summaryrefslogtreecommitdiffstats
path: root/arch/mips/lib/memcpy.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/lib/memcpy.S')
-rw-r--r--arch/mips/lib/memcpy.S416
1 files changed, 277 insertions, 139 deletions
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index c5c40dad0bbf..c17ef80cf65a 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -10,6 +10,7 @@
* Copyright (C) 2002 Broadcom, Inc.
* memcpy/copy_user author: Mark Vandevoorde
* Copyright (C) 2007 Maciej W. Rozycki
+ * Copyright (C) 2014 Imagination Technologies Ltd.
*
* Mnemonic names for arguments to memcpy/__copy_user
*/
@@ -85,11 +86,51 @@
* they're not protected.
*/
-#define EXC(inst_reg,addr,handler) \
-9: inst_reg, addr; \
- .section __ex_table,"a"; \
- PTR 9b, handler; \
- .previous
+/* Instruction type */
+#define LD_INSN 1
+#define ST_INSN 2
+/* Pretech type */
+#define SRC_PREFETCH 1
+#define DST_PREFETCH 2
+#define LEGACY_MODE 1
+#define EVA_MODE 2
+#define USEROP 1
+#define KERNELOP 2
+
+/*
+ * Wrapper to add an entry in the exception table
+ * in case the insn causes a memory exception.
+ * Arguments:
+ * insn : Load/store instruction
+ * type : Instruction type
+ * reg : Register
+ * addr : Address
+ * handler : Exception handler
+ */
+
+#define EXC(insn, type, reg, addr, handler) \
+ .if \mode == LEGACY_MODE; \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR 9b, handler; \
+ .previous; \
+ /* This is assembled in EVA mode */ \
+ .else; \
+ /* If loading from user or storing to user */ \
+ .if ((\from == USEROP) && (type == LD_INSN)) || \
+ ((\to == USEROP) && (type == ST_INSN)); \
+9: __BUILD_EVA_INSN(insn##e, reg, addr); \
+ .section __ex_table,"a"; \
+ PTR 9b, handler; \
+ .previous; \
+ .else; \
+ /* \
+ * Still in EVA, but no need for \
+ * exception handler or EVA insn \
+ */ \
+ insn reg, addr; \
+ .endif; \
+ .endif
/*
* Only on the 64-bit kernel we can made use of 64-bit registers.
@@ -100,12 +141,13 @@
#ifdef USE_DOUBLE
-#define LOAD ld
-#define LOADL ldl
-#define LOADR ldr
-#define STOREL sdl
-#define STORER sdr
-#define STORE sd
+#define LOADK ld /* No exception */
+#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler)
+#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler)
+#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler)
+#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler)
+#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler)
+#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler)
#define ADD daddu
#define SUB dsubu
#define SRL dsrl
@@ -136,12 +178,13 @@
#else
-#define LOAD lw
-#define LOADL lwl
-#define LOADR lwr
-#define STOREL swl
-#define STORER swr
-#define STORE sw
+#define LOADK lw /* No exception */
+#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler)
+#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler)
+#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler)
+#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler)
+#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler)
+#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler)
#define ADD addu
#define SUB subu
#define SRL srl
@@ -154,6 +197,33 @@
#endif /* USE_DOUBLE */
+#define LOADB(reg, addr, handler) EXC(lb, LD_INSN, reg, addr, handler)
+#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler)
+
+#define _PREF(hint, addr, type) \
+ .if \mode == LEGACY_MODE; \
+ PREF(hint, addr); \
+ .else; \
+ .if ((\from == USEROP) && (type == SRC_PREFETCH)) || \
+ ((\to == USEROP) && (type == DST_PREFETCH)); \
+ /* \
+ * PREFE has only 9 bits for the offset \
+ * compared to PREF which has 16, so it may \
+ * need to use the $at register but this \
+ * register should remain intact because it's \
+ * used later on. Therefore use $v1. \
+ */ \
+ .set at=v1; \
+ PREFE(hint, addr); \
+ .set noat; \
+ .else; \
+ PREF(hint, addr); \
+ .endif; \
+ .endif
+
+#define PREFS(hint, addr) _PREF(hint, addr, SRC_PREFETCH)
+#define PREFD(hint, addr) _PREF(hint, addr, DST_PREFETCH)
+
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define LDFIRST LOADR
#define LDREST LOADL
@@ -182,27 +252,23 @@
.set at=v1
#endif
-/*
- * t6 is used as a flag to note inatomic mode.
- */
-LEAF(__copy_user_inatomic)
- b __copy_user_common
- li t6, 1
- END(__copy_user_inatomic)
-
-/*
- * A combined memcpy/__copy_user
- * __copy_user sets len to 0 for success; else to an upper bound of
- * the number of uncopied bytes.
- * memcpy sets v0 to dst.
- */
.align 5
-LEAF(memcpy) /* a0=dst a1=src a2=len */
- move v0, dst /* return value */
-.L__memcpy:
-FEXPORT(__copy_user)
- li t6, 0 /* not inatomic */
-__copy_user_common:
+
+ /*
+ * Macro to build the __copy_user common code
+ * Arguements:
+ * mode : LEGACY_MODE or EVA_MODE
+ * from : Source operand. USEROP or KERNELOP
+ * to : Destination operand. USEROP or KERNELOP
+ */
+ .macro __BUILD_COPY_USER mode, from, to
+
+ /* initialize __memcpy if this the first time we execute this macro */
+ .ifnotdef __memcpy
+ .set __memcpy, 1
+ .hidden __memcpy /* make sure it does not leak */
+ .endif
+
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
@@ -217,94 +283,94 @@ __copy_user_common:
*
* If len < NBYTES use byte operations.
*/
- PREF( 0, 0(src) )
- PREF( 1, 0(dst) )
+ PREFS( 0, 0(src) )
+ PREFD( 1, 0(dst) )
sltu t2, len, NBYTES
and t1, dst, ADDRMASK
- PREF( 0, 1*32(src) )
- PREF( 1, 1*32(dst) )
- bnez t2, .Lcopy_bytes_checklen
+ PREFS( 0, 1*32(src) )
+ PREFD( 1, 1*32(dst) )
+ bnez t2, .Lcopy_bytes_checklen\@
and t0, src, ADDRMASK
- PREF( 0, 2*32(src) )
- PREF( 1, 2*32(dst) )
- bnez t1, .Ldst_unaligned
+ PREFS( 0, 2*32(src) )
+ PREFD( 1, 2*32(dst) )
+ bnez t1, .Ldst_unaligned\@
nop
- bnez t0, .Lsrc_unaligned_dst_aligned
+ bnez t0, .Lsrc_unaligned_dst_aligned\@
/*
* use delay slot for fall-through
* src and dst are aligned; need to compute rem
*/
-.Lboth_aligned:
+.Lboth_aligned\@:
SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
- beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES
+ beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES
and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES)
- PREF( 0, 3*32(src) )
- PREF( 1, 3*32(dst) )
+ PREFS( 0, 3*32(src) )
+ PREFD( 1, 3*32(dst) )
.align 4
1:
R10KCBARRIER(0(ra))
-EXC( LOAD t0, UNIT(0)(src), .Ll_exc)
-EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy)
-EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy)
-EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy)
+ LOAD(t0, UNIT(0)(src), .Ll_exc\@)
+ LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@)
+ LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@)
+ LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@)
SUB len, len, 8*NBYTES
-EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy)
-EXC( LOAD t7, UNIT(5)(src), .Ll_exc_copy)
-EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p8u)
-EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p7u)
-EXC( LOAD t0, UNIT(6)(src), .Ll_exc_copy)
-EXC( LOAD t1, UNIT(7)(src), .Ll_exc_copy)
+ LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@)
+ LOAD(t7, UNIT(5)(src), .Ll_exc_copy\@)
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p8u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p7u\@)
+ LOAD(t0, UNIT(6)(src), .Ll_exc_copy\@)
+ LOAD(t1, UNIT(7)(src), .Ll_exc_copy\@)
ADD src, src, 8*NBYTES
ADD dst, dst, 8*NBYTES
-EXC( STORE t2, UNIT(-6)(dst), .Ls_exc_p6u)
-EXC( STORE t3, UNIT(-5)(dst), .Ls_exc_p5u)
-EXC( STORE t4, UNIT(-4)(dst), .Ls_exc_p4u)
-EXC( STORE t7, UNIT(-3)(dst), .Ls_exc_p3u)
-EXC( STORE t0, UNIT(-2)(dst), .Ls_exc_p2u)
-EXC( STORE t1, UNIT(-1)(dst), .Ls_exc_p1u)
- PREF( 0, 8*32(src) )
- PREF( 1, 8*32(dst) )
+ STORE(t2, UNIT(-6)(dst), .Ls_exc_p6u\@)
+ STORE(t3, UNIT(-5)(dst), .Ls_exc_p5u\@)
+ STORE(t4, UNIT(-4)(dst), .Ls_exc_p4u\@)
+ STORE(t7, UNIT(-3)(dst), .Ls_exc_p3u\@)
+ STORE(t0, UNIT(-2)(dst), .Ls_exc_p2u\@)
+ STORE(t1, UNIT(-1)(dst), .Ls_exc_p1u\@)
+ PREFS( 0, 8*32(src) )
+ PREFD( 1, 8*32(dst) )
bne len, rem, 1b
nop
/*
* len == rem == the number of bytes left to copy < 8*NBYTES
*/
-.Lcleanup_both_aligned:
- beqz len, .Ldone
+.Lcleanup_both_aligned\@:
+ beqz len, .Ldone\@
sltu t0, len, 4*NBYTES
- bnez t0, .Lless_than_4units
+ bnez t0, .Lless_than_4units\@
and rem, len, (NBYTES-1) # rem = len % NBYTES
/*
* len >= 4*NBYTES
*/
-EXC( LOAD t0, UNIT(0)(src), .Ll_exc)
-EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy)
-EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy)
-EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy)
+ LOAD( t0, UNIT(0)(src), .Ll_exc\@)
+ LOAD( t1, UNIT(1)(src), .Ll_exc_copy\@)
+ LOAD( t2, UNIT(2)(src), .Ll_exc_copy\@)
+ LOAD( t3, UNIT(3)(src), .Ll_exc_copy\@)
SUB len, len, 4*NBYTES
ADD src, src, 4*NBYTES
R10KCBARRIER(0(ra))
-EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u)
-EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u)
-EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u)
-EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u)
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
+ STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
+ STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
.set reorder /* DADDI_WAR */
ADD dst, dst, 4*NBYTES
- beqz len, .Ldone
+ beqz len, .Ldone\@
.set noreorder
-.Lless_than_4units:
+.Lless_than_4units\@:
/*
* rem = len % NBYTES
*/
- beq rem, len, .Lcopy_bytes
+ beq rem, len, .Lcopy_bytes\@
nop
1:
R10KCBARRIER(0(ra))
-EXC( LOAD t0, 0(src), .Ll_exc)
+ LOAD(t0, 0(src), .Ll_exc\@)
ADD src, src, NBYTES
SUB len, len, NBYTES
-EXC( STORE t0, 0(dst), .Ls_exc_p1u)
+ STORE(t0, 0(dst), .Ls_exc_p1u\@)
.set reorder /* DADDI_WAR */
ADD dst, dst, NBYTES
bne rem, len, 1b
@@ -322,17 +388,17 @@ EXC( STORE t0, 0(dst), .Ls_exc_p1u)
* more instruction-level parallelism.
*/
#define bits t2
- beqz len, .Ldone
+ beqz len, .Ldone\@
ADD t1, dst, len # t1 is just past last byte of dst
li bits, 8*NBYTES
SLL rem, len, 3 # rem = number of bits to keep
-EXC( LOAD t0, 0(src), .Ll_exc)
+ LOAD(t0, 0(src), .Ll_exc\@)
SUB bits, bits, rem # bits = number of bits to discard
SHIFT_DISCARD t0, t0, bits
-EXC( STREST t0, -1(t1), .Ls_exc)
+ STREST(t0, -1(t1), .Ls_exc\@)
jr ra
move len, zero
-.Ldst_unaligned:
+.Ldst_unaligned\@:
/*
* dst is unaligned
* t0 = src & ADDRMASK
@@ -343,25 +409,25 @@ EXC( STREST t0, -1(t1), .Ls_exc)
* Set match = (src and dst have same alignment)
*/
#define match rem
-EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc)
+ LDFIRST(t3, FIRST(0)(src), .Ll_exc\@)
ADD t2, zero, NBYTES
-EXC( LDREST t3, REST(0)(src), .Ll_exc_copy)
+ LDREST(t3, REST(0)(src), .Ll_exc_copy\@)
SUB t2, t2, t1 # t2 = number of bytes copied
xor match, t0, t1
R10KCBARRIER(0(ra))
-EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc)
- beq len, t2, .Ldone
+ STFIRST(t3, FIRST(0)(dst), .Ls_exc\@)
+ beq len, t2, .Ldone\@
SUB len, len, t2
ADD dst, dst, t2
- beqz match, .Lboth_aligned
+ beqz match, .Lboth_aligned\@
ADD src, src, t2
-.Lsrc_unaligned_dst_aligned:
+.Lsrc_unaligned_dst_aligned\@:
SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
- PREF( 0, 3*32(src) )
- beqz t0, .Lcleanup_src_unaligned
+ PREFS( 0, 3*32(src) )
+ beqz t0, .Lcleanup_src_unaligned\@
and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
- PREF( 1, 3*32(dst) )
+ PREFD( 1, 3*32(dst) )
1:
/*
* Avoid consecutive LD*'s to the same register since some mips
@@ -370,58 +436,58 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc)
* are to the same unit (unless src is aligned, but it's not).
*/
R10KCBARRIER(0(ra))
-EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
-EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy)
+ LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
+ LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@)
SUB len, len, 4*NBYTES
-EXC( LDREST t0, REST(0)(src), .Ll_exc_copy)
-EXC( LDREST t1, REST(1)(src), .Ll_exc_copy)
-EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy)
-EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy)
-EXC( LDREST t2, REST(2)(src), .Ll_exc_copy)
-EXC( LDREST t3, REST(3)(src), .Ll_exc_copy)
- PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed)
+ LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
+ LDREST(t1, REST(1)(src), .Ll_exc_copy\@)
+ LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@)
+ LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@)
+ LDREST(t2, REST(2)(src), .Ll_exc_copy\@)
+ LDREST(t3, REST(3)(src), .Ll_exc_copy\@)
+ PREFS( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed)
ADD src, src, 4*NBYTES
#ifdef CONFIG_CPU_SB1
nop # improves slotting
#endif
-EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u)
-EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u)
-EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u)
-EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u)
- PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed)
+ STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@)
+ STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@)
+ STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@)
+ STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@)
+ PREFD( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed)
.set reorder /* DADDI_WAR */
ADD dst, dst, 4*NBYTES
bne len, rem, 1b
.set noreorder
-.Lcleanup_src_unaligned:
- beqz len, .Ldone
+.Lcleanup_src_unaligned\@:
+ beqz len, .Ldone\@
and rem, len, NBYTES-1 # rem = len % NBYTES
- beq rem, len, .Lcopy_bytes
+ beq rem, len, .Lcopy_bytes\@
nop
1:
R10KCBARRIER(0(ra))
-EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
-EXC( LDREST t0, REST(0)(src), .Ll_exc_copy)
+ LDFIRST(t0, FIRST(0)(src), .Ll_exc\@)
+ LDREST(t0, REST(0)(src), .Ll_exc_copy\@)
ADD src, src, NBYTES
SUB len, len, NBYTES
-EXC( STORE t0, 0(dst), .Ls_exc_p1u)
+ STORE(t0, 0(dst), .Ls_exc_p1u\@)
.set reorder /* DADDI_WAR */
ADD dst, dst, NBYTES
bne len, rem, 1b
.set noreorder
-.Lcopy_bytes_checklen:
- beqz len, .Ldone
+.Lcopy_bytes_checklen\@:
+ beqz len, .Ldone\@
nop
-.Lcopy_bytes:
+.Lcopy_bytes\@:
/* 0 < len < NBYTES */
R10KCBARRIER(0(ra))
#define COPY_BYTE(N) \
-EXC( lb t0, N(src), .Ll_exc); \
+ LOADB(t0, N(src), .Ll_exc\@); \
SUB len, len, 1; \
- beqz len, .Ldone; \
-EXC( sb t0, N(dst), .Ls_exc_p1)
+ beqz len, .Ldone\@; \
+ STOREB(t0, N(dst), .Ls_exc_p1\@)
COPY_BYTE(0)
COPY_BYTE(1)
@@ -431,16 +497,19 @@ EXC( sb t0, N(dst), .Ls_exc_p1)
COPY_BYTE(4)
COPY_BYTE(5)
#endif
-EXC( lb t0, NBYTES-2(src), .Ll_exc)
+ LOADB(t0, NBYTES-2(src), .Ll_exc\@)
SUB len, len, 1
jr ra
-EXC( sb t0, NBYTES-2(dst), .Ls_exc_p1)
-.Ldone:
+ STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
+.Ldone\@:
jr ra
- nop
+ .if __memcpy == 1
END(memcpy)
+ .set __memcpy, 0
+ .hidden __memcpy
+ .endif
-.Ll_exc_copy:
+.Ll_exc_copy\@:
/*
* Copy bytes from src until faulting load address (or until a
* lb faults)
@@ -451,24 +520,24 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc_p1)
*
* Assumes src < THREAD_BUADDR($28)
*/
- LOAD t0, TI_TASK($28)
+ LOADK t0, TI_TASK($28)
nop
- LOAD t0, THREAD_BUADDR(t0)
+ LOADK t0, THREAD_BUADDR(t0)
1:
-EXC( lb t1, 0(src), .Ll_exc)
+ LOADB(t1, 0(src), .Ll_exc\@)
ADD src, src, 1
sb t1, 0(dst) # can't fault -- we're copy_from_user
.set reorder /* DADDI_WAR */
ADD dst, dst, 1
bne src, t0, 1b
.set noreorder
-.Ll_exc:
- LOAD t0, TI_TASK($28)
+.Ll_exc\@:
+ LOADK t0, TI_TASK($28)
nop
- LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
+ LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address
nop
SUB len, AT, t0 # len number of uncopied bytes
- bnez t6, .Ldone /* Skip the zeroing part if inatomic */
+ bnez t6, .Ldone\@ /* Skip the zeroing part if inatomic */
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
@@ -482,7 +551,7 @@ EXC( lb t1, 0(src), .Ll_exc)
*/
.set reorder /* DADDI_WAR */
SUB src, len, 1
- beqz len, .Ldone
+ beqz len, .Ldone\@
.set noreorder
1: sb zero, 0(dst)
ADD dst, dst, 1
@@ -503,7 +572,7 @@ EXC( lb t1, 0(src), .Ll_exc)
#define SEXC(n) \
.set reorder; /* DADDI_WAR */ \
-.Ls_exc_p ## n ## u: \
+.Ls_exc_p ## n ## u\@: \
ADD len, len, n*NBYTES; \
jr ra; \
.set noreorder
@@ -517,14 +586,15 @@ SEXC(3)
SEXC(2)
SEXC(1)
-.Ls_exc_p1:
+.Ls_exc_p1\@:
.set reorder /* DADDI_WAR */
ADD len, len, 1
jr ra
.set noreorder
-.Ls_exc:
+.Ls_exc\@:
jr ra
nop
+ .endm
.align 5
LEAF(memmove)
@@ -575,3 +645,71 @@ LEAF(__rmemcpy) /* a0=dst a1=src a2=len */
jr ra
move a2, zero
END(__rmemcpy)
+
+/*
+ * t6 is used as a flag to note inatomic mode.
+ */
+LEAF(__copy_user_inatomic)
+ b __copy_user_common
+ li t6, 1
+ END(__copy_user_inatomic)
+
+/*
+ * A combined memcpy/__copy_user
+ * __copy_user sets len to 0 for success; else to an upper bound of
+ * the number of uncopied bytes.
+ * memcpy sets v0 to dst.
+ */
+ .align 5
+LEAF(memcpy) /* a0=dst a1=src a2=len */
+ move v0, dst /* return value */
+.L__memcpy:
+FEXPORT(__copy_user)
+ li t6, 0 /* not inatomic */
+__copy_user_common:
+ /* Legacy Mode, user <-> user */
+ __BUILD_COPY_USER LEGACY_MODE USEROP USEROP
+
+#ifdef CONFIG_EVA
+
+/*
+ * For EVA we need distinct symbols for reading and writing to user space.
+ * This is because we need to use specific EVA instructions to perform the
+ * virtual <-> physical translation when a virtual address is actually in user
+ * space
+ */
+
+LEAF(__copy_user_inatomic_eva)
+ b __copy_from_user_common
+ li t6, 1
+ END(__copy_user_inatomic_eva)
+
+/*
+ * __copy_from_user (EVA)
+ */
+
+LEAF(__copy_from_user_eva)
+ li t6, 0 /* not inatomic */
+__copy_from_user_common:
+ __BUILD_COPY_USER EVA_MODE USEROP KERNELOP
+END(__copy_from_user_eva)
+
+
+
+/*
+ * __copy_to_user (EVA)
+ */
+
+LEAF(__copy_to_user_eva)
+__BUILD_COPY_USER EVA_MODE KERNELOP USEROP
+END(__copy_to_user_eva)
+
+/*
+ * __copy_in_user (EVA)
+ */
+
+LEAF(__copy_in_user_eva)
+__BUILD_COPY_USER EVA_MODE USEROP USEROP
+END(__copy_in_user_eva)
+
+#endif