summaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r--arch/mips/alchemy/Kconfig5
-rw-r--r--arch/mips/alchemy/common/Makefile4
-rw-r--r--arch/mips/alchemy/common/au1xxx_irqmap.c205
-rw-r--r--arch/mips/alchemy/common/clocks.c65
-rw-r--r--arch/mips/alchemy/common/cputable.c52
-rw-r--r--arch/mips/alchemy/common/dbdma.c65
-rw-r--r--arch/mips/alchemy/common/irq.c745
-rw-r--r--arch/mips/alchemy/common/power.c406
-rw-r--r--arch/mips/alchemy/common/reset.c2
-rw-r--r--arch/mips/alchemy/common/setup.c71
-rw-r--r--arch/mips/alchemy/common/sleeper.S118
-rw-r--r--arch/mips/alchemy/common/time.c311
-rw-r--r--arch/mips/alchemy/db1x00/init.c62
-rw-r--r--arch/mips/alchemy/devboards/Makefile18
-rw-r--r--arch/mips/alchemy/devboards/db1x00/Makefile (renamed from arch/mips/alchemy/db1x00/Makefile)2
-rw-r--r--arch/mips/alchemy/devboards/db1x00/board_setup.c (renamed from arch/mips/alchemy/db1x00/board_setup.c)37
-rw-r--r--arch/mips/alchemy/devboards/db1x00/irqmap.c (renamed from arch/mips/alchemy/db1x00/irqmap.c)24
-rw-r--r--arch/mips/alchemy/devboards/pb1000/Makefile (renamed from arch/mips/alchemy/pb1000/Makefile)2
-rw-r--r--arch/mips/alchemy/devboards/pb1000/board_setup.c (renamed from arch/mips/alchemy/pb1000/board_setup.c)30
-rw-r--r--arch/mips/alchemy/devboards/pb1100/Makefile (renamed from arch/mips/alchemy/pb1100/Makefile)2
-rw-r--r--arch/mips/alchemy/devboards/pb1100/board_setup.c (renamed from arch/mips/alchemy/pb1100/board_setup.c)47
-rw-r--r--arch/mips/alchemy/devboards/pb1200/Makefile (renamed from arch/mips/alchemy/pb1200/Makefile)3
-rw-r--r--arch/mips/alchemy/devboards/pb1200/board_setup.c (renamed from arch/mips/alchemy/pb1200/board_setup.c)34
-rw-r--r--arch/mips/alchemy/devboards/pb1200/irqmap.c (renamed from arch/mips/alchemy/pb1200/irqmap.c)94
-rw-r--r--arch/mips/alchemy/devboards/pb1200/platform.c (renamed from arch/mips/alchemy/pb1200/platform.c)0
-rw-r--r--arch/mips/alchemy/devboards/pb1500/Makefile (renamed from arch/mips/alchemy/pb1500/Makefile)2
-rw-r--r--arch/mips/alchemy/devboards/pb1500/board_setup.c (renamed from arch/mips/alchemy/pb1500/board_setup.c)44
-rw-r--r--arch/mips/alchemy/devboards/pb1550/Makefile (renamed from arch/mips/alchemy/pb1550/Makefile)2
-rw-r--r--arch/mips/alchemy/devboards/pb1550/board_setup.c (renamed from arch/mips/alchemy/pb1550/board_setup.c)34
-rw-r--r--arch/mips/alchemy/devboards/pm.c229
-rw-r--r--arch/mips/alchemy/devboards/prom.c (renamed from arch/mips/alchemy/pb1550/init.c)26
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c12
-rw-r--r--arch/mips/alchemy/mtx-1/init.c2
-rw-r--r--arch/mips/alchemy/mtx-1/irqmap.c18
-rw-r--r--arch/mips/alchemy/pb1000/init.c57
-rw-r--r--arch/mips/alchemy/pb1000/irqmap.c38
-rw-r--r--arch/mips/alchemy/pb1100/init.c60
-rw-r--r--arch/mips/alchemy/pb1100/irqmap.c40
-rw-r--r--arch/mips/alchemy/pb1200/init.c58
-rw-r--r--arch/mips/alchemy/pb1500/init.c58
-rw-r--r--arch/mips/alchemy/pb1500/irqmap.c46
-rw-r--r--arch/mips/alchemy/pb1550/irqmap.c43
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c12
-rw-r--r--arch/mips/alchemy/xxs1500/init.c2
-rw-r--r--arch/mips/alchemy/xxs1500/irqmap.c31
45 files changed, 1336 insertions, 1882 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index e4a057d80ab6..7f8ef13d0014 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -128,9 +128,10 @@ config SOC_AU1200
config SOC_AU1X00
bool
select 64BIT_PHYS_ADDR
- select CEVT_R4K
- select CSRC_R4K
+ select CEVT_R4K_LIB
+ select CSRC_R4K_LIB
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
+ select GENERIC_HARDIRQS_NO__DO_IRQ
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd65bbf3..d50d4764eafe 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -6,8 +6,8 @@
#
obj-y += prom.o irq.o puts.o time.o reset.o \
- au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
- sleeper.o cputable.o dma.o dbdma.o gpio.o
+ clocks.o platform.o power.o setup.o \
+ sleeper.o dma.o dbdma.o gpio.o
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/alchemy/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c
deleted file mode 100644
index c7ca1596394c..000000000000
--- a/arch/mips/alchemy/common/au1xxx_irqmap.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx processor specific IRQ tables
- *
- * Copyright 2004 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <au1000.h>
-
-/* The IC0 interrupt table. This is processor, rather than
- * board dependent, so no reason to keep this info in the board
- * dependent files.
- *
- * Careful if you change match 2 request!
- * The interrupt handler is called directly from the low level dispatch code.
- */
-struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
-
-#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
- { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
- { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
- { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
- { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
- { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
-
-};
-
-int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 043429d17c5f..d8991854530e 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -27,12 +27,21 @@
*/
#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
+ * but just in case.....
+ */
+#define AU1000_SRC_CLK 12000000
+
static unsigned int au1x00_clock; /* Hz */
-static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
+static DEFINE_SPINLOCK(time_lock);
+
/*
* Set the au1000_clock
*/
@@ -63,31 +72,45 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
}
/*
- * Calculate the Au1x00's LCD clock based on the current
- * cpu clock and the system bus clock, and try to keep it
- * below 40 MHz (the Pb1000 board can lock-up if the LCD
- * clock is over 40 MHz).
+ * We read the real processor speed from the PLL. This is important
+ * because it is more accurate than computing it from the 32 KHz
+ * counter, if it exists. If we don't have an accurate processor
+ * speed, all of the peripherals that derive their clocks based on
+ * this advertised speed will introduce error and sometimes not work
+ * properly. This function is futher convoluted to still allow configurations
+ * to do that in case they have really, really old silicon with a
+ * write-only PLL register. -- Dan
*/
-void set_au1x00_lcd_clock(void)
+unsigned long au1xxx_calc_clock(void)
{
- unsigned int static_cfg0;
- unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
- ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
+ unsigned long cpu_speed;
+ unsigned long flags;
- static_cfg0 = au_readl(MEM_STCFG0);
+ spin_lock_irqsave(&time_lock, flags);
- if (static_cfg0 & (1 << 11))
- lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold by AMD, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (au1xxx_cpu_has_pll_wo())
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+ cpu_speed = 396000000;
+#endif
else
- lcd_clock = sys_busclk / 4;
+ cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
- if (lcd_clock > 50000) /* Epson MAX */
- printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
- lcd_clock);
-}
+ /* On Alchemy CPU:counter ratio is 1:1 */
+ mips_hpt_frequency = cpu_speed;
+ /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+ set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
-unsigned int get_au1x00_lcd_clock(void)
-{
- return lcd_clock;
+ spin_unlock_irqrestore(&time_lock, flags);
+
+ set_au1x00_speed(cpu_speed);
+
+ return cpu_speed;
}
-EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/alchemy/common/cputable.c b/arch/mips/alchemy/common/cputable.c
deleted file mode 100644
index ba6430bc2d03..000000000000
--- a/arch/mips/alchemy/common/cputable.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/mips/au1000/common/cputable.c
- *
- * Copyright (C) 2004 Dan Malek (dan@embeddededge.com)
- * Copied from PowerPC and updated for Alchemy Au1xxx processors.
- *
- * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct cpu_spec *cur_cpu_spec[NR_CPUS];
-
-/* With some thought, we can probably use the mask to reduce the
- * size of the table.
- */
-struct cpu_spec cpu_specs[] = {
- { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
- { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
- { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
- { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
- { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
- { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
- { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
- { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
- { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
- { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
- { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
- { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
- { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
- { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
- { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
- { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
-};
-
-void set_cpuspec(void)
-{
- struct cpu_spec *sp;
- u32 prid;
-
- prid = read_c0_prid();
- sp = cpu_specs;
- while ((prid & sp->prid_mask) != sp->prid_value)
- sp++;
- cur_cpu_spec[0] = sp;
-}
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 601ee9180ee4..3ab6d80d150d 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -174,6 +174,11 @@ static dbdev_tab_t dbdev_tab[] = {
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
+#ifdef CONFIG_PM
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+#endif
+
+
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
static dbdev_tab_t *find_dbdev_id(u32 id)
@@ -975,4 +980,64 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
return nbytes;
}
+#ifdef CONFIG_PM
+void au1xxx_dbdma_suspend(void)
+{
+ int i;
+ u32 addr;
+
+ addr = DDMA_GLOBAL_BASE;
+ au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
+ au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
+ au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
+ au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+
+ /* save channel configurations */
+ for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+ au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
+ au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
+ au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
+ au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
+ au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
+ au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+ au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
+
+ /* halt channel */
+ au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+ au_sync();
+ while (!(au_readl(addr + 0x14) & 1))
+ au_sync();
+
+ addr += 0x100; /* next channel base */
+ }
+ /* disable channel interrupts */
+ au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
+ au_sync();
+}
+
+void au1xxx_dbdma_resume(void)
+{
+ int i;
+ u32 addr;
+
+ addr = DDMA_GLOBAL_BASE;
+ au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
+ au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
+ au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
+ au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+
+ /* restore channel configurations */
+ for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+ au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
+ au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
+ au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
+ au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
+ au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
+ au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+ au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
+ au_sync();
+ addr += 0x100; /* next channel base */
+ }
+}
+#endif /* CONFIG_PM */
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 40c6ceceb5f9..c88c821b4c36 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -24,6 +24,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -36,15 +37,172 @@
#include <asm/mach-pb1x00/pb1000.h>
#endif
-#define EXT_INTC0_REQ0 2 /* IP 2 */
-#define EXT_INTC0_REQ1 3 /* IP 3 */
-#define EXT_INTC1_REQ0 4 /* IP 4 */
-#define EXT_INTC1_REQ1 5 /* IP 5 */
-#define MIPS_TIMER_IP 7 /* IP 7 */
-
-void (*board_init_irq)(void) __initdata = NULL;
+static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
+
+/* per-processor fixed function irqs */
+struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
+
+#if defined(CONFIG_SOC_AU1000)
+ { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1500)
+
+ { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1100)
+
+ { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1550)
+
+ { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+
+#elif defined(CONFIG_SOC_AU1200)
+
+ { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+
+#else
+#error "Error: Unknown Alchemy SOC"
+#endif
+};
-static DEFINE_SPINLOCK(irq_lock);
#ifdef CONFIG_PM
@@ -130,67 +288,47 @@ void restore_au1xxx_intctl(void)
#endif /* CONFIG_PM */
-inline void local_enable_irq(unsigned int irq_nr)
+static void au1x_ic0_unmask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
- if (bit >= 32) {
- au_writel(1 << (bit - 32), IC1_MASKSET);
- au_writel(1 << (bit - 32), IC1_WAKESET);
- } else {
- au_writel(1 << bit, IC0_MASKSET);
- au_writel(1 << bit, IC0_WAKESET);
- }
+ au_writel(1 << bit, IC0_MASKSET);
+ au_writel(1 << bit, IC0_WAKESET);
au_sync();
}
-
-inline void local_disable_irq(unsigned int irq_nr)
+static void au1x_ic1_unmask(unsigned int irq_nr)
{
- unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
+ unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
+ au_writel(1 << bit, IC1_MASKSET);
+ au_writel(1 << bit, IC1_WAKESET);
- if (bit >= 32) {
- au_writel(1 << (bit - 32), IC1_MASKCLR);
- au_writel(1 << (bit - 32), IC1_WAKECLR);
- } else {
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_WAKECLR);
- }
+/* very hacky. does the pb1000 cpld auto-disable this int?
+ * nowhere in the current kernel sources is it disabled. --mlau
+ */
+#if defined(CONFIG_MIPS_PB1000)
+ if (irq_nr == AU1000_GPIO_15)
+ au_writel(0x4000, PB1000_MDR); /* enable int */
+#endif
au_sync();
}
-
-static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr)
+static void au1x_ic0_mask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
- if (bit >= 32) {
- au_writel(1 << (bit - 32), IC1_RISINGCLR);
- au_writel(1 << (bit - 32), IC1_MASKCLR);
- } else {
- au_writel(1 << bit, IC0_RISINGCLR);
- au_writel(1 << bit, IC0_MASKCLR);
- }
+ au_writel(1 << bit, IC0_MASKCLR);
+ au_writel(1 << bit, IC0_WAKECLR);
au_sync();
}
-
-static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr)
+static void au1x_ic1_mask(unsigned int irq_nr)
{
- unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
- if (bit >= 32) {
- au_writel(1 << (bit - 32), IC1_FALLINGCLR);
- au_writel(1 << (bit - 32), IC1_MASKCLR);
- } else {
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_writel(1 << bit, IC0_MASKCLR);
- }
+ unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
+ au_writel(1 << bit, IC1_MASKCLR);
+ au_writel(1 << bit, IC1_WAKECLR);
au_sync();
}
-
-static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
+static void au1x_ic0_ack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
@@ -198,349 +336,229 @@ static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- if (bit >= 32) {
- au_writel(1 << (bit - 32), IC1_FALLINGCLR);
- au_writel(1 << (bit - 32), IC1_RISINGCLR);
- au_writel(1 << (bit - 32), IC1_MASKCLR);
- } else {
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_writel(1 << bit, IC0_MASKCLR);
- }
+ au_writel(1 << bit, IC0_FALLINGCLR);
+ au_writel(1 << bit, IC0_RISINGCLR);
au_sync();
}
-static inline void mask_and_ack_level_irq(unsigned int irq_nr)
+static void au1x_ic1_ack(unsigned int irq_nr)
{
- local_disable_irq(irq_nr);
- au_sync();
-#if defined(CONFIG_MIPS_PB1000)
- if (irq_nr == AU1000_GPIO_15) {
- au_writel(0x8000, PB1000_MDR); /* ack int */
- au_sync();
- }
-#endif
-}
-
-static void end_irq(unsigned int irq_nr)
-{
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- local_enable_irq(irq_nr);
+ unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
-#if defined(CONFIG_MIPS_PB1000)
- if (irq_nr == AU1000_GPIO_15) {
- au_writel(0x4000, PB1000_MDR); /* enable int */
- au_sync();
- }
-#endif
+ /*
+ * This may assume that we don't get interrupts from
+ * both edges at once, or if we do, that we don't care.
+ */
+ au_writel(1 << bit, IC1_FALLINGCLR);
+ au_writel(1 << bit, IC1_RISINGCLR);
+ au_sync();
}
-unsigned long save_local_and_disable(int controller)
+static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
- int i;
- unsigned long flags, mask;
-
- spin_lock_irqsave(&irq_lock, flags);
- if (controller) {
- mask = au_readl(IC1_MASKSET);
- for (i = 32; i < 64; i++)
- local_disable_irq(i);
- } else {
- mask = au_readl(IC0_MASKSET);
- for (i = 0; i < 32; i++)
- local_disable_irq(i);
- }
- spin_unlock_irqrestore(&irq_lock, flags);
-
- return mask;
-}
+ unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+ unsigned long wakemsk, flags;
-void restore_local_and_enable(int controller, unsigned long mask)
-{
- int i;
- unsigned long flags, new_mask;
-
- spin_lock_irqsave(&irq_lock, flags);
- for (i = 0; i < 32; i++)
- if (mask & (1 << i)) {
- if (controller)
- local_enable_irq(i + 32);
- else
- local_enable_irq(i);
- }
+ /* only GPIO 0-7 can act as wakeup source: */
+ if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+ return -EINVAL;
- if (controller)
- new_mask = au_readl(IC1_MASKSET);
+ local_irq_save(flags);
+ wakemsk = au_readl(SYS_WAKEMSK);
+ if (on)
+ wakemsk |= 1 << bit;
else
- new_mask = au_readl(IC0_MASKSET);
+ wakemsk &= ~(1 << bit);
+ au_writel(wakemsk, SYS_WAKEMSK);
+ au_sync();
+ local_irq_restore(flags);
- spin_unlock_irqrestore(&irq_lock, flags);
+ return 0;
}
-
-static struct irq_chip rise_edge_irq_type = {
- .name = "Au1000 Rise Edge",
- .ack = mask_and_ack_rise_edge_irq,
- .mask = local_disable_irq,
- .mask_ack = mask_and_ack_rise_edge_irq,
- .unmask = local_enable_irq,
- .end = end_irq,
-};
-
-static struct irq_chip fall_edge_irq_type = {
- .name = "Au1000 Fall Edge",
- .ack = mask_and_ack_fall_edge_irq,
- .mask = local_disable_irq,
- .mask_ack = mask_and_ack_fall_edge_irq,
- .unmask = local_enable_irq,
- .end = end_irq,
-};
-
-static struct irq_chip either_edge_irq_type = {
- .name = "Au1000 Rise or Fall Edge",
- .ack = mask_and_ack_either_edge_irq,
- .mask = local_disable_irq,
- .mask_ack = mask_and_ack_either_edge_irq,
- .unmask = local_enable_irq,
- .end = end_irq,
+/*
+ * irq_chips for both ICs; this way the mask handlers can be
+ * as short as possible.
+ *
+ * NOTE: the ->ack() callback is used by the handle_edge_irq
+ * flowhandler only, the ->mask_ack() one by handle_level_irq,
+ * so no need for an irq_chip for each type of irq (level/edge).
+ */
+static struct irq_chip au1x_ic0_chip = {
+ .name = "Alchemy-IC0",
+ .ack = au1x_ic0_ack, /* edge */
+ .mask = au1x_ic0_mask,
+ .mask_ack = au1x_ic0_mask, /* level */
+ .unmask = au1x_ic0_unmask,
+ .set_type = au1x_ic_settype,
};
-static struct irq_chip level_irq_type = {
- .name = "Au1000 Level",
- .ack = mask_and_ack_level_irq,
- .mask = local_disable_irq,
- .mask_ack = mask_and_ack_level_irq,
- .unmask = local_enable_irq,
- .end = end_irq,
+static struct irq_chip au1x_ic1_chip = {
+ .name = "Alchemy-IC1",
+ .ack = au1x_ic1_ack, /* edge */
+ .mask = au1x_ic1_mask,
+ .mask_ack = au1x_ic1_mask, /* level */
+ .unmask = au1x_ic1_unmask,
+ .set_type = au1x_ic_settype,
+ .set_wake = au1x_ic1_setwake,
};
-static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req)
+static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
{
- unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
- if (irq_nr > AU1000_MAX_INTR)
- return;
-
- /* Config2[n], Config1[n], Config0[n] */
- if (bit >= 32) {
- switch (type) {
- case INTC_INT_RISE_EDGE: /* 0:0:1 */
- au_writel(1 << (bit - 32), IC1_CFG2CLR);
- au_writel(1 << (bit - 32), IC1_CFG1CLR);
- au_writel(1 << (bit - 32), IC1_CFG0SET);
- set_irq_chip(irq_nr, &rise_edge_irq_type);
- break;
- case INTC_INT_FALL_EDGE: /* 0:1:0 */
- au_writel(1 << (bit - 32), IC1_CFG2CLR);
- au_writel(1 << (bit - 32), IC1_CFG1SET);
- au_writel(1 << (bit - 32), IC1_CFG0CLR);
- set_irq_chip(irq_nr, &fall_edge_irq_type);
- break;
- case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */
- au_writel(1 << (bit - 32), IC1_CFG2CLR);
- au_writel(1 << (bit - 32), IC1_CFG1SET);
- au_writel(1 << (bit - 32), IC1_CFG0SET);
- set_irq_chip(irq_nr, &either_edge_irq_type);
- break;
- case INTC_INT_HIGH_LEVEL: /* 1:0:1 */
- au_writel(1 << (bit - 32), IC1_CFG2SET);
- au_writel(1 << (bit - 32), IC1_CFG1CLR);
- au_writel(1 << (bit - 32), IC1_CFG0SET);
- set_irq_chip(irq_nr, &level_irq_type);
- break;
- case INTC_INT_LOW_LEVEL: /* 1:1:0 */
- au_writel(1 << (bit - 32), IC1_CFG2SET);
- au_writel(1 << (bit - 32), IC1_CFG1SET);
- au_writel(1 << (bit - 32), IC1_CFG0CLR);
- set_irq_chip(irq_nr, &level_irq_type);
- break;
- case INTC_INT_DISABLED: /* 0:0:0 */
- au_writel(1 << (bit - 32), IC1_CFG0CLR);
- au_writel(1 << (bit - 32), IC1_CFG1CLR);
- au_writel(1 << (bit - 32), IC1_CFG2CLR);
- break;
- default: /* disable the interrupt */
- printk(KERN_WARNING "unexpected int type %d (irq %d)\n",
- type, irq_nr);
- au_writel(1 << (bit - 32), IC1_CFG0CLR);
- au_writel(1 << (bit - 32), IC1_CFG1CLR);
- au_writel(1 << (bit - 32), IC1_CFG2CLR);
- return;
- }
- if (int_req) /* assign to interrupt request 1 */
- au_writel(1 << (bit - 32), IC1_ASSIGNCLR);
- else /* assign to interrupt request 0 */
- au_writel(1 << (bit - 32), IC1_ASSIGNSET);
- au_writel(1 << (bit - 32), IC1_SRCSET);
- au_writel(1 << (bit - 32), IC1_MASKCLR);
- au_writel(1 << (bit - 32), IC1_WAKECLR);
+ struct irq_chip *chip;
+ unsigned long icr[6];
+ unsigned int bit, ic;
+ int ret;
+
+ if (irq >= AU1000_INTC1_INT_BASE) {
+ bit = irq - AU1000_INTC1_INT_BASE;
+ chip = &au1x_ic1_chip;
+ ic = 1;
} else {
- switch (type) {
- case INTC_INT_RISE_EDGE: /* 0:0:1 */
- au_writel(1 << bit, IC0_CFG2CLR);
- au_writel(1 << bit, IC0_CFG1CLR);
- au_writel(1 << bit, IC0_CFG0SET);
- set_irq_chip(irq_nr, &rise_edge_irq_type);
- break;
- case INTC_INT_FALL_EDGE: /* 0:1:0 */
- au_writel(1 << bit, IC0_CFG2CLR);
- au_writel(1 << bit, IC0_CFG1SET);
- au_writel(1 << bit, IC0_CFG0CLR);
- set_irq_chip(irq_nr, &fall_edge_irq_type);
- break;
- case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */
- au_writel(1 << bit, IC0_CFG2CLR);
- au_writel(1 << bit, IC0_CFG1SET);
- au_writel(1 << bit, IC0_CFG0SET);
- set_irq_chip(irq_nr, &either_edge_irq_type);
- break;
- case INTC_INT_HIGH_LEVEL: /* 1:0:1 */
- au_writel(1 << bit, IC0_CFG2SET);
- au_writel(1 << bit, IC0_CFG1CLR);
- au_writel(1 << bit, IC0_CFG0SET);
- set_irq_chip(irq_nr, &level_irq_type);
- break;
- case INTC_INT_LOW_LEVEL: /* 1:1:0 */
- au_writel(1 << bit, IC0_CFG2SET);
- au_writel(1 << bit, IC0_CFG1SET);
- au_writel(1 << bit, IC0_CFG0CLR);
- set_irq_chip(irq_nr, &level_irq_type);
- break;
- case INTC_INT_DISABLED: /* 0:0:0 */
- au_writel(1 << bit, IC0_CFG0CLR);
- au_writel(1 << bit, IC0_CFG1CLR);
- au_writel(1 << bit, IC0_CFG2CLR);
- break;
- default: /* disable the interrupt */
- printk(KERN_WARNING "unexpected int type %d (irq %d)\n",
- type, irq_nr);
- au_writel(1 << bit, IC0_CFG0CLR);
- au_writel(1 << bit, IC0_CFG1CLR);
- au_writel(1 << bit, IC0_CFG2CLR);
- return;
- }
- if (int_req) /* assign to interrupt request 1 */
- au_writel(1 << bit, IC0_ASSIGNCLR);
- else /* assign to interrupt request 0 */
- au_writel(1 << bit, IC0_ASSIGNSET);
- au_writel(1 << bit, IC0_SRCSET);
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_WAKECLR);
+ bit = irq - AU1000_INTC0_INT_BASE;
+ chip = &au1x_ic0_chip;
+ ic = 0;
+ }
+
+ if (bit > 31)
+ return -EINVAL;
+
+ icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
+ icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
+ icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
+ icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
+ icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
+ icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
+
+ ret = 0;
+
+ switch (flow_type) { /* cfgregs 2:1:0 */
+ case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
+ au_writel(1 << bit, icr[5]);
+ au_writel(1 << bit, icr[4]);
+ au_writel(1 << bit, icr[0]);
+ set_irq_chip_and_handler_name(irq, chip,
+ handle_edge_irq, "riseedge");
+ break;
+ case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
+ au_writel(1 << bit, icr[5]);
+ au_writel(1 << bit, icr[1]);
+ au_writel(1 << bit, icr[3]);
+ set_irq_chip_and_handler_name(irq, chip,
+ handle_edge_irq, "falledge");
+ break;
+ case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
+ au_writel(1 << bit, icr[5]);
+ au_writel(1 << bit, icr[1]);
+ au_writel(1 << bit, icr[0]);
+ set_irq_chip_and_handler_name(irq, chip,
+ handle_edge_irq, "bothedge");
+ break;
+ case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
+ au_writel(1 << bit, icr[2]);
+ au_writel(1 << bit, icr[4]);
+ au_writel(1 << bit, icr[0]);
+ set_irq_chip_and_handler_name(irq, chip,
+ handle_level_irq, "hilevel");
+ break;
+ case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
+ au_writel(1 << bit, icr[2]);
+ au_writel(1 << bit, icr[1]);
+ au_writel(1 << bit, icr[3]);
+ set_irq_chip_and_handler_name(irq, chip,
+ handle_level_irq, "lowlevel");
+ break;
+ case IRQ_TYPE_NONE: /* 0:0:0 */
+ au_writel(1 << bit, icr[5]);
+ au_writel(1 << bit, icr[4]);
+ au_writel(1 << bit, icr[3]);
+ /* set at least chip so we can call set_irq_type() on it */
+ set_irq_chip(irq, chip);
+ break;
+ default:
+ ret = -EINVAL;
}
au_sync();
-}
-/*
- * Interrupts are nested. Even if an interrupt handler is registered
- * as "fast", we might get another interrupt before we return from
- * intcX_reqX_irqdispatch().
- */
+ return ret;
+}
-static void intc0_req0_irqdispatch(void)
+asmlinkage void plat_irq_dispatch(void)
{
- static unsigned long intc0_req0;
- unsigned int bit;
-
- intc0_req0 |= au_readl(IC0_REQ0INT);
+ unsigned int pending = read_c0_status() & read_c0_cause();
+ unsigned long s, off, bit;
- if (!intc0_req0)
+ if (pending & CAUSEF_IP7) {
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
return;
-
+ } else if (pending & CAUSEF_IP2) {
+ s = IC0_REQ0INT;
+ off = AU1000_INTC0_INT_BASE;
+ } else if (pending & CAUSEF_IP3) {
+ s = IC0_REQ1INT;
+ off = AU1000_INTC0_INT_BASE;
+ } else if (pending & CAUSEF_IP4) {
+ s = IC1_REQ0INT;
+ off = AU1000_INTC1_INT_BASE;
+ } else if (pending & CAUSEF_IP5) {
+ s = IC1_REQ1INT;
+ off = AU1000_INTC1_INT_BASE;
+ } else
+ goto spurious;
+
+ bit = 0;
+ s = au_readl(s);
+ if (unlikely(!s)) {
+spurious:
+ spurious_interrupt();
+ return;
+ }
#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
* interrupt needs the highest priority.
*/
- if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) {
- intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT);
+ bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
+ if ((pending & CAUSEF_IP2) && (s & bit)) {
do_IRQ(AU1000_USB_DEV_REQ_INT);
return;
}
#endif
- bit = __ffs(intc0_req0);
- intc0_req0 &= ~(1 << bit);
- do_IRQ(AU1000_INTC0_INT_BASE + bit);
+ do_IRQ(__ffs(s) + off);
}
-
-static void intc0_req1_irqdispatch(void)
-{
- static unsigned long intc0_req1;
- unsigned int bit;
-
- intc0_req1 |= au_readl(IC0_REQ1INT);
-
- if (!intc0_req1)
- return;
-
- bit = __ffs(intc0_req1);
- intc0_req1 &= ~(1 << bit);
- do_IRQ(AU1000_INTC0_INT_BASE + bit);
-}
-
-
-/*
- * Interrupt Controller 1:
- * interrupts 32 - 63
- */
-static void intc1_req0_irqdispatch(void)
+/* setup edge/level and assign request 0/1 */
+void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
{
- static unsigned long intc1_req0;
- unsigned int bit;
-
- intc1_req0 |= au_readl(IC1_REQ0INT);
-
- if (!intc1_req0)
- return;
-
- bit = __ffs(intc1_req0);
- intc1_req0 &= ~(1 << bit);
- do_IRQ(AU1000_INTC1_INT_BASE + bit);
-}
-
-
-static void intc1_req1_irqdispatch(void)
-{
- static unsigned long intc1_req1;
- unsigned int bit;
-
- intc1_req1 |= au_readl(IC1_REQ1INT);
-
- if (!intc1_req1)
- return;
-
- bit = __ffs(intc1_req1);
- intc1_req1 &= ~(1 << bit);
- do_IRQ(AU1000_INTC1_INT_BASE + bit);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause();
+ unsigned int bit, irq_nr;
+
+ while (count--) {
+ irq_nr = map[count].im_irq;
+
+ if (((irq_nr < AU1000_INTC0_INT_BASE) ||
+ (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
+ ((irq_nr < AU1000_INTC1_INT_BASE) ||
+ (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
+ continue;
+
+ if (irq_nr >= AU1000_INTC1_INT_BASE) {
+ bit = irq_nr - AU1000_INTC1_INT_BASE;
+ if (map[count].im_request)
+ au_writel(1 << bit, IC1_ASSIGNCLR);
+ } else {
+ bit = irq_nr - AU1000_INTC0_INT_BASE;
+ if (map[count].im_request)
+ au_writel(1 << bit, IC0_ASSIGNCLR);
+ }
- if (pending & CAUSEF_IP7)
- do_IRQ(MIPS_CPU_IRQ_BASE + 7);
- else if (pending & CAUSEF_IP2)
- intc0_req0_irqdispatch();
- else if (pending & CAUSEF_IP3)
- intc0_req1_irqdispatch();
- else if (pending & CAUSEF_IP4)
- intc1_req0_irqdispatch();
- else if (pending & CAUSEF_IP5)
- intc1_req1_irqdispatch();
- else
- spurious_interrupt();
+ au1x_ic_settype(irq_nr, map[count].im_type);
+ }
}
void __init arch_init_irq(void)
{
int i;
- struct au1xxx_irqmap *imp;
- extern struct au1xxx_irqmap au1xxx_irq_map[];
- extern struct au1xxx_irqmap au1xxx_ic0_map[];
- extern int au1xxx_nr_irqs;
- extern int au1xxx_ic0_nr_irqs;
/*
* Initialize interrupt controllers to a safe state.
@@ -569,28 +587,25 @@ void __init arch_init_irq(void)
mips_cpu_irq_init();
- /*
- * Initialize IC0, which is fixed per processor.
+ /* register all 64 possible IC0+IC1 irq sources as type "none".
+ * Use set_irq_type() to set edge/level behaviour at runtime.
*/
- imp = au1xxx_ic0_map;
- for (i = 0; i < au1xxx_ic0_nr_irqs; i++) {
- setup_local_irq(imp->im_irq, imp->im_type, imp->im_request);
- imp++;
- }
+ for (i = AU1000_INTC0_INT_BASE;
+ (i < AU1000_INTC0_INT_BASE + 32); i++)
+ au1x_ic_settype(i, IRQ_TYPE_NONE);
+
+ for (i = AU1000_INTC1_INT_BASE;
+ (i < AU1000_INTC1_INT_BASE + 32); i++)
+ au1x_ic_settype(i, IRQ_TYPE_NONE);
/*
- * Now set up the irq mapping for the board.
+ * Initialize IC0, which is fixed per processor.
*/
- imp = au1xxx_irq_map;
- for (i = 0; i < au1xxx_nr_irqs; i++) {
- setup_local_irq(imp->im_irq, imp->im_type, imp->im_request);
- imp++;
- }
-
- set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
+ au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
- /* Board specific IRQ initialization.
+ /* Boards can register additional (GPIO-based) IRQs.
*/
- if (board_init_irq)
- board_init_irq();
+ board_init_irq();
+
+ set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index bd854a6d1d89..6ab7b42aa1be 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -35,25 +35,12 @@
#include <linux/jiffies.h>
#include <asm/uaccess.h>
-#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_PM
-
-#define DEBUG 1
-#ifdef DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
-#else
-#define DPRINTK(fmt, args...)
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#endif
-static void au1000_calibrate_delay(void);
-
-extern unsigned long save_local_and_disable(int controller);
-extern void restore_local_and_enable(int controller, unsigned long mask);
-extern void local_enable_irq(unsigned int irq_nr);
-
-static DEFINE_SPINLOCK(pm_lock);
+#ifdef CONFIG_PM
/*
* We need to save/restore a bunch of core registers that are
@@ -65,29 +52,16 @@ static DEFINE_SPINLOCK(pm_lock);
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_aux_pll_cntrl;
-static unsigned int sleep_cpu_pll_cntrl;
-static unsigned int sleep_pin_function;
-static unsigned int sleep_uart0_inten;
-static unsigned int sleep_uart0_fifoctl;
-static unsigned int sleep_uart0_linectl;
-static unsigned int sleep_uart0_clkdiv;
-static unsigned int sleep_uart0_enable;
-static unsigned int sleep_usbhost_enable;
-static unsigned int sleep_usbdev_enable;
-static unsigned int sleep_static_memctlr[4][3];
+static unsigned int sleep_uart0_inten;
+static unsigned int sleep_uart0_fifoctl;
+static unsigned int sleep_uart0_linectl;
+static unsigned int sleep_uart0_clkdiv;
+static unsigned int sleep_uart0_enable;
+static unsigned int sleep_usb[2];
+static unsigned int sleep_sys_clocks[5];
+static unsigned int sleep_sys_pinfunc;
+static unsigned int sleep_static_memctlr[4][3];
-/*
- * Define this to cause the value you write to /proc/sys/pm/sleep to
- * set the TOY timer for the amount of time you want to sleep.
- * This is done mainly for testing, but may be useful in other cases.
- * The value is number of 32KHz ticks to sleep.
- */
-#define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
-void wakeup_counter0_set(int ticks);
-#endif
static void save_core_regs(void)
{
@@ -105,31 +79,45 @@ static void save_core_regs(void)
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
+ au_sync();
+#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
- sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
+ sleep_usb[0] = au_readl(USB_HOST_CONFIG);
/* There appears to be some undocumented reset register.... */
- au_writel(0, 0xb0100004); au_sync();
- au_writel(0, USB_HOST_CONFIG); au_sync();
+ au_writel(0, 0xb0100004);
+ au_sync();
+ au_writel(0, USB_HOST_CONFIG);
+ au_sync();
- sleep_usbdev_enable = au_readl(USBD_ENABLE);
- au_writel(0, USBD_ENABLE); au_sync();
+ sleep_usb[1] = au_readl(USBD_ENABLE);
+ au_writel(0, USBD_ENABLE);
+ au_sync();
+
+#else /* AU1200 */
+
+ /* enable access to OTG mmio so we can save OTG CAP/MUX.
+ * FIXME: write an OTG driver and move this stuff there!
+ */
+ au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+ au_sync();
+ sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
+ sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
+#endif
/* Save interrupt controller state. */
save_au1xxx_intctl();
/* Clocks and PLLs. */
- sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
+ sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
+ sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
+ sleep_sys_clocks[2] = au_readl(SYS_CLKSRC);
+ sleep_sys_clocks[3] = au_readl(SYS_CPUPLL);
+ sleep_sys_clocks[4] = au_readl(SYS_AUXPLL);
- /*
- * We don't really need to do this one, but unless we
- * write it again it won't have a valid value if we
- * happen to read it.
- */
- sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
-
- sleep_pin_function = au_readl(SYS_PINFUNC);
+ /* pin mux config */
+ sleep_sys_pinfunc = au_readl(SYS_PINFUNC);
/* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
@@ -144,16 +132,45 @@ static void save_core_regs(void)
sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ au1xxx_dbdma_suspend();
+#endif
}
static void restore_core_regs(void)
{
- extern void restore_au1xxx_intctl(void);
- extern void wakeup_counter0_adjust(void);
+ /* restore clock configuration. Writing CPUPLL last will
+ * stall a bit and stabilize other clocks (unless this is
+ * one of those Au1000 with a write-only PLL, where we dont
+ * have a valid value)
+ */
+ au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0);
+ au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1);
+ au_writel(sleep_sys_clocks[2], SYS_CLKSRC);
+ au_writel(sleep_sys_clocks[4], SYS_AUXPLL);
+ if (!au1xxx_cpu_has_pll_wo())
+ au_writel(sleep_sys_clocks[3], SYS_CPUPLL);
+ au_sync();
- au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
- au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
- au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
+ au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
+ au_sync();
+
+#ifndef CONFIG_SOC_AU1200
+ au_writel(sleep_usb[0], USB_HOST_CONFIG);
+ au_writel(sleep_usb[1], USBD_ENABLE);
+ au_sync();
+#else
+ /* enable accces to OTG memory */
+ au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+ au_sync();
+
+ /* restore OTG caps and port mux. */
+ au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
+ au_sync();
+ au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
+ au_sync();
+#endif
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
@@ -184,282 +201,17 @@ static void restore_core_regs(void)
}
restore_au1xxx_intctl();
- wakeup_counter0_adjust();
-}
-
-unsigned long suspend_mode;
-void wakeup_from_suspend(void)
-{
- suspend_mode = 0;
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ au1xxx_dbdma_resume();
+#endif
}
-int au_sleep(void)
+void au_sleep(void)
{
- unsigned long wakeup, flags;
- extern void save_and_sleep(void);
-
- spin_lock_irqsave(&pm_lock, flags);
-
save_core_regs();
-
- flush_cache_all();
-
- /**
- ** The code below is all system dependent and we should probably
- ** have a function call out of here to set this up. You need
- ** to configure the GPIO or timer interrupts that will bring
- ** you out of sleep.
- ** For testing, the TOY counter wakeup is useful.
- **/
-#if 0
- au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
-
- /* GPIO 6 can cause a wake up event */
- wakeup = au_readl(SYS_WAKEMSK);
- wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
-#else
- /* For testing, allow match20 to wake us up. */
-#ifdef SLEEP_TEST_TIMEOUT
- wakeup_counter0_set(sleep_ticks);
-#endif
- wakeup = 1 << 8; /* turn on match20 wakeup */
- wakeup = 0;
-#endif
- au_writel(1, SYS_WAKESRC); /* clear cause */
- au_sync();
- au_writel(wakeup, SYS_WAKEMSK);
- au_sync();
-
- save_and_sleep();
-
- /*
- * After a wakeup, the cpu vectors back to 0x1fc00000, so
- * it's up to the boot code to get us back here.
- */
+ au1xxx_save_and_sleep();
restore_core_regs();
- spin_unlock_irqrestore(&pm_lock, flags);
- return 0;
-}
-
-static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
- void __user *buffer, size_t *len, loff_t *ppos)
-{
-#ifdef SLEEP_TEST_TIMEOUT
-#define TMPBUFLEN2 16
- char buf[TMPBUFLEN2], *p;
-#endif
-
- if (!write)
- *len = 0;
- else {
-#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1)
- return -EFAULT;
- if (copy_from_user(buf, buffer, *len))
- return -EFAULT;
- buf[*len] = 0;
- p = buf;
- sleep_ticks = simple_strtoul(p, &p, 0);
-#endif
-
- au_sleep();
- }
- return 0;
-}
-
-static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
- void __user *buffer, size_t *len, loff_t *ppos)
-{
- int retval = 0, i;
- unsigned long val, pll;
-#define TMPBUFLEN 64
-#define MAX_CPU_FREQ 396
- char buf[TMPBUFLEN], *p;
- unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
- unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
- unsigned long baud_rate;
-
- spin_lock_irqsave(&pm_lock, flags);
- if (!write)
- *len = 0;
- else {
- /* Parse the new frequency */
- if (*len > TMPBUFLEN - 1) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
- buf[*len] = 0;
- p = buf;
- val = simple_strtoul(p, &p, 0);
- if (val > MAX_CPU_FREQ) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
-
- pll = val / 12;
- if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* Revisit this for higher speed CPUs */
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
-
- old_baud_base = get_au1x00_uart_baud_base();
- old_cpu_freq = get_au1x00_speed();
-
- new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
- & 0x03) + 2) * 16));
- set_au1x00_speed(new_cpu_freq);
- set_au1x00_uart_baud_base(new_baud_base);
-
- old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
- (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
-
- au_writel(pll, SYS_CPUPLL);
- au_sync_delay(1);
- au_writel(new_refresh, MEM_SDREFCFG);
- au_sync_delay(1);
-
- for (i = 0; i < 4; i++)
- if (au_readl(UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk = au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- baud_rate = old_baud_base / old_clk;
- /*
- * We won't get an exact baud rate and the error
- * could be significant enough that our new
- * calculation will result in a clock that will
- * give us a baud rate that's too far off from
- * what we really want.
- */
- if (baud_rate > 100000)
- baud_rate = 115200;
- else if (baud_rate > 50000)
- baud_rate = 57600;
- else if (baud_rate > 30000)
- baud_rate = 38400;
- else if (baud_rate > 17000)
- baud_rate = 19200;
- else
- baud_rate = 9600;
- new_clk = new_baud_base / baud_rate;
- au_writel(new_clk, UART_BASE + UART_CLK +
- i * 0x00100000);
- au_sync_delay(10);
- }
- }
-
- /*
- * We don't want _any_ interrupts other than match20. Otherwise our
- * au1000_calibrate_delay() calculation will be off, potentially a lot.
- */
- intc0_mask = save_local_and_disable(0);
- intc1_mask = save_local_and_disable(1);
- local_enable_irq(AU1000_TOY_MATCH2_INT);
- spin_unlock_irqrestore(&pm_lock, flags);
- au1000_calibrate_delay();
- restore_local_and_enable(0, intc0_mask);
- restore_local_and_enable(1, intc1_mask);
-
- return retval;
}
-
-static struct ctl_table pm_table[] = {
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "sleep",
- .data = NULL,
- .maxlen = 0,
- .mode = 0600,
- .proc_handler = &pm_do_sleep
- },
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "freq",
- .data = NULL,
- .maxlen = 0,
- .mode = 0600,
- .proc_handler = &pm_do_freq
- },
- {}
-};
-
-static struct ctl_table pm_dir_table[] = {
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "pm",
- .mode = 0555,
- .child = pm_table
- },
- {}
-};
-
-/*
- * Initialize power interface
- */
-static int __init pm_init(void)
-{
- register_sysctl_table(pm_dir_table);
- return 0;
-}
-
-__initcall(pm_init);
-
-/*
- * This is right out of init/main.c
- */
-
-/*
- * This is the number of bits of precision for the loops_per_jiffy.
- * Each bit takes on average 1.5/HZ seconds. This (like the original)
- * is a little better than 1%.
- */
-#define LPS_PREC 8
-
-static void au1000_calibrate_delay(void)
-{
- unsigned long ticks, loopbit;
- int lps_precision = LPS_PREC;
-
- loops_per_jiffy = 1 << 12;
-
- while (loops_per_jiffy <<= 1) {
- /* Wait for "start of" clock tick */
- ticks = jiffies;
- while (ticks == jiffies)
- /* nothing */ ;
- /* Go ... */
- ticks = jiffies;
- __delay(loops_per_jiffy);
- ticks = jiffies - ticks;
- if (ticks)
- break;
- }
-
- /*
- * Do a binary approximation to get loops_per_jiffy set to be equal
- * one clock (up to lps_precision bits)
- */
- loops_per_jiffy >>= 1;
- loopbit = loops_per_jiffy;
- while (lps_precision-- && (loopbit >>= 1)) {
- loops_per_jiffy |= loopbit;
- ticks = jiffies;
- while (ticks == jiffies);
- ticks = jiffies;
- __delay(loops_per_jiffy);
- if (jiffies != ticks) /* longer than 1 tick */
- loops_per_jiffy &= ~loopbit;
- }
-}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
index d555429c8d6f..0191c936cb5e 100644
--- a/arch/mips/alchemy/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
@@ -31,8 +31,6 @@
#include <asm/mach-au1x00/au1000.h>
-extern int au_sleep(void);
-
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06f42a3..3f036b3d400e 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -35,7 +35,6 @@
#include <asm/time.h>
#include <au1000.h>
-#include <prom.h>
extern void __init board_setup(void);
extern void au1000_restart(char *);
@@ -45,80 +44,34 @@ extern void set_cpuspec(void);
void __init plat_mem_setup(void)
{
- struct cpu_spec *sp;
- char *argptr;
- unsigned long prid, cpufreq, bclk;
+ unsigned long est_freq;
- set_cpuspec();
- sp = cur_cpu_spec[0];
+ /* determine core clock */
+ est_freq = au1xxx_calc_clock();
+ est_freq += 5000; /* round */
+ est_freq -= est_freq % 10000;
+ printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
+ est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
- board_setup(); /* board specific setup */
-
- prid = read_c0_prid();
- if (sp->cpu_pll_wo)
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
- cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
-#else
- cpufreq = 396;
-#endif
- else
- cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
- printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
+ _machine_restart = au1000_restart;
+ _machine_halt = au1000_halt;
+ pm_power_off = au1000_power_off;
- if (sp->cpu_bclk) {
- /* Enable BCLK switching */
- bclk = au_readl(SYS_POWERCTRL);
- au_writel(bclk | 0x60, SYS_POWERCTRL);
- printk(KERN_INFO "BCLK switching enabled!\n");
- }
+ board_setup(); /* board specific setup */
- if (sp->cpu_od)
+ if (au1xxx_cpu_needs_config_od())
/* Various early Au1xx0 errata corrected by this */
set_c0_config(1 << 19); /* Set Config[OD] */
else
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
- argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
-#ifdef CONFIG_FB_AU1100
- argptr = strstr(argptr, "video=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
-#endif
- _machine_restart = au1000_restart;
- _machine_halt = au1000_halt;
- pm_power_off = au1000_power_off;
-
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
-
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
- au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
- au_sync();
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
- au_writel(0, SYS_TOYTRIM);
}
#if defined(CONFIG_64BIT_PHYS_ADDR)
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 3006e270c8bc..4f4b16741d12 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -15,16 +15,17 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+ .extern __flush_cache_all
+
.text
- .set macro
- .set noat
+ .set noreorder
+ .set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
-LEAF(save_and_sleep)
-
+LEAF(au1xxx_save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
@@ -33,14 +34,6 @@ LEAF(save_and_sleep)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
- sw $8, PT_R8(sp)
- sw $9, PT_R9(sp)
- sw $10, PT_R10(sp)
- sw $11, PT_R11(sp)
- sw $12, PT_R12(sp)
- sw $13, PT_R13(sp)
- sw $14, PT_R14(sp)
- sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
@@ -49,12 +42,9 @@ LEAF(save_and_sleep)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
- sw $24, PT_R24(sp)
- sw $25, PT_R25(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
- sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
@@ -66,20 +56,26 @@ LEAF(save_and_sleep)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
+ /* flush caches to make sure context is in memory */
+ la t1, __flush_cache_all
+ lw t0, 0(t1)
+ jalr t0
+ nop
+
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
+ * sys_scratch0 : SP
+ * sys_scratch1 : RA
*/
- la k0, 1f
- lui k1, 0xb190
- ori k1, 0x18
- sw sp, 0(k1)
- ori k1, 0x1c
- sw k0, 0(k1)
+ lui t3, 0xb190 /* sys_xxx */
+ sw sp, 0x0018(t3)
+ la k0, 3f /* resume path */
+ sw k0, 0x001c(t3)
-/* Put SDRAM into self refresh. Preload instructions into cache,
- * issue a precharge, then auto refresh, then sleep commands to it.
- */
- la t0, sdsleep
+ /* Put SDRAM into self refresh: Preload instructions into cache,
+ * issue a precharge, auto/self refresh, then sleep commands to it.
+ */
+ la t0, 1f
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
@@ -87,24 +83,57 @@ LEAF(save_and_sleep)
cache 0x14, 96(t0)
.set mips0
-sdsleep:
- lui k0, 0xb400
- sw zero, 0x001c(k0) /* Precharge */
- sw zero, 0x0020(k0) /* Auto refresh */
- sw zero, 0x0030(k0) /* SDRAM sleep */
+1: lui a0, 0xb400 /* mem_xxx */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
+ defined(CONFIG_SOC_AU1500)
+ sw zero, 0x001c(a0) /* Precharge */
+ sync
+ sw zero, 0x0020(a0) /* Auto Refresh */
+ sync
+ sw zero, 0x0030(a0) /* Sleep */
+ sync
+#endif
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ sw zero, 0x08c0(a0) /* Precharge */
sync
+ sw zero, 0x08d0(a0) /* Self Refresh */
+ sync
+
+ /* wait for sdram to enter self-refresh mode */
+ lui t0, 0x0100
+2: lw t1, 0x0850(a0) /* mem_sdstat */
+ and t2, t1, t0
+ beq t2, zero, 2b
+ nop
- lui k1, 0xb190
- sw zero, 0x0078(k1) /* get ready to sleep */
+ /* disable SDRAM clocks */
+ lui t0, 0xcfff
+ ori t0, t0, 0xffff
+ lw t1, 0x0840(a0) /* mem_sdconfiga */
+ and t1, t0, t1 /* clear CE[1:0] */
+ sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
- sw zero, 0x007c(k1) /* Put processor to sleep */
+#endif
+
+ /* put power supply and processor to sleep */
+ sw zero, 0x0078(t3) /* sys_slppwr */
+ sync
+ sw zero, 0x007c(t3) /* sys_sleep */
sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
-1: nop
- lw k0, 0x20(sp)
+3: lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
@@ -113,10 +142,11 @@ sdsleep:
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
- /* We need to catch the ealry Alchemy SOCs with
+ /* We need to catch the early Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
+ nop
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
@@ -124,14 +154,6 @@ sdsleep:
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
- lw $8, PT_R8(sp)
- lw $9, PT_R9(sp)
- lw $10, PT_R10(sp)
- lw $11, PT_R11(sp)
- lw $12, PT_R12(sp)
- lw $13, PT_R13(sp)
- lw $14, PT_R14(sp)
- lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
@@ -140,15 +162,11 @@ sdsleep:
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
- lw $24, PT_R24(sp)
- lw $25, PT_R25(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
- lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
- addiu sp, PT_SIZE
-
jr ra
-END(save_and_sleep)
+ addiu sp, PT_SIZE
+END(au1xxx_save_and_sleep)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 563d9390a872..32880146cbc1 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -1,5 +1,7 @@
/*
+ * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
*
+ * Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
* Copied and modified Carsten Langgaard's time.c
*
@@ -23,244 +25,141 @@
*
* ########################################################################
*
- * Setting up the clock on the MIPS boards.
- *
- * We provide the clock interrupt processing and the timer offset compute
- * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
- * available. -- Dan
+ * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
+ * databooks). Firmware/Board init code must enable the counters in the
+ * counter control register, otherwise the CP0 counter clocksource/event
+ * will be installed instead (and use of 'wait' instruction is prohibited).
*/
-#include <linux/types.h>
-#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <asm/mipsregs.h>
#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
-static int no_au1xxx_32khz;
-extern int allow_au1k_wait; /* default off for CP0 Counter */
-
-#ifdef CONFIG_PM
-#if HZ < 100 || HZ > 1000
-#error "unsupported HZ value! Must be in [100,1000]"
-#endif
-#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
-static unsigned long last_pc0, last_match20;
-#endif
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
-static DEFINE_SPINLOCK(time_lock);
-
-unsigned long wtimer;
+extern int allow_au1k_wait; /* default off for CP0 Counter */
-#ifdef CONFIG_PM
-static irqreturn_t counter0_irq(int irq, void *dev_id)
+static cycle_t au1x_counter1_read(void)
{
- unsigned long pc0;
- int time_elapsed;
- static int jiffie_drift;
-
- if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
- /* should never happen! */
- printk(KERN_WARNING "counter 0 w status error\n");
- return IRQ_NONE;
- }
-
- pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20)
- /* counter overflowed */
- time_elapsed = (0xffffffff - last_match20) + pc0;
- else
- time_elapsed = pc0 - last_match20;
-
- while (time_elapsed > 0) {
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- time_elapsed -= MATCH20_INC;
- last_match20 += MATCH20_INC;
- jiffie_drift++;
- }
-
- last_pc0 = pc0;
- au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
- au_sync();
-
- /*
- * Our counter ticks at 10.009765625 ms/tick, we we're running
- * almost 10 uS too slow per tick.
- */
-
- if (jiffie_drift >= 999) {
- jiffie_drift -= 999;
- do_timer(1); /* increment jiffies by one */
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- }
-
- return IRQ_HANDLED;
+ return au_readl(SYS_RTCREAD);
}
-struct irqaction counter0_action = {
- .handler = counter0_irq,
- .flags = IRQF_DISABLED,
- .name = "alchemy-toy",
- .dev_id = NULL,
+static struct clocksource au1x_counter1_clocksource = {
+ .name = "alchemy-counter1",
+ .read = au1x_counter1_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .rating = 100,
};
-/* When we wakeup from sleep, we have to "catch up" on all of the
- * timer ticks we have missed.
- */
-void wakeup_counter0_adjust(void)
+static int au1x_rtcmatch2_set_next_event(unsigned long delta,
+ struct clock_event_device *cd)
{
- unsigned long pc0;
- int time_elapsed;
-
- pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20)
- /* counter overflowed */
- time_elapsed = (0xffffffff - last_match20) + pc0;
- else
- time_elapsed = pc0 - last_match20;
-
- while (time_elapsed > 0) {
- time_elapsed -= MATCH20_INC;
- last_match20 += MATCH20_INC;
- }
-
- last_pc0 = pc0;
- au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
+ delta += au_readl(SYS_RTCREAD);
+ /* wait for register access */
+ while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M21)
+ ;
+ au_writel(delta, SYS_RTCMATCH2);
au_sync();
+ return 0;
}
-/* This is just for debugging to set the timer for a sleep delay. */
-void wakeup_counter0_set(int ticks)
+static void au1x_rtcmatch2_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *cd)
{
- unsigned long pc0;
-
- pc0 = au_readl(SYS_TOYREAD);
- last_pc0 = pc0;
- au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2);
- au_sync();
}
-#endif
-/*
- * I haven't found anyone that doesn't use a 12 MHz source clock,
- * but just in case.....
- */
-#define AU1000_SRC_CLK 12000000
-
-/*
- * We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32 KHz
- * counter, if it exists. If we don't have an accurate processor
- * speed, all of the peripherals that derive their clocks based on
- * this advertised speed will introduce error and sometimes not work
- * properly. This function is futher convoluted to still allow configurations
- * to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32 KHz when power management
- * "wait" is enabled, and we need to detect if the 32 KHz isn't present
- * but requested......got it? :-) -- Dan
- */
-unsigned long calc_clock(void)
+static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
{
- unsigned long cpu_speed;
- unsigned long flags;
- unsigned long counter;
-
- spin_lock_irqsave(&time_lock, flags);
-
- /* Power management cares if we don't have a 32 KHz counter. */
- no_au1xxx_32khz = 0;
- counter = au_readl(SYS_COUNTER_CNTRL);
- if (counter & SYS_CNTRL_E0) {
- int trim_divide = 16;
-
- au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL);
-
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
- /* RTC now ticks at 32.768/16 kHz */
- au_writel(trim_divide - 1, SYS_RTCTRIM);
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
+ struct clock_event_device *cd = dev_id;
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+}
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
- au_writel(0, SYS_TOYWRITE);
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
- } else
- no_au1xxx_32khz = 1;
+static struct clock_event_device au1x_rtcmatch2_clockdev = {
+ .name = "rtcmatch2",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 100,
+ .irq = AU1000_RTC_MATCH2_INT,
+ .set_next_event = au1x_rtcmatch2_set_next_event,
+ .set_mode = au1x_rtcmatch2_set_mode,
+ .cpumask = CPU_MASK_ALL,
+};
- /*
- * On early Au1000, sys_cpupll was write-only. Since these
- * silicon versions of Au1000 are not sold by AMD, we don't bend
- * over backwards trying to determine the frequency.
- */
- if (cur_cpu_spec[0]->cpu_pll_wo)
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
- cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
-#else
- cpu_speed = 396000000;
-#endif
- else
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
- /* On Alchemy CPU:counter ratio is 1:1 */
- mips_hpt_frequency = cpu_speed;
- /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
- & 0x03) + 2) * 16));
- spin_unlock_irqrestore(&time_lock, flags);
- return cpu_speed;
-}
+static struct irqaction au1x_rtcmatch2_irqaction = {
+ .handler = au1x_rtcmatch2_irq,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .name = "timer",
+ .dev_id = &au1x_rtcmatch2_clockdev,
+};
void __init plat_time_init(void)
{
- unsigned int est_freq = calc_clock();
-
- est_freq += 5000; /* round */
- est_freq -= est_freq%10000;
- printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
- est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
- set_au1x00_speed(est_freq);
- set_au1x00_lcd_clock(); /* program the LCD clock */
+ struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
+ unsigned long t;
+
+ /* Check if firmware (YAMON, ...) has enabled 32kHz and clock
+ * has been detected. If so install the rtcmatch2 clocksource,
+ * otherwise don't bother. Note that both bits being set is by
+ * no means a definite guarantee that the counters actually work
+ * (the 32S bit seems to be stuck set to 1 once a single clock-
+ * edge is detected, hence the timeouts).
+ */
+ if (CNTR_OK != (au_readl(SYS_COUNTER_CNTRL) & CNTR_OK))
+ goto cntr_err;
-#ifdef CONFIG_PM
/*
- * setup counter 0, since it keeps ticking after a
- * 'wait' instruction has been executed. The CP0 timer and
- * counter 1 do NOT continue running after 'wait'
- *
- * It's too early to call request_irq() here, so we handle
- * counter 0 interrupt as a special irq and it doesn't show
- * up under /proc/interrupts.
- *
- * Check to ensure we really have a 32 KHz oscillator before
- * we do this.
+ * setup counter 1 (RTC) to tick at full speed
*/
- if (no_au1xxx_32khz)
- printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
- else {
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(0, SYS_TOYWRITE);
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
-
- au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
- au_writel(~0, SYS_WAKESRC);
- au_sync();
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
+ t = 0xffffff;
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
- /* Setup match20 to interrupt once every HZ */
- last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
- au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
- au_sync();
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
+ au_writel(0, SYS_RTCTRIM); /* 32.768 kHz */
+ au_sync();
- /* We can use the real 'wait' instruction. */
- allow_au1k_wait = 1;
- }
+ t = 0xffffff;
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
+ au_writel(0, SYS_RTCWRITE);
+ au_sync();
-#endif
+ t = 0xffffff;
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
+
+ /* register counter1 clocksource and event device */
+ clocksource_set_clock(&au1x_counter1_clocksource, 32768);
+ clocksource_register(&au1x_counter1_clocksource);
+
+ cd->shift = 32;
+ cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
+ cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
+ clockevents_register_device(cd);
+ setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+
+ printk(KERN_INFO "Alchemy clocksource installed\n");
+
+ /* can now use 'wait' */
+ allow_au1k_wait = 1;
+ return;
+
+cntr_err:
+ /* counters unusable, use C0 counter */
+ r4k_clockevent_init();
+ init_r4k_clocksource();
+ allow_au1k_wait = 0;
}
diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c
deleted file mode 100644
index 847413514964..000000000000
--- a/arch/mips/alchemy/db1x00/init.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * PB1000 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
- return "Alchemy Bosporus Gateway Reference";
-#else
- return "Alchemy Db1x00";
-#endif
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtol(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
new file mode 100644
index 000000000000..730f9f2b30e8
--- /dev/null
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -0,0 +1,18 @@
+#
+# Alchemy Develboards
+#
+
+obj-y += prom.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_MIPS_PB1000) += pb1000/
+obj-$(CONFIG_MIPS_PB1100) += pb1100/
+obj-$(CONFIG_MIPS_PB1200) += pb1200/
+obj-$(CONFIG_MIPS_PB1500) += pb1500/
+obj-$(CONFIG_MIPS_PB1550) += pb1550/
+obj-$(CONFIG_MIPS_DB1000) += db1x00/
+obj-$(CONFIG_MIPS_DB1100) += db1x00/
+obj-$(CONFIG_MIPS_DB1200) += pb1200/
+obj-$(CONFIG_MIPS_DB1500) += db1x00/
+obj-$(CONFIG_MIPS_DB1550) += db1x00/
+obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/
+obj-$(CONFIG_MIPS_MIRAGE) += db1x00/
diff --git a/arch/mips/alchemy/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
index 274db3b55d82..432241ab8677 100644
--- a/arch/mips/alchemy/db1x00/Makefile
+++ b/arch/mips/alchemy/devboards/db1x00/Makefile
@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o irqmap.o
diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 9e5ccbbfcedd..a75ffbf99f25 100644
--- a/arch/mips/alchemy/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,8 +32,20 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
+#include <prom.h>
+
+
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+const char *get_system_type(void)
+{
+#ifdef CONFIG_MIPS_BOSPORUS
+ return "Alchemy Bosporus Gateway Reference";
+#else
+ return "Alchemy Db1x00";
+#endif
+}
+
void board_reset(void)
{
/* Hit BCSR.SW_RESET[RESET] */
@@ -43,6 +55,31 @@ void board_reset(void)
void __init board_setup(void)
{
u32 pin_func = 0;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1100
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
diff --git a/arch/mips/alchemy/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
index 94c090e8bf7a..0b09025087c6 100644
--- a/arch/mips/alchemy/db1x00/irqmap.c
+++ b/arch/mips/alchemy/devboards/db1x00/irqmap.c
@@ -27,6 +27,7 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
@@ -66,21 +67,24 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
- { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
- { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+ { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
+ { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#else
- { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
- { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
- { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
+ { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
+ { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
+ { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
- { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
- { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
- { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+ { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
+ { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
+ { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#else
- { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
+ { AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
#endif
};
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/alchemy/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile
index 99bbec0ca41b..97c6615ba2bb 100644
--- a/arch/mips/alchemy/pb1000/Makefile
+++ b/arch/mips/alchemy/devboards/pb1000/Makefile
@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1000 board.
#
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 25df167a95b3..aed2fdecc709 100644
--- a/arch/mips/alchemy/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -23,22 +23,48 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
#include <linux/delay.h>
-
+#include <linux/init.h>
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1000.h>
+#include <prom.h>
+
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+ { AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
+};
+
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1000";
+}
void board_reset(void)
{
}
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
diff --git a/arch/mips/alchemy/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
index 793e97c49e46..c586dd7e91dc 100644
--- a/arch/mips/alchemy/pb1100/Makefile
+++ b/arch/mips/alchemy/devboards/pb1100/Makefile
@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index c0bfd59a7a36..4df57fae15d4 100644
--- a/arch/mips/alchemy/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -25,19 +25,66 @@
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
+#include <prom.h>
+
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+ { AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
+ { AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
+ { AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
+ { AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
+};
+
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1100";
+}
+
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1100_RST_VDDI);
}
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1100
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
diff --git a/arch/mips/alchemy/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
index d678adf7ce85..c8c3a99fb68a 100644
--- a/arch/mips/alchemy/pb1200/Makefile
+++ b/arch/mips/alchemy/devboards/pb1200/Makefile
@@ -2,7 +2,6 @@
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
-lib-y := init.o board_setup.o irqmap.o
-obj-y += platform.o
+obj-y := board_setup.o irqmap.o platform.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 6cb2115059ad..94e6b7e7753d 100644
--- a/arch/mips/alchemy/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -30,8 +30,11 @@
#include <prom.h>
#include <au1xxx.h>
-extern void _board_init_irq(void);
-extern void (*board_init_irq)(void);
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1200";
+}
void board_reset(void)
{
@@ -41,7 +44,19 @@ void board_reset(void)
void __init board_setup(void)
{
- char *argptr = NULL;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+#ifdef CONFIG_FB_AU1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
#if 0
{
@@ -99,16 +114,6 @@ void __init board_setup(void)
}
#endif
-#ifdef CONFIG_FB_AU1200
- argptr = prom_getcmdline();
-#ifdef CONFIG_MIPS_PB1200
- strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#ifdef CONFIG_MIPS_DB1200
- strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#endif
-
/*
* The Pb1200 development board uses external MUX for PSC0 to
* support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
@@ -124,9 +129,6 @@ void __init board_setup(void)
#ifdef CONFIG_MIPS_DB1200
printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
-
- /* Setup Pb1200 External Interrupt Controller */
- board_init_irq = _board_init_irq;
}
int board_au1200fb_panel(void)
diff --git a/arch/mips/alchemy/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
index 2a505ad8715b..fe47498da280 100644
--- a/arch/mips/alchemy/pb1200/irqmap.c
+++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c
@@ -40,91 +40,65 @@
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
/* This is external interrupt cascade */
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
};
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
* Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
+static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
{
unsigned short bisr = bcsr->int_status;
- int extirq_nr = 0;
-
- /* Clear all the edge interrupts. This has no effect on level. */
- bcsr->int_status = bisr;
- for ( ; bisr; bisr &= bisr - 1) {
- extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
- /* Ack and dispatch IRQ */
- do_IRQ(extirq_nr);
- }
-
- return IRQ_RETVAL(1);
-}
-inline void pb1200_enable_irq(unsigned int irq_nr)
-{
- bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
+ for ( ; bisr; bisr &= bisr - 1)
+ generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
}
-inline void pb1200_disable_irq(unsigned int irq_nr)
+/* NOTE: both the enable and mask bits must be cleared, otherwise the
+ * CPLD generates tons of spurious interrupts (at least on the DB1200).
+ */
+static void pb1200_mask_irq(unsigned int irq_nr)
{
bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
+ au_sync();
}
-static unsigned int pb1200_setup_cascade(void)
-{
- return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
-}
-
-static unsigned int pb1200_startup_irq(unsigned int irq)
+static void pb1200_maskack_irq(unsigned int irq_nr)
{
- if (++pb1200_cascade_en == 1) {
- int res;
-
- res = pb1200_setup_cascade();
- if (res)
- return res;
- }
-
- pb1200_enable_irq(irq);
-
- return 0;
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */
+ au_sync();
}
-static void pb1200_shutdown_irq(unsigned int irq)
+static void pb1200_unmask_irq(unsigned int irq_nr)
{
- pb1200_disable_irq(irq);
- if (--pb1200_cascade_en == 0)
- free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ au_sync();
}
-static struct irq_chip external_irq_type = {
+static struct irq_chip pb1200_cpld_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
#ifdef CONFIG_MIPS_DB1200
.name = "Db1200 Ext",
#endif
- .startup = pb1200_startup_irq,
- .shutdown = pb1200_shutdown_irq,
- .ack = pb1200_disable_irq,
- .mask = pb1200_disable_irq,
- .mask_ack = pb1200_disable_irq,
- .unmask = pb1200_enable_irq,
+ .mask = pb1200_mask_irq,
+ .mask_ack = pb1200_maskack_irq,
+ .unmask = pb1200_unmask_irq,
};
-void _board_init_irq(void)
+void __init board_init_irq(void)
{
unsigned int irq;
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
@@ -146,15 +120,15 @@ void _board_init_irq(void)
panic("Game over. Your score is 0.");
}
#endif
+ /* mask & disable & ack all */
+ bcsr->intclr_mask = 0xffff;
+ bcsr->intclr = 0xffff;
+ bcsr->int_status = 0xffff;
+ au_sync();
- for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
- set_irq_chip_and_handler(irq, &external_irq_type,
- handle_level_irq);
- pb1200_disable_irq(irq);
- }
+ for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
+ set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
+ handle_level_irq, "level");
- /*
- * GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade.
- */
+ set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
}
diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index 95303297c534..95303297c534 100644
--- a/arch/mips/alchemy/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
diff --git a/arch/mips/alchemy/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
index 602f38df20bb..173b419a7479 100644
--- a/arch/mips/alchemy/pb1500/Makefile
+++ b/arch/mips/alchemy/devboards/pb1500/Makefile
@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 035771c6e5b8..fed3b093156a 100644
--- a/arch/mips/alchemy/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -25,20 +25,64 @@
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
+#include <prom.h>
+
+
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
+};
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+ { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+ { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+};
+
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1500";
+}
+
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1500_RST_VDDI);
}
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
void __init board_setup(void)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
diff --git a/arch/mips/alchemy/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
index 7d8beca87fa5..cff95bcdb2ca 100644
--- a/arch/mips/alchemy/pb1550/Makefile
+++ b/arch/mips/alchemy/devboards/pb1550/Makefile
@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index 0ed76b64b6ab..b6e9e7d247a3 100644
--- a/arch/mips/alchemy/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -28,20 +28,54 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
+#include <prom.h>
+
+
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+};
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+ { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
+ { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+};
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1550";
+}
+
void board_reset(void)
{
/* Hit BCSR.SYSTEM[RESET] */
au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
void __init board_setup(void)
{
u32 pin_func;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
new file mode 100644
index 000000000000..d5eb9c325ed0
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -0,0 +1,229 @@
+/*
+ * Alchemy Development Board example suspend userspace interface.
+ *
+ * (c) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/suspend.h>
+#include <linux/sysfs.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/*
+ * Generic suspend userspace interface for Alchemy development boards.
+ * This code exports a few sysfs nodes under /sys/power/db1x/ which
+ * can be used by userspace to en/disable all au1x-provided wakeup
+ * sources and configure the timeout after which the the TOYMATCH2 irq
+ * is to trigger a wakeup.
+ */
+
+
+static unsigned long db1x_pm_sleep_secs;
+static unsigned long db1x_pm_wakemsk;
+static unsigned long db1x_pm_last_wakesrc;
+
+static int db1x_pm_enter(suspend_state_t state)
+{
+ /* enable GPIO based wakeup */
+ au_writel(1, SYS_PININPUTEN);
+
+ /* clear and setup wake cause and source */
+ au_writel(0, SYS_WAKEMSK);
+ au_sync();
+ au_writel(0, SYS_WAKESRC);
+ au_sync();
+
+ au_writel(db1x_pm_wakemsk, SYS_WAKEMSK);
+ au_sync();
+
+ /* setup 1Hz-timer-based wakeup: wait for reg access */
+ while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+ asm volatile ("nop");
+
+ au_writel(au_readl(SYS_TOYREAD) + db1x_pm_sleep_secs, SYS_TOYMATCH2);
+ au_sync();
+
+ /* wait for value to really hit the register */
+ while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+ asm volatile ("nop");
+
+ /* ...and now the sandman can come! */
+ au_sleep();
+
+ return 0;
+}
+
+static int db1x_pm_begin(suspend_state_t state)
+{
+ if (!db1x_pm_wakemsk) {
+ printk(KERN_ERR "db1x: no wakeup source activated!\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void db1x_pm_end(void)
+{
+ /* read and store wakeup source, the clear the register. To
+ * be able to clear it, WAKEMSK must be cleared first.
+ */
+ db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+
+ au_writel(0, SYS_WAKEMSK);
+ au_writel(0, SYS_WAKESRC);
+ au_sync();
+
+}
+
+static struct platform_suspend_ops db1x_pm_ops = {
+ .valid = suspend_valid_only_mem,
+ .begin = db1x_pm_begin,
+ .enter = db1x_pm_enter,
+ .end = db1x_pm_end,
+};
+
+#define ATTRCMP(x) (0 == strcmp(attr->attr.name, #x))
+
+static ssize_t db1x_pmattr_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ int idx;
+
+ if (ATTRCMP(timer_timeout))
+ return sprintf(buf, "%lu\n", db1x_pm_sleep_secs);
+
+ else if (ATTRCMP(timer))
+ return sprintf(buf, "%u\n",
+ !!(db1x_pm_wakemsk & SYS_WAKEMSK_M2));
+
+ else if (ATTRCMP(wakesrc))
+ return sprintf(buf, "%lu\n", db1x_pm_last_wakesrc);
+
+ else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
+ ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
+ ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
+ idx = (attr->attr.name)[4] - '0';
+ return sprintf(buf, "%d\n",
+ !!(db1x_pm_wakemsk & SYS_WAKEMSK_GPIO(idx)));
+
+ } else if (ATTRCMP(wakemsk)) {
+ return sprintf(buf, "%08lx\n", db1x_pm_wakemsk);
+ }
+
+ return -ENOENT;
+}
+
+static ssize_t db1x_pmattr_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *instr,
+ size_t bytes)
+{
+ unsigned long l;
+ int tmp;
+
+ if (ATTRCMP(timer_timeout)) {
+ tmp = strict_strtoul(instr, 0, &l);
+ if (tmp)
+ return tmp;
+
+ db1x_pm_sleep_secs = l;
+
+ } else if (ATTRCMP(timer)) {
+ if (instr[0] != '0')
+ db1x_pm_wakemsk |= SYS_WAKEMSK_M2;
+ else
+ db1x_pm_wakemsk &= ~SYS_WAKEMSK_M2;
+
+ } else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
+ ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
+ ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
+ tmp = (attr->attr.name)[4] - '0';
+ if (instr[0] != '0') {
+ db1x_pm_wakemsk |= SYS_WAKEMSK_GPIO(tmp);
+ } else {
+ db1x_pm_wakemsk &= ~SYS_WAKEMSK_GPIO(tmp);
+ }
+
+ } else if (ATTRCMP(wakemsk)) {
+ tmp = strict_strtoul(instr, 0, &l);
+ if (tmp)
+ return tmp;
+
+ db1x_pm_wakemsk = l & 0x0000003f;
+
+ } else
+ bytes = -ENOENT;
+
+ return bytes;
+}
+
+#define ATTR(x) \
+ static struct kobj_attribute x##_attribute = \
+ __ATTR(x, 0664, db1x_pmattr_show, \
+ db1x_pmattr_store);
+
+ATTR(gpio0) /* GPIO-based wakeup enable */
+ATTR(gpio1)
+ATTR(gpio2)
+ATTR(gpio3)
+ATTR(gpio4)
+ATTR(gpio5)
+ATTR(gpio6)
+ATTR(gpio7)
+ATTR(timer) /* TOYMATCH2-based wakeup enable */
+ATTR(timer_timeout) /* timer-based wakeup timeout value, in seconds */
+ATTR(wakesrc) /* contents of SYS_WAKESRC after last wakeup */
+ATTR(wakemsk) /* direct access to SYS_WAKEMSK */
+
+#define ATTR_LIST(x) & x ## _attribute.attr
+static struct attribute *db1x_pmattrs[] = {
+ ATTR_LIST(gpio0),
+ ATTR_LIST(gpio1),
+ ATTR_LIST(gpio2),
+ ATTR_LIST(gpio3),
+ ATTR_LIST(gpio4),
+ ATTR_LIST(gpio5),
+ ATTR_LIST(gpio6),
+ ATTR_LIST(gpio7),
+ ATTR_LIST(timer),
+ ATTR_LIST(timer_timeout),
+ ATTR_LIST(wakesrc),
+ ATTR_LIST(wakemsk),
+ NULL, /* terminator */
+};
+
+static struct attribute_group db1x_pmattr_group = {
+ .name = "db1x",
+ .attrs = db1x_pmattrs,
+};
+
+/*
+ * Initialize suspend interface
+ */
+static int __init pm_init(void)
+{
+ /* init TOY to tick at 1Hz if not already done. No need to wait
+ * for confirmation since there's plenty of time from here to
+ * the next suspend cycle.
+ */
+ if (au_readl(SYS_TOYTRIM) != 32767) {
+ au_writel(32767, SYS_TOYTRIM);
+ au_sync();
+ }
+
+ db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+
+ au_writel(0, SYS_WAKESRC);
+ au_sync();
+ au_writel(0, SYS_WAKEMSK);
+ au_sync();
+
+ suspend_set_ops(&db1x_pm_ops);
+
+ return sysfs_create_group(power_kobj, &db1x_pmattr_group);
+}
+
+late_initcall(pm_init);
diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/devboards/prom.c
index e1055a13a1a0..0042bd6b1d7d 100644
--- a/arch/mips/alchemy/pb1550/init.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -1,9 +1,9 @@
/*
+ * Common code used by all Alchemy develboards.
*
- * BRIEF MODULE DESCRIPTION
- * Pb1550 board setup
+ * Extracted from files which had this to say:
*
- * Copyright 2001, 2008 MontaVista Software Inc.
+ * Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
@@ -29,15 +29,19 @@
#include <linux/init.h>
#include <linux/kernel.h>
-
#include <asm/bootinfo.h>
-
+#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
-const char *get_system_type(void)
-{
- return "Alchemy Pb1550";
-}
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
+ defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
+ defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000
+
+#else /* Au1550/Au1200-based develboards */
+#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x08000000
+#endif
void __init prom_init(void)
{
@@ -51,8 +55,8 @@ void __init prom_init(void)
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
- memsize = 0x08000000;
+ memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
else
- strict_strtol(memsize_str, 0, &memsize);
+ strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3f8079186cf2..8ed1ae12bc55 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -32,6 +32,8 @@
#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
@@ -43,6 +45,16 @@ void board_reset(void)
void __init board_setup(void)
{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* Enable USB power switch */
au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index 3bae13c28954..5e871c8d9e96 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- strict_strtol(memsize_str, 0, &memsize);
+ strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
index f2bf02951e9c..f1ab12ab3433 100644
--- a/arch/mips/alchemy/mtx-1/irqmap.c
+++ b/arch/mips/alchemy/mtx-1/irqmap.c
@@ -27,7 +27,7 @@
*/
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
@@ -42,11 +42,15 @@ char irq_tab_alchemy[][5] __initdata = {
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
- { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+ { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c
deleted file mode 100644
index 8a9c7d57208d..000000000000
--- a/arch/mips/alchemy/pb1000/init.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Pb1000 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "Alchemy Pb1000";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtol(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c
deleted file mode 100644
index b3d56b0af321..000000000000
--- a/arch/mips/alchemy/pb1000/irqmap.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c
deleted file mode 100644
index 7c6792308bc5..000000000000
--- a/arch/mips/alchemy/pb1100/init.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Pb1100 board setup
- *
- * Copyright 2002, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "Alchemy Pb1100";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg3;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtol(memsize_str, 0, &memsize);
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c
deleted file mode 100644
index 9b7dd8b41283..000000000000
--- a/arch/mips/alchemy/pb1100/irqmap.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xx0 IRQ map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
- { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
- { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
- { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c
deleted file mode 100644
index e9b2a0fd48ae..000000000000
--- a/arch/mips/alchemy/pb1200/init.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * PB1200 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "Alchemy Pb1200";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x08000000;
- else
- strict_strtol(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c
deleted file mode 100644
index 3b6e395cf952..000000000000
--- a/arch/mips/alchemy/pb1500/init.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Pb1500 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "Alchemy Pb1500";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtol(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c
deleted file mode 100644
index 39c4682766a8..000000000000
--- a/arch/mips/alchemy/pb1500/irqmap.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
- { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c
deleted file mode 100644
index a02a4d1fa899..000000000000
--- a/arch/mips/alchemy/pb1550/irqmap.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xx0 IRQ map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4c587acac5c3..a2634fabc50d 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -28,6 +28,8 @@
#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
@@ -38,6 +40,16 @@ void __init board_setup(void)
{
u32 pin_func;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 7516434760a1..456fa142c093 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- strict_strtol(memsize_str, 0, &memsize);
+ strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
index edf06ed11870..0f0f3012e5fd 100644
--- a/arch/mips/alchemy/xxs1500/irqmap.c
+++ b/arch/mips/alchemy/xxs1500/irqmap.c
@@ -27,23 +27,26 @@
*/
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
- { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+ { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+ { AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
- { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
+ { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+ { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
+ { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
+ { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
+ { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
};
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+void __init board_init_irq(void)
+{
+ au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}