diff options
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r-- | arch/avr32/boards/atngw100/Kconfig | 35 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/Makefile | 3 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/evklcd10x.c | 155 | ||||
-rw-r--r-- | arch/avr32/boards/atngw100/setup.c | 5 |
4 files changed, 197 insertions, 1 deletions
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig new file mode 100644 index 000000000000..b3f99477bbeb --- /dev/null +++ b/arch/avr32/boards/atngw100/Kconfig @@ -0,0 +1,35 @@ +# NGW100 customization + +if BOARD_ATNGW100 + +config BOARD_ATNGW100_EVKLCD10X + bool "Add support for EVKLCD10X addon board" + help + This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA) + addon board for the NGW100. By enabling this the LCD controller and + AC97 controller is added as platform devices. + + This choice disables the detect pin and the write-protect pin for the + MCI platform device, since it conflicts with the LCD platform device. + The MCI pins can be reenabled by editing the "add device function" but + this may break the setup for other displays that use these pins. + + Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100. + +choice + prompt "LCD panel resolution on EVKLCD10X" + depends on BOARD_ATNGW100_EVKLCD10X + default BOARD_ATNGW100_EVKLCD10X_VGA + +config BOARD_ATNGW100_EVKLCD10X_QVGA + bool "QVGA (320x240)" + +config BOARD_ATNGW100_EVKLCD10X_VGA + bool "VGA (640x480)" + +config BOARD_ATNGW100_EVKLCD10X_POW_QVGA + bool "Powertip QVGA (320x240)" + +endchoice + +endif # BOARD_ATNGW100 diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile index c740aa116755..6376f5322e4d 100644 --- a/arch/avr32/boards/atngw100/Makefile +++ b/arch/avr32/boards/atngw100/Makefile @@ -1 +1,2 @@ -obj-y += setup.o flash.o +obj-y += setup.o flash.o +obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c new file mode 100644 index 000000000000..8140b22b3461 --- /dev/null +++ b/arch/avr32/boards/atngw100/evklcd10x.c @@ -0,0 +1,155 @@ +/* + * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100 + * Network Gateway + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/fb.h> +#include <linux/platform_device.h> + +#include <video/atmel_lcdc.h> + +#include <asm/setup.h> + +#include <mach/at32ap700x.h> +#include <mach/board.h> + +static struct ac97c_platform_data __initdata ac97c0_data = { + .dma_rx_periph_id = 3, + .dma_tx_periph_id = 4, + .dma_controller_id = 0, + .reset_pin = GPIO_PIN_PB(19), +}; + +#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA +static struct fb_videomode __initdata tcg057vglad_modes[] = { + { + .name = "640x480 @ 60", + .refresh = 60, + .xres = 640, .yres = 480, + .pixclock = KHZ2PICOS(25180), + + .left_margin = 64, .right_margin = 31, + .upper_margin = 34, .lower_margin = 2, + .hsync_len = 96, .vsync_len = 4, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { + .manufacturer = "KYO", + .monitor = "TCG057VGLAD", + .modedb = tcg057vglad_modes, + .modedb_len = ARRAY_SIZE(tcg057vglad_modes), + .hfmin = 19948, + .hfmax = 31478, + .vfmin = 50, + .vfmax = 67, + .dclkmax = 28330000, +}; + +static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &atevklcd10x_default_monspecs, + .guard_time = 2, +}; +#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA +static struct fb_videomode __initdata tcg057qvlad_modes[] = { + { + .name = "320x240 @ 60", + .refresh = 60, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(6300), + + .left_margin = 52, .right_margin = 28, + .upper_margin = 7, .lower_margin = 2, + .hsync_len = 96, .vsync_len = 4, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { + .manufacturer = "KYO", + .monitor = "TCG057QVLAD", + .modedb = tcg057qvlad_modes, + .modedb_len = ARRAY_SIZE(tcg057qvlad_modes), + .hfmin = 19948, + .hfmax = 31478, + .vfmin = 50, + .vfmax = 67, + .dclkmax = 7000000, +}; + +static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &atevklcd10x_default_monspecs, + .guard_time = 2, +}; +#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA +static struct fb_videomode __initdata ph320240t_modes[] = { + { + .name = "320x240 @ 60", + .refresh = 60, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(6300), + + .left_margin = 38, .right_margin = 20, + .upper_margin = 15, .lower_margin = 5, + .hsync_len = 30, .vsync_len = 3, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { + .manufacturer = "POW", + .monitor = "PH320240T", + .modedb = ph320240t_modes, + .modedb_len = ARRAY_SIZE(ph320240t_modes), + .hfmin = 14400, + .hfmax = 21600, + .vfmin = 50, + .vfmax = 90, + .dclkmax = 6400000, +}; + +static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &atevklcd10x_default_monspecs, + .guard_time = 2, +}; +#endif + +static int __init atevklcd10x_init(void) +{ + at32_add_device_ac97c(0, &ac97c0_data); + + at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, + fbmem_start, fbmem_size, 1); + return 0; +} +postcore_initcall(atevklcd10x_init); diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 6c54580a66df..af38ab3e4502 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = { static struct mci_platform_data __initdata mci0_data = { .slot[0] = { .bus_width = 4, +#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X .detect_pin = GPIO_PIN_PC(25), .wp_pin = GPIO_PIN_PE(0), +#else + .detect_pin = GPIO_PIN_NONE, + .wp_pin = GPIO_PIN_NONE, +#endif }, }; |