diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst')
| -rw-r--r-- | Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 906 |
1 files changed, 0 insertions, 906 deletions
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 6cf68588af1b..2a165ae063fb 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -2658,909 +2658,3 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 disables generating SPS and PPS at every IDR. Setting it to one enables generating SPS and PPS at every IDR. - -.. _v4l2-mpeg-hevc: - -``V4L2_CID_STATELESS_HEVC_SPS (struct)`` - Specifies the Sequence Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.2 "Sequence parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_sps - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_sps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``video_parameter_set_id`` - - Specifies the value of the vps_video_parameter_set_id of the active VPS - as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" - of H.265 specifications. - * - __u8 - - ``seq_parameter_set_id`` - - Provides an identifier for the SPS for reference by other syntax elements - as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" - of H.265 specifications. - * - __u16 - - ``pic_width_in_luma_samples`` - - Specifies the width of each decoded picture in units of luma samples. - * - __u16 - - ``pic_height_in_luma_samples`` - - Specifies the height of each decoded picture in units of luma samples. - * - __u8 - - ``bit_depth_luma_minus8`` - - This value plus 8 specifies the bit depth of the samples of the luma array. - * - __u8 - - ``bit_depth_chroma_minus8`` - - This value plus 8 specifies the bit depth of the samples of the chroma arrays. - * - __u8 - - ``log2_max_pic_order_cnt_lsb_minus4`` - - This value plus 4 specifies the value of the variable MaxPicOrderCntLsb. - * - __u8 - - ``sps_max_dec_pic_buffering_minus1`` - - This value plus 1 specifies the maximum required size of the decoded picture buffer for - the codec video sequence. - * - __u8 - - ``sps_max_num_reorder_pics`` - - Indicates the maximum allowed number of pictures. - * - __u8 - - ``sps_max_latency_increase_plus1`` - - Not equal to 0 is used to compute the value of SpsMaxLatencyPictures array. - * - __u8 - - ``log2_min_luma_coding_block_size_minus3`` - - This value plus 3 specifies the minimum luma coding block size. - * - __u8 - - ``log2_diff_max_min_luma_coding_block_size`` - - Specifies the difference between the maximum and minimum luma coding block size. - * - __u8 - - ``log2_min_luma_transform_block_size_minus2`` - - This value plus 2 specifies the minimum luma transform block size. - * - __u8 - - ``log2_diff_max_min_luma_transform_block_size`` - - Specifies the difference between the maximum and minimum luma transform block size. - * - __u8 - - ``max_transform_hierarchy_depth_inter`` - - Specifies the maximum hierarchy depth for transform units of coding units coded - in inter prediction mode. - * - __u8 - - ``max_transform_hierarchy_depth_intra`` - - Specifies the maximum hierarchy depth for transform units of coding units coded in - intra prediction mode. - * - __u8 - - ``pcm_sample_bit_depth_luma_minus1`` - - This value plus 1 specifies the number of bits used to represent each of PCM sample - values of the luma component. - * - __u8 - - ``pcm_sample_bit_depth_chroma_minus1`` - - This value plus 1 specifies the number of bits used to represent each of PCM sample - values of the chroma components. - * - __u8 - - ``log2_min_pcm_luma_coding_block_size_minus3`` - - This value plus 3 specifies the minimum size of coding blocks. - * - __u8 - - ``log2_diff_max_min_pcm_luma_coding_block_size`` - - Specifies the difference between the maximum and minimum size of coding blocks. - * - __u8 - - ``num_short_term_ref_pic_sets`` - - Specifies the number of st_ref_pic_set() syntax structures included in the SPS. - * - __u8 - - ``num_long_term_ref_pics_sps`` - - Specifies the number of candidate long-term reference pictures that are - specified in the SPS. - * - __u8 - - ``chroma_format_idc`` - - Specifies the chroma sampling. - * - __u8 - - ``sps_max_sub_layers_minus1`` - - This value plus 1 specifies the maximum number of temporal sub-layers. - * - __u64 - - ``flags`` - - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` - -.. raw:: latex - - \normalsize - -.. _hevc_sps_flags: - -``Sequence Parameter Set Flags`` - -.. raw:: latex - - \small - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` - - 0x00000001 - - - * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` - - 0x00000002 - - - * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` - - 0x00000008 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` - - 0x00000010 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` - - 0x00000040 - - - * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` - - 0x00000100 - - - -.. raw:: latex - - \normalsize - -``V4L2_CID_STATELESS_HEVC_PPS (struct)`` - Specifies the Picture Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.3 "Picture parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_pps - -.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_pps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``pic_parameter_set_id`` - - Identifies the PPS for reference by other syntax elements. - * - __u8 - - ``num_extra_slice_header_bits`` - - Specifies the number of extra slice header bits that are present - in the slice header RBSP for coded pictures referring to the PPS. - * - __u8 - - ``num_ref_idx_l0_default_active_minus1`` - - This value plus 1 specifies the inferred value of num_ref_idx_l0_active_minus1. - * - __u8 - - ``num_ref_idx_l1_default_active_minus1`` - - This value plus 1 specifies the inferred value of num_ref_idx_l1_active_minus1. - * - __s8 - - ``init_qp_minus26`` - - This value plus 26 specifies the initial value of SliceQp Y for each slice - referring to the PPS. - * - __u8 - - ``diff_cu_qp_delta_depth`` - - Specifies the difference between the luma coding tree block size - and the minimum luma coding block size of coding units that - convey cu_qp_delta_abs and cu_qp_delta_sign_flag. - * - __s8 - - ``pps_cb_qp_offset`` - - Specifies the offsets to the luma quantization parameter Cb. - * - __s8 - - ``pps_cr_qp_offset`` - - Specifies the offsets to the luma quantization parameter Cr. - * - __u8 - - ``num_tile_columns_minus1`` - - This value plus 1 specifies the number of tile columns partitioning the picture. - * - __u8 - - ``num_tile_rows_minus1`` - - This value plus 1 specifies the number of tile rows partitioning the picture. - * - __u8 - - ``column_width_minus1[20]`` - - Plus 1 specifies the width of each tile column in units of - coding tree blocks. - * - __u8 - - ``row_height_minus1[22]`` - - This value plus 1 specifies the height of each tile row in units of coding - tree blocks. - * - __s8 - - ``pps_beta_offset_div2`` - - Specifies the default deblocking parameter offsets for beta divided by 2. - * - __s8 - - ``pps_tc_offset_div2`` - - Specifies the default deblocking parameter offsets for tC divided by 2. - * - __u8 - - ``log2_parallel_merge_level_minus2`` - - Plus 2 specifies the value of the variable Log2ParMrgLevel. - * - __u8 - - ``padding[4]`` - - Applications and drivers must set this to zero. - * - __u64 - - ``flags`` - - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>` - -.. _hevc_pps_flags: - -``Picture Parameter Set Flags`` - -.. raw:: latex - - \small - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED`` - - 0x00000001 - - - * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` - - 0x00000002 - - - * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` - - 0x00000008 - - - * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` - - 0x00000040 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` - - 0x00000080 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000100 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` - - 0x00000200 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` - - 0x00000400 - - - * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` - - 0x00000800 - - - * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` - - 0x00001000 - - - * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` - - 0x00002000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00004000 - - - * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` - - 0x00008000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` - - 0x00010000 - - - * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` - - 0x00020000 - - - * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` - - 0x00040000 - - - * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` - - 0x00080000 - - Specifies the presence of deblocking filter control syntax elements in - the PPS - * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING`` - - 0x00100000 - - Specifies that tile column boundaries and likewise tile row boundaries - are distributed uniformly across the picture - -.. raw:: latex - - \normalsize - -``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)`` - Specifies various slice-specific parameters, especially from the NAL unit - header, general slice segment header and weighted prediction parameter - parts of the bitstream. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.7 "General slice segment header - semantics" of the specification. - This control is a dynamically sized 1-dimensional array, - V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it. - -.. c:type:: v4l2_ctrl_hevc_slice_params - -.. raw:: latex - - \scriptsize - -.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``bit_size`` - - Size (in bits) of the current slice data. - * - __u32 - - ``data_byte_offset`` - - Offset (in bytes) to the video data in the current slice data. - * - __u32 - - ``num_entry_point_offsets`` - - Specifies the number of entry point offset syntax elements in the slice header. - When the driver supports it, the ``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS`` - must be set. - * - __u8 - - ``nal_unit_type`` - - Specifies the coding type of the slice (B, P or I). - * - __u8 - - ``nuh_temporal_id_plus1`` - - This value minus 1 specifies a temporal identifier for the NAL unit. - * - __u8 - - ``slice_type`` - - - (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or - V4L2_HEVC_SLICE_TYPE_B). - * - __u8 - - ``colour_plane_id`` - - Specifies the colour plane associated with the current slice. - * - __s32 - - ``slice_pic_order_cnt`` - - Specifies the picture order count. - * - __u8 - - ``num_ref_idx_l0_active_minus1`` - - This value plus 1 specifies the maximum reference index for - reference picture list 0 that may be used to decode the slice. - * - __u8 - - ``num_ref_idx_l1_active_minus1`` - - This value plus 1 specifies the maximum reference index for - reference picture list 1 that may be used to decode the slice. - * - __u8 - - ``collocated_ref_idx`` - - Specifies the reference index of the collocated picture used for - temporal motion vector prediction. - * - __u8 - - ``five_minus_max_num_merge_cand`` - - Specifies the maximum number of merging motion vector prediction - candidates supported in the slice subtracted from 5. - * - __s8 - - ``slice_qp_delta`` - - Specifies the initial value of QpY to be used for the coding blocks in the slice. - * - __s8 - - ``slice_cb_qp_offset`` - - Specifies a difference to be added to the value of pps_cb_qp_offset. - * - __s8 - - ``slice_cr_qp_offset`` - - Specifies a difference to be added to the value of pps_cr_qp_offset. - * - __s8 - - ``slice_act_y_qp_offset`` - - Screen content extension parameters. - * - __s8 - - ``slice_act_cb_qp_offset`` - - Screen content extension parameters. - * - __s8 - - ``slice_act_cr_qp_offset`` - - Screen content extension parameters. - * - __s8 - - ``slice_beta_offset_div2`` - - Specifies the deblocking parameter offsets for beta divided by 2. - * - __s8 - - ``slice_tc_offset_div2`` - - Specifies the deblocking parameter offsets for tC divided by 2. - * - __u8 - - ``pic_struct`` - - Indicates whether a picture should be displayed as a frame or as one or more fields. - * - __u32 - - ``slice_segment_addr`` - - Specifies the address of the first coding tree block in the slice segment. - * - __u8 - - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L0 reference elements as indices in the DPB. - * - __u8 - - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L1 reference elements as indices in the DPB. - * - __u16 - - ``short_term_ref_pic_set_size`` - - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set() - in the specification, included in the slice header or SPS (section 7.3.6.1). - * - __u16 - - ``long_term_ref_pic_set_size`` - - Specifies the size, in bits, of the long-term reference picture set include in the slice header - or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag) - in section 7.3.6.1 of the specification. - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - * - struct :c:type:`v4l2_hevc_pred_weight_table` - - ``pred_weight_table`` - - The prediction weight coefficients for inter-picture prediction. - * - __u64 - - ``flags`` - - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` - -.. raw:: latex - - \normalsize - -.. _hevc_slice_params_flags: - -``Slice Parameters Flags`` - -.. raw:: latex - - \scriptsize - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` - - 0x00000001 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` - - 0x00000002 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` - - 0x00000008 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` - - 0x00000010 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` - - 0x00000020 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` - - 0x00000040 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00000100 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT`` - - 0x00000200 - - - -.. raw:: latex - - \normalsize - -``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (integer)`` - Specifies entry point offsets in bytes. - This control is a dynamically sized array. The number of entry point - offsets is reported by the ``elems`` field. - This bitstream parameter is defined according to :ref:`hevc`. - They are described in section 7.4.7.1 "General slice segment header - semantics" of the specification. - When multiple slices are submitted in a request, the length of - this array must be the sum of num_entry_point_offsets of all the - slices in the request. - -``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)`` - Specifies the HEVC scaling matrix parameters used for the scaling process - for transform coefficients. - These matrix and parameters are defined according to :ref:`hevc`. - They are described in section 7.4.5 "Scaling list data semantics" of - the specification. - -.. c:type:: v4l2_ctrl_hevc_scaling_matrix - -.. raw:: latex - - \scriptsize - -.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``scaling_list_4x4[6][16]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_8x8[6][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_16x16[6][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_32x32[2][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_dc_coef_16x16[6]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_dc_coef_32x32[2]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - -.. raw:: latex - - \normalsize - -.. c:type:: v4l2_hevc_dpb_entry - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| - -.. flat-table:: struct v4l2_hevc_dpb_entry - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``timestamp`` - - Timestamp of the V4L2 capture buffer to use as reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u8 - - ``flags`` - - Long term flag for the reference frame - (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as - described in the ITU HEVC specification chapter "8.3.2 Decoding - process for reference picture set". - * - __u8 - - ``field_pic`` - - Whether the reference is a field picture or a frame. - See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>` - * - __s32 - - ``pic_order_cnt_val`` - - The picture order count of the current picture. - * - __u8 - - ``padding[2]`` - - Applications and drivers must set this to zero. - -.. raw:: latex - - \normalsize - -.. _hevc_dpb_field_pic_flags: - -``HEVC dpb field pic Flags`` - -.. raw:: latex - - \scriptsize - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME`` - - 0 - - (progressive) Frame - * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD`` - - 1 - - Top field - * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD`` - - 2 - - Bottom field - * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM`` - - 3 - - Top field, bottom field, in that order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP`` - - 4 - - Bottom field, top field, in that order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP`` - - 5 - - Top field, bottom field, top field repeated, in that order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM`` - - 6 - - Bottom field, top field, bottom field repeated, in that order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING`` - - 7 - - Frame doubling - * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING`` - - 8 - - Frame tripling - * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM`` - - 9 - - Top field paired with previous bottom field in output order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP`` - - 10 - - Bottom field paired with previous top field in output order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM`` - - 11 - - Top field paired with next bottom field in output order - * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP`` - - 12 - - Bottom field paired with next top field in output order - -.. c:type:: v4l2_hevc_pred_weight_table - -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| - -.. flat-table:: struct v4l2_hevc_pred_weight_table - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The difference of the weighting factor applied to the luma - prediction value for list 0. - * - __s8 - - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The additive offset applied to the luma prediction value for list 0. - * - __s8 - - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - The difference of the weighting factor applied to the chroma - prediction value for list 0. - * - __s8 - - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - The difference of the additive offset applied to the chroma - prediction values for list 0. - * - __s8 - - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The difference of the weighting factor applied to the luma - prediction value for list 1. - * - __s8 - - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The additive offset applied to the luma prediction value for list 1. - * - __s8 - - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - The difference of the weighting factor applied to the chroma - prediction value for list 1. - * - __s8 - - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - The difference of the additive offset applied to the chroma - prediction values for list 1. - * - __u8 - - ``luma_log2_weight_denom`` - - The base 2 logarithm of the denominator for all luma weighting - factors. - * - __s8 - - ``delta_chroma_log2_weight_denom`` - - The difference of the base 2 logarithm of the denominator for - all chroma weighting factors. - * - __u8 - - ``padding[6]`` - - Applications and drivers must set this to zero. - -.. raw:: latex - - \normalsize - -``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)`` - Specifies the decoding mode to use. Currently exposes slice-based and - frame-based decoding but new modes might be added later on. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the decoding mode - that is expected for the buffer. - Drivers may expose a single or multiple decoding modes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_stateless_hevc_decode_mode - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED`` - - 0 - - Decoding is done at the slice granularity. - The OUTPUT buffer must contain a single slice. - * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED`` - - 1 - - Decoding is done at the frame granularity. - The OUTPUT buffer must contain all slices needed to decode the - frame. The OUTPUT buffer must also contain both fields. - -.. raw:: latex - - \normalsize - -``V4L2_CID_STATELESS_HEVC_START_CODE (enum)`` - Specifies the HEVC slice start code expected for each slice. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the start code - that is expected for the buffer. - Drivers may expose a single or multiple start codes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_stateless_hevc_start_code - -.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_STATELESS_HEVC_START_CODE_NONE`` - - 0 - - Selecting this value specifies that HEVC slices are passed - to the driver without any start code. The bitstream data should be - according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence - contains emulation prevention bytes when required. - * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B`` - - 1 - - Selecting this value specifies that HEVC slices are expected - to be prefixed by Annex B start codes. According to :ref:`hevc` - valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. - -``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)`` - Specifies a priority identifier for the NAL unit, which will be applied to - the base layer. By default this value is set to 0 for the base layer, - and the next layer will have the priority ID assigned as 1, 2, 3 and so on. - The video encoder can't decide the priority id to be applied to a layer, - so this has to come from client. - This is applicable to H264 and valid Range is from 0 to 63. - Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. - -``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` - Specifies the maximum number of Long Term Reference (LTR) frames at any - given time that the encoder can keep. - This is applicable to the H264 and HEVC encoders. - -``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` - After setting this control the frame that will be queued next - will be marked as a Long Term Reference (LTR) frame - and given this LTR index which ranges from 0 to LTR_COUNT-1. - This is applicable to the H264 and HEVC encoders. - Source Rec. ITU-T H.264 (06/2019); Table 7.9 - -``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` - Specifies the Long Term Reference (LTR) frame(s) to be used for - encoding the next frame queued after setting this control. - This provides a bitmask which consists of bits [0, LTR_COUNT-1]. - This is applicable to the H264 and HEVC encoders. - -``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)`` - Specifies various decode parameters, especially the references picture order - count (POC) for all the lists (short, long, before, current, after) and the - number of entries for each of them. - These parameters are defined according to :ref:`hevc`. - They are described in section 8.3 "Slice decoding process" of the - specification. - -.. c:type:: v4l2_ctrl_hevc_decode_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_decode_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s32 - - ``pic_order_cnt_val`` - - PicOrderCntVal as described in section 8.3.1 "Decoding process - for picture order count" of the specification. - * - __u16 - - ``short_term_ref_pic_set_size`` - - Specifies the size, in bits, of the short-term reference picture set, of the first slice - described as st_ref_pic_set() in the specification, included in the slice header - or SPS (section 7.3.6.1). - * - __u16 - - ``long_term_ref_pic_set_size`` - - Specifies the size, in bits, of the long-term reference picture set, of the first slice - included in the slice header or SPS. It is the number of bits in the conditional block - if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification. - * - __u8 - - ``num_active_dpb_entries`` - - The number of entries in ``dpb``. - * - __u8 - - ``num_poc_st_curr_before`` - - The number of reference pictures in the short-term set that come before - the current frame. - * - __u8 - - ``num_poc_st_curr_after`` - - The number of reference pictures in the short-term set that come after - the current frame. - * - __u8 - - ``num_poc_lt_curr`` - - The number of reference pictures in the long-term set. - * - __u8 - - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the short term before references in DPB array. - * - __u8 - - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the short term after references in DPB array. - * - __u8 - - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocLtCurr as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the long term references in DPB array. - * - struct :c:type:`v4l2_hevc_dpb_entry` - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The decoded picture buffer, for meta-data about reference frames. - * - __u64 - - ``flags`` - - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>` - -.. _hevc_decode_params_flags: - -``Decode Parameters Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC`` - - 0x00000001 - - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC`` - - 0x00000002 - - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR`` - - 0x00000004 - - |