summaryrefslogtreecommitdiffstats
path: root/Documentation/userspace-api/media/v4l/dev-encoder.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/userspace-api/media/v4l/dev-encoder.rst')
-rw-r--r--Documentation/userspace-api/media/v4l/dev-encoder.rst753
1 files changed, 753 insertions, 0 deletions
diff --git a/Documentation/userspace-api/media/v4l/dev-encoder.rst b/Documentation/userspace-api/media/v4l/dev-encoder.rst
new file mode 100644
index 000000000000..fb44f20924de
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-encoder.rst
@@ -0,0 +1,753 @@
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+.. modify it under the terms of the GNU General Public License as
+.. published by the Free Software Foundation version 2 of
+.. the License.
+..
+.. This file is distributed in the hope that it will be useful,
+.. but WITHOUT ANY WARRANTY; without even the implied warranty of
+.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.. GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/userspace-api/media/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _encoder:
+
+*************************************************
+Memory-to-Memory Stateful Video Encoder Interface
+*************************************************
+
+A stateful video encoder takes raw video frames in display order and encodes
+them into a bytestream. It generates complete chunks of the bytestream, including
+all metadata, headers, etc. The resulting bytestream does not require any
+further post-processing by the client.
+
+Performing software stream processing, header generation etc. in the driver
+in order to support this interface is strongly discouraged. In case such
+operations are needed, use of the Stateless Video Encoder Interface (in
+development) is strongly advised.
+
+Conventions and Notations Used in This Document
+===============================================
+
+1. The general V4L2 API rules apply if not specified in this document
+ otherwise.
+
+2. The meaning of words "must", "may", "should", etc. is as per `RFC
+ 2119 <https://tools.ietf.org/html/rfc2119>`_.
+
+3. All steps not marked "optional" are required.
+
+4. :c:func:`VIDIOC_G_EXT_CTRLS` and :c:func:`VIDIOC_S_EXT_CTRLS` may be used
+ interchangeably with :c:func:`VIDIOC_G_CTRL` and :c:func:`VIDIOC_S_CTRL`,
+ unless specified otherwise.
+
+5. Single-planar API (see :ref:`planar-apis`) and applicable structures may be
+ used interchangeably with multi-planar API, unless specified otherwise,
+ depending on encoder capabilities and following the general V4L2 guidelines.
+
+6. i = [a..b]: sequence of integers from a to b, inclusive, i.e. i =
+ [0..2]: i = 0, 1, 2.
+
+7. Given an ``OUTPUT`` buffer A, then A' represents a buffer on the ``CAPTURE``
+ queue containing data that resulted from processing buffer A.
+
+Glossary
+========
+
+Refer to :ref:`decoder-glossary`.
+
+State Machine
+=============
+
+.. kernel-render:: DOT
+ :alt: DOT digraph of encoder state machine
+ :caption: Encoder State Machine
+
+ digraph encoder_state_machine {
+ node [shape = doublecircle, label="Encoding"] Encoding;
+
+ node [shape = circle, label="Initialization"] Initialization;
+ node [shape = circle, label="Stopped"] Stopped;
+ node [shape = circle, label="Drain"] Drain;
+ node [shape = circle, label="Reset"] Reset;
+
+ node [shape = point]; qi
+ qi -> Initialization [ label = "open()" ];
+
+ Initialization -> Encoding [ label = "Both queues streaming" ];
+
+ Encoding -> Drain [ label = "V4L2_ENC_CMD_STOP" ];
+ Encoding -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+ Encoding -> Stopped [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+ Encoding -> Encoding;
+
+ Drain -> Stopped [ label = "All CAPTURE\nbuffers dequeued\nor\nVIDIOC_STREAMOFF(OUTPUT)" ];
+ Drain -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+
+ Reset -> Encoding [ label = "VIDIOC_STREAMON(CAPTURE)" ];
+ Reset -> Initialization [ label = "VIDIOC_REQBUFS(OUTPUT, 0)" ];
+
+ Stopped -> Encoding [ label = "V4L2_ENC_CMD_START\nor\nVIDIOC_STREAMON(OUTPUT)" ];
+ Stopped -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+ }
+
+Querying Capabilities
+=====================
+
+1. To enumerate the set of coded formats supported by the encoder, the
+ client may call :c:func:`VIDIOC_ENUM_FMT` on ``CAPTURE``.
+
+ * The full set of supported formats will be returned, regardless of the
+ format set on ``OUTPUT``.
+
+2. To enumerate the set of supported raw formats, the client may call
+ :c:func:`VIDIOC_ENUM_FMT` on ``OUTPUT``.
+
+ * Only the formats supported for the format currently active on ``CAPTURE``
+ will be returned.
+
+ * In order to enumerate raw formats supported by a given coded format,
+ the client must first set that coded format on ``CAPTURE`` and then
+ enumerate the formats on ``OUTPUT``.
+
+3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
+ resolutions for a given format, passing the desired pixel format in
+ :c:type:`v4l2_frmsizeenum` ``pixel_format``.
+
+ * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a coded pixel
+ format will include all possible coded resolutions supported by the
+ encoder for the given coded pixel format.
+
+ * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a raw pixel format
+ will include all possible frame buffer resolutions supported by the
+ encoder for the given raw pixel format and coded format currently set on
+ ``CAPTURE``.
+
+4. The client may use :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` to detect supported
+ frame intervals for a given format and resolution, passing the desired pixel
+ format in :c:type:`v4l2_frmsizeenum` ``pixel_format`` and the resolution
+ in :c:type:`v4l2_frmsizeenum` ``width`` and :c:type:`v4l2_frmsizeenum`
+ ``height``.
+
+ * Values returned by :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` for a coded pixel
+ format and coded resolution will include all possible frame intervals
+ supported by the encoder for the given coded pixel format and resolution.
+
+ * Values returned by :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` for a raw pixel
+ format and resolution will include all possible frame intervals supported
+ by the encoder for the given raw pixel format and resolution and for the
+ coded format, coded resolution and coded frame interval currently set on
+ ``CAPTURE``.
+
+ * Support for :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` is optional. If it is
+ not implemented, then there are no special restrictions other than the
+ limits of the codec itself.
+
+5. Supported profiles and levels for the coded format currently set on
+ ``CAPTURE``, if applicable, may be queried using their respective controls
+ via :c:func:`VIDIOC_QUERYCTRL`.
+
+6. Any additional encoder capabilities may be discovered by querying
+ their respective controls.
+
+Initialization
+==============
+
+1. Set the coded format on the ``CAPTURE`` queue via :c:func:`VIDIOC_S_FMT`.
+
+ * **Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+ ``pixelformat``
+ the coded format to be produced.
+
+ ``sizeimage``
+ desired size of ``CAPTURE`` buffers; the encoder may adjust it to
+ match hardware requirements.
+
+ ``width``, ``height``
+ ignored (read-only).
+
+ other fields
+ follow standard semantics.
+
+ * **Return fields:**
+
+ ``sizeimage``
+ adjusted size of ``CAPTURE`` buffers.
+
+ ``width``, ``height``
+ the coded size selected by the encoder based on current state, e.g.
+ ``OUTPUT`` format, selection rectangles, etc. (read-only).
+
+ .. important::
+
+ Changing the ``CAPTURE`` format may change the currently set ``OUTPUT``
+ format. How the new ``OUTPUT`` format is determined is up to the encoder
+ and the client must ensure it matches its needs afterwards.
+
+2. **Optional.** Enumerate supported ``OUTPUT`` formats (raw formats for
+ source) for the selected coded format via :c:func:`VIDIOC_ENUM_FMT`.
+
+ * **Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+ other fields
+ follow standard semantics.
+
+ * **Return fields:**
+
+ ``pixelformat``
+ raw format supported for the coded format currently selected on
+ the ``CAPTURE`` queue.
+
+ other fields
+ follow standard semantics.
+
+3. Set the raw source format on the ``OUTPUT`` queue via
+ :c:func:`VIDIOC_S_FMT`.
+
+ * **Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+ ``pixelformat``
+ raw format of the source.
+
+ ``width``, ``height``
+ source resolution.
+
+ other fields
+ follow standard semantics.
+
+ * **Return fields:**
+
+ ``width``, ``height``
+ may be adjusted to match encoder minimums, maximums and alignment
+ requirements, as required by the currently selected formats, as
+ reported by :c:func:`VIDIOC_ENUM_FRAMESIZES`.
+
+ other fields
+ follow standard semantics.
+
+ * Setting the ``OUTPUT`` format will reset the selection rectangles to their
+ default values, based on the new resolution, as described in the next
+ step.
+
+4. Set the raw frame interval on the ``OUTPUT`` queue via
+ :c:func:`VIDIOC_S_PARM`. This also sets the coded frame interval on the
+ ``CAPTURE`` queue to the same value.
+
+ * ** Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+ ``parm.output``
+ set all fields except ``parm.output.timeperframe`` to 0.
+
+ ``parm.output.timeperframe``
+ the desired frame interval; the encoder may adjust it to
+ match hardware requirements.
+
+ * **Return fields:**
+
+ ``parm.output.timeperframe``
+ the adjusted frame interval.
+
+ .. important::
+
+ Changing the ``OUTPUT`` frame interval *also* sets the framerate that
+ the encoder uses to encode the video. So setting the frame interval
+ to 1/24 (or 24 frames per second) will produce a coded video stream
+ that can be played back at that speed. The frame interval for the
+ ``OUTPUT`` queue is just a hint, the application may provide raw
+ frames at a different rate. It can be used by the driver to help
+ schedule multiple encoders running in parallel.
+
+ In the next step the ``CAPTURE`` frame interval can optionally be
+ changed to a different value. This is useful for off-line encoding
+ were the coded frame interval can be different from the rate at
+ which raw frames are supplied.
+
+ .. important::
+
+ ``timeperframe`` deals with *frames*, not fields. So for interlaced
+ formats this is the time per two fields, since a frame consists of
+ a top and a bottom field.
+
+ .. note::
+
+ It is due to historical reasons that changing the ``OUTPUT`` frame
+ interval also changes the coded frame interval on the ``CAPTURE``
+ queue. Ideally these would be independent settings, but that would
+ break the existing API.
+
+5. **Optional** Set the coded frame interval on the ``CAPTURE`` queue via
+ :c:func:`VIDIOC_S_PARM`. This is only necessary if the coded frame
+ interval is different from the raw frame interval, which is typically
+ the case for off-line encoding. Support for this feature is signalled
+ by the :ref:`V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL <fmtdesc-flags>` format flag.
+
+ * ** Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+ ``parm.capture``
+ set all fields except ``parm.capture.timeperframe`` to 0.
+
+ ``parm.capture.timeperframe``
+ the desired coded frame interval; the encoder may adjust it to
+ match hardware requirements.
+
+ * **Return fields:**
+
+ ``parm.capture.timeperframe``
+ the adjusted frame interval.
+
+ .. important::
+
+ Changing the ``CAPTURE`` frame interval sets the framerate for the
+ coded video. It does *not* set the rate at which buffers arrive on the
+ ``CAPTURE`` queue, that depends on how fast the encoder is and how
+ fast raw frames are queued on the ``OUTPUT`` queue.
+
+ .. important::
+
+ ``timeperframe`` deals with *frames*, not fields. So for interlaced
+ formats this is the time per two fields, since a frame consists of
+ a top and a bottom field.
+
+ .. note::
+
+ Not all drivers support this functionality, in that case just set
+ the desired coded frame interval for the ``OUTPUT`` queue.
+
+ However, drivers that can schedule multiple encoders based on the
+ ``OUTPUT`` frame interval must support this optional feature.
+
+6. **Optional.** Set the visible resolution for the stream metadata via
+ :c:func:`VIDIOC_S_SELECTION` on the ``OUTPUT`` queue if it is desired
+ to be different than the full OUTPUT resolution.
+
+ * **Required fields:**
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+ ``target``
+ set to ``V4L2_SEL_TGT_CROP``.
+
+ ``r.left``, ``r.top``, ``r.width``, ``r.height``
+ visible rectangle; this must fit within the `V4L2_SEL_TGT_CROP_BOUNDS`
+ rectangle and may be subject to adjustment to match codec and
+ hardware constraints.
+
+ * **Return fields:**
+
+ ``r.left``, ``r.top``, ``r.width``, ``r.height``
+ visible rectangle adjusted by the encoder.
+
+ * The following selection targets are supported on ``OUTPUT``:
+
+ ``V4L2_SEL_TGT_CROP_BOUNDS``
+ equal to the full source frame, matching the active ``OUTPUT``
+ format.
+
+ ``V4L2_SEL_TGT_CROP_DEFAULT``
+ equal to ``V4L2_SEL_TGT_CROP_BOUNDS``.
+
+ ``V4L2_SEL_TGT_CROP``
+ rectangle within the source buffer to be encoded into the
+ ``CAPTURE`` stream; defaults to ``V4L2_SEL_TGT_CROP_DEFAULT``.
+
+ .. note::
+
+ A common use case for this selection target is encoding a source
+ video with a resolution that is not a multiple of a macroblock,
+ e.g. the common 1920x1080 resolution may require the source
+ buffers to be aligned to 1920x1088 for codecs with 16x16 macroblock
+ size. To avoid encoding the padding, the client needs to explicitly
+ configure this selection target to 1920x1080.
+
+ .. warning::
+
+ The encoder may adjust the crop/compose rectangles to the nearest
+ supported ones to meet codec and hardware requirements. The client needs
+ to check the adjusted rectangle returned by :c:func:`VIDIOC_S_SELECTION`.
+
+7. Allocate buffers for both ``OUTPUT`` and ``CAPTURE`` via
+ :c:func:`VIDIOC_REQBUFS`. This may be performed in any order.
+
+ * **Required fields:**
+
+ ``count``
+ requested number of buffers to allocate; greater than zero.
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT`` or
+ ``CAPTURE``.
+
+ other fields
+ follow standard semantics.
+
+ * **Return fields:**
+
+ ``count``
+ actual number of buffers allocated.
+
+ .. warning::
+
+ The actual number of allocated buffers may differ from the ``count``
+ given. The client must check the updated value of ``count`` after the
+ call returns.
+
+ .. note::
+
+ To allocate more than the minimum number of OUTPUT buffers (for pipeline
+ depth), the client may query the ``V4L2_CID_MIN_BUFFERS_FOR_OUTPUT``
+ control to get the minimum number of buffers required, and pass the
+ obtained value plus the number of additional buffers needed in the
+ ``count`` field to :c:func:`VIDIOC_REQBUFS`.
+
+ Alternatively, :c:func:`VIDIOC_CREATE_BUFS` can be used to have more
+ control over buffer allocation.
+
+ * **Required fields:**
+
+ ``count``
+ requested number of buffers to allocate; greater than zero.
+
+ ``type``
+ a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+ other fields
+ follow standard semantics.
+
+ * **Return fields:**
+
+ ``count``
+ adjusted to the number of allocated buffers.
+
+8. Begin streaming on both ``OUTPUT`` and ``CAPTURE`` queues via
+ :c:func:`VIDIOC_STREAMON`. This may be performed in any order. The actual
+ encoding process starts when both queues start streaming.
+
+.. note::
+
+ If the client stops the ``CAPTURE`` queue during the encode process and then
+ restarts it again, the encoder will begin generating a stream independent
+ from the stream generated before the stop. The exact constraints depend
+ on the coded format, but may include the following implications:
+
+ * encoded frames produced after the restart must not reference any
+ frames produced before the stop, e.g. no long term references for
+ H.264/HEVC,
+
+ * any headers that must be included in a standalone stream must be
+ produced again, e.g. SPS and PPS for H.264/HEVC.
+
+Encoding
+========
+
+This state is reached after the `Initialization` sequence finishes
+successfully. In this state, the client queues and dequeues buffers to both
+queues via :c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`, following the
+standard semantics.
+
+The content of encoded ``CAPTURE`` buffers depends on the active coded pixel
+format and may be affected by codec-specific extended controls, as stated
+in the documentation of each format.
+
+Both queues operate independently, following standard behavior of V4L2 buffer
+queues and memory-to-memory devices. In addition, the order of encoded frames
+dequeued from the ``CAPTURE`` queue may differ from the order of queuing raw
+frames to the ``OUTPUT`` queue, due to properties of the selected coded format,
+e.g. frame reordering.
+
+The client must not assume any direct relationship between ``CAPTURE`` and
+``OUTPUT`` buffers and any specific timing of buffers becoming
+available to dequeue. Specifically:
+
+* a buffer queued to ``OUTPUT`` may result in more than one buffer produced on
+ ``CAPTURE`` (for example, if returning an encoded frame allowed the encoder
+ to return a frame that preceded it in display, but succeeded it in the decode
+ order; however, there may be other reasons for this as well),
+
+* a buffer queued to ``OUTPUT`` may result in a buffer being produced on
+ ``CAPTURE`` later into encode process, and/or after processing further
+ ``OUTPUT`` buffers, or be returned out of order, e.g. if display
+ reordering is used,
+
+* buffers may become available on the ``CAPTURE`` queue without additional
+ buffers queued to ``OUTPUT`` (e.g. during drain or ``EOS``), because of the
+ ``OUTPUT`` buffers queued in the past whose encoding results are only
+ available at later time, due to specifics of the encoding process,
+
+* buffers queued to ``OUTPUT`` may not become available to dequeue instantly
+ after being encoded into a corresponding ``CAPTURE`` buffer, e.g. if the
+ encoder needs to use the frame as a reference for encoding further frames.
+
+.. note::
+
+ To allow matching encoded ``CAPTURE`` buffers with ``OUTPUT`` buffers they
+ originated from, the client can set the ``timestamp`` field of the
+ :c:type:`v4l2_buffer` struct when queuing an ``OUTPUT`` buffer. The
+ ``CAPTURE`` buffer(s), which resulted from encoding that ``OUTPUT`` buffer
+ will have their ``timestamp`` field set to the same value when dequeued.
+
+ In addition to the straightforward case of one ``OUTPUT`` buffer producing
+ one ``CAPTURE`` buffer, the following cases are defined:
+
+ * one ``OUTPUT`` buffer generates multiple ``CAPTURE`` buffers: the same
+ ``OUTPUT`` timestamp will be copied to multiple ``CAPTURE`` buffers,
+
+ * the encoding order differs from the presentation order (i.e. the
+ ``CAPTURE`` buffers are out-of-order compared to the ``OUTPUT`` buffers):
+ ``CAPTURE`` timestamps will not retain the order of ``OUTPUT`` timestamps.
+
+.. note::
+
+ To let the client distinguish between frame types (keyframes, intermediate
+ frames; the exact list of types depends on the coded format), the
+ ``CAPTURE`` buffers will have corresponding flag bits set in their
+ :c:type:`v4l2_buffer` struct when dequeued. See the documentation of
+ :c:type:`v4l2_buffer` and each coded pixel format for exact list of flags
+ and their meanings.
+
+Should an encoding error occur, it will be reported to the client with the level
+of details depending on the encoder capabilities. Specifically:
+
+* the ``CAPTURE`` buffer (if any) that contains the results of the failed encode
+ operation will be returned with the ``V4L2_BUF_FLAG_ERROR`` flag set,
+
+* if the encoder is able to precisely report the ``OUTPUT`` buffer(s) that triggered
+ the error, such buffer(s) will be returned with the ``V4L2_BUF_FLAG_ERROR`` flag
+ set.
+
+.. note::
+
+ If a ``CAPTURE`` buffer is too small then it is just returned with the
+ ``V4L2_BUF_FLAG_ERROR`` flag set. More work is needed to detect that this
+ error occurred because the buffer was too small, and to provide support to
+ free existing buffers that were too small.
+
+In case of a fatal failure that does not allow the encoding to continue, any
+further operations on corresponding encoder file handle will return the -EIO
+error code. The client may close the file handle and open a new one, or
+alternatively reinitialize the instance by stopping streaming on both queues,
+releasing all buffers and performing the Initialization sequence again.
+
+Encoding Parameter Changes
+==========================
+
+The client is allowed to use :c:func:`VIDIOC_S_CTRL` to change encoder
+parameters at any time. The availability of parameters is encoder-specific
+and the client must query the encoder to find the set of available controls.
+
+The ability to change each parameter during encoding is encoder-specific, as
+per the standard semantics of the V4L2 control interface. The client may
+attempt to set a control during encoding and if the operation fails with the
+-EBUSY error code, the ``CAPTURE`` queue needs to be stopped for the
+configuration change to be allowed. To do this, it may follow the `Drain`
+sequence to avoid losing the already queued/encoded frames.
+
+The timing of parameter updates is encoder-specific, as per the standard
+semantics of the V4L2 control interface. If the client needs to apply the
+parameters exactly at specific frame, using the Request API
+(:ref:`media-request-api`) should be considered, if supported by the encoder.
+
+Drain
+=====
+
+To ensure that all the queued ``OUTPUT`` buffers have been processed and the
+related ``CAPTURE`` buffers are given to the client, the client must follow the
+drain sequence described below. After the drain sequence ends, the client has
+received all encoded frames for all ``OUTPUT`` buffers queued before the
+sequence was started.
+
+1. Begin the drain sequence by issuing :c:func:`VIDIOC_ENCODER_CMD`.
+
+ * **Required fields:**
+
+ ``cmd``
+ set to ``V4L2_ENC_CMD_STOP``.
+
+ ``flags``
+ set to 0.
+
+ ``pts``
+ set to 0.
+
+ .. warning::
+
+ The sequence can be only initiated if both ``OUTPUT`` and ``CAPTURE``
+ queues are streaming. For compatibility reasons, the call to
+ :c:func:`VIDIOC_ENCODER_CMD` will not fail even if any of the queues is
+ not streaming, but at the same time it will not initiate the `Drain`
+ sequence and so the steps described below would not be applicable.
+
+2. Any ``OUTPUT`` buffers queued by the client before the
+ :c:func:`VIDIOC_ENCODER_CMD` was issued will be processed and encoded as
+ normal. The client must continue to handle both queues independently,
+ similarly to normal encode operation. This includes:
+
+ * queuing and dequeuing ``CAPTURE`` buffers, until a buffer marked with the
+ ``V4L2_BUF_FLAG_LAST`` flag is dequeued,
+
+ .. warning::
+
+ The last buffer may be empty (with :c:type:`v4l2_buffer`
+ ``bytesused`` = 0) and in that case it must be ignored by the client,
+ as it does not contain an encoded frame.
+
+ .. note::
+
+ Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer
+ marked with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
+ :c:func:`VIDIOC_DQBUF`.
+
+ * dequeuing processed ``OUTPUT`` buffers, until all the buffers queued
+ before the ``V4L2_ENC_CMD_STOP`` command are dequeued,
+
+ * dequeuing the ``V4L2_EVENT_EOS`` event, if the client subscribes to it.
+
+ .. note::
+
+ For backwards compatibility, the encoder will signal a ``V4L2_EVENT_EOS``
+ event when the last frame has been encoded and all frames are ready to be
+ dequeued. It is deprecated behavior and the client must not rely on it.
+ The ``V4L2_BUF_FLAG_LAST`` buffer flag should be used instead.
+
+3. Once all ``OUTPUT`` buffers queued before the ``V4L2_ENC_CMD_STOP`` call are
+ dequeued and the last ``CAPTURE`` buffer is dequeued, the encoder is stopped
+ and it will accept, but not process any newly queued ``OUTPUT`` buffers
+ until the client issues any of the following operations:
+
+ * ``V4L2_ENC_CMD_START`` - the encoder will not be reset and will resume
+ operation normally, with all the state from before the drain,
+
+ * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+ ``CAPTURE`` queue - the encoder will be reset (see the `Reset` sequence)
+ and then resume encoding,
+
+ * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+ ``OUTPUT`` queue - the encoder will resume operation normally, however any
+ source frames queued to the ``OUTPUT`` queue between ``V4L2_ENC_CMD_STOP``
+ and :c:func:`VIDIOC_STREAMOFF` will be discarded.
+
+.. note::
+
+ Once the drain sequence is initiated, the client needs to drive it to
+ completion, as described by the steps above, unless it aborts the process by
+ issuing :c:func:`VIDIOC_STREAMOFF` on any of the ``OUTPUT`` or ``CAPTURE``
+ queues. The client is not allowed to issue ``V4L2_ENC_CMD_START`` or
+ ``V4L2_ENC_CMD_STOP`` again while the drain sequence is in progress and they
+ will fail with -EBUSY error code if attempted.
+
+ For reference, handling of various corner cases is described below:
+
+ * In case of no buffer in the ``OUTPUT`` queue at the time the
+ ``V4L2_ENC_CMD_STOP`` command was issued, the drain sequence completes
+ immediately and the encoder returns an empty ``CAPTURE`` buffer with the
+ ``V4L2_BUF_FLAG_LAST`` flag set.
+
+ * In case of no buffer in the ``CAPTURE`` queue at the time the drain
+ sequence completes, the next time the client queues a ``CAPTURE`` buffer
+ it is returned at once as an empty buffer with the ``V4L2_BUF_FLAG_LAST``
+ flag set.
+
+ * If :c:func:`VIDIOC_STREAMOFF` is called on the ``CAPTURE`` queue in the
+ middle of the drain sequence, the drain sequence is canceled and all
+ ``CAPTURE`` buffers are implicitly returned to the client.
+
+ * If :c:func:`VIDIOC_STREAMOFF` is called on the ``OUTPUT`` queue in the
+ middle of the drain sequence, the drain sequence completes immediately and
+ next ``CAPTURE`` buffer will be returned empty with the
+ ``V4L2_BUF_FLAG_LAST`` flag set.
+
+ Although not mandatory, the availability of encoder commands may be queried
+ using :c:func:`VIDIOC_TRY_ENCODER_CMD`.
+
+Reset
+=====
+
+The client may want to request the encoder to reinitialize the encoding, so
+that the following stream data becomes independent from the stream data
+generated before. Depending on the coded format, that may imply that:
+
+* encoded frames produced after the restart must not reference any frames
+ produced before the stop, e.g. no long term references for H.264/HEVC,
+
+* any headers that must be included in a standalone stream must be produced
+ again, e.g. SPS and PPS for H.264/HEVC.
+
+This can be achieved by performing the reset sequence.
+
+1. Perform the `Drain` sequence to ensure all the in-flight encoding finishes
+ and respective buffers are dequeued.
+
+2. Stop streaming on the ``CAPTURE`` queue via :c:func:`VIDIOC_STREAMOFF`. This
+ will return all currently queued ``CAPTURE`` buffers to the client, without
+ valid frame data.
+
+3. Start streaming on the ``CAPTURE`` queue via :c:func:`VIDIOC_STREAMON` and
+ continue with regular encoding sequence. The encoded frames produced into
+ ``CAPTURE`` buffers from now on will contain a standalone stream that can be
+ decoded without the need for frames encoded before the reset sequence,
+ starting at the first ``OUTPUT`` buffer queued after issuing the
+ `V4L2_ENC_CMD_STOP` of the `Drain` sequence.
+
+This sequence may be also used to change encoding parameters for encoders
+without the ability to change the parameters on the fly.
+
+Commit Points
+=============
+
+Setting formats and allocating buffers triggers changes in the behavior of the
+encoder.
+
+1. Setting the format on the ``CAPTURE`` queue may change the set of formats
+ supported/advertised on the ``OUTPUT`` queue. In particular, it also means
+ that the ``OUTPUT`` format may be reset and the client must not rely on the
+ previously set format being preserved.
+
+2. Enumerating formats on the ``OUTPUT`` queue always returns only formats
+ supported for the current ``CAPTURE`` format.
+
+3. Setting the format on the ``OUTPUT`` queue does not change the list of
+ formats available on the ``CAPTURE`` queue. An attempt to set the ``OUTPUT``
+ format that is not supported for the currently selected ``CAPTURE`` format
+ will result in the encoder adjusting the requested ``OUTPUT`` format to a
+ supported one.
+
+4. Enumerating formats on the ``CAPTURE`` queue always returns the full set of
+ supported coded formats, irrespective of the current ``OUTPUT`` format.
+
+5. While buffers are allocated on any of the ``OUTPUT`` or ``CAPTURE`` queues,
+ the client must not change the format on the ``CAPTURE`` queue. Drivers will
+ return the -EBUSY error code for any such format change attempt.
+
+To summarize, setting formats and allocation must always start with the
+``CAPTURE`` queue and the ``CAPTURE`` queue is the master that governs the
+set of supported formats for the ``OUTPUT`` queue.