summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/palmz72.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/palmz72.c')
-rw-r--r--arch/arm/mach-pxa/palmz72.c112
1 files changed, 0 insertions, 112 deletions
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 4df443943579..b4a5fe02a0af 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -47,8 +47,6 @@
#include "pm.h"
#include <linux/platform_data/media/camera-pxa.h>
-#include <media/soc_camera.h>
-
#include "generic.h"
#include "devices.h"
@@ -272,115 +270,6 @@ static int __init palmz72_pm_init(void)
device_initcall(palmz72_pm_init);
#endif
-/******************************************************************************
- * SoC Camera
- ******************************************************************************/
-#if defined(CONFIG_SOC_CAMERA_OV9640) || \
- defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
-static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
- .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
- PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
- .mclk_10khz = 2600,
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info palmz72_i2c_device[] = {
- {
- I2C_BOARD_INFO("ov9640", 0x30),
- }
-};
-
-static int palmz72_camera_power(struct device *dev, int power)
-{
- gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
- mdelay(50);
- return 0;
-}
-
-static int palmz72_camera_reset(struct device *dev)
-{
- gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
- mdelay(50);
- gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
- mdelay(50);
- return 0;
-}
-
-static struct soc_camera_link palmz72_iclink = {
- .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
- .board_info = &palmz72_i2c_device[0],
- .i2c_adapter_id = 0,
- .module_name = "ov96xx",
- .power = &palmz72_camera_power,
- .reset = &palmz72_camera_reset,
- .flags = SOCAM_DATAWIDTH_8,
-};
-
-static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
- .dev_id = "i2c-gpio.0",
- .table = {
- GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
- .udelay = 10,
- .timeout = 100,
-};
-
-static struct platform_device palmz72_i2c_bus_device = {
- .name = "i2c-gpio",
- .id = 0, /* we use this as a replacement for i2c-pxa */
- .dev = {
- .platform_data = &palmz72_i2c_bus_data,
- }
-};
-
-static struct platform_device palmz72_camera = {
- .name = "soc-camera-pdrv",
- .id = -1,
- .dev = {
- .platform_data = &palmz72_iclink,
- },
-};
-
-/* Here we request the camera GPIOs and configure them. We power up the camera
- * module, deassert the reset pin, but put it into powerdown (low to no power
- * consumption) mode. This allows us to later bring the module up fast. */
-static struct gpio palmz72_camera_gpios[] = {
- { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" },
- { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" },
- { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" },
-};
-
-static inline void __init palmz72_cam_gpio_init(void)
-{
- int ret;
-
- ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
- if (!ret)
- gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
- else
- printk(KERN_ERR "Camera GPIO init failed!\n");
-
- return;
-}
-
-static void __init palmz72_camera_init(void)
-{
- palmz72_cam_gpio_init();
- pxa_set_camera_info(&palmz72_pxacamera_platform_data);
- gpiod_add_lookup_table(&palmz72_i2c_gpiod_table);
- platform_device_register(&palmz72_i2c_bus_device);
- platform_device_register(&palmz72_camera);
-}
-#else
-static inline void palmz72_camera_init(void) {}
-#endif
-
static struct gpiod_lookup_table palmz72_mci_gpio_table = {
.dev_id = "pxa2xx-mci.0",
.table = {
@@ -416,7 +305,6 @@ static void __init palmz72_init(void)
palm27x_pmic_init();
palmz72_kpc_init();
palmz72_leds_init();
- palmz72_camera_init();
}
MACHINE_START(PALMZ72, "Palm Zire72")