summaryrefslogtreecommitdiffstats
path: root/arch/mips/cavium-octeon/executive/cvmx-helper.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper.c')
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper.c1116
1 files changed, 1116 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
new file mode 100644
index 000000000000..fa4963856353
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -0,0 +1,1116 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * Helper functions for common, but complicated tasks.
+ *
+ */
+#include <asm/octeon/octeon.h>
+
+#include <asm/octeon/cvmx-config.h>
+
+#include <asm/octeon/cvmx-fpa.h>
+#include <asm/octeon/cvmx-pip.h>
+#include <asm/octeon/cvmx-pko.h>
+#include <asm/octeon/cvmx-ipd.h>
+#include <asm/octeon/cvmx-spi.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include <asm/octeon/cvmx-pip-defs.h>
+#include <asm/octeon/cvmx-smix-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
+
+/**
+ * cvmx_override_pko_queue_priority(int ipd_port, uint64_t
+ * priorities[16]) is a function pointer. It is meant to allow
+ * customization of the PKO queue priorities based on the port
+ * number. Users should set this pointer to a function before
+ * calling any cvmx-helper operations.
+ */
+void (*cvmx_override_pko_queue_priority) (int pko_port,
+ uint64_t priorities[16]);
+
+/**
+ * cvmx_override_ipd_port_setup(int ipd_port) is a function
+ * pointer. It is meant to allow customization of the IPD port
+ * setup before packet input/output comes online. It is called
+ * after cvmx-helper does the default IPD configuration, but
+ * before IPD is enabled. Users should set this pointer to a
+ * function before calling any cvmx-helper operations.
+ */
+void (*cvmx_override_ipd_port_setup) (int ipd_port);
+
+/* Port count per interface */
+static int interface_port_count[4] = { 0, 0, 0, 0 };
+
+/* Port last configured link info index by IPD/PKO port */
+static cvmx_helper_link_info_t
+ port_link_info[CVMX_PIP_NUM_INPUT_PORTS];
+
+/**
+ * Return the number of interfaces the chip has. Each interface
+ * may have multiple ports. Most chips support two interfaces,
+ * but the CNX0XX and CNX1XX are exceptions. These only support
+ * one interface.
+ *
+ * Returns Number of interfaces on chip
+ */
+int cvmx_helper_get_number_of_interfaces(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
+ return 4;
+ else
+ return 3;
+}
+
+/**
+ * Return the number of ports on an interface. Depending on the
+ * chip and configuration, this can be 1-16. A value of 0
+ * specifies that the interface doesn't exist or isn't usable.
+ *
+ * @interface: Interface to get the port count for
+ *
+ * Returns Number of ports on interface. Can be Zero.
+ */
+int cvmx_helper_ports_on_interface(int interface)
+{
+ return interface_port_count[interface];
+}
+
+/**
+ * Get the operating mode of an interface. Depending on the Octeon
+ * chip and configuration, this function returns an enumeration
+ * of the type of packet I/O supported by an interface.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Mode of the interface. Unknown or unsupported interfaces return
+ * DISABLED.
+ */
+cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
+{
+ union cvmx_gmxx_inf_mode mode;
+ if (interface == 2)
+ return CVMX_HELPER_INTERFACE_MODE_NPI;
+
+ if (interface == 3) {
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX)
+ || OCTEON_IS_MODEL(OCTEON_CN52XX))
+ return CVMX_HELPER_INTERFACE_MODE_LOOP;
+ else
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+ }
+
+ if (interface == 0
+ && cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5
+ && cvmx_sysinfo_get()->board_rev_major == 1) {
+ /*
+ * Lie about interface type of CN3005 board. This
+ * board has a switch on port 1 like the other
+ * evaluation boards, but it is connected over RGMII
+ * instead of GMII. Report GMII mode so that the
+ * speed is forced to 1 Gbit full duplex. Other than
+ * some initial configuration (which does not use the
+ * output of this function) there is no difference in
+ * setup between GMII and RGMII modes.
+ */
+ return CVMX_HELPER_INTERFACE_MODE_GMII;
+ }
+
+ /* Interface 1 is always disabled on CN31XX and CN30XX */
+ if ((interface == 1)
+ && (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX)
+ || OCTEON_IS_MODEL(OCTEON_CN52XX)))
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+ mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
+
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+ switch (mode.cn56xx.mode) {
+ case 0:
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+ case 1:
+ return CVMX_HELPER_INTERFACE_MODE_XAUI;
+ case 2:
+ return CVMX_HELPER_INTERFACE_MODE_SGMII;
+ case 3:
+ return CVMX_HELPER_INTERFACE_MODE_PICMG;
+ default:
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+ }
+ } else {
+ if (!mode.s.en)
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+
+ if (mode.s.type) {
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX))
+ return CVMX_HELPER_INTERFACE_MODE_SPI;
+ else
+ return CVMX_HELPER_INTERFACE_MODE_GMII;
+ } else
+ return CVMX_HELPER_INTERFACE_MODE_RGMII;
+ }
+}
+
+/**
+ * Configure the IPD/PIP tagging and QoS options for a specific
+ * port. This function determines the POW work queue entry
+ * contents for a port. The setup performed here is controlled by
+ * the defines in executive-config.h.
+ *
+ * @ipd_port: Port to configure. This follows the IPD numbering, not the
+ * per interface numbering
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_port_setup_ipd(int ipd_port)
+{
+ union cvmx_pip_prt_cfgx port_config;
+ union cvmx_pip_prt_tagx tag_config;
+
+ port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
+ tag_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_TAGX(ipd_port));
+
+ /* Have each port go to a different POW queue */
+ port_config.s.qos = ipd_port & 0x7;
+
+ /* Process the headers and place the IP header in the work queue */
+ port_config.s.mode = CVMX_HELPER_INPUT_PORT_SKIP_MODE;
+
+ tag_config.s.ip6_src_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP;
+ tag_config.s.ip6_dst_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_IP;
+ tag_config.s.ip6_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT;
+ tag_config.s.ip6_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT;
+ tag_config.s.ip6_nxth_flag = CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER;
+ tag_config.s.ip4_src_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP;
+ tag_config.s.ip4_dst_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_IP;
+ tag_config.s.ip4_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT;
+ tag_config.s.ip4_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT;
+ tag_config.s.ip4_pctl_flag = CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL;
+ tag_config.s.inc_prt_flag = CVMX_HELPER_INPUT_TAG_INPUT_PORT;
+ tag_config.s.tcp6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
+ tag_config.s.tcp4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
+ tag_config.s.ip6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
+ tag_config.s.ip4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
+ tag_config.s.non_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
+ /* Put all packets in group 0. Other groups can be used by the app */
+ tag_config.s.grp = 0;
+
+ cvmx_pip_config_port(ipd_port, port_config, tag_config);
+
+ /* Give the user a chance to override our setting for each port */
+ if (cvmx_override_ipd_port_setup)
+ cvmx_override_ipd_port_setup(ipd_port);
+
+ return 0;
+}
+
+/**
+ * This function sets the interface_port_count[interface] correctly,
+ * without modifying any hardware configuration. Hardware setup of
+ * the ports will be performed later.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_interface_enumerate(int interface)
+{
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ /* These types don't support ports to IPD/PKO */
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ interface_port_count[interface] = 0;
+ break;
+ /* XAUI is a single high speed port */
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ interface_port_count[interface] =
+ __cvmx_helper_xaui_enumerate(interface);
+ break;
+ /*
+ * RGMII/GMII/MII are all treated about the same. Most
+ * functions refer to these ports as RGMII.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ interface_port_count[interface] =
+ __cvmx_helper_rgmii_enumerate(interface);
+ break;
+ /*
+ * SPI4 can have 1-16 ports depending on the device at
+ * the other end.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ interface_port_count[interface] =
+ __cvmx_helper_spi_enumerate(interface);
+ break;
+ /*
+ * SGMII can have 1-4 ports depending on how many are
+ * hooked up.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ interface_port_count[interface] =
+ __cvmx_helper_sgmii_enumerate(interface);
+ break;
+ /* PCI target Network Packet Interface */
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ interface_port_count[interface] =
+ __cvmx_helper_npi_enumerate(interface);
+ break;
+ /*
+ * Special loopback only ports. These are not the same
+ * as other ports in loopback mode.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ interface_port_count[interface] =
+ __cvmx_helper_loop_enumerate(interface);
+ break;
+ }
+
+ interface_port_count[interface] =
+ __cvmx_helper_board_interface_probe(interface,
+ interface_port_count
+ [interface]);
+
+ /* Make sure all global variables propagate to other cores */
+ CVMX_SYNCWS;
+
+ return 0;
+}
+
+/**
+ * This function probes an interface to determine the actual
+ * number of hardware ports connected to it. It doesn't setup the
+ * ports or enable them. The main goal here is to set the global
+ * interface_port_count[interface] correctly. Hardware setup of the
+ * ports will be performed later.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_interface_probe(int interface)
+{
+ cvmx_helper_interface_enumerate(interface);
+ /* At this stage in the game we don't want packets to be moving yet.
+ The following probe calls should perform hardware setup
+ needed to determine port counts. Receive must still be disabled */
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ /* These types don't support ports to IPD/PKO */
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ break;
+ /* XAUI is a single high speed port */
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ __cvmx_helper_xaui_probe(interface);
+ break;
+ /*
+ * RGMII/GMII/MII are all treated about the same. Most
+ * functions refer to these ports as RGMII.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ __cvmx_helper_rgmii_probe(interface);
+ break;
+ /*
+ * SPI4 can have 1-16 ports depending on the device at
+ * the other end.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ __cvmx_helper_spi_probe(interface);
+ break;
+ /*
+ * SGMII can have 1-4 ports depending on how many are
+ * hooked up.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ __cvmx_helper_sgmii_probe(interface);
+ break;
+ /* PCI target Network Packet Interface */
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ __cvmx_helper_npi_probe(interface);
+ break;
+ /*
+ * Special loopback only ports. These are not the same
+ * as other ports in loopback mode.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ __cvmx_helper_loop_probe(interface);
+ break;
+ }
+
+ /* Make sure all global variables propagate to other cores */
+ CVMX_SYNCWS;
+
+ return 0;
+}
+
+/**
+ * Setup the IPD/PIP for the ports on an interface. Packet
+ * classification and tagging are set for every port on the
+ * interface. The number of ports on the interface must already
+ * have been probed.
+ *
+ * @interface: Interface to setup IPD/PIP for
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_interface_setup_ipd(int interface)
+{
+ int ipd_port = cvmx_helper_get_ipd_port(interface, 0);
+ int num_ports = interface_port_count[interface];
+
+ while (num_ports--) {
+ __cvmx_helper_port_setup_ipd(ipd_port);
+ ipd_port++;
+ }
+ return 0;
+}
+
+/**
+ * Setup global setting for IPD/PIP not related to a specific
+ * interface or port. This must be called before IPD is enabled.
+ *
+ * Returns Zero on success, negative on failure.
+ */
+static int __cvmx_helper_global_setup_ipd(void)
+{
+ /* Setup the global packet input options */
+ cvmx_ipd_config(CVMX_FPA_PACKET_POOL_SIZE / 8,
+ CVMX_HELPER_FIRST_MBUFF_SKIP / 8,
+ CVMX_HELPER_NOT_FIRST_MBUFF_SKIP / 8,
+ /* The +8 is to account for the next ptr */
+ (CVMX_HELPER_FIRST_MBUFF_SKIP + 8) / 128,
+ /* The +8 is to account for the next ptr */
+ (CVMX_HELPER_NOT_FIRST_MBUFF_SKIP + 8) / 128,
+ CVMX_FPA_WQE_POOL,
+ CVMX_IPD_OPC_MODE_STT,
+ CVMX_HELPER_ENABLE_BACK_PRESSURE);
+ return 0;
+}
+
+/**
+ * Setup the PKO for the ports on an interface. The number of
+ * queues per port and the priority of each PKO output queue
+ * is set here. PKO must be disabled when this function is called.
+ *
+ * @interface: Interface to setup PKO for
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_interface_setup_pko(int interface)
+{
+ /*
+ * Each packet output queue has an associated priority. The
+ * higher the priority, the more often it can send a packet. A
+ * priority of 8 means it can send in all 8 rounds of
+ * contention. We're going to make each queue one less than
+ * the last. The vector of priorities has been extended to
+ * support CN5xxx CPUs, where up to 16 queues can be
+ * associated to a port. To keep backward compatibility we
+ * don't change the initial 8 priorities and replicate them in
+ * the second half. With per-core PKO queues (PKO lockless
+ * operation) all queues have the same priority.
+ */
+ uint64_t priorities[16] =
+ { 8, 7, 6, 5, 4, 3, 2, 1, 8, 7, 6, 5, 4, 3, 2, 1 };
+
+ /*
+ * Setup the IPD/PIP and PKO for the ports discovered
+ * above. Here packet classification, tagging and output
+ * priorities are set.
+ */
+ int ipd_port = cvmx_helper_get_ipd_port(interface, 0);
+ int num_ports = interface_port_count[interface];
+ while (num_ports--) {
+ /*
+ * Give the user a chance to override the per queue
+ * priorities.
+ */
+ if (cvmx_override_pko_queue_priority)
+ cvmx_override_pko_queue_priority(ipd_port, priorities);
+
+ cvmx_pko_config_port(ipd_port,
+ cvmx_pko_get_base_queue_per_core(ipd_port,
+ 0),
+ cvmx_pko_get_num_queues(ipd_port),
+ priorities);
+ ipd_port++;
+ }
+ return 0;
+}
+
+/**
+ * Setup global setting for PKO not related to a specific
+ * interface or port. This must be called before PKO is enabled.
+ *
+ * Returns Zero on success, negative on failure.
+ */
+static int __cvmx_helper_global_setup_pko(void)
+{
+ /*
+ * Disable tagwait FAU timeout. This needs to be done before
+ * anyone might start packet output using tags.
+ */
+ union cvmx_iob_fau_timeout fau_to;
+ fau_to.u64 = 0;
+ fau_to.s.tout_val = 0xfff;
+ fau_to.s.tout_enb = 0;
+ cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64);
+ return 0;
+}
+
+/**
+ * Setup global backpressure setting.
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_global_setup_backpressure(void)
+{
+#if CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE
+ /* Disable backpressure if configured to do so */
+ /* Disable backpressure (pause frame) generation */
+ int num_interfaces = cvmx_helper_get_number_of_interfaces();
+ int interface;
+ for (interface = 0; interface < num_interfaces; interface++) {
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ cvmx_gmx_set_backpressure_override(interface, 0xf);
+ break;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+/**
+ * Enable packet input/output from the hardware. This function is
+ * called after all internal setup is complete and IPD is enabled.
+ * After this function completes, packets will be accepted from the
+ * hardware ports. PKO should still be disabled to make sure packets
+ * aren't sent out partially setup hardware.
+ *
+ * @interface: Interface to enable
+ *
+ * Returns Zero on success, negative on failure
+ */
+static int __cvmx_helper_packet_hardware_enable(int interface)
+{
+ int result = 0;
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ /* These types don't support ports to IPD/PKO */
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ /* Nothing to do */
+ break;
+ /* XAUI is a single high speed port */
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ result = __cvmx_helper_xaui_enable(interface);
+ break;
+ /*
+ * RGMII/GMII/MII are all treated about the same. Most
+ * functions refer to these ports as RGMII
+ */
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ result = __cvmx_helper_rgmii_enable(interface);
+ break;
+ /*
+ * SPI4 can have 1-16 ports depending on the device at
+ * the other end
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ result = __cvmx_helper_spi_enable(interface);
+ break;
+ /*
+ * SGMII can have 1-4 ports depending on how many are
+ * hooked up
+ */
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ result = __cvmx_helper_sgmii_enable(interface);
+ break;
+ /* PCI target Network Packet Interface */
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ result = __cvmx_helper_npi_enable(interface);
+ break;
+ /*
+ * Special loopback only ports. These are not the same
+ * as other ports in loopback mode
+ */
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ result = __cvmx_helper_loop_enable(interface);
+ break;
+ }
+ result |= __cvmx_helper_board_hardware_enable(interface);
+ return result;
+}
+
+/**
+ * Function to adjust internal IPD pointer alignments
+ *
+ * Returns 0 on success
+ * !0 on failure
+ */
+int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
+{
+#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \
+ (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP)
+#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \
+ (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP)
+#define FIX_IPD_OUTPORT 0
+ /* Ports 0-15 are interface 0, 16-31 are interface 1 */
+#define INTERFACE(port) (port >> 4)
+#define INDEX(port) (port & 0xf)
+ uint64_t *p64;
+ cvmx_pko_command_word0_t pko_command;
+ union cvmx_buf_ptr g_buffer, pkt_buffer;
+ cvmx_wqe_t *work;
+ int size, num_segs = 0, wqe_pcnt, pkt_pcnt;
+ union cvmx_gmxx_prtx_cfg gmx_cfg;
+ int retry_cnt;
+ int retry_loop_cnt;
+ int i;
+ cvmx_helper_link_info_t link_info;
+
+ /* Save values for restore at end */
+ uint64_t prtx_cfg =
+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
+ uint64_t tx_ptr_en =
+ cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
+ uint64_t rx_ptr_en =
+ cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
+ uint64_t rxx_jabber =
+ cvmx_read_csr(CVMX_GMXX_RXX_JABBER
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
+ uint64_t frame_max =
+ cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
+
+ /* Configure port to gig FDX as required for loopback mode */
+ cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT);
+
+ /*
+ * Disable reception on all ports so if traffic is present it
+ * will not interfere.
+ */
+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0);
+
+ cvmx_wait(100000000ull);
+
+ for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) {
+ retry_cnt = 100000;
+ wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT);
+ pkt_pcnt = (wqe_pcnt >> 7) & 0x7f;
+ wqe_pcnt &= 0x7f;
+
+ num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3;
+
+ if (num_segs == 0)
+ goto fix_ipd_exit;
+
+ num_segs += 1;
+
+ size =
+ FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES +
+ ((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) -
+ (FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2);
+
+ cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)),
+ 1 << INDEX(FIX_IPD_OUTPORT));
+ CVMX_SYNC;
+
+ g_buffer.u64 = 0;
+ g_buffer.s.addr =
+ cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL));
+ if (g_buffer.s.addr == 0) {
+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
+ "buffer allocation failure.\n");
+ goto fix_ipd_exit;
+ }
+
+ g_buffer.s.pool = CVMX_FPA_WQE_POOL;
+ g_buffer.s.size = num_segs;
+
+ pkt_buffer.u64 = 0;
+ pkt_buffer.s.addr =
+ cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL));
+ if (pkt_buffer.s.addr == 0) {
+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
+ "buffer allocation failure.\n");
+ goto fix_ipd_exit;
+ }
+ pkt_buffer.s.i = 1;
+ pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL;
+ pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES;
+
+ p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr);
+ p64[0] = 0xffffffffffff0000ull;
+ p64[1] = 0x08004510ull;
+ p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull;
+ p64[3] = 0x3a5fc0a81073c0a8ull;
+
+ for (i = 0; i < num_segs; i++) {
+ if (i > 0)
+ pkt_buffer.s.size =
+ FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES;
+
+ if (i == (num_segs - 1))
+ pkt_buffer.s.i = 0;
+
+ *(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr +
+ 8 * i) = pkt_buffer.u64;
+ }
+
+ /* Build the PKO command */
+ pko_command.u64 = 0;
+ pko_command.s.segs = num_segs;
+ pko_command.s.total_bytes = size;
+ pko_command.s.dontfree = 0;
+ pko_command.s.gather = 1;
+
+ gmx_cfg.u64 =
+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG
+ (INDEX(FIX_IPD_OUTPORT),
+ INTERFACE(FIX_IPD_OUTPORT)));
+ gmx_cfg.s.en = 1;
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG
+ (INDEX(FIX_IPD_OUTPORT),
+ INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64);
+ cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
+ 1 << INDEX(FIX_IPD_OUTPORT));
+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
+ 1 << INDEX(FIX_IPD_OUTPORT));
+
+ cvmx_write_csr(CVMX_GMXX_RXX_JABBER
+ (INDEX(FIX_IPD_OUTPORT),
+ INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4);
+ cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX
+ (INDEX(FIX_IPD_OUTPORT),
+ INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4);
+
+ cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT,
+ cvmx_pko_get_base_queue
+ (FIX_IPD_OUTPORT),
+ CVMX_PKO_LOCK_CMD_QUEUE);
+ cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT,
+ cvmx_pko_get_base_queue
+ (FIX_IPD_OUTPORT), pko_command,
+ g_buffer, CVMX_PKO_LOCK_CMD_QUEUE);
+
+ CVMX_SYNC;
+
+ do {
+ work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
+ retry_cnt--;
+ } while ((work == NULL) && (retry_cnt > 0));
+
+ if (!retry_cnt)
+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
+ "get_work() timeout occurred.\n");
+
+ /* Free packet */
+ if (work)
+ cvmx_helper_free_packet_data(work);
+ }
+
+fix_ipd_exit:
+
+ /* Return CSR configs to saved values */
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
+ prtx_cfg);
+ cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
+ tx_ptr_en);
+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
+ rx_ptr_en);
+ cvmx_write_csr(CVMX_GMXX_RXX_JABBER
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
+ rxx_jabber);
+ cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX
+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
+ frame_max);
+ cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
+ /* Set link to down so autonegotiation will set it up again */
+ link_info.u64 = 0;
+ cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
+
+ /*
+ * Bring the link back up as autonegotiation is not done in
+ * user applications.
+ */
+ cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
+
+ CVMX_SYNC;
+ if (num_segs)
+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n");
+
+ return !!num_segs;
+
+}
+
+/**
+ * Called after all internal packet IO paths are setup. This
+ * function enables IPD/PIP and begins packet input and output.
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_ipd_and_packet_input_enable(void)
+{
+ int num_interfaces;
+ int interface;
+
+ /* Enable IPD */
+ cvmx_ipd_enable();
+
+ /*
+ * Time to enable hardware ports packet input and output. Note
+ * that at this point IPD/PIP must be fully functional and PKO
+ * must be disabled
+ */
+ num_interfaces = cvmx_helper_get_number_of_interfaces();
+ for (interface = 0; interface < num_interfaces; interface++) {
+ if (cvmx_helper_ports_on_interface(interface) > 0)
+ __cvmx_helper_packet_hardware_enable(interface);
+ }
+
+ /* Finally enable PKO now that the entire path is up and running */
+ cvmx_pko_enable();
+
+ if ((OCTEON_IS_MODEL(OCTEON_CN31XX_PASS1)
+ || OCTEON_IS_MODEL(OCTEON_CN30XX_PASS1))
+ && (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM))
+ __cvmx_helper_errata_fix_ipd_ptr_alignment();
+ return 0;
+}
+
+/**
+ * Initialize the PIP, IPD, and PKO hardware to support
+ * simple priority based queues for the ethernet ports. Each
+ * port is configured with a number of priority queues based
+ * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
+ * priority than the previous.
+ *
+ * Returns Zero on success, non-zero on failure
+ */
+int cvmx_helper_initialize_packet_io_global(void)
+{
+ int result = 0;
+ int interface;
+ union cvmx_l2c_cfg l2c_cfg;
+ union cvmx_smix_en smix_en;
+ const int num_interfaces = cvmx_helper_get_number_of_interfaces();
+
+ /*
+ * CN52XX pass 1: Due to a bug in 2nd order CDR, it needs to
+ * be disabled.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0))
+ __cvmx_helper_errata_qlm_disable_2nd_order_cdr(1);
+
+ /*
+ * Tell L2 to give the IOB statically higher priority compared
+ * to the cores. This avoids conditions where IO blocks might
+ * be starved under very high L2 loads.
+ */
+ l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG);
+ l2c_cfg.s.lrf_arb_mode = 0;
+ l2c_cfg.s.rfb_arb_mode = 0;
+ cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64);
+
+ /* Make sure SMI/MDIO is enabled so we can query PHYs */
+ smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(0));
+ if (!smix_en.s.en) {
+ smix_en.s.en = 1;
+ cvmx_write_csr(CVMX_SMIX_EN(0), smix_en.u64);
+ }
+
+ /* Newer chips actually have two SMI/MDIO interfaces */
+ if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN58XX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+ smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(1));
+ if (!smix_en.s.en) {
+ smix_en.s.en = 1;
+ cvmx_write_csr(CVMX_SMIX_EN(1), smix_en.u64);
+ }
+ }
+
+ cvmx_pko_initialize_global();
+ for (interface = 0; interface < num_interfaces; interface++) {
+ result |= cvmx_helper_interface_probe(interface);
+ if (cvmx_helper_ports_on_interface(interface) > 0)
+ cvmx_dprintf("Interface %d has %d ports (%s)\n",
+ interface,
+ cvmx_helper_ports_on_interface(interface),
+ cvmx_helper_interface_mode_to_string
+ (cvmx_helper_interface_get_mode
+ (interface)));
+ result |= __cvmx_helper_interface_setup_ipd(interface);
+ result |= __cvmx_helper_interface_setup_pko(interface);
+ }
+
+ result |= __cvmx_helper_global_setup_ipd();
+ result |= __cvmx_helper_global_setup_pko();
+
+ /* Enable any flow control and backpressure */
+ result |= __cvmx_helper_global_setup_backpressure();
+
+#if CVMX_HELPER_ENABLE_IPD
+ result |= cvmx_helper_ipd_and_packet_input_enable();
+#endif
+ return result;
+}
+
+/**
+ * Does core local initialization for packet io
+ *
+ * Returns Zero on success, non-zero on failure
+ */
+int cvmx_helper_initialize_packet_io_local(void)
+{
+ return cvmx_pko_initialize_local();
+}
+
+/**
+ * Auto configure an IPD/PKO port link state and speed. This
+ * function basically does the equivalent of:
+ * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
+ *
+ * @ipd_port: IPD/PKO port to auto configure
+ *
+ * Returns Link state after configure
+ */
+cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
+{
+ cvmx_helper_link_info_t link_info;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ if (index >= cvmx_helper_ports_on_interface(interface)) {
+ link_info.u64 = 0;
+ return link_info;
+ }
+
+ link_info = cvmx_helper_link_get(ipd_port);
+ if (link_info.u64 == port_link_info[ipd_port].u64)
+ return link_info;
+
+ /* If we fail to set the link speed, port_link_info will not change */
+ cvmx_helper_link_set(ipd_port, link_info);
+
+ /*
+ * port_link_info should be the current value, which will be
+ * different than expect if cvmx_helper_link_set() failed.
+ */
+ return port_link_info[ipd_port];
+}
+
+/**
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @ipd_port: IPD/PKO port to query
+ *
+ * Returns Link state
+ */
+cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ /* The default result will be a down link unless the code below
+ changes it */
+ result.u64 = 0;
+
+ if (index >= cvmx_helper_ports_on_interface(interface))
+ return result;
+
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ /* Network links are not supported */
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ result = __cvmx_helper_xaui_link_get(ipd_port);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ if (index == 0)
+ result = __cvmx_helper_rgmii_link_get(ipd_port);
+ else {
+ result.s.full_duplex = 1;
+ result.s.link_up = 1;
+ result.s.speed = 1000;
+ }
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ result = __cvmx_helper_rgmii_link_get(ipd_port);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ result = __cvmx_helper_spi_link_get(ipd_port);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ result = __cvmx_helper_sgmii_link_get(ipd_port);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ /* Network links are not supported */
+ break;
+ }
+ return result;
+}
+
+/**
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @ipd_port: IPD/PKO port to configure
+ * @link_info: The new link state
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
+{
+ int result = -1;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ if (index >= cvmx_helper_ports_on_interface(interface))
+ return -1;
+
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ result = __cvmx_helper_xaui_link_set(ipd_port, link_info);
+ break;
+ /*
+ * RGMII/GMII/MII are all treated about the same. Most
+ * functions refer to these ports as RGMII.
+ */
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ result = __cvmx_helper_rgmii_link_set(ipd_port, link_info);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ result = __cvmx_helper_spi_link_set(ipd_port, link_info);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ result = __cvmx_helper_sgmii_link_set(ipd_port, link_info);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ break;
+ }
+ /* Set the port_link_info here so that the link status is updated
+ no matter how cvmx_helper_link_set is called. We don't change
+ the value if link_set failed */
+ if (result == 0)
+ port_link_info[ipd_port].u64 = link_info.u64;
+ return result;
+}
+
+/**
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @ipd_port: IPD/PKO port to loopback.
+ * @enable_internal:
+ * Non zero if you want internal loopback
+ * @enable_external:
+ * Non zero if you want external loopback
+ *
+ * Returns Zero on success, negative on failure.
+ */
+int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
+ int enable_external)
+{
+ int result = -1;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ if (index >= cvmx_helper_ports_on_interface(interface))
+ return -1;
+
+ switch (cvmx_helper_interface_get_mode(interface)) {
+ case CVMX_HELPER_INTERFACE_MODE_DISABLED:
+ case CVMX_HELPER_INTERFACE_MODE_PCIE:
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ case CVMX_HELPER_INTERFACE_MODE_NPI:
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ result =
+ __cvmx_helper_xaui_configure_loopback(ipd_port,
+ enable_internal,
+ enable_external);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ result =
+ __cvmx_helper_rgmii_configure_loopback(ipd_port,
+ enable_internal,
+ enable_external);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_PICMG:
+ result =
+ __cvmx_helper_sgmii_configure_loopback(ipd_port,
+ enable_internal,
+ enable_external);
+ break;
+ }
+ return result;
+}