diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
5 files changed, 44 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt index b878a1e305af..ed1456f5c94d 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -16,11 +16,13 @@ Required Properties: - clocks: Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. + Require at least input clock for Xenon IP core. For Armada AP806 and + CP110, the AXI clock is also mandatory. - clock-names: Array of names corresponding to clocks property. The input clock for Xenon IP core should be named as "core". + The input clock for the AXI bus must be named as "axi". - reg: * For "marvell,armada-3700-sdhci", two register areas. @@ -106,8 +108,8 @@ Example: compatible = "marvell,armada-ap806-sdhci"; reg = <0xaa0000 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmc_clk>; - clock-names = "core"; + clocks = <&emmc_clk>,<&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-phy-slow-mode; marvell,xenon-tun-count = <11>; @@ -126,8 +128,8 @@ Example: interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> vqmmc-supply = <&sd_vqmmc_regulator>; vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>; - clock-names = "core"; + clocks = <&sdclk>, <&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-tun-count = <9>; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 7e2dad08a12e..1814fa13f6ab 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,8 +21,9 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and - "mg_clk" (the latter only for armada-7k-pp2). + - AXI clock (only for armada-7k-pp2) +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" + and "axi_clk" (the 2 latter only for armada-7k-pp2). The ethernet ports are represented by subnodes. At least one port is required. @@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; - clock-names = "pp_clk", "gop_clk", "gp_clk"; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 6af8eed1adeb..9c16ee2965a2 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -4,6 +4,7 @@ The device node has following properties. Required properties: - compatible: should be "rockchip,<name>-gamc" + "rockchip,rk3128-gmac": found on RK312x SoCs "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs "rockchip,rk3328-gmac": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000000..830069b1c37c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 4fc96946f81d..cf504d0380ae 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. + - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. |