diff options
Diffstat (limited to 'Documentation')
85 files changed, 2517 insertions, 654 deletions
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index 35314b63008c..caa3c09a5c3f 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -259,7 +259,7 @@ Configuring the kernel Compiling the kernel -------------------- - - Make sure you have at least gcc 4.9 available. + - Make sure you have at least gcc 5.1 available. For more information, refer to :ref:`Documentation/process/changes.rst <changes>`. Please note that you can still run a.out user programs with this kernel. diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index babbe04c8d37..4d8c27eca96b 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1226,7 +1226,7 @@ PAGE_SIZE multiple when read back. Note that all fields in this file are hierarchical and the file modified event can be generated due to an event down the - hierarchy. For for the local events at the cgroup level see + hierarchy. For the local events at the cgroup level see memory.events.local. low @@ -2170,19 +2170,19 @@ existing device files. Cgroup v2 device controller has no interface files and is implemented on top of cgroup BPF. To control access to device files, a user may -create bpf programs of the BPF_CGROUP_DEVICE type and attach them -to cgroups. On an attempt to access a device file, corresponding -BPF programs will be executed, and depending on the return value -the attempt will succeed or fail with -EPERM. - -A BPF_CGROUP_DEVICE program takes a pointer to the bpf_cgroup_dev_ctx -structure, which describes the device access attempt: access type -(mknod/read/write) and device (type, major and minor numbers). -If the program returns 0, the attempt fails with -EPERM, otherwise -it succeeds. - -An example of BPF_CGROUP_DEVICE program may be found in the kernel -source tree in the tools/testing/selftests/bpf/progs/dev_cgroup.c file. +create bpf programs of type BPF_PROG_TYPE_CGROUP_DEVICE and attach +them to cgroups with BPF_CGROUP_DEVICE flag. On an attempt to access a +device file, corresponding BPF programs will be executed, and depending +on the return value the attempt will succeed or fail with -EPERM. + +A BPF_PROG_TYPE_CGROUP_DEVICE program takes a pointer to the +bpf_cgroup_dev_ctx structure, which describes the device access attempt: +access type (mknod/read/write) and device (type, major and minor numbers). +If the program returns 0, the attempt fails with -EPERM, otherwise it +succeeds. + +An example of BPF_PROG_TYPE_CGROUP_DEVICE program may be found in +tools/testing/selftests/bpf/progs/dev_cgroup.c in the kernel source tree. RDMA diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 91ba391f9b32..43dc35fe5bc0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1266,7 +1266,7 @@ The VGA and EFI output is eventually overwritten by the real console. - The xen output can only be used by Xen PV guests. + The xen option can only be used in Xen domains. The sclp output can only be used on s390. diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst index 6979b4af2c1f..9c0e8758037a 100644 --- a/Documentation/core-api/irq/irq-domain.rst +++ b/Documentation/core-api/irq/irq-domain.rst @@ -175,9 +175,10 @@ for IRQ numbers that are passed to struct device registrations. In that case the Linux IRQ numbers cannot be dynamically assigned and the legacy mapping should be used. -As the name implies, the *_legacy() functions are deprecated and only +As the name implies, the \*_legacy() functions are deprecated and only exist to ease the support of ancient platforms. No new users should be -added. +added. Same goes for the \*_simple() functions when their use results +in the legacy behaviour. The legacy map assumes a contiguous range of IRQ numbers has already been allocated for the controller and that the IRQ number can be diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index b962fa6d649c..d79d36ac0c44 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -54,7 +54,7 @@ properties: - const: toradex,apalis_t30 - const: nvidia,tegra30 - items: - - const: toradex,apalis_t30-eval-v1.1 + - const: toradex,apalis_t30-v1.1-eval - const: toradex,apalis_t30-eval - const: toradex,apalis_t30-v1.1 - const: toradex,apalis_t30 diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index 07b20383cbca..b446d0f0f1b4 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -50,7 +50,6 @@ properties: data-lanes: description: array of physical DSI data lane indexes. minItems: 1 - maxItems: 4 items: - const: 1 - const: 2 @@ -71,7 +70,6 @@ properties: data-lanes: description: array of physical DSI data lane indexes. minItems: 1 - maxItems: 4 items: - const: 1 - const: 2 diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index 1c2daf7c24cc..911564468c5e 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -18,7 +18,7 @@ properties: const: ti,sn65dsi86 reg: - const: 0x2d + enum: [ 0x2c, 0x2d ] enable-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index fbb59c9ddda6..78044c340e20 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -9,7 +9,7 @@ function block. All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node. For a description of the MMSYS_CONFIG binding, see -Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt. +Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml. DISP function blocks ==================== diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 2ed010f91e2d..20ce88ab4b3a 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -22,7 +22,7 @@ properties: items: - enum: # ili9341 240*320 Color on stm32f429-disco board - - st,sf-tc240t-9370-t + - st,sf-tc240t-9370-t - const: ilitek,ili9341 reg: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml index 29de7807df54..bcd41e491f1d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -31,11 +31,11 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 7 clock-names: minItems: 1 - maxItems: 3 + maxItems: 7 required: - compatible @@ -72,6 +72,32 @@ allOf: contains: enum: - qcom,sdm660-a2noc + then: + properties: + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + clock-names: + items: + - const: bus + - const: bus_a + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm660-bimc - qcom,sdm660-cnoc - qcom,sdm660-gnoc @@ -91,6 +117,7 @@ examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + #include <dt-bindings/clock/qcom,gcc-sdm660.h> bimc: interconnect@1008000 { compatible = "qcom,sdm660-bimc"; @@ -123,9 +150,20 @@ examples: compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; }; mnoc: interconnect@1745000 { diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml index 3e5d82df90a2..a2abed06a099 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml index ad42992c6da3..bf115ab9d926 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml index 881f79532501..cf2ca2702cc9 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml index 1edeabf39e6a..afcf70947f7e 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index e6c9a2f77cc7..f300ced4cdf3 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -20,9 +20,7 @@ properties: - snps,dwcmshc-sdhci reg: - minItems: 1 - items: - - description: Offset and length of the register set for the device + maxItems: 1 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 7f2578d48e3f..9eb4bb529ad5 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -19,7 +19,9 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac + - enum: + - allwinner,sun20i-d1-emac + - allwinner,sun50i-h6-emac - const: allwinner,sun50i-a64-emac reg: diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 30c11fea491b..2363b412410c 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -83,7 +83,7 @@ Example: #interrupt-cells = <2>; switch0: switch@0 { - compatible = "marvell,mv88e6390"; + compatible = "marvell,mv88e6190"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 5629b2e4ccf8..ee4afe361fac 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -34,7 +34,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: MAC host clock - description: MAC apb clock diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 42689b7d03a2..c115c95ee584 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -21,6 +21,7 @@ select: contains: enum: - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a @@ -76,6 +77,7 @@ properties: - rockchip,rk3399-gmac - rockchip,rv1108-gmac - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2911e565b260..acea1cd444fd 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -41,7 +41,6 @@ properties: - description: builtin MSI controller. interrupt-names: - minItems: 1 items: - const: msi diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt deleted file mode 100644 index 2e2f6dc351c0..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ /dev/null @@ -1,134 +0,0 @@ -Qualcomm APR (Asynchronous Packet Router) binding - -This binding describes the Qualcomm APR. APR is a IPC protocol for -communication between Application processor and QDSP. APR is mainly -used for audio/voice services on the QDSP. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2" - -- qcom,apr-domain - Usage: required - Value type: <u32> - Definition: Destination processor ID. - Possible values are : - 1 - APR simulator - 2 - PC - 3 - MODEM - 4 - ADSP - 5 - APPS - 6 - MODEM2 - 7 - APPS2 - -= APR SERVICES -Each subnode of the APR node represents service tied to this apr. The name -of the nodes are not important. The properties of these nodes are defined -by the individual bindings for the specific service -- All APR services MUST contain the following property: - -- reg - Usage: required - Value type: <u32> - Definition: APR Service ID - Possible values are : - 3 - DSP Core Service - 4 - Audio Front End Service. - 5 - Voice Stream Manager Service. - 6 - Voice processing manager. - 7 - Audio Stream Manager Service. - 8 - Audio Device Manager Service. - 9 - Multimode voice manager. - 10 - Core voice stream. - 11 - Core voice processor. - 12 - Ultrasound stream manager. - 13 - Listen stream manager. - -- qcom,protection-domain - Usage: optional - Value type: <stringlist> - Definition: Must list the protection domain service name and path - that the particular apr service has a dependency on. - Possible values are : - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - -= EXAMPLE -The following example represents a QDSP based sound card on a MSM8996 device -which uses apr as communication between Apps and QDSP. - - apr { - compatible = "qcom,apr-v2"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - - dais { - #sound-dai-cells = <1>; - dai@1 { - reg = <HDMI_RX>; - }; - }; - }; - - apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - ... - }; - - apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - ... - }; - }; - -= EXAMPLE 2 -The following example represents a QDSP based sound card with protection domain -dependencies specified. Here some of the apr services are dependent on services -running on protection domain hosted on ADSP/SLPI remote processors while others -have no such dependency. - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - - apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - }; - - q6afe: apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - - q6asm: apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; - ... - }; - - q6adm: apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - ... - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml new file mode 100644 index 000000000000..028c5d105adb --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for + communication between Application processor and QDSP. APR/GPR is mainly + used for audio/voice services on the QDSP. + +properties: + compatible: + enum: + - qcom,apr-v2 + - qcom,gpr + + qcom,apr-domain: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6, 7] + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + deprecated: true + + qcom,domain: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + Selects the processor domain for gpr + 1 = Modem Domain + 2 = Audio DSP Domain + 3 = Application Processor Domain + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#APR/GPR Services +patternProperties: + "^service@[1-9a-d]$": + type: object + description: + APR/GPR node's client devices use subnodes for desired static port services. + + properties: + compatible: + enum: + - qcom,q6core + - qcom,q6asm + - qcom,q6afe + - qcom,q6adm + - qcom,q6apm + - qcom,q6prm + + reg: + minimum: 1 + maximum: 13 + description: + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: protection domain service name and path for apr service + possible values are + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^.*@[0-9a-f]+$": + type: object + description: + Service based devices like clock controllers or digital audio interfaces. + + additionalProperties: false + +required: + - compatible + - qcom,domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + }; + + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index c7613ea728d4..db7b04da0b39 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -34,6 +34,10 @@ properties: resets: maxItems: 1 + AVDD-supply: + description: + Analogue power supply. + required: - "#sound-dai-cells" - compatible @@ -41,6 +45,7 @@ required: - clocks - clock-names - resets + - AVDD-supply additionalProperties: false @@ -56,4 +61,5 @@ examples: clocks = <&clkc CLKID_AUDIO_CODEC>; clock-names = "pclk"; resets = <&reset RESET_AUDIO_CODEC>; + AVDD-supply = <&vddao_1v8>; }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml new file mode 100644 index 000000000000..f7e94b1e0e4b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-graph-card2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph Card2 Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +properties: + compatible: + enum: + - audio-graph-card2 + links: + $ref: /schemas/types.yaml#/definitions/phandle-array + label: + maxItems: 1 + routing: + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + multi: + description: Multi-CPU/Codec node + dpcm: + description: DPCM node + codec2codec: + description: Codec to Codec node + +required: + - compatible + - links + +additionalProperties: false + +examples: + - | + sound { + compatible = "audio-graph-card2"; + + links = <&cpu_port>; + }; + + cpu { + compatible = "cpu-driver"; + + cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; }; + }; + + codec { + compatible = "codec-driver"; + + port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; }; + }; diff --git a/Documentation/devicetree/bindings/sound/bt-sco.txt b/Documentation/devicetree/bindings/sound/bt-sco.txt deleted file mode 100644 index 641edf75e184..000000000000 --- a/Documentation/devicetree/bindings/sound/bt-sco.txt +++ /dev/null @@ -1,13 +0,0 @@ -Bluetooth-SCO audio CODEC - -This device support generic Bluetooth SCO link. - -Required properties: - - - compatible : "delta,dfbmcs320" or "linux,bt-sco" - -Example: - -codec: bt_sco { - compatible = "delta,dfbmcs320"; -}; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml new file mode 100644 index 000000000000..3235702ce402 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs35l41.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS35L41 Speaker Amplifier + +maintainers: + - david.rhodes@cirrus.com + +description: | + CS35L41 is a boosted mono Class D amplifier with DSP + speaker protection and equalization + +properties: + compatible: + enum: + - cirrus,cs35l40 + - cirrus,cs35l41 + + reg: + maxItems: 1 + + '#sound-dai-cells': + description: + The first cell indicating the audio interface. + const: 1 + + reset-gpios: + maxItems: 1 + + VA-supply: + description: voltage regulator phandle for the VA supply + + VP-supply: + description: voltage regulator phandle for the VP supply + + cirrus,boost-peak-milliamp: + description: + Boost-converter peak current limit in mA. + Configures the peak current by monitoring the current through the boost FET. + Range starts at 1600 mA and goes to a maximum of 4500 mA with increments + of 50 mA. See section 4.3.6 of the datasheet for details. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1600 + maximum: 4500 + default: 4500 + + cirrus,boost-ind-nanohenry: + description: + Boost inductor value, expressed in nH. Valid + values include 1000, 1200, 1500 and 2200. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1000 + maximum: 2200 + + cirrus,boost-cap-microfarad: + description: + Total equivalent boost capacitance on the VBST + and VAMP pins, derated at 11 volts DC. The value must be rounded to the + nearest integer and expressed in uF. + $ref: "/schemas/types.yaml#/definitions/uint32" + + cirrus,asp-sdout-hiz: + description: + Audio serial port SDOUT Hi-Z control. Sets the Hi-Z + configuration for SDOUT pin of amplifier. + 0 = Logic 0 during unused slots, and while all transmit channels disabled + 1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled + 2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled + 3 = Hi-Z during unused slots and while all transmit channels disabled + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 + default: 2 + + cirrus,gpio1-polarity-invert: + description: + Boolean which specifies whether the GPIO1 + level is inverted. If this property is not present the level is not inverted. + type: boolean + + cirrus,gpio1-output-enable: + description: + Boolean which specifies whether the GPIO1 pin + is configured as an output. If this property is not present the + pin will be configured as an input. + type: boolean + + cirrus,gpio1-src-select: + description: + Configures the function of the GPIO1 pin. + Note that the options are different from the GPIO2 pin + 0 = High Impedance (Default) + 1 = GPIO + 2 = Sync + 3 = MCLK input + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 + + cirrus,gpio2-polarity-invert: + description: + Boolean which specifies whether the GPIO2 + level is inverted. If this property is not present the level is not inverted. + type: boolean + + cirrus,gpio2-output-enable: + description: + Boolean which specifies whether the GPIO2 pin + is configured as an output. If this property is not present the + pin will be configured as an input. + type: boolean + + cirrus,gpio2-src-select: + description: + Configures the function of the GPIO2 pin. + Note that the options are different from the GPIO1 pin. + 0 = High Impedance (Default) + 1 = GPIO + 2 = Open Drain INTB + 3 = MCLK input + 4 = Push-pull INTB (active low) + 5 = Push-pull INT (active high) + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 5 + +required: + - compatible + - reg + - "#sound-dai-cells" + - cirrus,boost-peak-milliamp + - cirrus,boost-ind-nanohenry + - cirrus,boost-cap-microfarad + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs35l41: cs35l41@2 { + #sound-dai-cells = <1>; + compatible = "cirrus,cs35l41"; + reg = <2>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio 110 0>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt index 5d416fdaf023..3b7705623980 100644 --- a/Documentation/devicetree/bindings/sound/cs42l42.txt +++ b/Documentation/devicetree/bindings/sound/cs42l42.txt @@ -19,13 +19,14 @@ Optional properties: (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information relating to interrupt properties) - - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense - polarity. Normal jacks will short tip sense pin to HS1 when headphones are - plugged in and leave tip sense floating when not plugged in. Inverting jacks - short tip sense when unplugged and float when plugged in. + - cirrus,ts-inv : Boolean property. Sets the behaviour of the jack plug + detect switch. - 0 = (Default) Non-inverted - 1 = Inverted + 0 = (Default) Shorted to tip when unplugged, open when plugged. + This is "inverted tip sense (ITS)" in the datasheet. + + 1 = Open when unplugged, shorted to tip when plugged. + This is "normal tip sense (TS)" in the datasheet. - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no debounce, the tip sense pin might be noisy on a plug event. diff --git a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml new file mode 100644 index 000000000000..e3a1f485f664 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/linux,bt-sco.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bluetooth SCO Audio Codec Device Tree Bindings + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + '#sound-dai-cells': + enum: + - 0 + + # For Wideband PCM + - 1 + + compatible: + enum: + - delta,dfbmcs320 + - linux,bt-sco + +required: + - '#sound-dai-cells' + - compatible + +additionalProperties: false + +examples: + - | + codec { + #sound-dai-cells = <0>; + compatible = "linux,bt-sco"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml new file mode 100644 index 000000000000..c6b070e1d014 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dummy SPDIF Transmitter Device Tree Bindings + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + compatible: + const: linux,spdif-dit + + "#sound-dai-cells": + const: 0 + +required: + - "#sound-dai-cells" + - compatible + +additionalProperties: false + +examples: + - | + spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt index f6171591ddc6..98cb9ba5b328 100644 --- a/Documentation/devicetree/bindings/sound/max9892x.txt +++ b/Documentation/devicetree/bindings/sound/max9892x.txt @@ -30,6 +30,9 @@ Required properties: - reg : the I2C address of the device for I2C +Optional properties: + - reset-gpios : GPIO to reset the device + Example: codec: max98927@3a { diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml new file mode 100644 index 000000000000..b6509cb2c8e0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98520 Speaker Amplifier Driver + +maintainers: + - George Song <george.song@maximintegrated.com> + +properties: + compatible: + const: maxim,max98520 + + reg: + maxItems: 1 + description: I2C address of the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98520: amplifier@38 { + compatible = "maxim,max98520"; + reg = <0x38>; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml new file mode 100644 index 000000000000..7a25bc9b8060 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt8192-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek AFE PCM controller for mt8192 + +maintainers: + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> + +properties: + compatible: + const: mediatek,mt8192-audio + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: audiosys + + mediatek,apmixedsys: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek apmixedsys controller + + mediatek,infracfg: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek infracfg controller + + mediatek,topckgen: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek topckgen controller + + power-domains: + maxItems: 1 + + clocks: + items: + - description: AFE clock + - description: ADDA DAC clock + - description: ADDA DAC pre-distortion clock + - description: audio infra sys clock + - description: audio infra 26M clock + + clock-names: + items: + - const: aud_afe_clk + - const: aud_dac_clk + - const: aud_dac_predis_clk + - const: aud_infra_clk + - const: aud_infra_26m_clk + +required: + - compatible + - interrupts + - resets + - reset-names + - mediatek,apmixedsys + - mediatek,infracfg + - mediatek,topckgen + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8192-power.h> + #include <dt-bindings/reset/mt8192-resets.h> + + afe: mt8192-afe-pcm { + compatible = "mediatek,mt8192-audio"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + resets = <&watchdog MT8192_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,infracfg = <&infracfg>; + mediatek,topckgen = <&topckgen>; + power-domains = <&scpsys MT8192_POWER_DOMAIN_AUDIO>; + clocks = <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_DAC>, + <&audsys CLK_AUD_DAC_PREDIS>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_B>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_infra_clk", + "aud_infra_26m_clk"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml new file mode 100644 index 000000000000..d354c30d3377 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver + +maintainers: + - Trevor Wu <trevor.wu@mediatek.com> + +description: + This binding describes the MT8195 sound card with RT1011 and RT5682. + +properties: + compatible: + const: mediatek,mt8195_mt6359_rt1011_rt5682 + + mediatek,platform: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 ASoC platform. + + mediatek,dptx-codec: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 Display Port Tx codec node. + + mediatek,hdmi-codec: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8195 HDMI codec node. + +additionalProperties: false + +required: + - compatible + - mediatek,platform + +examples: + - | + + sound: mt8195-sound { + compatible = "mediatek,mt8195_mt6359_rt1011_rt5682"; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/name-prefix.txt b/Documentation/devicetree/bindings/sound/name-prefix.txt deleted file mode 100644 index 645775908657..000000000000 --- a/Documentation/devicetree/bindings/sound/name-prefix.txt +++ /dev/null @@ -1,24 +0,0 @@ -Name prefix: - -Card implementing the routing property define the connection between -audio components as list of string pair. Component using the same -sink/source names may use the name prefix property to prepend the -name of their sinks/sources with the provided string. - -Optional name prefix property: -- sound-name-prefix : string using as prefix for the sink/source names of - the component. - -Example: Two instances of the same component. - -amp0: analog-amplifier@0 { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio GPIOH_3 0>; - sound-name-prefix = "FRONT"; -}; - -amp1: analog-amplifier@1 { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio GPIOH_4 0>; - sound-name-prefix = "BACK"; -}; diff --git a/Documentation/devicetree/bindings/sound/name-prefix.yaml b/Documentation/devicetree/bindings/sound/name-prefix.yaml new file mode 100644 index 000000000000..2fe57f87ac52 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/name-prefix.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/name-prefix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Component sound name prefix + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: | + Card implementing the routing property define the connection between + audio components as list of string pair. Component using the same + sink/source names may use this property to prepend the name of their + sinks/sources with the provided string. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt new file mode 100644 index 000000000000..6c3baf7a5f21 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8821.txt @@ -0,0 +1,55 @@ +Nuvoton NAU88L21 audio codec + +This device supports I2C only. + +Required properties: + - compatible : Must be "nuvoton,nau8821" + + - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). + +Optional properties: + - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. + - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. + - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. + + - nuvoton,vref-impedance: VREF Impedance selection + 0 - Open + 1 - 25 kOhm + 2 - 125 kOhm + 3 - 2.5 kOhm + + - nuvoton,micbias-voltage: Micbias voltage level. + 0 - VDDA + 1 - VDDA + 2 - VDDA * 1.1 + 3 - VDDA * 1.2 + 4 - VDDA * 1.3 + 5 - VDDA * 1.4 + 6 - VDDA * 1.53 + 7 - VDDA * 1.53 + + - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + + - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. + + +Example: + + headset: nau8821@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + nuvoton,dmic-clk-threshold = 3072000; + }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index 5f6b37c251a8..0912d3e3fd8e 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -17,6 +17,9 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> +allOf: + - $ref: name-prefix.yaml# + properties: $nodename: pattern: "^dspk@[0-9a-f]*$" @@ -48,12 +51,6 @@ properties: sound-name-prefix: pattern: "^DSPK[1-9]$" - $ref: /schemas/types.yaml#/definitions/string - description: - Used as prefix for sink/source names of the component. Must be a - unique string among multiple instances of the same component. - The name can be "DSPK1" or "DSPKx", where x depends on the maximum - available instances on a Tegra SoC. ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml new file mode 100644 index 000000000000..c4ba12ea3611 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 ADX Device Tree Bindings + +description: | + The Audio Demultiplexer (ADX) block takes an input stream with up to + 16 channels and demultiplexes it into four output streams of up to 16 + channels each. A byte RAM helps to form output frames by any combination + of bytes from the input frame. Its design is identical to that of byte + RAM in the AMX except that the data flow direction is reversed. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^adx@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra210-adx + - items: + - enum: + - nvidia,tegra194-adx + - nvidia,tegra186-adx + - const: nvidia,tegra210-adx + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^ADX[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + ADX has one input and four outputs. Accordingly ACIF (Audio Client + Interface) port nodes are defined to represent ADX input (port 0) + and outputs (ports 1 to 4). These are connected to corresponding + ports on AHUB (Audio Hub). + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ADX ACIF input port + patternProperties: + '^port@[1-4]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ADX ACIF output ports + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + adx@702d3800 { + compatible = "nvidia,tegra210-adx"; + reg = <0x702d3800 0x100>; + sound-name-prefix = "ADX1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 1118a9488345..df81d208184a 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -85,6 +85,26 @@ patternProperties: type: object $ref: nvidia,tegra186-dspk.yaml# + '^mvc@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-mvc.yaml# + + '^sfc@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-sfc.yaml# + + '^amx@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-amx.yaml# + + '^adx@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-adx.yaml# + + '^amixer@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-mixer.yaml# + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml new file mode 100644 index 000000000000..bb2111afe5a8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 AMX Device Tree Bindings + +description: | + The Audio Multiplexer (AMX) block can multiplex up to four input streams + each of which can have maximum 16 channels and generate an output stream + with maximum 16 channels. A byte RAM helps to form an output frame by + any combination of bytes from the input frames. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^amx@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra210-amx + - items: + - const: nvidia,tegra186-amx + - const: nvidia,tegra210-amx + - const: nvidia,tegra194-amx + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^AMX[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + AMX has four inputs and one output. Accordingly ACIF (Audio Client + Interfaces) port nodes are defined to represent AMX inputs (port 0 + to 3) and output (port 4). These are connected to corresponding + ports on AHUB (Audio Hub). + + patternProperties: + '^port@[0-3]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: AMX ACIF input ports + + properties: + port@4: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: AMX ACIF output port + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + amx@702d3000 { + compatible = "nvidia,tegra210-amx"; + reg = <0x702d3000 0x100>; + sound-name-prefix = "AMX1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index fd275a575055..62db982bb01d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -16,6 +16,9 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> +allOf: + - $ref: name-prefix.yaml# + properties: $nodename: pattern: "^dmic@[0-9a-f]*$" @@ -49,12 +52,6 @@ properties: sound-name-prefix: pattern: "^DMIC[1-9]$" - $ref: /schemas/types.yaml#/definitions/string - description: - used as prefix for sink/source names of the component. Must be a - unique string among multiple instances of the same component. - The name can be "DMIC1" or "DMIC2" ... "DMICx", where x depends - on the maximum available instances on a Tegra SoC. ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 63370709c768..f954be636697 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -16,6 +16,9 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> +allOf: + - $ref: name-prefix.yaml# + properties: $nodename: pattern: "^i2s@[0-9a-f]*$" @@ -65,12 +68,6 @@ properties: sound-name-prefix: pattern: "^I2S[1-9]$" - $ref: /schemas/types.yaml#/definitions/string - description: - Used as prefix for sink/source names of the component. Must be a - unique string among multiple instances of the same component. - The name can be "I2S1" or "I2S2" ... "I2Sx", where x depends - on the maximum available instances on a Tegra SoC. ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml new file mode 100644 index 000000000000..428f3c851941 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 Mixer Device Tree Bindings + +description: | + The Mixer supports mixing of up to ten 7.1 audio input streams and + generate five outputs (each of which can be any combination of the + ten input streams). + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^amixer@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra210-amixer + - items: + - enum: + - nvidia,tegra194-amixer + - nvidia,tegra186-amixer + - const: nvidia,tegra210-amixer + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^MIXER[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Mixer has ten inputs and five outputs. Accordingly ACIF (Audio + Client Interfaces) port nodes are defined to represent Mixer + inputs (port 0 to 9) and outputs (port 10 to 14). These are + connected to corresponding ports on AHUB (Audio Hub). + + patternProperties: + '^port@[0-9]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: Mixer ACIF input ports + '^port@[10-14]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: Mixer ACIF output ports + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + amixer@702dbb00 { + compatible = "nvidia,tegra210-amixer"; + reg = <0x702dbb00 0x800>; + sound-name-prefix = "MIXER1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml new file mode 100644 index 000000000000..e2f5a8591d8f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 MVC Device Tree Bindings + +description: | + The Master Volume Control (MVC) provides gain or attenuation to a digital + signal path. It can be used in input or output signal path for per-stream + volume control or it can be used as master volume control. The MVC block + has one input and one output. The input digital stream can be mono or + multi-channel (up to 7.1 channels) stream. An independent mute control is + also included in the MVC block. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^mvc@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra210-mvc + - items: + - enum: + - nvidia,tegra194-mvc + - nvidia,tegra186-mvc + - const: nvidia,tegra210-mvc + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^MVC[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: | + MVC ACIF (Audio Client Interface) input port. This is connected + to corresponding ACIF output port on AHUB (Audio Hub). + + port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: | + MVC ACIF output port. This is connected to corresponding ACIF + input port on AHUB. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + mvc@702da000 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da000 0x200>; + sound-name-prefix = "MVC1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml new file mode 100644 index 000000000000..41ad65173548 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 SFC Device Tree Bindings + +description: | + The Sampling Frequency Converter (SFC) converts the sampling frequency + of the input signal from one frequency to another. It supports sampling + frequency conversions of streams of up to two channels (stereo). + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^sfc@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra210-sfc + - items: + - enum: + - nvidia,tegra194-sfc + - nvidia,tegra186-sfc + - const: nvidia,tegra210-sfc + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^SFC[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: | + SFC ACIF (Audio Client Interface) input port. This is connected + to corresponding ACIF output port on AHUB (Audio Hub). + + port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: | + SFC ACIF output port. This is connected to corresponding ACIF + input port on AHUB. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + sfc@702d2000 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2000 0x200>; + sound-name-prefix = "SFC1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml index ffb8fcfeb629..7667471be1e4 100644 --- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml @@ -9,6 +9,9 @@ title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers maintainers: - Stephan Gerhold <stephan@gerhold.net> +allOf: + - $ref: name-prefix.yaml# + properties: compatible: enum: @@ -21,11 +24,7 @@ properties: '#sound-dai-cells': const: 0 - sound-name-prefix: - $ref: /schemas/types.yaml#/definitions/string - description: - Used as prefix for sink/source names of the component. Must be a - unique string among multiple instances of the same component. + sound-name-prefix: true vddd-supply: description: regulator phandle for the VDDD power supply. diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 443d556caa69..bc762b39c68a 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: qcom,sm8250-lpass-rx-macro + enum: + - qcom,sc7280-lpass-rx-macro + - qcom,sm8250-lpass-rx-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 6b5ca02ccce4..74f53864e7a7 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: qcom,sm8250-lpass-tx-macro + enum: + - qcom,sc7280-lpass-tx-macro + - qcom,sm8250-lpass-tx-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 679b49cbe30f..99f2c3687fbd 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: qcom,sm8250-lpass-va-macro + enum: + - qcom,sc7280-lpass-va-macro + - qcom,sm8250-lpass-va-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 435b019a1e3d..13cdb8a10687 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: qcom,sm8250-lpass-wsa-macro + enum: + - qcom,sc7280-lpass-wsa-macro + - qcom,sm8250-lpass-wsa-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index 2d6fb2ea75a0..bc6b5f1fe4f1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -12,190 +12,9 @@ used by all apr services. Must contain the following properties. from DSP. example "qcom,q6afe" -= AFE DAIs (Digial Audio Interface) -"dais" subnode of the AFE node. It represents afe dais, each afe dai is a -subnode of "dais" representing board specific dai setup. -"dais" node should have following properties followed by dai children. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6afe-dais" - -- #sound-dai-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -- #address-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -- #size-cells - Usage: required - Value type: <u32> - Definition: Must be 0 - -== AFE DAI is subnode of "dais" and represent a dai, it includes board specific -configuration of each dai. Must contain the following properties. - -- reg - Usage: required - Value type: <u32> - Definition: Must be dai id - -- qcom,sd-lines - Usage: required for mi2s interface - Value type: <prop-encoded-array> - Definition: Must be list of serial data lines used by this dai. - should be one or more of the 0-3 sd lines. - - - qcom,tdm-sync-mode: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Synchronization mode. - 0 - Short sync bit mode - 1 - Long sync mode - 2 - Short sync slot mode - - - qcom,tdm-sync-src: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Synchronization source. - 0 - External source - 1 - Internal source - - - qcom,tdm-data-out: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Data out signal to drive with other masters. - 0 - Disable - 1 - Enable - - - qcom,tdm-invert-sync: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Invert the sync. - 0 - Normal - 1 - Invert - - - qcom,tdm-data-delay: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Number of bit clock to delay data - with respect to sync edge. - 0 - 0 bit clock cycle - 1 - 1 bit clock cycle - 2 - 2 bit clock cycle - - - qcom,tdm-data-align: - Usage: required for tdm interface - Value type: <prop-encoded-array> - Definition: Indicate how data is packed - within the slot. For example, 32 slot width in case of - sample bit width is 24. - 0 - MSB - 1 - LSB - -= AFE CLOCKSS -"clocks" subnode of the AFE node. It represents q6afe clocks -"clocks" node should have following properties. -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6afe-clocks" - -- #clock-cells: - Usage: required - Value type: <u32> - Definition: Must be 2. Clock Id followed by - below valid clock coupling attributes. - 1 - for no coupled clock - 2 - for dividend of the coupled clock - 3 - for divisor of the coupled clock - 4 - for inverted and no couple clock - = EXAMPLE apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; - - dais { - compatible = "qcom,q6afe-dais"; - #sound-dai-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dai@1 { - reg = <HDMI_RX>; - }; - - dai@24 { - reg = <PRIMARY_TDM_RX_0>; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay = <1>; - qcom,tdm-data-align = <0>; - - }; - - dai@25 { - reg = <PRIMARY_TDM_TX_0>; - qcom,tdm-sync-mode = <1>: - qcom,tdm-sync-src = <1>; - qcom,tdm-data-out = <0>; - qcom,tdm-invert-sync = <1>; - qcom,tdm-data-delay <1>: - qcom,tdm-data-align = <0>; - }; - - dai@16 { - reg = <PRIMARY_MI2S_RX>; - qcom,sd-lines = <0 2>; - }; - - dai@17 { - reg = <PRIMARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - - dai@18 { - reg = <SECONDARY_MI2S_RX>; - qcom,sd-lines = <0 3>; - }; - - dai@19 { - reg = <SECONDARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - - dai@20 { - reg = <TERTIARY_MI2S_RX>; - qcom,sd-lines = <1 3>; - }; - - dai@21 { - reg = <TERTIARY_MI2S_TX>; - qcom,sd-lines = <0>; - }; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0>; - }; - - dai@23 { - reg = <QUATERNARY_MI2S_TX>; - qcom,sd-lines = <1>; - }; - }; - - clocks { - compatible = "qcom,q6afe-clocks"; - #clock-cells = <2>; - }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml new file mode 100644 index 000000000000..5d972784321d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Audio Process Manager Digital Audio Interfaces binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APM DAIs in DSP + +properties: + compatible: + const: qcom,q6apm-dais + + reg: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - iommus + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + #address-cells = <1>; + #size-cells = <0>; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + service@1 { + compatible = "qcom,q6apm"; + reg = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + apm-dai@1 { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index 8c4883becae9..0d0075125243 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -14,7 +14,7 @@ used by the apr service device. from DSP. example "qcom,q6asm-v2.0" -= ASM DAIs (Digial Audio Interface) += ASM DAIs (Digital Audio Interface) "dais" subnode of the ASM node represents dai specific configuration - compatible: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml new file mode 100644 index 000000000000..f83f00737a2f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm DSP LPASS Clock Controller binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm DSP Clock Controller + +properties: + compatible: + enum: + - qcom,q6afe-clocks + - qcom,q6prm-lpass-clocks + + reg: + maxItems: 1 + + '#clock-cells': + const: 2 + description: + Clock Id is followed by clock coupling attributes. + 1 = for no coupled clock + 2 = for dividend of the coupled clock + 3 = for divisor of the coupled clock + 4 = for inverted and no couple clock + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6afe.h> + apr { + #address-cells = <1>; + #size-cells = <0>; + apr-service@4 { + reg = <APR_SVC_AFE>; + #address-cells = <1>; + #size-cells = <0>; + clock-controller@2 { + compatible = "qcom,q6afe-clocks"; + reg = <2>; + #clock-cells = <2>; + }; + }; + }; + + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + service@2 { + reg = <GPR_PRM_MODULE_IID>; + compatible = "qcom,q6prm"; + #address-cells = <1>; + #size-cells = <0>; + clock-controller@2 { + compatible = "qcom,q6prm-lpass-clocks"; + reg = <2>; + #clock-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml new file mode 100644 index 000000000000..dc7fba7b92d5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm DSP LPASS Audio ports + +properties: + compatible: + enum: + - qcom,q6afe-dais + - qcom,q6apm-lpass-dais + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +#Digital Audio Interfaces +patternProperties: + '^dai@[0-9]+$': + type: object + description: + Q6DSP Digital Audio Interfaces. + + properties: + reg: + description: + Digital Audio Interface ID + + qcom,sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + List of serial data lines used by this dai.should be one or more of the 0-3 sd lines. + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + minimum: 0 + maximum: 3 + + qcom,tdm-sync-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Synchronization mode + 0 = Short sync bit mode + 1 = Long sync mode + 2 = Short sync slot mode + + qcom,tdm-sync-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Synchronization source + 0 = External source + 1 = Internal source + + qcom,tdm-data-out: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Data out signal to drive with other masters + 0 = Disable + 1 = Enable + + qcom,tdm-invert-sync: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + TDM Invert the sync + 0 = Normal + 1 = Invert + + qcom,tdm-data-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + TDM Number of bit clock to delay data + 0 = 0 bit clock cycle + 1 = 1 bit clock cycle + 2 = 2 bit clock cycle + + qcom,tdm-data-align: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicate how data is packed within the slot. For example, 32 slot + width in case of sample bit width is 24TDM Invert the sync. + 0 = MSB + 1 = LSB + + required: + - reg + + allOf: + - if: + properties: + reg: + contains: + # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7 + items: + minimum: 24 + maximum: 103 + then: + required: + - qcom,tdm-sync-mode + - qcom,tdm-sync-src + - qcom,tdm-data-out + - qcom,tdm-invert-sync + - qcom,tdm-data-delay + - qcom,tdm-data-align + + - if: + properties: + reg: + contains: + # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and + # QUINARY_MI2S_RX - QUINARY_MI2S_TX + items: + oneOf: + - minimum: 16 + maximum: 23 + - minimum: 127 + maximum: 128 + then: + required: + - qcom,sd-lines + + additionalProperties: false + +required: + - compatible + - reg + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6afe.h> + apr { + #address-cells = <1>; + #size-cells = <0>; + apr-service@4 { + reg = <APR_SVC_AFE>; + #address-cells = <1>; + #size-cells = <0>; + q6afedai@1 { + compatible = "qcom,q6afe-dais"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + #address-cells = <1>; + #size-cells = <0>; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #address-cells = <1>; + #size-cells = <0>; + q6apmdai@1 { + compatible = "qcom,q6apm-lpass-dais"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml new file mode 100644 index 000000000000..2b8b7b51fe55 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt5682s codec devicetree bindings + +maintainers: + - Derek Fang <derek.fang@realtek.com> + +description: | + Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only. + +properties: + compatible: + const: realtek,rt5682s + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + description: The CODEC's interrupt output. + + realtek,dmic1-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 data is not used + - 1 # using GPIO2 pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + description: | + Specify which GPIO pin be used as DMIC1 data pin. + + realtek,dmic1-clk-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 clk is not used + - 1 # using GPIO1 pin as dmic1 clock pin + - 2 # using GPIO3 pin as dmic1 clock pin + description: | + Specify which GPIO pin be used as DMIC1 clk pin. + + realtek,jd-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # No JD is used + - 1 # using JD1 as JD source + description: | + Specify which JD source be used. + + realtek,ldo1-en-gpios: + description: | + The GPIO that controls the CODEC's LDO1_EN pin. + + realtek,dmic-clk-rate-hz: + description: | + Set the clock rate (hz) for the requirement of the particular DMIC. + + realtek,dmic-delay-ms: + description: | + Set the delay time (ms) for the requirement of the particular DMIC. + + realtek,dmic-clk-driving-high: + type: boolean + description: | + Set the high driving of the DMIC clock out. + + clocks: + items: + - description: phandle and clock specifier for codec MCLK. + + clock-names: + items: + - const: mclk + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: Name given for DAI word clock and bit clock outputs. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + + #clock-cells = <1>; + clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; + + clocks = <&osc>; + clock-names = "mclk"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml new file mode 100644 index 000000000000..5655ca568240 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9120 Class-D audio amplifier + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier + delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input + voltage range from 4.5V to 26.4V to meet the need on most common + applications like as TV, monitors. home entertainment, electronic music + equipment. + +properties: + compatible: + enum: + - richtek,rt9120 + + reg: + description: I2C device address + maxItems: 1 + + pwdnn-gpios: + description: GPIO used for power down, low active + maxItems: 1 + + dvdd-supply: + description: | + Supply for the default on DVDD power, voltage domain must be 3P3V or 1P8V + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - dvdd-supply + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + rt9120@1a { + compatible = "richtek,rt9120"; + reg = <0x1a>; + pwdnn-gpios = <&gpio26 2 0>; + dvdd-supply = <&vdd_io_reg>; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml new file mode 100644 index 000000000000..6a7c004bef17 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip I2S/TDM Controller + +description: + The Rockchip I2S/TDM Controller is a Time Division Multiplexed + audio interface found in various Rockchip SoCs, allowing up + to 8 channels of audio over a serial interface. + +maintainers: + - Nicolas Frattaroli <frattaroli.nicolas@gmail.com> + +properties: + compatible: + enum: + - rockchip,px30-i2s-tdm + - rockchip,rk1808-i2s-tdm + - rockchip,rk3308-i2s-tdm + - rockchip,rk3568-i2s-tdm + - rockchip,rv1126-i2s-tdm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + maxItems: 2 + items: + enum: + - rx + - tx + + clocks: + minItems: 3 + items: + - description: clock for TX + - description: clock for RX + - description: AHB clock driving the interface + - description: + Parent clock for mclk_tx (only required when using mclk-calibrate) + - description: + Parent clock for mclk_rx (only required when using mclk-calibrate) + - description: + Clock for sample rates that are an integer multiple of 8000 + (only required when using mclk-calibrate) + - description: + Clock for sample rates that are an integer multiple of 11025 + (only required when using mclk-calibrate) + + clock-names: + minItems: 3 + items: + - const: mclk_tx + - const: mclk_rx + - const: hclk + - const: mclk_tx_src + - const: mclk_rx_src + - const: mclk_root0 + - const: mclk_root1 + + resets: + minItems: 1 + maxItems: 2 + description: resets for the tx and rx directions + + reset-names: + minItems: 1 + maxItems: 2 + items: + enum: + - tx-m + - rx-m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + + rockchip,trcm-sync-tx-only: + type: boolean + description: Use TX BCLK/LRCK for both TX and RX. + + rockchip,trcm-sync-rx-only: + type: boolean + description: Use RX BCLK/LRCK for both TX and RX. + + "#sound-dai-cells": + const: 0 + + rockchip,i2s-rx-route: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Defines the mapping of I2S RX sdis to I2S data bus lines. + By default, they are mapped one-to-one. + rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0. + maxItems: 4 + items: + enum: [0, 1, 2, 3] + + rockchip,i2s-tx-route: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Defines the mapping of I2S TX sdos to I2S data bus lines. + By default, they are mapped one-to-one. + rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0. + maxItems: 4 + items: + enum: [0, 1, 2, 3] + + rockchip,io-multiplex: + description: + Specify that the GPIO lines on the I2S bus are multiplexed such that + the direction (input/output) needs to be dynamically adjusted. + type: boolean + + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + - resets + - reset-names + - rockchip,grf + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + i2s@fe410000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe410000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, + <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 3>, <&dmac1 2>; + dma-names = "rx", "tx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = + <&i2s1m0_sclktx + &i2s1m0_sclkrx + &i2s1m0_lrcktx + &i2s1m0_lrckrx + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt deleted file mode 100644 index 98572a25122f..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Rockchip PDM controller - -Required properties: - -- compatible: "rockchip,pdm" - - "rockchip,px30-pdm" - - "rockchip,rk1808-pdm" - - "rockchip,rk3308-pdm" -- reg: physical base address of the controller and length of memory mapped - region. -- dmas: DMA specifiers for rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain following: - - "pdm_hclk": clock for PDM BUS - - "pdm_clk" : clock for PDM controller -- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names. -- reset-names: reset names, should include "pdm-m". -- pinctrl-names: Must contain a "default" entry. -- pinctrl-N: One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. - -Example for rk3328 PDM controller: - -pdm: pdm@ff040000 { - compatible = "rockchip,pdm"; - reg = <0x0 0xff040000 0x0 0x1000>; - clocks = <&clk_pdm>, <&clk_gates28 0>; - clock-names = "pdm_clk", "pdm_hclk"; - dmas = <&pdma 16>; - #dma-cells = <1>; - dma-names = "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pdmm0_clk - &pdmm0_sdi0 - &pdmm0_sdi1 - &pdmm0_sdi2 - &pdmm0_sdi3>; - pinctrl-1 = <&pdmm0_clk_sleep - &pdmm0_sdi0_sleep - &pdmm0_sdi1_sleep - &pdmm0_sdi2_sleep - &pdmm0_sdi3_sleep>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml new file mode 100644 index 000000000000..22e1cf6c0592 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,pdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PDM controller + +description: + The Pulse Density Modulation Interface Controller (PDMC) is + a PDM interface controller and decoder that support PDM format. + It integrates a clock generator driving the PDM microphone + and embeds filters which decimate the incoming bit stream to + obtain most common audio rates. + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,pdm + - rockchip,px30-pdm + - rockchip,rk1808-pdm + - rockchip,rk3308-pdm + - rockchip,rk3568-pdm + - rockchip,rv1126-pdm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for PDM controller + - description: clock for PDM BUS + + clock-names: + items: + - const: pdm_clk + - const: pdm_hclk + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + power-domains: + maxItems: 1 + + resets: + items: + - description: reset for PDM controller + + reset-names: + items: + - const: pdm-m + + rockchip,path-map: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Defines the mapping of PDM SDIx to PDM PATHx. + By default, they are mapped one-to-one. + maxItems: 4 + uniqueItems: true + items: + enum: [ 0, 1, 2, 3 ] + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3328-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pdm@ff040000 { + compatible = "rockchip,pdm"; + reg = <0x0 0xff040000 0x0 0x1000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>; + clock-names = "pdm_clk", "pdm_hclk"; + dmas = <&dmac 16>; + dma-names = "rx"; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pdmm0_clk + &pdmm0_sdi0 + &pdmm0_sdi1 + &pdmm0_sdi2 + &pdmm0_sdi3>; + pinctrl-1 = <&pdmm0_clk_sleep + &pdmm0_sdi0_sleep + &pdmm0_sdi1_sleep + &pdmm0_sdi2_sleep + &pdmm0_sdi3_sleep>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index c473df5c878c..013f534fa059 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -42,7 +42,7 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. -- sound-name-prefix: Please refer to name-prefix.txt +- sound-name-prefix: Please refer to name-prefix.yaml - ports: A Codec may have a single or multiple I2S interfaces. These interfaces on Codec side can be described under 'ports' or 'port'. diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt deleted file mode 100644 index b1b097cc9b68..000000000000 --- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt +++ /dev/null @@ -1,17 +0,0 @@ -Simple Amplifier Audio Driver - -Required properties: -- compatible : "dioo,dio2125" or "simple-audio-amplifier" - -Optional properties: -- enable-gpios : the gpio connected to the enable pin of the simple amplifier -- VCC-supply : power supply for the device, as covered - in Documentation/devicetree/bindings/regulator/regulator.txt - -Example: - -amp: analog-amplifier { - compatible = "simple-audio-amplifier"; - VCC-supply = <®ulator>; - enable-gpios = <&gpio GPIOH_3 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml new file mode 100644 index 000000000000..26379377a7ac --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Audio Amplifier Device Tree Bindings + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + enum: + - dioo,dio2125 + - simple-audio-amplifier + + enable-gpios: + maxItems: 1 + + VCC-supply: + description: > + power supply for the device + + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: > + See ./name-prefix.txt + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/meson8-gpio.h> + + analog-amplifier { + compatible = "simple-audio-amplifier"; + VCC-supply = <®ulator>; + enable-gpios = <&gpio GPIOH_3 0>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml index 5986d1fcbb54..b5fc35ee9b65 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -13,6 +13,9 @@ description: | Simple audio multiplexers are driven using gpios, allowing to select which of their input line is connected to the output line. +allOf: + - $ref: name-prefix.yaml# + properties: compatible: const: simple-audio-mux @@ -21,11 +24,7 @@ properties: description: | GPIOs used to select the input line. - sound-name-prefix: - $ref: /schemas/types.yaml#/definitions/string - description: - Used as prefix for sink/source names of the component. Must be a - unique string among multiple instances of the same component. + sound-name-prefix: true required: - compatible diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml index 55ae198220f4..70f62ecd6eb2 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -46,7 +46,27 @@ properties: patternProperties: "^port@[0-9]$": - description: FIXME, Need to define what each port is. + description: | + Port number of DT node is specified by the following DAI channels that + depends on SoC. + ld11-aio,ld20-aio: + 0: hdmi + 1: pcmin2 + 2: line + 3: hpcmout1 + 4: pcmout3 + 5: hiecout1 + 6: epcmout2 + 7: epcmout3 + 8: hieccompout1 + pxs2-aio: + 0: hdmi + 1: line + 2: aux + 3: hiecout1 + 4: iecout1 + 5: hieccompout1 + 6: ieccompout1 $ref: audio-graph-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml index 48ddfcbbcbae..be6acfda9999 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml @@ -40,7 +40,11 @@ properties: patternProperties: "^port@[0-9]$": - description: FIXME, Need to define what each port is. + description: | + Port number of DT node is specified by the following DAI channels. + 0: line1 + 1: hp + 2: line2 $ref: audio-graph-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt b/Documentation/devicetree/bindings/sound/spdif-transmitter.txt deleted file mode 100644 index 55a85841dd85..000000000000 --- a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt +++ /dev/null @@ -1,10 +0,0 @@ -Device-Tree bindings for dummy spdif transmitter - -Required properties: - - compatible: should be "linux,spdif-dit". - -Example node: - - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - }; diff --git a/Documentation/devicetree/bindings/sound/test-component.yaml b/Documentation/devicetree/bindings/sound/test-component.yaml new file mode 100644 index 000000000000..17fdb4317239 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/test-component.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/test-component.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Test Component Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +properties: + compatible: + enum: + - test-cpu + - test-cpu-verbose + - test-cpu-verbose-dai + - test-cpu-verbose-component + - test-codec + - test-codec-verbose + - test-codec-verbose-dai + - test-codec-verbose-component + +required: + - compatible + +additionalProperties: true + +examples: + - | + test_cpu { + compatible = "test-cpu"; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml new file mode 100644 index 000000000000..0e6249d7c133 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8962.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8962 Ultra-Low Power Stereo CODEC + +maintainers: + - patches@opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8962 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + AVDD-supply: + description: Analogue supply. + + CPVDD-supply: + description: Charge pump power supply. + + DBVDD-supply: + description: Digital Buffer Supply. + + DCVDD-supply: + description: Digital Core Supply. + + MICVDD-supply: + description: Microphone bias amp supply. + + PLLVDD-supply: + description: PLL Supply + + SPKVDD1-supply: + description: Supply for left speaker drivers. + + SPKVDD2-supply: + description: Supply for right speaker drivers. + + spk-mono: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, the SPK_MONO bit of R51 (Class D Control 2) gets set, + indicating that the speaker is in mono mode. + + mic-cfg: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default register value for R48 (Additional Control 4). + If absent, the default should be the register default. + + gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + description: + A list of GPIO configuration register values. If absent, no + configuration of these registers is performed. Note that only values + within [0x0, 0xffff] are valid. Any other value is regarded as setting + the GPIO register to its reset value 0x0. + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - AVDD-supply + - CPVDD-supply + - DBVDD-supply + - DCVDD-supply + - MICVDD-supply + - PLLVDD-supply + - SPKVDD1-supply + - SPKVDD2-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + wm8962: codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml new file mode 100644 index 000000000000..96cf9fc9c8b0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8978.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8978 Codec Device Tree Bindings + +maintainers: + - patches@opensource.cirrus.com + +properties: + '#sound-dai-cells': + const: 0 + + compatible: + const: wlf,wm8978 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 526000 + +required: + - '#sound-dai-cells' + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + codec@0 { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0>; + spi-max-frequency = <500000>; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt deleted file mode 100644 index c36c649ddfd0..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8962.txt +++ /dev/null @@ -1,43 +0,0 @@ -WM8962 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8962" - - - reg : the I2C address of the device. - -Optional properties: - - - clocks : The clock source of the mclk - - - spk-mono: This is a boolean property. If present, the SPK_MONO bit - of R51 (Class D Control 2) gets set, indicating that the speaker is - in mono mode. - - - mic-cfg : Default register value for R48 (Additional Control 4). - If absent, the default should be the register default. - - - gpio-cfg : A list of GPIO configuration register values. The list must - be 6 entries long. If absent, no configuration of these registers is - performed. And note that only the value within [0x0, 0xffff] is valid. - Any other value is regarded as setting the GPIO register by its reset - value 0x0. - -Example: - -wm8962: codec@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6QDL_CLK_CKO>; - - gpio-cfg = < - 0x0000 /* 0:Default */ - 0x0000 /* 1:Default */ - 0x0013 /* 2:FN_DMICCLK */ - 0x0000 /* 3:Default */ - 0x8014 /* 4:FN_DMICCDAT */ - 0x0000 /* 5:Default */ - >; -}; diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index ca91201a9926..d7e08b03e204 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -171,7 +171,7 @@ examples: cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; rx-sample-delay-ns = <3>; - spi-flash@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; rx-sample-delay-ns = <7>; diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml new file mode 100644 index 000000000000..b9ca8ef4f2be --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series UFS host controller Device Tree Bindings + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + +description: | + Each Samsung UFS host controller instance should have its own node. + This binding define Samsung specific binding other then what is used + in the common ufshcd bindings + [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt + +properties: + + compatible: + enum: + - samsung,exynos7-ufs + + reg: + items: + - description: HCI register + - description: vendor specific register + - description: unipro register + - description: UFS protector register + + reg-names: + items: + - const: hci + - const: vs_hci + - const: unipro + - const: ufsp + + clocks: + items: + - description: ufs link core clock + - description: unipro main clock + + clock-names: + items: + - const: core_clk + - const: sclk_unipro_main + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: ufs-phy + +required: + - compatible + - reg + - interrupts + - phys + - phy-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/exynos7-clk.h> + + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, + <0x15570100 0x100>, + <0x15571000 0x200>, + <0x15572000 0x300>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + }; +... diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst index ffe9ea0c1499..d67ccd22c63b 100644 --- a/Documentation/filesystems/ntfs3.rst +++ b/Documentation/filesystems/ntfs3.rst @@ -4,103 +4,112 @@ NTFS3 ===== - Summary and Features ==================== -NTFS3 is fully functional NTFS Read-Write driver. The driver works with -NTFS versions up to 3.1, normal/compressed/sparse files -and journal replaying. File system type to use on mount is 'ntfs3'. +NTFS3 is fully functional NTFS Read-Write driver. The driver works with NTFS +versions up to 3.1. File system type to use on mount is *ntfs3*. - This driver implements NTFS read/write support for normal, sparse and compressed files. -- Supports native journal replaying; -- Supports extended attributes - Predefined extended attributes: - - 'system.ntfs_security' gets/sets security - descriptor (SECURITY_DESCRIPTOR_RELATIVE) - - 'system.ntfs_attrib' gets/sets ntfs file/dir attributes. - Note: applied to empty files, this allows to switch type between - sparse(0x200), compressed(0x800) and normal; +- Supports native journal replaying. - Supports NFS export of mounted NTFS volumes. +- Supports extended attributes. Predefined extended attributes: + + - *system.ntfs_security* gets/sets security + + Descriptor: SECURITY_DESCRIPTOR_RELATIVE + + - *system.ntfs_attrib* gets/sets ntfs file/dir attributes. + + Note: Applied to empty files, this allows to switch type between + sparse(0x200), compressed(0x800) and normal. Mount Options ============= The list below describes mount options supported by NTFS3 driver in addition to -generic ones. +generic ones. You can use every mount option with **no** option. If it is in +this table marked with no it means default is without **no**. -=============================================================================== +.. flat-table:: + :widths: 1 5 + :fill-cells: -nls=name This option informs the driver how to interpret path - strings and translate them to Unicode and back. If - this option is not set, the default codepage will be - used (CONFIG_NLS_DEFAULT). - Examples: - 'nls=utf8' + * - iocharset=name + - This option informs the driver how to interpret path strings and + translate them to Unicode and back. If this option is not set, the + default codepage will be used (CONFIG_NLS_DEFAULT). -uid= -gid= -umask= Controls the default permissions for files/directories created - after the NTFS volume is mounted. + Example: iocharset=utf8 -fmask= -dmask= Instead of specifying umask which applies both to - files and directories, fmask applies only to files and - dmask only to directories. + * - uid= + - :rspan:`1` + * - gid= -nohidden Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) - attribute will not be shown under Linux. + * - umask= + - Controls the default permissions for files/directories created after + the NTFS volume is mounted. -sys_immutable Files with the Windows-specific SYSTEM - (FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system - immutable files. + * - dmask= + - :rspan:`1` Instead of specifying umask which applies both to files and + directories, fmask applies only to files and dmask only to directories. + * - fmask= -discard Enable support of the TRIM command for improved performance - on delete operations, which is recommended for use with the - solid-state drives (SSD). + * - noacsrules + - "No access rules" mount option sets access rights for files/folders to + 777 and owner/group to root. This mount option absorbs all other + permissions. -force Forces the driver to mount partitions even if 'dirty' flag - (volume dirty) is set. Not recommended for use. + - Permissions change for files/folders will be reported as successful, + but they will remain 777. -sparse Create new files as "sparse". + - Owner/group change will be reported as successful, butthey will stay + as root. -showmeta Use this parameter to show all meta-files (System Files) on - a mounted NTFS partition. - By default, all meta-files are hidden. + * - nohidden + - Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) attribute + will not be shown under Linux. -prealloc Preallocate space for files excessively when file size is - increasing on writes. Decreases fragmentation in case of - parallel write operations to different files. + * - sys_immutable + - Files with the Windows-specific SYSTEM (FILE_ATTRIBUTE_SYSTEM) attribute + will be marked as system immutable files. -no_acs_rules "No access rules" mount option sets access rights for - files/folders to 777 and owner/group to root. This mount - option absorbs all other permissions: - - permissions change for files/folders will be reported - as successful, but they will remain 777; - - owner/group change will be reported as successful, but - they will stay as root + * - discard + - Enable support of the TRIM command for improved performance on delete + operations, which is recommended for use with the solid-state drives + (SSD). -acl Support POSIX ACLs (Access Control Lists). Effective if - supported by Kernel. Not to be confused with NTFS ACLs. - The option specified as acl enables support for POSIX ACLs. + * - force + - Forces the driver to mount partitions even if volume is marked dirty. + Not recommended for use. -noatime All files and directories will not update their last access - time attribute if a partition is mounted with this parameter. - This option can speed up file system operation. + * - sparse + - Create new files as sparse. -=============================================================================== + * - showmeta + - Use this parameter to show all meta-files (System Files) on a mounted + NTFS partition. By default, all meta-files are hidden. -ToDo list -========= + * - prealloc + - Preallocate space for files excessively when file size is increasing on + writes. Decreases fragmentation in case of parallel write operations to + different files. -- Full journaling support (currently journal replaying is supported) over JBD. + * - acl + - Support POSIX ACLs (Access Control Lists). Effective if supported by + Kernel. Not to be confused with NTFS ACLs. The option specified as acl + enables support for POSIX ACLs. +Todo list +========= +- Full journaling support over JBD. Currently journal replaying is supported + which is not necessarily as effectice as JBD would be. References ========== -https://www.paragon-software.com/home/ntfs-linux-professional/ - - Commercial version of the NTFS driver for Linux. +- Commercial version of the NTFS driver for Linux. + https://www.paragon-software.com/home/ntfs-linux-professional/ -almaz.alexandrovich@paragon-software.com - - Direct e-mail address for feedback and requests on the NTFS3 implementation. +- Direct e-mail address for feedback and requests on the NTFS3 implementation. + almaz.alexandrovich@paragon-software.com diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst index 364680cdad2e..8ba72e898099 100644 --- a/Documentation/gpu/amdgpu.rst +++ b/Documentation/gpu/amdgpu.rst @@ -300,8 +300,8 @@ pcie_replay_count .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c :doc: pcie_replay_count -+GPU SmartShift Information -============================ +GPU SmartShift Information +========================== GPU SmartShift information via sysfs diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 06af044c882f..607f78f0f189 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -111,15 +111,6 @@ Component Helper Usage .. kernel-doc:: drivers/gpu/drm/drm_drv.c :doc: component helper usage recommendations -IRQ Helper Library -~~~~~~~~~~~~~~~~~~ - -.. kernel-doc:: drivers/gpu/drm/drm_irq.c - :doc: irq helpers - -.. kernel-doc:: drivers/gpu/drm/drm_irq.c - :export: - Memory Manager Initialization ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst index 8557e26281c3..91b99adc6c48 100644 --- a/Documentation/hwmon/k10temp.rst +++ b/Documentation/hwmon/k10temp.rst @@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU variant. - -Various Family 17h and 18h CPUs report voltage and current telemetry -information. The following attributes may be reported. - -Attribute Label Description -=============== ======= ================ -in0_input Vcore Core voltage -in1_input Vsoc SoC voltage -curr1_input Icore Core current -curr2_input Isoc SoC current -=============== ======= ================ - -Current values are raw (unscaled) as reported by the CPU. Core current is -reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A -/ LSB. The real current is board specific. Reported currents should be seen -as rough guidance, and should be scaled using sensors3.conf as appropriate -for a given board. diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index e7d9cbff771b..67b7a701ce9e 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -851,7 +851,7 @@ NOTES: - 0x88A8 traffic will not be received unless VLAN stripping is disabled with the following command:: - # ethool -K <ethX> rxvlan off + # ethtool -K <ethX> rxvlan off - 0x88A8/0x8100 double VLANs cannot be used with 0x8100 or 0x8100/0x8100 VLANS configured on the same port. 0x88a8/0x8100 traffic will not be received if diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst index 564caeebe2b2..29b1bae0cf00 100644 --- a/Documentation/networking/dsa/sja1105.rst +++ b/Documentation/networking/dsa/sja1105.rst @@ -296,7 +296,7 @@ not available. Device Tree bindings and board design ===================================== -This section references ``Documentation/devicetree/bindings/net/dsa/sja1105.txt`` +This section references ``Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml`` and aims to showcase some potential switch caveats. RMII PHY role and out-of-band signaling diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index d3a8557b66a1..e35ab74a0f80 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -29,7 +29,7 @@ you probably needn't concern yourself with pcmciautils. ====================== =============== ======================================== Program Minimal version Command to check the version ====================== =============== ======================================== -GNU C 4.9 gcc --version +GNU C 5.1 gcc --version Clang/LLVM (optional) 10.0.1 clang --version GNU make 3.81 make --version binutils 2.23 ld -v diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst index 65f61695f561..34888d4fc4a8 100644 --- a/Documentation/sound/alsa-configuration.rst +++ b/Documentation/sound/alsa-configuration.rst @@ -100,6 +100,15 @@ amidi_map MIDI device number maps assigned to the 2st OSS device; Default: 1 +Module snd-soc-core +------------------- + +The soc core module. It is used by all ALSA card drivers. +It takes the following options which have global effects. + +prealloc_buffer_size_kbytes + Specify prealloc buffer size in kbytes (default: 512). + Common parameters for top sound card modules -------------------------------------------- diff --git a/Documentation/sound/soc/codec.rst b/Documentation/sound/soc/codec.rst index 8a9737eb7597..57df149acafc 100644 --- a/Documentation/sound/soc/codec.rst +++ b/Documentation/sound/soc/codec.rst @@ -40,7 +40,7 @@ e.g. .prepare = wm8731_pcm_prepare, .hw_params = wm8731_hw_params, .shutdown = wm8731_shutdown, - .digital_mute = wm8731_mute, + .mute_stream = wm8731_mute, .set_sysclk = wm8731_set_dai_sysclk, .set_fmt = wm8731_set_dai_fmt, }; @@ -60,7 +60,7 @@ e.g. .rates = WM8731_RATES, .formats = WM8731_FORMATS,}, .ops = &wm8731_dai_ops, - .symmetric_rates = 1, + .symmetric_rate = 1, }; @@ -177,10 +177,10 @@ when the mute is applied or freed. i.e. :: - static int wm8974_mute(struct snd_soc_dai *dai, int mute) + static int wm8974_mute(struct snd_soc_dai *dai, int mute, int direction) { struct snd_soc_component *component = dai->component; - u16 mute_reg = snd_soc_component_read32(component, WM8974_DAC) & 0xffbf; + u16 mute_reg = snd_soc_component_read(component, WM8974_DAC) & 0xffbf; if (mute) snd_soc_component_write(component, WM8974_DAC, mute_reg | 0x40); diff --git a/Documentation/translations/zh_CN/admin-guide/README.rst b/Documentation/translations/zh_CN/admin-guide/README.rst index 669a022f6817..980eb20521cf 100644 --- a/Documentation/translations/zh_CN/admin-guide/README.rst +++ b/Documentation/translations/zh_CN/admin-guide/README.rst @@ -223,7 +223,7 @@ Linux内核5.x版本 <http://kernel.org/> 编译内核 --------- - - 确保您至少有gcc 4.9可用。 + - 确保您至少有gcc 5.1可用。 有关更多信息，请参阅 :ref:`Documentation/process/changes.rst <changes>` 。 请注意，您仍然可以使用此内核运行a.out用户程序。 diff --git a/Documentation/translations/zh_TW/admin-guide/README.rst b/Documentation/translations/zh_TW/admin-guide/README.rst index b752e50359e6..6ce97edbab37 100644 --- a/Documentation/translations/zh_TW/admin-guide/README.rst +++ b/Documentation/translations/zh_TW/admin-guide/README.rst @@ -226,7 +226,7 @@ Linux內核5.x版本 <http://kernel.org/> 編譯內核 --------- - - 確保您至少有gcc 4.9可用。 + - 確保您至少有gcc 5.1可用。 有關更多信息，請參閱 :ref:`Documentation/process/changes.rst <changes>` 。 請注意，您仍然可以使用此內核運行a.out用戶程序。 diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst index 42ef59ea5314..bdb880e01132 100644 --- a/Documentation/userspace-api/vduse.rst +++ b/Documentation/userspace-api/vduse.rst @@ -18,7 +18,7 @@ types can be added after the security issue of corresponding device driver is clarified or fixed in the future. Create/Destroy VDUSE devices ------------------------- +---------------------------- VDUSE devices are created as follows: |