd->pin; - - if (!hd) - return; - - disable_hub_irq(d); - - bc = hd->bc; - bridge_clr(bc, b_int_enable, (1 << pin)); - bridge_read(bc, b_wid_tflush); -} - static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) { nasid_t nasid; @@ -145,9 +82,6 @@ static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B); hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B); } - - /* Make sure it's not already pending when we connect it. */ - REMOTE_HUB_CLR_INTR(nasid, hd->bit); } static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask, @@ -164,7 +98,7 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask, setup_hub_mask(hd, mask); if (irqd_is_started(d)) - startup_bridge_irq(d); + enable_hub_irq(d); irq_data_update_effective_affinity(d, cpumask_of(hd->cpu)); @@ -173,20 +107,22 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask, static struct irq_chip hub_irq_type = { .name = "HUB", - .irq_startup = startup_bridge_irq, - .irq_shutdown = shutdown_bridge_irq, .irq_mask = disable_hub_irq, .irq_unmask = enable_hub_irq, .irq_set_affinity = set_affinity_hub_irq, }; -int request_bridge_irq(struct bridge_controller *bc, int pin) +static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) { + struct irq_alloc_info *info = arg; struct hub_irq_data *hd; struct hub_data *hub; struct irq_desc *desc; int swlevel; - int irq; + + if (nr_irqs > 1 || !info) + return -EINVAL; hd = kzalloc(sizeof(*hd), GFP_KERNEL); if (!hd) @@ -197,46 +133,41 @@ int request_bridge_irq(struct bridge_controller *bc, int pin) kfree(hd); return -EAGAIN; } - irq = swlevel + IP27_HUB_IRQ_BASE; - - hd->bc = bc; - hd->bit = swlevel; - hd->pin = pin; - irq_set_chip_data(irq, hd); + irq_domain_set_info(domain, virq, swlevel, &hub_irq_type, hd, + handle_level_irq, NULL, NULL); /* use CPU connected to nearest hub */ - hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid)); + hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid)); setup_hub_mask(hd, &hub->h_cpus); - desc = irq_to_desc(irq); - desc->irq_common_data.node = bc->nasid; + /* Make sure it's not already pending when we connect it. */ + REMOTE_HUB_CLR_INTR(info->nasid, swlevel); + + desc = irq_to_desc(virq); + desc->irq_common_data.node = info->nasid; cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus); - return irq; + return 0; } -void ip27_hub_irq_init(void) +static void hub_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) { - int i; + struct irq_data *irqd; - for (i = IP27_HUB_IRQ_BASE; - i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++) - irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq); - - /* - * Some interrupts are reserved by hardware or by software convention. - * Mark these as reserved right away so they won't be used accidentally - * later. - */ - for (i = 0; i <= BASE_PCI_IRQ; i++) - set_bit(i, hub_irq_map); - - set_bit(IP_PEND0_6_63, hub_irq_map); + if (nr_irqs > 1) + return; - for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) - set_bit(i, hub_irq_map); + irqd = irq_domain_get_irq_data(domain, virq); + if (irqd && irqd->chip_data) + kfree(irqd->chip_data); } +static const struct irq_domain_ops hub_domain_ops = { + .alloc = hub_domain_alloc, + .free = hub_domain_free, +}; + /* * This code is unnecessarily complex, because we do * intr enabling. Basically, once we grab the set of intrs we need @@ -253,7 +184,9 @@ static void ip27_do_irq_mask0(struct irq_desc *desc) { cpuid_t cpu = smp_processor_id(); unsigned long *mask = per_cpu(irq_enable_mask, cpu); + struct irq_domain *domain; u64 pend0; + int irq; /* copied from Irix intpend0() */ pend0 = LOCAL_HUB_L(PI_INT_PEND0); @@ -277,7 +210,14 @@ static void ip27_do_irq_mask0(struct irq_desc *desc) generic_smp_call_function_interrupt(); } else #endif - generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE); + { + domain = irq_desc_get_handler_data(desc); + irq = irq_linear_revmap(domain, __ffs(pend0)); + if (irq) + generic_handle_irq(irq); + else + spurious_interrupt(); + } LOCAL_HUB_L(PI_INT_PEND0); } @@ -286,7 +226,9 @@ static void ip27_do_irq_mask1(struct irq_desc *desc) { cpuid_t cpu = smp_processor_id(); unsigned long *mask = per_cpu(irq_enable_mask, cpu); + struct irq_domain *domain; u64 pend1; + int irq; /* copied from Irix intpend0() */ pend1 = LOCAL_HUB_L(PI_INT_PEND1); @@ -295,7 +237,12 @@ static void ip27_do_irq_mask1(struct irq_desc *desc) if (!pend1) return; - generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64); + domain = irq_desc_get_handler_data(desc); + irq = irq_linear_revmap(domain, __ffs(pend1) + 64); + if (irq) + generic_handle_irq(irq); + else + spurious_interrupt(); LOCAL_HUB_L(PI_INT_PEND1); } @@ -326,11 +273,41 @@ void install_ipi(void) void __init arch_init_irq(void) { + struct irq_domain *domain; + struct fwnode_handle *fn; + int i; + mips_cpu_irq_init(); - ip27_hub_irq_init(); + + /* + * Some interrupts are reserved by hardware or by software convention. + * Mark these as reserved right away so they won't be used accidentally + * later. + */ + for (i = 0; i <= BASE_PCI_IRQ; i++) + set_bit(i, hub_irq_map); + + set_bit(IP_PEND0_6_63, hub_irq_map); + + for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) + set_bit(i, hub_irq_map); + + fn = irq_domain_alloc_named_fwnode("HUB"); + WARN_ON(fn == NULL); + if (!fn) + return; + domain = irq_domain_create_linear(fn, IP27_HUB_IRQ_COUNT, + &hub_domain_ops, NULL); + WARN_ON(domain == NULL); + if (!domain) + return; + + irq_set_default_host(domain); irq_set_percpu_devid(IP27_HUB_PEND0_IRQ); - irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0); + irq_set_chained_handler_and_data(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0, + domain); irq_set_percpu_devid(IP27_HUB_PEND1_IRQ); - irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1); + irq_set_chained_handler_and_data(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1, + domain); } |