summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt10
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt (renamed from Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt)59
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt6
6 files changed, 79 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
index 61466c58faae..d857b67fab72 100644
--- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -9,8 +9,14 @@ The pin controller node must be a subnode of the system controller node.
Required properties:
- compatible: "cortina,gemini-pinctrl"
-Subnodes of the pin controller contain pin control multiplexing set-up.
-Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes.
+Subnodes of the pin controller contain pin control multiplexing set-up
+and pin configuration of individual pins.
+
+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
+and generic pin config nodes.
+
+Supported configurations:
+- skew-delay is supported on the Ethernet pins
Example:
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index f64060908d5a..c7c088d2dd50 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -97,8 +97,8 @@ group spi_quad
- pins 15-16
- functions spi, gpio
-group uart_2
- - pins 9-10
+group uart2
+ - pins 9-10 and 18-19
- functions uart, gpio
Available groups and functions for the South bridge:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 4483cc31e531..ad9bbbba36e9 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level
sleep-hardware-state - indicate this is sleep related state which will be programmed
into the registers for the sleep state.
slew-rate - set the slew rate
+skew-delay - this affects the expected clock skew on input pins
+ and the delay before latching a value to an output
+ pin. Typically indicates how many double-inverters are
+ used to delay the signal.
For example:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index c934106b10aa..9c451c20dda4 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -13,6 +13,7 @@ Required properties:
- "microchip,mcp23s18" for 16 GPIO SPI version
- "microchip,mcp23008" for 8 GPIO I2C version or
- "microchip,mcp23017" for 16 GPIO I2C version of the chip
+ - "microchip,mcp23018" for 16 GPIO I2C version
NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
removed.
- #gpio-cells : Should be two.
@@ -81,3 +82,61 @@ gpiom1: gpio@0 {
reg = <0>;
spi-max-frequency = <1000000>;
};
+
+Pull-up configuration
+=====================
+
+If pins are used as output, they can also be configured with pull-ups. This is
+done with pinctrl.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+ <pinctrl-binding.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+ gpio0 ... gpio7 for the devices with 8 GPIO pins and
+ gpio0 ... gpio15 for the devices with 16 GPIO pins.
+
+Optional properties:
+-------------------
+The following optional property is defined in the pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of this property will leave the configuration
+in its default state.
+ bias-pull-up
+
+Example with pinctrl to pull-up output pins:
+gpio21: gpio@21 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ reg = <0x21>;
+ interrupt-parent = <&socgpio>;
+ interrupts = <0x17 0x8>;
+ interrupt-names = "mcp23017@21 irq";
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ microchip,irq-mirror;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2cgpio0irq &gpio21pullups>;
+
+ gpio21pullups: pinmux {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15";
+ bias-pull-up;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 5b12c57e7f02..5c25fcb29fb5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -15,6 +15,7 @@ PMIC's from Qualcomm.
"qcom,pm8921-gpio"
"qcom,pm8941-gpio"
"qcom,pm8994-gpio"
+ "qcom,pmi8994-gpio"
"qcom,pma8084-gpio"
"qcom,pmi8994-gpio"
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
gpio1-gpio44 for pm8921
gpio1-gpio36 for pm8941
gpio1-gpio22 for pm8994
+ gpio1-gpio10 for pmi8994
gpio1-gpio22 for pma8084
gpio1-gpio10 for pmi8994
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
index 43e21474528a..fd3696eb36bf 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
@@ -12,8 +12,10 @@ Pin controller node
-------------------
Required properties:
- - compatible
- this shall be "renesas,r7s72100-ports".
+ - compatible: should be:
+ - "renesas,r7s72100-ports": for RZ/A1H
+ - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M
+ - "renesas,r7s72102-ports": for RZ/A1L
- reg
address base and length of the memory area where the pin controller