diff options
Diffstat (limited to 'Documentation/hwmon/ltc4260')
| -rw-r--r-- | Documentation/hwmon/ltc4260 | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/hwmon/ltc4260 b/Documentation/hwmon/ltc4260 index c4ff4ad998b2..4c335b6a51d1 100644 --- a/Documentation/hwmon/ltc4260 +++ b/Documentation/hwmon/ltc4260 @@ -2,11 +2,16 @@ Kernel driver ltc4260 ===================== Supported chips: + * Linear Technology LTC4260 + Prefix: 'ltc4260' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/en/datasheet/4260fc.pdf + + http://cds.linear.com/docs/en/datasheet/4260fc.pdf Author: Guenter Roeck <linux@roeck-us.net> @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4260 at address 0x10 -on I2C bus #1: -$ modprobe ltc4260 -$ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4260 + $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -45,6 +51,7 @@ Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. If a different sense resistor is installed, calculate the real current by dividing the reported value by the sense resistor value in mOhm. +======================= ======================= in1_input SOURCE voltage (mV) in1_min_alarm Undervoltage alarm in1_max_alarm Overvoltage alarm @@ -54,3 +61,4 @@ in2_alarm Power bad alarm curr1_input SENSE current (mA) curr1_alarm SENSE overcurrent alarm +======================= ======================= |