diff options
Diffstat (limited to 'arch/blackfin')
108 files changed, 3003 insertions, 1951 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 3640cdc38aac..a60cfe757914 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -223,6 +223,7 @@ endchoice config SMP depends on BF561 + select GENERIC_TIME bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU, @@ -241,12 +242,6 @@ config IRQ_PER_CPU depends on SMP default y -config TICK_SOURCE_SYSTMR0 - bool - select BFIN_GPTIMERS - depends on SMP - default y - config BF_REV_MIN int default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) @@ -263,8 +258,8 @@ config BF_REV_MAX choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM)) - default BF_REV_0_2 if (BF534 || BF536 || BF537) + default BF_REV_0_0 if (BF51x || BF52x) + default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM)) default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 @@ -607,7 +602,6 @@ source kernel/Kconfig.hz config GENERIC_TIME bool "Generic time" - depends on !SMP default y config GENERIC_CLOCKEVENTS @@ -615,12 +609,26 @@ config GENERIC_CLOCKEVENTS depends on GENERIC_TIME default y +choice + prompt "Kernel Tick Source" + depends on GENERIC_CLOCKEVENTS + default TICKSOURCE_CORETMR + +config TICKSOURCE_GPTMR0 + bool "Gptimer0 (SCLK domain)" + select BFIN_GPTIMERS + depends on !IPIPE + +config TICKSOURCE_CORETMR + bool "Core timer (CCLK domain)" + +endchoice + config CYCLES_CLOCKSOURCE - bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Use 'CYCLES' as a clocksource" depends on GENERIC_CLOCKEVENTS depends on !BFIN_SCRATCH_REG_CYCLES - default n + depends on !SMP help If you say Y here, you will enable support for using the 'cycles' registers as a clock source. Doing so means you will be unable to @@ -628,6 +636,11 @@ config CYCLES_CLOCKSOURCE still be able to read it (such as for performance monitoring), but writing the registers will most likely crash the kernel. +config GPTMR0_CLOCKSOURCE + bool "Use GPTimer0 as a clocksource (higher rating)" + depends on GENERIC_CLOCKEVENTS + depends on !TICKSOURCE_GPTMR0 + source kernel/time/Kconfig comment "Misc" @@ -808,7 +821,7 @@ config APP_STACK_L1 config EXCEPTION_L1_SCRATCH bool "Locate exception stack in L1 Scratch Memory" default n - depends on !APP_STACK_L1 && !SYSCALL_TAB_L1 + depends on !APP_STACK_L1 help Whenever an exception occurs, use the L1 Scratch memory for stack storage. You cannot place the stacks of FLAT binaries @@ -872,7 +885,7 @@ config BFIN_GPTIMERS are unsure, say N. To compile this driver as a module, choose M here: the module - will be called gptimers.ko. + will be called gptimers. choice prompt "Uncached DMA region" @@ -901,7 +914,7 @@ config BFIN_ICACHE_LOCK bool "Enable Instruction Cache Locking" choice - prompt "Policy" + prompt "External memory cache policy" depends on BFIN_DCACHE default BFIN_WB if !SMP default BFIN_WT if SMP @@ -942,12 +955,22 @@ config BFIN_WT endchoice -config BFIN_L2_CACHEABLE - bool "Cache L2 SRAM" - depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP)) - default n - help - Select to make L2 SRAM cacheable in L1 data and instruction cache. +choice + prompt "L2 SRAM cache policy" + depends on (BF54x || BF561) + default BFIN_L2_WT +config BFIN_L2_WB + bool "Write back" + depends on !SMP + +config BFIN_L2_WT + bool "Write through" + depends on !SMP + +config BFIN_L2_NOT_CACHED + bool "Not cached" + +endchoice config MPU bool "Enable the memory protection unit (EXPERIMENTAL)" @@ -1011,21 +1034,34 @@ endmenu menu "EBIU_AMBCTL Control" config BANK_0 - hex "Bank 0" + hex "Bank 0 (AMBCTL0.L)" default 0x7BB0 + help + These are the low 16 bits of the EBIU_AMBCTL0 MMR which are + used to control the Asynchronous Memory Bank 0 settings. config BANK_1 - hex "Bank 1" + hex "Bank 1 (AMBCTL0.H)" default 0x7BB0 default 0x5558 if BF54x + help + These are the high 16 bits of the EBIU_AMBCTL0 MMR which are + used to control the Asynchronous Memory Bank 1 settings. config BANK_2 - hex "Bank 2" + hex "Bank 2 (AMBCTL1.L)" default 0x7BB0 + help + These are the low 16 bits of the EBIU_AMBCTL1 MMR which are + used to control the Asynchronous Memory Bank 2 settings. config BANK_3 - hex "Bank 3" + hex "Bank 3 (AMBCTL1.H)" default 0x99B3 + help + These are the high 16 bits of the EBIU_AMBCTL1 MMR which are + used to control the Asynchronous Memory Bank 3 settings. + endmenu config EBIU_MBSCTLVAL diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 79e7e63ab709..1fc4981d486f 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -54,6 +54,19 @@ config DEBUG_HWERR hardware error interrupts and need to know where they are coming from. +config EXACT_HWERR + bool "Try to make Hardware errors exact" + depends on DEBUG_HWERR + help + By default, the Blackfin hardware errors are not exact - the error + be reported multiple cycles after the error happens. This delay + can cause the wrong application, or even the kernel to receive a + signal to be killed. If you are getting HW errors in your system, + try turning this on to ensure they are at least comming from the + proper thread. + + On production systems, it is safe (and a small optimization) to say N. + config DEBUG_DOUBLEFAULT bool "Debug Double Faults" default n diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index c121d6e6e2b8..baec1337f282 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -259,7 +259,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -404,7 +407,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -688,14 +691,14 @@ CONFIG_INPUT_MISC=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y @@ -802,7 +805,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -831,6 +857,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_REGULATOR is not set @@ -962,7 +989,8 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set @@ -988,8 +1016,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1012,8 +1043,8 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_YAFFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1048,9 +1079,9 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y +CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1065,7 +1096,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set +CONFIG_NLS_CODEPAGE_936=m # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set @@ -1074,7 +1105,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1087,7 +1118,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # @@ -1102,7 +1133,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1111,8 +1142,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1132,7 +1161,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # # Tracers @@ -1148,16 +1176,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1269,7 +1301,6 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 3e562b2775d4..c06262e41f7c 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -144,8 +144,8 @@ CONFIG_BF526=y # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 -# CONFIG_BF_REV_0_0 is not set -CONFIG_BF_REV_0_1=y +CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set @@ -264,7 +264,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -409,7 +412,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -491,7 +494,7 @@ CONFIG_MTD_PARTITIONS=y # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m +CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -504,9 +507,9 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y @@ -518,9 +521,10 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -529,7 +533,8 @@ CONFIG_MTD_ROM=m # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -597,9 +602,42 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -644,9 +682,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -715,14 +752,14 @@ CONFIG_INPUT_MISC=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y @@ -832,11 +869,35 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -920,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_REGULATOR is not set @@ -1008,8 +1070,8 @@ CONFIG_USB=y # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set @@ -1037,10 +1099,10 @@ CONFIG_USB_MUSB_SOC=y CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_HDRC_HCD=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set # CONFIG_USB_MUSB_DEBUG is not set # @@ -1058,7 +1120,7 @@ CONFIG_MUSB_DMA_POLL=y # # see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -1107,33 +1169,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_NET2272 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1206,7 +1245,8 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set @@ -1226,14 +1266,19 @@ CONFIG_INOTIFY_USER=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1256,16 +1301,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1277,6 +1312,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1313,7 +1358,7 @@ CONFIG_SMB_FS=m CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1328,7 +1373,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set +CONFIG_NLS_CODEPAGE_936=m # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set @@ -1337,7 +1382,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1350,7 +1395,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # @@ -1365,7 +1410,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1374,8 +1419,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1395,7 +1438,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # # Tracers @@ -1411,16 +1453,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1534,7 +1580,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 911b5dba1dbc..e9175c608aa7 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -145,8 +145,8 @@ CONFIG_BF527=y CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set -CONFIG_BF_REV_0_1=y -# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set @@ -264,7 +264,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -318,7 +321,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -CONFIG_BFIN_GPTIMERS=m +CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -409,7 +412,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -639,9 +642,42 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -687,9 +723,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -758,14 +793,14 @@ CONFIG_INPUT_MISC=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -CONFIG_BF5xx_PPI=m +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y @@ -875,7 +910,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -909,6 +967,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_REGULATOR is not set @@ -1091,8 +1150,8 @@ CONFIG_USB=y # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set @@ -1120,10 +1179,10 @@ CONFIG_USB_MUSB_SOC=y CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_HDRC_HCD=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set # CONFIG_USB_MUSB_DEBUG is not set # @@ -1141,7 +1200,7 @@ CONFIG_MUSB_DMA_POLL=y # # see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -1190,33 +1249,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_NET2272 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1289,7 +1325,8 @@ CONFIG_RTC_DRV_BFIN=y # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set @@ -1309,14 +1346,20 @@ CONFIG_INOTIFY_USER=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1339,16 +1382,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1360,6 +1393,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1396,7 +1439,7 @@ CONFIG_SMB_FS=m CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1411,7 +1454,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set +CONFIG_NLS_CODEPAGE_936=m # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set @@ -1420,7 +1463,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1433,7 +1476,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # @@ -1448,7 +1491,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1457,8 +1500,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1478,7 +1519,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1494,16 +1534,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1611,13 +1655,12 @@ CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 4c41e03efe0f..5aa63bafdd62 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -225,7 +225,10 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -382,7 +385,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -613,9 +616,8 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -667,13 +669,13 @@ CONFIG_INPUT_EVDEV=m # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set @@ -729,7 +731,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -904,16 +929,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -925,6 +940,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1013,7 +1038,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1022,8 +1047,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1043,7 +1066,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1059,16 +1081,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1181,7 +1207,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 9c482cd1b343..fed25329e13c 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -225,7 +225,10 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -382,7 +385,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -618,9 +621,8 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -674,14 +676,14 @@ CONFIG_CONFIG_INPUT_PCF8574=m # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -CONFIG_BF5xx_PPI=m +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set @@ -781,7 +783,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -1068,16 +1093,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1089,6 +1104,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1177,7 +1202,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1186,8 +1211,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1207,7 +1230,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1223,16 +1245,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1345,7 +1371,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 591f6edda4f7..f9ac20d55799 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -232,7 +232,10 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -390,7 +393,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -548,9 +551,7 @@ CONFIG_MTD_ROM=m # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -649,9 +650,8 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -708,14 +708,14 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -CONFIG_BF5xx_PPI=m +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set @@ -823,7 +823,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -1123,16 +1146,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1144,6 +1157,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1232,7 +1255,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1241,8 +1264,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1262,7 +1283,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1278,16 +1298,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1400,7 +1424,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 1a8e8c3adf98..ee98e227b887 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -243,7 +243,10 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -389,7 +392,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -546,9 +549,7 @@ CONFIG_MTD_ROM=m # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -691,11 +692,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set CONFIG_TOUCHSCREEN_AD7879_SPI=y CONFIG_TOUCHSCREEN_AD7879=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -720,14 +721,14 @@ CONFIG_INPUT_MISC=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -CONFIG_BF5xx_PPI=m +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set @@ -833,7 +834,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -1056,16 +1080,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1077,6 +1091,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1165,7 +1189,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1174,8 +1198,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1195,7 +1217,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # # Tracers @@ -1211,16 +1232,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1333,7 +1358,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 2cd1c2b218d7..deeabef8ab80 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -196,6 +196,7 @@ CONFIG_BFIN548_EZKIT=y # BF548 Specific Configuration # # CONFIG_DEB_DMA_URGENT is not set +# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set # # Interrupt Priority Assignment @@ -298,7 +299,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -367,7 +371,9 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_WB=y # CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_CACHEABLE is not set +# CONFIG_BFIN_L2_WB is not set +CONFIG_BFIN_L2_WT=y +# CONFIG_BFIN_L2_NOT_CACHED is not set # CONFIG_MPU is not set # @@ -447,7 +453,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -616,9 +622,7 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -696,7 +700,7 @@ CONFIG_SCSI_DMA=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set @@ -718,9 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set @@ -752,9 +754,8 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -821,11 +822,11 @@ CONFIG_KEYBOARD_BFIN=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -858,14 +859,14 @@ CONFIG_INPUT_MISC=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -CONFIG_BF5xx_PPI=m +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y @@ -977,7 +978,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -1011,6 +1035,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_REGULATOR is not set @@ -1193,8 +1218,8 @@ CONFIG_USB=y # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set @@ -1222,10 +1247,10 @@ CONFIG_USB_MUSB_SOC=y CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_HDRC_HCD=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set # CONFIG_USB_MUSB_DEBUG is not set # @@ -1243,7 +1268,7 @@ CONFIG_MUSB_DMA_POLL=y # # see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -1292,33 +1317,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_NET2272 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1414,13 +1416,8 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1476,16 +1473,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1497,6 +1484,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1539,63 +1536,47 @@ CONFIG_CIFS=y # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set @@ -1611,7 +1592,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1620,8 +1601,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1641,7 +1620,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1657,16 +1635,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1780,7 +1762,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 4a6ea8e31df7..dcfbe2e2931e 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 +# Thu May 21 05:50:01 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -71,7 +72,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -148,9 +148,9 @@ CONFIG_BF_REV_MAX=5 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set -CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set -# CONFIG_BF_REV_0_5 is not set +CONFIG_BF_REV_0_5=y # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set @@ -179,7 +179,6 @@ CONFIG_BFIN561_EZKIT=y # Core B Support # CONFIG_BF561_COREB=y -CONFIG_BF561_COREB_RESET=y # # Interrupt Priority Assignment @@ -264,7 +263,10 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -334,7 +336,9 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_WB=y # CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_CACHEABLE is not set +# CONFIG_BFIN_L2_WB is not set +CONFIG_BFIN_L2_WT=y +# CONFIG_BFIN_L2_NOT_CACHED is not set # CONFIG_MPU is not set # @@ -415,7 +419,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -570,9 +574,7 @@ CONFIG_MTD_ROM=m # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -649,9 +651,8 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -703,13 +704,13 @@ CONFIG_INPUT_EVDEV=m # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set @@ -765,7 +766,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -897,16 +921,6 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -918,6 +932,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1006,7 +1030,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 @@ -1015,8 +1039,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1036,7 +1058,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1052,16 +1073,20 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y -# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set -CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set -# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1174,7 +1199,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index ef1a2c84ace1..174c578b8ec4 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -381,7 +381,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index e2fc588e4336..e17875e8abe8 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -411,7 +411,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -783,7 +783,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index 65a8bbb8d647..fafd95e84b28 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -347,7 +347,7 @@ CONFIG_IP_FIB_HASH=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -547,9 +547,9 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -CONFIG_NETDEV_1000=y +# CONFIG_NETDEV_1000 is not set # CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -641,6 +641,10 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + # # SPI support # diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index 9b7e9d781145..e73aa5af58b9 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.28.10 +# Wed Jun 3 06:27:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,48 +9,44 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -58,37 +55,36 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -102,9 +98,11 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -113,6 +111,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -125,22 +127,31 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -150,7 +161,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -169,11 +179,12 @@ CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set -# CONFIG_GENERIC_BF537_BOARD is not set # # BF537 Specific Configuration @@ -196,6 +207,7 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -215,13 +227,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -248,6 +267,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -256,12 +281,14 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -275,7 +302,6 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_WB=y # CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set # @@ -304,36 +330,28 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # -# PCCARD (PCMCIA/CardBus) support -# - -# # Executable file formats # CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -346,6 +364,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -358,7 +377,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -367,6 +386,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -374,8 +394,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -384,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -393,10 +412,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -404,18 +419,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -427,10 +438,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -438,6 +445,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -450,12 +458,15 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -466,6 +477,10 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -473,7 +488,8 @@ CONFIG_MTD_RAM=y # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_GPIO_ADDR=y CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -498,33 +514,23 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -532,22 +538,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -561,46 +562,44 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -618,15 +617,17 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -655,138 +656,119 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y # -# TPM devices +# Memory mapped GPIO expanders: # -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set # -# SPI support +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# SPI GPIO expanders: # # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # Enable Host or Gadget support to see Inventra options # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -796,20 +778,18 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -835,7 +815,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -848,60 +827,53 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_YAFFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -919,13 +891,95 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -933,11 +987,12 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 569523c1c034..80211303f6b9 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -355,7 +355,7 @@ CONFIG_IP_FIB_HASH=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -556,9 +556,9 @@ CONFIG_SMC91X=y # CONFIG_BFIN_MAC is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -CONFIG_NETDEV_1000=y +# CONFIG_NETDEV_1000 is not set # CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -652,6 +652,10 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + # # SPI support # diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 035b635e599c..dd815f0d1517 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -125,9 +125,9 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BF548=y # CONFIG_BF549 is not set # CONFIG_BF561 is not set -CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set -# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set @@ -422,7 +422,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -811,6 +811,10 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + # # SPI support # diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 7015e42ccce5..16c198bd40c5 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -49,7 +49,7 @@ CONFIG_FAIR_USER_SCHED=y # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -389,7 +389,7 @@ CONFIG_IP_FIB_HASH=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -569,9 +569,9 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y +# CONFIG_NETDEV_1000 is not set # CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -646,6 +646,10 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + # # SPI support # diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index dfc8e1ddd77a..6b4c1a982383 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -48,7 +48,7 @@ CONFIG_SYSFS_DEPRECATED=y # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -347,7 +347,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -594,8 +594,8 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set CONFIG_DM9000=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_AX88180 is not set # diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 95a5f91aebaa..1ec9ae2e964b 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -355,7 +355,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -672,9 +672,9 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set CONFIG_DM9000=y -CONFIG_NETDEV_1000=y +# CONFIG_NETDEV_1000 is not set # CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 78e24080e7f1..09701f907e9b 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.7 +# Linux kernel version: 2.6.28.10 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -40,26 +40,26 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -68,7 +68,6 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -229,7 +228,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -374,7 +376,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -598,9 +600,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_AX88180 is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -640,11 +641,11 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -676,14 +677,14 @@ CONFIG_INPUT_UINPUT=y # Character devices # # CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_TWI_LCD=m -CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_TWI_LCD is not set # CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set CONFIG_DEVKMEM=y @@ -796,6 +797,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -867,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_REGULATOR is not set @@ -1111,6 +1114,7 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set CONFIG_YAFFS_FS=y CONFIG_YAFFS_YAFFS1=y # CONFIG_YAFFS_9BYTE_TAGS is not set @@ -1121,7 +1125,6 @@ CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1213,7 +1216,6 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # # Tracers @@ -1343,7 +1345,6 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 2bc0779d22ea..ec84a53daae9 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -52,7 +52,7 @@ CONFIG_INITRAMFS_SOURCE="" # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -373,7 +373,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y +# CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index e65b3a49214f..6e2796240fdc 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSCTL is not set CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -537,7 +537,30 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 94b2a9b19451..7bbf44e4ddf9 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -208,6 +208,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) #define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#include <asm-generic/atomic.h> +#include <asm-generic/atomic-long.h> #endif /* __ARCH_BLACKFIN_ATOMIC __ */ diff --git a/arch/blackfin/include/asm/bitsperlong.h b/arch/blackfin/include/asm/bitsperlong.h new file mode 100644 index 000000000000..6dc0bb0c13b2 --- /dev/null +++ b/arch/blackfin/include/asm/bitsperlong.h @@ -0,0 +1 @@ +#include <asm-generic/bitsperlong.h> diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 1b040f5b4feb..94697f0f6f40 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -30,7 +30,8 @@ #ifndef _BLACKFIN_CACHEFLUSH_H #define _BLACKFIN_CACHEFLUSH_H -extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address); +#include <asm/blackfin.h> /* for SSYNC() */ + extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address); @@ -54,32 +55,28 @@ extern void blackfin_invalidate_entire_dcache(void); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) - -# if defined(CONFIG_BFIN_WT) - blackfin_icache_flush_range((start), (end)); - flush_icache_range_others(start, end); -# else - blackfin_icache_dcache_flush_range((start), (end)); -# endif - -#else +#if defined(CONFIG_BFIN_WB) + blackfin_dcache_flush_range(start, end); +#endif -# if defined(CONFIG_BFIN_ICACHE) - blackfin_icache_flush_range((start), (end)); + /* Make sure all write buffers in the data side of the core + * are flushed before trying to invalidate the icache. This + * needs to be after the data flush and before the icache + * flush so that the SSYNC does the right thing in preventing + * the instruction prefetcher from hitting things in cached + * memory at the wrong time -- it runs much further ahead than + * the pipeline. + */ + SSYNC(); +#if defined(CONFIG_BFIN_ICACHE) + blackfin_icache_flush_range(start, end); flush_icache_range_others(start, end); -# endif -# if defined(CONFIG_BFIN_DCACHE) - blackfin_dcache_flush_range((start), (end)); -# endif - #endif } #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { memcpy(dst, src, len); \ flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ - flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) @@ -111,6 +108,11 @@ static inline int bfin_addr_dcachable(unsigned long addr) addr >= _ramend && addr < physical_mem_end) return 1; +#ifndef CONFIG_BFIN_L2_NOT_CACHED + if (addr >= L2_START && addr < L2_START + L2_LENGTH) + return 1; +#endif + return 0; } diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index ad566ff9ad16..a75a6a9f0949 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -53,29 +53,32 @@ #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) #endif +#define SDRAM_DNON_CHBL (CPLB_COMMON) +#define SDRAM_EBIU (CPLB_COMMON) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + #define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) #ifdef CONFIG_SMP -#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (CPLB_COMMON | CPLB_LOCK) -#define L2_DMEMORY (CPLB_COMMON | CPLB_LOCK) +#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) +#define L2_IMEMORY (CPLB_COMMON) +#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON) #else -#ifdef CONFIG_BFIN_L2_CACHEABLE -#define L2_IMEMORY (SDRAM_IGENERIC) -#define L2_DMEMORY (SDRAM_DGENERIC) -#else -#define L2_IMEMORY (CPLB_COMMON) -#define L2_DMEMORY (CPLB_COMMON) -#endif /* CONFIG_BFIN_L2_CACHEABLE */ - -#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) +#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) +#define L2_IMEMORY (SDRAM_IGENERIC) + +# if defined(CONFIG_BFIN_L2_WB) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON) +# elif defined(CONFIG_BFIN_L2_WT) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +# elif defined(CONFIG_BFIN_L2_NOT_CACHED) +# define L2_DMEMORY (CPLB_COMMON) +# else +# define L2_DMEMORY (0) +# endif #endif /* CONFIG_SMP */ -#define SDRAM_DNON_CHBL (CPLB_COMMON) -#define SDRAM_EBIU (CPLB_COMMON) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) - #define SIZE_1K 0x00000400 /* 1K */ #define SIZE_4K 0x00001000 /* 4K */ #define SIZE_1M 0x00100000 /* 1M */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index e4f7b8043f02..c9a59622e23f 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -206,10 +206,16 @@ static inline unsigned long get_dma_curr_addr(unsigned int channel) static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize) { + /* Make sure the internal data buffers in the core are drained + * so that the DMA descriptors are completely written when the + * DMA engine goes to fetch them below. + */ + SSYNC(); + + dma_ch[channel].regs->next_desc_ptr = sg; dma_ch[channel].regs->cfg = (dma_ch[channel].regs->cfg & ~(0xf << 8)) | ((ndsize & 0xf) << 8); - dma_ch[channel].regs->next_desc_ptr = sg; } static inline int dma_channel_active(unsigned int channel) @@ -253,5 +259,7 @@ static inline void clear_dma_irqstat(unsigned int channel) void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); void blackfin_dma_early_init(void); +void early_dma_memcpy(void *dest, const void *src, size_t count); +void early_dma_memcpy_done(void); #endif diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index cdbfcfc30f6a..230e1605d3fb 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -55,50 +55,50 @@ do { \ #define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC #define ELF_EXEC_PAGESIZE 4096 -#define R_unused0 0 /* relocation type 0 is not defined */ -#define R_pcrel5m2 1 /*LSETUP part a */ -#define R_unused1 2 /* relocation type 2 is not defined */ -#define R_pcrel10 3 /* type 3, if cc jump <target> */ -#define R_pcrel12_jump 4 /* type 4, jump <target> */ -#define R_rimm16 5 /* type 0x5, rN = <target> */ -#define R_luimm16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */ -#define R_huimm16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */ -#define R_pcrel12_jump_s 8 /* # 0x8 jump.s <target> */ -#define R_pcrel24_jump_x 9 /* # 0x9 jump.x <target> */ -#define R_pcrel24 10 /* # 0xa call <target> , not expandable */ -#define R_unusedb 11 /* # 0xb not generated */ -#define R_unusedc 12 /* # 0xc not used */ -#define R_pcrel24_jump_l 13 /*0xd jump.l <target> */ -#define R_pcrel24_call_x 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */ -#define R_var_eq_symb 15 /* 0xf, linker should treat it same as 0x12 */ -#define R_byte_data 16 /* 0x10, .byte var = symbol */ -#define R_byte2_data 17 /* 0x11, .byte2 var = symbol */ -#define R_byte4_data 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ -#define R_pcrel11 19 /* 0x13, lsetup part b */ -#define R_unused14 20 /* 0x14, undefined */ -#define R_unused15 21 /* not generated by VDSP 3.5 */ +#define R_BFIN_UNUSED0 0 /* relocation type 0 is not defined */ +#define R_BFIN_PCREL5M2 1 /* LSETUP part a */ +#define R_BFIN_UNUSED1 2 /* relocation type 2 is not defined */ +#define R_BFIN_PCREL10 3 /* type 3, if cc jump <target> */ +#define R_BFIN_PCREL12_JUMP 4 /* type 4, jump <target> */ +#define R_BFIN_RIMM16 5 /* type 0x5, rN = <target> */ +#define R_BFIN_LUIMM16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */ +#define R_BFIN_HUIMM16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */ +#define R_BFIN_PCREL12_JUMP_S 8 /* # 0x8 jump.s <target> */ +#define R_BFIN_PCREL24_JUMP_X 9 /* # 0x9 jump.x <target> */ +#define R_BFIN_PCREL24 10 /* # 0xa call <target> , not expandable */ +#define R_BFIN_UNUSEDB 11 /* # 0xb not generated */ +#define R_BFIN_UNUSEDC 12 /* # 0xc not used */ +#define R_BFIN_PCREL24_JUMP_L 13 /* 0xd jump.l <target> */ +#define R_BFIN_PCREL24_CALL_X 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */ +#define R_BFIN_VAR_EQ_SYMB 15 /* 0xf, linker should treat it same as 0x12 */ +#define R_BFIN_BYTE_DATA 16 /* 0x10, .byte var = symbol */ +#define R_BFIN_BYTE2_DATA 17 /* 0x11, .byte2 var = symbol */ +#define R_BFIN_BYTE4_DATA 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ +#define R_BFIN_PCREL11 19 /* 0x13, lsetup part b */ +#define R_BFIN_UNUSED14 20 /* 0x14, undefined */ +#define R_BFIN_UNUSED15 21 /* not generated by VDSP 3.5 */ /* arithmetic relocations */ -#define R_push 0xE0 -#define R_const 0xE1 -#define R_add 0xE2 -#define R_sub 0xE3 -#define R_mult 0xE4 -#define R_div 0xE5 -#define R_mod 0xE6 -#define R_lshift 0xE7 -#define R_rshift 0xE8 -#define R_and 0xE9 -#define R_or 0xEA -#define R_xor 0xEB -#define R_land 0xEC -#define R_lor 0xED -#define R_len 0xEE -#define R_neg 0xEF -#define R_comp 0xF0 -#define R_page 0xF1 -#define R_hwpage 0xF2 -#define R_addr 0xF3 +#define R_BFIN_PUSH 0xE0 +#define R_BFIN_CONST 0xE1 +#define R_BFIN_ADD 0xE2 +#define R_BFIN_SUB 0xE3 +#define R_BFIN_MULT 0xE4 +#define R_BFIN_DIV 0xE5 +#define R_BFIN_MOD 0xE6 +#define R_BFIN_LSHIFT 0xE7 +#define R_BFIN_RSHIFT 0xE8 +#define R_BFIN_AND 0xE9 +#define R_BFIN_OR 0xEA +#define R_BFIN_XOR 0xEB +#define R_BFIN_LAND 0xEC +#define R_BFIN_LOR 0xED +#define R_BFIN_LEN 0xEE +#define R_BFIN_NEG 0xEF +#define R_BFIN_COMP 0xF0 +#define R_BFIN_PAGE 0xF1 +#define R_BFIN_HWPAGE 0xF2 +#define R_BFIN_ADDR 0xF3 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical use of this is to invoke "./ld.so someprog" to test out a new version of diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h index b30a2968e274..ec58efc130e6 100644 --- a/arch/blackfin/include/asm/entry.h +++ b/arch/blackfin/include/asm/entry.h @@ -35,21 +35,39 @@ #else # define LOAD_IPIPE_IPEND #endif + +#ifndef CONFIG_EXACT_HWERR +/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on, + * otherwise it is a waste of cycles. + */ +# ifndef CONFIG_DEBUG_KERNEL +#define INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R0 = (N); \ + LOAD_IPIPE_IPEND \ + jump __common_int_entry; +# else /* CONFIG_DEBUG_KERNEL */ #define INTERRUPT_ENTRY(N) \ [--sp] = SYSCFG; \ - \ [--sp] = P0; /*orig_p0*/ \ [--sp] = R0; /*orig_r0*/ \ [--sp] = (R7:0,P5:0); \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ R0 = (N); \ LOAD_IPIPE_IPEND \ jump __common_int_entry; +# endif /* CONFIG_DEBUG_KERNEL */ /* For timer interrupts, we need to save IPEND, since the user_mode - macro accesses it to determine where to account time. */ + *macro accesses it to determine where to account time. + */ #define TIMER_INTERRUPT_ENTRY(N) \ [--sp] = SYSCFG; \ - \ [--sp] = P0; /*orig_p0*/ \ [--sp] = R0; /*orig_r0*/ \ [--sp] = (R7:0,P5:0); \ @@ -58,6 +76,74 @@ r1 = [p0]; \ R0 = (N); \ jump __common_int_entry; +#else /* CONFIG_EXACT_HWERR is defined */ + +/* if we want hardware error to be exact, we need to do a SSYNC (which forces + * read/writes to complete to the memory controllers), and check to see that + * caused a pending HW error condition. If so, we assume it was caused by user + * space, by setting the same interrupt that we are in (so it goes off again) + * and context restore, and a RTI (without servicing anything). This should + * cause the pending HWERR to fire, and when that is done, this interrupt will + * be re-serviced properly. + * As you can see by the code - we actually need to do two SSYNCS - one to + * make sure the read/writes complete, and another to make sure the hardware + * error is recognized by the core. + */ +#define INTERRUPT_ENTRY(N) \ + SSYNC; \ + SSYNC; \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R1 = ASTAT; \ + P0.L = LO(ILAT); \ + P0.H = HI(ILAT); \ + R0 = [P0]; \ + CC = BITTST(R0, EVT_IVHW_P); \ + IF CC JUMP 1f; \ + ASTAT = R1; \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + LOAD_IPIPE_IPEND \ + jump __common_int_entry; \ +1: ASTAT = R1; \ + RAISE N; \ + (R7:0, P5:0) = [SP++]; \ + SP += 0x8; \ + SYSCFG = [SP++]; \ + CSYNC; \ + RTI; + +#define TIMER_INTERRUPT_ENTRY(N) \ + SSYNC; \ + SSYNC; \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R1 = ASTAT; \ + P0.L = LO(ILAT); \ + P0.H = HI(ILAT); \ + R0 = [P0]; \ + CC = BITTST(R0, EVT_IVHW_P); \ + IF CC JUMP 1f; \ + ASTAT = R1; \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + jump __common_int_entry; \ +1: ASTAT = R1; \ + RAISE N; \ + (R7:0, P5:0) = [SP++]; \ + SP += 0x8; \ + SYSCFG = [SP++]; \ + CSYNC; \ + RTI; +#endif /* CONFIG_EXACT_HWERR */ /* This one pushes RETI without using CLI. Interrupts are enabled. */ #define SAVE_CONTEXT_SYSCALL save_context_syscall diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index b0f847ae4bf4..89f08decb8e0 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -30,6 +30,7 @@ # else # define MAX_BLACKFIN_GPTIMERS 11 # define TIMER8_GROUP_REG TIMER_ENABLE1 +# define TIMER_GROUP2 1 # endif # define TIMER0_GROUP_REG TIMER_ENABLE0 #endif @@ -40,10 +41,12 @@ # define MAX_BLACKFIN_GPTIMERS 12 # define TIMER0_GROUP_REG TMRS8_ENABLE # define TIMER8_GROUP_REG TMRS4_ENABLE +# define TIMER_GROUP2 1 #endif /* * All others: 3 timers: */ +#define TIMER_GROUP1 0 #if !defined(MAX_BLACKFIN_GPTIMERS) # define MAX_BLACKFIN_GPTIMERS 3 # define TIMER0_GROUP_REG TIMER_ENABLE @@ -109,8 +112,8 @@ #define TIMER_ERR_PROG_PER 0x8000 #define TIMER_ERR_PROG_PW 0xC000 #define TIMER_EMU_RUN 0x0200 -#define TIMER_TOGGLE_HI 0x0100 -#define TIMER_CLK_SEL 0x0080 +#define TIMER_TOGGLE_HI 0x0100 +#define TIMER_CLK_SEL 0x0080 #define TIMER_OUT_DIS 0x0040 #define TIMER_TIN_SEL 0x0020 #define TIMER_IRQ_ENA 0x0010 @@ -169,23 +172,25 @@ /* The actual gptimer API */ -void set_gptimer_pwidth (int timer_id, uint32_t width); -uint32_t get_gptimer_pwidth (int timer_id); -void set_gptimer_period (int timer_id, uint32_t period); -uint32_t get_gptimer_period (int timer_id); -uint32_t get_gptimer_count (int timer_id); -uint16_t get_gptimer_intr (int timer_id); -void clear_gptimer_intr (int timer_id); -uint16_t get_gptimer_over (int timer_id); -void clear_gptimer_over (int timer_id); -void set_gptimer_config (int timer_id, uint16_t config); -uint16_t get_gptimer_config (int timer_id); -void set_gptimer_pulse_hi (int timer_id); +void set_gptimer_pwidth(int timer_id, uint32_t width); +uint32_t get_gptimer_pwidth(int timer_id); +void set_gptimer_period(int timer_id, uint32_t period); +uint32_t get_gptimer_period(int timer_id); +uint32_t get_gptimer_count(int timer_id); +int get_gptimer_intr(int timer_id); +void clear_gptimer_intr(int timer_id); +int get_gptimer_over(int timer_id); +void clear_gptimer_over(int timer_id); +void set_gptimer_config(int timer_id, uint16_t config); +uint16_t get_gptimer_config(int timer_id); +int get_gptimer_run(int timer_id); +void set_gptimer_pulse_hi(int timer_id); void clear_gptimer_pulse_hi(int timer_id); -void enable_gptimers (uint16_t mask); -void disable_gptimers (uint16_t mask); -uint16_t get_enabled_gptimers (void); -uint32_t get_gptimer_status (int group); -void set_gptimer_status (int group, uint32_t value); +void enable_gptimers(uint16_t mask); +void disable_gptimers(uint16_t mask); +void disable_gptimers_sync(uint16_t mask); +uint16_t get_enabled_gptimers(void); +uint32_t get_gptimer_status(int group); +void set_gptimer_status(int group, uint32_t value); #endif diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 63b2d8c78570..3022b5c96b37 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -80,19 +80,22 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) +/* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */ +#define __io(port) ((void *)(unsigned long)(port)) + +#define inb(port) readb(__io(port)) +#define inw(port) readw(__io(port)) +#define inl(port) readl(__io(port)) +#define outb(x,port) writeb(x,__io(port)) +#define outw(x,port) writew(x,__io(port)) +#define outl(x,port) writel(x,__io(port)) + +#define inb_p(port) inb(__io(port)) +#define inw_p(port) inw(__io(port)) +#define inl_p(port) inl(__io(port)) +#define outb_p(x,port) outb(x,__io(port)) +#define outw_p(x,port) outw(x,__io(port)) +#define outl_p(x,port) outl(x,__io(port)) #define ioread8_rep(a,d,c) readsb(a,d,c) #define ioread16_rep(a,d,c) readsw(a,d,c) diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 343b56361ec9..51d0bf5e2899 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,10 +35,10 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.9-00" +#define IPIPE_ARCH_STRING "1.9-01" #define IPIPE_MAJOR_NUMBER 1 #define IPIPE_MINOR_NUMBER 9 -#define IPIPE_PATCH_NUMBER 0 +#define IPIPE_PATCH_NUMBER 1 #ifdef CONFIG_SMP #error "I-pipe/blackfin: SMP not implemented" diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 344f6a8c1f22..3ea2016a1d4a 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -81,7 +81,7 @@ extern unsigned long memory_end; #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ ((void *)(kaddr) < (void *)memory_end)) -#include <asm-generic/page.h> +#include <asm-generic/getorder.h> #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index a67142740df0..b42555c1431c 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -64,8 +64,6 @@ struct blackfin_pda { /* Per-processor Data Area */ extern struct blackfin_pda cpu_pda[]; -void reserve_pda(void); - #endif /* __ASSEMBLY__ */ #endif /* _ASM_BLACKFIN_PDA_H */ diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 0eece23b41c7..3040415523b2 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -131,8 +131,8 @@ unsigned long get_wchan(struct task_struct *p); /* Get the Silicon Revision of the chip */ static inline uint32_t __pure bfin_revid(void) { - /* stored in the upper 4 bits */ - uint32_t revid = bfin_read_CHIPID() >> 28; + /* Always use CHIPID, to work around ANOMALY_05000234 */ + uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28; #ifdef CONFIG_BF52x /* ANOMALY_05000357 diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h index 87951d251458..2eea90794454 100644 --- a/arch/blackfin/include/asm/signal.h +++ b/arch/blackfin/include/asm/signal.h @@ -104,7 +104,7 @@ typedef unsigned long sigset_t; #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 -#include <asm-generic/signal.h> +#include <asm-generic/signal-defs.h> #ifdef __KERNEL__ struct old_sigaction { diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h index ddc43ce38533..589e937ed1eb 100644 --- a/arch/blackfin/include/asm/time.h +++ b/arch/blackfin/include/asm/time.h @@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off; extern unsigned int __bfin_cycles_mod; #endif +extern void __init setup_core_timer(void); #endif diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 3248033531e6..8894e9ffbb57 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -59,12 +59,8 @@ static inline int is_in_rom(unsigned long addr) #ifndef CONFIG_ACCESS_CHECK static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } #else -#ifdef CONFIG_ACCESS_OK_L1 -extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); -#else extern int _access_ok(unsigned long addr, unsigned long size); #endif -#endif /* * The exception table consists of pairs of addresses: the first is the @@ -83,9 +79,6 @@ struct exception_table_entry { unsigned long insn, fixup; }; -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. @@ -233,16 +226,29 @@ strncpy_from_user(char *dst, const char *src, long count) } /* - * Return the size of a string (including the ending 0) + * Get the size of a string in user space. + * src: The string to measure + * n: The maximum valid length * - * Return 0 on exception, a value greater than N if too long + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than n. */ -static inline long strnlen_user(const char *src, long n) +static inline long __must_check strnlen_user(const char *src, long n) { - return (strlen(src) + 1); + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return strnlen(src, n) + 1; } -#define strlen_user(str) strnlen_user(str, 32767) +static inline long __must_check strlen_user(const char *src) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return strlen(src) + 1; +} /* * Zero Userspace @@ -251,6 +257,8 @@ static inline long strnlen_user(const char *src, long n) static inline unsigned long __must_check __clear_user(void *to, unsigned long n) { + if (!access_ok(VERIFY_WRITE, to, n)) + return n; memset(to, 0, n); return 0; } diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 8531693fb48d..763ed84ba459 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -20,6 +20,11 @@ #include <asm/dma.h> #include <asm/uaccess.h> +/* + * To make sure we work around 05000119 - we always check DMA_DONE bit, + * never the DMA_RUN bit + */ + struct dma_channel dma_ch[MAX_DMA_CHANNELS]; EXPORT_SYMBOL(dma_ch); @@ -232,6 +237,87 @@ void blackfin_dma_resume(void) void __init blackfin_dma_early_init(void) { bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); +} + +void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) +{ + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + struct dma_register *dst_ch, *src_ch; + + /* We assume that everything is 4 byte aligned, so include + * a basic sanity check + */ + BUG_ON(dst % 4); + BUG_ON(src % 4); + BUG_ON(size % 4); + + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + + src_ch = 0; + /* Find an avalible memDMA channel */ + while (1) { + if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } + + if (!bfin_read16(&src_ch->cfg)) { + break; + } else { + if (bfin_read16(&src_ch->irq_status) & DMA_DONE) + bfin_write16(&src_ch->cfg, 0); + } + + } + + /* Destination */ + bfin_write32(&dst_ch->start_addr, dst); + bfin_write16(&dst_ch->x_count, size >> 2); + bfin_write16(&dst_ch->x_modify, 1 << 2); + bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Source */ + bfin_write32(&src_ch->start_addr, src); + bfin_write16(&src_ch->x_count, size >> 2); + bfin_write16(&src_ch->x_modify, 1 << 2); + bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Enable */ + bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32); + bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32); + + /* Since we are atomic now, don't use the workaround ssync */ + __builtin_bfin_ssync(); +} + +void __init early_dma_memcpy_done(void) +{ + while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) || + (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE))) + continue; + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR); + /* + * Now that DMA is done, we would normally flush cache, but + * i/d cache isn't running this early, so we don't bother, + * and just clear out the DMA channel for next time + */ + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_D1_CONFIG(0); + + __builtin_bfin_ssync(); } /** diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index a0678da40532..beffa00a93c3 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -313,15 +313,6 @@ inline void portmux_setup(unsigned short per) # define portmux_setup(...) do { } while (0) #endif -static int __init bfin_gpio_init(void) -{ - printk(KERN_INFO "Blackfin GPIO Controller\n"); - - return 0; -} -arch_initcall(bfin_gpio_init); - - #ifndef CONFIG_BF54x /*********************************************************** * @@ -1021,15 +1012,6 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) local_irq_save_hw(flags); - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n", - gpio); - local_irq_restore_hw(flags); - return -EBUSY; - } if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { if (system_state == SYSTEM_BOOTING) dump_stack(); diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 01f917d58b59..53e893ff708a 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -16,7 +16,6 @@ EXPORT_SYMBOL(bfin_return_from_exception); /* All the Blackfin cache functions: mach-common/cache.S */ EXPORT_SYMBOL(blackfin_dcache_invalidate_range); -EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); EXPORT_SYMBOL(blackfin_icache_flush_range); EXPORT_SYMBOL(blackfin_dcache_flush_range); EXPORT_SYMBOL(blackfin_dflush_page); diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c index c6ff947f9d37..d5a86c3017f7 100644 --- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) } ctrl = bfin_read_DMEM_CONTROL(); - ctrl |= DMEM_CNTR; + + /* + * Anomaly notes: + * 05000287 - We implement workaround #2 - Change the DMEM_CONTROL + * register, so that the port preferences for DAG0 and DAG1 are set + * to port B + */ + ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0); bfin_write_DMEM_CONTROL(ctrl); SSYNC(); } diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 3e329a6ce041..c006a44527bf 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -64,7 +64,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; icplb_tbl[cpu][i_i].addr = 0; - icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; + icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index c6ff947f9d37..d5a86c3017f7 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) } ctrl = bfin_read_DMEM_CONTROL(); - ctrl |= DMEM_CNTR; + + /* + * Anomaly notes: + * 05000287 - We implement workaround #2 - Change the DMEM_CONTROL + * register, so that the port preferences for DAG0 and DAG1 are set + * to port B + */ + ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0); bfin_write_DMEM_CONTROL(ctrl); SSYNC(); } diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index c8ad051742e2..3302719173ca 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -178,25 +178,15 @@ int __init setup_early_printk(char *buf) asmlinkage void __init init_early_exception_vectors(void) { + u32 evt; SSYNC(); /* cannot program in software: * evt0 - emulation (jtag) * evt1 - reset */ - bfin_write_EVT2(early_trap); - bfin_write_EVT3(early_trap); - bfin_write_EVT5(early_trap); - bfin_write_EVT6(early_trap); - bfin_write_EVT7(early_trap); - bfin_write_EVT8(early_trap); - bfin_write_EVT9(early_trap); - bfin_write_EVT10(early_trap); - bfin_write_EVT11(early_trap); - bfin_write_EVT12(early_trap); - bfin_write_EVT13(early_trap); - bfin_write_EVT14(early_trap); - bfin_write_EVT15(early_trap); + for (evt = EVT2; evt <= EVT15; evt += 4) + bfin_write32(evt, early_trap); CSYNC(); /* Set all the return from interrupt, exception, NMI to a known place diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 3a3e9615b002..7281a91d26b5 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -189,10 +189,10 @@ void set_gptimer_status(int group, uint32_t value) } EXPORT_SYMBOL(set_gptimer_status); -uint16_t get_gptimer_intr(int timer_id) +int get_gptimer_intr(int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0; + return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_intr); @@ -203,10 +203,10 @@ void clear_gptimer_intr(int timer_id) } EXPORT_SYMBOL(clear_gptimer_intr); -uint16_t get_gptimer_over(int timer_id) +int get_gptimer_over(int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0; + return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_over); @@ -217,6 +217,13 @@ void clear_gptimer_over(int timer_id) } EXPORT_SYMBOL(clear_gptimer_over); +int get_gptimer_run(int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]); +} +EXPORT_SYMBOL(get_gptimer_run); + void set_gptimer_config(int timer_id, uint16_t config) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); @@ -244,7 +251,7 @@ void enable_gptimers(uint16_t mask) } EXPORT_SYMBOL(enable_gptimers); -void disable_gptimers(uint16_t mask) +static void _disable_gptimers(uint16_t mask) { int i; uint16_t m = mask; @@ -253,6 +260,12 @@ void disable_gptimers(uint16_t mask) group_regs[i]->disable = m & 0xFF; m >>= 8; } +} + +void disable_gptimers(uint16_t mask) +{ + int i; + _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i]; @@ -260,6 +273,13 @@ void disable_gptimers(uint16_t mask) } EXPORT_SYMBOL(disable_gptimers); +void disable_gptimers_sync(uint16_t mask) +{ + _disable_gptimers(mask); + SSYNC(); +} +EXPORT_SYMBOL(disable_gptimers_sync); + void set_gptimer_pulse_hi(int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index a5de8d45424c..5fc424803a17 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -167,7 +167,7 @@ int __ipipe_check_root(void) void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { struct irq_desc *desc = irq_to_desc(irq); - int prio = desc->ic_prio; + int prio = __ipipe_get_irq_priority(irq); desc->depth = 0; if (ipd != &ipipe_root && @@ -178,8 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc); void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_to_desc(irq); - int prio = desc->ic_prio; + int prio = __ipipe_get_irq_priority(irq); if (ipd != &ipipe_root && atomic_dec_and_test(&__ipipe_irq_lvdepth[prio])) @@ -310,12 +309,16 @@ int ipipe_trigger_irq(unsigned irq) asmlinkage void __ipipe_sync_root(void) { + void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; unsigned long flags; BUG_ON(irqs_disabled()); local_irq_save_hw(flags); + if (irq_tail_hook) + irq_tail_hook(); + clear_thread_flag(TIF_IRQ_SYNC); if (ipipe_root_cpudom_var(irqpend_himask) != 0) diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 401bd32aa499..6e31e935bb31 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -59,12 +59,14 @@ static struct irq_chip bad_chip = { .unmask = dummy_mask_unmask_irq, }; +static int bad_stats; static struct irq_desc bad_irq_desc = { .status = IRQ_DISABLED, .chip = &bad_chip, .handle_irq = handle_bad_irq, .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), + .kstat_irqs = &bad_stats, #ifdef CONFIG_SMP .affinity = CPU_MASK_ALL #endif diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index b163f6d3330d..da28f796ad78 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -466,7 +466,7 @@ static int validate_memory_access_address(unsigned long addr, int size) int cpu = raw_smp_processor_id(); if (size < 0) - return EFAULT; + return -EFAULT; if (addr >= 0x1000 && (addr + size) <= physical_mem_end) return 0; if (addr >= SYSMMR_BASE) @@ -498,7 +498,7 @@ static int validate_memory_access_address(unsigned long addr, int size) if (IN_MEM(addr, size, L2_START, L2_LENGTH)) return 0; - return EFAULT; + return -EFAULT; } /* @@ -508,14 +508,15 @@ static int validate_memory_access_address(unsigned long addr, int size) int kgdb_mem2hex(char *mem, char *buf, int count) { char *tmp; - int err = 0; + int err; unsigned char *pch; unsigned short mmr16; unsigned long mmr32; int cpu = raw_smp_processor_id(); - if (validate_memory_access_address((unsigned long)mem, count)) - return EFAULT; + err = validate_memory_access_address((unsigned long)mem, count); + if (err) + return err; /* * We use the upper half of buf as an intermediate buffer for the @@ -533,7 +534,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count) *tmp++ = *pch++; tmp -= 2; } else - err = EFAULT; + err = -EFAULT; break; case 4: if ((unsigned int)mem % 4 == 0) { @@ -545,10 +546,10 @@ int kgdb_mem2hex(char *mem, char *buf, int count) *tmp++ = *pch++; tmp -= 4; } else - err = EFAULT; + err = -EFAULT; break; default: - err = EFAULT; + err = -EFAULT; } } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP @@ -557,7 +558,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count) ) { /* access L1 instruction SRAM*/ if (dma_memcpy(tmp, mem, count) == NULL) - err = EFAULT; + err = -EFAULT; } else err = probe_kernel_read(tmp, mem, count); @@ -585,24 +586,24 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) char *tmp_new; unsigned short *mmr16; unsigned long *mmr32; - int err = 0; - int size = 0; + int err; + int size; int cpu = raw_smp_processor_id(); tmp_old = tmp_new = buf; - while (count-- > 0) { + for (size = 0; size < count; ++size) { if (*tmp_old == 0x7d) *tmp_new = *(++tmp_old) ^ 0x20; else *tmp_new = *tmp_old; tmp_new++; tmp_old++; - size++; } - if (validate_memory_access_address((unsigned long)mem, size)) - return EFAULT; + err = validate_memory_access_address((unsigned long)mem, size); + if (err) + return err; if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ switch (size) { @@ -611,17 +612,17 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) mmr16 = (unsigned short *)buf; *(unsigned short *)mem = *mmr16; } else - return EFAULT; + err = -EFAULT; break; case 4: if ((unsigned int)mem % 4 == 0) { mmr32 = (unsigned long *)buf; *(unsigned long *)mem = *mmr32; } else - return EFAULT; + err = -EFAULT; break; default: - return EFAULT; + err = -EFAULT; } } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP @@ -630,7 +631,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) ) { /* access L1 instruction SRAM */ if (dma_memcpy(mem, buf, size) == NULL) - err = EFAULT; + err = -EFAULT; } else err = probe_kernel_write(mem, buf, size); @@ -648,10 +649,12 @@ int kgdb_hex2mem(char *buf, char *mem, int count) char *tmp_hex; unsigned short *mmr16; unsigned long *mmr32; + int err; int cpu = raw_smp_processor_id(); - if (validate_memory_access_address((unsigned long)mem, count)) - return EFAULT; + err = validate_memory_access_address((unsigned long)mem, count); + if (err) + return err; /* * We use the upper half of buf as an intermediate buffer for the @@ -673,17 +676,17 @@ int kgdb_hex2mem(char *buf, char *mem, int count) mmr16 = (unsigned short *)tmp_raw; *(unsigned short *)mem = *mmr16; } else - return EFAULT; + err = -EFAULT; break; case 4: if ((unsigned int)mem % 4 == 0) { mmr32 = (unsigned long *)tmp_raw; *(unsigned long *)mem = *mmr32; } else - return EFAULT; + err = -EFAULT; break; default: - return EFAULT; + err = -EFAULT; } } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP @@ -692,10 +695,11 @@ int kgdb_hex2mem(char *buf, char *mem, int count) ) { /* access L1 instruction SRAM */ if (dma_memcpy(mem, tmp_raw, count) == NULL) - return EFAULT; + err = -EFAULT; } else - return probe_kernel_write(mem, tmp_raw, count); - return 0; + err = probe_kernel_write(mem, tmp_raw, count); + + return err; } int kgdb_validate_break_address(unsigned long addr) @@ -715,7 +719,7 @@ int kgdb_validate_break_address(unsigned long addr) if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH)) return 0; - return EFAULT; + return -EFAULT; } int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index 1bd7f2d018a8..d5aee3626688 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -201,8 +201,8 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab, /* Arithmetic relocations are handled. */ /* We do not expect LSETUP to be split and hence is not */ /* handled. */ -/* R_byte and R_byte2 are also not handled as the gas */ -/* does not generate it. */ +/* R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the */ +/* gas does not generate it. */ /*************************************************************************/ int apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, @@ -243,8 +243,8 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, #endif switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_pcrel24: - case R_pcrel24_jump_l: + case R_BFIN_PCREL24: + case R_BFIN_PCREL24_JUMP_L: /* Add the value, subtract its postition */ location16 = (uint16_t *) (sechdrs[sechdrs[relsec].sh_info]. @@ -266,18 +266,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, (*location16 & 0xff00) | (value >> 16 & 0x00ff); *(location16 + 1) = value & 0xffff; break; - case R_pcrel12_jump: - case R_pcrel12_jump_s: + case R_BFIN_PCREL12_JUMP: + case R_BFIN_PCREL12_JUMP_S: value -= (uint32_t) location32; value >>= 1; *location16 = (value & 0xfff); break; - case R_pcrel10: + case R_BFIN_PCREL10: value -= (uint32_t) location32; value >>= 1; *location16 = (value & 0x3ff); break; - case R_luimm16: + case R_BFIN_LUIMM16: pr_debug("before %x after %x\n", *location16, (value & 0xffff)); tmp = (value & 0xffff); @@ -286,7 +286,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, } else *location16 = tmp; break; - case R_huimm16: + case R_BFIN_HUIMM16: pr_debug("before %x after %x\n", *location16, ((value >> 16) & 0xffff)); tmp = ((value >> 16) & 0xffff); @@ -295,10 +295,10 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, } else *location16 = tmp; break; - case R_rimm16: + case R_BFIN_RIMM16: *location16 = (value & 0xffff); break; - case R_byte4_data: + case R_BFIN_BYTE4_DATA: pr_debug("before %x after %x\n", *location32, value); *location32 = value; break; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index e040e03335ea..30d0843ed701 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -322,6 +322,9 @@ void finish_atomic_sections (struct pt_regs *regs) } #if defined(CONFIG_ACCESS_CHECK) +#ifdef CONFIG_ACCESS_OK_L1 +__attribute__((l1_text)) +#endif /* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index a58687bdee6a..80447f99c2b5 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -18,9 +18,12 @@ #include <linux/tty.h> #include <linux/pfn.h> +#ifdef CONFIG_MTD_UCLINUX +#include <linux/mtd/map.h> #include <linux/ext2_fs.h> #include <linux/cramfs_fs.h> #include <linux/romfs_fs.h> +#endif #include <asm/cplb.h> #include <asm/cacheflush.h> @@ -45,6 +48,7 @@ EXPORT_SYMBOL(_ramend); EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX +extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); @@ -150,40 +154,45 @@ void __init bfin_relocate_l1_mem(void) unsigned long l1_data_b_length; unsigned long l2_length; + /* + * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S + * we know that everything about l1 text/data is nice and aligned, + * so copy by 4 byte chunks, and don't worry about overlapping + * src/dest. + * + * We can't use the dma_memcpy functions, since they can call + * scheduler functions which might be in L1 :( and core writes + * into L1 instruction cause bad access errors, so we are stuck, + * we are required to use DMA, but can't use the common dma + * functions. We can't use memcpy either - since that might be + * going to be in the relocated L1 + */ + blackfin_dma_early_init(); + /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ l1_code_length = _etext_l1 - _stext_l1; - if (l1_code_length > L1_CODE_LENGTH) - panic("L1 Instruction SRAM Overflow\n"); - /* cannot complain as printk is not available as yet. - * But we can continue booting and complain later! - */ - - /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ - dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + if (l1_code_length) + early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ l1_data_a_length = _sbss_l1 - _sdata_l1; - if (l1_data_a_length > L1_DATA_A_LENGTH) - panic("L1 Data SRAM Bank A Overflow\n"); - - /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ - dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + if (l1_data_a_length) + early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; - if (l1_data_b_length > L1_DATA_B_LENGTH) - panic("L1 Data SRAM Bank B Overflow\n"); - - /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ - dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + + if (l1_data_b_length) + early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); + early_dma_memcpy_done(); + + /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */ if (L2_LENGTH != 0) { l2_length = _sbss_l2 - _stext_l2; - if (l2_length > L2_LENGTH) - panic("L2 SRAM Overflow\n"); - - /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ - dma_memcpy(_stext_l2, _l2_lma_start, l2_length); + if (l2_length) + memcpy(_stext_l2, _l2_lma_start, l2_length); } } @@ -472,7 +481,7 @@ static __init void memory_setup(void) if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) { console_init(); - panic("DMA region exceeds memory limit: %lu.\n", + panic("DMA region exceeds memory limit: %lu.", _ramend - _ramstart); } memory_end = _ramend - DMA_UNCACHED_REGION; @@ -526,14 +535,13 @@ static __init void memory_setup(void) if (mtd_size == 0) { console_init(); - panic("Don't boot kernel without rootfs attached.\n"); + panic("Don't boot kernel without rootfs attached."); } /* Relocate MTD image to the top of memory after the uncached memory area */ - dma_memcpy((char *)memory_end, _end, mtd_size); - - memory_mtd_start = memory_end; - _ebss = memory_mtd_start; /* define _ebss for compatible */ + uclinux_ram_map.phys = memory_mtd_start = memory_end; + uclinux_ram_map.size = mtd_size; + dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) @@ -796,10 +804,8 @@ void __init setup_arch(char **cmdline_p) cclk = get_cclk(); sclk = get_sclk(); -#if !defined(CONFIG_BFIN_KERNEL_CLOCK) - if (ANOMALY_05000273 && cclk == sclk) - panic("ANOMALY 05000273, SCLK can not be same as CCLK"); -#endif + if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk) + panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK"); #ifdef BF561_FAMILY if (ANOMALY_05000266) { @@ -881,7 +887,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", bfin_compiled_revid(), bfin_revid()); if (bfin_compiled_revid() > bfin_revid()) - panic("Error: you are missing anomaly workarounds for this rev\n"); + panic("Error: you are missing anomaly workarounds for this rev"); } } if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) @@ -891,16 +897,13 @@ void __init setup_arch(char **cmdline_p) /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448\n"); + panic("You can't run on this processor due to 05000448"); printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", cclk / 1000000, sclk / 1000000); - if (ANOMALY_05000273 && (cclk >> 1) <= sclk) - printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); - setup_bootmem_allocator(); paging_init(); diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index fce49d7cf001..a8f1329c15a4 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -78,11 +78,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, return do_mmap2(addr, len, prot, flags, fd, pgoff); } -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags) { return sram_alloc_with_lsl(size, flags); diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 27646121280a..0791eba40d9f 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -20,8 +20,9 @@ #include <asm/blackfin.h> #include <asm/time.h> +#include <asm/gptimers.h> -#ifdef CONFIG_CYCLES_CLOCKSOURCE +#if defined(CONFIG_CYCLES_CLOCKSOURCE) /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) @@ -58,15 +59,15 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc) return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; } -static cycle_t read_cycles(struct clocksource *cs) +static cycle_t bfin_read_cycles(struct clocksource *cs) { return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); } -static struct clocksource clocksource_bfin = { - .name = "bfin_cycles", +static struct clocksource bfin_cs_cycles = { + .name = "bfin_cs_cycles", .rating = 350, - .read = read_cycles, + .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = { unsigned long long sched_clock(void) { - return cycles_2_ns(read_cycles(&clocksource_bfin)); + return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles)); } -static int __init bfin_clocksource_init(void) +static int __init bfin_cs_cycles_init(void) { set_cyc2ns_scale(get_cclk() / 1000); - clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift); + bfin_cs_cycles.mult = \ + clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); - if (clocksource_register(&clocksource_bfin)) + if (clocksource_register(&bfin_cs_cycles)) panic("failed to register clocksource"); return 0; } +#else +# define bfin_cs_cycles_init() +#endif + +#ifdef CONFIG_GPTMR0_CLOCKSOURCE + +void __init setup_gptimer0(void) +{ + disable_gptimers(TIMER0bit); + + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, -1); + set_gptimer_pwidth(TIMER0_id, -2); + SSYNC(); + enable_gptimers(TIMER0bit); +} + +static cycle_t bfin_read_gptimer0(void) +{ + return bfin_read_TIMER0_COUNTER(); +} + +static struct clocksource bfin_cs_gptimer0 = { + .name = "bfin_cs_gptimer0", + .rating = 400, + .read = bfin_read_gptimer0, + .mask = CLOCKSOURCE_MASK(32), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init bfin_cs_gptimer0_init(void) +{ + setup_gptimer0(); + bfin_cs_gptimer0.mult = \ + clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift); + + if (clocksource_register(&bfin_cs_gptimer0)) + panic("failed to register clocksource"); + + return 0; +} #else -# define bfin_clocksource_init() +# define bfin_cs_gptimer0_init() #endif +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t timer_interrupt(int irq, void *dev_id); + +static int bfin_timer_set_next_event(unsigned long, \ + struct clock_event_device *); + +static void bfin_timer_set_mode(enum clock_event_mode, \ + struct clock_event_device *); + +static struct clock_event_device clockevent_bfin = { +#if defined(CONFIG_TICKSOURCE_GPTMR0) + .name = "bfin_gptimer0", + .rating = 300, + .irq = IRQ_TIMER0, +#else + .name = "bfin_core_timer", + .rating = 350, + .irq = IRQ_CORETMR, +#endif + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = bfin_timer_set_next_event, + .set_mode = bfin_timer_set_mode, +}; + +static struct irqaction bfin_timer_irq = { +#if defined(CONFIG_TICKSOURCE_GPTMR0) + .name = "Blackfin GPTimer0", +#else + .name = "Blackfin CoreTimer", +#endif + .flags = IRQF_DISABLED | IRQF_TIMER | \ + IRQF_IRQPOLL | IRQF_PERCPU, + .handler = timer_interrupt, + .dev_id = &clockevent_bfin, +}; + +#if defined(CONFIG_TICKSOURCE_GPTMR0) static int bfin_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { + disable_gptimers(TIMER0bit); + + /* it starts counting three SCLK cycles after the TIMENx bit is set */ + set_gptimer_pwidth(TIMER0_id, cycles - 3); + enable_gptimers(TIMER0bit); + return 0; +} + +static void bfin_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: { + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_IRQ_ENA | \ + TIMER_PERIOD_CNT | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, get_sclk() / HZ); + set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1); + enable_gptimers(TIMER0bit); + break; + } + case CLOCK_EVT_MODE_ONESHOT: + disable_gptimers(TIMER0bit); + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, 0); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + disable_gptimers(TIMER0bit); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static void bfin_timer_ack(void) +{ + set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0); +} + +static void __init bfin_timer_init(void) +{ + disable_gptimers(TIMER0bit); +} + +static unsigned long __init bfin_clockevent_check(void) +{ + setup_irq(IRQ_TIMER0, &bfin_timer_irq); + return get_sclk(); +} + +#else /* CONFIG_TICKSOURCE_CORETMR */ + +static int bfin_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + bfin_write_TCNTL(TMPWR); + CSYNC(); bfin_write_TCOUNT(cycles); CSYNC(); + bfin_write_TCNTL(TMPWR | TMREN); return 0; } static void bfin_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: { unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); bfin_write_TCNTL(TMPWR); - bfin_write_TSCALE(TIME_SCALE - 1); CSYNC(); + bfin_write_TSCALE(TIME_SCALE - 1); bfin_write_TPERIOD(tcount); bfin_write_TCOUNT(tcount); - bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); CSYNC(); + bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); break; } case CLOCK_EVT_MODE_ONESHOT: + bfin_write_TCNTL(TMPWR); + CSYNC(); bfin_write_TSCALE(TIME_SCALE - 1); + bfin_write_TPERIOD(0); bfin_write_TCOUNT(0); - bfin_write_TCNTL(TMPWR | TMREN); - CSYNC(); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: @@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode, } } +static void bfin_timer_ack(void) +{ +} + static void __init bfin_timer_init(void) { /* power up the timer, but don't enable it just yet */ @@ -145,38 +295,32 @@ static void __init bfin_timer_init(void) bfin_write_TPERIOD(0); bfin_write_TCOUNT(0); - /* now enable the timer */ CSYNC(); } +static unsigned long __init bfin_clockevent_check(void) +{ + setup_irq(IRQ_CORETMR, &bfin_timer_irq); + return get_cclk() / TIME_SCALE; +} + +void __init setup_core_timer(void) +{ + bfin_timer_init(); + bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL); +} +#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -#ifdef CONFIG_CORE_TIMER_IRQ_L1 -__attribute__((l1_text)) -#endif -irqreturn_t timer_interrupt(int irq, void *dev_id); - -static struct clock_event_device clockevent_bfin = { - .name = "bfin_core_timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_next_event = bfin_timer_set_next_event, - .set_mode = bfin_timer_set_mode, -}; - -static struct irqaction bfin_timer_irq = { - .name = "Blackfin Core Timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = timer_interrupt, - .dev_id = &clockevent_bfin, -}; - irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; + smp_mb(); evt->event_handler(evt); + bfin_timer_ack(); return IRQ_HANDLED; } @@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void) { unsigned long timer_clk; - timer_clk = get_cclk() / TIME_SCALE; + timer_clk = bfin_clockevent_check(); - setup_irq(IRQ_CORETMR, &bfin_timer_irq); bfin_timer_init(); clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift); @@ -218,6 +361,7 @@ void __init time_init(void) xtime.tv_nsec = 0; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - bfin_clocksource_init(); + bfin_cs_cycles_init(); + bfin_cs_gptimer0_init(); bfin_clockevent_init(); } diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 1bbacfbd4c5d..adb54aa7d7c8 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -24,14 +24,10 @@ static struct irqaction bfin_timer_irq = { .name = "Blackfin Timer Tick", -#ifdef CONFIG_IRQ_PER_CPU - .flags = IRQF_DISABLED | IRQF_PERCPU, -#else .flags = IRQF_DISABLED -#endif }; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) void __init setup_system_timer0(void) { /* Power down the core timer, just to play safe. */ @@ -74,7 +70,7 @@ void __init setup_core_timer(void) static void __init time_sched_init(irqreturn_t(*timer_routine) (int, void *)) { -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) setup_system_timer0(); bfin_timer_irq.handler = timer_routine; setup_irq(IRQ_TIMER0, &bfin_timer_irq); @@ -94,7 +90,7 @@ static unsigned long gettimeoffset(void) unsigned long offset; unsigned long clocks_per_jiffy; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) clocks_per_jiffy = bfin_read_TIMER0_PERIOD(); offset = bfin_read_TIMER0_COUNTER() / \ (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); @@ -133,36 +129,25 @@ irqreturn_t timer_interrupt(int irq, void *dummy) static long last_rtc_update; write_seqlock(&xtime_lock); -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) + do_timer(1); + /* - * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is - * enabled. + * If we have an externally synchronized Linux clock, then update + * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. */ - if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { -#endif - do_timer(1); - - /* - * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / NSEC_PER_USEC) >= - 500000 - ((unsigned)TICK_SIZE) / 2 - && (xtime.tv_nsec / NSEC_PER_USEC) <= - 500000 + ((unsigned)TICK_SIZE) / 2) { - if (set_rtc_mmss(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* Do it again in 60s. */ - last_rtc_update = xtime.tv_sec - 600; - } -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) - set_gptimer_status(0, TIMER_STATUS_TIMIL0); + if (ntp_synced() && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / NSEC_PER_USEC) >= + 500000 - ((unsigned)TICK_SIZE) / 2 + && (xtime.tv_nsec / NSEC_PER_USEC) <= + 500000 + ((unsigned)TICK_SIZE) / 2) { + if (set_rtc_mmss(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + /* Do it again in 60s. */ + last_rtc_update = xtime.tv_sec - 600; } -#endif write_sequnlock(&xtime_lock); #ifdef CONFIG_IPIPE diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ffe7fb53eccb..aa76dfb0226e 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -68,6 +68,13 @@ ({ if (0) printk(fmt, ##arg); 0; }) #endif +#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE) +u32 last_seqstat; +#ifdef CONFIG_DEBUG_MMRS_MODULE +EXPORT_SYMBOL(last_seqstat); +#endif +#endif + /* Initiate the event table handler */ void __init trap_init(void) { @@ -79,7 +86,6 @@ void __init trap_init(void) static void decode_address(char *buf, unsigned long address) { #ifdef CONFIG_DEBUG_VERBOSE - struct vm_list_struct *vml; struct task_struct *p; struct mm_struct *mm; unsigned long flags, offset; @@ -196,6 +202,11 @@ done: asmlinkage void double_fault_c(struct pt_regs *fp) { +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int j; + trace_buffer_save(j); +#endif + console_verbose(); oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE @@ -220,9 +231,10 @@ asmlinkage void double_fault_c(struct pt_regs *fp) dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); + dump_bfin_trace_buffer(); } #endif - panic("Double Fault - unrecoverable event\n"); + panic("Double Fault - unrecoverable event"); } @@ -239,6 +251,9 @@ asmlinkage void trap_c(struct pt_regs *fp) unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; trace_buffer_save(j); +#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE) + last_seqstat = (u32)fp->seqstat; +#endif /* Important - be very careful dereferncing pointers - will lead to * double faults if the stack has become corrupt @@ -588,6 +603,9 @@ asmlinkage void trap_c(struct pt_regs *fp) force_sig_info(sig, &info, current); } + if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) + fp->pc = SAFE_USER_INSTRUCTION; + trace_buffer_restore(j); return; } @@ -832,6 +850,11 @@ void show_stack(struct task_struct *task, unsigned long *stack) decode_address(buf, (unsigned int)stack); printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); + if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) { + printk(KERN_NOTICE "Invalid stack pointer\n"); + return; + } + /* First thing is to look for a frame pointer */ for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { if (*addr & 0x1) @@ -1066,6 +1089,29 @@ void show_regs(struct pt_regs *fp) unsigned int cpu = smp_processor_id(); unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + verbose_printk(KERN_NOTICE "\n"); + if (CPUID != bfin_cpuid()) + verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), " + "but running on:0x%04x (Rev %d)\n", + CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid()); + + verbose_printk(KERN_NOTICE "ADSP-%s-0.%d", + CPU, bfin_compiled_revid()); + + if (bfin_compiled_revid() != bfin_revid()) + verbose_printk("(Detected 0.%d)", bfin_revid()); + + verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n", + get_cclk()/1000000, get_sclk()/1000000, +#ifdef CONFIG_MPU + "mpu on" +#else + "mpu off" +#endif + ); + + verbose_printk(KERN_NOTICE "%s", linux_banner); + verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", (long)fp->seqstat, fp->ipend, fp->syscfg); @@ -1246,5 +1292,5 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) dump_bfin_mem(fp); show_regs(fp); dump_stack(); - panic("Unrecoverable event\n"); + panic("Unrecoverable event"); } diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 27952ae047d8..8b67167cb4f4 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -50,7 +50,9 @@ SECTIONS _text = .; __stext = .; TEXT_TEXT +#ifndef CONFIG_SCHEDULE_L1 SCHED_TEXT +#endif LOCK_TEXT KPROBES_TEXT *(.text.*) @@ -180,6 +182,9 @@ SECTIONS . = ALIGN(4); __stext_l1 = .; *(.l1.text) +#ifdef CONFIG_SCHEDULE_L1 + SCHED_TEXT +#endif . = ALIGN(4); __etext_l1 = .; } diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index f397ede006bf..4c76fefb7a3b 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -156,6 +156,7 @@ config IRQ_PORTH_INTB default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 41f2eacfef20..62bba09bcce6 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -82,7 +82,11 @@ static struct physmap_flash_data ezbrd_flash_data = { static struct resource ezbrd_flash_resource = { .start = 0x20000000, +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + .end = 0x202fffff, +#else .end = 0x203fffff, +#endif .flags = IORESOURCE_MEM, }; @@ -162,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -249,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -514,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, @@ -678,6 +682,11 @@ static int __init ezbrd_init(void) ARRAY_SIZE(bfin_i2c_board_info)); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + /* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */ + peripheral_request(P_AMS2, "ParaFlash"); +#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE) + peripheral_request(P_AMS3, "ParaFlash"); +#endif return 0; } diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index c847bb101076..b69bd9af38dd 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -6,14 +6,19 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ +/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ +#if __SILICON_REVISION__ < 0 +# error will not work on BF518 silicon version +#endif + #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) @@ -47,7 +52,7 @@ #define ANOMALY_05000435 (1) /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ #define ANOMALY_05000438 (1) -/* Preboot Cannot be Used to Program the PLL_DIV Register */ +/* Preboot Cannot be Used to Alter the PLL_DIV Register */ #define ANOMALY_05000439 (1) /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ #define ANOMALY_05000440 (1) @@ -61,32 +66,56 @@ #define ANOMALY_05000453 (1) /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ #define ANOMALY_05000455 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000119 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) +#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index f618b487b2b0..a0fc77fd3315 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -185,6 +185,10 @@ #define P_PTP_PPS (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) #define P_PTP_CLKOUT (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) -#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1)) +/* AMS */ +#define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) + +#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1)) #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 8438ec6d6679..848ac6f86823 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -170,6 +170,7 @@ config IRQ_PORTH_INTB default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 48e69eecdba4..6d6f9effa0bb 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), .type = "pcf8574_lcd", diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 7fe480e4ebe8..1435c5d38cd5 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index d0864111ef59..147edd1eb1ad 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -509,6 +509,13 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_PBX) static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { .ctl_reg = 0x4, /* send zero */ @@ -593,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -624,6 +631,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) + { + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 3, + .controller_data = &mmc_spi_chip_info, + .mode = SPI_MODE_0, + }, +#endif + #if defined(CONFIG_PBX) { .modalias = "fxs-spi", @@ -836,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index df6808d8a6ef..c84ddea95749 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -6,14 +6,19 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: - * - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List +/* This file should be up to date with: + * - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ +/* We do not support old silicon - sorry */ +#if __SILICON_REVISION__ < 0 +# error will not work on BF526/BF527 silicon version +#endif + #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) # define ANOMALY_BF526 1 #else @@ -25,158 +30,203 @@ # define ANOMALY_BF527 0 #endif -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526) +#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527) +#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527)) + +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ -#define ANOMALY_05000313 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000328 (_ANOMALY_BF527(< 2)) +/* Host DMA Boot Modes Are Not Functional */ +#define ANOMALY_05000330 (__SILICON_REVISION__ < 2) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000337 (_ANOMALY_BF527(< 2)) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ -#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000341 (_ANOMALY_BF527(< 2)) /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ -#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000342 (_ANOMALY_BF527(< 2)) /* USB Calibration Value Is Not Initialized */ -#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2)) /* USB Calibration Value to use */ #define ANOMALY_05000346_value 0xE510 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000347 (_ANOMALY_BF527(< 2)) /* Security Features Are Not Functional */ -#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1) +#define ANOMALY_05000348 (_ANOMALY_BF527(< 1)) /* bfrom_SysControl() Firmware Function Performs Improper System Reset */ -#define ANOMALY_05000353 (ANOMALY_BF526) +#define ANOMALY_05000353 (_ANOMALY_BF526(< 1)) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ -#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000355 (_ANOMALY_BF527(< 2)) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000357 (_ANOMALY_BF527(< 2)) /* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1) +#define ANOMALY_05000364 (_ANOMALY_BF527(== 1)) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Incorrect Default CSEL Value in PLL_DIV */ -#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000368 (_ANOMALY_BF527(< 2)) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000371 (_ANOMALY_BF527(< 2)) /* Authentication Fails To Initiate */ -#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000376 (_ANOMALY_BF527(< 2)) /* Data Read From L3 Memory by USB DMA May be Corrupted */ -#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000380 (_ANOMALY_BF527(< 2)) /* 8-Bit NAND Flash Boot Mode Not Functional */ -#define ANOMALY_05000382 (__SILICON_REVISION__ < 2) -/* Host Must Not Read Back During Host DMA Boot */ -#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Boot from OTP Memory Not Functional */ -#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000385 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Routine Not Functional */ -#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000386 (_ANOMALY_BF527(< 2)) /* Programmable Preboot Settings Not Functional */ -#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000387 (_ANOMALY_BF527(< 2)) /* CRC32 Checksum Support Not Functional */ -#define ANOMALY_05000388 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Reset Vector Must Not Be in SDRAM Memory Space */ -#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000389 (_ANOMALY_BF527(< 2)) /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000392 (_ANOMALY_BF527(< 2)) /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000393 (_ANOMALY_BF527(< 2)) /* Log Buffer Not Functional */ -#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000394 (_ANOMALY_BF527(< 2)) /* Hook Routine Not Functional */ -#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000395 (_ANOMALY_BF527(< 2)) /* Header Indirect Bit Not Functional */ -#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000396 (_ANOMALY_BF527(< 2)) /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ -#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000397 (_ANOMALY_BF527(< 2)) /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */ -#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000398 (_ANOMALY_BF527(< 2)) /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */ -#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000399 (_ANOMALY_BF527(< 2)) /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ -#define ANOMALY_05000401 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ -#define ANOMALY_05000403 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox SESR Disallows Certain User Interrupts */ -#define ANOMALY_05000404 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox SESR Firmware Does Not Save/Restore Full Context */ #define ANOMALY_05000405 (1) /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */ -#define ANOMALY_05000407 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */ #define ANOMALY_05000408 (1) /* Lockbox firmware leaves MDMA0 channel enabled */ -#define ANOMALY_05000409 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Incorrect Default Internal Voltage Regulator Setting */ -#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000410 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ -#define ANOMALY_05000411 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2)) /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ -#define ANOMALY_05000414 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2)) /* DEB2_URGENT Bit Not Functional */ -#define ANOMALY_05000415 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_05000416 (1) /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */ -#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) -/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */ -#define ANOMALY_05000418 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000417 (_ANOMALY_BF527(< 2)) +/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */ +#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2)) /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */ -#define ANOMALY_05000420 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2)) /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */ #define ANOMALY_05000421 (1) /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */ -#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1)) /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */ -#define ANOMALY_05000423 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Internal Voltage Regulator Not Trimmed */ -#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000424 (_ANOMALY_BF527(< 2)) /* Multichannel SPORT Channel Misalignment Under Specific Configuration */ -#define ANOMALY_05000425 (__SILICON_REVISION__ < 2) -/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */ +#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2)) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */ -#define ANOMALY_05000429 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Software System Reset Corrupts PLL_LOCKCNT Register */ -#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +#define ANOMALY_05000430 (_ANOMALY_BF527(> 1)) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (1) /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ -#define ANOMALY_05000432 (ANOMALY_BF526) +#define ANOMALY_05000432 (_ANOMALY_BF526(< 1)) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ -#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527) +#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* Preboot Cannot be Used to Alter the PLL_DIV Register */ +#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ +#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (_ANOMALY_BF527(< 1)) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* The WURESET Bit in the SYSCR Register is not Functional */ +#define ANOMALY_05000445 (1) +/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ +#define ANOMALY_05000451 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0)) +/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ +#define ANOMALY_05000456 (1) +/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ +#define ANOMALY_05000457 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig index 14427de7d77f..4c572443147e 100644 --- a/arch/blackfin/mach-bf533/Kconfig +++ b/arch/blackfin/mach-bf533/Kconfig @@ -59,6 +59,7 @@ config DMA7_UARTTX default 10 config TIMER0 int "TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config TIMER1 int "TIMER1" diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 0c66bf44cfab..895f213ea454 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .ctl_reg = 0x1000, @@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */ diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index e8974878d8c2..a727e538fa28 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif /* SPI ADC chip */ -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, @@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 08cd0969de47..842f1c9c2393 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index db96f33f72e2..e19c565ade16 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = 39, }, #endif -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 1cf893e2e55b..31145b509e20 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ @@ -34,12 +34,12 @@ # define ANOMALY_BF533 0 #endif -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) /* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ -#define ANOMALY_05000105 (1) +#define ANOMALY_05000105 (__SILICON_REVISION__ > 2) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ @@ -48,7 +48,7 @@ #define ANOMALY_05000158 (__SILICON_REVISION__ < 5) /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) -/* Turning Serial Ports on with External Frame Syncs */ +/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (__SILICON_REVISION__ < 5) @@ -67,9 +67,9 @@ /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 4) /* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ -#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4) /* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ -#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) +#define ANOMALY_05000201 (__SILICON_REVISION__ == 3) /* Possible Infinite Stall with Specific Dual-DAG Situation */ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) /* Specific Sequence That Can Cause DMA Error or DMA Stopping */ @@ -104,7 +104,7 @@ #define ANOMALY_05000242 (__SILICON_REVISION__ < 5) /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Data CPLBs Should Prevent Spurious Hardware Errors */ #define ANOMALY_05000246 (__SILICON_REVISION__ < 5) @@ -137,7 +137,7 @@ /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 5) /* Spontaneous Reset of Internal Voltage Regulator */ -#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) +#define ANOMALY_05000271 (__SILICON_REVISION__ == 3) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) /* Writes to Synchronous SDRAM Memory May Be Lost */ @@ -165,14 +165,14 @@ /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ -#define ANOMALY_05000307 (1) +#define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ #define ANOMALY_05000311 (__SILICON_REVISION__ < 6) /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 6) -/* PPI Is Level-Sensitive on First Transfer */ +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 6) /* Killed System MMR Write Completes Erroneously On Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 6) @@ -200,17 +200,63 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. */ +/* Internal voltage regulator can't be modified via register writes */ +#define ANOMALY_05000066 (__SILICON_REVISION__ < 2) /* Watchpoints (Hardware Breakpoints) are not supported */ #define ANOMALY_05000067 (__SILICON_REVISION__ < 3) +/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */ +#define ANOMALY_05000070 (__SILICON_REVISION__ < 2) +/* Writing FIO_DIR can corrupt a programmable flag's data */ +#define ANOMALY_05000079 (__SILICON_REVISION__ < 2) +/* Timer Auto-Baud Mode requires the UART clock to be enabled */ +#define ANOMALY_05000086 (__SILICON_REVISION__ < 2) +/* Internal Clocking Modes on SPORT0 not supported */ +#define ANOMALY_05000088 (__SILICON_REVISION__ < 2) +/* Internal voltage regulator does not wake up from an RTC wakeup */ +#define ANOMALY_05000092 (__SILICON_REVISION__ < 2) +/* The IFLUSH instruction must be preceded by a CSYNC instruction */ +#define ANOMALY_05000093 (__SILICON_REVISION__ < 2) +/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */ +#define ANOMALY_05000095 (__SILICON_REVISION__ < 2) +/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */ +#define ANOMALY_05000096 (__SILICON_REVISION__ < 2) +/* Performance Monitor 0 and 1 are swapped when monitoring memory events */ +#define ANOMALY_05000097 (__SILICON_REVISION__ < 2) +/* 32-bit SPORT DMA will be word reversed */ +#define ANOMALY_05000098 (__SILICON_REVISION__ < 2) +/* Incorrect status in the UART_IIR register */ +#define ANOMALY_05000100 (__SILICON_REVISION__ < 2) +/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */ +#define ANOMALY_05000101 (__SILICON_REVISION__ < 2) +/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ +#define ANOMALY_05000102 (__SILICON_REVISION__ < 2) +/* Incorrect value written to the cycle counters */ +#define ANOMALY_05000103 (__SILICON_REVISION__ < 2) +/* Stores to L1 Data memory incorrect when a specific sequence is followed */ +#define ANOMALY_05000104 (__SILICON_REVISION__ < 2) +/* Programmable Flag (PF3) functionality not supported in all PPI modes */ +#define ANOMALY_05000106 (__SILICON_REVISION__ < 2) +/* Data store can be lost when targeting a cache line fill */ +#define ANOMALY_05000107 (__SILICON_REVISION__ < 2) /* Reserved bits in SYSCFG register not set at power on */ #define ANOMALY_05000109 (__SILICON_REVISION__ < 3) +/* Infinite Core Stall */ +#define ANOMALY_05000114 (__SILICON_REVISION__ < 2) +/* PPI_FSx may glitch when generated by the on chip Timers */ +#define ANOMALY_05000115 (__SILICON_REVISION__ < 2) /* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */ +#define ANOMALY_05000117 (__SILICON_REVISION__ < 2) +/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */ +#define ANOMALY_05000118 (__SILICON_REVISION__ < 2) /* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ #define ANOMALY_05000123 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ @@ -222,7 +268,9 @@ /* DMEM_CONTROL is not set on Reset */ #define ANOMALY_05000137 (__SILICON_REVISION__ < 3) /* SPI boot will not complete if there is a zero fill block in the loader file */ -#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) +#define ANOMALY_05000138 (__SILICON_REVISION__ == 2) +/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */ +#define ANOMALY_05000139 (__SILICON_REVISION__ < 2) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) /* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ @@ -237,17 +285,17 @@ #define ANOMALY_05000145 (__SILICON_REVISION__ < 3) /* MDMA may lose the first few words of a descriptor chain */ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) -/* The source MDMA descriptor may stop with a DMA Error */ +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) /* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ #define ANOMALY_05000148 (__SILICON_REVISION__ < 3) /* Frame Delay in SPORT Multichannel Mode */ #define ANOMALY_05000153 (__SILICON_REVISION__ < 3) -/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ #define ANOMALY_05000155 (__SILICON_REVISION__ < 3) -/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) /* SPORT transmit data is not gated by external frame sync in certain conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) @@ -275,15 +323,27 @@ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000120 (0) +#define ANOMALY_05000149 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000287 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000362 (1) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index bbc08fd4f122..d81224f9d723 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -66,6 +66,7 @@ config IRQ_MAC_TX default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 41c75b9bfac0..4fee19673127 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 4e1de1e53f89..26707ce39f29 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 0572926da23f..dfb5036f8a6b 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif +#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#include <linux/input.h> +#include <linux/spi/adxl34x.h> +static const struct adxl34x_platform_data adxl34x_info = { + .x_axis_offset = 0, + .y_axis_offset = 0, + .z_axis_offset = 0, + .tap_threshold = 0x31, + .tap_duration = 0x10, + .tap_latency = 0x60, + .tap_window = 0xF0, + .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, + .act_axis_control = 0xFF, + .activity_threshold = 5, + .inactivity_threshold = 3, + .inactivity_time = 4, + .free_fall_threshold = 0x7, + .free_fall_time = 0x20, + .data_rate = 0x8, + .data_range = ADXL_FULL_RES, + + .ev_type = EV_ABS, + .ev_code_x = ABS_X, /* EV_REL */ + .ev_code_y = ABS_Y, /* EV_REL */ + .ev_code_z = ABS_Z, /* EV_REL */ + + .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + +/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ +/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ + .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, + .fifo_mode = ADXL_FIFO_STREAM, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) static struct bfin5xx_spi_chip spi_ad7879_chip_info = { .enable_dma = 0, @@ -695,8 +732,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -1280,7 +1317,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = IRQ_PF5, }, #endif -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, @@ -1312,6 +1349,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&adp5520_pdev_data, }, #endif +#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) + { + I2C_BOARD_INFO("adxl34x", 0x53), + .irq = IRQ_PG3, + .platform_data = (void *)&adxl34x_info, + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -1358,16 +1402,18 @@ static struct resource bfin_pata_resources[] = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 0, }; - +/* CompactFlash Storage Card Memory Mapped Adressing + * /REG = A11 = 1 + */ static struct resource bfin_pata_resources[] = { { - .start = 0x20211820, - .end = 0x2021183F, + .start = 0x20211800, + .end = 0x20211807, .flags = IORESOURCE_MEM, }, { - .start = 0x2021181C, - .end = 0x2021181F, + .start = 0x2021180E, /* Device Ctl */ + .end = 0x2021180E, .flags = IORESOURCE_MEM, }, }; @@ -1527,7 +1573,8 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \ + && defined(PATA_INT) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 53ad10f3cd76..280574591201 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 1bfd80c26c90..fc9663425465 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ @@ -36,77 +36,75 @@ /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) -/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */ +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) -/* Rx.H cannot be used to access 16-bit System MMR registers */ +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) -/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ -#define ANOMALY_05000167 (1) -/* PPI_DELAY not functional in PPI modes with 0 frame syncs */ +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) /* Instruction Cache Is Not Functional */ #define ANOMALY_05000237 (__SILICON_REVISION__ < 2) -/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) -/* Spurious Hardware Error from an access in the shadow of a conditional branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* CLKIN Buffer Output Enable Reset Behavior Is Changed */ #define ANOMALY_05000247 (1) -/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */ +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) /* EMAC Tx DMA error after an early frame abort */ #define ANOMALY_05000252 (__SILICON_REVISION__ < 3) -/* Maximum external clock speed for Timers */ +/* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (__SILICON_REVISION__ < 3) -/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */ +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ #define ANOMALY_05000254 (__SILICON_REVISION__ > 2) -/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */ +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ #define ANOMALY_05000255 (__SILICON_REVISION__ < 3) /* EMAC MDIO input latched on wrong MDC edge */ #define ANOMALY_05000256 (__SILICON_REVISION__ < 3) -/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */ +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ #define ANOMALY_05000257 (__SILICON_REVISION__ < 3) -/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */ +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ #define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2) -/* ICPLB_STATUS MMR register may be corrupted */ +/* ICPLB_STATUS MMR Register May Be Corrupted */ #define ANOMALY_05000260 (__SILICON_REVISION__ == 2) -/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ #define ANOMALY_05000261 (__SILICON_REVISION__ < 3) -/* Stores to data cache may be lost */ +/* Stores To Data Cache May Be Lost */ #define ANOMALY_05000262 (__SILICON_REVISION__ < 3) -/* Hardware loop corrupted when taking an ICPLB exception */ +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ #define ANOMALY_05000263 (__SILICON_REVISION__ == 2) -/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */ +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ #define ANOMALY_05000264 (__SILICON_REVISION__ < 3) -/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */ +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ #define ANOMALY_05000268 (__SILICON_REVISION__ < 3) -/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */ +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 3) -/* Certain data cache write through modes fail for VDDint <=0.9V */ +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* Writes to Synchronous SDRAM memory may be lost */ +/* Writes to Synchronous SDRAM Memory May Be Lost */ #define ANOMALY_05000273 (__SILICON_REVISION__ < 3) -/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) -/* Disabling Peripherals with DMA running may cause DMA system instability */ +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) /* SPI Master boot mode does not work well with Atmel Data flash devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception when ISR context is not restored */ +/* False Hardware Error Exception When ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) -/* Memory DMA corruption with 32-bit data and traffic control */ +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 3) /* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ #define ANOMALY_05000285 (__SILICON_REVISION__ < 3) -/* SPORTs may receive bad data if FIFOs fill up */ +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 3) -/* Memory to memory DMA source/destination descriptors must be in same memory space */ +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3) @@ -116,11 +114,11 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) /* Writing UART_THR while UART clock is disabled sends erroneous start bit */ #define ANOMALY_05000309 (__SILICON_REVISION__ < 3) -/* False hardware errors caused by fetches at the boundary of reserved memory */ +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */ +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) -/* PPI is level sensitive on first transfer */ +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) /* Killed System MMR Write Completes Erroneously On Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 3) @@ -156,24 +154,46 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000242 (0) +#define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000287 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig index f068c3523cdc..2d280f504ab0 100644 --- a/arch/blackfin/mach-bf538/Kconfig +++ b/arch/blackfin/mach-bf538/Kconfig @@ -57,6 +57,7 @@ config IRQ_UART0_TX default 10 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 3a5699827363..175ca9ef7232 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List * - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ @@ -14,17 +14,29 @@ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ +/* We do not support old silicon - sorry */ #if __SILICON_REVISION__ < 4 -# error will not work on BF538 silicon version 0.0, 0.1, 0.2, or 0.3 +# error will not work on BF538/BF539 silicon version 0.0, 0.1, 0.2, or 0.3 #endif -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#if defined(__ADSPBF538__) +# define ANOMALY_BF538 1 +#else +# define ANOMALY_BF538 0 +#endif +#if defined(__ADSPBF539__) +# define ANOMALY_BF539 1 +#else +# define ANOMALY_BF539 0 +#endif + +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (1) @@ -40,13 +52,13 @@ #define ANOMALY_05000229 (1) /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ #define ANOMALY_05000233 (1) -/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (1) -/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ #define ANOMALY_05000261 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 4) @@ -58,11 +70,11 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 4) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 4) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error Exception When ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 4) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 4) -/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 4) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 4) @@ -80,14 +92,14 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 4) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 5) -/* PPI Is Level-Sensitive on First Transfer */ +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 4) -/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 4) /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ -#define ANOMALY_05000318 (__SILICON_REVISION__ < 4) +#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (__SILICON_REVISION__ < 5) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -114,23 +126,45 @@ #define ANOMALY_05000436 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000242 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000254 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000287 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h index ea25371a922b..6f628353dde3 100644 --- a/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -68,25 +68,6 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ - -#define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA0_D0_IRQ_STATUS -#define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA0_D0_START_ADDR -#define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA0_S0_START_ADDR -#define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA0_D0_X_COUNT -#define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA0_S0_X_COUNT -#define bfin_write_MDMA_D0_Y_COUNT bfin_write_MDMA0_D0_Y_COUNT -#define bfin_write_MDMA_S0_Y_COUNT bfin_write_MDMA0_S0_Y_COUNT -#define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA0_D0_X_MODIFY -#define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA0_S0_X_MODIFY -#define bfin_write_MDMA_D0_Y_MODIFY bfin_write_MDMA0_D0_Y_MODIFY -#define bfin_write_MDMA_S0_Y_MODIFY bfin_write_MDMA0_S0_Y_MODIFY -#define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA0_S0_CONFIG -#define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA0_D0_CONFIG -#define bfin_read_MDMA_S0_CONFIG bfin_read_MDMA0_S0_CONFIG -#define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA0_D0_IRQ_STATUS -#define bfin_write_MDMA_S0_IRQ_STATUS bfin_write_MDMA0_S0_IRQ_STATUS - - /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h index 241725bc6988..99ca3f4305e2 100644 --- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h @@ -67,14 +67,14 @@ #define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) #define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) #define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) -#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0)) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0)) #define bfin_write_SIC_ISR(x, val) bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val) #define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) #define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) #define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) #define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) -#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0)) -#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val) +#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0)) +#define bfin_write_SIC_IWR(x, val) bfin_write32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val) #define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) #define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) #define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) @@ -1247,6 +1247,65 @@ #define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT, val) #define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT) #define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT, val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read_MDMA0_S0_CONFIG() +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA0_S0_CONFIG(val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read_MDMA0_S0_IRQ_STATUS() +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA0_S0_IRQ_STATUS(val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read_MDMA0_S0_X_MODIFY() +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA0_S0_X_MODIFY(val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read_MDMA0_S0_Y_MODIFY() +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA0_S0_Y_MODIFY(val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read_MDMA0_S0_X_COUNT() +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA0_S0_X_COUNT(val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read_MDMA0_S0_Y_COUNT() +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA0_S0_Y_COUNT(val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read_MDMA0_S0_START_ADDR() +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA0_S0_START_ADDR(val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read_MDMA0_D0_CONFIG() +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA0_D0_CONFIG(val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read_MDMA0_D0_IRQ_STATUS() +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA0_D0_IRQ_STATUS(val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read_MDMA0_D0_X_MODIFY() +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA0_D0_X_MODIFY(val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read_MDMA0_D0_Y_MODIFY() +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA0_D0_Y_MODIFY(val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read_MDMA0_D0_X_COUNT() +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA0_D0_X_COUNT(val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read_MDMA0_D0_Y_COUNT() +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA0_D0_Y_COUNT(val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA0_D0_START_ADDR() +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA0_D0_START_ADDR(val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read_MDMA0_S1_CONFIG() +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA0_S1_CONFIG(val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read_MDMA0_S1_IRQ_STATUS() +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA0_S1_IRQ_STATUS(val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read_MDMA0_S1_X_MODIFY() +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA0_S1_X_MODIFY(val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read_MDMA0_S1_Y_MODIFY() +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA0_S1_Y_MODIFY(val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read_MDMA0_S1_X_COUNT() +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA0_S1_X_COUNT(val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read_MDMA0_S1_Y_COUNT() +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA0_S1_Y_COUNT(val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read_MDMA0_S1_START_ADDR() +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA0_S1_START_ADDR(val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read_MDMA0_D1_CONFIG() +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA0_D1_CONFIG(val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read_MDMA0_D1_IRQ_STATUS() +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA0_D1_IRQ_STATUS(val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read_MDMA0_D1_X_MODIFY() +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA0_D1_X_MODIFY(val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read_MDMA0_D1_Y_MODIFY() +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA0_D1_Y_MODIFY(val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read_MDMA0_D1_X_COUNT() +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA0_D1_X_COUNT(val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read_MDMA0_D1_Y_COUNT() +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA0_D1_Y_COUNT(val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read_MDMA0_D1_START_ADDR() +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA0_D1_START_ADDR(val) + #define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) #define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) #define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index 6adbfcc65a35..bdc330cd0e1c 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -412,6 +412,62 @@ #define MDMA0_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA0 Stream 1 Source Current X Count Register */ #define MDMA0_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA0 Stream 1 Source Current Y Count Register */ +#define MDMA_D0_NEXT_DESC_PTR MDMA0_D0_NEXT_DESC_PTR +#define MDMA_D0_START_ADDR MDMA0_D0_START_ADDR +#define MDMA_D0_CONFIG MDMA0_D0_CONFIG +#define MDMA_D0_X_COUNT MDMA0_D0_X_COUNT +#define MDMA_D0_X_MODIFY MDMA0_D0_X_MODIFY +#define MDMA_D0_Y_COUNT MDMA0_D0_Y_COUNT +#define MDMA_D0_Y_MODIFY MDMA0_D0_Y_MODIFY +#define MDMA_D0_CURR_DESC_PTR MDMA0_D0_CURR_DESC_PTR +#define MDMA_D0_CURR_ADDR MDMA0_D0_CURR_ADDR +#define MDMA_D0_IRQ_STATUS MDMA0_D0_IRQ_STATUS +#define MDMA_D0_PERIPHERAL_MAP MDMA0_D0_PERIPHERAL_MAP +#define MDMA_D0_CURR_X_COUNT MDMA0_D0_CURR_X_COUNT +#define MDMA_D0_CURR_Y_COUNT MDMA0_D0_CURR_Y_COUNT + +#define MDMA_S0_NEXT_DESC_PTR MDMA0_S0_NEXT_DESC_PTR +#define MDMA_S0_START_ADDR MDMA0_S0_START_ADDR +#define MDMA_S0_CONFIG MDMA0_S0_CONFIG +#define MDMA_S0_X_COUNT MDMA0_S0_X_COUNT +#define MDMA_S0_X_MODIFY MDMA0_S0_X_MODIFY +#define MDMA_S0_Y_COUNT MDMA0_S0_Y_COUNT +#define MDMA_S0_Y_MODIFY MDMA0_S0_Y_MODIFY +#define MDMA_S0_CURR_DESC_PTR MDMA0_S0_CURR_DESC_PTR +#define MDMA_S0_CURR_ADDR MDMA0_S0_CURR_ADDR +#define MDMA_S0_IRQ_STATUS MDMA0_S0_IRQ_STATUS +#define MDMA_S0_PERIPHERAL_MAP MDMA0_S0_PERIPHERAL_MAP +#define MDMA_S0_CURR_X_COUNT MDMA0_S0_CURR_X_COUNT +#define MDMA_S0_CURR_Y_COUNT MDMA0_S0_CURR_Y_COUNT + +#define MDMA_D1_NEXT_DESC_PTR MDMA0_D1_NEXT_DESC_PTR +#define MDMA_D1_START_ADDR MDMA0_D1_START_ADDR +#define MDMA_D1_CONFIG MDMA0_D1_CONFIG +#define MDMA_D1_X_COUNT MDMA0_D1_X_COUNT +#define MDMA_D1_X_MODIFY MDMA0_D1_X_MODIFY +#define MDMA_D1_Y_COUNT MDMA0_D1_Y_COUNT +#define MDMA_D1_Y_MODIFY MDMA0_D1_Y_MODIFY +#define MDMA_D1_CURR_DESC_PTR MDMA0_D1_CURR_DESC_PTR +#define MDMA_D1_CURR_ADDR MDMA0_D1_CURR_ADDR +#define MDMA_D1_IRQ_STATUS MDMA0_D1_IRQ_STATUS +#define MDMA_D1_PERIPHERAL_MAP MDMA0_D1_PERIPHERAL_MAP +#define MDMA_D1_CURR_X_COUNT MDMA0_D1_CURR_X_COUNT +#define MDMA_D1_CURR_Y_COUNT MDMA0_D1_CURR_Y_COUNT + +#define MDMA_S1_NEXT_DESC_PTR MDMA0_S1_NEXT_DESC_PTR +#define MDMA_S1_START_ADDR MDMA0_S1_START_ADDR +#define MDMA_S1_CONFIG MDMA0_S1_CONFIG +#define MDMA_S1_X_COUNT MDMA0_S1_X_COUNT +#define MDMA_S1_X_MODIFY MDMA0_S1_X_MODIFY +#define MDMA_S1_Y_COUNT MDMA0_S1_Y_COUNT +#define MDMA_S1_Y_MODIFY MDMA0_S1_Y_MODIFY +#define MDMA_S1_CURR_DESC_PTR MDMA0_S1_CURR_DESC_PTR +#define MDMA_S1_CURR_ADDR MDMA0_S1_CURR_ADDR +#define MDMA_S1_IRQ_STATUS MDMA0_S1_IRQ_STATUS +#define MDMA_S1_PERIPHERAL_MAP MDMA0_S1_PERIPHERAL_MAP +#define MDMA_S1_CURR_X_COUNT MDMA0_S1_CURR_X_COUNT +#define MDMA_S1_CURR_Y_COUNT MDMA0_S1_CURR_Y_COUNT + /* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index dcf657159051..a09623dfd550 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -11,6 +11,13 @@ config DEB_DMA_URGENT help Treat any DEB1, DEB2 and DEB3 request as Urgent +config BF548_ATAPI_ALTERNATIVE_PORT + bool "BF548 ATAPI alternative port via GPIO" + help + BF548 ATAPI data and address PINs can be routed through + async address or GPIO port F and G. Select y to route it + to GPIO. + comment "Interrupt Priority Assignment" menu "Priority" @@ -250,6 +257,7 @@ config IRQ_OTPSEC default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 096e661700a7..add5a17452ce 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -208,6 +208,43 @@ static struct platform_device bfin_rotary_device = { }; #endif +#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#include <linux/input.h> +#include <linux/spi/adxl34x.h> +static const struct adxl34x_platform_data adxl34x_info = { + .x_axis_offset = 0, + .y_axis_offset = 0, + .z_axis_offset = 0, + .tap_threshold = 0x31, + .tap_duration = 0x10, + .tap_latency = 0x60, + .tap_window = 0xF0, + .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, + .act_axis_control = 0xFF, + .activity_threshold = 5, + .inactivity_threshold = 3, + .inactivity_time = 4, + .free_fall_threshold = 0x7, + .free_fall_time = 0x20, + .data_rate = 0x8, + .data_range = ADXL_FULL_RES, + + .ev_type = EV_ABS, + .ev_code_x = ABS_X, /* EV_REL */ + .ev_code_y = ABS_Y, /* EV_REL */ + .ev_code_z = ABS_Z, /* EV_REL */ + + .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + +/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ +/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ + .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, + .fifo_mode = ADXL_FIFO_STREAM, +}; +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", @@ -628,6 +665,14 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -653,15 +698,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -{ - .modalias = "ad7877", - .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, -}, + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, + }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { @@ -672,8 +717,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &spidev_chip_info, }, #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PC5, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data = &spi_adxl34x_chip_info, + .mode = SPI_MODE_3, + }, +#endif }; - #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { @@ -786,7 +842,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, @@ -797,6 +853,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { .irq = 212, }, #endif +#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) + { + I2C_BOARD_INFO("adxl34x", 0x53), + .irq = IRQ_PC5, + .platform_data = (void *)&adxl34x_info, + }, +#endif }; #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 882e40ccf0d1..c510ae688e28 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -6,26 +6,31 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +/* We do not support 0.0 or 0.1 silicon - sorry */ +#if __SILICON_REVISION__ < 2 +# error will not work on BF548 silicon version 0.0, or 0.1 +#endif + +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception when ISR context is not restored */ +/* False Hardware Error Exception When ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 1) @@ -59,7 +64,7 @@ #define ANOMALY_05000340 (__SILICON_REVISION__ < 1) /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ #define ANOMALY_05000344 (__SILICON_REVISION__ < 1) -/* USB Calibration Value Is Not Intialized */ +/* USB Calibration Value Is Not Initialized */ #define ANOMALY_05000346 (__SILICON_REVISION__ < 1) /* USB Calibration Value to use */ #define ANOMALY_05000346_value 0x5411 @@ -147,11 +152,11 @@ #define ANOMALY_05000416 (1) /* Multichannel SPORT Channel Misalignment Under Specific Configuration */ #define ANOMALY_05000425 (1) -/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */ +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */ #define ANOMALY_05000427 (__SILICON_REVISION__ < 2) -/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */ +/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) @@ -170,26 +175,49 @@ /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ #define ANOMALY_05000449 (__SILICON_REVISION__ == 1) /* USB DMA Mode 1 Short Packet Data Corruption */ -#define ANOMALY_05000450 (1 +#define ANOMALY_05000450 (1) +/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ +#define ANOMALY_05000456 (__SILICON_REVISION__ < 3) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000254 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index ffb1d0a44b4d..ce372ba0f046 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -167,22 +167,42 @@ #define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) #define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) #define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) -#define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) -#define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) -#define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) -#define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) -#define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) -#define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) -#define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) -#define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) -#define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) -#define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) -#define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) -#define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) -#define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) -#define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) -#define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) -#define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT +# define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +# define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +# define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +# define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +# define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +# define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +# define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +# define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +# define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +# define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +# define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +# define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +# define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +# define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +# define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +# define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#else +# define P_ATAPI_D0A (P_DONTCARE) +# define P_ATAPI_D1A (P_DONTCARE) +# define P_ATAPI_D2A (P_DONTCARE) +# define P_ATAPI_D3A (P_DONTCARE) +# define P_ATAPI_D4A (P_DONTCARE) +# define P_ATAPI_D5A (P_DONTCARE) +# define P_ATAPI_D6A (P_DONTCARE) +# define P_ATAPI_D7A (P_DONTCARE) +# define P_ATAPI_D8A (P_DONTCARE) +# define P_ATAPI_D9A (P_DONTCARE) +# define P_ATAPI_D10A (P_DONTCARE) +# define P_ATAPI_D11A (P_DONTCARE) +# define P_ATAPI_D12A (P_DONTCARE) +# define P_ATAPI_D13A (P_DONTCARE) +# define P_ATAPI_D14A (P_DONTCARE) +# define P_ATAPI_D15A (P_DONTCARE) +#endif #define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) @@ -200,9 +220,15 @@ #define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) #define P_CAN1_TX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) #define P_CAN1_RX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) -#define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) -#define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) -#define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT +# define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) +# define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +# define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#else +# define P_ATAPI_A0A (P_DONTCARE) +# define P_ATAPI_A1A (P_DONTCARE) +# define P_ATAPI_A2A (P_DONTCARE) +#endif #define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) #define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) #define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig index 638ec38ca470..cb9743641511 100644 --- a/arch/blackfin/mach-bf561/Kconfig +++ b/arch/blackfin/mach-bf561/Kconfig @@ -9,22 +9,9 @@ if (!SMP) comment "Core B Support" config BF561_COREB - bool "Enable Core B support" + bool "Enable Core B loader" default y -config BF561_COREB_RESET - bool "Enable Core B reset support" - default n - help - This requires code in the application that is loaded - into Core B. In order to reset, the application needs - to install an interrupt handler for Supplemental - Interrupt 0, that sets RETI to 0xff600000 and writes - bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. - This causes Core B to stall when Supplemental Interrupt - 0 is set, and will reset PC to 0xff600000 when - COREB_SRAM_INIT is cleared. - endif comment "Interrupt Priority Assignment" @@ -138,6 +125,7 @@ config IRQ_DMA2_11 default 9 config IRQ_TIMER0 int "TIMER 0 Interrupt" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "TIMER 1 Interrupt" diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index f623c6b0719f..0dd9685e5d53 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ @@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 8598098c0840..93635a766f9c 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -1,406 +1,74 @@ -/* - * File: arch/blackfin/mach-bf561/coreb.c - * Based on: - * Author: +/* Load firmware into Core B on a BF561 * - * Created: - * Description: Handle CoreB on a BF561 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* The Core B reset func requires code in the application that is loaded into + * Core B. In order to reset, the application needs to install an interrupt + * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and + * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. This causes Core + * B to stall when Supplemental Interrupt 0 is set, and will reset PC to + * 0xff600000 when COREB_SRAM_INIT is cleared. */ -#include <linux/mm.h> -#include <linux/miscdevice.h> #include <linux/device.h> -#include <linux/ioport.h> -#include <linux/module.h> -#include <linux/uaccess.h> #include <linux/fs.h> -#include <asm/dma.h> -#include <asm/cacheflush.h> - -#define MODULE_VER "v0.1" - -static spinlock_t coreb_lock; -static wait_queue_head_t coreb_dma_wait; - -#define COREB_IS_OPEN 0x00000001 -#define COREB_IS_RUNNING 0x00000010 +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> -#define CMD_COREB_INDEX 1 #define CMD_COREB_START 2 #define CMD_COREB_STOP 3 #define CMD_COREB_RESET 4 -#define COREB_MINOR 229 - -static unsigned long coreb_status = 0; -static unsigned long coreb_base = 0xff600000; -static unsigned long coreb_size = 0x4000; -int coreb_dma_done; - -static loff_t coreb_lseek(struct file *file, loff_t offset, int origin); -static ssize_t coreb_read(struct file *file, char *buf, size_t count, - loff_t * ppos); -static ssize_t coreb_write(struct file *file, const char *buf, size_t count, - loff_t * ppos); -static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg); -static int coreb_open(struct inode *inode, struct file *file); -static int coreb_release(struct inode *inode, struct file *file); - -static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id) -{ - clear_dma_irqstat(CH_MEM_STREAM2_DEST); - coreb_dma_done = 1; - wake_up_interruptible(&coreb_dma_wait); - return IRQ_HANDLED; -} - -static ssize_t coreb_write(struct file *file, const char *buf, size_t count, - loff_t * ppos) -{ - unsigned long p = *ppos; - ssize_t wrote = 0; - - if (p + count > coreb_size) - return -EFAULT; - - while (count > 0) { - int len = count; - - if (len > PAGE_SIZE) - len = PAGE_SIZE; - - coreb_dma_done = 0; - - flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); - /* Source Channel */ - set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf); - set_dma_x_count(CH_MEM_STREAM2_SRC, len); - set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, 0); - /* Destination Channel */ - set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p); - set_dma_x_count(CH_MEM_STREAM2_DEST, len); - set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN); - - enable_dma(CH_MEM_STREAM2_SRC); - enable_dma(CH_MEM_STREAM2_DEST); - - wait_event_interruptible(coreb_dma_wait, coreb_dma_done); - - disable_dma(CH_MEM_STREAM2_SRC); - disable_dma(CH_MEM_STREAM2_DEST); - - count -= len; - wrote += len; - buf += len; - p += len; - } - *ppos = p; - return wrote; -} - -static ssize_t coreb_read(struct file *file, char *buf, size_t count, - loff_t * ppos) -{ - unsigned long p = *ppos; - ssize_t read = 0; - - if ((p + count) > coreb_size) - return -EFAULT; - - while (count > 0) { - int len = count; - - if (len > PAGE_SIZE) - len = PAGE_SIZE; - - coreb_dma_done = 0; - - invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); - /* Source Channel */ - set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p); - set_dma_x_count(CH_MEM_STREAM2_SRC, len); - set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, 0); - /* Destination Channel */ - set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf); - set_dma_x_count(CH_MEM_STREAM2_DEST, len); - set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN); - - enable_dma(CH_MEM_STREAM2_SRC); - enable_dma(CH_MEM_STREAM2_DEST); - - wait_event_interruptible(coreb_dma_wait, coreb_dma_done); - - disable_dma(CH_MEM_STREAM2_SRC); - disable_dma(CH_MEM_STREAM2_DEST); - - count -= len; - read += len; - buf += len; - p += len; - } - - return read; -} - -static loff_t coreb_lseek(struct file *file, loff_t offset, int origin) +static int +coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - loff_t ret; - - mutex_lock(&file->f_dentry->d_inode->i_mutex); - - switch (origin) { - case 0 /* SEEK_SET */ : - if (offset < coreb_size) { - file->f_pos = offset; - ret = file->f_pos; - } else - ret = -EINVAL; - break; - case 1 /* SEEK_CUR */ : - if ((offset + file->f_pos) < coreb_size) { - file->f_pos += offset; - ret = file->f_pos; - } else - ret = -EINVAL; - default: - ret = -EINVAL; - } - mutex_unlock(&file->f_dentry->d_inode->i_mutex); - return ret; -} - -/* No BKL needed here */ -static int coreb_open(struct inode *inode, struct file *file) -{ - spin_lock_irq(&coreb_lock); - - if (coreb_status & COREB_IS_OPEN) - goto out_busy; - - coreb_status |= COREB_IS_OPEN; - - spin_unlock_irq(&coreb_lock); - return 0; - - out_busy: - spin_unlock_irq(&coreb_lock); - return -EBUSY; -} - -static int coreb_release(struct inode *inode, struct file *file) -{ - spin_lock_irq(&coreb_lock); - coreb_status &= ~COREB_IS_OPEN; - spin_unlock_irq(&coreb_lock); - return 0; -} - -static int coreb_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int retval = 0; - int coreb_index = 0; + int ret = 0; switch (cmd) { - case CMD_COREB_INDEX: - if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) { - retval = -EFAULT; - break; - } - - spin_lock_irq(&coreb_lock); - switch (coreb_index) { - case 0: - coreb_base = 0xff600000; - coreb_size = 0x4000; - break; - case 1: - coreb_base = 0xff610000; - coreb_size = 0x4000; - break; - case 2: - coreb_base = 0xff500000; - coreb_size = 0x8000; - break; - case 3: - coreb_base = 0xff400000; - coreb_size = 0x8000; - break; - default: - retval = -EINVAL; - break; - } - spin_unlock_irq(&coreb_lock); - - mutex_lock(&file->f_dentry->d_inode->i_mutex); - file->f_pos = 0; - mutex_unlock(&file->f_dentry->d_inode->i_mutex); - break; case CMD_COREB_START: - spin_lock_irq(&coreb_lock); - if (coreb_status & COREB_IS_RUNNING) { - retval = -EBUSY; - break; - } - printk(KERN_INFO "Starting Core B\n"); - coreb_status |= COREB_IS_RUNNING; bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020); - SSYNC(); - spin_unlock_irq(&coreb_lock); break; -#if defined(CONFIG_BF561_COREB_RESET) case CMD_COREB_STOP: - spin_lock_irq(&coreb_lock); - printk(KERN_INFO "Stopping Core B\n"); bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); - coreb_status &= ~COREB_IS_RUNNING; - spin_unlock_irq(&coreb_lock); break; case CMD_COREB_RESET: - printk(KERN_INFO "Resetting Core B\n"); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); break; -#endif + default: + ret = -EINVAL; + break; } - return retval; + CSYNC(); + + return ret; } static struct file_operations coreb_fops = { - .owner = THIS_MODULE, - .llseek = coreb_lseek, - .read = coreb_read, - .write = coreb_write, - .ioctl = coreb_ioctl, - .open = coreb_open, - .release = coreb_release + .owner = THIS_MODULE, + .ioctl = coreb_ioctl, }; static struct miscdevice coreb_dev = { - COREB_MINOR, - "coreb", - &coreb_fops + .minor = MISC_DYNAMIC_MINOR, + .name = "coreb", + .fops = &coreb_fops, }; -static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf) +static int __init bf561_coreb_init(void) { - return sprintf(buf, - "Base Address:\t0x%08lx\n" - "Core B is %s\n" - "SICA_SYSCR:\t%04x\n" - "SICB_SYSCR:\t%04x\n" - "\n" - "IRQ Status:\tCore A\t\tCore B\n" - "ISR0:\t\t%08x\t\t%08x\n" - "ISR1:\t\t%08x\t\t%08x\n" - "IMASK0:\t\t%08x\t\t%08x\n" - "IMASK1:\t\t%08x\t\t%08x\n", - coreb_base, - coreb_status & COREB_IS_RUNNING ? "running" : "stalled", - bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(), - bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(), - bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(), - bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(), - bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1()); -} - -static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL); - -int __init bf561_coreb_init(void) -{ - init_waitqueue_head(&coreb_dma_wait); - - spin_lock_init(&coreb_lock); - /* Request the core memory regions for Core B */ - if (request_mem_region(0xff600000, 0x4000, - "Core B - Instruction SRAM") == NULL) - goto exit; - - if (request_mem_region(0xFF610000, 0x4000, - "Core B - Instruction SRAM") == NULL) - goto release_instruction_a_sram; - - if (request_mem_region(0xFF500000, 0x8000, - "Core B - Data Bank B SRAM") == NULL) - goto release_instruction_b_sram; - - if (request_mem_region(0xff400000, 0x8000, - "Core B - Data Bank A SRAM") == NULL) - goto release_data_b_sram; - - if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0) - goto release_data_a_sram; - - if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0) - goto release_dma_dest; - - set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL); - - misc_register(&coreb_dev); - - if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status)) - goto release_dma_src; - - printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER); - return 0; - - release_dma_src: - free_dma(CH_MEM_STREAM2_SRC); - release_dma_dest: - free_dma(CH_MEM_STREAM2_DEST); - release_data_a_sram: - release_mem_region(0xff400000, 0x8000); - release_data_b_sram: - release_mem_region(0xff500000, 0x8000); - release_instruction_b_sram: - release_mem_region(0xff610000, 0x4000); - release_instruction_a_sram: - release_mem_region(0xff600000, 0x4000); - exit: - return -ENOMEM; + return misc_register(&coreb_dev); } +module_init(bf561_coreb_init); -void __exit bf561_coreb_exit(void) +static void __exit bf561_coreb_exit(void) { - device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status); misc_deregister(&coreb_dev); - - release_mem_region(0xff610000, 0x4000); - release_mem_region(0xff600000, 0x4000); - release_mem_region(0xff500000, 0x8000); - release_mem_region(0xff400000, 0x8000); - - free_dma(CH_MEM_STREAM2_DEST); - free_dma(CH_MEM_STREAM2_SRC); } - -module_init(bf561_coreb_init); module_exit(bf561_coreb_exit); MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>"); diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index d0b0b3506440..dccd396cd931 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -/* This file shoule be up to date with: +/* This file should be up to date with: * - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List */ @@ -18,11 +18,11 @@ # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* Testset instructions restricted to 32-bit aligned memory locations */ #define ANOMALY_05000120 (1) @@ -40,7 +40,7 @@ #define ANOMALY_05000136 (__SILICON_REVISION__ < 3) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -80,7 +80,7 @@ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) -/* Turning Serial Ports on with External Frame Syncs */ +/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) /* SDRAM auto-refresh and subsequent Power Ups */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 5) @@ -164,7 +164,7 @@ #define ANOMALY_05000242 (__SILICON_REVISION__ < 5) /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (__SILICON_REVISION__ < 5) /* TESTSET operation forces stall on the other core */ #define ANOMALY_05000248 (__SILICON_REVISION__ < 5) @@ -208,7 +208,7 @@ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ #define ANOMALY_05000276 (__SILICON_REVISION__ < 5) -/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) @@ -232,7 +232,7 @@ #define ANOMALY_05000310 (1) /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) -/* PPI Is Level-Sensitive on First Transfer */ +/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) /* Killed System MMR Write Completes Erroneously On Next System MMR Access */ #define ANOMALY_05000315 (1) @@ -276,18 +276,27 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000119 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000233 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h index 95d609f11c97..9d9858c2be68 100644 --- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -1526,6 +1526,35 @@ #define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA1_D0_START_ADDR() #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read_MDMA1_S1_CONFIG() +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA1_S1_CONFIG(val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read_MDMA1_S1_IRQ_STATUS() +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA1_S1_IRQ_STATUS(val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read_MDMA1_S1_X_MODIFY() +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA1_S1_X_MODIFY(val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read_MDMA1_S1_Y_MODIFY() +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA1_S1_Y_MODIFY(val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read_MDMA1_S1_X_COUNT() +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA1_S1_X_COUNT(val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read_MDMA1_S1_Y_COUNT() +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA1_S1_Y_COUNT(val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read_MDMA1_S1_START_ADDR() +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA1_S1_START_ADDR(val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read_MDMA1_D1_CONFIG() +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA1_D1_CONFIG(val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read_MDMA1_D1_IRQ_STATUS() +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA1_D1_IRQ_STATUS(val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read_MDMA1_D1_X_MODIFY() +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA1_D1_X_MODIFY(val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read_MDMA1_D1_Y_MODIFY() +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA1_D1_Y_MODIFY(val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read_MDMA1_D1_X_COUNT() +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA1_D1_X_COUNT(val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read_MDMA1_D1_Y_COUNT() +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA1_D1_Y_COUNT(val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read_MDMA1_D1_START_ADDR() +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA1_D1_START_ADDR(val) + /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index cf922295f4ce..5fc0f05026e0 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -796,6 +796,62 @@ #define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ #define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ +#define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR +#define MDMA_D0_START_ADDR MDMA1_D0_START_ADDR +#define MDMA_D0_CONFIG MDMA1_D0_CONFIG +#define MDMA_D0_X_COUNT MDMA1_D0_X_COUNT +#define MDMA_D0_X_MODIFY MDMA1_D0_X_MODIFY +#define MDMA_D0_Y_COUNT MDMA1_D0_Y_COUNT +#define MDMA_D0_Y_MODIFY MDMA1_D0_Y_MODIFY +#define MDMA_D0_CURR_DESC_PTR MDMA1_D0_CURR_DESC_PTR +#define MDMA_D0_CURR_ADDR MDMA1_D0_CURR_ADDR +#define MDMA_D0_IRQ_STATUS MDMA1_D0_IRQ_STATUS +#define MDMA_D0_PERIPHERAL_MAP MDMA1_D0_PERIPHERAL_MAP +#define MDMA_D0_CURR_X_COUNT MDMA1_D0_CURR_X_COUNT +#define MDMA_D0_CURR_Y_COUNT MDMA1_D0_CURR_Y_COUNT + +#define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR +#define MDMA_S0_START_ADDR MDMA1_S0_START_ADDR +#define MDMA_S0_CONFIG MDMA1_S0_CONFIG +#define MDMA_S0_X_COUNT MDMA1_S0_X_COUNT +#define MDMA_S0_X_MODIFY MDMA1_S0_X_MODIFY +#define MDMA_S0_Y_COUNT MDMA1_S0_Y_COUNT +#define MDMA_S0_Y_MODIFY MDMA1_S0_Y_MODIFY +#define MDMA_S0_CURR_DESC_PTR MDMA1_S0_CURR_DESC_PTR +#define MDMA_S0_CURR_ADDR MDMA1_S0_CURR_ADDR +#define MDMA_S0_IRQ_STATUS MDMA1_S0_IRQ_STATUS +#define MDMA_S0_PERIPHERAL_MAP MDMA1_S0_PERIPHERAL_MAP +#define MDMA_S0_CURR_X_COUNT MDMA1_S0_CURR_X_COUNT +#define MDMA_S0_CURR_Y_COUNT MDMA1_S0_CURR_Y_COUNT + +#define MDMA_D1_NEXT_DESC_PTR MDMA1_D1_NEXT_DESC_PTR +#define MDMA_D1_START_ADDR MDMA1_D1_START_ADDR +#define MDMA_D1_CONFIG MDMA1_D1_CONFIG +#define MDMA_D1_X_COUNT MDMA1_D1_X_COUNT +#define MDMA_D1_X_MODIFY MDMA1_D1_X_MODIFY +#define MDMA_D1_Y_COUNT MDMA1_D1_Y_COUNT +#define MDMA_D1_Y_MODIFY MDMA1_D1_Y_MODIFY +#define MDMA_D1_CURR_DESC_PTR MDMA1_D1_CURR_DESC_PTR +#define MDMA_D1_CURR_ADDR MDMA1_D1_CURR_ADDR +#define MDMA_D1_IRQ_STATUS MDMA1_D1_IRQ_STATUS +#define MDMA_D1_PERIPHERAL_MAP MDMA1_D1_PERIPHERAL_MAP +#define MDMA_D1_CURR_X_COUNT MDMA1_D1_CURR_X_COUNT +#define MDMA_D1_CURR_Y_COUNT MDMA1_D1_CURR_Y_COUNT + +#define MDMA_S1_NEXT_DESC_PTR MDMA1_S1_NEXT_DESC_PTR +#define MDMA_S1_START_ADDR MDMA1_S1_START_ADDR +#define MDMA_S1_CONFIG MDMA1_S1_CONFIG +#define MDMA_S1_X_COUNT MDMA1_S1_X_COUNT +#define MDMA_S1_X_MODIFY MDMA1_S1_X_MODIFY +#define MDMA_S1_Y_COUNT MDMA1_S1_Y_COUNT +#define MDMA_S1_Y_MODIFY MDMA1_S1_Y_MODIFY +#define MDMA_S1_CURR_DESC_PTR MDMA1_S1_CURR_DESC_PTR +#define MDMA_S1_CURR_ADDR MDMA1_S1_CURR_ADDR +#define MDMA_S1_IRQ_STATUS MDMA1_S1_IRQ_STATUS +#define MDMA_S1_PERIPHERAL_MAP MDMA1_S1_PERIPHERAL_MAP +#define MDMA_S1_CURR_X_COUNT MDMA1_S1_CURR_X_COUNT +#define MDMA_S1_CURR_Y_COUNT MDMA1_S1_CURR_Y_COUNT + /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ #define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */ #define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 9b27e698c0b2..8c10701c251f 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -133,9 +133,9 @@ void __init platform_request_ipi(irq_handler_t handler) int ret; ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED, - "SMP interrupt", handler); + "Supplemental Interrupt0", handler); if (ret) - panic("Cannot request supplemental interrupt 0 for IPI service\n"); + panic("Cannot request supplemental interrupt 0 for IPI service"); } void platform_send_ipi(cpumask_t callmap) diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 80d39b2f9db2..da93d9207165 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -71,3 +71,10 @@ #if ANOMALY_05000448 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. #endif + +/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */ +#if ANOMALY_05000220 && \ + ((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \ + (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB))) +# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. +#endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index aa0648c6a9fe..d9666fe6c3d6 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -15,6 +15,13 @@ .text +/* 05000443 - IFLUSH cannot be last instruction in hardware loop */ +#if ANOMALY_05000443 +# define BROK_FLUSH_INST "IFLUSH" +#else +# define BROK_FLUSH_INST "no anomaly! yeah!" +#endif + /* Since all L1 caches work the same way, we use the same method for flushing * them. Only the actual flush instruction differs. We write this in asm as * GCC can be hard to coax into writing nice hardware loops. @@ -23,7 +30,7 @@ * R0 = start address * R1 = end address */ -.macro do_flush flushins:req optflushins optnopins label +.macro do_flush flushins:req label R2 = -L1_CACHE_BYTES; @@ -44,22 +51,15 @@ \label : .endif P0 = R0; + LSETUP (1f, 2f) LC1 = P1; 1: -.ifnb \optflushins - \optflushins [P0]; -.endif -#if ANOMALY_05000443 -.ifb \optnopins -2: -.endif +.ifeqs "\flushins", BROK_FLUSH_INST \flushins [P0++]; -.ifnb \optnopins -2: \optnopins; -.endif -#else +2: nop; +.else 2: \flushins [P0++]; -#endif +.endif RTS; .endm @@ -77,25 +77,9 @@ ENTRY(_blackfin_icache_flush_range) */ P0 = R0; IFLUSH[P0]; - do_flush IFLUSH, , nop + do_flush IFLUSH ENDPROC(_blackfin_icache_flush_range) -/* Flush all cache lines assocoiated with this area of memory. */ -ENTRY(_blackfin_icache_dcache_flush_range) -/* - * Walkaround to avoid loading wrong instruction after invalidating icache - * and following sequence is met. - * - * 1) One instruction address is cached in the instruction cache. - * 2) This instruction in SDRAM is changed. - * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). - * 4) This instruction is executed again, but the old one is loaded. - */ - P0 = R0; - IFLUSH[P0]; - do_flush FLUSH, IFLUSH -ENDPROC(_blackfin_icache_dcache_flush_range) - /* Throw away all D-cached data in specified region without any obligation to * write them back. Since the Blackfin ISA does not have an "invalidate" * instruction, we use flush/invalidate. Perhaps as a speed optimization we @@ -107,7 +91,7 @@ ENDPROC(_blackfin_dcache_invalidate_range) /* Flush all data cache lines assocoiated with this memory area */ ENTRY(_blackfin_dcache_flush_range) - do_flush FLUSH, , , .Ldfr + do_flush FLUSH, .Ldfr ENDPROC(_blackfin_dcache_flush_range) /* Our headers convert the page structure to an address, so just need to flush diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 35393651359b..ef6870e9eea6 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -72,6 +72,7 @@ void init_clocks(void) #endif bfin_write_PLL_LOCKCNT(0x300); do_sync(); + /* We always write PLL_CTL thus avoiding Anomaly 05000242 */ bfin_write16(PLL_CTL, PLL_CTL_VAL); __asm__ __volatile__("IDLE;"); bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 72e16605ca09..70e3411f558c 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -140,7 +140,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) cclk = get_cclk() / 1000; sclk = get_sclk() / 1000; -#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) min_cclk = sclk * 2; #else min_cclk = sclk; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index a063a434f7e3..da0558ad1b1a 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -36,7 +36,6 @@ #include <linux/init.h> #include <linux/linkage.h> #include <linux/unistd.h> -#include <linux/threads.h> #include <asm/blackfin.h> #include <asm/errno.h> #include <asm/fixed_code.h> @@ -201,7 +200,18 @@ ENTRY(_ex_single_step) cc = r7 == 0; if !cc jump 1f; #endif - +#ifdef CONFIG_EXACT_HWERR + /* Read the ILAT, and to check to see if the process we are + * single stepping caused a previous hardware error + * If so, do not single step, (which lowers to IRQ5, and makes + * us miss the error). + */ + p5.l = lo(ILAT); + p5.h = hi(ILAT); + r7 = [p5]; + cc = bittst(r7, EVT_IVHW_P); + if cc jump 1f; +#endif /* Single stepping only a single instruction, so clear the trace * bit here. */ r7 = syscfg; @@ -263,15 +273,6 @@ ENTRY(_bfin_return_from_exception) r6 = 0x25; CC = R7 == R6; if CC JUMP _double_fault; - - /* Did we cause a HW error? */ - p5.l = lo(ILAT); - p5.h = hi(ILAT); - r6 = [p5]; - r7 = 0x20; /* Did I just cause anther HW error? */ - r6 = r7 & r6; - CC = R7 == R6; - if CC JUMP _double_fault; #endif (R7:6,P5:4) = [sp++]; @@ -473,6 +474,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ [--sp] = ASTAT; [--sp] = (R7:6,P5:4); +#ifdef CONFIG_EXACT_HWERR + /* Make sure all pending read/writes complete. This will ensure any + * accesses which could cause hardware errors completes, and signal + * the the hardware before we do something silly, like crash the + * kernel. We don't need to work around anomaly 05000312, since + * we are already atomic + */ + ssync; +#endif + #if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; p5.h = HI(CHIPID); @@ -855,7 +866,7 @@ ENTRY(_ret_from_exception) p1.h = _schedule_and_signal; [p0] = p1; csync; - raise 15; /* raise evt14 to do signal or reschedule */ + raise 15; /* raise evt15 to do signal or reschedule */ 4: r0 = syscfg; bitclr(r0, 0); @@ -916,7 +927,7 @@ ENTRY(_return_from_int) p1.h = _schedule_and_signal_from_int; [p0] = p1; csync; -#if ANOMALY_05000281 +#if ANOMALY_05000281 || ANOMALY_05000461 r0.l = lo(SAFE_USER_INSTRUCTION); r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; @@ -930,18 +941,27 @@ ENTRY(_return_from_int) ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) -#if ANOMALY_05000281 +#if ANOMALY_05000281 || ANOMALY_05000461 r0.l = lo(SAFE_USER_INSTRUCTION); r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif - r0 = 0x401f; + +#ifdef CONFIG_DEBUG_HWERR + /* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */ + r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#else + /* Only enable irq14 interrupt, until we transition to _evt14_softirq */ + r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#endif sti r0; raise 14; rti; +ENDPROC(_lower_to_irq14) + ENTRY(_evt14_softirq) #ifdef CONFIG_DEBUG_HWERR - r0 = 0x3f; + r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); sti r0; #else cli r0; @@ -949,8 +969,9 @@ ENTRY(_evt14_softirq) [--sp] = RETI; SP += 4; rts; +ENDPROC(_evt14_softirq) -_schedule_and_signal_from_int: +ENTRY(_schedule_and_signal_from_int) /* To end up here, vector 15 was changed - so we have to change it * back. */ @@ -983,8 +1004,9 @@ _schedule_and_signal_from_int: call _finish_atomic_sections; sp += 12; jump.s .Lresume_userspace; +ENDPROC(_schedule_and_signal_from_int) -_schedule_and_signal: +ENTRY(_schedule_and_signal) SAVE_CONTEXT_SYSCALL /* To end up here, vector 15 was changed - so we have to change it * back. @@ -1002,7 +1024,7 @@ _schedule_and_signal: 1: RESTORE_CONTEXT rti; -ENDPROC(_lower_to_irq14) +ENDPROC(_schedule_and_signal) /* We handle this 100% in exception space - to reduce overhead * Only potiential problem is if the software buffer gets swapped out of the @@ -1588,19 +1610,3 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall .endr END(_sys_call_table) - -#ifdef CONFIG_EXCEPTION_L1_SCRATCH -/* .section .l1.bss.scratch */ -.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH -#else -#ifdef CONFIG_SYSCALL_TAB_L1 -.section .l1.bss -#else -.bss -#endif -ENTRY(_exception_stack) - .rept 1024 * NR_CPUS - .long 0 - .endr -_exception_stack_top: -#endif diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 698d4c05947e..f826f6b9f917 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -30,8 +30,6 @@ ENTRY(__init_clear_bss) rts; ENDPROC(__init_clear_bss) -#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) - ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; @@ -126,30 +124,30 @@ ENTRY(__start) * below */ GET_PDA(p0, r0); - r7 = [p0 + PDA_RETX]; + r6 = [p0 + PDA_RETX]; p1.l = _init_saved_retx; p1.h = _init_saved_retx; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_DCPLB]; + r6 = [p0 + PDA_DCPLB]; p1.l = _init_saved_dcplb_fault_addr; p1.h = _init_saved_dcplb_fault_addr; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_ICPLB]; + r6 = [p0 + PDA_ICPLB]; p1.l = _init_saved_icplb_fault_addr; p1.h = _init_saved_icplb_fault_addr; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_SEQSTAT]; + r6 = [p0 + PDA_SEQSTAT]; p1.l = _init_saved_seqstat; p1.h = _init_saved_seqstat; - [p1] = r7; + [p1] = r6; #endif /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); + sp.l = _init_thread_union; + sp.h = _init_thread_union; fp = sp; usp = sp; @@ -189,7 +187,15 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK + /* Only use on-chip scratch space for stack when absolutely required + * to avoid Anomaly 05000227 ... we know the init_clocks() func only + * uses L1 text and stack space and no other memory region. + */ +# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + sp.l = lo(KERNEL_CLOCK_STACK); + sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; + sp = usp; /* usp hasnt been touched, so restore from there */ #endif /* This section keeps the processor in supervisor mode @@ -243,9 +249,7 @@ ENTRY(_real_start) call _cmdline_init; /* Load the current thread pointer and stack */ - sp.l = _init_thread_union; - sp.h = _init_thread_union; - p1 = THREAD_SIZE (z); + p1 = THREAD_SIZE + 4 (z); /* +4 is for reti loading */ sp = sp + p1; usp = sp; fp = sp; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 0069c2dd4625..9c46680186e4 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -145,6 +145,14 @@ __common_int_entry: /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) + /* In case a single action kicks off multiple memory transactions, (like + * a cache line fetch, - this can cause multiple hardware errors, let's + * catch them all. First - make sure all the actions are complete, and + * the core sees the hardware errors. + */ + SSYNC; + SSYNC; + SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; @@ -159,6 +167,25 @@ ENTRY(_evt_ivhw) 1: #endif + /* Handle all stacked hardware errors + * To make sure we don't hang forever, only do it 10 times + */ + R0 = 0; + R2 = 10; +1: + P0.L = LO(ILAT); + P0.H = HI(ILAT); + R1 = [P0]; + CC = BITTST(R1, EVT_IVHW_P); + IF ! CC JUMP 2f; + /* OK a hardware error is pending - clear it */ + R1 = EVT_IVHW_P; + [P0] = R1; + R0 += 1; + CC = R1 == R2; + if CC JUMP 2f; + JUMP 1b; +2: # We are going to dump something out, so make sure we print IPEND properly p2.l = lo(IPEND); p2.h = hi(IPEND); diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index a7d7b2dd4059..351afd0e36d8 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1052,7 +1052,7 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) case IRQ_TIMER0: set_irq_handler(irq, handle_percpu_irq); break; @@ -1116,6 +1116,9 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + /* This implicitly covers ANOMALY_05000171 + * Boot-ROM code modifies SICA_IWRx wakeup registers + */ #ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); # ifdef SIC_IWR1 @@ -1136,13 +1139,6 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif -#ifdef CONFIG_IPIPE - for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_to_desc(irq); - desc->ic_prio = __ipipe_get_irq_priority(irq); - } -#endif /* CONFIG_IPIPE */ - return 0; } @@ -1156,23 +1152,22 @@ void do_irq(int vec, struct pt_regs *fp) } else { struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; if (smp_processor_id()) { -#ifdef CONFIG_SMP +# ifdef SICB_ISR0 /* This will be optimized out in UP mode. */ sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0(); sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1(); -#endif +# endif } else { sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); } -#ifdef CONFIG_BF54x +# ifdef SIC_ISR2 sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); -#endif +# endif for (;; ivg++) { if (ivg >= ivg_stop) { atomic_inc(&num_spurious); @@ -1236,20 +1231,16 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto core_tick; - } - SSYNC(); - -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - { + } else { +#if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); -#ifdef CONFIG_BF54x +# ifdef SIC_ISR2 sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); -#endif +# endif for (;; ivg++) { if (ivg >= ivg_stop) { atomic_inc(&num_spurious); @@ -1258,9 +1249,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) break; } - } #else - { unsigned long sic_status; sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); @@ -1272,15 +1261,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) } else if (sic_status & ivg->isrflag) break; } - } #endif - irq = ivg->irqno; + irq = ivg->irqno; + } if (irq == IRQ_SYSTMR) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#else +#ifndef CONFIG_GENERIC_CLOCKEVENTS bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ #endif /* This is basically what we need from the register frame. */ @@ -1292,9 +1279,6 @@ core_tick: __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -#ifndef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#endif if (this_domain == ipipe_root_domain) { s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); barrier(); @@ -1312,7 +1296,7 @@ core_tick: } } - return 0; + return 0; } #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 93eab6146079..3b8ebaee77f2 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -43,8 +43,13 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/cpu.h> +#include <asm/time.h> #include <linux/err.h> +/* + * Anomaly notes: + * 05000120 - we always define corelock as 32-bit integer in L2 + */ struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb, @@ -352,7 +357,7 @@ int __cpuinit __cpu_up(unsigned int cpu) static void __cpuinit setup_secondary(unsigned int cpu) { -#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)) +#if !defined(CONFIG_TICKSOURCE_GPTMR0) struct irq_desc *timer_desc; #endif unsigned long ilat; @@ -364,16 +369,13 @@ static void __cpuinit setup_secondary(unsigned int cpu) bfin_write_ILAT(ilat); CSYNC(); - /* Reserve the PDA space for the secondary CPU. */ - reserve_pda(); - /* Enable interrupt levels IVG7-15. IARs have been already * programmed by the boot CPU. */ bfin_irq_flags |= IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) /* Power down the core timer, just to play safe. */ bfin_write_TCNTL(0); diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h index 8cb0945563f9..bc0062884fde 100644 --- a/arch/blackfin/mm/blackfin_sram.h +++ b/arch/blackfin/mm/blackfin_sram.h @@ -30,7 +30,6 @@ #ifndef __BLACKFIN_SRAM_H__ #define __BLACKFIN_SRAM_H__ -extern void bfin_sram_init(void); extern void *l1sram_alloc(size_t); #endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 9c3629b9a689..014a55abd09a 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -52,9 +52,14 @@ static unsigned long empty_bad_page_table; static unsigned long empty_bad_page; -unsigned long empty_zero_page; +static unsigned long empty_zero_page; -extern unsigned long exception_stack[NR_CPUS][1024]; +#ifndef CONFIG_EXCEPTION_L1_SCRATCH +#if defined CONFIG_SYSCALL_TAB_L1 +__attribute__((l1_data)) +#endif +static unsigned long exception_stack[NR_CPUS][1024]; +#endif struct blackfin_pda cpu_pda[NR_CPUS]; EXPORT_SYMBOL(cpu_pda); @@ -117,19 +122,18 @@ asmlinkage void __init init_pda(void) cpu_pda[0].next = &cpu_pda[1]; cpu_pda[1].next = &cpu_pda[0]; +#ifdef CONFIG_EXCEPTION_L1_SCRATCH + cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \ + L1_SCRATCH_LENGTH); +#else cpu_pda[cpu].ex_stack = exception_stack[cpu + 1]; +#endif #ifdef CONFIG_SMP cpu_pda[cpu].imask = 0x1f; #endif } -void __cpuinit reserve_pda(void) -{ - printk(KERN_INFO "PDA for CPU%u reserved at %p\n", smp_processor_id(), - &cpu_pda[smp_processor_id()]); -} - void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; @@ -171,19 +175,6 @@ void __init mem_init(void) initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); } -static int __init sram_init(void) -{ - /* Initialize the blackfin L1 Memory. */ - bfin_sram_init(); - - /* Reserve the PDA space for the boot CPU right after we - * initialized the scratch memory allocator. - */ - reserve_pda(); - return 0; -} -pure_initcall(sram_init); - static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) { unsigned long addr; diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c index 22913e7a1818..c080e70f98b0 100644 --- a/arch/blackfin/mm/isram-driver.c +++ b/arch/blackfin/mm/isram-driver.c @@ -125,7 +125,7 @@ static bool isram_check_addr(const void *addr, size_t n) { if ((addr >= (void *)L1_CODE_START) && (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) { - if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) { + if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) { show_stack(NULL, NULL); printk(KERN_ERR "isram_memcpy: copy involving %p length " "(%zu) too long\n", addr, n); diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 530d1393a232..0bc3c4ef0aad 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -83,6 +83,14 @@ static struct kmem_cache *sram_piece_cache; static void __init l1sram_init(void) { unsigned int cpu; + unsigned long reserve; + +#ifdef CONFIG_SMP + reserve = 0; +#else + reserve = sizeof(struct l1_scratch_task_info); +#endif + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { per_cpu(free_l1_ssram_head, cpu).next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); @@ -91,8 +99,8 @@ static void __init l1sram_init(void) return; } - per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu); - per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH; + per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu) + reserve; + per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH - reserve; per_cpu(free_l1_ssram_head, cpu).next->pid = 0; per_cpu(free_l1_ssram_head, cpu).next->next = NULL; @@ -223,7 +231,7 @@ static void __init l2_sram_init(void) spin_lock_init(&l2_sram_lock); } -void __init bfin_sram_init(void) +static int __init bfin_sram_init(void) { sram_piece_cache = kmem_cache_create("sram_piece_cache", sizeof(struct sram_piece), @@ -233,7 +241,10 @@ void __init bfin_sram_init(void) l1_data_sram_init(); l1_inst_sram_init(); l2_sram_init(); + + return 0; } +pure_initcall(bfin_sram_init); /* SRAM allocate function */ static void *_sram_alloc(size_t size, struct sram_piece *pfree_head, @@ -732,6 +743,10 @@ found: } EXPORT_SYMBOL(sram_free_with_lsl); +/* Allocate memory and keep in L1 SRAM List (lsl) so that the resources are + * tracked. These are designed for userspace so that when a process exits, + * we can safely reap their resources. + */ void *sram_alloc_with_lsl(size_t size, unsigned long flags) { void *addr = NULL; |