summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/lm90.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/lm90.rst')
-rw-r--r--Documentation/hwmon/lm90.rst399
1 files changed, 399 insertions, 0 deletions
diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst
new file mode 100644
index 000000000000..953315987c06
--- /dev/null
+++ b/Documentation/hwmon/lm90.rst
@@ -0,0 +1,399 @@
+Kernel driver lm90
+==================
+
+Supported chips:
+
+ * National Semiconductor LM90
+
+ Prefix: 'lm90'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM90.html
+
+ * National Semiconductor LM89
+
+ Prefix: 'lm89' (no auto-detection)
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/mpf/LM/LM89.html
+
+ * National Semiconductor LM99
+
+ Prefix: 'lm99'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM99.html
+
+ * National Semiconductor LM86
+
+ Prefix: 'lm86'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/mpf/LM/LM86.html
+
+ * Analog Devices ADM1032
+
+ Prefix: 'adm1032'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ http://www.onsemi.com/PowerSolutions/product.do?id=ADM1032
+
+ * Analog Devices ADT7461
+
+ Prefix: 'adt7461'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+
+ * Analog Devices ADT7461A
+
+ Prefix: 'adt7461a'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+
+ * ON Semiconductor NCT1008
+
+ Prefix: 'nct1008'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
+
+ * Maxim MAX6646
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4d
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6647
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6648
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+
+ * Maxim MAX6649
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6657
+
+ Prefix: 'max6657'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6658
+
+ Prefix: 'max6657'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6659
+
+ Prefix: 'max6659'
+
+ Addresses scanned: I2C 0x4c, 0x4d, 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6680
+
+ Prefix: 'max6680'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+
+ * Maxim MAX6681
+
+ Prefix: 'max6680'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+
+ * Maxim MAX6692
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+
+ * Maxim MAX6695
+
+ Prefix: 'max6695'
+
+ Addresses scanned: I2C 0x18
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+
+ * Maxim MAX6696
+
+ Prefix: 'max6695'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+
+ * Winbond/Nuvoton W83L771W/G
+
+ Prefix: 'w83l771'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: No longer available
+
+ * Winbond/Nuvoton W83L771AWG/ASG
+
+ Prefix: 'w83l771'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Not publicly available, can be requested from Nuvoton
+
+ * Philips/NXP SA56004X
+
+ Prefix: 'sa56004'
+
+ Addresses scanned: I2C 0x48 through 0x4F
+
+ Datasheet: Publicly available at NXP website
+
+ http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
+
+ * GMT G781
+
+ Prefix: 'g781'
+
+ Addresses scanned: I2C 0x4c, 0x4d
+
+ Datasheet: Not publicly available from GMT
+
+ * Texas Instruments TMP451
+
+ Prefix: 'tmp451'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at TI website
+
+ http://www.ti.com/litv/pdf/sbos686
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+
+Description
+-----------
+
+The LM90 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to one external diode. It is compatible
+with many other devices, many of which are supported by this driver.
+
+Note that there is no easy way to differentiate between the MAX6657,
+MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
+supported by this driver if the chip is located at address 0x4d or 0x4e,
+or if the chip type is explicitly selected as max6659.
+The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
+can't (and don't need to) be distinguished.
+
+The specificity of this family of chipsets over the ADM1021/LM84
+family is that it features critical limits with hysteresis, and an
+increased resolution of the remote temperature measurement.
+
+The different chipsets of the family are not strictly identical, although
+very similar. For reference, here comes a non-exhaustive list of specific
+features:
+
+LM90:
+ * Filter and alert configuration register at 0xBF.
+ * ALERT is triggered by temperatures over critical limits.
+
+LM86 and LM89:
+ * Same as LM90
+ * Better external channel accuracy
+
+LM99:
+ * Same as LM89
+ * External temperature shifted by 16 degrees down
+
+ADM1032:
+ * Consecutive alert register at 0x22.
+ * Conversion averaging.
+ * Up to 64 conversions/s.
+ * ALERT is triggered by open remote sensor.
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
+
+ADT7461, ADT7461A, NCT1008:
+ * Extended temperature range (breaks compatibility)
+ * Lower resolution for remote temperature
+
+MAX6657 and MAX6658:
+ * Better local resolution
+ * Remote sensor type selection
+
+MAX6659:
+ * Better local resolution
+ * Selectable address
+ * Second critical temperature limit
+ * Remote sensor type selection
+
+MAX6680 and MAX6681:
+ * Selectable address
+ * Remote sensor type selection
+
+MAX6695 and MAX6696:
+ * Better local resolution
+ * Selectable address (max6696)
+ * Second critical temperature limit
+ * Two remote sensors
+
+W83L771W/G
+ * The G variant is lead-free, otherwise similar to the W.
+ * Filter and alert configuration register at 0xBF
+ * Moving average (depending on conversion rate)
+
+W83L771AWG/ASG
+ * Successor of the W83L771W/G, same features.
+ * The AWG and ASG variants only differ in package format.
+ * Diode ideality factor configuration (remote sensor) at 0xE3
+
+SA56004X:
+ * Better local resolution
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree for the local temperature, 0.125 degree for the remote
+temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
+resolution of 0.125 degree for both temperatures.
+
+Each sensor has its own high and low limits, plus a critical limit.
+Additionally, there is a relative hysteresis value common to both critical
+values. To make life easier to user-space applications, two absolute values
+are exported, one for each channel, but these values are of course linked.
+Only the local hysteresis can be set from user-space, and the same delta
+applies to the remote hysteresis.
+
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
+
+SMBus Alert Support
+-------------------
+
+This driver has basic support for SMBus alert. When an alert is received,
+the status register is read and the faulty temperature channel is logged.
+
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
+
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitly disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC can be disabled through
+sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
+to that file to enable PEC again.