summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig24
-rw-r--r--arch/arm/Kconfig.debug39
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi21
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi23
-rw-r--r--arch/arm/include/debug/tegra.S223
-rw-r--r--arch/arm/include/debug/zynq.S (renamed from arch/arm/mach-zynq/include/mach/debug-macro.S)23
-rw-r--r--arch/arm/mach-nomadik/Kconfig2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c10
-rw-r--r--arch/arm/mach-nomadik/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-tegra/Kconfig51
-rw-r--r--arch/arm/mach-tegra/common.c9
-rw-r--r--arch/arm/mach-tegra/include/mach/debug-macro.S100
-rw-r--r--arch/arm/mach-tegra/include/mach/irqs.h182
-rw-r--r--arch/arm/mach-tegra/include/mach/uncompress.h65
-rw-r--r--arch/arm/mach-tegra/io.c1
-rw-r--r--arch/arm/mach-tegra/iomap.h14
-rw-r--r--arch/arm/mach-tegra/irammap.h9
-rw-r--r--arch/arm/mach-tegra/pcie.c3
-rw-r--r--arch/arm/mach-tegra/timer.c78
-rw-r--r--arch/arm/mach-ux500/Kconfig2
-rw-r--r--arch/arm/mach-ux500/board-mop500-audio.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c3
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c3
-rw-r--r--arch/arm/mach-ux500/devices-common.c1
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c4
-rw-r--r--arch/arm/mach-ux500/devices-db8500.h1
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/msp.h2
-rw-r--r--arch/arm/mach-ux500/timer.c5
-rw-r--r--arch/arm/mach-ux500/usb.c4
-rw-r--r--arch/arm/mach-vt8500/Kconfig12
-rw-r--r--arch/arm/mach-vt8500/common.h3
-rw-r--r--arch/arm/mach-vt8500/include/mach/entry-macro.S26
-rw-r--r--arch/arm/mach-vt8500/include/mach/irqs.h22
-rw-r--r--arch/arm/mach-vt8500/irq.c108
-rw-r--r--arch/arm/mach-vt8500/vt8500.c1
-rw-r--r--arch/arm/mach-zynq/Kconfig13
-rw-r--r--arch/arm/mach-zynq/common.c38
-rw-r--r--arch/arm/mach-zynq/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-zynq/include/mach/irqs.h21
-rw-r--r--arch/arm/mach-zynq/include/mach/timex.h23
-rw-r--r--arch/arm/mach-zynq/include/mach/uart.h25
-rw-r--r--arch/arm/mach-zynq/include/mach/uncompress.h51
-rw-r--r--arch/arm/mach-zynq/include/mach/zynq_soc.h53
-rw-r--r--arch/arm/mach-zynq/timer.c1
-rw-r--r--arch/arm/plat-nomadik/Kconfig29
-rw-r--r--arch/arm/plat-nomadik/Makefile5
-rw-r--r--arch/arm/plat-nomadik/include/plat/mtu.h9
-rw-r--r--arch/arm/plat-nomadik/include/plat/ste_dma40.h223
-rw-r--r--arch/arm/plat-nomadik/timer.c223
52 files changed, 534 insertions, 1282 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bb60c8adbff..2277f9530b00 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -650,6 +650,7 @@ config ARCH_TEGRA
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select SPARSE_IRQ
select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -891,6 +892,7 @@ config ARCH_U8500
select GENERIC_CLOCKEVENTS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select SPARSE_IRQ
help
Support for ST-Ericsson's Ux500 architecture
@@ -905,6 +907,7 @@ config ARCH_NOMADIK
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_STN8815
+ select SPARSE_IRQ
help
Support for the Nomadik platform by ST-Ericsson
@@ -948,7 +951,7 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1/2/3/4).
-config ARCH_VT8500
+config ARCH_VT8500_SINGLE
bool "VIA/WonderMedia 85xx"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
@@ -958,22 +961,12 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
select USE_OF
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
-config ARCH_ZYNQ
- bool "Xilinx Zynq ARM Cortex A9 Platform"
- select ARM_AMBA
- select ARM_GIC
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select ICST
- select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
- help
- Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
menu "Multiple platform selection"
@@ -1074,7 +1067,6 @@ source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/plat-omap/Kconfig"
@@ -1137,8 +1129,12 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
+source "arch/arm/mach-vt8500/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-zynq/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 512b39438548..661030d6bc6c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -379,6 +379,13 @@ choice
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
+ config DEBUG_TEGRA_UART
+ depends on ARCH_TEGRA
+ bool "Use Tegra UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -452,6 +459,36 @@ config DEBUG_IMX6Q_UART_PORT
Choose UART port on which kernel low-level debug messages
should be output.
+choice
+ prompt "Low-level debug console UART"
+ depends on DEBUG_LL && DEBUG_TEGRA_UART
+
+ config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Via ODMDATA"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the ODMDATA value. This value is part of the BCT, and is written
+ to the boot memory device using nvflash, or other flashing tool.
+ When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+ 0/1/2/3/4 are UART A/B/C/D/E.
+
+ config TEGRA_DEBUG_UARTA
+ bool "UART A"
+
+ config TEGRA_DEBUG_UARTB
+ bool "UART B"
+
+ config TEGRA_DEBUG_UARTC
+ bool "UART C"
+
+ config TEGRA_DEBUG_UARTD
+ bool "UART D"
+
+ config TEGRA_DEBUG_UARTE
+ bool "UART E"
+
+endchoice
+
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
@@ -469,6 +506,8 @@ config DEBUG_LL_INCLUDE
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+ default "debug/tegra.S" if DEBUG_TEGRA_UART
+ default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9c60f474a559..30c443c406f3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -202,7 +202,6 @@ machine-$(CONFIG_ARCH_SUNXI) += sunxi
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_PLAT_IOP) += iop
-plat-$(CONFIG_PLAT_NOMADIK) += nomadik
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index fba998e3954a..b8effa1cbda7 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -91,6 +91,12 @@
};
};
+ timer@50004600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x50040600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@@ -108,6 +114,15 @@
#interrupt-cells = <3>;
};
+ timer@60005000 {
+ compatible = "nvidia,tegra20-timer";
+ reg = <0x60005000 0x60>;
+ interrupts = <0 0 0x04
+ 0 1 0x04
+ 0 41 0x04
+ 0 42 0x04>;
+ };
+
apbdma: dma {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
@@ -225,6 +240,12 @@
#pwm-cells = <2>;
};
+ rtc {
+ compatible = "nvidia,tegra20-rtc";
+ reg = <0x7000e000 0x100>;
+ interrupts = <0 2 0x04>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index efa603d47a6a..529fdb82dfdb 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -91,6 +91,12 @@
};
};
+ timer@50004600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x50040600 0x20>;
+ interrupts = <1 13 0xf04>;
+ };
+
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@@ -108,6 +114,17 @@
#interrupt-cells = <3>;
};
+ timer@60005000 {
+ compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+ reg = <0x60005000 0x400>;
+ interrupts = <0 0 0x04
+ 0 1 0x04
+ 0 41 0x04
+ 0 42 0x04
+ 0 121 0x04
+ 0 122 0x04>;
+ };
+
apbdma: dma {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
@@ -219,6 +236,12 @@
#pwm-cells = <2>;
};
+ rtc {
+ compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+ reg = <0x7000e000 0x100>;
+ interrupts = <0 2 0x04>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
new file mode 100644
index 000000000000..883d7c22fd9d
--- /dev/null
+++ b/arch/arm/include/debug/tegra.S
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
+ *
+ * Author:
+ * Colin Cross <ccross@google.com>
+ * Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_SHIFT 2
+
+/* Physical addresses */
+#define TEGRA_CLK_RESET_BASE 0x60006000
+#define TEGRA_APB_MISC_BASE 0x70000000
+#define TEGRA_UARTA_BASE 0x70006000
+#define TEGRA_UARTB_BASE 0x70006040
+#define TEGRA_UARTC_BASE 0x70006200
+#define TEGRA_UARTD_BASE 0x70006300
+#define TEGRA_UARTE_BASE 0x70006400
+#define TEGRA_PMC_BASE 0x7000e400
+
+#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04)
+#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08)
+#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c)
+#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10)
+#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14)
+#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18)
+#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0)
+#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804)
+
+/*
+ * Must be 1MB-aligned since a 1MB mapping is used early on.
+ * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
+ */
+#define UART_VIRTUAL_BASE 0xfe100000
+
+#define checkuart(rp, rv, lhu, bit, uart) \
+ /* Load address of CLK_RST register */ \
+ movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
+ movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+ /* Load value from CLK_RST register */ \
+ ldr rp, [rp, #0] ; \
+ /* Test UART's reset bit */ \
+ tst rp, #(1 << bit) ; \
+ /* If set, can't use UART; jump to save no UART */ \
+ bne 90f ; \
+ /* Load address of CLK_OUT_ENB register */ \
+ movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
+ movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+ /* Load value from CLK_OUT_ENB register */ \
+ ldr rp, [rp, #0] ; \
+ /* Test UART's clock enable bit */ \
+ tst rp, #(1 << bit) ; \
+ /* If clear, can't use UART; jump to save no UART */ \
+ beq 90f ; \
+ /* Passed all tests, load address of UART registers */ \
+ movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
+ movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+ /* Jump to save UART address */ \
+ b 91f
+
+ .macro addruart, rp, rv, tmp
+ adr \rp, 99f @ actual addr of 99f
+ ldr \rv, [\rp] @ linked addr is stored there
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ linked tegra_uart_config
+ sub \tmp, \rp, \rv @ actual tegra_uart_config
+ ldr \rp, [\tmp] @ Load tegra_uart_config
+ cmp \rp, #1 @ needs initialization?
+ bne 100f @ no; go load the addresses
+ mov \rv, #0 @ yes; record init is done
+ str \rv, [\tmp]
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+ /* Check ODMDATA */
+10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff
+ movt \rp, #TEGRA_PMC_SCRATCH20 >> 16
+ ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20
+ ubfx \rv, \rp, #18, #2 @ 19:18 are console type
+ cmp \rv, #2 @ 2 and 3 mean DCC, UART
+ beq 11f @ some boards swap the meaning
+ cmp \rv, #3 @ so accept either
+ bne 90f
+11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID
+ cmp \rv, #0 @ UART 0?
+ beq 20f
+ cmp \rv, #1 @ UART 1?
+ beq 21f
+ cmp \rv, #2 @ UART 2?
+ beq 22f
+ cmp \rv, #3 @ UART 3?
+ beq 23f
+ cmp \rv, #4 @ UART 4?
+ beq 24f
+ b 90f @ invalid
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \
+ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ /* Check UART A validity */
+20: checkuart(\rp, \rv, L, 6, A)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \
+ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ /* Check UART B validity */
+21: checkuart(\rp, \rv, L, 7, B)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \
+ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ /* Check UART C validity */
+22: checkuart(\rp, \rv, H, 23, C)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \
+ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ /* Check UART D validity */
+23: checkuart(\rp, \rv, U, 1, D)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \
+ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ /* Check UART E validity */
+24:
+ checkuart(\rp, \rv, U, 2, E)
+#endif
+
+ /* No valid UART found */
+90: mov \rp, #0
+ /* fall through */
+
+ /* Record whichever UART we chose */
+91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys
+ cmp \rp, #0 @ Valid UART address?
+ bne 92f @ Yes, go process it
+ str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt
+ b 100f @ Done
+92: and \rv, \rp, #0xffffff @ offset within 1MB section
+ add \rv, \rv, #UART_VIRTUAL_BASE
+ str \rv, [\tmp, #8] @ Store in tegra_uart_virt
+ movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff
+ movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16
+ ldr \rv, [\rv, #0] @ Load HIDREV
+ ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version
+ cmp \rv, #0x20 @ Tegra20?
+ moveq \rv, #0x75 @ Tegra20 divisor
+ movne \rv, #0xdd @ Tegra30 divisor
+ str \rv, [\tmp, #12] @ Save divisor to scratch
+ /* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */
+ mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB
+ str \rv, [\rp, #UART_LCR << UART_SHIFT]
+ /* uart[UART_DLL] = div & 0xff; */
+ ldr \rv, [\tmp, #12]
+ and \rv, \rv, #0xff
+ str \rv, [\rp, #UART_DLL << UART_SHIFT]
+ /* uart[UART_DLM] = div >> 8; */
+ ldr \rv, [\tmp, #12]
+ lsr \rv, \rv, #8
+ str \rv, [\rp, #UART_DLM << UART_SHIFT]
+ /* uart[UART_LCR] = UART_LCR_WLEN8; */
+ mov \rv, #UART_LCR_WLEN8
+ str \rv, [\rp, #UART_LCR << UART_SHIFT]
+ b 100f
+
+ .align
+99: .word .
+ .word tegra_uart_config
+ .ltorg
+
+ /* Load previously selected UART address */
+100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
+ ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
+ .endm
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that the UART address is actually valid.
+ */
+
+ .macro senduart, rd, rx
+ cmp \rx, #0
+ strneb \rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+ .endm
+
+ .macro busyuart, rd, rx
+ cmp \rx, #0
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1001b
+1002:
+ .endm
+
+ .macro waituart, rd, rx
+#ifdef FLOW_CONTROL
+ cmp \rx, #0
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+1002:
+#endif
+ .endm
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/include/debug/zynq.S
index 3ab0be1f6191..f9aa9740a73f 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/zynq.S
@@ -1,5 +1,4 @@
-/* arch/arm/mach-zynq/include/mach/debug-macro.S
- *
+/*
* Debugging macro include header
*
* Copyright (C) 2011 Xilinx
@@ -13,9 +12,25 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
+#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
+#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
+
+#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
+
+#define UART0_PHYS 0xE0000000
+#define UART1_PHYS 0xE0001000
+#define UART_SIZE SZ_4K
+#define UART_VIRT 0xF0001000
+
+#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
+# define LL_UART_PADDR UART1_PHYS
+#else
+# define LL_UART_PADDR UART0_PHYS
+#endif
-#include <mach/zynq_soc.h>
-#include <mach/uart.h>
+#define LL_UART_VADDR UART_VIRT
.macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index c744946ef022..706dc5727bbe 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,7 +4,7 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select HAS_MTU
+ select CLKSRC_NOMADIK_MTU
select NOMADIK_8815
endmenu
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 22ef8a1abe08..5ccdf53c5a9d 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,18 +25,16 @@
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-
-#include <plat/mtu.h>
-
-#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
+#include <mach/irqs.h>
#include "cpu-8815.h"
@@ -260,7 +258,7 @@ static void __init nomadik_timer_init(void)
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
- nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
+ nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
}
static struct sys_timer nomadik_timer = {
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index a118e615f865..b549d0571548 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -72,7 +72,7 @@
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
-#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
#define VIC_REG_IRQSR0 0
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 9ff6f6ea3617..e426d1b7747e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -57,57 +57,6 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
perfomance parameters(priority, prefech size).
-choice
- prompt "Default low-level debug console UART"
- default TEGRA_DEBUG_UART_NONE
-
-config TEGRA_DEBUG_UART_NONE
- bool "None"
-
-config TEGRA_DEBUG_UARTA
- bool "UART-A"
-
-config TEGRA_DEBUG_UARTB
- bool "UART-B"
-
-config TEGRA_DEBUG_UARTC
- bool "UART-C"
-
-config TEGRA_DEBUG_UARTD
- bool "UART-D"
-
-config TEGRA_DEBUG_UARTE
- bool "UART-E"
-
-endchoice
-
-choice
- prompt "Automatic low-level debug console UART"
- default TEGRA_DEBUG_UART_AUTO_NONE
-
-config TEGRA_DEBUG_UART_AUTO_NONE
- bool "None"
-
-config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
-
-config TEGRA_DEBUG_UART_AUTO_SCRATCH
- bool "Via UART scratch register"
- help
- Automatically determines which UART to use for low-level debug based
- on the UART scratch register value. Some bootloaders put ASCII 'D'
- in this register when they initialize their own console UART output.
- Using this option allows the kernel to automatically pick the same
- UART.
-
-endchoice
-
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 11a74db51e5d..0816562725f6 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -45,14 +45,15 @@
* kernel is loaded. The data is declared here rather than debug-macro.S so
* that multiple inclusions of debug-macro.S point at the same data.
*/
-#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
-u32 tegra_uart_config[3] = {
+u32 tegra_uart_config[4] = {
/* Debug UART initialization required */
1,
/* Debug UART physical address */
- (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
+ 0,
/* Debug UART virtual address */
- (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
+ 0,
+ /* Scratch space for debug macro */
+ 0,
};
#ifdef CONFIG_OF
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
deleted file mode 100644
index 44ca7b1d8b8a..000000000000
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/debug-macro.S
- *
- * Copyright (C) 2010,2011 Google, Inc.
- * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- * Doug Anderson <dianders@chromium.org>
- * Stephen Warren <swarren@nvidia.com>
- *
- * Portions based on mach-omap2's debug-macro.S
- * Copyright (C) 1994-1999 Russell King
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#include "../../iomap.h"
-#include "../../irammap.h"
-
- .macro addruart, rp, rv, tmp
- adr \rp, 99f @ actual addr of 99f
- ldr \rv, [\rp] @ linked addr is stored there
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ linked tegra_uart_config
- sub \tmp, \rp, \rv @ actual tegra_uart_config
- ldr \rp, [\tmp] @ Load tegra_uart_config
- cmp \rp, #1 @ needs intitialization?
- bne 100f @ no; go load the addresses
- mov \rv, #0 @ yes; record init is done
- str \rv, [\tmp]
- mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
- ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
- movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
- movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
- cmp \rv, \rp @ Cookie present?
- bne 100f @ No, use default UART
- mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
- ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
- str \rv, [\tmp, #4] @ Store in tegra_uart_phys
- sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
- add \rv, \rv, #IO_APB_VIRT
- str \rv, [\tmp, #8] @ Store in tegra_uart_virt
- b 100f
-
- .align
-99: .word .
- .word tegra_uart_config
- .ltorg
-
-100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
- ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
- .endm
-
-#define UART_SHIFT 2
-
-/*
- * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
- * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
- * We use the fact that all 5 valid UART addresses all have something in the
- * 2nd-to-lowest byte.
- */
-
- .macro senduart, rd, rx
- tst \rx, #0x0000ff00
- strneb \rd, [\rx, #UART_TX << UART_SHIFT]
-1001:
- .endm
-
- .macro busyuart, rd, rx
- tst \rx, #0x0000ff00
- beq 1002f
-1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1001b
-1002:
- .endm
-
- .macro waituart, rd, rx
-#ifdef FLOW_CONTROL
- tst \rx, #0x0000ff00
- beq 1002f
-1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
- tst \rd, #UART_MSR_CTS
- beq 1001b
-1002:
-#endif
- .endm
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
deleted file mode 100644
index aad1a2c1d714..000000000000
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/irqs.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IRQS_H
-#define __MACH_TEGRA_IRQS_H
-
-#define INT_GIC_BASE 0
-
-#define IRQ_LOCALTIMER 29
-
-/* Primary Interrupt Controller */
-#define INT_PRI_BASE (INT_GIC_BASE + 32)
-#define INT_TMR1 (INT_PRI_BASE + 0)
-#define INT_TMR2 (INT_PRI_BASE + 1)
-#define INT_RTC (INT_PRI_BASE + 2)
-#define INT_I2S2 (INT_PRI_BASE + 3)
-#define INT_SHR_SEM_INBOX_IBF (INT_PRI_BASE + 4)
-#define INT_SHR_SEM_INBOX_IBE (INT_PRI_BASE + 5)
-#define INT_SHR_SEM_OUTBOX_IBF (INT_PRI_BASE + 6)
-#define INT_SHR_SEM_OUTBOX_IBE (INT_PRI_BASE + 7)
-#define INT_VDE_UCQ_ERROR (INT_PRI_BASE + 8)
-#define INT_VDE_SYNC_TOKEN (INT_PRI_BASE + 9)
-#define INT_VDE_BSE_V (INT_PRI_BASE + 10)
-#define INT_VDE_BSE_A (INT_PRI_BASE + 11)
-#define INT_VDE_SXE (INT_PRI_BASE + 12)
-#define INT_I2S1 (INT_PRI_BASE + 13)
-#define INT_SDMMC1 (INT_PRI_BASE + 14)
-#define INT_SDMMC2 (INT_PRI_BASE + 15)
-#define INT_XIO (INT_PRI_BASE + 16)
-#define INT_VDE (INT_PRI_BASE + 17)
-#define INT_AVP_UCQ (INT_PRI_BASE + 18)
-#define INT_SDMMC3 (INT_PRI_BASE + 19)
-#define INT_USB (INT_PRI_BASE + 20)
-#define INT_USB2 (INT_PRI_BASE + 21)
-#define INT_PRI_RES_22 (INT_PRI_BASE + 22)
-#define INT_EIDE (INT_PRI_BASE + 23)
-#define INT_NANDFLASH (INT_PRI_BASE + 24)
-#define INT_VCP (INT_PRI_BASE + 25)
-#define INT_APB_DMA (INT_PRI_BASE + 26)
-#define INT_AHB_DMA (INT_PRI_BASE + 27)
-#define INT_GNT_0 (INT_PRI_BASE + 28)
-#define INT_GNT_1 (INT_PRI_BASE + 29)
-#define INT_OWR (INT_PRI_BASE + 30)
-#define INT_SDMMC4 (INT_PRI_BASE + 31)
-
-/* Secondary Interrupt Controller */
-#define INT_SEC_BASE (INT_PRI_BASE + 32)
-#define INT_GPIO1 (INT_SEC_BASE + 0)
-#define INT_GPIO2 (INT_SEC_BASE + 1)
-#define INT_GPIO3 (INT_SEC_BASE + 2)
-#define INT_GPIO4 (INT_SEC_BASE + 3)
-#define INT_UARTA (INT_SEC_BASE + 4)
-#define INT_UARTB (INT_SEC_BASE + 5)
-#define INT_I2C (INT_SEC_BASE + 6)
-#define INT_SPI (INT_SEC_BASE + 7)
-#define INT_TWC (INT_SEC_BASE + 8)
-#define INT_TMR3 (INT_SEC_BASE + 9)
-#define INT_TMR4 (INT_SEC_BASE + 10)
-#define INT_FLOW_RSM0 (INT_SEC_BASE + 11)
-#define INT_FLOW_RSM1 (INT_SEC_BASE + 12)
-#define INT_SPDIF (INT_SEC_BASE + 13)
-#define INT_UARTC (INT_SEC_BASE + 14)
-#define INT_MIPI (INT_SEC_BASE + 15)
-#define INT_EVENTA (INT_SEC_BASE + 16)
-#define INT_EVENTB (INT_SEC_BASE + 17)
-#define INT_EVENTC (INT_SEC_BASE + 18)
-#define INT_EVENTD (INT_SEC_BASE + 19)
-#define INT_VFIR (INT_SEC_BASE + 20)
-#define INT_DVC (INT_SEC_BASE + 21)
-#define INT_SYS_STATS_MON (INT_SEC_BASE + 22)
-#define INT_GPIO5 (INT_SEC_BASE + 23)
-#define INT_CPU0_PMU_INTR (INT_SEC_BASE + 24)
-#define INT_CPU1_PMU_INTR (INT_SEC_BASE + 25)
-#define INT_SEC_RES_26 (INT_SEC_BASE + 26)
-#define INT_S_LINK1 (INT_SEC_BASE + 27)
-#define INT_APB_DMA_COP (INT_SEC_BASE + 28)
-#define INT_AHB_DMA_COP (INT_SEC_BASE + 29)
-#define INT_DMA_TX (INT_SEC_BASE + 30)
-#define INT_DMA_RX (INT_SEC_BASE + 31)
-
-/* Tertiary Interrupt Controller */
-#define INT_TRI_BASE (INT_SEC_BASE + 32)
-#define INT_HOST1X_COP_SYNCPT (INT_TRI_BASE + 0)
-#define INT_HOST1X_MPCORE_SYNCPT (INT_TRI_BASE + 1)
-#define INT_HOST1X_COP_GENERAL (INT_TRI_BASE + 2)
-#define INT_HOST1X_MPCORE_GENERAL (INT_TRI_BASE + 3)
-#define INT_MPE_GENERAL (INT_TRI_BASE + 4)
-#define INT_VI_GENERAL (INT_TRI_BASE + 5)
-#define INT_EPP_GENERAL (INT_TRI_BASE + 6)
-#define INT_ISP_GENERAL (INT_TRI_BASE + 7)
-#define INT_2D_GENERAL (INT_TRI_BASE + 8)
-#define INT_DISPLAY_GENERAL (INT_TRI_BASE + 9)
-#define INT_DISPLAY_B_GENERAL (INT_TRI_BASE + 10)
-#define INT_HDMI (INT_TRI_BASE + 11)
-#define INT_TVO_GENERAL (INT_TRI_BASE + 12)
-#define INT_MC_GENERAL (INT_TRI_BASE + 13)
-#define INT_EMC_GENERAL (INT_TRI_BASE + 14)
-#define INT_TRI_RES_15 (INT_TRI_BASE + 15)
-#define INT_TRI_RES_16 (INT_TRI_BASE + 16)
-#define INT_AC97 (INT_TRI_BASE + 17)
-#define INT_SPI_2 (INT_TRI_BASE + 18)
-#define INT_SPI_3 (INT_TRI_BASE + 19)
-#define INT_I2C2 (INT_TRI_BASE + 20)
-#define INT_KBC (INT_TRI_BASE + 21)
-#define INT_EXTERNAL_PMU (INT_TRI_BASE + 22)
-#define INT_GPIO6 (INT_TRI_BASE + 23)
-#define INT_TVDAC (INT_TRI_BASE + 24)
-#define INT_GPIO7 (INT_TRI_BASE + 25)
-#define INT_UARTD (INT_TRI_BASE + 26)
-#define INT_UARTE (INT_TRI_BASE + 27)
-#define INT_I2C3 (INT_TRI_BASE + 28)
-#define INT_SPI_4 (INT_TRI_BASE + 29)
-#define INT_TRI_RES_30 (INT_TRI_BASE + 30)
-#define INT_SW_RESERVED (INT_TRI_BASE + 31)
-
-/* Quaternary Interrupt Controller */
-#define INT_QUAD_BASE (INT_TRI_BASE + 32)
-#define INT_SNOR (INT_QUAD_BASE + 0)
-#define INT_USB3 (INT_QUAD_BASE + 1)
-#define INT_PCIE_INTR (INT_QUAD_BASE + 2)
-#define INT_PCIE_MSI (INT_QUAD_BASE + 3)
-#define INT_QUAD_RES_4 (INT_QUAD_BASE + 4)
-#define INT_QUAD_RES_5 (INT_QUAD_BASE + 5)
-#define INT_QUAD_RES_6 (INT_QUAD_BASE + 6)
-#define INT_QUAD_RES_7 (INT_QUAD_BASE + 7)
-#define INT_APB_DMA_CH0 (INT_QUAD_BASE + 8)
-#define INT_APB_DMA_CH1 (INT_QUAD_BASE + 9)
-#define INT_APB_DMA_CH2 (INT_QUAD_BASE + 10)
-#define INT_APB_DMA_CH3 (INT_QUAD_BASE + 11)
-#define INT_APB_DMA_CH4 (INT_QUAD_BASE + 12)
-#define INT_APB_DMA_CH5 (INT_QUAD_BASE + 13)
-#define INT_APB_DMA_CH6 (INT_QUAD_BASE + 14)
-#define INT_APB_DMA_CH7 (INT_QUAD_BASE + 15)
-#define INT_APB_DMA_CH8 (INT_QUAD_BASE + 16)
-#define INT_APB_DMA_CH9 (INT_QUAD_BASE + 17)
-#define INT_APB_DMA_CH10 (INT_QUAD_BASE + 18)
-#define INT_APB_DMA_CH11 (INT_QUAD_BASE + 19)
-#define INT_APB_DMA_CH12 (INT_QUAD_BASE + 20)
-#define INT_APB_DMA_CH13 (INT_QUAD_BASE + 21)
-#define INT_APB_DMA_CH14 (INT_QUAD_BASE + 22)
-#define INT_APB_DMA_CH15 (INT_QUAD_BASE + 23)
-#define INT_QUAD_RES_24 (INT_QUAD_BASE + 24)
-#define INT_QUAD_RES_25 (INT_QUAD_BASE + 25)
-#define INT_QUAD_RES_26 (INT_QUAD_BASE + 26)
-#define INT_QUAD_RES_27 (INT_QUAD_BASE + 27)
-#define INT_QUAD_RES_28 (INT_QUAD_BASE + 28)
-#define INT_QUAD_RES_29 (INT_QUAD_BASE + 29)
-#define INT_QUAD_RES_30 (INT_QUAD_BASE + 30)
-#define INT_QUAD_RES_31 (INT_QUAD_BASE + 31)
-
-/* Tegra30 has 5 banks of 32 IRQs */
-#define INT_MAIN_NR (32 * 5)
-#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR)
-
-/* Tegra30 has 8 banks of 32 GPIOs */
-#define INT_GPIO_NR (32 * 8)
-
-#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR)
-
-#define INT_BOARD_BASE TEGRA_NR_IRQS
-#define NR_BOARD_IRQS 32
-
-#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS)
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 27725750ca3e..485003f9b636 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -29,7 +29,6 @@
#include <linux/serial_reg.h>
#include "../../iomap.h"
-#include "../../irammap.h"
#define BIT(x) (1 << (x))
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
@@ -52,17 +51,6 @@ static inline void flush(void)
{
}
-static inline void save_uart_address(void)
-{
- u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
-
- if (uart) {
- buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
- buf[1] = (u32)uart;
- } else
- buf[0] = 0;
-}
-
static const struct {
u32 base;
u32 reset_reg;
@@ -139,51 +127,19 @@ int auto_odmdata(void)
}
#endif
-#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
-int auto_scratch(void)
-{
- int i;
-
- /*
- * Look for the first UART that:
- * a) Is not in reset.
- * b) Is clocked.
- * c) Has a 'D' in the scratchpad register.
- *
- * Note that on Tegra30, the first two conditions are required, since
- * if not true, accesses to the UART scratch register will hang.
- * Tegra20 doesn't have this issue.
- *
- * The intent is that the bootloader will tell the kernel which UART
- * to use by setting up those conditions. If nothing found, we'll fall
- * back to what's specified in TEGRA_DEBUG_UART_BASE.
- */
- for (i = 0; i < ARRAY_SIZE(uarts); i++) {
- if (!uart_clocked(i))
- continue;
-
- uart = (volatile u8 *)uarts[i].base;
- if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
- continue;
-
- return i;
- }
-
- return -1;
-}
-#endif
-
/*
* Setup before decompression. This is where we do UART selection for
* earlyprintk and init the uart_base register.
*/
static inline void arch_decomp_setup(void)
{
- int uart_id, auto_uart_id;
+ int uart_id;
volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
u32 chip, div;
-#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
uart_id = 0;
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
uart_id = 1;
@@ -193,19 +149,7 @@ static inline void arch_decomp_setup(void)
uart_id = 3;
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
uart_id = 4;
-#else
- uart_id = -1;
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- auto_uart_id = auto_odmdata();
-#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
- auto_uart_id = auto_scratch();
-#else
- auto_uart_id = -1;
#endif
- if (auto_uart_id != -1)
- uart_id = auto_uart_id;
if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
!uart_clocked(uart_id))
@@ -213,7 +157,6 @@ static inline void arch_decomp_setup(void)
else
uart = (volatile u8 *)uarts[uart_id].base;
- save_uart_address();
if (uart == NULL)
return;
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 7d09f301b3a1..bb9c9c29d181 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -59,5 +59,6 @@ static struct map_desc tegra_io_desc[] __initdata = {
void __init tegra_map_common_io(void)
{
+ debug_ll_io_init();
iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
}
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 53151030a07d..db8be51cad80 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -261,20 +261,6 @@
#define TEGRA_SDMMC4_BASE 0xC8000600
#define TEGRA_SDMMC4_SIZE SZ_512
-#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
-# define TEGRA_DEBUG_UART_BASE 0
-#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE
-#endif
-
/* On TEGRA, many peripherals are very closely packed in
* two 256MB io windows (that actually only use about 64KB
* at the start of each).
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
index 0cbe63261854..501952a84344 100644
--- a/arch/arm/mach-tegra/irammap.h
+++ b/arch/arm/mach-tegra/irammap.h
@@ -23,13 +23,4 @@
#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
-/*
- * These locations are written to by uncompress.h, and read by debug-macro.S.
- * The first word holds the cookie value if the data is valid. The second
- * word holds the UART physical address.
- */
-#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K
-#define TEGRA_IRAM_DEBUG_UART_SIZE 8
-#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254
-
#endif
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index f18fc3ab4e58..53d085871798 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -43,6 +43,9 @@
#include "board.h"
#include "iomap.h"
+/* Hack - need to parse this from DT */
+#define INT_PCIE_INTR 130
+
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 6ff503536512..e4863f3e9ee7 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -26,16 +26,14 @@
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include <mach/irqs.h>
-
#include "board.h"
-#include "clock.h"
-#include "iomap.h"
#define RTC_SECONDS 0x08
#define RTC_SHADOW_SECONDS 0x0c
@@ -53,8 +51,8 @@
#define TIMER_PTV 0x0
#define TIMER_PCR 0x4
-static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE);
-static void __iomem *rtc_base = IO_ADDRESS(TEGRA_RTC_BASE);
+static void __iomem *timer_reg_base;
+static void __iomem *rtc_base;
static struct timespec persistent_ts;
static u64 persistent_ms, last_persistent_ms;
@@ -158,40 +156,66 @@ static struct irqaction tegra_timer_irq = {
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
.handler = tegra_timer_interrupt,
.dev_id = &tegra_clockevent,
- .irq = INT_TMR3,
};
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- TEGRA_ARM_PERIF_BASE + 0x600,
- IRQ_LOCALTIMER);
+static const struct of_device_id timer_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-timer" },
+ {}
+};
-static void __init tegra_twd_init(void)
-{
- int err = twd_local_timer_register(&twd_local_timer);
- if (err)
- pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define tegra_twd_init() do {} while(0)
-#endif
+static const struct of_device_id rtc_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-rtc" },
+ {}
+};
static void __init tegra_init_timer(void)
{
+ struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
+ np = of_find_matching_node(NULL, timer_match);
+ if (!np) {
+ pr_err("Failed to find timer DT node\n");
+ BUG();
+ }
+
+ timer_reg_base = of_iomap(np, 0);
+ if (!timer_reg_base) {
+ pr_err("Can't map timer registers");
+ BUG();
+ }
+
+ tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
+ if (tegra_timer_irq.irq <= 0) {
+ pr_err("Failed to map timer IRQ\n");
+ BUG();
+ }
+
clk = clk_get_sys("timer", NULL);
if (IS_ERR(clk)) {
- pr_warn("Unable to get timer clock."
- " Assuming 12Mhz input clock.\n");
+ pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
rate = 12000000;
} else {
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
}
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, rtc_match);
+ if (!np) {
+ pr_err("Failed to find RTC DT node\n");
+ BUG();
+ }
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
/*
* rtc registers are used by read_persistent_clock, keep the rtc clock
* enabled
@@ -202,6 +226,8 @@ static void __init tegra_init_timer(void)
else
clk_prepare_enable(clk);
+ of_node_put(np);
+
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -223,13 +249,13 @@ static void __init tegra_init_timer(void)
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
- printk(KERN_ERR "Failed to register clocksource\n");
+ pr_err("Failed to register clocksource\n");
BUG();
}
ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
if (ret) {
- printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret);
+ pr_err("Failed to register timer IRQ: %d\n", ret);
BUG();
}
@@ -241,7 +267,9 @@ static void __init tegra_init_timer(void)
tegra_clockevent.cpumask = cpu_all_mask;
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_register_device(&tegra_clockevent);
- tegra_twd_init();
+#ifdef CONFIG_HAVE_ARM_TWD
+ twd_local_timer_of_register();
+#endif
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index e8c3f0d70ca6..5dea90636d94 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,8 +7,8 @@ config UX500_SOC_COMMON
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
+ select CLKSRC_NOMADIK_MTU
select COMMON_CLK
- select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
select PL310_ERRATA_753970 if CACHE_PL310
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index bde91a58e105..7209db7cdc72 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -8,8 +8,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 9c8e4a9e83ee..051b62c27102 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -11,9 +11,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5b70212c2536..d453522edb0d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -36,13 +36,12 @@
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
-#include <plat/ste_dma40.h>
-
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 93442fcd9eb0..db0bb75e2c76 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -21,16 +21,19 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/db8500-regs.h>
+#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 692a77a1c153..16b5f71e6974 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -14,6 +14,7 @@
#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include "devices-common.h"
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 91754a8a0d49..318d49020894 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,11 +12,11 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+#include <mach/irqs.h>
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3c8010f4fb3f..4b24c9992654 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
+#include <mach/irqs.h>
#include "devices-common.h"
struct ske_keypad_platform_data;
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index e8928548b6a3..fc77b4274c8d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -46,6 +46,6 @@
#include <mach/irqs-board-mop500.h>
#endif
-#define NR_IRQS IRQ_BOARD_END
+#define UX500_NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 3cc7142eee02..9991aea3d577 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -8,7 +8,7 @@
#ifndef __MSP_H
#define __MSP_H
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
enum msp_i2s_id {
MSP_I2S_0 = 0,
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 6f39731951b0..875309acb022 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -9,11 +9,10 @@
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <asm/smp_twd.h>
-#include <plat/mtu.h>
-
#include <mach/setup.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -96,7 +95,7 @@ dt_fail:
*
*/
- nmdk_timer_init(mtu_timer_base);
+ nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
clksrc_dbx500_prcmu_init(prcmu_timer_base);
ux500_twd_init();
}
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 145482e74418..78ac65f62e87 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,10 +7,10 @@
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
-#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
new file mode 100644
index 000000000000..2ed0b7d95db6
--- /dev/null
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5
+ default ARCH_VT8500_SINGLE
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 2b2419646e95..6f2b843115db 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -25,4 +25,7 @@ int __init vt8500_irq_init(struct device_node *node,
/* defined in drivers/clk/clk-vt8500.c */
void __init vtwm_clk_init(void __iomem *pmc_base);
+/* defined in irq.c */
+asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
+
#endif
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
deleted file mode 100644
index 367d1b55fb9a..000000000000
--- a/arch/arm/mach-vt8500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for VIA VT8500
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro get_irqnr_preamble, base, tmp
- @ physical 0xd8140000 is virtual 0xf8140000
- mov \base, #0xf8000000
- orr \base, \base, #0x00140000
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base]
- cmp \irqnr, #63 @ may be false positive, check interrupt status
- bne 1001f
- ldr \irqstat, [\base, #0x84]
- ands \irqstat, #0x80000000
- moveq \irqnr, #0
-1001:
- .endm
-
diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h
deleted file mode 100644
index a129fd1222fb..000000000000
--- a/arch/arm/mach-vt8500/include/mach/irqs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/irqs.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* This value is just to make the core happy, never used otherwise */
-#define NR_IRQS 128
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index f8f9ab9bc56e..b9cf5ce9efbb 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -36,7 +36,7 @@
#include <linux/of_address.h>
#include <asm/irq.h>
-
+#include <asm/exception.h>
#define VT8500_ICPC_IRQ 0x20
#define VT8500_ICPC_FIQ 0x24
@@ -66,30 +66,34 @@
#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
| VT8500_TRIGGER_FALLING)
-static int irq_cnt;
+/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
+#define VT8500_INTC_MAX 2
-struct vt8500_irq_priv {
- void __iomem *base;
+struct vt8500_irq_data {
+ void __iomem *base; /* IO Memory base address */
+ struct irq_domain *domain; /* Domain for this controller */
};
+/* Global variable for accessing io-mem addresses */
+static struct vt8500_irq_data intc[VT8500_INTC_MAX];
+static u32 active_cnt = 0;
+
static void vt8500_irq_mask(struct irq_data *d)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
- u8 edge;
+ void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
+ u8 edge, dctr;
+ u32 status;
edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
if (edge) {
- void __iomem *stat_reg = base + VT8500_ICIS
- + (d->hwirq < 32 ? 0 : 4);
- unsigned status = readl(stat_reg);
+ status = readl(stat_reg);
status |= (1 << (d->hwirq & 0x1f));
writel(status, stat_reg);
} else {
- u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
-
+ dctr = readb(base + VT8500_ICDC + d->hwirq);
dctr &= ~VT8500_INT_ENABLE;
writeb(dctr, base + VT8500_ICDC + d->hwirq);
}
@@ -97,8 +101,7 @@ static void vt8500_irq_mask(struct irq_data *d)
static void vt8500_irq_unmask(struct irq_data *d)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
u8 dctr;
@@ -109,8 +112,7 @@ static void vt8500_irq_unmask(struct irq_data *d)
static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
u8 dctr;
@@ -148,17 +150,15 @@ static struct irq_chip vt8500_irq_chip = {
static void __init vt8500_init_irq_hw(void __iomem *base)
{
- unsigned int i;
+ u32 i;
/* Enable rotating priority for IRQ */
writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
writel(0x00, base + VT8500_ICPC_FIQ);
- for (i = 0; i < 64; i++) {
- /* Disable all interrupts and route them to IRQ */
- writeb(VT8500_INT_DISABLE | ICDC_IRQ,
- base + VT8500_ICDC + i);
- }
+ /* Disable all interrupts and route them to IRQ */
+ for (i = 0; i < 64; i++)
+ writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
}
static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
@@ -175,33 +175,67 @@ static struct irq_domain_ops vt8500_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
+{
+ u32 stat, i;
+ int irqnr, virq;
+ void __iomem *base;
+
+ /* Loop through each active controller */
+ for (i=0; i<active_cnt; i++) {
+ base = intc[i].base;
+ irqnr = readl_relaxed(base) & 0x3F;
+ /*
+ Highest Priority register default = 63, so check that this
+ is a real interrupt by checking the status register
+ */
+ if (irqnr == 63) {
+ stat = readl_relaxed(base + VT8500_ICIS + 4);
+ if (!(stat & BIT(31)))
+ continue;
+ }
+
+ virq = irq_find_mapping(intc[i].domain, irqnr);
+ handle_IRQ(virq, regs);
+ }
+}
+
int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
{
- struct irq_domain *vt8500_irq_domain;
- struct vt8500_irq_priv *priv;
int irq, i;
struct device_node *np = node;
- priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
- priv->base = of_iomap(np, 0);
+ if (active_cnt == VT8500_INTC_MAX) {
+ pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
+ __func__);
+ goto out;
+ }
+
+ intc[active_cnt].base = of_iomap(np, 0);
+ intc[active_cnt].domain = irq_domain_add_linear(node, 64,
+ &vt8500_irq_domain_ops, &intc[active_cnt]);
- vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
- &vt8500_irq_domain_ops, priv);
- if (!vt8500_irq_domain)
- pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+ if (!intc[active_cnt].base) {
+ pr_err("%s: Unable to map IO memory\n", __func__);
+ goto out;
+ }
+
+ if (!intc[active_cnt].domain) {
+ pr_err("%s: Unable to add irq domain!\n", __func__);
+ goto out;
+ }
- irq_set_default_host(vt8500_irq_domain);
+ vt8500_init_irq_hw(intc[active_cnt].base);
- vt8500_init_irq_hw(priv->base);
+ pr_info("vt8500-irq: Added interrupt controller\n");
- pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
- (u32)(priv->base), irq_cnt);
+ active_cnt++;
/* check if this is a slaved controller */
if (of_irq_count(np) != 0) {
/* check that we have the correct number of interrupts */
if (of_irq_count(np) != 8) {
- pr_err("%s: Incorrect IRQ map for slave controller\n",
+ pr_err("%s: Incorrect IRQ map for slaved controller\n",
__func__);
return -EINVAL;
}
@@ -213,9 +247,7 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
}
-
- irq_cnt += 64;
-
+out:
return 0;
}
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index a5bd28692b06..3c66d48ea082 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -192,5 +192,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
.timer = &vt8500_timer,
.init_machine = vt8500_init,
.restart = vt8500_restart,
+ .handle_irq = vt8500_handle_irq,
MACHINE_END
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 000000000000..adb6c0ea0e53
--- /dev/null
+++ b/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,13 @@
+config ARCH_ZYNQ
+ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select ICST
+ select MIGHT_HAVE_CACHE_L2X0
+ select USE_OF
+ select SPARSE_IRQ
+ help
+ Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 79bf5fb4dad3..e16d4bed0f7a 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -30,10 +30,10 @@
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/zynq_soc.h>
#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
@@ -68,32 +68,15 @@ static void __init xilinx_irq_init(void)
of_irq_init(irq_match);
}
-/* The minimum devices needed to be mapped before the VM system is up and
- * running include the GIC, UART and Timer Counter.
- */
-
-static struct map_desc io_desc[] __initdata = {
- {
- .virtual = TTC0_VIRT,
- .pfn = __phys_to_pfn(TTC0_PHYS),
- .length = TTC0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = SCU_PERIPH_VIRT,
- .pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
- .length = SCU_PERIPH_SIZE,
- .type = MT_DEVICE,
- },
-
-#ifdef CONFIG_DEBUG_LL
- {
- .virtual = LL_UART_VADDR,
- .pfn = __phys_to_pfn(LL_UART_PADDR),
- .length = UART_SIZE,
- .type = MT_DEVICE,
- },
-#endif
+#define SCU_PERIPH_PHYS 0xF8F00000
+#define SCU_PERIPH_SIZE SZ_8K
+#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
+static struct map_desc scu_desc __initdata = {
+ .virtual = SCU_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
+ .length = SCU_PERIPH_SIZE,
+ .type = MT_DEVICE,
};
static void __init xilinx_zynq_timer_init(void)
@@ -122,7 +105,8 @@ static struct sys_timer xttcpss_sys_timer = {
*/
static void __init xilinx_map_io(void)
{
- iotable_init(io_desc, ARRAY_SIZE(io_desc));
+ debug_ll_io_init();
+ iotable_init(&scu_desc, 1);
}
static const char *xilinx_dt_match[] = {
diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h
deleted file mode 100644
index d558d8a94be7..000000000000
--- a/arch/arm/mach-zynq/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/hardware.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_HARDWARE_H__
-#define __MACH_HARDWARE_H__
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/irqs.h b/arch/arm/mach-zynq/include/mach/irqs.h
deleted file mode 100644
index 5fb04fd3bac8..000000000000
--- a/arch/arm/mach-zynq/include/mach/irqs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/irqs.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define ARCH_NR_GPIOS 118
-#define NR_IRQS (128 + ARCH_NR_GPIOS)
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/timex.h b/arch/arm/mach-zynq/include/mach/timex.h
deleted file mode 100644
index 6c0245e42a5e..000000000000
--- a/arch/arm/mach-zynq/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/timex.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TIMEX_H__
-#define __MACH_TIMEX_H__
-
-/* the following is needed for the system to build but will be removed
- in the future, the value is not important but won't hurt
-*/
-#define CLOCK_TICK_RATE (100 * HZ)
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h
deleted file mode 100644
index 5c47c97156f3..000000000000
--- a/arch/arm/mach-zynq/include/mach/uart.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uart.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UART_H__
-#define __MACH_UART_H__
-
-#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
-#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
-#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
-
-#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
-#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h
deleted file mode 100644
index af4e8447bfa3..000000000000
--- a/arch/arm/mach-zynq/include/mach/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uncompress.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UNCOMPRESS_H__
-#define __MACH_UNCOMPRESS_H__
-
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <mach/zynq_soc.h>
-#include <mach/uart.h>
-
-void arch_decomp_setup(void)
-{
-}
-
-static inline void flush(void)
-{
- /*
- * Wait while the FIFO is not empty
- */
- while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
- UART_SR_TXEMPTY))
- cpu_relax();
-}
-
-#define arch_decomp_wdog()
-
-static void putc(char ch)
-{
- /*
- * Wait for room in the FIFO, then write the char into the FIFO
- */
- while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
- UART_SR_TXFULL)
- cpu_relax();
-
- __raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
-}
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
deleted file mode 100644
index 5ebbd8e6eeee..000000000000
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/zynq_soc.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_XILINX_SOC_H__
-#define __MACH_XILINX_SOC_H__
-
-#include <asm/pgtable.h>
-
-#define PERIPHERAL_CLOCK_RATE 2500000
-
-/* Static peripheral mappings are mapped at the top of the vmalloc region. The
- * early uart mapping causes intermediate problems/failure at certain
- * addresses, including the very top of the vmalloc region. Map it at an
- * address that is known to work.
- */
-#define UART0_PHYS 0xE0000000
-#define UART1_PHYS 0xE0001000
-#define UART_SIZE SZ_4K
-#define UART_VIRT 0xF0001000
-
-#define TTC0_PHYS 0xF8001000
-#define TTC0_SIZE SZ_4K
-#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE)
-
-#define SCU_PERIPH_PHYS 0xF8F00000
-#define SCU_PERIPH_SIZE SZ_8K
-#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE)
-
-#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
-# define LL_UART_PADDR UART1_PHYS
-#else
-# define LL_UART_PADDR UART0_PHYS
-#endif
-
-#define LL_UART_VADDR UART_VIRT
-
-/* The following are intended for the devices that are mapped early */
-
-#define TTC0_BASE IOMEM(TTC0_VIRT)
-#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
-
-#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index 9662306aa12f..de3df283da74 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/clk-provider.h>
-#include <mach/zynq_soc.h>
#include "common.h"
/*
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
deleted file mode 100644
index 19f55cae5d73..000000000000
--- a/arch/arm/plat-nomadik/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# We keep common IP's here for Nomadik and other similar
-# familiy of processors from ST-Ericsson. At the moment we have
-# just MTU, others to follow soon.
-
-config PLAT_NOMADIK
- bool
- depends on ARCH_NOMADIK || ARCH_U8500
- default y
- select CLKSRC_MMIO
- help
- Common platform code for Nomadik and other ST-Ericsson
- platforms.
-
-if PLAT_NOMADIK
-
-config HAS_MTU
- bool
- help
- Support for Multi Timer Unit. MTU provides access
- to multiple interrupt generating programmable
- 32-bit free running decrementing counters.
-
-config NOMADIK_MTU_SCHED_CLOCK
- bool
- depends on HAS_MTU
- help
- Use the Multi Timer Unit as the sched_clock.
-
-endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
deleted file mode 100644
index 37c7cdd0f8f0..000000000000
--- a/arch/arm/plat-nomadik/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# arch/arm/plat-nomadik/Makefile
-# Copyright 2009 ST-Ericsson
-# Licensed under GPLv2
-
-obj-$(CONFIG_HAS_MTU) += timer.o
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
deleted file mode 100644
index 582641f3dc01..000000000000
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __PLAT_MTU_H
-#define __PLAT_MTU_H
-
-void nmdk_timer_init(void __iomem *base);
-void nmdk_clkevt_reset(void);
-void nmdk_clksrc_reset(void);
-
-#endif /* __PLAT_MTU_H */
-
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
deleted file mode 100644
index 9ff93b065686..000000000000
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2007-2010
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-
-#ifndef STE_DMA40_H
-#define STE_DMA40_H
-
-#include <linux/dmaengine.h>
-#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-/*
- * Maxium size for a single dma descriptor
- * Size is limited to 16 bits.
- * Size is in the units of addr-widths (1,2,4,8 bytes)
- * Larger transfers will be split up to multiple linked desc
- */
-#define STEDMA40_MAX_SEG_SIZE 0xFFFF
-
-/* dev types for memcpy */
-#define STEDMA40_DEV_DST_MEMORY (-1)
-#define STEDMA40_DEV_SRC_MEMORY (-1)
-
-enum stedma40_mode {
- STEDMA40_MODE_LOGICAL = 0,
- STEDMA40_MODE_PHYSICAL,
- STEDMA40_MODE_OPERATION,
-};
-
-enum stedma40_mode_opt {
- STEDMA40_PCHAN_BASIC_MODE = 0,
- STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
- STEDMA40_PCHAN_MODULO_MODE,
- STEDMA40_PCHAN_DOUBLE_DST_MODE,
- STEDMA40_LCHAN_SRC_PHY_DST_LOG,
- STEDMA40_LCHAN_SRC_LOG_DST_PHY,
-};
-
-#define STEDMA40_ESIZE_8_BIT 0x0
-#define STEDMA40_ESIZE_16_BIT 0x1
-#define STEDMA40_ESIZE_32_BIT 0x2
-#define STEDMA40_ESIZE_64_BIT 0x3
-
-/* The value 4 indicates that PEN-reg shall be set to 0 */
-#define STEDMA40_PSIZE_PHY_1 0x4
-#define STEDMA40_PSIZE_PHY_2 0x0
-#define STEDMA40_PSIZE_PHY_4 0x1
-#define STEDMA40_PSIZE_PHY_8 0x2
-#define STEDMA40_PSIZE_PHY_16 0x3
-
-/*
- * The number of elements differ in logical and
- * physical mode
- */
-#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
-#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
-#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
-#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
-
-/* Maximum number of possible physical channels */
-#define STEDMA40_MAX_PHYS 32
-
-enum stedma40_flow_ctrl {
- STEDMA40_NO_FLOW_CTRL,
- STEDMA40_FLOW_CTRL,
-};
-
-enum stedma40_periph_data_width {
- STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
- STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
- STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
- STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
- STEDMA40_MEM_TO_MEM = 1,
- STEDMA40_MEM_TO_PERIPH,
- STEDMA40_PERIPH_TO_MEM,
- STEDMA40_PERIPH_TO_PERIPH
-};
-
-
-/**
- * struct stedma40_chan_cfg - dst/src channel configuration
- *
- * @big_endian: true if the src/dst should be read as big endian
- * @data_width: Data width of the src/dst hardware
- * @p_size: Burst size
- * @flow_ctrl: Flow control on/off.
- */
-struct stedma40_half_channel_info {
- bool big_endian;
- enum stedma40_periph_data_width data_width;
- int psize;
- enum stedma40_flow_ctrl flow_ctrl;
-};
-
-/**
- * struct stedma40_chan_cfg - Structure to be filled by client drivers.
- *
- * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @high_priority: true if high-priority
- * @realtime: true if realtime mode is to be enabled. Only available on DMA40
- * version 3+, i.e DB8500v2+
- * @mode: channel mode: physical, logical, or operation
- * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
- * @src_info: Parameters for dst half channel
- * @dst_info: Parameters for dst half channel
- * @use_fixed_channel: if true, use physical channel specified by phy_channel
- * @phy_channel: physical channel to use, only if use_fixed_channel is true
- *
- * This structure has to be filled by the client drivers.
- * It is recommended to do all dma configurations for clients in the machine.
- *
- */
-struct stedma40_chan_cfg {
- enum stedma40_xfer_dir dir;
- bool high_priority;
- bool realtime;
- enum stedma40_mode mode;
- enum stedma40_mode_opt mode_opt;
- int src_dev_type;
- int dst_dev_type;
- struct stedma40_half_channel_info src_info;
- struct stedma40_half_channel_info dst_info;
-
- bool use_fixed_channel;
- int phy_channel;
-};
-
-/**
- * struct stedma40_platform_data - Configuration struct for the dma device.
- *
- * @dev_len: length of dev_tx and dev_rx
- * @dev_tx: mapping between destination event line and io address
- * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
- * @disabled_channels: A vector, ending with -1, that marks physical channels
- * that are for different reasons not available for the driver.
- */
-struct stedma40_platform_data {
- u32 dev_len;
- const dma_addr_t *dev_tx;
- const dma_addr_t *dev_rx;
- int *memcpy;
- u32 memcpy_len;
- struct stedma40_chan_cfg *memcpy_conf_phy;
- struct stedma40_chan_cfg *memcpy_conf_log;
- int disabled_channels[STEDMA40_MAX_PHYS];
- bool use_esram_lcla;
-};
-
-#ifdef CONFIG_STE_DMA40
-
-/**
- * stedma40_filter() - Provides stedma40_chan_cfg to the
- * ste_dma40 dma driver via the dmaengine framework.
- * does some checking of what's provided.
- *
- * Never directly called by client. It used by dmaengine.
- * @chan: dmaengine handle.
- * @data: Must be of type: struct stedma40_chan_cfg and is
- * the configuration of the framework.
- *
- *
- */
-
-bool stedma40_filter(struct dma_chan *chan, void *data);
-
-/**
- * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
- * (=device)
- *
- * @chan: dmaengine handle
- * @addr: source or destination physicall address.
- * @size: bytes to transfer
- * @direction: direction of transfer
- * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
- */
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
- dma_addr_t addr,
- unsigned int size,
- enum dma_transfer_direction direction,
- unsigned long flags)
-{
- struct scatterlist sg;
- sg_init_table(&sg, 1);
- sg.dma_address = addr;
- sg.length = size;
-
- return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
-}
-
-#else
-static inline bool stedma40_filter(struct dma_chan *chan, void *data)
-{
- return false;
-}
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
- dma_addr_t addr,
- unsigned int size,
- enum dma_transfer_direction direction,
- unsigned long flags)
-{
- return NULL;
-}
-#endif
-
-#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
deleted file mode 100644
index 9222e5522a43..000000000000
--- a/arch/arm/plat-nomadik/timer.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/plat-nomadik/timer.c
- *
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2010 Alessandro Rubini
- * Copyright (C) 2010 Linus Walleij for ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/jiffies.h>
-#include <linux/err.h>
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
-#define MTU_RIS 0x04 /* Raw interrupt status */
-#define MTU_MIS 0x08 /* Masked interrupt status */
-#define MTU_ICR 0x0C /* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
-#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
-#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
-#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA 0x80
-#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK 0x0c
-#define MTU_CRn_PRESCALE_1 0x00
-#define MTU_CRn_PRESCALE_16 0x04
-#define MTU_CRn_PRESCALE_256 0x08
-#define MTU_CRn_32BITS 0x02
-#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR 0xff0
-#define MTU_ITOP 0xff4
-
-#define MTU_PERIPH_ID0 0xfe0
-#define MTU_PERIPH_ID1 0xfe4
-#define MTU_PERIPH_ID2 0xfe8
-#define MTU_PERIPH_ID3 0xfeC
-
-#define MTU_PCELL0 0xff0
-#define MTU_PCELL1 0xff4
-#define MTU_PCELL2 0xff8
-#define MTU_PCELL3 0xffC
-
-static void __iomem *mtu_base;
-static bool clkevt_periodic;
-static u32 clk_prescale;
-static u32 nmdk_cycle; /* write-once */
-
-#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel.
- */
-static u32 notrace nomadik_read_sched_clock(void)
-{
- if (unlikely(!mtu_base))
- return 0;
-
- return -readl(mtu_base + MTU_VAL(0));
-}
-#endif
-
-/* Clockevent device: use one-shot mode */
-static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
-{
- writel(1 << 1, mtu_base + MTU_IMSC);
- writel(evt, mtu_base + MTU_LR(1));
- /* Load highest value, enable device, enable interrupts */
- writel(MTU_CRn_ONESHOT | clk_prescale |
- MTU_CRn_32BITS | MTU_CRn_ENA,
- mtu_base + MTU_CR(1));
-
- return 0;
-}
-
-void nmdk_clkevt_reset(void)
-{
- if (clkevt_periodic) {
- /* Timer: configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(1));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
-
- writel(MTU_CRn_PERIODIC | clk_prescale |
- MTU_CRn_32BITS | MTU_CRn_ENA,
- mtu_base + MTU_CR(1));
- writel(1 << 1, mtu_base + MTU_IMSC);
- } else {
- /* Generate an interrupt to start the clockevent again */
- (void) nmdk_clkevt_next(nmdk_cycle, NULL);
- }
-}
-
-static void nmdk_clkevt_mode(enum clock_event_mode mode,
- struct clock_event_device *dev)
-{
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- clkevt_periodic = true;
- nmdk_clkevt_reset();
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- clkevt_periodic = false;
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- writel(0, mtu_base + MTU_IMSC);
- /* disable timer */
- writel(0, mtu_base + MTU_CR(1));
- /* load some high default value */
- writel(0xffffffff, mtu_base + MTU_LR(1));
- break;
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device nmdk_clkevt = {
- .name = "mtu_1",
- .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
- .rating = 200,
- .set_mode = nmdk_clkevt_mode,
- .set_next_event = nmdk_clkevt_next,
-};
-
-/*
- * IRQ Handler for timer 1 of the MTU block.
- */
-static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evdev = dev_id;
-
- writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
- evdev->event_handler(evdev);
- return IRQ_HANDLED;
-}
-
-static struct irqaction nmdk_timer_irq = {
- .name = "Nomadik Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = nmdk_timer_interrupt,
- .dev_id = &nmdk_clkevt,
-};
-
-void nmdk_clksrc_reset(void)
-{
- /* Disable */
- writel(0, mtu_base + MTU_CR(0));
-
- /* ClockSource: configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(0));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
- writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
- mtu_base + MTU_CR(0));
-}
-
-void __init nmdk_timer_init(void __iomem *base)
-{
- unsigned long rate;
- struct clk *clk0;
-
- mtu_base = base;
- clk0 = clk_get_sys("mtu0", NULL);
- BUG_ON(IS_ERR(clk0));
- BUG_ON(clk_prepare(clk0) < 0);
- BUG_ON(clk_enable(clk0) < 0);
-
- /*
- * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
- * for ux500.
- * Use a divide-by-16 counter if the tick rate is more than 32MHz.
- * At 32 MHz, the timer (with 32 bit counter) can be programmed
- * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
- * with 16 gives too low timer resolution.
- */
- rate = clk_get_rate(clk0);
- if (rate > 32000000) {
- rate /= 16;
- clk_prescale = MTU_CRn_PRESCALE_16;
- } else {
- clk_prescale = MTU_CRn_PRESCALE_1;
- }
-
- nmdk_cycle = (rate + HZ/2) / HZ;
-
-
- /* Timer 0 is the free running clocksource */
- nmdk_clksrc_reset();
-
- if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
- rate, 200, 32, clocksource_mmio_readl_down))
- pr_err("timer: failed to initialize clock source %s\n",
- "mtu_0");
-
-#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
- setup_sched_clock(nomadik_read_sched_clock, 32, rate);
-#endif
-
- /* Timer 1 is used for events, register irq and clockevents */
- setup_irq(IRQ_MTU0, &nmdk_timer_irq);
- nmdk_clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
-}