diff options
Diffstat (limited to 'arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts')
| -rw-r--r-- | arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 183 |
1 files changed, 156 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 52153ec3638c..a4058f4cfbcd 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -8,6 +8,29 @@ * kind, whether express or implied. */ +/* + * SSI-SGTL5000 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7745-iwg22m.dtsi" @@ -16,13 +39,35 @@ compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; aliases { - serial0 = &scif4; ethernet0 = &avb; + serial3 = &scif4; + serial5 = &hscif1; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; + stdout-path = "serial3:115200n8"; + }; + + audio_clock: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; vccq_sdhi0: regulator-vccq-sdhi0 { @@ -39,53 +84,139 @@ }; }; -&pfc { - scif4_pins: scif4 { - groups = "scif4_data_b"; - function = "scif4"; +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&i2c5 { + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data", "hscif1_ctrl"; + function = "hscif1"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5_b"; + function = "i2c5"; + }; + + scif4_pins: scif4 { + groups = "scif4_data_b"; + function = "scif4"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <3300>; }; + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + usb1_pins: usb1 { groups = "usb1"; function = "usb1"; }; }; -&scif4 { - pinctrl-0 = <&scif4_pins>; +&rcar_sound { + pinctrl-0 = <&sound_pins>; pinctrl-names = "default"; - status = "okay"; + + /* Single DAI */ + + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi3 &src3 &dvc0>; + capture = <&ssi4 &src4 &dvc1>; + }; + }; }; -&avb { - pinctrl-0 = <&avb_pins>; +&scif4 { + pinctrl-0 = <&scif4_pins>; pinctrl-names = "default"; - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; status = "okay"; - - phy3: ethernet-phy@3 { - /* - * On some older versions of the platform (before R4.0) the phy address - * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. - */ - reg = <3>; - micrel,led-mode = <1>; - }; }; &sdhi0 { @@ -98,10 +229,8 @@ status = "okay"; }; -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; +&ssi4 { + shared-pin; }; &usbphy { |