diff options
Diffstat (limited to 'arch/arm/mach-ux500/cpu.c')
-rw-r--r-- | arch/arm/mach-ux500/cpu.c | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c new file mode 100644 index 000000000000..5a43107c6232 --- /dev/null +++ b/arch/arm/mach-ux500/cpu.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <asm/localtimer.h> + +#include <plat/mtu.h> +#include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> +#include <mach/prcmu.h> + +#include "clock.h" + +#ifdef CONFIG_CACHE_L2X0 +static void __iomem *l2x0_base; +#endif + +void __init ux500_init_irq(void) +{ + void __iomem *dist_base; + void __iomem *cpu_base; + + if (cpu_is_u5500()) { + dist_base = __io_address(U5500_GIC_DIST_BASE); + cpu_base = __io_address(U5500_GIC_CPU_BASE); + } else if (cpu_is_u8500()) { + dist_base = __io_address(U8500_GIC_DIST_BASE); + cpu_base = __io_address(U8500_GIC_CPU_BASE); + } else + ux500_unknown_soc(); + + gic_init(0, 29, dist_base, cpu_base); + + /* + * Init clocks here so that they are available for system timer + * initialization. + */ + if (cpu_is_u8500()) + prcmu_early_init(); + clk_init(); +} + +#ifdef CONFIG_CACHE_L2X0 +static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) +{ + /* wait for the operation to complete */ + while (readl_relaxed(reg) & mask) + ; +} + +static inline void ux500_cache_sync(void) +{ + void __iomem *base = l2x0_base; + + writel_relaxed(0, base + L2X0_CACHE_SYNC); + ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); +} + +/* + * The L2 cache cannot be turned off in the non-secure world. + * Dummy until a secure service is in place. + */ +static void ux500_l2x0_disable(void) +{ +} + +/* + * This is only called when doing a kexec, just after turning off the L2 + * and L1 cache, and it is surrounded by a spinlock in the generic version. + * However, we're not really turning off the L2 cache right now and the + * PL310 does not support exclusive accesses (used to implement the spinlock). + * So, the invalidation needs to be done without the spinlock. + */ +static void ux500_l2x0_inv_all(void) +{ + void __iomem *base = l2x0_base; + uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ + + /* invalidate all ways */ + writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY); + ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask); + ux500_cache_sync(); +} + +static int ux500_l2x0_init(void) +{ + if (cpu_is_u5500()) + l2x0_base = __io_address(U5500_L2CC_BASE); + else if (cpu_is_u8500()) + l2x0_base = __io_address(U8500_L2CC_BASE); + else + ux500_unknown_soc(); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + /* Override invalidate function */ + outer_cache.disable = ux500_l2x0_disable; + outer_cache.inv_all = ux500_l2x0_inv_all; + + return 0; +} +early_initcall(ux500_l2x0_init); +#endif + +static void __init ux500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + if (cpu_is_u5500()) + twd_base = __io_address(U5500_TWD_BASE); + else if (cpu_is_u8500()) + twd_base = __io_address(U8500_TWD_BASE); + else + ux500_unknown_soc(); +#endif + if (cpu_is_u5500()) + mtu_base = __io_address(U5500_MTU0_BASE); + else if (cpu_is_u8500ed()) + mtu_base = __io_address(U8500_MTU0_BASE_ED); + else if (cpu_is_u8500()) + mtu_base = __io_address(U8500_MTU0_BASE); + else + ux500_unknown_soc(); + + nmdk_timer_init(); +} + +struct sys_timer ux500_timer = { + .init = ux500_timer_init, +}; |