diff options
Diffstat (limited to 'arch/arm/boot/dts/sunxi-h3-h5.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sunxi-h3-h5.dtsi | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d74a6cbbfdf4..84977d4eb97a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -227,6 +227,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; @@ -237,6 +242,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -298,7 +304,6 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -310,7 +315,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -321,7 +325,6 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -333,7 +336,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -344,7 +346,6 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -356,7 +357,6 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -381,14 +381,14 @@ interrupt-controller; #interrupt-cells = <3>; - csi_pins: csi { + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; function = "csi"; }; - emac_rgmii_pins: emac0 { + emac_rgmii_pins: emac-rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; @@ -396,22 +396,22 @@ drive-strength = <40>; }; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PA11", "PA12"; function = "i2c0"; }; - i2c1_pins: i2c1 { + i2c1_pins: i2c1-pins { pins = "PA18", "PA19"; function = "i2c1"; }; - i2c2_pins: i2c2 { + i2c2_pins: i2c2-pins { pins = "PE12", "PE13"; function = "i2c2"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -419,7 +419,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -427,7 +427,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -437,47 +437,47 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PA17"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PA15", "PA16", "PA14", "PA13"; function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pa_pins: uart0-pa-pins { pins = "PA4", "PA5"; function = "uart0"; }; - uart1_pins: uart1 { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; - uart2_pins: uart2 { + uart2_pins: uart2-pins { pins = "PA0", "PA1"; function = "uart2"; }; - uart3_pins: uart3 { + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; }; - uart3_rts_cts_pins: uart3_rts_cts { + uart3_rts_cts_pins: uart3-rts-cts-pins { pins = "PA15", "PA16"; function = "uart3"; }; @@ -855,12 +855,12 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir { + r_ir_rx_pin: r-ir-rx-pin { pins = "PL11"; function = "s_cir_rx"; }; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; |