1 files changed, 0 insertions, 216 deletions
diff --git a/arch/mips/pmcs-msp71xx/gpio.c b/arch/mips/pmcs-msp71xx/gpio.c
deleted file mode 100644
index aaccbe524386..000000000000
--- a/arch/mips/pmcs-msp71xx/gpio.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
- * types of registers. The data register sets the output level when in output
- * mode and when in input mode will contain the value at the input. The config
- * register sets the various modes for each gpio.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * @author Patrick Glass <patrickglass@gmail.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#define MSP71XX_CFG_OFFSET(gpio)	(4 * (gpio))
-#define CONF_MASK			0x0F
-#define MSP71XX_GPIO_INPUT		0x01
-#define MSP71XX_GPIO_OUTPUT		0x08
-
-#define MSP71XX_GPIO_BASE		0x0B8400000L
-
-#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip)
-
-static spinlock_t gpio_lock;
-
-/*
- * struct msp71xx_gpio_chip - container for gpio chip and registers
- * @chip: chip structure for the specified gpio bank
- * @data_reg: register for reading and writing the gpio pin value
- * @config_reg: register to set the mode for the gpio pin bank
- * @out_drive_reg: register to set the output drive mode for the gpio pin bank
- */
-struct msp71xx_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem *data_reg;
-	void __iomem *config_reg;
-	void __iomem *out_drive_reg;
-};
-
-/*
- * msp71xx_gpio_get() - return the chip's gpio value
- * @chip: chip structure which controls the specified gpio
- * @offset: gpio whose value will be returned
- *
- * It will return 0 if gpio value is low and other if high.
- */
-static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
-
-	return __raw_readl(msp_chip->data_reg) & (1 << offset);
-}
-
-/*
- * msp71xx_gpio_set() - set the output value for the gpio
- * @chip: chip structure who controls the specified gpio
- * @offset: gpio whose value will be assigned
- * @value: logic level to assign to the gpio initially
- *
- * This will set the gpio bit specified to the desired value. It will set the
- * gpio pin low if value is 0 otherwise it will be high.
- */
-static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
-	unsigned long flags;
-	u32 data;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	data = __raw_readl(msp_chip->data_reg);
-	if (value)
-		data |= (1 << offset);
-	else
-		data &= ~(1 << offset);
-	__raw_writel(data, msp_chip->data_reg);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-/*
- * msp71xx_set_gpio_mode() - declare the mode for a gpio
- * @chip: chip structure which controls the specified gpio
- * @offset: gpio whose value will be assigned
- * @mode: desired configuration for the gpio (see datasheet)
- *
- * It will set the gpio pin config to the @mode value passed in.
- */
-static int msp71xx_set_gpio_mode(struct gpio_chip *chip,
-				 unsigned offset, int mode)
-{
-	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
-	const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset);
-	unsigned long flags;
-	u32 cfg;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	cfg = __raw_readl(msp_chip->config_reg);
-	cfg &= ~(CONF_MASK << bit_offset);
-	cfg |= (mode << bit_offset);
-	__raw_writel(cfg, msp_chip->config_reg);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return 0;
-}
-
-/*
- * msp71xx_direction_output() - declare the direction mode for a gpio
- * @chip: chip structure which controls the specified gpio
- * @offset: gpio whose value will be assigned
- * @value: logic level to assign to the gpio initially
- *
- * This call will set the mode for the @gpio to output. It will set the
- * gpio pin low if value is 0 otherwise it will be high.
- */
-static int msp71xx_direction_output(struct gpio_chip *chip,
-				    unsigned offset, int value)
-{
-	msp71xx_gpio_set(chip, offset, value);
-
-	return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT);
-}
-
-/*
- * msp71xx_direction_input() - declare the direction mode for a gpio
- * @chip: chip structure which controls the specified gpio
- * @offset: gpio whose to which the value will be assigned
- *
- * This call will set the mode for the @gpio to input.
- */
-static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT);
-}
-
-/*
- * msp71xx_set_output_drive() - declare the output drive for the gpio line
- * @gpio: gpio pin whose output drive you wish to modify
- * @value: zero for active drain 1 for open drain drive
- *
- * This call will set the output drive mode for the @gpio to output.
- */
-int msp71xx_set_output_drive(unsigned gpio, int value)
-{
-	unsigned long flags;
-	u32 data;
-
-	if (gpio > 15 || gpio < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
-	if (value)
-		data |= (1 << gpio);
-	else
-		data &= ~(1 << gpio);
-	__raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(msp71xx_set_output_drive);
-
-#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \
-{ \
-	.chip = { \
-		.label		  = name, \
-		.direction_input  = msp71xx_direction_input, \
-		.direction_output = msp71xx_direction_output, \
-		.get		  = msp71xx_gpio_get, \
-		.set		  = msp71xx_gpio_set, \
-		.base		  = base_gpio, \
-		.ngpio		  = num_gpio \
-	}, \
-	.data_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + dr), \
-	.config_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + cr), \
-	.out_drive_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \
-}
-
-/*
- * struct msp71xx_gpio_banks[] - container array of gpio banks
- * @chip: chip structure for the specified gpio bank
- * @data_reg: register for reading and writing the gpio pin value
- * @config_reg: register to set the mode for the gpio pin bank
- *
- * This array structure defines the gpio banks for the PMC MIPS Processor.
- * We specify the bank name, the data register, the config register, base
- * starting gpio number, and the number of gpios exposed by the bank.
- */
-static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = {
-
-	MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2),
-	MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4),
-	MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4),
-	MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6),
-};
-
-void __init msp71xx_init_gpio(void)
-{
-	int i;
-
-	spin_lock_init(&gpio_lock);
-
-	for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++)
-		gpiochip_add(&msp71xx_gpio_banks[i].chip);
-}