diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 135 |
1 files changed, 32 insertions, 103 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87badeae3181..22dc1d6936bc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -28,7 +28,6 @@ config ARM select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_KEEP_MEMBLOCK select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 select ARCH_SUPPORTS_ATOMIC_RMW @@ -42,6 +41,7 @@ config ARM select ARCH_WANT_LD_ORPHAN_WARN select BINFMT_FLAT_ARGVP_ENVP_ON_STACK select BUILDTIME_TABLE_SORT if MMU + select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE) select CLONE_BACKWARDS select CPU_PM if SUSPEND || CPU_IDLE select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -110,6 +110,7 @@ config ARM select HAVE_MOD_ARCH_SPECIFIC select HAVE_NMI select HAVE_OPTPROBES if !THUMB2_KERNEL + select HAVE_PCI if MMU select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP @@ -126,13 +127,17 @@ config ARM select OF_EARLY_FLATTREE if OF select OLD_SIGACTION select OLD_SIGSUSPEND3 + select PCI_DOMAINS_GENERIC if PCI select PCI_SYSCALL if PCI select PERF_USE_VMALLOC select RTC_LIB + select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC) select SYS_SUPPORTS_APM_EMULATION select THREAD_INFO_IN_TASK + select TIMER_OF if OF select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M + select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) # Above selects are sorted alphabetically; please add new ones # according to that. Thanks. help @@ -154,12 +159,8 @@ config ARM_HAS_GROUP_RELOCS which is usually sufficient, but not for allyesconfig, so we disable this feature when doing compile testing. -config ARM_HAS_SG_CHAIN - bool - config ARM_DMA_USE_IOMMU bool - select ARM_HAS_SG_CHAIN select NEED_SG_DMA_LENGTH if ARM_DMA_USE_IOMMU @@ -245,7 +246,7 @@ config ARCH_MTD_XIP config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED default y - depends on !XIP_KERNEL && MMU + depends on MMU help Patch phys-to-virt and virt-to-phys translation functions at boot and module load time according to the position of the @@ -274,7 +275,7 @@ config NEED_MACH_MEMORY_H config PHYS_OFFSET hex "Physical address of main memory" if MMU - depends on !ARM_PATCH_PHYS_VIRT + depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR default DRAM_BASE if !MMU default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC @@ -307,13 +308,8 @@ config MMU config ARM_SINGLE_ARMV7M def_bool !MMU select ARM_NVIC - select AUTO_ZRELADDR - select TIMER_OF - select COMMON_CLK select CPU_V7M select NO_IOPORT_MAP - select SPARSE_IRQ - select USE_OF config ARCH_MMAP_RND_BITS_MIN default 8 @@ -323,94 +319,31 @@ config ARCH_MMAP_RND_BITS_MAX default 15 if PAGE_OFFSET=0x80000000 default 16 -# -# The "ARM system type" choice list is ordered alphabetically by option -# text. Please add new entries in the option alphabetic order. -# -choice - prompt "ARM system type" - depends on MMU - default ARCH_MULTIPLATFORM - config ARCH_MULTIPLATFORM - bool "Allow multiple platforms to be selected" - select ARCH_FLATMEM_ENABLE - select ARCH_SPARSEMEM_ENABLE - select ARCH_SELECT_MEMORY_MODEL - select ARM_HAS_SG_CHAIN - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR - select TIMER_OF - select COMMON_CLK - select HAVE_PCI - select PCI_DOMAINS_GENERIC if PCI - select SPARSE_IRQ - select USE_OF - -config ARCH_FOOTBRIDGE - bool "FootBridge" - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select CPU_SA110 - select FOOTBRIDGE - select NEED_MACH_MEMORY_H - help - Support for systems based on the DC21285 companion chip - ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. - -config ARCH_RPC - bool "RiscPC" - depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select ARCH_ACORN - select ARCH_MAY_HAVE_PC_FDC - select ARCH_SPARSEMEM_ENABLE - select ARM_HAS_SG_CHAIN - select CPU_SA110 - select FIQ - select HAVE_PATA_PLATFORM - select ISA_DMA_API - select LEGACY_TIMER_TICK - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select NO_IOPORT_MAP + bool "Require kernel to be portable to multiple machines" if EXPERT + depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + default y help - On the Acorn Risc-PC, Linux can support the internal IDE disk and - CD-ROM interface, serial and parallel port, and the floppy drive. + In general, all Arm machines can be supported in a single + kernel image, covering either Armv4/v5 or Armv6/v7. -config ARCH_SA1100 - bool "SA1100-based" - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select ARCH_MTD_XIP - select ARCH_SPARSEMEM_ENABLE - select CLKSRC_MMIO - select CLKSRC_PXA - select TIMER_OF if OF - select COMMON_CLK - select CPU_FREQ - select CPU_SA1100 - select GPIOLIB - select IRQ_DOMAIN - select ISA - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - help - Support for StrongARM 11x0 based boards. + However, some configuration options require hardcoding machine + specific physical addresses or enable errata workarounds that may + break other machines. -endchoice + Selecting N here allows using those options, including + DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y. -menu "Multiple platform selection" - depends on ARCH_MULTIPLATFORM +menu "Platform selection" + depends on MMU comment "CPU Core family selection" config ARCH_MULTI_V4 - bool "ARMv4 based platforms (FA526)" + bool "ARMv4 based platforms (FA526, StrongARM)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 - select CPU_FA526 + select CPU_FA526 if !(CPU_SA110 || CPU_SA1100) config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" @@ -472,7 +405,6 @@ config ARCH_AIROHA select ARM_GIC_V3 select ARM_PSCI select HAVE_ARM_ARCH_TIMER - select COMMON_CLK help Support for Airoha EN7523 SoCs @@ -573,6 +505,8 @@ source "arch/arm/mach-rda/Kconfig" source "arch/arm/mach-realtek/Kconfig" +source "arch/arm/mach-rpc/Kconfig" + source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s3c/Kconfig" @@ -638,7 +572,6 @@ config ARCH_ACORN config PLAT_ORION bool select CLKSRC_MMIO - select COMMON_CLK select GENERIC_IRQ_CHIP select IRQ_DOMAIN @@ -989,11 +922,6 @@ config ISA (MCA) or VESA. ISA is an older system, now being displaced by PCI; newer boards don't support it. If you have ISA, say Y, otherwise N. -# Select ISA DMA controller support -config ISA_DMA - bool - select ISA_DMA_API - # Select ISA DMA interface config ISA_DMA_API bool @@ -1054,7 +982,7 @@ config SMP config SMP_ON_UP bool "Allow booting SMP kernel on uniprocessor systems" - depends on SMP && !XIP_KERNEL && MMU + depends on SMP && MMU default y help SMP kernels contain instructions which fail on non-SMP processors. @@ -1303,7 +1231,7 @@ config THUMB2_KERNEL config ARM_PATCH_IDIV bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" - depends on CPU_32v7 && !XIP_KERNEL + depends on CPU_32v7 default y help The ARM compiler inserts calls to __aeabi_idiv() and @@ -1358,13 +1286,13 @@ config OABI_COMPAT at all). If in doubt say N. config ARCH_SELECT_MEMORY_MODEL - bool + def_bool y config ARCH_FLATMEM_ENABLE - bool + def_bool !(ARCH_RPC || ARCH_SA1100) config ARCH_SPARSEMEM_ENABLE - bool + def_bool !ARCH_FOOTBRIDGE select SPARSEMEM_STATIC if SPARSEMEM config HIGHMEM @@ -1671,7 +1599,6 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER - depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -1698,6 +1625,7 @@ endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" depends on !ARM_LPAE && !ARCH_MULTIPLATFORM + depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP help Execute-In-Place allows the kernel to run from non-volatile storage directly addressable by the CPU, such as NOR flash. This saves RAM @@ -1772,7 +1700,8 @@ config CRASH_DUMP For more details see Documentation/admin-guide/kdump/kdump.rst config AUTO_ZRELADDR - bool "Auto calculation of the decompressed kernel image address" + bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM + default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address |