diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-idp.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-idp.dts | 169 |
1 files changed, 168 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index e77a7926034a..acdb36f4479f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "sc7180.dtsi" #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -45,7 +46,7 @@ /* Increase the size from 2MB to 8MB */ &rmtfs_mem { - reg = <0x0 0x84400000 0x0 0x800000>; + reg = <0x0 0x94600000 0x0 0x800000>; }; / { @@ -288,6 +289,57 @@ }; }; +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l3c_1p2>; + + panel@0 { + compatible = "visionox,rm69299-1080p-display"; + reg = <0>; + + vdda-supply = <&vreg_l8c_1p8>; + vdd3p3-supply = <&vreg_l18a_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pins>; + + reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi_phy { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + &qfprom { vcc-supply = <&vreg_l11a_1p8>; }; @@ -414,6 +466,19 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&pm6150l_gpio { + disp_pins: disp-pins { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_FUNC1; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; + power-source = <0>; + bias-disable; + output-low; + }; + }; +}; + &qspi_clk { pinconf { pins = "gpio63"; @@ -598,4 +663,106 @@ bias-pull-up; }; }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; }; |