diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx/nas100d-setup.c')
| -rw-r--r-- | arch/arm/mach-ixp4xx/nas100d-setup.c | 49 |
1 files changed, 30 insertions, 19 deletions
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index ed667ce9f576..507cb5233537 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -184,11 +184,8 @@ static void nas100d_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NAS100D_PO_GPIO, 1); } /* This is used to make sure the power-button pusher is serious. The button @@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data) ctrl_alt_del(); /* Change the state of the power LED to "blink" */ - gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + gpio_set_value(NAS100D_LED_PWR_GPIO, 0); } else { power_button_countdown = PBUTTON_HOLDDOWN_COUNT; } @@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nas100d_gpio_init(void) +{ + if (!machine_is_nas100d()) + return 0; + + /* + * The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Request the power off GPIO */ + gpio_request(NAS100D_PO_GPIO, "power off"); + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(NAS100D_PB_GPIO, "power button"); + gpio_direction_input(NAS100D_PB_GPIO); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + + return 0; +} +device_initcall(nas100d_gpio_init); + static void __init nas100d_init(void) { uint8_t __iomem *f; @@ -278,19 +302,6 @@ static void __init nas100d_init(void) gpio_to_irq(NAS100D_RB_GPIO)); } - /* The power button on the Iomega NAS100d is on GPIO 14, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); - /* * Map in a portion of the flash and read the MAC address. * Since it is stored in BE in the flash itself, we need to |