diff options
Diffstat (limited to 'Documentation')
8 files changed, 53 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt index fb87c7d74f2e..8fb5a53775e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt @@ -8,6 +8,17 @@ Required Properties: - reg: Should contain the register base address and size of the pin controller. - clocks: phandle of the clock feeding the pin controller +- gpio-controller: Marks the device node as a GPIO controller. +- gpio-ranges: Specifies the mapping between gpio controller and + pin-controller pins. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt. Shall be set to 2. The first cell + defines the interrupt number, the second encodes + the trigger flags described in + bindings/interrupt-controller/interrupts.txt Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -164,6 +175,11 @@ Example: compatible = "actions,s900-pinctrl"; reg = <0x0 0xe01b0000 0x0 0x1000>; clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; uart2-default: uart2-default { pinmux { diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 64bc5c2a76da..258a4648ab81 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -28,6 +28,7 @@ Required properties: "allwinner,sun50i-a64-r-pinctrl" "allwinner,sun50i-h5-pinctrl" "allwinner,sun50i-h6-pinctrl" + "allwinner,sun50i-h6-r-pinctrl" "nextthing,gr8-pinctrl" - reg: Should contain the register physical address and length for the diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt index 2569866c692f..3fac0a061bcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt @@ -36,6 +36,24 @@ listed. In other words, a subnode that lists only a mux function implies no information about any pull configuration. Similarly, a subnode that lists only a pul parameter implies no information about the mux function. +The BCM2835 pin configuration and multiplexing supports the generic bindings. +For details on each properties, you can refer to ./pinctrl-bindings.txt. + +Required sub-node properties: + - pins + - function + +Optional sub-node properties: + - bias-disable + - bias-pull-up + - bias-pull-down + - output-high + - output-low + +Legacy pin configuration and multiplexing binding: +*** (Its use is deprecated, use generic multiplexing and configuration +bindings instead) + Required subnode-properties: - brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53. diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 2c12f9789116..54ecb8ab7788 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -3,8 +3,10 @@ Required properties for the root node: - compatible: one of "amlogic,meson8-cbus-pinctrl" "amlogic,meson8b-cbus-pinctrl" + "amlogic,meson8m2-cbus-pinctrl" "amlogic,meson8-aobus-pinctrl" "amlogic,meson8b-aobus-pinctrl" + "amlogic,meson8m2-aobus-pinctrl" "amlogic,meson-gxbb-periphs-pinctrl" "amlogic,meson-gxbb-aobus-pinctrl" "amlogic,meson-gxl-periphs-pinctrl" diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index a5a8322a31bd..a677145ae6d1 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -18,7 +18,9 @@ Required properties: removed. - #gpio-cells : Should be two. - first cell is the pin number - - second cell is used to specify flags. Flags are currently unused. + - second cell is used to specify flags as described in + 'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by + 'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW). - gpio-controller : Marks the device node as a GPIO controller. - reg : For an address on its bus. I2C uses this a the I2C address of the chip. SPI uses this to specify the chipselect line which the chip is diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt index f18ed99f6e14..def8fcad8941 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt @@ -9,6 +9,16 @@ Required properties for the root node: - #gpio-cells: Should be two. The first cell is the pin number and the second is the GPIO flags. +Optional properties: +- interrupt-controller : Marks the device node as an interrupt controller + +If the property interrupt-controller is defined, following property is required +- reg-names: A string describing the "reg" entries. Must contain "eint". +- interrupts : The interrupt output from the controller. +- #interrupt-cells: Should be two. +- interrupt-parent: Phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 892d8fd7b700..abd8fbcf1e62 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -15,6 +15,7 @@ Required Properties: - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller. - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller. - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller. + - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller. - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller. - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. @@ -27,6 +28,7 @@ Required Properties: - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller. - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller. - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller. + - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller. - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller. - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index a01a3b8a2363..0919db294c17 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -20,6 +20,7 @@ defined as gpio sub-nodes of the pinmux controller. Required properties for iomux controller: - compatible: should be + "rockchip,px30-pinctrl": for Rockchip PX30 "rockchip,rv1108-pinctrl": for Rockchip RV1108 "rockchip,rk2928-pinctrl": for Rockchip RK2928 "rockchip,rk3066a-pinctrl": for Rockchip RK3066a |