summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig18
-rw-r--r--arch/arm/Kconfig.debug5
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/Makefile5
-rw-r--r--arch/arm/mach-kirkwood/Kconfig111
-rw-r--r--arch/arm/mach-kirkwood/Makefile14
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot3
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c223
-rw-r--r--arch/arm/mach-kirkwood/common.c746
-rw-r--r--arch/arm/mach-kirkwood/common.h74
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c231
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h86
-rw-r--r--arch/arm/mach-kirkwood/include/mach/entry-macro.S34
-rw-r--r--arch/arm/mach-kirkwood/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-kirkwood/include/mach/irqs.h65
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h142
-rw-r--r--arch/arm/mach-kirkwood/include/mach/uncompress.h46
-rw-r--r--arch/arm/mach-kirkwood/irq.c82
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.c114
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.h16
-rw-r--r--arch/arm/mach-kirkwood/mpp.c43
-rw-r--r--arch/arm/mach-kirkwood/mpp.h348
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c422
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c255
-rw-r--r--arch/arm/mach-kirkwood/pcie.c296
-rw-r--r--arch/arm/mach-kirkwood/pm.c76
-rw-r--r--arch/arm/mach-kirkwood/pm.h26
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c89
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c128
-rw-r--r--arch/arm/mach-kirkwood/t5325-setup.c216
-rw-r--r--arch/arm/mach-kirkwood/ts219-setup.c142
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c186
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.c113
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.h7
-rw-r--r--arch/arm/mm/Kconfig2
35 files changed, 4 insertions, 4375 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87b63fde06d7..b20251ad7aa5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -536,22 +536,6 @@ config ARCH_DOVE
help
Support for the Marvell Dove SoC 88AP510
-config ARCH_KIRKWOOD
- bool "Marvell Kirkwood"
- select ARCH_HAS_CPUFREQ
- select ARCH_REQUIRE_GPIOLIB
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select MVEBU_MBUS
- select PCI
- select PCI_QUIRKS
- select PINCTRL
- select PINCTRL_KIRKWOOD
- select PLAT_ORION_LEGACY
- help
- Support for the following Marvell Kirkwood series SoCs:
- 88F6180, 88F6192 and 88F6281.
-
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
@@ -966,8 +950,6 @@ source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
-
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8f90595069a1..20f49e9ad26e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1033,7 +1033,7 @@ config DEBUG_UART_8250
def_bool ARCH_DOVE || ARCH_EBSA110 || \
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
+ ARCH_IOP33X || ARCH_IXP4XX || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
config DEBUG_UART_PHYS
@@ -1089,7 +1089,7 @@ config DEBUG_UART_PHYS
default 0xe0000000 if ARCH_SPEAR13XX
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+ default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
@@ -1154,7 +1154,6 @@ config DEBUG_UART_VIRT
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
- default 0xfed12000 if ARCH_KIRKWOOD
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6721fab13734..433a6f1b218f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -163,7 +163,6 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
-machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5986ff63b901..025350ca96aa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,8 +90,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb
-kirkwood := \
- kirkwood-b3.dtb \
+dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
@@ -150,8 +149,6 @@ kirkwood := \
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
-dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
deleted file mode 100644
index df4b26340ae4..000000000000
--- a/arch/arm/mach-kirkwood/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-if ARCH_KIRKWOOD
-
-menu "Marvell Kirkwood Implementations"
-
-config KIRKWOOD_LEGACY
- bool
-
-config MACH_D2NET_V2
- bool "LaCie d2 Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie d2 Network v2 NAS.
-
-config MACH_NET2BIG_V2
- bool "LaCie 2Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big Network v2 NAS.
-
-config MACH_NET5BIG_V2
- bool "LaCie 5Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 5Big Network v2 NAS.
-
-config MACH_OPENRD
- select KIRKWOOD_LEGACY
- bool
-
-config MACH_OPENRD_BASE
- bool "Marvell OpenRD Base Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Base Board.
-
-config MACH_OPENRD_CLIENT
- bool "Marvell OpenRD Client Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Client Board.
-
-config MACH_OPENRD_ULTIMATE
- bool "Marvell OpenRD Ultimate Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Ultimate Board.
-
-config MACH_RD88F6192_NAS
- bool "Marvell RD-88F6192-NAS Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6192-NAS Reference Board.
-
-config MACH_RD88F6281
- bool "Marvell RD-88F6281 Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6281 Reference Board.
-
-config MACH_T5325
- bool "HP t5325 Thin Client"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
- TS-219P+ Turbo NAS devices.
-
-config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
- NAS devices.
-
-comment "Device tree entries"
-
-config ARCH_KIRKWOOD_DT
- bool "Marvell Kirkwood Flattened Device Tree"
- select KIRKWOOD_CLK
- select OF_IRQ
- select ORION_IRQCHIP
- select ORION_TIMER
- select POWER_SUPPLY
- select POWER_RESET
- select POWER_RESET_GPIO
- select REGULATOR
- select REGULATOR_FIXED_VOLTAGE
- select USE_OF
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Kirkwood using flattened device tree.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
deleted file mode 100644
index 3a72c5c6e747..000000000000
--- a/arch/arm/mach-kirkwood/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
-obj-$(CONFIG_PM) += pm.o
-
-obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
-obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-
-obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
deleted file mode 100644
index ff18ff20f71f..000000000000
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dt.c
- *
- * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_net.h>
-#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqchip.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include <plat/common.h>
-#include <plat/pcie.h>
-#include "pm.h"
-
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-static void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-static void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/* Temporary here since mach-mvebu has a function we can use */
-static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
-#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
-
-static void __init kirkwood_dt_eth_fixup(void)
-{
- struct device_node *np;
-
- /*
- * The ethernet interfaces forget the MAC address assigned by u-boot
- * if the clocks are turned off. Usually, u-boot on kirkwood boards
- * has no DT support to properly set local-mac-address property.
- * As a workaround, we get the MAC address from mv643xx_eth registers
- * and update the port device node if no valid MAC address is set.
- */
- for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
- struct device_node *pnp = of_get_parent(np);
- struct clk *clk;
- struct property *pmac;
- void __iomem *io;
- u8 *macaddr;
- u32 reg;
-
- if (!pnp)
- continue;
-
- /* skip disabled nodes or nodes with valid MAC address*/
- if (!of_device_is_available(pnp) || of_get_mac_address(np))
- goto eth_fixup_skip;
-
- clk = of_clk_get(pnp, 0);
- if (IS_ERR(clk))
- goto eth_fixup_skip;
-
- io = of_iomap(pnp, 0);
- if (!io)
- goto eth_fixup_no_map;
-
- /* ensure port clock is not gated to not hang CPU */
- clk_prepare_enable(clk);
-
- /* store MAC address register contents in local-mac-address */
- pr_err(FW_INFO "%s: local-mac-address is not set\n",
- np->full_name);
-
- pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
- if (!pmac)
- goto eth_fixup_no_mem;
-
- pmac->value = pmac + 1;
- pmac->length = 6;
- pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
- if (!pmac->name) {
- kfree(pmac);
- goto eth_fixup_no_mem;
- }
-
- macaddr = pmac->value;
- reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
- macaddr[0] = (reg >> 24) & 0xff;
- macaddr[1] = (reg >> 16) & 0xff;
- macaddr[2] = (reg >> 8) & 0xff;
- macaddr[3] = reg & 0xff;
-
- reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
- macaddr[4] = (reg >> 8) & 0xff;
- macaddr[5] = reg & 0xff;
-
- of_update_property(np, pmac);
-
-eth_fixup_no_mem:
- iounmap(io);
- clk_disable_unprepare(clk);
-eth_fixup_no_map:
- clk_put(clk);
-eth_fixup_skip:
- of_node_put(pnp);
- }
-}
-
-/*
- * Disable propagation of mbus errors to the CPU local bus, as this
- * causes mbus errors (which can occur for example for PCI aborts) to
- * throw CPU aborts, which we're not set up to deal with.
- */
-static void __init kirkwood_disable_mbus_error_propagation(void)
-{
- void __iomem *cpu_config;
-
- cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
- writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
- iounmap(cpu_config);
-}
-
-static void __init kirkwood_dt_init(void)
-{
- kirkwood_disable_mbus_error_propagation();
-
- BUG_ON(mvebu_mbus_dt_init(false));
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
- feroceon_of_init();
-#endif
- kirkwood_cpufreq_init();
- kirkwood_cpuidle_init();
-
- kirkwood_pm_init();
- kirkwood_dt_eth_fixup();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const kirkwood_dt_board_compat[] = {
- "marvell,kirkwood",
- NULL
-};
-
-DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
- /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
- .map_io = kirkwood_map_io,
- .init_machine = kirkwood_dt_init,
- .restart = kirkwood_restart,
- .dt_compat = kirkwood_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
deleted file mode 100644
index 255f33a3903c..000000000000
--- a/arch/arm/mach-kirkwood/common.c
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.c
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/nand.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx_i2c.h>
-#include <linux/timex.h>
-#include <linux/kexec.h>
-#include <linux/reboot.h>
-#include <net/dsa.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/asoc-kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <plat/common.h>
-#include <plat/time.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include "common.h"
-#include "pm.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_NAND_TARGET 0x01
-#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
-#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
-#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-/*****************************************************************************
- * CLK tree
- ****************************************************************************/
-
-static void enable_sata0(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
-}
-
-static void disable_sata0(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
-}
-
-static void enable_sata1(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
-}
-
-static void disable_sata1(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
-}
-
-static void disable_pcie0(void)
-{
- writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
- while (1)
- if (readl(PCIE_STATUS) & 0x1)
- break;
- writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
-}
-
-static void disable_pcie1(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6282_DEV_ID) {
- writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
- while (1)
- if (readl(PCIE1_STATUS) & 0x1)
- break;
- writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
- }
-}
-
-/* An extended version of the gated clk. This calls fn_en()/fn_dis
- * before enabling/disabling the clock. We use this to turn on/off
- * PHYs etc. */
-struct clk_gate_fn {
- struct clk_gate gate;
- void (*fn_en)(void);
- void (*fn_dis)(void);
-};
-
-#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
-
-static int clk_gate_fn_enable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
- int ret;
-
- ret = clk_gate_ops.enable(hw);
- if (!ret && gate_fn->fn_en)
- gate_fn->fn_en();
-
- return ret;
-}
-
-static void clk_gate_fn_disable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
-
- if (gate_fn->fn_dis)
- gate_fn->fn_dis();
-
- clk_gate_ops.disable(hw);
-}
-
-static struct clk_ops clk_gate_fn_ops;
-
-static struct clk __init *clk_register_gate_fn(struct device *dev,
- const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock,
- void (*fn_en)(void), void (*fn_dis)(void))
-{
- struct clk_gate_fn *gate_fn;
- struct clk *clk;
- struct clk_init_data init;
-
- gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
- if (!gate_fn) {
- pr_err("%s: could not allocate gated clk\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- init.name = name;
- init.ops = &clk_gate_fn_ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- /* struct clk_gate assignments */
- gate_fn->gate.reg = reg;
- gate_fn->gate.bit_idx = bit_idx;
- gate_fn->gate.flags = clk_gate_flags;
- gate_fn->gate.lock = lock;
- gate_fn->gate.hw.init = &init;
- gate_fn->fn_en = fn_en;
- gate_fn->fn_dis = fn_dis;
-
- /* ops is the gate ops, but with our enable/disable functions */
- if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
- clk_gate_fn_ops.disable != clk_gate_fn_disable) {
- clk_gate_fn_ops = clk_gate_ops;
- clk_gate_fn_ops.enable = clk_gate_fn_enable;
- clk_gate_fn_ops.disable = clk_gate_fn_disable;
- }
-
- clk = clk_register(dev, &gate_fn->gate.hw);
-
- if (IS_ERR(clk))
- kfree(gate_fn);
-
- return clk;
-}
-
-static DEFINE_SPINLOCK(gating_lock);
-static struct clk *tclk;
-
-static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
-{
- return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock);
-}
-
-static struct clk __init *kirkwood_register_gate_fn(const char *name,
- u8 bit_idx,
- void (*fn_en)(void),
- void (*fn_dis)(void))
-{
- return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock, fn_en, fn_dis);
-}
-
-static struct clk *ge0, *ge1;
-
-void __init kirkwood_clk_init(void)
-{
- struct clk *runit, *sata0, *sata1, *usb0, *sdio;
- struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
-
- tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
- CLK_IS_ROOT, kirkwood_tclk);
-
- runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT);
- ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
- ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
- sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
- enable_sata0, disable_sata0);
- sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
- enable_sata1, disable_sata1);
- usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
- sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
- crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
- xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
- xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
- pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
- NULL, disable_pcie0);
- pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
- NULL, disable_pcie1);
- audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
- kirkwood_register_gate("tdm", CGC_BIT_TDM);
- kirkwood_register_gate("tsu", CGC_BIT_TSU);
-
- /* clkdev entries, mapping clks to devices */
- orion_clkdev_add(NULL, "orion_spi.0", runit);
- orion_clkdev_add(NULL, "orion_spi.1", runit);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
- orion_clkdev_add(NULL, "orion_wdt", tclk);
- orion_clkdev_add("0", "sata_mv.0", sata0);
- orion_clkdev_add("1", "sata_mv.0", sata1);
- orion_clkdev_add(NULL, "orion-ehci.0", usb0);
- orion_clkdev_add(NULL, "orion_nand", runit);
- orion_clkdev_add(NULL, "mvsdio", sdio);
- orion_clkdev_add(NULL, "mv_crypto", crypto);
- orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
- orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
- orion_clkdev_add("0", "pcie", pex0);
- orion_clkdev_add("1", "pcie", pex1);
- orion_clkdev_add(NULL, "mvebu-audio", audio);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
-
- /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
- * so should never be gated.
- */
- clk_prepare_enable(runit);
-}
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init kirkwood_ehci_init(void)
-{
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge00_init(eth_data,
- GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR, 1600);
- /* The interface forgets the MAC address assigned by u-boot if
- the clock is turned off, so claim the clk now. */
- clk_prepare_enable(ge0);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge01_init(eth_data,
- GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR, 1600);
- clk_prepare_enable(ge1);
-}
-
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
-{
- orion_ge00_switch_init(d, irq);
-}
-
-
-/*****************************************************************************
- * NAND flash
- ****************************************************************************/
-static struct resource kirkwood_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data kirkwood_nand_data = {
- .cle = 0,
- .ale = 1,
- .width = 8,
-};
-
-static struct platform_device kirkwood_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &kirkwood_nand_data,
- },
- .resource = &kirkwood_nand_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
- int chip_delay)
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.chip_delay = chip_delay;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *))
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.dev_ready = dev_ready;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-static void __init kirkwood_rtc_init(void)
-{
- orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
-}
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
-{
- orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
-}
-
-
-/*****************************************************************************
- * SD/SDIO/MMC
- ****************************************************************************/
-static struct resource mvsdio_resources[] = {
- [0] = {
- .start = SDIO_PHYS_BASE,
- .end = SDIO_PHYS_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_SDIO,
- .end = IRQ_KIRKWOOD_SDIO,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device kirkwood_sdio = {
- .name = "mvsdio",
- .id = -1,
- .dev = {
- .dma_mask = &mvsdio_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mvsdio_resources),
- .resource = mvsdio_resources,
-};
-
-void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
- mvsdio_data->clock = 100000000;
- else
- mvsdio_data->clock = 200000000;
- kirkwood_sdio.dev.platform_data = mvsdio_data;
- platform_device_register(&kirkwood_sdio);
-}
-
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init kirkwood_spi_init(void)
-{
- orion_spi_init(SPI_PHYS_BASE);
-}
-
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init kirkwood_i2c_init(void)
-{
- orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-
-void __init kirkwood_uart0_init(void)
-{
- orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_KIRKWOOD_UART_0, tclk);
-}
-
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init kirkwood_uart1_init(void)
-{
- orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_KIRKWOOD_UART_1, tclk);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-void __init kirkwood_crypto_init(void)
-{
- orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
-}
-
-
-/*****************************************************************************
- * XOR0
- ****************************************************************************/
-void __init kirkwood_xor0_init(void)
-{
- orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
-}
-
-
-/*****************************************************************************
- * XOR1
- ****************************************************************************/
-void __init kirkwood_xor1_init(void)
-{
- orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
-}
-
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-void __init kirkwood_wdt_init(void)
-{
- orion_wdt_init();
-}
-
-/*****************************************************************************
- * CPU idle
- ****************************************************************************/
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init kirkwood_init_early(void)
-{
- orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-int kirkwood_tclk;
-
-static int __init kirkwood_find_tclk(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
- if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
- return 200000000;
-
- return 166666667;
-}
-
-void __init kirkwood_timer_init(void)
-{
- kirkwood_tclk = kirkwood_find_tclk();
-
- orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
- IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-/*****************************************************************************
- * Audio
- ****************************************************************************/
-static struct resource kirkwood_audio_resources[] = {
- [0] = {
- .start = AUDIO_PHYS_BASE,
- .end = AUDIO_PHYS_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_I2S,
- .end = IRQ_KIRKWOOD_I2S,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
- .burst = 128,
-};
-
-static struct platform_device kirkwood_audio_device = {
- .name = "mvebu-audio",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_audio_resources),
- .resource = kirkwood_audio_resources,
- .dev = {
- .platform_data = &kirkwood_audio_data,
- },
-};
-
-void __init kirkwood_audio_init(void)
-{
- platform_device_register(&kirkwood_audio_device);
-}
-
-/*****************************************************************************
- * CPU Frequency
- ****************************************************************************/
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-/*
- * Identify device ID and revision.
- */
-char * __init kirkwood_id(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID) {
- if (rev == MV88F6281_REV_Z0)
- return "MV88F6281-Z0";
- else if (rev == MV88F6281_REV_A0)
- return "MV88F6281-A0";
- else if (rev == MV88F6281_REV_A1)
- return "MV88F6281-A1";
- else
- return "MV88F6281-Rev-Unsupported";
- } else if (dev == MV88F6192_DEV_ID) {
- if (rev == MV88F6192_REV_Z0)
- return "MV88F6192-Z0";
- else if (rev == MV88F6192_REV_A0)
- return "MV88F6192-A0";
- else if (rev == MV88F6192_REV_A1)
- return "MV88F6192-A1";
- else
- return "MV88F6192-Rev-Unsupported";
- } else if (dev == MV88F6180_DEV_ID) {
- if (rev == MV88F6180_REV_A0)
- return "MV88F6180-Rev-A0";
- else if (rev == MV88F6180_REV_A1)
- return "MV88F6180-Rev-A1";
- else
- return "MV88F6180-Rev-Unsupported";
- } else if (dev == MV88F6282_DEV_ID) {
- if (rev == MV88F6282_REV_A0)
- return "MV88F6282-Rev-A0";
- else if (rev == MV88F6282_REV_A1)
- return "MV88F6282-Rev-A1";
- else
- return "MV88F6282-Rev-Unsupported";
- } else {
- return "Device-Unknown";
- }
-}
-
-void __init kirkwood_setup_wins(void)
-{
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
- KIRKWOOD_MBUS_NAND_ATTR,
- KIRKWOOD_NAND_MEM_PHYS_BASE,
- KIRKWOOD_NAND_MEM_SIZE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
- KIRKWOOD_MBUS_SRAM_ATTR,
- KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE);
-}
-
-void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
- writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(1);
-#else
- writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(0);
-#endif
-#endif
-}
-
-void __init kirkwood_init(void)
-{
- pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
-
- /*
- * Disable propagation of mbus errors to the CPU local bus,
- * as this causes mbus errors (which can occur for example
- * for PCI aborts) to throw CPU aborts, which we're not set
- * up to deal with.
- */
- writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
-
- BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
-
- kirkwood_setup_wins();
-
- kirkwood_l2_init();
-
- /* Setup root of clk tree */
- kirkwood_clk_init();
-
- /* internal devices that every board has */
- kirkwood_rtc_init();
- kirkwood_wdt_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
- kirkwood_crypto_init();
-
- kirkwood_pm_init();
- kirkwood_cpuidle_init();
-#ifdef CONFIG_KEXEC
- kexec_reinit = kirkwood_enable_pcie;
-#endif
-}
-
-void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
deleted file mode 100644
index 832a4e2ab8d7..000000000000
--- a/arch/arm/mach-kirkwood/common.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.h
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_COMMON_H
-#define __ARCH_KIRKWOOD_COMMON_H
-
-#include <linux/reboot.h>
-
-struct dsa_platform_data;
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-struct mvsdio_platform_data;
-struct mtd_partition;
-struct mtd_info;
-struct kirkwood_asoc_platform_data;
-
-#define KW_PCIE0 (1 << 0)
-#define KW_PCIE1 (1 << 1)
-
-/*
- * Basic Kirkwood init functions used early by machine-setup.
- */
-void kirkwood_map_io(void);
-void kirkwood_init(void);
-void kirkwood_init_early(void);
-void kirkwood_init_irq(void);
-
-void kirkwood_setup_wins(void);
-
-void kirkwood_enable_pcie(void);
-void kirkwood_pcie_id(u32 *dev, u32 *rev);
-
-void kirkwood_ehci_init(void);
-void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(unsigned int portmask);
-void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
-void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
-void kirkwood_spi_init(void);
-void kirkwood_i2c_init(void);
-void kirkwood_uart0_init(void);
-void kirkwood_uart1_init(void);
-void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *));
-void kirkwood_audio_init(void);
-void kirkwood_cpuidle_init(void);
-void kirkwood_cpufreq_init(void);
-
-void kirkwood_restart(enum reboot_mode, const char *);
-void kirkwood_clk_init(void);
-
-/* early init functions not converted to fdt yet */
-char *kirkwood_id(void);
-void kirkwood_l2_init(void);
-void kirkwood_wdt_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
-void kirkwood_crypto_init(void);
-
-extern int kirkwood_tclk;
-extern void kirkwood_timer_init(void);
-
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
deleted file mode 100644
index 453418063c1e..000000000000
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/d2net_v2-setup.c
- *
- * LaCie d2 Network Space v2 Board Setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_PUSH_BUTTON 34
-#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
-#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
-
-#define D2NET_V2_SWITCH_POWER_ON 0x1
-#define D2NET_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button d2net_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_ON,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 0,
- },
- [1] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_OFF,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 0,
- },
- [2] = {
- .code = KEY_POWER,
- .gpio = D2NET_V2_GPIO_PUSH_BUTTON,
- .desc = "Front Push Button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data d2net_v2_button_data = {
- .buttons = d2net_v2_buttons,
- .nbuttons = ARRAY_SIZE(d2net_v2_buttons),
-};
-
-static struct platform_device d2net_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_RED_LED 12
-
-static struct gpio_led d2net_v2_gpio_led_pins[] = {
- {
- .name = "d2net_v2:red:fail",
- .gpio = D2NET_V2_GPIO_RED_LED,
- },
-};
-
-static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
- .leds = d2net_v2_gpio_led_pins,
-};
-
-static struct platform_device d2net_v2_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_gpio_leds_data,
- },
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
-#define D2NET_V2_GPIO_BLUE_LED_CMD 30
-
-static struct ns2_led d2net_v2_led_pins[] = {
- {
- .name = "d2net_v2:blue:sata",
- .cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
- .slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
- },
-};
-
-static struct ns2_led_platform_data d2net_v2_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_led_pins),
- .leds = d2net_v2_led_pins,
-};
-
-static struct platform_device d2net_v2_leds = {
- .name = "leds-ns2",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO, /* Red led */
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA 0 power */
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* Blue led (slow register) */
- MPP30_GPIO, /* Blue led (command register) */
- MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
- MPP35_GPIO, /* Inhibit power-off */
- 0
-};
-
-#define D2NET_V2_GPIO_POWER_OFF 7
-
-static void d2net_v2_power_off(void)
-{
- gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init d2net_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(d2net_v2_mpp_config);
-
- lacie_v2_hdd_power_init(1);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&d2net_v2_ge00_data);
- kirkwood_sata_init(&d2net_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- platform_device_register(&d2net_v2_leds);
- platform_device_register(&d2net_v2_gpio_leds);
- platform_device_register(&d2net_v2_gpio_buttons);
-
- if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = d2net_v2_power_off;
- else
- pr_err("d2net_v2: failed to configure power-off GPIO\n");
-}
-
-MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .atag_offset = 0x100,
- .init_machine = d2net_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
deleted file mode 100644
index 1c37082c8b39..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
-#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
-#define CPU_CONFIG_ERROR_PROP 0x00000004
-
-#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
-#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
-#define CPU_RESET 0x00000002
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
-#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
-
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
-#define CGC_BIT_GE0 (0)
-#define CGC_BIT_PEX0 (2)
-#define CGC_BIT_USB0 (3)
-#define CGC_BIT_SDIO (4)
-#define CGC_BIT_TSU (5)
-#define CGC_BIT_DUNIT (6)
-#define CGC_BIT_RUNIT (7)
-#define CGC_BIT_XOR0 (8)
-#define CGC_BIT_AUDIO (9)
-#define CGC_BIT_SATA0 (14)
-#define CGC_BIT_SATA1 (15)
-#define CGC_BIT_XOR1 (16)
-#define CGC_BIT_CRYPTO (17)
-#define CGC_BIT_PEX1 (18)
-#define CGC_BIT_GE1 (19)
-#define CGC_BIT_TDM (20)
-#define CGC_GE0 (1 << 0)
-#define CGC_PEX0 (1 << 2)
-#define CGC_USB0 (1 << 3)
-#define CGC_SDIO (1 << 4)
-#define CGC_TSU (1 << 5)
-#define CGC_DUNIT (1 << 6)
-#define CGC_RUNIT (1 << 7)
-#define CGC_XOR0 (1 << 8)
-#define CGC_AUDIO (1 << 9)
-#define CGC_POWERSAVE (1 << 11)
-#define CGC_SATA0 (1 << 14)
-#define CGC_SATA1 (1 << 15)
-#define CGC_XOR1 (1 << 16)
-#define CGC_CRYPTO (1 << 17)
-#define CGC_PEX1 (1 << 18)
-#define CGC_GE1 (1 << 19)
-#define CGC_TDM (1 << 20)
-#define CGC_RESERVED (0x6 << 21)
-
-#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
-#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
deleted file mode 100644
index 82db29f7af8f..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
deleted file mode 100644
index 742b74f43e41..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
deleted file mode 100644
index 2bf8161e3b51..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM 0
-#define IRQ_KIRKWOOD_BRIDGE 1
-#define IRQ_KIRKWOOD_HOST2CPU 2
-#define IRQ_KIRKWOOD_CPU2HOST 3
-#define IRQ_KIRKWOOD_XOR_00 5
-#define IRQ_KIRKWOOD_XOR_01 6
-#define IRQ_KIRKWOOD_XOR_10 7
-#define IRQ_KIRKWOOD_XOR_11 8
-#define IRQ_KIRKWOOD_PCIE 9
-#define IRQ_KIRKWOOD_PCIE1 10
-#define IRQ_KIRKWOOD_GE00_SUM 11
-#define IRQ_KIRKWOOD_GE01_SUM 15
-#define IRQ_KIRKWOOD_USB 19
-#define IRQ_KIRKWOOD_SATA 21
-#define IRQ_KIRKWOOD_CRYPTO 22
-#define IRQ_KIRKWOOD_SPI 23
-#define IRQ_KIRKWOOD_I2S 24
-#define IRQ_KIRKWOOD_TS_0 26
-#define IRQ_KIRKWOOD_SDIO 28
-#define IRQ_KIRKWOOD_TWSI 29
-#define IRQ_KIRKWOOD_AVB 30
-#define IRQ_KIRKWOOD_TDMI 31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0 33
-#define IRQ_KIRKWOOD_UART_1 34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
-#define IRQ_KIRKWOOD_GE00_ERR 46
-#define IRQ_KIRKWOOD_GE01_ERR 47
-#define IRQ_KIRKWOOD_RTC 53
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START 64
-#define NR_GPIO_IRQS 50
-
-#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
deleted file mode 100644
index 92976cef3910..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe #0 Memory space
- * e8000000 PCIe #1 Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe #0 I/O space
- * f3000000 PCIe #1 I/O space
- * f4000000 NAND controller address window
- * f5000000 Security Accelerator SRAM
- *
- * virt phys size
- * fed00000 f1000000 1M on-chip peripheral registers
- * fee00000 f2000000 1M PCIe #0 I/O space
- * fef00000 f3000000 1M PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
-#define KIRKWOOD_SRAM_SIZE SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
-#define DDR_WINDOW_CPU_SZ (0x20)
-#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
-#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
-#define BRIDGE_WINS_SZ (0x80)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-#define MV88F6281_REV_A1 3
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-#define MV88F6192_REV_A1 3
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-#define MV88F6180_REV_A1 3
-
-#define MV88F6282_DEV_ID 0x6282
-#define MV88F6282_REV_A0 0
-#define MV88F6282_REV_A1 1
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
deleted file mode 100644
index 5bca5534021f..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
deleted file mode 100644
index 2c47a8ad0e27..000000000000
--- a/arch/arm/mach-kirkwood/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/irq.c
- *
- * Kirkwood IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/exception.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/orion-gpio.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static int __initdata gpio0_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_LOW_0_7,
- IRQ_KIRKWOOD_GPIO_LOW_8_15,
- IRQ_KIRKWOOD_GPIO_LOW_16_23,
- IRQ_KIRKWOOD_GPIO_LOW_24_31,
-};
-
-static int __initdata gpio1_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_HIGH_0_7,
- IRQ_KIRKWOOD_GPIO_HIGH_8_15,
- IRQ_KIRKWOOD_GPIO_HIGH_16_23,
- 0,
-};
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
-static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
-{
- u32 stat;
-
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
- if (stat) {
- unsigned int hwirq = __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
- if (stat) {
- unsigned int hwirq = 32 + __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
-}
-#endif
-
-void __init kirkwood_init_irq(void)
-{
- orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
- orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
- set_handle_irq(kirkwood_legacy_handle_irq);
-#endif
-
- /*
- * Initialize gpiolib for GPIOs 0-49.
- */
- orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
deleted file mode 100644
index 8e3e4331c380..000000000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/gpio.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/irqs.h>
-#include <plat/time.h>
-#include "common.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition lacie_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data lacie_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = lacie_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &lacie_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init lacie_v2_register_flash(void)
-{
- spi_register_board_info(lacie_v2_spi_slave_info,
- ARRAY_SIZE(lacie_v2_spi_slave_info));
- kirkwood_spi_init();
-}
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-void __init lacie_v2_register_i2c_devices(void)
-{
- kirkwood_i2c_init();
- i2c_register_board_info(0, lacie_v2_i2c_info,
- ARRAY_SIZE(lacie_v2_i2c_info));
-}
-
-/*****************************************************************************
- * Hard Disk power
- ****************************************************************************/
-
-static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-void __init lacie_v2_hdd_power_init(int hdd_num)
-{
- int i;
- int err;
-
- /* Power up all hard disks. */
- for (i = 0; i < hdd_num; i++) {
- err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
- if (err == 0) {
- err = gpio_direction_output(
- lacie_v2_gpio_hdd_power[i], 1);
- /* Free the HDD power GPIOs. This allow user-space to
- * configure them via the gpiolib sysfs interface. */
- gpio_free(lacie_v2_gpio_hdd_power[i]);
- }
- if (err)
- pr_err("Failed to power up HDD%d\n", i + 1);
- }
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
deleted file mode 100644
index fc64f578536e..000000000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-
-void lacie_v2_register_flash(void);
-void lacie_v2_register_i2c_devices(void);
-void lacie_v2_hdd_power_init(int hdd_num);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
deleted file mode 100644
index e96fd71abd76..000000000000
--- a/arch/arm/mach-kirkwood/mpp.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mpp.c
- *
- * MPP functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int __init kirkwood_variant(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
- return MPP_F6281_MASK;
- if (dev == MV88F6282_DEV_ID)
- return MPP_F6282_MASK;
- if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
- return MPP_F6192_MASK;
- if (dev == MV88F6180_DEV_ID)
- return MPP_F6180_MASK;
-
- pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
- dev, rev);
- return 0;
-}
-
-void __init kirkwood_mpp_conf(unsigned int *mpp_list)
-{
- orion_mpp_conf(mpp_list, kirkwood_variant(),
- MPP_MAX, DEV_BUS_VIRT_BASE);
-}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
deleted file mode 100644
index d5a0d1da2e0e..000000000000
--- a/arch/arm/mach-kirkwood/mpp.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
- *
- * Copyright 2009: Marvell Technology Group Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __KIRKWOOD_MPP_H
-#define __KIRKWOOD_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
- /* MPP number */ ((_num) & 0xff) | \
- /* MPP select value */ (((_sel) & 0xf) << 8) | \
- /* may be input signal */ ((!!(_in)) << 12) | \
- /* may be output signal */ ((!!(_out)) << 13) | \
- /* available on F6180 */ ((!!(_F6180)) << 14) | \
- /* available on F6190 */ ((!!(_F6190)) << 15) | \
- /* available on F6192 */ ((!!(_F6192)) << 16) | \
- /* available on F6281 */ ((!!(_F6281)) << 17) | \
- /* available on F6282 */ ((!!(_F6282)) << 18))
-
- /* num sel i o 6180 6190 6192 6281 6282 */
-
-#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 )
-#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 )
-#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 )
-#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-
-#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP_MAX 49
-
-void kirkwood_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
deleted file mode 100644
index 913d032cdb19..000000000000
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netxbig_v2-setup.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netxbig_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
-#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
-#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
-
-#define NETXBIG_V2_SWITCH_POWER_ON 0x1
-#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button netxbig_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_ON,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 1,
- },
- [1] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_OFF,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 1,
- },
- [2] = {
- .code = KEY_OPTION,
- .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
- .desc = "Function button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data netxbig_v2_button_data = {
- .buttons = netxbig_v2_buttons,
- .nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
-};
-
-static struct platform_device netxbig_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &netxbig_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int net2big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-static unsigned int net5big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP38_GPIO, /* SATA HDD3 presence */
- MPP39_GPIO, /* SATA HDD4 presence */
- MPP40_GPIO, /* SATA HDD5 presence */
- MPP41_GPIO, /* SATA HDD3 power */
- MPP42_GPIO, /* SATA HDD4 power */
- MPP43_GPIO, /* SATA HDD5 power */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-#define NETXBIG_V2_GPIO_POWER_OFF 7
-
-static void netxbig_v2_power_off(void)
-{
- gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netxbig_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- if (machine_is_net2big_v2())
- kirkwood_mpp_conf(net2big_v2_mpp_config);
- else
- kirkwood_mpp_conf(net5big_v2_mpp_config);
-
- if (machine_is_net2big_v2())
- lacie_v2_hdd_power_init(2);
- else
- lacie_v2_hdd_power_init(5);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&netxbig_v2_ge00_data);
- if (machine_is_net5big_v2())
- kirkwood_ge01_init(&netxbig_v2_ge01_data);
- kirkwood_sata_init(&netxbig_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- if (machine_is_net5big_v2())
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
- platform_device_register(&netxbig_v2_gpio_buttons);
-
- if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = netxbig_v2_power_off;
- else
- pr_err("netxbig_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NET2BIG_V2
-MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NET5BIG_V2
-MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
deleted file mode 100644
index e5cf84103583..000000000000
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd-setup.c
- *
- * Marvell OpenRD (Base|Client|Ultimate) Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data openrd_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(24),
-};
-
-static struct mv_sata_platform_data openrd_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
- .gpio_write_protect = -1,
-};
-
-static unsigned int openrd_mpp_config[] __initdata = {
- MPP12_SD_CLK,
- MPP13_SD_CMD,
- MPP14_SD_D0,
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP34_GPIO,
- 0
-};
-
-/* Configure MPP for UART1 */
-static unsigned int openrd_uart1_mpp_config[] __initdata = {
- MPP13_UART1_TXD,
- MPP14_UART1_RXD,
- 0
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("cs42l51", 0x4a),
- },
-};
-
-static struct platform_device openrd_client_audio_device = {
- .name = "openrd-client-audio",
- .id = -1,
-};
-
-static int __initdata uart1;
-
-static int __init sd_uart_selection(char *str)
-{
- uart1 = -EINVAL;
-
- /* Default is SD. Change if required, for UART */
- if (!str)
- return 0;
-
- if (!strncmp(str, "232", 3)) {
- uart1 = 232;
- } else if (!strncmp(str, "485", 3)) {
- /* OpenRD-Base doesn't have RS485. Treat is as an
- * unknown argument & just have default setting -
- * which is SD */
- if (machine_is_openrd_base()) {
- uart1 = -ENODEV;
- return 1;
- }
-
- uart1 = 485;
- }
- return 1;
-}
-/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
-__setup("kw_openrd_init_uart1=", sd_uart_selection);
-
-static int __init uart1_mpp_config(void)
-{
- kirkwood_mpp_conf(openrd_uart1_mpp_config);
-
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- return -EIO;
- }
-
- if (gpio_request(28, "RS232_RS485_SEL")) {
- pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
- gpio_free(34);
- return -EIO;
- }
-
- /* Select UART1
- * Pin # 34: 0 => UART1, 1 => SD */
- gpio_direction_output(34, 0);
-
- /* Select RS232 OR RS485
- * Pin # 28: 0 => RS232, 1 => RS485 */
- if (uart1 == 232)
- gpio_direction_output(28, 0);
- else
- gpio_direction_output(28, 1);
-
- gpio_free(34);
- gpio_free(28);
-
- return 0;
-}
-
-static void __init openrd_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
- 25);
-
- kirkwood_ehci_init();
-
- if (machine_is_openrd_ultimate()) {
- openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
-
- kirkwood_ge00_init(&openrd_ge00_data);
- if (!machine_is_openrd_base())
- kirkwood_ge01_init(&openrd_ge01_data);
-
- kirkwood_sata_init(&openrd_sata_data);
-
- kirkwood_i2c_init();
-
- if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
- platform_device_register(&openrd_client_audio_device);
- i2c_register_board_info(0, i2c_board_info,
- ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
- }
-
- if (uart1 <= 0) {
- if (uart1 < 0)
- pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
-
- /* Select SD
- * Pin # 34: 0 => UART1, 1 => SD */
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- } else {
-
- gpio_direction_output(34, 1);
- gpio_free(34);
- kirkwood_sdio_init(&openrd_mvsdio_data);
- }
- } else {
- if (!uart1_mpp_config())
- kirkwood_uart1_init();
- }
-}
-
-static int __init openrd_pci_init(void)
-{
- if (machine_is_openrd_base() ||
- machine_is_openrd_client() ||
- machine_is_openrd_ultimate())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(openrd_pci_init);
-
-#ifdef CONFIG_MACH_OPENRD_BASE
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_CLIENT
-MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_ULTIMATE
-MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
deleted file mode 100644
index 12d86f39f380..000000000000
--- a/arch/arm/mach-kirkwood/pcie.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/pcie.c
- *
- * PCIe functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/mbus.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
-#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
-#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
-#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
-
-static void kirkwood_enable_pcie_clk(const char *port)
-{
- struct clk *clk;
-
- clk = clk_get_sys("pcie", port);
- if (IS_ERR(clk)) {
- pr_err("PCIE clock %s missing\n", port);
- return;
- }
- clk_prepare_enable(clk);
- clk_put(clk);
-}
-
-/* This function is called very early in the boot when probing the
- hardware to determine what we actually are, and what rate tclk is
- ticking at. Hence calling kirkwood_enable_pcie_clk() is not
- possible since the clk tree has not been created yet. */
-void kirkwood_enable_pcie(void)
-{
- u32 curr = readl(CLOCK_GATING_CTRL);
- if (!(curr & CGC_PEX0))
- writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
-}
-
-void kirkwood_pcie_id(u32 *dev, u32 *rev)
-{
- kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
- *rev = orion_pcie_rev(PCIE_VIRT_BASE);
-}
-
-struct pcie_port {
- u8 root_bus_nr;
- void __iomem *base;
- spinlock_t conf_lock;
- int irq;
- struct resource res;
-};
-
-static int pcie_port_map[2];
-static int num_pcie_ports;
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
- /*
- * Don't go out when trying to access --
- * 1. nonexisting device on local bus
- * 2. where there's no device connected (no link)
- */
- if (bus == pp->root_bus_nr && dev == 0)
- return 1;
-
- if (!orion_pcie_link_up(pp->base))
- return 0;
-
- if (bus == pp->root_bus_nr && dev != 1)
- return 0;
-
- return 1;
-}
-
-
-/*
- * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static struct pci_ops pcie_ops = {
- .read = pcie_rd_conf,
- .write = pcie_wr_conf,
-};
-
-static void __init pcie0_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 0 MEM";
- pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static void __init pcie1_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE1_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE1;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 1 MEM";
- pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct pcie_port *pp;
- int index;
-
- if (nr >= num_pcie_ports)
- return 0;
-
- index = pcie_port_map[nr];
- pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
-
- pp = kzalloc(sizeof(*pp), GFP_KERNEL);
- if (!pp)
- panic("PCIe: failed to allocate pcie_port data");
- sys->private_data = pp;
- pp->root_bus_nr = sys->busnr;
- spin_lock_init(&pp->conf_lock);
-
- switch (index) {
- case 0:
- kirkwood_enable_pcie_clk("0");
- pcie0_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
- break;
- case 1:
- kirkwood_enable_pcie_clk("1");
- pcie1_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr,
- KIRKWOOD_PCIE1_IO_PHYS_BASE);
- break;
- default:
- panic("PCIe setup: invalid controller %d", index);
- }
-
- if (request_resource(&iomem_resource, &pp->res))
- panic("Request PCIe%d Memory resource failed\n", index);
-
- pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
-
- /*
- * Generic PCIe unit setup.
- */
- orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-
- orion_pcie_setup(pp->base);
-
- return 1;
-}
-
-/*
- * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
- * is operating as a root complex this needs to be switched to
- * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
- * the device. Decoding setup is handled by the orion code.
- */
-static void rc_pci_fixup(struct pci_dev *dev)
-{
- if (dev->bus->parent == NULL && dev->devfn == 0) {
- int i;
-
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- struct pcie_port *pp = sys->private_data;
-
- return pp->irq;
-}
-
-static struct hw_pci kirkwood_pci __initdata = {
- .setup = kirkwood_pcie_setup,
- .map_irq = kirkwood_pcie_map_irq,
- .ops = &pcie_ops,
-};
-
-static void __init add_pcie_port(int index, void __iomem *base)
-{
- pcie_port_map[num_pcie_ports++] = index;
- pr_info("Kirkwood PCIe port %d: link %s\n", index,
- orion_pcie_link_up(base) ? "up" : "down");
-}
-
-void __init kirkwood_pcie_init(unsigned int portmask)
-{
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
- KIRKWOOD_MBUS_PCIE0_IO_ATTR,
- KIRKWOOD_PCIE_IO_PHYS_BASE,
- KIRKWOOD_PCIE_IO_SIZE,
- KIRKWOOD_PCIE_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
- KIRKWOOD_PCIE_MEM_PHYS_BASE,
- KIRKWOOD_PCIE_MEM_SIZE);
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
- KIRKWOOD_MBUS_PCIE1_IO_ATTR,
- KIRKWOOD_PCIE1_IO_PHYS_BASE,
- KIRKWOOD_PCIE1_IO_SIZE,
- KIRKWOOD_PCIE1_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
- KIRKWOOD_PCIE1_MEM_PHYS_BASE,
- KIRKWOOD_PCIE1_MEM_SIZE);
-
- vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-
- if (portmask & KW_PCIE0)
- add_pcie_port(0, PCIE_VIRT_BASE);
-
- if (portmask & KW_PCIE1)
- add_pcie_port(1, PCIE1_VIRT_BASE);
-
- kirkwood_pci.nr_controllers = num_pcie_ports;
- pci_common_init(&kirkwood_pci);
-}
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
deleted file mode 100644
index 8e5e0329d04c..000000000000
--- a/arch/arm/mach-kirkwood/pm.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-static void __iomem *ddr_operation_base;
-static void __iomem *memory_pm_ctrl;
-
-static void kirkwood_low_power(void)
-{
- u32 mem_pm_ctrl;
-
- mem_pm_ctrl = readl(memory_pm_ctrl);
-
- /* Set peripherals to low-power mode */
- writel_relaxed(~0, memory_pm_ctrl);
-
- /* Set DDR in self-refresh */
- writel_relaxed(0x7, ddr_operation_base);
-
- /*
- * Set CPU in wait-for-interrupt state.
- * This disables the CPU core clocks,
- * the array clocks, and also the L2 controller.
- */
- cpu_do_idle();
-
- writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
-}
-
-static int kirkwood_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- kirkwood_low_power();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int kirkwood_pm_valid_standby(suspend_state_t state)
-{
- return state == PM_SUSPEND_STANDBY;
-}
-
-static const struct platform_suspend_ops kirkwood_suspend_ops = {
- .enter = kirkwood_suspend_enter,
- .valid = kirkwood_pm_valid_standby,
-};
-
-void __init kirkwood_pm_init(void)
-{
- ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
- memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
-
- suspend_set_ops(&kirkwood_suspend_ops);
-}
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
deleted file mode 100644
index 21e7530f368b..000000000000
--- a/arch/arm/mach-kirkwood/pm.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_KIRKWOOD_PM_H
-#define __ARCH_KIRKWOOD_PM_H
-
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
deleted file mode 100644
index e4fd3129d36f..000000000000
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
- *
- * Marvell RD-88F6192-NAS Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-
-#define RD88F6192_GPIO_USB_VBUS 10
-
-static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data rd88f6192_sata_data = {
- .n_ports = 2,
-};
-
-static const struct flash_platform_data rd88F6192_spi_slave_data = {
- .type = "m25p128",
-};
-
-static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &rd88F6192_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static void __init rd88f6192_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
-
- orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
- if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
- gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
- pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&rd88f6192_ge00_data);
- kirkwood_sata_init(&rd88f6192_sata_data);
- spi_register_board_info(rd88F6192_spi_slave_info,
- ARRAY_SIZE(rd88F6192_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6192_pci_init(void)
-{
- if (machine_is_rd88f6192_nas())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6192_pci_init);
-
-MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6192_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
deleted file mode 100644
index 5154bd2a3ad3..000000000000
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6281-setup.c
- *
- * Marvell RD-88F6281 Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition rd88f6281_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6281_switch_chip_data = {
- .port_names[0] = "lan1",
- .port_names[1] = "lan2",
- .port_names[2] = "lan3",
- .port_names[3] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data rd88f6281_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f6281_switch_chip_data,
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data rd88f6281_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
- .gpio_card_detect = 28,
- .gpio_write_protect = -1,
-};
-
-static unsigned int rd88f6281_mpp_config[] __initdata = {
- MPP28_GPIO,
- 0
-};
-
-static void __init rd88f6281_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(rd88f6281_mpp_config);
-
- kirkwood_nand_init(rd88f6281_nand_parts,
- ARRAY_SIZE(rd88f6281_nand_parts),
- 25);
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&rd88f6281_ge00_data);
- kirkwood_pcie_id(&dev, &rev);
- if (rev == MV88F6281_REV_A0) {
- rd88f6281_switch_chip_data.sw_addr = 10;
- kirkwood_ge01_init(&rd88f6281_ge01_data);
- } else {
- rd88f6281_switch_chip_data.port_names[4] = "wan";
- }
- kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
-
- kirkwood_sata_init(&rd88f6281_sata_data);
- kirkwood_sdio_init(&rd88f6281_mvsdio_data);
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6281_pci_init(void)
-{
- if (machine_is_rd88f6281())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6281_pci_init);
-
-MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6281_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
deleted file mode 100644
index 8736f8c97518..000000000000
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *
- * HP t5325 Thin Client setup
- *
- * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <sound/alc5623.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition hp_t5325_partitions[] = {
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_256K,
- },
- {
- .name = "permanent u-boot env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "HP env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- },
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "SSD firmware",
- .size = SZ_256K,
- .offset = SZ_512K,
- },
-};
-
-static const struct flash_platform_data hp_t5325_flash = {
- .type = "mx25l8005",
- .name = "spi_flash",
- .parts = hp_t5325_partitions,
- .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
-};
-
-static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &hp_t5325_flash,
- .irq = -1,
- },
-};
-
-static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data hp_t5325_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button hp_t5325_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = 45,
- .desc = "Power",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data hp_t5325_button_data = {
- .buttons = hp_t5325_buttons,
- .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
-};
-
-static struct platform_device hp_t5325_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &hp_t5325_button_data,
- }
-};
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-static unsigned int hp_t5325_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_SPI_SCn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_GPIO,
- MPP14_GPIO,
- MPP15_GPIO,
- MPP16_GPIO,
- MPP17_GPIO,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_GPIO,
- MPP21_GPIO,
- MPP22_GPIO,
- MPP23_GPIO,
- MPP32_GPIO,
- MPP33_GE1_TXCTL,
- MPP39_AU_I2SBCLK,
- MPP40_AU_I2SDO,
- MPP43_AU_I2SDI,
- MPP41_AU_I2SLRCLK,
- MPP42_AU_I2SMCLK,
- MPP45_GPIO, /* Power button */
- MPP48_GPIO, /* Board power off */
- 0
-};
-
-static struct alc5623_platform_data alc5621_data = {
- .add_ctrl = 0x3700,
- .jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("alc5621", 0x1a),
- .platform_data = &alc5621_data,
- },
-};
-
-#define HP_T5325_GPIO_POWER_OFF 48
-
-static void hp_t5325_power_off(void)
-{
- gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
-}
-
-static void __init hp_t5325_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(hp_t5325_mpp_config);
-
- kirkwood_uart0_init();
- spi_register_board_info(hp_t5325_spi_slave_info,
- ARRAY_SIZE(hp_t5325_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- kirkwood_ge00_init(&hp_t5325_ge00_data);
- kirkwood_sata_init(&hp_t5325_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&hp_t5325_button_device);
- platform_device_register(&hp_t5325_audio_device);
-
- i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
-
- if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = hp_t5325_power_off;
- else
- pr_err("t5325: failed to configure power-off GPIO\n");
-}
-
-static int __init hp_t5325_pci_init(void)
-{
- if (machine_is_t5325())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(hp_t5325_pci_init);
-
-MACHINE_START(T5325, "HP t5325 Thin Client")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = hp_t5325_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
deleted file mode 100644
index e1267d6b468f..000000000000
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup
- *
- * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts219_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 15,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 16,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts219_button_data = {
- .buttons = qnap_ts219_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
-};
-
-static struct platform_device qnap_ts219_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts219_button_data,
- }
-};
-
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_SATA1_ACTn,
- MPP5_SATA0_ACTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
- MPP16_GPIO, /* Reset button (on devices with 88F6281) */
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button (on devices with 88F6282) */
- MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
- MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
- 0
-};
-
-static void __init qnap_ts219_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
- qnap_ts219_buttons[1].gpio = 37; /* Reset button */
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- }
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_sata_init(&qnap_ts219_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts219_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
-}
-
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
-
-MACHINE_START(TS219, "QNAP TS-119/TS-219")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts219_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
deleted file mode 100644
index 81d585806b2f..000000000000
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
- *
- * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-/* for the PCIe reset workaround */
-#include <plat/pcie.h>
-
-
-#define QNAP_TS41X_JUMPER_JP1 45
-
-static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data qnap_ts41x_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts41x_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 43,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 37,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts41x_button_data = {
- .buttons = qnap_ts41x_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
-};
-
-static struct platform_device qnap_ts41x_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts41x_button_data,
- }
-};
-
-static unsigned int qnap_ts41x_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_PEX_RST_OUTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_SATA0_ACTn,
- MPP16_SATA1_ACTn,
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button */
- MPP43_GPIO, /* USB Copy button */
- MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
- MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */
- MPP46_GPIO, /* External SATA HDD1 error indicator */
- MPP47_GPIO, /* External SATA HDD2 error indicator */
- MPP48_GPIO, /* External SATA HDD3 error indicator */
- MPP49_GPIO, /* External SATA HDD4 error indicator */
- 0
-};
-
-static void __init qnap_ts41x_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts41x_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
- kirkwood_ge00_init(&qnap_ts41x_ge00_data);
- kirkwood_ge01_init(&qnap_ts41x_ge01_data);
-
- kirkwood_sata_init(&qnap_ts41x_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts41x_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
- if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
- gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
-}
-
-static int __init ts41x_pci_init(void)
-{
- if (machine_is_ts41x()) {
- u32 dev, rev;
-
- /*
- * Without this explicit reset, the PCIe SATA controller
- * (Marvell 88sx7042/sata_mv) is known to stop working
- * after a few minutes.
- */
- orion_pcie_reset(PCIE_VIRT_BASE);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
- else
- kirkwood_pcie_init(KW_PCIE0);
- }
- return 0;
-}
-subsys_initcall(ts41x_pci_init);
-
-MACHINE_START(TS41X, "QNAP TS-41x")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts41x_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
deleted file mode 100644
index cec87cef76ca..000000000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "tsx1x-common.h"
-
-/*
- * QNAP TS-x1x Boards flash
- */
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatibility with
- * the QNAP firmware.
- * Layout as used by QNAP:
- * 0x00000000-0x00080000 : "U-Boot"
- * 0x00200000-0x00400000 : "Kernel"
- * 0x00400000-0x00d00000 : "RootFS"
- * 0x00d00000-0x01000000 : "RootFS2"
- * 0x00080000-0x000c0000 : "U-Boot Config"
- * 0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_tsx1x_partitions[] = {
- {
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00200000,
- }, {
- .name = "RootFS1",
- .size = 0x00900000,
- .offset = 0x00400000,
- }, {
- .name = "RootFS2",
- .size = 0x00300000,
- .offset = 0x00d00000,
- }, {
- .name = "U-Boot Config",
- .size = 0x00040000,
- .offset = 0x00080000,
- }, {
- .name = "NAS Config",
- .size = 0x00140000,
- .offset = 0x000c0000,
- },
-};
-
-static const struct flash_platform_data qnap_tsx1x_flash = {
- .type = "m25p128",
- .name = "spi_flash",
- .parts = qnap_tsx1x_partitions,
- .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
-};
-
-static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &qnap_tsx1x_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init qnap_tsx1x_register_flash(void)
-{
- spi_register_board_info(qnap_tsx1x_spi_slave_info,
- ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
- kirkwood_spi_init();
-}
-
-
-/*****************************************************************************
- * QNAP TS-x1x specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_tsx1x_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack UART1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
deleted file mode 100644
index 7fa037361b55..000000000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
-#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-
-extern void __init qnap_tsx1x_register_flash(void);
-extern void qnap_tsx1x_power_off(void);
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index eda0dd0ab97b..f06c6aad75e8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -854,7 +854,7 @@ config OUTER_CACHE_SYNC
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
- depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
+ depends on ARCH_MV78XX0 || ARCH_MVEBU
default y
select OUTER_CACHE
help